/[svn]/libgig/trunk/src/gig.cpp
ViewVC logotype

Contents of /libgig/trunk/src/gig.cpp

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1199 - (show annotations) (download)
Sun May 20 10:11:39 2007 UTC (16 years, 10 months ago) by persson
File size: 156638 byte(s)
* added write support for the 3crc and einf chunks
* two previously unknown fields in dimension definition are now saved
* added constants for gig file versions

1 /***************************************************************************
2 * *
3 * libgig - C++ cross-platform Gigasampler format file access library *
4 * *
5 * Copyright (C) 2003-2007 by Christian Schoenebeck *
6 * <cuse@users.sourceforge.net> *
7 * *
8 * This library is free software; you can redistribute it and/or modify *
9 * it under the terms of the GNU General Public License as published by *
10 * the Free Software Foundation; either version 2 of the License, or *
11 * (at your option) any later version. *
12 * *
13 * This library is distributed in the hope that it will be useful, *
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
16 * GNU General Public License for more details. *
17 * *
18 * You should have received a copy of the GNU General Public License *
19 * along with this library; if not, write to the Free Software *
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, *
21 * MA 02111-1307 USA *
22 ***************************************************************************/
23
24 #include "gig.h"
25
26 #include "helper.h"
27
28 #include <math.h>
29 #include <iostream>
30
31 /// Initial size of the sample buffer which is used for decompression of
32 /// compressed sample wave streams - this value should always be bigger than
33 /// the biggest sample piece expected to be read by the sampler engine,
34 /// otherwise the buffer size will be raised at runtime and thus the buffer
35 /// reallocated which is time consuming and unefficient.
36 #define INITIAL_SAMPLE_BUFFER_SIZE 512000 // 512 kB
37
38 /** (so far) every exponential paramater in the gig format has a basis of 1.000000008813822 */
39 #define GIG_EXP_DECODE(x) (pow(1.000000008813822, x))
40 #define GIG_EXP_ENCODE(x) (log(x) / log(1.000000008813822))
41 #define GIG_PITCH_TRACK_EXTRACT(x) (!(x & 0x01))
42 #define GIG_PITCH_TRACK_ENCODE(x) ((x) ? 0x00 : 0x01)
43 #define GIG_VCF_RESONANCE_CTRL_EXTRACT(x) ((x >> 4) & 0x03)
44 #define GIG_VCF_RESONANCE_CTRL_ENCODE(x) ((x & 0x03) << 4)
45 #define GIG_EG_CTR_ATTACK_INFLUENCE_EXTRACT(x) ((x >> 1) & 0x03)
46 #define GIG_EG_CTR_DECAY_INFLUENCE_EXTRACT(x) ((x >> 3) & 0x03)
47 #define GIG_EG_CTR_RELEASE_INFLUENCE_EXTRACT(x) ((x >> 5) & 0x03)
48 #define GIG_EG_CTR_ATTACK_INFLUENCE_ENCODE(x) ((x & 0x03) << 1)
49 #define GIG_EG_CTR_DECAY_INFLUENCE_ENCODE(x) ((x & 0x03) << 3)
50 #define GIG_EG_CTR_RELEASE_INFLUENCE_ENCODE(x) ((x & 0x03) << 5)
51
52 namespace gig {
53
54 // *************** progress_t ***************
55 // *
56
57 progress_t::progress_t() {
58 callback = NULL;
59 custom = NULL;
60 __range_min = 0.0f;
61 __range_max = 1.0f;
62 }
63
64 // private helper function to convert progress of a subprocess into the global progress
65 static void __notify_progress(progress_t* pProgress, float subprogress) {
66 if (pProgress && pProgress->callback) {
67 const float totalrange = pProgress->__range_max - pProgress->__range_min;
68 const float totalprogress = pProgress->__range_min + subprogress * totalrange;
69 pProgress->factor = totalprogress;
70 pProgress->callback(pProgress); // now actually notify about the progress
71 }
72 }
73
74 // private helper function to divide a progress into subprogresses
75 static void __divide_progress(progress_t* pParentProgress, progress_t* pSubProgress, float totalTasks, float currentTask) {
76 if (pParentProgress && pParentProgress->callback) {
77 const float totalrange = pParentProgress->__range_max - pParentProgress->__range_min;
78 pSubProgress->callback = pParentProgress->callback;
79 pSubProgress->custom = pParentProgress->custom;
80 pSubProgress->__range_min = pParentProgress->__range_min + totalrange * currentTask / totalTasks;
81 pSubProgress->__range_max = pSubProgress->__range_min + totalrange / totalTasks;
82 }
83 }
84
85
86 // *************** Internal functions for sample decompression ***************
87 // *
88
89 namespace {
90
91 inline int get12lo(const unsigned char* pSrc)
92 {
93 const int x = pSrc[0] | (pSrc[1] & 0x0f) << 8;
94 return x & 0x800 ? x - 0x1000 : x;
95 }
96
97 inline int get12hi(const unsigned char* pSrc)
98 {
99 const int x = pSrc[1] >> 4 | pSrc[2] << 4;
100 return x & 0x800 ? x - 0x1000 : x;
101 }
102
103 inline int16_t get16(const unsigned char* pSrc)
104 {
105 return int16_t(pSrc[0] | pSrc[1] << 8);
106 }
107
108 inline int get24(const unsigned char* pSrc)
109 {
110 const int x = pSrc[0] | pSrc[1] << 8 | pSrc[2] << 16;
111 return x & 0x800000 ? x - 0x1000000 : x;
112 }
113
114 inline void store24(unsigned char* pDst, int x)
115 {
116 pDst[0] = x;
117 pDst[1] = x >> 8;
118 pDst[2] = x >> 16;
119 }
120
121 void Decompress16(int compressionmode, const unsigned char* params,
122 int srcStep, int dstStep,
123 const unsigned char* pSrc, int16_t* pDst,
124 unsigned long currentframeoffset,
125 unsigned long copysamples)
126 {
127 switch (compressionmode) {
128 case 0: // 16 bit uncompressed
129 pSrc += currentframeoffset * srcStep;
130 while (copysamples) {
131 *pDst = get16(pSrc);
132 pDst += dstStep;
133 pSrc += srcStep;
134 copysamples--;
135 }
136 break;
137
138 case 1: // 16 bit compressed to 8 bit
139 int y = get16(params);
140 int dy = get16(params + 2);
141 while (currentframeoffset) {
142 dy -= int8_t(*pSrc);
143 y -= dy;
144 pSrc += srcStep;
145 currentframeoffset--;
146 }
147 while (copysamples) {
148 dy -= int8_t(*pSrc);
149 y -= dy;
150 *pDst = y;
151 pDst += dstStep;
152 pSrc += srcStep;
153 copysamples--;
154 }
155 break;
156 }
157 }
158
159 void Decompress24(int compressionmode, const unsigned char* params,
160 int dstStep, const unsigned char* pSrc, uint8_t* pDst,
161 unsigned long currentframeoffset,
162 unsigned long copysamples, int truncatedBits)
163 {
164 int y, dy, ddy, dddy;
165
166 #define GET_PARAMS(params) \
167 y = get24(params); \
168 dy = y - get24((params) + 3); \
169 ddy = get24((params) + 6); \
170 dddy = get24((params) + 9)
171
172 #define SKIP_ONE(x) \
173 dddy -= (x); \
174 ddy -= dddy; \
175 dy = -dy - ddy; \
176 y += dy
177
178 #define COPY_ONE(x) \
179 SKIP_ONE(x); \
180 store24(pDst, y << truncatedBits); \
181 pDst += dstStep
182
183 switch (compressionmode) {
184 case 2: // 24 bit uncompressed
185 pSrc += currentframeoffset * 3;
186 while (copysamples) {
187 store24(pDst, get24(pSrc) << truncatedBits);
188 pDst += dstStep;
189 pSrc += 3;
190 copysamples--;
191 }
192 break;
193
194 case 3: // 24 bit compressed to 16 bit
195 GET_PARAMS(params);
196 while (currentframeoffset) {
197 SKIP_ONE(get16(pSrc));
198 pSrc += 2;
199 currentframeoffset--;
200 }
201 while (copysamples) {
202 COPY_ONE(get16(pSrc));
203 pSrc += 2;
204 copysamples--;
205 }
206 break;
207
208 case 4: // 24 bit compressed to 12 bit
209 GET_PARAMS(params);
210 while (currentframeoffset > 1) {
211 SKIP_ONE(get12lo(pSrc));
212 SKIP_ONE(get12hi(pSrc));
213 pSrc += 3;
214 currentframeoffset -= 2;
215 }
216 if (currentframeoffset) {
217 SKIP_ONE(get12lo(pSrc));
218 currentframeoffset--;
219 if (copysamples) {
220 COPY_ONE(get12hi(pSrc));
221 pSrc += 3;
222 copysamples--;
223 }
224 }
225 while (copysamples > 1) {
226 COPY_ONE(get12lo(pSrc));
227 COPY_ONE(get12hi(pSrc));
228 pSrc += 3;
229 copysamples -= 2;
230 }
231 if (copysamples) {
232 COPY_ONE(get12lo(pSrc));
233 }
234 break;
235
236 case 5: // 24 bit compressed to 8 bit
237 GET_PARAMS(params);
238 while (currentframeoffset) {
239 SKIP_ONE(int8_t(*pSrc++));
240 currentframeoffset--;
241 }
242 while (copysamples) {
243 COPY_ONE(int8_t(*pSrc++));
244 copysamples--;
245 }
246 break;
247 }
248 }
249
250 const int bytesPerFrame[] = { 4096, 2052, 768, 524, 396, 268 };
251 const int bytesPerFrameNoHdr[] = { 4096, 2048, 768, 512, 384, 256 };
252 const int headerSize[] = { 0, 4, 0, 12, 12, 12 };
253 const int bitsPerSample[] = { 16, 8, 24, 16, 12, 8 };
254 }
255
256
257
258 // *************** Other Internal functions ***************
259 // *
260
261 static split_type_t __resolveSplitType(dimension_t dimension) {
262 return (
263 dimension == dimension_layer ||
264 dimension == dimension_samplechannel ||
265 dimension == dimension_releasetrigger ||
266 dimension == dimension_keyboard ||
267 dimension == dimension_roundrobin ||
268 dimension == dimension_random ||
269 dimension == dimension_smartmidi ||
270 dimension == dimension_roundrobinkeyboard
271 ) ? split_type_bit : split_type_normal;
272 }
273
274 static int __resolveZoneSize(dimension_def_t& dimension_definition) {
275 return (dimension_definition.split_type == split_type_normal)
276 ? int(128.0 / dimension_definition.zones) : 0;
277 }
278
279
280
281 // *************** CRC ***************
282 // *
283
284 const uint32_t* CRC::table(initTable());
285
286 uint32_t* CRC::initTable() {
287 uint32_t* res = new uint32_t[256];
288
289 for (int i = 0 ; i < 256 ; i++) {
290 uint32_t c = i;
291 for (int j = 0 ; j < 8 ; j++) {
292 c = (c & 1) ? 0xedb88320 ^ (c >> 1) : c >> 1;
293 }
294 res[i] = c;
295 }
296 return res;
297 }
298
299
300
301 // *************** Sample ***************
302 // *
303
304 unsigned int Sample::Instances = 0;
305 buffer_t Sample::InternalDecompressionBuffer;
306
307 /** @brief Constructor.
308 *
309 * Load an existing sample or create a new one. A 'wave' list chunk must
310 * be given to this constructor. In case the given 'wave' list chunk
311 * contains a 'fmt', 'data' (and optionally a '3gix', 'smpl') chunk, the
312 * format and sample data will be loaded from there, otherwise default
313 * values will be used and those chunks will be created when
314 * File::Save() will be called later on.
315 *
316 * @param pFile - pointer to gig::File where this sample is
317 * located (or will be located)
318 * @param waveList - pointer to 'wave' list chunk which is (or
319 * will be) associated with this sample
320 * @param WavePoolOffset - offset of this sample data from wave pool
321 * ('wvpl') list chunk
322 * @param fileNo - number of an extension file where this sample
323 * is located, 0 otherwise
324 */
325 Sample::Sample(File* pFile, RIFF::List* waveList, unsigned long WavePoolOffset, unsigned long fileNo) : DLS::Sample((DLS::File*) pFile, waveList, WavePoolOffset) {
326 static const DLS::Info::FixedStringLength fixedStringLengths[] = {
327 { CHUNK_ID_INAM, 64 },
328 { 0, 0 }
329 };
330 pInfo->FixedStringLengths = fixedStringLengths;
331 Instances++;
332 FileNo = fileNo;
333
334 pCk3gix = waveList->GetSubChunk(CHUNK_ID_3GIX);
335 if (pCk3gix) {
336 uint16_t iSampleGroup = pCk3gix->ReadInt16();
337 pGroup = pFile->GetGroup(iSampleGroup);
338 } else { // '3gix' chunk missing
339 // by default assigned to that mandatory "Default Group"
340 pGroup = pFile->GetGroup(0);
341 }
342
343 pCkSmpl = waveList->GetSubChunk(CHUNK_ID_SMPL);
344 if (pCkSmpl) {
345 Manufacturer = pCkSmpl->ReadInt32();
346 Product = pCkSmpl->ReadInt32();
347 SamplePeriod = pCkSmpl->ReadInt32();
348 MIDIUnityNote = pCkSmpl->ReadInt32();
349 FineTune = pCkSmpl->ReadInt32();
350 pCkSmpl->Read(&SMPTEFormat, 1, 4);
351 SMPTEOffset = pCkSmpl->ReadInt32();
352 Loops = pCkSmpl->ReadInt32();
353 pCkSmpl->ReadInt32(); // manufByt
354 LoopID = pCkSmpl->ReadInt32();
355 pCkSmpl->Read(&LoopType, 1, 4);
356 LoopStart = pCkSmpl->ReadInt32();
357 LoopEnd = pCkSmpl->ReadInt32();
358 LoopFraction = pCkSmpl->ReadInt32();
359 LoopPlayCount = pCkSmpl->ReadInt32();
360 } else { // 'smpl' chunk missing
361 // use default values
362 Manufacturer = 0;
363 Product = 0;
364 SamplePeriod = uint32_t(1000000000.0 / SamplesPerSecond + 0.5);
365 MIDIUnityNote = 64;
366 FineTune = 0;
367 SMPTEFormat = smpte_format_no_offset;
368 SMPTEOffset = 0;
369 Loops = 0;
370 LoopID = 0;
371 LoopType = loop_type_normal;
372 LoopStart = 0;
373 LoopEnd = 0;
374 LoopFraction = 0;
375 LoopPlayCount = 0;
376 }
377
378 FrameTable = NULL;
379 SamplePos = 0;
380 RAMCache.Size = 0;
381 RAMCache.pStart = NULL;
382 RAMCache.NullExtensionSize = 0;
383
384 if (BitDepth > 24) throw gig::Exception("Only samples up to 24 bit supported");
385
386 RIFF::Chunk* ewav = waveList->GetSubChunk(CHUNK_ID_EWAV);
387 Compressed = ewav;
388 Dithered = false;
389 TruncatedBits = 0;
390 if (Compressed) {
391 uint32_t version = ewav->ReadInt32();
392 if (version == 3 && BitDepth == 24) {
393 Dithered = ewav->ReadInt32();
394 ewav->SetPos(Channels == 2 ? 84 : 64);
395 TruncatedBits = ewav->ReadInt32();
396 }
397 ScanCompressedSample();
398 }
399
400 // we use a buffer for decompression and for truncating 24 bit samples to 16 bit
401 if ((Compressed || BitDepth == 24) && !InternalDecompressionBuffer.Size) {
402 InternalDecompressionBuffer.pStart = new unsigned char[INITIAL_SAMPLE_BUFFER_SIZE];
403 InternalDecompressionBuffer.Size = INITIAL_SAMPLE_BUFFER_SIZE;
404 }
405 FrameOffset = 0; // just for streaming compressed samples
406
407 LoopSize = LoopEnd - LoopStart + 1;
408 }
409
410 /**
411 * Apply sample and its settings to the respective RIFF chunks. You have
412 * to call File::Save() to make changes persistent.
413 *
414 * Usually there is absolutely no need to call this method explicitly.
415 * It will be called automatically when File::Save() was called.
416 *
417 * @throws DLS::Exception if FormatTag != DLS_WAVE_FORMAT_PCM or no sample data
418 * was provided yet
419 * @throws gig::Exception if there is any invalid sample setting
420 */
421 void Sample::UpdateChunks() {
422 // first update base class's chunks
423 DLS::Sample::UpdateChunks();
424
425 // make sure 'smpl' chunk exists
426 pCkSmpl = pWaveList->GetSubChunk(CHUNK_ID_SMPL);
427 if (!pCkSmpl) {
428 pCkSmpl = pWaveList->AddSubChunk(CHUNK_ID_SMPL, 60);
429 memset(pCkSmpl->LoadChunkData(), 0, 60);
430 }
431 // update 'smpl' chunk
432 uint8_t* pData = (uint8_t*) pCkSmpl->LoadChunkData();
433 SamplePeriod = uint32_t(1000000000.0 / SamplesPerSecond + 0.5);
434 store32(&pData[0], Manufacturer);
435 store32(&pData[4], Product);
436 store32(&pData[8], SamplePeriod);
437 store32(&pData[12], MIDIUnityNote);
438 store32(&pData[16], FineTune);
439 store32(&pData[20], SMPTEFormat);
440 store32(&pData[24], SMPTEOffset);
441 store32(&pData[28], Loops);
442
443 // we skip 'manufByt' for now (4 bytes)
444
445 store32(&pData[36], LoopID);
446 store32(&pData[40], LoopType);
447 store32(&pData[44], LoopStart);
448 store32(&pData[48], LoopEnd);
449 store32(&pData[52], LoopFraction);
450 store32(&pData[56], LoopPlayCount);
451
452 // make sure '3gix' chunk exists
453 pCk3gix = pWaveList->GetSubChunk(CHUNK_ID_3GIX);
454 if (!pCk3gix) pCk3gix = pWaveList->AddSubChunk(CHUNK_ID_3GIX, 4);
455 // determine appropriate sample group index (to be stored in chunk)
456 uint16_t iSampleGroup = 0; // 0 refers to default sample group
457 File* pFile = static_cast<File*>(pParent);
458 if (pFile->pGroups) {
459 std::list<Group*>::iterator iter = pFile->pGroups->begin();
460 std::list<Group*>::iterator end = pFile->pGroups->end();
461 for (int i = 0; iter != end; i++, iter++) {
462 if (*iter == pGroup) {
463 iSampleGroup = i;
464 break; // found
465 }
466 }
467 }
468 // update '3gix' chunk
469 pData = (uint8_t*) pCk3gix->LoadChunkData();
470 store16(&pData[0], iSampleGroup);
471 }
472
473 /// Scans compressed samples for mandatory informations (e.g. actual number of total sample points).
