/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Annotation of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1956 - (hide annotations) (download)
Fri Jul 31 07:45:47 2009 UTC (14 years, 7 months ago) by schoenebeck
Original Path: linuxsampler/trunk/configure.in
File size: 54996 byte(s)
* preparations for release 1.0.0

1 schoenebeck 9 AC_INIT(configure.in)
2 schoenebeck 697
3     #------------------------------------------------------------------------------------
4     # LinuxSampler's / liblinuxsampler's "official" release version:
5    
6 schoenebeck 1956 LINUXSAMPLER_RELEASE_MAJOR=1
7     LINUXSAMPLER_RELEASE_MINOR=0
8     LINUXSAMPLER_RELEASE_BUILD=0
9 schoenebeck 697
10     #------------------------------------------------------------------------------------
11     # The following is the libtool / shared library version. This doesn't have to
12     # do anything with the release version. It MUST conform to the following rules:
13     #
14     # 1. Start with version information of `0:0:0' for each libtool library.
15     # 2. Update the version information only immediately before a public release of
16     # your software. More frequent updates are unnecessary, and only guarantee
17     # that the current interface number gets larger faster.
18     # 3. If the library source code has changed at all since the last update, then
19     # increment revision (`c:r:a' becomes `c:r+1:a').
20     # 4. If any interfaces have been added, removed, or changed since the last update,
21     # increment current, and set revision to 0.
22     # 5. If any interfaces have been added since the last public release, then increment
23     # age.
24     # 6. If any interfaces have been removed since the last public release, then set age
25     # to 0.
26    
27 schoenebeck 1956 LIBLINUXSAMPLER_LT_CURRENT=3
28 schoenebeck 697 LIBLINUXSAMPLER_LT_REVISION=0
29 schoenebeck 1956 LIBLINUXSAMPLER_LT_AGE=0
30 schoenebeck 697 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31    
32 schoenebeck 947 #------------------------------------------------------------------------------------
33     # the LSCP specification version this LinuSampler release complies with:
34    
35     LSCP_RELEASE_MAJOR=1
36 schoenebeck 1686 LSCP_RELEASE_MINOR=4
37 schoenebeck 947
38     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40    
41 schoenebeck 1741 AC_PROG_CXX
42 persson 1777 AC_LIBTOOL_WIN32_DLL
43 schoenebeck 697 AM_PROG_LIBTOOL
44    
45     AC_SUBST(SHLIB_VERSION_ARG)
46     AC_SUBST(SHARED_VERSION_INFO)
47    
48 schoenebeck 12 AC_C_BIGENDIAN
49 persson 1895 AC_CANONICAL_HOST
50 schoenebeck 9
51 schoenebeck 1639 PKG_PROG_PKG_CONFIG
52 schoenebeck 275
53 schoenebeck 554 ###########################################################################
54     # General Checks
55 schoenebeck 275
56 persson 1931 AM_CONDITIONAL(CROSS_COMPILING, test $cross_compiling = yes)
57    
58 schoenebeck 510 AC_MSG_CHECKING([whether x86 architecture])
59 schoenebeck 9 def_arch_x86=0
60 persson 1895 case $host_cpu in
61 persson 1794 "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
62 schoenebeck 9 echo "yes"
63     def_arch_x86=1;;
64     *)
65     echo "no";;
66     esac
67     AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
68    
69 schoenebeck 510 # determine the right gcc switch for CPU specific optimizations
70 schoenebeck 829 # (only if the user did not provide one)
71 schoenebeck 510 CXX_CPU_SWITCH=
72 schoenebeck 829 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
73 persson 1895 if test "$def_arch_x86" = 1 -a "$host_cpu" != "x86_64"; then
74     CXX_CPU_SWITCH="-march=$host_cpu"
75 schoenebeck 909 elif test "$target_cpu" = "ppc"; then
76 persson 1895 CXX_CPU_SWITCH="-arch=$host_cpu"
77 schoenebeck 829 fi
78 schoenebeck 510 fi
79     AC_SUBST([CXX_CPU_SWITCH])
80    
81 senoner 1502 # check if we're on MS Windows
82     AC_CHECK_HEADERS(
83     mmsystem.h,
84     have_windows=1,
85 persson 1895 have_windows=0,
86     [#include <windef.h>]
87 senoner 1502 )
88     AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
89    
90 schoenebeck 288 AC_MSG_CHECKING([whether UNIX98 compatible])
91     AC_LANG_SAVE
92     AC_LANG_C
93     AC_TRY_RUN([
94     #ifndef _GNU_SOURCE
95     #define _GNU_SOURCE 1
96     #endif
97     #include <features.h>
98     void main(void) {
99     #if _XOPEN_SOURCE >= 500
100     exit(0); /* UNIX98 compatible */
101     #else
102     exit(-1); /* not UNIX98 compatible */
103     #endif
104     }
105     ],
106     have_unix98="yes",
107     have_unix98="no",
108     have_unix98="no"
109     )
110     AC_LANG_RESTORE
111     AC_MSG_RESULT([$have_unix98])
112 senoner 1502 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
113 schoenebeck 288 if test "x$HAVE_UNIX98" = "x"; then
114     echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
115     echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
116     echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
117     echo "have a UNIX98 compatible system."
118     exit -1;
119     fi
120     fi
121    
122 wylder 822 # check for <features.h>
123     AC_CHECK_HEADERS(features.h)
124 wylder 821
125 schoenebeck 1454 # test for POSIX thread library
126     m4_ifdef([m4_include(m4/pthread.m4)],,
127     [sinclude([m4/pthread.m4])])
128     ACX_PTHREAD
129     LIBS="$PTHREAD_LIBS $LIBS"
130     CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
131     CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
132     CC="$PTHREAD_CC"
133 schoenebeck 852
134 schoenebeck 1454 # check for a bug in NPTL-enabled glibc
135     # (see Gentoo bug report #194076)
136     AC_ARG_ENABLE(nptl-bug-check,
137     [ --disable-nptl-bug-check
138     Disable check for a bug in certain NPTL-enabled
139     glibc versions that caused crashs.],
140     [config_check_nptl_bug="$enableval"],
141     [config_check_nptl_bug="yes"]
142     )
143     if test "$config_check_nptl_bug" = "yes"; then
144     m4_ifdef([m4_include(m4/nptl_bug.m4)],,
145     [sinclude([m4/nptl_bug.m4])])
146     ACX_NPTL_GLIBC_BUG([
147     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
148     echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
149     echo "probably crash due to this. Please report us the system you are"
150     echo "using and/or file a bug report to the bug tracking system of"
151     echo "your distribution."
152     echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
153     echo "well, you can try to circumvent this problem for now by setting"
154     echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
155     echo "should cause this test to pass."
