/[svn]/linuxsampler/trunk/ChangeLog
ViewVC logotype

Contents of /linuxsampler/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 2311 - (show annotations) (download)
Sat Feb 11 11:08:09 2012 UTC (7 years, 8 months ago) by persson
File size: 47198 byte(s)
* more LV2 "state" extension support fixes (patch by David Robillard)
* sfz parser: allow double spaces in sample filenames
* sfz parser: allow absolute paths for sample filenames
* MME driver: fixed memory handling bug found with cppcheck
* sfz/sf2 engines: use linear decay and release for filter and pitch
  envelope generators

1 Version CVS HEAD (?)
2
3 * plugin changes:
4 - LV2 "state" extension support (patch by David Robillard)
5
6 * packaging changes:
7 - fixed building with newer MinGW-w64
8 - Mac OS X: support the new dir for Core Audio SDK
9 - Mac OS X: fixed building outside source directory
10 - made sure all source files for hostplugins are included when
11 doing "make dist"
12 - removed empty directories left from the cvs to svn migration
13 - fixed compilation with gcc 4.6.1
14 - another "make dist" fix, for the LV2 plugin
15 - made --enable-pthread-testcancel default on Mac OS X
16 - minor Makefile fix for building lscpparser when build and source
17 directories are separate
18 - Mac OS X: made it possible to specify plugin installation dir to
19 configure
20 - Mac OS X: Makefile fix for the install-strip target
21
22 * general changes:
23 - Refactoring: moved the independent code from
24 the Gigasampler format engine to base classes
25 - command line option '--profile' is currently disabled, since the
26 respective profiling code is currently broken
27 - Introduced support for optional environment variable
28 "LINUXSAMPLER_PLUGIN_DIR" which allows to override the directory
29 where the sampler shall look for instrument editor plugins
30 (patch by Luis Garrido, slightly modified).
31 - implemented Roland GS NRPN 1ArrH which allows to set volume per note
32 - implemented Roland GS NRPN 1CrrH which allows to set pan per note
33 - implemented Roland GS NRPN 1DrrH which allows to set reverb send per
34 note (in this implementation of the sampler its simply hard routed to
35 the 1st effect send of the sampler channel, no matter what the actual
36 effect type is)
37 - implemented Roland GS NRPN 1ErrH which allows to set chorus send per
38 note (in this implementation of the sampler its simply hard routed to
39 the 2nd effect send of the sampler channel, no matter what the actual
40 effect type is)
41 - implemented support for internal LADSPA effects
42 - raised limit of program change queue from 100 to 512
43 (as suggested by Alex Stone)
44 - implemented sine LFO, pulse LFO and saw LFO
45 - experimental support for per voice equalization
46 - added command line option --exec-after-init
47
48 * Gigasampler format engine:
49 - implemented the "round robin keyboard" dimension
50 - fixed round robin and random dimensions for cases when number of
51 dimension zones is not a power of two
52 - made round robin use a counter for each region instead of each
53 key
54
55 * SFZ format engine:
56 - Initial implementation (not usable yet)
57 - added support for v2 multiple stage envelope generators
58 - added a fine-tuned v1 envelope generator instead of using the
59 one from the gig engine
60 - fixed memory leak and memory handling errors
61 - added support for trigger=first, trigger=legato and sw_previous
62 - allow non-numerical key values ("C#4" for example)
63 - "key" opcode now sets pitch_keycenter too
64 - fixed error when unloading instrument with same sample used by
65 multiple regions
66 - added some opcode aliases, like loopmode for loop_mode, to be
67 more compatible
68 - added support for trigger=release and rt_decay
69 - added support for off_mode=normal
70 - added support for random, seq_position, seq_length and volume
71 - added v1 LFO opcodes to parser (no support in engine yet)
72 - added support for amp_veltrack and amp_velcurve_N
73 - fine-tuned the default velocity curve
74 - added support for transpose
75 - fixed crash when using sw_down/up
76 - improved logic for sw_lokey/hikey/up/down/last
77 - added more v1 aliases to parser
78 - reduced memory usage for sfz data
79 - RT-safeness: avoid malloc in audio thread
80 - fixed a bug that could cause voice stealing to fail
81 - optimized sample lookup
82 - improved support for exclusive groups (group, off_by and
83 off_mode)
84 - added support for controller triggered regions (on_locc/on_hicc)
85 - added support for loop_mode=one_shot
86 - fixed playback of 16 bit wav files on big endian CPUs
87 - added support for Ogg Vorbis sample files
88 - use loop markers from sample file if loop_start and loop_end are
89 not set in sfz file
90 - implemeted filters. Filter types: lowpass, bandpass, bandreject
91 and highpass. 1, 2, 4 and 6 pole filters. Opcodes: fil_type,
92 cutoff, resonance, fil_veltrack, fil_keytrack, fil_keycenter,
93 cutoff_cc, cutoff_chanaft.
