/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Annotation of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1649 - (hide annotations) (download)
Fri Jan 25 15:06:02 2008 UTC (16 years, 1 month ago) by nagata
Original Path: linuxsampler/trunk/configure.in
File size: 49034 byte(s)
* added a new config option --enable-pthread-testcancel, which uses
pthread_testcancel() instead of asynchronous canceling (needed for OSX)

1 schoenebeck 9 AC_INIT(configure.in)
2 schoenebeck 697
3     #------------------------------------------------------------------------------------
4     # LinuxSampler's / liblinuxsampler's "official" release version:
5    
6     LINUXSAMPLER_RELEASE_MAJOR=0
7 schoenebeck 1424 LINUXSAMPLER_RELEASE_MINOR=5
8 schoenebeck 1560 LINUXSAMPLER_RELEASE_BUILD=1
9 schoenebeck 697
10     #------------------------------------------------------------------------------------
11     # The following is the libtool / shared library version. This doesn't have to
12     # do anything with the release version. It MUST conform to the following rules:
13     #
14     # 1. Start with version information of `0:0:0' for each libtool library.
15     # 2. Update the version information only immediately before a public release of
16     # your software. More frequent updates are unnecessary, and only guarantee
17     # that the current interface number gets larger faster.
18     # 3. If the library source code has changed at all since the last update, then
19     # increment revision (`c:r:a' becomes `c:r+1:a').
20     # 4. If any interfaces have been added, removed, or changed since the last update,
21     # increment current, and set revision to 0.
22     # 5. If any interfaces have been added since the last public release, then increment
23     # age.
24     # 6. If any interfaces have been removed since the last public release, then set age
25     # to 0.
26    
27 schoenebeck 1560 LIBLINUXSAMPLER_LT_CURRENT=2
28 schoenebeck 697 LIBLINUXSAMPLER_LT_REVISION=0
29 schoenebeck 1560 LIBLINUXSAMPLER_LT_AGE=1
30 schoenebeck 697 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31    
32 schoenebeck 947 #------------------------------------------------------------------------------------
33     # the LSCP specification version this LinuSampler release complies with:
34    
35     LSCP_RELEASE_MAJOR=1
36 schoenebeck 1525 LSCP_RELEASE_MINOR=3
37 schoenebeck 947
38     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40    
41 schoenebeck 697 AM_PROG_LIBTOOL
42    
43     AC_SUBST(SHLIB_VERSION_ARG)
44     AC_SUBST(SHARED_VERSION_INFO)
45    
46 schoenebeck 12 AC_C_BIGENDIAN
47 schoenebeck 9 AC_CANONICAL_SYSTEM
48    
49 schoenebeck 80 AC_SUBST(target)
50     AC_SUBST(target_alias)
51     AC_SUBST(target_cpu)
52     AC_SUBST(target_os)
53     AC_SUBST(target_vendor)
54 schoenebeck 18
55 schoenebeck 1639 PKG_PROG_PKG_CONFIG
56 schoenebeck 275
57 schoenebeck 554 ###########################################################################
58     # General Checks
59 schoenebeck 275
60 schoenebeck 510 AC_MSG_CHECKING([whether x86 architecture])
61 schoenebeck 9 def_arch_x86=0
62     case $target_cpu in
63     "i386" | "i486" | "i586" | "i686" | "i786")
64     echo "yes"
65     def_arch_x86=1;;
66     *)
67     echo "no";;
68     esac
69     AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
70    
71 schoenebeck 510 # determine the right gcc switch for CPU specific optimizations
72 schoenebeck 829 # (only if the user did not provide one)
73 schoenebeck 510 CXX_CPU_SWITCH=
74 schoenebeck 829 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
75     if test "$def_arch_x86" = 1; then
76     CXX_CPU_SWITCH="-march=$target_cpu"
77 schoenebeck 909 elif test "$target_cpu" = "ppc"; then
78 schoenebeck 829 CXX_CPU_SWITCH="-arch=$target_cpu"
79     fi
80 schoenebeck 510 fi
81     AC_SUBST([CXX_CPU_SWITCH])
82    
83 senoner 1502 # check if we're on MS Windows
84     AC_CHECK_HEADERS(
85     mmsystem.h,
86     have_windows=1,
87     have_windows=0
88     )
89     AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
90    
91 schoenebeck 288 AC_MSG_CHECKING([whether UNIX98 compatible])
92     AC_LANG_SAVE
93     AC_LANG_C
94     AC_TRY_RUN([
95     #ifndef _GNU_SOURCE
96     #define _GNU_SOURCE 1
97     #endif
98     #include <features.h>
99     void main(void) {
100     #if _XOPEN_SOURCE >= 500
101     exit(0); /* UNIX98 compatible */
102     #else
103     exit(-1); /* not UNIX98 compatible */
104     #endif
105     }
106     ],
107     have_unix98="yes",
108     have_unix98="no",
109     have_unix98="no"
110     )
111     AC_LANG_RESTORE
112     AC_MSG_RESULT([$have_unix98])
113 senoner 1502 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
114 schoenebeck 288 if test "x$HAVE_UNIX98" = "x"; then
115     echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
116     echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
117     echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
118     echo "have a UNIX98 compatible system."
