/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Annotation of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 2343 - (hide annotations) (download)
Sun Apr 29 16:14:45 2012 UTC (11 years, 10 months ago) by persson
Original Path: linuxsampler/trunk/configure.in
File size: 57800 byte(s)
* fixed configure script error with old autoconf versions
* LV2: use the new lv2 package if present
* lsatomic.h: use gcc provided atomic functions if building with gcc
  4.7 and C++11
* added comments in lsatomic.h

1 schoenebeck 9 AC_INIT(configure.in)
2 schoenebeck 697
3     #------------------------------------------------------------------------------------
4     # LinuxSampler's / liblinuxsampler's "official" release version:
5    
6 schoenebeck 1956 LINUXSAMPLER_RELEASE_MAJOR=1
7     LINUXSAMPLER_RELEASE_MINOR=0
8 schoenebeck 2330 LINUXSAMPLER_RELEASE_BUILD=0.svn18
9 schoenebeck 697
10     #------------------------------------------------------------------------------------
11     # The following is the libtool / shared library version. This doesn't have to
12     # do anything with the release version. It MUST conform to the following rules:
13     #
14     # 1. Start with version information of `0:0:0' for each libtool library.
15     # 2. Update the version information only immediately before a public release of
16     # your software. More frequent updates are unnecessary, and only guarantee
17     # that the current interface number gets larger faster.
18     # 3. If the library source code has changed at all since the last update, then
19     # increment revision (`c:r:a' becomes `c:r+1:a').
20     # 4. If any interfaces have been added, removed, or changed since the last update,
21     # increment current, and set revision to 0.
22     # 5. If any interfaces have been added since the last public release, then increment
23     # age.
24     # 6. If any interfaces have been removed since the last public release, then set age
25     # to 0.
26    
27 schoenebeck 1956 LIBLINUXSAMPLER_LT_CURRENT=3
28 schoenebeck 697 LIBLINUXSAMPLER_LT_REVISION=0
29 schoenebeck 1956 LIBLINUXSAMPLER_LT_AGE=0
30 schoenebeck 697 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31    
32 schoenebeck 947 #------------------------------------------------------------------------------------
33     # the LSCP specification version this LinuSampler release complies with:
34    
35     LSCP_RELEASE_MAJOR=1
36 schoenebeck 2024 LSCP_RELEASE_MINOR=5
37 schoenebeck 947
38     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40    
41 schoenebeck 1741 AC_PROG_CXX
42 persson 1777 AC_LIBTOOL_WIN32_DLL
43 schoenebeck 697 AM_PROG_LIBTOOL
44    
45     AC_SUBST(SHLIB_VERSION_ARG)
46     AC_SUBST(SHARED_VERSION_INFO)
47    
48 schoenebeck 12 AC_C_BIGENDIAN
49 persson 1895 AC_CANONICAL_HOST
50 schoenebeck 9
51 schoenebeck 1639 PKG_PROG_PKG_CONFIG
52 schoenebeck 275
53 schoenebeck 554 ###########################################################################
54     # General Checks
55 schoenebeck 275
56 persson 1931 AM_CONDITIONAL(CROSS_COMPILING, test $cross_compiling = yes)
57    
58 schoenebeck 510 AC_MSG_CHECKING([whether x86 architecture])
59 schoenebeck 9 def_arch_x86=0
60 persson 1895 case $host_cpu in
61 persson 1794 "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
62 schoenebeck 9 echo "yes"
63     def_arch_x86=1;;
64     *)
65     echo "no";;
66     esac
67     AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
68    
69 schoenebeck 510 # determine the right gcc switch for CPU specific optimizations
70 schoenebeck 829 # (only if the user did not provide one)
71 schoenebeck 510 CXX_CPU_SWITCH=
72 schoenebeck 829 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
73 persson 1895 if test "$def_arch_x86" = 1 -a "$host_cpu" != "x86_64"; then
74     CXX_CPU_SWITCH="-march=$host_cpu"
75 schoenebeck 909 elif test "$target_cpu" = "ppc"; then
76 persson 1895 CXX_CPU_SWITCH="-arch=$host_cpu"
77 schoenebeck 829 fi
78 schoenebeck 510 fi
79     AC_SUBST([CXX_CPU_SWITCH])
80    
81 persson 2197 mac=no
82     linux=no
83     case "$host" in
84     *-*-darwin*)
85     mac=yes
86     ;;
87     *-*-linux*)
88     linux=yes
89     ;;
90     esac
91     AM_CONDITIONAL(LINUX, test "$linux" = yes)
92     AM_CONDITIONAL(MAC, test "$mac" = yes)
93    
94 senoner 1502 # check if we're on MS Windows
95     AC_CHECK_HEADERS(
96     mmsystem.h,
97     have_windows=1,
98 persson 1895 have_windows=0,
99     [#include <windef.h>]
100 senoner 1502 )
101     AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
102    
103 schoenebeck 288 AC_MSG_CHECKING([whether UNIX98 compatible])
104     AC_LANG_SAVE
105     AC_LANG_C
106     AC_TRY_RUN([
107     #ifndef _GNU_SOURCE
108     #define _GNU_SOURCE 1
109     #endif
110     #include <features.h>
111     void main(void) {
112     #if _XOPEN_SOURCE >= 500
113     exit(0); /* UNIX98 compatible */
114     #else
115     exit(-1); /* not UNIX98 compatible */
116     #endif
117     }
118     ],
119     have_unix98="yes",
120     have_unix98="no",
121     have_unix98="no"
122     )
123     AC_LANG_RESTORE
124     AC_MSG_RESULT([$have_unix98])
125 senoner 1502 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
126 schoenebeck 288 if test "x$HAVE_UNIX98" = "x"; then
127     echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
128     echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
129     echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
130     echo "have a UNIX98 compatible system."
131     exit -1;
132     fi
133     fi
134    
135 wylder 822 # check for <features.h>
136     AC_CHECK_HEADERS(features.h)
137 wylder 821
138 schoenebeck 1454 # test for POSIX thread library
139     m4_ifdef([m4_include(m4/pthread.m4)],,
140     [sinclude([m4/pthread.m4])])
141     ACX_PTHREAD
142     LIBS="$PTHREAD_LIBS $LIBS"
143     CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
144     CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
145     CC="$PTHREAD_CC"
146 schoenebeck 852
147 schoenebeck 1454 # check for a bug in NPTL-enabled glibc
148     # (see Gentoo bug report #194076)
149     AC_ARG_ENABLE(nptl-bug-check,
150     [ --disable-nptl-bug-check
151     Disable check for a bug in certain NPTL-enabled
152     glibc versions that caused crashs.],
153     [config_check_nptl_bug="$enableval"],
154     [config_check_nptl_bug="yes"]
155     )
156     if test "$config_check_nptl_bug" = "yes"; then
157     m4_ifdef([m4_include(m4/nptl_bug.m4)],,
158     [sinclude([m4/nptl_bug.m4])])
159     ACX_NPTL_GLIBC_BUG([
160     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
161     echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
162     echo "probably crash due to this. Please report us the system you are"
163     echo "using and/or file a bug report to the bug tracking system of"
164     echo "your distribution."
165     echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
166     echo "well, you can try to circumvent this problem for now by setting"
167     echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
168     echo "should cause this test to pass."
