/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Annotation of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 716 - (hide annotations) (download)
Sun Jul 24 06:57:30 2005 UTC (18 years, 7 months ago) by iliev
Original Path: linuxsampler/trunk/configure.in
File size: 33293 byte(s)
* Added configure option --enable-process-muted-channels
which can be used to enable the processing of muted channels

1 schoenebeck 9 AC_INIT(configure.in)
2 schoenebeck 697
3     #------------------------------------------------------------------------------------
4     # LinuxSampler's / liblinuxsampler's "official" release version:
5    
6     LINUXSAMPLER_RELEASE_MAJOR=0
7     LINUXSAMPLER_RELEASE_MINOR=3
8     LINUXSAMPLER_RELEASE_BUILD=3
9    
10     #------------------------------------------------------------------------------------
11     # The following is the libtool / shared library version. This doesn't have to
12     # do anything with the release version. It MUST conform to the following rules:
13     #
14     # 1. Start with version information of `0:0:0' for each libtool library.
15     # 2. Update the version information only immediately before a public release of
16     # your software. More frequent updates are unnecessary, and only guarantee
17     # that the current interface number gets larger faster.
18     # 3. If the library source code has changed at all since the last update, then
19     # increment revision (`c:r:a' becomes `c:r+1:a').
20     # 4. If any interfaces have been added, removed, or changed since the last update,
21     # increment current, and set revision to 0.
22     # 5. If any interfaces have been added since the last public release, then increment
23     # age.
24     # 6. If any interfaces have been removed since the last public release, then set age
25     # to 0.
26    
27     LIBLINUXSAMPLER_LT_CURRENT=0
28     LIBLINUXSAMPLER_LT_REVISION=0
29     LIBLINUXSAMPLER_LT_AGE=0
30     SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31    
32     AM_PROG_LIBTOOL
33    
34     AC_SUBST(SHLIB_VERSION_ARG)
35     AC_SUBST(SHARED_VERSION_INFO)
36    
37 schoenebeck 12 AC_C_BIGENDIAN
38 schoenebeck 9 AC_CANONICAL_SYSTEM
39    
40 schoenebeck 80 AC_SUBST(target)
41     AC_SUBST(target_alias)
42     AC_SUBST(target_cpu)
43     AC_SUBST(target_os)
44     AC_SUBST(target_vendor)
45 schoenebeck 18
46 schoenebeck 275
47 schoenebeck 554 ###########################################################################
48     # General Checks
49 schoenebeck 275
50 schoenebeck 510 AC_MSG_CHECKING([whether x86 architecture])
51 schoenebeck 9 def_arch_x86=0
52     case $target_cpu in
53     "i386" | "i486" | "i586" | "i686" | "i786")
54     echo "yes"
55     def_arch_x86=1;;
56     *)
57     echo "no";;
58     esac
59     AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
60    
61 schoenebeck 510 # determine the right gcc switch for CPU specific optimizations
62     CXX_CPU_SWITCH=
63     if test "$def_arch_x86" = 1; then
64     CXX_CPU_SWITCH="-march=$target_cpu"
65     elif test "$target_cpu" = "powerpc"; then
66     CXX_CPU_SWITCH="-arch=$target_cpu"
67     fi
68     AC_SUBST([CXX_CPU_SWITCH])
69    
70 schoenebeck 288 AC_MSG_CHECKING([whether UNIX98 compatible])
71     AC_LANG_SAVE
72     AC_LANG_C
73     AC_TRY_RUN([
74     #ifndef _GNU_SOURCE
75     #define _GNU_SOURCE 1
76     #endif
77     #include <features.h>
78     void main(void) {
79     #if _XOPEN_SOURCE >= 500
80     exit(0); /* UNIX98 compatible */
81     #else
82     exit(-1); /* not UNIX98 compatible */
83     #endif
84     }
85     ],
86     have_unix98="yes",
87     have_unix98="no",
88     have_unix98="no"
89     )
90     AC_LANG_RESTORE
91     AC_MSG_RESULT([$have_unix98])
92     if test "$have_unix98" = "no"; then
93     if test "x$HAVE_UNIX98" = "x"; then
94     echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
95     echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
96     echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
97     echo "have a UNIX98 compatible system."
