/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Annotation of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 2185 - (hide annotations) (download)
Sun Jun 19 09:09:38 2011 UTC (12 years, 9 months ago) by persson
Original Path: linuxsampler/trunk/configure.in
File size: 57425 byte(s)
* fixed compilation with gcc 4.6.1
* another "make dist" fix, for LV2 plugin
* made --enable-pthread-testcancel default on Mac OS X
* Mac OS X: fixed hanging threads

1 schoenebeck 9 AC_INIT(configure.in)
2 schoenebeck 697
3     #------------------------------------------------------------------------------------
4     # LinuxSampler's / liblinuxsampler's "official" release version:
5    
6 schoenebeck 1956 LINUXSAMPLER_RELEASE_MAJOR=1
7     LINUXSAMPLER_RELEASE_MINOR=0
8 schoenebeck 2140 LINUXSAMPLER_RELEASE_BUILD=0.cvs10
9 schoenebeck 697
10     #------------------------------------------------------------------------------------
11     # The following is the libtool / shared library version. This doesn't have to
12     # do anything with the release version. It MUST conform to the following rules:
13     #
14     # 1. Start with version information of `0:0:0' for each libtool library.
15     # 2. Update the version information only immediately before a public release of
16     # your software. More frequent updates are unnecessary, and only guarantee
17     # that the current interface number gets larger faster.
18     # 3. If the library source code has changed at all since the last update, then
19     # increment revision (`c:r:a' becomes `c:r+1:a').
20     # 4. If any interfaces have been added, removed, or changed since the last update,
21     # increment current, and set revision to 0.
22     # 5. If any interfaces have been added since the last public release, then increment
23     # age.
24     # 6. If any interfaces have been removed since the last public release, then set age
25     # to 0.
26    
27 schoenebeck 1956 LIBLINUXSAMPLER_LT_CURRENT=3
28 schoenebeck 697 LIBLINUXSAMPLER_LT_REVISION=0
29 schoenebeck 1956 LIBLINUXSAMPLER_LT_AGE=0
30 schoenebeck 697 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31    
32 schoenebeck 947 #------------------------------------------------------------------------------------
33     # the LSCP specification version this LinuSampler release complies with:
34    
35     LSCP_RELEASE_MAJOR=1
36 schoenebeck 2024 LSCP_RELEASE_MINOR=5
37 schoenebeck 947
38     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40    
41 schoenebeck 1741 AC_PROG_CXX
42 persson 1777 AC_LIBTOOL_WIN32_DLL
43 schoenebeck 697 AM_PROG_LIBTOOL
44    
45     AC_SUBST(SHLIB_VERSION_ARG)
46     AC_SUBST(SHARED_VERSION_INFO)
47    
48 schoenebeck 12 AC_C_BIGENDIAN
49 persson 1895 AC_CANONICAL_HOST
50 schoenebeck 9
51 schoenebeck 1639 PKG_PROG_PKG_CONFIG
52 schoenebeck 275
53 schoenebeck 554 ###########################################################################
54     # General Checks
55 schoenebeck 275
56 persson 1931 AM_CONDITIONAL(CROSS_COMPILING, test $cross_compiling = yes)
57    
58 schoenebeck 510 AC_MSG_CHECKING([whether x86 architecture])
59 schoenebeck 9 def_arch_x86=0
60 persson 1895 case $host_cpu in
61 persson 1794 "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
62 schoenebeck 9 echo "yes"
63     def_arch_x86=1;;
64     *)
65     echo "no";;
66     esac
67     AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
68    
69 schoenebeck 510 # determine the right gcc switch for CPU specific optimizations
70 schoenebeck 829 # (only if the user did not provide one)
71 schoenebeck 510 CXX_CPU_SWITCH=
72 schoenebeck 829 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
73 persson 1895 if test "$def_arch_x86" = 1 -a "$host_cpu" != "x86_64"; then
74     CXX_CPU_SWITCH="-march=$host_cpu"
75 schoenebeck 909 elif test "$target_cpu" = "ppc"; then
76 persson 1895 CXX_CPU_SWITCH="-arch=$host_cpu"
77 schoenebeck 829 fi
78 schoenebeck 510 fi
79     AC_SUBST([CXX_CPU_SWITCH])
80    
81 senoner 1502 # check if we're on MS Windows
82     AC_CHECK_HEADERS(
83     mmsystem.h,
84     have_windows=1,
85 persson 1895 have_windows=0,
86     [#include <windef.h>]
87 senoner 1502 )
88     AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
89    
90 schoenebeck 288 AC_MSG_CHECKING([whether UNIX98 compatible])
91     AC_LANG_SAVE
92     AC_LANG_C
93     AC_TRY_RUN([
94     #ifndef _GNU_SOURCE
95     #define _GNU_SOURCE 1
96     #endif
97     #include <features.h>
98     void main(void) {
99     #if _XOPEN_SOURCE >= 500
100     exit(0); /* UNIX98 compatible */
101     #else
102     exit(-1); /* not UNIX98 compatible */
103     #endif
104     }
105     ],
106     have_unix98="yes",
107     have_unix98="no",
108     have_unix98="no"
109     )
110     AC_LANG_RESTORE
111     AC_MSG_RESULT([$have_unix98])
112 senoner 1502 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
113 schoenebeck 288 if test "x$HAVE_UNIX98" = "x"; then
114     echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
115     echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
116     echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
117     echo "have a UNIX98 compatible system."
118     exit -1;
119     fi
120     fi
121    
122 wylder 822 # check for <features.h>
123     AC_CHECK_HEADERS(features.h)
124 wylder 821
125 schoenebeck 1454 # test for POSIX thread library
126     m4_ifdef([m4_include(m4/pthread.m4)],,
127     [sinclude([m4/pthread.m4])])
128     ACX_PTHREAD
129     LIBS="$PTHREAD_LIBS $LIBS"
130     CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
131     CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
132     CC="$PTHREAD_CC"
133 schoenebeck 852
134 schoenebeck 1454 # check for a bug in NPTL-enabled glibc
135     # (see Gentoo bug report #194076)
136     AC_ARG_ENABLE(nptl-bug-check,
137     [ --disable-nptl-bug-check
138     Disable check for a bug in certain NPTL-enabled
139     glibc versions that caused crashs.],
140     [config_check_nptl_bug="$enableval"],
141     [config_check_nptl_bug="yes"]
142     )
143     if test "$config_check_nptl_bug" = "yes"; then
144     m4_ifdef([m4_include(m4/nptl_bug.m4)],,
145     [sinclude([m4/nptl_bug.m4])])
146     ACX_NPTL_GLIBC_BUG([
147     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
148     echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
149     echo "probably crash due to this. Please report us the system you are"
150     echo "using and/or file a bug report to the bug tracking system of"
151     echo "your distribution."
152     echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
153     echo "well, you can try to circumvent this problem for now by setting"
154     echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
155     echo "should cause this test to pass."
156     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
157     AC_MSG_ERROR([possibly NPTL glibc bug detected])
158     ])
159     else
160     echo "NPTL glibc bug check disabled"
161     fi
162    
163 schoenebeck 1742 # FIXME: this is actually a dependency of libgig, not of LS directly, why
164     # isn't it hidden by libgig?