169     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
170     AC_MSG_ERROR([possibly NPTL glibc bug detected])
171     ])
172     else
173     echo "NPTL glibc bug check disabled"
174     fi
175    
176 schoenebeck 1742 # FIXME: this is actually a dependency of libgig, not of LS directly, why
177     # isn't it hidden by libgig?
178     AC_CHECK_HEADERS(uuid/uuid.h)
179     AC_SEARCH_LIBS(uuid_generate, uuid)
180 schoenebeck 1454
181    
182 schoenebeck 1742
183 schoenebeck 852 ###########################################################################
184 schoenebeck 288 # Checks for available audio and MIDI systems / drivers
185     # (we throw an error if there's not at least one system for audio output and MIDI input available)
186 schoenebeck 852
187 schoenebeck 288 have_midi_input_driver="false"
188     have_audio_output_driver="false"
189    
190 schoenebeck 852 # ALSA
191     AC_ARG_ENABLE(alsa-driver,
192     [ --disable-alsa-driver
193     Disable support for the Advanced Linux Sound
194     Architecture (ALSA).],
195 schoenebeck 1360 [config_alsa_driver="$enableval"],
196 schoenebeck 852 [config_alsa_driver="yes"]
197 schoenebeck 18 )
198 schoenebeck 852 have_alsa=0
199     if test "$config_alsa_driver" = "yes"; then
200     AC_CHECK_HEADER(alsa/asoundlib.h,
201     AC_CHECK_LIB(asound, main,
202     have_alsa=1
203     ,
204     have_alsa=0
205     )
206     ,
207     have_alsa=0
208     )
209     if test "$have_alsa" = "1"; then
210     have_midi_input_driver="true"
211     have_audio_output_driver="true";
212     fi
213    
214     echo -n "checking Alsa version... "
215     AC_LANG_SAVE
216     AC_LANG_C
217     AC_TRY_RUN([
218     #include <alsa/asoundlib.h>
219     void main(void) {
220     /* ensure backward compatibility */
221     #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
222     #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
223     #endif
224     exit(SND_LIB_MAJOR);
225     }
226     ],
227     alsa_major=0,
228     alsa_major=$?,
229     alsa_major=0
230     )
231     AC_TRY_RUN([
232     #include <alsa/asoundlib.h>
233     void main(void) {
234     /* ensure backward compatibility */
235     #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
236     #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
237     #endif
238     exit(SND_LIB_MINOR);
239     }
240     ],
241     alsa_minor=0,
242     alsa_minor=$?,
243     alsa_minor=0
244     )
245     AC_TRY_RUN([
246     #include <alsa/asoundlib.h>
247     void main(void) {
248     /* ensure backward compatibility */
249     #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
250     #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
251     #endif
252     exit(SND_LIB_SUBMINOR);
253     }
254     ],
255     alsa_subminor=0,
256     alsa_subminor=$?,
257     alsa_subminor=0
258     )
259     AC_LANG_RESTORE
260     echo "$alsa_major.$alsa_minor.$alsa_subminor";
261     AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
262     AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
263     AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
264     else
265     echo "ALSA support disabled by configure script parameter"
266 schoenebeck 18 fi
267 schoenebeck 291 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
268 schoenebeck 288 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
269 schoenebeck 1876 config_have_alsa="no"
270     if test $have_alsa = "1"; then
271     config_have_alsa="yes"
272     fi
273 schoenebeck 18
274 schoenebeck 852 # JACK
275     AC_ARG_ENABLE(jack-driver,
276     [ --disable-jack-driver
277     Disable support for the Jack Audio Connection Kit
278     (JACK).],
279 schoenebeck 1360 [config_jack_driver="$enableval"],
280 schoenebeck 852 [config_jack_driver="yes"]
281 schoenebeck 18 )
282 schoenebeck 852 have_jack=0
283     if test "$config_jack_driver" = "yes"; then
284     PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
285     if test $have_jack = "1"; then
286     AC_SUBST(JACK_LIBS)
287     AC_SUBST(JACK_CFLAGS)
288 persson 1748 linuxsampler_save_LIBS=$LIBS
289     LIBS="$JACK_LIBS $LIBS"
290     AC_CHECK_FUNCS(jack_client_name_size jack_client_open)
291     LIBS=$linuxsampler_save_LIBS
292 schoenebeck 852 have_audio_output_driver="true";
293     fi
294 schoenebeck 33 else
295 schoenebeck 852 echo "JACK support disabled by configure script parameter"
296 schoenebeck 33 fi
297 schoenebeck 852 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
298     AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
299 schoenebeck 1876 config_have_jack="no"
300     if test $have_jack = "1"; then
301     config_have_jack="yes"
302     fi
303 schoenebeck 31
304 persson 1651 # JACK MIDI
305     have_jack_midi=0
306     if test $have_jack = "1"; then
307 persson 1652 linuxsampler_save_CFLAGS=$CFLAGS
308     linuxsampler_save_LIBS=$LIBS
309     CFLAGS="$JACK_CFLAGS $CFLAGS"
310     LIBS="$JACK_LIBS $LIBS"
311     AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
312     if test $have_jack_midi = "1"; then
313     AC_CHECK_FUNCS(jack_midi_get_event_count)
314     AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
315     jack_midi_clear_buffer(0, 0);
316     ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
317     [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
318     have_midi_input_driver="true"
319     fi
320     CFLAGS=$linuxsampler_save_CFLAGS
321     LIBS=$linuxsampler_save_LIBS
322 persson 1651 fi
323     AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
324     AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
325     [Define to 1 if you have JACK with MIDI support installed.])
326 schoenebeck 1876 config_have_jack_midi="no"
327     if test $have_jack_midi = "1"; then
328     config_have_jack_midi="yes"
329     fi
330 persson 1651
331 schoenebeck 838 # ARTS
332 schoenebeck 852 AC_ARG_ENABLE(arts-driver,
333     [ --disable-arts-driver
334     Disable support for the Analogue Realtime System
335     (aRts).],
336 schoenebeck 1360 [config_arts_driver="$enableval"],
337 schoenebeck 852 [config_arts_driver="yes"]
338     )
339     have_arts=0
340     if test "$config_arts_driver" = "yes"; then
341     m4_ifdef([m4_include(m4/arts.m4)],,
342     [sinclude([m4/arts.m4])])
343     AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
344     if test "$have_arts" = "1"; then
345     have_audio_output_driver="true"
346     fi
347     else
348     echo "ARTS support disabled by configure script parameter"
349 schoenebeck 838 fi
350     AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
351     AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
352 schoenebeck 1876 config_have_arts="no"
353     if test $have_arts = "1"; then
354     config_have_arts="yes"
355     fi
356 schoenebeck 838
357 senoner 1502 # ASIO AUDIO (Win32)
358     AC_ARG_ENABLE(asiosdk-dir,
359     [ --enable-asiosdk-dir
360     Directory where the ASIO SDK is located, this automatically
361     enables the compilation of the ASIO audio output driver.],
362     [config_asiosdk_dir="${enableval}"],
363     [config_asiosdk_dir="."]