98     exit -1;
99     fi
100     fi
101    
102     # Checks for available audio and MIDI systems / drivers
103     # (we throw an error if there's not at least one system for audio output and MIDI input available)
104     have_midi_input_driver="false"
105     have_audio_output_driver="false"
106    
107 schoenebeck 18 AC_CHECK_HEADER(alsa/asoundlib.h,
108     AC_CHECK_LIB(asound, main,
109 schoenebeck 291 have_alsa=1
110 schoenebeck 18 ,
111 schoenebeck 291 have_alsa=0
112 schoenebeck 18 )
113     ,
114 schoenebeck 291 have_alsa=0
115 schoenebeck 18 )
116 schoenebeck 291 if test "$have_alsa" = "1"; then
117 schoenebeck 288 have_midi_input_driver="true"
118     have_audio_output_driver="true";
119 schoenebeck 18 fi
120 schoenebeck 291 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
121 schoenebeck 288 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
122 schoenebeck 18
123     echo -n "checking Alsa version... "
124     AC_LANG_SAVE
125     AC_LANG_C
126     AC_TRY_RUN([
127     #include <alsa/asoundlib.h>
128     void main(void) {
129     /* ensure backward compatibility */
130     #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
131     #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
132     #endif
133     exit(SND_LIB_MAJOR);
134     }
135     ],
136     alsa_major=0,
137     alsa_major=$?,
138     alsa_major=0
139     )
140     AC_TRY_RUN([
141     #include <alsa/asoundlib.h>
142     void main(void) {
143     /* ensure backward compatibility */
144     #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
145     #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
146     #endif
147     exit(SND_LIB_MINOR);
148     }
149     ],
150     alsa_minor=0,
151     alsa_minor=$?,
152     alsa_minor=0
153     )
154     AC_TRY_RUN([
155     #include <alsa/asoundlib.h>
156     void main(void) {
157     /* ensure backward compatibility */
158     #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
159     #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
160     #endif
161     exit(SND_LIB_SUBMINOR);
162     }
163     ],
164     alsa_subminor=0,
165     alsa_subminor=$?,
166     alsa_subminor=0
167     )
168     AC_LANG_RESTORE
169     echo "$alsa_major.$alsa_minor.$alsa_subminor";
170     AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
171     AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
172     AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
173    
174 schoenebeck 31 # JACK
175     PKG_CHECK_MODULES(JACK, jack, HAVE_JACK=true, HAVE_JACK=false)
176     AC_SUBST(JACK_LIBS)
177     AC_SUBST(JACK_CFLAGS)
178 schoenebeck 33 if test $HAVE_JACK = false; then
179     HAVE_JACK=0;
180     else
181 schoenebeck 288 HAVE_JACK=1
182     have_audio_output_driver="true";
183 persson 379 AC_CHECK_LIB(jack, jack_client_name_size, [AC_DEFINE(HAVE_JACK_CLIENT_NAME_SIZE, 1, [Define to 1 if you have the `jack_client_name_size' function.])], , $JACK_LIBS)
184 schoenebeck 33 fi
185 schoenebeck 288 AM_CONDITIONAL(HAVE_JACK, test $HAVE_JACK = 1)
186 schoenebeck 31 AC_DEFINE_UNQUOTED(HAVE_JACK,$HAVE_JACK,[Define to 1 if you have JACK installed.])
