/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Annotation of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1560 - (hide annotations) (download)
Thu Dec 6 17:19:16 2007 UTC (16 years, 3 months ago) by schoenebeck
Original Path: linuxsampler/trunk/configure.in
File size: 48562 byte(s)
* minor code refactoring of win32 Condition code
* preparations for release 0.5.1

1 schoenebeck 9 AC_INIT(configure.in)
2 schoenebeck 697
3     #------------------------------------------------------------------------------------
4     # LinuxSampler's / liblinuxsampler's "official" release version:
5    
6     LINUXSAMPLER_RELEASE_MAJOR=0
7 schoenebeck 1424 LINUXSAMPLER_RELEASE_MINOR=5
8 schoenebeck 1560 LINUXSAMPLER_RELEASE_BUILD=1
9 schoenebeck 697
10     #------------------------------------------------------------------------------------
11     # The following is the libtool / shared library version. This doesn't have to
12     # do anything with the release version. It MUST conform to the following rules:
13     #
14     # 1. Start with version information of `0:0:0' for each libtool library.
15     # 2. Update the version information only immediately before a public release of
16     # your software. More frequent updates are unnecessary, and only guarantee
17     # that the current interface number gets larger faster.
18     # 3. If the library source code has changed at all since the last update, then
19     # increment revision (`c:r:a' becomes `c:r+1:a').
20     # 4. If any interfaces have been added, removed, or changed since the last update,
21     # increment current, and set revision to 0.
22     # 5. If any interfaces have been added since the last public release, then increment
23     # age.
24     # 6. If any interfaces have been removed since the last public release, then set age
25     # to 0.
26    
27 schoenebeck 1560 LIBLINUXSAMPLER_LT_CURRENT=2
28 schoenebeck 697 LIBLINUXSAMPLER_LT_REVISION=0
29 schoenebeck 1560 LIBLINUXSAMPLER_LT_AGE=1
30 schoenebeck 697 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31    
32 schoenebeck 947 #------------------------------------------------------------------------------------
33     # the LSCP specification version this LinuSampler release complies with:
34    
35     LSCP_RELEASE_MAJOR=1
36 schoenebeck 1525 LSCP_RELEASE_MINOR=3
37 schoenebeck 947
38     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40    
41 schoenebeck 697 AM_PROG_LIBTOOL
42    
43     AC_SUBST(SHLIB_VERSION_ARG)
44     AC_SUBST(SHARED_VERSION_INFO)
45    
46 schoenebeck 12 AC_C_BIGENDIAN
47 schoenebeck 9 AC_CANONICAL_SYSTEM
48    
49 schoenebeck 80 AC_SUBST(target)
50     AC_SUBST(target_alias)
51     AC_SUBST(target_cpu)
52     AC_SUBST(target_os)
53     AC_SUBST(target_vendor)
54 schoenebeck 18
55 schoenebeck 275
56 schoenebeck 554 ###########################################################################
57     # General Checks
58 schoenebeck 275
59 schoenebeck 510 AC_MSG_CHECKING([whether x86 architecture])
60 schoenebeck 9 def_arch_x86=0
61     case $target_cpu in
62     "i386" | "i486" | "i586" | "i686" | "i786")
63     echo "yes"
64     def_arch_x86=1;;
65     *)
66     echo "no";;
67     esac
68     AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
69    
70 schoenebeck 510 # determine the right gcc switch for CPU specific optimizations
71 schoenebeck 829 # (only if the user did not provide one)
72 schoenebeck 510 CXX_CPU_SWITCH=
73 schoenebeck 829 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
74     if test "$def_arch_x86" = 1; then
75     CXX_CPU_SWITCH="-march=$target_cpu"
76 schoenebeck 909 elif test "$target_cpu" = "ppc"; then
77 schoenebeck 829 CXX_CPU_SWITCH="-arch=$target_cpu"
78     fi
79 schoenebeck 510 fi
80     AC_SUBST([CXX_CPU_SWITCH])
81    
82 senoner 1502 # check if we're on MS Windows
83     AC_CHECK_HEADERS(
84     mmsystem.h,
85     have_windows=1,
86     have_windows=0
87     )
88     AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
89    
90 schoenebeck 288 AC_MSG_CHECKING([whether UNIX98 compatible])
91     AC_LANG_SAVE
92     AC_LANG_C
93     AC_TRY_RUN([
94     #ifndef _GNU_SOURCE
95     #define _GNU_SOURCE 1
96     #endif
97     #include <features.h>
98     void main(void) {
99     #if _XOPEN_SOURCE >= 500
100     exit(0); /* UNIX98 compatible */
101     #else
102     exit(-1); /* not UNIX98 compatible */
103     #endif
104     }
105     ],
106     have_unix98="yes",
107     have_unix98="no",
108     have_unix98="no"
109     )
110     AC_LANG_RESTORE
111     AC_MSG_RESULT([$have_unix98])
112 senoner 1502 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
113 schoenebeck 288 if test "x$HAVE_UNIX98" = "x"; then
114     echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
115     echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
116     echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
117     echo "have a UNIX98 compatible system."