474 void Sample::ScanCompressedSample() {
475 //TODO: we have to add some more scans here (e.g. determine compression rate)
476 this->SamplesTotal = 0;
477 std::list<unsigned long> frameOffsets;
478
479 SamplesPerFrame = BitDepth == 24 ? 256 : 2048;
480 WorstCaseFrameSize = SamplesPerFrame * FrameSize + Channels; // +Channels for compression flag
481
482 // Scanning
483 pCkData->SetPos(0);
484 if (Channels == 2) { // Stereo
485 for (int i = 0 ; ; i++) {
486 // for 24 bit samples every 8:th frame offset is
487 // stored, to save some memory
488 if (BitDepth != 24 || (i & 7) == 0) frameOffsets.push_back(pCkData->GetPos());
489
490 const int mode_l = pCkData->ReadUint8();
491 const int mode_r = pCkData->ReadUint8();
492 if (mode_l > 5 || mode_r > 5) throw gig::Exception("Unknown compression mode");
493 const unsigned long frameSize = bytesPerFrame[mode_l] + bytesPerFrame[mode_r];
494
495 if (pCkData->RemainingBytes() <= frameSize) {
496 SamplesInLastFrame =
497 ((pCkData->RemainingBytes() - headerSize[mode_l] - headerSize[mode_r]) << 3) /
498 (bitsPerSample[mode_l] + bitsPerSample[mode_r]);
499 SamplesTotal += SamplesInLastFrame;
500 break;
501 }
502 SamplesTotal += SamplesPerFrame;
503 pCkData->SetPos(frameSize, RIFF::stream_curpos);
504 }
505 }
506 else { // Mono
507 for (int i = 0 ; ; i++) {
508 if (BitDepth != 24 || (i & 7) == 0) frameOffsets.push_back(pCkData->GetPos());
509
510 const int mode = pCkData->ReadUint8();
511 if (mode > 5) throw gig::Exception("Unknown compression mode");
512 const unsigned long frameSize = bytesPerFrame[mode];
513
514 if (pCkData->RemainingBytes() <= frameSize) {
515 SamplesInLastFrame =
516 ((pCkData->RemainingBytes() - headerSize[mode]) << 3) / bitsPerSample[mode];
517 SamplesTotal += SamplesInLastFrame;
518 break;
519 }
520 SamplesTotal += SamplesPerFrame;
521 pCkData->SetPos(frameSize, RIFF::stream_curpos);
522 }
523 }
524 pCkData->SetPos(0);
525
526 // Build the frames table (which is used for fast resolving of a frame's chunk offset)
527 if (FrameTable) delete[] FrameTable;
528 FrameTable = new unsigned long[frameOffsets.size()];
529 std::list<unsigned long>::iterator end = frameOffsets.end();
530 std::list<unsigned long>::iterator iter = frameOffsets.begin();
531 for (int i = 0; iter != end; i++, iter++) {
532 FrameTable[i] = *iter;
533 }
534 }
535
536 /**
537 * Loads (and uncompresses if needed) the whole sample wave into RAM. Use
538 * ReleaseSampleData() to free the memory if you don't need the cached
539 * sample data anymore.
540 *
541 * @returns buffer_t structure with start address and size of the buffer
542 * in bytes
543 * @see ReleaseSampleData(), Read(), SetPos()
544 */
545 buffer_t Sample::LoadSampleData() {
546 return LoadSampleDataWithNullSamplesExtension(this->SamplesTotal, 0); // 0 amount of NullSamples
547 }
548
549 /**
550 * Reads (uncompresses if needed) and caches the first \a SampleCount
551 * numbers of SamplePoints in RAM. Use ReleaseSampleData() to free the
552 * memory space if you don't need the cached samples anymore. There is no
553 * guarantee that exactly \a SampleCount samples will be cached; this is
554 * not an error. The size will be eventually truncated e.g. to the
555 * beginning of a frame of a compressed sample. This is done for
556 * efficiency reasons while streaming the wave by your sampler engine
557 * later. Read the <i>Size</i> member of the <i>buffer_t</i> structure
558 * that will be returned to determine the actual cached samples, but note
559 * that the size is given in bytes! You get the number of actually cached
560 * samples by dividing it by the frame size of the sample:
561 * @code
562 * buffer_t buf = pSample->LoadSampleData(acquired_samples);
563 * long cachedsamples = buf.Size / pSample->FrameSize;
564 * @endcode
565 *
566 * @param SampleCount - number of sample points to load into RAM
567 * @returns buffer_t structure with start address and size of
568 * the cached sample data in bytes
569 * @see ReleaseSampleData(), Read(), SetPos()
570 */
571 buffer_t Sample::LoadSampleData(unsigned long SampleCount) {
572 return LoadSampleDataWithNullSamplesExtension(SampleCount, 0); // 0 amount of NullSamples
573 }
574
575 /**
576 * Loads (and uncompresses if needed) the whole sample wave into RAM. Use
577 * ReleaseSampleData() to free the memory if you don't need the cached
578 * sample data anymore.
579 * The method will add \a NullSamplesCount silence samples past the
580 * official buffer end (this won't affect the 'Size' member of the
581 * buffer_t structure, that means 'Size' always reflects the size of the
582 * actual sample data, the buffer might be bigger though). Silence
583 * samples past the official buffer are needed for differential
584 * algorithms that always have to take subsequent samples into account
585 * (resampling/interpolation would be an important example) and avoids
586 * memory access faults in such cases.
587 *
588 * @param NullSamplesCount - number of silence samples the buffer should
589 * be extended past it's data end
590 * @returns buffer_t structure with start address and
591 * size of the buffer in bytes
592 * @see ReleaseSampleData(), Read(), SetPos()
593 */
594 buffer_t Sample::LoadSampleDataWithNullSamplesExtension(uint NullSamplesCount) {
595 return LoadSampleDataWithNullSamplesExtension(this->SamplesTotal, NullSamplesCount);
596 }
597
598 /**
599 * Reads (uncompresses if needed) and caches the first \a SampleCount
600 * numbers of SamplePoints in RAM. Use ReleaseSampleData() to free the
601 * memory space if you don't need the cached samples anymore. There is no
602 * guarantee that exactly \a SampleCount samples will be cached; this is
603 * not an error. The size will be eventually truncated e.g. to the
604 * beginning of a frame of a compressed sample. This is done for
605 * efficiency reasons while streaming the wave by your sampler engine
606 * later. Read the <i>Size</i> member of the <i>buffer_t</i> structure
607 * that will be returned to determine the actual cached samples, but note
608 * that the size is given in bytes! You get the number of actually cached
609 * samples by dividing it by the frame size of the sample:
610 * @code
611 * buffer_t buf = pSample->LoadSampleDataWithNullSamplesExtension(acquired_samples, null_samples);
612 * long cachedsamples = buf.Size / pSample->FrameSize;
613 * @endcode
614 * The method will add \a NullSamplesCount silence samples past the
615 * official buffer end (this won't affect the 'Size' member of the
616 * buffer_t structure, that means 'Size' always reflects the size of the
617 * actual sample data, the buffer might be bigger though). Silence
618 * samples past the official buffer are needed for differential
619 * algorithms that always have to take subsequent samples into account
620 * (resampling/interpolation would be an important example) and avoids
621 * memory access faults in such cases.
622 *
623 * @param SampleCount - number of sample points to load into RAM
624 * @param NullSamplesCount - number of silence samples the buffer should
625 * be extended past it's data end
626 * @returns buffer_t structure with start address and
627 * size of the cached sample data in bytes
628 * @see ReleaseSampleData(), Read(), SetPos()
629 */
630 buffer_t Sample::LoadSampleDataWithNullSamplesExtension(unsigned long SampleCount, uint NullSamplesCount) {
631 if (SampleCount > this->SamplesTotal) SampleCount = this->SamplesTotal;
632 if (RAMCache.pStart) delete[] (int8_t*) RAMCache.pStart;
633 unsigned long allocationsize = (SampleCount + NullSamplesCount) * this->FrameSize;
634 RAMCache.pStart = new int8_t[allocationsize];
635 RAMCache.Size = Read(RAMCache.pStart, SampleCount) * this->FrameSize;
636 RAMCache.NullExtensionSize = allocationsize - RAMCache.Size;
637 // fill the remaining buffer space with silence samples
638 memset((int8_t*)RAMCache.pStart + RAMCache.Size, 0, RAMCache.NullExtensionSize);
639 return GetCache();
640 }
641
642 /**
643 * Returns current cached sample points. A buffer_t structure will be
644 * returned which contains address pointer to the begin of the cache and
645 * the size of the cached sample data in bytes. Use
646 * <i>LoadSampleData()</i> to cache a specific amount of sample points in
647 * RAM.
648 *
649 * @returns buffer_t structure with current cached sample points
650 * @see LoadSampleData();
651 */
652 buffer_t Sample::GetCache() {
653 // return a copy of the buffer_t structure
654 buffer_t result;
655 result.Size = this->RAMCache.Size;
656 result.pStart = this->RAMCache.pStart;
657 result.NullExtensionSize = this->RAMCache.NullExtensionSize;
658 return result;
659 }
660
661 /**
662 * Frees the cached sample from RAM if loaded with
663 * <i>LoadSampleData()</i> previously.
664 *
665 * @see LoadSampleData();
666 */
667 void Sample::ReleaseSampleData() {
668 if (RAMCache.pStart) delete[] (int8_t*) RAMCache.pStart;
669 RAMCache.pStart = NULL;
670 RAMCache.Size = 0;
671 }
672
673 /** @brief Resize sample.
674 *
675 * Resizes the sample's wave form data, that is the actual size of
676 * sample wave data possible to be written for this sample. This call
677 * will return immediately and just schedule the resize operation. You
678 * should call File::Save() to actually perform the resize operation(s)
679 * "physically" to the file. As this can take a while on large files, it
680 * is recommended to call Resize() first on all samples which have to be
681 * resized and finally to call File::Save() to perform all those resize
682 * operations in one rush.
683 *
684 * The actual size (in bytes) is dependant to the current FrameSize
685 * value. You may want to set FrameSize before calling Resize().
686 *
687 * <b>Caution:</b> You cannot directly write (i.e. with Write()) to
688 * enlarged samples before calling File::Save() as this might exceed the
689 * current sample's boundary!
690 *
691 * Also note: only DLS_WAVE_FORMAT_PCM is currently supported, that is
692 * FormatTag must be DLS_WAVE_FORMAT_PCM. Trying to resize samples with
693 * other formats will fail!
694 *
695 * @param iNewSize - new sample wave data size in sample points (must be
696 * greater than zero)
697 * @throws DLS::Excecption if FormatTag != DLS_WAVE_FORMAT_PCM
698 * or if \a iNewSize is less than 1
699 * @throws gig::Exception if existing sample is compressed
700 * @see DLS::Sample::GetSize(), DLS::Sample::FrameSize,
701 * DLS::Sample::FormatTag, File::Save()
702 */
703 void Sample::Resize(int iNewSize) {
704 if (Compressed) throw gig::Exception("There is no support for modifying compressed samples (yet)");
705 DLS::Sample::Resize(iNewSize);
706 }
707
708 /**
709 * Sets the position within the sample (in sample points, not in
710 * bytes). Use this method and <i>Read()</i> if you don't want to load
711 * the sample into RAM, thus for disk streaming.
712 *
713 * Although the original Gigasampler engine doesn't allow positioning
714 * within compressed samples, I decided to implement it. Even though
715 * the Gigasampler format doesn't allow to define loops for compressed
716 * samples at the moment, positioning within compressed samples might be
717 * interesting for some sampler engines though. The only drawback about
718 * my decision is that it takes longer to load compressed gig Files on
719 * startup, because it's neccessary to scan the samples for some
720 * mandatory informations. But I think as it doesn't affect the runtime
721 * efficiency, nobody will have a problem with that.
722 *
723 * @param SampleCount number of sample points to jump
724 * @param Whence optional: to which relation \a SampleCount refers
725 * to, if omited <i>RIFF::stream_start</i> is assumed
726 * @returns the new sample position
727 * @see Read()
728 */
729 unsigned long Sample::SetPos(unsigned long SampleCount, RIFF::stream_whence_t Whence) {
730 if (Compressed) {
731 switch (Whence) {
732 case RIFF::stream_curpos:
733 this->SamplePos += SampleCount;
734 break;
735 case RIFF::stream_end:
736 this->SamplePos = this->SamplesTotal - 1 - SampleCount;
737 break;
738 case RIFF::stream_backward:
739 this->SamplePos -= SampleCount;
740 break;
741 case RIFF::stream_start: default:
742 this->SamplePos = SampleCount;
743 break;
744 }
745 if (this->SamplePos > this->SamplesTotal) this->SamplePos = this->SamplesTotal;
746
747 unsigned long frame = this->SamplePos / 2048; // to which frame to jump
748 this->FrameOffset = this->SamplePos % 2048; // offset (in sample points) within that frame
749 pCkData->SetPos(FrameTable[frame]); // set chunk pointer to the start of sought frame
750 return this->SamplePos;
751 }
752 else { // not compressed
753 unsigned long orderedBytes = SampleCount * this->FrameSize;
754 unsigned long result = pCkData->SetPos(orderedBytes, Whence);
755 return (result == orderedBytes) ? SampleCount
756 : result / this->FrameSize;
757 }
758 }
759
760 /**
761 * Returns the current position in the sample (in sample points).
762 */
763 unsigned long Sample::GetPos() {
764 if (Compressed) return SamplePos;
765 else return pCkData->GetPos() / FrameSize;
766 }
767
768 /**
769 * Reads \a SampleCount number of sample points from the position stored
770 * in \a pPlaybackState into the buffer pointed by \a pBuffer and moves
771 * the position within the sample respectively, this method honors the
772 * looping informations of the sample (if any). The sample wave stream
773 * will be decompressed on the fly if using a compressed sample. Use this
774 * method if you don't want to load the sample into RAM, thus for disk
775 * streaming. All this methods needs to know to proceed with streaming
776 * for the next time you call this method is stored in \a pPlaybackState.
777 * You have to allocate and initialize the playback_state_t structure by
778 * yourself before you use it to stream a sample:
779 * @code
780 * gig::playback_state_t playbackstate;
781 * playbackstate.position = 0;
782 * playbackstate.reverse = false;
783 * playbackstate.loop_cycles_left = pSample->LoopPlayCount;
784 * @endcode
785 * You don't have to take care of things like if there is actually a loop
786 * defined or if the current read position is located within a loop area.
787 * The method already handles such cases by itself.
788 *
789 * <b>Caution:</b> If you are using more than one streaming thread, you
790 * have to use an external decompression buffer for <b>EACH</b>
791 * streaming thread to avoid race conditions and crashes!
792 *
793 * @param pBuffer destination buffer
794 * @param SampleCount number of sample points to read
795 * @param pPlaybackState will be used to store and reload the playback
796 * state for the next ReadAndLoop() call
797 * @param pDimRgn dimension region with looping information
798 * @param pExternalDecompressionBuffer (optional) external buffer to use for decompression
799 * @returns number of successfully read sample points
800 * @see CreateDecompressionBuffer()
801 */
802 unsigned long Sample::ReadAndLoop(void* pBuffer, unsigned long SampleCount, playback_state_t* pPlaybackState,
803 DimensionRegion* pDimRgn, buffer_t* pExternalDecompressionBuffer) {
804 unsigned long samplestoread = SampleCount, totalreadsamples = 0, readsamples, samplestoloopend;
805 uint8_t* pDst = (uint8_t*) pBuffer;
806
807 SetPos(pPlaybackState->position); // recover position from the last time
808
809 if (pDimRgn->SampleLoops) { // honor looping if there are loop points defined
810
811 const DLS::sample_loop_t& loop = pDimRgn->pSampleLoops[0];
812 const uint32_t loopEnd = loop.LoopStart + loop.LoopLength;
813
814 if (GetPos() <= loopEnd) {
815 switch (loop.LoopType) {
816
817 case loop_type_bidirectional: { //TODO: not tested yet!
818 do {
819 // if not endless loop check if max. number of loop cycles have been passed
820 if (this->LoopPlayCount && !pPlaybackState->loop_cycles_left) break;
821
822 if (!pPlaybackState->reverse) { // forward playback
823 do {
824 samplestoloopend = loopEnd - GetPos();
825 readsamples = Read(&pDst[totalreadsamples * this->FrameSize], Min(samplestoread, samplestoloopend), pExternalDecompressionBuffer);
826 samplestoread -= readsamples;
827 totalreadsamples += readsamples;
828 if (readsamples == samplestoloopend) {
829 pPlaybackState->reverse = true;
830 break;
831 }
832 } while (samplestoread && readsamples);
833 }
834 else { // backward playback
835
836 // as we can only read forward from disk, we have to
837 // determine the end position within the loop first,
838 // read forward from that 'end' and finally after
839 // reading, swap all sample frames so it reflects
840 // backward playback
841
842 unsigned long swapareastart = totalreadsamples;
843 unsigned long loopoffset = GetPos() - loop.LoopStart;
844 unsigned long samplestoreadinloop = Min(samplestoread, loopoffset);
845 unsigned long reverseplaybackend = GetPos() - samplestoreadinloop;
846
847 SetPos(reverseplaybackend);
848
849 // read samples for backward playback
850 do {
851 readsamples = Read(&pDst[totalreadsamples * this->FrameSize], samplestoreadinloop, pExternalDecompressionBuffer);
852 samplestoreadinloop -= readsamples;
853 samplestoread -= readsamples;
854 totalreadsamples += readsamples;
855 } while (samplestoreadinloop && readsamples);
856
857 SetPos(reverseplaybackend); // pretend we really read backwards
858
859 if (reverseplaybackend == loop.LoopStart) {
860 pPlaybackState->loop_cycles_left--;
861 pPlaybackState->reverse = false;
862 }
863
864 // reverse the sample frames for backward playback
865 SwapMemoryArea(&pDst[swapareastart * this->FrameSize], (totalreadsamples - swapareastart) * this->FrameSize, this->FrameSize);
866 }
867 } while (samplestoread && readsamples);
868 break;
869 }
870
871 case loop_type_backward: { // TODO: not tested yet!
872 // forward playback (not entered the loop yet)
873 if (!pPlaybackState->reverse) do {
874 samplestoloopend = loopEnd - GetPos();
875 readsamples = Read(&pDst[totalreadsamples * this->FrameSize], Min(samplestoread, samplestoloopend), pExternalDecompressionBuffer);
876 samplestoread -= readsamples;
877 totalreadsamples += readsamples;
878 if (readsamples == samplestoloopend) {
879 pPlaybackState->reverse = true;
880 break;
881 }
882 } while (samplestoread && readsamples);
883
884 if (!samplestoread) break;
885
886 // as we can only read forward from disk, we have to
887 // determine the end position within the loop first,
888 // read forward from that 'end' and finally after
889 // reading, swap all sample frames so it reflects
890 // backward playback
891
892 unsigned long swapareastart = totalreadsamples;
893 unsigned long loopoffset = GetPos() - loop.LoopStart;
894 unsigned long samplestoreadinloop = (this->LoopPlayCount) ? Min(samplestoread, pPlaybackState->loop_cycles_left * loop.LoopLength - loopoffset)
895 : samplestoread;
896 unsigned long reverseplaybackend = loop.LoopStart + Abs((loopoffset - samplestoreadinloop) % loop.LoopLength);
897
898 SetPos(reverseplaybackend);
899
900 // read samples for backward playback
901 do {
902 // if not endless loop check if max. number of loop cycles have been passed
903 if (this->LoopPlayCount && !pPlaybackState->loop_cycles_left) break;
904 samplestoloopend = loopEnd - GetPos();
905 readsamples = Read(&pDst[totalreadsamples * this->FrameSize], Min(samplestoreadinloop, samplestoloopend), pExternalDecompressionBuffer);
906 samplestoreadinloop -= readsamples;
907 samplestoread -= readsamples;
908 totalreadsamples += readsamples;
909 if (readsamples == samplestoloopend) {
910 pPlaybackState->loop_cycles_left--;
911 SetPos(loop.LoopStart);
912 }
913 } while (samplestoreadinloop && readsamples);
914
915 SetPos(reverseplaybackend); // pretend we really read backwards
916
917 // reverse the sample frames for backward playback
918 SwapMemoryArea(&pDst[swapareastart * this->FrameSize], (totalreadsamples - swapareastart) * this->FrameSize, this->FrameSize);
919 break;
920 }
921
922 default: case loop_type_normal: {
923 do {
924 // if not endless loop check if max. number of loop cycles have been passed
925 if (this->LoopPlayCount && !pPlaybackState->loop_cycles_left) break;
926 samplestoloopend = loopEnd - GetPos();
927 readsamples = Read(&pDst[totalreadsamples * this->FrameSize], Min(samplestoread, samplestoloopend), pExternalDecompressionBuffer);
928 samplestoread -= readsamples;
929 totalreadsamples += readsamples;
930 if (readsamples == samplestoloopend) {
931 pPlaybackState->loop_cycles_left--;
932 SetPos(loop.LoopStart);
933 }
934 } while (samplestoread && readsamples);
935 break;
936 }
937 }
938 }
939 }
940
941 // read on without looping
942 if (samplestoread) do {
943 readsamples = Read(&pDst[totalreadsamples * this->FrameSize], samplestoread, pExternalDecompressionBuffer);
944 samplestoread -= readsamples;
945 totalreadsamples += readsamples;
946 } while (readsamples && samplestoread);
947
948 // store current position
949 pPlaybackState->position = GetPos();
950
951 return totalreadsamples;
952 }
953
954 /**
955 * Reads \a SampleCount number of sample points from the current
956 * position into the buffer pointed by \a pBuffer and increments the
957 * position within the sample. The sample wave stream will be
958 * decompressed on the fly if using a compressed sample. Use this method
959 * and <i>SetPos()</i> if you don't want to load the sample into RAM,
960 * thus for disk streaming.