187    
188 schoenebeck 609 # MidiShare (Linux, OS X, Windows)
189     AC_CHECK_HEADER(MidiShare.h,
190     AC_CHECK_LIB(MidiShare, MidiCountEvs,
191     have_midishare=1,
192     have_midishare=0
193     )
194     ,
195     have_midishare=0
196     )
197     if test "$have_midishare" = "1"; then
198     have_midi_input_driver="true"
199     fi
200     AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
201     AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
202    
203     # CoreMIDI (OS X)
204     AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
205     have_coremidi=1,
206     have_coremidi=0
207     )
208     if test "$have_coremidi" = "1"; then
209     have_midi_input_driver="true"
210     fi
211     AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
212     AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
213    
214 schoenebeck 504 # Check presence of libgig
215 capela 643 libgig_version="2.0.1"
216 schoenebeck 504 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
217     if test "$HAVE_GIG" = "false"; then
218     echo "Required libgig version not found!"
219     echo "You need to have libgig version ${libgig_version} installed!"
220     exit -1;
221 schoenebeck 714 else
222     echo "yes, found libgig $libgig_version"
223 schoenebeck 504 fi
224     AC_SUBST(GIG_CFLAGS)
225     AC_SUBST(GIG_LIBS)
226    
227 senkov 397 # SQLITE3
228     PKG_CHECK_MODULES(SQLITE3, sqlite3, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
229     AC_SUBST(SQLITE3_LIBS)
230     AC_SUBST(SQLITE3_CFLAGS)
231     if test $HAVE_SQLITE3 = false; then
232     HAVE_SQLITE3=0;
233 schoenebeck 714 echo "no, support for instrument DB will be disabled!"
234 senkov 397 else
235     HAVE_SQLITE3=1
236 schoenebeck 714 echo "yes"
237 senkov 397 fi
238     AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
239     AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you have SQLITE3 installed.])
240 schoenebeck 31
241 schoenebeck 291 if test "$have_midi_input_driver" = "false"; then
242 schoenebeck 288 echo "No supported MIDI input system found!"
243 schoenebeck 609 echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
244     echo "ALSA, MIDIShare, CoreMIDI."
245     echo "If you think you have one of those available on your system, make sure you"
246     echo "also have the respective development (header) files installed."
247 schoenebeck 288 exit -1;
248     fi
249 schoenebeck 291 if test "$have_audio_output_driver" = "false"; then
250 schoenebeck 288 echo "No supported audio output system found!"
251     echo "Sorry, LinuxSampler only supports ALSA and JACK as audio output driver at the moment!"
252     exit -1;
253     fi
254    
255    
256 schoenebeck 554 ###########################################################################
257     # Handle Configuration Options
258    
259     # TODO: should we use AC_ARG_VAR(variable, description) instead?
260    
261 schoenebeck 617 AC_ARG_ENABLE(asm,
262     [ --disable-asm
263     Disable hand-crafted assembly optimizations
264     (default=on). LinuxSampler provides CPU specific
265     assembly optimizations for the most important
266     synthesis algorithms. You usually don't want to
267 persson 685 disable that.],
268 schoenebeck 617 [config_asm="no"],
269     [config_asm="yes"]
270     )
271     if test "$config_asm" = "yes"; then
272     AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable hand-crafted asm optimizations.])
273     fi
274    
275 schoenebeck 554 AC_ARG_ENABLE(dev-mode,
276     [ --enable-dev-mode
277     Enable development mode (default=no). In that mode
278     we do some extra sanity checks here and there.
279     This helps to spot possible problems, but reduces
280     efficiency a bit],
281     [config_dev_mode="yes"],
282     [config_dev_mode="no"]
283     )
