/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Annotation of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 2365 - (hide annotations) (download)
Sat Sep 8 17:21:38 2012 UTC (11 years, 6 months ago) by persson
File size: 57826 byte(s)
* modernized configure script

1 schoenebeck 697 #------------------------------------------------------------------------------------
2     # LinuxSampler's / liblinuxsampler's "official" release version:
3    
4 persson 2365 m4_define(linuxsampler_release_major, 1)
5     m4_define(linuxsampler_release_minor, 0)
6     m4_define(linuxsampler_release_build, 0.svn18)
7 schoenebeck 697
8 persson 2365
9     AC_INIT([linuxsampler],[linuxsampler_release_major.linuxsampler_release_minor.linuxsampler_release_build])
10     AC_CONFIG_SRCDIR([configure.in])
11    
12 schoenebeck 697 #------------------------------------------------------------------------------------
13     # The following is the libtool / shared library version. This doesn't have to
14     # do anything with the release version. It MUST conform to the following rules:
15     #
16     # 1. Start with version information of `0:0:0' for each libtool library.
17     # 2. Update the version information only immediately before a public release of
18     # your software. More frequent updates are unnecessary, and only guarantee
19     # that the current interface number gets larger faster.
20     # 3. If the library source code has changed at all since the last update, then
21     # increment revision (`c:r:a' becomes `c:r+1:a').
22     # 4. If any interfaces have been added, removed, or changed since the last update,
23     # increment current, and set revision to 0.
24     # 5. If any interfaces have been added since the last public release, then increment
25     # age.
26     # 6. If any interfaces have been removed since the last public release, then set age
27     # to 0.
28    
29 schoenebeck 1956 LIBLINUXSAMPLER_LT_CURRENT=3
30 schoenebeck 697 LIBLINUXSAMPLER_LT_REVISION=0
31 schoenebeck 1956 LIBLINUXSAMPLER_LT_AGE=0
32 schoenebeck 697 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
33    
34 schoenebeck 947 #------------------------------------------------------------------------------------
35     # the LSCP specification version this LinuSampler release complies with:
36    
37     LSCP_RELEASE_MAJOR=1
38 schoenebeck 2024 LSCP_RELEASE_MINOR=5
39 schoenebeck 947
40     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
41     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
42    
43 schoenebeck 1741 AC_PROG_CXX
44 persson 1777 AC_LIBTOOL_WIN32_DLL
45 persson 2365 AC_PROG_LIBTOOL
46 schoenebeck 697
47     AC_SUBST(SHLIB_VERSION_ARG)
48     AC_SUBST(SHARED_VERSION_INFO)
49    
50 persson 2360 module=yes eval LIB_EXT=$shrext_cmds
51     AC_SUBST(LIB_EXT)
52    
53 schoenebeck 12 AC_C_BIGENDIAN
54 persson 1895 AC_CANONICAL_HOST
55 schoenebeck 9
56 schoenebeck 1639 PKG_PROG_PKG_CONFIG
57 schoenebeck 275
58 schoenebeck 554 ###########################################################################
59     # General Checks
60 schoenebeck 275
61 persson 1931 AM_CONDITIONAL(CROSS_COMPILING, test $cross_compiling = yes)
62    
63 schoenebeck 510 AC_MSG_CHECKING([whether x86 architecture])
64 schoenebeck 9 def_arch_x86=0
65 persson 1895 case $host_cpu in
66 persson 1794 "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
67 schoenebeck 9 echo "yes"
68     def_arch_x86=1;;
69     *)
70     echo "no";;
71     esac
72     AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
73    
74 schoenebeck 510 # determine the right gcc switch for CPU specific optimizations
75 schoenebeck 829 # (only if the user did not provide one)
76 schoenebeck 510 CXX_CPU_SWITCH=
77 schoenebeck 829 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
78 persson 1895 if test "$def_arch_x86" = 1 -a "$host_cpu" != "x86_64"; then
79     CXX_CPU_SWITCH="-march=$host_cpu"
80 schoenebeck 909 elif test "$target_cpu" = "ppc"; then
81 persson 1895 CXX_CPU_SWITCH="-arch=$host_cpu"
82 schoenebeck 829 fi
83 schoenebeck 510 fi
84     AC_SUBST([CXX_CPU_SWITCH])
85    
86 persson 2197 mac=no
87     linux=no
88     case "$host" in
89     *-*-darwin*)
90     mac=yes
91     ;;
92     *-*-linux*)
93     linux=yes
94     ;;
95     esac
96     AM_CONDITIONAL(LINUX, test "$linux" = yes)
97     AM_CONDITIONAL(MAC, test "$mac" = yes)
98    
99 senoner 1502 # check if we're on MS Windows
100     AC_CHECK_HEADERS(
101     mmsystem.h,
102     have_windows=1,
103 persson 1895 have_windows=0,
104     [#include <windef.h>]
105 senoner 1502 )
106     AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
107    
108 schoenebeck 288 AC_MSG_CHECKING([whether UNIX98 compatible])
109 persson 2365 AC_LANG_PUSH([C])
110     AC_RUN_IFELSE([AC_LANG_SOURCE([[
111 schoenebeck 288 #ifndef _GNU_SOURCE
112     #define _GNU_SOURCE 1
113     #endif
114     #include <features.h>
115     void main(void) {
116     #if _XOPEN_SOURCE >= 500
117     exit(0); /* UNIX98 compatible */
118     #else
119     exit(-1); /* not UNIX98 compatible */
120     #endif
121     }
122 persson 2365 ]])],
123 schoenebeck 288 have_unix98="yes",
124     have_unix98="no",
125     have_unix98="no"
126     )
127 persson 2365 AC_LANG_POP([C])
128 schoenebeck 288 AC_MSG_RESULT([$have_unix98])
129 persson 2365 if test "$have_unix98" = "no" -a "$have_windows" = "0"; then
130 schoenebeck 288 if test "x$HAVE_UNIX98" = "x"; then
131     echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
132 persson 2365 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run"
133     echo "./configure with environment variable HAVE_UNIX98=1 in case you think you"
134 schoenebeck 288 echo "have a UNIX98 compatible system."
135     exit -1;
136     fi
137     fi
138    
139 wylder 822 # check for <features.h>
140     AC_CHECK_HEADERS(features.h)
141 wylder 821
142 schoenebeck 1454 # test for POSIX thread library
143     m4_ifdef([m4_include(m4/pthread.m4)],,
144     [sinclude([m4/pthread.m4])])
145     ACX_PTHREAD
146     LIBS="$PTHREAD_LIBS $LIBS"
147     CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
148     CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
149     CC="$PTHREAD_CC"
150 schoenebeck 852
151 schoenebeck 1454 # check for a bug in NPTL-enabled glibc
152     # (see Gentoo bug report #194076)
153     AC_ARG_ENABLE(nptl-bug-check,
154     [ --disable-nptl-bug-check
155     Disable check for a bug in certain NPTL-enabled
156     glibc versions that caused crashs.],
157     [config_check_nptl_bug="$enableval"],
158     [config_check_nptl_bug="yes"]
159     )
160     if test "$config_check_nptl_bug" = "yes"; then
161     m4_ifdef([m4_include(m4/nptl_bug.m4)],,
162     [sinclude([m4/nptl_bug.m4])])
163     ACX_NPTL_GLIBC_BUG([
164     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
165     echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
166     echo "probably crash due to this. Please report us the system you are"
167     echo "using and/or file a bug report to the bug tracking system of"
168     echo "your distribution."