961 *
962 * <b>Caution:</b> If you are using more than one streaming thread, you
963 * have to use an external decompression buffer for <b>EACH</b>
964 * streaming thread to avoid race conditions and crashes!
965 *
966 * For 16 bit samples, the data in the buffer will be int16_t
967 * (using native endianness). For 24 bit, the buffer will
968 * contain three bytes per sample, little-endian.
969 *
970 * @param pBuffer destination buffer
971 * @param SampleCount number of sample points to read
972 * @param pExternalDecompressionBuffer (optional) external buffer to use for decompression
973 * @returns number of successfully read sample points
974 * @see SetPos(), CreateDecompressionBuffer()
975 */
976 unsigned long Sample::Read(void* pBuffer, unsigned long SampleCount, buffer_t* pExternalDecompressionBuffer) {
977 if (SampleCount == 0) return 0;
978 if (!Compressed) {
979 if (BitDepth == 24) {
980 return pCkData->Read(pBuffer, SampleCount * FrameSize, 1) / FrameSize;
981 }
982 else { // 16 bit
983 // (pCkData->Read does endian correction)
984 return Channels == 2 ? pCkData->Read(pBuffer, SampleCount << 1, 2) >> 1
985 : pCkData->Read(pBuffer, SampleCount, 2);
986 }
987 }
988 else {
989 if (this->SamplePos >= this->SamplesTotal) return 0;
990 //TODO: efficiency: maybe we should test for an average compression rate
991 unsigned long assumedsize = GuessSize(SampleCount),
992 remainingbytes = 0, // remaining bytes in the local buffer
993 remainingsamples = SampleCount,
994 copysamples, skipsamples,
995 currentframeoffset = this->FrameOffset; // offset in current sample frame since last Read()
996 this->FrameOffset = 0;
997
998 buffer_t* pDecompressionBuffer = (pExternalDecompressionBuffer) ? pExternalDecompressionBuffer : &InternalDecompressionBuffer;
999
1000 // if decompression buffer too small, then reduce amount of samples to read
1001 if (pDecompressionBuffer->Size < assumedsize) {
1002 std::cerr << "gig::Read(): WARNING - decompression buffer size too small!" << std::endl;
1003 SampleCount = WorstCaseMaxSamples(pDecompressionBuffer);
1004 remainingsamples = SampleCount;
1005 assumedsize = GuessSize(SampleCount);
1006 }
1007
1008 unsigned char* pSrc = (unsigned char*) pDecompressionBuffer->pStart;
1009 int16_t* pDst = static_cast<int16_t*>(pBuffer);
1010 uint8_t* pDst24 = static_cast<uint8_t*>(pBuffer);
1011 remainingbytes = pCkData->Read(pSrc, assumedsize, 1);
1012
1013 while (remainingsamples && remainingbytes) {
1014 unsigned long framesamples = SamplesPerFrame;
1015 unsigned long framebytes, rightChannelOffset = 0, nextFrameOffset;
1016
1017 int mode_l = *pSrc++, mode_r = 0;
1018
1019 if (Channels == 2) {
1020 mode_r = *pSrc++;
1021 framebytes = bytesPerFrame[mode_l] + bytesPerFrame[mode_r] + 2;
1022 rightChannelOffset = bytesPerFrameNoHdr[mode_l];
1023 nextFrameOffset = rightChannelOffset + bytesPerFrameNoHdr[mode_r];
1024 if (remainingbytes < framebytes) { // last frame in sample
1025 framesamples = SamplesInLastFrame;
1026 if (mode_l == 4 && (framesamples & 1)) {
1027 rightChannelOffset = ((framesamples + 1) * bitsPerSample[mode_l]) >> 3;
1028 }
1029 else {
1030 rightChannelOffset = (framesamples * bitsPerSample[mode_l]) >> 3;
1031 }
1032 }
1033 }
1034 else {
1035 framebytes = bytesPerFrame[mode_l] + 1;
1036 nextFrameOffset = bytesPerFrameNoHdr[mode_l];
1037 if (remainingbytes < framebytes) {
1038 framesamples = SamplesInLastFrame;
1039 }
1040 }
1041
1042 // determine how many samples in this frame to skip and read
1043 if (currentframeoffset + remainingsamples >= framesamples) {
1044 if (currentframeoffset <= framesamples) {
1045 copysamples = framesamples - currentframeoffset;
1046 skipsamples = currentframeoffset;
1047 }
1048 else {
1049 copysamples = 0;
1050 skipsamples = framesamples;
1051 }
1052 }
1053 else {
1054 // This frame has enough data for pBuffer, but not
1055 // all of the frame is needed. Set file position
1056 // to start of this frame for next call to Read.
1057 copysamples = remainingsamples;
1058 skipsamples = currentframeoffset;
1059 pCkData->SetPos(remainingbytes, RIFF::stream_backward);
1060 this->FrameOffset = currentframeoffset + copysamples;
1061 }
1062 remainingsamples -= copysamples;
1063
1064 if (remainingbytes > framebytes) {
1065 remainingbytes -= framebytes;
1066 if (remainingsamples == 0 &&
1067 currentframeoffset + copysamples == framesamples) {
1068 // This frame has enough data for pBuffer, and
1069 // all of the frame is needed. Set file
1070 // position to start of next frame for next
1071 // call to Read. FrameOffset is 0.
1072 pCkData->SetPos(remainingbytes, RIFF::stream_backward);
1073 }
1074 }
1075 else remainingbytes = 0;
1076
1077 currentframeoffset -= skipsamples;
1078
1079 if (copysamples == 0) {
1080 // skip this frame
1081 pSrc += framebytes - Channels;
1082 }
1083 else {
1084 const unsigned char* const param_l = pSrc;
1085 if (BitDepth == 24) {
1086 if (mode_l != 2) pSrc += 12;
1087
1088 if (Channels == 2) { // Stereo
1089 const unsigned char* const param_r = pSrc;
1090 if (mode_r != 2) pSrc += 12;
1091
1092 Decompress24(mode_l, param_l, 6, pSrc, pDst24,
1093 skipsamples, copysamples, TruncatedBits);
1094 Decompress24(mode_r, param_r, 6, pSrc + rightChannelOffset, pDst24 + 3,
1095 skipsamples, copysamples, TruncatedBits);
1096 pDst24 += copysamples * 6;
1097 }
1098 else { // Mono
1099 Decompress24(mode_l, param_l, 3, pSrc, pDst24,
1100 skipsamples, copysamples, TruncatedBits);
1101 pDst24 += copysamples * 3;
1102 }
1103 }
1104 else { // 16 bit
1105 if (mode_l) pSrc += 4;
1106
1107 int step;
1108 if (Channels == 2) { // Stereo
1109 const unsigned char* const param_r = pSrc;
1110 if (mode_r) pSrc += 4;
1111
1112 step = (2 - mode_l) + (2 - mode_r);
1113 Decompress16(mode_l, param_l, step, 2, pSrc, pDst, skipsamples, copysamples);
1114 Decompress16(mode_r, param_r, step, 2, pSrc + (2 - mode_l), pDst + 1,
1115 skipsamples, copysamples);
1116 pDst += copysamples << 1;
1117 }
1118 else { // Mono
1119 step = 2 - mode_l;
1120 Decompress16(mode_l, param_l, step, 1, pSrc, pDst, skipsamples, copysamples);
1121 pDst += copysamples;
1122 }
1123 }
1124 pSrc += nextFrameOffset;
1125 }
1126
1127 // reload from disk to local buffer if needed
1128 if (remainingsamples && remainingbytes < WorstCaseFrameSize && pCkData->GetState() == RIFF::stream_ready) {
1129 assumedsize = GuessSize(remainingsamples);
1130 pCkData->SetPos(remainingbytes, RIFF::stream_backward);
1131 if (pCkData->RemainingBytes() < assumedsize) assumedsize = pCkData->RemainingBytes();
1132 remainingbytes = pCkData->Read(pDecompressionBuffer->pStart, assumedsize, 1);
1133 pSrc = (unsigned char*) pDecompressionBuffer->pStart;
1134 }
1135 } // while
1136
1137 this->SamplePos += (SampleCount - remainingsamples);
1138 if (this->SamplePos > this->SamplesTotal) this->SamplePos = this->SamplesTotal;
1139 return (SampleCount - remainingsamples);
1140 }
1141 }
1142
1143 /** @brief Write sample wave data.
1144 *
1145 * Writes \a SampleCount number of sample points from the buffer pointed
1146 * by \a pBuffer and increments the position within the sample. Use this
1147 * method to directly write the sample data to disk, i.e. if you don't
1148 * want or cannot load the whole sample data into RAM.
1149 *
1150 * You have to Resize() the sample to the desired size and call
1151 * File::Save() <b>before</b> using Write().
1152 *
1153 * Note: there is currently no support for writing compressed samples.
1154 *
1155 * @param pBuffer - source buffer
1156 * @param SampleCount - number of sample points to write
1157 * @throws DLS::Exception if current sample size is too small
1158 * @throws gig::Exception if sample is compressed
1159 * @see DLS::LoadSampleData()
1160 */
1161 unsigned long Sample::Write(void* pBuffer, unsigned long SampleCount) {
1162 if (Compressed) throw gig::Exception("There is no support for writing compressed gig samples (yet)");
1163 if (pCkData->GetPos() == 0) {
1164 crc.reset();
1165 }
1166 unsigned long res = DLS::Sample::Write(pBuffer, SampleCount);
1167 crc.update((unsigned char *)pBuffer, SampleCount * FrameSize);
1168
1169 if (pCkData->GetPos() == pCkData->GetSize()) {
1170 File* pFile = static_cast<File*>(GetParent());
1171 pFile->SetSampleChecksum(this, crc.getValue());
1172 }
1173 return res;
1174 }
1175
1176 /**
1177 * Allocates a decompression buffer for streaming (compressed) samples
1178 * with Sample::Read(). If you are using more than one streaming thread
1179 * in your application you <b>HAVE</b> to create a decompression buffer
1180 * for <b>EACH</b> of your streaming threads and provide it with the
1181 * Sample::Read() call in order to avoid race conditions and crashes.
1182 *
1183 * You should free the memory occupied by the allocated buffer(s) once
1184 * you don't need one of your streaming threads anymore by calling
1185 * DestroyDecompressionBuffer().
1186 *
1187 * @param MaxReadSize - the maximum size (in sample points) you ever
1188 * expect to read with one Read() call
1189 * @returns allocated decompression buffer
1190 * @see DestroyDecompressionBuffer()
1191 */
1192 buffer_t Sample::CreateDecompressionBuffer(unsigned long MaxReadSize) {
1193 buffer_t result;
1194 const double worstCaseHeaderOverhead =
1195 (256.0 /*frame size*/ + 12.0 /*header*/ + 2.0 /*compression type flag (stereo)*/) / 256.0;
1196 result.Size = (unsigned long) (double(MaxReadSize) * 3.0 /*(24 Bit)*/ * 2.0 /*stereo*/ * worstCaseHeaderOverhead);
1197 result.pStart = new int8_t[result.Size];
1198 result.NullExtensionSize = 0;
1199 return result;
1200 }
1201
1202 /**
1203 * Free decompression buffer, previously created with
1204 * CreateDecompressionBuffer().
1205 *
1206 * @param DecompressionBuffer - previously allocated decompression
1207 * buffer to free
1208 */
1209 void Sample::DestroyDecompressionBuffer(buffer_t& DecompressionBuffer) {
1210 if (DecompressionBuffer.Size && DecompressionBuffer.pStart) {
1211 delete[] (int8_t*) DecompressionBuffer.pStart;
1212 DecompressionBuffer.pStart = NULL;
1213 DecompressionBuffer.Size = 0;
1214 DecompressionBuffer.NullExtensionSize = 0;
1215 }
1216 }
1217
1218 /**
1219 * Returns pointer to the Group this Sample belongs to. In the .gig
1220 * format a sample always belongs to one group. If it wasn't explicitly
1221 * assigned to a certain group, it will be automatically assigned to a
1222 * default group.
1223 *
1224 * @returns Sample's Group (never NULL)
1225 */
1226 Group* Sample::GetGroup() const {
1227 return pGroup;
1228 }
1229
1230 Sample::~Sample() {
1231 Instances--;
1232 if (!Instances && InternalDecompressionBuffer.Size) {
1233 delete[] (unsigned char*) InternalDecompressionBuffer.pStart;
1234 InternalDecompressionBuffer.pStart = NULL;
1235 InternalDecompressionBuffer.Size = 0;
1236 }
1237 if (FrameTable) delete[] FrameTable;
1238 if (RAMCache.pStart) delete[] (int8_t*) RAMCache.pStart;
1239 }
1240
1241
1242
1243 // *************** DimensionRegion ***************
1244 // *
1245
1246 uint DimensionRegion::Instances = 0;
1247 DimensionRegion::VelocityTableMap* DimensionRegion::pVelocityTables = NULL;
1248
1249 DimensionRegion::DimensionRegion(RIFF::List* _3ewl) : DLS::Sampler(_3ewl) {
1250 Instances++;
1251
1252 pSample = NULL;
1253
1254 memcpy(&Crossfade, &SamplerOptions, 4);
1255 if (!pVelocityTables) pVelocityTables = new VelocityTableMap;
1256
1257 RIFF::Chunk* _3ewa = _3ewl->GetSubChunk(CHUNK_ID_3EWA);
1258 if (_3ewa) { // if '3ewa' chunk exists
1259 _3ewa->ReadInt32(); // unknown, always == chunk size ?