156     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
157     AC_MSG_ERROR([possibly NPTL glibc bug detected])
158     ])
159     else
160     echo "NPTL glibc bug check disabled"
161     fi
162    
163 schoenebeck 1742 # FIXME: this is actually a dependency of libgig, not of LS directly, why
164     # isn't it hidden by libgig?
165     AC_CHECK_HEADERS(uuid/uuid.h)
166     AC_SEARCH_LIBS(uuid_generate, uuid)
167 schoenebeck 1454
168    
169 schoenebeck 1742
170 schoenebeck 852 ###########################################################################
171 schoenebeck 288 # Checks for available audio and MIDI systems / drivers
172     # (we throw an error if there's not at least one system for audio output and MIDI input available)
173 schoenebeck 852
174 schoenebeck 288 have_midi_input_driver="false"
175     have_audio_output_driver="false"
176    
177 schoenebeck 852 # ALSA
178     AC_ARG_ENABLE(alsa-driver,
179     [ --disable-alsa-driver
180     Disable support for the Advanced Linux Sound
181     Architecture (ALSA).],
182 schoenebeck 1360 [config_alsa_driver="$enableval"],
183 schoenebeck 852 [config_alsa_driver="yes"]
184 schoenebeck 18 )
185 schoenebeck 852 have_alsa=0
186     if test "$config_alsa_driver" = "yes"; then
187     AC_CHECK_HEADER(alsa/asoundlib.h,
188     AC_CHECK_LIB(asound, main,
189     have_alsa=1
190     ,
191     have_alsa=0
192     )
193     ,
194     have_alsa=0
195     )
196     if test "$have_alsa" = "1"; then
197     have_midi_input_driver="true"
198     have_audio_output_driver="true";
199     fi
200    
201     echo -n "checking Alsa version... "
202     AC_LANG_SAVE
203     AC_LANG_C
204     AC_TRY_RUN([
205     #include <alsa/asoundlib.h>
206     void main(void) {
207     /* ensure backward compatibility */
208     #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
209     #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
210     #endif
211     exit(SND_LIB_MAJOR);
212     }
213     ],
214     alsa_major=0,
215     alsa_major=$?,
216     alsa_major=0
217     )
218     AC_TRY_RUN([
219     #include <alsa/asoundlib.h>
220     void main(void) {
221     /* ensure backward compatibility */
222     #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
223     #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
224     #endif
225     exit(SND_LIB_MINOR);
226     }
227     ],
228     alsa_minor=0,
229     alsa_minor=$?,
230     alsa_minor=0
231     )
232     AC_TRY_RUN([
233     #include <alsa/asoundlib.h>
234     void main(void) {
235     /* ensure backward compatibility */
236     #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
237     #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
238     #endif
239     exit(SND_LIB_SUBMINOR);
240     }
241     ],
242     alsa_subminor=0,
243     alsa_subminor=$?,
244     alsa_subminor=0
245     )
246     AC_LANG_RESTORE
247     echo "$alsa_major.$alsa_minor.$alsa_subminor";
248     AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
249     AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
250     AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
251     else
252     echo "ALSA support disabled by configure script parameter"
253 schoenebeck 18 fi
254 schoenebeck 291 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
255 schoenebeck 288 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
256 schoenebeck 1876 config_have_alsa="no"
257     if test $have_alsa = "1"; then
258     config_have_alsa="yes"
259     fi
260 schoenebeck 18
261 schoenebeck 852 # JACK
262     AC_ARG_ENABLE(jack-driver,
263     [ --disable-jack-driver
264     Disable support for the Jack Audio Connection Kit
265     (JACK).],
266 schoenebeck 1360 [config_jack_driver="$enableval"],
267 schoenebeck 852 [config_jack_driver="yes"]
268 schoenebeck 18 )
269 schoenebeck 852 have_jack=0
270     if test "$config_jack_driver" = "yes"; then
271     PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
272     if test $have_jack = "1"; then
273     AC_SUBST(JACK_LIBS)
274     AC_SUBST(JACK_CFLAGS)
275 persson 1748 linuxsampler_save_LIBS=$LIBS
276     LIBS="$JACK_LIBS $LIBS"
277     AC_CHECK_FUNCS(jack_client_name_size jack_client_open)
278     LIBS=$linuxsampler_save_LIBS
279 schoenebeck 852 have_audio_output_driver="true";
280     fi
281 schoenebeck 33 else
282 schoenebeck 852 echo "JACK support disabled by configure script parameter"
283 schoenebeck 33 fi
284 schoenebeck 852 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
285     AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
286 schoenebeck 1876 config_have_jack="no"
287     if test $have_jack = "1"; then
288     config_have_jack="yes"
289     fi
290 schoenebeck 31
291 persson 1651 # JACK MIDI
292     have_jack_midi=0
293     if test $have_jack = "1"; then
294 persson 1652 linuxsampler_save_CFLAGS=$CFLAGS
295     linuxsampler_save_LIBS=$LIBS
296     CFLAGS="$JACK_CFLAGS $CFLAGS"
297     LIBS="$JACK_LIBS $LIBS"
298     AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
299     if test $have_jack_midi = "1"; then
300     AC_CHECK_FUNCS(jack_midi_get_event_count)
301     AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
302     jack_midi_clear_buffer(0, 0);
303     ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
304     [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
305     have_midi_input_driver="true"
306     fi
307     CFLAGS=$linuxsampler_save_CFLAGS
308     LIBS=$linuxsampler_save_LIBS
309 persson 1651 fi
310     AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
311     AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
312     [Define to 1 if you have JACK with MIDI support installed.])
313 schoenebeck 1876 config_have_jack_midi="no"
314     if test $have_jack_midi = "1"; then
315     config_have_jack_midi="yes"
316     fi
317 persson 1651
318 schoenebeck 838 # ARTS
319 schoenebeck 852 AC_ARG_ENABLE(arts-driver,
320     [ --disable-arts-driver
321     Disable support for the Analogue Realtime System
322     (aRts).],
323 schoenebeck 1360 [config_arts_driver="$enableval"],
324 schoenebeck 852 [config_arts_driver="yes"]
325     )
326     have_arts=0
327     if test "$config_arts_driver" = "yes"; then
328     m4_ifdef([m4_include(m4/arts.m4)],,
329     [sinclude([m4/arts.m4])])
330     AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
331     if test "$have_arts" = "1"; then
332     have_audio_output_driver="true"
333     fi
334     else
335     echo "ARTS support disabled by configure script parameter"
336 schoenebeck 838 fi
337     AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
338     AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
339 schoenebeck 1876 config_have_arts="no"
340     if test $have_arts = "1"; then
341     config_have_arts="yes"
342     fi
343 schoenebeck 838
344 senoner 1502 # ASIO AUDIO (Win32)
345     AC_ARG_ENABLE(asiosdk-dir,
346     [ --enable-asiosdk-dir
347     Directory where the ASIO SDK is located, this automatically
348     enables the compilation of the ASIO audio output driver.],
349     [config_asiosdk_dir="${enableval}"],
350     [config_asiosdk_dir="."]
