/[svn]/linuxsampler/trunk/ChangeLog
ViewVC logotype

Diff of /linuxsampler/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 3100 by schoenebeck, Sat Feb 4 16:53:20 2017 UTC revision 3448 by schoenebeck, Sun Dec 23 22:10:56 2018 UTC
# Line 1  Line 1 
1  Version SVN trunk (?)  Version SVN trunk (?)
2    
3      * Real-time instrument scripts:
4        - Fixed behavior of built-in NKSP functions change_sustain(),
5          change_cutoff_attack(), change_cutoff_decay(), change_cutoff_sustain()
6          and change_cutoff_release().
7    
8      * general changes:
9        - Only play release trigger samples on sustain pedal up if this behaviour
10          was explicitly requested by the instrument (otherwise only on note-off).
11    
12      * Gigasampler/GigaStudio format engine:
13        - Format extension: If requested by instrument then don't play release
14          trigger sample on note-off events.
15    
16    Version 2.1.0 (25 Nov 2017)
17    
18    * SFZ format engine:    * SFZ format engine:
19      - added support for <global>, <master> and #define (patch by Alby M)      - added support for <global>, <master> and #define (patch by Alby M)
20      - Removed code duplication in SFZ file loading code.      - Removed code duplication in SFZ file loading code.
# Line 7  Version SVN trunk (?) Line 22  Version SVN trunk (?)
22        load real-time instrument script file (NKSP script language).        load real-time instrument script file (NKSP script language).
23      - Implemented opcode set_ccN (initial patch by Giovanni Senatore).      - Implemented opcode set_ccN (initial patch by Giovanni Senatore).
24      - Fixed unintended volume fade-in of voices under certain conditions.      - Fixed unintended volume fade-in of voices under certain conditions.
25        - sfz parser: allow missing space between header and opcode
26    
27    * Gigasampler format engine:    * Gigasampler/GigaStudio format engine:
28      - Fixed clicks and pumping noise with Lowpass Turbo filter on very low      - Fixed clicks and pumping noise with Lowpass Turbo filter on very low
29        cutoff settings.        cutoff settings.
30        - Got rid of resembling an ancient GSt misbehavior which did not pitch at
31          all if an up-pitch of more than 40 semi tones was requested (I don't
32          think there is any stock gig sound that requires this behavior to
33          resemble its original sound).
34        - Added support for controlling whether the individual EGADSR stages may
35          be aborted (as LinuxSampler extension to the original GigaStudio 4
36          format).
37    
38    * general changes:    * general changes:
39      - fixed printf type errors (mostly in debug messages)      - fixed printf type errors (mostly in debug messages)
# Line 43  Version SVN trunk (?) Line 66  Version SVN trunk (?)
66      - windows, 32-bit: fixed potential crashes by making sure the stack in      - windows, 32-bit: fixed potential crashes by making sure the stack in
67        sub threads is 16-byte aligned        sub threads is 16-byte aligned
68      - fixed numerous compiler warnings      - fixed numerous compiler warnings
69        - Fixed invalid (note-on) event ID being assigned to new Note objects.
70        - Revised fundamental C++ classes "Thread", "Mutex" and "Condition" which
71          fixes potential undefined behavior.
72        - Fixed Note object leak when triggering notes on keys which did not
73          have a valid sample mapped (fixes bug #252).
74        - Fixed compilation errors when compiling with CONFIG_DEVMODE enabled.
75        - linuxsampler binary fix: option --create-instruments-db ignored
76          subsequent optional argument due to glibc's implementation oddity
77          which expects a "=" sign, but no space between them.
78    
79    * packaging changes:    * packaging changes:
80      - removed unnecessary dependency to libuuid      - removed unnecessary dependency to libuuid
81        (originated by libgig's usage of it)        (originated by libgig's usage of it)
82      - Automake: set environment variable GCC_COLORS=auto to allow GCC to      - Automake: set environment variable GCC_COLORS=auto to allow GCC to
83        auto detect whether it (sh/c)ould output its messages in color.        auto detect whether it (sh/c)ould output its messages in color.
84        - Debian: Fixed packaging error about invalid "Source-Version"
85          substitution variable.
