/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Annotation of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 2665 - (hide annotations) (download)
Sun Jul 6 00:49:36 2014 UTC (4 years, 9 months ago) by schoenebeck
File size: 58776 byte(s)
* Another fix regarding virtual MIDI device event import.
* Bumped version (1.0.0.svn57).

1 schoenebeck 697 #------------------------------------------------------------------------------------
2     # LinuxSampler's / liblinuxsampler's "official" release version:
3    
4 persson 2365 m4_define(linuxsampler_release_major, 1)
5     m4_define(linuxsampler_release_minor, 0)
6 schoenebeck 2665 m4_define(linuxsampler_release_build, 0.svn57)
7 schoenebeck 697
8 persson 2365
9     AC_INIT([linuxsampler],[linuxsampler_release_major.linuxsampler_release_minor.linuxsampler_release_build])
10 persson 2368 AC_CONFIG_SRCDIR([configure.ac])
11 persson 2365
12 schoenebeck 697 #------------------------------------------------------------------------------------
13     # The following is the libtool / shared library version. This doesn't have to
14     # do anything with the release version. It MUST conform to the following rules:
15     #
16     # 1. Start with version information of `0:0:0' for each libtool library.
17     # 2. Update the version information only immediately before a public release of
18     # your software. More frequent updates are unnecessary, and only guarantee
19     # that the current interface number gets larger faster.
20     # 3. If the library source code has changed at all since the last update, then
21     # increment revision (`c:r:a' becomes `c:r+1:a').
22     # 4. If any interfaces have been added, removed, or changed since the last update,
23     # increment current, and set revision to 0.
24     # 5. If any interfaces have been added since the last public release, then increment
25     # age.
26     # 6. If any interfaces have been removed since the last public release, then set age
27     # to 0.
28    
29 schoenebeck 1956 LIBLINUXSAMPLER_LT_CURRENT=3
30 schoenebeck 697 LIBLINUXSAMPLER_LT_REVISION=0
31 schoenebeck 1956 LIBLINUXSAMPLER_LT_AGE=0
32 schoenebeck 697 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
33    
34 schoenebeck 947 #------------------------------------------------------------------------------------
35     # the LSCP specification version this LinuSampler release complies with:
36    
37     LSCP_RELEASE_MAJOR=1
38 schoenebeck 2500 LSCP_RELEASE_MINOR=6
39 schoenebeck 947
40     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
41     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
42    
43 persson 2578 AM_INIT_AUTOMAKE([subdir-objects])
44 schoenebeck 2535 AC_PROG_CC
45 schoenebeck 1741 AC_PROG_CXX
46 persson 1777 AC_LIBTOOL_WIN32_DLL
47 persson 2365 AC_PROG_LIBTOOL
48 schoenebeck 2581 AC_PROG_LEX
49 schoenebeck 2518 AC_PROG_YACC
50 schoenebeck 697
51     AC_SUBST(SHLIB_VERSION_ARG)
52     AC_SUBST(SHARED_VERSION_INFO)
53    
54 persson 2360 module=yes eval LIB_EXT=$shrext_cmds
55     AC_SUBST(LIB_EXT)
56    
57 schoenebeck 12 AC_C_BIGENDIAN
58 persson 1895 AC_CANONICAL_HOST
59 schoenebeck 9
60 schoenebeck 1639 PKG_PROG_PKG_CONFIG
61 schoenebeck 275
62 schoenebeck 554 ###########################################################################
63     # General Checks
64 schoenebeck 275
65 persson 1931 AM_CONDITIONAL(CROSS_COMPILING, test $cross_compiling = yes)
66    
67 schoenebeck 510 AC_MSG_CHECKING([whether x86 architecture])
68 schoenebeck 9 def_arch_x86=0
69 persson 1895 case $host_cpu in
70 persson 1794 "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
71 schoenebeck 9 echo "yes"
72     def_arch_x86=1;;
73     *)
74     echo "no";;
75     esac
76     AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
77    
78 schoenebeck 510 # determine the right gcc switch for CPU specific optimizations
79 schoenebeck 829 # (only if the user did not provide one)
80 schoenebeck 510 CXX_CPU_SWITCH=
81 schoenebeck 829 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
82 persson 1895 if test "$def_arch_x86" = 1 -a "$host_cpu" != "x86_64"; then
83     CXX_CPU_SWITCH="-march=$host_cpu"
84 schoenebeck 909 elif test "$target_cpu" = "ppc"; then
85 persson 1895 CXX_CPU_SWITCH="-arch=$host_cpu"
86 schoenebeck 829 fi
87 schoenebeck 510 fi
88     AC_SUBST([CXX_CPU_SWITCH])
89    
90 persson 2197 mac=no
91     linux=no
92     case "$host" in
93     *-*-darwin*)
94     mac=yes
95     ;;
96     *-*-linux*)
97     linux=yes
98     ;;
99     esac
100     AM_CONDITIONAL(LINUX, test "$linux" = yes)
101     AM_CONDITIONAL(MAC, test "$mac" = yes)
102    
103 senoner 1502 # check if we're on MS Windows
104     AC_CHECK_HEADERS(
105     mmsystem.h,
106     have_windows=1,
107 persson 1895 have_windows=0,
108     [#include <windef.h>]
109 senoner 1502 )
110     AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
111    
112 schoenebeck 288 AC_MSG_CHECKING([whether UNIX98 compatible])
113 persson 2365 AC_LANG_PUSH([C])
114     AC_RUN_IFELSE([AC_LANG_SOURCE([[
115 schoenebeck 288 #ifndef _GNU_SOURCE
116     #define _GNU_SOURCE 1
117     #endif
118     #include <features.h>
119     void main(void) {
120     #if _XOPEN_SOURCE >= 500
121     exit(0); /* UNIX98 compatible */
122     #else
123     exit(-1); /* not UNIX98 compatible */
124     #endif
125     }
126 persson 2365 ]])],
127 schoenebeck 288 have_unix98="yes",
128     have_unix98="no",
129     have_unix98="no"
130     )
131 persson 2365 AC_LANG_POP([C])
132 schoenebeck 288 AC_MSG_RESULT([$have_unix98])
133 persson 2369 if test "$have_unix98" = "no" -a "$have_windows" = "0" -a "$mac" = "no" ; then
134 schoenebeck 288 if test "x$HAVE_UNIX98" = "x"; then
135     echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
136 persson 2365 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run"
137     echo "./configure with environment variable HAVE_UNIX98=1 in case you think you"
138 schoenebeck 288 echo "have a UNIX98 compatible system."
139     exit -1;
140     fi
141     fi
142    
143 wylder 822 # check for <features.h>
144     AC_CHECK_HEADERS(features.h)
145 wylder 821
146 schoenebeck 1454 # test for POSIX thread library
147     m4_ifdef([m4_include(m4/pthread.m4)],,
148     [sinclude([m4/pthread.m4])])
149     ACX_PTHREAD
150     LIBS="$PTHREAD_LIBS $LIBS"
151     CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
152     CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
153     CC="$PTHREAD_CC"
154 schoenebeck 852
155 schoenebeck 1454 # check for a bug in NPTL-enabled glibc
156     # (see Gentoo bug report #194076)
157     AC_ARG_ENABLE(nptl-bug-check,
158     [ --disable-nptl-bug-check
159     Disable check for a bug in certain NPTL-enabled
160     glibc versions that caused crashs.],
161     [config_check_nptl_bug="$enableval"],
162     [config_check_nptl_bug="yes"]
163     )
164     if test "$config_check_nptl_bug" = "yes"; then
165     m4_ifdef([m4_include(m4/nptl_bug.m4)],,
166     [sinclude([m4/nptl_bug.m4])])
167     ACX_NPTL_GLIBC_BUG([
168     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
169     echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
170     echo "probably crash due to this. Please report us the system you are"
171     echo "using and/or file a bug report to the bug tracking system of"
172     echo "your distribution."