351     )
352     AC_SUBST(config_asiosdk_dir)
353    
354     AC_ARG_ENABLE(asio-driver,
355     [ --disable-asio-driver
356     Disable support for the Windows ASIO driver.],
357     [config_asio_driver="$enableval"],
358     [config_asio_driver="yes"]
359     )
360     have_asio=0
361     ASIOSDK_BASEDIR=
362     if test "$config_asio_driver" = "yes"; then
363     asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
364     echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
365     if test -e $asiosdk_headerfile ; then
366     echo yes
367     have_asio=1
368     ASIOSDK_BASEDIR="$config_asiosdk_dir"
369     else
370     echo no
371     have_asio=0
372     fi
373     if test "$have_asio" = "1"; then
374     have_audio_output_driver="true"
375     fi
376     else
377     echo "Windows ASIO support disabled by configure script parameter"
378     fi
379     AC_SUBST(ASIOSDK_BASEDIR)
380     AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
381     AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
382 schoenebeck 1876 config_have_asio="no"
383     if test $have_asio = "1"; then
384     config_have_asio="yes"
385     fi
386 senoner 1502
387 schoenebeck 609 # MidiShare (Linux, OS X, Windows)
388 schoenebeck 852 AC_ARG_ENABLE(midishare-driver,
389     [ --disable-midishare-driver
390     Disable support for the MidiShare system.],
391 schoenebeck 1360 [config_midishare_driver="$enableval"],
392 schoenebeck 852 [config_midishare_driver="yes"]
393 schoenebeck 609 )
394 schoenebeck 852 have_midishare=0
395     if test "$config_midishare_driver" = "yes"; then
396     AC_CHECK_HEADER(MidiShare.h,
397     AC_CHECK_LIB(MidiShare, MidiCountEvs,
398     have_midishare=1,
399     have_midishare=0
400     )
401     ,
402     have_midishare=0
403     )
404     if test "$have_midishare" = "1"; then
405     have_midi_input_driver="true"
406     fi
407     else
408     echo "MidiShare support disabled by configure script parameter"
409 schoenebeck 609 fi
410     AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
411     AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
412 schoenebeck 1876 config_have_midishare="no"
413     if test $have_midishare = "1"; then
414     config_have_midishare="yes"
415     fi
416 schoenebeck 609
417     # CoreMIDI (OS X)
418 schoenebeck 852 AC_ARG_ENABLE(coremidi-driver,
419     [ --disable-coremidi-driver
420     Disable support for the Apple CoreMIDI system.],
421 schoenebeck 1360 [config_coremidi_driver="$enableval"],
422 schoenebeck 852 [config_coremidi_driver="yes"]
423 schoenebeck 609 )
424 schoenebeck 852 have_coremidi=0
425     if test "$config_coremidi_driver" = "yes"; then
426     AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
427     have_coremidi=1,
428     have_coremidi=0
429     )
430     if test "$have_coremidi" = "1"; then
431     have_midi_input_driver="true"
432     fi
433     else
434     echo "CoreMIDI support disabled by configure script parameter"
435 schoenebeck 609 fi
436     AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
437     AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
438 schoenebeck 1876 config_have_coremidi="no"
439     if test $have_coremidi = "1"; then
440     config_have_coremidi="yes"
441     fi
442 schoenebeck 609
443 iliev 1829 # CoreAudio (OS X)
444     AC_ARG_ENABLE(coreaudio-driver,
445     [ --disable-coreaudio-driver
446     Disable support for the Apple CoreAudio system.],
447     [config_coreaudio_driver="$enableval"],
448     [config_coreaudio_driver="yes"]
449     )
450     have_coreaudio=0
451     if test "$config_coreaudio_driver" = "yes"; then
452     AC_CHECK_HEADER(CoreAudio/CoreAudio.h,
453     have_coreaudio=1,
454     have_coreaudio=0
455     )
456     if test "$have_coreaudio" = "1"; then
457     have_audio_output_driver="true"
458     fi
459     else
460     echo "CoreAudio support disabled by configure script parameter"
461     fi
462     AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1")
463     AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.])
464 schoenebeck 1876 config_have_coreaudio="no"
465     if test $have_coreaudio = "1"; then
466     config_have_coreaudio="yes"
467     fi
468 iliev 1829
469 senoner 1502 # MME MIDI (Win32)
470     AC_ARG_ENABLE(mmemidi-driver,
471     [ --disable-mmemidi-driver
472     Disable support for the Windows MME MIDI system.],
473     [config_mmemidi_driver="$enableval"],
474     [config_mmemidi_driver="yes"]
475     )
476     have_mmemidi=0
477     if test "$config_mmemidi_driver" = "yes"; then
478     AC_CHECK_HEADERS(mmsystem.h,
479     have_mmemidi=1,
480     have_mmemidi=0
481     )
482     if test "$have_mmemidi" = "1"; then
483     have_midi_input_driver="true"
484     fi
485     else
486     echo "MME MIDI support disabled by configure script parameter"
487     fi
488     AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
489     AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
490 schoenebeck 1876 config_have_mme="no"
491     if test $have_mmemidi = "1"; then
492     config_have_mme="yes"
493     fi
494 senoner 1502
495 persson 1777 # DSSI
496     AC_CHECK_HEADERS(dssi.h,
497 schoenebeck 1876 config_have_dssi="yes",
498     config_have_dssi="no")
499     AM_CONDITIONAL(HAVE_DSSI, test $config_have_dssi = "yes")
500 persson 1777
501     # LV2
502 schoenebeck 1876 PKG_CHECK_MODULES(LV2, lv2core, config_have_lv2="yes", config_have_lv2="no")
503     if test $config_have_lv2 = "no"; then
504     AC_CHECK_HEADER(lv2.h, config_have_lv2="yes", config_have_lv2="no")
505 persson 1777 fi
506 schoenebeck 1876 AM_CONDITIONAL(HAVE_LV2, test $config_have_lv2 = "yes")
507 persson 1777
508     # VST
509     AC_ARG_ENABLE(vstsdk-dir,
510     [ --enable-vstsdk-dir
511     Directory where the VST SDK is located.
512     This automatically enables the compilation
513     of the VST plugin.],
514     [VSTSDK_DIR="${enableval}"],
515     [VSTSDK_DIR=]
516     )
517     AC_SUBST(VSTSDK_DIR)
518     AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
519 schoenebeck 1876 config_have_vst="no"
520     if test "x$VSTSDK_DIR" != "x"; then
521     config_have_vst="yes"
522     fi
523 persson 1777
524 iliev 1846 # AU
525     AC_CHECK_HEADERS(AudioUnit/AudioUnit.h,
526 schoenebeck 1876 config_have_au="yes",
527     config_have_au="no")
528     AM_CONDITIONAL(HAVE_AU, test $config_have_au = "yes")
529 iliev 1855 AM_CONDITIONAL(HAVE_AUFLAGS, test "$AUFLAGS" != "")
530 persson 1777
531 iliev 1846
532 schoenebeck 1364 # have we found at least one MIDI input and one audio output driver ?
