/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Annotation of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 2330 - (hide annotations) (download)
Mon Mar 12 15:14:31 2012 UTC (12 years ago) by schoenebeck
Original Path: linuxsampler/trunk/configure.in
File size: 57660 byte(s)
* Introduced new C++ API method EngineChannel::InstrumentFileName(int index)
  allowing to retrieve the whole list of files used for the loaded
  instrument on an engine channel (a.k.a. part). Some GigaStudio instruments
  for example are splitted over several files like "Foo.gig", "Foo.gx01",
  "Foo.gx02", ...
* Bumped version to 1.0.0.svn18

1 schoenebeck 9 AC_INIT(configure.in)
2 schoenebeck 697
3     #------------------------------------------------------------------------------------
4     # LinuxSampler's / liblinuxsampler's "official" release version:
5    
6 schoenebeck 1956 LINUXSAMPLER_RELEASE_MAJOR=1
7     LINUXSAMPLER_RELEASE_MINOR=0
8 schoenebeck 2330 LINUXSAMPLER_RELEASE_BUILD=0.svn18
9 schoenebeck 697
10     #------------------------------------------------------------------------------------
11     # The following is the libtool / shared library version. This doesn't have to
12     # do anything with the release version. It MUST conform to the following rules:
13     #
14     # 1. Start with version information of `0:0:0' for each libtool library.
15     # 2. Update the version information only immediately before a public release of
16     # your software. More frequent updates are unnecessary, and only guarantee
17     # that the current interface number gets larger faster.
18     # 3. If the library source code has changed at all since the last update, then
19     # increment revision (`c:r:a' becomes `c:r+1:a').
20     # 4. If any interfaces have been added, removed, or changed since the last update,
21     # increment current, and set revision to 0.
22     # 5. If any interfaces have been added since the last public release, then increment
23     # age.
24     # 6. If any interfaces have been removed since the last public release, then set age
25     # to 0.
26    
27 schoenebeck 1956 LIBLINUXSAMPLER_LT_CURRENT=3
28 schoenebeck 697 LIBLINUXSAMPLER_LT_REVISION=0
29 schoenebeck 1956 LIBLINUXSAMPLER_LT_AGE=0
30 schoenebeck 697 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31    
32 schoenebeck 947 #------------------------------------------------------------------------------------
33     # the LSCP specification version this LinuSampler release complies with:
34    
35     LSCP_RELEASE_MAJOR=1
36 schoenebeck 2024 LSCP_RELEASE_MINOR=5
37 schoenebeck 947
38     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40    
41 schoenebeck 1741 AC_PROG_CXX
42 persson 1777 AC_LIBTOOL_WIN32_DLL
43 schoenebeck 697 AM_PROG_LIBTOOL
44    
45     AC_SUBST(SHLIB_VERSION_ARG)
46     AC_SUBST(SHARED_VERSION_INFO)
47    
48 schoenebeck 12 AC_C_BIGENDIAN
49 persson 1895 AC_CANONICAL_HOST
50 schoenebeck 9
51 schoenebeck 1639 PKG_PROG_PKG_CONFIG
52 schoenebeck 275
53 schoenebeck 554 ###########################################################################
54     # General Checks
55 schoenebeck 275
56 persson 1931 AM_CONDITIONAL(CROSS_COMPILING, test $cross_compiling = yes)
57    
58 schoenebeck 510 AC_MSG_CHECKING([whether x86 architecture])
59 schoenebeck 9 def_arch_x86=0
60 persson 1895 case $host_cpu in
61 persson 1794 "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
62 schoenebeck 9 echo "yes"
63     def_arch_x86=1;;
64     *)
65     echo "no";;
66     esac
67     AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
68    
69 schoenebeck 510 # determine the right gcc switch for CPU specific optimizations
70 schoenebeck 829 # (only if the user did not provide one)
71 schoenebeck 510 CXX_CPU_SWITCH=
72 schoenebeck 829 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
73 persson 1895 if test "$def_arch_x86" = 1 -a "$host_cpu" != "x86_64"; then
74     CXX_CPU_SWITCH="-march=$host_cpu"
75 schoenebeck 909 elif test "$target_cpu" = "ppc"; then
76 persson 1895 CXX_CPU_SWITCH="-arch=$host_cpu"
77 schoenebeck 829 fi
78 schoenebeck 510 fi
79     AC_SUBST([CXX_CPU_SWITCH])
80    
81 persson 2197 mac=no
82     linux=no
83     case "$host" in
84     *-*-darwin*)
85     mac=yes
86     ;;
87     *-*-linux*)
88     linux=yes
89     ;;
90     esac
91     AM_CONDITIONAL(LINUX, test "$linux" = yes)
92     AM_CONDITIONAL(MAC, test "$mac" = yes)
93    
94 senoner 1502 # check if we're on MS Windows
95     AC_CHECK_HEADERS(
96     mmsystem.h,
97     have_windows=1,
98 persson 1895 have_windows=0,
99     [#include <windef.h>]
100 senoner 1502 )
101     AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
102    
103 schoenebeck 288 AC_MSG_CHECKING([whether UNIX98 compatible])
104     AC_LANG_SAVE
105     AC_LANG_C
106     AC_TRY_RUN([
107     #ifndef _GNU_SOURCE
108     #define _GNU_SOURCE 1
109     #endif
110     #include <features.h>
111     void main(void) {
112     #if _XOPEN_SOURCE >= 500
113     exit(0); /* UNIX98 compatible */
114     #else
115     exit(-1); /* not UNIX98 compatible */
116     #endif
117     }
118     ],
119     have_unix98="yes",
120     have_unix98="no",
121     have_unix98="no"
122     )
123     AC_LANG_RESTORE
124     AC_MSG_RESULT([$have_unix98])
125 senoner 1502 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
126 schoenebeck 288 if test "x$HAVE_UNIX98" = "x"; then
127     echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
128     echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
129     echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
130     echo "have a UNIX98 compatible system."
131     exit -1;
132     fi
133     fi
134    
135 wylder 822 # check for <features.h>
136     AC_CHECK_HEADERS(features.h)
137 wylder 821
138 schoenebeck 1454 # test for POSIX thread library
139     m4_ifdef([m4_include(m4/pthread.m4)],,
140     [sinclude([m4/pthread.m4])])
141     ACX_PTHREAD
142     LIBS="$PTHREAD_LIBS $LIBS"
143     CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
144     CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
145     CC="$PTHREAD_CC"
146 schoenebeck 852
147 schoenebeck 1454 # check for a bug in NPTL-enabled glibc
148     # (see Gentoo bug report #194076)
149     AC_ARG_ENABLE(nptl-bug-check,
150     [ --disable-nptl-bug-check
151     Disable check for a bug in certain NPTL-enabled
152     glibc versions that caused crashs.],
153     [config_check_nptl_bug="$enableval"],
154     [config_check_nptl_bug="yes"]
155     )
156     if test "$config_check_nptl_bug" = "yes"; then
157     m4_ifdef([m4_include(m4/nptl_bug.m4)],,
158     [sinclude([m4/nptl_bug.m4])])
159     ACX_NPTL_GLIBC_BUG([
160     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
161     echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
162     echo "probably crash due to this. Please report us the system you are"
163     echo "using and/or file a bug report to the bug tracking system of"
164     echo "your distribution."