94 - bugfix: zero ampeg_sustain didn't work
95 - added support for velocity effect on amplifier envelope time
96 (ampeg_vel2attack, ampeg_vel2decay, ampeg_vel2sustain and
97 ampeg_vel2release)
98 - added support for EG hold (ampeg_hold)
99 - added support for sample offset (offset)
100 - use the newly introduced signal units model
101 - implemented opcodes lfoN_delay,
102 lfoN_freq, lfoN_pan, lfoN_cutoff, lfoN_resonance
103 - implemented opcodes ampeg_delay, ampeg_vel2delay
104 pitcheg_delay, pitcheg_start, pitcheg_attack, pitcheg_hold,
105 pitcheg_decay, pitcheg_sustain, pitcheg_release, pitcheg_vel2delay,
106 pitcheg_vel2attack, pitcheg_vel2hold, pitcheg_vel2decay,
107 pitcheg_vel2sustain, pitcheg_vel2release, pitcheg_depth
108 - implemented opcodes pitchlfo_delay, pitchlfo_freq,
109 pitchlfo_depth, fillfo_delay, fillfo_freq, fillfo_depth,
110 amplfo_delay, amplfo_freq, amplfo_depth
111 - implemented opcodes fileg_delay, fileg_start, fileg_attack,
112 fileg_hold, fileg_decay, fileg_sustain, fileg_release, fileg_vel2delay,
113 fileg_vel2attack, fileg_vel2hold, fileg_vel2decay, fileg_vel2sustain,
114 fileg_vel2release
115 - implemented opcode lfoN_wave
116 - implemented opcode pitchlfo_depthccN
117 - implemented opcodes lfoN_phase, lfoN_phase_onccX,
118 lfoN_pitch, lfoN_pitch_onccX
119 - implemented opcodes pitchlfo_fade,
120 fillfo_fade, amplfo_fade, lfoN_fade, lfoN_fade_onccX
121 - implemented opcodes fillfo_freqccN,
122 pitchlfo_freqccN, amplfo_freqccN, lfoN_freq_onccX
123 - implemented opcodes ampeg_delayccN, ampeg_startccN,
124 ampeg_attackccN, ampeg_holdccN, ampeg_decayccN, ampeg_sustainccN,
125 ampeg_releaseccN, egN_timeX_onccY, egN_levelX_onccY
126 - lfoN_* and egN_* opcodes defined in group sections
127 are now taken into account
128 - implemented curves
129 - implemented opcodes volume_onccN, volume_curveccN
130 - implemented opcode volume_smoothccN
131 - implemented opcodes fillfo_depthccN, amplfo_depthccN,
132 lfoN_volume, lfoN_volume_onccX, lfoN_volume_smoothccX,
133 lfoN_freq_smoothccX, lfoN_pitch_smoothccX, lfoN_pan_onccX,
134 lfoN_pan_smoothccX, lfoN_cutoff_onccX, lfoN_cutoff_smoothccX,
135 lfoN_resonance_onccX, lfoN_resonance_smoothccX, lfoN_delay_onccX
136 - implemented opcode end
137 - implemented opcodes egN_amplitude_onccX,
138 egN_volume, egN_volume_onccX, egN_cutoff, egN_cutoff_onccX,
139 egN_pitch, egN_pitch_onccX, egN_resonance, egN_resonance_onccX
140 - implemented opcodes xfin_lokey, xfin_hikey,
141 xfout_lokey, xfout_hikey, xf_keycurve, xfin_lovel, xfin_hivel,
142 xfout_lovel, xfout_hivel, xf_velcurve, xfin_loccN, xfin_hiccN,
143 xfout_loccN, xfout_hiccN, xf_cccurve
144 - implemented opcodes pan_onccN, pan_smoothccN,
145 pan_curveccN, egN_pan, egN_pan_curve, egN_pan_onccX,
146 egN_pan_curveccX, pitch_veltrack
147 - when failed to parse a sfz file
148 print the line number on which the error occurs
149 - use common pool of CC objects to minimize RAM usage
150 - implemented opcodes amplfo_delay_onccN,
151 amplfo_fade_onccN, fillfo_delay_onccN, fillfo_fade_onccN,
152 pitchlfo_delay_onccN, pitchlfo_fade_onccN
153 - implemented opcodes fileg_delay_onccN,
154 fileg_start_onccN, fileg_attack_onccN, fileg_hold_onccN,
155 fileg_decay_onccN, fileg_sustain_onccN, fileg_release_onccN,
156 fileg_depth_onccN, pitcheg_delay_onccN, pitcheg_start_onccN,
157 pitcheg_attack_onccN, pitcheg_hold_onccN, pitcheg_decay_onccN,
158 pitcheg_sustain_onccN, pitcheg_release_onccN, pitcheg_depth_onccN
159 - implemented automatic aliasing *ccN <-> *_onccN
160 - *lfo_freqccN wasn't working when the respective *lfo_freq
161 was not set or was set to zero
162 - lfoN_freq_onccX wasn't working when lfoN_freq
163 was not set or was set to zero
164 - implemented opcodes resonance_onccN, resonance_smoothccN,
165 resonance_curveccN, cutoff_smoothccN, cutoff_curveccN
166 - implemented opcodes fillfo_depthchanaft,
167 fillfo_freqchanaft, amplfo_depthchanaft, amplfo_freqchanaft,
168 pitchlfo_depthchanaft, pitchlfo_freqchanaft
169 - implemented opcodes pitch_onccN,
170 pitch_curveccN, pitch_smoothccN, pitch_stepccN
171 - implemented opcodes volume_stepccN, pan_stepccN,
172 cutoff_stepccN, resonance_stepccN, lfoN_freq_stepccX,
173 lfoN_volume_stepccX, lfoN_pitch_stepccX, lfoN_pan_stepccX,
174 lfoN_cutoff_stepccX, lfoN_resonance_stepccX
175 - implemented opcodes eq1_freq, eq2_freq, eq3_freq,
176 eq1_freqccN, eq2_freqccN, eq3_freqccN, eq1_bw, eq2_bw, eq3_bw,
177 eq1_bwccN, eq2_bwccN, eq3_bwccN, eq1_gain, eq2_gain, eq3_gain,
178 eq1_gainccN, eq2_gainccN, eq3_gainccN
179 - implemented opcodes delay, delay_onccN, delay_random,
180 delay_samples, delay_samples_onccN
181 - implemented opcodes egN_eq1gain, egN_eq2gain, egN_eq3gain,
182 egN_eq1gain_onccX, egN_eq2gain_onccX, egN_eq3gain_onccX, egN_eq1freq,
183 egN_eq2freq, egN_eq3freq, egN_eq1freq_onccX, egN_eq2freq_onccX,
184 egN_eq3freq_onccX, egN_eq1bw, egN_eq2bw, egN_eq3bw, egN_eq1bw_onccX,
185 egN_eq2bw_onccX, egN_eq3bw_onccX, lfoN_eq1gain, lfoN_eq2gain,
186 lfoN_eq3gain, lfoN_eq1gain_onccX, lfoN_eq2gain_onccX, lfoN_eq3gain_onccX,
187 lfoN_eq1gain_smoothccX, lfoN_eq2gain_smoothccX, lfoN_eq3gain_smoothccX,
188 lfoN_eq1gain_stepccX, lfoN_eq2gain_stepccX, lfoN_eq3gain_stepccX,
189 lfoN_eq1freq, lfoN_eq2freq, lfoN_eq3freq, lfoN_eq1freq_onccX,
190 lfoN_eq2freq_onccX, lfoN_eq3freq_onccX, lfoN_eq1freq_smoothccX,
191 lfoN_eq2freq_smoothccX, lfoN_eq3freq_smoothccX, lfoN_eq1freq_stepccX,
192 lfoN_eq2freq_stepccX, lfoN_eq3freq_stepccX, lfoN_eq1bw, lfoN_eq2bw,
