/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Annotation of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 2183 - (hide annotations) (download)
Sat Jun 11 17:53:32 2011 UTC (12 years, 9 months ago) by persson
Original Path: linuxsampler/trunk/configure.in
File size: 57255 byte(s)
* Mac OS X fixes: support the new dir for Core Audio SDK, fixed name
  collision of enum in EffectControl, fixed building outside source
  directory, fixed wrong name of destructor in
  AudioOutputDeviceCoreAudio.cpp
* made sure all source files for hostplugins are included when doing
  "make dist"
* removed empty directories left from the cvs to svn migration

1 schoenebeck 9 AC_INIT(configure.in)
2 schoenebeck 697
3     #------------------------------------------------------------------------------------
4     # LinuxSampler's / liblinuxsampler's "official" release version:
5    
6 schoenebeck 1956 LINUXSAMPLER_RELEASE_MAJOR=1
7     LINUXSAMPLER_RELEASE_MINOR=0
8 schoenebeck 2140 LINUXSAMPLER_RELEASE_BUILD=0.cvs10
9 schoenebeck 697
10     #------------------------------------------------------------------------------------
11     # The following is the libtool / shared library version. This doesn't have to
12     # do anything with the release version. It MUST conform to the following rules:
13     #
14     # 1. Start with version information of `0:0:0' for each libtool library.
15     # 2. Update the version information only immediately before a public release of
16     # your software. More frequent updates are unnecessary, and only guarantee
17     # that the current interface number gets larger faster.
18     # 3. If the library source code has changed at all since the last update, then
19     # increment revision (`c:r:a' becomes `c:r+1:a').
20     # 4. If any interfaces have been added, removed, or changed since the last update,
21     # increment current, and set revision to 0.
22     # 5. If any interfaces have been added since the last public release, then increment
23     # age.
24     # 6. If any interfaces have been removed since the last public release, then set age
25     # to 0.
26    
27 schoenebeck 1956 LIBLINUXSAMPLER_LT_CURRENT=3
28 schoenebeck 697 LIBLINUXSAMPLER_LT_REVISION=0
29 schoenebeck 1956 LIBLINUXSAMPLER_LT_AGE=0
30 schoenebeck 697 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31    
32 schoenebeck 947 #------------------------------------------------------------------------------------
33     # the LSCP specification version this LinuSampler release complies with:
34    
35     LSCP_RELEASE_MAJOR=1
36 schoenebeck 2024 LSCP_RELEASE_MINOR=5
37 schoenebeck 947
38     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40    
41 schoenebeck 1741 AC_PROG_CXX
42 persson 1777 AC_LIBTOOL_WIN32_DLL
43 schoenebeck 697 AM_PROG_LIBTOOL
44    
45     AC_SUBST(SHLIB_VERSION_ARG)
46     AC_SUBST(SHARED_VERSION_INFO)
47    
48 schoenebeck 12 AC_C_BIGENDIAN
49 persson 1895 AC_CANONICAL_HOST
50 schoenebeck 9
51 schoenebeck 1639 PKG_PROG_PKG_CONFIG
52 schoenebeck 275
53 schoenebeck 554 ###########################################################################
54     # General Checks
55 schoenebeck 275
56 persson 1931 AM_CONDITIONAL(CROSS_COMPILING, test $cross_compiling = yes)
57    
58 schoenebeck 510 AC_MSG_CHECKING([whether x86 architecture])
59 schoenebeck 9 def_arch_x86=0
60 persson 1895 case $host_cpu in
61 persson 1794 "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
62 schoenebeck 9 echo "yes"
63     def_arch_x86=1;;
64     *)
65     echo "no";;
66     esac
67     AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
68    
69 schoenebeck 510 # determine the right gcc switch for CPU specific optimizations
70 schoenebeck 829 # (only if the user did not provide one)
71 schoenebeck 510 CXX_CPU_SWITCH=
72 schoenebeck 829 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
73 persson 1895 if test "$def_arch_x86" = 1 -a "$host_cpu" != "x86_64"; then
74     CXX_CPU_SWITCH="-march=$host_cpu"
75 schoenebeck 909 elif test "$target_cpu" = "ppc"; then
76 persson 1895 CXX_CPU_SWITCH="-arch=$host_cpu"
77 schoenebeck 829 fi
78 schoenebeck 510 fi
79     AC_SUBST([CXX_CPU_SWITCH])
80    
81 senoner 1502 # check if we're on MS Windows
82     AC_CHECK_HEADERS(
83     mmsystem.h,
84     have_windows=1,
85 persson 1895 have_windows=0,
86     [#include <windef.h>]
87 senoner 1502 )
88     AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
89    
90 schoenebeck 288 AC_MSG_CHECKING([whether UNIX98 compatible])
91     AC_LANG_SAVE
92     AC_LANG_C
93     AC_TRY_RUN([
94     #ifndef _GNU_SOURCE
95     #define _GNU_SOURCE 1
96     #endif
97     #include <features.h>
98     void main(void) {
99     #if _XOPEN_SOURCE >= 500
100     exit(0); /* UNIX98 compatible */
101     #else
102     exit(-1); /* not UNIX98 compatible */
103     #endif
104     }
105     ],
106     have_unix98="yes",
107     have_unix98="no",
108     have_unix98="no"
109     )
110     AC_LANG_RESTORE
111     AC_MSG_RESULT([$have_unix98])
112 senoner 1502 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
113 schoenebeck 288 if test "x$HAVE_UNIX98" = "x"; then
114     echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
115     echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
116     echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
117     echo "have a UNIX98 compatible system."
118     exit -1;
119     fi
120     fi
121    
122 wylder 822 # check for <features.h>
123     AC_CHECK_HEADERS(features.h)
124 wylder 821
125 schoenebeck 1454 # test for POSIX thread library
126     m4_ifdef([m4_include(m4/pthread.m4)],,
127     [sinclude([m4/pthread.m4])])
128     ACX_PTHREAD
129     LIBS="$PTHREAD_LIBS $LIBS"
130     CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
131     CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
132     CC="$PTHREAD_CC"
133 schoenebeck 852
134 schoenebeck 1454 # check for a bug in NPTL-enabled glibc
135     # (see Gentoo bug report #194076)
136     AC_ARG_ENABLE(nptl-bug-check,
137     [ --disable-nptl-bug-check
138     Disable check for a bug in certain NPTL-enabled
139     glibc versions that caused crashs.],
140     [config_check_nptl_bug="$enableval"],
141     [config_check_nptl_bug="yes"]
142     )
143     if test "$config_check_nptl_bug" = "yes"; then
144     m4_ifdef([m4_include(m4/nptl_bug.m4)],,
145     [sinclude([m4/nptl_bug.m4])])
146     ACX_NPTL_GLIBC_BUG([
147     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
148     echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
149     echo "probably crash due to this. Please report us the system you are"
150     echo "using and/or file a bug report to the bug tracking system of"
151     echo "your distribution."
152     echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
153     echo "well, you can try to circumvent this problem for now by setting"
154     echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
155     echo "should cause this test to pass."
156     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
157     AC_MSG_ERROR([possibly NPTL glibc bug detected])
158     ])
159     else
160     echo "NPTL glibc bug check disabled"
161     fi
162    
163 schoenebeck 1742 # FIXME: this is actually a dependency of libgig, not of LS directly, why
164     # isn't it hidden by libgig?