165     echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
166     echo "well, you can try to circumvent this problem for now by setting"
167     echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
168     echo "should cause this test to pass."
169     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
170     AC_MSG_ERROR([possibly NPTL glibc bug detected])
171     ])
172     else
173     echo "NPTL glibc bug check disabled"
174     fi
175    
176 schoenebeck 1742 # FIXME: this is actually a dependency of libgig, not of LS directly, why
177     # isn't it hidden by libgig?
178     AC_CHECK_HEADERS(uuid/uuid.h)
179     AC_SEARCH_LIBS(uuid_generate, uuid)
180 schoenebeck 1454
181    
182 schoenebeck 1742
183 schoenebeck 852 ###########################################################################
184 schoenebeck 288 # Checks for available audio and MIDI systems / drivers
185     # (we throw an error if there's not at least one system for audio output and MIDI input available)
186 schoenebeck 852
187 schoenebeck 288 have_midi_input_driver="false"
188     have_audio_output_driver="false"
189    
190 schoenebeck 852 # ALSA
191     AC_ARG_ENABLE(alsa-driver,
192     [ --disable-alsa-driver
193     Disable support for the Advanced Linux Sound
194     Architecture (ALSA).],
195 schoenebeck 1360 [config_alsa_driver="$enableval"],
196 schoenebeck 852 [config_alsa_driver="yes"]
197 schoenebeck 18 )
198 schoenebeck 852 have_alsa=0
199     if test "$config_alsa_driver" = "yes"; then
200     AC_CHECK_HEADER(alsa/asoundlib.h,
201     AC_CHECK_LIB(asound, main,
202     have_alsa=1
203     ,
204     have_alsa=0
205     )
206     ,
207     have_alsa=0
208     )
209     if test "$have_alsa" = "1"; then
210     have_midi_input_driver="true"
211     have_audio_output_driver="true";
212     fi
213    
214     echo -n "checking Alsa version... "
215     AC_LANG_SAVE
216     AC_LANG_C
217     AC_TRY_RUN([
218     #include <alsa/asoundlib.h>
219     void main(void) {
220     /* ensure backward compatibility */
221     #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
222     #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
223     #endif
224     exit(SND_LIB_MAJOR);
225     }
226     ],
227     alsa_major=0,
228     alsa_major=$?,
229     alsa_major=0
230     )
231     AC_TRY_RUN([
232     #include <alsa/asoundlib.h>
233     void main(void) {
234     /* ensure backward compatibility */
235     #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
236     #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
237     #endif
238     exit(SND_LIB_MINOR);
239     }
240     ],
241     alsa_minor=0,
242     alsa_minor=$?,
243     alsa_minor=0
244     )
245     AC_TRY_RUN([
246     #include <alsa/asoundlib.h>
247     void main(void) {
248     /* ensure backward compatibility */
249     #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
250     #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
251     #endif
252     exit(SND_LIB_SUBMINOR);
253     }
254     ],
255     alsa_subminor=0,
256     alsa_subminor=$?,
257     alsa_subminor=0
258     )
259     AC_LANG_RESTORE
260     echo "$alsa_major.$alsa_minor.$alsa_subminor";
261     AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
262     AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
263     AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
264     else
265     echo "ALSA support disabled by configure script parameter"
266 schoenebeck 18 fi
267 schoenebeck 291 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
268 schoenebeck 288 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
269 schoenebeck 1876 config_have_alsa="no"
270     if test $have_alsa = "1"; then
271     config_have_alsa="yes"
272     fi
273 schoenebeck 18
274 schoenebeck 852 # JACK
275     AC_ARG_ENABLE(jack-driver,
276     [ --disable-jack-driver
277     Disable support for the Jack Audio Connection Kit
278     (JACK).],
279 schoenebeck 1360 [config_jack_driver="$enableval"],
280 schoenebeck 852 [config_jack_driver="yes"]
281 schoenebeck 18 )
282 schoenebeck 852 have_jack=0
283     if test "$config_jack_driver" = "yes"; then
284     PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
285     if test $have_jack = "1"; then
286     AC_SUBST(JACK_LIBS)
287     AC_SUBST(JACK_CFLAGS)
288 persson 1748 linuxsampler_save_LIBS=$LIBS
289     LIBS="$JACK_LIBS $LIBS"
290     AC_CHECK_FUNCS(jack_client_name_size jack_client_open)
291     LIBS=$linuxsampler_save_LIBS
292 schoenebeck 852 have_audio_output_driver="true";
293     fi
294 schoenebeck 33 else
295 schoenebeck 852 echo "JACK support disabled by configure script parameter"
296 schoenebeck 33 fi
297 schoenebeck 852 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
298     AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
299 schoenebeck 1876 config_have_jack="no"
300     if test $have_jack = "1"; then
301     config_have_jack="yes"
302     fi
303 schoenebeck 31
304 persson 1651 # JACK MIDI
305     have_jack_midi=0
306     if test $have_jack = "1"; then
307 persson 1652 linuxsampler_save_CFLAGS=$CFLAGS
308     linuxsampler_save_LIBS=$LIBS
309     CFLAGS="$JACK_CFLAGS $CFLAGS"
310     LIBS="$JACK_LIBS $LIBS"
311     AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
312     if test $have_jack_midi = "1"; then
313     AC_CHECK_FUNCS(jack_midi_get_event_count)
314     AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
315     jack_midi_clear_buffer(0, 0);
316     ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
317     [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
318     have_midi_input_driver="true"
319     fi
320     CFLAGS=$linuxsampler_save_CFLAGS
321     LIBS=$linuxsampler_save_LIBS
322 persson 1651 fi
323     AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
324     AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
325     [Define to 1 if you have JACK with MIDI support installed.])
326 schoenebeck 1876 config_have_jack_midi="no"
327     if test $have_jack_midi = "1"; then
328     config_have_jack_midi="yes"
329     fi
330 persson 1651
331 schoenebeck 838 # ARTS
332 schoenebeck 852 AC_ARG_ENABLE(arts-driver,
333     [ --disable-arts-driver
334     Disable support for the Analogue Realtime System
335     (aRts).],
336 schoenebeck 1360 [config_arts_driver="$enableval"],
337 schoenebeck 852 [config_arts_driver="yes"]
338     )
339     have_arts=0
340     if test "$config_arts_driver" = "yes"; then
341     m4_ifdef([m4_include(m4/arts.m4)],,
342     [sinclude([m4/arts.m4])])
343     AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
344     if test "$have_arts" = "1"; then
345     have_audio_output_driver="true"
346     fi
347     else
348     echo "ARTS support disabled by configure script parameter"
349 schoenebeck 838 fi
350     AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
351     AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
352 schoenebeck 1876 config_have_arts="no"
353     if test $have_arts = "1"; then
354     config_have_arts="yes"
355     fi
356 schoenebeck 838
357 senoner 1502 # ASIO AUDIO (Win32)
358     AC_ARG_ENABLE(asiosdk-dir,
359     [ --enable-asiosdk-dir
360     Directory where the ASIO SDK is located, this automatically
361     enables the compilation of the ASIO audio output driver.],
362     [config_asiosdk_dir="${enableval}"],
363     [config_asiosdk_dir="."]