193 lfoN_eq3bw, lfoN_eq1bw_onccX, lfoN_eq2bw_onccX, lfoN_eq3bw_onccX,
194 lfoN_eq1bw_smoothccX, lfoN_eq2bw_smoothccX, lfoN_eq3bw_smoothccX,
195 lfoN_eq1bw_stepccX, lfoN_eq2bw_stepccX, lfoN_eq3bw_stepccX
196 - implemented opcodes eq1_vel2freq, eq2_vel2freq,
197 eq3_vel2freq, eq1_vel2gain, eq2_vel2gain, eq3_vel2gain
198 - sfz parser: allow double spaces in sample filenames
199 - sfz parser: allow absolute paths for sample filenames
200 - use linear decay and release for filter and pitch EG
201
202 * SoundFont format engine:
203 - Initial implementation (not usable yet)
204 - RT-safeness: avoid malloc in audio thread
205 - fixed a bug that could cause voice stealing to fail
206 - fine-tuned amplitude EG (by switching from gig to sfz EG)
207 - initial implementation of Vibrato LFO and Modulation LFO
208 - initial implementation of cutoff filter
209 - use linear decay and release for filter and pitch EG
210
211 * Gigasampler format engine:
212 - bugfix: pitch LFO controller "internal+aftertouch" was broken
213 - bugfix: filter keyboard tracking was broken
214 - filter performance fix (an unnecessary copy was made of the
215 filter parameters in each sub fragment)
216
217 * Host plugins:
218 - AU bugfix: failed to destroy its audio/MIDI devices
219 - Listen to all interfaces on Mac OS X (INADDR_ANY)
220 - VST bugfix: If the host called resume() before and after
221 changing sample rate or block size, the number of channels was
222 incorrectly set to two. This caused silence in Cubase 5.
223 - save engine type (gig, sfz or sf2) in plugin state
224 - VST: when opening Fantasia, look for both 32 and 64 bit Java on
225 64 bit Windows
226 - AU: changed number of output channels from one stereo to 16
227 stereo
228 - VST: made it possible to build the VST plugin for Mac
229 - AU: link AU plugin dynamically if --disable-shared isn't
230 specified
231
232 * MIDI driver:
233 - ALSA MIDI driver supports now "NAME" device parameter, for overriding
234 the ALSA sequencer client name
235 - removed limit of maximum amount of MIDI ports per MIDI device, since
236 there is no reason for this limit
237 - MME: fixed memory handling bug found with cppcheck
238
239 * audio driver:
240 - ASIO driver fixes for newer gcc versions (fix from PortAudio)
241
242 * LSCP server:
243 - added support for sending MIDI CC messages via LSCP command
244 "SEND CHANNEL MIDI_DATA CC <sampler-chan> <ctrl> <val>"
245 - added LSCP command "GET AVAILABLE_EFFECTS"
246 - added LSCP command "LIST AVAILABLE_EFFECTS"
247 - added LSCP command "GET EFFECT INFO <effect-index>"
248 - added LSCP command "CREATE EFFECT_INSTANCE <effect-index>"
249 - added LSCP command
250 "CREATE EFFECT_INSTANCE <effect-system> <module> <effect-name>"
251 - added LSCP command "DESTROY EFFECT_INSTANCE <effect-instance>"
252 - added LSCP command "GET EFFECT_INSTANCES"
253 - added LSCP command "LIST EFFECT_INSTANCES"
254 - added LSCP command "GET EFFECT_INSTANCE INFO <effect-instance>"
255 - added LSCP command
256 "GET EFFECT_INSTANCE_INPUT_CONTROL INFO <effect-instance> <input-control>"
257 - added LSCP command "SET EFFECT_INSTANCE_INPUT_CONTROL VALUE
258 <effect-instance> <input-control> <value>"
259 - added LSCP command "GET SEND_EFFECT_CHAINS <audio-device>"
260 - added LSCP command "LIST SEND_EFFECT_CHAINS <audio-device>"
261 - added LSCP command "ADD SEND_EFFECT_CHAIN <audio-device>"
262 - added LSCP command
263 "REMOVE SEND_EFFECT_CHAIN <audio-device> <effect-chain>"
264 - added LSCP command
265 "GET SEND_EFFECT_CHAIN INFO <audio-device> <effect-chain>"
266 - added LSCP command "APPEND SEND_EFFECT_CHAIN EFFECT <audio-device>
267 <effect-chain> <effect-instance>"
268 - added LSCP command "INSERT SEND_EFFECT_CHAIN EFFECT <audio-device>
269 <effect-chain> <effect-chain-pos> <effect-instance>"
270 - added LSCP command "REMOVE SEND_EFFECT_CHAIN EFFECT <audio-device>
271 <effect-chain> <chain-pos>"
272 - added LSCP command "SET FX_SEND EFFECT <sampler_channel>
273 <fx_send_id> <effect_chain> <chain_pos>"
274 - added LSCP command "REMOVE FX_SEND EFFECT <sampler_channel> <fx_send_id>"
275 - added LSCP commands "SUBSCRIBE EFFECT_INSTANCE_COUNT",
276 "SUBSCRIBE EFFECT_INSTANCE_INFO", "SUBSCRIBE SEND_EFFECT_CHAIN_COUNT",
277 "SUBSCRIBE SEND_EFFECT_CHAIN_INFO"
278
279 * Bug fixes:
280 - Fixed crash which may occur when MIDI key + transpose is out of range
281 - minor valgrind fixes
282 - fixed crash which occurred when changing an already deployed sampler
283 channel to a different engine type
284 - fixed crash when deleting a sampler channel or changing engine
285 type while an instrument load was in progress
286 - bugfix: playing a note while changing the instrument could cause
287 a crash, or give "Handing back unknown region" error messages
288 - bugfix: calling SET VOICES (which Fantasia does on start and
289 refresh) could cause instruments to be unloaded
290 - Mac OS X: fixed name collision of enum in EffectControl and
291 wrong name of destructor in AudioOutputDeviceCoreAudio.cpp
292 - Mac OS X: fixed hanging threads
293 - Windows: disabled the previous thread fix on non-Mac systems, as
294 it caused hanging threads on Windows
295 - Fixed possible crashes due to corrupted MIDI/audio device list
296 after MIDI/audio device creation failure
297 - When creating MIDI instrument map entries with "PERSISTENT" type, the
298 instruments were uselessly precached with zero samples, however it still
299 took the full preloading time and on 1st program change the respective
300 instrument was completely reloaded again.
