ViewVC logotype

Contents of /linuxsampler/trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log

Revision 2327 - (show annotations) (download)
Sat Mar 10 16:16:14 2012 UTC (8 years, 6 months ago) by persson
File size: 48297 byte(s)
* sfz/sf2 engine: fixed crash when using small audio fragment size

1 Version CVS HEAD (?)
3 * plugin changes:
4 - LV2 "state" extension support (patch by David Robillard)
6 * packaging changes:
7 - fixed building with newer MinGW-w64
8 - Mac OS X: support the new dir for Core Audio SDK
9 - Mac OS X: fixed building outside source directory
10 - made sure all source files for hostplugins are included when
11 doing "make dist"
12 - removed empty directories left from the cvs to svn migration
13 - fixed compilation with gcc 4.6.1
14 - another "make dist" fix, for the LV2 plugin
15 - made --enable-pthread-testcancel default on Mac OS X
16 - minor Makefile fix for building lscpparser when build and source
17 directories are separate
18 - Mac OS X: made it possible to specify plugin installation dir to
19 configure
20 - Mac OS X: Makefile fix for the install-strip target
22 * general changes:
23 - Refactoring: moved the independent code from
24 the Gigasampler format engine to base classes
25 - command line option '--profile' is currently disabled, since the
26 respective profiling code is currently broken
27 - Introduced support for optional environment variable
28 "LINUXSAMPLER_PLUGIN_DIR" which allows to override the directory
29 where the sampler shall look for instrument editor plugins
30 (patch by Luis Garrido, slightly modified).
31 - implemented Roland GS NRPN 1ArrH which allows to set volume per note
32 - implemented Roland GS NRPN 1CrrH which allows to set pan per note
33 - implemented Roland GS NRPN 1DrrH which allows to set reverb send per
34 note (in this implementation of the sampler its simply hard routed to
35 the 1st effect send of the sampler channel, no matter what the actual
36 effect type is)
37 - implemented Roland GS NRPN 1ErrH which allows to set chorus send per
38 note (in this implementation of the sampler its simply hard routed to
39 the 2nd effect send of the sampler channel, no matter what the actual
40 effect type is)
41 - implemented support for internal LADSPA effects
42 - raised limit of program change queue from 100 to 512
43 (as suggested by Alex Stone)
44 - implemented sine LFO, pulse LFO and saw LFO
45 - experimental support for per voice equalization
46 - added command line option --exec-after-init
48 * Gigasampler format engine:
49 - implemented the "round robin keyboard" dimension
50 - fixed round robin and random dimensions for cases when number of
51 dimension zones is not a power of two
52 - made round robin use a counter for each region instead of each
53 key
55 * SFZ format engine:
56 - Initial implementation (not usable yet)
57 - added support for v2 multiple stage envelope generators
58 - added a fine-tuned v1 envelope generator instead of using the
59 one from the gig engine
60 - fixed memory leak and memory handling errors
61 - added support for trigger=first, trigger=legato and sw_previous
62 - allow non-numerical key values ("C#4" for example)
63 - "key" opcode now sets pitch_keycenter too
64 - fixed error when unloading instrument with same sample used by
65 multiple regions
66 - added some opcode aliases, like loopmode for loop_mode, to be
67 more compatible
68 - added support for trigger=release and rt_decay
69 - added support for off_mode=normal
70 - added support for random, seq_position, seq_length and volume
71 - added v1 LFO opcodes to parser (no support in engine yet)
72 - added support for amp_veltrack and amp_velcurve_N
73 - fine-tuned the default velocity curve
74 - added support for transpose
75 - fixed crash when using sw_down/up
76 - improved logic for sw_lokey/hikey/up/down/last
77 - added more v1 aliases to parser
78 - reduced memory usage for sfz data
79 - RT-safeness: avoid malloc in audio thread
80 - fixed a bug that could cause voice stealing to fail
81 - optimized sample lookup
82 - improved support for exclusive groups (group, off_by and
83 off_mode)
84 - added support for controller triggered regions (on_locc/on_hicc)
85 - added support for loop_mode=one_shot
86 - fixed playback of 16 bit wav files on big endian CPUs
87 - added support for Ogg Vorbis sample files
88 - use loop markers from sample file if loop_start and loop_end are
89 not set in sfz file
90 - implemeted filters. Filter types: lowpass, bandpass, bandreject
91 and highpass. 1, 2, 4 and 6 pole filters. Opcodes: fil_type,
92 cutoff, resonance, fil_veltrack, fil_keytrack, fil_keycenter,
93 cutoff_cc, cutoff_chanaft.