533     if test "$have_midi_input_driver" = "false"; then
534     echo "No supported MIDI input system found!"
535     echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
536 persson 1652 echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
537 schoenebeck 1364 echo "If you think you have one of those available on your system, make sure you"
538     echo "also have the respective development (header) files installed."
539     exit -1;
540     fi
541     if test "$have_audio_output_driver" = "false"; then
542     echo "No supported audio output system found!"
543 persson 1652 echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
544 schoenebeck 1364 echo "driver at the moment!"
545     exit -1;
546     fi
547    
548    
549    
550     ###########################################################################
551     # Checks for various DLL libraries
552    
553 schoenebeck 504 # Check presence of libgig
554 schoenebeck 1956 libgig_version="3.3.0"
555 schoenebeck 504 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
556     if test "$HAVE_GIG" = "false"; then
557     echo "Required libgig version not found!"
558     echo "You need to have libgig version ${libgig_version} installed!"
559     exit -1;
560 schoenebeck 714 else
561     echo "yes, found libgig $libgig_version"
562 schoenebeck 504 fi
563     AC_SUBST(GIG_CFLAGS)
564     AC_SUBST(GIG_LIBS)
565    
566 schoenebeck 1364 # Instruments DB feature (requires SQLite 3.3)
567     AC_ARG_ENABLE(instruments-db,
568     [ --disable-instruments-db
569     Disable compilation of the sampler's instruments
570     database feature. You need to have SQLite 3.3
571     or younger installed for this feature.],
572     [config_instruments_db="$enableval"],
573     [config_instruments_db="yes"]
574     )
575     HAVE_SQLITE3=0;
576     if test "$config_instruments_db" = "yes"; then
577     # Check presence of sqlite3
578     sqlite_version="3.3"
579     PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
580     AC_SUBST(SQLITE3_LIBS)
581     AC_SUBST(SQLITE3_CFLAGS)
582     if test $HAVE_SQLITE3 = false; then
583     HAVE_SQLITE3=0
584     config_instruments_db="no"
585     echo "*** Required sqlite version not found!"
586     echo "*** You need to have sqlite version ${sqlite_version} or higher"
587     echo "*** for instruments database support to be enabled."
588     echo "*** Support for instruments DB will be disabled!"
589     else
590     HAVE_SQLITE3=1
591     fi
592 senkov 397 else
593 schoenebeck 1364 echo "Instruments DB feature disabled by configure script parameter"
594 senkov 397 fi
595     AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
596 schoenebeck 1364 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
597 schoenebeck 31
598 schoenebeck 288
599    
600 schoenebeck 554 ###########################################################################
601     # Handle Configuration Options
602    
603     # TODO: should we use AC_ARG_VAR(variable, description) instead?
604    
605 schoenebeck 617 AC_ARG_ENABLE(asm,
606 schoenebeck 1259 [ --disable-asm
607 schoenebeck 738 Enable hand-crafted assembly optimizations
608 schoenebeck 1259 (default=on). LinuxSampler provides CPU specific
609     assembly optimizations. This is currently limited
610     to just enter a fast (denormal) FPU mode on x86
611     platforms. There are currently no synthesis core
612     assembly optimizations anymore since LS 0.4.0],
613 schoenebeck 1360 [config_asm="$enableval"],
614 schoenebeck 1259 [config_asm="yes"]
615 schoenebeck 617 )
616     if test "$config_asm" = "yes"; then
617 schoenebeck 1259 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
618 schoenebeck 617 fi
619    
620 schoenebeck 554 AC_ARG_ENABLE(dev-mode,
621 schoenebeck 1424 [ --enable-dev-mode
622     Enable development mode (default=off). In that mode
623 schoenebeck 554 we do some extra sanity checks here and there.
624     This helps to spot possible problems, but reduces
625     efficiency a bit],
626 schoenebeck 1360 [config_dev_mode="$enableval"],
627 schoenebeck 1424 [config_dev_mode="no"]
628 schoenebeck 554 )
629     if test "$config_dev_mode" = "yes"; then
630     AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
631     fi
632    
633     AC_ARG_ENABLE(debug-level,
634     [ --enable-debug-level
635     Specify verbosity of console messages (default=1).
636     The higher the value, the higher will be verbosity.
637     A value of 0 means no console output at all.
638     There's not really an upper limit but the usual
639     level of all messages is currently somewhere less
640     than 10.],
641     [config_debug_level="${enableval}"],
642     [config_debug_level="1"]
643     )
644     AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
645    
646     AC_ARG_ENABLE(rt-exceptions,
647     [ --enable-rt-exceptions
648     Enable exceptions in the realtime thread
649     (default=no). If this is enabled, exceptions will
650     be thrown on critical errors in the realtime
651     context as well. Otherwise if disabled
652     segmentation faults will be forced by the
653     application on critical errors.],
654 schoenebeck 1360 [config_rt_exceptions="$enableval"],
655 schoenebeck 554 [config_rt_exceptions="no"]
656     )
657     if test "$config_rt_exceptions" = "yes"; then
658     AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
659     fi
660    
661 nagata 1649 AC_ARG_ENABLE(pthread-testcancel,
662     [ --enable-pthread-testcancel
663 schoenebeck 1742 Enable pthread_testcancel() calls and avoid asynchronous
664 nagata 1649 cancel of pthreads (default=no).],
665     [config_pthread_testcancel="$enableval"],
666     [config_pthread_testcancel="no"]
667     )
668     if test "$config_pthread_testcancel" = "yes"; then
669     AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
670     fi
671    
672 schoenebeck 554 AC_ARG_ENABLE(preload-samples,
673     [ --enable-preload-samples
674     Due to seeking and latency issues with hard drives
675     we have to cache a small part of samples' head in
676     RAM (default=32768). The higher this value the
677     more memory will be occupied for each sample, but
678     the safer this will be in regards of possible
679     droputs. A 'good' value depends on the running
680     system and usage dependant factors.],
681     [config_preload_samples="${enableval}"],
682     [config_preload_samples="32768"]
683     )
684     AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
685    
686     AC_ARG_ENABLE(max-pitch,
687     [ --enable-max-pitch
688     Specify the maximum allowed pitch value in octaves
689     (default=4). To lower memory usage you might want
690     set a smaller value.],
691     [config_max_pitch="${enableval}"],
692     [config_max_pitch="4"]
693     )
694     AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
695    
696     AC_ARG_ENABLE(max-events,
697     [ --enable-max-events
698     Specify the maximum allowed amount of events to be
699     processed per fragment (default=1024).],
700     [config_max_events="${enableval}"],
701     [config_max_events="1024"]
702     )
703     AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
704    
705     AC_ARG_ENABLE(eg-bottom,
706     [ --enable-eg-bottom
707     Bottom limit of envelope generators
708     (default=0.001). Certain kinds of curve types like
709     exponential curves converge against 0 but never
710     reach 0. So we have to define a certain low value
711     after which we should consider all smaller values
712     to be 'almost zero'. The smaller this value, the
713     longer will voices survive in EG's release stage
714     and thus waste voices. If this value is too high
715     will cause click sounds though.],
716     [config_eg_bottom="${enableval}"],
717     [config_eg_bottom="0.001"]
718     )
719     AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
720    
721     AC_ARG_ENABLE(eg-min-release-time,
722     [ --enable-eg-min-release-time
723     Specify the lowest allowed release time in seconds
724     (default=0.0025). This value will also be used to
725     ramp down voices on voice stealing. This value
726     should always be less than the period time of the
727     used audio driver, as in case of voice stealing
728     the killed voice needs to be completely ramped
729     down in the same fragment.],
730     [config_eg_min_release_time="${enableval}"],
731     [config_eg_min_release_time="0.0025"]
732     )
733     AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
734    
735     AC_ARG_ENABLE(refill-streams,
736     [ --enable-refill-streams
737     Number of streams that should be refilled in each
738     disk thread cycle (default=4).],
739     [config_refill_streams="${enableval}"],
740     [config_refill_streams="4"]
741     )