119     exit -1;
120     fi
121     fi
122    
123 wylder 822 # check for <features.h>
124     AC_CHECK_HEADERS(features.h)
125 wylder 821
126 schoenebeck 1454 # test for POSIX thread library
127     m4_ifdef([m4_include(m4/pthread.m4)],,
128     [sinclude([m4/pthread.m4])])
129     ACX_PTHREAD
130     LIBS="$PTHREAD_LIBS $LIBS"
131     CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
132     CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
133     CC="$PTHREAD_CC"
134 schoenebeck 852
135 schoenebeck 1454 # check for a bug in NPTL-enabled glibc
136     # (see Gentoo bug report #194076)
137     AC_ARG_ENABLE(nptl-bug-check,
138     [ --disable-nptl-bug-check
139     Disable check for a bug in certain NPTL-enabled
140     glibc versions that caused crashs.],
141     [config_check_nptl_bug="$enableval"],
142     [config_check_nptl_bug="yes"]
143     )
144     if test "$config_check_nptl_bug" = "yes"; then
145     m4_ifdef([m4_include(m4/nptl_bug.m4)],,
146     [sinclude([m4/nptl_bug.m4])])
147     ACX_NPTL_GLIBC_BUG([
148     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
149     echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
150     echo "probably crash due to this. Please report us the system you are"
151     echo "using and/or file a bug report to the bug tracking system of"
152     echo "your distribution."
153     echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
154     echo "well, you can try to circumvent this problem for now by setting"
155     echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
156     echo "should cause this test to pass."
157     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
158     AC_MSG_ERROR([possibly NPTL glibc bug detected])
159     ])
160     else
161     echo "NPTL glibc bug check disabled"
162     fi
163    
164    
165    
166 schoenebeck 852 ###########################################################################
167 schoenebeck 288 # Checks for available audio and MIDI systems / drivers
168     # (we throw an error if there's not at least one system for audio output and MIDI input available)
169 schoenebeck 852
170 schoenebeck 288 have_midi_input_driver="false"
171     have_audio_output_driver="false"
172    
173 schoenebeck 852 # ALSA
174     AC_ARG_ENABLE(alsa-driver,
175     [ --disable-alsa-driver
176     Disable support for the Advanced Linux Sound
177     Architecture (ALSA).],
178 schoenebeck 1360 [config_alsa_driver="$enableval"],
179 schoenebeck 852 [config_alsa_driver="yes"]
180 schoenebeck 18 )
181 schoenebeck 852 have_alsa=0
182     if test "$config_alsa_driver" = "yes"; then
183     AC_CHECK_HEADER(alsa/asoundlib.h,
184     AC_CHECK_LIB(asound, main,
185     have_alsa=1
186     ,
187     have_alsa=0
188     )
189     ,
190     have_alsa=0
191     )
192     if test "$have_alsa" = "1"; then
193     have_midi_input_driver="true"
194     have_audio_output_driver="true";
195     fi
196    
197     echo -n "checking Alsa version... "
198     AC_LANG_SAVE
199     AC_LANG_C
200     AC_TRY_RUN([
201     #include <alsa/asoundlib.h>
202     void main(void) {
203     /* ensure backward compatibility */
204     #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
205     #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
206     #endif
207     exit(SND_LIB_MAJOR);
208     }
209     ],
210     alsa_major=0,
211     alsa_major=$?,
212     alsa_major=0
213     )
214     AC_TRY_RUN([
215     #include <alsa/asoundlib.h>
216     void main(void) {
217     /* ensure backward compatibility */
218     #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
219     #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
220     #endif
221     exit(SND_LIB_MINOR);
222     }
223     ],
224     alsa_minor=0,
225     alsa_minor=$?,
226     alsa_minor=0
227     )
228     AC_TRY_RUN([
229     #include <alsa/asoundlib.h>
230     void main(void) {
231     /* ensure backward compatibility */
232     #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
233     #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
234     #endif
235     exit(SND_LIB_SUBMINOR);
236     }
237     ],
238     alsa_subminor=0,
239     alsa_subminor=$?,
240     alsa_subminor=0
241     )
242     AC_LANG_RESTORE
243     echo "$alsa_major.$alsa_minor.$alsa_subminor";
244     AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
245     AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
246     AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
247     else
248     echo "ALSA support disabled by configure script parameter"
249 schoenebeck 18 fi
250 schoenebeck 291 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
251 schoenebeck 288 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
252 schoenebeck 18
253 schoenebeck 852 # JACK
254     AC_ARG_ENABLE(jack-driver,
255     [ --disable-jack-driver
256     Disable support for the Jack Audio Connection Kit
257     (JACK).],
258 schoenebeck 1360 [config_jack_driver="$enableval"],
259 schoenebeck 852 [config_jack_driver="yes"]
260 schoenebeck 18 )
261 schoenebeck 852 have_jack=0
262     if test "$config_jack_driver" = "yes"; then
263     PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
264     if test $have_jack = "1"; then
265     AC_SUBST(JACK_LIBS)
266     AC_SUBST(JACK_CFLAGS)
267     AC_CHECK_LIB(jack, jack_client_name_size, [AC_DEFINE(HAVE_JACK_CLIENT_NAME_SIZE, 1, [Define to 1 if you have the `jack_client_name_size' function.])], , $JACK_LIBS)
268     have_audio_output_driver="true";
269     fi
270 schoenebeck 33 else
271 schoenebeck 852 echo "JACK support disabled by configure script parameter"
272 schoenebeck 33 fi
273 schoenebeck 852 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
274     AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
275 schoenebeck 31
276 schoenebeck 838 # ARTS
277 schoenebeck 852 AC_ARG_ENABLE(arts-driver,
278     [ --disable-arts-driver
279     Disable support for the Analogue Realtime System
280     (aRts).],
281 schoenebeck 1360 [config_arts_driver="$enableval"],
282 schoenebeck 852 [config_arts_driver="yes"]
283     )
284     have_arts=0
285     if test "$config_arts_driver" = "yes"; then
286     m4_ifdef([m4_include(m4/arts.m4)],,
287     [sinclude([m4/arts.m4])])
288     AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
289     if test "$have_arts" = "1"; then
290     have_audio_output_driver="true"
291     fi
292     else
293     echo "ARTS support disabled by configure script parameter"
294 schoenebeck 838 fi
295     AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
296     AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
297    
298 senoner 1502 # ASIO AUDIO (Win32)
299     AC_ARG_ENABLE(asiosdk-dir,
300     [ --enable-asiosdk-dir
301     Directory where the ASIO SDK is located, this automatically
302     enables the compilation of the ASIO audio output driver.],
303     [config_asiosdk_dir="${enableval}"],
304     [config_asiosdk_dir="."]
