/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Annotation of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 2124 - (hide annotations) (download)
Sat Sep 18 09:24:41 2010 UTC (13 years, 6 months ago) by schoenebeck
Original Path: linuxsampler/trunk/configure.in
File size: 56649 byte(s)
* implemented support for internal LADSPA effects (work in progress)

1 schoenebeck 9 AC_INIT(configure.in)
2 schoenebeck 697
3     #------------------------------------------------------------------------------------
4     # LinuxSampler's / liblinuxsampler's "official" release version:
5    
6 schoenebeck 1956 LINUXSAMPLER_RELEASE_MAJOR=1
7     LINUXSAMPLER_RELEASE_MINOR=0
8 schoenebeck 2124 LINUXSAMPLER_RELEASE_BUILD=0.cvs6
9 schoenebeck 697
10     #------------------------------------------------------------------------------------
11     # The following is the libtool / shared library version. This doesn't have to
12     # do anything with the release version. It MUST conform to the following rules:
13     #
14     # 1. Start with version information of `0:0:0' for each libtool library.
15     # 2. Update the version information only immediately before a public release of
16     # your software. More frequent updates are unnecessary, and only guarantee
17     # that the current interface number gets larger faster.
18     # 3. If the library source code has changed at all since the last update, then
19     # increment revision (`c:r:a' becomes `c:r+1:a').
20     # 4. If any interfaces have been added, removed, or changed since the last update,
21     # increment current, and set revision to 0.
22     # 5. If any interfaces have been added since the last public release, then increment
23     # age.
24     # 6. If any interfaces have been removed since the last public release, then set age
25     # to 0.
26    
27 schoenebeck 1956 LIBLINUXSAMPLER_LT_CURRENT=3
28 schoenebeck 697 LIBLINUXSAMPLER_LT_REVISION=0
29 schoenebeck 1956 LIBLINUXSAMPLER_LT_AGE=0
30 schoenebeck 697 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31    
32 schoenebeck 947 #------------------------------------------------------------------------------------
33     # the LSCP specification version this LinuSampler release complies with:
34    
35     LSCP_RELEASE_MAJOR=1
36 schoenebeck 2024 LSCP_RELEASE_MINOR=5
37 schoenebeck 947
38     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40    
41 schoenebeck 1741 AC_PROG_CXX
42 persson 1777 AC_LIBTOOL_WIN32_DLL
43 schoenebeck 697 AM_PROG_LIBTOOL
44    
45     AC_SUBST(SHLIB_VERSION_ARG)
46     AC_SUBST(SHARED_VERSION_INFO)
47    
48 schoenebeck 12 AC_C_BIGENDIAN
49 persson 1895 AC_CANONICAL_HOST
50 schoenebeck 9
51 schoenebeck 1639 PKG_PROG_PKG_CONFIG
52 schoenebeck 275
53 schoenebeck 554 ###########################################################################
54     # General Checks
55 schoenebeck 275
56 persson 1931 AM_CONDITIONAL(CROSS_COMPILING, test $cross_compiling = yes)
57    
58 schoenebeck 510 AC_MSG_CHECKING([whether x86 architecture])
59 schoenebeck 9 def_arch_x86=0
60 persson 1895 case $host_cpu in
61 persson 1794 "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
62 schoenebeck 9 echo "yes"
63     def_arch_x86=1;;
64     *)
65     echo "no";;
66     esac
67     AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
68    
69 schoenebeck 510 # determine the right gcc switch for CPU specific optimizations
70 schoenebeck 829 # (only if the user did not provide one)
71 schoenebeck 510 CXX_CPU_SWITCH=
72 schoenebeck 829 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
73 persson 1895 if test "$def_arch_x86" = 1 -a "$host_cpu" != "x86_64"; then
74     CXX_CPU_SWITCH="-march=$host_cpu"
75 schoenebeck 909 elif test "$target_cpu" = "ppc"; then
76 persson 1895 CXX_CPU_SWITCH="-arch=$host_cpu"
77 schoenebeck 829 fi
78 schoenebeck 510 fi
79     AC_SUBST([CXX_CPU_SWITCH])
80    
81 senoner 1502 # check if we're on MS Windows
82     AC_CHECK_HEADERS(
83     mmsystem.h,
84     have_windows=1,
85 persson 1895 have_windows=0,
86     [#include <windef.h>]
87 senoner 1502 )
88     AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
89    
90 schoenebeck 288 AC_MSG_CHECKING([whether UNIX98 compatible])
91     AC_LANG_SAVE
92     AC_LANG_C
93     AC_TRY_RUN([
94     #ifndef _GNU_SOURCE
95     #define _GNU_SOURCE 1
96     #endif
97     #include <features.h>
98     void main(void) {
99     #if _XOPEN_SOURCE >= 500
100     exit(0); /* UNIX98 compatible */
101     #else
102     exit(-1); /* not UNIX98 compatible */
103     #endif
104     }
105     ],
106     have_unix98="yes",
107     have_unix98="no",
108     have_unix98="no"
109     )
110     AC_LANG_RESTORE
111     AC_MSG_RESULT([$have_unix98])
112 senoner 1502 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
113 schoenebeck 288 if test "x$HAVE_UNIX98" = "x"; then
114     echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
115     echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
116     echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
117     echo "have a UNIX98 compatible system."
118     exit -1;
119     fi
120     fi
121    
122 wylder 822 # check for <features.h>
123     AC_CHECK_HEADERS(features.h)
124 wylder 821
125 schoenebeck 1454 # test for POSIX thread library
126     m4_ifdef([m4_include(m4/pthread.m4)],,
127     [sinclude([m4/pthread.m4])])
128     ACX_PTHREAD
129     LIBS="$PTHREAD_LIBS $LIBS"
130     CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
131     CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
132     CC="$PTHREAD_CC"
133 schoenebeck 852
134 schoenebeck 1454 # check for a bug in NPTL-enabled glibc
135     # (see Gentoo bug report #194076)
136     AC_ARG_ENABLE(nptl-bug-check,
137     [ --disable-nptl-bug-check
138     Disable check for a bug in certain NPTL-enabled
139     glibc versions that caused crashs.],
140     [config_check_nptl_bug="$enableval"],
141     [config_check_nptl_bug="yes"]
142     )
143     if test "$config_check_nptl_bug" = "yes"; then
144     m4_ifdef([m4_include(m4/nptl_bug.m4)],,
145     [sinclude([m4/nptl_bug.m4])])
146     ACX_NPTL_GLIBC_BUG([
147     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
148     echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
149     echo "probably crash due to this. Please report us the system you are"
150     echo "using and/or file a bug report to the bug tracking system of"
151     echo "your distribution."
152     echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
153     echo "well, you can try to circumvent this problem for now by setting"
154     echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
155     echo "should cause this test to pass."
156     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
157     AC_MSG_ERROR([possibly NPTL glibc bug detected])
158     ])
159     else
160     echo "NPTL glibc bug check disabled"
161     fi
162    
163 schoenebeck 1742 # FIXME: this is actually a dependency of libgig, not of LS directly, why
164     # isn't it hidden by libgig?