165     AC_CHECK_HEADERS(uuid/uuid.h)
166     AC_SEARCH_LIBS(uuid_generate, uuid)
167 schoenebeck 1454
168    
169 schoenebeck 1742
170 schoenebeck 852 ###########################################################################
171 schoenebeck 288 # Checks for available audio and MIDI systems / drivers
172     # (we throw an error if there's not at least one system for audio output and MIDI input available)
173 schoenebeck 852
174 schoenebeck 288 have_midi_input_driver="false"
175     have_audio_output_driver="false"
176    
177 schoenebeck 852 # ALSA
178     AC_ARG_ENABLE(alsa-driver,
179     [ --disable-alsa-driver
180     Disable support for the Advanced Linux Sound
181     Architecture (ALSA).],
182 schoenebeck 1360 [config_alsa_driver="$enableval"],
183 schoenebeck 852 [config_alsa_driver="yes"]
184 schoenebeck 18 )
185 schoenebeck 852 have_alsa=0
186     if test "$config_alsa_driver" = "yes"; then
187     AC_CHECK_HEADER(alsa/asoundlib.h,
188     AC_CHECK_LIB(asound, main,
189     have_alsa=1
190     ,
191     have_alsa=0
192     )
193     ,
194     have_alsa=0
195     )
196     if test "$have_alsa" = "1"; then
197     have_midi_input_driver="true"
198     have_audio_output_driver="true";
199     fi
200    
201     echo -n "checking Alsa version... "
202     AC_LANG_SAVE
203     AC_LANG_C
204     AC_TRY_RUN([
205     #include <alsa/asoundlib.h>
206     void main(void) {
207     /* ensure backward compatibility */
208     #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
209     #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
210     #endif
211     exit(SND_LIB_MAJOR);
212     }
213     ],
214     alsa_major=0,
215     alsa_major=$?,
216     alsa_major=0
217     )
218     AC_TRY_RUN([
219     #include <alsa/asoundlib.h>
220     void main(void) {
221     /* ensure backward compatibility */
222     #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
223     #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
224     #endif
225     exit(SND_LIB_MINOR);
226     }
227     ],
228     alsa_minor=0,
229     alsa_minor=$?,
230     alsa_minor=0
231     )
232     AC_TRY_RUN([
233     #include <alsa/asoundlib.h>
234     void main(void) {
235     /* ensure backward compatibility */
236     #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
237     #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
238     #endif
239     exit(SND_LIB_SUBMINOR);
240     }
241     ],
242     alsa_subminor=0,
243     alsa_subminor=$?,
244     alsa_subminor=0
245     )
246     AC_LANG_RESTORE
247     echo "$alsa_major.$alsa_minor.$alsa_subminor";
248     AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
249     AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
250     AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
251     else
252     echo "ALSA support disabled by configure script parameter"
253 schoenebeck 18 fi
254 schoenebeck 291 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
255 schoenebeck 288 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
256 schoenebeck 1876 config_have_alsa="no"
257     if test $have_alsa = "1"; then
258     config_have_alsa="yes"
259     fi
260 schoenebeck 18
261 schoenebeck 852 # JACK
262     AC_ARG_ENABLE(jack-driver,
263     [ --disable-jack-driver
264     Disable support for the Jack Audio Connection Kit
265     (JACK).],
266 schoenebeck 1360 [config_jack_driver="$enableval"],
267 schoenebeck 852 [config_jack_driver="yes"]
268 schoenebeck 18 )
269 schoenebeck 852 have_jack=0
270     if test "$config_jack_driver" = "yes"; then
271     PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
272     if test $have_jack = "1"; then
273     AC_SUBST(JACK_LIBS)
274     AC_SUBST(JACK_CFLAGS)
275 persson 1748 linuxsampler_save_LIBS=$LIBS
276     LIBS="$JACK_LIBS $LIBS"
277     AC_CHECK_FUNCS(jack_client_name_size jack_client_open)
278     LIBS=$linuxsampler_save_LIBS
279 schoenebeck 852 have_audio_output_driver="true";
280     fi
281 schoenebeck 33 else
282 schoenebeck 852 echo "JACK support disabled by configure script parameter"
283 schoenebeck 33 fi
284 schoenebeck 852 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
285     AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
286 schoenebeck 1876 config_have_jack="no"
287     if test $have_jack = "1"; then
288     config_have_jack="yes"
289     fi
290 schoenebeck 31
291 persson 1651 # JACK MIDI
292     have_jack_midi=0
293     if test $have_jack = "1"; then
294 persson 1652 linuxsampler_save_CFLAGS=$CFLAGS
295     linuxsampler_save_LIBS=$LIBS
296     CFLAGS="$JACK_CFLAGS $CFLAGS"
297     LIBS="$JACK_LIBS $LIBS"
298     AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
299     if test $have_jack_midi = "1"; then
300     AC_CHECK_FUNCS(jack_midi_get_event_count)
301     AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
302     jack_midi_clear_buffer(0, 0);
303     ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
304     [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
305     have_midi_input_driver="true"
306     fi
307     CFLAGS=$linuxsampler_save_CFLAGS
308     LIBS=$linuxsampler_save_LIBS
309 persson 1651 fi
310     AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
311     AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
312     [Define to 1 if you have JACK with MIDI support installed.])
313 schoenebeck 1876 config_have_jack_midi="no"
314     if test $have_jack_midi = "1"; then
315     config_have_jack_midi="yes"
316     fi
317 persson 1651
318 schoenebeck 838 # ARTS
319 schoenebeck 852 AC_ARG_ENABLE(arts-driver,
320     [ --disable-arts-driver
321     Disable support for the Analogue Realtime System
322     (aRts).],
323 schoenebeck 1360 [config_arts_driver="$enableval"],
324 schoenebeck 852 [config_arts_driver="yes"]
325     )
326     have_arts=0
327     if test "$config_arts_driver" = "yes"; then
328     m4_ifdef([m4_include(m4/arts.m4)],,
329     [sinclude([m4/arts.m4])])
330     AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
331     if test "$have_arts" = "1"; then
332     have_audio_output_driver="true"
333     fi
334     else
335     echo "ARTS support disabled by configure script parameter"
336 schoenebeck 838 fi
337     AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
338     AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
339 schoenebeck 1876 config_have_arts="no"
340     if test $have_arts = "1"; then
341     config_have_arts="yes"
342     fi
343 schoenebeck 838
344 senoner 1502 # ASIO AUDIO (Win32)
345     AC_ARG_ENABLE(asiosdk-dir,
346     [ --enable-asiosdk-dir
347     Directory where the ASIO SDK is located, this automatically
348     enables the compilation of the ASIO audio output driver.],
349     [config_asiosdk_dir="${enableval}"],
350     [config_asiosdk_dir="."]