118     exit -1;
119     fi
120     fi
121    
122 wylder 822 # check for <features.h>
123     AC_CHECK_HEADERS(features.h)
124 wylder 821
125 schoenebeck 1454 # test for POSIX thread library
126     m4_ifdef([m4_include(m4/pthread.m4)],,
127     [sinclude([m4/pthread.m4])])
128     ACX_PTHREAD
129     LIBS="$PTHREAD_LIBS $LIBS"
130     CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
131     CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
132     CC="$PTHREAD_CC"
133 schoenebeck 852
134 schoenebeck 1454 # check for a bug in NPTL-enabled glibc
135     # (see Gentoo bug report #194076)
136     AC_ARG_ENABLE(nptl-bug-check,
137     [ --disable-nptl-bug-check
138     Disable check for a bug in certain NPTL-enabled
139     glibc versions that caused crashs.],
140     [config_check_nptl_bug="$enableval"],
141     [config_check_nptl_bug="yes"]
142     )
143     if test "$config_check_nptl_bug" = "yes"; then
144     m4_ifdef([m4_include(m4/nptl_bug.m4)],,
145     [sinclude([m4/nptl_bug.m4])])
146     ACX_NPTL_GLIBC_BUG([
147     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
148     echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
149     echo "probably crash due to this. Please report us the system you are"
150     echo "using and/or file a bug report to the bug tracking system of"
151     echo "your distribution."
152     echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
153     echo "well, you can try to circumvent this problem for now by setting"
154     echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
155     echo "should cause this test to pass."
156     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
157     AC_MSG_ERROR([possibly NPTL glibc bug detected])
158     ])
159     else
160     echo "NPTL glibc bug check disabled"
161     fi
162    
163    
164    
165 schoenebeck 852 ###########################################################################
166 schoenebeck 288 # Checks for available audio and MIDI systems / drivers
167     # (we throw an error if there's not at least one system for audio output and MIDI input available)
168 schoenebeck 852
169 schoenebeck 288 have_midi_input_driver="false"
170     have_audio_output_driver="false"
171    
172 schoenebeck 852 # ALSA
173     AC_ARG_ENABLE(alsa-driver,
174     [ --disable-alsa-driver
175     Disable support for the Advanced Linux Sound
176     Architecture (ALSA).],
177 schoenebeck 1360 [config_alsa_driver="$enableval"],
178 schoenebeck 852 [config_alsa_driver="yes"]
179 schoenebeck 18 )
180 schoenebeck 852 have_alsa=0
181     if test "$config_alsa_driver" = "yes"; then
182     AC_CHECK_HEADER(alsa/asoundlib.h,
183     AC_CHECK_LIB(asound, main,
184     have_alsa=1
185     ,
186     have_alsa=0
187     )
188     ,
189     have_alsa=0
190     )
191     if test "$have_alsa" = "1"; then
192     have_midi_input_driver="true"
193     have_audio_output_driver="true";
194     fi
195    
196     echo -n "checking Alsa version... "
197     AC_LANG_SAVE
198     AC_LANG_C
199     AC_TRY_RUN([
200     #include <alsa/asoundlib.h>
201     void main(void) {
202     /* ensure backward compatibility */
203     #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
204     #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
205     #endif
206     exit(SND_LIB_MAJOR);
207     }
208     ],
209     alsa_major=0,
210     alsa_major=$?,
211     alsa_major=0
212     )
213     AC_TRY_RUN([
214     #include <alsa/asoundlib.h>
215     void main(void) {
216     /* ensure backward compatibility */
217     #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
218     #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
219     #endif
220     exit(SND_LIB_MINOR);
221     }
222     ],
223     alsa_minor=0,
224     alsa_minor=$?,
225     alsa_minor=0
226     )
227     AC_TRY_RUN([
228     #include <alsa/asoundlib.h>
229     void main(void) {
230     /* ensure backward compatibility */
231     #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
232     #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
233     #endif
234     exit(SND_LIB_SUBMINOR);
235     }
236     ],
237     alsa_subminor=0,
238     alsa_subminor=$?,
239     alsa_subminor=0
240     )
241     AC_LANG_RESTORE
242     echo "$alsa_major.$alsa_minor.$alsa_subminor";
243     AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
244     AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
245     AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
246     else
247     echo "ALSA support disabled by configure script parameter"
248 schoenebeck 18 fi
249 schoenebeck 291 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
250 schoenebeck 288 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
251 schoenebeck 18
252 schoenebeck 852 # JACK
253     AC_ARG_ENABLE(jack-driver,
254     [ --disable-jack-driver
255     Disable support for the Jack Audio Connection Kit
256     (JACK).],
257 schoenebeck 1360 [config_jack_driver="$enableval"],
258 schoenebeck 852 [config_jack_driver="yes"]
259 schoenebeck 18 )
260 schoenebeck 852 have_jack=0
261     if test "$config_jack_driver" = "yes"; then
262     PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
263     if test $have_jack = "1"; then
264     AC_SUBST(JACK_LIBS)
265     AC_SUBST(JACK_CFLAGS)
266     AC_CHECK_LIB(jack, jack_client_name_size, [AC_DEFINE(HAVE_JACK_CLIENT_NAME_SIZE, 1, [Define to 1 if you have the `jack_client_name_size' function.])], , $JACK_LIBS)
267     have_audio_output_driver="true";
268     fi
269 schoenebeck 33 else
270 schoenebeck 852 echo "JACK support disabled by configure script parameter"
271 schoenebeck 33 fi
272 schoenebeck 852 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
273     AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
274 schoenebeck 31
275 schoenebeck 838 # ARTS
276 schoenebeck 852 AC_ARG_ENABLE(arts-driver,
277     [ --disable-arts-driver
278     Disable support for the Analogue Realtime System
279     (aRts).],
280 schoenebeck 1360 [config_arts_driver="$enableval"],
281 schoenebeck 852 [config_arts_driver="yes"]
282     )
283     have_arts=0
284     if test "$config_arts_driver" = "yes"; then
285     m4_ifdef([m4_include(m4/arts.m4)],,
286     [sinclude([m4/arts.m4])])
287     AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
288     if test "$have_arts" = "1"; then
289     have_audio_output_driver="true"
290     fi
291     else
292     echo "ARTS support disabled by configure script parameter"
293 schoenebeck 838 fi
294     AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
295     AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
296    
297 senoner 1502 # ASIO AUDIO (Win32)
298     AC_ARG_ENABLE(asiosdk-dir,
299     [ --enable-asiosdk-dir
300     Directory where the ASIO SDK is located, this automatically
301     enables the compilation of the ASIO audio output driver.],
302     [config_asiosdk_dir="${enableval}"],
303     [config_asiosdk_dir="."]