165     AC_CHECK_HEADERS(uuid/uuid.h)
166     AC_SEARCH_LIBS(uuid_generate, uuid)
167 schoenebeck 1454
168    
169 schoenebeck 1742
170 schoenebeck 852 ###########################################################################
171 schoenebeck 288 # Checks for available audio and MIDI systems / drivers
172     # (we throw an error if there's not at least one system for audio output and MIDI input available)
173 schoenebeck 852
174 schoenebeck 288 have_midi_input_driver="false"
175     have_audio_output_driver="false"
176    
177 schoenebeck 852 # ALSA
178     AC_ARG_ENABLE(alsa-driver,
179     [ --disable-alsa-driver
180     Disable support for the Advanced Linux Sound
181     Architecture (ALSA).],
182 schoenebeck 1360 [config_alsa_driver="$enableval"],
183 schoenebeck 852 [config_alsa_driver="yes"]
184 schoenebeck 18 )
185 schoenebeck 852 have_alsa=0
186     if test "$config_alsa_driver" = "yes"; then
187     AC_CHECK_HEADER(alsa/asoundlib.h,
188     AC_CHECK_LIB(asound, main,
189     have_alsa=1
190     ,
191     have_alsa=0
192     )
193     ,
194     have_alsa=0
195     )
196     if test "$have_alsa" = "1"; then
197     have_midi_input_driver="true"
198     have_audio_output_driver="true";
199     fi
200    
201     echo -n "checking Alsa version... "
202     AC_LANG_SAVE
203     AC_LANG_C
204     AC_TRY_RUN([
205     #include <alsa/asoundlib.h>
206     void main(void) {
207     /* ensure backward compatibility */
208     #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
209     #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
210     #endif
211     exit(SND_LIB_MAJOR);
212     }
213     ],
214     alsa_major=0,
215     alsa_major=$?,
216     alsa_major=0
217     )
218     AC_TRY_RUN([
219     #include <alsa/asoundlib.h>
220     void main(void) {
221     /* ensure backward compatibility */
222     #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
223     #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
224     #endif
225     exit(SND_LIB_MINOR);
226     }
227     ],
228     alsa_minor=0,
229     alsa_minor=$?,
230     alsa_minor=0
231     )
232     AC_TRY_RUN([
233     #include <alsa/asoundlib.h>
234     void main(void) {
235     /* ensure backward compatibility */
236     #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
237     #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
238     #endif
239     exit(SND_LIB_SUBMINOR);
240     }
241     ],
242     alsa_subminor=0,
243     alsa_subminor=$?,
244     alsa_subminor=0
245     )
246     AC_LANG_RESTORE
247     echo "$alsa_major.$alsa_minor.$alsa_subminor";
248     AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
249     AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
250     AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
251     else
252     echo "ALSA support disabled by configure script parameter"
253 schoenebeck 18 fi
254 schoenebeck 291 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
255 schoenebeck 288 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
256 schoenebeck 1876 config_have_alsa="no"
257     if test $have_alsa = "1"; then
258     config_have_alsa="yes"
259     fi
260 schoenebeck 18
261 schoenebeck 852 # JACK
262     AC_ARG_ENABLE(jack-driver,
263     [ --disable-jack-driver
264     Disable support for the Jack Audio Connection Kit
265     (JACK).],
266 schoenebeck 1360 [config_jack_driver="$enableval"],
267 schoenebeck 852 [config_jack_driver="yes"]
268 schoenebeck 18 )
269 schoenebeck 852 have_jack=0
270     if test "$config_jack_driver" = "yes"; then
271     PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
272     if test $have_jack = "1"; then
273     AC_SUBST(JACK_LIBS)
274     AC_SUBST(JACK_CFLAGS)
275 persson 1748 linuxsampler_save_LIBS=$LIBS
276     LIBS="$JACK_LIBS $LIBS"
277     AC_CHECK_FUNCS(jack_client_name_size jack_client_open)
278     LIBS=$linuxsampler_save_LIBS
279 schoenebeck 852 have_audio_output_driver="true";
280     fi
281 schoenebeck 33 else
282 schoenebeck 852 echo "JACK support disabled by configure script parameter"
283 schoenebeck 33 fi
284 schoenebeck 852 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
285     AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
286 schoenebeck 1876 config_have_jack="no"
287     if test $have_jack = "1"; then
288     config_have_jack="yes"
289     fi
290 schoenebeck 31
291 persson 1651 # JACK MIDI
292     have_jack_midi=0
293     if test $have_jack = "1"; then
294 persson 1652 linuxsampler_save_CFLAGS=$CFLAGS
295     linuxsampler_save_LIBS=$LIBS
296     CFLAGS="$JACK_CFLAGS $CFLAGS"
297     LIBS="$JACK_LIBS $LIBS"
298     AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
299     if test $have_jack_midi = "1"; then
300     AC_CHECK_FUNCS(jack_midi_get_event_count)
301     AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
302     jack_midi_clear_buffer(0, 0);
303     ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
304     [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
305     have_midi_input_driver="true"
306     fi
307     CFLAGS=$linuxsampler_save_CFLAGS
308     LIBS=$linuxsampler_save_LIBS
309 persson 1651 fi
310     AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
311     AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
312     [Define to 1 if you have JACK with MIDI support installed.])
313 schoenebeck 1876 config_have_jack_midi="no"
314     if test $have_jack_midi = "1"; then
315     config_have_jack_midi="yes"
316     fi
317 persson 1651
318 schoenebeck 838 # ARTS
319 schoenebeck 852 AC_ARG_ENABLE(arts-driver,
320     [ --disable-arts-driver
321     Disable support for the Analogue Realtime System
322     (aRts).],
323 schoenebeck 1360 [config_arts_driver="$enableval"],
324 schoenebeck 852 [config_arts_driver="yes"]
325     )
326     have_arts=0
327     if test "$config_arts_driver" = "yes"; then
328     m4_ifdef([m4_include(m4/arts.m4)],,
329     [sinclude([m4/arts.m4])])
330     AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
331     if test "$have_arts" = "1"; then
332     have_audio_output_driver="true"
333     fi
334     else
335     echo "ARTS support disabled by configure script parameter"
336 schoenebeck 838 fi
337     AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
338     AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
339 schoenebeck 1876 config_have_arts="no"
340     if test $have_arts = "1"; then
341     config_have_arts="yes"
342     fi
343 schoenebeck 838
344 senoner 1502 # ASIO AUDIO (Win32)
345     AC_ARG_ENABLE(asiosdk-dir,
346     [ --enable-asiosdk-dir
347     Directory where the ASIO SDK is located, this automatically
348     enables the compilation of the ASIO audio output driver.],
349     [config_asiosdk_dir="${enableval}"],
350     [config_asiosdk_dir="."]