165     AC_CHECK_HEADERS(uuid/uuid.h)
166     AC_SEARCH_LIBS(uuid_generate, uuid)
167 schoenebeck 1454
168    
169 schoenebeck 1742
170 schoenebeck 852 ###########################################################################
171 schoenebeck 288 # Checks for available audio and MIDI systems / drivers
172     # (we throw an error if there's not at least one system for audio output and MIDI input available)
173 schoenebeck 852
174 schoenebeck 288 have_midi_input_driver="false"
175     have_audio_output_driver="false"
176    
177 schoenebeck 852 # ALSA
178     AC_ARG_ENABLE(alsa-driver,
179     [ --disable-alsa-driver
180     Disable support for the Advanced Linux Sound
181     Architecture (ALSA).],
182 schoenebeck 1360 [config_alsa_driver="$enableval"],
183 schoenebeck 852 [config_alsa_driver="yes"]
184 schoenebeck 18 )
185 schoenebeck 852 have_alsa=0
186     if test "$config_alsa_driver" = "yes"; then
187     AC_CHECK_HEADER(alsa/asoundlib.h,
188     AC_CHECK_LIB(asound, main,
189     have_alsa=1
190     ,
191     have_alsa=0
192     )
193     ,
194     have_alsa=0
195     )
196     if test "$have_alsa" = "1"; then
197     have_midi_input_driver="true"
198     have_audio_output_driver="true";
199     fi
200    
201     echo -n "checking Alsa version... "
202     AC_LANG_SAVE
203     AC_LANG_C
204     AC_TRY_RUN([
205     #include <alsa/asoundlib.h>
206     void main(void) {
207     /* ensure backward compatibility */
208     #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
209     #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
210     #endif
211     exit(SND_LIB_MAJOR);
212     }
213     ],
214     alsa_major=0,
215     alsa_major=$?,
216     alsa_major=0
217     )
218     AC_TRY_RUN([
219     #include <alsa/asoundlib.h>
220     void main(void) {
221     /* ensure backward compatibility */
222     #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
223     #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
224     #endif
225     exit(SND_LIB_MINOR);
226     }
227     ],
228     alsa_minor=0,
229     alsa_minor=$?,
230     alsa_minor=0
231     )
232     AC_TRY_RUN([
233     #include <alsa/asoundlib.h>
234     void main(void) {
235     /* ensure backward compatibility */
236     #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
237     #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
238     #endif
239     exit(SND_LIB_SUBMINOR);
240     }
241     ],
242     alsa_subminor=0,
243     alsa_subminor=$?,
244     alsa_subminor=0
245     )
246     AC_LANG_RESTORE
247     echo "$alsa_major.$alsa_minor.$alsa_subminor";
248     AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
249     AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
250     AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
251     else
252     echo "ALSA support disabled by configure script parameter"
253 schoenebeck 18 fi
254 schoenebeck 291 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
255 schoenebeck 288 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
256 schoenebeck 1876 config_have_alsa="no"
257     if test $have_alsa = "1"; then
258     config_have_alsa="yes"
259     fi
260 schoenebeck 18
261 schoenebeck 852 # JACK
262     AC_ARG_ENABLE(jack-driver,
263     [ --disable-jack-driver
264     Disable support for the Jack Audio Connection Kit
265     (JACK).],
266 schoenebeck 1360 [config_jack_driver="$enableval"],
267 schoenebeck 852 [config_jack_driver="yes"]
268 schoenebeck 18 )
269 schoenebeck 852 have_jack=0
270     if test "$config_jack_driver" = "yes"; then
271     PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
272     if test $have_jack = "1"; then
273     AC_SUBST(JACK_LIBS)
274     AC_SUBST(JACK_CFLAGS)
275 persson 1748 linuxsampler_save_LIBS=$LIBS
276     LIBS="$JACK_LIBS $LIBS"
277     AC_CHECK_FUNCS(jack_client_name_size jack_client_open)
278     LIBS=$linuxsampler_save_LIBS
279 schoenebeck 852 have_audio_output_driver="true";
280     fi
281 schoenebeck 33 else
282 schoenebeck 852 echo "JACK support disabled by configure script parameter"
283 schoenebeck 33 fi
284 schoenebeck 852 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
285     AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
286 schoenebeck 1876 config_have_jack="no"
287     if test $have_jack = "1"; then
288     config_have_jack="yes"
289     fi
290 schoenebeck 31
291 persson 1651 # JACK MIDI
292     have_jack_midi=0
293     if test $have_jack = "1"; then
294 persson 1652 linuxsampler_save_CFLAGS=$CFLAGS
295     linuxsampler_save_LIBS=$LIBS
296     CFLAGS="$JACK_CFLAGS $CFLAGS"
297     LIBS="$JACK_LIBS $LIBS"
298     AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
299     if test $have_jack_midi = "1"; then
300     AC_CHECK_FUNCS(jack_midi_get_event_count)
301     AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
302     jack_midi_clear_buffer(0, 0);
303     ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
304     [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
305     have_midi_input_driver="true"
306     fi
307     CFLAGS=$linuxsampler_save_CFLAGS
308     LIBS=$linuxsampler_save_LIBS
309 persson 1651 fi
310     AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
311     AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
312     [Define to 1 if you have JACK with MIDI support installed.])
313 schoenebeck 1876 config_have_jack_midi="no"
314     if test $have_jack_midi = "1"; then
315     config_have_jack_midi="yes"
316     fi
317 persson 1651
318 schoenebeck 838 # ARTS
319 schoenebeck 852 AC_ARG_ENABLE(arts-driver,
320     [ --disable-arts-driver
321     Disable support for the Analogue Realtime System
322     (aRts).],
323 schoenebeck 1360 [config_arts_driver="$enableval"],
324 schoenebeck 852 [config_arts_driver="yes"]
325     )
326     have_arts=0
327     if test "$config_arts_driver" = "yes"; then
328     m4_ifdef([m4_include(m4/arts.m4)],,
329     [sinclude([m4/arts.m4])])
330     AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
331     if test "$have_arts" = "1"; then
332     have_audio_output_driver="true"
333     fi
334     else
335     echo "ARTS support disabled by configure script parameter"
336 schoenebeck 838 fi
337     AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
338     AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
339 schoenebeck 1876 config_have_arts="no"
340     if test $have_arts = "1"; then
341     config_have_arts="yes"
342     fi
343 schoenebeck 838
344 senoner 1502 # ASIO AUDIO (Win32)
345     AC_ARG_ENABLE(asiosdk-dir,
346     [ --enable-asiosdk-dir
347     Directory where the ASIO SDK is located, this automatically
348     enables the compilation of the ASIO audio output driver.],
349     [config_asiosdk_dir="${enableval}"],
350     [config_asiosdk_dir="."]