364     )
365     AC_SUBST(config_asiosdk_dir)
366    
367     AC_ARG_ENABLE(asio-driver,
368     [ --disable-asio-driver
369     Disable support for the Windows ASIO driver.],
370     [config_asio_driver="$enableval"],
371     [config_asio_driver="yes"]
372     )
373     have_asio=0
374     ASIOSDK_BASEDIR=
375     if test "$config_asio_driver" = "yes"; then
376     asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
377     echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
378     if test -e $asiosdk_headerfile ; then
379     echo yes
380     have_asio=1
381     ASIOSDK_BASEDIR="$config_asiosdk_dir"
382     else
383     echo no
384     have_asio=0
385     fi
386     if test "$have_asio" = "1"; then
387     have_audio_output_driver="true"
388     fi
389     else
390     echo "Windows ASIO support disabled by configure script parameter"
391     fi
392     AC_SUBST(ASIOSDK_BASEDIR)
393     AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
394     AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
395 schoenebeck 1876 config_have_asio="no"
396     if test $have_asio = "1"; then
397     config_have_asio="yes"
398     fi
399 senoner 1502
400 schoenebeck 609 # MidiShare (Linux, OS X, Windows)
401 schoenebeck 852 AC_ARG_ENABLE(midishare-driver,
402     [ --disable-midishare-driver
403     Disable support for the MidiShare system.],
404 schoenebeck 1360 [config_midishare_driver="$enableval"],
405 schoenebeck 852 [config_midishare_driver="yes"]
406 schoenebeck 609 )
407 schoenebeck 852 have_midishare=0
408     if test "$config_midishare_driver" = "yes"; then
409     AC_CHECK_HEADER(MidiShare.h,
410     AC_CHECK_LIB(MidiShare, MidiCountEvs,
411     have_midishare=1,
412     have_midishare=0
413     )
414     ,
415     have_midishare=0
416     )
417     if test "$have_midishare" = "1"; then
418     have_midi_input_driver="true"
419     fi
420     else
421     echo "MidiShare support disabled by configure script parameter"
422 schoenebeck 609 fi
423     AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
424     AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
425 schoenebeck 1876 config_have_midishare="no"
426     if test $have_midishare = "1"; then
427     config_have_midishare="yes"
428     fi
429 schoenebeck 609
430     # CoreMIDI (OS X)
431 schoenebeck 852 AC_ARG_ENABLE(coremidi-driver,
432     [ --disable-coremidi-driver
433     Disable support for the Apple CoreMIDI system.],
434 schoenebeck 1360 [config_coremidi_driver="$enableval"],
435 schoenebeck 852 [config_coremidi_driver="yes"]
436 schoenebeck 609 )
437 schoenebeck 852 have_coremidi=0
438     if test "$config_coremidi_driver" = "yes"; then
439     AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
440     have_coremidi=1,
441     have_coremidi=0
442     )
443     if test "$have_coremidi" = "1"; then
444     have_midi_input_driver="true"
445     fi
446     else
447     echo "CoreMIDI support disabled by configure script parameter"
448 schoenebeck 609 fi
449     AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
450     AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
451 schoenebeck 1876 config_have_coremidi="no"
452     if test $have_coremidi = "1"; then
453     config_have_coremidi="yes"
454     fi
455 schoenebeck 609
456 iliev 1829 # CoreAudio (OS X)
457     AC_ARG_ENABLE(coreaudio-driver,
458     [ --disable-coreaudio-driver
459     Disable support for the Apple CoreAudio system.],
460     [config_coreaudio_driver="$enableval"],
461     [config_coreaudio_driver="yes"]
462     )
463     have_coreaudio=0
464     if test "$config_coreaudio_driver" = "yes"; then
465     AC_CHECK_HEADER(CoreAudio/CoreAudio.h,
466     have_coreaudio=1,
467     have_coreaudio=0
468     )
469     if test "$have_coreaudio" = "1"; then
470     have_audio_output_driver="true"
471     fi
472     else
473     echo "CoreAudio support disabled by configure script parameter"
474     fi
475     AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1")
476     AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.])
477 schoenebeck 1876 config_have_coreaudio="no"
478     if test $have_coreaudio = "1"; then
479     config_have_coreaudio="yes"
480     fi
481 iliev 1829
482 senoner 1502 # MME MIDI (Win32)
483     AC_ARG_ENABLE(mmemidi-driver,
484     [ --disable-mmemidi-driver
485     Disable support for the Windows MME MIDI system.],
486     [config_mmemidi_driver="$enableval"],
487     [config_mmemidi_driver="yes"]
488     )
489     have_mmemidi=0
490     if test "$config_mmemidi_driver" = "yes"; then
491     AC_CHECK_HEADERS(mmsystem.h,
492     have_mmemidi=1,
493     have_mmemidi=0
494     )
495     if test "$have_mmemidi" = "1"; then
496     have_midi_input_driver="true"
497     fi
498     else
499     echo "MME MIDI support disabled by configure script parameter"
500     fi
501     AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
502     AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
503 schoenebeck 1876 config_have_mme="no"
504     if test $have_mmemidi = "1"; then
505     config_have_mme="yes"
506     fi
507 senoner 1502
508 persson 1777 # DSSI
509     AC_CHECK_HEADERS(dssi.h,
510 schoenebeck 1876 config_have_dssi="yes",
511     config_have_dssi="no")
512     AM_CONDITIONAL(HAVE_DSSI, test $config_have_dssi = "yes")
513 persson 1777
514     # LV2
515 persson 2343 PKG_CHECK_MODULES(LV2, lv2,
516     [config_have_lv2="yes"
517     AC_DEFINE(HAVE_LV2_PACKAGE, 1,
518     [Define to 1 if you have the lv2 package installed.])],
519     [config_have_lv2="no"
520     PKG_CHECK_MODULES(LV2, lv2core, config_have_lv2="yes",
521     [AC_CHECK_HEADER(lv2.h, config_have_lv2="yes")])])
522    
523     AC_SUBST(LV2_CFLAGS)
524     AC_SUBST(LV2_LIBS)
525 schoenebeck 1876 AM_CONDITIONAL(HAVE_LV2, test $config_have_lv2 = "yes")
526 persson 1777
527     # VST
528     AC_ARG_ENABLE(vstsdk-dir,
529     [ --enable-vstsdk-dir
530     Directory where the VST SDK is located.
531     This automatically enables the compilation
532     of the VST plugin.],
533     [VSTSDK_DIR="${enableval}"],
534     [VSTSDK_DIR=]
535     )
536     AC_SUBST(VSTSDK_DIR)
537     AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
538 schoenebeck 1876 config_have_vst="no"
539     if test "x$VSTSDK_DIR" != "x"; then
540     config_have_vst="yes"
541     fi
542 persson 1777
543 iliev 1846 # AU
544     AC_CHECK_HEADERS(AudioUnit/AudioUnit.h,
545 schoenebeck 1876 config_have_au="yes",
546     config_have_au="no")
547     AM_CONDITIONAL(HAVE_AU, test $config_have_au = "yes")
548 iliev 1855 AM_CONDITIONAL(HAVE_AUFLAGS, test "$AUFLAGS" != "")
549 persson 1777
550 persson 2183 if test $config_have_au = "yes" ; then
551     if test "x$DEVELOPER_EXTRAS_DIR" = "x" ; then
552     if test -d /Developer/Extras ; then
553     DEVELOPER_EXTRAS_DIR=/Developer/Extras
554     else
555     DEVELOPER_EXTRAS_DIR=/Developer/Examples
556     fi
557     fi
558     AC_SUBST(DEVELOPER_EXTRAS_DIR)
559     fi
560 iliev 1846
561 persson 2203 if test "x$MAC_PLUGIN_INSTALL_DIR" = "x" ; then
562     MAC_PLUGIN_INSTALL_DIR=/Library/Audio/Plug-Ins
563     fi
564     AC_SUBST(MAC_PLUGIN_INSTALL_DIR)
565    
566 schoenebeck 1364 # have we found at least one MIDI input and one audio output driver ?