94 - bugfix: zero ampeg_sustain didn't work
95 - added support for velocity effect on amplifier envelope time
96 (ampeg_vel2attack, ampeg_vel2decay, ampeg_vel2sustain and
97 ampeg_vel2release)
98 - added support for EG hold (ampeg_hold)
99 - added support for sample offset (offset)
100 - use the newly introduced signal units model
101 - implemented opcodes lfoN_delay,
102 lfoN_freq, lfoN_pan, lfoN_cutoff, lfoN_resonance
103 - implemented opcodes ampeg_delay, ampeg_vel2delay
104 pitcheg_delay, pitcheg_start, pitcheg_attack, pitcheg_hold,
105 pitcheg_decay, pitcheg_sustain, pitcheg_release, pitcheg_vel2delay,
106 pitcheg_vel2attack, pitcheg_vel2hold, pitcheg_vel2decay,
107 pitcheg_vel2sustain, pitcheg_vel2release, pitcheg_depth
108 - implemented opcodes pitchlfo_delay, pitchlfo_freq,
109 pitchlfo_depth, fillfo_delay, fillfo_freq, fillfo_depth,
110 amplfo_delay, amplfo_freq, amplfo_depth
111 - implemented opcodes fileg_delay, fileg_start, fileg_attack,
112 fileg_hold, fileg_decay, fileg_sustain, fileg_release, fileg_vel2delay,
113 fileg_vel2attack, fileg_vel2hold, fileg_vel2decay, fileg_vel2sustain,
114 fileg_vel2release
115 - implemented opcode lfoN_wave
116 - implemented opcode pitchlfo_depthccN
117 - implemented opcodes lfoN_phase, lfoN_phase_onccX,
118 lfoN_pitch, lfoN_pitch_onccX
119 - implemented opcodes pitchlfo_fade,
120 fillfo_fade, amplfo_fade, lfoN_fade, lfoN_fade_onccX
121 - implemented opcodes fillfo_freqccN,
122 pitchlfo_freqccN, amplfo_freqccN, lfoN_freq_onccX
123 - implemented opcodes ampeg_delayccN, ampeg_startccN,
124 ampeg_attackccN, ampeg_holdccN, ampeg_decayccN, ampeg_sustainccN,
125 ampeg_releaseccN, egN_timeX_onccY, egN_levelX_onccY
126 - lfoN_* and egN_* opcodes defined in group sections
127 are now taken into account
128 - implemented curves
129 - implemented opcodes volume_onccN, volume_curveccN
130 - implemented opcode volume_smoothccN
131 - implemented opcodes fillfo_depthccN, amplfo_depthccN,
132 lfoN_volume, lfoN_volume_onccX, lfoN_volume_smoothccX,
133 lfoN_freq_smoothccX, lfoN_pitch_smoothccX, lfoN_pan_onccX,
134 lfoN_pan_smoothccX, lfoN_cutoff_onccX, lfoN_cutoff_smoothccX,
135 lfoN_resonance_onccX, lfoN_resonance_smoothccX, lfoN_delay_onccX
136 - implemented opcode end
137 - implemented opcodes egN_amplitude_onccX,
138 egN_volume, egN_volume_onccX, egN_cutoff, egN_cutoff_onccX,
139 egN_pitch, egN_pitch_onccX, egN_resonance, egN_resonance_onccX
140 - implemented opcodes xfin_lokey, xfin_hikey,
141 xfout_lokey, xfout_hikey, xf_keycurve, xfin_lovel, xfin_hivel,
142 xfout_lovel, xfout_hivel, xf_velcurve, xfin_loccN, xfin_hiccN,
143 xfout_loccN, xfout_hiccN, xf_cccurve
144 - implemented opcodes pan_onccN, pan_smoothccN,
145 pan_curveccN, egN_pan, egN_pan_curve, egN_pan_onccX,
146 egN_pan_curveccX, pitch_veltrack
147 - when failed to parse a sfz file
148 print the line number on which the error occurs
149 - use common pool of CC objects to minimize RAM usage
150 - implemented opcodes amplfo_delay_onccN,
151 amplfo_fade_onccN, fillfo_delay_onccN, fillfo_fade_onccN,
152 pitchlfo_delay_onccN, pitchlfo_fade_onccN
153 - implemented opcodes fileg_delay_onccN,
154 fileg_start_onccN, fileg_attack_onccN, fileg_hold_onccN,
155 fileg_decay_onccN, fileg_sustain_onccN, fileg_release_onccN,
156 fileg_depth_onccN, pitcheg_delay_onccN, pitcheg_start_onccN,
157 pitcheg_attack_onccN, pitcheg_hold_onccN, pitcheg_decay_onccN,
158 pitcheg_sustain_onccN, pitcheg_release_onccN, pitcheg_depth_onccN
159 - implemented automatic aliasing *ccN <-> *_onccN
160 - *lfo_freqccN wasn't working when the respective *lfo_freq
161 was not set or was set to zero
162 - lfoN_freq_onccX wasn't working when lfoN_freq
163 was not set or was set to zero
164 - implemented opcodes resonance_onccN, resonance_smoothccN,
165 resonance_curveccN, cutoff_smoothccN, cutoff_curveccN
166 - implemented opcodes fillfo_depthchanaft,
167 fillfo_freqchanaft, amplfo_depthchanaft, amplfo_freqchanaft,
168 pitchlfo_depthchanaft, pitchlfo_freqchanaft
169 - implemented opcodes pitch_onccN,
170 pitch_curveccN, pitch_smoothccN, pitch_stepccN
171 - implemented opcodes volume_stepccN, pan_stepccN,
172 cutoff_stepccN, resonance_stepccN, lfoN_freq_stepccX,
173 lfoN_volume_stepccX, lfoN_pitch_stepccX, lfoN_pan_stepccX,
174 lfoN_cutoff_stepccX, lfoN_resonance_stepccX
175 - implemented opcodes eq1_freq, eq2_freq, eq3_freq,
176 eq1_freqccN, eq2_freqccN, eq3_freqccN, eq1_bw, eq2_bw, eq3_bw,
177 eq1_bwccN, eq2_bwccN, eq3_bwccN, eq1_gain, eq2_gain, eq3_gain,
178 eq1_gainccN, eq2_gainccN, eq3_gainccN
179 - implemented opcodes delay, delay_onccN, delay_random,
180 delay_samples, delay_samples_onccN
181 - implemented opcodes egN_eq1gain, egN_eq2gain, egN_eq3gain,
182 egN_eq1gain_onccX, egN_eq2gain_onccX, egN_eq3gain_onccX, egN_eq1freq,
183 egN_eq2freq, egN_eq3freq, egN_eq1freq_onccX, egN_eq2freq_onccX,
184 egN_eq3freq_onccX, egN_eq1bw, egN_eq2bw, egN_eq3bw, egN_eq1bw_onccX,
185 egN_eq2bw_onccX, egN_eq3bw_onccX, lfoN_eq1gain, lfoN_eq2gain,
186 lfoN_eq3gain, lfoN_eq1gain_onccX, lfoN_eq2gain_onccX, lfoN_eq3gain_onccX,
187 lfoN_eq1gain_smoothccX, lfoN_eq2gain_smoothccX, lfoN_eq3gain_smoothccX,
188 lfoN_eq1gain_stepccX, lfoN_eq2gain_stepccX, lfoN_eq3gain_stepccX,
189 lfoN_eq1freq, lfoN_eq2freq, lfoN_eq3freq, lfoN_eq1freq_onccX,
190 lfoN_eq2freq_onccX, lfoN_eq3freq_onccX, lfoN_eq1freq_smoothccX,
191 lfoN_eq2freq_smoothccX, lfoN_eq3freq_smoothccX, lfoN_eq1freq_stepccX,
192 lfoN_eq2freq_stepccX, lfoN_eq3freq_stepccX, lfoN_eq1bw, lfoN_eq2bw,
193 lfoN_eq3bw, lfoN_eq1bw_onccX, lfoN_eq2bw_onccX, lfoN_eq3bw_onccX,
194 lfoN_eq1bw_smoothccX, lfoN_eq2bw_smoothccX, lfoN_eq3bw_smoothccX,
195 lfoN_eq1bw_stepccX, lfoN_eq2bw_stepccX, lfoN_eq3bw_stepccX
196 - implemented opcodes eq1_vel2freq, eq2_vel2freq,