1260 LFO3Frequency = (double) GIG_EXP_DECODE(_3ewa->ReadInt32());
1261 EG3Attack = (double) GIG_EXP_DECODE(_3ewa->ReadInt32());
1262 _3ewa->ReadInt16(); // unknown
1263 LFO1InternalDepth = _3ewa->ReadUint16();
1264 _3ewa->ReadInt16(); // unknown
1265 LFO3InternalDepth = _3ewa->ReadInt16();
1266 _3ewa->ReadInt16(); // unknown
1267 LFO1ControlDepth = _3ewa->ReadUint16();
1268 _3ewa->ReadInt16(); // unknown
1269 LFO3ControlDepth = _3ewa->ReadInt16();
1270 EG1Attack = (double) GIG_EXP_DECODE(_3ewa->ReadInt32());
1271 EG1Decay1 = (double) GIG_EXP_DECODE(_3ewa->ReadInt32());
1272 _3ewa->ReadInt16(); // unknown
1273 EG1Sustain = _3ewa->ReadUint16();
1274 EG1Release = (double) GIG_EXP_DECODE(_3ewa->ReadInt32());
1275 EG1Controller = DecodeLeverageController(static_cast<_lev_ctrl_t>(_3ewa->ReadUint8()));
1276 uint8_t eg1ctrloptions = _3ewa->ReadUint8();
1277 EG1ControllerInvert = eg1ctrloptions & 0x01;
1278 EG1ControllerAttackInfluence = GIG_EG_CTR_ATTACK_INFLUENCE_EXTRACT(eg1ctrloptions);
1279 EG1ControllerDecayInfluence = GIG_EG_CTR_DECAY_INFLUENCE_EXTRACT(eg1ctrloptions);
1280 EG1ControllerReleaseInfluence = GIG_EG_CTR_RELEASE_INFLUENCE_EXTRACT(eg1ctrloptions);
1281 EG2Controller = DecodeLeverageController(static_cast<_lev_ctrl_t>(_3ewa->ReadUint8()));
1282 uint8_t eg2ctrloptions = _3ewa->ReadUint8();
1283 EG2ControllerInvert = eg2ctrloptions & 0x01;
1284 EG2ControllerAttackInfluence = GIG_EG_CTR_ATTACK_INFLUENCE_EXTRACT(eg2ctrloptions);
1285 EG2ControllerDecayInfluence = GIG_EG_CTR_DECAY_INFLUENCE_EXTRACT(eg2ctrloptions);
1286 EG2ControllerReleaseInfluence = GIG_EG_CTR_RELEASE_INFLUENCE_EXTRACT(eg2ctrloptions);
1287 LFO1Frequency = (double) GIG_EXP_DECODE(_3ewa->ReadInt32());
1288 EG2Attack = (double) GIG_EXP_DECODE(_3ewa->ReadInt32());
1289 EG2Decay1 = (double) GIG_EXP_DECODE(_3ewa->ReadInt32());
1290 _3ewa->ReadInt16(); // unknown
1291 EG2Sustain = _3ewa->ReadUint16();
1292 EG2Release = (double) GIG_EXP_DECODE(_3ewa->ReadInt32());
1293 _3ewa->ReadInt16(); // unknown
1294 LFO2ControlDepth = _3ewa->ReadUint16();
1295 LFO2Frequency = (double) GIG_EXP_DECODE(_3ewa->ReadInt32());
1296 _3ewa->ReadInt16(); // unknown
1297 LFO2InternalDepth = _3ewa->ReadUint16();
1298 int32_t eg1decay2 = _3ewa->ReadInt32();
1299 EG1Decay2 = (double) GIG_EXP_DECODE(eg1decay2);
1300 EG1InfiniteSustain = (eg1decay2 == 0x7fffffff);
1301 _3ewa->ReadInt16(); // unknown
1302 EG1PreAttack = _3ewa->ReadUint16();
1303 int32_t eg2decay2 = _3ewa->ReadInt32();
1304 EG2Decay2 = (double) GIG_EXP_DECODE(eg2decay2);
1305 EG2InfiniteSustain = (eg2decay2 == 0x7fffffff);
1306 _3ewa->ReadInt16(); // unknown
1307 EG2PreAttack = _3ewa->ReadUint16();
1308 uint8_t velocityresponse = _3ewa->ReadUint8();
1309 if (velocityresponse < 5) {
1310 VelocityResponseCurve = curve_type_nonlinear;
1311 VelocityResponseDepth = velocityresponse;
1312 } else if (velocityresponse < 10) {
1313 VelocityResponseCurve = curve_type_linear;
1314 VelocityResponseDepth = velocityresponse - 5;
1315 } else if (velocityresponse < 15) {
1316 VelocityResponseCurve = curve_type_special;
1317 VelocityResponseDepth = velocityresponse - 10;
1318 } else {
1319 VelocityResponseCurve = curve_type_unknown;
1320 VelocityResponseDepth = 0;
1321 }
1322 uint8_t releasevelocityresponse = _3ewa->ReadUint8();
1323 if (releasevelocityresponse < 5) {
1324 ReleaseVelocityResponseCurve = curve_type_nonlinear;
1325 ReleaseVelocityResponseDepth = releasevelocityresponse;
1326 } else if (releasevelocityresponse < 10) {
1327 ReleaseVelocityResponseCurve = curve_type_linear;
1328 ReleaseVelocityResponseDepth = releasevelocityresponse - 5;
1329 } else if (releasevelocityresponse < 15) {
1330 ReleaseVelocityResponseCurve = curve_type_special;
1331 ReleaseVelocityResponseDepth = releasevelocityresponse - 10;
1332 } else {
1333 ReleaseVelocityResponseCurve = curve_type_unknown;
1334 ReleaseVelocityResponseDepth = 0;
1335 }
1336 VelocityResponseCurveScaling = _3ewa->ReadUint8();
1337 AttenuationControllerThreshold = _3ewa->ReadInt8();
1338 _3ewa->ReadInt32(); // unknown
1339 SampleStartOffset = (uint16_t) _3ewa->ReadInt16();
1340 _3ewa->ReadInt16(); // unknown
1341 uint8_t pitchTrackDimensionBypass = _3ewa->ReadInt8();
1342 PitchTrack = GIG_PITCH_TRACK_EXTRACT(pitchTrackDimensionBypass);
1343 if (pitchTrackDimensionBypass & 0x10) DimensionBypass = dim_bypass_ctrl_94;
1344 else if (pitchTrackDimensionBypass & 0x20) DimensionBypass = dim_bypass_ctrl_95;
1345 else DimensionBypass = dim_bypass_ctrl_none;
1346 uint8_t pan = _3ewa->ReadUint8();
1347 Pan = (pan < 64) ? pan : -((int)pan - 63); // signed 7 bit -> signed 8 bit
1348 SelfMask = _3ewa->ReadInt8() & 0x01;
1349 _3ewa->ReadInt8(); // unknown
1350 uint8_t lfo3ctrl = _3ewa->ReadUint8();
1351 LFO3Controller = static_cast<lfo3_ctrl_t>(lfo3ctrl & 0x07); // lower 3 bits
1352 LFO3Sync = lfo3ctrl & 0x20; // bit 5
1353 InvertAttenuationController = lfo3ctrl & 0x80; // bit 7
1354 AttenuationController = DecodeLeverageController(static_cast<_lev_ctrl_t>(_3ewa->ReadUint8()));
1355 uint8_t lfo2ctrl = _3ewa->ReadUint8();
1356 LFO2Controller = static_cast<lfo2_ctrl_t>(lfo2ctrl & 0x07); // lower 3 bits
1357 LFO2FlipPhase = lfo2ctrl & 0x80; // bit 7
1358 LFO2Sync = lfo2ctrl & 0x20; // bit 5
1359 bool extResonanceCtrl = lfo2ctrl & 0x40; // bit 6
1360 uint8_t lfo1ctrl = _3ewa->ReadUint8();
1361 LFO1Controller = static_cast<lfo1_ctrl_t>(lfo1ctrl & 0x07); // lower 3 bits
1362 LFO1FlipPhase = lfo1ctrl & 0x80; // bit 7
1363 LFO1Sync = lfo1ctrl & 0x40; // bit 6
1364 VCFResonanceController = (extResonanceCtrl) ? static_cast<vcf_res_ctrl_t>(GIG_VCF_RESONANCE_CTRL_EXTRACT(lfo1ctrl))
1365 : vcf_res_ctrl_none;
1366 uint16_t eg3depth = _3ewa->ReadUint16();
1367 EG3Depth = (eg3depth <= 1200) ? eg3depth /* positives */
1368 : (-1) * (int16_t) ((eg3depth ^ 0xffff) + 1); /* binary complementary for negatives */
1369 _3ewa->ReadInt16(); // unknown
1370 ChannelOffset = _3ewa->ReadUint8() / 4;
1371 uint8_t regoptions = _3ewa->ReadUint8();
1372 MSDecode = regoptions & 0x01; // bit 0
1373 SustainDefeat = regoptions & 0x02; // bit 1
1374 _3ewa->ReadInt16(); // unknown
1375 VelocityUpperLimit = _3ewa->ReadInt8();
1376 _3ewa->ReadInt8(); // unknown
1377 _3ewa->ReadInt16(); // unknown
1378 ReleaseTriggerDecay = _3ewa->ReadUint8(); // release trigger decay
1379 _3ewa->ReadInt8(); // unknown
1380 _3ewa->ReadInt8(); // unknown
1381 EG1Hold = _3ewa->ReadUint8() & 0x80; // bit 7
1382 uint8_t vcfcutoff = _3ewa->ReadUint8();
1383 VCFEnabled = vcfcutoff & 0x80; // bit 7
1384 VCFCutoff = vcfcutoff & 0x7f; // lower 7 bits
1385 VCFCutoffController = static_cast<vcf_cutoff_ctrl_t>(_3ewa->ReadUint8());
1386 uint8_t vcfvelscale = _3ewa->ReadUint8();
1387 VCFCutoffControllerInvert = vcfvelscale & 0x80; // bit 7
1388 VCFVelocityScale = vcfvelscale & 0x7f; // lower 7 bits
1389 _3ewa->ReadInt8(); // unknown
1390 uint8_t vcfresonance = _3ewa->ReadUint8();
1391 VCFResonance = vcfresonance & 0x7f; // lower 7 bits
1392 VCFResonanceDynamic = !(vcfresonance & 0x80); // bit 7
1393 uint8_t vcfbreakpoint = _3ewa->ReadUint8();
1394 VCFKeyboardTracking = vcfbreakpoint & 0x80; // bit 7
1395 VCFKeyboardTrackingBreakpoint = vcfbreakpoint & 0x7f; // lower 7 bits
1396 uint8_t vcfvelocity = _3ewa->ReadUint8();
1397 VCFVelocityDynamicRange = vcfvelocity % 5;
1398 VCFVelocityCurve = static_cast<curve_type_t>(vcfvelocity / 5);
1399 VCFType = static_cast<vcf_type_t>(_3ewa->ReadUint8());
1400 if (VCFType == vcf_type_lowpass) {
1401 if (lfo3ctrl & 0x40) // bit 6
1402 VCFType = vcf_type_lowpassturbo;
1403 }
1404 if (_3ewa->RemainingBytes() >= 8) {
1405 _3ewa->Read(DimensionUpperLimits, 1, 8);
1406 } else {
1407 memset(DimensionUpperLimits, 0, 8);
1408 }
1409 } else { // '3ewa' chunk does not exist yet
1410 // use default values
1411 LFO3Frequency = 1.0;
1412 EG3Attack = 0.0;
1413 LFO1InternalDepth = 0;
1414 LFO3InternalDepth = 0;
1415 LFO1ControlDepth = 0;
1416 LFO3ControlDepth = 0;
1417 EG1Attack = 0.0;
1418 EG1Decay1 = 0.0;
1419 EG1Sustain = 0;
1420 EG1Release = 0.0;
1421 EG1Controller.type = eg1_ctrl_t::type_none;
1422 EG1Controller.controller_number = 0;
1423 EG1ControllerInvert = false;
1424 EG1ControllerAttackInfluence = 0;
1425 EG1ControllerDecayInfluence = 0;
1426 EG1ControllerReleaseInfluence = 0;
1427 EG2Controller.type = eg2_ctrl_t::type_none;
1428 EG2Controller.controller_number = 0;
1429 EG2ControllerInvert = false;
1430 EG2ControllerAttackInfluence = 0;
1431 EG2ControllerDecayInfluence = 0;
1432 EG2ControllerReleaseInfluence = 0;
1433 LFO1Frequency = 1.0;
1434 EG2Attack = 0.0;
1435 EG2Decay1 = 0.0;
1436 EG2Sustain = 0;
1437 EG2Release = 0.0;
1438 LFO2ControlDepth = 0;
1439 LFO2Frequency = 1.0;
1440 LFO2InternalDepth = 0;
1441 EG1Decay2 = 0.0;
1442 EG1InfiniteSustain = false;
1443 EG1PreAttack = 1000;
1444 EG2Decay2 = 0.0;
1445 EG2InfiniteSustain = false;
1446 EG2PreAttack = 1000;
1447 VelocityResponseCurve = curve_type_nonlinear;
1448 VelocityResponseDepth = 3;
1449 ReleaseVelocityResponseCurve = curve_type_nonlinear;
1450 ReleaseVelocityResponseDepth = 3;
1451 VelocityResponseCurveScaling = 32;
1452 AttenuationControllerThreshold = 0;
1453 SampleStartOffset = 0;
1454 PitchTrack = true;
1455 DimensionBypass = dim_bypass_ctrl_none;
1456 Pan = 0;
1457 SelfMask = true;
1458 LFO3Controller = lfo3_ctrl_modwheel;
1459 LFO3Sync = false;
1460 InvertAttenuationController = false;
1461 AttenuationController.type = attenuation_ctrl_t::type_none;
1462 AttenuationController.controller_number = 0;
1463 LFO2Controller = lfo2_ctrl_internal;
1464 LFO2FlipPhase = false;
1465 LFO2Sync = false;
1466 LFO1Controller = lfo1_ctrl_internal;
1467 LFO1FlipPhase = false;
1468 LFO1Sync = false;
1469 VCFResonanceController = vcf_res_ctrl_none;
1470 EG3Depth = 0;
1471 ChannelOffset = 0;
1472 MSDecode = false;
1473 SustainDefeat = false;
1474 VelocityUpperLimit = 0;
1475 ReleaseTriggerDecay = 0;
1476 EG1Hold = false;
1477 VCFEnabled = false;
1478 VCFCutoff = 0;
1479 VCFCutoffController = vcf_cutoff_ctrl_none;
1480 VCFCutoffControllerInvert = false;
1481 VCFVelocityScale = 0;
1482 VCFResonance = 0;
1483 VCFResonanceDynamic = false;
1484 VCFKeyboardTracking = false;
1485 VCFKeyboardTrackingBreakpoint = 0;
1486 VCFVelocityDynamicRange = 0x04;
1487 VCFVelocityCurve = curve_type_linear;
1488 VCFType = vcf_type_lowpass;
1489 memset(DimensionUpperLimits, 0, 8);
1490 }
1491
1492 pVelocityAttenuationTable = GetVelocityTable(VelocityResponseCurve,
1493 VelocityResponseDepth,
1494 VelocityResponseCurveScaling);
1495
1496 curve_type_t curveType = ReleaseVelocityResponseCurve;
1497 uint8_t depth = ReleaseVelocityResponseDepth;
1498
1499 // this models a strange behaviour or bug in GSt: two of the
1500 // velocity response curves for release time are not used even
1501 // if specified, instead another curve is chosen.
1502 if ((curveType == curve_type_nonlinear && depth == 0) ||
1503 (curveType == curve_type_special && depth == 4)) {
1504 curveType = curve_type_nonlinear;
1505 depth = 3;
1506 }
1507 pVelocityReleaseTable = GetVelocityTable(curveType, depth, 0);
1508
1509 curveType = VCFVelocityCurve;
1510 depth = VCFVelocityDynamicRange;
1511
1512 // even stranger GSt: two of the velocity response curves for
1513 // filter cutoff are not used, instead another special curve
1514 // is chosen. This curve is not used anywhere else.
1515 if ((curveType == curve_type_nonlinear && depth == 0) ||
1516 (curveType == curve_type_special && depth == 4)) {
1517 curveType = curve_type_special;
1518 depth = 5;
1519 }
1520 pVelocityCutoffTable = GetVelocityTable(curveType, depth,
1521 VCFCutoffController <= vcf_cutoff_ctrl_none2 ? VCFVelocityScale : 0);
1522
1523 SampleAttenuation = pow(10.0, -Gain / (20.0 * 655360));
1524 VelocityTable = 0;
1525 }
1526
1527 /**
1528 * Apply dimension region settings to the respective RIFF chunks. You
1529 * have to call File::Save() to make changes persistent.
1530 *
1531 * Usually there is absolutely no need to call this method explicitly.
1532 * It will be called automatically when File::Save() was called.
1533 */
1534 void DimensionRegion::UpdateChunks() {
1535 // first update base class's chunk
1536 DLS::Sampler::UpdateChunks();
1537
1538 // make sure '3ewa' chunk exists
1539 RIFF::Chunk* _3ewa = pParentList->GetSubChunk(CHUNK_ID_3EWA);
1540 if (!_3ewa) _3ewa = pParentList->AddSubChunk(CHUNK_ID_3EWA, 140);
1541 uint8_t* pData = (uint8_t*) _3ewa->LoadChunkData();
1542
1543 // update '3ewa' chunk with DimensionRegion's current settings
1544
1545 const uint32_t chunksize = _3ewa->GetNewSize();
1546 store32(&pData[0], chunksize); // unknown, always chunk size?
1547
1548 const int32_t lfo3freq = (int32_t) GIG_EXP_ENCODE(LFO3Frequency);
1549 store32(&pData[4], lfo3freq);
1550
1551 const int32_t eg3attack = (int32_t) GIG_EXP_ENCODE(EG3Attack);
1552 store32(&pData[8], eg3attack);
1553
1554 // next 2 bytes unknown
1555
1556 store16(&pData[14], LFO1InternalDepth);
1557
1558 // next 2 bytes unknown
1559
1560 store16(&pData[18], LFO3InternalDepth);
1561
1562 // next 2 bytes unknown
1563
1564 store16(&pData[22], LFO1ControlDepth);
1565
1566 // next 2 bytes unknown
1567
1568 store16(&pData[26], LFO3ControlDepth);
1569
1570 const int32_t eg1attack = (int32_t) GIG_EXP_ENCODE(EG1Attack);
1571 store32(&pData[28], eg1attack);
1572
1573 const int32_t eg1decay1 = (int32_t) GIG_EXP_ENCODE(EG1Decay1);
1574 store32(&pData[32], eg1decay1);
1575
1576 // next 2 bytes unknown
1577
1578 store16(&pData[38], EG1Sustain);
1579
1580 const int32_t eg1release = (int32_t) GIG_EXP_ENCODE(EG1Release);
1581 store32(&pData[40], eg1release);
1582
1583 const uint8_t eg1ctl = (uint8_t) EncodeLeverageController(EG1Controller);
1584 pData[44] = eg1ctl;
1585
1586 const uint8_t eg1ctrloptions =
1587 (EG1ControllerInvert) ? 0x01 : 0x00 |
1588 GIG_EG_CTR_ATTACK_INFLUENCE_ENCODE(EG1ControllerAttackInfluence) |
1589 GIG_EG_CTR_DECAY_INFLUENCE_ENCODE(EG1ControllerDecayInfluence) |
1590 GIG_EG_CTR_RELEASE_INFLUENCE_ENCODE(EG1ControllerReleaseInfluence);
1591 pData[45] = eg1ctrloptions;
1592
1593 const uint8_t eg2ctl = (uint8_t) EncodeLeverageController(EG2Controller);
1594 pData[46] = eg2ctl;
1595
1596 const uint8_t eg2ctrloptions =
1597 (EG2ControllerInvert) ? 0x01 : 0x00 |
1598 GIG_EG_CTR_ATTACK_INFLUENCE_ENCODE(EG2ControllerAttackInfluence) |
1599 GIG_EG_CTR_DECAY_INFLUENCE_ENCODE(EG2ControllerDecayInfluence) |
1600 GIG_EG_CTR_RELEASE_INFLUENCE_ENCODE(EG2ControllerReleaseInfluence);
1601 pData[47] = eg2ctrloptions;
1602
1603 const int32_t lfo1freq = (int32_t) GIG_EXP_ENCODE(LFO1Frequency);
1604 store32(&pData[48], lfo1freq);
1605
1606 const int32_t eg2attack = (int32_t) GIG_EXP_ENCODE(EG2Attack);
1607 store32(&pData[52], eg2attack);
1608
1609 const int32_t eg2decay1 = (int32_t) GIG_EXP_ENCODE(EG2Decay1);
1610 store32(&pData[56], eg2decay1);
1611
1612 // next 2 bytes unknown
1613
1614 store16(&pData[62], EG2Sustain);
1615
1616 const int32_t eg2release = (int32_t) GIG_EXP_ENCODE(EG2Release);
1617 store32(&pData[64], eg2release);
1618
1619 // next 2 bytes unknown
1620
1621 store16(&pData[70], LFO2ControlDepth);
1622
1623 const int32_t lfo2freq = (int32_t) GIG_EXP_ENCODE(LFO2Frequency);
1624 store32(&pData[72], lfo2freq);
1625
1626 // next 2 bytes unknown
1627
1628 store16(&pData[78], LFO2InternalDepth);
1629
1630 const int32_t eg1decay2 = (int32_t) (EG1InfiniteSustain) ? 0x7fffffff : (int32_t) GIG_EXP_ENCODE(EG1Decay2);
1631 store32(&pData[80], eg1decay2);
1632
1633 // next 2 bytes unknown
1634
1635 store16(&pData[86], EG1PreAttack);
1636
1637 const int32_t eg2decay2 = (int32_t) (EG2InfiniteSustain) ? 0x7fffffff : (int32_t) GIG_EXP_ENCODE(EG2Decay2);
1638 store32(&pData[88], eg2decay2);
1639
1640 // next 2 bytes unknown
1641
1642 store16(&pData[94], EG2PreAttack);
1643
1644 {
1645 if (VelocityResponseDepth > 4) throw Exception("VelocityResponseDepth must be between 0 and 4");
1646 uint8_t velocityresponse = VelocityResponseDepth;
1647 switch (VelocityResponseCurve) {
1648 case curve_type_nonlinear:
1649 break;
1650 case curve_type_linear:
1651 velocityresponse += 5;
1652 break;
1653 case curve_type_special:
1654 velocityresponse += 10;
1655 break;
1656 case curve_type_unknown:
1657 default:
1658 throw Exception("Could not update DimensionRegion's chunk, unknown VelocityResponseCurve selected");
1659 }
1660 pData[96] = velocityresponse;
1661 }
1662
1663 {
1664 if (ReleaseVelocityResponseDepth > 4) throw Exception("ReleaseVelocityResponseDepth must be between 0 and 4");
1665 uint8_t releasevelocityresponse = ReleaseVelocityResponseDepth;
1666 switch (ReleaseVelocityResponseCurve) {
1667 case curve_type_nonlinear:
1668 break;
1669 case curve_type_linear:
1670 releasevelocityresponse += 5;
1671 break;
1672 case curve_type_special:
1673 releasevelocityresponse += 10;
1674 break;
1675 case curve_type_unknown:
1676 default:
1677 throw Exception("Could not update DimensionRegion's chunk, unknown ReleaseVelocityResponseCurve selected");
1678 }
1679 pData[97] = releasevelocityresponse;
1680 }
1681
1682 pData[98] = VelocityResponseCurveScaling;
1683
1684 pData[99] = AttenuationControllerThreshold;
1685
1686 // next 4 bytes unknown
1687
1688 store16(&pData[104], SampleStartOffset);
1689
1690 // next 2 bytes unknown
1691
1692 {
1693 uint8_t pitchTrackDimensionBypass = GIG_PITCH_TRACK_ENCODE(PitchTrack);
1694 switch (DimensionBypass) {
1695 case dim_bypass_ctrl_94:
1696 pitchTrackDimensionBypass |= 0x10;
1697 break;
1698 case dim_bypass_ctrl_95:
1699 pitchTrackDimensionBypass |= 0x20;
1700 break;
1701 case dim_bypass_ctrl_none:
1702 //FIXME: should we set anything here?