173     echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
174     echo "well, you can try to circumvent this problem for now by setting"
175     echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
176     echo "should cause this test to pass."
177     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
178     AC_MSG_ERROR([possibly NPTL glibc bug detected])
179     ])
180     else
181     echo "NPTL glibc bug check disabled"
182     fi
183    
184 schoenebeck 1742 # FIXME: this is actually a dependency of libgig, not of LS directly, why
185     # isn't it hidden by libgig?
186     AC_CHECK_HEADERS(uuid/uuid.h)
187     AC_SEARCH_LIBS(uuid_generate, uuid)
188 schoenebeck 1454
189 schoenebeck 2518 # In case Bison is available, determine the exact version, since we need to
190     # use different custom parser code for Bison 2.x vs. Bison 3.x generated
191     # parser yacc tables.
192     if echo "$YACC" | grep -q bison; then
193     # NOTE: m4 removes [], that's why it needs to be escaped
194     bison_version=[`$YACC --version | head -n 1 | sed -e 's/[^0-9.]*\([-0-9.]\+\)$/\1/'`]
195     bison_version_major=`echo $bison_version | cut -d. -f1`
196     bison_version_minor=`echo $bison_version | cut -d. -f2`
197     AC_DEFINE_UNQUOTED(HAVE_BISON_MAJ,$bison_version_major,[Define to the major version of the GNU Bison program installed.])
198     AC_DEFINE_UNQUOTED(HAVE_BISON_MIN,$bison_version_minor,[Define to the minor version of the GNU Bison program installed.])
199     fi
200 schoenebeck 1454
201 schoenebeck 1742
202 schoenebeck 2518
203 schoenebeck 852 ###########################################################################
204 schoenebeck 288 # Checks for available audio and MIDI systems / drivers
205     # (we throw an error if there's not at least one system for audio output and MIDI input available)
206 schoenebeck 852
207 schoenebeck 288 have_midi_input_driver="false"
208     have_audio_output_driver="false"
209    
210 schoenebeck 852 # ALSA
211     AC_ARG_ENABLE(alsa-driver,
212     [ --disable-alsa-driver
213     Disable support for the Advanced Linux Sound
214     Architecture (ALSA).],
215 schoenebeck 1360 [config_alsa_driver="$enableval"],
216 schoenebeck 852 [config_alsa_driver="yes"]
217 schoenebeck 18 )
218 schoenebeck 852 have_alsa=0
219     if test "$config_alsa_driver" = "yes"; then
220     AC_CHECK_HEADER(alsa/asoundlib.h,
221     AC_CHECK_LIB(asound, main,
222     have_alsa=1
223     ,
224     have_alsa=0
225     )
226     ,
227     have_alsa=0
228     )
229     if test "$have_alsa" = "1"; then
230     have_midi_input_driver="true"
231     have_audio_output_driver="true";
232     fi
233    
234     echo -n "checking Alsa version... "
235 persson 2365 AC_LANG_PUSH([C])
236     AC_RUN_IFELSE([AC_LANG_SOURCE([[
237 schoenebeck 852 #include <alsa/asoundlib.h>
238     void main(void) {
239     /* ensure backward compatibility */
240     #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
241     #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
242     #endif
243     exit(SND_LIB_MAJOR);
244     }
245 persson 2365 ]])],
246 schoenebeck 852 alsa_major=0,
247     alsa_major=$?,
248     alsa_major=0
249     )
250 persson 2365 AC_RUN_IFELSE([AC_LANG_SOURCE([[
251 schoenebeck 852 #include <alsa/asoundlib.h>
252     void main(void) {
253     /* ensure backward compatibility */
254     #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
255     #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
256     #endif
257     exit(SND_LIB_MINOR);
258     }
259 persson 2365 ]])],
260 schoenebeck 852 alsa_minor=0,
261     alsa_minor=$?,
262     alsa_minor=0
263     )
264 persson 2365 AC_RUN_IFELSE([AC_LANG_SOURCE([[
265 schoenebeck 852 #include <alsa/asoundlib.h>
266     void main(void) {
267     /* ensure backward compatibility */
268     #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
269     #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
270     #endif
271     exit(SND_LIB_SUBMINOR);
272     }
273 persson 2365 ]])],
274 schoenebeck 852 alsa_subminor=0,
275     alsa_subminor=$?,
276     alsa_subminor=0
277     )
278 persson 2365 AC_LANG_POP([C])
279 schoenebeck 852 echo "$alsa_major.$alsa_minor.$alsa_subminor";
280     AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
281     AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
282     AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
283     else
284     echo "ALSA support disabled by configure script parameter"
285 schoenebeck 18 fi
286 schoenebeck 291 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
287 schoenebeck 288 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
288 schoenebeck 1876 config_have_alsa="no"
289     if test $have_alsa = "1"; then
290     config_have_alsa="yes"
291     fi
292 schoenebeck 18
293 schoenebeck 852 # JACK
294     AC_ARG_ENABLE(jack-driver,
295     [ --disable-jack-driver
296     Disable support for the Jack Audio Connection Kit
297     (JACK).],
298 schoenebeck 1360 [config_jack_driver="$enableval"],
299 schoenebeck 852 [config_jack_driver="yes"]
300 schoenebeck 18 )
301 schoenebeck 852 have_jack=0
302     if test "$config_jack_driver" = "yes"; then
303     PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
304     if test $have_jack = "1"; then
305     AC_SUBST(JACK_LIBS)
306     AC_SUBST(JACK_CFLAGS)
307 persson 1748 linuxsampler_save_LIBS=$LIBS
308     LIBS="$JACK_LIBS $LIBS"
309 persson 2478 AC_CHECK_FUNCS(jack_client_name_size jack_client_open \
310     jack_on_info_shutdown)
311 persson 1748 LIBS=$linuxsampler_save_LIBS
312 schoenebeck 852 have_audio_output_driver="true";
313     fi
314 schoenebeck 33 else
315 schoenebeck 852 echo "JACK support disabled by configure script parameter"
316 schoenebeck 33 fi
317 schoenebeck 852 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
318     AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
319 schoenebeck 1876 config_have_jack="no"
320     if test $have_jack = "1"; then
321     config_have_jack="yes"
322     fi
323 schoenebeck 31
324 persson 1651 # JACK MIDI
325     have_jack_midi=0
326     if test $have_jack = "1"; then
327 persson 1652 linuxsampler_save_CFLAGS=$CFLAGS
328     linuxsampler_save_LIBS=$LIBS
329     CFLAGS="$JACK_CFLAGS $CFLAGS"
330     LIBS="$JACK_LIBS $LIBS"
331     AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
332     if test $have_jack_midi = "1"; then
333     AC_CHECK_FUNCS(jack_midi_get_event_count)
334     AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
335     jack_midi_clear_buffer(0, 0);
336     ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
337     [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
338     have_midi_input_driver="true"
339     fi
340     CFLAGS=$linuxsampler_save_CFLAGS
341     LIBS=$linuxsampler_save_LIBS
342 persson 1651 fi
343     AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
344     AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
345     [Define to 1 if you have JACK with MIDI support installed.])