351     )
352     AC_SUBST(config_asiosdk_dir)
353    
354     AC_ARG_ENABLE(asio-driver,
355     [ --disable-asio-driver
356     Disable support for the Windows ASIO driver.],
357     [config_asio_driver="$enableval"],
358     [config_asio_driver="yes"]
359     )
360     have_asio=0
361     ASIOSDK_BASEDIR=
362     if test "$config_asio_driver" = "yes"; then
363     asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
364     echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
365     if test -e $asiosdk_headerfile ; then
366     echo yes
367     have_asio=1
368     ASIOSDK_BASEDIR="$config_asiosdk_dir"
369     else
370     echo no
371     have_asio=0
372     fi
373     if test "$have_asio" = "1"; then
374     have_audio_output_driver="true"
375     fi
376     else
377     echo "Windows ASIO support disabled by configure script parameter"
378     fi
379     AC_SUBST(ASIOSDK_BASEDIR)
380     AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
381     AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
382 schoenebeck 1876 config_have_asio="no"
383     if test $have_asio = "1"; then
384     config_have_asio="yes"
385     fi
386 senoner 1502
387 schoenebeck 609 # MidiShare (Linux, OS X, Windows)
388 schoenebeck 852 AC_ARG_ENABLE(midishare-driver,
389     [ --disable-midishare-driver
390     Disable support for the MidiShare system.],
391 schoenebeck 1360 [config_midishare_driver="$enableval"],
392 schoenebeck 852 [config_midishare_driver="yes"]
393 schoenebeck 609 )
394 schoenebeck 852 have_midishare=0
395     if test "$config_midishare_driver" = "yes"; then
396     AC_CHECK_HEADER(MidiShare.h,
397     AC_CHECK_LIB(MidiShare, MidiCountEvs,
398     have_midishare=1,
399     have_midishare=0
400     )
401     ,
402     have_midishare=0
403     )
404     if test "$have_midishare" = "1"; then
405     have_midi_input_driver="true"
406     fi
407     else
408     echo "MidiShare support disabled by configure script parameter"
409 schoenebeck 609 fi
410     AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
411     AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
412 schoenebeck 1876 config_have_midishare="no"
413     if test $have_midishare = "1"; then
414     config_have_midishare="yes"
415     fi
416 schoenebeck 609
417     # CoreMIDI (OS X)
418 schoenebeck 852 AC_ARG_ENABLE(coremidi-driver,
419     [ --disable-coremidi-driver
420     Disable support for the Apple CoreMIDI system.],
421 schoenebeck 1360 [config_coremidi_driver="$enableval"],
422 schoenebeck 852 [config_coremidi_driver="yes"]
423 schoenebeck 609 )
424 schoenebeck 852 have_coremidi=0
425     if test "$config_coremidi_driver" = "yes"; then
426     AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
427     have_coremidi=1,
428     have_coremidi=0
429     )
430     if test "$have_coremidi" = "1"; then
431     have_midi_input_driver="true"
432     fi
433     else
434     echo "CoreMIDI support disabled by configure script parameter"
435 schoenebeck 609 fi
436     AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
437     AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
438 schoenebeck 1876 config_have_coremidi="no"
439     if test $have_coremidi = "1"; then
440     config_have_coremidi="yes"
441     fi
442 schoenebeck 609
443 iliev 1829 # CoreAudio (OS X)
444     AC_ARG_ENABLE(coreaudio-driver,
445     [ --disable-coreaudio-driver
446     Disable support for the Apple CoreAudio system.],
447     [config_coreaudio_driver="$enableval"],
448     [config_coreaudio_driver="yes"]
449     )
450     have_coreaudio=0
451     if test "$config_coreaudio_driver" = "yes"; then
452     AC_CHECK_HEADER(CoreAudio/CoreAudio.h,
453     have_coreaudio=1,
454     have_coreaudio=0
455     )
456     if test "$have_coreaudio" = "1"; then
457     have_audio_output_driver="true"
458     fi
459     else
460     echo "CoreAudio support disabled by configure script parameter"
461     fi
462     AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1")
463     AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.])
464 schoenebeck 1876 config_have_coreaudio="no"
465     if test $have_coreaudio = "1"; then
466     config_have_coreaudio="yes"
467     fi
468 iliev 1829
469 senoner 1502 # MME MIDI (Win32)
470     AC_ARG_ENABLE(mmemidi-driver,
471     [ --disable-mmemidi-driver
472     Disable support for the Windows MME MIDI system.],
473     [config_mmemidi_driver="$enableval"],
474     [config_mmemidi_driver="yes"]
475     )
476     have_mmemidi=0
477     if test "$config_mmemidi_driver" = "yes"; then
478     AC_CHECK_HEADERS(mmsystem.h,
479     have_mmemidi=1,
480     have_mmemidi=0
481     )
482     if test "$have_mmemidi" = "1"; then
483     have_midi_input_driver="true"
484     fi
485     else
486     echo "MME MIDI support disabled by configure script parameter"
487     fi
488     AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
489     AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
490 schoenebeck 1876 config_have_mme="no"
491     if test $have_mmemidi = "1"; then
492     config_have_mme="yes"
493     fi
494 senoner 1502
495 persson 1777 # DSSI
496     AC_CHECK_HEADERS(dssi.h,
497 schoenebeck 1876 config_have_dssi="yes",
498     config_have_dssi="no")
499     AM_CONDITIONAL(HAVE_DSSI, test $config_have_dssi = "yes")
500 persson 1777
501     # LV2
502 schoenebeck 1876 PKG_CHECK_MODULES(LV2, lv2core, config_have_lv2="yes", config_have_lv2="no")
503     if test $config_have_lv2 = "no"; then
504     AC_CHECK_HEADER(lv2.h, config_have_lv2="yes", config_have_lv2="no")
505 persson 1777 fi
506 schoenebeck 1876 AM_CONDITIONAL(HAVE_LV2, test $config_have_lv2 = "yes")
507 persson 1777
508     # VST
509     AC_ARG_ENABLE(vstsdk-dir,
510     [ --enable-vstsdk-dir
511     Directory where the VST SDK is located.
512     This automatically enables the compilation
513     of the VST plugin.],
514     [VSTSDK_DIR="${enableval}"],
515     [VSTSDK_DIR=]
516     )
517     AC_SUBST(VSTSDK_DIR)
518     AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
519 schoenebeck 1876 config_have_vst="no"
520     if test "x$VSTSDK_DIR" != "x"; then
521     config_have_vst="yes"
522     fi
523 persson 1777
524 iliev 1846 # AU
525     AC_CHECK_HEADERS(AudioUnit/AudioUnit.h,
526 schoenebeck 1876 config_have_au="yes",
527     config_have_au="no")
528     AM_CONDITIONAL(HAVE_AU, test $config_have_au = "yes")
529 iliev 1855 AM_CONDITIONAL(HAVE_AUFLAGS, test "$AUFLAGS" != "")
530 persson 1777
531 persson 2183 if test $config_have_au = "yes" ; then
532     if test "x$DEVELOPER_EXTRAS_DIR" = "x" ; then
533     if test -d /Developer/Extras ; then
534     DEVELOPER_EXTRAS_DIR=/Developer/Extras
535     else
536     DEVELOPER_EXTRAS_DIR=/Developer/Examples
537     fi
538     fi
539     AC_SUBST(DEVELOPER_EXTRAS_DIR)
540     fi
541 iliev 1846
542 schoenebeck 1364 # have we found at least one MIDI input and one audio output driver ?
543     if test "$have_midi_input_driver" = "false"; then
544     echo "No supported MIDI input system found!"