304     )
305     AC_SUBST(config_asiosdk_dir)
306    
307     AC_ARG_ENABLE(asio-driver,
308     [ --disable-asio-driver
309     Disable support for the Windows ASIO driver.],
310     [config_asio_driver="$enableval"],
311     [config_asio_driver="yes"]
312     )
313     have_asio=0
314     ASIOSDK_BASEDIR=
315     if test "$config_asio_driver" = "yes"; then
316     asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
317     echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
318     if test -e $asiosdk_headerfile ; then
319     echo yes
320     have_asio=1
321     ASIOSDK_BASEDIR="$config_asiosdk_dir"
322     else
323     echo no
324     have_asio=0
325     fi
326     if test "$have_asio" = "1"; then
327     have_audio_output_driver="true"
328     fi
329     else
330     echo "Windows ASIO support disabled by configure script parameter"
331     fi
332     AC_SUBST(ASIOSDK_BASEDIR)
333     AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
334     AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
335    
336 schoenebeck 609 # MidiShare (Linux, OS X, Windows)
337 schoenebeck 852 AC_ARG_ENABLE(midishare-driver,
338     [ --disable-midishare-driver
339     Disable support for the MidiShare system.],
340 schoenebeck 1360 [config_midishare_driver="$enableval"],
341 schoenebeck 852 [config_midishare_driver="yes"]
342 schoenebeck 609 )
343 schoenebeck 852 have_midishare=0
344     if test "$config_midishare_driver" = "yes"; then
345     AC_CHECK_HEADER(MidiShare.h,
346     AC_CHECK_LIB(MidiShare, MidiCountEvs,
347     have_midishare=1,
348     have_midishare=0
349     )
350     ,
351     have_midishare=0
352     )
353     if test "$have_midishare" = "1"; then
354     have_midi_input_driver="true"
355     fi
356     else
357     echo "MidiShare support disabled by configure script parameter"
358 schoenebeck 609 fi
359     AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
360     AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
361    
362     # CoreMIDI (OS X)
363 schoenebeck 852 AC_ARG_ENABLE(coremidi-driver,
364     [ --disable-coremidi-driver
365     Disable support for the Apple CoreMIDI system.],
366 schoenebeck 1360 [config_coremidi_driver="$enableval"],
367 schoenebeck 852 [config_coremidi_driver="yes"]
368 schoenebeck 609 )
369 schoenebeck 852 have_coremidi=0
370     if test "$config_coremidi_driver" = "yes"; then
371     AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
372     have_coremidi=1,
373     have_coremidi=0
374     )
375     if test "$have_coremidi" = "1"; then
376     have_midi_input_driver="true"
377     fi
378     else
379     echo "CoreMIDI support disabled by configure script parameter"
380 schoenebeck 609 fi
381     AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
382     AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
383    
384 senoner 1502 # MME MIDI (Win32)
385     AC_ARG_ENABLE(mmemidi-driver,
386     [ --disable-mmemidi-driver
387     Disable support for the Windows MME MIDI system.],
388     [config_mmemidi_driver="$enableval"],
389     [config_mmemidi_driver="yes"]
390     )
391     have_mmemidi=0
392     if test "$config_mmemidi_driver" = "yes"; then
393     AC_CHECK_HEADERS(mmsystem.h,
394     have_mmemidi=1,
395     have_mmemidi=0
396     )
397     if test "$have_mmemidi" = "1"; then
398     have_midi_input_driver="true"
399     fi
400     else
401     echo "MME MIDI support disabled by configure script parameter"
402     fi
403     AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
404     AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
405    
406 schoenebeck 1364 # have we found at least one MIDI input and one audio output driver ?
407     if test "$have_midi_input_driver" = "false"; then
408     echo "No supported MIDI input system found!"
409     echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
410     echo "ALSA, MIDIShare, CoreMIDI."
411     echo "If you think you have one of those available on your system, make sure you"
412     echo "also have the respective development (header) files installed."
413     exit -1;
414     fi
415     if test "$have_audio_output_driver" = "false"; then
416     echo "No supported audio output system found!"
417     echo "Sorry, LinuxSampler only supports ALSA, JACK and ARTS as audio output"
418     echo "driver at the moment!"
419     exit -1;
420     fi
421    
422    
423    
424     ###########################################################################
425     # Checks for various DLL libraries
426    
427 schoenebeck 504 # Check presence of libgig
428 schoenebeck 1560 libgig_version="3.2.1"
429 schoenebeck 504 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
430     if test "$HAVE_GIG" = "false"; then
431     echo "Required libgig version not found!"
432     echo "You need to have libgig version ${libgig_version} installed!"
433     exit -1;
434 schoenebeck 714 else
435     echo "yes, found libgig $libgig_version"
436 schoenebeck 504 fi
437     AC_SUBST(GIG_CFLAGS)
438     AC_SUBST(GIG_LIBS)
439    
440 schoenebeck 1364 # Instruments DB feature (requires SQLite 3.3)
441     AC_ARG_ENABLE(instruments-db,
442     [ --disable-instruments-db
443     Disable compilation of the sampler's instruments
444     database feature. You need to have SQLite 3.3
445     or younger installed for this feature.],
446     [config_instruments_db="$enableval"],
447     [config_instruments_db="yes"]
448     )
449     HAVE_SQLITE3=0;
450     if test "$config_instruments_db" = "yes"; then
451     # Check presence of sqlite3
452     sqlite_version="3.3"
453     PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
454     AC_SUBST(SQLITE3_LIBS)
455     AC_SUBST(SQLITE3_CFLAGS)
456     if test $HAVE_SQLITE3 = false; then
457     HAVE_SQLITE3=0
458     config_instruments_db="no"
459     echo "*** Required sqlite version not found!"