351     )
352     AC_SUBST(config_asiosdk_dir)
353    
354     AC_ARG_ENABLE(asio-driver,
355     [ --disable-asio-driver
356     Disable support for the Windows ASIO driver.],
357     [config_asio_driver="$enableval"],
358     [config_asio_driver="yes"]
359     )
360     have_asio=0
361     ASIOSDK_BASEDIR=
362     if test "$config_asio_driver" = "yes"; then
363     asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
364     echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
365     if test -e $asiosdk_headerfile ; then
366     echo yes
367     have_asio=1
368     ASIOSDK_BASEDIR="$config_asiosdk_dir"
369     else
370     echo no
371     have_asio=0
372     fi
373     if test "$have_asio" = "1"; then
374     have_audio_output_driver="true"
375     fi
376     else
377     echo "Windows ASIO support disabled by configure script parameter"
378     fi
379     AC_SUBST(ASIOSDK_BASEDIR)
380     AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
381     AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
382 schoenebeck 1876 config_have_asio="no"
383     if test $have_asio = "1"; then
384     config_have_asio="yes"
385     fi
386 senoner 1502
387 schoenebeck 609 # MidiShare (Linux, OS X, Windows)
388 schoenebeck 852 AC_ARG_ENABLE(midishare-driver,
389     [ --disable-midishare-driver
390     Disable support for the MidiShare system.],
391 schoenebeck 1360 [config_midishare_driver="$enableval"],
392 schoenebeck 852 [config_midishare_driver="yes"]
393 schoenebeck 609 )
394 schoenebeck 852 have_midishare=0
395     if test "$config_midishare_driver" = "yes"; then
396     AC_CHECK_HEADER(MidiShare.h,
397     AC_CHECK_LIB(MidiShare, MidiCountEvs,
398     have_midishare=1,
399     have_midishare=0
400     )
401     ,
402     have_midishare=0
403     )
404     if test "$have_midishare" = "1"; then
405     have_midi_input_driver="true"
406     fi
407     else
408     echo "MidiShare support disabled by configure script parameter"
409 schoenebeck 609 fi
410     AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
411     AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
412 schoenebeck 1876 config_have_midishare="no"
413     if test $have_midishare = "1"; then
414     config_have_midishare="yes"
415     fi
416 schoenebeck 609
417     # CoreMIDI (OS X)
418 schoenebeck 852 AC_ARG_ENABLE(coremidi-driver,
419     [ --disable-coremidi-driver
420     Disable support for the Apple CoreMIDI system.],
421 schoenebeck 1360 [config_coremidi_driver="$enableval"],
422 schoenebeck 852 [config_coremidi_driver="yes"]
423 schoenebeck 609 )
424 schoenebeck 852 have_coremidi=0
425     if test "$config_coremidi_driver" = "yes"; then
426     AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
427     have_coremidi=1,
428     have_coremidi=0
429     )
430     if test "$have_coremidi" = "1"; then
431     have_midi_input_driver="true"
432     fi
433     else
434     echo "CoreMIDI support disabled by configure script parameter"
435 schoenebeck 609 fi
436     AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
437     AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
438 schoenebeck 1876 config_have_coremidi="no"
439     if test $have_coremidi = "1"; then
440     config_have_coremidi="yes"
441     fi
442 schoenebeck 609
443 iliev 1829 # CoreAudio (OS X)
444     AC_ARG_ENABLE(coreaudio-driver,
445     [ --disable-coreaudio-driver
446     Disable support for the Apple CoreAudio system.],
447     [config_coreaudio_driver="$enableval"],
448     [config_coreaudio_driver="yes"]
449     )
450     have_coreaudio=0
451     if test "$config_coreaudio_driver" = "yes"; then
452     AC_CHECK_HEADER(CoreAudio/CoreAudio.h,
453     have_coreaudio=1,
454     have_coreaudio=0
455     )
456     if test "$have_coreaudio" = "1"; then
457     have_audio_output_driver="true"
458     fi
459     else
460     echo "CoreAudio support disabled by configure script parameter"
461     fi
462     AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1")
463     AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.])
464 schoenebeck 1876 config_have_coreaudio="no"
465     if test $have_coreaudio = "1"; then
466     config_have_coreaudio="yes"
467     fi
468 iliev 1829
469 senoner 1502 # MME MIDI (Win32)
470     AC_ARG_ENABLE(mmemidi-driver,
471     [ --disable-mmemidi-driver
472     Disable support for the Windows MME MIDI system.],
473     [config_mmemidi_driver="$enableval"],
474     [config_mmemidi_driver="yes"]
475     )
476     have_mmemidi=0
477     if test "$config_mmemidi_driver" = "yes"; then
478     AC_CHECK_HEADERS(mmsystem.h,
479     have_mmemidi=1,
480     have_mmemidi=0
481     )
482     if test "$have_mmemidi" = "1"; then
483     have_midi_input_driver="true"
484     fi
485     else
486     echo "MME MIDI support disabled by configure script parameter"
487     fi
488     AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
489     AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
490 schoenebeck 1876 config_have_mme="no"
491     if test $have_mmemidi = "1"; then
492     config_have_mme="yes"
493     fi
494 senoner 1502
495 persson 1777 # DSSI
496     AC_CHECK_HEADERS(dssi.h,
497 schoenebeck 1876 config_have_dssi="yes",
498     config_have_dssi="no")
499     AM_CONDITIONAL(HAVE_DSSI, test $config_have_dssi = "yes")
500 persson 1777
501     # LV2
502 schoenebeck 1876 PKG_CHECK_MODULES(LV2, lv2core, config_have_lv2="yes", config_have_lv2="no")
503     if test $config_have_lv2 = "no"; then
504     AC_CHECK_HEADER(lv2.h, config_have_lv2="yes", config_have_lv2="no")
505 persson 1777 fi
506 schoenebeck 1876 AM_CONDITIONAL(HAVE_LV2, test $config_have_lv2 = "yes")
507 persson 1777
508     # VST
509     AC_ARG_ENABLE(vstsdk-dir,
510     [ --enable-vstsdk-dir
511     Directory where the VST SDK is located.
512     This automatically enables the compilation
513     of the VST plugin.],
514     [VSTSDK_DIR="${enableval}"],
515     [VSTSDK_DIR=]
516     )
517     AC_SUBST(VSTSDK_DIR)
518     AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
519 schoenebeck 1876 config_have_vst="no"
520     if test "x$VSTSDK_DIR" != "x"; then
521     config_have_vst="yes"
522     fi
523 persson 1777
524 iliev 1846 # AU
525     AC_CHECK_HEADERS(AudioUnit/AudioUnit.h,
526 schoenebeck 1876 config_have_au="yes",
527     config_have_au="no")
528     AM_CONDITIONAL(HAVE_AU, test $config_have_au = "yes")
529 iliev 1855 AM_CONDITIONAL(HAVE_AUFLAGS, test "$AUFLAGS" != "")
530 persson 1777
531 persson 2183 if test $config_have_au = "yes" ; then
532     if test "x$DEVELOPER_EXTRAS_DIR" = "x" ; then
533     if test -d /Developer/Extras ; then
534     DEVELOPER_EXTRAS_DIR=/Developer/Extras
535     else
536     DEVELOPER_EXTRAS_DIR=/Developer/Examples
537     fi
538     fi
539     AC_SUBST(DEVELOPER_EXTRAS_DIR)
540     fi
541 iliev 1846
542 schoenebeck 1364 # have we found at least one MIDI input and one audio output driver ?
543     if test "$have_midi_input_driver" = "false"; then
544     echo "No supported MIDI input system found!"
545     echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
546 persson 1652 echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
547 schoenebeck 1364 echo "If you think you have one of those available on your system, make sure you"
548     echo "also have the respective development (header) files installed."