197 eq3_vel2freq, eq1_vel2gain, eq2_vel2gain, eq3_vel2gain
198 - sfz parser: allow double spaces in sample filenames
199 - sfz parser: allow absolute paths for sample filenames
200 - use linear decay and release for filter and pitch EG
201 - bugfix: only the first amp_veltrack definition in a file was
202 used
203 - bugfix: looping was disabled if loop_start was set to 0
204 - allow regions with end=-1 to turn off other regions using the
205 group and off_by opcodes (#168)
206 - made end=0 play the whole sample
207 - fixed support for lochan and hichan opcodes (#155)
209 * SoundFont format engine:
210 - Initial implementation (not usable yet)
211 - RT-safeness: avoid malloc in audio thread
212 - fixed a bug that could cause voice stealing to fail
213 - fine-tuned amplitude EG (by switching from gig to sfz EG)
214 - initial implementation of Vibrato LFO and Modulation LFO
215 - initial implementation of cutoff filter
216 - use linear decay and release for filter and pitch EG
218 * Gigasampler format engine:
219 - bugfix: pitch LFO controller "internal+aftertouch" was broken
220 - bugfix: filter keyboard tracking was broken
221 - filter performance fix (an unnecessary copy was made of the
222 filter parameters in each sub fragment)
224 * Host plugins:
225 - AU bugfix: failed to destroy its audio/MIDI devices
226 - Listen to all interfaces on Mac OS X (INADDR_ANY)
227 - VST bugfix: If the host called resume() before and after
228 changing sample rate or block size, the number of channels was
229 incorrectly set to two. This caused silence in Cubase 5.
230 - save engine type (gig, sfz or sf2) in plugin state
231 - VST: when opening Fantasia, look for both 32 and 64 bit Java on
232 64 bit Windows
233 - AU: changed number of output channels from one stereo to 16
234 stereo
235 - VST: made it possible to build the VST plugin for Mac
236 - AU: link AU plugin dynamically if --disable-shared isn't
237 specified
238 - VST bugfix: instrument loading hang and crashed the host when
239 the plugin was loaded a second time (#174)
240 - plugin bugfix: instrument loading hang when the plugin was
241 loaded a second time (this time it's for Linux and Mac, previous
242 similar fix was for Windows)
243 - thread safety fixes for the instrument loading thread
245 * MIDI driver:
246 - ALSA MIDI driver supports now "NAME" device parameter, for overriding
247 the ALSA sequencer client name
248 - removed limit of maximum amount of MIDI ports per MIDI device, since
249 there is no reason for this limit
250 - MME: fixed memory handling bug found with cppcheck
251 - MME: removed compiler warning
253 * audio driver:
254 - ASIO driver fixes for newer gcc versions (fix from PortAudio)
256 * LSCP server:
257 - added support for sending MIDI CC messages via LSCP command
258 "SEND CHANNEL MIDI_DATA CC <sampler-chan> <ctrl> <val>"
259 - added LSCP command "GET AVAILABLE_EFFECTS"
260 - added LSCP command "LIST AVAILABLE_EFFECTS"
261 - added LSCP command "GET EFFECT INFO <effect-index>"
262 - added LSCP command "CREATE EFFECT_INSTANCE <effect-index>"
263 - added LSCP command
264 "CREATE EFFECT_INSTANCE <effect-system> <module> <effect-name>"
265 - added LSCP command "DESTROY EFFECT_INSTANCE <effect-instance>"
266 - added LSCP command "GET EFFECT_INSTANCES"
267 - added LSCP command "LIST EFFECT_INSTANCES"
268 - added LSCP command "GET EFFECT_INSTANCE INFO <effect-instance>"
269 - added LSCP command
270 "GET EFFECT_INSTANCE_INPUT_CONTROL INFO <effect-instance> <input-control>"
272 <effect-instance> <input-control> <value>"
273 - added LSCP command "GET SEND_EFFECT_CHAINS <audio-device>"
274 - added LSCP command "LIST SEND_EFFECT_CHAINS <audio-device>"
275 - added LSCP command "ADD SEND_EFFECT_CHAIN <audio-device>"
276 - added LSCP command
277 "REMOVE SEND_EFFECT_CHAIN <audio-device> <effect-chain>"
278 - added LSCP command
279 "GET SEND_EFFECT_CHAIN INFO <audio-device> <effect-chain>"
280 - added LSCP command "APPEND SEND_EFFECT_CHAIN EFFECT <audio-device>
281 <effect-chain> <effect-instance>"
282 - added LSCP command "INSERT SEND_EFFECT_CHAIN EFFECT <audio-device>
283 <effect-chain> <effect-chain-pos> <effect-instance>"
284 - added LSCP command "REMOVE SEND_EFFECT_CHAIN EFFECT <audio-device>
285 <effect-chain> <chain-pos>"
286 - added LSCP command "SET FX_SEND EFFECT <sampler_channel>
287 <fx_send_id> <effect_chain> <chain_pos>"
288 - added LSCP command "REMOVE FX_SEND EFFECT <sampler_channel> <fx_send_id>"
293 * Bug fixes:
294 - Fixed crash which may occur when MIDI key + transpose is out of range
295 - minor valgrind fixes
296 - fixed crash which occurred when changing an already deployed sampler
297 channel to a different engine type
298 - fixed crash when deleting a sampler channel or changing engine
299 type while an instrument load was in progress
300 - bugfix: playing a note while changing the instrument could cause
301 a crash, or give "Handing back unknown region" error messages
302 - bugfix: calling SET VOICES (which Fantasia does on start and
303 refresh) could cause instruments to be unloaded
304 - Mac OS X: fixed name collision of enum in EffectControl and
305 wrong name of destructor in AudioOutputDeviceCoreAudio.cpp
306 - Mac OS X: fixed hanging threads
307 - Windows: disabled the previous thread fix on non-Mac systems, as
308 it caused hanging threads on Windows
309 - Fixed possible crashes due to corrupted MIDI/audio device list
310 after MIDI/audio device creation failure
311 - When creating MIDI instrument map entries with "PERSISTENT" type, the
312 instruments were uselessly precached with zero samples, however it still
313 took the full preloading time and on 1st program change the respective
314 instrument was completely reloaded again.