460     echo "*** You need to have sqlite version ${sqlite_version} or higher"
461     echo "*** for instruments database support to be enabled."
462     echo "*** Support for instruments DB will be disabled!"
463     else
464     HAVE_SQLITE3=1
465     fi
466 senkov 397 else
467 schoenebeck 1364 echo "Instruments DB feature disabled by configure script parameter"
468 senkov 397 fi
469     AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
470 schoenebeck 1364 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
471 schoenebeck 31
472 schoenebeck 288
473    
474 schoenebeck 554 ###########################################################################
475     # Handle Configuration Options
476    
477     # TODO: should we use AC_ARG_VAR(variable, description) instead?
478    
479 schoenebeck 617 AC_ARG_ENABLE(asm,
480 schoenebeck 1259 [ --disable-asm
481 schoenebeck 738 Enable hand-crafted assembly optimizations
482 schoenebeck 1259 (default=on). LinuxSampler provides CPU specific
483     assembly optimizations. This is currently limited
484     to just enter a fast (denormal) FPU mode on x86
485     platforms. There are currently no synthesis core
486     assembly optimizations anymore since LS 0.4.0],
487 schoenebeck 1360 [config_asm="$enableval"],
488 schoenebeck 1259 [config_asm="yes"]
489 schoenebeck 617 )
490     if test "$config_asm" = "yes"; then
491 schoenebeck 1259 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
492 schoenebeck 617 fi
493    
494 schoenebeck 554 AC_ARG_ENABLE(dev-mode,
495 schoenebeck 1424 [ --enable-dev-mode
496     Enable development mode (default=off). In that mode
497 schoenebeck 554 we do some extra sanity checks here and there.
498     This helps to spot possible problems, but reduces
499     efficiency a bit],
500 schoenebeck 1360 [config_dev_mode="$enableval"],
501 schoenebeck 1424 [config_dev_mode="no"]
502 schoenebeck 554 )
503     if test "$config_dev_mode" = "yes"; then
504     AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
505     fi
506    
507     AC_ARG_ENABLE(debug-level,
508     [ --enable-debug-level
509     Specify verbosity of console messages (default=1).
510     The higher the value, the higher will be verbosity.
511     A value of 0 means no console output at all.
512     There's not really an upper limit but the usual
513     level of all messages is currently somewhere less
514     than 10.],
515     [config_debug_level="${enableval}"],
516     [config_debug_level="1"]
517     )
518     AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
519    
520     AC_ARG_ENABLE(rt-exceptions,
521     [ --enable-rt-exceptions
522     Enable exceptions in the realtime thread
523     (default=no). If this is enabled, exceptions will
524     be thrown on critical errors in the realtime
525     context as well. Otherwise if disabled
526     segmentation faults will be forced by the
527     application on critical errors.],
528 schoenebeck 1360 [config_rt_exceptions="$enableval"],
529 schoenebeck 554 [config_rt_exceptions="no"]
530     )
531     if test "$config_rt_exceptions" = "yes"; then
532     AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
533     fi
534    
535     AC_ARG_ENABLE(preload-samples,
536     [ --enable-preload-samples
537     Due to seeking and latency issues with hard drives
538     we have to cache a small part of samples' head in
539     RAM (default=32768). The higher this value the
540     more memory will be occupied for each sample, but
541     the safer this will be in regards of possible
542     droputs. A 'good' value depends on the running
543     system and usage dependant factors.],
544     [config_preload_samples="${enableval}"],
545     [config_preload_samples="32768"]
546     )
547     AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
548    
549     AC_ARG_ENABLE(max-pitch,
550     [ --enable-max-pitch
551     Specify the maximum allowed pitch value in octaves
552     (default=4). To lower memory usage you might want
553     set a smaller value.],
554     [config_max_pitch="${enableval}"],
555     [config_max_pitch="4"]
556     )
557     AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
558    
559     AC_ARG_ENABLE(max-events,
560     [ --enable-max-events
561     Specify the maximum allowed amount of events to be
562     processed per fragment (default=1024).],
563     [config_max_events="${enableval}"],
564     [config_max_events="1024"]
565     )
566     AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
567    
568     AC_ARG_ENABLE(eg-bottom,
569     [ --enable-eg-bottom
570     Bottom limit of envelope generators
571     (default=0.001). Certain kinds of curve types like
572     exponential curves converge against 0 but never
573     reach 0. So we have to define a certain low value
574     after which we should consider all smaller values
575     to be 'almost zero'. The smaller this value, the
576     longer will voices survive in EG's release stage
577     and thus waste voices. If this value is too high
578     will cause click sounds though.],
579     [config_eg_bottom="${enableval}"],
580     [config_eg_bottom="0.001"]
581     )
582     AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
583    
584     AC_ARG_ENABLE(eg-min-release-time,
585     [ --enable-eg-min-release-time
586     Specify the lowest allowed release time in seconds
587     (default=0.0025). This value will also be used to
588     ramp down voices on voice stealing. This value
589     should always be less than the period time of the
590     used audio driver, as in case of voice stealing
591     the killed voice needs to be completely ramped
592     down in the same fragment.],
593     [config_eg_min_release_time="${enableval}"],
594     [config_eg_min_release_time="0.0025"]
595     )
596     AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
597    
598     AC_ARG_ENABLE(refill-streams,
599     [ --enable-refill-streams
600     Number of streams that should be refilled in each
601     disk thread cycle (default=4).],
602     [config_refill_streams="${enableval}"],
603     [config_refill_streams="4"]
604     )