545     echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
546 persson 1652 echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
547 schoenebeck 1364 echo "If you think you have one of those available on your system, make sure you"
548     echo "also have the respective development (header) files installed."
549     exit -1;
550     fi
551     if test "$have_audio_output_driver" = "false"; then
552     echo "No supported audio output system found!"
553 persson 1652 echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
554 schoenebeck 1364 echo "driver at the moment!"
555     exit -1;
556     fi
557    
558    
559    
560     ###########################################################################
561     # Checks for various DLL libraries
562    
563 schoenebeck 504 # Check presence of libgig
564 schoenebeck 1956 libgig_version="3.3.0"
565 schoenebeck 504 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
566     if test "$HAVE_GIG" = "false"; then
567     echo "Required libgig version not found!"
568     echo "You need to have libgig version ${libgig_version} installed!"
569     exit -1;
570 schoenebeck 714 else
571     echo "yes, found libgig $libgig_version"
572 schoenebeck 504 fi
573     AC_SUBST(GIG_CFLAGS)
574     AC_SUBST(GIG_LIBS)
575    
576 iliev 2018 # SF2 Engine (requires libgig)
577 iliev 2012 AC_ARG_ENABLE(sf2-engine,
578     [ --disable-sf2-engine
579     Disable compilation of the SF2 engine.
580 iliev 2018 You need to have libgig installed.],
581 iliev 2012 [config_sf2_engine="$enableval"],
582     [config_sf2_engine="yes"]
583     )
584     HAVE_SF2=0;
585     if test "$config_sf2_engine" = "yes"; then
586 iliev 2018 HAVE_SF2=1
587 iliev 2012 else
588     echo "SF2 engine disabled by configure script parameter"
589     fi
590     AM_CONDITIONAL(HAVE_SF2, test $HAVE_SF2 = 1)
591     AC_DEFINE_UNQUOTED(HAVE_SF2,$HAVE_SF2,[Define to 1 if you want SF2 engine and have libsf2 installed.])
592     config_have_sf2="no"
593     if test $HAVE_SF2 = "1"; then
594     config_have_sf2="yes"
595     fi
596    
597     # Check presence of libsndfile
598     libsndfile_version="1.0"
599     PKG_CHECK_MODULES(SNDFILE, sndfile >= $libsndfile_version, HAVE_SNDFILE=true, HAVE_SNDFILE=false)
600     if test "$HAVE_SNDFILE" = "false"; then
601     echo "Required libsndfile version not found!"
602     echo "You need to have libsndfile version ${libsndfile_version} installed!"
603     exit -1;
604     else
605     echo "yes, found libsndfile $libsndfile_version"
606     fi
607     AC_SUBST(SNDFILE_CFLAGS)
608     AC_SUBST(SNDFILE_LIBS)
609    
610 persson 2119 # Check for Vorbis support in libsndfile
611     linuxsampler_save_CFLAGS=$CFLAGS
612     CFLAGS="$SNDFILE_CFLAGS $CFLAGS"
613     AC_CHECK_DECLS([SF_FORMAT_VORBIS], [], [] ,[[#include <sndfile.h>]])
614 persson 2167
615     # Check for loop functionality in libsndfile
616     AC_CHECK_MEMBERS([SF_INSTRUMENT.loops],,
617     [AC_MSG_WARN([Your version of libsndfile does not support
618     reading of loop information. LinuxSampler will not be able to
619     extract loop information from sample files.])],
620     [#include <sndfile.h>])
621 persson 2119 CFLAGS=$linuxsampler_save_CFLAGS
622    
623 schoenebeck 1364 # Instruments DB feature (requires SQLite 3.3)
624     AC_ARG_ENABLE(instruments-db,
625     [ --disable-instruments-db
626     Disable compilation of the sampler's instruments
627     database feature. You need to have SQLite 3.3
628     or younger installed for this feature.],
629     [config_instruments_db="$enableval"],
630     [config_instruments_db="yes"]
631     )
632     HAVE_SQLITE3=0;
633     if test "$config_instruments_db" = "yes"; then
634     # Check presence of sqlite3
635     sqlite_version="3.3"
636     PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
637     AC_SUBST(SQLITE3_LIBS)
638     AC_SUBST(SQLITE3_CFLAGS)
639     if test $HAVE_SQLITE3 = false; then
640     HAVE_SQLITE3=0
641     config_instruments_db="no"
642     echo "*** Required sqlite version not found!"
643     echo "*** You need to have sqlite version ${sqlite_version} or higher"
644     echo "*** for instruments database support to be enabled."
645     echo "*** Support for instruments DB will be disabled!"
646     else
647     HAVE_SQLITE3=1
648     fi
649 senkov 397 else
650 schoenebeck 1364 echo "Instruments DB feature disabled by configure script parameter"
651 senkov 397 fi
652     AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
653 schoenebeck 1364 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
654 schoenebeck 31
655 schoenebeck 288
656    
657 schoenebeck 554 ###########################################################################
658     # Handle Configuration Options
659    
660     # TODO: should we use AC_ARG_VAR(variable, description) instead?
661    
662 schoenebeck 617 AC_ARG_ENABLE(asm,
663 schoenebeck 1259 [ --disable-asm
664 schoenebeck 738 Enable hand-crafted assembly optimizations
665 schoenebeck 1259 (default=on). LinuxSampler provides CPU specific
666     assembly optimizations. This is currently limited
667     to just enter a fast (denormal) FPU mode on x86
668     platforms. There are currently no synthesis core
669     assembly optimizations anymore since LS 0.4.0],
670 schoenebeck 1360 [config_asm="$enableval"],
671 schoenebeck 1259 [config_asm="yes"]
672 schoenebeck 617 )
673     if test "$config_asm" = "yes"; then
674 schoenebeck 1259 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
675 schoenebeck 617 fi
676    
677 schoenebeck 554 AC_ARG_ENABLE(dev-mode,
678 schoenebeck 1424 [ --enable-dev-mode
679     Enable development mode (default=off). In that mode
680 schoenebeck 554 we do some extra sanity checks here and there.
681     This helps to spot possible problems, but reduces
682     efficiency a bit],
683 schoenebeck 1360 [config_dev_mode="$enableval"],
684 schoenebeck 1424 [config_dev_mode="no"]
685 schoenebeck 554 )