169     echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
170     echo "well, you can try to circumvent this problem for now by setting"
171     echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
172     echo "should cause this test to pass."
173     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
174     AC_MSG_ERROR([possibly NPTL glibc bug detected])
175     ])
176     else
177     echo "NPTL glibc bug check disabled"
178     fi
179    
180 schoenebeck 1742 # FIXME: this is actually a dependency of libgig, not of LS directly, why
181     # isn't it hidden by libgig?
182     AC_CHECK_HEADERS(uuid/uuid.h)
183     AC_SEARCH_LIBS(uuid_generate, uuid)
184 schoenebeck 1454
185    
186 schoenebeck 1742
187 schoenebeck 852 ###########################################################################
188 schoenebeck 288 # Checks for available audio and MIDI systems / drivers
189     # (we throw an error if there's not at least one system for audio output and MIDI input available)
190 schoenebeck 852
191 schoenebeck 288 have_midi_input_driver="false"
192     have_audio_output_driver="false"
193    
194 schoenebeck 852 # ALSA
195     AC_ARG_ENABLE(alsa-driver,
196     [ --disable-alsa-driver
197     Disable support for the Advanced Linux Sound
198     Architecture (ALSA).],
199 schoenebeck 1360 [config_alsa_driver="$enableval"],
200 schoenebeck 852 [config_alsa_driver="yes"]
201 schoenebeck 18 )
202 schoenebeck 852 have_alsa=0
203     if test "$config_alsa_driver" = "yes"; then
204     AC_CHECK_HEADER(alsa/asoundlib.h,
205     AC_CHECK_LIB(asound, main,
206     have_alsa=1
207     ,
208     have_alsa=0
209     )
210     ,
211     have_alsa=0
212     )
213     if test "$have_alsa" = "1"; then
214     have_midi_input_driver="true"
215     have_audio_output_driver="true";
216     fi
217    
218     echo -n "checking Alsa version... "
219 persson 2365 AC_LANG_PUSH([C])
220     AC_RUN_IFELSE([AC_LANG_SOURCE([[
221 schoenebeck 852 #include <alsa/asoundlib.h>
222     void main(void) {
223     /* ensure backward compatibility */
224     #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
225     #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
226     #endif
227     exit(SND_LIB_MAJOR);
228     }
229 persson 2365 ]])],
230 schoenebeck 852 alsa_major=0,
231     alsa_major=$?,
232     alsa_major=0
233     )
234 persson 2365 AC_RUN_IFELSE([AC_LANG_SOURCE([[
235 schoenebeck 852 #include <alsa/asoundlib.h>
236     void main(void) {
237     /* ensure backward compatibility */
238     #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
239     #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
240     #endif
241     exit(SND_LIB_MINOR);
242     }
243 persson 2365 ]])],
244 schoenebeck 852 alsa_minor=0,
245     alsa_minor=$?,
246     alsa_minor=0
247     )
248 persson 2365 AC_RUN_IFELSE([AC_LANG_SOURCE([[
249 schoenebeck 852 #include <alsa/asoundlib.h>
250     void main(void) {
251     /* ensure backward compatibility */
252     #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
253     #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
254     #endif
255     exit(SND_LIB_SUBMINOR);
256     }
257 persson 2365 ]])],
258 schoenebeck 852 alsa_subminor=0,
259     alsa_subminor=$?,
260     alsa_subminor=0
261     )
262 persson 2365 AC_LANG_POP([C])
263 schoenebeck 852 echo "$alsa_major.$alsa_minor.$alsa_subminor";
264     AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
265     AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
266     AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
267     else
268     echo "ALSA support disabled by configure script parameter"
269 schoenebeck 18 fi
270 schoenebeck 291 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
271 schoenebeck 288 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
272 schoenebeck 1876 config_have_alsa="no"
273     if test $have_alsa = "1"; then
274     config_have_alsa="yes"
275     fi
276 schoenebeck 18
277 schoenebeck 852 # JACK
278     AC_ARG_ENABLE(jack-driver,
279     [ --disable-jack-driver
280     Disable support for the Jack Audio Connection Kit
281     (JACK).],
282 schoenebeck 1360 [config_jack_driver="$enableval"],
283 schoenebeck 852 [config_jack_driver="yes"]
284 schoenebeck 18 )
285 schoenebeck 852 have_jack=0
286     if test "$config_jack_driver" = "yes"; then
287     PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
288     if test $have_jack = "1"; then
289     AC_SUBST(JACK_LIBS)
290     AC_SUBST(JACK_CFLAGS)
291 persson 1748 linuxsampler_save_LIBS=$LIBS
292     LIBS="$JACK_LIBS $LIBS"
293     AC_CHECK_FUNCS(jack_client_name_size jack_client_open)
294     LIBS=$linuxsampler_save_LIBS
295 schoenebeck 852 have_audio_output_driver="true";
296     fi
297 schoenebeck 33 else
298 schoenebeck 852 echo "JACK support disabled by configure script parameter"
299 schoenebeck 33 fi
300 schoenebeck 852 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
301     AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
302 schoenebeck 1876 config_have_jack="no"
303     if test $have_jack = "1"; then
304     config_have_jack="yes"
305     fi
306 schoenebeck 31
307 persson 1651 # JACK MIDI
308     have_jack_midi=0
309     if test $have_jack = "1"; then
310 persson 1652 linuxsampler_save_CFLAGS=$CFLAGS
311     linuxsampler_save_LIBS=$LIBS
312     CFLAGS="$JACK_CFLAGS $CFLAGS"
313     LIBS="$JACK_LIBS $LIBS"
314     AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
315     if test $have_jack_midi = "1"; then
316     AC_CHECK_FUNCS(jack_midi_get_event_count)
317     AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
318     jack_midi_clear_buffer(0, 0);
319     ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
320     [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
321     have_midi_input_driver="true"
322     fi
323     CFLAGS=$linuxsampler_save_CFLAGS
324     LIBS=$linuxsampler_save_LIBS
325 persson 1651 fi
326     AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
327     AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
328     [Define to 1 if you have JACK with MIDI support installed.])
329 schoenebeck 1876 config_have_jack_midi="no"
330     if test $have_jack_midi = "1"; then
331     config_have_jack_midi="yes"
332     fi
333 persson 1651
334 schoenebeck 838 # ARTS
335 schoenebeck 852 AC_ARG_ENABLE(arts-driver,
336     [ --disable-arts-driver
337     Disable support for the Analogue Realtime System
338     (aRts).],
339 schoenebeck 1360 [config_arts_driver="$enableval"],
340 schoenebeck 852 [config_arts_driver="yes"]
341     )
342     have_arts=0
343     if test "$config_arts_driver" = "yes"; then
344     m4_ifdef([m4_include(m4/arts.m4)],,
345     [sinclude([m4/arts.m4])])
346     AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
347     if test "$have_arts" = "1"; then
348     have_audio_output_driver="true"
349     fi
350     else
351     echo "ARTS support disabled by configure script parameter"
352 schoenebeck 838 fi
353     AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
354     AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
355 schoenebeck 1876 config_have_arts="no"
356     if test $have_arts = "1"; then
357     config_have_arts="yes"
358     fi
359 schoenebeck 838
360 senoner 1502 # ASIO AUDIO (Win32)
361     AC_ARG_ENABLE(asiosdk-dir,
362     [ --enable-asiosdk-dir
363     Directory where the ASIO SDK is located, this automatically
364     enables the compilation of the ASIO audio output driver.],
365     [config_asiosdk_dir="${enableval}"],
366     [config_asiosdk_dir="."]