605     AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
606    
607     AC_ARG_ENABLE(stream-min-refill,
608     [ --enable-stream-min-refill
609     Minimum refill size for disk streams (default=1024).
610     The disk thread will go to sleep for a while if no
611     stream had to be refilled more than this value in
612     a disk thread cycle.],
613     [config_stream_min_refill="${enableval}"],
614     [config_stream_min_refill="1024"]
615     )
616     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
617    
618     AC_ARG_ENABLE(stream-max-refill,
619     [ --enable-stream-max-refill
620     Maximum refill size for disk streams
621     (default=65536). The disk thread will refill
622     each stream only by a size of this value per
623     disk thread cycle.],
624     [config_stream_max_refill="${enableval}"],
625     [config_stream_max_refill="65536"]
626     )
627     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
628    
629     AC_ARG_ENABLE(stream-size,
630     [ --enable-stream-size
631     Size of each stream's ring buffer in sample points
632     (default=262144).],
633     [config_stream_size="${enableval}"],
634     [config_stream_size="262144"]
635     )
636     AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
637    
638     AC_ARG_ENABLE(max-streams,
639     [ --enable-max-streams
640     Maximum amount of disk streams (default=90). This
641     value should always be higher than the maximum
642     amount of voices.],
643     [config_max_streams="${enableval}"],
644     [config_max_streams="90"]
645     )
646     AC_DEFINE_UNQUOTED(CONFIG_MAX_STREAMS, $config_max_streams, [Define max. streams.])
647    
648     AC_ARG_ENABLE(max-voices,
649     [ --enable-max-voices
650     Maximum amount of voices (default=64). This value
651     should always be lower than the maximum amount of
652     disk streams.],
653     [config_max_voices="${enableval}"],
654     [config_max_voices="64"]
655     )
656     AC_DEFINE_UNQUOTED(CONFIG_MAX_VOICES, $config_max_voices, [Define max. voices.])
657    
658 schoenebeck 738 AC_ARG_ENABLE(subfragment-size,
659     [ --enable-subfragment-size
660     Every audio fragment will be splitted into
661     subfragments. Where each subfragment renders
662     audio with constant synthesis parameters. This is
663     done for efficiency reasons. This parameter
664     defines the default size of a subfragment in
665     sample points. A large value means less CPU time
666     whereas a low value means better audio quality
667     (default=32).],
668     [config_subfragment_size="${enableval}"],
669     [config_subfragment_size="32"]
670     )
671     AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
672    
673 schoenebeck 1005 AC_ARG_ENABLE(global-attenuation-default,
674     [ --enable-global-attenuation-default
675 schoenebeck 781 To prevent clipping all samples will be lowered
676 schoenebeck 1005 in amplitude by this given default factor (can
677     be overridden at runtime).
678 schoenebeck 781 (default=0.35)],
679 schoenebeck 1005 [config_global_attenuation_default="${enableval}"],
680     [config_global_attenuation_default="0.35"]
681 schoenebeck 781 )
682 schoenebeck 1005 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
683 schoenebeck 781
684 schoenebeck 554 AC_ARG_ENABLE(voice-steal-algo,
685     [ --enable-voice-steal-algo
686     Voice stealing algorithm to be used. Currently
687     available options:
688     none:
689     Disable voice stealing completely.
690 schoenebeck 563 oldestvoiceonkey (default):
691 schoenebeck 554 Try to kill a voice on the same key first,
692     if no success, proceed with the oldest key.
693 schoenebeck 563 oldestkey:
694 schoenebeck 554 Try to kill a voice from the oldest active
695     key.],
696     [ if test ! "(" "${enableval}" = "none" \
697     -o "${enableval}" = "oldestvoiceonkey" \
698     -o "${enableval}" = "oldestkey" ")" ; then
699     AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
700     else
701     config_voice_steal_algo="${enableval}"
702 schoenebeck 579 fi
703 schoenebeck 554 ],
704 schoenebeck 563 [config_voice_steal_algo="oldestvoiceonkey"]
705 schoenebeck 554 )
706     AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
707    
708     AC_ARG_ENABLE(sysex-buffer-size,
709     [ --enable-sysex-buffer-size
710     System Exclusive Message buffer size in kB
711     (default=2048).],
712     [config_sysex_buffer_size="${enableval}"],
713     [config_sysex_buffer_size="2048"]
714     )
715     AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
716    
717     AC_ARG_ENABLE(force-filter,
718     [ --enable-force-filter
719     If enabled will force filter to be used even if
720     no usage was define in instrument patch files.
721     (default=no).],
722 schoenebeck 1360 [config_force_filter="$enableval"],
723 schoenebeck 554 [config_force_filter="no"]
724     )
725     if test "$config_force_filter" = "yes"; then
726     AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
727     fi
728    
729     AC_ARG_ENABLE(filter-cutoff-min,
730     [ --enable-filter-cutoff-min
731     Minimum filter cutoff frequency in Hz
732     (default=100.0).],
733     [config_filter_cutoff_min="${enableval}"],
734     [config_filter_cutoff_min="100.0"]
735     )
736     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
737    
738     AC_ARG_ENABLE(filter-cutoff-max,
739     [ --enable-filter-cutoff-max
740     Maximum filter cutoff frequency in Hz
741     (default=10000.0).],
742     [config_filter_cutoff_max="${enableval}"],
743     [config_filter_cutoff_max="10000.0"]
744     )