686     if test "$config_dev_mode" = "yes"; then
687     AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
688     fi
689    
690     AC_ARG_ENABLE(debug-level,
691     [ --enable-debug-level
692     Specify verbosity of console messages (default=1).
693     The higher the value, the higher will be verbosity.
694     A value of 0 means no console output at all.
695     There's not really an upper limit but the usual
696     level of all messages is currently somewhere less
697     than 10.],
698     [config_debug_level="${enableval}"],
699     [config_debug_level="1"]
700     )
701     AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
702    
703     AC_ARG_ENABLE(rt-exceptions,
704     [ --enable-rt-exceptions
705     Enable exceptions in the realtime thread
706     (default=no). If this is enabled, exceptions will
707     be thrown on critical errors in the realtime
708     context as well. Otherwise if disabled
709     segmentation faults will be forced by the
710     application on critical errors.],
711 schoenebeck 1360 [config_rt_exceptions="$enableval"],
712 schoenebeck 554 [config_rt_exceptions="no"]
713     )
714     if test "$config_rt_exceptions" = "yes"; then
715     AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
716     fi
717    
718 nagata 1649 AC_ARG_ENABLE(pthread-testcancel,
719     [ --enable-pthread-testcancel
720 schoenebeck 1742 Enable pthread_testcancel() calls and avoid asynchronous
721 nagata 1649 cancel of pthreads (default=no).],
722     [config_pthread_testcancel="$enableval"],
723     [config_pthread_testcancel="no"]
724     )
725     if test "$config_pthread_testcancel" = "yes"; then
726     AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
727     fi
728    
729 schoenebeck 554 AC_ARG_ENABLE(preload-samples,
730     [ --enable-preload-samples
731     Due to seeking and latency issues with hard drives
732     we have to cache a small part of samples' head in
733     RAM (default=32768). The higher this value the
734     more memory will be occupied for each sample, but
735     the safer this will be in regards of possible
736     droputs. A 'good' value depends on the running
737     system and usage dependant factors.],
738     [config_preload_samples="${enableval}"],
739     [config_preload_samples="32768"]
740     )
741     AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
742    
743     AC_ARG_ENABLE(max-pitch,
744     [ --enable-max-pitch
745     Specify the maximum allowed pitch value in octaves
746     (default=4). To lower memory usage you might want
747     set a smaller value.],
748     [config_max_pitch="${enableval}"],
749     [config_max_pitch="4"]
750     )
751     AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
752    
753     AC_ARG_ENABLE(max-events,
754     [ --enable-max-events
755     Specify the maximum allowed amount of events to be
756     processed per fragment (default=1024).],
757     [config_max_events="${enableval}"],
758     [config_max_events="1024"]
759     )
760     AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
761    
762     AC_ARG_ENABLE(eg-bottom,
763     [ --enable-eg-bottom
764     Bottom limit of envelope generators
765     (default=0.001). Certain kinds of curve types like
766     exponential curves converge against 0 but never
767     reach 0. So we have to define a certain low value
768     after which we should consider all smaller values
769     to be 'almost zero'. The smaller this value, the
770     longer will voices survive in EG's release stage
771     and thus waste voices. If this value is too high
772     will cause click sounds though.],
773     [config_eg_bottom="${enableval}"],
774     [config_eg_bottom="0.001"]
775     )
776     AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
777    
778     AC_ARG_ENABLE(eg-min-release-time,
779     [ --enable-eg-min-release-time
780     Specify the lowest allowed release time in seconds
781     (default=0.0025). This value will also be used to
782     ramp down voices on voice stealing. This value
783     should always be less than the period time of the
784     used audio driver, as in case of voice stealing
785     the killed voice needs to be completely ramped
786     down in the same fragment.],
787     [config_eg_min_release_time="${enableval}"],
788     [config_eg_min_release_time="0.0025"]
789     )
790     AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
791    
792     AC_ARG_ENABLE(refill-streams,
793     [ --enable-refill-streams
794     Number of streams that should be refilled in each
795     disk thread cycle (default=4).],
796     [config_refill_streams="${enableval}"],
797     [config_refill_streams="4"]
798     )
799     AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
800    
801     AC_ARG_ENABLE(stream-min-refill,
802     [ --enable-stream-min-refill
803     Minimum refill size for disk streams (default=1024).
804     The disk thread will go to sleep for a while if no
805     stream had to be refilled more than this value in
806     a disk thread cycle.],
807     [config_stream_min_refill="${enableval}"],
808     [config_stream_min_refill="1024"]
809     )
810     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
811    
812     AC_ARG_ENABLE(stream-max-refill,
813     [ --enable-stream-max-refill
814     Maximum refill size for disk streams
815     (default=65536). The disk thread will refill
816     each stream only by a size of this value per
817     disk thread cycle.],
818     [config_stream_max_refill="${enableval}"],
819     [config_stream_max_refill="65536"]
820     )
821     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
822    
823     AC_ARG_ENABLE(stream-size,
824     [ --enable-stream-size
825     Size of each stream's ring buffer in sample points
826     (default=262144).],
827     [config_stream_size="${enableval}"],
828     [config_stream_size="262144"]
829     )
830     AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
831    
832     AC_ARG_ENABLE(max-streams,
833     [ --enable-max-streams
834 schoenebeck 1800 Initial maximum amount of disk streams
835     (default=90). This value can be changed at
836     runtime. It should always be higher than the
837     maximum amount of voices.],
838 schoenebeck 554 [config_max_streams="${enableval}"],
839     [config_max_streams="90"]
840     )
841 schoenebeck 1800 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
842 schoenebeck 554
843     AC_ARG_ENABLE(max-voices,
844     [ --enable-max-voices
845 schoenebeck 1800 Initial maximum amount of voices (default=64).
846     This value can be changed at runtime. It should
847     always be lower than the maximum amount of disk
848     streams.],
849 schoenebeck 554 [config_max_voices="${enableval}"],
850     [config_max_voices="64"]
851     )
852 schoenebeck 1800 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
853 schoenebeck 554
854 schoenebeck 738 AC_ARG_ENABLE(subfragment-size,
855     [ --enable-subfragment-size
856     Every audio fragment will be splitted into
857     subfragments. Where each subfragment renders
858     audio with constant synthesis parameters. This is
859     done for efficiency reasons. This parameter
860     defines the default size of a subfragment in
861     sample points. A large value means less CPU time
862     whereas a low value means better audio quality
863     (default=32).],
864     [config_subfragment_size="${enableval}"],
865     [config_subfragment_size="32"]
866     )
867     AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
868    
869 schoenebeck 1005 AC_ARG_ENABLE(global-attenuation-default,
870     [ --enable-global-attenuation-default
871 schoenebeck 781 To prevent clipping all samples will be lowered
872 schoenebeck 1005 in amplitude by this given default factor (can
873     be overridden at runtime).
874 schoenebeck 781 (default=0.35)],
875 schoenebeck 1005 [config_global_attenuation_default="${enableval}"],
876     [config_global_attenuation_default="0.35"]
877 schoenebeck 781 )
878 schoenebeck 1005 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
879 schoenebeck 781
880 schoenebeck 554 AC_ARG_ENABLE(voice-steal-algo,
881     [ --enable-voice-steal-algo
882     Voice stealing algorithm to be used. Currently
883     available options:
884     none:
885     Disable voice stealing completely.
886 schoenebeck 563 oldestvoiceonkey (default):
887 schoenebeck 554 Try to kill a voice on the same key first,
888     if no success, proceed with the oldest key.
889 schoenebeck 563 oldestkey:
890 schoenebeck 554 Try to kill a voice from the oldest active
891     key.],
892     [ if test ! "(" "${enableval}" = "none" \
893     -o "${enableval}" = "oldestvoiceonkey" \
894     -o "${enableval}" = "oldestkey" ")" ; then
895     AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
896     else
897     config_voice_steal_algo="${enableval}"
898 schoenebeck 579 fi
899 schoenebeck 554 ],
900 schoenebeck 563 [config_voice_steal_algo="oldestvoiceonkey"]
901 schoenebeck 554 )
902     AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
903    
904     AC_ARG_ENABLE(sysex-buffer-size,
905     [ --enable-sysex-buffer-size
906     System Exclusive Message buffer size in kB
907     (default=2048).],
908     [config_sysex_buffer_size="${enableval}"],
909     [config_sysex_buffer_size="2048"]
910     )
911     AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
912    
913     AC_ARG_ENABLE(force-filter,
914     [ --enable-force-filter
915     If enabled will force filter to be used even if
916     no usage was define in instrument patch files.