305     )
306     AC_SUBST(config_asiosdk_dir)
307    
308     AC_ARG_ENABLE(asio-driver,
309     [ --disable-asio-driver
310     Disable support for the Windows ASIO driver.],
311     [config_asio_driver="$enableval"],
312     [config_asio_driver="yes"]
313     )
314     have_asio=0
315     ASIOSDK_BASEDIR=
316     if test "$config_asio_driver" = "yes"; then
317     asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
318     echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
319     if test -e $asiosdk_headerfile ; then
320     echo yes
321     have_asio=1
322     ASIOSDK_BASEDIR="$config_asiosdk_dir"
323     else
324     echo no
325     have_asio=0
326     fi
327     if test "$have_asio" = "1"; then
328     have_audio_output_driver="true"
329     fi
330     else
331     echo "Windows ASIO support disabled by configure script parameter"
332     fi
333     AC_SUBST(ASIOSDK_BASEDIR)
334     AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
335     AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
336    
337 schoenebeck 609 # MidiShare (Linux, OS X, Windows)
338 schoenebeck 852 AC_ARG_ENABLE(midishare-driver,
339     [ --disable-midishare-driver
340     Disable support for the MidiShare system.],
341 schoenebeck 1360 [config_midishare_driver="$enableval"],
342 schoenebeck 852 [config_midishare_driver="yes"]
343 schoenebeck 609 )
344 schoenebeck 852 have_midishare=0
345     if test "$config_midishare_driver" = "yes"; then
346     AC_CHECK_HEADER(MidiShare.h,
347     AC_CHECK_LIB(MidiShare, MidiCountEvs,
348     have_midishare=1,
349     have_midishare=0
350     )
351     ,
352     have_midishare=0
353     )
354     if test "$have_midishare" = "1"; then
355     have_midi_input_driver="true"
356     fi
357     else
358     echo "MidiShare support disabled by configure script parameter"
359 schoenebeck 609 fi
360     AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
361     AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
362    
363     # CoreMIDI (OS X)
364 schoenebeck 852 AC_ARG_ENABLE(coremidi-driver,
365     [ --disable-coremidi-driver
366     Disable support for the Apple CoreMIDI system.],
367 schoenebeck 1360 [config_coremidi_driver="$enableval"],
368 schoenebeck 852 [config_coremidi_driver="yes"]
369 schoenebeck 609 )
370 schoenebeck 852 have_coremidi=0
371     if test "$config_coremidi_driver" = "yes"; then
372     AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
373     have_coremidi=1,
374     have_coremidi=0
375     )
376     if test "$have_coremidi" = "1"; then
377     have_midi_input_driver="true"
378     fi
379     else
380     echo "CoreMIDI support disabled by configure script parameter"
381 schoenebeck 609 fi
382     AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
383     AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
384    
385 senoner 1502 # MME MIDI (Win32)
386     AC_ARG_ENABLE(mmemidi-driver,
387     [ --disable-mmemidi-driver
388     Disable support for the Windows MME MIDI system.],
389     [config_mmemidi_driver="$enableval"],
390     [config_mmemidi_driver="yes"]
391     )
392     have_mmemidi=0
393     if test "$config_mmemidi_driver" = "yes"; then
394     AC_CHECK_HEADERS(mmsystem.h,
395     have_mmemidi=1,
396     have_mmemidi=0
397     )
398     if test "$have_mmemidi" = "1"; then
399     have_midi_input_driver="true"
400     fi
401     else
402     echo "MME MIDI support disabled by configure script parameter"
403     fi
404     AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
405     AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
406    
407 schoenebeck 1364 # have we found at least one MIDI input and one audio output driver ?
408     if test "$have_midi_input_driver" = "false"; then
409     echo "No supported MIDI input system found!"
410     echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
411     echo "ALSA, MIDIShare, CoreMIDI."
412     echo "If you think you have one of those available on your system, make sure you"
413     echo "also have the respective development (header) files installed."
414     exit -1;
415     fi
416     if test "$have_audio_output_driver" = "false"; then
417     echo "No supported audio output system found!"
418     echo "Sorry, LinuxSampler only supports ALSA, JACK and ARTS as audio output"
419     echo "driver at the moment!"
420     exit -1;
421     fi
422    
423    
424    
425     ###########################################################################
426     # Checks for various DLL libraries
427    
428 schoenebeck 504 # Check presence of libgig
429 schoenebeck 1560 libgig_version="3.2.1"
430 schoenebeck 504 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
431     if test "$HAVE_GIG" = "false"; then
432     echo "Required libgig version not found!"
433     echo "You need to have libgig version ${libgig_version} installed!"
434     exit -1;
435 schoenebeck 714 else
436     echo "yes, found libgig $libgig_version"
437 schoenebeck 504 fi
438     AC_SUBST(GIG_CFLAGS)
439     AC_SUBST(GIG_LIBS)
440    
441 schoenebeck 1364 # Instruments DB feature (requires SQLite 3.3)
442     AC_ARG_ENABLE(instruments-db,
443     [ --disable-instruments-db
444     Disable compilation of the sampler's instruments
445     database feature. You need to have SQLite 3.3
446     or younger installed for this feature.],
447     [config_instruments_db="$enableval"],
448     [config_instruments_db="yes"]
449     )
450     HAVE_SQLITE3=0;
451     if test "$config_instruments_db" = "yes"; then
452     # Check presence of sqlite3
453     sqlite_version="3.3"
454     PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
455     AC_SUBST(SQLITE3_LIBS)
456     AC_SUBST(SQLITE3_CFLAGS)
457     if test $HAVE_SQLITE3 = false; then
458     HAVE_SQLITE3=0
459     config_instruments_db="no"
460     echo "*** Required sqlite version not found!"