346 schoenebeck 1876 config_have_jack_midi="no"
347     if test $have_jack_midi = "1"; then
348     config_have_jack_midi="yes"
349     fi
350 persson 1651
351 schoenebeck 838 # ARTS
352 schoenebeck 852 AC_ARG_ENABLE(arts-driver,
353     [ --disable-arts-driver
354     Disable support for the Analogue Realtime System
355     (aRts).],
356 schoenebeck 1360 [config_arts_driver="$enableval"],
357 schoenebeck 852 [config_arts_driver="yes"]
358     )
359     have_arts=0
360     if test "$config_arts_driver" = "yes"; then
361     m4_ifdef([m4_include(m4/arts.m4)],,
362     [sinclude([m4/arts.m4])])
363     AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
364     if test "$have_arts" = "1"; then
365     have_audio_output_driver="true"
366     fi
367     else
368     echo "ARTS support disabled by configure script parameter"
369 schoenebeck 838 fi
370     AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
371     AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
372 schoenebeck 1876 config_have_arts="no"
373     if test $have_arts = "1"; then
374     config_have_arts="yes"
375     fi
376 schoenebeck 838
377 senoner 1502 # ASIO AUDIO (Win32)
378     AC_ARG_ENABLE(asiosdk-dir,
379     [ --enable-asiosdk-dir
380     Directory where the ASIO SDK is located, this automatically
381     enables the compilation of the ASIO audio output driver.],
382     [config_asiosdk_dir="${enableval}"],
383     [config_asiosdk_dir="."]
384     )
385     AC_SUBST(config_asiosdk_dir)
386    
387     AC_ARG_ENABLE(asio-driver,
388     [ --disable-asio-driver
389     Disable support for the Windows ASIO driver.],
390     [config_asio_driver="$enableval"],
391     [config_asio_driver="yes"]
392     )
393     have_asio=0
394     ASIOSDK_BASEDIR=
395     if test "$config_asio_driver" = "yes"; then
396     asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
397     echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
398     if test -e $asiosdk_headerfile ; then
399     echo yes
400     have_asio=1
401     ASIOSDK_BASEDIR="$config_asiosdk_dir"
402     else
403     echo no
404     have_asio=0
405     fi
406     if test "$have_asio" = "1"; then
407     have_audio_output_driver="true"
408     fi
409     else
410     echo "Windows ASIO support disabled by configure script parameter"
411     fi
412     AC_SUBST(ASIOSDK_BASEDIR)
413     AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
414     AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
415 schoenebeck 1876 config_have_asio="no"
416     if test $have_asio = "1"; then
417     config_have_asio="yes"
418     fi
419 senoner 1502
420 schoenebeck 609 # MidiShare (Linux, OS X, Windows)
421 schoenebeck 852 AC_ARG_ENABLE(midishare-driver,
422     [ --disable-midishare-driver
423     Disable support for the MidiShare system.],
424 schoenebeck 1360 [config_midishare_driver="$enableval"],
425 schoenebeck 852 [config_midishare_driver="yes"]
426 schoenebeck 609 )
427 schoenebeck 852 have_midishare=0
428     if test "$config_midishare_driver" = "yes"; then
429     AC_CHECK_HEADER(MidiShare.h,
430     AC_CHECK_LIB(MidiShare, MidiCountEvs,
431     have_midishare=1,
432     have_midishare=0
433     )
434     ,
435     have_midishare=0
436     )
437     if test "$have_midishare" = "1"; then
438     have_midi_input_driver="true"
439     fi
440     else
441     echo "MidiShare support disabled by configure script parameter"
442 schoenebeck 609 fi
443     AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
444     AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
445 schoenebeck 1876 config_have_midishare="no"
446     if test $have_midishare = "1"; then
447     config_have_midishare="yes"
448     fi
449 schoenebeck 609
450     # CoreMIDI (OS X)
451 schoenebeck 852 AC_ARG_ENABLE(coremidi-driver,
452     [ --disable-coremidi-driver
453     Disable support for the Apple CoreMIDI system.],
454 schoenebeck 1360 [config_coremidi_driver="$enableval"],
455 schoenebeck 852 [config_coremidi_driver="yes"]
456 schoenebeck 609 )
457 schoenebeck 852 have_coremidi=0
458     if test "$config_coremidi_driver" = "yes"; then
459     AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
460     have_coremidi=1,
461     have_coremidi=0
462     )
463     if test "$have_coremidi" = "1"; then
464     have_midi_input_driver="true"
465     fi
466     else
467     echo "CoreMIDI support disabled by configure script parameter"
468 schoenebeck 609 fi
469     AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
470     AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
471 schoenebeck 1876 config_have_coremidi="no"
472     if test $have_coremidi = "1"; then
473     config_have_coremidi="yes"
474     fi
475 schoenebeck 609
476 iliev 1829 # CoreAudio (OS X)
477     AC_ARG_ENABLE(coreaudio-driver,
478     [ --disable-coreaudio-driver
479     Disable support for the Apple CoreAudio system.],
480     [config_coreaudio_driver="$enableval"],
481     [config_coreaudio_driver="yes"]
482     )
483     have_coreaudio=0
484     if test "$config_coreaudio_driver" = "yes"; then
485     AC_CHECK_HEADER(CoreAudio/CoreAudio.h,
486     have_coreaudio=1,
487     have_coreaudio=0
488     )
489     if test "$have_coreaudio" = "1"; then
490     have_audio_output_driver="true"
491     fi
492     else
493     echo "CoreAudio support disabled by configure script parameter"
494     fi
495     AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1")
496     AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.])
497 schoenebeck 1876 config_have_coreaudio="no"
498     if test $have_coreaudio = "1"; then
499     config_have_coreaudio="yes"
500     fi
501 iliev 1829
502 senoner 1502 # MME MIDI (Win32)
503     AC_ARG_ENABLE(mmemidi-driver,
504     [ --disable-mmemidi-driver
505     Disable support for the Windows MME MIDI system.],
506     [config_mmemidi_driver="$enableval"],
507     [config_mmemidi_driver="yes"]
508     )
509     have_mmemidi=0
510     if test "$config_mmemidi_driver" = "yes"; then
511     AC_CHECK_HEADERS(mmsystem.h,
512     have_mmemidi=1,
513     have_mmemidi=0
514     )
515     if test "$have_mmemidi" = "1"; then
516     have_midi_input_driver="true"
517     fi
518     else
519     echo "MME MIDI support disabled by configure script parameter"
520     fi
521     AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
522     AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
523 schoenebeck 1876 config_have_mme="no"
524     if test $have_mmemidi = "1"; then
525     config_have_mme="yes"
526     fi
527 senoner 1502
528 persson 1777 # DSSI
529     AC_CHECK_HEADERS(dssi.h,
530 schoenebeck 1876 config_have_dssi="yes",
531     config_have_dssi="no")
532     AM_CONDITIONAL(HAVE_DSSI, test $config_have_dssi = "yes")
533 persson 1777
534     # LV2
535 persson 2356 PKG_CHECK_MODULES(LV2, lv2 >= 1.0.0, config_have_lv2="yes", config_have_lv2="no")
536 persson 2343 AC_SUBST(LV2_CFLAGS)
537     AC_SUBST(LV2_LIBS)
538 schoenebeck 1876 AM_CONDITIONAL(HAVE_LV2, test $config_have_lv2 = "yes")