567     if test "$have_midi_input_driver" = "false"; then
568     echo "No supported MIDI input system found!"
569     echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
570 persson 1652 echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
571 schoenebeck 1364 echo "If you think you have one of those available on your system, make sure you"
572     echo "also have the respective development (header) files installed."
573     exit -1;
574     fi
575     if test "$have_audio_output_driver" = "false"; then
576     echo "No supported audio output system found!"
577 persson 1652 echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
578 schoenebeck 1364 echo "driver at the moment!"
579     exit -1;
580     fi
581    
582    
583    
584     ###########################################################################
585     # Checks for various DLL libraries
586    
587 schoenebeck 504 # Check presence of libgig
588 schoenebeck 1956 libgig_version="3.3.0"
589 schoenebeck 504 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
590     if test "$HAVE_GIG" = "false"; then
591     echo "Required libgig version not found!"
592     echo "You need to have libgig version ${libgig_version} installed!"
593     exit -1;
594 schoenebeck 714 else
595     echo "yes, found libgig $libgig_version"
596 schoenebeck 504 fi
597     AC_SUBST(GIG_CFLAGS)
598     AC_SUBST(GIG_LIBS)
599    
600 iliev 2018 # SF2 Engine (requires libgig)
601 iliev 2012 AC_ARG_ENABLE(sf2-engine,
602     [ --disable-sf2-engine
603     Disable compilation of the SF2 engine.
604 iliev 2018 You need to have libgig installed.],
605 iliev 2012 [config_sf2_engine="$enableval"],
606     [config_sf2_engine="yes"]
607     )
608     HAVE_SF2=0;
609     if test "$config_sf2_engine" = "yes"; then
610 iliev 2018 HAVE_SF2=1
611 iliev 2012 else
612     echo "SF2 engine disabled by configure script parameter"
613     fi
614     AM_CONDITIONAL(HAVE_SF2, test $HAVE_SF2 = 1)
615     AC_DEFINE_UNQUOTED(HAVE_SF2,$HAVE_SF2,[Define to 1 if you want SF2 engine and have libsf2 installed.])
616     config_have_sf2="no"
617     if test $HAVE_SF2 = "1"; then
618     config_have_sf2="yes"
619     fi
620    
621     # Check presence of libsndfile
622     libsndfile_version="1.0"
623     PKG_CHECK_MODULES(SNDFILE, sndfile >= $libsndfile_version, HAVE_SNDFILE=true, HAVE_SNDFILE=false)
624     if test "$HAVE_SNDFILE" = "false"; then
625     echo "Required libsndfile version not found!"
626     echo "You need to have libsndfile version ${libsndfile_version} installed!"
627     exit -1;
628     else
629     echo "yes, found libsndfile $libsndfile_version"
630     fi
631     AC_SUBST(SNDFILE_CFLAGS)
632     AC_SUBST(SNDFILE_LIBS)
633    
634 persson 2119 # Check for Vorbis support in libsndfile
635     linuxsampler_save_CFLAGS=$CFLAGS
636     CFLAGS="$SNDFILE_CFLAGS $CFLAGS"
637 persson 2343 AC_CHECK_DECLS([SF_FORMAT_VORBIS], [], [], [[#include <sndfile.h>]])
638 persson 2167
639     # Check for loop functionality in libsndfile
640     AC_CHECK_MEMBERS([SF_INSTRUMENT.loops],,
641     [AC_MSG_WARN([Your version of libsndfile does not support
642     reading of loop information. LinuxSampler will not be able to
643     extract loop information from sample files.])],
644     [#include <sndfile.h>])
645 persson 2119 CFLAGS=$linuxsampler_save_CFLAGS
646    
647 schoenebeck 1364 # Instruments DB feature (requires SQLite 3.3)
648     AC_ARG_ENABLE(instruments-db,
649     [ --disable-instruments-db
650     Disable compilation of the sampler's instruments
651     database feature. You need to have SQLite 3.3
652     or younger installed for this feature.],
653     [config_instruments_db="$enableval"],
654     [config_instruments_db="yes"]
655     )
656     HAVE_SQLITE3=0;
657     if test "$config_instruments_db" = "yes"; then
658     # Check presence of sqlite3
659     sqlite_version="3.3"
660     PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
661     AC_SUBST(SQLITE3_LIBS)
662     AC_SUBST(SQLITE3_CFLAGS)
663     if test $HAVE_SQLITE3 = false; then
664     HAVE_SQLITE3=0
665     config_instruments_db="no"
666     echo "*** Required sqlite version not found!"
667     echo "*** You need to have sqlite version ${sqlite_version} or higher"
668     echo "*** for instruments database support to be enabled."
669     echo "*** Support for instruments DB will be disabled!"
670     else
671     HAVE_SQLITE3=1
672     fi
673 senkov 397 else
674 schoenebeck 1364 echo "Instruments DB feature disabled by configure script parameter"
675 senkov 397 fi
676     AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
677 schoenebeck 1364 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
678 schoenebeck 31
679 schoenebeck 288
680    
681 schoenebeck 554 ###########################################################################
682     # Handle Configuration Options
683    
684     # TODO: should we use AC_ARG_VAR(variable, description) instead?
685    
686 schoenebeck 617 AC_ARG_ENABLE(asm,
687 schoenebeck 1259 [ --disable-asm
688 schoenebeck 738 Enable hand-crafted assembly optimizations
689 schoenebeck 1259 (default=on). LinuxSampler provides CPU specific
690     assembly optimizations. This is currently limited
691     to just enter a fast (denormal) FPU mode on x86
692     platforms. There are currently no synthesis core
693     assembly optimizations anymore since LS 0.4.0],
694 schoenebeck 1360 [config_asm="$enableval"],
695 schoenebeck 1259 [config_asm="yes"]
696 schoenebeck 617 )
697     if test "$config_asm" = "yes"; then
698 schoenebeck 1259 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
699 schoenebeck 617 fi
700    
701 schoenebeck 554 AC_ARG_ENABLE(dev-mode,
702 schoenebeck 1424 [ --enable-dev-mode
703     Enable development mode (default=off). In that mode
704 schoenebeck 554 we do some extra sanity checks here and there.