742     AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
743    
744     AC_ARG_ENABLE(stream-min-refill,
745     [ --enable-stream-min-refill
746     Minimum refill size for disk streams (default=1024).
747     The disk thread will go to sleep for a while if no
748     stream had to be refilled more than this value in
749     a disk thread cycle.],
750     [config_stream_min_refill="${enableval}"],
751     [config_stream_min_refill="1024"]
752     )
753     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
754    
755     AC_ARG_ENABLE(stream-max-refill,
756     [ --enable-stream-max-refill
757     Maximum refill size for disk streams
758     (default=65536). The disk thread will refill
759     each stream only by a size of this value per
760     disk thread cycle.],
761     [config_stream_max_refill="${enableval}"],
762     [config_stream_max_refill="65536"]
763     )
764     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
765    
766     AC_ARG_ENABLE(stream-size,
767     [ --enable-stream-size
768     Size of each stream's ring buffer in sample points
769     (default=262144).],
770     [config_stream_size="${enableval}"],
771     [config_stream_size="262144"]
772     )
773     AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
774    
775     AC_ARG_ENABLE(max-streams,
776     [ --enable-max-streams
777 schoenebeck 1800 Initial maximum amount of disk streams
778     (default=90). This value can be changed at
779     runtime. It should always be higher than the
780     maximum amount of voices.],
781 schoenebeck 554 [config_max_streams="${enableval}"],
782     [config_max_streams="90"]
783     )
784 schoenebeck 1800 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
785 schoenebeck 554
786     AC_ARG_ENABLE(max-voices,
787     [ --enable-max-voices
788 schoenebeck 1800 Initial maximum amount of voices (default=64).
789     This value can be changed at runtime. It should
790     always be lower than the maximum amount of disk
791     streams.],
792 schoenebeck 554 [config_max_voices="${enableval}"],
793     [config_max_voices="64"]
794     )
795 schoenebeck 1800 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
796 schoenebeck 554
797 schoenebeck 738 AC_ARG_ENABLE(subfragment-size,
798     [ --enable-subfragment-size
799     Every audio fragment will be splitted into
800     subfragments. Where each subfragment renders
801     audio with constant synthesis parameters. This is
802     done for efficiency reasons. This parameter
803     defines the default size of a subfragment in
804     sample points. A large value means less CPU time
805     whereas a low value means better audio quality
806     (default=32).],
807     [config_subfragment_size="${enableval}"],
808     [config_subfragment_size="32"]
809     )
810     AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
811    
812 schoenebeck 1005 AC_ARG_ENABLE(global-attenuation-default,
813     [ --enable-global-attenuation-default
814 schoenebeck 781 To prevent clipping all samples will be lowered
815 schoenebeck 1005 in amplitude by this given default factor (can
816     be overridden at runtime).
817 schoenebeck 781 (default=0.35)],
818 schoenebeck 1005 [config_global_attenuation_default="${enableval}"],
819     [config_global_attenuation_default="0.35"]
820 schoenebeck 781 )
821 schoenebeck 1005 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
822 schoenebeck 781
823 schoenebeck 554 AC_ARG_ENABLE(voice-steal-algo,
824     [ --enable-voice-steal-algo
825     Voice stealing algorithm to be used. Currently
826     available options:
827     none:
828     Disable voice stealing completely.
829 schoenebeck 563 oldestvoiceonkey (default):
830 schoenebeck 554 Try to kill a voice on the same key first,
831     if no success, proceed with the oldest key.
832 schoenebeck 563 oldestkey:
833 schoenebeck 554 Try to kill a voice from the oldest active
834     key.],
835     [ if test ! "(" "${enableval}" = "none" \
836     -o "${enableval}" = "oldestvoiceonkey" \
837     -o "${enableval}" = "oldestkey" ")" ; then
838     AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
839     else
840     config_voice_steal_algo="${enableval}"
841 schoenebeck 579 fi
842 schoenebeck 554 ],
843 schoenebeck 563 [config_voice_steal_algo="oldestvoiceonkey"]
844 schoenebeck 554 )
845     AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
846    
847     AC_ARG_ENABLE(sysex-buffer-size,
848     [ --enable-sysex-buffer-size
849     System Exclusive Message buffer size in kB
850     (default=2048).],
851     [config_sysex_buffer_size="${enableval}"],
852     [config_sysex_buffer_size="2048"]
853     )
854     AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
855    
856     AC_ARG_ENABLE(force-filter,
857     [ --enable-force-filter
858     If enabled will force filter to be used even if
859     no usage was define in instrument patch files.