315 - fixed handling of rapid bank select and program change messages
316 sent to the same sampler channel (patch from the Open Octave
317 project, slightly adjusted)
318 - fixed crash when trying to create an effect instance with controls
319 which min and/or max values depend on the sample rate
320 - fixed bug #162
321 - bugfix: LADSPA_PATH was not evaluated correctly when containing
322 multiple paths (#165)
323 - thread safety fixes for the instrument loading thread
324 - bugfix: instrument loading crashed for sfz and sf2 in Ardour
325 (#176)
326 - more thread safety fixes for the instrument loading thread
327 - sfz/sf2 engine: fixed crash when using small audio fragment size
329 Version 1.0.0 (31 July 2009)
331 * packaging changes:
332 - autoconf bugfix: the PKG_CONFIG variable wasn't initialized properly,
333 causing e.g. the libgig test to fail when
334 "./configure --disable-jack-driver" was used
335 (patch by Alexis Ballier)
336 - fixed compilation with gcc 4.3
337 - fixes for building on OS X (thanks to Ebrahim Mayat for testing)
338 - fixed configure so it detects x86_64 (#107)
339 - fixes for building with newer MinGW versions
340 - fix for building with bison 2.4 (#111)
341 - fixed building with libgig installed in a non-standard directory
342 - minor fix in configure for mmsystem.h detection on MinGW
343 - Windows: look for editor plugins and Fantasia using base
344 directory of liblinuxsampler dll (look in the same directory and one
345 directory above)
346 - configure script fix: removed unconditional use of SSE
347 - fixed building with sqlite installed in a non-standard directory
348 - when cross-compiling, don't try to create instruments.db
349 - fix for new mingw-w64 version, which has usleep
351 * general changes:
352 - bugfix: on some POSIX systems instrument editor plugins refused to
353 load as we used a non-portable Linux specific struct field
354 (fixes bug #70, patch by Ronald Baljeu)
355 - fixed endless loop which occured when loading an instrument editor
356 plugin DLL on Windows systems failed
357 - fixed memory leaks that occurred when liblinuxsampler was unloaded
358 - optimized the SynchronizedConfig class so it doesn't wait
359 unnecessarily long after an update
360 - added support for notifying instrument editors on note-on / note-off
361 events (e.g. to highlight the pressed keys on the virtual keyboard
362 of gigedit)
363 - added support for triggering notes by instrument editors (see above)
364 - be verbose on DLL load errors (on Linux)
365 - fixed di-harmonic triangle LFO implementation (this LFO implementation
366 is only used by very few systems, most pick the int math
367 implementation, which is usually faster)
368 - fixes for audio drivers with varying buffer sizes
369 - experimental support for running LinuxSampler as a DSSI, LV2 and
370 VST plugin
371 - notification events for stream/voice count statistics are now sent
372 only when there are actual changes
373 - added memory ordering constraints to improve stability on
374 multi-core and multi-cpu systems
375 - maximum voices and disk streams can now be altered at runtime
376 - fixed CPU feature detection on x86_64 (maybe fixes #108)
377 - automatic stacktrace mechanism is now turned off by default and can
378 be switched on by command line option "--stacktrace" (the automatic
379 stacktrace mechanism seems to be broken on most systems at the moment)
380 - C++ API method InstrumentManager::LaunchInstrumentEditor() now returns
381 a pointer to the launched InstrumentEditor object
382 - added optional 3rd party user data parameter for following
383 liblinuxsampler C++ API methods: InstrumentEditor::Main(),
384 InstrumentEditor::Launch(),
385 InstrumentManager::LaunchInstrumentEditor()
386 - theoretical fix: made SynchronizedConfig follow C++0x memory
387 model more strictly
388 - fixes for using large audio device buffers
389 - Windows: add the installation directory to the DLL search path
390 when loading an editor plugin (solves problems with VST and
391 gigedit on systems with other GTK versions installed)
393 * audio driver:
394 - removed the nonsense audio channel constraint (which was hard coded to
395 max. 100 audio channels) for most audio drivers
396 - JACK audio driver did not offer a device parameter "SAMPLERATE" as
397 opposed to the LSCP specs
398 - bugfix: the SAMPLERATE parameter of some drivers (e.g. JACK)
399 reflected the wrong value
400 - fixed a memory management bug in ASIO driver
401 - Makefile fix: JACK_CFLAGS wasn't used
402 - JACK: use jack_client_open instead of the deprecated
403 jack_client_new
404 - added (experimental) CoreAudio driver
405 - applied old fixes to the ASIO driver that were included in the
406 previous binary release but accidentally never committed to CVS
407 (fixes #117)
408 - fixes for ASIO on mingw-w64 (iasio wrapper is not needed on
409 win64)
410 - VST: added support for sample rate and buffer size changes
411 - VST: close editor (Fantasia) when the VST is removed
412 - VST: avoid opening Fantasia more than once for each VST instance
413 - VST: export main function as "main" on Linux too (fix for
414 energyXT)
415 - VST: changed number of output channels from one stereo to 16
416 stereo
417 - added channel routing, fxsends and midi maps to the settings
418 stored in the plugin state
419 - performance optimization of AudioChannel::MixTo() and
420 AudioChannel::CopyTo() methods using GCC vector exensions
421 (if available)
422 - ASIO fixes: avoid initializing the device twice, avoid throwing
423 exception when getting parameters from a disconnected device
425 * MIDI driver:
426 - added JACK MIDI driver
427 - dispatch bank select as ordinary CC as well, the user might seriously
428 want to (mis)use it for some purpose ("fixed" in all current MIDI
429 input drivers: ALSA, CoreMIDI, JACK, MidiShare, MME)
430 - bugfix: pitch bend wasn't working with JackMidi, VST, LV2, MME,
431 CoreMidi or AU
432 - fixed mingw-w64 compilation error in MME driver
433 - made program change handling in MIDI thread real-time safe by
434 moving the logic to a non-RT thread
435 - fixed minor memory leak in ALSA driver
437 * instruments database:
438 - avoid time consuming samples scanning when adding instruments
439 to the instruments database
440 - added support for handling lost files in the instruments database
441 - Implemented option for adding instruments in separate directories
442 in the instruments database
443 (patch by Chris Cherrett & Andrew Williams, a bit adjusted)
444 - work-around for missing fnmatch function on Windows to make
445 instrument database compilable
446 - added instrument database support on Windows
447 works with both standalone mode and VST plugin.