284     if test "$config_dev_mode" = "yes"; then
285     AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
286     fi
287    
288     AC_ARG_ENABLE(debug-level,
289     [ --enable-debug-level
290     Specify verbosity of console messages (default=1).
291     The higher the value, the higher will be verbosity.
292     A value of 0 means no console output at all.
293     There's not really an upper limit but the usual
294     level of all messages is currently somewhere less
295     than 10.],
296     [config_debug_level="${enableval}"],
297     [config_debug_level="1"]
298     )
299     AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
300    
301     AC_ARG_ENABLE(rt-exceptions,
302     [ --enable-rt-exceptions
303     Enable exceptions in the realtime thread
304     (default=no). If this is enabled, exceptions will
305     be thrown on critical errors in the realtime
306     context as well. Otherwise if disabled
307     segmentation faults will be forced by the
308     application on critical errors.],
309     [config_rt_exceptions="yes"],
310     [config_rt_exceptions="no"]
311     )
312     if test "$config_rt_exceptions" = "yes"; then
313     AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
314     fi
315    
316     AC_ARG_ENABLE(preload-samples,
317     [ --enable-preload-samples
318     Due to seeking and latency issues with hard drives
319     we have to cache a small part of samples' head in
320     RAM (default=32768). The higher this value the
321     more memory will be occupied for each sample, but
322     the safer this will be in regards of possible
323     droputs. A 'good' value depends on the running
324     system and usage dependant factors.],
325     [config_preload_samples="${enableval}"],
326     [config_preload_samples="32768"]
327     )
328     AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
329    
330     AC_ARG_ENABLE(max-pitch,
331     [ --enable-max-pitch
332     Specify the maximum allowed pitch value in octaves
333     (default=4). To lower memory usage you might want
334     set a smaller value.],
335     [config_max_pitch="${enableval}"],
336     [config_max_pitch="4"]
337     )
338     AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
339    
340     AC_ARG_ENABLE(max-events,
341     [ --enable-max-events
342     Specify the maximum allowed amount of events to be
343     processed per fragment (default=1024).],
344     [config_max_events="${enableval}"],
345     [config_max_events="1024"]
346     )
347     AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
348    
349     AC_ARG_ENABLE(eg-bottom,
350     [ --enable-eg-bottom
351     Bottom limit of envelope generators
352     (default=0.001). Certain kinds of curve types like
353     exponential curves converge against 0 but never
354     reach 0. So we have to define a certain low value
355     after which we should consider all smaller values
356     to be 'almost zero'. The smaller this value, the
357     longer will voices survive in EG's release stage
358     and thus waste voices. If this value is too high
359     will cause click sounds though.],
360     [config_eg_bottom="${enableval}"],
361     [config_eg_bottom="0.001"]
362     )
363     AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
364    
365     AC_ARG_ENABLE(eg-min-release-time,
366     [ --enable-eg-min-release-time
367     Specify the lowest allowed release time in seconds
368     (default=0.0025). This value will also be used to
369     ramp down voices on voice stealing. This value
370     should always be less than the period time of the
371     used audio driver, as in case of voice stealing
372     the killed voice needs to be completely ramped
373     down in the same fragment.],
374     [config_eg_min_release_time="${enableval}"],
375     [config_eg_min_release_time="0.0025"]
376     )
377     AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
378    
379     AC_ARG_ENABLE(refill-streams,
380     [ --enable-refill-streams
381     Number of streams that should be refilled in each
382     disk thread cycle (default=4).],
383     [config_refill_streams="${enableval}"],
384     [config_refill_streams="4"]
385     )
386     AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
387    
388     AC_ARG_ENABLE(stream-min-refill,
389     [ --enable-stream-min-refill
390     Minimum refill size for disk streams (default=1024).
391     The disk thread will go to sleep for a while if no
392     stream had to be refilled more than this value in
393     a disk thread cycle.],
394     [config_stream_min_refill="${enableval}"],
395     [config_stream_min_refill="1024"]
396     )
397     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
398    
399     AC_ARG_ENABLE(stream-max-refill,
400     [ --enable-stream-max-refill
401     Maximum refill size for disk streams
402     (default=65536). The disk thread will refill
403     each stream only by a size of this value per
404     disk thread cycle.],
405     [config_stream_max_refill="${enableval}"],
406     [config_stream_max_refill="65536"]
407     )
408     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
409    
410     AC_ARG_ENABLE(stream-size,
411     [ --enable-stream-size
412     Size of each stream's ring buffer in sample points
413     (default=262144).],
414     [config_stream_size="${enableval}"],
415     [config_stream_size="262144"]
416     )
417     AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
418    
419     AC_ARG_ENABLE(max-streams,
420     [ --enable-max-streams
421     Maximum amount of disk streams (default=90). This
422     value should always be higher than the maximum
423     amount of voices.],
424     [config_max_streams="${enableval}"],
425     [config_max_streams="90"]
426     )