549     exit -1;
550     fi
551     if test "$have_audio_output_driver" = "false"; then
552     echo "No supported audio output system found!"
553 persson 1652 echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
554 schoenebeck 1364 echo "driver at the moment!"
555     exit -1;
556     fi
557    
558    
559    
560     ###########################################################################
561     # Checks for various DLL libraries
562    
563 schoenebeck 504 # Check presence of libgig
564 schoenebeck 1956 libgig_version="3.3.0"
565 schoenebeck 504 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
566     if test "$HAVE_GIG" = "false"; then
567     echo "Required libgig version not found!"
568     echo "You need to have libgig version ${libgig_version} installed!"
569     exit -1;
570 schoenebeck 714 else
571     echo "yes, found libgig $libgig_version"
572 schoenebeck 504 fi
573     AC_SUBST(GIG_CFLAGS)
574     AC_SUBST(GIG_LIBS)
575    
576 iliev 2018 # SF2 Engine (requires libgig)
577 iliev 2012 AC_ARG_ENABLE(sf2-engine,
578     [ --disable-sf2-engine
579     Disable compilation of the SF2 engine.
580 iliev 2018 You need to have libgig installed.],
581 iliev 2012 [config_sf2_engine="$enableval"],
582     [config_sf2_engine="yes"]
583     )
584     HAVE_SF2=0;
585     if test "$config_sf2_engine" = "yes"; then
586 iliev 2018 HAVE_SF2=1
587 iliev 2012 else
588     echo "SF2 engine disabled by configure script parameter"
589     fi
590     AM_CONDITIONAL(HAVE_SF2, test $HAVE_SF2 = 1)
591     AC_DEFINE_UNQUOTED(HAVE_SF2,$HAVE_SF2,[Define to 1 if you want SF2 engine and have libsf2 installed.])
592     config_have_sf2="no"
593     if test $HAVE_SF2 = "1"; then
594     config_have_sf2="yes"
595     fi
596    
597     # Check presence of libsndfile
598     libsndfile_version="1.0"
599     PKG_CHECK_MODULES(SNDFILE, sndfile >= $libsndfile_version, HAVE_SNDFILE=true, HAVE_SNDFILE=false)
600     if test "$HAVE_SNDFILE" = "false"; then
601     echo "Required libsndfile version not found!"
602     echo "You need to have libsndfile version ${libsndfile_version} installed!"
603     exit -1;
604     else
605     echo "yes, found libsndfile $libsndfile_version"
606     fi
607     AC_SUBST(SNDFILE_CFLAGS)
608     AC_SUBST(SNDFILE_LIBS)
609    
610 persson 2119 # Check for Vorbis support in libsndfile
611     linuxsampler_save_CFLAGS=$CFLAGS
612     CFLAGS="$SNDFILE_CFLAGS $CFLAGS"
613     AC_CHECK_DECLS([SF_FORMAT_VORBIS], [], [] ,[[#include <sndfile.h>]])
614 persson 2167
615     # Check for loop functionality in libsndfile
616     AC_CHECK_MEMBERS([SF_INSTRUMENT.loops],,
617     [AC_MSG_WARN([Your version of libsndfile does not support
618     reading of loop information. LinuxSampler will not be able to
619     extract loop information from sample files.])],
620     [#include <sndfile.h>])
621 persson 2119 CFLAGS=$linuxsampler_save_CFLAGS
622    
623 schoenebeck 1364 # Instruments DB feature (requires SQLite 3.3)
624     AC_ARG_ENABLE(instruments-db,
625     [ --disable-instruments-db
626     Disable compilation of the sampler's instruments
627     database feature. You need to have SQLite 3.3
628     or younger installed for this feature.],
629     [config_instruments_db="$enableval"],
630     [config_instruments_db="yes"]
631     )
632     HAVE_SQLITE3=0;
633     if test "$config_instruments_db" = "yes"; then
634     # Check presence of sqlite3
635     sqlite_version="3.3"
636     PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
637     AC_SUBST(SQLITE3_LIBS)
638     AC_SUBST(SQLITE3_CFLAGS)
639     if test $HAVE_SQLITE3 = false; then
640     HAVE_SQLITE3=0
641     config_instruments_db="no"
642     echo "*** Required sqlite version not found!"
643     echo "*** You need to have sqlite version ${sqlite_version} or higher"
644     echo "*** for instruments database support to be enabled."
645     echo "*** Support for instruments DB will be disabled!"
646     else
647     HAVE_SQLITE3=1
648     fi
649 senkov 397 else
650 schoenebeck 1364 echo "Instruments DB feature disabled by configure script parameter"
651 senkov 397 fi
652     AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
653 schoenebeck 1364 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
654 schoenebeck 31
655 schoenebeck 288
656    
657 schoenebeck 554 ###########################################################################
658     # Handle Configuration Options
659    
660     # TODO: should we use AC_ARG_VAR(variable, description) instead?
661    
662 schoenebeck 617 AC_ARG_ENABLE(asm,
663 schoenebeck 1259 [ --disable-asm
664 schoenebeck 738 Enable hand-crafted assembly optimizations
665 schoenebeck 1259 (default=on). LinuxSampler provides CPU specific
666     assembly optimizations. This is currently limited
667     to just enter a fast (denormal) FPU mode on x86
668     platforms. There are currently no synthesis core
669     assembly optimizations anymore since LS 0.4.0],
670 schoenebeck 1360 [config_asm="$enableval"],
671 schoenebeck 1259 [config_asm="yes"]
672 schoenebeck 617 )
673     if test "$config_asm" = "yes"; then
674 schoenebeck 1259 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
675 schoenebeck 617 fi
676    
677 schoenebeck 554 AC_ARG_ENABLE(dev-mode,
678 schoenebeck 1424 [ --enable-dev-mode
679     Enable development mode (default=off). In that mode
680 schoenebeck 554 we do some extra sanity checks here and there.
681     This helps to spot possible problems, but reduces
682     efficiency a bit],
683 schoenebeck 1360 [config_dev_mode="$enableval"],
684 schoenebeck 1424 [config_dev_mode="no"]
685 schoenebeck 554 )