448 the instruments DB file is located in
449 %USERPROFILE%\.linuxsampler\instruments.db which allows different
450 databases for each windows user
451 if no DB is present it automatically creates the .linuxsampler subdir
452 and then creates an empty DB
453 - fixed recursive import, which was broken on Windows
455 * Gigasampler format engine:
456 - fixed a memory leak that could happen when a channel was deleted
457 while notes were playing
458 - made it possible to load an instrument even if the audio thread
459 isn't running
460 - added partial support for the "Controller Triggered" MIDI rule,
461 enough for piano gigs with pedal noise samples
462 - minor fix: only mark FX sends as being modified if really the
463 respective FX send MIDI controller was used
464 - added support for GM global device volume SysEx message
465 (can be selected at compile time to either apply globally to the
466 whole sampler [default] or only to the sampler channels that are
467 connected to the respective MIDI input port the SysEx message arrived
468 on)
469 - bugfix: notes triggered at position 0 in the audio buffer were
470 sometimes wrongly killed in the same buffer, causing no sound to
471 be played
472 - added support for chromatic / drumkit mode Roland GS Sysex message
473 which is usally used to switch a part between chromatic sounds and
474 drumkit sounds (as opposed to their common default setting of MIDI
475 part 10 being a drumkit part and all other ones chromatic parts), in
476 LS however one can switch between the first 16 MIDI instrument maps
477 defined for the sampler
478 - made it possible to create multiple sample channels even if the
479 audio thread isn't running
480 - fixed crash when removing channel with active voices (#116)
481 - bugfix: on sample reference changes (instrument editor), only
482 un-cache the respective sample if it's really not used by any
483 sampler engine anymore
484 - re-cache samples in case they were changed by an instrument editor,
485 e.g. when a sample was added while playing (#82)
486 - fixed hanging notes which occured when note-off event had the exact
487 same time stamp as the voice's note-on event and occured both in the
488 same audio fragment cycle (fixes bug #112)
489 - added support for the "fine tune" and "pitch bend range"
490 instrument-level gig parameters
491 - fixed minor artifacts in pitch bend handling
492 - added support for GS Reset SysEx message
493 - allow gig files to use unlimited downward pitch shifting
494 - added a limit check for upward pitch shifting
495 - bugfix: sometimes, when playing a note twice fast, the second
496 note was silent
497 - fixed crash happening when a pitch bend event arrived at the
498 same time a new instrument was loading
500 * LSCP server:
501 - added new LSCP event "CHANNEL_MIDI" which can be used by frontends to
502 react on MIDI data arriving on certain sampler channels (so far only
503 Note-On and Note-Off events are sent via this LSCP event)
504 - added new LSCP event "DEVICE_MIDI" which can be used by frontends to
505 react on MIDI data arriving on certain MIDI input devices (so far only
506 Note-On and Note-Off events are sent via this LSCP event)
507 - added new LSCP commands: FIND LOST DB_INSTRUMENT_FILES and
509 - added new LSCP command: SEND CHANNEL MIDI_DATA which can be used by
510 frontends to send MIDI messages to specific sampler channel
511 - added two additional fields to GET FILE INSTRUMENT INFO command -
513 - bugfix: the bank number provided by MIDI_INSTRUMENT_INFO notifications
514 was incorrect
515 - Optimized the retrieval of the MIDI instrument mappings
516 - added new LSCP command "SET VOICES" to globally alter the maximum
517 amount of voices, added new LSCP event "GLOBAL_INFO:VOICES" which will
518 be triggered respectively
519 - added new LSCP command "SET STREAMS" to globally alter the maximum
520 amount of disk streams, added new LSCP event "GLOBAL_INFO:STREAMS"
521 which will be triggered respectively
522 - bugfix: retry if "select" returns EINTR (this fixes a crash when
523 a gigedit file dialog is opened)
524 - close all connections when LSCPServer is deleted
525 - hard close of all sockets on exit
526 - bugfix: SET CHANNEL MIDI_INPUT_TYPE didn't work with the MME
527 driver
529 * Bug fixes:
530 - fixed a crash which occurs when removing a sampler channel waiting
531 to start instrument loading after another channel
532 - fixed a crash which occurs when removing a sampler channel with
533 instrument loading in progress (bug #113)
534 - fixed termination caused by uncaught exception when adding MIDI
535 instrument with PERSISTENT load mode
536 - fixed possible iterator invalidations when resetting the sampler
537 - fixed memory leaks when issuing the following LSCP commands:
542 - fixed possible compilation error when sqlite is not present
543 - fixed orphaned pointers when setting maximum voices limit (bug #118)
544 - fixed crash when changing the audio output device of a sampler
545 channel with loaded instrument and start playing notes
546 - fixed endless loop in Engine::SuspendAll() (bug #120)
547 - fixed a low-level atomic load function that was broken on 64-bit
548 PowerPC, which probably could cause crashes on that platform
549 - fixed a memory management error which could cause a crash when a
550 plugin was unloaded
551 - bugfix: two private structs had the same name, which could cause
552 problems if the linker chose the wrong constructor
553 - fixed low-level ConditionServer usage bug that caused lockups on
554 Windows
557 Version 0.5.1 (6 December 2007)
559 * packaging changes:
560 - added autoconf checks for pthread library
561 - added autoconf check for pthread bug found on certain NPTL-enabled
562 glibc versions (see Gentoo bug report #194076)
563 - added autoconf checks for MS Windows
565 * general changes:
566 - bugfix: the thread used by an editor plugin didn't die when the
567 editor closed
568 - bugfix: Ringbuffer.h: fill_write_space_with_null() did not zero
569 out all the space. operator--() did not apply size_mask after
570 decrementing the read_ptr. DEFAULT_WRAP_ELEMENTS set to 0 in
571 order to avoid problems with the _NonVolatileReader functions.