539 persson 1777
540     # VST
541     AC_ARG_ENABLE(vstsdk-dir,
542     [ --enable-vstsdk-dir
543     Directory where the VST SDK is located.
544     This automatically enables the compilation
545     of the VST plugin.],
546     [VSTSDK_DIR="${enableval}"],
547     [VSTSDK_DIR=]
548     )
549     AC_SUBST(VSTSDK_DIR)
550     AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
551 schoenebeck 1876 config_have_vst="no"
552     if test "x$VSTSDK_DIR" != "x"; then
553     config_have_vst="yes"
554     fi
555 persson 1777
556 iliev 1846 # AU
557     AC_CHECK_HEADERS(AudioUnit/AudioUnit.h,
558 schoenebeck 1876 config_have_au="yes",
559     config_have_au="no")
560     AM_CONDITIONAL(HAVE_AU, test $config_have_au = "yes")
561 iliev 1855 AM_CONDITIONAL(HAVE_AUFLAGS, test "$AUFLAGS" != "")
562 persson 1777
563 persson 2183 if test $config_have_au = "yes" ; then
564     if test "x$DEVELOPER_EXTRAS_DIR" = "x" ; then
565     if test -d /Developer/Extras ; then
566     DEVELOPER_EXTRAS_DIR=/Developer/Extras
567     else
568     DEVELOPER_EXTRAS_DIR=/Developer/Examples
569     fi
570     fi
571     AC_SUBST(DEVELOPER_EXTRAS_DIR)
572     fi
573 iliev 1846
574 persson 2203 if test "x$MAC_PLUGIN_INSTALL_DIR" = "x" ; then
575     MAC_PLUGIN_INSTALL_DIR=/Library/Audio/Plug-Ins
576     fi
577     AC_SUBST(MAC_PLUGIN_INSTALL_DIR)
578    
579 schoenebeck 1364 # have we found at least one MIDI input and one audio output driver ?
580     if test "$have_midi_input_driver" = "false"; then
581     echo "No supported MIDI input system found!"
582     echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
583 persson 1652 echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
584 schoenebeck 1364 echo "If you think you have one of those available on your system, make sure you"
585     echo "also have the respective development (header) files installed."
586     exit -1;
587     fi
588     if test "$have_audio_output_driver" = "false"; then
589     echo "No supported audio output system found!"
590 persson 1652 echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
591 schoenebeck 1364 echo "driver at the moment!"
592     exit -1;
593     fi
594    
595    
596    
597     ###########################################################################
598     # Checks for various DLL libraries
599    
600 schoenebeck 504 # Check presence of libgig
601 schoenebeck 1956 libgig_version="3.3.0"
602 schoenebeck 504 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
603     if test "$HAVE_GIG" = "false"; then
604     echo "Required libgig version not found!"
605     echo "You need to have libgig version ${libgig_version} installed!"
606     exit -1;
607 schoenebeck 714 else
608     echo "yes, found libgig $libgig_version"
609 schoenebeck 504 fi
610     AC_SUBST(GIG_CFLAGS)
611     AC_SUBST(GIG_LIBS)
612    
613 iliev 2018 # SF2 Engine (requires libgig)
614 iliev 2012 AC_ARG_ENABLE(sf2-engine,
615     [ --disable-sf2-engine
616     Disable compilation of the SF2 engine.
617 iliev 2018 You need to have libgig installed.],
618 iliev 2012 [config_sf2_engine="$enableval"],
619     [config_sf2_engine="yes"]
620     )
621     HAVE_SF2=0;
622     if test "$config_sf2_engine" = "yes"; then
623 iliev 2018 HAVE_SF2=1
624 iliev 2012 else
625     echo "SF2 engine disabled by configure script parameter"
626     fi
627     AM_CONDITIONAL(HAVE_SF2, test $HAVE_SF2 = 1)
628     AC_DEFINE_UNQUOTED(HAVE_SF2,$HAVE_SF2,[Define to 1 if you want SF2 engine and have libsf2 installed.])
629     config_have_sf2="no"
630     if test $HAVE_SF2 = "1"; then
631     config_have_sf2="yes"
632     fi
633    
634     # Check presence of libsndfile
635     libsndfile_version="1.0"
636     PKG_CHECK_MODULES(SNDFILE, sndfile >= $libsndfile_version, HAVE_SNDFILE=true, HAVE_SNDFILE=false)
637     if test "$HAVE_SNDFILE" = "false"; then
638     echo "Required libsndfile version not found!"
639     echo "You need to have libsndfile version ${libsndfile_version} installed!"
640     exit -1;
641     else
642     echo "yes, found libsndfile $libsndfile_version"
643     fi
644     AC_SUBST(SNDFILE_CFLAGS)
645     AC_SUBST(SNDFILE_LIBS)
646    
647 persson 2399 # Check for Vorbis and FLAC support in libsndfile
648 persson 2119 linuxsampler_save_CFLAGS=$CFLAGS
649     CFLAGS="$SNDFILE_CFLAGS $CFLAGS"
650 persson 2399 AC_CHECK_DECLS([SF_FORMAT_VORBIS, SF_FORMAT_FLAC], [], [], [[#include <sndfile.h>]])
651 persson 2167
652     # Check for loop functionality in libsndfile
653     AC_CHECK_MEMBERS([SF_INSTRUMENT.loops],,
654     [AC_MSG_WARN([Your version of libsndfile does not support
655     reading of loop information. LinuxSampler will not be able to
656     extract loop information from sample files.])],
657     [#include <sndfile.h>])
658 persson 2119 CFLAGS=$linuxsampler_save_CFLAGS
659    
660 schoenebeck 1364 # Instruments DB feature (requires SQLite 3.3)
661     AC_ARG_ENABLE(instruments-db,
662     [ --disable-instruments-db
663     Disable compilation of the sampler's instruments
664     database feature. You need to have SQLite 3.3
665     or younger installed for this feature.],
666     [config_instruments_db="$enableval"],
667     [config_instruments_db="yes"]
668     )
669     HAVE_SQLITE3=0;
670     if test "$config_instruments_db" = "yes"; then
671     # Check presence of sqlite3
672     sqlite_version="3.3"
673     PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
674     AC_SUBST(SQLITE3_LIBS)
675     AC_SUBST(SQLITE3_CFLAGS)
676     if test $HAVE_SQLITE3 = false; then
677     HAVE_SQLITE3=0
678     config_instruments_db="no"
679     echo "*** Required sqlite version not found!"
680     echo "*** You need to have sqlite version ${sqlite_version} or higher"
681     echo "*** for instruments database support to be enabled."
682     echo "*** Support for instruments DB will be disabled!"
683     else
684     HAVE_SQLITE3=1
685     fi
686 senkov 397 else
687 schoenebeck 1364 echo "Instruments DB feature disabled by configure script parameter"
688 senkov 397 fi
689     AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
690 schoenebeck 1364 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
691 schoenebeck 31
692 schoenebeck 288
693    
694 schoenebeck 554 ###########################################################################
695     # Handle Configuration Options
696    
697     # TODO: should we use AC_ARG_VAR(variable, description) instead?
698    
699 schoenebeck 617 AC_ARG_ENABLE(asm,
700 schoenebeck 1259 [ --disable-asm
701 schoenebeck 738 Enable hand-crafted assembly optimizations
702 schoenebeck 1259 (default=on). LinuxSampler provides CPU specific
703     assembly optimizations. This is currently limited
704     to just enter a fast (denormal) FPU mode on x86
705     platforms. There are currently no synthesis core
706     assembly optimizations anymore since LS 0.4.0],
707 schoenebeck 1360 [config_asm="$enableval"],
708 schoenebeck 1259 [config_asm="yes"]
709 schoenebeck 617 )
710     if test "$config_asm" = "yes"; then
711 schoenebeck 1259 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
712 schoenebeck 617 fi
713    
714 schoenebeck 554 AC_ARG_ENABLE(dev-mode,
715 schoenebeck 1424 [ --enable-dev-mode
716     Enable development mode (default=off). In that mode
717 schoenebeck 554 we do some extra sanity checks here and there.