367     )
368     AC_SUBST(config_asiosdk_dir)
369    
370     AC_ARG_ENABLE(asio-driver,
371     [ --disable-asio-driver
372     Disable support for the Windows ASIO driver.],
373     [config_asio_driver="$enableval"],
374     [config_asio_driver="yes"]
375     )
376     have_asio=0
377     ASIOSDK_BASEDIR=
378     if test "$config_asio_driver" = "yes"; then
379     asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
380     echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
381     if test -e $asiosdk_headerfile ; then
382     echo yes
383     have_asio=1
384     ASIOSDK_BASEDIR="$config_asiosdk_dir"
385     else
386     echo no
387     have_asio=0
388     fi
389     if test "$have_asio" = "1"; then
390     have_audio_output_driver="true"
391     fi
392     else
393     echo "Windows ASIO support disabled by configure script parameter"
394     fi
395     AC_SUBST(ASIOSDK_BASEDIR)
396     AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
397     AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
398 schoenebeck 1876 config_have_asio="no"
399     if test $have_asio = "1"; then
400     config_have_asio="yes"
401     fi
402 senoner 1502
403 schoenebeck 609 # MidiShare (Linux, OS X, Windows)
404 schoenebeck 852 AC_ARG_ENABLE(midishare-driver,
405     [ --disable-midishare-driver
406     Disable support for the MidiShare system.],
407 schoenebeck 1360 [config_midishare_driver="$enableval"],
408 schoenebeck 852 [config_midishare_driver="yes"]
409 schoenebeck 609 )
410 schoenebeck 852 have_midishare=0
411     if test "$config_midishare_driver" = "yes"; then
412     AC_CHECK_HEADER(MidiShare.h,
413     AC_CHECK_LIB(MidiShare, MidiCountEvs,
414     have_midishare=1,
415     have_midishare=0
416     )
417     ,
418     have_midishare=0
419     )
420     if test "$have_midishare" = "1"; then
421     have_midi_input_driver="true"
422     fi
423     else
424     echo "MidiShare support disabled by configure script parameter"
425 schoenebeck 609 fi
426     AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
427     AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
428 schoenebeck 1876 config_have_midishare="no"
429     if test $have_midishare = "1"; then
430     config_have_midishare="yes"
431     fi
432 schoenebeck 609
433     # CoreMIDI (OS X)
434 schoenebeck 852 AC_ARG_ENABLE(coremidi-driver,
435     [ --disable-coremidi-driver
436     Disable support for the Apple CoreMIDI system.],
437 schoenebeck 1360 [config_coremidi_driver="$enableval"],
438 schoenebeck 852 [config_coremidi_driver="yes"]
439 schoenebeck 609 )
440 schoenebeck 852 have_coremidi=0
441     if test "$config_coremidi_driver" = "yes"; then
442     AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
443     have_coremidi=1,
444     have_coremidi=0
445     )
446     if test "$have_coremidi" = "1"; then
447     have_midi_input_driver="true"
448     fi
449     else
450     echo "CoreMIDI support disabled by configure script parameter"
451 schoenebeck 609 fi
452     AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
453     AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
454 schoenebeck 1876 config_have_coremidi="no"
455     if test $have_coremidi = "1"; then
456     config_have_coremidi="yes"
457     fi
458 schoenebeck 609
459 iliev 1829 # CoreAudio (OS X)
460     AC_ARG_ENABLE(coreaudio-driver,
461     [ --disable-coreaudio-driver
462     Disable support for the Apple CoreAudio system.],
463     [config_coreaudio_driver="$enableval"],
464     [config_coreaudio_driver="yes"]
465     )
466     have_coreaudio=0
467     if test "$config_coreaudio_driver" = "yes"; then
468     AC_CHECK_HEADER(CoreAudio/CoreAudio.h,
469     have_coreaudio=1,
470     have_coreaudio=0
471     )
472     if test "$have_coreaudio" = "1"; then
473     have_audio_output_driver="true"
474     fi
475     else
476     echo "CoreAudio support disabled by configure script parameter"
477     fi
478     AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1")
479     AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.])
480 schoenebeck 1876 config_have_coreaudio="no"
481     if test $have_coreaudio = "1"; then
482     config_have_coreaudio="yes"
483     fi
484 iliev 1829
485 senoner 1502 # MME MIDI (Win32)
486     AC_ARG_ENABLE(mmemidi-driver,
487     [ --disable-mmemidi-driver
488     Disable support for the Windows MME MIDI system.],
489     [config_mmemidi_driver="$enableval"],
490     [config_mmemidi_driver="yes"]
491     )
492     have_mmemidi=0
493     if test "$config_mmemidi_driver" = "yes"; then
494     AC_CHECK_HEADERS(mmsystem.h,
495     have_mmemidi=1,
496     have_mmemidi=0
497     )
498     if test "$have_mmemidi" = "1"; then
499     have_midi_input_driver="true"
500     fi
501     else
502     echo "MME MIDI support disabled by configure script parameter"
503     fi
504     AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
505     AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
506 schoenebeck 1876 config_have_mme="no"
507     if test $have_mmemidi = "1"; then
508     config_have_mme="yes"
509     fi
510 senoner 1502
511 persson 1777 # DSSI
512     AC_CHECK_HEADERS(dssi.h,
513 schoenebeck 1876 config_have_dssi="yes",
514     config_have_dssi="no")
515     AM_CONDITIONAL(HAVE_DSSI, test $config_have_dssi = "yes")
516 persson 1777
517     # LV2
518 persson 2356 PKG_CHECK_MODULES(LV2, lv2 >= 1.0.0, config_have_lv2="yes", config_have_lv2="no")
519 persson 2343 AC_SUBST(LV2_CFLAGS)
520     AC_SUBST(LV2_LIBS)
521 schoenebeck 1876 AM_CONDITIONAL(HAVE_LV2, test $config_have_lv2 = "yes")
522 persson 1777
523     # VST
524     AC_ARG_ENABLE(vstsdk-dir,
525     [ --enable-vstsdk-dir
526     Directory where the VST SDK is located.
527     This automatically enables the compilation
528     of the VST plugin.],
529     [VSTSDK_DIR="${enableval}"],
530     [VSTSDK_DIR=]
531     )
532     AC_SUBST(VSTSDK_DIR)
533     AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
534 schoenebeck 1876 config_have_vst="no"
535     if test "x$VSTSDK_DIR" != "x"; then
536     config_have_vst="yes"
537     fi
538 persson 1777
539 iliev 1846 # AU
540     AC_CHECK_HEADERS(AudioUnit/AudioUnit.h,
541 schoenebeck 1876 config_have_au="yes",
542     config_have_au="no")
543     AM_CONDITIONAL(HAVE_AU, test $config_have_au = "yes")
544 iliev 1855 AM_CONDITIONAL(HAVE_AUFLAGS, test "$AUFLAGS" != "")
545 persson 1777
546 persson 2183 if test $config_have_au = "yes" ; then
547     if test "x$DEVELOPER_EXTRAS_DIR" = "x" ; then
548     if test -d /Developer/Extras ; then
549     DEVELOPER_EXTRAS_DIR=/Developer/Extras
550     else
551     DEVELOPER_EXTRAS_DIR=/Developer/Examples
552     fi
553     fi
554     AC_SUBST(DEVELOPER_EXTRAS_DIR)
555     fi
556 iliev 1846
557 persson 2203 if test "x$MAC_PLUGIN_INSTALL_DIR" = "x" ; then
558     MAC_PLUGIN_INSTALL_DIR=/Library/Audio/Plug-Ins
559     fi
560     AC_SUBST(MAC_PLUGIN_INSTALL_DIR)
561    
562 schoenebeck 1364 # have we found at least one MIDI input and one audio output driver ?