860     (default=no).],
861 schoenebeck 1360 [config_force_filter="$enableval"],
862 schoenebeck 554 [config_force_filter="no"]
863     )
864     if test "$config_force_filter" = "yes"; then
865     AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
866     fi
867    
868     AC_ARG_ENABLE(filter-cutoff-min,
869     [ --enable-filter-cutoff-min
870     Minimum filter cutoff frequency in Hz
871     (default=100.0).],
872     [config_filter_cutoff_min="${enableval}"],
873     [config_filter_cutoff_min="100.0"]
874     )
875     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
876    
877     AC_ARG_ENABLE(filter-cutoff-max,
878     [ --enable-filter-cutoff-max
879     Maximum filter cutoff frequency in Hz
880     (default=10000.0).],
881     [config_filter_cutoff_max="${enableval}"],
882     [config_filter_cutoff_max="10000.0"]
883     )
884     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
885    
886     AC_ARG_ENABLE(override-cutoff-ctrl,
887     [ --enable-override-cutoff-ctrl
888     Override filter cutoff MIDI controller (default=no).
889     Note: you have to define the MIDI controller number
890     here, it's not a boolean parameter type! If this
891     option is used, controller number given by
892     instrument patch will be ignored and instead this
893     supplied value will be used.],
894     [config_override_cutoff_ctrl="${enableval}"],
895     [config_override_cutoff_ctrl="no"]
896     )
897     if test ! "$config_override_cutoff_ctrl" = "no"; then
898     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
899     fi
900    
901     AC_ARG_ENABLE(override-resonance-ctrl,
902     [ --enable-override-resonance-ctrl
903     Override filter resonance MIDI controller
904     (default=no). Note: you have to define the MIDI
905     controller number here, it's not a boolean
906     parameter type! If this option is used, controller
907     number given by instrument patch will be ignored
908     and instead this supplied value will be used.],
909     [config_override_resonance_ctrl="${enableval}"],
910     [config_override_resonance_ctrl="no"]
911     )
912     if test ! "$config_override_resonance_ctrl" = "no"; then
913     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
914     fi
915    
916     AC_ARG_ENABLE(override-filter-type,
917     [ --enable-override-filter-type
918     Override filter type (default=no). Options:
919     hp: for highpass
920     bp: for bandpass
921     br: for bandreject
922     lp: for lowpass
923     lpt: for lowpass turbo],
924     [ if test "${enableval}" = "hp" ; then
925     config_override_filter_type="::gig::vcf_type_highpass"
926     elif test "${enableval}" = "bp" ; then
927     config_override_filter_type="::gig::vcf_type_bandpass"
928     elif test "${enableval}" = "br" ; then
929     config_override_filter_type="::gig::vcf_type_bandreject"
930     elif test "${enableval}" = "lp" ; then
931     config_override_filter_type="::gig::vcf_type_lowpass"
932     elif test "${enableval}" = "lpt" ; then
933     config_override_filter_type="::gig::vcf_type_lowpassturbo"
934     elif test ! "${enableval}" = "no"; then
935     AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
936 schoenebeck 579 fi
937 schoenebeck 554 ],
938     [config_override_filter_type="no"]
939     )
940     if test ! "$config_override_filter_type" = "no"; then
941     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
942     fi
943    
944 schoenebeck 563 AC_ARG_ENABLE(gs-checksum,
945     [ --enable-gs-checksum
946     Enable Roland General Synth SysEx checksum check
947     (default=no). If this is enabled, all GS SysEx
948     messages which do not provide a correct checksum
949     will be ignored. This is disabled by default as
950     not all devices honor GS checksums.],
951 schoenebeck 1360 [config_assert_gs_sysex_checksum="$enableval"],
952 schoenebeck 563 [config_assert_gs_sysex_checksum="no"]
953     )
954     if test "config_assert_gs_sysex_checksum" = "yes"; then
955     AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
956     fi
957    
958 schoenebeck 829 AC_ARG_ENABLE(portamento-time-min,
959     [ --enable-portamento-time-min
960     Minimum Portamento time in seconds
961     (default=0.1).],
962     [config_portamento_time_min="${enableval}"],
963     [config_portamento_time_min="0.1"]
964     )
965     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
966    
967     AC_ARG_ENABLE(portamento-time-max,
968     [ --enable-portamento-time-max
969     Maximum Portamento time in seconds
970     (default=32).],
971     [config_portamento_time_max="${enableval}"],
972     [config_portamento_time_max="32"]
973     )
974     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
975    
976     AC_ARG_ENABLE(portamento-time-default,
977     [ --enable-portamento-time-default
978     Default Portamento time in seconds
979     (default=1).],
980     [config_portamento_time_default="${enableval}"],
981     [config_portamento_time_default="1"]
982     )
983     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
984    
985 schoenebeck 714 AC_ARG_ENABLE(signed-triang-algo,
986     [ --enable-signed-triang-algo
987     Signed triangular wave algorithm to be used (e.g. for LFOs).
988     Currently available options:
989     intmath:
990     Uses integer math without any branch will then be
991     converted to floating point value for each sample point.
992     This int->float conversion might hurt on some systems.
993 senkov 720 intmathabs:
994     Similar to intmath but uses abs() function.
995     Depending on compiler and platrofm this could
996     perform better than integer math as it avoids
997 schoenebeck 1360 an extra integer multiply instruction.
998 schoenebeck 714 diharmonic:
999     The triangular wave will be approximated by adding two
1000     sinusoidials. This solution might especially hurt on
1001     systems with weak floating point unit.
1002     benchmark (default):
1003     This is not an algorithm. Use this option if the
1004     appropriate algorithm should be automatically
1005     chosen by the configure script by performing a
1006     benchmark between the algorithms mentioned above.
1007     This will NOT work for cross compilation!],
1008     [ if test ! "(" "${enableval}" = "intmath" \
1009 senkov 720 -o "${enableval}" = "intmathabs" \
1010 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
1011     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
1012     else
1013     config_signed_triang_algo="${enableval}"
1014     fi
1015     ],
1016     [config_signed_triang_algo="benchmark"]
1017     )
1018 schoenebeck 563
1019 schoenebeck 714 AC_ARG_ENABLE(unsigned-triang-algo,
1020     [ --enable-unsigned-triang-algo
1021     Unsigned triangular wave algorithm to be used (e.g. for LFOs).
1022     Currently available options:
1023     intmath:
1024     Uses integer math without any branch will then be
1025     converted to floating point value for each sample point.
1026     This int->float conversion might hurt on some systems.
1027 senkov 720 intmathabs:
1028     Similar to intmath but uses abs() function.
1029     Depending on compiler and platrofm this could
1030     perform better than integer math as it avoids
1031 schoenebeck 1360 an extra integer multiply instruction.
1032 schoenebeck 714 diharmonic:
1033     The triangular wave will be approximated by adding two
1034     sinusoidials. This solution might especially hurt on
1035     systems with weak floating point unit.
1036     benchmark (default):
1037     This is not an algorithm. Use this option if the
1038     appropriate algorithm should be automatically
1039     chosen by the configure script by performing a
1040     benchmark between the algorithms mentioned above.