301 - fixed handling of rapid bank select and program change messages
302 sent to the same sampler channel (patch from the Open Octave
303 project, slightly adjusted)
304 - fixed crash when trying to create an effect instance with controls
305 which min and/or max values depend on the sample rate
306 - fixed bug #162
307
308 Version 1.0.0 (31 July 2009)
309
310 * packaging changes:
311 - autoconf bugfix: the PKG_CONFIG variable wasn't initialized properly,
312 causing e.g. the libgig test to fail when
313 "./configure --disable-jack-driver" was used
314 (patch by Alexis Ballier)
315 - fixed compilation with gcc 4.3
316 - fixes for building on OS X (thanks to Ebrahim Mayat for testing)
317 - fixed configure so it detects x86_64 (#107)
318 - fixes for building with newer MinGW versions
319 - fix for building with bison 2.4 (#111)
320 - fixed building with libgig installed in a non-standard directory
321 - minor fix in configure for mmsystem.h detection on MinGW
322 - Windows: look for editor plugins and Fantasia using base
323 directory of liblinuxsampler dll (look in the same directory and one
324 directory above)
325 - configure script fix: removed unconditional use of SSE
326 - fixed building with sqlite installed in a non-standard directory
327 - when cross-compiling, don't try to create instruments.db
328 - fix for new mingw-w64 version, which has usleep
329
330 * general changes:
331 - bugfix: on some POSIX systems instrument editor plugins refused to
332 load as we used a non-portable Linux specific struct field
333 (fixes bug #70, patch by Ronald Baljeu)
334 - fixed endless loop which occured when loading an instrument editor
335 plugin DLL on Windows systems failed
336 - fixed memory leaks that occurred when liblinuxsampler was unloaded
337 - optimized the SynchronizedConfig class so it doesn't wait
338 unnecessarily long after an update
339 - added support for notifying instrument editors on note-on / note-off
340 events (e.g. to highlight the pressed keys on the virtual keyboard
341 of gigedit)
342 - added support for triggering notes by instrument editors (see above)
343 - be verbose on DLL load errors (on Linux)
344 - fixed di-harmonic triangle LFO implementation (this LFO implementation
345 is only used by very few systems, most pick the int math
346 implementation, which is usually faster)
347 - fixes for audio drivers with varying buffer sizes
348 - experimental support for running LinuxSampler as a DSSI, LV2 and
349 VST plugin
350 - notification events for stream/voice count statistics are now sent
351 only when there are actual changes
352 - added memory ordering constraints to improve stability on
353 multi-core and multi-cpu systems
354 - maximum voices and disk streams can now be altered at runtime
355 - fixed CPU feature detection on x86_64 (maybe fixes #108)
356 - automatic stacktrace mechanism is now turned off by default and can
357 be switched on by command line option "--stacktrace" (the automatic
358 stacktrace mechanism seems to be broken on most systems at the moment)
359 - C++ API method InstrumentManager::LaunchInstrumentEditor() now returns
360 a pointer to the launched InstrumentEditor object
361 - added optional 3rd party user data parameter for following
362 liblinuxsampler C++ API methods: InstrumentEditor::Main(),
363 InstrumentEditor::Launch(),
364 InstrumentManager::LaunchInstrumentEditor()
365 - theoretical fix: made SynchronizedConfig follow C++0x memory
366 model more strictly
367 - fixes for using large audio device buffers
368 - Windows: add the installation directory to the DLL search path
369 when loading an editor plugin (solves problems with VST and
370 gigedit on systems with other GTK versions installed)
371
372 * audio driver:
373 - removed the nonsense audio channel constraint (which was hard coded to
374 max. 100 audio channels) for most audio drivers
375 - JACK audio driver did not offer a device parameter "SAMPLERATE" as
376 opposed to the LSCP specs
377 - bugfix: the SAMPLERATE parameter of some drivers (e.g. JACK)
378 reflected the wrong value
379 - fixed a memory management bug in ASIO driver
380 - Makefile fix: JACK_CFLAGS wasn't used
381 - JACK: use jack_client_open instead of the deprecated
382 jack_client_new
383 - added (experimental) CoreAudio driver
384 - applied old fixes to the ASIO driver that were included in the
385 previous binary release but accidentally never committed to CVS
386 (fixes #117)
387 - fixes for ASIO on mingw-w64 (iasio wrapper is not needed on
388 win64)
389 - VST: added support for sample rate and buffer size changes
390 - VST: close editor (Fantasia) when the VST is removed
391 - VST: avoid opening Fantasia more than once for each VST instance
392 - VST: export main function as "main" on Linux too (fix for
393 energyXT)
394 - VST: changed number of output channels from one stereo to 16
395 stereo
396 - added channel routing, fxsends and midi maps to the settings
397 stored in the plugin state
398 - performance optimization of AudioChannel::MixTo() and
399 AudioChannel::CopyTo() methods using GCC vector exensions
400 (if available)
401 - ASIO fixes: avoid initializing the device twice, avoid throwing
402 exception when getting parameters from a disconnected device
403
404 * MIDI driver:
405 - added JACK MIDI driver
406 - dispatch bank select as ordinary CC as well, the user might seriously
407 want to (mis)use it for some purpose ("fixed" in all current MIDI
408 input drivers: ALSA, CoreMIDI, JACK, MidiShare, MME)
409 - bugfix: pitch bend wasn't working with JackMidi, VST, LV2, MME,
410 CoreMidi or AU
411 - fixed mingw-w64 compilation error in MME driver
412 - made program change handling in MIDI thread real-time safe by
413 moving the logic to a non-RT thread
414 - fixed minor memory leak in ALSA driver
415
416 * instruments database:
417 - avoid time consuming samples scanning when adding instruments
418 to the instruments database
419 - added support for handling lost files in the instruments database
420 - Implemented option for adding instruments in separate directories
421 in the instruments database
422 (patch by Chris Cherrett & Andrew Williams, a bit adjusted)
423 - work-around for missing fnmatch function on Windows to make
424 instrument database compilable
425 - added instrument database support on Windows
426 works with both standalone mode and VST plugin.