563     if test "$have_midi_input_driver" = "false"; then
564     echo "No supported MIDI input system found!"
565     echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
566 persson 1652 echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
567 schoenebeck 1364 echo "If you think you have one of those available on your system, make sure you"
568     echo "also have the respective development (header) files installed."
569     exit -1;
570     fi
571     if test "$have_audio_output_driver" = "false"; then
572     echo "No supported audio output system found!"
573 persson 1652 echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
574 schoenebeck 1364 echo "driver at the moment!"
575     exit -1;
576     fi
577    
578    
579    
580     ###########################################################################
581     # Checks for various DLL libraries
582    
583 schoenebeck 504 # Check presence of libgig
584 schoenebeck 1956 libgig_version="3.3.0"
585 schoenebeck 504 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
586     if test "$HAVE_GIG" = "false"; then
587     echo "Required libgig version not found!"
588     echo "You need to have libgig version ${libgig_version} installed!"
589     exit -1;
590 schoenebeck 714 else
591     echo "yes, found libgig $libgig_version"
592 schoenebeck 504 fi
593     AC_SUBST(GIG_CFLAGS)
594     AC_SUBST(GIG_LIBS)
595    
596 iliev 2018 # SF2 Engine (requires libgig)
597 iliev 2012 AC_ARG_ENABLE(sf2-engine,
598     [ --disable-sf2-engine
599     Disable compilation of the SF2 engine.
600 iliev 2018 You need to have libgig installed.],
601 iliev 2012 [config_sf2_engine="$enableval"],
602     [config_sf2_engine="yes"]
603     )
604     HAVE_SF2=0;
605     if test "$config_sf2_engine" = "yes"; then
606 iliev 2018 HAVE_SF2=1
607 iliev 2012 else
608     echo "SF2 engine disabled by configure script parameter"
609     fi
610     AM_CONDITIONAL(HAVE_SF2, test $HAVE_SF2 = 1)
611     AC_DEFINE_UNQUOTED(HAVE_SF2,$HAVE_SF2,[Define to 1 if you want SF2 engine and have libsf2 installed.])
612     config_have_sf2="no"
613     if test $HAVE_SF2 = "1"; then
614     config_have_sf2="yes"
615     fi
616    
617     # Check presence of libsndfile
618     libsndfile_version="1.0"
619     PKG_CHECK_MODULES(SNDFILE, sndfile >= $libsndfile_version, HAVE_SNDFILE=true, HAVE_SNDFILE=false)
620     if test "$HAVE_SNDFILE" = "false"; then
621     echo "Required libsndfile version not found!"
622     echo "You need to have libsndfile version ${libsndfile_version} installed!"
623     exit -1;
624     else
625     echo "yes, found libsndfile $libsndfile_version"
626     fi
627     AC_SUBST(SNDFILE_CFLAGS)
628     AC_SUBST(SNDFILE_LIBS)
629    
630 persson 2119 # Check for Vorbis support in libsndfile
631     linuxsampler_save_CFLAGS=$CFLAGS
632     CFLAGS="$SNDFILE_CFLAGS $CFLAGS"
633 persson 2343 AC_CHECK_DECLS([SF_FORMAT_VORBIS], [], [], [[#include <sndfile.h>]])
634 persson 2167
635     # Check for loop functionality in libsndfile
636     AC_CHECK_MEMBERS([SF_INSTRUMENT.loops],,
637     [AC_MSG_WARN([Your version of libsndfile does not support
638     reading of loop information. LinuxSampler will not be able to
639     extract loop information from sample files.])],
640     [#include <sndfile.h>])
641 persson 2119 CFLAGS=$linuxsampler_save_CFLAGS
642    
643 schoenebeck 1364 # Instruments DB feature (requires SQLite 3.3)
644     AC_ARG_ENABLE(instruments-db,
645     [ --disable-instruments-db
646     Disable compilation of the sampler's instruments
647     database feature. You need to have SQLite 3.3
648     or younger installed for this feature.],
649     [config_instruments_db="$enableval"],
650     [config_instruments_db="yes"]
651     )
652     HAVE_SQLITE3=0;
653     if test "$config_instruments_db" = "yes"; then
654     # Check presence of sqlite3
655     sqlite_version="3.3"
656     PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
657     AC_SUBST(SQLITE3_LIBS)
658     AC_SUBST(SQLITE3_CFLAGS)
659     if test $HAVE_SQLITE3 = false; then
660     HAVE_SQLITE3=0
661     config_instruments_db="no"
662     echo "*** Required sqlite version not found!"
663     echo "*** You need to have sqlite version ${sqlite_version} or higher"
664     echo "*** for instruments database support to be enabled."
665     echo "*** Support for instruments DB will be disabled!"
666     else
667     HAVE_SQLITE3=1
668     fi
669 senkov 397 else
670 schoenebeck 1364 echo "Instruments DB feature disabled by configure script parameter"
671 senkov 397 fi
672     AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
673 schoenebeck 1364 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
674 schoenebeck 31
675 schoenebeck 288
676    
677 schoenebeck 554 ###########################################################################
678     # Handle Configuration Options
679    
680     # TODO: should we use AC_ARG_VAR(variable, description) instead?
681    
682 schoenebeck 617 AC_ARG_ENABLE(asm,
683 schoenebeck 1259 [ --disable-asm
684 schoenebeck 738 Enable hand-crafted assembly optimizations
685 schoenebeck 1259 (default=on). LinuxSampler provides CPU specific
686     assembly optimizations. This is currently limited
687     to just enter a fast (denormal) FPU mode on x86
688     platforms. There are currently no synthesis core
689     assembly optimizations anymore since LS 0.4.0],
690 schoenebeck 1360 [config_asm="$enableval"],
691 schoenebeck 1259 [config_asm="yes"]
692 schoenebeck 617 )
693     if test "$config_asm" = "yes"; then
694 schoenebeck 1259 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
695 schoenebeck 617 fi
696    
697 schoenebeck 554 AC_ARG_ENABLE(dev-mode,
698 schoenebeck 1424 [ --enable-dev-mode
699     Enable development mode (default=off). In that mode
700 schoenebeck 554 we do some extra sanity checks here and there.
