/[svn]/linuxsampler/trunk/ChangeLog
ViewVC logotype

Diff of /linuxsampler/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 579 by schoenebeck, Tue May 24 19:20:20 2005 UTC revision 1298 by iliev, Fri Aug 17 12:55:37 2007 UTC
# Line 1  Line 1 
1    Version CVS HEAD (?)
2    
3      * packaging changes:
4        - config.h is not going to be installed along with liblinuxsampler's
5          API header files anymore
6        - only the API relevant header (and source) files will be exported to
7          the Doxygen API documentation (explicitly listed in Doxyfile.in)
8        - added completely new XCode project files for Mac OSX which is now
9          capable to execute our autoconf environment, thus no need anymore
10          to maintain the compile time configuration file (osx/version.h) for
11          OSX manually (patch by Toshi Nagata)
12    
13      * general changes:
14        - replaced the old, confusing MIDI program change mechanism by a
15          flexible MIDI instrument mapper which allows to map arbitrary
16          (MIDI bank, MIDI program) pairs with arbitrary
17          (engine type, instrument file, file index) triplets which will be
18          loaded on the respective channel when such MIDI program change
19          messages arrive, beside that, each entry allows to define a life-time
20          strategy for the instrument, so the user can define whether the
21          instrument should i.e. be permanently loaded (to be able to switch
22          quickly among sounds) or i.e. loaded just on demand when the
23          respective program change arrives (to safe RAM space), as well as a
24          global volume factor for each entry, so the user can adjust the volume
25          dynamic of his mapped instrument collection without having to modify
26          the instrument files, also one can manage arbitrary amount of such
27          MIDI instrument maps and assign each sampler channel individually
28          a certain map, so that i.e. separation of normal instruments and
29          drumkits is possible
30        - new notification events for tracking changes to audio/MIDI devices,
31          MIDI instrument maps, MIDI instruments, FX sends, global volume.
32        - sampler was limited to load max. 200 instruments in the background
33          due to a constant size RingBuffer FIFO which is now replaced by a
34          dynamic (unlimited) size std::list FIFO
35        - added FX sends, these allow to route audio signals to arbitrary audio
36          output channels for being processed by external effect processors
37          (i.e. jack-rack), the send levels are controllable via arbitrary MIDI
38          controllers
39        - global (sampler wide) volume can now be controlled at runtime
40        - Implemented new, improved notification system
41        - fixed compilation errors regarding OSX
42          (patch by Toshi Nagata)
43        - implemented instruments database
44        - added highly experimental support for on-the-fly instrument editing
45          within the sampler's process (by using instrument editor plugins),
46          you'll notice the new "Registered instrument editors:" message on
47          startup, added a new LSCP command "EDIT INSTRUMENT <sampler-channel>"
48          to spawn a matching instrument editor for the instrument on the
49          given sampler channel, the plugin path can be overridden at compile
50          time with ./configure --enable-plugin-dir=/some/dir
51        - fixed several issues in fundamental "Thread" class: set scheduling
52          policy and priority on thread level, set a minimum stack size for
53          thread (TODO: a reasonable value yet to be tested), bugfix: non-RT
54          threads simply inherited properties of starting thread instead of
55          setting their own policy and priority
56        - minor fix in our automatic stack trace mechanism on crashes, the
57          main process did not wait for the stack trace process to finish
58          its output
59        - fixed some minor memory leaks
60        - reenabled assembly features support, at the moment only for
61          enabling a fast denormal FPU mode (x86 platforms supporting SSE2)
62    
63      * MIDI driver:
64        - dispatch bank select (MSB and LSB) messages
65    
66      * audio driver:
67        - the ALSA audio output driver parameters now reflect the correct
68          parameter value ranges for the respective selected sound card
69          (patch by Till Wimmer, a bit fixed and extended)
70    
71      * Gigasampler format engine:
72        - if a filter is used and EG2 finishes before EG1, let the voice
73          die when EG2 has finished (this fixes a problem with clicks and
74          voice starvation for some gigs)
75        - playback is no longer disabled during instrument loading
76        - all notes playing on a channel that changes its instrument keep
77          playing with the old instrument until they get a note off
78          command
79        - EG fix: a release value of zero could cause noises or crash
80        - handle MIDI coarse tuning messages (MIDI RPN #0 MSB #2 LSB)
81        - EG fine tuning: when attack is zero the EG starts at a level
82          above max sustain level, which means that there is a decay phase
83          even if sustain is 100%
84        - more EG fixes: the level could sometimes go below zero and cause
85          noises or crashes
86        - minor fix of EGDecay (patch by Toshi Nagata)
87        - fixed compiler error when --enable-override-filter-type was
88          supplied to the configure script (fixes #46)
89    
90      * LSCP server:
91        - fixed compile time error for old Bison versions
92          (i.e. v1.28 found on MacOS 10.4, patch by Toshi Nagata)
93        - parser now supports extended ASCII character set
94          (up to ASCII code 255, i.e. includes now umlauts and accents)
95        - filename arguments in LSCP commands now allow to use escape
96          sequences, that is directly literal as one of: \', \", \\, \n, \r,
97          \f, \t, \v, or as octal ASCII code value like \132, or as hex ASCII
98          code value like \xf2) (fixes bug #24)
99        - returns verbose syntax errors (line and column where syntax error
100          occured, the unexpected character and the actually expected, possible
101          character(s), the latter only if less than 5 possibilities)
102    
103      * Bug fixes:
104        - fixed crash occurring on certain LSCP scripts (Bug 39)
105        - another thread safety fix for lscp "load engine" and "set
106          channel audio output device"
107        - fixed a crash which occurs when reassigning the same engine
108          on a sampler channel with connected MIDI device
109        - fixed a crash which occurs when changing the number of ports of a MIDI
110          device connected to a sampler channel to number less then or equal
111          to the index of the port to which the sampler channel is connected.