427 the instruments DB file is located in
428 %USERPROFILE%\.linuxsampler\instruments.db which allows different
429 databases for each windows user
430 if no DB is present it automatically creates the .linuxsampler subdir
431 and then creates an empty DB
432 - fixed recursive import, which was broken on Windows
433
434 * Gigasampler format engine:
435 - fixed a memory leak that could happen when a channel was deleted
436 while notes were playing
437 - made it possible to load an instrument even if the audio thread
438 isn't running
439 - added partial support for the "Controller Triggered" MIDI rule,
440 enough for piano gigs with pedal noise samples
441 - minor fix: only mark FX sends as being modified if really the
442 respective FX send MIDI controller was used
443 - added support for GM global device volume SysEx message
444 (can be selected at compile time to either apply globally to the
445 whole sampler [default] or only to the sampler channels that are
446 connected to the respective MIDI input port the SysEx message arrived
447 on)
448 - bugfix: notes triggered at position 0 in the audio buffer were
449 sometimes wrongly killed in the same buffer, causing no sound to
450 be played
451 - added support for chromatic / drumkit mode Roland GS Sysex message
452 which is usally used to switch a part between chromatic sounds and
453 drumkit sounds (as opposed to their common default setting of MIDI
454 part 10 being a drumkit part and all other ones chromatic parts), in
455 LS however one can switch between the first 16 MIDI instrument maps
456 defined for the sampler
457 - made it possible to create multiple sample channels even if the
458 audio thread isn't running
459 - fixed crash when removing channel with active voices (#116)
460 - bugfix: on sample reference changes (instrument editor), only
461 un-cache the respective sample if it's really not used by any
462 sampler engine anymore
463 - re-cache samples in case they were changed by an instrument editor,
464 e.g. when a sample was added while playing (#82)
465 - fixed hanging notes which occured when note-off event had the exact
466 same time stamp as the voice's note-on event and occured both in the
467 same audio fragment cycle (fixes bug #112)
468 - added support for the "fine tune" and "pitch bend range"
469 instrument-level gig parameters
470 - fixed minor artifacts in pitch bend handling
471 - added support for GS Reset SysEx message
472 - allow gig files to use unlimited downward pitch shifting
473 - added a limit check for upward pitch shifting
474 - bugfix: sometimes, when playing a note twice fast, the second
475 note was silent
476 - fixed crash happening when a pitch bend event arrived at the
477 same time a new instrument was loading
478
479 * LSCP server:
480 - added new LSCP event "CHANNEL_MIDI" which can be used by frontends to
481 react on MIDI data arriving on certain sampler channels (so far only
482 Note-On and Note-Off events are sent via this LSCP event)
483 - added new LSCP event "DEVICE_MIDI" which can be used by frontends to
484 react on MIDI data arriving on certain MIDI input devices (so far only
485 Note-On and Note-Off events are sent via this LSCP event)
486 - added new LSCP commands: FIND LOST DB_INSTRUMENT_FILES and
487 SET DB_INSTRUMENT FILE_PATH
488 - added new LSCP command: SEND CHANNEL MIDI_DATA which can be used by
489 frontends to send MIDI messages to specific sampler channel
490 - added two additional fields to GET FILE INSTRUMENT INFO command -
491 KEY_BINDINGS and KEYSWITCH_BINDINGS
492 - bugfix: the bank number provided by MIDI_INSTRUMENT_INFO notifications
493 was incorrect
494 - Optimized the retrieval of the MIDI instrument mappings
495 - added new LSCP command "SET VOICES" to globally alter the maximum
496 amount of voices, added new LSCP event "GLOBAL_INFO:VOICES" which will
497 be triggered respectively
498 - added new LSCP command "SET STREAMS" to globally alter the maximum
499 amount of disk streams, added new LSCP event "GLOBAL_INFO:STREAMS"
500 which will be triggered respectively
501 - bugfix: retry if "select" returns EINTR (this fixes a crash when
502 a gigedit file dialog is opened)
503 - close all connections when LSCPServer is deleted
504 - hard close of all sockets on exit
505 - bugfix: SET CHANNEL MIDI_INPUT_TYPE didn't work with the MME
506 driver
507
508 * Bug fixes:
509 - fixed a crash which occurs when removing a sampler channel waiting
510 to start instrument loading after another channel
511 - fixed a crash which occurs when removing a sampler channel with
512 instrument loading in progress (bug #113)
513 - fixed termination caused by uncaught exception when adding MIDI
514 instrument with PERSISTENT load mode
515 - fixed possible iterator invalidations when resetting the sampler
516 - fixed memory leaks when issuing the following LSCP commands:
517 GET AUDIO_OUTPUT_DRIVER INFO
518 GET AUDIO_OUTPUT_DRIVER_PARAMETER INFO
519 GET MIDI_INPUT_DRIVER INFO
520 GET MIDI_INPUT_DRIVER_PARAMETER INFO
521 - fixed possible compilation error when sqlite is not present
522 - fixed orphaned pointers when setting maximum voices limit (bug #118)
523 - fixed crash when changing the audio output device of a sampler
524 channel with loaded instrument and start playing notes
525 - fixed endless loop in Engine::SuspendAll() (bug #120)
526 - fixed a low-level atomic load function that was broken on 64-bit
527 PowerPC, which probably could cause crashes on that platform
528 - fixed a memory management error which could cause a crash when a
529 plugin was unloaded
530 - bugfix: two private structs had the same name, which could cause
531 problems if the linker chose the wrong constructor
532 - fixed low-level ConditionServer usage bug that caused lockups on
533 Windows
534
535
536 Version 0.5.1 (6 December 2007)
537
538 * packaging changes:
539 - added autoconf checks for pthread library
540 - added autoconf check for pthread bug found on certain NPTL-enabled
541 glibc versions (see Gentoo bug report #194076)
542 - added autoconf checks for MS Windows
543
544 * general changes:
545 - bugfix: the thread used by an editor plugin didn't die when the
546 editor closed
547 - bugfix: Ringbuffer.h: fill_write_space_with_null() did not zero
548 out all the space. operator--() did not apply size_mask after
549 decrementing the read_ptr. DEFAULT_WRAP_ELEMENTS set to 0 in
550 order to avoid problems with the _NonVolatileReader functions.