364     )
365     AC_SUBST(config_asiosdk_dir)
366    
367     AC_ARG_ENABLE(asio-driver,
368     [ --disable-asio-driver
369     Disable support for the Windows ASIO driver.],
370     [config_asio_driver="$enableval"],
371     [config_asio_driver="yes"]
372     )
373     have_asio=0
374     ASIOSDK_BASEDIR=
375     if test "$config_asio_driver" = "yes"; then
376     asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
377     echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
378     if test -e $asiosdk_headerfile ; then
379     echo yes
380     have_asio=1
381     ASIOSDK_BASEDIR="$config_asiosdk_dir"
382     else
383     echo no
384     have_asio=0
385     fi
386     if test "$have_asio" = "1"; then
387     have_audio_output_driver="true"
388     fi
389     else
390     echo "Windows ASIO support disabled by configure script parameter"
391     fi
392     AC_SUBST(ASIOSDK_BASEDIR)
393     AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
394     AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
395 schoenebeck 1876 config_have_asio="no"
396     if test $have_asio = "1"; then
397     config_have_asio="yes"
398     fi
399 senoner 1502
400 schoenebeck 609 # MidiShare (Linux, OS X, Windows)
401 schoenebeck 852 AC_ARG_ENABLE(midishare-driver,
402     [ --disable-midishare-driver
403     Disable support for the MidiShare system.],
404 schoenebeck 1360 [config_midishare_driver="$enableval"],
405 schoenebeck 852 [config_midishare_driver="yes"]
406 schoenebeck 609 )
407 schoenebeck 852 have_midishare=0
408     if test "$config_midishare_driver" = "yes"; then
409     AC_CHECK_HEADER(MidiShare.h,
410     AC_CHECK_LIB(MidiShare, MidiCountEvs,
411     have_midishare=1,
412     have_midishare=0
413     )
414     ,
415     have_midishare=0
416     )
417     if test "$have_midishare" = "1"; then
418     have_midi_input_driver="true"
419     fi
420     else
421     echo "MidiShare support disabled by configure script parameter"
422 schoenebeck 609 fi
423     AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
424     AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
425 schoenebeck 1876 config_have_midishare="no"
426     if test $have_midishare = "1"; then
427     config_have_midishare="yes"
428     fi
429 schoenebeck 609
430     # CoreMIDI (OS X)
431 schoenebeck 852 AC_ARG_ENABLE(coremidi-driver,
432     [ --disable-coremidi-driver
433     Disable support for the Apple CoreMIDI system.],
434 schoenebeck 1360 [config_coremidi_driver="$enableval"],
435 schoenebeck 852 [config_coremidi_driver="yes"]
436 schoenebeck 609 )
437 schoenebeck 852 have_coremidi=0
438     if test "$config_coremidi_driver" = "yes"; then
439     AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
440     have_coremidi=1,
441     have_coremidi=0
442     )
443     if test "$have_coremidi" = "1"; then
444     have_midi_input_driver="true"
445     fi
446     else
447     echo "CoreMIDI support disabled by configure script parameter"
448 schoenebeck 609 fi
449     AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
450     AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
451 schoenebeck 1876 config_have_coremidi="no"
452     if test $have_coremidi = "1"; then
453     config_have_coremidi="yes"
454     fi
455 schoenebeck 609
456 iliev 1829 # CoreAudio (OS X)
457     AC_ARG_ENABLE(coreaudio-driver,
458     [ --disable-coreaudio-driver
459     Disable support for the Apple CoreAudio system.],
460     [config_coreaudio_driver="$enableval"],
461     [config_coreaudio_driver="yes"]
462     )
463     have_coreaudio=0
464     if test "$config_coreaudio_driver" = "yes"; then
465     AC_CHECK_HEADER(CoreAudio/CoreAudio.h,
466     have_coreaudio=1,
467     have_coreaudio=0
468     )
469     if test "$have_coreaudio" = "1"; then
470     have_audio_output_driver="true"
471     fi
472     else
473     echo "CoreAudio support disabled by configure script parameter"
474     fi
475     AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1")
476     AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.])
477 schoenebeck 1876 config_have_coreaudio="no"
478     if test $have_coreaudio = "1"; then
479     config_have_coreaudio="yes"
480     fi
481 iliev 1829
482 senoner 1502 # MME MIDI (Win32)
483     AC_ARG_ENABLE(mmemidi-driver,
484     [ --disable-mmemidi-driver
485     Disable support for the Windows MME MIDI system.],
486     [config_mmemidi_driver="$enableval"],
487     [config_mmemidi_driver="yes"]
488     )
489     have_mmemidi=0
490     if test "$config_mmemidi_driver" = "yes"; then
491     AC_CHECK_HEADERS(mmsystem.h,
492     have_mmemidi=1,
493     have_mmemidi=0
494     )
495     if test "$have_mmemidi" = "1"; then
496     have_midi_input_driver="true"
497     fi
498     else
499     echo "MME MIDI support disabled by configure script parameter"
500     fi
501     AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
502     AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
503 schoenebeck 1876 config_have_mme="no"
504     if test $have_mmemidi = "1"; then
505     config_have_mme="yes"
506     fi
507 senoner 1502
508 persson 1777 # DSSI
509     AC_CHECK_HEADERS(dssi.h,
510 schoenebeck 1876 config_have_dssi="yes",
511     config_have_dssi="no")
512     AM_CONDITIONAL(HAVE_DSSI, test $config_have_dssi = "yes")
513 persson 1777
514     # LV2
515 schoenebeck 1876 PKG_CHECK_MODULES(LV2, lv2core, config_have_lv2="yes", config_have_lv2="no")
516     if test $config_have_lv2 = "no"; then
517     AC_CHECK_HEADER(lv2.h, config_have_lv2="yes", config_have_lv2="no")
518 persson 1777 fi
519 schoenebeck 1876 AM_CONDITIONAL(HAVE_LV2, test $config_have_lv2 = "yes")
520 persson 1777
521     # VST
522     AC_ARG_ENABLE(vstsdk-dir,
523     [ --enable-vstsdk-dir
524     Directory where the VST SDK is located.
525     This automatically enables the compilation
526     of the VST plugin.],
527     [VSTSDK_DIR="${enableval}"],
528     [VSTSDK_DIR=]
529     )
530     AC_SUBST(VSTSDK_DIR)
531     AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
532 schoenebeck 1876 config_have_vst="no"
533     if test "x$VSTSDK_DIR" != "x"; then
534     config_have_vst="yes"
535     fi
536 persson 1777
537 iliev 1846 # AU
538     AC_CHECK_HEADERS(AudioUnit/AudioUnit.h,
539 schoenebeck 1876 config_have_au="yes",
540     config_have_au="no")
541     AM_CONDITIONAL(HAVE_AU, test $config_have_au = "yes")
542 iliev 1855 AM_CONDITIONAL(HAVE_AUFLAGS, test "$AUFLAGS" != "")
543 persson 1777
544 persson 2183 if test $config_have_au = "yes" ; then
545     if test "x$DEVELOPER_EXTRAS_DIR" = "x" ; then
546     if test -d /Developer/Extras ; then
547     DEVELOPER_EXTRAS_DIR=/Developer/Extras
548     else
549     DEVELOPER_EXTRAS_DIR=/Developer/Examples
550     fi
551     fi
552     AC_SUBST(DEVELOPER_EXTRAS_DIR)
553     fi
554 iliev 1846
555 persson 2203 if test "x$MAC_PLUGIN_INSTALL_DIR" = "x" ; then
556     MAC_PLUGIN_INSTALL_DIR=/Library/Audio/Plug-Ins
557     fi
558     AC_SUBST(MAC_PLUGIN_INSTALL_DIR)
559    
560 schoenebeck 1364 # have we found at least one MIDI input and one audio output driver ?