86        - Debian: Raised Debian compatibility level to Debian 9 "Stretch".
87        - Debian: Added build dependency to libsqlite3-dev for building
88          linuxsampler with instruments DB support.
89    
90    * Real-time instrument scripts:    * Real-time instrument scripts:
91      - Implemented scheduler for delayed MIDI events and for suspended scripts.      - Implemented scheduler for delayed MIDI events and for suspended scripts.
# Line 143  Version SVN trunk (?) Line 180  Version SVN trunk (?)
180        initializer list to an array variable.        initializer list to an array variable.
181      - Implemented built-in script array variable "%ALL_EVENTS".      - Implemented built-in script array variable "%ALL_EVENTS".
182      - Implemented built-in script function "in_range()".      - Implemented built-in script function "in_range()".
183        - Implemented built-in script function "change_amp_lfo_depth()".
184        - Implemented built-in script function "change_amp_lfo_freq()".
185        - Implemented built-in script function "change_pitch_lfo_depth()".
186        - Implemented built-in script function "change_pitch_lfo_freq()".
187        - Implemented built-in script function "change_vol_time()".
188        - Implemented built-in script function "change_tune_time()".
189        - Implemented built-in script function "fade_in()".
190        - Implemented built-in script function "fade_out()".
191        - Fixed acceptance of wrong data type of parameters passed to built-in
192          script functions "change_vol()", "change_tune()", "change_pan()",
193          "change_cutoff()", "change_reso()", "change_attack()", "change_decay()",
194          "change_release()", "change_amp_lfo_depth()", "change_amp_lfo_freq()",
195          "change_pitch_lfo_depth()" and "change_pitch_lfo_freq()".
196        - Added built-in script function "get_event_par()" and implemented some
197          of its possible parameter selections.
198        - Added built-in script function "set_event_par()" and implemented some
199          of its possible parameter selections.
200        - Fixed a bunch of scheduler time related bugs.
201        - Fixed polyphonic variables not being reset to zero after usage.
202        - Built-in "ignore_event()" function: argument is now optional, like with
203          built-in function "ignore_controller()".
204        - Implemented built-in script function "change_velo()".
205        - Implemented built-in script function "change_note()".
206        - Adjusted behavior of "change_vol()" and "change_tune()" to a more
207          intuitive behavior if used in combination with "change_vol_time()" or
208          "change_tune_time()" respectively: now tuning/volume changes are only
209          assigned (without delay) immediately to a new note if the respective
210          timing function has not been called before, otherwise the volume/tuning
211          changes are automatically faded (before, only the event's time stamp was
212          relevant).
213         - Implemented built-in script function "array_equal()".
214         - Implemented built-in script function "search()".
215         - Implemented built-in script function "sort()".
216         - NKSP Fix: Never suspend "init" event handlers.
217         - Implemented built-in script function "same_region()" (currently only
218           available for gig format engine).
219         - Added built-in script constant "$NKSP_LINEAR".
220         - Added built-in script constant "$NKSP_EASE_IN_EASE_OUT".
221         - Implemented built-in script function "change_vol_curve()".
222         - Implemented built-in script function "change_tune_curve()".
223         - built-in "play_note()" function now supports a sample playback start
224           offset with argument 3, where special value -1 means to use the regular
225           sample offset as defined by the instrument file.
226         - Built-in array variable %KEY_DOWN[] is now a read-only variable.
227         - Built-in variable $EVENT_NOTE is now a read-only variable.
228         - Built-in variable $EVENT_VELOCITY is now a read-only variable.
229         - built-in "play_note()" function now accepts -2 for its fourth argument
230           (note duration) which means the life time of the note shall be sticked
231           to the requested note number of argument 1.
232         - Fix: built-in "play_note()" function now returns 0 as result value if
233           -1 was passed for its fourth argument (note duration) and the respective
234           parent note is already gone.
235        - Implemented built-in script function "change_play_pos()".
236        - NKSP language: Added support for user declared const array variables.
237        - NKSP language: Raise parser warning if array variable is accessed with
238          an index that exceeds the array's size.
239        - NKSP language fix: Unknown characters were not handled correctly.
240        - NKSP language: Added support for "synchronized .. end synchronized"
241          code blocks.