551 - bugfix: Stream.h: added a missing divide by BytesPerSample in
552 GetWriteSpace(). Since this function is currently only used in
553 the stream's qsort() compare function, it didn't trigger any
554 bugs.
555 - Resampler.h, Synthesizer.h: cubic interpolation now works in
556 24bit mode too. Faster method to read 24bit words on little
557 endian machines (x86): replaced 3 byte reads + shifts with a 1
558 unaligned 32bit read and shift
559 - experimental support for MS Windows (MIDI input via MME, AUDIO
560 output via ASIO)
561 - made handling of SIGINT signal (Ctrl-C) a bit more robust
562 - support for monitoring the total number of active disk streams
563 (new LSCP commands: GET TOTAL_STREAM_COUNT,
564 SUBSCRIBE TOTAL_STREAM_COUNT, UNSUBSCRIBE TOTAL_STREAM_COUNT)
565
566 * AUDIO driver:
567 - added Windows ASIO low latency audio driver
568
569 * MIDI driver:
570 - added MME Windows MIDI driver
571
572 * LSCP server:
573 - added support for Windows style path / filenames, however with
574 forward slash path separators instead of backslash
575 (i.e. "C:/foo/bar.gig")
576 - allow naughty liblscp to send non-string device parameters within
577 apostrophes as well
578 - added new LSCP commands: "GET FILE INSTRUMENTS <file>",
579 "LIST FILE INSTRUMENTS <file>" and
580 "GET FILE INSTRUMENT INFO <file> <index>" for retrieving informations
581 about an arbitrary instrument file on the system where the sampler is
582 running on
583
584 Version 0.5.0 (15 October 2007)
585
586 * packaging changes:
587 - config.h is not going to be installed along with liblinuxsampler's
588 API header files anymore
589 - only the API relevant header (and source) files will be exported to
590 the Doxygen API documentation (explicitly listed in Doxyfile.in)
591 - added completely new XCode project files for Mac OSX which is now
592 capable to execute our autoconf environment, thus no need anymore
593 to maintain the compile time configuration file (osx/version.h) for
594 OSX manually (patch by Toshi Nagata)
595 - fixed buggy boolean --enable-foo / --disable-foo configure script
596 parameters
597 - global.h now only covers global definitions that are needed for the
598 C++ API header files, all implementation internal global definitions
599 are now in global_private.h
600 - atomic.h is not exposed to the C++ API anymore
601 - no need to include config.h anymore for using LS's API header files
602 - fixed warnings in API doc generation
603
604 * general changes:
605 - replaced the old, confusing MIDI program change mechanism by a
606 flexible MIDI instrument mapper which allows to map arbitrary
607 (MIDI bank, MIDI program) pairs with arbitrary
608 (engine type, instrument file, file index) triplets which will be
609 loaded on the respective channel when such MIDI program change
610 messages arrive, beside that, each entry allows to define a life-time
611 strategy for the instrument, so the user can define whether the
612 instrument should i.e. be permanently loaded (to be able to switch
613 quickly among sounds) or i.e. loaded just on demand when the
614 respective program change arrives (to safe RAM space), as well as a
615 global volume factor for each entry, so the user can adjust the volume
616 dynamic of his mapped instrument collection without having to modify
617 the instrument files, also one can manage arbitrary amount of such
618 MIDI instrument maps and assign each sampler channel individually
619 a certain map, so that i.e. separation of normal instruments and
620 drumkits is possible
621 - new notification events for tracking changes to audio/MIDI devices,
622 MIDI instrument maps, MIDI instruments, FX sends, global volume.
623 - sampler was limited to load max. 200 instruments in the background
624 due to a constant size RingBuffer FIFO which is now replaced by a
625 dynamic (unlimited) size std::list FIFO
626 - added FX sends, these allow to route audio signals to arbitrary audio
627 output channels for being processed by external effect processors
628 (i.e. jack-rack), the send levels are controllable via arbitrary MIDI
629 controllers
630 - global (sampler wide) volume can now be controlled at runtime
631 - Implemented new, improved notification system
632 - fixed compilation errors regarding OSX
633 (patch by Toshi Nagata)
634 - implemented instruments database
635 - added support for escape sequences to the instruments database
636 - added highly experimental support for on-the-fly instrument editing
637 within the sampler's process (by using instrument editor plugins),
638 you'll notice the new "Registered instrument editors:" message on
639 startup, added a new LSCP command:
640 "EDIT CHANNEL INSTRUMENT <sampler-channel>"
641 to spawn a matching instrument editor for the instrument on the
642 given sampler channel, the plugin path can be overridden at compile
643 time with ./configure --enable-plugin-dir=/some/dir
644 - added experimental code for synchronizing instrument editors hosted
645 in the sampler's process to safely edit instruments while playing
646 without a crash (hopefully) by either suspending single regions
647 wherever possible or if unavoidable whole engine(s)
648 - fixed several issues in fundamental "Thread" class: set scheduling
649 policy and priority on thread level, set a minimum stack size for
650 thread (TODO: a reasonable value yet to be tested), bugfix: non-RT
651 threads simply inherited properties of starting thread instead of
652 setting their own policy and priority
653 - minor fix in our automatic stack trace mechanism on crashes, the
654 main process did not wait for the stack trace process to finish
655 its output
656 - fixed some minor memory leaks
657 - reenabled assembly features support, at the moment only for
658 enabling a fast denormal FPU mode (x86 platforms supporting SSE2)
659 - minor assembly fix in x86 features detection (don't use the PIC
660 register, to avoid relocations in the text segment at runtime)
661 - POSIX callback functions of Thread.h are hidden
662
663 * MIDI driver:
664 - dispatch bank select (MSB and LSB) messages
665
666 * audio driver:
667 - the ALSA audio output driver parameters now reflect the correct
668 parameter value ranges for the respective selected sound card
669 (patch by Till Wimmer, a bit fixed and extended)
670
671 * Gigasampler format engine:
672 - if a filter is used and EG2 finishes before EG1, let the voice
673 die when EG2 has finished (this fixes a problem with clicks and
674 voice starvation for some gigs)
675 - playback is no longer disabled during instrument loading
676 - all notes playing on a channel that changes its instrument keep
677 playing with the old instrument until they get a note off
678 command
679 - EG fix: a release value of zero could cause noises or crash
680 - handle MIDI coarse tuning messages (MIDI RPN #0 MSB #2 LSB)
681 - EG fine tuning: when attack is zero the EG starts at a level
682 above max sustain level, which means that there is a decay phase
683 even if sustain is 100%
684 - more EG fixes: the level could sometimes go below zero and cause
685 noises or crashes
686 - minor fix of EGDecay (patch by Toshi Nagata)
687 - fixed compiler error when --enable-override-filter-type was
688 supplied to the configure script (fixes #46)
689 - disk thread: queue sizes are now proportional to CONFIG_MAX_STREAMS
690 instead of a fix value
691 - behavior fix: on MIDI CC# 65 (portamento on / off), 126 (mono mode),
692 127 (solo mode) only kill voices if the respective mode really
693 changed
694
695 * LSCP server:
696 - fixed compile time error for old Bison versions
697 (i.e. v1.28 found on MacOS 10.4, patch by Toshi Nagata)
698 - parser now supports extended ASCII character set
699 (up to ASCII code 255, i.e. includes now umlauts and accents)
700 - filename arguments in LSCP commands now allow to use escape
701 sequences, that is directly literal as one of: \', \", \\, \n, \r,
702 \f, \t, \v, or as octal ASCII code value like \132, or as hex ASCII
703 code value like \xf2) (fixes bug #24)
704 - the following LSCP commands now also support escape sequences for at
705 least one of their text-based parameters (i.e. name, description):
706 "ADD MIDI_INSTRUMENT_MAP", "MAP MIDI_INSTRUMENT",
707 "SET MIDI_INSTRUMENT_MAP NAME", "SET FX_SEND NAME", "CREATE FX_SEND",
708 "SET DB_INSTRUMENT_DIRECTORY NAME",
709 "SET DB_INSTRUMENT_DIRECTORY DESCRIPTION", "SET DB_INSTRUMENT NAME",
710 "SET DB_INSTRUMENT DESCRIPTION", "FIND DB_INSTRUMENTS",
711 "FIND DB_INSTRUMENT_DIRECTORIES"
712 - returns verbose syntax errors (line and column where syntax error
713 occured, the unexpected character and the actually expected, possible
714 character(s), the latter only if less than 5 possibilities)
715 - made sure that LSCP syntax is not affected by gigedit locale
716 settings
717 - bugfix regarding strings parameter lists: all comma separated lists
718 of strings were treated as being one string containing commas
719 (fixes #57)
720
721 * Bug fixes:
722 - fixed crash occurring on certain LSCP scripts (Bug 39)
723 - another thread safety fix for lscp "load engine" and "set
724 channel audio output device"
725 - fixed a crash which occurs when reassigning the same engine
726 on a sampler channel with connected MIDI device
727 - fixed a crash which occurs when changing the number of ports of a MIDI
728 device connected to a sampler channel to number less then or equal
729 to the index of the port to which the sampler channel is connected.
730 - The previous bindings were not been disconnected when altering
731 the ALSA_SEQ_BINDINGS parameter. Introduced a NONE keyword for
732 unsubscribing from all bindings (e.g. ALSA_SEQ_BINDINGS=NONE).
733 - The active stream/voice count statistic was incorrect.
734 - notification events were not been sent for some sampler
735 channel changes
736 - added default min and max values to restrict the number of allowed
737 audio output channels and MIDI input ports
738 - the connection to the PCM interface is now closed when destroying
739 an audio output device
740 - files with slash in their path or filename could not be loaded
741
742 * test cases:
743 - updated and fixed (haven't been touched in a while)
744
745 Version 0.4.0 (24 November 2006)
746
747 * packaging changes:
748 - changed deprecated copyright attribute to license; added ldconfig
749 to post-(un)install steps; added devel package for liblinuxsampler;
750 to linuxsampler.spec (RPM)
751 - install necessary development header files for allowing 3rd party
752 applications to link against liblinuxsampler
753 - liblinuxsampler's API documentation can be generated with 'make docs'
754 (Doxygen required)
755 - added benchmark to automatically detect the best triangle LFO
756 implementation (currently either an integer math solution or a
757 di-harmonic approximation), automatic detection can be overriden
758 with --enable-signed-triang-algo=x and --enable-unsigned-triang-algo=x
759 configure script argument though (mandatory for cross-compilation)
760 - do not automatically pick optimized gcc flags if the user already
761 provided some on his own (as CXXFLAGS)
762 - added compile time option to disable processing of All-Notes-Off MIDI
763 messages
764 - added compile time options to allow disabling the various audio and
765 MIDI drivers
766 - fixed automatic GCC CPU switch detection on PPC
767 (patch by Ebrahim Mayat)
768
769 * Gigasampler format engine:
770 - extensive synthesis optimization
771 (reimplementation of EGs and LFO(s), removed synthesis parameter
772 prerendering and the synthesis parameter matrix in general, splitting
773 each audio fragment into subfragments now where each subfragment uses
774 constant pitch and filter coefficients. The volume coefficient is
775 linearly interpolated inside a subfragment, unless
776 --disable-interpolate-volume is set.)
777 - fine tuning of the EG modulation parameters
778 - improved filter cutoff calculation by adding support for the
779 following gig parameters: Cutoff freq (used when no cutoff
780 controller is defined), Control invert, Minimum cutoff, Velocity
781 curve and Velocity range. The keyboard tracking now scales
782 cutoff frequency instead of resonance.