351     )
352     AC_SUBST(config_asiosdk_dir)
353    
354     AC_ARG_ENABLE(asio-driver,
355     [ --disable-asio-driver
356     Disable support for the Windows ASIO driver.],
357     [config_asio_driver="$enableval"],
358     [config_asio_driver="yes"]
359     )
360     have_asio=0
361     ASIOSDK_BASEDIR=
362     if test "$config_asio_driver" = "yes"; then
363     asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
364     echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
365     if test -e $asiosdk_headerfile ; then
366     echo yes
367     have_asio=1
368     ASIOSDK_BASEDIR="$config_asiosdk_dir"
369     else
370     echo no
371     have_asio=0
372     fi
373     if test "$have_asio" = "1"; then
374     have_audio_output_driver="true"
375     fi
376     else
377     echo "Windows ASIO support disabled by configure script parameter"
378     fi
379     AC_SUBST(ASIOSDK_BASEDIR)
380     AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
381     AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
382 schoenebeck 1876 config_have_asio="no"
383     if test $have_asio = "1"; then
384     config_have_asio="yes"
385     fi
386 senoner 1502
387 schoenebeck 609 # MidiShare (Linux, OS X, Windows)
388 schoenebeck 852 AC_ARG_ENABLE(midishare-driver,
389     [ --disable-midishare-driver
390     Disable support for the MidiShare system.],
391 schoenebeck 1360 [config_midishare_driver="$enableval"],
392 schoenebeck 852 [config_midishare_driver="yes"]
393 schoenebeck 609 )
394 schoenebeck 852 have_midishare=0
395     if test "$config_midishare_driver" = "yes"; then
396     AC_CHECK_HEADER(MidiShare.h,
397     AC_CHECK_LIB(MidiShare, MidiCountEvs,
398     have_midishare=1,
399     have_midishare=0
400     )
401     ,
402     have_midishare=0
403     )
404     if test "$have_midishare" = "1"; then
405     have_midi_input_driver="true"
406     fi
407     else
408     echo "MidiShare support disabled by configure script parameter"
409 schoenebeck 609 fi
410     AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
411     AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
412 schoenebeck 1876 config_have_midishare="no"
413     if test $have_midishare = "1"; then
414     config_have_midishare="yes"
415     fi
416 schoenebeck 609
417     # CoreMIDI (OS X)
418 schoenebeck 852 AC_ARG_ENABLE(coremidi-driver,
419     [ --disable-coremidi-driver
420     Disable support for the Apple CoreMIDI system.],
421 schoenebeck 1360 [config_coremidi_driver="$enableval"],
422 schoenebeck 852 [config_coremidi_driver="yes"]
423 schoenebeck 609 )
424 schoenebeck 852 have_coremidi=0
425     if test "$config_coremidi_driver" = "yes"; then
426     AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
427     have_coremidi=1,
428     have_coremidi=0
429     )
430     if test "$have_coremidi" = "1"; then
431     have_midi_input_driver="true"
432     fi
433     else
434     echo "CoreMIDI support disabled by configure script parameter"
435 schoenebeck 609 fi
436     AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
437     AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
438 schoenebeck 1876 config_have_coremidi="no"
439     if test $have_coremidi = "1"; then
440     config_have_coremidi="yes"
441     fi
442 schoenebeck 609
443 iliev 1829 # CoreAudio (OS X)
444     AC_ARG_ENABLE(coreaudio-driver,
445     [ --disable-coreaudio-driver
446     Disable support for the Apple CoreAudio system.],
447     [config_coreaudio_driver="$enableval"],
448     [config_coreaudio_driver="yes"]
449     )
450     have_coreaudio=0
451     if test "$config_coreaudio_driver" = "yes"; then
452     AC_CHECK_HEADER(CoreAudio/CoreAudio.h,
453     have_coreaudio=1,
454     have_coreaudio=0
455     )
456     if test "$have_coreaudio" = "1"; then
457     have_audio_output_driver="true"
458     fi
459     else
460     echo "CoreAudio support disabled by configure script parameter"
461     fi
462     AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1")
463     AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.])
464 schoenebeck 1876 config_have_coreaudio="no"
465     if test $have_coreaudio = "1"; then
466     config_have_coreaudio="yes"
467     fi
468 iliev 1829
469 senoner 1502 # MME MIDI (Win32)
470     AC_ARG_ENABLE(mmemidi-driver,
471     [ --disable-mmemidi-driver
472     Disable support for the Windows MME MIDI system.],
473     [config_mmemidi_driver="$enableval"],
474     [config_mmemidi_driver="yes"]
475     )
476     have_mmemidi=0
477     if test "$config_mmemidi_driver" = "yes"; then
478     AC_CHECK_HEADERS(mmsystem.h,
479     have_mmemidi=1,
480     have_mmemidi=0
481     )
482     if test "$have_mmemidi" = "1"; then
483     have_midi_input_driver="true"
484     fi
485     else
486     echo "MME MIDI support disabled by configure script parameter"
487     fi
488     AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
489     AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
490 schoenebeck 1876 config_have_mme="no"
491     if test $have_mmemidi = "1"; then
492     config_have_mme="yes"
493     fi
494 senoner 1502
495 persson 1777 # DSSI
496     AC_CHECK_HEADERS(dssi.h,
497 schoenebeck 1876 config_have_dssi="yes",
498     config_have_dssi="no")
499     AM_CONDITIONAL(HAVE_DSSI, test $config_have_dssi = "yes")
500 persson 1777
501     # LV2
502 schoenebeck 1876 PKG_CHECK_MODULES(LV2, lv2core, config_have_lv2="yes", config_have_lv2="no")
503     if test $config_have_lv2 = "no"; then
504     AC_CHECK_HEADER(lv2.h, config_have_lv2="yes", config_have_lv2="no")
505 persson 1777 fi
506 schoenebeck 1876 AM_CONDITIONAL(HAVE_LV2, test $config_have_lv2 = "yes")
507 persson 1777
508     # VST
509     AC_ARG_ENABLE(vstsdk-dir,
510     [ --enable-vstsdk-dir
511     Directory where the VST SDK is located.
512     This automatically enables the compilation
513     of the VST plugin.],
514     [VSTSDK_DIR="${enableval}"],
515     [VSTSDK_DIR=]
516     )
517     AC_SUBST(VSTSDK_DIR)
518     AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
519 schoenebeck 1876 config_have_vst="no"
520     if test "x$VSTSDK_DIR" != "x"; then
521     config_have_vst="yes"
522     fi
523 persson 1777
524 iliev 1846 # AU
525     AC_CHECK_HEADERS(AudioUnit/AudioUnit.h,
526 schoenebeck 1876 config_have_au="yes",
527     config_have_au="no")
528     AM_CONDITIONAL(HAVE_AU, test $config_have_au = "yes")
529 iliev 1855 AM_CONDITIONAL(HAVE_AUFLAGS, test "$AUFLAGS" != "")
530 persson 1777
531 iliev 1846
532 schoenebeck 1364 # have we found at least one MIDI input and one audio output driver ?
533     if test "$have_midi_input_driver" = "false"; then
534     echo "No supported MIDI input system found!"
535     echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
536 persson 1652 echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
537 schoenebeck 1364 echo "If you think you have one of those available on your system, make sure you"
538     echo "also have the respective development (header) files installed."
539     exit -1;
540     fi
541     if test "$have_audio_output_driver" = "false"; then
542     echo "No supported audio output system found!"
543 persson 1652 echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
544 schoenebeck 1364 echo "driver at the moment!"