917     (default=no).],
918 schoenebeck 1360 [config_force_filter="$enableval"],
919 schoenebeck 554 [config_force_filter="no"]
920     )
921     if test "$config_force_filter" = "yes"; then
922     AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
923     fi
924    
925     AC_ARG_ENABLE(filter-cutoff-min,
926     [ --enable-filter-cutoff-min
927     Minimum filter cutoff frequency in Hz
928     (default=100.0).],
929     [config_filter_cutoff_min="${enableval}"],
930     [config_filter_cutoff_min="100.0"]
931     )
932     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
933    
934     AC_ARG_ENABLE(filter-cutoff-max,
935     [ --enable-filter-cutoff-max
936     Maximum filter cutoff frequency in Hz
937     (default=10000.0).],
938     [config_filter_cutoff_max="${enableval}"],
939     [config_filter_cutoff_max="10000.0"]
940     )
941     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
942    
943     AC_ARG_ENABLE(override-cutoff-ctrl,
944     [ --enable-override-cutoff-ctrl
945     Override filter cutoff MIDI controller (default=no).
946     Note: you have to define the MIDI controller number
947     here, it's not a boolean parameter type! If this
948     option is used, controller number given by
949     instrument patch will be ignored and instead this
950     supplied value will be used.],
951     [config_override_cutoff_ctrl="${enableval}"],
952     [config_override_cutoff_ctrl="no"]
953     )
954     if test ! "$config_override_cutoff_ctrl" = "no"; then
955     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
956     fi
957    
958     AC_ARG_ENABLE(override-resonance-ctrl,
959     [ --enable-override-resonance-ctrl
960     Override filter resonance MIDI controller
961     (default=no). Note: you have to define the MIDI
962     controller number here, it's not a boolean
963     parameter type! If this option is used, controller
964     number given by instrument patch will be ignored
965     and instead this supplied value will be used.],
966     [config_override_resonance_ctrl="${enableval}"],
967     [config_override_resonance_ctrl="no"]
968     )
969     if test ! "$config_override_resonance_ctrl" = "no"; then
970     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
971     fi
972    
973     AC_ARG_ENABLE(override-filter-type,
974     [ --enable-override-filter-type
975     Override filter type (default=no). Options:
976     hp: for highpass
977     bp: for bandpass
978     br: for bandreject
979     lp: for lowpass
980     lpt: for lowpass turbo],
981     [ if test "${enableval}" = "hp" ; then
982     config_override_filter_type="::gig::vcf_type_highpass"
983     elif test "${enableval}" = "bp" ; then
984     config_override_filter_type="::gig::vcf_type_bandpass"
985     elif test "${enableval}" = "br" ; then
986     config_override_filter_type="::gig::vcf_type_bandreject"
987     elif test "${enableval}" = "lp" ; then
988     config_override_filter_type="::gig::vcf_type_lowpass"
989     elif test "${enableval}" = "lpt" ; then
990     config_override_filter_type="::gig::vcf_type_lowpassturbo"
991     elif test ! "${enableval}" = "no"; then
992     AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
993 schoenebeck 579 fi
994 schoenebeck 554 ],
995     [config_override_filter_type="no"]
996     )
997     if test ! "$config_override_filter_type" = "no"; then
998     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
999     fi
1000    
1001 schoenebeck 563 AC_ARG_ENABLE(gs-checksum,
1002     [ --enable-gs-checksum
1003     Enable Roland General Synth SysEx checksum check
1004     (default=no). If this is enabled, all GS SysEx
1005     messages which do not provide a correct checksum
1006     will be ignored. This is disabled by default as
1007     not all devices honor GS checksums.],
1008 schoenebeck 1360 [config_assert_gs_sysex_checksum="$enableval"],
1009 schoenebeck 563 [config_assert_gs_sysex_checksum="no"]
1010     )
1011     if test "config_assert_gs_sysex_checksum" = "yes"; then
1012     AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
1013     fi
1014    
1015 schoenebeck 829 AC_ARG_ENABLE(portamento-time-min,
1016     [ --enable-portamento-time-min
1017     Minimum Portamento time in seconds
1018     (default=0.1).],
1019     [config_portamento_time_min="${enableval}"],
1020     [config_portamento_time_min="0.1"]
1021     )
1022     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
1023    
1024     AC_ARG_ENABLE(portamento-time-max,
1025     [ --enable-portamento-time-max
1026     Maximum Portamento time in seconds
1027     (default=32).],
1028     [config_portamento_time_max="${enableval}"],
1029     [config_portamento_time_max="32"]
1030     )
1031     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
1032    
1033     AC_ARG_ENABLE(portamento-time-default,
1034     [ --enable-portamento-time-default
1035     Default Portamento time in seconds
1036     (default=1).],
1037     [config_portamento_time_default="${enableval}"],
1038     [config_portamento_time_default="1"]
1039     )
1040     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
1041    
1042 schoenebeck 714 AC_ARG_ENABLE(signed-triang-algo,
1043     [ --enable-signed-triang-algo
1044     Signed triangular wave algorithm to be used (e.g. for LFOs).
1045     Currently available options:
1046     intmath:
1047     Uses integer math without any branch will then be
1048     converted to floating point value for each sample point.
1049     This int->float conversion might hurt on some systems.
1050 senkov 720 intmathabs:
1051     Similar to intmath but uses abs() function.
1052     Depending on compiler and platrofm this could
1053     perform better than integer math as it avoids
1054 schoenebeck 1360 an extra integer multiply instruction.
1055 schoenebeck 714 diharmonic:
1056     The triangular wave will be approximated by adding two
1057     sinusoidials. This solution might especially hurt on
1058     systems with weak floating point unit.
1059     benchmark (default):
1060     This is not an algorithm. Use this option if the
1061     appropriate algorithm should be automatically
1062     chosen by the configure script by performing a
1063     benchmark between the algorithms mentioned above.
1064     This will NOT work for cross compilation!],
1065     [ if test ! "(" "${enableval}" = "intmath" \
1066 senkov 720 -o "${enableval}" = "intmathabs" \
1067 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
1068     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
1069     else
1070     config_signed_triang_algo="${enableval}"
1071     fi
1072     ],
1073     [config_signed_triang_algo="benchmark"]
1074     )
1075 schoenebeck 563
1076 schoenebeck 714 AC_ARG_ENABLE(unsigned-triang-algo,
1077     [ --enable-unsigned-triang-algo
1078     Unsigned triangular wave algorithm to be used (e.g. for LFOs).
1079     Currently available options:
1080     intmath:
1081     Uses integer math without any branch will then be
1082     converted to floating point value for each sample point.
1083     This int->float conversion might hurt on some systems.
1084 senkov 720 intmathabs:
1085     Similar to intmath but uses abs() function.
1086     Depending on compiler and platrofm this could
1087     perform better than integer math as it avoids
1088 schoenebeck 1360 an extra integer multiply instruction.