783 - added support for gig parameter Resonance.
784 - fixed bug in sysex handling (patch by Juan Linietsky)
785 - added global volume attenuation of -9 dB (0.35f) to prevent clipping
786 which can be overridden with --enable-global-attenuation
787 - EG fixes: made the length of "attack hold" stage more
788 accurate. Release stage can now start before attack stage
789 ends. Cancel release didn't work when sustain was zero. Attack
790 time now has a minimal value to prevent clicks.
791 - fixed pitch changes larger than one octave
792 - fixed EG3 (pitch envelope) synthesis which was neutral all the time
793 - implemented portamento mode and solo mode (a.k.a 'mono mode'):
794 all modes can be altered via standard GM messages, that is CC5 for
795 altering portamento time, CC65 for enabling / disabling portamento
796 mode, CC126 for enabling solo mode and CC127 for disabling solo mode
797 - fine tuning of the curves for volume (CC7), pan (CC10 and gig
798 parameter) and crossfade
799 - added support for the "attenuation controller threshold" gig
800 parameter
801 - added smoothing of volume changes caused by control change
802 messages
803 - sample loop parameters are now taken from the DimensionRegion
804 instead of the wave chunk
805 - fixed keyswitching for v3 gigs with a number of keyswitch splits
806 not equal to a power of two
807 - reimplementation of the filter algorithm. The new filter is more
808 accurate and supports all gig filter types, including bandreject
809 and lowpass turbo.
810 - real support for 24 bit samples - samples are not truncated to
811 16 bits anymore
812 - support for aftertouch (channel pressure, not polyphonic
813 aftertouch)
814 - LFO1 behaviour fixed (dampening from max volume instead of
815 amplifying from 0)
816
817 * LSCP server:
818 - fixed application exit on broken pipe error (fixes bug #20)
819 - fixed the notification messages delay due to lack of
820 network activity (fixes bug #26)
821 - fixed parser bug which occured on space(s) within device parameters
822 (e.g. "SET AUDIO_OUTPUT_CHANNEL_PARAMETER 0 0 SOMEPARAM='foo bar'")
823
824 * audio driver:
825 - added aRts audio output driver (by no means RT safe)
826
827 * MIDI driver:
828 - fixed legacy sysex code which caused dispatching of MIDI SysEx
829 messages several times instead of once
830 - API extension for MIDI drivers which already supply exact time stamps
831 for events (i.e. for offline rendering based MIDI drivers)
832 - added checks for bad MIDI data
833
834 * linuxsampler application:
835 - show available sampler engine types on startup
836
837 * general changes:
838 - support for muting sampler channels and solo mode of the same, two new
839 LSCP commands ("SET CHANNEL MUTE" and "SET CHANNEL SOLO") and two new
840 fields ("MUTE" and "SOLO") for command "GET CHANNEL INFO" were
841 introduced for this, the behavior is the same like on a mixer console
842 (patch by Grigor Iliev, a bit adjusted). Also added configure option
843 --enable-process-muted-channels which can be used to enable the
844 processing of muted channels.
845 - support for sostenuto pedal
846 - support for monitoring the total number of active voices
847 (new LSCP commands: GET TOTAL_VOICE_COUNT, GET TOTAL_VOICE_COUNT_MAX,
848 SUBSCRIBE TOTAL_VOICE_COUNT, UNSUBSCRIBE TOTAL_VOICE_COUNT)
849 - fixed some memory management errors
850 - fixed some concurrency problems that could lead to crashes when
851 LSCP commands were executed
852 - fixed crash when instrument loading failed previously on the same
853 sampler channel (fixes bug #36)
854
855 Version 0.3.3 (15 July 2005)
856
857 * packaging changes:
858 - fixed compilation with gcc 4.0
859
860 * Gigasampler format engine:
861 - LFO preprocessing was performed even though the respective LFO was
862 disabled by the instrument patch (minor efficiency fix)
863 - if period time of chosen audio device is too small (< MIN_RELEASE_TIME)
864 for volume ramp downs in the same fragment (needed for current voice
865 stealing implementation) then simply inform the user with a warning
866 about possible click sounds and reduce the volume ramp down
867 appropriately instead of cancelling the audio device connection
868
869 Version 0.3.2 (24 June 2005)
870
871 * packaging changes:
872 - updated autotools build files to compile on OS X
873 (conditional compilation of CoreMIDI and MidiShare drivers)
874 - hand-crafted assembly optimization code can be disabled with
875 './configure --disable-asm' (definitely not recommended)
876 - fixed 'make dist' rule to include all necessary files
877 - require automake (>= 1.5) for 'make -f Makefile.cvs'
878 (due to 'dist-bzip2' automake option)
879
880 * Gigasampler format engine:
881 - support for the gig parameters for "release velocity response" curves
882 - fine tuning of the EGADSR envelope
883 - volume of release triggered samples now depends on note-on velocity,
884 note length and gig parameter "release trigger decay" instead of
885 note-off velocity.
886 - revised voice stealing
887 (fixes crash and endless loop caused by voice stealing)
888 - don't reset scale tuning on instrument or audio output device change
889 - handle key group conflicts right at the beginning of each fragment
890 instead of when the respective voice is actually launched
891 (fixes undefined behavior if stolen voices belonged to a key group -
892 this case was followed by a "killed voice survived" error message)
893 - fixed minor issue with null/silence samples
894 (those stole voices even though they don't need a voice at all which
895 resulted in "voice stealing didn't work out" messages)
896 - don't reset volume, pan, pitch and MIDI controller values on
897 instrument or audio output device change
898
899 * LSCP server:
900 - fixed some crashes (patch by Grigor Iliev, fixes #19)
901 - fixed LSCP event "CHANNEL_INFO" notification
902 (e.g. did not notify on volume changes or MIDI program change events)
903
904 * linuxsampler application:
905 - added command line parameters --lscp-addr and --lscp-port to override
906 default IP address and port of LSCP server
907
908 Version 0.3.1 (24 May 2005)
909
910 * initial release

  ViewVC Help
Powered by ViewVC