545     exit -1;
546     fi
547    
548    
549    
550     ###########################################################################
551     # Checks for various DLL libraries
552    
553 schoenebeck 504 # Check presence of libgig
554 schoenebeck 1956 libgig_version="3.3.0"
555 schoenebeck 504 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
556     if test "$HAVE_GIG" = "false"; then
557     echo "Required libgig version not found!"
558     echo "You need to have libgig version ${libgig_version} installed!"
559     exit -1;
560 schoenebeck 714 else
561     echo "yes, found libgig $libgig_version"
562 schoenebeck 504 fi
563     AC_SUBST(GIG_CFLAGS)
564     AC_SUBST(GIG_LIBS)
565    
566 iliev 2018 # SF2 Engine (requires libgig)
567 iliev 2012 AC_ARG_ENABLE(sf2-engine,
568     [ --disable-sf2-engine
569     Disable compilation of the SF2 engine.
570 iliev 2018 You need to have libgig installed.],
571 iliev 2012 [config_sf2_engine="$enableval"],
572     [config_sf2_engine="yes"]
573     )
574     HAVE_SF2=0;
575     if test "$config_sf2_engine" = "yes"; then
576 iliev 2018 HAVE_SF2=1
577 iliev 2012 else
578     echo "SF2 engine disabled by configure script parameter"
579     fi
580     AM_CONDITIONAL(HAVE_SF2, test $HAVE_SF2 = 1)
581     AC_DEFINE_UNQUOTED(HAVE_SF2,$HAVE_SF2,[Define to 1 if you want SF2 engine and have libsf2 installed.])
582     config_have_sf2="no"
583     if test $HAVE_SF2 = "1"; then
584     config_have_sf2="yes"
585     fi
586    
587     # Check presence of libsndfile
588     libsndfile_version="1.0"
589     PKG_CHECK_MODULES(SNDFILE, sndfile >= $libsndfile_version, HAVE_SNDFILE=true, HAVE_SNDFILE=false)
590     if test "$HAVE_SNDFILE" = "false"; then
591     echo "Required libsndfile version not found!"
592     echo "You need to have libsndfile version ${libsndfile_version} installed!"
593     exit -1;
594     else
595     echo "yes, found libsndfile $libsndfile_version"
596     fi
597     AC_SUBST(SNDFILE_CFLAGS)
598     AC_SUBST(SNDFILE_LIBS)
599    
600 persson 2119 # Check for Vorbis support in libsndfile
601     linuxsampler_save_CFLAGS=$CFLAGS
602     CFLAGS="$SNDFILE_CFLAGS $CFLAGS"
603     AC_CHECK_DECLS([SF_FORMAT_VORBIS], [], [] ,[[#include <sndfile.h>]])
604     CFLAGS=$linuxsampler_save_CFLAGS
605    
606 schoenebeck 1364 # Instruments DB feature (requires SQLite 3.3)
607     AC_ARG_ENABLE(instruments-db,
608     [ --disable-instruments-db
609     Disable compilation of the sampler's instruments
610     database feature. You need to have SQLite 3.3
611     or younger installed for this feature.],
612     [config_instruments_db="$enableval"],
613     [config_instruments_db="yes"]
614     )
615     HAVE_SQLITE3=0;
616     if test "$config_instruments_db" = "yes"; then
617     # Check presence of sqlite3
618     sqlite_version="3.3"
619     PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
620     AC_SUBST(SQLITE3_LIBS)
621     AC_SUBST(SQLITE3_CFLAGS)
622     if test $HAVE_SQLITE3 = false; then
623     HAVE_SQLITE3=0
624     config_instruments_db="no"
625     echo "*** Required sqlite version not found!"
626     echo "*** You need to have sqlite version ${sqlite_version} or higher"
627     echo "*** for instruments database support to be enabled."
628     echo "*** Support for instruments DB will be disabled!"
629     else
630     HAVE_SQLITE3=1
631     fi
632 senkov 397 else
633 schoenebeck 1364 echo "Instruments DB feature disabled by configure script parameter"
634 senkov 397 fi
635     AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
636 schoenebeck 1364 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
637 schoenebeck 31
638 schoenebeck 288
639    
640 schoenebeck 554 ###########################################################################
641     # Handle Configuration Options
642    
643     # TODO: should we use AC_ARG_VAR(variable, description) instead?
644    
645 schoenebeck 617 AC_ARG_ENABLE(asm,
646 schoenebeck 1259 [ --disable-asm
647 schoenebeck 738 Enable hand-crafted assembly optimizations
648 schoenebeck 1259 (default=on). LinuxSampler provides CPU specific
649     assembly optimizations. This is currently limited
650     to just enter a fast (denormal) FPU mode on x86
651     platforms. There are currently no synthesis core
652     assembly optimizations anymore since LS 0.4.0],
653 schoenebeck 1360 [config_asm="$enableval"],
654 schoenebeck 1259 [config_asm="yes"]
655 schoenebeck 617 )
656     if test "$config_asm" = "yes"; then
657 schoenebeck 1259 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
658 schoenebeck 617 fi
659    
660 schoenebeck 554 AC_ARG_ENABLE(dev-mode,
661 schoenebeck 1424 [ --enable-dev-mode
662     Enable development mode (default=off). In that mode
663 schoenebeck 554 we do some extra sanity checks here and there.
664     This helps to spot possible problems, but reduces
665     efficiency a bit],
666 schoenebeck 1360 [config_dev_mode="$enableval"],
667 schoenebeck 1424 [config_dev_mode="no"]
668 schoenebeck 554 )