572 - bugfix: Stream.h: added a missing divide by BytesPerSample in
573 GetWriteSpace(). Since this function is currently only used in
574 the stream's qsort() compare function, it didn't trigger any
575 bugs.
576 - Resampler.h, Synthesizer.h: cubic interpolation now works in
577 24bit mode too. Faster method to read 24bit words on little
578 endian machines (x86): replaced 3 byte reads + shifts with a 1
579 unaligned 32bit read and shift
580 - experimental support for MS Windows (MIDI input via MME, AUDIO
581 output via ASIO)
582 - made handling of SIGINT signal (Ctrl-C) a bit more robust
583 - support for monitoring the total number of active disk streams
584 (new LSCP commands: GET TOTAL_STREAM_COUNT,
587 * AUDIO driver:
588 - added Windows ASIO low latency audio driver
590 * MIDI driver:
591 - added MME Windows MIDI driver
593 * LSCP server:
594 - added support for Windows style path / filenames, however with
595 forward slash path separators instead of backslash
596 (i.e. "C:/foo/bar.gig")
597 - allow naughty liblscp to send non-string device parameters within
598 apostrophes as well
599 - added new LSCP commands: "GET FILE INSTRUMENTS <file>",
600 "LIST FILE INSTRUMENTS <file>" and
601 "GET FILE INSTRUMENT INFO <file> <index>" for retrieving informations
602 about an arbitrary instrument file on the system where the sampler is
603 running on
605 Version 0.5.0 (15 October 2007)
607 * packaging changes:
608 - config.h is not going to be installed along with liblinuxsampler's
609 API header files anymore
610 - only the API relevant header (and source) files will be exported to
611 the Doxygen API documentation (explicitly listed in Doxyfile.in)
612 - added completely new XCode project files for Mac OSX which is now
613 capable to execute our autoconf environment, thus no need anymore
614 to maintain the compile time configuration file (osx/version.h) for
615 OSX manually (patch by Toshi Nagata)
616 - fixed buggy boolean --enable-foo / --disable-foo configure script
617 parameters
618 - global.h now only covers global definitions that are needed for the
619 C++ API header files, all implementation internal global definitions
620 are now in global_private.h
621 - atomic.h is not exposed to the C++ API anymore
622 - no need to include config.h anymore for using LS's API header files
623 - fixed warnings in API doc generation
625 * general changes:
626 - replaced the old, confusing MIDI program change mechanism by a
627 flexible MIDI instrument mapper which allows to map arbitrary
628 (MIDI bank, MIDI program) pairs with arbitrary
629 (engine type, instrument file, file index) triplets which will be
630 loaded on the respective channel when such MIDI program change
631 messages arrive, beside that, each entry allows to define a life-time
632 strategy for the instrument, so the user can define whether the
633 instrument should i.e. be permanently loaded (to be able to switch
634 quickly among sounds) or i.e. loaded just on demand when the
635 respective program change arrives (to safe RAM space), as well as a
636 global volume factor for each entry, so the user can adjust the volume
637 dynamic of his mapped instrument collection without having to modify
638 the instrument files, also one can manage arbitrary amount of such
639 MIDI instrument maps and assign each sampler channel individually
640 a certain map, so that i.e. separation of normal instruments and
641 drumkits is possible
642 - new notification events for tracking changes to audio/MIDI devices,
643 MIDI instrument maps, MIDI instruments, FX sends, global volume.
644 - sampler was limited to load max. 200 instruments in the background
645 due to a constant size RingBuffer FIFO which is now replaced by a
646 dynamic (unlimited) size std::list FIFO
647 - added FX sends, these allow to route audio signals to arbitrary audio
648 output channels for being processed by external effect processors
649 (i.e. jack-rack), the send levels are controllable via arbitrary MIDI
650 controllers
651 - global (sampler wide) volume can now be controlled at runtime
652 - Implemented new, improved notification system
653 - fixed compilation errors regarding OSX
654 (patch by Toshi Nagata)
655 - implemented instruments database
656 - added support for escape sequences to the instruments database
657 - added highly experimental support for on-the-fly instrument editing
658 within the sampler's process (by using instrument editor plugins),
659 you'll notice the new "Registered instrument editors:" message on
660 startup, added a new LSCP command:
661 "EDIT CHANNEL INSTRUMENT <sampler-channel>"
662 to spawn a matching instrument editor for the instrument on the
663 given sampler channel, the plugin path can be overridden at compile
664 time with ./configure --enable-plugin-dir=/some/dir
665 - added experimental code for synchronizing instrument editors hosted
666 in the sampler's process to safely edit instruments while playing
667 without a crash (hopefully) by either suspending single regions
668 wherever possible or if unavoidable whole engine(s)
669 - fixed several issues in fundamental "Thread" class: set scheduling
670 policy and priority on thread level, set a minimum stack size for
671 thread (TODO: a reasonable value yet to be tested), bugfix: non-RT
672 threads simply inherited properties of starting thread instead of
673 setting their own policy and priority
674 - minor fix in our automatic stack trace mechanism on crashes, the
675 main process did not wait for the stack trace process to finish
676 its output
677 - fixed some minor memory leaks
678 - reenabled assembly features support, at the moment only for
679 enabling a fast denormal FPU mode (x86 platforms supporting SSE2)
680 - minor assembly fix in x86 features detection (don't use the PIC
681 register, to avoid relocations in the text segment at runtime)
682 - POSIX callback functions of Thread.h are hidden
684 * MIDI driver:
685 - dispatch bank select (MSB and LSB) messages
687 * audio driver:
688 - the ALSA audio output driver parameters now reflect the correct
689 parameter value ranges for the respective selected sound card
690 (patch by Till Wimmer, a bit fixed and extended)
692 * Gigasampler format engine:
693 - if a filter is used and EG2 finishes before EG1, let the voice
694 die when EG2 has finished (this fixes a problem with clicks and
695 voice starvation for some gigs)
696 - playback is no longer disabled during instrument loading
697 - all notes playing on a channel that changes its instrument keep
698 playing with the old instrument until they get a note off
699 command
700 - EG fix: a release value of zero could cause noises or crash
701 - handle MIDI coarse tuning messages (MIDI RPN #0 MSB #2 LSB)
702 - EG fine tuning: when attack is zero the EG starts at a level
703 above max sustain level, which means that there is a decay phase
704 even if sustain is 100%
705 - more EG fixes: the level could sometimes go below zero and cause
706 noises or crashes
707 - minor fix of EGDecay (patch by Toshi Nagata)
708 - fixed compiler error when --enable-override-filter-type was
709 supplied to the configure script (fixes #46)
710 - disk thread: queue sizes are now proportional to CONFIG_MAX_STREAMS
711 instead of a fix value
712 - behavior fix: on MIDI CC# 65 (portamento on / off), 126 (mono mode),
713 127 (solo mode) only kill voices if the respective mode really
714 changed
716 * LSCP server:
717 - fixed compile time error for old Bison versions
718 (i.e. v1.28 found on MacOS 10.4, patch by Toshi Nagata)
719 - parser now supports extended ASCII character set
720 (up to ASCII code 255, i.e. includes now umlauts and accents)
721 - filename arguments in LSCP commands now allow to use escape
722 sequences, that is directly literal as one of: \', \", \\, \n, \r,
723 \f, \t, \v, or as octal ASCII code value like \132, or as hex ASCII
724 code value like \xf2) (fixes bug #24)
725 - the following LSCP commands now also support escape sequences for at
726 least one of their text-based parameters (i.e. name, description):
733 - returns verbose syntax errors (line and column where syntax error
734 occured, the unexpected character and the actually expected, possible
735 character(s), the latter only if less than 5 possibilities)
736 - made sure that LSCP syntax is not affected by gigedit locale
737 settings
738 - bugfix regarding strings parameter lists: all comma separated lists
739 of strings were treated as being one string containing commas
740 (fixes #57)
742 * Bug fixes:
743 - fixed crash occurring on certain LSCP scripts (Bug 39)
744 - another thread safety fix for lscp "load engine" and "set
745 channel audio output device"
746 - fixed a crash which occurs when reassigning the same engine
747 on a sampler channel with connected MIDI device
748 - fixed a crash which occurs when changing the number of ports of a MIDI
749 device connected to a sampler channel to number less then or equal
750 to the index of the port to which the sampler channel is connected.
751 - The previous bindings were not been disconnected when altering
752 the ALSA_SEQ_BINDINGS parameter. Introduced a NONE keyword for
753 unsubscribing from all bindings (e.g. ALSA_SEQ_BINDINGS=NONE).
754 - The active stream/voice count statistic was incorrect.
755 - notification events were not been sent for some sampler
756 channel changes
757 - added default min and max values to restrict the number of allowed
758 audio output channels and MIDI input ports
759 - the connection to the PCM interface is now closed when destroying
760 an audio output device
761 - files with slash in their path or filename could not be loaded
763 * test cases:
764 - updated and fixed (haven't been touched in a while)
766 Version 0.4.0 (24 November 2006)
768 * packaging changes:
769 - changed deprecated copyright attribute to license; added ldconfig
770 to post-(un)install steps; added devel package for liblinuxsampler;
771 to linuxsampler.spec (RPM)
772 - install necessary development header files for allowing 3rd party
773 applications to link against liblinuxsampler
774 - liblinuxsampler's API documentation can be generated with 'make docs'
775 (Doxygen required)
776 - added benchmark to automatically detect the best triangle LFO
777 implementation (currently either an integer math solution or a
778 di-harmonic approximation), automatic detection can be overriden
779 with --enable-signed-triang-algo=x and --enable-unsigned-triang-algo=x
780 configure script argument though (mandatory for cross-compilation)
781 - do not automatically pick optimized gcc flags if the user already
782 provided some on his own (as CXXFLAGS)
783 - added compile time option to disable processing of All-Notes-Off MIDI
784 messages
785 - added compile time options to allow disabling the various audio and
786 MIDI drivers
787 - fixed automatic GCC CPU switch detection on PPC
788 (patch by Ebrahim Mayat)
790 * Gigasampler format engine:
791 - extensive synthesis optimization
792 (reimplementation of EGs and LFO(s), removed synthesis parameter
793 prerendering and the synthesis parameter matrix in general, splitting
794 each audio fragment into subfragments now where each subfragment uses
795 constant pitch and filter coefficients. The volume coefficient is
796 linearly interpolated inside a subfragment, unless
797 --disable-interpolate-volume is set.)