427     AC_DEFINE_UNQUOTED(CONFIG_MAX_STREAMS, $config_max_streams, [Define max. streams.])
428    
429     AC_ARG_ENABLE(max-voices,
430     [ --enable-max-voices
431     Maximum amount of voices (default=64). This value
432     should always be lower than the maximum amount of
433     disk streams.],
434     [config_max_voices="${enableval}"],
435     [config_max_voices="64"]
436     )
437     AC_DEFINE_UNQUOTED(CONFIG_MAX_VOICES, $config_max_voices, [Define max. voices.])
438    
439     AC_ARG_ENABLE(voice-steal-algo,
440     [ --enable-voice-steal-algo
441     Voice stealing algorithm to be used. Currently
442     available options:
443     none:
444     Disable voice stealing completely.
445 schoenebeck 563 oldestvoiceonkey (default):
446 schoenebeck 554 Try to kill a voice on the same key first,
447     if no success, proceed with the oldest key.
448 schoenebeck 563 oldestkey:
449 schoenebeck 554 Try to kill a voice from the oldest active
450     key.],
451     [ if test ! "(" "${enableval}" = "none" \
452     -o "${enableval}" = "oldestvoiceonkey" \
453     -o "${enableval}" = "oldestkey" ")" ; then
454     AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
455     else
456     config_voice_steal_algo="${enableval}"
457 schoenebeck 579 fi
458 schoenebeck 554 ],
459 schoenebeck 563 [config_voice_steal_algo="oldestvoiceonkey"]
460 schoenebeck 554 )
461     AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
462    
463     AC_ARG_ENABLE(sysex-buffer-size,
464     [ --enable-sysex-buffer-size
465     System Exclusive Message buffer size in kB
466     (default=2048).],
467     [config_sysex_buffer_size="${enableval}"],
468     [config_sysex_buffer_size="2048"]
469     )
470     AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
471    
472     AC_ARG_ENABLE(filter-update-steps,
473     [ --enable-filter-update-steps
474     Amount of sample points after which filter
475     parameters (cutoff, resonance) are going to be
476     updated (default=64). Higher value means less CPU
477     load, but also worse parameter resolution, this
478     value will be aligned to a power of two.],
479     [config_filter_update_steps="${enableval}"],
480     [config_filter_update_steps="64"]
481     )
482     AC_DEFINE_UNQUOTED(CONFIG_FILTER_UPDATE_STEPS, $config_filter_update_steps, [Define amount of steps to refresh filter coefficients.])
483    
484     AC_ARG_ENABLE(force-filter,
485     [ --enable-force-filter
486     If enabled will force filter to be used even if
487     no usage was define in instrument patch files.
488     (default=no).],
489     [config_force_filter="yes"],
490     [config_force_filter="no"]
491     )
492     if test "$config_force_filter" = "yes"; then
493     AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
494     fi
495    
496     AC_ARG_ENABLE(filter-cutoff-min,
497     [ --enable-filter-cutoff-min
498     Minimum filter cutoff frequency in Hz
499     (default=100.0).],
500     [config_filter_cutoff_min="${enableval}"],
501     [config_filter_cutoff_min="100.0"]
502     )
503     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
504    
505     AC_ARG_ENABLE(filter-cutoff-max,
506     [ --enable-filter-cutoff-max
507     Maximum filter cutoff frequency in Hz
508     (default=10000.0).],
509     [config_filter_cutoff_max="${enableval}"],
510     [config_filter_cutoff_max="10000.0"]
511     )