718     This helps to spot possible problems, but reduces
719     efficiency a bit],
720 schoenebeck 1360 [config_dev_mode="$enableval"],
721 schoenebeck 1424 [config_dev_mode="no"]
722 schoenebeck 554 )
723     if test "$config_dev_mode" = "yes"; then
724     AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
725     fi
726    
727     AC_ARG_ENABLE(debug-level,
728     [ --enable-debug-level
729     Specify verbosity of console messages (default=1).
730     The higher the value, the higher will be verbosity.
731     A value of 0 means no console output at all.
732     There's not really an upper limit but the usual
733     level of all messages is currently somewhere less
734     than 10.],
735     [config_debug_level="${enableval}"],
736     [config_debug_level="1"]
737     )
738     AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
739    
740     AC_ARG_ENABLE(rt-exceptions,
741     [ --enable-rt-exceptions
742     Enable exceptions in the realtime thread
743     (default=no). If this is enabled, exceptions will
744     be thrown on critical errors in the realtime
745     context as well. Otherwise if disabled
746     segmentation faults will be forced by the
747     application on critical errors.],
748 schoenebeck 1360 [config_rt_exceptions="$enableval"],
749 schoenebeck 554 [config_rt_exceptions="no"]
750     )
751     if test "$config_rt_exceptions" = "yes"; then
752     AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
753     fi
754    
755 persson 2197 config_pthread_testcancel="$mac"
756 nagata 1649 AC_ARG_ENABLE(pthread-testcancel,
757     [ --enable-pthread-testcancel
758 persson 2185 Enable pthread_testcancel() calls and avoid
759     asynchronous cancel of pthreads (default=yes
760     for Mac targets, no otherwise).],
761 nagata 1649 [config_pthread_testcancel="$enableval"],
762 persson 2343 [])
763 nagata 1649 if test "$config_pthread_testcancel" = "yes"; then
764     AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
765     fi
766    
767 schoenebeck 554 AC_ARG_ENABLE(preload-samples,
768     [ --enable-preload-samples
769     Due to seeking and latency issues with hard drives
770     we have to cache a small part of samples' head in
771     RAM (default=32768). The higher this value the
772     more memory will be occupied for each sample, but
773     the safer this will be in regards of possible
774     droputs. A 'good' value depends on the running
775     system and usage dependant factors.],
776     [config_preload_samples="${enableval}"],
777     [config_preload_samples="32768"]
778     )
779     AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
780    
781     AC_ARG_ENABLE(max-pitch,
782     [ --enable-max-pitch
783     Specify the maximum allowed pitch value in octaves
784     (default=4). To lower memory usage you might want
785     set a smaller value.],
786     [config_max_pitch="${enableval}"],
787     [config_max_pitch="4"]
788     )
789     AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
790    
791     AC_ARG_ENABLE(max-events,
792     [ --enable-max-events
793     Specify the maximum allowed amount of events to be
794     processed per fragment (default=1024).],
795     [config_max_events="${enableval}"],
796     [config_max_events="1024"]
797     )
798     AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
799    
800     AC_ARG_ENABLE(eg-bottom,
801     [ --enable-eg-bottom
802     Bottom limit of envelope generators
803     (default=0.001). Certain kinds of curve types like
804     exponential curves converge against 0 but never
805     reach 0. So we have to define a certain low value
806     after which we should consider all smaller values
807     to be 'almost zero'. The smaller this value, the
808     longer will voices survive in EG's release stage
809     and thus waste voices. If this value is too high
810     will cause click sounds though.],
811     [config_eg_bottom="${enableval}"],
812     [config_eg_bottom="0.001"]
813     )
814     AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
815    
816     AC_ARG_ENABLE(eg-min-release-time,
817     [ --enable-eg-min-release-time
818     Specify the lowest allowed release time in seconds
819     (default=0.0025). This value will also be used to
820     ramp down voices on voice stealing. This value
821     should always be less than the period time of the
822     used audio driver, as in case of voice stealing
823     the killed voice needs to be completely ramped
824     down in the same fragment.],
825     [config_eg_min_release_time="${enableval}"],
826     [config_eg_min_release_time="0.0025"]
827     )
828     AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
829    
830     AC_ARG_ENABLE(refill-streams,
831     [ --enable-refill-streams
832     Number of streams that should be refilled in each
833     disk thread cycle (default=4).],
834     [config_refill_streams="${enableval}"],
835     [config_refill_streams="4"]
836     )
837     AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
838    
839     AC_ARG_ENABLE(stream-min-refill,
840     [ --enable-stream-min-refill
841     Minimum refill size for disk streams (default=1024).
842     The disk thread will go to sleep for a while if no
843     stream had to be refilled more than this value in
844     a disk thread cycle.],
845     [config_stream_min_refill="${enableval}"],
846     [config_stream_min_refill="1024"]
847     )
848     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
849    
850     AC_ARG_ENABLE(stream-max-refill,
851     [ --enable-stream-max-refill
852     Maximum refill size for disk streams
853     (default=65536). The disk thread will refill
854     each stream only by a size of this value per
855     disk thread cycle.],
856     [config_stream_max_refill="${enableval}"],
857     [config_stream_max_refill="65536"]
858     )
859     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
860    
861     AC_ARG_ENABLE(stream-size,
862     [ --enable-stream-size
863     Size of each stream's ring buffer in sample points
864     (default=262144).],
865     [config_stream_size="${enableval}"],
866     [config_stream_size="262144"]
867     )
868     AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
869    
870     AC_ARG_ENABLE(max-streams,
871     [ --enable-max-streams
872 schoenebeck 1800 Initial maximum amount of disk streams
873     (default=90). This value can be changed at
874     runtime. It should always be higher than the
875     maximum amount of voices.],
876 schoenebeck 554 [config_max_streams="${enableval}"],
877     [config_max_streams="90"]
878     )
879 schoenebeck 1800 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
880 schoenebeck 554
881     AC_ARG_ENABLE(max-voices,
882     [ --enable-max-voices
883 schoenebeck 1800 Initial maximum amount of voices (default=64).
884     This value can be changed at runtime. It should
885     always be lower than the maximum amount of disk
886     streams.],
887 schoenebeck 554 [config_max_voices="${enableval}"],
888     [config_max_voices="64"]
889     )
890 schoenebeck 1800 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
891 schoenebeck 554
892 schoenebeck 738 AC_ARG_ENABLE(subfragment-size,
893     [ --enable-subfragment-size
894     Every audio fragment will be splitted into
895     subfragments. Where each subfragment renders
896     audio with constant synthesis parameters. This is
897     done for efficiency reasons. This parameter
898     defines the default size of a subfragment in
899     sample points. A large value means less CPU time
900     whereas a low value means better audio quality
901     (default=32).],
902     [config_subfragment_size="${enableval}"],
903     [config_subfragment_size="32"]
904     )
905     AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
906    
907 schoenebeck 1005 AC_ARG_ENABLE(global-attenuation-default,
908     [ --enable-global-attenuation-default
909 schoenebeck 781 To prevent clipping all samples will be lowered
910 schoenebeck 1005 in amplitude by this given default factor (can
911     be overridden at runtime).
912 schoenebeck 781 (default=0.35)],
913 schoenebeck 1005 [config_global_attenuation_default="${enableval}"],
914     [config_global_attenuation_default="0.35"]
915 schoenebeck 781 )
916 schoenebeck 1005 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
917 schoenebeck 781
918 schoenebeck 554 AC_ARG_ENABLE(voice-steal-algo,
919     [ --enable-voice-steal-algo
920     Voice stealing algorithm to be used. Currently
921     available options:
922     none:
923     Disable voice stealing completely.
924 schoenebeck 563 oldestvoiceonkey (default):
925 schoenebeck 554 Try to kill a voice on the same key first,
926     if no success, proceed with the oldest key.