1703 break;
1704 default:
1705 throw Exception("Could not update DimensionRegion's chunk, unknown DimensionBypass selected");
1706 }
1707 pData[108] = pitchTrackDimensionBypass;
1708 }
1709
1710 const uint8_t pan = (Pan >= 0) ? Pan : ((-Pan) + 63); // signed 8 bit -> signed 7 bit
1711 pData[109] = pan;
1712
1713 const uint8_t selfmask = (SelfMask) ? 0x01 : 0x00;
1714 pData[110] = selfmask;
1715
1716 // next byte unknown
1717
1718 {
1719 uint8_t lfo3ctrl = LFO3Controller & 0x07; // lower 3 bits
1720 if (LFO3Sync) lfo3ctrl |= 0x20; // bit 5
1721 if (InvertAttenuationController) lfo3ctrl |= 0x80; // bit 7
1722 if (VCFType == vcf_type_lowpassturbo) lfo3ctrl |= 0x40; // bit 6
1723 pData[112] = lfo3ctrl;
1724 }
1725
1726 const uint8_t attenctl = EncodeLeverageController(AttenuationController);
1727 pData[113] = attenctl;
1728
1729 {
1730 uint8_t lfo2ctrl = LFO2Controller & 0x07; // lower 3 bits
1731 if (LFO2FlipPhase) lfo2ctrl |= 0x80; // bit 7
1732 if (LFO2Sync) lfo2ctrl |= 0x20; // bit 5
1733 if (VCFResonanceController != vcf_res_ctrl_none) lfo2ctrl |= 0x40; // bit 6
1734 pData[114] = lfo2ctrl;
1735 }
1736
1737 {
1738 uint8_t lfo1ctrl = LFO1Controller & 0x07; // lower 3 bits
1739 if (LFO1FlipPhase) lfo1ctrl |= 0x80; // bit 7
1740 if (LFO1Sync) lfo1ctrl |= 0x40; // bit 6
1741 if (VCFResonanceController != vcf_res_ctrl_none)
1742 lfo1ctrl |= GIG_VCF_RESONANCE_CTRL_ENCODE(VCFResonanceController);
1743 pData[115] = lfo1ctrl;
1744 }
1745
1746 const uint16_t eg3depth = (EG3Depth >= 0) ? EG3Depth
1747 : uint16_t(((-EG3Depth) - 1) ^ 0xffff); /* binary complementary for negatives */
1748 pData[116] = eg3depth;
1749
1750 // next 2 bytes unknown
1751
1752 const uint8_t channeloffset = ChannelOffset * 4;
1753 pData[120] = channeloffset;
1754
1755 {
1756 uint8_t regoptions = 0;
1757 if (MSDecode) regoptions |= 0x01; // bit 0
1758 if (SustainDefeat) regoptions |= 0x02; // bit 1
1759 pData[121] = regoptions;
1760 }
1761
1762 // next 2 bytes unknown
1763
1764 pData[124] = VelocityUpperLimit;
1765
1766 // next 3 bytes unknown
1767
1768 pData[128] = ReleaseTriggerDecay;
1769
1770 // next 2 bytes unknown
1771
1772 const uint8_t eg1hold = (EG1Hold) ? 0x80 : 0x00; // bit 7
1773 pData[131] = eg1hold;
1774
1775 const uint8_t vcfcutoff = (VCFEnabled) ? 0x80 : 0x00 | /* bit 7 */
1776 (VCFCutoff & 0x7f); /* lower 7 bits */
1777 pData[132] = vcfcutoff;
1778
1779 pData[133] = VCFCutoffController;
1780
1781 const uint8_t vcfvelscale = (VCFCutoffControllerInvert) ? 0x80 : 0x00 | /* bit 7 */
1782 (VCFVelocityScale & 0x7f); /* lower 7 bits */
1783 pData[134] = vcfvelscale;
1784
1785 // next byte unknown
1786
1787 const uint8_t vcfresonance = (VCFResonanceDynamic) ? 0x00 : 0x80 | /* bit 7 */
1788 (VCFResonance & 0x7f); /* lower 7 bits */
1789 pData[136] = vcfresonance;
1790
1791 const uint8_t vcfbreakpoint = (VCFKeyboardTracking) ? 0x80 : 0x00 | /* bit 7 */
1792 (VCFKeyboardTrackingBreakpoint & 0x7f); /* lower 7 bits */
1793 pData[137] = vcfbreakpoint;
1794
1795 const uint8_t vcfvelocity = VCFVelocityDynamicRange % 5 |
1796 VCFVelocityCurve * 5;
1797 pData[138] = vcfvelocity;
1798
1799 const uint8_t vcftype = (VCFType == vcf_type_lowpassturbo) ? vcf_type_lowpass : VCFType;
1800 pData[139] = vcftype;
1801
1802 if (chunksize >= 148) {
1803 memcpy(&pData[140], DimensionUpperLimits, 8);
1804 }
1805 }
1806
1807 // get the corresponding velocity table from the table map or create & calculate that table if it doesn't exist yet
1808 double* DimensionRegion::GetVelocityTable(curve_type_t curveType, uint8_t depth, uint8_t scaling)
1809 {
1810 double* table;
1811 uint32_t tableKey = (curveType<<16) | (depth<<8) | scaling;
1812 if (pVelocityTables->count(tableKey)) { // if key exists
1813 table = (*pVelocityTables)[tableKey];
1814 }
1815 else {
1816 table = CreateVelocityTable(curveType, depth, scaling);
1817 (*pVelocityTables)[tableKey] = table; // put the new table into the tables map
1818 }
1819 return table;
1820 }
1821
1822 leverage_ctrl_t DimensionRegion::DecodeLeverageController(_lev_ctrl_t EncodedController) {
1823 leverage_ctrl_t decodedcontroller;
1824 switch (EncodedController) {
1825 // special controller
1826 case _lev_ctrl_none:
1827 decodedcontroller.type = leverage_ctrl_t::type_none;
1828 decodedcontroller.controller_number = 0;
1829 break;
1830 case _lev_ctrl_velocity:
1831 decodedcontroller.type = leverage_ctrl_t::type_velocity;
1832 decodedcontroller.controller_number = 0;
1833 break;
1834 case _lev_ctrl_channelaftertouch:
1835 decodedcontroller.type = leverage_ctrl_t::type_channelaftertouch;
1836 decodedcontroller.controller_number = 0;
1837 break;
1838
1839 // ordinary MIDI control change controller
1840 case _lev_ctrl_modwheel:
1841 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1842 decodedcontroller.controller_number = 1;
1843 break;
1844 case _lev_ctrl_breath:
1845 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1846 decodedcontroller.controller_number = 2;
1847 break;
1848 case _lev_ctrl_foot:
1849 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1850 decodedcontroller.controller_number = 4;
1851 break;
1852 case _lev_ctrl_effect1:
1853 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1854 decodedcontroller.controller_number = 12;
1855 break;
1856 case _lev_ctrl_effect2:
1857 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1858 decodedcontroller.controller_number = 13;
1859 break;
1860 case _lev_ctrl_genpurpose1:
1861 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1862 decodedcontroller.controller_number = 16;
1863 break;
1864 case _lev_ctrl_genpurpose2:
1865 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1866 decodedcontroller.controller_number = 17;
1867 break;
1868 case _lev_ctrl_genpurpose3:
1869 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1870 decodedcontroller.controller_number = 18;
1871 break;
1872 case _lev_ctrl_genpurpose4:
1873 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1874 decodedcontroller.controller_number = 19;
1875 break;
1876 case _lev_ctrl_portamentotime:
1877 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1878 decodedcontroller.controller_number = 5;
1879 break;
1880 case _lev_ctrl_sustainpedal:
1881 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1882 decodedcontroller.controller_number = 64;
1883 break;
1884 case _lev_ctrl_portamento:
1885 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1886 decodedcontroller.controller_number = 65;
1887 break;
1888 case _lev_ctrl_sostenutopedal:
1889 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1890 decodedcontroller.controller_number = 66;
1891 break;
1892 case _lev_ctrl_softpedal:
1893 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1894 decodedcontroller.controller_number = 67;
1895 break;
1896 case _lev_ctrl_genpurpose5:
1897 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1898 decodedcontroller.controller_number = 80;
1899 break;
1900 case _lev_ctrl_genpurpose6:
1901 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1902 decodedcontroller.controller_number = 81;
1903 break;
1904 case _lev_ctrl_genpurpose7:
1905 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1906 decodedcontroller.controller_number = 82;
1907 break;
1908 case _lev_ctrl_genpurpose8:
1909 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1910 decodedcontroller.controller_number = 83;
1911 break;
1912 case _lev_ctrl_effect1depth:
1913 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1914 decodedcontroller.controller_number = 91;
1915 break;
1916 case _lev_ctrl_effect2depth:
1917 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1918 decodedcontroller.controller_number = 92;
1919 break;
1920 case _lev_ctrl_effect3depth:
1921 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1922 decodedcontroller.controller_number = 93;
1923 break;
1924 case _lev_ctrl_effect4depth:
1925 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1926 decodedcontroller.controller_number = 94;
1927 break;
1928 case _lev_ctrl_effect5depth:
1929 decodedcontroller.type = leverage_ctrl_t::type_controlchange;
1930 decodedcontroller.controller_number = 95;
1931 break;
1932
1933 // unknown controller type
1934 default:
1935 throw gig::Exception("Unknown leverage controller type.");
1936 }
1937 return decodedcontroller;
1938 }
1939
1940 DimensionRegion::_lev_ctrl_t DimensionRegion::EncodeLeverageController(leverage_ctrl_t DecodedController) {
1941 _lev_ctrl_t encodedcontroller;
1942 switch (DecodedController.type) {
1943 // special controller
1944 case leverage_ctrl_t::type_none:
1945 encodedcontroller = _lev_ctrl_none;
1946 break;
1947 case leverage_ctrl_t::type_velocity:
1948 encodedcontroller = _lev_ctrl_velocity;
1949 break;
1950 case leverage_ctrl_t::type_channelaftertouch:
1951 encodedcontroller = _lev_ctrl_channelaftertouch;
1952 break;
1953
1954 // ordinary MIDI control change controller
1955 case leverage_ctrl_t::type_controlchange:
1956 switch (DecodedController.controller_number) {
1957 case 1:
1958 encodedcontroller = _lev_ctrl_modwheel;
1959 break;
1960 case 2:
1961 encodedcontroller = _lev_ctrl_breath;
1962 break;
1963 case 4:
1964 encodedcontroller = _lev_ctrl_foot;
1965 break;
1966 case 12:
1967 encodedcontroller = _lev_ctrl_effect1;
1968 break;
1969 case 13:
1970 encodedcontroller = _lev_ctrl_effect2;
1971 break;
1972 case 16:
1973 encodedcontroller = _lev_ctrl_genpurpose1;
1974 break;
1975 case 17:
1976 encodedcontroller = _lev_ctrl_genpurpose2;
1977 break;
1978 case 18:
1979 encodedcontroller = _lev_ctrl_genpurpose3;
1980 break;
1981 case 19:
1982 encodedcontroller = _lev_ctrl_genpurpose4;
1983 break;
1984 case 5:
1985 encodedcontroller = _lev_ctrl_portamentotime;
1986 break;
1987 case 64:
1988 encodedcontroller = _lev_ctrl_sustainpedal;
1989 break;
1990 case 65:
1991 encodedcontroller = _lev_ctrl_portamento;
1992 break;
1993 case 66:
1994 encodedcontroller = _lev_ctrl_sostenutopedal;
1995 break;
1996 case 67:
1997 encodedcontroller = _lev_ctrl_softpedal;
1998 break;
1999 case 80:
2000 encodedcontroller = _lev_ctrl_genpurpose5;
2001 break;
2002 case 81:
2003 encodedcontroller = _lev_ctrl_genpurpose6;
2004 break;
2005 case 82:
2006 encodedcontroller = _lev_ctrl_genpurpose7;
2007 break;
2008 case 83:
2009 encodedcontroller = _lev_ctrl_genpurpose8;
2010 break;
2011 case 91:
2012 encodedcontroller = _lev_ctrl_effect1depth;
2013 break;
2014 case 92:
2015 encodedcontroller = _lev_ctrl_effect2depth;
2016 break;
2017 case 93:
2018 encodedcontroller = _lev_ctrl_effect3depth;
2019 break;
2020 case 94:
2021 encodedcontroller = _lev_ctrl_effect4depth;
2022 break;
2023 case 95:
2024 encodedcontroller = _lev_ctrl_effect5depth;
2025 break;
2026 default:
2027 throw gig::Exception("leverage controller number is not supported by the gig format");
2028 }
2029 break;
2030 default:
2031 throw gig::Exception("Unknown leverage controller type.");
2032 }
2033 return encodedcontroller;
2034 }
2035
2036 DimensionRegion::~DimensionRegion() {
2037 Instances--;
2038 if (!Instances) {
2039 // delete the velocity->volume tables
2040 VelocityTableMap::iterator iter;
2041 for (iter = pVelocityTables->begin(); iter != pVelocityTables->end(); iter++) {
2042 double* pTable = iter->second;
2043 if (pTable) delete[] pTable;
2044 }
2045 pVelocityTables->clear();
2046 delete pVelocityTables;
2047 pVelocityTables = NULL;
2048 }
2049 if (VelocityTable) delete[] VelocityTable;
2050 }
2051
2052 /**
2053 * Returns the correct amplitude factor for the given \a MIDIKeyVelocity.
2054 * All involved parameters (VelocityResponseCurve, VelocityResponseDepth
2055 * and VelocityResponseCurveScaling) involved are taken into account to
2056 * calculate the amplitude factor. Use this method when a key was
2057 * triggered to get the volume with which the sample should be played
2058 * back.
2059 *
2060 * @param MIDIKeyVelocity MIDI velocity value of the triggered key (between 0 and 127)
2061 * @returns amplitude factor (between 0.0 and 1.0)
2062 */
2063 double DimensionRegion::GetVelocityAttenuation(uint8_t MIDIKeyVelocity) {
2064 return pVelocityAttenuationTable[MIDIKeyVelocity];
2065 }
2066
2067 double DimensionRegion::GetVelocityRelease(uint8_t MIDIKeyVelocity) {
2068 return pVelocityReleaseTable[MIDIKeyVelocity];
2069 }
2070
2071 double DimensionRegion::GetVelocityCutoff(uint8_t MIDIKeyVelocity) {
2072 return pVelocityCutoffTable[MIDIKeyVelocity];
2073 }
2074
2075 double* DimensionRegion::CreateVelocityTable(curve_type_t curveType, uint8_t depth, uint8_t scaling) {
2076
2077 // line-segment approximations of the 15 velocity curves
2078
2079 // linear
2080 const int lin0[] = { 1, 1, 127, 127 };
2081 const int lin1[] = { 1, 21, 127, 127 };
2082 const int lin2[] = { 1, 45, 127, 127 };
2083 const int lin3[] = { 1, 74, 127, 127 };
2084 const int lin4[] = { 1, 127, 127, 127 };
2085
2086 // non-linear
2087 const int non0[] = { 1, 4, 24, 5, 57, 17, 92, 57, 122, 127, 127, 127 };
2088 const int non1[] = { 1, 4, 46, 9, 93, 56, 118, 106, 123, 127,
2089 127, 127 };
2090 const int non2[] = { 1, 4, 46, 9, 57, 20, 102, 107, 107, 127,
2091 127, 127 };
2092 const int non3[] = { 1, 15, 10, 19, 67, 73, 80, 80, 90, 98, 98, 127,
2093 127, 127 };
2094 const int non4[] = { 1, 25, 33, 57, 82, 81, 92, 127, 127, 127 };
2095
2096 // special
2097 const int spe0[] = { 1, 2, 76, 10, 90, 15, 95, 20, 99, 28, 103, 44,
2098 113, 127, 127, 127 };
2099 const int spe1[] = { 1, 2, 27, 5, 67, 18, 89, 29, 95, 35, 107, 67,
2100 118, 127, 127, 127 };
2101 const int spe2[] = { 1, 1, 33, 1, 53, 5, 61, 13, 69, 32, 79, 74,
2102 85, 90, 91, 127, 127, 127 };
2103 const int spe3[] = { 1, 32, 28, 35, 66, 48, 89, 59, 95, 65, 99, 73,
2104 117, 127, 127, 127 };
2105 const int spe4[] = { 1, 4, 23, 5, 49, 13, 57, 17, 92, 57, 122, 127,
2106 127, 127 };
2107
2108 // this is only used by the VCF velocity curve
2109 const int spe5[] = { 1, 2, 30, 5, 60, 19, 77, 70, 83, 85, 88, 106,
2110 91, 127, 127, 127 };
2111
2112 const int* const curves[] = { non0, non1, non2, non3, non4,
2113 lin0, lin1, lin2, lin3, lin4,
2114 spe0, spe1, spe2, spe3, spe4, spe5 };
2115
2116 double* const table = new double[128];
2117
2118 const int* curve = curves[curveType * 5 + depth];
2119 const int s = scaling == 0 ? 20 : scaling; // 0 or 20 means no scaling
2120
2121 table[0] = 0;
2122 for (int x = 1 ; x < 128 ; x++) {
2123
2124 if (x > curve[2]) curve += 2;
2125 double y = curve[1] + (x - curve[0]) *
2126 (double(curve[3] - curve[1]) / (curve[2] - curve[0]));
2127 y = y / 127;
2128
2129 // Scale up for s > 20, down for s < 20. When
2130 // down-scaling, the curve still ends at 1.0.
2131 if (s < 20 && y >= 0.5)
2132 y = y / ((2 - 40.0 / s) * y + 40.0 / s - 1);
2133 else
2134 y = y * (s / 20.0);
2135 if (y > 1) y = 1;
2136
2137 table[x] = y;
2138 }
2139 return table;
2140 }
2141
2142
2143 // *************** Region ***************
2144 // *
2145
2146 Region::Region(Instrument* pInstrument, RIFF::List* rgnList) : DLS::Region((DLS::Instrument*) pInstrument, rgnList) {
2147 // Initialization
2148 Dimensions = 0;
2149 for (int i = 0; i < 256; i++) {
2150 pDimensionRegions[i] = NULL;
2151 }
2152 Layers = 1;
2153 File* file = (File*) GetParent()->GetParent();
2154 int dimensionBits = (file->pVersion && file->pVersion->major == 3) ? 8 : 5;
2155
2156 // Actual Loading
2157
2158 LoadDimensionRegions(rgnList);
2159
2160 RIFF::Chunk* _3lnk = rgnList->GetSubChunk(CHUNK_ID_3LNK);
2161 if (_3lnk) {
2162 DimensionRegions = _3lnk->ReadUint32();
2163 for (int i = 0; i < dimensionBits; i++) {
2164 dimension_t dimension = static_cast<dimension_t>(_3lnk->ReadUint8());
2165 uint8_t bits = _3lnk->ReadUint8();
2166 _3lnk->ReadUint8(); // bit position of the dimension (bits[0] + bits[1] + ... + bits[i-1])
2167 _3lnk->ReadUint8(); // (1 << bit position of next dimension) - (1 << bit position of this dimension)
2168 uint8_t zones = _3lnk->ReadUint8(); // new for v3: number of zones doesn't have to be == pow(2,bits)
2169 if (dimension == dimension_none) { // inactive dimension
2170 pDimensionDefinitions[i].dimension = dimension_none;
2171 pDimensionDefinitions[i].bits = 0;
2172 pDimensionDefinitions[i].zones = 0;
2173 pDimensionDefinitions[i].split_type = split_type_bit;
2174 pDimensionDefinitions[i].zone_size = 0;
2175 }
2176 else { // active dimension
2177 pDimensionDefinitions[i].dimension = dimension;
2178 pDimensionDefinitions[i].bits = bits;
2179 pDimensionDefinitions[i].zones = zones ? zones : 0x01 << bits; // = pow(2,bits)
2180 pDimensionDefinitions[i].split_type = __resolveSplitType(dimension);
2181 pDimensionDefinitions[i].zone_size = __resolveZoneSize(pDimensionDefinitions[i]);
2182 Dimensions++;
2183
2184 // if this is a layer dimension, remember the amount of layers
2185 if (dimension == dimension_layer) Layers = pDimensionDefinitions[i].zones;
2186 }
2187 _3lnk->SetPos(3, RIFF::stream_curpos); // jump forward to next dimension definition
2188 }
2189 for (int i = dimensionBits ; i < 8 ; i++) pDimensionDefinitions[i].bits = 0;
2190
2191 // if there's a velocity dimension and custom velocity zone splits are used,
2192 // update the VelocityTables in the dimension regions
2193 UpdateVelocityTable();
2194
2195 // jump to start of the wave pool indices (if not already there)
2196 if (file->pVersion && file->pVersion->major == 3)
2197 _3lnk->SetPos(68); // version 3 has a different 3lnk structure
2198 else
2199 _3lnk->SetPos(44);
2200
2201 // load sample references
2202 for (uint i = 0; i < DimensionRegions; i++) {
2203 uint32_t wavepoolindex = _3lnk->ReadUint32();
2204 if (file->pWavePoolTable) pDimensionRegions[i]->pSample = GetSampleFromWavePool(wavepoolindex);
2205 }
2206 GetSample(); // load global region sample reference
2207 } else {
2208 DimensionRegions = 0;
2209 for (int i = 0 ; i < 8 ; i++) {
2210 pDimensionDefinitions[i].dimension = dimension_none;
2211 pDimensionDefinitions[i].bits = 0;
2212 pDimensionDefinitions[i].zones = 0;
2213 }
2214 }
2215
2216 // make sure there is at least one dimension region
2217 if (!DimensionRegions) {
2218 RIFF::List* _3prg = rgnList->GetSubList(LIST_TYPE_3PRG);
2219 if (!_3prg) _3prg = rgnList->AddSubList(LIST_TYPE_3PRG);
2220 RIFF::List* _3ewl = _3prg->AddSubList(LIST_TYPE_3EWL);
2221 pDimensionRegions[0] = new DimensionRegion(_3ewl);
2222 DimensionRegions = 1;
2223 }
2224 }
2225
2226 /**
2227 * Apply Region settings and all its DimensionRegions to the respective
2228 * RIFF chunks. You have to call File::Save() to make changes persistent.