512     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
513    
514     AC_ARG_ENABLE(override-cutoff-ctrl,
515     [ --enable-override-cutoff-ctrl
516     Override filter cutoff MIDI controller (default=no).
517     Note: you have to define the MIDI controller number
518     here, it's not a boolean parameter type! If this
519     option is used, controller number given by
520     instrument patch will be ignored and instead this
521     supplied value will be used.],
522     [config_override_cutoff_ctrl="${enableval}"],
523     [config_override_cutoff_ctrl="no"]
524     )
525     if test ! "$config_override_cutoff_ctrl" = "no"; then
526     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
527     fi
528    
529     AC_ARG_ENABLE(override-resonance-ctrl,
530     [ --enable-override-resonance-ctrl
531     Override filter resonance MIDI controller
532     (default=no). Note: you have to define the MIDI
533     controller number here, it's not a boolean
534     parameter type! If this option is used, controller
535     number given by instrument patch will be ignored
536     and instead this supplied value will be used.],
537     [config_override_resonance_ctrl="${enableval}"],
538     [config_override_resonance_ctrl="no"]
539     )
540     if test ! "$config_override_resonance_ctrl" = "no"; then
541     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
542     fi
543    
544     AC_ARG_ENABLE(override-filter-type,
545     [ --enable-override-filter-type
546     Override filter type (default=no). Options:
547     hp: for highpass
548     bp: for bandpass
549     br: for bandreject
550     lp: for lowpass
551     lpt: for lowpass turbo],
552     [ if test "${enableval}" = "hp" ; then
553     config_override_filter_type="::gig::vcf_type_highpass"
554     elif test "${enableval}" = "bp" ; then
555     config_override_filter_type="::gig::vcf_type_bandpass"
556     elif test "${enableval}" = "br" ; then
557     config_override_filter_type="::gig::vcf_type_bandreject"
558     elif test "${enableval}" = "lp" ; then
559     config_override_filter_type="::gig::vcf_type_lowpass"
560     elif test "${enableval}" = "lpt" ; then
561     config_override_filter_type="::gig::vcf_type_lowpassturbo"
562     elif test ! "${enableval}" = "no"; then
563     AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
564 schoenebeck 579 fi
565 schoenebeck 554 ],
566     [config_override_filter_type="no"]
567     )
568     if test ! "$config_override_filter_type" = "no"; then
569     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
570     fi
571    
572 schoenebeck 563 AC_ARG_ENABLE(gs-checksum,
573     [ --enable-gs-checksum
574     Enable Roland General Synth SysEx checksum check
575     (default=no). If this is enabled, all GS SysEx
576     messages which do not provide a correct checksum
577     will be ignored. This is disabled by default as
578     not all devices honor GS checksums.],
579     [config_assert_gs_sysex_checksum="yes"],
580     [config_assert_gs_sysex_checksum="no"]
581     )
582     if test "config_assert_gs_sysex_checksum" = "yes"; then
583     AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
584     fi
585    
586 schoenebeck 714 AC_ARG_ENABLE(signed-triang-algo,
587     [ --enable-signed-triang-algo
588     Signed triangular wave algorithm to be used (e.g. for LFOs).
589     Currently available options:
590     intmath:
591     Uses integer math without any branch will then be
592     converted to floating point value for each sample point.
593     This int->float conversion might hurt on some systems.
594     diharmonic:
595     The triangular wave will be approximated by adding two
596     sinusoidials. This solution might especially hurt on
597     systems with weak floating point unit.
598     benchmark (default):
599     This is not an algorithm. Use this option if the
600     appropriate algorithm should be automatically
601     chosen by the configure script by performing a
602     benchmark between the algorithms mentioned above.