686     if test "$config_dev_mode" = "yes"; then
687     AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
688     fi
689    
690     AC_ARG_ENABLE(debug-level,
691     [ --enable-debug-level
692     Specify verbosity of console messages (default=1).
693     The higher the value, the higher will be verbosity.
694     A value of 0 means no console output at all.
695     There's not really an upper limit but the usual
696     level of all messages is currently somewhere less
697     than 10.],
698     [config_debug_level="${enableval}"],
699     [config_debug_level="1"]
700     )
701     AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
702    
703     AC_ARG_ENABLE(rt-exceptions,
704     [ --enable-rt-exceptions
705     Enable exceptions in the realtime thread
706     (default=no). If this is enabled, exceptions will
707     be thrown on critical errors in the realtime
708     context as well. Otherwise if disabled
709     segmentation faults will be forced by the
710     application on critical errors.],
711 schoenebeck 1360 [config_rt_exceptions="$enableval"],
712 schoenebeck 554 [config_rt_exceptions="no"]
713     )
714     if test "$config_rt_exceptions" = "yes"; then
715     AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
716     fi
717    
718 persson 2185 case "$host" in
719     *-*-darwin*)
720     config_pthread_testcancel=yes
721     ;;
722     *)
723     config_pthread_testcancel=no
724     ;;
725     esac
726    
727 nagata 1649 AC_ARG_ENABLE(pthread-testcancel,
728     [ --enable-pthread-testcancel
729 persson 2185 Enable pthread_testcancel() calls and avoid
730     asynchronous cancel of pthreads (default=yes
731     for Mac targets, no otherwise).],
732 nagata 1649 [config_pthread_testcancel="$enableval"],
733 persson 2185 []
734 nagata 1649 )
735     if test "$config_pthread_testcancel" = "yes"; then
736     AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
737     fi
738    
739 schoenebeck 554 AC_ARG_ENABLE(preload-samples,
740     [ --enable-preload-samples
741     Due to seeking and latency issues with hard drives
742     we have to cache a small part of samples' head in
743     RAM (default=32768). The higher this value the
744     more memory will be occupied for each sample, but
745     the safer this will be in regards of possible
746     droputs. A 'good' value depends on the running
747     system and usage dependant factors.],
748     [config_preload_samples="${enableval}"],
749     [config_preload_samples="32768"]
750     )
751     AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
752    
753     AC_ARG_ENABLE(max-pitch,
754     [ --enable-max-pitch
755     Specify the maximum allowed pitch value in octaves
756     (default=4). To lower memory usage you might want
757     set a smaller value.],
758     [config_max_pitch="${enableval}"],
759     [config_max_pitch="4"]
760     )
761     AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
762    
763     AC_ARG_ENABLE(max-events,
764     [ --enable-max-events
765     Specify the maximum allowed amount of events to be
766     processed per fragment (default=1024).],
767     [config_max_events="${enableval}"],
768     [config_max_events="1024"]
769     )
770     AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
771    
772     AC_ARG_ENABLE(eg-bottom,
773     [ --enable-eg-bottom
774     Bottom limit of envelope generators
775     (default=0.001). Certain kinds of curve types like
776     exponential curves converge against 0 but never
777     reach 0. So we have to define a certain low value
778     after which we should consider all smaller values
779     to be 'almost zero'. The smaller this value, the
780     longer will voices survive in EG's release stage
781     and thus waste voices. If this value is too high
782     will cause click sounds though.],
783     [config_eg_bottom="${enableval}"],
784     [config_eg_bottom="0.001"]
785     )
786     AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
787    
788     AC_ARG_ENABLE(eg-min-release-time,
789     [ --enable-eg-min-release-time
790     Specify the lowest allowed release time in seconds
791     (default=0.0025). This value will also be used to
792     ramp down voices on voice stealing. This value
793     should always be less than the period time of the
794     used audio driver, as in case of voice stealing
795     the killed voice needs to be completely ramped
796     down in the same fragment.],
797     [config_eg_min_release_time="${enableval}"],
798     [config_eg_min_release_time="0.0025"]
799     )
800     AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
801    
802     AC_ARG_ENABLE(refill-streams,
803     [ --enable-refill-streams
804     Number of streams that should be refilled in each
805     disk thread cycle (default=4).],
806     [config_refill_streams="${enableval}"],
807     [config_refill_streams="4"]
808     )
809     AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
810    
811     AC_ARG_ENABLE(stream-min-refill,
812     [ --enable-stream-min-refill
813     Minimum refill size for disk streams (default=1024).
814     The disk thread will go to sleep for a while if no
815     stream had to be refilled more than this value in
816     a disk thread cycle.],
817     [config_stream_min_refill="${enableval}"],
818     [config_stream_min_refill="1024"]
819     )
820     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
821    
822     AC_ARG_ENABLE(stream-max-refill,
823     [ --enable-stream-max-refill
824     Maximum refill size for disk streams
825     (default=65536). The disk thread will refill
826     each stream only by a size of this value per
827     disk thread cycle.],
828     [config_stream_max_refill="${enableval}"],
829     [config_stream_max_refill="65536"]
830     )
831     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
832    
833     AC_ARG_ENABLE(stream-size,
834     [ --enable-stream-size
835     Size of each stream's ring buffer in sample points
836     (default=262144).],
837     [config_stream_size="${enableval}"],
838     [config_stream_size="262144"]
839     )
840     AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
841    
842     AC_ARG_ENABLE(max-streams,
843     [ --enable-max-streams
844 schoenebeck 1800 Initial maximum amount of disk streams
845     (default=90). This value can be changed at
846     runtime. It should always be higher than the
847     maximum amount of voices.],
848 schoenebeck 554 [config_max_streams="${enableval}"],
849     [config_max_streams="90"]
850     )
851 schoenebeck 1800 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
852 schoenebeck 554
853     AC_ARG_ENABLE(max-voices,
854     [ --enable-max-voices
855 schoenebeck 1800 Initial maximum amount of voices (default=64).
856     This value can be changed at runtime. It should
857     always be lower than the maximum amount of disk
858     streams.],
859 schoenebeck 554 [config_max_voices="${enableval}"],
860     [config_max_voices="64"]
861     )
862 schoenebeck 1800 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
863 schoenebeck 554
864 schoenebeck 738 AC_ARG_ENABLE(subfragment-size,
865     [ --enable-subfragment-size
866     Every audio fragment will be splitted into
867     subfragments. Where each subfragment renders
868     audio with constant synthesis parameters. This is
869     done for efficiency reasons. This parameter
870     defines the default size of a subfragment in
871     sample points. A large value means less CPU time
872     whereas a low value means better audio quality
873     (default=32).],
874     [config_subfragment_size="${enableval}"],
875     [config_subfragment_size="32"]
876     )
877     AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
878    
879 schoenebeck 1005 AC_ARG_ENABLE(global-attenuation-default,
880     [ --enable-global-attenuation-default
881 schoenebeck 781 To prevent clipping all samples will be lowered
882 schoenebeck 1005 in amplitude by this given default factor (can
883     be overridden at runtime).
884 schoenebeck 781 (default=0.35)],
885 schoenebeck 1005 [config_global_attenuation_default="${enableval}"],
886     [config_global_attenuation_default="0.35"]
887 schoenebeck 781 )
888 schoenebeck 1005 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
889 schoenebeck 781
890 schoenebeck 554 AC_ARG_ENABLE(voice-steal-algo,
891     [ --enable-voice-steal-algo
892     Voice stealing algorithm to be used. Currently
893     available options:
894     none:
895     Disable voice stealing completely.
896 schoenebeck 563 oldestvoiceonkey (default):
897 schoenebeck 554 Try to kill a voice on the same key first,
898     if no success, proceed with the oldest key.
899 schoenebeck 563 oldestkey:
900 schoenebeck 554 Try to kill a voice from the oldest active
901     key.],
902     [ if test ! "(" "${enableval}" = "none" \
903     -o "${enableval}" = "oldestvoiceonkey" \
904     -o "${enableval}" = "oldestkey" ")" ; then
905     AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
906     else
907     config_voice_steal_algo="${enableval}"
908 schoenebeck 579 fi
909 schoenebeck 554 ],
910 schoenebeck 563 [config_voice_steal_algo="oldestvoiceonkey"]
911 schoenebeck 554 )
912     AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
913    
914     AC_ARG_ENABLE(sysex-buffer-size,
915     [ --enable-sysex-buffer-size
916     System Exclusive Message buffer size in kB
917     (default=2048).],
918     [config_sysex_buffer_size="${enableval}"],
919     [config_sysex_buffer_size="2048"]
920     )
921     AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
922    
923     AC_ARG_ENABLE(force-filter,
924     [ --enable-force-filter
925     If enabled will force filter to be used even if
926     no usage was define in instrument patch files.