705     This helps to spot possible problems, but reduces
706     efficiency a bit],
707 schoenebeck 1360 [config_dev_mode="$enableval"],
708 schoenebeck 1424 [config_dev_mode="no"]
709 schoenebeck 554 )
710     if test "$config_dev_mode" = "yes"; then
711     AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
712     fi
713    
714     AC_ARG_ENABLE(debug-level,
715     [ --enable-debug-level
716     Specify verbosity of console messages (default=1).
717     The higher the value, the higher will be verbosity.
718     A value of 0 means no console output at all.
719     There's not really an upper limit but the usual
720     level of all messages is currently somewhere less
721     than 10.],
722     [config_debug_level="${enableval}"],
723     [config_debug_level="1"]
724     )
725     AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
726    
727     AC_ARG_ENABLE(rt-exceptions,
728     [ --enable-rt-exceptions
729     Enable exceptions in the realtime thread
730     (default=no). If this is enabled, exceptions will
731     be thrown on critical errors in the realtime
732     context as well. Otherwise if disabled
733     segmentation faults will be forced by the
734     application on critical errors.],
735 schoenebeck 1360 [config_rt_exceptions="$enableval"],
736 schoenebeck 554 [config_rt_exceptions="no"]
737     )
738     if test "$config_rt_exceptions" = "yes"; then
739     AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
740     fi
741    
742 persson 2197 config_pthread_testcancel="$mac"
743 nagata 1649 AC_ARG_ENABLE(pthread-testcancel,
744     [ --enable-pthread-testcancel
745 persson 2185 Enable pthread_testcancel() calls and avoid
746     asynchronous cancel of pthreads (default=yes
747     for Mac targets, no otherwise).],
748 nagata 1649 [config_pthread_testcancel="$enableval"],
749 persson 2343 [])
750 nagata 1649 if test "$config_pthread_testcancel" = "yes"; then
751     AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
752     fi
753    
754 schoenebeck 554 AC_ARG_ENABLE(preload-samples,
755     [ --enable-preload-samples
756     Due to seeking and latency issues with hard drives
757     we have to cache a small part of samples' head in
758     RAM (default=32768). The higher this value the
759     more memory will be occupied for each sample, but
760     the safer this will be in regards of possible
761     droputs. A 'good' value depends on the running
762     system and usage dependant factors.],
763     [config_preload_samples="${enableval}"],
764     [config_preload_samples="32768"]
765     )
766     AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
767    
768     AC_ARG_ENABLE(max-pitch,
769     [ --enable-max-pitch
770     Specify the maximum allowed pitch value in octaves
771     (default=4). To lower memory usage you might want
772     set a smaller value.],
773     [config_max_pitch="${enableval}"],
774     [config_max_pitch="4"]
775     )
776     AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
777    
778     AC_ARG_ENABLE(max-events,
779     [ --enable-max-events
780     Specify the maximum allowed amount of events to be
781     processed per fragment (default=1024).],
782     [config_max_events="${enableval}"],
783     [config_max_events="1024"]
784     )
785     AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
786    
787     AC_ARG_ENABLE(eg-bottom,
788     [ --enable-eg-bottom
789     Bottom limit of envelope generators
790     (default=0.001). Certain kinds of curve types like
791     exponential curves converge against 0 but never
792     reach 0. So we have to define a certain low value
793     after which we should consider all smaller values
794     to be 'almost zero'. The smaller this value, the
795     longer will voices survive in EG's release stage
796     and thus waste voices. If this value is too high
797     will cause click sounds though.],
798     [config_eg_bottom="${enableval}"],
799     [config_eg_bottom="0.001"]
800     )
801     AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
802    
803     AC_ARG_ENABLE(eg-min-release-time,
804     [ --enable-eg-min-release-time
805     Specify the lowest allowed release time in seconds
806     (default=0.0025). This value will also be used to
807     ramp down voices on voice stealing. This value
808     should always be less than the period time of the
809     used audio driver, as in case of voice stealing
810     the killed voice needs to be completely ramped
811     down in the same fragment.],
812     [config_eg_min_release_time="${enableval}"],
813     [config_eg_min_release_time="0.0025"]
814     )
815     AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
816    
817     AC_ARG_ENABLE(refill-streams,
818     [ --enable-refill-streams
819     Number of streams that should be refilled in each
820     disk thread cycle (default=4).],
821     [config_refill_streams="${enableval}"],
822     [config_refill_streams="4"]
823     )
824     AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
825    
826     AC_ARG_ENABLE(stream-min-refill,
827     [ --enable-stream-min-refill
828     Minimum refill size for disk streams (default=1024).
829     The disk thread will go to sleep for a while if no
830     stream had to be refilled more than this value in
831     a disk thread cycle.],
832     [config_stream_min_refill="${enableval}"],
833     [config_stream_min_refill="1024"]
834     )
835     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
836    
837     AC_ARG_ENABLE(stream-max-refill,
838     [ --enable-stream-max-refill
839     Maximum refill size for disk streams
840     (default=65536). The disk thread will refill
841     each stream only by a size of this value per
842     disk thread cycle.],
843     [config_stream_max_refill="${enableval}"],
844     [config_stream_max_refill="65536"]
845     )
846     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
847    
848     AC_ARG_ENABLE(stream-size,
849     [ --enable-stream-size
850     Size of each stream's ring buffer in sample points
851     (default=262144).],
852     [config_stream_size="${enableval}"],
853     [config_stream_size="262144"]
854     )
855     AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
856    
857     AC_ARG_ENABLE(max-streams,
858     [ --enable-max-streams
859 schoenebeck 1800 Initial maximum amount of disk streams
860     (default=90). This value can be changed at
861     runtime. It should always be higher than the
862     maximum amount of voices.],
863 schoenebeck 554 [config_max_streams="${enableval}"],
864     [config_max_streams="90"]
865     )
866 schoenebeck 1800 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
867 schoenebeck 554
868     AC_ARG_ENABLE(max-voices,
869     [ --enable-max-voices
870 schoenebeck 1800 Initial maximum amount of voices (default=64).
871     This value can be changed at runtime. It should
872     always be lower than the maximum amount of disk
873     streams.],
874 schoenebeck 554 [config_max_voices="${enableval}"],
875     [config_max_voices="64"]
876     )
877 schoenebeck 1800 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
878 schoenebeck 554
879 schoenebeck 738 AC_ARG_ENABLE(subfragment-size,
880     [ --enable-subfragment-size
881     Every audio fragment will be splitted into
882     subfragments. Where each subfragment renders
883     audio with constant synthesis parameters. This is
884     done for efficiency reasons. This parameter
885     defines the default size of a subfragment in
886     sample points. A large value means less CPU time
887     whereas a low value means better audio quality
888     (default=32).],
889     [config_subfragment_size="${enableval}"],
890     [config_subfragment_size="32"]
891     )
892     AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
893    
894 schoenebeck 1005 AC_ARG_ENABLE(global-attenuation-default,
895     [ --enable-global-attenuation-default
896 schoenebeck 781 To prevent clipping all samples will be lowered
897 schoenebeck 1005 in amplitude by this given default factor (can
898     be overridden at runtime).
899 schoenebeck 781 (default=0.35)],
900 schoenebeck 1005 [config_global_attenuation_default="${enableval}"],
901     [config_global_attenuation_default="0.35"]
902 schoenebeck 781 )
903 schoenebeck 1005 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
904 schoenebeck 781
905 schoenebeck 554 AC_ARG_ENABLE(voice-steal-algo,
906     [ --enable-voice-steal-algo
907     Voice stealing algorithm to be used. Currently
908     available options:
909     none:
910     Disable voice stealing completely.
911 schoenebeck 563 oldestvoiceonkey (default):
912 schoenebeck 554 Try to kill a voice on the same key first,
913     if no success, proceed with the oldest key.