669     if test "$config_dev_mode" = "yes"; then
670     AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
671     fi
672    
673     AC_ARG_ENABLE(debug-level,
674     [ --enable-debug-level
675     Specify verbosity of console messages (default=1).
676     The higher the value, the higher will be verbosity.
677     A value of 0 means no console output at all.
678     There's not really an upper limit but the usual
679     level of all messages is currently somewhere less
680     than 10.],
681     [config_debug_level="${enableval}"],
682     [config_debug_level="1"]
683     )
684     AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
685    
686     AC_ARG_ENABLE(rt-exceptions,
687     [ --enable-rt-exceptions
688     Enable exceptions in the realtime thread
689     (default=no). If this is enabled, exceptions will
690     be thrown on critical errors in the realtime
691     context as well. Otherwise if disabled
692     segmentation faults will be forced by the
693     application on critical errors.],
694 schoenebeck 1360 [config_rt_exceptions="$enableval"],
695 schoenebeck 554 [config_rt_exceptions="no"]
696     )
697     if test "$config_rt_exceptions" = "yes"; then
698     AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
699     fi
700    
701 nagata 1649 AC_ARG_ENABLE(pthread-testcancel,
702     [ --enable-pthread-testcancel
703 schoenebeck 1742 Enable pthread_testcancel() calls and avoid asynchronous
704 nagata 1649 cancel of pthreads (default=no).],
705     [config_pthread_testcancel="$enableval"],
706     [config_pthread_testcancel="no"]
707     )
708     if test "$config_pthread_testcancel" = "yes"; then
709     AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
710     fi
711    
712 schoenebeck 554 AC_ARG_ENABLE(preload-samples,
713     [ --enable-preload-samples
714     Due to seeking and latency issues with hard drives
715     we have to cache a small part of samples' head in
716     RAM (default=32768). The higher this value the
717     more memory will be occupied for each sample, but
718     the safer this will be in regards of possible
719     droputs. A 'good' value depends on the running
720     system and usage dependant factors.],
721     [config_preload_samples="${enableval}"],
722     [config_preload_samples="32768"]
723     )
724     AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
725    
726     AC_ARG_ENABLE(max-pitch,
727     [ --enable-max-pitch
728     Specify the maximum allowed pitch value in octaves
729     (default=4). To lower memory usage you might want
730     set a smaller value.],
731     [config_max_pitch="${enableval}"],
732     [config_max_pitch="4"]
733     )
734     AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
735    
736     AC_ARG_ENABLE(max-events,
737     [ --enable-max-events
738     Specify the maximum allowed amount of events to be
739     processed per fragment (default=1024).],
740     [config_max_events="${enableval}"],
741     [config_max_events="1024"]
742     )
743     AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
744    
745     AC_ARG_ENABLE(eg-bottom,
746     [ --enable-eg-bottom
747     Bottom limit of envelope generators
748     (default=0.001). Certain kinds of curve types like
749     exponential curves converge against 0 but never
750     reach 0. So we have to define a certain low value
751     after which we should consider all smaller values
752     to be 'almost zero'. The smaller this value, the
753     longer will voices survive in EG's release stage
754     and thus waste voices. If this value is too high
755     will cause click sounds though.],
756     [config_eg_bottom="${enableval}"],
757     [config_eg_bottom="0.001"]
758     )
759     AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
760    
761     AC_ARG_ENABLE(eg-min-release-time,
762     [ --enable-eg-min-release-time
763     Specify the lowest allowed release time in seconds
764     (default=0.0025). This value will also be used to
765     ramp down voices on voice stealing. This value
766     should always be less than the period time of the
767     used audio driver, as in case of voice stealing
768     the killed voice needs to be completely ramped
769     down in the same fragment.],
770     [config_eg_min_release_time="${enableval}"],
771     [config_eg_min_release_time="0.0025"]
772     )
773     AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
774    
775     AC_ARG_ENABLE(refill-streams,
776     [ --enable-refill-streams
777     Number of streams that should be refilled in each
778     disk thread cycle (default=4).],
779     [config_refill_streams="${enableval}"],
780     [config_refill_streams="4"]
781     )
782     AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
783    
784     AC_ARG_ENABLE(stream-min-refill,
785     [ --enable-stream-min-refill
786     Minimum refill size for disk streams (default=1024).
787     The disk thread will go to sleep for a while if no
788     stream had to be refilled more than this value in
789     a disk thread cycle.],
790     [config_stream_min_refill="${enableval}"],
791     [config_stream_min_refill="1024"]
792     )
793     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
794    
795     AC_ARG_ENABLE(stream-max-refill,
796     [ --enable-stream-max-refill
797     Maximum refill size for disk streams
798     (default=65536). The disk thread will refill
799     each stream only by a size of this value per
800     disk thread cycle.],
801     [config_stream_max_refill="${enableval}"],
802     [config_stream_max_refill="65536"]
803     )
804     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
805    
806     AC_ARG_ENABLE(stream-size,
807     [ --enable-stream-size
808     Size of each stream's ring buffer in sample points
809     (default=262144).],
810     [config_stream_size="${enableval}"],
811     [config_stream_size="262144"]
812     )
813     AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
814    
815     AC_ARG_ENABLE(max-streams,
816     [ --enable-max-streams
817 schoenebeck 1800 Initial maximum amount of disk streams
818     (default=90). This value can be changed at
819     runtime. It should always be higher than the
820     maximum amount of voices.],
821 schoenebeck 554 [config_max_streams="${enableval}"],
822     [config_max_streams="90"]
823     )
824 schoenebeck 1800 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
825 schoenebeck 554
826     AC_ARG_ENABLE(max-voices,
827     [ --enable-max-voices
828 schoenebeck 1800 Initial maximum amount of voices (default=64).
829     This value can be changed at runtime. It should
830     always be lower than the maximum amount of disk
831     streams.],
832 schoenebeck 554 [config_max_voices="${enableval}"],
833     [config_max_voices="64"]
834     )
835 schoenebeck 1800 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
836 schoenebeck 554
837 schoenebeck 738 AC_ARG_ENABLE(subfragment-size,
838     [ --enable-subfragment-size
839     Every audio fragment will be splitted into
840     subfragments. Where each subfragment renders
841     audio with constant synthesis parameters. This is
842     done for efficiency reasons. This parameter
843     defines the default size of a subfragment in
844     sample points. A large value means less CPU time
845     whereas a low value means better audio quality
846     (default=32).],
847     [config_subfragment_size="${enableval}"],
848     [config_subfragment_size="32"]
849     )
850     AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
851    
852 schoenebeck 1005 AC_ARG_ENABLE(global-attenuation-default,
853     [ --enable-global-attenuation-default
854 schoenebeck 781 To prevent clipping all samples will be lowered
855 schoenebeck 1005 in amplitude by this given default factor (can
856     be overridden at runtime).
857 schoenebeck 781 (default=0.35)],
858 schoenebeck 1005 [config_global_attenuation_default="${enableval}"],
859     [config_global_attenuation_default="0.35"]
860 schoenebeck 781 )
861 schoenebeck 1005 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
862 schoenebeck 781
863 schoenebeck 554 AC_ARG_ENABLE(voice-steal-algo,
864     [ --enable-voice-steal-algo
865     Voice stealing algorithm to be used. Currently
866     available options:
867     none:
868     Disable voice stealing completely.
869 schoenebeck 563 oldestvoiceonkey (default):
870 schoenebeck 554 Try to kill a voice on the same key first,
871     if no success, proceed with the oldest key.
872 schoenebeck 563 oldestkey:
873 schoenebeck 554 Try to kill a voice from the oldest active
874     key.],
875     [ if test ! "(" "${enableval}" = "none" \
876     -o "${enableval}" = "oldestvoiceonkey" \
877     -o "${enableval}" = "oldestkey" ")" ; then
878     AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
879     else
880     config_voice_steal_algo="${enableval}"
881 schoenebeck 579 fi
882 schoenebeck 554 ],
883 schoenebeck 563 [config_voice_steal_algo="oldestvoiceonkey"]
884 schoenebeck 554 )
885     AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
886    
887     AC_ARG_ENABLE(sysex-buffer-size,
888     [ --enable-sysex-buffer-size
889     System Exclusive Message buffer size in kB
890     (default=2048).],
891     [config_sysex_buffer_size="${enableval}"],
892     [config_sysex_buffer_size="2048"]
893     )
894     AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
895    
896     AC_ARG_ENABLE(force-filter,
897     [ --enable-force-filter
898     If enabled will force filter to be used even if
899     no usage was define in instrument patch files.