1089 schoenebeck 714 diharmonic:
1090     The triangular wave will be approximated by adding two
1091     sinusoidials. This solution might especially hurt on
1092     systems with weak floating point unit.
1093     benchmark (default):
1094     This is not an algorithm. Use this option if the
1095     appropriate algorithm should be automatically
1096     chosen by the configure script by performing a
1097     benchmark between the algorithms mentioned above.
1098     This will NOT work for cross compilation!],
1099     [ if test ! "(" "${enableval}" = "intmath" \
1100 senkov 720 -o "${enableval}" = "intmathabs" \
1101 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
1102     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
1103     else
1104     config_unsigned_triang_algo="${enableval}"
1105     fi
1106     ],
1107     [config_unsigned_triang_algo="benchmark"]
1108     )
1109    
1110 iliev 716 AC_ARG_ENABLE(process-muted-channels,
1111     [ --enable-process-muted-channels
1112     Enable processing of muted channels (default=no).
1113     In that mode all MIDI events in the muted channels
1114     will be processed. This will provide information
1115     about the active voices in the muted channels and
1116     will not discard notes, triggered in mute mode,
1117     when the channel is unmuted. But also will reduce
1118     the efficiency.],
1119 schoenebeck 1360 [config_process_muted_channels="$enableval"],
1120 iliev 716 [config_process_muted_channels="no"]
1121     )
1122     if test "$config_process_muted_channels" = "yes"; then
1123     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
1124     fi
1125 schoenebeck 714
1126 schoenebeck 849 AC_ARG_ENABLE(process-all-notes-off,
1127     [ --disable-process-all-notes-off
1128     Disable interpretation of All-Notes-Off MIDI
1129     messages (default=on). By default LS will release
1130     all voices whenever it receives an All-Notes-Off
1131     MIDI message. You can disable this behavior, so
1132     that LS simply ignores such messages.],
1133 schoenebeck 1360 [config_process_all_notes_off="$enableval"],
1134 schoenebeck 849 [config_process_all_notes_off="yes"]
1135     )
1136     if test "$config_process_all_notes_off" = "yes"; then
1137     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
1138     fi
1139    
1140 persson 830 AC_ARG_ENABLE(interpolate-volume,
1141     [ --disable-interpolate-volume
1142     Disable interpolation of volume modulation
1143     (default=on). With this enabled, the volume changes
1144     generated by for example the envelope generator
1145     will be smoother, minimizing the risk for audio
1146     clicks. Disable it to reduce CPU usage.],
1147 schoenebeck 1360 [config_interpolate_volume="$enableval"],
1148 persson 830 [config_interpolate_volume="yes"]
1149     )
1150     if test "$config_interpolate_volume" = "yes"; then
1151     AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
1152     fi
1153 iliev 716
1154 schoenebeck 1762 AC_ARG_ENABLE(master-volume-sysex-by-port,
1155     [ --enable-master-volume-sysex-by-port
1156     Whether global volume sysex message should be
1157     applied globally to the whole sampler or only to
1158     the sampler channels connected to the same MIDI
1159     input port on which the sysex message arrived on.
1160     By default global volume sysex messages apply
1161     globally to the whole sampler, since many MIDI
1162     devices behave that way.],
1163     [config_master_volume_sysex_by_port="$enableval"],
1164     [config_master_volume_sysex_by_port="no"]
1165     )
1166     if test "$config_master_volume_sysex_by_port" = "yes"; then
1167     AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
1168     fi
1169    
1170 schoenebeck 1212 AC_ARG_ENABLE(plugin-dir,
1171     [ --enable-plugin-dir
1172     Directory where the sampler shall look for potential plugins,
1173     that is 3rd party shared libraries that should be loaded by
1174     the sampler on startup. By default the sampler will search
1175     for plugins in the subdirectory "plugins" below its own
1176     library directory.
1177     (i.e. /usr/local/lib/linuxsampler/plugins)],
1178     [config_plugin_dir="${enableval}"],
1179     [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1180     )
1181     AC_SUBST(config_plugin_dir)
1182 persson 830
1183 schoenebeck 1364 AC_ARG_ENABLE(default-instruments-db-location,
1184     [ --enable-default-instruments-db-location
1185     Only when instruments DB feature is enabled: file name
1186     which shall be taken as default location of the
1187     instruments DB file. This location can still be
1188     overridden at runtime with a command line switch.
1189     (default: /var/lib/linuxsampler/instruments.db)],
1190     [config_default_instruments_db_file="${enableval}"],
1191     [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1192     )
1193     AC_DEFINE_UNQUOTED(
1194     CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1195     "$config_default_instruments_db_file",
1196     [Only when instruments DB feature is enabled: default location of the DB file.]
1197     )
1198 schoenebeck 1432 AC_SUBST(config_default_instruments_db_file)
1199 schoenebeck 1212
1200 schoenebeck 1364
1201 schoenebeck 554 ###########################################################################
1202 schoenebeck 714 # Automatic Benchmarks (to detect the best algorithms for the system)
1203    
1204     AC_LANG_SAVE
1205    
1206     if test "$config_signed_triang_algo" = "benchmark"; then
1207     echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1208     AC_LANG_CPLUSPLUS
1209     AC_TRY_RUN([
1210     #define SIGNED 1
1211     #define SILENT 1
1212 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1213 schoenebeck 714 ],
1214     triang_signed=0,
1215     triang_signed=$?,
1216     triang_signed=0
1217     )
1218     if test "$triang_signed" = "2"; then
1219     config_signed_triang_algo="intmath"
1220     echo "integer math"
1221     elif test "$triang_signed" = "3"; then
1222     config_signed_triang_algo="diharmonic"
1223     echo "di harmonics"
1224 senkov 720 elif test "$triang_signed" = "5"; then
1225     config_signed_triang_algo="intmathabs"
1226     echo "integer math using abs()"
1227 schoenebeck 714 else
1228     echo "Benchmark of signed triangular wave algorithms failed!"
1229     echo "Maybe you are doing cross compilation? In that case you have to select"
1230     echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1231     echo "Call './configure --help' for further information or read configure.in."
1232     exit -1;
1233     fi
1234 schoenebeck 1165 else
1235     case "$config_signed_triang_algo" in
1236     intmath)
1237     triang_signed=2 ;;
1238     diharmonic)
1239     triang_signed=3 ;;
1240     intmathabs)
1241     triang_signed=5 ;;
1242     esac
1243 schoenebeck 714 fi
1244 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1245 schoenebeck 714
1246     if test "$config_unsigned_triang_algo" = "benchmark"; then
1247     echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1248     AC_LANG_CPLUSPLUS
1249     AC_TRY_RUN([
1250     #define SIGNED 0
1251     #define SILENT 1
1252 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1253 schoenebeck 714 ],
1254     triang_unsigned=0,
1255     triang_unsigned=$?,
1256     triang_unsigned=0
1257     )
1258     if test "$triang_unsigned" = "2"; then
1259     config_unsigned_triang_algo="intmath"
1260     echo "integer math"
1261     elif test "$triang_unsigned" = "3"; then
1262     config_unsigned_triang_algo="diharmonic"
1263     echo "di harmonics"
1264 senkov 720 elif test "$triang_unsigned" = "5"; then
1265 schoenebeck 726 config_unsigned_triang_algo="intmathabs"
1266 senkov 720 echo "integer math using abs()"
1267 schoenebeck 714 else
1268     echo "Benchmark of unsigned triangular wave algorithms failed!"