914 schoenebeck 563 oldestkey:
915 schoenebeck 554 Try to kill a voice from the oldest active
916     key.],
917     [ if test ! "(" "${enableval}" = "none" \
918     -o "${enableval}" = "oldestvoiceonkey" \
919     -o "${enableval}" = "oldestkey" ")" ; then
920     AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
921     else
922     config_voice_steal_algo="${enableval}"
923 schoenebeck 579 fi
924 schoenebeck 554 ],
925 schoenebeck 563 [config_voice_steal_algo="oldestvoiceonkey"]
926 schoenebeck 554 )
927     AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
928    
929     AC_ARG_ENABLE(sysex-buffer-size,
930     [ --enable-sysex-buffer-size
931     System Exclusive Message buffer size in kB
932     (default=2048).],
933     [config_sysex_buffer_size="${enableval}"],
934     [config_sysex_buffer_size="2048"]
935     )
936     AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
937    
938     AC_ARG_ENABLE(force-filter,
939     [ --enable-force-filter
940     If enabled will force filter to be used even if
941     no usage was define in instrument patch files.
942     (default=no).],
943 schoenebeck 1360 [config_force_filter="$enableval"],
944 schoenebeck 554 [config_force_filter="no"]
945     )
946     if test "$config_force_filter" = "yes"; then
947     AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
948     fi
949    
950     AC_ARG_ENABLE(filter-cutoff-min,
951     [ --enable-filter-cutoff-min
952     Minimum filter cutoff frequency in Hz
953     (default=100.0).],
954     [config_filter_cutoff_min="${enableval}"],
955     [config_filter_cutoff_min="100.0"]
956     )
957     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
958    
959     AC_ARG_ENABLE(filter-cutoff-max,
960     [ --enable-filter-cutoff-max
961     Maximum filter cutoff frequency in Hz
962     (default=10000.0).],
963     [config_filter_cutoff_max="${enableval}"],
964     [config_filter_cutoff_max="10000.0"]
965     )
966     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
967    
968     AC_ARG_ENABLE(override-cutoff-ctrl,
969     [ --enable-override-cutoff-ctrl
970     Override filter cutoff MIDI controller (default=no).
971     Note: you have to define the MIDI controller number
972     here, it's not a boolean parameter type! If this
973     option is used, controller number given by
974     instrument patch will be ignored and instead this
975     supplied value will be used.],
976     [config_override_cutoff_ctrl="${enableval}"],
977     [config_override_cutoff_ctrl="no"]
978     )
979     if test ! "$config_override_cutoff_ctrl" = "no"; then
980     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
981     fi
982    
983     AC_ARG_ENABLE(override-resonance-ctrl,
984     [ --enable-override-resonance-ctrl
985     Override filter resonance MIDI controller
986     (default=no). Note: you have to define the MIDI
987     controller number here, it's not a boolean
988     parameter type! If this option is used, controller
989     number given by instrument patch will be ignored
990     and instead this supplied value will be used.],
991     [config_override_resonance_ctrl="${enableval}"],
992     [config_override_resonance_ctrl="no"]
993     )
994     if test ! "$config_override_resonance_ctrl" = "no"; then
995     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
996     fi
997    
998     AC_ARG_ENABLE(override-filter-type,
999     [ --enable-override-filter-type
1000     Override filter type (default=no). Options:
1001     hp: for highpass
1002     bp: for bandpass
1003     br: for bandreject
1004     lp: for lowpass
1005     lpt: for lowpass turbo],
1006     [ if test "${enableval}" = "hp" ; then
1007     config_override_filter_type="::gig::vcf_type_highpass"
1008     elif test "${enableval}" = "bp" ; then
1009     config_override_filter_type="::gig::vcf_type_bandpass"
1010     elif test "${enableval}" = "br" ; then
1011     config_override_filter_type="::gig::vcf_type_bandreject"
1012     elif test "${enableval}" = "lp" ; then
1013     config_override_filter_type="::gig::vcf_type_lowpass"
1014     elif test "${enableval}" = "lpt" ; then
1015     config_override_filter_type="::gig::vcf_type_lowpassturbo"
1016     elif test ! "${enableval}" = "no"; then
1017     AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
1018 schoenebeck 579 fi
1019 schoenebeck 554 ],
1020     [config_override_filter_type="no"]
1021     )
1022     if test ! "$config_override_filter_type" = "no"; then
1023     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
1024     fi
1025    
1026 schoenebeck 563 AC_ARG_ENABLE(gs-checksum,
1027     [ --enable-gs-checksum
1028     Enable Roland General Synth SysEx checksum check
1029     (default=no). If this is enabled, all GS SysEx
1030     messages which do not provide a correct checksum
1031     will be ignored. This is disabled by default as
1032     not all devices honor GS checksums.],
1033 schoenebeck 1360 [config_assert_gs_sysex_checksum="$enableval"],
1034 schoenebeck 563 [config_assert_gs_sysex_checksum="no"]
1035     )
1036     if test "config_assert_gs_sysex_checksum" = "yes"; then
1037     AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
1038     fi
1039    
1040 schoenebeck 829 AC_ARG_ENABLE(portamento-time-min,
1041     [ --enable-portamento-time-min
1042     Minimum Portamento time in seconds
1043     (default=0.1).],
1044     [config_portamento_time_min="${enableval}"],
1045     [config_portamento_time_min="0.1"]
1046     )
1047     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
1048    
1049     AC_ARG_ENABLE(portamento-time-max,
1050     [ --enable-portamento-time-max
1051     Maximum Portamento time in seconds
1052     (default=32).],
1053     [config_portamento_time_max="${enableval}"],
1054     [config_portamento_time_max="32"]
1055     )
1056     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
1057    
1058     AC_ARG_ENABLE(portamento-time-default,
1059     [ --enable-portamento-time-default
1060     Default Portamento time in seconds
1061     (default=1).],
1062     [config_portamento_time_default="${enableval}"],
1063     [config_portamento_time_default="1"]
1064     )
1065     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
1066    
1067 schoenebeck 714 AC_ARG_ENABLE(signed-triang-algo,
1068     [ --enable-signed-triang-algo
1069     Signed triangular wave algorithm to be used (e.g. for LFOs).
1070     Currently available options:
1071     intmath:
1072     Uses integer math without any branch will then be
1073     converted to floating point value for each sample point.
1074     This int->float conversion might hurt on some systems.
1075 senkov 720 intmathabs:
1076     Similar to intmath but uses abs() function.
1077     Depending on compiler and platrofm this could
1078     perform better than integer math as it avoids
1079 schoenebeck 1360 an extra integer multiply instruction.
1080 schoenebeck 714 diharmonic:
1081     The triangular wave will be approximated by adding two
1082     sinusoidials. This solution might especially hurt on
1083     systems with weak floating point unit.
1084     benchmark (default):
1085     This is not an algorithm. Use this option if the
1086     appropriate algorithm should be automatically
1087     chosen by the configure script by performing a
1088     benchmark between the algorithms mentioned above.
1089     This will NOT work for cross compilation!],
1090     [ if test ! "(" "${enableval}" = "intmath" \
1091 senkov 720 -o "${enableval}" = "intmathabs" \
1092 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
1093     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
1094     else
1095     config_signed_triang_algo="${enableval}"
1096     fi
1097     ],
1098     [config_signed_triang_algo="benchmark"]
1099     )
1100 schoenebeck 563
1101 schoenebeck 714 AC_ARG_ENABLE(unsigned-triang-algo,
1102     [ --enable-unsigned-triang-algo
1103     Unsigned triangular wave algorithm to be used (e.g. for LFOs).
1104     Currently available options:
1105     intmath:
1106     Uses integer math without any branch will then be
1107     converted to floating point value for each sample point.