561     if test "$have_midi_input_driver" = "false"; then
562     echo "No supported MIDI input system found!"
563     echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
564 persson 1652 echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
565 schoenebeck 1364 echo "If you think you have one of those available on your system, make sure you"
566     echo "also have the respective development (header) files installed."
567     exit -1;
568     fi
569     if test "$have_audio_output_driver" = "false"; then
570     echo "No supported audio output system found!"
571 persson 1652 echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
572 schoenebeck 1364 echo "driver at the moment!"
573     exit -1;
574     fi
575    
576    
577    
578     ###########################################################################
579     # Checks for various DLL libraries
580    
581 schoenebeck 504 # Check presence of libgig
582 schoenebeck 1956 libgig_version="3.3.0"
583 schoenebeck 504 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
584     if test "$HAVE_GIG" = "false"; then
585     echo "Required libgig version not found!"
586     echo "You need to have libgig version ${libgig_version} installed!"
587     exit -1;
588 schoenebeck 714 else
589     echo "yes, found libgig $libgig_version"
590 schoenebeck 504 fi
591     AC_SUBST(GIG_CFLAGS)
592     AC_SUBST(GIG_LIBS)
593    
594 iliev 2018 # SF2 Engine (requires libgig)
595 iliev 2012 AC_ARG_ENABLE(sf2-engine,
596     [ --disable-sf2-engine
597     Disable compilation of the SF2 engine.
598 iliev 2018 You need to have libgig installed.],
599 iliev 2012 [config_sf2_engine="$enableval"],
600     [config_sf2_engine="yes"]
601     )
602     HAVE_SF2=0;
603     if test "$config_sf2_engine" = "yes"; then
604 iliev 2018 HAVE_SF2=1
605 iliev 2012 else
606     echo "SF2 engine disabled by configure script parameter"
607     fi
608     AM_CONDITIONAL(HAVE_SF2, test $HAVE_SF2 = 1)
609     AC_DEFINE_UNQUOTED(HAVE_SF2,$HAVE_SF2,[Define to 1 if you want SF2 engine and have libsf2 installed.])
610     config_have_sf2="no"
611     if test $HAVE_SF2 = "1"; then
612     config_have_sf2="yes"
613     fi
614    
615     # Check presence of libsndfile
616     libsndfile_version="1.0"
617     PKG_CHECK_MODULES(SNDFILE, sndfile >= $libsndfile_version, HAVE_SNDFILE=true, HAVE_SNDFILE=false)
618     if test "$HAVE_SNDFILE" = "false"; then
619     echo "Required libsndfile version not found!"
620     echo "You need to have libsndfile version ${libsndfile_version} installed!"
621     exit -1;
622     else
623     echo "yes, found libsndfile $libsndfile_version"
624     fi
625     AC_SUBST(SNDFILE_CFLAGS)
626     AC_SUBST(SNDFILE_LIBS)
627    
628 persson 2119 # Check for Vorbis support in libsndfile
629     linuxsampler_save_CFLAGS=$CFLAGS
630     CFLAGS="$SNDFILE_CFLAGS $CFLAGS"
631     AC_CHECK_DECLS([SF_FORMAT_VORBIS], [], [] ,[[#include <sndfile.h>]])
632 persson 2167
633     # Check for loop functionality in libsndfile
634     AC_CHECK_MEMBERS([SF_INSTRUMENT.loops],,
635     [AC_MSG_WARN([Your version of libsndfile does not support
636     reading of loop information. LinuxSampler will not be able to
637     extract loop information from sample files.])],
638     [#include <sndfile.h>])
639 persson 2119 CFLAGS=$linuxsampler_save_CFLAGS
640    
641 schoenebeck 1364 # Instruments DB feature (requires SQLite 3.3)
642     AC_ARG_ENABLE(instruments-db,
643     [ --disable-instruments-db
644     Disable compilation of the sampler's instruments
645     database feature. You need to have SQLite 3.3
646     or younger installed for this feature.],
647     [config_instruments_db="$enableval"],
648     [config_instruments_db="yes"]
649     )
650     HAVE_SQLITE3=0;
651     if test "$config_instruments_db" = "yes"; then
652     # Check presence of sqlite3
653     sqlite_version="3.3"
654     PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
655     AC_SUBST(SQLITE3_LIBS)
656     AC_SUBST(SQLITE3_CFLAGS)
657     if test $HAVE_SQLITE3 = false; then
658     HAVE_SQLITE3=0
659     config_instruments_db="no"
660     echo "*** Required sqlite version not found!"
661     echo "*** You need to have sqlite version ${sqlite_version} or higher"
662     echo "*** for instruments database support to be enabled."
663     echo "*** Support for instruments DB will be disabled!"
664     else
665     HAVE_SQLITE3=1
666     fi
667 senkov 397 else
668 schoenebeck 1364 echo "Instruments DB feature disabled by configure script parameter"
669 senkov 397 fi
670     AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
671 schoenebeck 1364 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
672 schoenebeck 31
673 schoenebeck 288
674    
675 schoenebeck 554 ###########################################################################
676     # Handle Configuration Options
677    
678     # TODO: should we use AC_ARG_VAR(variable, description) instead?
679    
680 schoenebeck 617 AC_ARG_ENABLE(asm,
681 schoenebeck 1259 [ --disable-asm
682 schoenebeck 738 Enable hand-crafted assembly optimizations
683 schoenebeck 1259 (default=on). LinuxSampler provides CPU specific
684     assembly optimizations. This is currently limited
685     to just enter a fast (denormal) FPU mode on x86
686     platforms. There are currently no synthesis core
687     assembly optimizations anymore since LS 0.4.0],
688 schoenebeck 1360 [config_asm="$enableval"],
689 schoenebeck 1259 [config_asm="yes"]
690 schoenebeck 617 )
691     if test "$config_asm" = "yes"; then
692 schoenebeck 1259 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
693 schoenebeck 617 fi
694    
695 schoenebeck 554 AC_ARG_ENABLE(dev-mode,
696 schoenebeck 1424 [ --enable-dev-mode
697     Enable development mode (default=off). In that mode
698 schoenebeck 554 we do some extra sanity checks here and there.