927 schoenebeck 563 oldestkey:
928 schoenebeck 554 Try to kill a voice from the oldest active
929     key.],
930     [ if test ! "(" "${enableval}" = "none" \
931     -o "${enableval}" = "oldestvoiceonkey" \
932     -o "${enableval}" = "oldestkey" ")" ; then
933     AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
934     else
935     config_voice_steal_algo="${enableval}"
936 schoenebeck 579 fi
937 schoenebeck 554 ],
938 schoenebeck 563 [config_voice_steal_algo="oldestvoiceonkey"]
939 schoenebeck 554 )
940     AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
941    
942     AC_ARG_ENABLE(sysex-buffer-size,
943     [ --enable-sysex-buffer-size
944     System Exclusive Message buffer size in kB
945     (default=2048).],
946     [config_sysex_buffer_size="${enableval}"],
947     [config_sysex_buffer_size="2048"]
948     )
949     AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
950    
951     AC_ARG_ENABLE(force-filter,
952     [ --enable-force-filter
953     If enabled will force filter to be used even if
954     no usage was define in instrument patch files.
955     (default=no).],
956 schoenebeck 1360 [config_force_filter="$enableval"],
957 schoenebeck 554 [config_force_filter="no"]
958     )
959     if test "$config_force_filter" = "yes"; then
960     AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
961     fi
962    
963     AC_ARG_ENABLE(filter-cutoff-min,
964     [ --enable-filter-cutoff-min
965     Minimum filter cutoff frequency in Hz
966     (default=100.0).],
967     [config_filter_cutoff_min="${enableval}"],
968     [config_filter_cutoff_min="100.0"]
969     )
970     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
971    
972     AC_ARG_ENABLE(filter-cutoff-max,
973     [ --enable-filter-cutoff-max
974     Maximum filter cutoff frequency in Hz
975     (default=10000.0).],
976     [config_filter_cutoff_max="${enableval}"],
977     [config_filter_cutoff_max="10000.0"]
978     )
979     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
980    
981     AC_ARG_ENABLE(override-cutoff-ctrl,
982     [ --enable-override-cutoff-ctrl
983     Override filter cutoff MIDI controller (default=no).
984     Note: you have to define the MIDI controller number
985     here, it's not a boolean parameter type! If this
986     option is used, controller number given by
987     instrument patch will be ignored and instead this
988     supplied value will be used.],
989     [config_override_cutoff_ctrl="${enableval}"],
990     [config_override_cutoff_ctrl="no"]
991     )
992     if test ! "$config_override_cutoff_ctrl" = "no"; then
993     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
994     fi
995    
996     AC_ARG_ENABLE(override-resonance-ctrl,
997     [ --enable-override-resonance-ctrl
998     Override filter resonance MIDI controller
999     (default=no). Note: you have to define the MIDI
1000     controller number here, it's not a boolean
1001     parameter type! If this option is used, controller
1002     number given by instrument patch will be ignored
1003     and instead this supplied value will be used.],
1004     [config_override_resonance_ctrl="${enableval}"],
1005     [config_override_resonance_ctrl="no"]
1006     )
1007     if test ! "$config_override_resonance_ctrl" = "no"; then
1008     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
1009     fi
1010    
1011     AC_ARG_ENABLE(override-filter-type,
1012     [ --enable-override-filter-type
1013     Override filter type (default=no). Options:
1014     hp: for highpass
1015     bp: for bandpass
1016     br: for bandreject
1017     lp: for lowpass
1018     lpt: for lowpass turbo],
1019     [ if test "${enableval}" = "hp" ; then
1020     config_override_filter_type="::gig::vcf_type_highpass"
1021     elif test "${enableval}" = "bp" ; then
1022     config_override_filter_type="::gig::vcf_type_bandpass"
1023     elif test "${enableval}" = "br" ; then
1024     config_override_filter_type="::gig::vcf_type_bandreject"
1025     elif test "${enableval}" = "lp" ; then
1026     config_override_filter_type="::gig::vcf_type_lowpass"
1027     elif test "${enableval}" = "lpt" ; then
1028     config_override_filter_type="::gig::vcf_type_lowpassturbo"
1029     elif test ! "${enableval}" = "no"; then
1030     AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
1031 schoenebeck 579 fi
1032 schoenebeck 554 ],
1033     [config_override_filter_type="no"]
1034     )
1035     if test ! "$config_override_filter_type" = "no"; then
1036     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
1037     fi
1038    
1039 schoenebeck 563 AC_ARG_ENABLE(gs-checksum,
1040     [ --enable-gs-checksum
1041     Enable Roland General Synth SysEx checksum check
1042     (default=no). If this is enabled, all GS SysEx
1043     messages which do not provide a correct checksum
1044     will be ignored. This is disabled by default as
1045     not all devices honor GS checksums.],
1046 schoenebeck 1360 [config_assert_gs_sysex_checksum="$enableval"],
1047 schoenebeck 563 [config_assert_gs_sysex_checksum="no"]
1048     )
1049     if test "config_assert_gs_sysex_checksum" = "yes"; then
1050     AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
1051     fi
1052    
1053 schoenebeck 829 AC_ARG_ENABLE(portamento-time-min,
1054     [ --enable-portamento-time-min
1055     Minimum Portamento time in seconds
1056     (default=0.1).],
1057     [config_portamento_time_min="${enableval}"],
1058     [config_portamento_time_min="0.1"]
1059     )
1060     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
1061    
1062     AC_ARG_ENABLE(portamento-time-max,
1063     [ --enable-portamento-time-max
1064     Maximum Portamento time in seconds
1065     (default=32).],
1066     [config_portamento_time_max="${enableval}"],
1067     [config_portamento_time_max="32"]
1068     )
1069     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
1070    
1071     AC_ARG_ENABLE(portamento-time-default,
1072     [ --enable-portamento-time-default
1073     Default Portamento time in seconds
1074     (default=1).],
1075     [config_portamento_time_default="${enableval}"],
1076     [config_portamento_time_default="1"]
1077     )
1078     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
1079    
1080 schoenebeck 714 AC_ARG_ENABLE(signed-triang-algo,
1081     [ --enable-signed-triang-algo
1082     Signed triangular wave algorithm to be used (e.g. for LFOs).
1083     Currently available options:
1084     intmath:
1085     Uses integer math without any branch will then be
1086     converted to floating point value for each sample point.
1087     This int->float conversion might hurt on some systems.
1088 senkov 720 intmathabs:
1089     Similar to intmath but uses abs() function.
1090     Depending on compiler and platrofm this could
1091     perform better than integer math as it avoids
1092 schoenebeck 1360 an extra integer multiply instruction.
1093 schoenebeck 714 diharmonic:
1094     The triangular wave will be approximated by adding two
1095     sinusoidials. This solution might especially hurt on
1096     systems with weak floating point unit.
1097     benchmark (default):
1098     This is not an algorithm. Use this option if the
1099     appropriate algorithm should be automatically
1100     chosen by the configure script by performing a
1101     benchmark between the algorithms mentioned above.
1102     This will NOT work for cross compilation!],
1103     [ if test ! "(" "${enableval}" = "intmath" \
1104 senkov 720 -o "${enableval}" = "intmathabs" \
1105 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
1106     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
1107     else
1108     config_signed_triang_algo="${enableval}"
1109     fi
1110     ],
1111     [config_signed_triang_algo="benchmark"]
1112     )
1113 schoenebeck 563
1114 schoenebeck 714 AC_ARG_ENABLE(unsigned-triang-algo,
1115     [ --enable-unsigned-triang-algo
1116     Unsigned triangular wave algorithm to be used (e.g. for LFOs).
1117     Currently available options:
1118     intmath:
1119     Uses integer math without any branch will then be
1120     converted to floating point value for each sample point.