112        - The previous bindings were not been disconnected when altering
113          the ALSA_SEQ_BINDINGS parameter. Introduced a NONE keyword for
114          unsubscribing from all bindings (e.g. ALSA_SEQ_BINDINGS=NONE).
115        - The active stream/voice count statistic was incorrect.
116        - notification events were not been sent for some sampler
117          channel changes
118    
119      * test cases:
120        - updated and fixed (haven't been touched in a while)
121    
122    Version 0.4.0 (24 November 2006)
123    
124      * packaging changes:
125        - changed deprecated copyright attribute to license; added ldconfig
126          to post-(un)install steps; added devel package for liblinuxsampler;
127          to linuxsampler.spec (RPM)
128        - install necessary development header files for allowing 3rd party
129          applications to link against liblinuxsampler
130        - liblinuxsampler's API documentation can be generated with 'make docs'
131          (Doxygen required)
132        - added benchmark to automatically detect the best triangle LFO
133          implementation (currently either an integer math solution or a
134          di-harmonic approximation), automatic detection can be overriden
135          with --enable-signed-triang-algo=x and --enable-unsigned-triang-algo=x
136          configure script argument though (mandatory for cross-compilation)
137        - do not automatically pick optimized gcc flags if the user already
138          provided some on his own (as CXXFLAGS)
139        - added compile time option to disable processing of All-Notes-Off MIDI
140          messages
141        - added compile time options to allow disabling the various audio and
142          MIDI drivers
143        - fixed automatic GCC CPU switch detection on PPC
144          (patch by Ebrahim Mayat)
145    
146      * Gigasampler format engine:
147        - extensive synthesis optimization
148          (reimplementation of EGs and LFO(s), removed synthesis parameter
149          prerendering and the synthesis parameter matrix in general, splitting
150          each audio fragment into subfragments now where each subfragment uses
151          constant pitch and filter coefficients. The volume coefficient is
152          linearly interpolated inside a subfragment, unless
153          --disable-interpolate-volume is set.)
154        - fine tuning of the EG modulation parameters
155        - improved filter cutoff calculation by adding support for the
156          following gig parameters: Cutoff freq (used when no cutoff
157          controller is defined), Control invert, Minimum cutoff, Velocity
158          curve and Velocity range. The keyboard tracking now scales
159          cutoff frequency instead of resonance.
160        - added support for gig parameter Resonance.
161        - fixed bug in sysex handling (patch by Juan Linietsky)
162        - added global volume attenuation of -9 dB (0.35f) to prevent clipping
163          which can be overridden with --enable-global-attenuation
164        - EG fixes: made the length of "attack hold" stage more
165          accurate. Release stage can now start before attack stage
166          ends. Cancel release didn't work when sustain was zero. Attack
167          time now has a minimal value to prevent clicks.
168        - fixed pitch changes larger than one octave
169        - fixed EG3 (pitch envelope) synthesis which was neutral all the time
170        - implemented portamento mode and solo mode (a.k.a 'mono mode'):
171          all modes can be altered via standard GM messages, that is CC5 for
172          altering portamento time, CC65 for enabling / disabling portamento
173          mode, CC126 for enabling solo mode and CC127 for disabling solo mode
174        - fine tuning of the curves for volume (CC7), pan (CC10 and gig
175          parameter) and crossfade
176        - added support for the "attenuation controller threshold" gig
177          parameter
178        - added smoothing of volume changes caused by control change
179          messages
180        - sample loop parameters are now taken from the DimensionRegion
181          instead of the wave chunk
182        - fixed keyswitching for v3 gigs with a number of keyswitch splits
183          not equal to a power of two
184        - reimplementation of the filter algorithm. The new filter is more
185          accurate and supports all gig filter types, including bandreject
186          and lowpass turbo.