1108     This int->float conversion might hurt on some systems.
1109 senkov 720 intmathabs:
1110     Similar to intmath but uses abs() function.
1111     Depending on compiler and platrofm this could
1112     perform better than integer math as it avoids
1113 schoenebeck 1360 an extra integer multiply instruction.
1114 schoenebeck 714 diharmonic:
1115     The triangular wave will be approximated by adding two
1116     sinusoidials. This solution might especially hurt on
1117     systems with weak floating point unit.
1118     benchmark (default):
1119     This is not an algorithm. Use this option if the
1120     appropriate algorithm should be automatically
1121     chosen by the configure script by performing a
1122     benchmark between the algorithms mentioned above.
1123     This will NOT work for cross compilation!],
1124     [ if test ! "(" "${enableval}" = "intmath" \
1125 senkov 720 -o "${enableval}" = "intmathabs" \
1126 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
1127     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
1128     else
1129     config_unsigned_triang_algo="${enableval}"
1130     fi
1131     ],
1132     [config_unsigned_triang_algo="benchmark"]
1133     )
1134    
1135 iliev 716 AC_ARG_ENABLE(process-muted-channels,
1136     [ --enable-process-muted-channels
1137     Enable processing of muted channels (default=no).
1138     In that mode all MIDI events in the muted channels
1139     will be processed. This will provide information
1140     about the active voices in the muted channels and
1141     will not discard notes, triggered in mute mode,
1142     when the channel is unmuted. But also will reduce
1143     the efficiency.],
1144 schoenebeck 1360 [config_process_muted_channels="$enableval"],
1145 iliev 716 [config_process_muted_channels="no"]
1146     )
1147     if test "$config_process_muted_channels" = "yes"; then
1148     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
1149     fi
1150 schoenebeck 714
1151 schoenebeck 849 AC_ARG_ENABLE(process-all-notes-off,
1152     [ --disable-process-all-notes-off
1153     Disable interpretation of All-Notes-Off MIDI
1154     messages (default=on). By default LS will release
1155     all voices whenever it receives an All-Notes-Off
1156     MIDI message. You can disable this behavior, so
1157     that LS simply ignores such messages.],
1158 schoenebeck 1360 [config_process_all_notes_off="$enableval"],
1159 schoenebeck 849 [config_process_all_notes_off="yes"]
1160     )
1161     if test "$config_process_all_notes_off" = "yes"; then
1162     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
1163     fi
1164    
1165 persson 830 AC_ARG_ENABLE(interpolate-volume,
1166     [ --disable-interpolate-volume
1167     Disable interpolation of volume modulation
1168     (default=on). With this enabled, the volume changes
1169     generated by for example the envelope generator
1170     will be smoother, minimizing the risk for audio
1171     clicks. Disable it to reduce CPU usage.],
1172 schoenebeck 1360 [config_interpolate_volume="$enableval"],
1173 persson 830 [config_interpolate_volume="yes"]
1174     )
1175     if test "$config_interpolate_volume" = "yes"; then
1176     AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
1177     fi
1178 iliev 716
1179 schoenebeck 1762 AC_ARG_ENABLE(master-volume-sysex-by-port,
1180     [ --enable-master-volume-sysex-by-port
1181     Whether global volume sysex message should be
1182     applied globally to the whole sampler or only to
1183     the sampler channels connected to the same MIDI
1184     input port on which the sysex message arrived on.
1185     By default global volume sysex messages apply
1186     globally to the whole sampler, since many MIDI
1187     devices behave that way.],
1188     [config_master_volume_sysex_by_port="$enableval"],
1189     [config_master_volume_sysex_by_port="no"]
1190     )
1191     if test "$config_master_volume_sysex_by_port" = "yes"; then
1192     AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
1193     fi
1194    
1195 schoenebeck 1212 AC_ARG_ENABLE(plugin-dir,
1196     [ --enable-plugin-dir
1197     Directory where the sampler shall look for potential plugins,
1198     that is 3rd party shared libraries that should be loaded by
1199     the sampler on startup. By default the sampler will search
1200     for plugins in the subdirectory "plugins" below its own
1201     library directory.
1202     (i.e. /usr/local/lib/linuxsampler/plugins)],
1203     [config_plugin_dir="${enableval}"],
1204     [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1205     )
1206     AC_SUBST(config_plugin_dir)
1207 persson 830
1208 schoenebeck 1364 AC_ARG_ENABLE(default-instruments-db-location,
1209     [ --enable-default-instruments-db-location
1210     Only when instruments DB feature is enabled: file name
1211     which shall be taken as default location of the
1212     instruments DB file. This location can still be
1213     overridden at runtime with a command line switch.
1214     (default: /var/lib/linuxsampler/instruments.db)],
1215     [config_default_instruments_db_file="${enableval}"],
1216     [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1217     )
1218     AC_DEFINE_UNQUOTED(
1219     CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1220     "$config_default_instruments_db_file",
1221     [Only when instruments DB feature is enabled: default location of the DB file.]
1222     )
1223 schoenebeck 1432 AC_SUBST(config_default_instruments_db_file)
1224 schoenebeck 1212
1225 schoenebeck 1364
1226 schoenebeck 554 ###########################################################################
1227 schoenebeck 714 # Automatic Benchmarks (to detect the best algorithms for the system)
1228    
1229     AC_LANG_SAVE
1230    
1231     if test "$config_signed_triang_algo" = "benchmark"; then
1232     echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1233     AC_LANG_CPLUSPLUS
1234     AC_TRY_RUN([
1235     #define SIGNED 1
1236     #define SILENT 1
1237 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1238 schoenebeck 714 ],
1239     triang_signed=0,
1240     triang_signed=$?,
1241     triang_signed=0
1242     )
1243     if test "$triang_signed" = "2"; then
1244     config_signed_triang_algo="intmath"
1245     echo "integer math"
1246     elif test "$triang_signed" = "3"; then
1247     config_signed_triang_algo="diharmonic"
1248     echo "di harmonics"
1249 senkov 720 elif test "$triang_signed" = "5"; then
1250     config_signed_triang_algo="intmathabs"
1251     echo "integer math using abs()"
1252 schoenebeck 714 else
1253     echo "Benchmark of signed triangular wave algorithms failed!"
1254     echo "Maybe you are doing cross compilation? In that case you have to select"
1255     echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1256     echo "Call './configure --help' for further information or read configure.in."
1257     exit -1;
1258     fi
1259 schoenebeck 1165 else
1260     case "$config_signed_triang_algo" in
1261     intmath)
1262     triang_signed=2 ;;
1263     diharmonic)
1264     triang_signed=3 ;;
1265     intmathabs)
1266     triang_signed=5 ;;
1267     esac
1268 schoenebeck 714 fi
1269 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1270 schoenebeck 714
1271     if test "$config_unsigned_triang_algo" = "benchmark"; then
1272     echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1273     AC_LANG_CPLUSPLUS
1274     AC_TRY_RUN([
1275     #define SIGNED 0
1276     #define SILENT 1
1277 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1278 schoenebeck 714 ],
1279     triang_unsigned=0,
1280     triang_unsigned=$?,
1281     triang_unsigned=0
1282     )
1283     if test "$triang_unsigned" = "2"; then
1284     config_unsigned_triang_algo="intmath"
1285     echo "integer math"
1286     elif test "$triang_unsigned" = "3"; then
1287     config_unsigned_triang_algo="diharmonic"
1288     echo "di harmonics"
1289 senkov 720 elif test "$triang_unsigned" = "5"; then
1290 schoenebeck 726 config_unsigned_triang_algo="intmathabs"
1291 senkov 720 echo "integer math using abs()"
1292 schoenebeck 714 else
1293     echo "Benchmark of unsigned triangular wave algorithms failed!"