1121     This int->float conversion might hurt on some systems.
1122 senkov 720 intmathabs:
1123     Similar to intmath but uses abs() function.
1124     Depending on compiler and platrofm this could
1125     perform better than integer math as it avoids
1126 schoenebeck 1360 an extra integer multiply instruction.
1127 schoenebeck 714 diharmonic:
1128     The triangular wave will be approximated by adding two
1129     sinusoidials. This solution might especially hurt on
1130     systems with weak floating point unit.
1131     benchmark (default):
1132     This is not an algorithm. Use this option if the
1133     appropriate algorithm should be automatically
1134     chosen by the configure script by performing a
1135     benchmark between the algorithms mentioned above.
1136     This will NOT work for cross compilation!],
1137     [ if test ! "(" "${enableval}" = "intmath" \
1138 senkov 720 -o "${enableval}" = "intmathabs" \
1139 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
1140     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
1141     else
1142     config_unsigned_triang_algo="${enableval}"
1143     fi
1144     ],
1145     [config_unsigned_triang_algo="benchmark"]
1146     )
1147    
1148 iliev 716 AC_ARG_ENABLE(process-muted-channels,
1149     [ --enable-process-muted-channels
1150     Enable processing of muted channels (default=no).
1151     In that mode all MIDI events in the muted channels
1152     will be processed. This will provide information
1153     about the active voices in the muted channels and
1154     will not discard notes, triggered in mute mode,
1155     when the channel is unmuted. But also will reduce
1156     the efficiency.],
1157 schoenebeck 1360 [config_process_muted_channels="$enableval"],
1158 iliev 716 [config_process_muted_channels="no"]
1159     )
1160     if test "$config_process_muted_channels" = "yes"; then
1161     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
1162     fi
1163 schoenebeck 714
1164 schoenebeck 849 AC_ARG_ENABLE(process-all-notes-off,
1165     [ --disable-process-all-notes-off
1166     Disable interpretation of All-Notes-Off MIDI
1167     messages (default=on). By default LS will release
1168     all voices whenever it receives an All-Notes-Off
1169     MIDI message. You can disable this behavior, so
1170     that LS simply ignores such messages.],
1171 schoenebeck 1360 [config_process_all_notes_off="$enableval"],
1172 schoenebeck 849 [config_process_all_notes_off="yes"]
1173     )
1174     if test "$config_process_all_notes_off" = "yes"; then
1175     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
1176     fi
1177    
1178 persson 830 AC_ARG_ENABLE(interpolate-volume,
1179     [ --disable-interpolate-volume
1180     Disable interpolation of volume modulation
1181     (default=on). With this enabled, the volume changes
1182     generated by for example the envelope generator
1183     will be smoother, minimizing the risk for audio
1184     clicks. Disable it to reduce CPU usage.],
1185 schoenebeck 1360 [config_interpolate_volume="$enableval"],
1186 persson 830 [config_interpolate_volume="yes"]
1187     )
1188     if test "$config_interpolate_volume" = "yes"; then
1189     AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
1190     fi
1191 iliev 716
1192 schoenebeck 1762 AC_ARG_ENABLE(master-volume-sysex-by-port,
1193     [ --enable-master-volume-sysex-by-port
1194     Whether global volume sysex message should be
1195     applied globally to the whole sampler or only to
1196     the sampler channels connected to the same MIDI
1197     input port on which the sysex message arrived on.
1198     By default global volume sysex messages apply
1199     globally to the whole sampler, since many MIDI
1200     devices behave that way.],
1201     [config_master_volume_sysex_by_port="$enableval"],
1202     [config_master_volume_sysex_by_port="no"]
1203     )
1204     if test "$config_master_volume_sysex_by_port" = "yes"; then
1205     AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
1206     fi
1207    
1208 schoenebeck 1212 AC_ARG_ENABLE(plugin-dir,
1209     [ --enable-plugin-dir
1210     Directory where the sampler shall look for potential plugins,
1211     that is 3rd party shared libraries that should be loaded by
1212     the sampler on startup. By default the sampler will search
1213     for plugins in the subdirectory "plugins" below its own
1214     library directory.
1215     (i.e. /usr/local/lib/linuxsampler/plugins)],
1216     [config_plugin_dir="${enableval}"],
1217     [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1218     )
1219     AC_SUBST(config_plugin_dir)
1220 persson 830
1221 schoenebeck 1364 AC_ARG_ENABLE(default-instruments-db-location,
1222     [ --enable-default-instruments-db-location
1223     Only when instruments DB feature is enabled: file name
1224     which shall be taken as default location of the
1225     instruments DB file. This location can still be
1226     overridden at runtime with a command line switch.
1227     (default: /var/lib/linuxsampler/instruments.db)],
1228     [config_default_instruments_db_file="${enableval}"],
1229     [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1230     )
1231     AC_DEFINE_UNQUOTED(
1232     CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1233     "$config_default_instruments_db_file",
1234     [Only when instruments DB feature is enabled: default location of the DB file.]
1235     )
1236 schoenebeck 1432 AC_SUBST(config_default_instruments_db_file)
1237 schoenebeck 1212
1238 schoenebeck 1364
1239 schoenebeck 554 ###########################################################################
1240 schoenebeck 714 # Automatic Benchmarks (to detect the best algorithms for the system)
1241    
1242     if test "$config_signed_triang_algo" = "benchmark"; then
1243     echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1244 persson 2365 AC_LANG_PUSH([C++])
1245     AC_RUN_IFELSE([AC_LANG_SOURCE([[
1246 schoenebeck 714 #define SIGNED 1
1247     #define SILENT 1
1248 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1249 persson 2365 ]])],
1250 schoenebeck 714 triang_signed=0,
1251     triang_signed=$?,
1252     triang_signed=0
1253     )
1254 persson 2365 AC_LANG_POP([C++])
1255 schoenebeck 714 if test "$triang_signed" = "2"; then
1256     config_signed_triang_algo="intmath"
1257     echo "integer math"
1258     elif test "$triang_signed" = "3"; then
1259     config_signed_triang_algo="diharmonic"
1260     echo "di harmonics"
1261 senkov 720 elif test "$triang_signed" = "5"; then
1262     config_signed_triang_algo="intmathabs"
1263     echo "integer math using abs()"
1264 schoenebeck 714 else
1265     echo "Benchmark of signed triangular wave algorithms failed!"
1266     echo "Maybe you are doing cross compilation? In that case you have to select"
1267     echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1268     echo "Call './configure --help' for further information or read configure.in."
1269     exit -1;
1270     fi
1271 schoenebeck 1165 else
1272     case "$config_signed_triang_algo" in
1273     intmath)
1274     triang_signed=2 ;;
1275     diharmonic)
1276     triang_signed=3 ;;
1277     intmathabs)
1278     triang_signed=5 ;;
1279     esac
1280 schoenebeck 714 fi
1281 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1282 schoenebeck 714
1283     if test "$config_unsigned_triang_algo" = "benchmark"; then
1284     echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1285 persson 2365 AC_LANG_PUSH([C++])
1286     AC_RUN_IFELSE([AC_LANG_SOURCE([[
1287 schoenebeck 714 #define SIGNED 0
1288     #define SILENT 1
1289 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1290 persson 2365 ]])],
1291 schoenebeck 714 triang_unsigned=0,
1292     triang_unsigned=$?,
1293     triang_unsigned=0
1294     )
1295 persson 2365 AC_LANG_POP([C++])
1296 schoenebeck 714 if test "$triang_unsigned" = "2"; then
1297     config_unsigned_triang_algo="intmath"
1298     echo "integer math"
1299     elif test "$triang_unsigned" = "3"; then
1300     config_unsigned_triang_algo="diharmonic"
1301     echo "di harmonics"
1302 senkov 720 elif test "$triang_unsigned" = "5"; then
1303 schoenebeck 726 config_unsigned_triang_algo="intmathabs"
1304 senkov 720 echo "integer math using abs()"
1305 schoenebeck 714 else
1306     echo "Benchmark of unsigned triangular wave algorithms failed!"