187        - real support for 24 bit samples - samples are not truncated to
188          16 bits anymore
189        - support for aftertouch (channel pressure, not polyphonic
190          aftertouch)
191        - LFO1 behaviour fixed (dampening from max volume instead of
192          amplifying from 0)
193    
194      * LSCP server:
195        - fixed application exit on broken pipe error (fixes bug #20)
196        - fixed the notification messages delay due to lack of
197          network activity (fixes bug #26)
198        - fixed parser bug which occured on space(s) within device parameters
199          (e.g. "SET AUDIO_OUTPUT_CHANNEL_PARAMETER 0 0 SOMEPARAM='foo bar'")
200    
201      * audio driver:
202        - added aRts audio output driver (by no means RT safe)
203    
204      * MIDI driver:
205        - fixed legacy sysex code which caused dispatching of MIDI SysEx
206          messages several times instead of once
207        - API extension for MIDI drivers which already supply exact time stamps
208          for events (i.e. for offline rendering based MIDI drivers)
209        - added checks for bad MIDI data
210    
211      * linuxsampler application:
212        - show available sampler engine types on startup
213    
214      * general changes:
215        - support for muting sampler channels and solo mode of the same, two new
216          LSCP commands ("SET CHANNEL MUTE" and "SET CHANNEL SOLO") and two new
217          fields ("MUTE" and "SOLO") for command "GET CHANNEL INFO" were
218          introduced for this, the behavior is the same like on a mixer console
219          (patch by Grigor Iliev, a bit adjusted). Also added configure option
220          --enable-process-muted-channels which can be used to enable the
221          processing of muted channels.
222        - support for sostenuto pedal
223        - support for monitoring the total number of active voices
224          (new LSCP commands: GET TOTAL_VOICE_COUNT, GET TOTAL_VOICE_COUNT_MAX,
225          SUBSCRIBE TOTAL_VOICE_COUNT, UNSUBSCRIBE TOTAL_VOICE_COUNT)
226        - fixed some memory management errors
227        - fixed some concurrency problems that could lead to crashes when
228          LSCP commands were executed
229        - fixed crash when instrument loading failed previously on the same
230          sampler channel (fixes bug #36)
231    
232    Version 0.3.3 (15 July 2005)
233    
234      * packaging changes:
235        - fixed compilation with gcc 4.0
236    
237      * Gigasampler format engine:
238        - LFO preprocessing was performed even though the respective LFO was
239          disabled by the instrument patch (minor efficiency fix)
240        - if period time of chosen audio device is too small (< MIN_RELEASE_TIME)
241          for volume ramp downs in the same fragment (needed for current voice
242          stealing implementation) then simply inform the user with a warning
243          about possible click sounds and reduce the volume ramp down
244          appropriately instead of cancelling the audio device connection
245    
246    Version 0.3.2 (24 June 2005)
247    
248      * packaging changes:
249        - updated autotools build files to compile on OS X
250          (conditional compilation of CoreMIDI and MidiShare drivers)
251        - hand-crafted assembly optimization code can be disabled with
252          './configure --disable-asm' (definitely not recommended)
253        - fixed 'make dist' rule to include all necessary files
254        - require automake (>= 1.5) for 'make -f Makefile.cvs'
255          (due to 'dist-bzip2' automake option)
256    
257      * Gigasampler format engine:
258        - support for the gig parameters for "release velocity response" curves
259        - fine tuning of the EGADSR envelope
260        - volume of release triggered samples now depends on note-on velocity,
261          note length and gig parameter "release trigger decay" instead of
262          note-off velocity.
263        - revised voice stealing
264          (fixes crash and endless loop caused by voice stealing)
265        - don't reset scale tuning on instrument or audio output device change
266        - handle key group conflicts right at the beginning of each fragment
267          instead of when the respective voice is actually launched
268          (fixes undefined behavior if stolen voices belonged to a key group -
269          this case was followed by a "killed voice survived" error message)
270        - fixed minor issue with null/silence samples
271          (those stole voices even though they don't need a voice at all which
272          resulted in "voice stealing didn't work out" messages)
273        - don't reset volume, pan, pitch and MIDI controller values on
274          instrument or audio output device change
275    
276      * LSCP server:
277        - fixed some crashes (patch by Grigor Iliev, fixes #19)
278        - fixed LSCP event "CHANNEL_INFO" notification
279          (e.g. did not notify on volume changes or MIDI program change events)
280    
281      * linuxsampler application:
282        - added command line parameters --lscp-addr and --lscp-port to override
283          default IP address and port of LSCP server
284    
285  Version 0.3.1 (24 May 2005)  Version 0.3.1 (24 May 2005)
286    
287    * initial release    * initial release

Legend:
Removed from v.579  
changed lines
  Added in v.1298

  ViewVC Help
Powered by ViewVC