461     echo "*** You need to have sqlite version ${sqlite_version} or higher"
462     echo "*** for instruments database support to be enabled."
463     echo "*** Support for instruments DB will be disabled!"
464     else
465     HAVE_SQLITE3=1
466     fi
467 senkov 397 else
468 schoenebeck 1364 echo "Instruments DB feature disabled by configure script parameter"
469 senkov 397 fi
470     AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
471 schoenebeck 1364 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
472 schoenebeck 31
473 schoenebeck 288
474    
475 schoenebeck 554 ###########################################################################
476     # Handle Configuration Options
477    
478     # TODO: should we use AC_ARG_VAR(variable, description) instead?
479    
480 schoenebeck 617 AC_ARG_ENABLE(asm,
481 schoenebeck 1259 [ --disable-asm
482 schoenebeck 738 Enable hand-crafted assembly optimizations
483 schoenebeck 1259 (default=on). LinuxSampler provides CPU specific
484     assembly optimizations. This is currently limited
485     to just enter a fast (denormal) FPU mode on x86
486     platforms. There are currently no synthesis core
487     assembly optimizations anymore since LS 0.4.0],
488 schoenebeck 1360 [config_asm="$enableval"],
489 schoenebeck 1259 [config_asm="yes"]
490 schoenebeck 617 )
491     if test "$config_asm" = "yes"; then
492 schoenebeck 1259 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
493 schoenebeck 617 fi
494    
495 schoenebeck 554 AC_ARG_ENABLE(dev-mode,
496 schoenebeck 1424 [ --enable-dev-mode
497     Enable development mode (default=off). In that mode
498 schoenebeck 554 we do some extra sanity checks here and there.
499     This helps to spot possible problems, but reduces
500     efficiency a bit],
501 schoenebeck 1360 [config_dev_mode="$enableval"],
502 schoenebeck 1424 [config_dev_mode="no"]
503 schoenebeck 554 )
504     if test "$config_dev_mode" = "yes"; then
505     AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
506     fi
507    
508     AC_ARG_ENABLE(debug-level,
509     [ --enable-debug-level
510     Specify verbosity of console messages (default=1).
511     The higher the value, the higher will be verbosity.
512     A value of 0 means no console output at all.
513     There's not really an upper limit but the usual
514     level of all messages is currently somewhere less
515     than 10.],
516     [config_debug_level="${enableval}"],
517     [config_debug_level="1"]
518     )
519     AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
520    
521     AC_ARG_ENABLE(rt-exceptions,
522     [ --enable-rt-exceptions
523     Enable exceptions in the realtime thread
524     (default=no). If this is enabled, exceptions will
525     be thrown on critical errors in the realtime
526     context as well. Otherwise if disabled
527     segmentation faults will be forced by the
528     application on critical errors.],
529 schoenebeck 1360 [config_rt_exceptions="$enableval"],
530 schoenebeck 554 [config_rt_exceptions="no"]
531     )
532     if test "$config_rt_exceptions" = "yes"; then
533     AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
534     fi
535    
536 nagata 1649 AC_ARG_ENABLE(pthread-testcancel,
537     [ --enable-pthread-testcancel
538     Enable pthread_testcancel() calls and avoid asynchronous
539     cancel of pthreads (default=no).],
540     [config_pthread_testcancel="$enableval"],
541     [config_pthread_testcancel="no"]
542     )
543     if test "$config_pthread_testcancel" = "yes"; then
544     AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
545     fi
546    
547 schoenebeck 554 AC_ARG_ENABLE(preload-samples,
548     [ --enable-preload-samples
549     Due to seeking and latency issues with hard drives
550     we have to cache a small part of samples' head in
551     RAM (default=32768). The higher this value the
552     more memory will be occupied for each sample, but
553     the safer this will be in regards of possible
554     droputs. A 'good' value depends on the running
555     system and usage dependant factors.],
556     [config_preload_samples="${enableval}"],
557     [config_preload_samples="32768"]
558     )
559     AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
560    
561     AC_ARG_ENABLE(max-pitch,
562     [ --enable-max-pitch
563     Specify the maximum allowed pitch value in octaves
564     (default=4). To lower memory usage you might want
565     set a smaller value.],
566     [config_max_pitch="${enableval}"],
567     [config_max_pitch="4"]
568     )
569     AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
570    
571     AC_ARG_ENABLE(max-events,
572     [ --enable-max-events
573     Specify the maximum allowed amount of events to be
574     processed per fragment (default=1024).],
575     [config_max_events="${enableval}"],
576     [config_max_events="1024"]
577     )
578     AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
579    
580     AC_ARG_ENABLE(eg-bottom,
581     [ --enable-eg-bottom
582     Bottom limit of envelope generators
583     (default=0.001). Certain kinds of curve types like
584     exponential curves converge against 0 but never
585     reach 0. So we have to define a certain low value
586     after which we should consider all smaller values
587     to be 'almost zero'. The smaller this value, the
588     longer will voices survive in EG's release stage
589     and thus waste voices. If this value is too high
590     will cause click sounds though.],
591     [config_eg_bottom="${enableval}"],
592     [config_eg_bottom="0.001"]
593     )
594     AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
595    
596     AC_ARG_ENABLE(eg-min-release-time,
597     [ --enable-eg-min-release-time
598     Specify the lowest allowed release time in seconds
599     (default=0.0025). This value will also be used to
600     ramp down voices on voice stealing. This value
601     should always be less than the period time of the
602     used audio driver, as in case of voice stealing
603     the killed voice needs to be completely ramped
604     down in the same fragment.],
605     [config_eg_min_release_time="${enableval}"],
606     [config_eg_min_release_time="0.0025"]
607     )
608     AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
609    
610     AC_ARG_ENABLE(refill-streams,
611     [ --enable-refill-streams
612     Number of streams that should be refilled in each
613     disk thread cycle (default=4).],
614     [config_refill_streams="${enableval}"],
615     [config_refill_streams="4"]
616     )