242        - Implemented built-in script function "abort()" which allows to abort
243          another script handler by passing its callback ID.
244        - Fixed potential memory access bug and potential undefined behavior of
245          "init" event handlers.
246        - Print a time stamp along to each call of built-in function "message()".
247        - ScriptVM API: Added VMParserContext::preprocessorComments() which allows
248          to retrieve all code blocks filtered out by the preprocessor.
249        - Added built-in script function "fork()".
250        - Added built-in array variable %NKSP_CALLBACK_CHILD_ID[].
251        - Added built-in variable $NKSP_CALLBACK_PARENT_ID.
252        - Fixed potential crash when accessing dynamic built-in array variables.
253        - Added built-in script function "callback_status()".
254        - Added built-in constant $CALLBACK_STATUS_TERMINATED.
255        - Added built-in constant $CALLBACK_STATUS_QUEUE.
256        - Added built-in constant $CALLBACK_STATUS_RUNNING.
257        - Removed max. value limitation of built-in functions "change_attack()",
258          "change_decay()" and "change_release()" to i.e. allow passing 2000000
259          for doubling the respective time.
260        - NKSP script editor syntax highlighting API: Fixed app termination due
261          to a lexer start condition stack underrun.
262        - NKSP preprocessor: Fixed wrong behavior on nested USE_CODE_IF() and
263          USE_CODE_IF_NOT() preprocessor statements.
264        - NKSP: Added built-in preprocessor condition NKSP_NO_MESSAGE, which
265          can be set to disable all subsequent built-in "message()" function calls
266          on preprocessor level.
267        - Implemented built-in script function "change_sustain()".
268        - NKSP script editor syntax highlighting API: catch all fatal lexer errors,
269          to avoid the editor app to crash on ill-formed text input.
270        - Added built-in script function "change_pan_time()".
271        - Added built-in script function "change_pan_curve()".
272        - Added built-in script function "change_cutoff_attack()".
273        - Added built-in script function "change_cutoff_decay()".
274        - Added built-in script function "change_cutoff_sustain()".
275        - Added built-in script function "change_cutoff_release()".
276        - Added built-in script function "change_cutoff_lfo_depth()".
277        - Added built-in script function "change_cutoff_lfo_freq()".
278    
279    * Instruments DB:    * Instruments DB:
280      - Fixed memory access bug of general DB access code which lead to      - Fixed memory access bug of general DB access code which lead to
# Line 152  Version SVN trunk (?) Line 284  Version SVN trunk (?)
284        is now optional, if it is missing, then a default location is used.        is now optional, if it is missing, then a default location is used.
285      - Added support for scanning SFZ (.sfz) files.      - Added support for scanning SFZ (.sfz) files.
286      - Added support for scanning Sound Font (.sf2) files.      - Added support for scanning Sound Font (.sf2) files.
287        - Fixed undefined DB transaction behavior.
288    
289  Version 2.0.0 (15 July 2015)  Version 2.0.0 (15 July 2015)
290    
# Line 626  Version 2.0.0 (15 July 2015) Line 759  Version 2.0.0 (15 July 2015)
759        $GIG_DIM_EFFECT3DEPTH, $GIG_DIM_EFFECT4DEPTH, $GIG_DIM_EFFECT5DEPTH.        $GIG_DIM_EFFECT3DEPTH, $GIG_DIM_EFFECT4DEPTH, $GIG_DIM_EFFECT5DEPTH.
760      - Giga format scripts: Implemented built-in script function      - Giga format scripts: Implemented built-in script function
761        "gig_set_dim_zone(event_id, dimension, zone)".        "gig_set_dim_zone(event_id, dimension, zone)".
762      - Implemented built-in script int array variable $KEY_DOWN.      - Implemented built-in script int array variable %KEY_DOWN.
763      - Implemented built-in script function "abs()".      - Implemented built-in script function "abs()".
764      - Implemented built-in script function "random()".      - Implemented built-in script function "random()".
765      - Implemented built-in script function "num_elements()".      - Implemented built-in script function "num_elements()".
Legend:
Removed from v.3100  
changed lines
  Added in v.3448
  ViewVC Help
Powered by ViewVC