701     This helps to spot possible problems, but reduces
702     efficiency a bit],
703 schoenebeck 1360 [config_dev_mode="$enableval"],
704 schoenebeck 1424 [config_dev_mode="no"]
705 schoenebeck 554 )
706     if test "$config_dev_mode" = "yes"; then
707     AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
708     fi
709    
710     AC_ARG_ENABLE(debug-level,
711     [ --enable-debug-level
712     Specify verbosity of console messages (default=1).
713     The higher the value, the higher will be verbosity.
714     A value of 0 means no console output at all.
715     There's not really an upper limit but the usual
716     level of all messages is currently somewhere less
717     than 10.],
718     [config_debug_level="${enableval}"],
719     [config_debug_level="1"]
720     )
721     AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
722    
723     AC_ARG_ENABLE(rt-exceptions,
724     [ --enable-rt-exceptions
725     Enable exceptions in the realtime thread
726     (default=no). If this is enabled, exceptions will
727     be thrown on critical errors in the realtime
728     context as well. Otherwise if disabled
729     segmentation faults will be forced by the
730     application on critical errors.],
731 schoenebeck 1360 [config_rt_exceptions="$enableval"],
732 schoenebeck 554 [config_rt_exceptions="no"]
733     )
734     if test "$config_rt_exceptions" = "yes"; then
735     AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
736     fi
737    
738 persson 2197 config_pthread_testcancel="$mac"
739 nagata 1649 AC_ARG_ENABLE(pthread-testcancel,
740     [ --enable-pthread-testcancel
741 persson 2185 Enable pthread_testcancel() calls and avoid
742     asynchronous cancel of pthreads (default=yes
743     for Mac targets, no otherwise).],
744 nagata 1649 [config_pthread_testcancel="$enableval"],
745 persson 2343 [])
746 nagata 1649 if test "$config_pthread_testcancel" = "yes"; then
747     AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
748     fi
749    
750 schoenebeck 554 AC_ARG_ENABLE(preload-samples,
751     [ --enable-preload-samples
752     Due to seeking and latency issues with hard drives
753     we have to cache a small part of samples' head in
754     RAM (default=32768). The higher this value the
755     more memory will be occupied for each sample, but
756     the safer this will be in regards of possible
757     droputs. A 'good' value depends on the running
758     system and usage dependant factors.],
759     [config_preload_samples="${enableval}"],
760     [config_preload_samples="32768"]
761     )
762     AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
763    
764     AC_ARG_ENABLE(max-pitch,
765     [ --enable-max-pitch
766     Specify the maximum allowed pitch value in octaves
767     (default=4). To lower memory usage you might want
768     set a smaller value.],
769     [config_max_pitch="${enableval}"],
770     [config_max_pitch="4"]
771     )
772     AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
773    
774     AC_ARG_ENABLE(max-events,
775     [ --enable-max-events
776     Specify the maximum allowed amount of events to be
777     processed per fragment (default=1024).],
778     [config_max_events="${enableval}"],
779     [config_max_events="1024"]
780     )
781     AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
782    
783     AC_ARG_ENABLE(eg-bottom,
784     [ --enable-eg-bottom
785     Bottom limit of envelope generators
786     (default=0.001). Certain kinds of curve types like
787     exponential curves converge against 0 but never
788     reach 0. So we have to define a certain low value
789     after which we should consider all smaller values
790     to be 'almost zero'. The smaller this value, the
791     longer will voices survive in EG's release stage
792     and thus waste voices. If this value is too high
793     will cause click sounds though.],
794     [config_eg_bottom="${enableval}"],
795     [config_eg_bottom="0.001"]
796     )
797     AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
798    
799     AC_ARG_ENABLE(eg-min-release-time,
800     [ --enable-eg-min-release-time
801     Specify the lowest allowed release time in seconds
802     (default=0.0025). This value will also be used to
803     ramp down voices on voice stealing. This value
804     should always be less than the period time of the
805     used audio driver, as in case of voice stealing
806     the killed voice needs to be completely ramped
807     down in the same fragment.],
808     [config_eg_min_release_time="${enableval}"],
809     [config_eg_min_release_time="0.0025"]
810     )
811     AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
812    
813     AC_ARG_ENABLE(refill-streams,
814     [ --enable-refill-streams
815     Number of streams that should be refilled in each
816     disk thread cycle (default=4).],
817     [config_refill_streams="${enableval}"],
818     [config_refill_streams="4"]
819     )
820     AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
821    
822     AC_ARG_ENABLE(stream-min-refill,
823     [ --enable-stream-min-refill
824     Minimum refill size for disk streams (default=1024).
825     The disk thread will go to sleep for a while if no
826     stream had to be refilled more than this value in
827     a disk thread cycle.],
828     [config_stream_min_refill="${enableval}"],
829     [config_stream_min_refill="1024"]
830     )
831     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
832    
833     AC_ARG_ENABLE(stream-max-refill,
834     [ --enable-stream-max-refill
835     Maximum refill size for disk streams
836     (default=65536). The disk thread will refill
837     each stream only by a size of this value per
838     disk thread cycle.],
839     [config_stream_max_refill="${enableval}"],
840     [config_stream_max_refill="65536"]
841     )
842     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
843    
844     AC_ARG_ENABLE(stream-size,
845     [ --enable-stream-size
846     Size of each stream's ring buffer in sample points
847     (default=262144).],
848     [config_stream_size="${enableval}"],
849     [config_stream_size="262144"]
850     )
851     AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
852    
853     AC_ARG_ENABLE(max-streams,
854     [ --enable-max-streams
855 schoenebeck 1800 Initial maximum amount of disk streams
856     (default=90). This value can be changed at
857     runtime. It should always be higher than the
858     maximum amount of voices.],
859 schoenebeck 554 [config_max_streams="${enableval}"],
860     [config_max_streams="90"]
861     )
862 schoenebeck 1800 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
863 schoenebeck 554
864     AC_ARG_ENABLE(max-voices,
865     [ --enable-max-voices
866 schoenebeck 1800 Initial maximum amount of voices (default=64).
867     This value can be changed at runtime. It should
868     always be lower than the maximum amount of disk
869     streams.],
870 schoenebeck 554 [config_max_voices="${enableval}"],
871     [config_max_voices="64"]
872     )
873 schoenebeck 1800 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
874 schoenebeck 554
875 schoenebeck 738 AC_ARG_ENABLE(subfragment-size,
876     [ --enable-subfragment-size
877     Every audio fragment will be splitted into
878     subfragments. Where each subfragment renders
879     audio with constant synthesis parameters. This is
880     done for efficiency reasons. This parameter
881     defines the default size of a subfragment in
882     sample points. A large value means less CPU time
883     whereas a low value means better audio quality
884     (default=32).],
885     [config_subfragment_size="${enableval}"],
886     [config_subfragment_size="32"]
887     )
888     AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
889    
890 schoenebeck 1005 AC_ARG_ENABLE(global-attenuation-default,
891     [ --enable-global-attenuation-default
892 schoenebeck 781 To prevent clipping all samples will be lowered
893 schoenebeck 1005 in amplitude by this given default factor (can
894     be overridden at runtime).
895 schoenebeck 781 (default=0.35)],
896 schoenebeck 1005 [config_global_attenuation_default="${enableval}"],
897     [config_global_attenuation_default="0.35"]
898 schoenebeck 781 )
899 schoenebeck 1005 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
900 schoenebeck 781
901 schoenebeck 554 AC_ARG_ENABLE(voice-steal-algo,
902     [ --enable-voice-steal-algo
903     Voice stealing algorithm to be used. Currently
904     available options:
905     none:
906     Disable voice stealing completely.
907 schoenebeck 563 oldestvoiceonkey (default):
908 schoenebeck 554 Try to kill a voice on the same key first,
909     if no success, proceed with the oldest key.