745     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
746    
747     AC_ARG_ENABLE(override-cutoff-ctrl,
748     [ --enable-override-cutoff-ctrl
749     Override filter cutoff MIDI controller (default=no).
750     Note: you have to define the MIDI controller number
751     here, it's not a boolean parameter type! If this
752     option is used, controller number given by
753     instrument patch will be ignored and instead this
754     supplied value will be used.],
755     [config_override_cutoff_ctrl="${enableval}"],
756     [config_override_cutoff_ctrl="no"]
757     )
758     if test ! "$config_override_cutoff_ctrl" = "no"; then
759     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
760     fi
761    
762     AC_ARG_ENABLE(override-resonance-ctrl,
763     [ --enable-override-resonance-ctrl
764     Override filter resonance MIDI controller
765     (default=no). Note: you have to define the MIDI
766     controller number here, it's not a boolean
767     parameter type! If this option is used, controller
768     number given by instrument patch will be ignored
769     and instead this supplied value will be used.],
770     [config_override_resonance_ctrl="${enableval}"],
771     [config_override_resonance_ctrl="no"]
772     )
773     if test ! "$config_override_resonance_ctrl" = "no"; then
774     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
775     fi
776    
777     AC_ARG_ENABLE(override-filter-type,
778     [ --enable-override-filter-type
779     Override filter type (default=no). Options:
780     hp: for highpass
781     bp: for bandpass
782     br: for bandreject
783     lp: for lowpass
784     lpt: for lowpass turbo],
785     [ if test "${enableval}" = "hp" ; then
786     config_override_filter_type="::gig::vcf_type_highpass"
787     elif test "${enableval}" = "bp" ; then
788     config_override_filter_type="::gig::vcf_type_bandpass"
789     elif test "${enableval}" = "br" ; then
790     config_override_filter_type="::gig::vcf_type_bandreject"
791     elif test "${enableval}" = "lp" ; then
792     config_override_filter_type="::gig::vcf_type_lowpass"
793     elif test "${enableval}" = "lpt" ; then
794     config_override_filter_type="::gig::vcf_type_lowpassturbo"
795     elif test ! "${enableval}" = "no"; then
796     AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
797 schoenebeck 579 fi
798 schoenebeck 554 ],
799     [config_override_filter_type="no"]
800     )
801     if test ! "$config_override_filter_type" = "no"; then
802     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
803     fi
804    
805 schoenebeck 563 AC_ARG_ENABLE(gs-checksum,
806     [ --enable-gs-checksum
807     Enable Roland General Synth SysEx checksum check
808     (default=no). If this is enabled, all GS SysEx
809     messages which do not provide a correct checksum
810     will be ignored. This is disabled by default as
811     not all devices honor GS checksums.],
812 schoenebeck 1360 [config_assert_gs_sysex_checksum="$enableval"],
813 schoenebeck 563 [config_assert_gs_sysex_checksum="no"]
814     )
815     if test "config_assert_gs_sysex_checksum" = "yes"; then
816     AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
817     fi
818    
819 schoenebeck 829 AC_ARG_ENABLE(portamento-time-min,
820     [ --enable-portamento-time-min
821     Minimum Portamento time in seconds
822     (default=0.1).],
823     [config_portamento_time_min="${enableval}"],
824     [config_portamento_time_min="0.1"]
825     )
826     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
827    
828     AC_ARG_ENABLE(portamento-time-max,
829     [ --enable-portamento-time-max
830     Maximum Portamento time in seconds
831     (default=32).],
832     [config_portamento_time_max="${enableval}"],
833     [config_portamento_time_max="32"]
834     )
835     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
836    
837     AC_ARG_ENABLE(portamento-time-default,
838     [ --enable-portamento-time-default
839     Default Portamento time in seconds
840     (default=1).],
841     [config_portamento_time_default="${enableval}"],
842     [config_portamento_time_default="1"]
843     )
844     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
845    
846 schoenebeck 714 AC_ARG_ENABLE(signed-triang-algo,
847     [ --enable-signed-triang-algo
848     Signed triangular wave algorithm to be used (e.g. for LFOs).
849     Currently available options:
850     intmath:
851     Uses integer math without any branch will then be
852     converted to floating point value for each sample point.
853     This int->float conversion might hurt on some systems.
854 senkov 720 intmathabs:
855     Similar to intmath but uses abs() function.
856     Depending on compiler and platrofm this could
857     perform better than integer math as it avoids
858 schoenebeck 1360 an extra integer multiply instruction.
859 schoenebeck 714 diharmonic:
860     The triangular wave will be approximated by adding two
861     sinusoidials. This solution might especially hurt on
862     systems with weak floating point unit.
863     benchmark (default):
864     This is not an algorithm. Use this option if the
865     appropriate algorithm should be automatically
866     chosen by the configure script by performing a
867     benchmark between the algorithms mentioned above.
868     This will NOT work for cross compilation!],
869     [ if test ! "(" "${enableval}" = "intmath" \
870 senkov 720 -o "${enableval}" = "intmathabs" \
871 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
872     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
873     else
874     config_signed_triang_algo="${enableval}"
875     fi
876     ],
877     [config_signed_triang_algo="benchmark"]
878     )
879 schoenebeck 563
880 schoenebeck 714 AC_ARG_ENABLE(unsigned-triang-algo,
881     [ --enable-unsigned-triang-algo
882     Unsigned triangular wave algorithm to be used (e.g. for LFOs).
883     Currently available options:
884     intmath:
885     Uses integer math without any branch will then be
886     converted to floating point value for each sample point.
887     This int->float conversion might hurt on some systems.
888 senkov 720 intmathabs:
889     Similar to intmath but uses abs() function.
890     Depending on compiler and platrofm this could
891     perform better than integer math as it avoids
892 schoenebeck 1360 an extra integer multiply instruction.
893 schoenebeck 714 diharmonic:
894     The triangular wave will be approximated by adding two
895     sinusoidials. This solution might especially hurt on
896     systems with weak floating point unit.
897     benchmark (default):
898     This is not an algorithm. Use this option if the
899     appropriate algorithm should be automatically
900     chosen by the configure script by performing a
901     benchmark between the algorithms mentioned above.