2229 *
2230 * Usually there is absolutely no need to call this method explicitly.
2231 * It will be called automatically when File::Save() was called.
2232 *
2233 * @throws gig::Exception if samples cannot be dereferenced
2234 */
2235 void Region::UpdateChunks() {
2236 // in the gig format we don't care about the Region's sample reference
2237 // but we still have to provide some existing one to not corrupt the
2238 // file, so to avoid the latter we simply always assign the sample of
2239 // the first dimension region of this region
2240 pSample = pDimensionRegions[0]->pSample;
2241
2242 // first update base class's chunks
2243 DLS::Region::UpdateChunks();
2244
2245 // update dimension region's chunks
2246 for (int i = 0; i < DimensionRegions; i++) {
2247 pDimensionRegions[i]->UpdateChunks();
2248 }
2249
2250 File* pFile = (File*) GetParent()->GetParent();
2251 const int iMaxDimensions = (pFile->pVersion && pFile->pVersion->major == 3) ? 8 : 5;
2252 const int iMaxDimensionRegions = (pFile->pVersion && pFile->pVersion->major == 3) ? 256 : 32;
2253
2254 // make sure '3lnk' chunk exists
2255 RIFF::Chunk* _3lnk = pCkRegion->GetSubChunk(CHUNK_ID_3LNK);
2256 if (!_3lnk) {
2257 const int _3lnkChunkSize = (pFile->pVersion && pFile->pVersion->major == 3) ? 1092 : 172;
2258 _3lnk = pCkRegion->AddSubChunk(CHUNK_ID_3LNK, _3lnkChunkSize);
2259 memset(_3lnk->LoadChunkData(), 0, _3lnkChunkSize);
2260
2261 // move 3prg to last position
2262 pCkRegion->MoveSubChunk(pCkRegion->GetSubList(LIST_TYPE_3PRG), 0);
2263 }
2264
2265 // update dimension definitions in '3lnk' chunk
2266 uint8_t* pData = (uint8_t*) _3lnk->LoadChunkData();
2267 store32(&pData[0], DimensionRegions);
2268 int shift = 0;
2269 for (int i = 0; i < iMaxDimensions; i++) {
2270 pData[4 + i * 8] = (uint8_t) pDimensionDefinitions[i].dimension;
2271 pData[5 + i * 8] = pDimensionDefinitions[i].bits;
2272 pData[6 + i * 8] = shift;
2273 pData[7 + i * 8] = (1 << (shift + pDimensionDefinitions[i].bits)) - (1 << shift);
2274 pData[8 + i * 8] = pDimensionDefinitions[i].zones;
2275 // next 3 bytes unknown, always zero?
2276
2277 shift += pDimensionDefinitions[i].bits;
2278 }
2279
2280 // update wave pool table in '3lnk' chunk
2281 const int iWavePoolOffset = (pFile->pVersion && pFile->pVersion->major == 3) ? 68 : 44;
2282 for (uint i = 0; i < iMaxDimensionRegions; i++) {
2283 int iWaveIndex = -1;
2284 if (i < DimensionRegions) {
2285 if (!pFile->pSamples || !pFile->pSamples->size()) throw gig::Exception("Could not update gig::Region, there are no samples");
2286 File::SampleList::iterator iter = pFile->pSamples->begin();
2287 File::SampleList::iterator end = pFile->pSamples->end();
2288 for (int index = 0; iter != end; ++iter, ++index) {
2289 if (*iter == pDimensionRegions[i]->pSample) {
2290 iWaveIndex = index;
2291 break;
2292 }
2293 }
2294 if (iWaveIndex < 0) throw gig::Exception("Could not update gig::Region, could not find DimensionRegion's sample");
2295 }
2296 store32(&pData[iWavePoolOffset + i * 4], iWaveIndex);
2297 }
2298 }
2299
2300 void Region::LoadDimensionRegions(RIFF::List* rgn) {
2301 RIFF::List* _3prg = rgn->GetSubList(LIST_TYPE_3PRG);
2302 if (_3prg) {
2303 int dimensionRegionNr = 0;
2304 RIFF::List* _3ewl = _3prg->GetFirstSubList();
2305 while (_3ewl) {
2306 if (_3ewl->GetListType() == LIST_TYPE_3EWL) {
2307 pDimensionRegions[dimensionRegionNr] = new DimensionRegion(_3ewl);
2308 dimensionRegionNr++;
2309 }
2310 _3ewl = _3prg->GetNextSubList();
2311 }
2312 if (dimensionRegionNr == 0) throw gig::Exception("No dimension region found.");
2313 }
2314 }
2315
2316 void Region::UpdateVelocityTable() {
2317 // get velocity dimension's index
2318 int veldim = -1;
2319 for (int i = 0 ; i < Dimensions ; i++) {
2320 if (pDimensionDefinitions[i].dimension == gig::dimension_velocity) {
2321 veldim = i;
2322 break;
2323 }
2324 }
2325 if (veldim == -1) return;
2326
2327 int step = 1;
2328 for (int i = 0 ; i < veldim ; i++) step <<= pDimensionDefinitions[i].bits;
2329 int skipveldim = (step << pDimensionDefinitions[veldim].bits) - step;
2330 int end = step * pDimensionDefinitions[veldim].zones;
2331
2332 // loop through all dimension regions for all dimensions except the velocity dimension
2333 int dim[8] = { 0 };
2334 for (int i = 0 ; i < DimensionRegions ; i++) {
2335
2336 if (pDimensionRegions[i]->DimensionUpperLimits[veldim] ||
2337 pDimensionRegions[i]->VelocityUpperLimit) {
2338 // create the velocity table
2339 uint8_t* table = pDimensionRegions[i]->VelocityTable;
2340 if (!table) {
2341 table = new uint8_t[128];
2342 pDimensionRegions[i]->VelocityTable = table;
2343 }
2344 int tableidx = 0;
2345 int velocityZone = 0;
2346 if (pDimensionRegions[i]->DimensionUpperLimits[veldim]) { // gig3
2347 for (int k = i ; k < end ; k += step) {
2348 DimensionRegion *d = pDimensionRegions[k];
2349 for (; tableidx <= d->DimensionUpperLimits[veldim] ; tableidx++) table[tableidx] = velocityZone;
2350 velocityZone++;
2351 }
2352 } else { // gig2
2353 for (int k = i ; k < end ; k += step) {
2354 DimensionRegion *d = pDimensionRegions[k];
2355 for (; tableidx <= d->VelocityUpperLimit ; tableidx++) table[tableidx] = velocityZone;
2356 velocityZone++;
2357 }
2358 }
2359 } else {
2360 if (pDimensionRegions[i]->VelocityTable) {
2361 delete[] pDimensionRegions[i]->VelocityTable;
2362 pDimensionRegions[i]->VelocityTable = 0;
2363 }
2364 }
2365
2366 int j;
2367 int shift = 0;
2368 for (j = 0 ; j < Dimensions ; j++) {
2369 if (j == veldim) i += skipveldim; // skip velocity dimension
2370 else {
2371 dim[j]++;
2372 if (dim[j] < pDimensionDefinitions[j].zones) break;
2373 else {
2374 // skip unused dimension regions
2375 dim[j] = 0;
2376 i += ((1 << pDimensionDefinitions[j].bits) -
2377 pDimensionDefinitions[j].zones) << shift;
2378 }
2379 }
2380 shift += pDimensionDefinitions[j].bits;
2381 }
2382 if (j == Dimensions) break;
2383 }
2384 }
2385
2386 /** @brief Einstein would have dreamed of it - create a new dimension.
2387 *
2388 * Creates a new dimension with the dimension definition given by
2389 * \a pDimDef. The appropriate amount of DimensionRegions will be created.
2390 * There is a hard limit of dimensions and total amount of "bits" all
2391 * dimensions can have. This limit is dependant to what gig file format
2392 * version this file refers to. The gig v2 (and lower) format has a
2393 * dimension limit and total amount of bits limit of 5, whereas the gig v3
2394 * format has a limit of 8.
2395 *
2396 * @param pDimDef - defintion of the new dimension
2397 * @throws gig::Exception if dimension of the same type exists already
2398 * @throws gig::Exception if amount of dimensions or total amount of
2399 * dimension bits limit is violated
2400 */
2401 void Region::AddDimension(dimension_def_t* pDimDef) {
2402 // check if max. amount of dimensions reached
2403 File* file = (File*) GetParent()->GetParent();
2404 const int iMaxDimensions = (file->pVersion && file->pVersion->major == 3) ? 8 : 5;
2405 if (Dimensions >= iMaxDimensions)
2406 throw gig::Exception("Could not add new dimension, max. amount of " + ToString(iMaxDimensions) + " dimensions already reached");
2407 // check if max. amount of dimension bits reached
2408 int iCurrentBits = 0;
2409 for (int i = 0; i < Dimensions; i++)
2410 iCurrentBits += pDimensionDefinitions[i].bits;
2411 if (iCurrentBits >= iMaxDimensions)
2412 throw gig::Exception("Could not add new dimension, max. amount of " + ToString(iMaxDimensions) + " dimension bits already reached");
2413 const int iNewBits = iCurrentBits + pDimDef->bits;
2414 if (iNewBits > iMaxDimensions)
2415 throw gig::Exception("Could not add new dimension, new dimension would exceed max. amount of " + ToString(iMaxDimensions) + " dimension bits");
2416 // check if there's already a dimensions of the same type
2417 for (int i = 0; i < Dimensions; i++)
2418 if (pDimensionDefinitions[i].dimension == pDimDef->dimension)
2419 throw gig::Exception("Could not add new dimension, there is already a dimension of the same type");
2420
2421 // assign definition of new dimension
2422 pDimensionDefinitions[Dimensions] = *pDimDef;
2423
2424 // auto correct certain dimension definition fields (where possible)
2425 pDimensionDefinitions[Dimensions].split_type =
2426 __resolveSplitType(pDimensionDefinitions[Dimensions].dimension);
2427 pDimensionDefinitions[Dimensions].zone_size =
2428 __resolveZoneSize(pDimensionDefinitions[Dimensions]);
2429
2430 // create new dimension region(s) for this new dimension
2431 for (int i = 1 << iCurrentBits; i < 1 << iNewBits; i++) {
2432 //TODO: maybe we should copy existing dimension regions if possible instead of simply creating new ones with default values
2433 RIFF::List* _3prg = pCkRegion->GetSubList(LIST_TYPE_3PRG);
2434 RIFF::List* pNewDimRgnListChunk = _3prg->AddSubList(LIST_TYPE_3EWL);
2435 pDimensionRegions[i] = new DimensionRegion(pNewDimRgnListChunk);
2436 DimensionRegions++;
2437 }
2438
2439 Dimensions++;
2440
2441 // if this is a layer dimension, update 'Layers' attribute
2442 if (pDimDef->dimension == dimension_layer) Layers = pDimDef->zones;
2443
2444 UpdateVelocityTable();
2445 }
2446
2447 /** @brief Delete an existing dimension.
2448 *
2449 * Deletes the dimension given by \a pDimDef and deletes all respective
2450 * dimension regions, that is all dimension regions where the dimension's
2451 * bit(s) part is greater than 0. In case of a 'sustain pedal' dimension
2452 * for example this would delete all dimension regions for the case(s)
2453 * where the sustain pedal is pressed down.
2454 *
2455 * @param pDimDef - dimension to delete
2456 * @throws gig::Exception if given dimension cannot be found
2457 */
2458 void Region::DeleteDimension(dimension_def_t* pDimDef) {
2459 // get dimension's index
2460 int iDimensionNr = -1;
2461 for (int i = 0; i < Dimensions; i++) {
2462 if (&pDimensionDefinitions[i] == pDimDef) {
2463 iDimensionNr = i;
2464 break;
2465 }
2466 }
2467 if (iDimensionNr < 0) throw gig::Exception("Invalid dimension_def_t pointer");
2468
2469 // get amount of bits below the dimension to delete
2470 int iLowerBits = 0;
2471 for (int i = 0; i < iDimensionNr; i++)
2472 iLowerBits += pDimensionDefinitions[i].bits;
2473
2474 // get amount ot bits above the dimension to delete
2475 int iUpperBits = 0;
2476 for (int i = iDimensionNr + 1; i < Dimensions; i++)
2477 iUpperBits += pDimensionDefinitions[i].bits;
2478
2479 // delete dimension regions which belong to the given dimension
2480 // (that is where the dimension's bit > 0)
2481 for (int iUpperBit = 0; iUpperBit < 1 << iUpperBits; iUpperBit++) {
2482 for (int iObsoleteBit = 1; iObsoleteBit < 1 << pDimensionDefinitions[iDimensionNr].bits; iObsoleteBit++) {
2483 for (int iLowerBit = 0; iLowerBit < 1 << iLowerBits; iLowerBit++) {
2484 int iToDelete = iUpperBit << (pDimensionDefinitions[iDimensionNr].bits + iLowerBits) |
2485 iObsoleteBit << iLowerBits |
2486 iLowerBit;
2487 delete pDimensionRegions[iToDelete];
2488 pDimensionRegions[iToDelete] = NULL;
2489 DimensionRegions--;
2490 }
2491 }
2492 }
2493
2494 // defrag pDimensionRegions array
2495 // (that is remove the NULL spaces within the pDimensionRegions array)
2496 for (int iFrom = 2, iTo = 1; iFrom < 256 && iTo < 256 - 1; iTo++) {
2497 if (!pDimensionRegions[iTo]) {
2498 if (iFrom <= iTo) iFrom = iTo + 1;
2499 while (!pDimensionRegions[iFrom] && iFrom < 256) iFrom++;
2500 if (iFrom < 256 && pDimensionRegions[iFrom]) {
2501 pDimensionRegions[iTo] = pDimensionRegions[iFrom];
2502 pDimensionRegions[iFrom] = NULL;
2503 }
2504 }
2505 }
2506
2507 // 'remove' dimension definition
2508 for (int i = iDimensionNr + 1; i < Dimensions; i++) {
2509 pDimensionDefinitions[i - 1] = pDimensionDefinitions[i];
2510 }
2511 pDimensionDefinitions[Dimensions - 1].dimension = dimension_none;
2512 pDimensionDefinitions[Dimensions - 1].bits = 0;
2513 pDimensionDefinitions[Dimensions - 1].zones = 0;
2514
2515 Dimensions--;
2516
2517 // if this was a layer dimension, update 'Layers' attribute
2518 if (pDimDef->dimension == dimension_layer) Layers = 1;
2519 }
2520
2521 Region::~Region() {
2522 for (int i = 0; i < 256; i++) {
2523 if (pDimensionRegions[i]) delete pDimensionRegions[i];
2524 }
2525 }
2526
2527 /**
2528 * Use this method in your audio engine to get the appropriate dimension
2529 * region with it's articulation data for the current situation. Just
2530 * call the method with the current MIDI controller values and you'll get
2531 * the DimensionRegion with the appropriate articulation data for the
2532 * current situation (for this Region of course only). To do that you'll
2533 * first have to look which dimensions with which controllers and in
2534 * which order are defined for this Region when you load the .gig file.
2535 * Special cases are e.g. layer or channel dimensions where you just put
2536 * in the index numbers instead of a MIDI controller value (means 0 for
2537 * left channel, 1 for right channel or 0 for layer 0, 1 for layer 1,
2538 * etc.).
2539 *
2540 * @param DimValues MIDI controller values (0-127) for dimension 0 to 7
2541 * @returns adress to the DimensionRegion for the given situation
2542 * @see pDimensionDefinitions
2543 * @see Dimensions
2544 */
2545 DimensionRegion* Region::GetDimensionRegionByValue(const uint DimValues[8]) {
2546 uint8_t bits;
2547 int veldim = -1;
2548 int velbitpos;
2549 int bitpos = 0;
2550 int dimregidx = 0;
2551 for (uint i = 0; i < Dimensions; i++) {
2552 if (pDimensionDefinitions[i].dimension == dimension_velocity) {
2553 // the velocity dimension must be handled after the other dimensions
2554 veldim = i;
2555 velbitpos = bitpos;
2556 } else {
2557 switch (pDimensionDefinitions[i].split_type) {
2558 case split_type_normal:
2559 if (pDimensionRegions[0]->DimensionUpperLimits[i]) {
2560 // gig3: all normal dimensions (not just the velocity dimension) have custom zone ranges
2561 for (bits = 0 ; bits < pDimensionDefinitions[i].zones ; bits++) {
2562 if (DimValues[i] <= pDimensionRegions[bits << bitpos]->DimensionUpperLimits[i]) break;
2563 }
2564 } else {
2565 // gig2: evenly sized zones
2566 bits = uint8_t(DimValues[i] / pDimensionDefinitions[i].zone_size);
2567 }
2568 break;
2569 case split_type_bit: // the value is already the sought dimension bit number
2570 const uint8_t limiter_mask = (0xff << pDimensionDefinitions[i].bits) ^ 0xff;
2571 bits = DimValues[i] & limiter_mask; // just make sure the value doesn't use more bits than allowed
2572 break;
2573 }
2574 dimregidx |= bits << bitpos;
2575 }
2576 bitpos += pDimensionDefinitions[i].bits;
2577 }
2578 DimensionRegion* dimreg = pDimensionRegions[dimregidx];
2579 if (veldim != -1) {
2580 // (dimreg is now the dimension region for the lowest velocity)
2581 if (dimreg->VelocityTable) // custom defined zone ranges
2582 bits = dimreg->VelocityTable[DimValues[veldim]];
2583 else // normal split type
2584 bits = uint8_t(DimValues[veldim] / pDimensionDefinitions[veldim].zone_size);
2585
2586 dimregidx |= bits << velbitpos;
2587 dimreg = pDimensionRegions[dimregidx];
2588 }
2589 return dimreg;
2590 }
2591
2592 /**
2593 * Returns the appropriate DimensionRegion for the given dimension bit
2594 * numbers (zone index). You usually use <i>GetDimensionRegionByValue</i>
2595 * instead of calling this method directly!
2596 *
2597 * @param DimBits Bit numbers for dimension 0 to 7
2598 * @returns adress to the DimensionRegion for the given dimension
2599 * bit numbers
2600 * @see GetDimensionRegionByValue()
2601 */
2602 DimensionRegion* Region::GetDimensionRegionByBit(const uint8_t DimBits[8]) {
2603 return pDimensionRegions[((((((DimBits[7] << pDimensionDefinitions[6].bits | DimBits[6])
2604 << pDimensionDefinitions[5].bits | DimBits[5])
2605 << pDimensionDefinitions[4].bits | DimBits[4])
2606 << pDimensionDefinitions[3].bits | DimBits[3])
2607 << pDimensionDefinitions[2].bits | DimBits[2])
2608 << pDimensionDefinitions[1].bits | DimBits[1])
2609 << pDimensionDefinitions[0].bits | DimBits[0]];
2610 }
2611
2612 /**
2613 * Returns pointer address to the Sample referenced with this region.