1307     echo "Maybe you are doing cross compilation? In that case you have to select"
1308     echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1309     echo "Call './configure --help' for further information or read configure.in."
1310     exit -1;
1311     fi
1312 schoenebeck 1165 else
1313     case "$config_unsigned_triang_algo" in
1314     intmath)
1315     triang_unsigned=2 ;;
1316     diharmonic)
1317     triang_unsigned=3 ;;
1318     intmathabs)
1319     triang_unsigned=5 ;;
1320     esac
1321 schoenebeck 714 fi
1322 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1323 schoenebeck 714
1324    
1325     ###########################################################################
1326 schoenebeck 554 # Create Build Files
1327    
1328 persson 2365 AC_CONFIG_HEADERS([config.h])
1329 schoenebeck 9
1330 persson 2365 AC_LANG([C++])
1331 persson 497
1332     # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1333     # this, the dlfcn.h check in am_prog_libtool may fail.
1334     AC_CHECK_HEADER(stdlib.h)
1335    
1336 persson 2365 AC_CONFIG_FILES([\
1337 schoenebeck 654 Makefile \
1338     man/Makefile \
1339     man/linuxsampler.1 \
1340 schoenebeck 2515 man/lscp.1 \
1341 schoenebeck 654 src/Makefile \
1342 iliev 1161 src/db/Makefile \
1343 schoenebeck 654 src/network/Makefile \
1344     src/engines/Makefile \
1345     src/engines/gig/Makefile \
1346 iliev 2012 src/engines/sf2/Makefile \
1347     src/engines/sfz/Makefile \
1348 schoenebeck 654 src/engines/common/Makefile \
1349 schoenebeck 1722 src/effects/Makefile \
1350 schoenebeck 1321 src/common/Makefile \
1351 schoenebeck 654 src/testcases/Makefile \
1352     src/drivers/Makefile \
1353     src/drivers/audio/Makefile \
1354     src/drivers/midi/Makefile \
1355 schoenebeck 1375 src/plugins/Makefile \
1356 persson 1777 src/hostplugins/Makefile \
1357     src/hostplugins/dssi/Makefile \
1358     src/hostplugins/lv2/Makefile \
1359 persson 2360 src/hostplugins/lv2/manifest.ttl \
1360 persson 1777 src/hostplugins/vst/Makefile \
1361 iliev 1846 src/hostplugins/au/Makefile \
1362 schoenebeck 2581 src/scriptvm/Makefile \
1363 schoenebeck 2515 src/shell/Makefile \
1364 schoenebeck 654 linuxsampler.spec \
1365     debian/Makefile \
1366     Artwork/Makefile \
1367     scripts/Makefile \
1368     osx/Makefile \
1369 schoenebeck 1175 osx/linuxsampler.xcodeproj/Makefile \
1370 schoenebeck 654 Documentation/Makefile \
1371     Documentation/Engines/Makefile \
1372     Documentation/Engines/gig/Makefile \
1373 schoenebeck 697 linuxsampler.pc \
1374     Doxyfile \
1375 persson 2365 ])
1376     AC_OUTPUT
1377 schoenebeck 554
1378 schoenebeck 1212 # resolve all nested variables in '${config_plugin_dir}'
1379     # (merely for providing a human readable summary below)
1380     while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1381     config_plugin_dir=`eval echo ${config_plugin_dir}`
1382     done
1383 schoenebeck 554
1384 schoenebeck 1212
1385 schoenebeck 554 ###########################################################################
1386     # Output All Configuration Options
1387    
1388     echo ""
1389     echo "#####################################################################"
1390     echo "# LinuxSampler Configuration #"
1391     echo "#-------------------------------------------------------------------#"
1392 persson 2365 echo "# Release Version: ${VERSION}"
1393 schoenebeck 1876 echo "# LSCP Version: ${LSCP_RELEASE_MAJOR}.${LSCP_RELEASE_MINOR}"
1394     echo "#-------------------------------------------------------------------"
1395 schoenebeck 617 echo "# Assembly Optimizations: ${config_asm}"
1396 schoenebeck 554 echo "# Development Mode: ${config_dev_mode}"
1397     echo "# Debug Level: ${config_debug_level}"
1398     echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1399     echo "# Preload Samples: ${config_preload_samples}"
1400     echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1401     echo "# Maximum Events: ${config_max_events}"
1402     echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1403     echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1404     echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1405     echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1406     echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1407     echo "# Stream Size: ${config_stream_size}"
1408 schoenebeck 1800 echo "# Default Maximum Disk Streams: ${config_max_streams}"
1409     echo "# Default Maximum Voices: ${config_max_voices}"
1410 schoenebeck 738 echo "# Default Subfragment Size: ${config_subfragment_size}"
1411 schoenebeck 1005 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1412 schoenebeck 563 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1413 schoenebeck 714 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1414     echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1415 schoenebeck 554 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1416 schoenebeck 829 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1417     echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1418     echo "# Default Portamento Time: ${config_portamento_time_default} s"
1419 schoenebeck 554 echo "# Force Filter Usage: ${config_force_filter}"
1420     echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1421     echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1422     echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1423     echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1424     echo "# Override Filter Type: ${config_override_filter_type}"
1425 schoenebeck 563 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1426 iliev 716 echo "# Process Muted Channels: ${config_process_muted_channels}"
1427 schoenebeck 849 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1428 schoenebeck 1762 echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
1429 persson 830 echo "# Interpolate Volume: ${config_interpolate_volume}"
1430 schoenebeck 1364 echo "# Instruments database support: ${config_instruments_db}"
1431     if test "$config_instruments_db" = "yes"; then
1432     echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1433     fi
1434 schoenebeck 1212 echo "# Plugin Path: ${config_plugin_dir}"
1435 schoenebeck 1876 echo "#-------------------------------------------------------------------"
1436     echo "# MIDI Input Drivers:"
1437     echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack_midi}, CoreMIDI: ${config_have_coremidi}, MME: ${config_have_mme}, MidiShare: ${config_have_midishare}"
1438     echo "#-------------------------------------------------------------------"
1439     echo "# Audio Output Drivers:"
1440     echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack}, ARTS: ${config_have_arts}, CoreAudio: ${config_have_coreaudio}, ASIO: ${config_have_asio}"
1441     echo "#-------------------------------------------------------------------"
1442 iliev 2012 echo "# Sampler Engines:"
1443     echo "# GIG: yes, SF2: ${config_have_sf2}, SFZ: yes"
1444     echo "#-------------------------------------------------------------------"
1445 schoenebeck 2124 echo "# Effect plugin systems for internal effects:"
1446     echo "# LADSPA: yes"
1447     echo "#-------------------------------------------------------------------"
1448 schoenebeck 1876 echo "# Building sampler as plugin for following host standards:"
1449     echo "# DSSI: ${config_have_dssi}, LV2: ${config_have_lv2}, VST: ${config_have_vst}, AU: ${config_have_au}"
1450 schoenebeck 554 echo "#-------------------------------------------------------------------#"
1451     echo "# Read './configure --help' or file 'configure.in' for details. #"
1452     echo "#####################################################################"
1453     echo ""
1454     echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1455     echo ""

  ViewVC Help
Powered by ViewVC