617     AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
618    
619     AC_ARG_ENABLE(stream-min-refill,
620     [ --enable-stream-min-refill
621     Minimum refill size for disk streams (default=1024).
622     The disk thread will go to sleep for a while if no
623     stream had to be refilled more than this value in
624     a disk thread cycle.],
625     [config_stream_min_refill="${enableval}"],
626     [config_stream_min_refill="1024"]
627     )
628     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
629    
630     AC_ARG_ENABLE(stream-max-refill,
631     [ --enable-stream-max-refill
632     Maximum refill size for disk streams
633     (default=65536). The disk thread will refill
634     each stream only by a size of this value per
635     disk thread cycle.],
636     [config_stream_max_refill="${enableval}"],
637     [config_stream_max_refill="65536"]
638     )
639     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
640    
641     AC_ARG_ENABLE(stream-size,
642     [ --enable-stream-size
643     Size of each stream's ring buffer in sample points
644     (default=262144).],
645     [config_stream_size="${enableval}"],
646     [config_stream_size="262144"]
647     )
648     AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
649    
650     AC_ARG_ENABLE(max-streams,
651     [ --enable-max-streams
652     Maximum amount of disk streams (default=90). This
653     value should always be higher than the maximum
654     amount of voices.],
655     [config_max_streams="${enableval}"],
656     [config_max_streams="90"]
657     )
658     AC_DEFINE_UNQUOTED(CONFIG_MAX_STREAMS, $config_max_streams, [Define max. streams.])
659    
660     AC_ARG_ENABLE(max-voices,
661     [ --enable-max-voices
662     Maximum amount of voices (default=64). This value
663     should always be lower than the maximum amount of
664     disk streams.],
665     [config_max_voices="${enableval}"],
666     [config_max_voices="64"]
667     )
668     AC_DEFINE_UNQUOTED(CONFIG_MAX_VOICES, $config_max_voices, [Define max. voices.])
669    
670 schoenebeck 738 AC_ARG_ENABLE(subfragment-size,
671     [ --enable-subfragment-size
672     Every audio fragment will be splitted into
673     subfragments. Where each subfragment renders
674     audio with constant synthesis parameters. This is
675     done for efficiency reasons. This parameter
676     defines the default size of a subfragment in
677     sample points. A large value means less CPU time
678     whereas a low value means better audio quality
679     (default=32).],
680     [config_subfragment_size="${enableval}"],
681     [config_subfragment_size="32"]
682     )
683     AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
684    
685 schoenebeck 1005 AC_ARG_ENABLE(global-attenuation-default,
686     [ --enable-global-attenuation-default
687 schoenebeck 781 To prevent clipping all samples will be lowered
688 schoenebeck 1005 in amplitude by this given default factor (can
689     be overridden at runtime).
690 schoenebeck 781 (default=0.35)],
691 schoenebeck 1005 [config_global_attenuation_default="${enableval}"],
692     [config_global_attenuation_default="0.35"]
693 schoenebeck 781 )
694 schoenebeck 1005 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
695 schoenebeck 781
696 schoenebeck 554 AC_ARG_ENABLE(voice-steal-algo,
697     [ --enable-voice-steal-algo
698     Voice stealing algorithm to be used. Currently
699     available options:
700     none:
701     Disable voice stealing completely.
702 schoenebeck 563 oldestvoiceonkey (default):
703 schoenebeck 554 Try to kill a voice on the same key first,
704     if no success, proceed with the oldest key.
705 schoenebeck 563 oldestkey:
706 schoenebeck 554 Try to kill a voice from the oldest active
707     key.],
708     [ if test ! "(" "${enableval}" = "none" \
709     -o "${enableval}" = "oldestvoiceonkey" \
710     -o "${enableval}" = "oldestkey" ")" ; then
711     AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
712     else
713     config_voice_steal_algo="${enableval}"
714 schoenebeck 579 fi
715 schoenebeck 554 ],
716 schoenebeck 563 [config_voice_steal_algo="oldestvoiceonkey"]
717 schoenebeck 554 )
718     AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
719    
720     AC_ARG_ENABLE(sysex-buffer-size,
721     [ --enable-sysex-buffer-size
722     System Exclusive Message buffer size in kB
723     (default=2048).],
724     [config_sysex_buffer_size="${enableval}"],
725     [config_sysex_buffer_size="2048"]
726     )
727     AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
728    
729     AC_ARG_ENABLE(force-filter,
730     [ --enable-force-filter
731     If enabled will force filter to be used even if
732     no usage was define in instrument patch files.
733     (default=no).],
734 schoenebeck 1360 [config_force_filter="$enableval"],
735 schoenebeck 554 [config_force_filter="no"]
736     )
737     if test "$config_force_filter" = "yes"; then
738     AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
739     fi
740    
741     AC_ARG_ENABLE(filter-cutoff-min,
742     [ --enable-filter-cutoff-min
743     Minimum filter cutoff frequency in Hz
744     (default=100.0).],
745     [config_filter_cutoff_min="${enableval}"],
746     [config_filter_cutoff_min="100.0"]
747     )
748     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
749    
750     AC_ARG_ENABLE(filter-cutoff-max,
751     [ --enable-filter-cutoff-max
752     Maximum filter cutoff frequency in Hz
753     (default=10000.0).],
754     [config_filter_cutoff_max="${enableval}"],
755     [config_filter_cutoff_max="10000.0"]
756     )