2614 * This is the global Sample for the entire Region (not sure if this is
2615 * actually used by the Gigasampler engine - I would only use the Sample
2616 * referenced by the appropriate DimensionRegion instead of this sample).
2617 *
2618 * @returns address to Sample or NULL if there is no reference to a
2619 * sample saved in the .gig file
2620 */
2621 Sample* Region::GetSample() {
2622 if (pSample) return static_cast<gig::Sample*>(pSample);
2623 else return static_cast<gig::Sample*>(pSample = GetSampleFromWavePool(WavePoolTableIndex));
2624 }
2625
2626 Sample* Region::GetSampleFromWavePool(unsigned int WavePoolTableIndex, progress_t* pProgress) {
2627 if ((int32_t)WavePoolTableIndex == -1) return NULL;
2628 File* file = (File*) GetParent()->GetParent();
2629 if (!file->pWavePoolTable) return NULL;
2630 unsigned long soughtoffset = file->pWavePoolTable[WavePoolTableIndex];
2631 unsigned long soughtfileno = file->pWavePoolTableHi[WavePoolTableIndex];
2632 Sample* sample = file->GetFirstSample(pProgress);
2633 while (sample) {
2634 if (sample->ulWavePoolOffset == soughtoffset &&
2635 sample->FileNo == soughtfileno) return static_cast<gig::Sample*>(sample);
2636 sample = file->GetNextSample();
2637 }
2638 return NULL;
2639 }
2640
2641
2642
2643 // *************** Instrument ***************
2644 // *
2645
2646 Instrument::Instrument(File* pFile, RIFF::List* insList, progress_t* pProgress) : DLS::Instrument((DLS::File*)pFile, insList) {
2647 static const DLS::Info::FixedStringLength fixedStringLengths[] = {
2648 { CHUNK_ID_INAM, 64 },
2649 { CHUNK_ID_ISFT, 12 },
2650 { 0, 0 }
2651 };
2652 pInfo->FixedStringLengths = fixedStringLengths;
2653
2654 // Initialization
2655 for (int i = 0; i < 128; i++) RegionKeyTable[i] = NULL;
2656 EffectSend = 0;
2657 Attenuation = 0;
2658 FineTune = 0;
2659 PitchbendRange = 0;
2660 PianoReleaseMode = false;
2661 DimensionKeyRange.low = 0;
2662 DimensionKeyRange.high = 0;
2663
2664 // Loading
2665 RIFF::List* lart = insList->GetSubList(LIST_TYPE_LART);
2666 if (lart) {
2667 RIFF::Chunk* _3ewg = lart->GetSubChunk(CHUNK_ID_3EWG);
2668 if (_3ewg) {
2669 EffectSend = _3ewg->ReadUint16();
2670 Attenuation = _3ewg->ReadInt32();
2671 FineTune = _3ewg->ReadInt16();
2672 PitchbendRange = _3ewg->ReadInt16();
2673 uint8_t dimkeystart = _3ewg->ReadUint8();
2674 PianoReleaseMode = dimkeystart & 0x01;
2675 DimensionKeyRange.low = dimkeystart >> 1;
2676 DimensionKeyRange.high = _3ewg->ReadUint8();
2677 }
2678 }
2679
2680 if (!pRegions) pRegions = new RegionList;
2681 RIFF::List* lrgn = insList->GetSubList(LIST_TYPE_LRGN);
2682 if (lrgn) {
2683 RIFF::List* rgn = lrgn->GetFirstSubList();
2684 while (rgn) {
2685 if (rgn->GetListType() == LIST_TYPE_RGN) {
2686 __notify_progress(pProgress, (float) pRegions->size() / (float) Regions);
2687 pRegions->push_back(new Region(this, rgn));
2688 }
2689 rgn = lrgn->GetNextSubList();
2690 }
2691 // Creating Region Key Table for fast lookup
2692 UpdateRegionKeyTable();
2693 }
2694
2695 __notify_progress(pProgress, 1.0f); // notify done
2696 }
2697
2698 void Instrument::UpdateRegionKeyTable() {
2699 RegionList::iterator iter = pRegions->begin();
2700 RegionList::iterator end = pRegions->end();
2701 for (; iter != end; ++iter) {
2702 gig::Region* pRegion = static_cast<gig::Region*>(*iter);
2703 for (int iKey = pRegion->KeyRange.low; iKey <= pRegion->KeyRange.high; iKey++) {
2704 RegionKeyTable[iKey] = pRegion;
2705 }
2706 }
2707 }
2708
2709 Instrument::~Instrument() {
2710 }
2711
2712 /**
2713 * Apply Instrument with all its Regions to the respective RIFF chunks.
2714 * You have to call File::Save() to make changes persistent.
2715 *
2716 * Usually there is absolutely no need to call this method explicitly.
2717 * It will be called automatically when File::Save() was called.
2718 *
2719 * @throws gig::Exception if samples cannot be dereferenced
2720 */
2721 void Instrument::UpdateChunks() {
2722 // first update base classes' chunks
2723 DLS::Instrument::UpdateChunks();
2724
2725 // update Regions' chunks
2726 {
2727 RegionList::iterator iter = pRegions->begin();
2728 RegionList::iterator end = pRegions->end();
2729 for (; iter != end; ++iter)
2730 (*iter)->UpdateChunks();
2731 }
2732
2733 // make sure 'lart' RIFF list chunk exists
2734 RIFF::List* lart = pCkInstrument->GetSubList(LIST_TYPE_LART);
2735 if (!lart) lart = pCkInstrument->AddSubList(LIST_TYPE_LART);
2736 // make sure '3ewg' RIFF chunk exists
2737 RIFF::Chunk* _3ewg = lart->GetSubChunk(CHUNK_ID_3EWG);
2738 if (!_3ewg) _3ewg = lart->AddSubChunk(CHUNK_ID_3EWG, 12);
2739 // update '3ewg' RIFF chunk
2740 uint8_t* pData = (uint8_t*) _3ewg->LoadChunkData();
2741 store16(&pData[0], EffectSend);
2742 store32(&pData[2], Attenuation);
2743 store16(&pData[6], FineTune);
2744 store16(&pData[8], PitchbendRange);
2745 const uint8_t dimkeystart = (PianoReleaseMode) ? 0x01 : 0x00 |
2746 DimensionKeyRange.low << 1;
2747 pData[10] = dimkeystart;
2748 pData[11] = DimensionKeyRange.high;
2749 }
2750
2751 /**
2752 * Returns the appropriate Region for a triggered note.
2753 *
2754 * @param Key MIDI Key number of triggered note / key (0 - 127)
2755 * @returns pointer adress to the appropriate Region or NULL if there
2756 * there is no Region defined for the given \a Key
2757 */
2758 Region* Instrument::GetRegion(unsigned int Key) {
2759 if (!pRegions || !pRegions->size() || Key > 127) return NULL;
2760 return RegionKeyTable[Key];
2761
2762 /*for (int i = 0; i < Regions; i++) {
2763 if (Key <= pRegions[i]->KeyRange.high &&
2764 Key >= pRegions[i]->KeyRange.low) return pRegions[i];
2765 }
2766 return NULL;*/
2767 }
2768
2769 /**
2770 * Returns the first Region of the instrument. You have to call this
2771 * method once before you use GetNextRegion().
2772 *
2773 * @returns pointer address to first region or NULL if there is none
2774 * @see GetNextRegion()
2775 */
2776 Region* Instrument::GetFirstRegion() {
2777 if (!pRegions) return NULL;
2778 RegionsIterator = pRegions->begin();
2779 return static_cast<gig::Region*>( (RegionsIterator != pRegions->end()) ? *RegionsIterator : NULL );
2780 }
2781
2782 /**
2783 * Returns the next Region of the instrument. You have to call
2784 * GetFirstRegion() once before you can use this method. By calling this
2785 * method multiple times it iterates through the available Regions.
2786 *
2787 * @returns pointer address to the next region or NULL if end reached
2788 * @see GetFirstRegion()
2789 */
2790 Region* Instrument::GetNextRegion() {
2791 if (!pRegions) return NULL;
2792 RegionsIterator++;
2793 return static_cast<gig::Region*>( (RegionsIterator != pRegions->end()) ? *RegionsIterator : NULL );
2794 }
2795
2796 Region* Instrument::AddRegion() {
2797 // create new Region object (and its RIFF chunks)
2798 RIFF::List* lrgn = pCkInstrument->GetSubList(LIST_TYPE_LRGN);
2799 if (!lrgn) lrgn = pCkInstrument->AddSubList(LIST_TYPE_LRGN);
2800 RIFF::List* rgn = lrgn->AddSubList(LIST_TYPE_RGN);
2801 Region* pNewRegion = new Region(this, rgn);
2802 pRegions->push_back(pNewRegion);
2803 Regions = pRegions->size();
2804 // update Region key table for fast lookup
2805 UpdateRegionKeyTable();
2806 // done
2807 return pNewRegion;
2808 }
2809
2810 void Instrument::DeleteRegion(Region* pRegion) {
2811 if (!pRegions) return;
2812 DLS::Instrument::DeleteRegion((DLS::Region*) pRegion);
2813 // update Region key table for fast lookup
2814 UpdateRegionKeyTable();
2815 }
2816
2817
2818
2819 // *************** Group ***************
2820 // *
2821
2822 /** @brief Constructor.
2823 *
2824 * @param file - pointer to the gig::File object
2825 * @param ck3gnm - pointer to 3gnm chunk associated with this group or
2826 * NULL if this is a new Group
2827 */
2828 Group::Group(File* file, RIFF::Chunk* ck3gnm) {
2829 pFile = file;
2830 pNameChunk = ck3gnm;
2831 ::LoadString(pNameChunk, Name);
2832 }
2833
2834 Group::~Group() {
2835 // remove the chunk associated with this group (if any)
2836 if (pNameChunk) pNameChunk->GetParent()->DeleteSubChunk(pNameChunk);
2837 }
2838
2839 /** @brief Update chunks with current group settings.
2840 *
2841 * Apply current Group field values to the respective chunks. You have
2842 * to call File::Save() to make changes persistent.
2843 *
2844 * Usually there is absolutely no need to call this method explicitly.
2845 * It will be called automatically when File::Save() was called.
2846 */
2847 void Group::UpdateChunks() {
2848 // make sure <3gri> and <3gnl> list chunks exist
2849 RIFF::List* _3gri = pFile->pRIFF->GetSubList(LIST_TYPE_3GRI);
2850 if (!_3gri) {
2851 _3gri = pFile->pRIFF->AddSubList(LIST_TYPE_3GRI);
2852 pFile->pRIFF->MoveSubChunk(_3gri, pFile->pRIFF->GetSubChunk(CHUNK_ID_PTBL));
2853 }
2854 RIFF::List* _3gnl = _3gri->GetSubList(LIST_TYPE_3GNL);
2855 if (!_3gnl) _3gnl = _3gri->AddSubList(LIST_TYPE_3GNL);
2856 // now store the name of this group as <3gnm> chunk as subchunk of the <3gnl> list chunk
2857 ::SaveString(CHUNK_ID_3GNM, pNameChunk, _3gnl, Name, String("Unnamed Group"), true, 64);
2858 }
2859
2860 /**
2861 * Returns the first Sample of this Group. You have to call this method
2862 * once before you use GetNextSample().
2863 *
2864 * <b>Notice:</b> this method might block for a long time, in case the
2865 * samples of this .gig file were not scanned yet
2866 *
2867 * @returns pointer address to first Sample or NULL if there is none
2868 * applied to this Group
2869 * @see GetNextSample()
2870 */
2871 Sample* Group::GetFirstSample() {
2872 // FIXME: lazy und unsafe implementation, should be an autonomous iterator
2873 for (Sample* pSample = pFile->GetFirstSample(); pSample; pSample = pFile->GetNextSample()) {
2874 if (pSample->GetGroup() == this) return pSample;
2875 }
2876 return NULL;
2877 }
2878
2879 /**
2880 * Returns the next Sample of the Group. You have to call
2881 * GetFirstSample() once before you can use this method. By calling this
2882 * method multiple times it iterates through the Samples assigned to
2883 * this Group.
2884 *
2885 * @returns pointer address to the next Sample of this Group or NULL if
2886 * end reached
2887 * @see GetFirstSample()
2888 */
2889 Sample* Group::GetNextSample() {
2890 // FIXME: lazy und unsafe implementation, should be an autonomous iterator
2891 for (Sample* pSample = pFile->GetNextSample(); pSample; pSample = pFile->GetNextSample()) {
2892 if (pSample->GetGroup() == this) return pSample;
2893 }
2894 return NULL;
2895 }
2896
2897 /**
2898 * Move Sample given by \a pSample from another Group to this Group.
2899 */
2900 void Group::AddSample(Sample* pSample) {
2901 pSample->pGroup = this;
2902 }
2903
2904 /**
2905 * Move all members of this group to another group (preferably the 1st
2906 * one except this). This method is called explicitly by
2907 * File::DeleteGroup() thus when a Group was deleted. This code was
2908 * intentionally not placed in the destructor!
2909 */
2910 void Group::MoveAll() {
2911 // get "that" other group first
2912 Group* pOtherGroup = NULL;
2913 for (pOtherGroup = pFile->GetFirstGroup(); pOtherGroup; pOtherGroup = pFile->GetNextGroup()) {
2914 if (pOtherGroup != this) break;
2915 }
2916 if (!pOtherGroup) throw Exception(
2917 "Could not move samples to another group, since there is no "
2918 "other Group. This is a bug, report it!"
2919 );
2920 // now move all samples of this group to the other group
2921 for (Sample* pSample = GetFirstSample(); pSample; pSample = GetNextSample()) {
2922 pOtherGroup->AddSample(pSample);
2923 }
2924 }
2925
2926
2927
2928 // *************** File ***************
2929 // *
2930
2931 // File version 2.0, 1998-06-28
2932 const DLS::version_t File::VERSION_2 = {
2933 0, 2, 19980628 & 0xffff, 19980628 >> 16
2934 };
2935
2936 // File version 3.0, 2003-03-31
2937 const DLS::version_t File::VERSION_3 = {
2938 0, 3, 20030331 & 0xffff, 20030331 >> 16
2939 };
2940
2941 const DLS::Info::FixedStringLength File::FixedStringLengths[] = {
2942 { CHUNK_ID_IARL, 256 },
2943 { CHUNK_ID_IART, 128 },
2944 { CHUNK_ID_ICMS, 128 },
2945 { CHUNK_ID_ICMT, 1024 },
2946 { CHUNK_ID_ICOP, 128 },
2947 { CHUNK_ID_ICRD, 128 },
2948 { CHUNK_ID_IENG, 128 },
2949 { CHUNK_ID_IGNR, 128 },
2950 { CHUNK_ID_IKEY, 128 },
2951 { CHUNK_ID_IMED, 128 },
2952 { CHUNK_ID_INAM, 128 },
2953 { CHUNK_ID_IPRD, 128 },
2954 { CHUNK_ID_ISBJ, 128 },
2955 { CHUNK_ID_ISFT, 128 },
2956 { CHUNK_ID_ISRC, 128 },
2957 { CHUNK_ID_ISRF, 128 },
2958 { CHUNK_ID_ITCH, 128 },
2959 { 0, 0 }
2960 };
2961
2962 File::File() : DLS::File() {
2963 pGroups = NULL;
2964 pInfo->FixedStringLengths = FixedStringLengths;
2965 pInfo->ArchivalLocation = String(256, ' ');
2966
2967 // add some mandatory chunks to get the file chunks in right
2968 // order (INFO chunk will be moved to first position later)
2969 pRIFF->AddSubChunk(CHUNK_ID_VERS, 8);
2970 pRIFF->AddSubChunk(CHUNK_ID_COLH, 4);
2971 }
2972
2973 File::File(RIFF::File* pRIFF) : DLS::File(pRIFF) {
2974 pGroups = NULL;
2975 pInfo->FixedStringLengths = FixedStringLengths;
2976 }
2977
2978 File::~File() {
2979 if (pGroups) {
2980 std::list<Group*>::iterator iter = pGroups->begin();
2981 std::list<Group*>::iterator end = pGroups->end();
2982 while (iter != end) {
2983 delete *iter;
2984 ++iter;
2985 }
2986 delete pGroups;
2987 }
2988 }
2989
2990 Sample* File::GetFirstSample(progress_t* pProgress) {
2991 if (!pSamples) LoadSamples(pProgress);
2992 if (!pSamples) return NULL;
2993 SamplesIterator = pSamples->begin();
2994 return static_cast<gig::Sample*>( (SamplesIterator != pSamples->end()) ? *SamplesIterator : NULL );
2995 }
2996
2997 Sample* File::GetNextSample() {
2998 if (!pSamples) return NULL;
2999 SamplesIterator++;
3000 return static_cast<gig::Sample*>( (SamplesIterator != pSamples->end()) ? *SamplesIterator : NULL );
3001 }
3002
3003 /** @brief Add a new sample.
3004 *
3005 * This will create a new Sample object for the gig file. You have to
3006 * call Save() to make this persistent to the file.
3007 *
3008 * @returns pointer to new Sample object
3009 */
3010 Sample* File::AddSample() {
3011 if (!pSamples) LoadSamples();
3012 __ensureMandatoryChunksExist();
3013 RIFF::List* wvpl = pRIFF->GetSubList(LIST_TYPE_WVPL);
3014 // create new Sample object and its respective 'wave' list chunk
3015 RIFF::List* wave = wvpl->AddSubList(LIST_TYPE_WAVE);
3016 Sample* pSample = new Sample(this, wave, 0 /*arbitrary value, we update offsets when we save*/);
3017
3018 // add mandatory chunks to get the chunks in right order
3019 wave->AddSubChunk(CHUNK_ID_FMT, 16);
3020 wave->AddSubList(LIST_TYPE_INFO);
3021
3022 pSamples->push_back(pSample);
3023 return pSample;
3024 }
3025
3026 /** @brief Delete a sample.
3027 *
3028 * This will delete the given Sample object from the gig file. You have
3029 * to call Save() to make this persistent to the file.
3030 *
3031 * @param pSample - sample to delete
3032 * @throws gig::Exception if given sample could not be found
3033 */
3034 void File::DeleteSample(Sample* pSample) {
3035 if (!pSamples || !pSamples->size()) throw gig::Exception("Could not delete sample as there are no samples");
3036 SampleList::iterator iter = find(pSamples->begin(), pSamples->end(), (DLS::Sample*) pSample);
3037 if (iter == pSamples->end()) throw gig::Exception("Could not delete sample, could not find given sample");
3038 if (SamplesIterator != pSamples->end() && *SamplesIterator == pSample) ++SamplesIterator; // avoid iterator invalidation
3039 pSamples->erase(iter);
3040 delete pSample;
3041 }
3042
3043 void File::LoadSamples() {
3044 LoadSamples(NULL);
3045 }
3046
3047 void File::LoadSamples(progress_t* pProgress) {
3048 // Groups must be loaded before samples, because samples will try
3049 // to resolve the group they belong to
3050 if (!pGroups) LoadGroups();
3051
3052 if (!pSamples) pSamples = new SampleList;
3053
3054 RIFF::File* file = pRIFF;
3055
3056 // just for progress calculation
3057 int iSampleIndex = 0;
3058 int iTotalSamples = WavePoolCount;
3059
3060 // check if samples should be loaded from extension files
3061 int lastFileNo = 0;
3062 for (int i = 0 ; i < WavePoolCount ; i++) {
3063 if (pWavePoolTableHi[i] > lastFileNo) lastFileNo = pWavePoolTableHi[i];
3064 }
3065 String name(pRIFF->GetFileName());
3066 int nameLen = name.length();
3067 char suffix[6];
3068 if (nameLen > 4 && name.substr(nameLen - 4) == ".gig") nameLen -= 4;
3069
3070 for (int fileNo = 0 ; ; ) {
3071 RIFF::List* wvpl = file->GetSubList(LIST_TYPE_WVPL);
3072 if (wvpl) {
3073 unsigned long wvplFileOffset = wvpl->GetFilePos();
3074 RIFF::List* wave = wvpl->GetFirstSubList();
3075 while (wave) {
3076 if (wave->GetListType() == LIST_TYPE_WAVE) {
3077 // notify current progress
3078 const float subprogress = (float) iSampleIndex / (float) iTotalSamples;
3079 __notify_progress(pProgress, subprogress);
3080
3081 unsigned long waveFileOffset = wave->GetFilePos();
3082 pSamples->push_back(new Sample(this, wave, waveFileOffset - wvplFileOffset, fileNo));
3083
3084 iSampleIndex++;
3085 }
3086 wave = wvpl->GetNextSubList();
3087 }
3088
3089 if (fileNo == lastFileNo) break;
3090
3091 // open extension file (*.gx01, *.gx02, ...)