1041     This will NOT work for cross compilation!],
1042     [ if test ! "(" "${enableval}" = "intmath" \
1043 senkov 720 -o "${enableval}" = "intmathabs" \
1044 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
1045     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
1046     else
1047     config_unsigned_triang_algo="${enableval}"
1048     fi
1049     ],
1050     [config_unsigned_triang_algo="benchmark"]
1051     )
1052    
1053 iliev 716 AC_ARG_ENABLE(process-muted-channels,
1054     [ --enable-process-muted-channels
1055     Enable processing of muted channels (default=no).
1056     In that mode all MIDI events in the muted channels
1057     will be processed. This will provide information
1058     about the active voices in the muted channels and
1059     will not discard notes, triggered in mute mode,
1060     when the channel is unmuted. But also will reduce
1061     the efficiency.],
1062 schoenebeck 1360 [config_process_muted_channels="$enableval"],
1063 iliev 716 [config_process_muted_channels="no"]
1064     )
1065     if test "$config_process_muted_channels" = "yes"; then
1066     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
1067     fi
1068 schoenebeck 714
1069 schoenebeck 849 AC_ARG_ENABLE(process-all-notes-off,
1070     [ --disable-process-all-notes-off
1071     Disable interpretation of All-Notes-Off MIDI
1072     messages (default=on). By default LS will release
1073     all voices whenever it receives an All-Notes-Off
1074     MIDI message. You can disable this behavior, so
1075     that LS simply ignores such messages.],
1076 schoenebeck 1360 [config_process_all_notes_off="$enableval"],
1077 schoenebeck 849 [config_process_all_notes_off="yes"]
1078     )
1079     if test "$config_process_all_notes_off" = "yes"; then
1080     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
1081     fi
1082    
1083 persson 830 AC_ARG_ENABLE(interpolate-volume,
1084     [ --disable-interpolate-volume
1085     Disable interpolation of volume modulation
1086     (default=on). With this enabled, the volume changes
1087     generated by for example the envelope generator
1088     will be smoother, minimizing the risk for audio
1089     clicks. Disable it to reduce CPU usage.],
1090 schoenebeck 1360 [config_interpolate_volume="$enableval"],
1091 persson 830 [config_interpolate_volume="yes"]
1092     )
1093     if test "$config_interpolate_volume" = "yes"; then
1094     AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
1095     fi
1096 iliev 716
1097 schoenebeck 1762 AC_ARG_ENABLE(master-volume-sysex-by-port,
1098     [ --enable-master-volume-sysex-by-port
1099     Whether global volume sysex message should be
1100     applied globally to the whole sampler or only to
1101     the sampler channels connected to the same MIDI
1102     input port on which the sysex message arrived on.
1103     By default global volume sysex messages apply
1104     globally to the whole sampler, since many MIDI
1105     devices behave that way.],
1106     [config_master_volume_sysex_by_port="$enableval"],
1107     [config_master_volume_sysex_by_port="no"]
1108     )
1109     if test "$config_master_volume_sysex_by_port" = "yes"; then
1110     AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
1111     fi
1112    
1113 schoenebeck 1212 AC_ARG_ENABLE(plugin-dir,
1114     [ --enable-plugin-dir
1115     Directory where the sampler shall look for potential plugins,
1116     that is 3rd party shared libraries that should be loaded by
1117     the sampler on startup. By default the sampler will search
1118     for plugins in the subdirectory "plugins" below its own
1119     library directory.
1120     (i.e. /usr/local/lib/linuxsampler/plugins)],
1121     [config_plugin_dir="${enableval}"],
1122     [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1123     )
1124     AC_SUBST(config_plugin_dir)
1125 persson 830
1126 schoenebeck 1364 AC_ARG_ENABLE(default-instruments-db-location,
1127     [ --enable-default-instruments-db-location
1128     Only when instruments DB feature is enabled: file name
1129     which shall be taken as default location of the
1130     instruments DB file. This location can still be
1131     overridden at runtime with a command line switch.
1132     (default: /var/lib/linuxsampler/instruments.db)],
1133     [config_default_instruments_db_file="${enableval}"],
1134     [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1135     )
1136     AC_DEFINE_UNQUOTED(
1137     CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1138     "$config_default_instruments_db_file",
1139     [Only when instruments DB feature is enabled: default location of the DB file.]
1140     )
1141 schoenebeck 1432 AC_SUBST(config_default_instruments_db_file)
1142 schoenebeck 1212
1143 schoenebeck 1364
1144 schoenebeck 554 ###########################################################################
1145 schoenebeck 714 # Automatic Benchmarks (to detect the best algorithms for the system)
1146    
1147     AC_LANG_SAVE
1148    
1149     if test "$config_signed_triang_algo" = "benchmark"; then
1150     echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1151     AC_LANG_CPLUSPLUS
1152     AC_TRY_RUN([
1153     #define SIGNED 1
1154     #define SILENT 1
1155 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1156 schoenebeck 714 ],
1157     triang_signed=0,
1158     triang_signed=$?,
1159     triang_signed=0
1160     )
1161     if test "$triang_signed" = "2"; then
1162     config_signed_triang_algo="intmath"
1163     echo "integer math"
1164     elif test "$triang_signed" = "3"; then
1165     config_signed_triang_algo="diharmonic"
1166     echo "di harmonics"
1167 senkov 720 elif test "$triang_signed" = "5"; then
1168     config_signed_triang_algo="intmathabs"
1169     echo "integer math using abs()"
1170 schoenebeck 714 else
1171     echo "Benchmark of signed triangular wave algorithms failed!"
1172     echo "Maybe you are doing cross compilation? In that case you have to select"
1173     echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1174     echo "Call './configure --help' for further information or read configure.in."
1175     exit -1;
1176     fi
1177 schoenebeck 1165 else
1178     case "$config_signed_triang_algo" in
1179     intmath)
1180     triang_signed=2 ;;
1181     diharmonic)
1182     triang_signed=3 ;;
1183     intmathabs)
1184     triang_signed=5 ;;
1185     esac
1186 schoenebeck 714 fi
1187 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1188 schoenebeck 714
1189     if test "$config_unsigned_triang_algo" = "benchmark"; then
1190     echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1191     AC_LANG_CPLUSPLUS
1192     AC_TRY_RUN([
1193     #define SIGNED 0
1194     #define SILENT 1
1195 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1196 schoenebeck 714 ],
1197     triang_unsigned=0,
1198     triang_unsigned=$?,
1199     triang_unsigned=0
1200     )
1201     if test "$triang_unsigned" = "2"; then
1202     config_unsigned_triang_algo="intmath"
1203     echo "integer math"
1204     elif test "$triang_unsigned" = "3"; then
1205     config_unsigned_triang_algo="diharmonic"
1206     echo "di harmonics"
1207 senkov 720 elif test "$triang_unsigned" = "5"; then
1208 schoenebeck 726 config_unsigned_triang_algo="intmathabs"
1209 senkov 720 echo "integer math using abs()"
1210 schoenebeck 714 else
1211     echo "Benchmark of unsigned triangular wave algorithms failed!"