757     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
758    
759     AC_ARG_ENABLE(override-cutoff-ctrl,
760     [ --enable-override-cutoff-ctrl
761     Override filter cutoff MIDI controller (default=no).
762     Note: you have to define the MIDI controller number
763     here, it's not a boolean parameter type! If this
764     option is used, controller number given by
765     instrument patch will be ignored and instead this
766     supplied value will be used.],
767     [config_override_cutoff_ctrl="${enableval}"],
768     [config_override_cutoff_ctrl="no"]
769     )
770     if test ! "$config_override_cutoff_ctrl" = "no"; then
771     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
772     fi
773    
774     AC_ARG_ENABLE(override-resonance-ctrl,
775     [ --enable-override-resonance-ctrl
776     Override filter resonance MIDI controller
777     (default=no). Note: you have to define the MIDI
778     controller number here, it's not a boolean
779     parameter type! If this option is used, controller
780     number given by instrument patch will be ignored
781     and instead this supplied value will be used.],
782     [config_override_resonance_ctrl="${enableval}"],
783     [config_override_resonance_ctrl="no"]
784     )
785     if test ! "$config_override_resonance_ctrl" = "no"; then
786     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
787     fi
788    
789     AC_ARG_ENABLE(override-filter-type,
790     [ --enable-override-filter-type
791     Override filter type (default=no). Options:
792     hp: for highpass
793     bp: for bandpass
794     br: for bandreject
795     lp: for lowpass
796     lpt: for lowpass turbo],
797     [ if test "${enableval}" = "hp" ; then
798     config_override_filter_type="::gig::vcf_type_highpass"
799     elif test "${enableval}" = "bp" ; then
800     config_override_filter_type="::gig::vcf_type_bandpass"
801     elif test "${enableval}" = "br" ; then
802     config_override_filter_type="::gig::vcf_type_bandreject"
803     elif test "${enableval}" = "lp" ; then
804     config_override_filter_type="::gig::vcf_type_lowpass"
805     elif test "${enableval}" = "lpt" ; then
806     config_override_filter_type="::gig::vcf_type_lowpassturbo"
807     elif test ! "${enableval}" = "no"; then
808     AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
809 schoenebeck 579 fi
810 schoenebeck 554 ],
811     [config_override_filter_type="no"]
812     )
813     if test ! "$config_override_filter_type" = "no"; then
814     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
815     fi
816    
817 schoenebeck 563 AC_ARG_ENABLE(gs-checksum,
818     [ --enable-gs-checksum
819     Enable Roland General Synth SysEx checksum check
820     (default=no). If this is enabled, all GS SysEx
821     messages which do not provide a correct checksum
822     will be ignored. This is disabled by default as
823     not all devices honor GS checksums.],
824 schoenebeck 1360 [config_assert_gs_sysex_checksum="$enableval"],
825 schoenebeck 563 [config_assert_gs_sysex_checksum="no"]
826     )
827     if test "config_assert_gs_sysex_checksum" = "yes"; then
828     AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
829     fi
830    
831 schoenebeck 829 AC_ARG_ENABLE(portamento-time-min,
832     [ --enable-portamento-time-min
833     Minimum Portamento time in seconds
834     (default=0.1).],
835     [config_portamento_time_min="${enableval}"],
836     [config_portamento_time_min="0.1"]
837     )
838     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
839    
840     AC_ARG_ENABLE(portamento-time-max,
841     [ --enable-portamento-time-max
842     Maximum Portamento time in seconds
843     (default=32).],
844     [config_portamento_time_max="${enableval}"],
845     [config_portamento_time_max="32"]
846     )
847     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
848    
849     AC_ARG_ENABLE(portamento-time-default,
850     [ --enable-portamento-time-default
851     Default Portamento time in seconds
852     (default=1).],
853     [config_portamento_time_default="${enableval}"],
854     [config_portamento_time_default="1"]
855     )
856     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
857    
858 schoenebeck 714 AC_ARG_ENABLE(signed-triang-algo,
859     [ --enable-signed-triang-algo
860     Signed triangular wave algorithm to be used (e.g. for LFOs).
861     Currently available options:
862     intmath:
863     Uses integer math without any branch will then be
864     converted to floating point value for each sample point.
865     This int->float conversion might hurt on some systems.
866 senkov 720 intmathabs:
867     Similar to intmath but uses abs() function.
868     Depending on compiler and platrofm this could
869     perform better than integer math as it avoids
870 schoenebeck 1360 an extra integer multiply instruction.
871 schoenebeck 714 diharmonic:
872     The triangular wave will be approximated by adding two
873     sinusoidials. This solution might especially hurt on
874     systems with weak floating point unit.
875     benchmark (default):
876     This is not an algorithm. Use this option if the
877     appropriate algorithm should be automatically
878     chosen by the configure script by performing a
879     benchmark between the algorithms mentioned above.
880     This will NOT work for cross compilation!],
881     [ if test ! "(" "${enableval}" = "intmath" \
882 senkov 720 -o "${enableval}" = "intmathabs" \
883 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
884     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
885     else
886     config_signed_triang_algo="${enableval}"
887     fi
888     ],
889     [config_signed_triang_algo="benchmark"]
890     )
891 schoenebeck 563
892 schoenebeck 714 AC_ARG_ENABLE(unsigned-triang-algo,
893     [ --enable-unsigned-triang-algo
894     Unsigned triangular wave algorithm to be used (e.g. for LFOs).
895     Currently available options:
896     intmath:
897     Uses integer math without any branch will then be
898     converted to floating point value for each sample point.
899     This int->float conversion might hurt on some systems.
900 senkov 720 intmathabs:
901     Similar to intmath but uses abs() function.
902     Depending on compiler and platrofm this could
903     perform better than integer math as it avoids
904 schoenebeck 1360 an extra integer multiply instruction.
905 schoenebeck 714 diharmonic:
906     The triangular wave will be approximated by adding two
907     sinusoidials. This solution might especially hurt on
908     systems with weak floating point unit.