927     (default=no).],
928 schoenebeck 1360 [config_force_filter="$enableval"],
929 schoenebeck 554 [config_force_filter="no"]
930     )
931     if test "$config_force_filter" = "yes"; then
932     AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
933     fi
934    
935     AC_ARG_ENABLE(filter-cutoff-min,
936     [ --enable-filter-cutoff-min
937     Minimum filter cutoff frequency in Hz
938     (default=100.0).],
939     [config_filter_cutoff_min="${enableval}"],
940     [config_filter_cutoff_min="100.0"]
941     )
942     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
943    
944     AC_ARG_ENABLE(filter-cutoff-max,
945     [ --enable-filter-cutoff-max
946     Maximum filter cutoff frequency in Hz
947     (default=10000.0).],
948     [config_filter_cutoff_max="${enableval}"],
949     [config_filter_cutoff_max="10000.0"]
950     )
951     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
952    
953     AC_ARG_ENABLE(override-cutoff-ctrl,
954     [ --enable-override-cutoff-ctrl
955     Override filter cutoff MIDI controller (default=no).
956     Note: you have to define the MIDI controller number
957     here, it's not a boolean parameter type! If this
958     option is used, controller number given by
959     instrument patch will be ignored and instead this
960     supplied value will be used.],
961     [config_override_cutoff_ctrl="${enableval}"],
962     [config_override_cutoff_ctrl="no"]
963     )
964     if test ! "$config_override_cutoff_ctrl" = "no"; then
965     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
966     fi
967    
968     AC_ARG_ENABLE(override-resonance-ctrl,
969     [ --enable-override-resonance-ctrl
970     Override filter resonance MIDI controller
971     (default=no). Note: you have to define the MIDI
972     controller number here, it's not a boolean
973     parameter type! If this option is used, controller
974     number given by instrument patch will be ignored
975     and instead this supplied value will be used.],
976     [config_override_resonance_ctrl="${enableval}"],
977     [config_override_resonance_ctrl="no"]
978     )
979     if test ! "$config_override_resonance_ctrl" = "no"; then
980     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
981     fi
982    
983     AC_ARG_ENABLE(override-filter-type,
984     [ --enable-override-filter-type
985     Override filter type (default=no). Options:
986     hp: for highpass
987     bp: for bandpass
988     br: for bandreject
989     lp: for lowpass
990     lpt: for lowpass turbo],
991     [ if test "${enableval}" = "hp" ; then
992     config_override_filter_type="::gig::vcf_type_highpass"
993     elif test "${enableval}" = "bp" ; then
994     config_override_filter_type="::gig::vcf_type_bandpass"
995     elif test "${enableval}" = "br" ; then
996     config_override_filter_type="::gig::vcf_type_bandreject"
997     elif test "${enableval}" = "lp" ; then
998     config_override_filter_type="::gig::vcf_type_lowpass"
999     elif test "${enableval}" = "lpt" ; then
1000     config_override_filter_type="::gig::vcf_type_lowpassturbo"
1001     elif test ! "${enableval}" = "no"; then
1002     AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
1003 schoenebeck 579 fi
1004 schoenebeck 554 ],
1005     [config_override_filter_type="no"]
1006     )
1007     if test ! "$config_override_filter_type" = "no"; then
1008     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
1009     fi
1010    
1011 schoenebeck 563 AC_ARG_ENABLE(gs-checksum,
1012     [ --enable-gs-checksum
1013     Enable Roland General Synth SysEx checksum check
1014     (default=no). If this is enabled, all GS SysEx
1015     messages which do not provide a correct checksum
1016     will be ignored. This is disabled by default as
1017     not all devices honor GS checksums.],
1018 schoenebeck 1360 [config_assert_gs_sysex_checksum="$enableval"],
1019 schoenebeck 563 [config_assert_gs_sysex_checksum="no"]
1020     )
1021     if test "config_assert_gs_sysex_checksum" = "yes"; then
1022     AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
1023     fi
1024    
1025 schoenebeck 829 AC_ARG_ENABLE(portamento-time-min,
1026     [ --enable-portamento-time-min
1027     Minimum Portamento time in seconds
1028     (default=0.1).],
1029     [config_portamento_time_min="${enableval}"],
1030     [config_portamento_time_min="0.1"]
1031     )
1032     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
1033    
1034     AC_ARG_ENABLE(portamento-time-max,
1035     [ --enable-portamento-time-max
1036     Maximum Portamento time in seconds
1037     (default=32).],
1038     [config_portamento_time_max="${enableval}"],
1039     [config_portamento_time_max="32"]
1040     )
1041     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
1042    
1043     AC_ARG_ENABLE(portamento-time-default,
1044     [ --enable-portamento-time-default
1045     Default Portamento time in seconds
1046     (default=1).],
1047     [config_portamento_time_default="${enableval}"],
1048     [config_portamento_time_default="1"]
1049     )
1050     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
1051    
1052 schoenebeck 714 AC_ARG_ENABLE(signed-triang-algo,
1053     [ --enable-signed-triang-algo
1054     Signed triangular wave algorithm to be used (e.g. for LFOs).
1055     Currently available options:
1056     intmath:
1057     Uses integer math without any branch will then be
1058     converted to floating point value for each sample point.
1059     This int->float conversion might hurt on some systems.
1060 senkov 720 intmathabs:
1061     Similar to intmath but uses abs() function.
1062     Depending on compiler and platrofm this could
1063     perform better than integer math as it avoids
1064 schoenebeck 1360 an extra integer multiply instruction.
1065 schoenebeck 714 diharmonic:
1066     The triangular wave will be approximated by adding two
1067     sinusoidials. This solution might especially hurt on
1068     systems with weak floating point unit.
1069     benchmark (default):
1070     This is not an algorithm. Use this option if the
1071     appropriate algorithm should be automatically
1072     chosen by the configure script by performing a
1073     benchmark between the algorithms mentioned above.
1074     This will NOT work for cross compilation!],
1075     [ if test ! "(" "${enableval}" = "intmath" \
1076 senkov 720 -o "${enableval}" = "intmathabs" \
1077 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
1078     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
1079     else
1080     config_signed_triang_algo="${enableval}"
1081     fi
1082     ],
1083     [config_signed_triang_algo="benchmark"]
1084     )
1085 schoenebeck 563
1086 schoenebeck 714 AC_ARG_ENABLE(unsigned-triang-algo,
1087     [ --enable-unsigned-triang-algo
1088     Unsigned triangular wave algorithm to be used (e.g. for LFOs).
1089     Currently available options:
1090     intmath:
1091     Uses integer math without any branch will then be
1092     converted to floating point value for each sample point.
1093     This int->float conversion might hurt on some systems.
1094 senkov 720 intmathabs:
1095     Similar to intmath but uses abs() function.
1096     Depending on compiler and platrofm this could
1097     perform better than integer math as it avoids
1098 schoenebeck 1360 an extra integer multiply instruction.