1212     echo "Maybe you are doing cross compilation? In that case you have to select"
1213     echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1214     echo "Call './configure --help' for further information or read configure.in."
1215     exit -1;
1216     fi
1217 schoenebeck 1165 else
1218     case "$config_unsigned_triang_algo" in
1219     intmath)
1220     triang_unsigned=2 ;;
1221     diharmonic)
1222     triang_unsigned=3 ;;
1223     intmathabs)
1224     triang_unsigned=5 ;;
1225     esac
1226 schoenebeck 714 fi
1227 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1228 schoenebeck 714
1229     AC_LANG_RESTORE
1230    
1231    
1232     ###########################################################################
1233 schoenebeck 554 # Create Build Files
1234    
1235 schoenebeck 9 AM_CONFIG_HEADER(config.h)
1236 schoenebeck 697 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1237 schoenebeck 9
1238     AC_LANG_CPLUSPLUS
1239 persson 497
1240     # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1241     # this, the dlfcn.h check in am_prog_libtool may fail.
1242     AC_CHECK_HEADER(stdlib.h)
1243    
1244 schoenebeck 654 AC_OUTPUT( \
1245     Makefile \
1246     man/Makefile \
1247     man/linuxsampler.1 \
1248     src/Makefile \
1249 iliev 1161 src/db/Makefile \
1250 schoenebeck 654 src/network/Makefile \
1251     src/engines/Makefile \
1252     src/engines/gig/Makefile \
1253     src/engines/common/Makefile \
1254 schoenebeck 1722 src/effects/Makefile \
1255 schoenebeck 1321 src/common/Makefile \
1256 schoenebeck 654 src/testcases/Makefile \
1257     src/drivers/Makefile \
1258     src/drivers/audio/Makefile \
1259     src/drivers/midi/Makefile \
1260 schoenebeck 1375 src/plugins/Makefile \
1261 persson 1777 src/hostplugins/Makefile \
1262     src/hostplugins/dssi/Makefile \
1263     src/hostplugins/lv2/Makefile \
1264     src/hostplugins/vst/Makefile \
1265 iliev 1846 src/hostplugins/au/Makefile \
1266 schoenebeck 654 linuxsampler.spec \
1267     debian/Makefile \
1268     Artwork/Makefile \
1269     scripts/Makefile \
1270     osx/Makefile \
1271 schoenebeck 1175 osx/linuxsampler.xcodeproj/Makefile \
1272 schoenebeck 654 Documentation/Makefile \
1273     Documentation/Engines/Makefile \
1274     Documentation/Engines/gig/Makefile \
1275 schoenebeck 697 linuxsampler.pc \
1276     Doxyfile \
1277 schoenebeck 654 )
1278 schoenebeck 554
1279 schoenebeck 1212 # resolve all nested variables in '${config_plugin_dir}'
1280     # (merely for providing a human readable summary below)
1281     while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1282     config_plugin_dir=`eval echo ${config_plugin_dir}`
1283     done
1284 schoenebeck 554
1285 schoenebeck 1212
1286 schoenebeck 554 ###########################################################################
1287     # Output All Configuration Options
1288    
1289     echo ""
1290     echo "#####################################################################"
1291     echo "# LinuxSampler Configuration #"
1292     echo "#-------------------------------------------------------------------#"
1293 schoenebeck 1876 echo "# Release Version: ${LINUXSAMPLER_RELEASE_MAJOR}.${LINUXSAMPLER_RELEASE_MINOR}.${LINUXSAMPLER_RELEASE_BUILD}"
1294     echo "# LSCP Version: ${LSCP_RELEASE_MAJOR}.${LSCP_RELEASE_MINOR}"
1295     echo "#-------------------------------------------------------------------"
1296 schoenebeck 617 echo "# Assembly Optimizations: ${config_asm}"
1297 schoenebeck 554 echo "# Development Mode: ${config_dev_mode}"
1298     echo "# Debug Level: ${config_debug_level}"
1299     echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1300     echo "# Preload Samples: ${config_preload_samples}"
1301     echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1302     echo "# Maximum Events: ${config_max_events}"
1303     echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1304     echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1305     echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1306     echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1307     echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1308     echo "# Stream Size: ${config_stream_size}"
1309 schoenebeck 1800 echo "# Default Maximum Disk Streams: ${config_max_streams}"
1310     echo "# Default Maximum Voices: ${config_max_voices}"
1311 schoenebeck 738 echo "# Default Subfragment Size: ${config_subfragment_size}"
1312 schoenebeck 1005 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1313 schoenebeck 563 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1314 schoenebeck 714 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1315     echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1316 schoenebeck 554 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1317 schoenebeck 829 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1318     echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1319     echo "# Default Portamento Time: ${config_portamento_time_default} s"
1320 schoenebeck 554 echo "# Force Filter Usage: ${config_force_filter}"
1321     echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1322     echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1323     echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1324     echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1325     echo "# Override Filter Type: ${config_override_filter_type}"
1326 schoenebeck 563 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1327 iliev 716 echo "# Process Muted Channels: ${config_process_muted_channels}"
1328 schoenebeck 849 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1329 schoenebeck 1762 echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
1330 persson 830 echo "# Interpolate Volume: ${config_interpolate_volume}"
1331 schoenebeck 1364 echo "# Instruments database support: ${config_instruments_db}"
1332     if test "$config_instruments_db" = "yes"; then
1333     echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1334     fi
1335 schoenebeck 1212 echo "# Plugin Path: ${config_plugin_dir}"
1336 schoenebeck 1876 echo "#-------------------------------------------------------------------"
1337     echo "# MIDI Input Drivers:"
1338     echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack_midi}, CoreMIDI: ${config_have_coremidi}, MME: ${config_have_mme}, MidiShare: ${config_have_midishare}"
1339     echo "#-------------------------------------------------------------------"
1340     echo "# Audio Output Drivers:"
1341     echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack}, ARTS: ${config_have_arts}, CoreAudio: ${config_have_coreaudio}, ASIO: ${config_have_asio}"
1342     echo "#-------------------------------------------------------------------"
1343     echo "# Building sampler as plugin for following host standards:"
1344     echo "# DSSI: ${config_have_dssi}, LV2: ${config_have_lv2}, VST: ${config_have_vst}, AU: ${config_have_au}"
1345 schoenebeck 554 echo "#-------------------------------------------------------------------#"
1346     echo "# Read './configure --help' or file 'configure.in' for details. #"
1347     echo "#####################################################################"
1348     echo ""
1349     echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1350     echo ""

  ViewVC Help
Powered by ViewVC