910 schoenebeck 563 oldestkey:
911 schoenebeck 554 Try to kill a voice from the oldest active
912     key.],
913     [ if test ! "(" "${enableval}" = "none" \
914     -o "${enableval}" = "oldestvoiceonkey" \
915     -o "${enableval}" = "oldestkey" ")" ; then
916     AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
917     else
918     config_voice_steal_algo="${enableval}"
919 schoenebeck 579 fi
920 schoenebeck 554 ],
921 schoenebeck 563 [config_voice_steal_algo="oldestvoiceonkey"]
922 schoenebeck 554 )
923     AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
924    
925     AC_ARG_ENABLE(sysex-buffer-size,
926     [ --enable-sysex-buffer-size
927     System Exclusive Message buffer size in kB
928     (default=2048).],
929     [config_sysex_buffer_size="${enableval}"],
930     [config_sysex_buffer_size="2048"]
931     )
932     AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
933    
934     AC_ARG_ENABLE(force-filter,
935     [ --enable-force-filter
936     If enabled will force filter to be used even if
937     no usage was define in instrument patch files.
938     (default=no).],
939 schoenebeck 1360 [config_force_filter="$enableval"],
940 schoenebeck 554 [config_force_filter="no"]
941     )
942     if test "$config_force_filter" = "yes"; then
943     AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
944     fi
945    
946     AC_ARG_ENABLE(filter-cutoff-min,
947     [ --enable-filter-cutoff-min
948     Minimum filter cutoff frequency in Hz
949     (default=100.0).],
950     [config_filter_cutoff_min="${enableval}"],
951     [config_filter_cutoff_min="100.0"]
952     )
953     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
954    
955     AC_ARG_ENABLE(filter-cutoff-max,
956     [ --enable-filter-cutoff-max
957     Maximum filter cutoff frequency in Hz
958     (default=10000.0).],
959     [config_filter_cutoff_max="${enableval}"],
960     [config_filter_cutoff_max="10000.0"]
961     )
962     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
963    
964     AC_ARG_ENABLE(override-cutoff-ctrl,
965     [ --enable-override-cutoff-ctrl
966     Override filter cutoff MIDI controller (default=no).
967     Note: you have to define the MIDI controller number
968     here, it's not a boolean parameter type! If this
969     option is used, controller number given by
970     instrument patch will be ignored and instead this
971     supplied value will be used.],
972     [config_override_cutoff_ctrl="${enableval}"],
973     [config_override_cutoff_ctrl="no"]
974     )
975     if test ! "$config_override_cutoff_ctrl" = "no"; then
976     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
977     fi
978    
979     AC_ARG_ENABLE(override-resonance-ctrl,
980     [ --enable-override-resonance-ctrl
981     Override filter resonance MIDI controller
982     (default=no). Note: you have to define the MIDI
983     controller number here, it's not a boolean
984     parameter type! If this option is used, controller
985     number given by instrument patch will be ignored
986     and instead this supplied value will be used.],
987     [config_override_resonance_ctrl="${enableval}"],
988     [config_override_resonance_ctrl="no"]
989     )
990     if test ! "$config_override_resonance_ctrl" = "no"; then
991     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
992     fi
993    
994     AC_ARG_ENABLE(override-filter-type,
995     [ --enable-override-filter-type
996     Override filter type (default=no). Options:
997     hp: for highpass
998     bp: for bandpass
999     br: for bandreject
1000     lp: for lowpass
1001     lpt: for lowpass turbo],
1002     [ if test "${enableval}" = "hp" ; then
1003     config_override_filter_type="::gig::vcf_type_highpass"
1004     elif test "${enableval}" = "bp" ; then
1005     config_override_filter_type="::gig::vcf_type_bandpass"
1006     elif test "${enableval}" = "br" ; then
1007     config_override_filter_type="::gig::vcf_type_bandreject"
1008     elif test "${enableval}" = "lp" ; then
1009     config_override_filter_type="::gig::vcf_type_lowpass"
1010     elif test "${enableval}" = "lpt" ; then
1011     config_override_filter_type="::gig::vcf_type_lowpassturbo"
1012     elif test ! "${enableval}" = "no"; then
1013     AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
1014 schoenebeck 579 fi
1015 schoenebeck 554 ],
1016     [config_override_filter_type="no"]
1017     )
1018     if test ! "$config_override_filter_type" = "no"; then
1019     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
1020     fi
1021    
1022 schoenebeck 563 AC_ARG_ENABLE(gs-checksum,
1023     [ --enable-gs-checksum
1024     Enable Roland General Synth SysEx checksum check
1025     (default=no). If this is enabled, all GS SysEx
1026     messages which do not provide a correct checksum
1027     will be ignored. This is disabled by default as
1028     not all devices honor GS checksums.],
1029 schoenebeck 1360 [config_assert_gs_sysex_checksum="$enableval"],
1030 schoenebeck 563 [config_assert_gs_sysex_checksum="no"]
1031     )
1032     if test "config_assert_gs_sysex_checksum" = "yes"; then
1033     AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
1034     fi
1035    
1036 schoenebeck 829 AC_ARG_ENABLE(portamento-time-min,
1037     [ --enable-portamento-time-min
1038     Minimum Portamento time in seconds
1039     (default=0.1).],
1040     [config_portamento_time_min="${enableval}"],
1041     [config_portamento_time_min="0.1"]
1042     )
1043     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
1044    
1045     AC_ARG_ENABLE(portamento-time-max,
1046     [ --enable-portamento-time-max
1047     Maximum Portamento time in seconds
1048     (default=32).],
1049     [config_portamento_time_max="${enableval}"],
1050     [config_portamento_time_max="32"]
1051     )
1052     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
1053    
1054     AC_ARG_ENABLE(portamento-time-default,
1055     [ --enable-portamento-time-default
1056     Default Portamento time in seconds
1057     (default=1).],
1058     [config_portamento_time_default="${enableval}"],
1059     [config_portamento_time_default="1"]
1060     )
1061     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
1062    
1063 schoenebeck 714 AC_ARG_ENABLE(signed-triang-algo,
1064     [ --enable-signed-triang-algo
1065     Signed triangular wave algorithm to be used (e.g. for LFOs).
1066     Currently available options:
1067     intmath:
1068     Uses integer math without any branch will then be
1069     converted to floating point value for each sample point.
1070     This int->float conversion might hurt on some systems.
1071 senkov 720 intmathabs:
1072     Similar to intmath but uses abs() function.
1073     Depending on compiler and platrofm this could
1074     perform better than integer math as it avoids
1075 schoenebeck 1360 an extra integer multiply instruction.
1076 schoenebeck 714 diharmonic:
1077     The triangular wave will be approximated by adding two
1078     sinusoidials. This solution might especially hurt on
1079     systems with weak floating point unit.
1080     benchmark (default):
1081     This is not an algorithm. Use this option if the
1082     appropriate algorithm should be automatically
1083     chosen by the configure script by performing a
1084     benchmark between the algorithms mentioned above.
1085     This will NOT work for cross compilation!],
1086     [ if test ! "(" "${enableval}" = "intmath" \
1087 senkov 720 -o "${enableval}" = "intmathabs" \
1088 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
1089     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
1090     else
1091     config_signed_triang_algo="${enableval}"
1092     fi
1093     ],
1094     [config_signed_triang_algo="benchmark"]
1095     )
1096 schoenebeck 563
1097 schoenebeck 714 AC_ARG_ENABLE(unsigned-triang-algo,
1098     [ --enable-unsigned-triang-algo
1099     Unsigned triangular wave algorithm to be used (e.g. for LFOs).
1100     Currently available options:
1101     intmath:
1102     Uses integer math without any branch will then be
1103     converted to floating point value for each sample point.
1104     This int->float conversion might hurt on some systems.
1105 senkov 720 intmathabs:
1106     Similar to intmath but uses abs() function.
1107     Depending on compiler and platrofm this could
1108     perform better than integer math as it avoids
1109 schoenebeck 1360 an extra integer multiply instruction.