699     This helps to spot possible problems, but reduces
700     efficiency a bit],
701 schoenebeck 1360 [config_dev_mode="$enableval"],
702 schoenebeck 1424 [config_dev_mode="no"]
703 schoenebeck 554 )
704     if test "$config_dev_mode" = "yes"; then
705     AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
706     fi
707    
708     AC_ARG_ENABLE(debug-level,
709     [ --enable-debug-level
710     Specify verbosity of console messages (default=1).
711     The higher the value, the higher will be verbosity.
712     A value of 0 means no console output at all.
713     There's not really an upper limit but the usual
714     level of all messages is currently somewhere less
715     than 10.],
716     [config_debug_level="${enableval}"],
717     [config_debug_level="1"]
718     )
719     AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
720    
721     AC_ARG_ENABLE(rt-exceptions,
722     [ --enable-rt-exceptions
723     Enable exceptions in the realtime thread
724     (default=no). If this is enabled, exceptions will
725     be thrown on critical errors in the realtime
726     context as well. Otherwise if disabled
727     segmentation faults will be forced by the
728     application on critical errors.],
729 schoenebeck 1360 [config_rt_exceptions="$enableval"],
730 schoenebeck 554 [config_rt_exceptions="no"]
731     )
732     if test "$config_rt_exceptions" = "yes"; then
733     AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
734     fi
735    
736 persson 2197 config_pthread_testcancel="$mac"
737 nagata 1649 AC_ARG_ENABLE(pthread-testcancel,
738     [ --enable-pthread-testcancel
739 persson 2185 Enable pthread_testcancel() calls and avoid
740     asynchronous cancel of pthreads (default=yes
741     for Mac targets, no otherwise).],
742 nagata 1649 [config_pthread_testcancel="$enableval"],
743 persson 2185 []
744 nagata 1649 )
745     if test "$config_pthread_testcancel" = "yes"; then
746     AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
747     fi
748    
749 schoenebeck 554 AC_ARG_ENABLE(preload-samples,
750     [ --enable-preload-samples
751     Due to seeking and latency issues with hard drives
752     we have to cache a small part of samples' head in
753     RAM (default=32768). The higher this value the
754     more memory will be occupied for each sample, but
755     the safer this will be in regards of possible
756     droputs. A 'good' value depends on the running
757     system and usage dependant factors.],
758     [config_preload_samples="${enableval}"],
759     [config_preload_samples="32768"]
760     )
761     AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
762    
763     AC_ARG_ENABLE(max-pitch,
764     [ --enable-max-pitch
765     Specify the maximum allowed pitch value in octaves
766     (default=4). To lower memory usage you might want
767     set a smaller value.],
768     [config_max_pitch="${enableval}"],
769     [config_max_pitch="4"]
770     )
771     AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
772    
773     AC_ARG_ENABLE(max-events,
774     [ --enable-max-events
775     Specify the maximum allowed amount of events to be
776     processed per fragment (default=1024).],
777     [config_max_events="${enableval}"],
778     [config_max_events="1024"]
779     )
780     AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
781    
782     AC_ARG_ENABLE(eg-bottom,
783     [ --enable-eg-bottom
784     Bottom limit of envelope generators
785     (default=0.001). Certain kinds of curve types like
786     exponential curves converge against 0 but never
787     reach 0. So we have to define a certain low value
788     after which we should consider all smaller values
789     to be 'almost zero'. The smaller this value, the
790     longer will voices survive in EG's release stage
791     and thus waste voices. If this value is too high
792     will cause click sounds though.],
793     [config_eg_bottom="${enableval}"],
794     [config_eg_bottom="0.001"]
795     )
796     AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
797    
798     AC_ARG_ENABLE(eg-min-release-time,
799     [ --enable-eg-min-release-time
800     Specify the lowest allowed release time in seconds
801     (default=0.0025). This value will also be used to
802     ramp down voices on voice stealing. This value
803     should always be less than the period time of the
804     used audio driver, as in case of voice stealing
805     the killed voice needs to be completely ramped
806     down in the same fragment.],
807     [config_eg_min_release_time="${enableval}"],
808     [config_eg_min_release_time="0.0025"]
809     )
810     AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
811    
812     AC_ARG_ENABLE(refill-streams,
813     [ --enable-refill-streams
814     Number of streams that should be refilled in each
815     disk thread cycle (default=4).],
816     [config_refill_streams="${enableval}"],
817     [config_refill_streams="4"]
818     )
819     AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
820    
821     AC_ARG_ENABLE(stream-min-refill,
822     [ --enable-stream-min-refill
823     Minimum refill size for disk streams (default=1024).
824     The disk thread will go to sleep for a while if no
825     stream had to be refilled more than this value in
826     a disk thread cycle.],
827     [config_stream_min_refill="${enableval}"],
828     [config_stream_min_refill="1024"]
829     )
830     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
831    
832     AC_ARG_ENABLE(stream-max-refill,
833     [ --enable-stream-max-refill
834     Maximum refill size for disk streams
835     (default=65536). The disk thread will refill
836     each stream only by a size of this value per
837     disk thread cycle.],
838     [config_stream_max_refill="${enableval}"],
839     [config_stream_max_refill="65536"]
840     )
841     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
842    
843     AC_ARG_ENABLE(stream-size,
844     [ --enable-stream-size
845     Size of each stream's ring buffer in sample points
846     (default=262144).],
847     [config_stream_size="${enableval}"],
848     [config_stream_size="262144"]
849     )
850     AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
851    
852     AC_ARG_ENABLE(max-streams,
853     [ --enable-max-streams
854 schoenebeck 1800 Initial maximum amount of disk streams
855     (default=90). This value can be changed at
856     runtime. It should always be higher than the
857     maximum amount of voices.],
858 schoenebeck 554 [config_max_streams="${enableval}"],
859     [config_max_streams="90"]
860     )
861 schoenebeck 1800 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
862 schoenebeck 554
863     AC_ARG_ENABLE(max-voices,
864     [ --enable-max-voices
865 schoenebeck 1800 Initial maximum amount of voices (default=64).
866     This value can be changed at runtime. It should
867     always be lower than the maximum amount of disk
868     streams.],
869 schoenebeck 554 [config_max_voices="${enableval}"],
870     [config_max_voices="64"]
871     )
872 schoenebeck 1800 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
873 schoenebeck 554
874 schoenebeck 738 AC_ARG_ENABLE(subfragment-size,
875     [ --enable-subfragment-size
876     Every audio fragment will be splitted into
877     subfragments. Where each subfragment renders
878     audio with constant synthesis parameters. This is
879     done for efficiency reasons. This parameter
880     defines the default size of a subfragment in
881     sample points. A large value means less CPU time
882     whereas a low value means better audio quality
883     (default=32).],
884     [config_subfragment_size="${enableval}"],
885     [config_subfragment_size="32"]
886     )
887     AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
888    
889 schoenebeck 1005 AC_ARG_ENABLE(global-attenuation-default,
890     [ --enable-global-attenuation-default
891 schoenebeck 781 To prevent clipping all samples will be lowered
892 schoenebeck 1005 in amplitude by this given default factor (can
893     be overridden at runtime).
894 schoenebeck 781 (default=0.35)],
895 schoenebeck 1005 [config_global_attenuation_default="${enableval}"],
896     [config_global_attenuation_default="0.35"]
897 schoenebeck 781 )
898 schoenebeck 1005 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
899 schoenebeck 781
900 schoenebeck 554 AC_ARG_ENABLE(voice-steal-algo,
901     [ --enable-voice-steal-algo
902     Voice stealing algorithm to be used. Currently
903     available options:
904     none:
905     Disable voice stealing completely.
906 schoenebeck 563 oldestvoiceonkey (default):
907 schoenebeck 554 Try to kill a voice on the same key first,
908     if no success, proceed with the oldest key.