603     This will NOT work for cross compilation!],
604     [ if test ! "(" "${enableval}" = "intmath" \
605     -o "${enableval}" = "diharmonic" ")" ; then
606     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
607     else
608     config_signed_triang_algo="${enableval}"
609     fi
610     ],
611     [config_signed_triang_algo="benchmark"]
612     )
613 schoenebeck 563
614 schoenebeck 714 AC_ARG_ENABLE(unsigned-triang-algo,
615     [ --enable-unsigned-triang-algo
616     Unsigned triangular wave algorithm to be used (e.g. for LFOs).
617     Currently available options:
618     intmath:
619     Uses integer math without any branch will then be
620     converted to floating point value for each sample point.
621     This int->float conversion might hurt on some systems.
622     diharmonic:
623     The triangular wave will be approximated by adding two
624     sinusoidials. This solution might especially hurt on
625     systems with weak floating point unit.
626     benchmark (default):
627     This is not an algorithm. Use this option if the
628     appropriate algorithm should be automatically
629     chosen by the configure script by performing a
630     benchmark between the algorithms mentioned above.
631     This will NOT work for cross compilation!],
632     [ if test ! "(" "${enableval}" = "intmath" \
633     -o "${enableval}" = "diharmonic" ")" ; then
634     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
635     else
636     config_unsigned_triang_algo="${enableval}"
637     fi
638     ],
639     [config_unsigned_triang_algo="benchmark"]
640     )
641    
642 iliev 716 AC_ARG_ENABLE(process-muted-channels,
643     [ --enable-process-muted-channels
644     Enable processing of muted channels (default=no).
645     In that mode all MIDI events in the muted channels
646     will be processed. This will provide information
647     about the active voices in the muted channels and
648     will not discard notes, triggered in mute mode,
649     when the channel is unmuted. But also will reduce
650     the efficiency.],
651     [config_process_muted_channels="yes"],
652     [config_process_muted_channels="no"]
653     )
654     if test "$config_process_muted_channels" = "yes"; then
655     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
656     fi
657 schoenebeck 714
658 iliev 716
659 schoenebeck 554 ###########################################################################
660 schoenebeck 714 # Automatic Benchmarks (to detect the best algorithms for the system)
661    
662     AC_LANG_SAVE
663    
664     if test "$config_signed_triang_algo" = "benchmark"; then
665     echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
666     AC_LANG_CPLUSPLUS
667     AC_TRY_RUN([
668     #define SIGNED 1
669     #define SILENT 1
670     #include "benchmarks/triang.cpp"
671     ],
672     triang_signed=0,
673     triang_signed=$?,
674     triang_signed=0
675     )
676     if test "$triang_signed" = "2"; then
677     config_signed_triang_algo="intmath"
678     echo "integer math"
679     elif test "$triang_signed" = "3"; then
680     config_signed_triang_algo="diharmonic"
681     echo "di harmonics"
682     else
683     echo "Benchmark of signed triangular wave algorithms failed!"
684     echo "Maybe you are doing cross compilation? In that case you have to select"
685     echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
686     echo "Call './configure --help' for further information or read configure.in."
687     exit -1;
688     fi
689     fi
690     AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, signed_triang_algo_${config_signed_triang_algo}, [Define signed triangular wave algorithm to be used.])
691    
692     if test "$config_unsigned_triang_algo" = "benchmark"; then
693     echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
694     AC_LANG_CPLUSPLUS
695     AC_TRY_RUN([
696     #define SIGNED 0
697     #define SILENT 1
698     #include "benchmarks/triang.cpp"
699     ],
700     triang_unsigned=0,
701     triang_unsigned=$?,
702     triang_unsigned=0
703     )
704     if test "$triang_unsigned" = "2"; then
705     config_unsigned_triang_algo="intmath"
706     echo "integer math"
707     elif test "$triang_unsigned" = "3"; then
708     config_unsigned_triang_algo="diharmonic"
709     echo "di harmonics"
710     else
711     echo "Benchmark of unsigned triangular wave algorithms failed!"