900     (default=no).],
901 schoenebeck 1360 [config_force_filter="$enableval"],
902 schoenebeck 554 [config_force_filter="no"]
903     )
904     if test "$config_force_filter" = "yes"; then
905     AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
906     fi
907    
908     AC_ARG_ENABLE(filter-cutoff-min,
909     [ --enable-filter-cutoff-min
910     Minimum filter cutoff frequency in Hz
911     (default=100.0).],
912     [config_filter_cutoff_min="${enableval}"],
913     [config_filter_cutoff_min="100.0"]
914     )
915     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
916    
917     AC_ARG_ENABLE(filter-cutoff-max,
918     [ --enable-filter-cutoff-max
919     Maximum filter cutoff frequency in Hz
920     (default=10000.0).],
921     [config_filter_cutoff_max="${enableval}"],
922     [config_filter_cutoff_max="10000.0"]
923     )
924     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
925    
926     AC_ARG_ENABLE(override-cutoff-ctrl,
927     [ --enable-override-cutoff-ctrl
928     Override filter cutoff MIDI controller (default=no).
929     Note: you have to define the MIDI controller number
930     here, it's not a boolean parameter type! If this
931     option is used, controller number given by
932     instrument patch will be ignored and instead this
933     supplied value will be used.],
934     [config_override_cutoff_ctrl="${enableval}"],
935     [config_override_cutoff_ctrl="no"]
936     )
937     if test ! "$config_override_cutoff_ctrl" = "no"; then
938     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
939     fi
940    
941     AC_ARG_ENABLE(override-resonance-ctrl,
942     [ --enable-override-resonance-ctrl
943     Override filter resonance MIDI controller
944     (default=no). Note: you have to define the MIDI
945     controller number here, it's not a boolean
946     parameter type! If this option is used, controller
947     number given by instrument patch will be ignored
948     and instead this supplied value will be used.],
949     [config_override_resonance_ctrl="${enableval}"],
950     [config_override_resonance_ctrl="no"]
951     )
952     if test ! "$config_override_resonance_ctrl" = "no"; then
953     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
954     fi
955    
956     AC_ARG_ENABLE(override-filter-type,
957     [ --enable-override-filter-type
958     Override filter type (default=no). Options:
959     hp: for highpass
960     bp: for bandpass
961     br: for bandreject
962     lp: for lowpass
963     lpt: for lowpass turbo],
964     [ if test "${enableval}" = "hp" ; then
965     config_override_filter_type="::gig::vcf_type_highpass"
966     elif test "${enableval}" = "bp" ; then
967     config_override_filter_type="::gig::vcf_type_bandpass"
968     elif test "${enableval}" = "br" ; then
969     config_override_filter_type="::gig::vcf_type_bandreject"
970     elif test "${enableval}" = "lp" ; then
971     config_override_filter_type="::gig::vcf_type_lowpass"
972     elif test "${enableval}" = "lpt" ; then
973     config_override_filter_type="::gig::vcf_type_lowpassturbo"
974     elif test ! "${enableval}" = "no"; then
975     AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
976 schoenebeck 579 fi
977 schoenebeck 554 ],
978     [config_override_filter_type="no"]
979     )
980     if test ! "$config_override_filter_type" = "no"; then
981     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
982     fi
983    
984 schoenebeck 563 AC_ARG_ENABLE(gs-checksum,
985     [ --enable-gs-checksum
986     Enable Roland General Synth SysEx checksum check
987     (default=no). If this is enabled, all GS SysEx
988     messages which do not provide a correct checksum
989     will be ignored. This is disabled by default as
990     not all devices honor GS checksums.],
991 schoenebeck 1360 [config_assert_gs_sysex_checksum="$enableval"],
992 schoenebeck 563 [config_assert_gs_sysex_checksum="no"]
993     )
994     if test "config_assert_gs_sysex_checksum" = "yes"; then
995     AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
996     fi
997    
998 schoenebeck 829 AC_ARG_ENABLE(portamento-time-min,
999     [ --enable-portamento-time-min
1000     Minimum Portamento time in seconds
1001     (default=0.1).],
1002     [config_portamento_time_min="${enableval}"],
1003     [config_portamento_time_min="0.1"]
1004     )
1005     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
1006    
1007     AC_ARG_ENABLE(portamento-time-max,
1008     [ --enable-portamento-time-max
1009     Maximum Portamento time in seconds
1010     (default=32).],
1011     [config_portamento_time_max="${enableval}"],
1012     [config_portamento_time_max="32"]
1013     )
1014     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
1015    
1016     AC_ARG_ENABLE(portamento-time-default,
1017     [ --enable-portamento-time-default
1018     Default Portamento time in seconds
1019     (default=1).],
1020     [config_portamento_time_default="${enableval}"],
1021     [config_portamento_time_default="1"]
1022     )
1023     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
1024    
1025 schoenebeck 714 AC_ARG_ENABLE(signed-triang-algo,
1026     [ --enable-signed-triang-algo
1027     Signed triangular wave algorithm to be used (e.g. for LFOs).
1028     Currently available options:
1029     intmath:
1030     Uses integer math without any branch will then be
1031     converted to floating point value for each sample point.
1032     This int->float conversion might hurt on some systems.
1033 senkov 720 intmathabs:
1034     Similar to intmath but uses abs() function.
1035     Depending on compiler and platrofm this could
1036     perform better than integer math as it avoids
1037 schoenebeck 1360 an extra integer multiply instruction.
1038 schoenebeck 714 diharmonic:
1039     The triangular wave will be approximated by adding two
1040     sinusoidials. This solution might especially hurt on
1041     systems with weak floating point unit.
1042     benchmark (default):
1043     This is not an algorithm. Use this option if the
1044     appropriate algorithm should be automatically
1045     chosen by the configure script by performing a
1046     benchmark between the algorithms mentioned above.
1047     This will NOT work for cross compilation!],
1048     [ if test ! "(" "${enableval}" = "intmath" \
1049 senkov 720 -o "${enableval}" = "intmathabs" \
1050 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
1051     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
1052     else
1053     config_signed_triang_algo="${enableval}"
1054     fi
1055     ],
1056     [config_signed_triang_algo="benchmark"]
1057     )
1058 schoenebeck 563
1059 schoenebeck 714 AC_ARG_ENABLE(unsigned-triang-algo,
1060     [ --enable-unsigned-triang-algo
1061     Unsigned triangular wave algorithm to be used (e.g. for LFOs).
1062     Currently available options:
1063     intmath:
1064     Uses integer math without any branch will then be
1065     converted to floating point value for each sample point.
1066     This int->float conversion might hurt on some systems.
1067 senkov 720 intmathabs:
1068     Similar to intmath but uses abs() function.
1069     Depending on compiler and platrofm this could
1070     perform better than integer math as it avoids
1071 schoenebeck 1360 an extra integer multiply instruction.
1072 schoenebeck 714 diharmonic:
1073     The triangular wave will be approximated by adding two
1074     sinusoidials. This solution might especially hurt on
1075     systems with weak floating point unit.
1076     benchmark (default):
1077     This is not an algorithm. Use this option if the
1078     appropriate algorithm should be automatically
1079     chosen by the configure script by performing a
1080     benchmark between the algorithms mentioned above.