909 schoenebeck 563 oldestkey:
910 schoenebeck 554 Try to kill a voice from the oldest active
911     key.],
912     [ if test ! "(" "${enableval}" = "none" \
913     -o "${enableval}" = "oldestvoiceonkey" \
914     -o "${enableval}" = "oldestkey" ")" ; then
915     AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
916     else
917     config_voice_steal_algo="${enableval}"
918 schoenebeck 579 fi
919 schoenebeck 554 ],
920 schoenebeck 563 [config_voice_steal_algo="oldestvoiceonkey"]
921 schoenebeck 554 )
922     AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
923    
924     AC_ARG_ENABLE(sysex-buffer-size,
925     [ --enable-sysex-buffer-size
926     System Exclusive Message buffer size in kB
927     (default=2048).],
928     [config_sysex_buffer_size="${enableval}"],
929     [config_sysex_buffer_size="2048"]
930     )
931     AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
932    
933     AC_ARG_ENABLE(force-filter,
934     [ --enable-force-filter
935     If enabled will force filter to be used even if
936     no usage was define in instrument patch files.
937     (default=no).],
938 schoenebeck 1360 [config_force_filter="$enableval"],
939 schoenebeck 554 [config_force_filter="no"]
940     )
941     if test "$config_force_filter" = "yes"; then
942     AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
943     fi
944    
945     AC_ARG_ENABLE(filter-cutoff-min,
946     [ --enable-filter-cutoff-min
947     Minimum filter cutoff frequency in Hz
948     (default=100.0).],
949     [config_filter_cutoff_min="${enableval}"],
950     [config_filter_cutoff_min="100.0"]
951     )
952     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
953    
954     AC_ARG_ENABLE(filter-cutoff-max,
955     [ --enable-filter-cutoff-max
956     Maximum filter cutoff frequency in Hz
957     (default=10000.0).],
958     [config_filter_cutoff_max="${enableval}"],
959     [config_filter_cutoff_max="10000.0"]
960     )
961     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
962    
963     AC_ARG_ENABLE(override-cutoff-ctrl,
964     [ --enable-override-cutoff-ctrl
965     Override filter cutoff MIDI controller (default=no).
966     Note: you have to define the MIDI controller number
967     here, it's not a boolean parameter type! If this
968     option is used, controller number given by
969     instrument patch will be ignored and instead this
970     supplied value will be used.],
971     [config_override_cutoff_ctrl="${enableval}"],
972     [config_override_cutoff_ctrl="no"]
973     )
974     if test ! "$config_override_cutoff_ctrl" = "no"; then
975     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
976     fi
977    
978     AC_ARG_ENABLE(override-resonance-ctrl,
979     [ --enable-override-resonance-ctrl
980     Override filter resonance MIDI controller
981     (default=no). Note: you have to define the MIDI
982     controller number here, it's not a boolean
983     parameter type! If this option is used, controller
984     number given by instrument patch will be ignored
985     and instead this supplied value will be used.],
986     [config_override_resonance_ctrl="${enableval}"],
987     [config_override_resonance_ctrl="no"]
988     )
989     if test ! "$config_override_resonance_ctrl" = "no"; then
990     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
991     fi
992    
993     AC_ARG_ENABLE(override-filter-type,
994     [ --enable-override-filter-type
995     Override filter type (default=no). Options:
996     hp: for highpass
997     bp: for bandpass
998     br: for bandreject
999     lp: for lowpass
1000     lpt: for lowpass turbo],
1001     [ if test "${enableval}" = "hp" ; then
1002     config_override_filter_type="::gig::vcf_type_highpass"
1003     elif test "${enableval}" = "bp" ; then
1004     config_override_filter_type="::gig::vcf_type_bandpass"
1005     elif test "${enableval}" = "br" ; then
1006     config_override_filter_type="::gig::vcf_type_bandreject"
1007     elif test "${enableval}" = "lp" ; then
1008     config_override_filter_type="::gig::vcf_type_lowpass"
1009     elif test "${enableval}" = "lpt" ; then
1010     config_override_filter_type="::gig::vcf_type_lowpassturbo"
1011     elif test ! "${enableval}" = "no"; then
1012     AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
1013 schoenebeck 579 fi
1014 schoenebeck 554 ],
1015     [config_override_filter_type="no"]
1016     )
1017     if test ! "$config_override_filter_type" = "no"; then
1018     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
1019     fi
1020    
1021 schoenebeck 563 AC_ARG_ENABLE(gs-checksum,
1022     [ --enable-gs-checksum
1023     Enable Roland General Synth SysEx checksum check
1024     (default=no). If this is enabled, all GS SysEx
1025     messages which do not provide a correct checksum
1026     will be ignored. This is disabled by default as
1027     not all devices honor GS checksums.],
1028 schoenebeck 1360 [config_assert_gs_sysex_checksum="$enableval"],
1029 schoenebeck 563 [config_assert_gs_sysex_checksum="no"]
1030     )
1031     if test "config_assert_gs_sysex_checksum" = "yes"; then
1032     AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
1033     fi
1034    
1035 schoenebeck 829 AC_ARG_ENABLE(portamento-time-min,
1036     [ --enable-portamento-time-min
1037     Minimum Portamento time in seconds
1038     (default=0.1).],
1039     [config_portamento_time_min="${enableval}"],
1040     [config_portamento_time_min="0.1"]
1041     )
1042     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
1043    
1044     AC_ARG_ENABLE(portamento-time-max,
1045     [ --enable-portamento-time-max
1046     Maximum Portamento time in seconds
1047     (default=32).],
1048     [config_portamento_time_max="${enableval}"],
1049     [config_portamento_time_max="32"]
1050     )
1051     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
1052    
1053     AC_ARG_ENABLE(portamento-time-default,
1054     [ --enable-portamento-time-default
1055     Default Portamento time in seconds
1056     (default=1).],
1057     [config_portamento_time_default="${enableval}"],
1058     [config_portamento_time_default="1"]
1059     )
1060     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
1061    
1062 schoenebeck 714 AC_ARG_ENABLE(signed-triang-algo,
1063     [ --enable-signed-triang-algo
1064     Signed triangular wave algorithm to be used (e.g. for LFOs).
1065     Currently available options:
1066     intmath:
1067     Uses integer math without any branch will then be
1068     converted to floating point value for each sample point.
1069     This int->float conversion might hurt on some systems.
1070 senkov 720 intmathabs:
1071     Similar to intmath but uses abs() function.
1072     Depending on compiler and platrofm this could
1073     perform better than integer math as it avoids
1074 schoenebeck 1360 an extra integer multiply instruction.
1075 schoenebeck 714 diharmonic:
1076     The triangular wave will be approximated by adding two
1077     sinusoidials. This solution might especially hurt on
1078     systems with weak floating point unit.
1079     benchmark (default):
1080     This is not an algorithm. Use this option if the
1081     appropriate algorithm should be automatically
1082     chosen by the configure script by performing a
1083     benchmark between the algorithms mentioned above.
1084     This will NOT work for cross compilation!],
1085     [ if test ! "(" "${enableval}" = "intmath" \
1086 senkov 720 -o "${enableval}" = "intmathabs" \
1087 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
1088     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
1089     else
1090     config_signed_triang_algo="${enableval}"
1091     fi
1092     ],
1093     [config_signed_triang_algo="benchmark"]
1094     )
1095 schoenebeck 563
1096 schoenebeck 714 AC_ARG_ENABLE(unsigned-triang-algo,
1097     [ --enable-unsigned-triang-algo
1098     Unsigned triangular wave algorithm to be used (e.g. for LFOs).
1099     Currently available options:
1100     intmath:
1101     Uses integer math without any branch will then be
1102     converted to floating point value for each sample point.
1103     This int->float conversion might hurt on some systems.
1104 senkov 720 intmathabs:
1105     Similar to intmath but uses abs() function.
1106     Depending on compiler and platrofm this could
1107     perform better than integer math as it avoids
1108 schoenebeck 1360 an extra integer multiply instruction.