1099 schoenebeck 714 diharmonic:
1100     The triangular wave will be approximated by adding two
1101     sinusoidials. This solution might especially hurt on
1102     systems with weak floating point unit.
1103     benchmark (default):
1104     This is not an algorithm. Use this option if the
1105     appropriate algorithm should be automatically
1106     chosen by the configure script by performing a
1107     benchmark between the algorithms mentioned above.
1108     This will NOT work for cross compilation!],
1109     [ if test ! "(" "${enableval}" = "intmath" \
1110 senkov 720 -o "${enableval}" = "intmathabs" \
1111 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
1112     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
1113     else
1114     config_unsigned_triang_algo="${enableval}"
1115     fi
1116     ],
1117     [config_unsigned_triang_algo="benchmark"]
1118     )
1119    
1120 iliev 716 AC_ARG_ENABLE(process-muted-channels,
1121     [ --enable-process-muted-channels
1122     Enable processing of muted channels (default=no).
1123     In that mode all MIDI events in the muted channels
1124     will be processed. This will provide information
1125     about the active voices in the muted channels and
1126     will not discard notes, triggered in mute mode,
1127     when the channel is unmuted. But also will reduce
1128     the efficiency.],
1129 schoenebeck 1360 [config_process_muted_channels="$enableval"],
1130 iliev 716 [config_process_muted_channels="no"]
1131     )
1132     if test "$config_process_muted_channels" = "yes"; then
1133     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
1134     fi
1135 schoenebeck 714
1136 schoenebeck 849 AC_ARG_ENABLE(process-all-notes-off,
1137     [ --disable-process-all-notes-off
1138     Disable interpretation of All-Notes-Off MIDI
1139     messages (default=on). By default LS will release
1140     all voices whenever it receives an All-Notes-Off
1141     MIDI message. You can disable this behavior, so
1142     that LS simply ignores such messages.],
1143 schoenebeck 1360 [config_process_all_notes_off="$enableval"],
1144 schoenebeck 849 [config_process_all_notes_off="yes"]
1145     )
1146     if test "$config_process_all_notes_off" = "yes"; then
1147     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
1148     fi
1149    
1150 persson 830 AC_ARG_ENABLE(interpolate-volume,
1151     [ --disable-interpolate-volume
1152     Disable interpolation of volume modulation
1153     (default=on). With this enabled, the volume changes
1154     generated by for example the envelope generator
1155     will be smoother, minimizing the risk for audio
1156     clicks. Disable it to reduce CPU usage.],
1157 schoenebeck 1360 [config_interpolate_volume="$enableval"],
1158 persson 830 [config_interpolate_volume="yes"]
1159     )
1160     if test "$config_interpolate_volume" = "yes"; then
1161     AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
1162     fi
1163 iliev 716
1164 schoenebeck 1762 AC_ARG_ENABLE(master-volume-sysex-by-port,
1165     [ --enable-master-volume-sysex-by-port
1166     Whether global volume sysex message should be
1167     applied globally to the whole sampler or only to
1168     the sampler channels connected to the same MIDI
1169     input port on which the sysex message arrived on.
1170     By default global volume sysex messages apply
1171     globally to the whole sampler, since many MIDI
1172     devices behave that way.],
1173     [config_master_volume_sysex_by_port="$enableval"],
1174     [config_master_volume_sysex_by_port="no"]
1175     )
1176     if test "$config_master_volume_sysex_by_port" = "yes"; then
1177     AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
1178     fi
1179    
1180 schoenebeck 1212 AC_ARG_ENABLE(plugin-dir,
1181     [ --enable-plugin-dir
1182     Directory where the sampler shall look for potential plugins,
1183     that is 3rd party shared libraries that should be loaded by
1184     the sampler on startup. By default the sampler will search
1185     for plugins in the subdirectory "plugins" below its own
1186     library directory.
1187     (i.e. /usr/local/lib/linuxsampler/plugins)],
1188     [config_plugin_dir="${enableval}"],
1189     [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1190     )
1191     AC_SUBST(config_plugin_dir)
1192 persson 830
1193 schoenebeck 1364 AC_ARG_ENABLE(default-instruments-db-location,
1194     [ --enable-default-instruments-db-location
1195     Only when instruments DB feature is enabled: file name
1196     which shall be taken as default location of the
1197     instruments DB file. This location can still be
1198     overridden at runtime with a command line switch.
1199     (default: /var/lib/linuxsampler/instruments.db)],
1200     [config_default_instruments_db_file="${enableval}"],
1201     [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1202     )
1203     AC_DEFINE_UNQUOTED(
1204     CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1205     "$config_default_instruments_db_file",
1206     [Only when instruments DB feature is enabled: default location of the DB file.]
1207     )
1208 schoenebeck 1432 AC_SUBST(config_default_instruments_db_file)
1209 schoenebeck 1212
1210 schoenebeck 1364
1211 schoenebeck 554 ###########################################################################
1212 schoenebeck 714 # Automatic Benchmarks (to detect the best algorithms for the system)
1213    
1214     AC_LANG_SAVE
1215    
1216     if test "$config_signed_triang_algo" = "benchmark"; then
1217     echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1218     AC_LANG_CPLUSPLUS
1219     AC_TRY_RUN([
1220     #define SIGNED 1
1221     #define SILENT 1
1222 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1223 schoenebeck 714 ],
1224     triang_signed=0,
1225     triang_signed=$?,
1226     triang_signed=0
1227     )
1228     if test "$triang_signed" = "2"; then
1229     config_signed_triang_algo="intmath"
1230     echo "integer math"
1231     elif test "$triang_signed" = "3"; then
1232     config_signed_triang_algo="diharmonic"
1233     echo "di harmonics"
1234 senkov 720 elif test "$triang_signed" = "5"; then
1235     config_signed_triang_algo="intmathabs"
1236     echo "integer math using abs()"
1237 schoenebeck 714 else
1238     echo "Benchmark of signed triangular wave algorithms failed!"
1239     echo "Maybe you are doing cross compilation? In that case you have to select"
1240     echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1241     echo "Call './configure --help' for further information or read configure.in."
1242     exit -1;
1243     fi
1244 schoenebeck 1165 else
1245     case "$config_signed_triang_algo" in
1246     intmath)
1247     triang_signed=2 ;;
1248     diharmonic)
1249     triang_signed=3 ;;
1250     intmathabs)
1251     triang_signed=5 ;;
1252     esac
1253 schoenebeck 714 fi
1254 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1255 schoenebeck 714
1256     if test "$config_unsigned_triang_algo" = "benchmark"; then
1257     echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1258     AC_LANG_CPLUSPLUS
1259     AC_TRY_RUN([
1260     #define SIGNED 0
1261     #define SILENT 1
1262 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1263 schoenebeck 714 ],
1264     triang_unsigned=0,
1265     triang_unsigned=$?,
1266     triang_unsigned=0
1267     )
1268     if test "$triang_unsigned" = "2"; then
1269     config_unsigned_triang_algo="intmath"
1270     echo "integer math"
1271     elif test "$triang_unsigned" = "3"; then
1272     config_unsigned_triang_algo="diharmonic"
1273     echo "di harmonics"
1274 senkov 720 elif test "$triang_unsigned" = "5"; then
1275 schoenebeck 726 config_unsigned_triang_algo="intmathabs"
1276 senkov 720 echo "integer math using abs()"
1277 schoenebeck 714 else
1278     echo "Benchmark of unsigned triangular wave algorithms failed!"