1081     This will NOT work for cross compilation!],
1082     [ if test ! "(" "${enableval}" = "intmath" \
1083 senkov 720 -o "${enableval}" = "intmathabs" \
1084 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
1085     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
1086     else
1087     config_unsigned_triang_algo="${enableval}"
1088     fi
1089     ],
1090     [config_unsigned_triang_algo="benchmark"]
1091     )
1092    
1093 iliev 716 AC_ARG_ENABLE(process-muted-channels,
1094     [ --enable-process-muted-channels
1095     Enable processing of muted channels (default=no).
1096     In that mode all MIDI events in the muted channels
1097     will be processed. This will provide information
1098     about the active voices in the muted channels and
1099     will not discard notes, triggered in mute mode,
1100     when the channel is unmuted. But also will reduce
1101     the efficiency.],
1102 schoenebeck 1360 [config_process_muted_channels="$enableval"],
1103 iliev 716 [config_process_muted_channels="no"]
1104     )
1105     if test "$config_process_muted_channels" = "yes"; then
1106     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
1107     fi
1108 schoenebeck 714
1109 schoenebeck 849 AC_ARG_ENABLE(process-all-notes-off,
1110     [ --disable-process-all-notes-off
1111     Disable interpretation of All-Notes-Off MIDI
1112     messages (default=on). By default LS will release
1113     all voices whenever it receives an All-Notes-Off
1114     MIDI message. You can disable this behavior, so
1115     that LS simply ignores such messages.],
1116 schoenebeck 1360 [config_process_all_notes_off="$enableval"],
1117 schoenebeck 849 [config_process_all_notes_off="yes"]
1118     )
1119     if test "$config_process_all_notes_off" = "yes"; then
1120     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
1121     fi
1122    
1123 persson 830 AC_ARG_ENABLE(interpolate-volume,
1124     [ --disable-interpolate-volume
1125     Disable interpolation of volume modulation
1126     (default=on). With this enabled, the volume changes
1127     generated by for example the envelope generator
1128     will be smoother, minimizing the risk for audio
1129     clicks. Disable it to reduce CPU usage.],
1130 schoenebeck 1360 [config_interpolate_volume="$enableval"],
1131 persson 830 [config_interpolate_volume="yes"]
1132     )
1133     if test "$config_interpolate_volume" = "yes"; then
1134     AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
1135     fi
1136 iliev 716
1137 schoenebeck 1762 AC_ARG_ENABLE(master-volume-sysex-by-port,
1138     [ --enable-master-volume-sysex-by-port
1139     Whether global volume sysex message should be
1140     applied globally to the whole sampler or only to
1141     the sampler channels connected to the same MIDI
1142     input port on which the sysex message arrived on.
1143     By default global volume sysex messages apply
1144     globally to the whole sampler, since many MIDI
1145     devices behave that way.],
1146     [config_master_volume_sysex_by_port="$enableval"],
1147     [config_master_volume_sysex_by_port="no"]
1148     )
1149     if test "$config_master_volume_sysex_by_port" = "yes"; then
1150     AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
1151     fi
1152    
1153 schoenebeck 1212 AC_ARG_ENABLE(plugin-dir,
1154     [ --enable-plugin-dir
1155     Directory where the sampler shall look for potential plugins,
1156     that is 3rd party shared libraries that should be loaded by
1157     the sampler on startup. By default the sampler will search
1158     for plugins in the subdirectory "plugins" below its own
1159     library directory.
1160     (i.e. /usr/local/lib/linuxsampler/plugins)],
1161     [config_plugin_dir="${enableval}"],
1162     [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1163     )
1164     AC_SUBST(config_plugin_dir)
1165 persson 830
1166 schoenebeck 1364 AC_ARG_ENABLE(default-instruments-db-location,
1167     [ --enable-default-instruments-db-location
1168     Only when instruments DB feature is enabled: file name
1169     which shall be taken as default location of the
1170     instruments DB file. This location can still be
1171     overridden at runtime with a command line switch.
1172     (default: /var/lib/linuxsampler/instruments.db)],
1173     [config_default_instruments_db_file="${enableval}"],
1174     [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1175     )
1176     AC_DEFINE_UNQUOTED(
1177     CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1178     "$config_default_instruments_db_file",
1179     [Only when instruments DB feature is enabled: default location of the DB file.]
1180     )
1181 schoenebeck 1432 AC_SUBST(config_default_instruments_db_file)
1182 schoenebeck 1212
1183 schoenebeck 1364
1184 schoenebeck 554 ###########################################################################
1185 schoenebeck 714 # Automatic Benchmarks (to detect the best algorithms for the system)
1186    
1187     AC_LANG_SAVE
1188    
1189     if test "$config_signed_triang_algo" = "benchmark"; then
1190     echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1191     AC_LANG_CPLUSPLUS
1192     AC_TRY_RUN([
1193     #define SIGNED 1
1194     #define SILENT 1
1195 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1196 schoenebeck 714 ],
1197     triang_signed=0,
1198     triang_signed=$?,
1199     triang_signed=0
1200     )
1201     if test "$triang_signed" = "2"; then
1202     config_signed_triang_algo="intmath"
1203     echo "integer math"
1204     elif test "$triang_signed" = "3"; then
1205     config_signed_triang_algo="diharmonic"
1206     echo "di harmonics"
1207 senkov 720 elif test "$triang_signed" = "5"; then
1208     config_signed_triang_algo="intmathabs"
1209     echo "integer math using abs()"
1210 schoenebeck 714 else
1211     echo "Benchmark of signed triangular wave algorithms failed!"
1212     echo "Maybe you are doing cross compilation? In that case you have to select"
1213     echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1214     echo "Call './configure --help' for further information or read configure.in."
1215     exit -1;
1216     fi
1217 schoenebeck 1165 else
1218     case "$config_signed_triang_algo" in
1219     intmath)
1220     triang_signed=2 ;;
1221     diharmonic)
1222     triang_signed=3 ;;
1223     intmathabs)
1224     triang_signed=5 ;;
1225     esac
1226 schoenebeck 714 fi
1227 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1228 schoenebeck 714
1229     if test "$config_unsigned_triang_algo" = "benchmark"; then
1230     echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1231     AC_LANG_CPLUSPLUS
1232     AC_TRY_RUN([
1233     #define SIGNED 0
1234     #define SILENT 1
1235 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1236 schoenebeck 714 ],
1237     triang_unsigned=0,
1238     triang_unsigned=$?,
1239     triang_unsigned=0
1240     )
1241     if test "$triang_unsigned" = "2"; then
1242     config_unsigned_triang_algo="intmath"
1243     echo "integer math"
1244     elif test "$triang_unsigned" = "3"; then
1245     config_unsigned_triang_algo="diharmonic"
1246     echo "di harmonics"
1247 senkov 720 elif test "$triang_unsigned" = "5"; then
1248 schoenebeck 726 config_unsigned_triang_algo="intmathabs"
1249 senkov 720 echo "integer math using abs()"
1250 schoenebeck 714 else
1251     echo "Benchmark of unsigned triangular wave algorithms failed!"