3092 fileNo++;
3093 sprintf(suffix, ".gx%02d", fileNo);
3094 name.replace(nameLen, 5, suffix);
3095 file = new RIFF::File(name);
3096 ExtensionFiles.push_back(file);
3097 } else break;
3098 }
3099
3100 __notify_progress(pProgress, 1.0); // notify done
3101 }
3102
3103 Instrument* File::GetFirstInstrument() {
3104 if (!pInstruments) LoadInstruments();
3105 if (!pInstruments) return NULL;
3106 InstrumentsIterator = pInstruments->begin();
3107 return static_cast<gig::Instrument*>( (InstrumentsIterator != pInstruments->end()) ? *InstrumentsIterator : NULL );
3108 }
3109
3110 Instrument* File::GetNextInstrument() {
3111 if (!pInstruments) return NULL;
3112 InstrumentsIterator++;
3113 return static_cast<gig::Instrument*>( (InstrumentsIterator != pInstruments->end()) ? *InstrumentsIterator : NULL );
3114 }
3115
3116 /**
3117 * Returns the instrument with the given index.
3118 *
3119 * @param index - number of the sought instrument (0..n)
3120 * @param pProgress - optional: callback function for progress notification
3121 * @returns sought instrument or NULL if there's no such instrument
3122 */
3123 Instrument* File::GetInstrument(uint index, progress_t* pProgress) {
3124 if (!pInstruments) {
3125 // TODO: hack - we simply load ALL samples here, it would have been done in the Region constructor anyway (ATM)
3126
3127 // sample loading subtask
3128 progress_t subprogress;
3129 __divide_progress(pProgress, &subprogress, 3.0f, 0.0f); // randomly schedule 33% for this subtask
3130 __notify_progress(&subprogress, 0.0f);
3131 GetFirstSample(&subprogress); // now force all samples to be loaded
3132 __notify_progress(&subprogress, 1.0f);
3133
3134 // instrument loading subtask
3135 if (pProgress && pProgress->callback) {
3136 subprogress.__range_min = subprogress.__range_max;
3137 subprogress.__range_max = pProgress->__range_max; // schedule remaining percentage for this subtask
3138 }
3139 __notify_progress(&subprogress, 0.0f);
3140 LoadInstruments(&subprogress);
3141 __notify_progress(&subprogress, 1.0f);
3142 }
3143 if (!pInstruments) return NULL;
3144 InstrumentsIterator = pInstruments->begin();
3145 for (uint i = 0; InstrumentsIterator != pInstruments->end(); i++) {
3146 if (i == index) return static_cast<gig::Instrument*>( *InstrumentsIterator );
3147 InstrumentsIterator++;
3148 }
3149 return NULL;
3150 }
3151
3152 /** @brief Add a new instrument definition.
3153 *
3154 * This will create a new Instrument object for the gig file. You have
3155 * to call Save() to make this persistent to the file.
3156 *
3157 * @returns pointer to new Instrument object
3158 */
3159 Instrument* File::AddInstrument() {
3160 if (!pInstruments) LoadInstruments();
3161 __ensureMandatoryChunksExist();
3162 RIFF::List* lstInstruments = pRIFF->GetSubList(LIST_TYPE_LINS);
3163 RIFF::List* lstInstr = lstInstruments->AddSubList(LIST_TYPE_INS);
3164
3165 // add mandatory chunks to get the chunks in right order
3166 lstInstr->AddSubList(LIST_TYPE_INFO);
3167
3168 Instrument* pInstrument = new Instrument(this, lstInstr);
3169
3170 lstInstr->AddSubChunk(CHUNK_ID_INSH, 12);
3171
3172 // this string is needed for the gig to be loadable in GSt:
3173 pInstrument->pInfo->Software = "Endless Wave";
3174
3175 pInstruments->push_back(pInstrument);
3176 return pInstrument;
3177 }
3178
3179 /** @brief Delete an instrument.
3180 *
3181 * This will delete the given Instrument object from the gig file. You
3182 * have to call Save() to make this persistent to the file.
3183 *
3184 * @param pInstrument - instrument to delete
3185 * @throws gig::Exception if given instrument could not be found
3186 */
3187 void File::DeleteInstrument(Instrument* pInstrument) {
3188 if (!pInstruments) throw gig::Exception("Could not delete instrument as there are no instruments");
3189 InstrumentList::iterator iter = find(pInstruments->begin(), pInstruments->end(), (DLS::Instrument*) pInstrument);
3190 if (iter == pInstruments->end()) throw gig::Exception("Could not delete instrument, could not find given instrument");
3191 pInstruments->erase(iter);
3192 delete pInstrument;
3193 }
3194
3195 void File::LoadInstruments() {
3196 LoadInstruments(NULL);
3197 }
3198
3199 void File::LoadInstruments(progress_t* pProgress) {
3200 if (!pInstruments) pInstruments = new InstrumentList;
3201 RIFF::List* lstInstruments = pRIFF->GetSubList(LIST_TYPE_LINS);
3202 if (lstInstruments) {
3203 int iInstrumentIndex = 0;
3204 RIFF::List* lstInstr = lstInstruments->GetFirstSubList();
3205 while (lstInstr) {
3206 if (lstInstr->GetListType() == LIST_TYPE_INS) {
3207 // notify current progress
3208 const float localProgress = (float) iInstrumentIndex / (float) Instruments;
3209 __notify_progress(pProgress, localProgress);
3210
3211 // divide local progress into subprogress for loading current Instrument
3212 progress_t subprogress;
3213 __divide_progress(pProgress, &subprogress, Instruments, iInstrumentIndex);
3214
3215 pInstruments->push_back(new Instrument(this, lstInstr, &subprogress));
3216
3217 iInstrumentIndex++;
3218 }
3219 lstInstr = lstInstruments->GetNextSubList();
3220 }
3221 __notify_progress(pProgress, 1.0); // notify done
3222 }
3223 }
3224
3225 void File::SetSampleChecksum(Sample* pSample, uint32_t crc) {
3226 RIFF::Chunk* _3crc = pRIFF->GetSubChunk(CHUNK_ID_3CRC);
3227 if (!_3crc) return;
3228 int iWaveIndex = -1;
3229 File::SampleList::iterator iter = pSamples->begin();
3230 File::SampleList::iterator end = pSamples->end();
3231 for (int index = 0; iter != end; ++iter, ++index) {
3232 if (*iter == pSample) {
3233 iWaveIndex = index;
3234 break;
3235 }
3236 }
3237 if (iWaveIndex < 0) throw gig::Exception("Could not update crc, could not find sample");
3238
3239 _3crc->SetPos(iWaveIndex * 8);
3240 uint32_t tmp = 1;
3241 _3crc->WriteUint32(&tmp); // unknown, always 1?
3242 _3crc->WriteUint32(&crc);
3243 }
3244
3245 Group* File::GetFirstGroup() {
3246 if (!pGroups) LoadGroups();
3247 // there must always be at least one group
3248 GroupsIterator = pGroups->begin();
3249 return *GroupsIterator;
3250 }
3251
3252 Group* File::GetNextGroup() {
3253 if (!pGroups) return NULL;
3254 ++GroupsIterator;
3255 return (GroupsIterator == pGroups->end()) ? NULL : *GroupsIterator;
3256 }
3257
3258 /**
3259 * Returns the group with the given index.
3260 *
3261 * @param index - number of the sought group (0..n)
3262 * @returns sought group or NULL if there's no such group
3263 */
3264 Group* File::GetGroup(uint index) {
3265 if (!pGroups) LoadGroups();
3266 GroupsIterator = pGroups->begin();
3267 for (uint i = 0; GroupsIterator != pGroups->end(); i++) {
3268 if (i == index) return *GroupsIterator;
3269 ++GroupsIterator;
3270 }
3271 return NULL;
3272 }
3273
3274 Group* File::AddGroup() {
3275 if (!pGroups) LoadGroups();
3276 // there must always be at least one group
3277 __ensureMandatoryChunksExist();
3278 Group* pGroup = new Group(this, NULL);
3279 pGroups->push_back(pGroup);
3280 return pGroup;
3281 }
3282
3283 /** @brief Delete a group and its samples.
3284 *
3285 * This will delete the given Group object and all the samples that
3286 * belong to this group from the gig file. You have to call Save() to
3287 * make this persistent to the file.
3288 *
3289 * @param pGroup - group to delete
3290 * @throws gig::Exception if given group could not be found
3291 */
3292 void File::DeleteGroup(Group* pGroup) {
3293 if (!pGroups) LoadGroups();
3294 std::list<Group*>::iterator iter = find(pGroups->begin(), pGroups->end(), pGroup);
3295 if (iter == pGroups->end()) throw gig::Exception("Could not delete group, could not find given group");
3296 if (pGroups->size() == 1) throw gig::Exception("Cannot delete group, there must be at least one default group!");
3297 // delete all members of this group
3298 for (Sample* pSample = pGroup->GetFirstSample(); pSample; pSample = pGroup->GetNextSample()) {
3299 DeleteSample(pSample);
3300 }
3301 // now delete this group object
3302 pGroups->erase(iter);
3303 delete pGroup;
3304 }
3305
3306 /** @brief Delete a group.
3307 *
3308 * This will delete the given Group object from the gig file. All the
3309 * samples that belong to this group will not be deleted, but instead
3310 * be moved to another group. You have to call Save() to make this
3311 * persistent to the file.
3312 *
3313 * @param pGroup - group to delete
3314 * @throws gig::Exception if given group could not be found
3315 */
3316 void File::DeleteGroupOnly(Group* pGroup) {
3317 if (!pGroups) LoadGroups();
3318 std::list<Group*>::iterator iter = find(pGroups->begin(), pGroups->end(), pGroup);
3319 if (iter == pGroups->end()) throw gig::Exception("Could not delete group, could not find given group");
3320 if (pGroups->size() == 1) throw gig::Exception("Cannot delete group, there must be at least one default group!");
3321 // move all members of this group to another group
3322 pGroup->MoveAll();
3323 pGroups->erase(iter);
3324 delete pGroup;
3325 }
3326
3327 void File::LoadGroups() {
3328 if (!pGroups) pGroups = new std::list<Group*>;
3329 // try to read defined groups from file
3330 RIFF::List* lst3gri = pRIFF->GetSubList(LIST_TYPE_3GRI);
3331 if (lst3gri) {
3332 RIFF::List* lst3gnl = lst3gri->GetSubList(LIST_TYPE_3GNL);
3333 if (lst3gnl) {
3334 RIFF::Chunk* ck = lst3gnl->GetFirstSubChunk();
3335 while (ck) {
3336 if (ck->GetChunkID() == CHUNK_ID_3GNM) {
3337 pGroups->push_back(new Group(this, ck));
3338 }
3339 ck = lst3gnl->GetNextSubChunk();
3340 }
3341 }
3342 }
3343 // if there were no group(s), create at least the mandatory default group
3344 if (!pGroups->size()) {
3345 Group* pGroup = new Group(this, NULL);
3346 pGroup->Name = "Default Group";
3347 pGroups->push_back(pGroup);
3348 }
3349 }
3350
3351 /**
3352 * Apply all the gig file's current instruments, samples, groups and settings
3353 * to the respective RIFF chunks. You have to call Save() to make changes
3354 * persistent.
3355 *
3356 * Usually there is absolutely no need to call this method explicitly.
3357 * It will be called automatically when File::Save() was called.
3358 *
3359 * @throws Exception - on errors
3360 */
3361 void File::UpdateChunks() {
3362 bool newFile = pRIFF->GetSubList(LIST_TYPE_INFO) == NULL;
3363
3364 // first update base class's chunks
3365 DLS::File::UpdateChunks();
3366
3367 if (newFile) {
3368 // INFO was added by Resource::UpdateChunks - make sure it
3369 // is placed first in file
3370 RIFF::Chunk* info = pRIFF->GetSubList(LIST_TYPE_INFO);
3371 RIFF::Chunk* first = pRIFF->GetFirstSubChunk();
3372 if (first != info) {
3373 pRIFF->MoveSubChunk(info, first);
3374 }
3375 }
3376
3377 // update group's chunks
3378 if (pGroups) {
3379 std::list<Group*>::iterator iter = pGroups->begin();
3380 std::list<Group*>::iterator end = pGroups->end();
3381 for (; iter != end; ++iter) {
3382 (*iter)->UpdateChunks();
3383 }
3384 }
3385
3386 // update einf chunk
3387
3388 // The einf chunk contains statistics about the gig file, such
3389 // as the number of regions and samples used by each
3390 // instrument. It is divided in equally sized parts, where the
3391 // first part contains information about the whole gig file,
3392 // and the rest of the parts map to each instrument in the
3393 // file.
3394 //
3395 // At the end of each part there is a bit map of each sample
3396 // in the file, where a set bit means that the sample is used
3397 // by the file/instrument.
3398 //
3399 // Note that there are several fields with unknown use. These
3400 // are set to zero.
3401
3402 int sublen = pSamples->size() / 8 + 49;
3403 int einfSize = (Instruments + 1) * sublen;
3404
3405 RIFF::Chunk* einf = pRIFF->GetSubChunk(CHUNK_ID_EINF);
3406 if (einf) {
3407 if (einf->GetSize() != einfSize) {
3408 einf->Resize(einfSize);
3409 memset(einf->LoadChunkData(), 0, einfSize);
3410 }
3411 } else if (newFile) {
3412 einf = pRIFF->AddSubChunk(CHUNK_ID_EINF, einfSize);
3413 }
3414 if (einf) {
3415 uint8_t* pData = (uint8_t*) einf->LoadChunkData();
3416
3417 std::map<gig::Sample*,int> sampleMap;
3418 int sampleIdx = 0;
3419 for (Sample* pSample = GetFirstSample(); pSample; pSample = GetNextSample()) {
3420 sampleMap[pSample] = sampleIdx++;
3421 }
3422
3423 int totnbusedsamples = 0;
3424 int totnbusedchannels = 0;
3425 int totnbregions = 0;
3426 int totnbdimregions = 0;
3427 int instrumentIdx = 0;
3428
3429 memset(&pData[48], 0, sublen - 48);
3430
3431 for (Instrument* instrument = GetFirstInstrument() ; instrument ;
3432 instrument = GetNextInstrument()) {
3433 int nbusedsamples = 0;
3434 int nbusedchannels = 0;
3435 int nbdimregions = 0;
3436
3437 memset(&pData[(instrumentIdx + 1) * sublen + 48], 0, sublen - 48);
3438
3439 for (Region* region = instrument->GetFirstRegion() ; region ;
3440 region = instrument->GetNextRegion()) {
3441 for (int i = 0 ; i < region->DimensionRegions ; i++) {
3442 gig::DimensionRegion *d = region->pDimensionRegions[i];
3443 if (d->pSample) {
3444 int sampleIdx = sampleMap[d->pSample];
3445 int byte = 48 + sampleIdx / 8;
3446 int bit = 1 << (sampleIdx & 7);
3447 if ((pData[(instrumentIdx + 1) * sublen + byte] & bit) == 0) {
3448 pData[(instrumentIdx + 1) * sublen + byte] |= bit;
3449 nbusedsamples++;
3450 nbusedchannels += d->pSample->Channels;
3451
3452 if ((pData[byte] & bit) == 0) {
3453 pData[byte] |= bit;
3454 totnbusedsamples++;
3455 totnbusedchannels += d->pSample->Channels;
3456 }
3457 }
3458 }
3459 }
3460 nbdimregions += region->DimensionRegions;
3461 }
3462 // first 4 bytes unknown - sometimes 0, sometimes length of einf part
3463 // store32(&pData[(instrumentIdx + 1) * sublen], sublen);
3464 store32(&pData[(instrumentIdx + 1) * sublen + 4], nbusedchannels);
3465 store32(&pData[(instrumentIdx + 1) * sublen + 8], nbusedsamples);
3466 store32(&pData[(instrumentIdx + 1) * sublen + 12], 1);
3467 store32(&pData[(instrumentIdx + 1) * sublen + 16], instrument->Regions);
3468 store32(&pData[(instrumentIdx + 1) * sublen + 20], nbdimregions);
3469 // next 12 bytes unknown
3470 store32(&pData[(instrumentIdx + 1) * sublen + 36], instrumentIdx);
3471 store32(&pData[(instrumentIdx + 1) * sublen + 40], pSamples->size());
3472 // next 4 bytes unknown
3473
3474 totnbregions += instrument->Regions;
3475 totnbdimregions += nbdimregions;
3476 instrumentIdx++;
3477 }
3478 // first 4 bytes unknown - sometimes 0, sometimes length of einf part
3479 // store32(&pData[0], sublen);
3480 store32(&pData[4], totnbusedchannels);
3481 store32(&pData[8], totnbusedsamples);
3482 store32(&pData[12], Instruments);
3483 store32(&pData[16], totnbregions);
3484 store32(&pData[20], totnbdimregions);
3485 // next 12 bytes unknown
3486 // next 4 bytes unknown, always 0?
3487 store32(&pData[40], pSamples->size());
3488 // next 4 bytes unknown
3489 }
3490
3491 // update 3crc chunk
3492
3493 // The 3crc chunk contains CRC-32 checksums for the
3494 // samples. The actual checksum values will be filled in
3495 // later, by Sample::Write.
3496
3497 RIFF::Chunk* _3crc = pRIFF->GetSubChunk(CHUNK_ID_3CRC);
3498 if (_3crc) {
3499 _3crc->Resize(pSamples->size() * 8);
3500 } else if (newFile) {
3501 _3crc = pRIFF->AddSubChunk(CHUNK_ID_3CRC, pSamples->size() * 8);
3502 _3crc->LoadChunkData();
3503 }
3504 }
3505
3506
3507
3508 // *************** Exception ***************
3509 // *
3510
3511 Exception::Exception(String Message) : DLS::Exception(Message) {
3512 }
3513
3514 void Exception::PrintMessage() {
3515 std::cout << "gig::Exception: " << Message << std::endl;
3516 }
3517
3518
3519 // *************** functions ***************
3520 // *
3521
3522 /**
3523 * Returns the name of this C++ library. This is usually "libgig" of
3524 * course. This call is equivalent to RIFF::libraryName() and
3525 * DLS::libraryName().
3526 */
3527 String libraryName() {
3528 return PACKAGE;
3529 }
3530
3531 /**
3532 * Returns version of this C++ library. This call is equivalent to
3533 * RIFF::libraryVersion() and DLS::libraryVersion().
3534 */
3535 String libraryVersion() {
3536 return VERSION;
3537 }
3538
3539 } // namespace gig

  ViewVC Help
Powered by ViewVC