1110 schoenebeck 714 diharmonic:
1111     The triangular wave will be approximated by adding two
1112     sinusoidials. This solution might especially hurt on
1113     systems with weak floating point unit.
1114     benchmark (default):
1115     This is not an algorithm. Use this option if the
1116     appropriate algorithm should be automatically
1117     chosen by the configure script by performing a
1118     benchmark between the algorithms mentioned above.
1119     This will NOT work for cross compilation!],
1120     [ if test ! "(" "${enableval}" = "intmath" \
1121 senkov 720 -o "${enableval}" = "intmathabs" \
1122 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
1123     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
1124     else
1125     config_unsigned_triang_algo="${enableval}"
1126     fi
1127     ],
1128     [config_unsigned_triang_algo="benchmark"]
1129     )
1130    
1131 iliev 716 AC_ARG_ENABLE(process-muted-channels,
1132     [ --enable-process-muted-channels
1133     Enable processing of muted channels (default=no).
1134     In that mode all MIDI events in the muted channels
1135     will be processed. This will provide information
1136     about the active voices in the muted channels and
1137     will not discard notes, triggered in mute mode,
1138     when the channel is unmuted. But also will reduce
1139     the efficiency.],
1140 schoenebeck 1360 [config_process_muted_channels="$enableval"],
1141 iliev 716 [config_process_muted_channels="no"]
1142     )
1143     if test "$config_process_muted_channels" = "yes"; then
1144     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
1145     fi
1146 schoenebeck 714
1147 schoenebeck 849 AC_ARG_ENABLE(process-all-notes-off,
1148     [ --disable-process-all-notes-off
1149     Disable interpretation of All-Notes-Off MIDI
1150     messages (default=on). By default LS will release
1151     all voices whenever it receives an All-Notes-Off
1152     MIDI message. You can disable this behavior, so
1153     that LS simply ignores such messages.],
1154 schoenebeck 1360 [config_process_all_notes_off="$enableval"],
1155 schoenebeck 849 [config_process_all_notes_off="yes"]
1156     )
1157     if test "$config_process_all_notes_off" = "yes"; then
1158     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
1159     fi
1160    
1161 persson 830 AC_ARG_ENABLE(interpolate-volume,
1162     [ --disable-interpolate-volume
1163     Disable interpolation of volume modulation
1164     (default=on). With this enabled, the volume changes
1165     generated by for example the envelope generator
1166     will be smoother, minimizing the risk for audio
1167     clicks. Disable it to reduce CPU usage.],
1168 schoenebeck 1360 [config_interpolate_volume="$enableval"],
1169 persson 830 [config_interpolate_volume="yes"]
1170     )
1171     if test "$config_interpolate_volume" = "yes"; then
1172     AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
1173     fi
1174 iliev 716
1175 schoenebeck 1762 AC_ARG_ENABLE(master-volume-sysex-by-port,
1176     [ --enable-master-volume-sysex-by-port
1177     Whether global volume sysex message should be
1178     applied globally to the whole sampler or only to
1179     the sampler channels connected to the same MIDI
1180     input port on which the sysex message arrived on.
1181     By default global volume sysex messages apply
1182     globally to the whole sampler, since many MIDI
1183     devices behave that way.],
1184     [config_master_volume_sysex_by_port="$enableval"],
1185     [config_master_volume_sysex_by_port="no"]
1186     )
1187     if test "$config_master_volume_sysex_by_port" = "yes"; then
1188     AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
1189     fi
1190    
1191 schoenebeck 1212 AC_ARG_ENABLE(plugin-dir,
1192     [ --enable-plugin-dir
1193     Directory where the sampler shall look for potential plugins,
1194     that is 3rd party shared libraries that should be loaded by
1195     the sampler on startup. By default the sampler will search
1196     for plugins in the subdirectory "plugins" below its own
1197     library directory.
1198     (i.e. /usr/local/lib/linuxsampler/plugins)],
1199     [config_plugin_dir="${enableval}"],
1200     [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1201     )
1202     AC_SUBST(config_plugin_dir)
1203 persson 830
1204 schoenebeck 1364 AC_ARG_ENABLE(default-instruments-db-location,
1205     [ --enable-default-instruments-db-location
1206     Only when instruments DB feature is enabled: file name
1207     which shall be taken as default location of the
1208     instruments DB file. This location can still be
1209     overridden at runtime with a command line switch.
1210     (default: /var/lib/linuxsampler/instruments.db)],
1211     [config_default_instruments_db_file="${enableval}"],
1212     [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1213     )
1214     AC_DEFINE_UNQUOTED(
1215     CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1216     "$config_default_instruments_db_file",
1217     [Only when instruments DB feature is enabled: default location of the DB file.]
1218     )
1219 schoenebeck 1432 AC_SUBST(config_default_instruments_db_file)
1220 schoenebeck 1212
1221 schoenebeck 1364
1222 schoenebeck 554 ###########################################################################
1223 schoenebeck 714 # Automatic Benchmarks (to detect the best algorithms for the system)
1224    
1225     if test "$config_signed_triang_algo" = "benchmark"; then
1226     echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1227 persson 2365 AC_LANG_PUSH([C++])
1228     AC_RUN_IFELSE([AC_LANG_SOURCE([[
1229 schoenebeck 714 #define SIGNED 1
1230     #define SILENT 1
1231 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1232 persson 2365 ]])],
1233 schoenebeck 714 triang_signed=0,
1234     triang_signed=$?,
1235     triang_signed=0
1236     )
1237 persson 2365 AC_LANG_POP([C++])
1238 schoenebeck 714 if test "$triang_signed" = "2"; then
1239     config_signed_triang_algo="intmath"
1240     echo "integer math"
1241     elif test "$triang_signed" = "3"; then
1242     config_signed_triang_algo="diharmonic"
1243     echo "di harmonics"
1244 senkov 720 elif test "$triang_signed" = "5"; then
1245     config_signed_triang_algo="intmathabs"
1246     echo "integer math using abs()"
1247 schoenebeck 714 else
1248     echo "Benchmark of signed triangular wave algorithms failed!"
1249     echo "Maybe you are doing cross compilation? In that case you have to select"
1250     echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1251     echo "Call './configure --help' for further information or read configure.in."
1252     exit -1;
1253     fi
1254 schoenebeck 1165 else
1255     case "$config_signed_triang_algo" in
1256     intmath)
1257     triang_signed=2 ;;
1258     diharmonic)
1259     triang_signed=3 ;;
1260     intmathabs)
1261     triang_signed=5 ;;
1262     esac
1263 schoenebeck 714 fi
1264 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1265 schoenebeck 714
1266     if test "$config_unsigned_triang_algo" = "benchmark"; then
1267     echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1268 persson 2365 AC_LANG_PUSH([C++])
1269     AC_RUN_IFELSE([AC_LANG_SOURCE([[
1270 schoenebeck 714 #define SIGNED 0
1271     #define SILENT 1
1272 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1273 persson 2365 ]])],
1274 schoenebeck 714 triang_unsigned=0,
1275     triang_unsigned=$?,
1276     triang_unsigned=0
1277     )
1278 persson 2365 AC_LANG_POP([C++])
1279 schoenebeck 714 if test "$triang_unsigned" = "2"; then
1280     config_unsigned_triang_algo="intmath"
1281     echo "integer math"
1282     elif test "$triang_unsigned" = "3"; then
1283     config_unsigned_triang_algo="diharmonic"
1284     echo "di harmonics"
1285 senkov 720 elif test "$triang_unsigned" = "5"; then
1286 schoenebeck 726 config_unsigned_triang_algo="intmathabs"
1287 senkov 720 echo "integer math using abs()"
1288 schoenebeck 714 else
1289     echo "Benchmark of unsigned triangular wave algorithms failed!"