902     This will NOT work for cross compilation!],
903     [ if test ! "(" "${enableval}" = "intmath" \
904 senkov 720 -o "${enableval}" = "intmathabs" \
905 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
906     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
907     else
908     config_unsigned_triang_algo="${enableval}"
909     fi
910     ],
911     [config_unsigned_triang_algo="benchmark"]
912     )
913    
914 iliev 716 AC_ARG_ENABLE(process-muted-channels,
915     [ --enable-process-muted-channels
916     Enable processing of muted channels (default=no).
917     In that mode all MIDI events in the muted channels
918     will be processed. This will provide information
919     about the active voices in the muted channels and
920     will not discard notes, triggered in mute mode,
921     when the channel is unmuted. But also will reduce
922     the efficiency.],
923 schoenebeck 1360 [config_process_muted_channels="$enableval"],
924 iliev 716 [config_process_muted_channels="no"]
925     )
926     if test "$config_process_muted_channels" = "yes"; then
927     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
928     fi
929 schoenebeck 714
930 schoenebeck 849 AC_ARG_ENABLE(process-all-notes-off,
931     [ --disable-process-all-notes-off
932     Disable interpretation of All-Notes-Off MIDI
933     messages (default=on). By default LS will release
934     all voices whenever it receives an All-Notes-Off
935     MIDI message. You can disable this behavior, so
936     that LS simply ignores such messages.],
937 schoenebeck 1360 [config_process_all_notes_off="$enableval"],
938 schoenebeck 849 [config_process_all_notes_off="yes"]
939     )
940     if test "$config_process_all_notes_off" = "yes"; then
941     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
942     fi
943    
944 persson 830 AC_ARG_ENABLE(interpolate-volume,
945     [ --disable-interpolate-volume
946     Disable interpolation of volume modulation
947     (default=on). With this enabled, the volume changes
948     generated by for example the envelope generator
949     will be smoother, minimizing the risk for audio
950     clicks. Disable it to reduce CPU usage.],
951 schoenebeck 1360 [config_interpolate_volume="$enableval"],
952 persson 830 [config_interpolate_volume="yes"]
953     )
954     if test "$config_interpolate_volume" = "yes"; then
955     AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
956     fi
957 iliev 716
958 schoenebeck 1212 AC_ARG_ENABLE(plugin-dir,
959     [ --enable-plugin-dir
960     Directory where the sampler shall look for potential plugins,
961     that is 3rd party shared libraries that should be loaded by
962     the sampler on startup. By default the sampler will search
963     for plugins in the subdirectory "plugins" below its own
964     library directory.
965     (i.e. /usr/local/lib/linuxsampler/plugins)],
966     [config_plugin_dir="${enableval}"],
967     [config_plugin_dir="${libdir}/linuxsampler/plugins"]
968     )
969     AC_SUBST(config_plugin_dir)
970 persson 830
971 schoenebeck 1364 AC_ARG_ENABLE(default-instruments-db-location,
972     [ --enable-default-instruments-db-location
973     Only when instruments DB feature is enabled: file name
974     which shall be taken as default location of the
975     instruments DB file. This location can still be
976     overridden at runtime with a command line switch.
977     (default: /var/lib/linuxsampler/instruments.db)],
978     [config_default_instruments_db_file="${enableval}"],
979     [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
980     )
981     AC_DEFINE_UNQUOTED(
982     CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
983     "$config_default_instruments_db_file",
984     [Only when instruments DB feature is enabled: default location of the DB file.]
985     )
986 schoenebeck 1432 AC_SUBST(config_default_instruments_db_file)
987 schoenebeck 1212
988 schoenebeck 1364
989 schoenebeck 554 ###########################################################################
990 schoenebeck 714 # Automatic Benchmarks (to detect the best algorithms for the system)
991    
992     AC_LANG_SAVE
993    
994     if test "$config_signed_triang_algo" = "benchmark"; then
995     echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
996     AC_LANG_CPLUSPLUS
997     AC_TRY_RUN([
998     #define SIGNED 1
999     #define SILENT 1
1000 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1001 schoenebeck 714 ],
1002     triang_signed=0,
1003     triang_signed=$?,
1004     triang_signed=0
1005     )
1006     if test "$triang_signed" = "2"; then
1007     config_signed_triang_algo="intmath"
1008     echo "integer math"
1009     elif test "$triang_signed" = "3"; then
1010     config_signed_triang_algo="diharmonic"
1011     echo "di harmonics"
1012 senkov 720 elif test "$triang_signed" = "5"; then
1013     config_signed_triang_algo="intmathabs"
1014     echo "integer math using abs()"
1015 schoenebeck 714 else
1016     echo "Benchmark of signed triangular wave algorithms failed!"
1017     echo "Maybe you are doing cross compilation? In that case you have to select"
1018     echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1019     echo "Call './configure --help' for further information or read configure.in."
1020     exit -1;
1021     fi
1022 schoenebeck 1165 else
1023     case "$config_signed_triang_algo" in
1024     intmath)
1025     triang_signed=2 ;;
1026     diharmonic)
1027     triang_signed=3 ;;
1028     intmathabs)
1029     triang_signed=5 ;;
1030     esac
1031 schoenebeck 714 fi
1032 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1033 schoenebeck 714
1034     if test "$config_unsigned_triang_algo" = "benchmark"; then
1035     echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1036     AC_LANG_CPLUSPLUS
1037     AC_TRY_RUN([
1038     #define SIGNED 0
1039     #define SILENT 1
1040 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1041 schoenebeck 714 ],
1042     triang_unsigned=0,
1043     triang_unsigned=$?,
1044     triang_unsigned=0
1045     )
1046     if test "$triang_unsigned" = "2"; then
1047     config_unsigned_triang_algo="intmath"
1048     echo "integer math"
1049     elif test "$triang_unsigned" = "3"; then
1050     config_unsigned_triang_algo="diharmonic"
1051     echo "di harmonics"
1052 senkov 720 elif test "$triang_unsigned" = "5"; then
1053 schoenebeck 726 config_unsigned_triang_algo="intmathabs"
1054 senkov 720 echo "integer math using abs()"
1055 schoenebeck 714 else
1056     echo "Benchmark of unsigned triangular wave algorithms failed!"