1279     echo "Maybe you are doing cross compilation? In that case you have to select"
1280     echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1281     echo "Call './configure --help' for further information or read configure.in."
1282     exit -1;
1283     fi
1284 schoenebeck 1165 else
1285     case "$config_unsigned_triang_algo" in
1286     intmath)
1287     triang_unsigned=2 ;;
1288     diharmonic)
1289     triang_unsigned=3 ;;
1290     intmathabs)
1291     triang_unsigned=5 ;;
1292     esac
1293 schoenebeck 714 fi
1294 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1295 schoenebeck 714
1296     AC_LANG_RESTORE
1297    
1298    
1299     ###########################################################################
1300 schoenebeck 554 # Create Build Files
1301    
1302 schoenebeck 9 AM_CONFIG_HEADER(config.h)
1303 schoenebeck 697 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1304 schoenebeck 9
1305     AC_LANG_CPLUSPLUS
1306 persson 497
1307     # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1308     # this, the dlfcn.h check in am_prog_libtool may fail.
1309     AC_CHECK_HEADER(stdlib.h)
1310    
1311 schoenebeck 654 AC_OUTPUT( \
1312     Makefile \
1313     man/Makefile \
1314     man/linuxsampler.1 \
1315     src/Makefile \
1316 iliev 1161 src/db/Makefile \
1317 schoenebeck 654 src/network/Makefile \
1318     src/engines/Makefile \
1319     src/engines/gig/Makefile \
1320 iliev 2012 src/engines/sf2/Makefile \
1321     src/engines/sfz/Makefile \
1322 schoenebeck 654 src/engines/common/Makefile \
1323 schoenebeck 1722 src/effects/Makefile \
1324 schoenebeck 1321 src/common/Makefile \
1325 schoenebeck 654 src/testcases/Makefile \
1326     src/drivers/Makefile \
1327     src/drivers/audio/Makefile \
1328     src/drivers/midi/Makefile \
1329 schoenebeck 1375 src/plugins/Makefile \
1330 persson 1777 src/hostplugins/Makefile \
1331     src/hostplugins/dssi/Makefile \
1332     src/hostplugins/lv2/Makefile \
1333     src/hostplugins/vst/Makefile \
1334 iliev 1846 src/hostplugins/au/Makefile \
1335 schoenebeck 654 linuxsampler.spec \
1336     debian/Makefile \
1337     Artwork/Makefile \
1338     scripts/Makefile \
1339     osx/Makefile \
1340 schoenebeck 1175 osx/linuxsampler.xcodeproj/Makefile \
1341 schoenebeck 654 Documentation/Makefile \
1342     Documentation/Engines/Makefile \
1343     Documentation/Engines/gig/Makefile \
1344 schoenebeck 697 linuxsampler.pc \
1345     Doxyfile \
1346 schoenebeck 654 )
1347 schoenebeck 554
1348 schoenebeck 1212 # resolve all nested variables in '${config_plugin_dir}'
1349     # (merely for providing a human readable summary below)
1350     while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1351     config_plugin_dir=`eval echo ${config_plugin_dir}`
1352     done
1353 schoenebeck 554
1354 schoenebeck 1212
1355 schoenebeck 554 ###########################################################################
1356     # Output All Configuration Options
1357    
1358     echo ""
1359     echo "#####################################################################"
1360     echo "# LinuxSampler Configuration #"
1361     echo "#-------------------------------------------------------------------#"
1362 schoenebeck 1876 echo "# Release Version: ${LINUXSAMPLER_RELEASE_MAJOR}.${LINUXSAMPLER_RELEASE_MINOR}.${LINUXSAMPLER_RELEASE_BUILD}"
1363     echo "# LSCP Version: ${LSCP_RELEASE_MAJOR}.${LSCP_RELEASE_MINOR}"
1364     echo "#-------------------------------------------------------------------"
1365 schoenebeck 617 echo "# Assembly Optimizations: ${config_asm}"
1366 schoenebeck 554 echo "# Development Mode: ${config_dev_mode}"
1367     echo "# Debug Level: ${config_debug_level}"
1368     echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1369     echo "# Preload Samples: ${config_preload_samples}"
1370     echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1371     echo "# Maximum Events: ${config_max_events}"
1372     echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1373     echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1374     echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1375     echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1376     echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1377     echo "# Stream Size: ${config_stream_size}"
1378 schoenebeck 1800 echo "# Default Maximum Disk Streams: ${config_max_streams}"
1379     echo "# Default Maximum Voices: ${config_max_voices}"
1380 schoenebeck 738 echo "# Default Subfragment Size: ${config_subfragment_size}"
1381 schoenebeck 1005 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1382 schoenebeck 563 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1383 schoenebeck 714 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1384     echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1385 schoenebeck 554 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1386 schoenebeck 829 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1387     echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1388     echo "# Default Portamento Time: ${config_portamento_time_default} s"
1389 schoenebeck 554 echo "# Force Filter Usage: ${config_force_filter}"
1390     echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1391     echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1392     echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1393     echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1394     echo "# Override Filter Type: ${config_override_filter_type}"
1395 schoenebeck 563 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1396 iliev 716 echo "# Process Muted Channels: ${config_process_muted_channels}"
1397 schoenebeck 849 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1398 schoenebeck 1762 echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
1399 persson 830 echo "# Interpolate Volume: ${config_interpolate_volume}"
1400 schoenebeck 1364 echo "# Instruments database support: ${config_instruments_db}"
1401     if test "$config_instruments_db" = "yes"; then
1402     echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1403     fi
1404 schoenebeck 1212 echo "# Plugin Path: ${config_plugin_dir}"
1405 schoenebeck 1876 echo "#-------------------------------------------------------------------"
1406     echo "# MIDI Input Drivers:"
1407     echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack_midi}, CoreMIDI: ${config_have_coremidi}, MME: ${config_have_mme}, MidiShare: ${config_have_midishare}"
1408     echo "#-------------------------------------------------------------------"
1409     echo "# Audio Output Drivers:"
1410     echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack}, ARTS: ${config_have_arts}, CoreAudio: ${config_have_coreaudio}, ASIO: ${config_have_asio}"
1411     echo "#-------------------------------------------------------------------"
1412 iliev 2012 echo "# Sampler Engines:"
1413     echo "# GIG: yes, SF2: ${config_have_sf2}, SFZ: yes"
1414     echo "#-------------------------------------------------------------------"
1415 schoenebeck 2124 echo "# Effect plugin systems for internal effects:"
1416     echo "# LADSPA: yes"
1417     echo "#-------------------------------------------------------------------"
1418 schoenebeck 1876 echo "# Building sampler as plugin for following host standards:"
1419     echo "# DSSI: ${config_have_dssi}, LV2: ${config_have_lv2}, VST: ${config_have_vst}, AU: ${config_have_au}"
1420 schoenebeck 554 echo "#-------------------------------------------------------------------#"
1421     echo "# Read './configure --help' or file 'configure.in' for details. #"
1422     echo "#####################################################################"
1423     echo ""
1424     echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1425     echo ""

  ViewVC Help
Powered by ViewVC