712     echo "Maybe you are doing cross compilation? In that case you have to select"
713     echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
714     echo "Call './configure --help' for further information or read configure.in."
715     exit -1;
716     fi
717     fi
718     AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, unsigned_triang_algo_${config_unsigned_triang_algo}, [Define unsigned triangular wave algorithm to be used.])
719    
720     AC_LANG_RESTORE
721    
722    
723     ###########################################################################
724 schoenebeck 554 # Create Build Files
725    
726 schoenebeck 9 AM_CONFIG_HEADER(config.h)
727 schoenebeck 697 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
728 schoenebeck 9
729     AC_LANG_CPLUSPLUS
730     AC_PROG_CXX
731 persson 497
732 persson 685 # some gcc 4.0 versions need -msse for SSE register allocations
733     if test "$config_asm" = "yes"; then
734     if test "$def_arch_x86" = 1; then
735     CXXFLAGS="$CXXFLAGS -msse"
736     fi
737     fi
738    
739 persson 497 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
740     # this, the dlfcn.h check in am_prog_libtool may fail.
741     AC_CHECK_HEADER(stdlib.h)
742    
743 schoenebeck 654 AC_OUTPUT( \
744     Makefile \
745     man/Makefile \
746     man/linuxsampler.1 \
747     src/Makefile \
748     src/network/Makefile \
749     src/engines/Makefile \
750     src/engines/gig/Makefile \
751     src/engines/common/Makefile \
752     src/common/Makefile src/lib/Makefile \
753     src/lib/fileloader/Makefile \
754     src/lib/fileloader/libgig/Makefile \
755     src/testcases/Makefile \
756     src/drivers/Makefile \
757     src/drivers/audio/Makefile \
758     src/drivers/midi/Makefile \
759     linuxsampler.spec \
760     debian/Makefile \
761     Artwork/Makefile \
762     scripts/Makefile \
763     osx/Makefile \
764     osx/LinuxSampler.xcode/Makefile \
765     Documentation/Makefile \
766     Documentation/Engines/Makefile \
767     Documentation/Engines/gig/Makefile \
768 schoenebeck 697 linuxsampler.pc \
769     Doxyfile \
770 schoenebeck 654 )
771 schoenebeck 554
772    
773     ###########################################################################
774     # Output All Configuration Options
775    
776     echo ""
777     echo "#####################################################################"
778     echo "# LinuxSampler Configuration #"
779     echo "#-------------------------------------------------------------------#"
780 schoenebeck 617 echo "# Assembly Optimizations: ${config_asm}"
781 schoenebeck 554 echo "# Development Mode: ${config_dev_mode}"
782     echo "# Debug Level: ${config_debug_level}"
783     echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
784     echo "# Preload Samples: ${config_preload_samples}"
785     echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
786     echo "# Maximum Events: ${config_max_events}"
787     echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
788     echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
789     echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
790     echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
791     echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
792     echo "# Stream Size: ${config_stream_size}"
793     echo "# Maximum Disk Streams: ${config_max_streams}"
794     echo "# Maximum Voices: ${config_max_voices}"
795 schoenebeck 563 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
796 schoenebeck 714 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
797     echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
798 schoenebeck 554 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
799     echo "# Filter Update Steps: ${config_filter_update_steps}"
800     echo "# Force Filter Usage: ${config_force_filter}"
801     echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
802     echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
803     echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
804     echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
805     echo "# Override Filter Type: ${config_override_filter_type}"
806 schoenebeck 563 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
807 iliev 716 echo "# Process Muted Channels: ${config_process_muted_channels}"
808 schoenebeck 554 echo "#-------------------------------------------------------------------#"
809     echo "# Read './configure --help' or file 'configure.in' for details. #"
810     echo "#####################################################################"
811     echo ""
812     echo "Good. Now type 'make' to compile, followed by 'make install' as root."
813     echo ""

  ViewVC Help
Powered by ViewVC