1057     echo "Maybe you are doing cross compilation? In that case you have to select"
1058     echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1059     echo "Call './configure --help' for further information or read configure.in."
1060     exit -1;
1061     fi
1062 schoenebeck 1165 else
1063     case "$config_unsigned_triang_algo" in
1064     intmath)
1065     triang_unsigned=2 ;;
1066     diharmonic)
1067     triang_unsigned=3 ;;
1068     intmathabs)
1069     triang_unsigned=5 ;;
1070     esac
1071 schoenebeck 714 fi
1072 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1073 schoenebeck 714
1074     AC_LANG_RESTORE
1075    
1076    
1077     ###########################################################################
1078 schoenebeck 554 # Create Build Files
1079    
1080 schoenebeck 9 AM_CONFIG_HEADER(config.h)
1081 schoenebeck 697 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1082 schoenebeck 9
1083     AC_LANG_CPLUSPLUS
1084     AC_PROG_CXX
1085 persson 497
1086 persson 685 # some gcc 4.0 versions need -msse for SSE register allocations
1087     if test "$config_asm" = "yes"; then
1088     if test "$def_arch_x86" = 1; then
1089     CXXFLAGS="$CXXFLAGS -msse"
1090     fi
1091     fi
1092    
1093 persson 497 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1094     # this, the dlfcn.h check in am_prog_libtool may fail.
1095     AC_CHECK_HEADER(stdlib.h)
1096    
1097 schoenebeck 654 AC_OUTPUT( \
1098     Makefile \
1099     man/Makefile \
1100     man/linuxsampler.1 \
1101     src/Makefile \
1102 iliev 1161 src/db/Makefile \
1103 schoenebeck 654 src/network/Makefile \
1104     src/engines/Makefile \
1105     src/engines/gig/Makefile \
1106     src/engines/common/Makefile \
1107 schoenebeck 1321 src/common/Makefile \
1108 schoenebeck 654 src/testcases/Makefile \
1109     src/drivers/Makefile \
1110     src/drivers/audio/Makefile \
1111     src/drivers/midi/Makefile \
1112 schoenebeck 1375 src/plugins/Makefile \
1113 schoenebeck 654 linuxsampler.spec \
1114     debian/Makefile \
1115     Artwork/Makefile \
1116     scripts/Makefile \
1117     osx/Makefile \
1118 schoenebeck 1175 osx/linuxsampler.xcodeproj/Makefile \
1119 schoenebeck 654 Documentation/Makefile \
1120     Documentation/Engines/Makefile \
1121     Documentation/Engines/gig/Makefile \
1122 schoenebeck 697 linuxsampler.pc \
1123     Doxyfile \
1124 schoenebeck 654 )
1125 schoenebeck 554
1126 schoenebeck 1212 # resolve all nested variables in '${config_plugin_dir}'
1127     # (merely for providing a human readable summary below)
1128     while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1129     config_plugin_dir=`eval echo ${config_plugin_dir}`
1130     done
1131 schoenebeck 554
1132 schoenebeck 1212
1133 schoenebeck 554 ###########################################################################
1134     # Output All Configuration Options
1135    
1136     echo ""
1137     echo "#####################################################################"
1138     echo "# LinuxSampler Configuration #"
1139     echo "#-------------------------------------------------------------------#"
1140 schoenebeck 617 echo "# Assembly Optimizations: ${config_asm}"
1141 schoenebeck 554 echo "# Development Mode: ${config_dev_mode}"
1142     echo "# Debug Level: ${config_debug_level}"
1143     echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1144     echo "# Preload Samples: ${config_preload_samples}"
1145     echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1146     echo "# Maximum Events: ${config_max_events}"
1147     echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1148     echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1149     echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1150     echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1151     echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1152     echo "# Stream Size: ${config_stream_size}"
1153     echo "# Maximum Disk Streams: ${config_max_streams}"
1154     echo "# Maximum Voices: ${config_max_voices}"
1155 schoenebeck 738 echo "# Default Subfragment Size: ${config_subfragment_size}"
1156 schoenebeck 1005 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1157 schoenebeck 563 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1158 schoenebeck 714 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1159     echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1160 schoenebeck 554 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1161 schoenebeck 829 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1162     echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1163     echo "# Default Portamento Time: ${config_portamento_time_default} s"
1164 schoenebeck 554 echo "# Force Filter Usage: ${config_force_filter}"
1165     echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1166     echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1167     echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1168     echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1169     echo "# Override Filter Type: ${config_override_filter_type}"
1170 schoenebeck 563 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1171 iliev 716 echo "# Process Muted Channels: ${config_process_muted_channels}"
1172 schoenebeck 849 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1173 persson 830 echo "# Interpolate Volume: ${config_interpolate_volume}"
1174 schoenebeck 1364 echo "# Instruments database support: ${config_instruments_db}"
1175     if test "$config_instruments_db" = "yes"; then
1176     echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1177     fi
1178 schoenebeck 1212 echo "# Plugin Path: ${config_plugin_dir}"
1179 schoenebeck 554 echo "#-------------------------------------------------------------------#"
1180     echo "# Read './configure --help' or file 'configure.in' for details. #"
1181     echo "#####################################################################"
1182     echo ""
1183     echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1184     echo ""

  ViewVC Help
Powered by ViewVC