1109 schoenebeck 714 diharmonic:
1110     The triangular wave will be approximated by adding two
1111     sinusoidials. This solution might especially hurt on
1112     systems with weak floating point unit.
1113     benchmark (default):
1114     This is not an algorithm. Use this option if the
1115     appropriate algorithm should be automatically
1116     chosen by the configure script by performing a
1117     benchmark between the algorithms mentioned above.
1118     This will NOT work for cross compilation!],
1119     [ if test ! "(" "${enableval}" = "intmath" \
1120 senkov 720 -o "${enableval}" = "intmathabs" \
1121 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
1122     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
1123     else
1124     config_unsigned_triang_algo="${enableval}"
1125     fi
1126     ],
1127     [config_unsigned_triang_algo="benchmark"]
1128     )
1129    
1130 iliev 716 AC_ARG_ENABLE(process-muted-channels,
1131     [ --enable-process-muted-channels
1132     Enable processing of muted channels (default=no).
1133     In that mode all MIDI events in the muted channels
1134     will be processed. This will provide information
1135     about the active voices in the muted channels and
1136     will not discard notes, triggered in mute mode,
1137     when the channel is unmuted. But also will reduce
1138     the efficiency.],
1139 schoenebeck 1360 [config_process_muted_channels="$enableval"],
1140 iliev 716 [config_process_muted_channels="no"]
1141     )
1142     if test "$config_process_muted_channels" = "yes"; then
1143     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
1144     fi
1145 schoenebeck 714
1146 schoenebeck 849 AC_ARG_ENABLE(process-all-notes-off,
1147     [ --disable-process-all-notes-off
1148     Disable interpretation of All-Notes-Off MIDI
1149     messages (default=on). By default LS will release
1150     all voices whenever it receives an All-Notes-Off
1151     MIDI message. You can disable this behavior, so
1152     that LS simply ignores such messages.],
1153 schoenebeck 1360 [config_process_all_notes_off="$enableval"],
1154 schoenebeck 849 [config_process_all_notes_off="yes"]
1155     )
1156     if test "$config_process_all_notes_off" = "yes"; then
1157     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
1158     fi
1159    
1160 persson 830 AC_ARG_ENABLE(interpolate-volume,
1161     [ --disable-interpolate-volume
1162     Disable interpolation of volume modulation
1163     (default=on). With this enabled, the volume changes
1164     generated by for example the envelope generator
1165     will be smoother, minimizing the risk for audio
1166     clicks. Disable it to reduce CPU usage.],
1167 schoenebeck 1360 [config_interpolate_volume="$enableval"],
1168 persson 830 [config_interpolate_volume="yes"]
1169     )
1170     if test "$config_interpolate_volume" = "yes"; then
1171     AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
1172     fi
1173 iliev 716
1174 schoenebeck 1762 AC_ARG_ENABLE(master-volume-sysex-by-port,
1175     [ --enable-master-volume-sysex-by-port
1176     Whether global volume sysex message should be
1177     applied globally to the whole sampler or only to
1178     the sampler channels connected to the same MIDI
1179     input port on which the sysex message arrived on.
1180     By default global volume sysex messages apply
1181     globally to the whole sampler, since many MIDI
1182     devices behave that way.],
1183     [config_master_volume_sysex_by_port="$enableval"],
1184     [config_master_volume_sysex_by_port="no"]
1185     )
1186     if test "$config_master_volume_sysex_by_port" = "yes"; then
1187     AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
1188     fi
1189    
1190 schoenebeck 1212 AC_ARG_ENABLE(plugin-dir,
1191     [ --enable-plugin-dir
1192     Directory where the sampler shall look for potential plugins,
1193     that is 3rd party shared libraries that should be loaded by
1194     the sampler on startup. By default the sampler will search
1195     for plugins in the subdirectory "plugins" below its own
1196     library directory.
1197     (i.e. /usr/local/lib/linuxsampler/plugins)],
1198     [config_plugin_dir="${enableval}"],
1199     [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1200     )
1201     AC_SUBST(config_plugin_dir)
1202 persson 830
1203 schoenebeck 1364 AC_ARG_ENABLE(default-instruments-db-location,
1204     [ --enable-default-instruments-db-location
1205     Only when instruments DB feature is enabled: file name
1206     which shall be taken as default location of the
1207     instruments DB file. This location can still be
1208     overridden at runtime with a command line switch.
1209     (default: /var/lib/linuxsampler/instruments.db)],
1210     [config_default_instruments_db_file="${enableval}"],
1211     [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1212     )
1213     AC_DEFINE_UNQUOTED(
1214     CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1215     "$config_default_instruments_db_file",
1216     [Only when instruments DB feature is enabled: default location of the DB file.]
1217     )
1218 schoenebeck 1432 AC_SUBST(config_default_instruments_db_file)
1219 schoenebeck 1212
1220 schoenebeck 1364
1221 schoenebeck 554 ###########################################################################
1222 schoenebeck 714 # Automatic Benchmarks (to detect the best algorithms for the system)
1223    
1224     AC_LANG_SAVE
1225    
1226     if test "$config_signed_triang_algo" = "benchmark"; then
1227     echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1228     AC_LANG_CPLUSPLUS
1229     AC_TRY_RUN([
1230     #define SIGNED 1
1231     #define SILENT 1
1232 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1233 schoenebeck 714 ],
1234     triang_signed=0,
1235     triang_signed=$?,
1236     triang_signed=0
1237     )
1238     if test "$triang_signed" = "2"; then
1239     config_signed_triang_algo="intmath"
1240     echo "integer math"
1241     elif test "$triang_signed" = "3"; then
1242     config_signed_triang_algo="diharmonic"
1243     echo "di harmonics"
1244 senkov 720 elif test "$triang_signed" = "5"; then
1245     config_signed_triang_algo="intmathabs"
1246     echo "integer math using abs()"
1247 schoenebeck 714 else
1248     echo "Benchmark of signed triangular wave algorithms failed!"
1249     echo "Maybe you are doing cross compilation? In that case you have to select"
1250     echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1251     echo "Call './configure --help' for further information or read configure.in."
1252     exit -1;
1253     fi
1254 schoenebeck 1165 else
1255     case "$config_signed_triang_algo" in
1256     intmath)
1257     triang_signed=2 ;;
1258     diharmonic)
1259     triang_signed=3 ;;
1260     intmathabs)
1261     triang_signed=5 ;;
1262     esac
1263 schoenebeck 714 fi
1264 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1265 schoenebeck 714
1266     if test "$config_unsigned_triang_algo" = "benchmark"; then
1267     echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1268     AC_LANG_CPLUSPLUS
1269     AC_TRY_RUN([
1270     #define SIGNED 0
1271     #define SILENT 1
1272 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1273 schoenebeck 714 ],
1274     triang_unsigned=0,
1275     triang_unsigned=$?,
1276     triang_unsigned=0
1277     )
1278     if test "$triang_unsigned" = "2"; then
1279     config_unsigned_triang_algo="intmath"
1280     echo "integer math"
1281     elif test "$triang_unsigned" = "3"; then
1282     config_unsigned_triang_algo="diharmonic"
1283     echo "di harmonics"
1284 senkov 720 elif test "$triang_unsigned" = "5"; then
1285 schoenebeck 726 config_unsigned_triang_algo="intmathabs"
1286 senkov 720 echo "integer math using abs()"
1287 schoenebeck 714 else
1288     echo "Benchmark of unsigned triangular wave algorithms failed!"