909     benchmark (default):
910     This is not an algorithm. Use this option if the
911     appropriate algorithm should be automatically
912     chosen by the configure script by performing a
913     benchmark between the algorithms mentioned above.
914     This will NOT work for cross compilation!],
915     [ if test ! "(" "${enableval}" = "intmath" \
916 senkov 720 -o "${enableval}" = "intmathabs" \
917 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
918     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
919     else
920     config_unsigned_triang_algo="${enableval}"
921     fi
922     ],
923     [config_unsigned_triang_algo="benchmark"]
924     )
925    
926 iliev 716 AC_ARG_ENABLE(process-muted-channels,
927     [ --enable-process-muted-channels
928     Enable processing of muted channels (default=no).
929     In that mode all MIDI events in the muted channels
930     will be processed. This will provide information
931     about the active voices in the muted channels and
932     will not discard notes, triggered in mute mode,
933     when the channel is unmuted. But also will reduce
934     the efficiency.],
935 schoenebeck 1360 [config_process_muted_channels="$enableval"],
936 iliev 716 [config_process_muted_channels="no"]
937     )
938     if test "$config_process_muted_channels" = "yes"; then
939     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
940     fi
941 schoenebeck 714
942 schoenebeck 849 AC_ARG_ENABLE(process-all-notes-off,
943     [ --disable-process-all-notes-off
944     Disable interpretation of All-Notes-Off MIDI
945     messages (default=on). By default LS will release
946     all voices whenever it receives an All-Notes-Off
947     MIDI message. You can disable this behavior, so
948     that LS simply ignores such messages.],
949 schoenebeck 1360 [config_process_all_notes_off="$enableval"],
950 schoenebeck 849 [config_process_all_notes_off="yes"]
951     )
952     if test "$config_process_all_notes_off" = "yes"; then
953     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
954     fi
955    
956 persson 830 AC_ARG_ENABLE(interpolate-volume,
957     [ --disable-interpolate-volume
958     Disable interpolation of volume modulation
959     (default=on). With this enabled, the volume changes
960     generated by for example the envelope generator
961     will be smoother, minimizing the risk for audio
962     clicks. Disable it to reduce CPU usage.],
963 schoenebeck 1360 [config_interpolate_volume="$enableval"],
964 persson 830 [config_interpolate_volume="yes"]
965     )
966     if test "$config_interpolate_volume" = "yes"; then
967     AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
968     fi
969 iliev 716
970 schoenebeck 1212 AC_ARG_ENABLE(plugin-dir,
971     [ --enable-plugin-dir
972     Directory where the sampler shall look for potential plugins,
973     that is 3rd party shared libraries that should be loaded by
974     the sampler on startup. By default the sampler will search
975     for plugins in the subdirectory "plugins" below its own
976     library directory.
977     (i.e. /usr/local/lib/linuxsampler/plugins)],
978     [config_plugin_dir="${enableval}"],
979     [config_plugin_dir="${libdir}/linuxsampler/plugins"]
980     )
981     AC_SUBST(config_plugin_dir)
982 persson 830
983 schoenebeck 1364 AC_ARG_ENABLE(default-instruments-db-location,
984     [ --enable-default-instruments-db-location
985     Only when instruments DB feature is enabled: file name
986     which shall be taken as default location of the
987     instruments DB file. This location can still be
988     overridden at runtime with a command line switch.
989     (default: /var/lib/linuxsampler/instruments.db)],
990     [config_default_instruments_db_file="${enableval}"],
991     [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
992     )
993     AC_DEFINE_UNQUOTED(
994     CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
995     "$config_default_instruments_db_file",
996     [Only when instruments DB feature is enabled: default location of the DB file.]
997     )
998 schoenebeck 1432 AC_SUBST(config_default_instruments_db_file)
999 schoenebeck 1212
1000 schoenebeck 1364
1001 schoenebeck 554 ###########################################################################
1002 schoenebeck 714 # Automatic Benchmarks (to detect the best algorithms for the system)
1003    
1004     AC_LANG_SAVE
1005    
1006     if test "$config_signed_triang_algo" = "benchmark"; then
1007     echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1008     AC_LANG_CPLUSPLUS
1009     AC_TRY_RUN([
1010     #define SIGNED 1
1011     #define SILENT 1
1012 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1013 schoenebeck 714 ],
1014     triang_signed=0,
1015     triang_signed=$?,
1016     triang_signed=0
1017     )
1018     if test "$triang_signed" = "2"; then
1019     config_signed_triang_algo="intmath"
1020     echo "integer math"
1021     elif test "$triang_signed" = "3"; then
1022     config_signed_triang_algo="diharmonic"
1023     echo "di harmonics"
1024 senkov 720 elif test "$triang_signed" = "5"; then
1025     config_signed_triang_algo="intmathabs"
1026     echo "integer math using abs()"
1027 schoenebeck 714 else
1028     echo "Benchmark of signed triangular wave algorithms failed!"
1029     echo "Maybe you are doing cross compilation? In that case you have to select"
1030     echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1031     echo "Call './configure --help' for further information or read configure.in."
1032     exit -1;
1033     fi
1034 schoenebeck 1165 else
1035     case "$config_signed_triang_algo" in
1036     intmath)
1037     triang_signed=2 ;;
1038     diharmonic)
1039     triang_signed=3 ;;
1040     intmathabs)
1041     triang_signed=5 ;;
1042     esac
1043 schoenebeck 714 fi
1044 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1045 schoenebeck 714
1046     if test "$config_unsigned_triang_algo" = "benchmark"; then
1047     echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1048     AC_LANG_CPLUSPLUS
1049     AC_TRY_RUN([
1050     #define SIGNED 0
1051     #define SILENT 1
1052 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1053 schoenebeck 714 ],
1054     triang_unsigned=0,
1055     triang_unsigned=$?,
1056     triang_unsigned=0
1057     )
1058     if test "$triang_unsigned" = "2"; then
1059     config_unsigned_triang_algo="intmath"
1060     echo "integer math"
1061     elif test "$triang_unsigned" = "3"; then
1062     config_unsigned_triang_algo="diharmonic"
1063     echo "di harmonics"
1064 senkov 720 elif test "$triang_unsigned" = "5"; then
1065 schoenebeck 726 config_unsigned_triang_algo="intmathabs"
1066 senkov 720 echo "integer math using abs()"
1067 schoenebeck 714 else
1068     echo "Benchmark of unsigned triangular wave algorithms failed!"