798 - fine tuning of the EG modulation parameters
799 - improved filter cutoff calculation by adding support for the
800 following gig parameters: Cutoff freq (used when no cutoff
801 controller is defined), Control invert, Minimum cutoff, Velocity
802 curve and Velocity range. The keyboard tracking now scales
803 cutoff frequency instead of resonance.
804 - added support for gig parameter Resonance.
805 - fixed bug in sysex handling (patch by Juan Linietsky)
806 - added global volume attenuation of -9 dB (0.35f) to prevent clipping
807 which can be overridden with --enable-global-attenuation
808 - EG fixes: made the length of "attack hold" stage more
809 accurate. Release stage can now start before attack stage
810 ends. Cancel release didn't work when sustain was zero. Attack
811 time now has a minimal value to prevent clicks.
812 - fixed pitch changes larger than one octave
813 - fixed EG3 (pitch envelope) synthesis which was neutral all the time
814 - implemented portamento mode and solo mode (a.k.a 'mono mode'):
815 all modes can be altered via standard GM messages, that is CC5 for
816 altering portamento time, CC65 for enabling / disabling portamento
817 mode, CC126 for enabling solo mode and CC127 for disabling solo mode
818 - fine tuning of the curves for volume (CC7), pan (CC10 and gig
819 parameter) and crossfade
820 - added support for the "attenuation controller threshold" gig
821 parameter
822 - added smoothing of volume changes caused by control change
823 messages
824 - sample loop parameters are now taken from the DimensionRegion
825 instead of the wave chunk
826 - fixed keyswitching for v3 gigs with a number of keyswitch splits
827 not equal to a power of two
828 - reimplementation of the filter algorithm. The new filter is more
829 accurate and supports all gig filter types, including bandreject
830 and lowpass turbo.
831 - real support for 24 bit samples - samples are not truncated to
832 16 bits anymore
833 - support for aftertouch (channel pressure, not polyphonic
834 aftertouch)
835 - LFO1 behaviour fixed (dampening from max volume instead of
836 amplifying from 0)
838 * LSCP server:
839 - fixed application exit on broken pipe error (fixes bug #20)
840 - fixed the notification messages delay due to lack of
841 network activity (fixes bug #26)
842 - fixed parser bug which occured on space(s) within device parameters
845 * audio driver:
846 - added aRts audio output driver (by no means RT safe)
848 * MIDI driver:
849 - fixed legacy sysex code which caused dispatching of MIDI SysEx
850 messages several times instead of once
851 - API extension for MIDI drivers which already supply exact time stamps
852 for events (i.e. for offline rendering based MIDI drivers)
853 - added checks for bad MIDI data
855 * linuxsampler application:
856 - show available sampler engine types on startup
858 * general changes:
859 - support for muting sampler channels and solo mode of the same, two new
860 LSCP commands ("SET CHANNEL MUTE" and "SET CHANNEL SOLO") and two new
861 fields ("MUTE" and "SOLO") for command "GET CHANNEL INFO" were
862 introduced for this, the behavior is the same like on a mixer console
863 (patch by Grigor Iliev, a bit adjusted). Also added configure option
864 --enable-process-muted-channels which can be used to enable the
865 processing of muted channels.
866 - support for sostenuto pedal
867 - support for monitoring the total number of active voices
870 - fixed some memory management errors
871 - fixed some concurrency problems that could lead to crashes when
872 LSCP commands were executed
873 - fixed crash when instrument loading failed previously on the same
874 sampler channel (fixes bug #36)
876 Version 0.3.3 (15 July 2005)
878 * packaging changes:
879 - fixed compilation with gcc 4.0
881 * Gigasampler format engine:
882 - LFO preprocessing was performed even though the respective LFO was
883 disabled by the instrument patch (minor efficiency fix)
884 - if period time of chosen audio device is too small (< MIN_RELEASE_TIME)
885 for volume ramp downs in the same fragment (needed for current voice
886 stealing implementation) then simply inform the user with a warning
887 about possible click sounds and reduce the volume ramp down
888 appropriately instead of cancelling the audio device connection
890 Version 0.3.2 (24 June 2005)
892 * packaging changes:
893 - updated autotools build files to compile on OS X
894 (conditional compilation of CoreMIDI and MidiShare drivers)
895 - hand-crafted assembly optimization code can be disabled with
896 './configure --disable-asm' (definitely not recommended)
897 - fixed 'make dist' rule to include all necessary files
898 - require automake (>= 1.5) for 'make -f Makefile.cvs'
899 (due to 'dist-bzip2' automake option)
901 * Gigasampler format engine:
902 - support for the gig parameters for "release velocity response" curves
903 - fine tuning of the EGADSR envelope
904 - volume of release triggered samples now depends on note-on velocity,
905 note length and gig parameter "release trigger decay" instead of
906 note-off velocity.
907 - revised voice stealing
908 (fixes crash and endless loop caused by voice stealing)
909 - don't reset scale tuning on instrument or audio output device change
910 - handle key group conflicts right at the beginning of each fragment
911 instead of when the respective voice is actually launched
912 (fixes undefined behavior if stolen voices belonged to a key group -
913 this case was followed by a "killed voice survived" error message)
914 - fixed minor issue with null/silence samples
915 (those stole voices even though they don't need a voice at all which
916 resulted in "voice stealing didn't work out" messages)
917 - don't reset volume, pan, pitch and MIDI controller values on
918 instrument or audio output device change
920 * LSCP server:
921 - fixed some crashes (patch by Grigor Iliev, fixes #19)
922 - fixed LSCP event "CHANNEL_INFO" notification
923 (e.g. did not notify on volume changes or MIDI program change events)
925 * linuxsampler application:
926 - added command line parameters --lscp-addr and --lscp-port to override
927 default IP address and port of LSCP server
929 Version 0.3.1 (24 May 2005)
931 * initial release

  ViewVC Help
Powered by ViewVC