1289     echo "Maybe you are doing cross compilation? In that case you have to select"
1290     echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1291     echo "Call './configure --help' for further information or read configure.in."
1292     exit -1;
1293     fi
1294 schoenebeck 1165 else
1295     case "$config_unsigned_triang_algo" in
1296     intmath)
1297     triang_unsigned=2 ;;
1298     diharmonic)
1299     triang_unsigned=3 ;;
1300     intmathabs)
1301     triang_unsigned=5 ;;
1302     esac
1303 schoenebeck 714 fi
1304 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1305 schoenebeck 714
1306     AC_LANG_RESTORE
1307    
1308    
1309     ###########################################################################
1310 schoenebeck 554 # Create Build Files
1311    
1312 schoenebeck 9 AM_CONFIG_HEADER(config.h)
1313 schoenebeck 697 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1314 schoenebeck 9
1315     AC_LANG_CPLUSPLUS
1316 persson 497
1317     # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1318     # this, the dlfcn.h check in am_prog_libtool may fail.
1319     AC_CHECK_HEADER(stdlib.h)
1320    
1321 schoenebeck 654 AC_OUTPUT( \
1322     Makefile \
1323     man/Makefile \
1324     man/linuxsampler.1 \
1325     src/Makefile \
1326 iliev 1161 src/db/Makefile \
1327 schoenebeck 654 src/network/Makefile \
1328     src/engines/Makefile \
1329     src/engines/gig/Makefile \
1330 iliev 2012 src/engines/sf2/Makefile \
1331     src/engines/sfz/Makefile \
1332 schoenebeck 654 src/engines/common/Makefile \
1333 schoenebeck 1722 src/effects/Makefile \
1334 schoenebeck 1321 src/common/Makefile \
1335 schoenebeck 654 src/testcases/Makefile \
1336     src/drivers/Makefile \
1337     src/drivers/audio/Makefile \
1338     src/drivers/midi/Makefile \
1339 schoenebeck 1375 src/plugins/Makefile \
1340 persson 1777 src/hostplugins/Makefile \
1341     src/hostplugins/dssi/Makefile \
1342     src/hostplugins/lv2/Makefile \
1343     src/hostplugins/vst/Makefile \
1344 iliev 1846 src/hostplugins/au/Makefile \
1345 schoenebeck 654 linuxsampler.spec \
1346     debian/Makefile \
1347     Artwork/Makefile \
1348     scripts/Makefile \
1349     osx/Makefile \
1350 schoenebeck 1175 osx/linuxsampler.xcodeproj/Makefile \
1351 schoenebeck 654 Documentation/Makefile \
1352     Documentation/Engines/Makefile \
1353     Documentation/Engines/gig/Makefile \
1354 schoenebeck 697 linuxsampler.pc \
1355     Doxyfile \
1356 schoenebeck 654 )
1357 schoenebeck 554
1358 schoenebeck 1212 # resolve all nested variables in '${config_plugin_dir}'
1359     # (merely for providing a human readable summary below)
1360     while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1361     config_plugin_dir=`eval echo ${config_plugin_dir}`
1362     done
1363 schoenebeck 554
1364 schoenebeck 1212
1365 schoenebeck 554 ###########################################################################
1366     # Output All Configuration Options
1367    
1368     echo ""
1369     echo "#####################################################################"
1370     echo "# LinuxSampler Configuration #"
1371     echo "#-------------------------------------------------------------------#"
1372 schoenebeck 1876 echo "# Release Version: ${LINUXSAMPLER_RELEASE_MAJOR}.${LINUXSAMPLER_RELEASE_MINOR}.${LINUXSAMPLER_RELEASE_BUILD}"
1373     echo "# LSCP Version: ${LSCP_RELEASE_MAJOR}.${LSCP_RELEASE_MINOR}"
1374     echo "#-------------------------------------------------------------------"
1375 schoenebeck 617 echo "# Assembly Optimizations: ${config_asm}"
1376 schoenebeck 554 echo "# Development Mode: ${config_dev_mode}"
1377     echo "# Debug Level: ${config_debug_level}"
1378     echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1379     echo "# Preload Samples: ${config_preload_samples}"
1380     echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1381     echo "# Maximum Events: ${config_max_events}"
1382     echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1383     echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1384     echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1385     echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1386     echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1387     echo "# Stream Size: ${config_stream_size}"
1388 schoenebeck 1800 echo "# Default Maximum Disk Streams: ${config_max_streams}"
1389     echo "# Default Maximum Voices: ${config_max_voices}"
1390 schoenebeck 738 echo "# Default Subfragment Size: ${config_subfragment_size}"
1391 schoenebeck 1005 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1392 schoenebeck 563 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1393 schoenebeck 714 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1394     echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1395 schoenebeck 554 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1396 schoenebeck 829 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1397     echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1398     echo "# Default Portamento Time: ${config_portamento_time_default} s"
1399 schoenebeck 554 echo "# Force Filter Usage: ${config_force_filter}"
1400     echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1401     echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1402     echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1403     echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1404     echo "# Override Filter Type: ${config_override_filter_type}"
1405 schoenebeck 563 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1406 iliev 716 echo "# Process Muted Channels: ${config_process_muted_channels}"
1407 schoenebeck 849 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1408 schoenebeck 1762 echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
1409 persson 830 echo "# Interpolate Volume: ${config_interpolate_volume}"
1410 schoenebeck 1364 echo "# Instruments database support: ${config_instruments_db}"
1411     if test "$config_instruments_db" = "yes"; then
1412     echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1413     fi
1414 schoenebeck 1212 echo "# Plugin Path: ${config_plugin_dir}"
1415 schoenebeck 1876 echo "#-------------------------------------------------------------------"
1416     echo "# MIDI Input Drivers:"
1417     echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack_midi}, CoreMIDI: ${config_have_coremidi}, MME: ${config_have_mme}, MidiShare: ${config_have_midishare}"
1418     echo "#-------------------------------------------------------------------"
1419     echo "# Audio Output Drivers:"
1420     echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack}, ARTS: ${config_have_arts}, CoreAudio: ${config_have_coreaudio}, ASIO: ${config_have_asio}"
1421     echo "#-------------------------------------------------------------------"
1422 iliev 2012 echo "# Sampler Engines:"
1423     echo "# GIG: yes, SF2: ${config_have_sf2}, SFZ: yes"
1424     echo "#-------------------------------------------------------------------"
1425 schoenebeck 2124 echo "# Effect plugin systems for internal effects:"
1426     echo "# LADSPA: yes"
1427     echo "#-------------------------------------------------------------------"
1428 schoenebeck 1876 echo "# Building sampler as plugin for following host standards:"
1429     echo "# DSSI: ${config_have_dssi}, LV2: ${config_have_lv2}, VST: ${config_have_vst}, AU: ${config_have_au}"
1430 schoenebeck 554 echo "#-------------------------------------------------------------------#"
1431     echo "# Read './configure --help' or file 'configure.in' for details. #"
1432     echo "#####################################################################"
1433     echo ""
1434     echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1435     echo ""

  ViewVC Help
Powered by ViewVC