1294     echo "Maybe you are doing cross compilation? In that case you have to select"
1295     echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1296     echo "Call './configure --help' for further information or read configure.in."
1297     exit -1;
1298     fi
1299 schoenebeck 1165 else
1300     case "$config_unsigned_triang_algo" in
1301     intmath)
1302     triang_unsigned=2 ;;
1303     diharmonic)
1304     triang_unsigned=3 ;;
1305     intmathabs)
1306     triang_unsigned=5 ;;
1307     esac
1308 schoenebeck 714 fi
1309 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1310 schoenebeck 714
1311     AC_LANG_RESTORE
1312    
1313    
1314     ###########################################################################
1315 schoenebeck 554 # Create Build Files
1316    
1317 schoenebeck 9 AM_CONFIG_HEADER(config.h)
1318 schoenebeck 697 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1319 schoenebeck 9
1320     AC_LANG_CPLUSPLUS
1321 persson 497
1322     # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1323     # this, the dlfcn.h check in am_prog_libtool may fail.
1324     AC_CHECK_HEADER(stdlib.h)
1325    
1326 schoenebeck 654 AC_OUTPUT( \
1327     Makefile \
1328     man/Makefile \
1329     man/linuxsampler.1 \
1330     src/Makefile \
1331 iliev 1161 src/db/Makefile \
1332 schoenebeck 654 src/network/Makefile \
1333     src/engines/Makefile \
1334     src/engines/gig/Makefile \
1335 iliev 2012 src/engines/sf2/Makefile \
1336     src/engines/sfz/Makefile \
1337 schoenebeck 654 src/engines/common/Makefile \
1338 schoenebeck 1722 src/effects/Makefile \
1339 schoenebeck 1321 src/common/Makefile \
1340 schoenebeck 654 src/testcases/Makefile \
1341     src/drivers/Makefile \
1342     src/drivers/audio/Makefile \
1343     src/drivers/midi/Makefile \
1344 schoenebeck 1375 src/plugins/Makefile \
1345 persson 1777 src/hostplugins/Makefile \
1346     src/hostplugins/dssi/Makefile \
1347     src/hostplugins/lv2/Makefile \
1348     src/hostplugins/vst/Makefile \
1349 iliev 1846 src/hostplugins/au/Makefile \
1350 schoenebeck 654 linuxsampler.spec \
1351     debian/Makefile \
1352     Artwork/Makefile \
1353     scripts/Makefile \
1354     osx/Makefile \
1355 schoenebeck 1175 osx/linuxsampler.xcodeproj/Makefile \
1356 schoenebeck 654 Documentation/Makefile \
1357     Documentation/Engines/Makefile \
1358     Documentation/Engines/gig/Makefile \
1359 schoenebeck 697 linuxsampler.pc \
1360     Doxyfile \
1361 schoenebeck 654 )
1362 schoenebeck 554
1363 schoenebeck 1212 # resolve all nested variables in '${config_plugin_dir}'
1364     # (merely for providing a human readable summary below)
1365     while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1366     config_plugin_dir=`eval echo ${config_plugin_dir}`
1367     done
1368 schoenebeck 554
1369 schoenebeck 1212
1370 schoenebeck 554 ###########################################################################
1371     # Output All Configuration Options
1372    
1373     echo ""
1374     echo "#####################################################################"
1375     echo "# LinuxSampler Configuration #"
1376     echo "#-------------------------------------------------------------------#"
1377 schoenebeck 1876 echo "# Release Version: ${LINUXSAMPLER_RELEASE_MAJOR}.${LINUXSAMPLER_RELEASE_MINOR}.${LINUXSAMPLER_RELEASE_BUILD}"
1378     echo "# LSCP Version: ${LSCP_RELEASE_MAJOR}.${LSCP_RELEASE_MINOR}"
1379     echo "#-------------------------------------------------------------------"
1380 schoenebeck 617 echo "# Assembly Optimizations: ${config_asm}"
1381 schoenebeck 554 echo "# Development Mode: ${config_dev_mode}"
1382     echo "# Debug Level: ${config_debug_level}"
1383     echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1384     echo "# Preload Samples: ${config_preload_samples}"
1385     echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1386     echo "# Maximum Events: ${config_max_events}"
1387     echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1388     echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1389     echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1390     echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1391     echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1392     echo "# Stream Size: ${config_stream_size}"
1393 schoenebeck 1800 echo "# Default Maximum Disk Streams: ${config_max_streams}"
1394     echo "# Default Maximum Voices: ${config_max_voices}"
1395 schoenebeck 738 echo "# Default Subfragment Size: ${config_subfragment_size}"
1396 schoenebeck 1005 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1397 schoenebeck 563 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1398 schoenebeck 714 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1399     echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1400 schoenebeck 554 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1401 schoenebeck 829 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1402     echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1403     echo "# Default Portamento Time: ${config_portamento_time_default} s"
1404 schoenebeck 554 echo "# Force Filter Usage: ${config_force_filter}"
1405     echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1406     echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1407     echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1408     echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1409     echo "# Override Filter Type: ${config_override_filter_type}"
1410 schoenebeck 563 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1411 iliev 716 echo "# Process Muted Channels: ${config_process_muted_channels}"
1412 schoenebeck 849 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1413 schoenebeck 1762 echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
1414 persson 830 echo "# Interpolate Volume: ${config_interpolate_volume}"
1415 schoenebeck 1364 echo "# Instruments database support: ${config_instruments_db}"
1416     if test "$config_instruments_db" = "yes"; then
1417     echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1418     fi
1419 schoenebeck 1212 echo "# Plugin Path: ${config_plugin_dir}"
1420 schoenebeck 1876 echo "#-------------------------------------------------------------------"
1421     echo "# MIDI Input Drivers:"
1422     echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack_midi}, CoreMIDI: ${config_have_coremidi}, MME: ${config_have_mme}, MidiShare: ${config_have_midishare}"
1423     echo "#-------------------------------------------------------------------"
1424     echo "# Audio Output Drivers:"
1425     echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack}, ARTS: ${config_have_arts}, CoreAudio: ${config_have_coreaudio}, ASIO: ${config_have_asio}"
1426     echo "#-------------------------------------------------------------------"
1427 iliev 2012 echo "# Sampler Engines:"
1428     echo "# GIG: yes, SF2: ${config_have_sf2}, SFZ: yes"
1429     echo "#-------------------------------------------------------------------"
1430 schoenebeck 2124 echo "# Effect plugin systems for internal effects:"
1431     echo "# LADSPA: yes"
1432     echo "#-------------------------------------------------------------------"
1433 schoenebeck 1876 echo "# Building sampler as plugin for following host standards:"
1434     echo "# DSSI: ${config_have_dssi}, LV2: ${config_have_lv2}, VST: ${config_have_vst}, AU: ${config_have_au}"
1435 schoenebeck 554 echo "#-------------------------------------------------------------------#"
1436     echo "# Read './configure --help' or file 'configure.in' for details. #"
1437     echo "#####################################################################"
1438     echo ""
1439     echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1440     echo ""

  ViewVC Help
Powered by ViewVC