1252     echo "Maybe you are doing cross compilation? In that case you have to select"
1253     echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1254     echo "Call './configure --help' for further information or read configure.in."
1255     exit -1;
1256     fi
1257 schoenebeck 1165 else
1258     case "$config_unsigned_triang_algo" in
1259     intmath)
1260     triang_unsigned=2 ;;
1261     diharmonic)
1262     triang_unsigned=3 ;;
1263     intmathabs)
1264     triang_unsigned=5 ;;
1265     esac
1266 schoenebeck 714 fi
1267 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1268 schoenebeck 714
1269     AC_LANG_RESTORE
1270    
1271    
1272     ###########################################################################
1273 schoenebeck 554 # Create Build Files
1274    
1275 schoenebeck 9 AM_CONFIG_HEADER(config.h)
1276 schoenebeck 697 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1277 schoenebeck 9
1278     AC_LANG_CPLUSPLUS
1279 persson 497
1280     # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1281     # this, the dlfcn.h check in am_prog_libtool may fail.
1282     AC_CHECK_HEADER(stdlib.h)
1283    
1284 schoenebeck 654 AC_OUTPUT( \
1285     Makefile \
1286     man/Makefile \
1287     man/linuxsampler.1 \
1288     src/Makefile \
1289 iliev 1161 src/db/Makefile \
1290 schoenebeck 654 src/network/Makefile \
1291     src/engines/Makefile \
1292     src/engines/gig/Makefile \
1293 iliev 2012 src/engines/sf2/Makefile \
1294     src/engines/sfz/Makefile \
1295 schoenebeck 654 src/engines/common/Makefile \
1296 schoenebeck 1722 src/effects/Makefile \
1297 schoenebeck 1321 src/common/Makefile \
1298 schoenebeck 654 src/testcases/Makefile \
1299     src/drivers/Makefile \
1300     src/drivers/audio/Makefile \
1301     src/drivers/midi/Makefile \
1302 schoenebeck 1375 src/plugins/Makefile \
1303 persson 1777 src/hostplugins/Makefile \
1304     src/hostplugins/dssi/Makefile \
1305     src/hostplugins/lv2/Makefile \
1306     src/hostplugins/vst/Makefile \
1307 iliev 1846 src/hostplugins/au/Makefile \
1308 schoenebeck 654 linuxsampler.spec \
1309     debian/Makefile \
1310     Artwork/Makefile \
1311     scripts/Makefile \
1312     osx/Makefile \
1313 schoenebeck 1175 osx/linuxsampler.xcodeproj/Makefile \
1314 schoenebeck 654 Documentation/Makefile \
1315     Documentation/Engines/Makefile \
1316     Documentation/Engines/gig/Makefile \
1317 schoenebeck 697 linuxsampler.pc \
1318     Doxyfile \
1319 schoenebeck 654 )
1320 schoenebeck 554
1321 schoenebeck 1212 # resolve all nested variables in '${config_plugin_dir}'
1322     # (merely for providing a human readable summary below)
1323     while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1324     config_plugin_dir=`eval echo ${config_plugin_dir}`
1325     done
1326 schoenebeck 554
1327 schoenebeck 1212
1328 schoenebeck 554 ###########################################################################
1329     # Output All Configuration Options
1330    
1331     echo ""
1332     echo "#####################################################################"
1333     echo "# LinuxSampler Configuration #"
1334     echo "#-------------------------------------------------------------------#"
1335 schoenebeck 1876 echo "# Release Version: ${LINUXSAMPLER_RELEASE_MAJOR}.${LINUXSAMPLER_RELEASE_MINOR}.${LINUXSAMPLER_RELEASE_BUILD}"
1336     echo "# LSCP Version: ${LSCP_RELEASE_MAJOR}.${LSCP_RELEASE_MINOR}"
1337     echo "#-------------------------------------------------------------------"
1338 schoenebeck 617 echo "# Assembly Optimizations: ${config_asm}"
1339 schoenebeck 554 echo "# Development Mode: ${config_dev_mode}"
1340     echo "# Debug Level: ${config_debug_level}"
1341     echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1342     echo "# Preload Samples: ${config_preload_samples}"
1343     echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1344     echo "# Maximum Events: ${config_max_events}"
1345     echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1346     echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1347     echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1348     echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1349     echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1350     echo "# Stream Size: ${config_stream_size}"
1351 schoenebeck 1800 echo "# Default Maximum Disk Streams: ${config_max_streams}"
1352     echo "# Default Maximum Voices: ${config_max_voices}"
1353 schoenebeck 738 echo "# Default Subfragment Size: ${config_subfragment_size}"
1354 schoenebeck 1005 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1355 schoenebeck 563 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1356 schoenebeck 714 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1357     echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1358 schoenebeck 554 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1359 schoenebeck 829 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1360     echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1361     echo "# Default Portamento Time: ${config_portamento_time_default} s"
1362 schoenebeck 554 echo "# Force Filter Usage: ${config_force_filter}"
1363     echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1364     echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1365     echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1366     echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1367     echo "# Override Filter Type: ${config_override_filter_type}"
1368 schoenebeck 563 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1369 iliev 716 echo "# Process Muted Channels: ${config_process_muted_channels}"
1370 schoenebeck 849 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1371 schoenebeck 1762 echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
1372 persson 830 echo "# Interpolate Volume: ${config_interpolate_volume}"
1373 schoenebeck 1364 echo "# Instruments database support: ${config_instruments_db}"
1374     if test "$config_instruments_db" = "yes"; then
1375     echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1376     fi
1377 schoenebeck 1212 echo "# Plugin Path: ${config_plugin_dir}"
1378 schoenebeck 1876 echo "#-------------------------------------------------------------------"
1379     echo "# MIDI Input Drivers:"
1380     echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack_midi}, CoreMIDI: ${config_have_coremidi}, MME: ${config_have_mme}, MidiShare: ${config_have_midishare}"
1381     echo "#-------------------------------------------------------------------"
1382     echo "# Audio Output Drivers:"
1383     echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack}, ARTS: ${config_have_arts}, CoreAudio: ${config_have_coreaudio}, ASIO: ${config_have_asio}"
1384     echo "#-------------------------------------------------------------------"
1385 iliev 2012 echo "# Sampler Engines:"
1386     echo "# GIG: yes, SF2: ${config_have_sf2}, SFZ: yes"
1387     echo "#-------------------------------------------------------------------"
1388 schoenebeck 2124 echo "# Effect plugin systems for internal effects:"
1389     echo "# LADSPA: yes"
1390     echo "#-------------------------------------------------------------------"
1391 schoenebeck 1876 echo "# Building sampler as plugin for following host standards:"
1392     echo "# DSSI: ${config_have_dssi}, LV2: ${config_have_lv2}, VST: ${config_have_vst}, AU: ${config_have_au}"
1393 schoenebeck 554 echo "#-------------------------------------------------------------------#"
1394     echo "# Read './configure --help' or file 'configure.in' for details. #"
1395     echo "#####################################################################"
1396     echo ""
1397     echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1398     echo ""

  ViewVC Help
Powered by ViewVC