1269     echo "Maybe you are doing cross compilation? In that case you have to select"
1270     echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1271     echo "Call './configure --help' for further information or read configure.in."
1272     exit -1;
1273     fi
1274 schoenebeck 1165 else
1275     case "$config_unsigned_triang_algo" in
1276     intmath)
1277     triang_unsigned=2 ;;
1278     diharmonic)
1279     triang_unsigned=3 ;;
1280     intmathabs)
1281     triang_unsigned=5 ;;
1282     esac
1283 schoenebeck 714 fi
1284 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1285 schoenebeck 714
1286     AC_LANG_RESTORE
1287    
1288    
1289     ###########################################################################
1290 schoenebeck 554 # Create Build Files
1291    
1292 schoenebeck 9 AM_CONFIG_HEADER(config.h)
1293 schoenebeck 697 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1294 schoenebeck 9
1295     AC_LANG_CPLUSPLUS
1296 persson 497
1297     # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1298     # this, the dlfcn.h check in am_prog_libtool may fail.
1299     AC_CHECK_HEADER(stdlib.h)
1300    
1301 schoenebeck 654 AC_OUTPUT( \
1302     Makefile \
1303     man/Makefile \
1304     man/linuxsampler.1 \
1305     src/Makefile \
1306 iliev 1161 src/db/Makefile \
1307 schoenebeck 654 src/network/Makefile \
1308     src/engines/Makefile \
1309     src/engines/gig/Makefile \
1310 iliev 2012 src/engines/sf2/Makefile \
1311     src/engines/sfz/Makefile \
1312 schoenebeck 654 src/engines/common/Makefile \
1313 schoenebeck 1722 src/effects/Makefile \
1314 schoenebeck 1321 src/common/Makefile \
1315 schoenebeck 654 src/testcases/Makefile \
1316     src/drivers/Makefile \
1317     src/drivers/audio/Makefile \
1318     src/drivers/midi/Makefile \
1319 schoenebeck 1375 src/plugins/Makefile \
1320 persson 1777 src/hostplugins/Makefile \
1321     src/hostplugins/dssi/Makefile \
1322     src/hostplugins/lv2/Makefile \
1323     src/hostplugins/vst/Makefile \
1324 iliev 1846 src/hostplugins/au/Makefile \
1325 schoenebeck 654 linuxsampler.spec \
1326     debian/Makefile \
1327     Artwork/Makefile \
1328     scripts/Makefile \
1329     osx/Makefile \
1330 schoenebeck 1175 osx/linuxsampler.xcodeproj/Makefile \
1331 schoenebeck 654 Documentation/Makefile \
1332     Documentation/Engines/Makefile \
1333     Documentation/Engines/gig/Makefile \
1334 schoenebeck 697 linuxsampler.pc \
1335     Doxyfile \
1336 schoenebeck 654 )
1337 schoenebeck 554
1338 schoenebeck 1212 # resolve all nested variables in '${config_plugin_dir}'
1339     # (merely for providing a human readable summary below)
1340     while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1341     config_plugin_dir=`eval echo ${config_plugin_dir}`
1342     done
1343 schoenebeck 554
1344 schoenebeck 1212
1345 schoenebeck 554 ###########################################################################
1346     # Output All Configuration Options
1347    
1348     echo ""
1349     echo "#####################################################################"
1350     echo "# LinuxSampler Configuration #"
1351     echo "#-------------------------------------------------------------------#"
1352 schoenebeck 1876 echo "# Release Version: ${LINUXSAMPLER_RELEASE_MAJOR}.${LINUXSAMPLER_RELEASE_MINOR}.${LINUXSAMPLER_RELEASE_BUILD}"
1353     echo "# LSCP Version: ${LSCP_RELEASE_MAJOR}.${LSCP_RELEASE_MINOR}"
1354     echo "#-------------------------------------------------------------------"
1355 schoenebeck 617 echo "# Assembly Optimizations: ${config_asm}"
1356 schoenebeck 554 echo "# Development Mode: ${config_dev_mode}"
1357     echo "# Debug Level: ${config_debug_level}"
1358     echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1359     echo "# Preload Samples: ${config_preload_samples}"
1360     echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1361     echo "# Maximum Events: ${config_max_events}"
1362     echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1363     echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1364     echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1365     echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1366     echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1367     echo "# Stream Size: ${config_stream_size}"
1368 schoenebeck 1800 echo "# Default Maximum Disk Streams: ${config_max_streams}"
1369     echo "# Default Maximum Voices: ${config_max_voices}"
1370 schoenebeck 738 echo "# Default Subfragment Size: ${config_subfragment_size}"
1371 schoenebeck 1005 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1372 schoenebeck 563 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1373 schoenebeck 714 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1374     echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1375 schoenebeck 554 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1376 schoenebeck 829 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1377     echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1378     echo "# Default Portamento Time: ${config_portamento_time_default} s"
1379 schoenebeck 554 echo "# Force Filter Usage: ${config_force_filter}"
1380     echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1381     echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1382     echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1383     echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1384     echo "# Override Filter Type: ${config_override_filter_type}"
1385 schoenebeck 563 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1386 iliev 716 echo "# Process Muted Channels: ${config_process_muted_channels}"
1387 schoenebeck 849 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1388 schoenebeck 1762 echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
1389 persson 830 echo "# Interpolate Volume: ${config_interpolate_volume}"
1390 schoenebeck 1364 echo "# Instruments database support: ${config_instruments_db}"
1391     if test "$config_instruments_db" = "yes"; then
1392     echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1393     fi
1394 schoenebeck 1212 echo "# Plugin Path: ${config_plugin_dir}"
1395 schoenebeck 1876 echo "#-------------------------------------------------------------------"
1396     echo "# MIDI Input Drivers:"
1397     echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack_midi}, CoreMIDI: ${config_have_coremidi}, MME: ${config_have_mme}, MidiShare: ${config_have_midishare}"
1398     echo "#-------------------------------------------------------------------"
1399     echo "# Audio Output Drivers:"
1400     echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack}, ARTS: ${config_have_arts}, CoreAudio: ${config_have_coreaudio}, ASIO: ${config_have_asio}"
1401     echo "#-------------------------------------------------------------------"
1402 iliev 2012 echo "# Sampler Engines:"
1403     echo "# GIG: yes, SF2: ${config_have_sf2}, SFZ: yes"
1404     echo "#-------------------------------------------------------------------"
1405 schoenebeck 2124 echo "# Effect plugin systems for internal effects:"
1406     echo "# LADSPA: yes"
1407     echo "#-------------------------------------------------------------------"
1408 schoenebeck 1876 echo "# Building sampler as plugin for following host standards:"
1409     echo "# DSSI: ${config_have_dssi}, LV2: ${config_have_lv2}, VST: ${config_have_vst}, AU: ${config_have_au}"
1410 schoenebeck 554 echo "#-------------------------------------------------------------------#"
1411     echo "# Read './configure --help' or file 'configure.in' for details. #"
1412     echo "#####################################################################"
1413     echo ""
1414     echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1415     echo ""

  ViewVC Help
Powered by ViewVC