1290     echo "Maybe you are doing cross compilation? In that case you have to select"
1291     echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1292     echo "Call './configure --help' for further information or read configure.in."
1293     exit -1;
1294     fi
1295 schoenebeck 1165 else
1296     case "$config_unsigned_triang_algo" in
1297     intmath)
1298     triang_unsigned=2 ;;
1299     diharmonic)
1300     triang_unsigned=3 ;;
1301     intmathabs)
1302     triang_unsigned=5 ;;
1303     esac
1304 schoenebeck 714 fi
1305 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1306 schoenebeck 714
1307    
1308     ###########################################################################
1309 schoenebeck 554 # Create Build Files
1310    
1311 persson 2365 AC_CONFIG_HEADERS([config.h])
1312     AM_INIT_AUTOMAKE
1313 schoenebeck 9
1314 persson 2365 AC_LANG([C++])
1315 persson 497
1316     # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1317     # this, the dlfcn.h check in am_prog_libtool may fail.
1318     AC_CHECK_HEADER(stdlib.h)
1319    
1320 persson 2365 AC_CONFIG_FILES([\
1321 schoenebeck 654 Makefile \
1322     man/Makefile \
1323     man/linuxsampler.1 \
1324     src/Makefile \
1325 iliev 1161 src/db/Makefile \
1326 schoenebeck 654 src/network/Makefile \
1327     src/engines/Makefile \
1328     src/engines/gig/Makefile \
1329 iliev 2012 src/engines/sf2/Makefile \
1330     src/engines/sfz/Makefile \
1331 schoenebeck 654 src/engines/common/Makefile \
1332 schoenebeck 1722 src/effects/Makefile \
1333 schoenebeck 1321 src/common/Makefile \
1334 schoenebeck 654 src/testcases/Makefile \
1335     src/drivers/Makefile \
1336     src/drivers/audio/Makefile \
1337     src/drivers/midi/Makefile \
1338 schoenebeck 1375 src/plugins/Makefile \
1339 persson 1777 src/hostplugins/Makefile \
1340     src/hostplugins/dssi/Makefile \
1341     src/hostplugins/lv2/Makefile \
1342 persson 2360 src/hostplugins/lv2/manifest.ttl \
1343 persson 1777 src/hostplugins/vst/Makefile \
1344 iliev 1846 src/hostplugins/au/Makefile \
1345 schoenebeck 654 linuxsampler.spec \
1346     debian/Makefile \
1347     Artwork/Makefile \
1348     scripts/Makefile \
1349     osx/Makefile \
1350 schoenebeck 1175 osx/linuxsampler.xcodeproj/Makefile \
1351 schoenebeck 654 Documentation/Makefile \
1352     Documentation/Engines/Makefile \
1353     Documentation/Engines/gig/Makefile \
1354 schoenebeck 697 linuxsampler.pc \
1355     Doxyfile \
1356 persson 2365 ])
1357     AC_OUTPUT
1358 schoenebeck 554
1359 schoenebeck 1212 # resolve all nested variables in '${config_plugin_dir}'
1360     # (merely for providing a human readable summary below)
1361     while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1362     config_plugin_dir=`eval echo ${config_plugin_dir}`
1363     done
1364 schoenebeck 554
1365 schoenebeck 1212
1366 schoenebeck 554 ###########################################################################
1367     # Output All Configuration Options
1368    
1369     echo ""
1370     echo "#####################################################################"
1371     echo "# LinuxSampler Configuration #"
1372     echo "#-------------------------------------------------------------------#"
1373 persson 2365 echo "# Release Version: ${VERSION}"
1374 schoenebeck 1876 echo "# LSCP Version: ${LSCP_RELEASE_MAJOR}.${LSCP_RELEASE_MINOR}"
1375     echo "#-------------------------------------------------------------------"
1376 schoenebeck 617 echo "# Assembly Optimizations: ${config_asm}"
1377 schoenebeck 554 echo "# Development Mode: ${config_dev_mode}"
1378     echo "# Debug Level: ${config_debug_level}"
1379     echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1380     echo "# Preload Samples: ${config_preload_samples}"
1381     echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1382     echo "# Maximum Events: ${config_max_events}"
1383     echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1384     echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1385     echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1386     echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1387     echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1388     echo "# Stream Size: ${config_stream_size}"
1389 schoenebeck 1800 echo "# Default Maximum Disk Streams: ${config_max_streams}"
1390     echo "# Default Maximum Voices: ${config_max_voices}"
1391 schoenebeck 738 echo "# Default Subfragment Size: ${config_subfragment_size}"
1392 schoenebeck 1005 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1393 schoenebeck 563 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1394 schoenebeck 714 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1395     echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1396 schoenebeck 554 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1397 schoenebeck 829 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1398     echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1399     echo "# Default Portamento Time: ${config_portamento_time_default} s"
1400 schoenebeck 554 echo "# Force Filter Usage: ${config_force_filter}"
1401     echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1402     echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1403     echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1404     echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1405     echo "# Override Filter Type: ${config_override_filter_type}"
1406 schoenebeck 563 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1407 iliev 716 echo "# Process Muted Channels: ${config_process_muted_channels}"
1408 schoenebeck 849 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1409 schoenebeck 1762 echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
1410 persson 830 echo "# Interpolate Volume: ${config_interpolate_volume}"
1411 schoenebeck 1364 echo "# Instruments database support: ${config_instruments_db}"
1412     if test "$config_instruments_db" = "yes"; then
1413     echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1414     fi
1415 schoenebeck 1212 echo "# Plugin Path: ${config_plugin_dir}"
1416 schoenebeck 1876 echo "#-------------------------------------------------------------------"
1417     echo "# MIDI Input Drivers:"
1418     echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack_midi}, CoreMIDI: ${config_have_coremidi}, MME: ${config_have_mme}, MidiShare: ${config_have_midishare}"
1419     echo "#-------------------------------------------------------------------"
1420     echo "# Audio Output Drivers:"
1421     echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack}, ARTS: ${config_have_arts}, CoreAudio: ${config_have_coreaudio}, ASIO: ${config_have_asio}"
1422     echo "#-------------------------------------------------------------------"
1423 iliev 2012 echo "# Sampler Engines:"
1424     echo "# GIG: yes, SF2: ${config_have_sf2}, SFZ: yes"
1425     echo "#-------------------------------------------------------------------"
1426 schoenebeck 2124 echo "# Effect plugin systems for internal effects:"
1427     echo "# LADSPA: yes"
1428     echo "#-------------------------------------------------------------------"
1429 schoenebeck 1876 echo "# Building sampler as plugin for following host standards:"
1430     echo "# DSSI: ${config_have_dssi}, LV2: ${config_have_lv2}, VST: ${config_have_vst}, AU: ${config_have_au}"
1431 schoenebeck 554 echo "#-------------------------------------------------------------------#"
1432     echo "# Read './configure --help' or file 'configure.in' for details. #"
1433     echo "#####################################################################"
1434     echo ""
1435     echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1436     echo ""

  ViewVC Help
Powered by ViewVC