1069     echo "Maybe you are doing cross compilation? In that case you have to select"
1070     echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1071     echo "Call './configure --help' for further information or read configure.in."
1072     exit -1;
1073     fi
1074 schoenebeck 1165 else
1075     case "$config_unsigned_triang_algo" in
1076     intmath)
1077     triang_unsigned=2 ;;
1078     diharmonic)
1079     triang_unsigned=3 ;;
1080     intmathabs)
1081     triang_unsigned=5 ;;
1082     esac
1083 schoenebeck 714 fi
1084 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1085 schoenebeck 714
1086     AC_LANG_RESTORE
1087    
1088    
1089     ###########################################################################
1090 schoenebeck 554 # Create Build Files
1091    
1092 schoenebeck 9 AM_CONFIG_HEADER(config.h)
1093 schoenebeck 697 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1094 schoenebeck 9
1095     AC_LANG_CPLUSPLUS
1096     AC_PROG_CXX
1097 persson 497
1098 persson 685 # some gcc 4.0 versions need -msse for SSE register allocations
1099     if test "$config_asm" = "yes"; then
1100     if test "$def_arch_x86" = 1; then
1101     CXXFLAGS="$CXXFLAGS -msse"
1102     fi
1103     fi
1104    
1105 persson 497 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1106     # this, the dlfcn.h check in am_prog_libtool may fail.
1107     AC_CHECK_HEADER(stdlib.h)
1108    
1109 schoenebeck 654 AC_OUTPUT( \
1110     Makefile \
1111     man/Makefile \
1112     man/linuxsampler.1 \
1113     src/Makefile \
1114 iliev 1161 src/db/Makefile \
1115 schoenebeck 654 src/network/Makefile \
1116     src/engines/Makefile \
1117     src/engines/gig/Makefile \
1118     src/engines/common/Makefile \
1119 schoenebeck 1321 src/common/Makefile \
1120 schoenebeck 654 src/testcases/Makefile \
1121     src/drivers/Makefile \
1122     src/drivers/audio/Makefile \
1123     src/drivers/midi/Makefile \
1124 schoenebeck 1375 src/plugins/Makefile \
1125 schoenebeck 654 linuxsampler.spec \
1126     debian/Makefile \
1127     Artwork/Makefile \
1128     scripts/Makefile \
1129     osx/Makefile \
1130 schoenebeck 1175 osx/linuxsampler.xcodeproj/Makefile \
1131 schoenebeck 654 Documentation/Makefile \
1132     Documentation/Engines/Makefile \
1133     Documentation/Engines/gig/Makefile \
1134 schoenebeck 697 linuxsampler.pc \
1135     Doxyfile \
1136 schoenebeck 654 )
1137 schoenebeck 554
1138 schoenebeck 1212 # resolve all nested variables in '${config_plugin_dir}'
1139     # (merely for providing a human readable summary below)
1140     while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1141     config_plugin_dir=`eval echo ${config_plugin_dir}`
1142     done
1143 schoenebeck 554
1144 schoenebeck 1212
1145 schoenebeck 554 ###########################################################################
1146     # Output All Configuration Options
1147    
1148     echo ""
1149     echo "#####################################################################"
1150     echo "# LinuxSampler Configuration #"
1151     echo "#-------------------------------------------------------------------#"
1152 schoenebeck 617 echo "# Assembly Optimizations: ${config_asm}"
1153 schoenebeck 554 echo "# Development Mode: ${config_dev_mode}"
1154     echo "# Debug Level: ${config_debug_level}"
1155     echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1156     echo "# Preload Samples: ${config_preload_samples}"
1157     echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1158     echo "# Maximum Events: ${config_max_events}"
1159     echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1160     echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1161     echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1162     echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1163     echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1164     echo "# Stream Size: ${config_stream_size}"
1165     echo "# Maximum Disk Streams: ${config_max_streams}"
1166     echo "# Maximum Voices: ${config_max_voices}"
1167 schoenebeck 738 echo "# Default Subfragment Size: ${config_subfragment_size}"
1168 schoenebeck 1005 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1169 schoenebeck 563 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1170 schoenebeck 714 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1171     echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1172 schoenebeck 554 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1173 schoenebeck 829 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1174     echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1175     echo "# Default Portamento Time: ${config_portamento_time_default} s"
1176 schoenebeck 554 echo "# Force Filter Usage: ${config_force_filter}"
1177     echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1178     echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1179     echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1180     echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1181     echo "# Override Filter Type: ${config_override_filter_type}"
1182 schoenebeck 563 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1183 iliev 716 echo "# Process Muted Channels: ${config_process_muted_channels}"
1184 schoenebeck 849 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1185 persson 830 echo "# Interpolate Volume: ${config_interpolate_volume}"
1186 schoenebeck 1364 echo "# Instruments database support: ${config_instruments_db}"
1187     if test "$config_instruments_db" = "yes"; then
1188     echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1189     fi
1190 schoenebeck 1212 echo "# Plugin Path: ${config_plugin_dir}"
1191 schoenebeck 554 echo "#-------------------------------------------------------------------#"
1192     echo "# Read './configure --help' or file 'configure.in' for details. #"
1193     echo "#####################################################################"
1194     echo ""
1195     echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1196     echo ""

  ViewVC Help
Powered by ViewVC