/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Annotation of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 857 - (hide annotations) (download)
Wed May 3 20:40:19 2006 UTC (17 years, 10 months ago) by schoenebeck
Original Path: linuxsampler/trunk/configure.in
File size: 40671 byte(s)
updated dependency to latest libgig release (3.0.0)

1 schoenebeck 9 AC_INIT(configure.in)
2 schoenebeck 697
3     #------------------------------------------------------------------------------------
4     # LinuxSampler's / liblinuxsampler's "official" release version:
5    
6     LINUXSAMPLER_RELEASE_MAJOR=0
7     LINUXSAMPLER_RELEASE_MINOR=3
8 schoenebeck 826 LINUXSAMPLER_RELEASE_BUILD=3cvs
9 schoenebeck 697
10     #------------------------------------------------------------------------------------
11     # The following is the libtool / shared library version. This doesn't have to
12     # do anything with the release version. It MUST conform to the following rules:
13     #
14     # 1. Start with version information of `0:0:0' for each libtool library.
15     # 2. Update the version information only immediately before a public release of
16     # your software. More frequent updates are unnecessary, and only guarantee
17     # that the current interface number gets larger faster.
18     # 3. If the library source code has changed at all since the last update, then
19     # increment revision (`c:r:a' becomes `c:r+1:a').
20     # 4. If any interfaces have been added, removed, or changed since the last update,
21     # increment current, and set revision to 0.
22     # 5. If any interfaces have been added since the last public release, then increment
23     # age.
24     # 6. If any interfaces have been removed since the last public release, then set age
25     # to 0.
26    
27     LIBLINUXSAMPLER_LT_CURRENT=0
28     LIBLINUXSAMPLER_LT_REVISION=0
29     LIBLINUXSAMPLER_LT_AGE=0
30     SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31    
32     AM_PROG_LIBTOOL
33    
34     AC_SUBST(SHLIB_VERSION_ARG)
35     AC_SUBST(SHARED_VERSION_INFO)
36    
37 schoenebeck 12 AC_C_BIGENDIAN
38 schoenebeck 9 AC_CANONICAL_SYSTEM
39    
40 schoenebeck 80 AC_SUBST(target)
41     AC_SUBST(target_alias)
42     AC_SUBST(target_cpu)
43     AC_SUBST(target_os)
44     AC_SUBST(target_vendor)
45 schoenebeck 18
46 schoenebeck 275
47 schoenebeck 554 ###########################################################################
48     # General Checks
49 schoenebeck 275
50 schoenebeck 510 AC_MSG_CHECKING([whether x86 architecture])
51 schoenebeck 9 def_arch_x86=0
52     case $target_cpu in
53     "i386" | "i486" | "i586" | "i686" | "i786")
54     echo "yes"
55     def_arch_x86=1;;
56     *)
57     echo "no";;
58     esac
59     AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
60    
61 schoenebeck 510 # determine the right gcc switch for CPU specific optimizations
62 schoenebeck 829 # (only if the user did not provide one)
63 schoenebeck 510 CXX_CPU_SWITCH=
64 schoenebeck 829 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
65     if test "$def_arch_x86" = 1; then
66     CXX_CPU_SWITCH="-march=$target_cpu"
67     elif test "$target_cpu" = "powerpc"; then
68     CXX_CPU_SWITCH="-arch=$target_cpu"
69     fi
70 schoenebeck 510 fi
71     AC_SUBST([CXX_CPU_SWITCH])
72    
73 schoenebeck 288 AC_MSG_CHECKING([whether UNIX98 compatible])
74     AC_LANG_SAVE
75     AC_LANG_C
76     AC_TRY_RUN([
77     #ifndef _GNU_SOURCE
78     #define _GNU_SOURCE 1
79     #endif
80     #include <features.h>
81     void main(void) {
82     #if _XOPEN_SOURCE >= 500
83     exit(0); /* UNIX98 compatible */
84     #else
85     exit(-1); /* not UNIX98 compatible */
86     #endif
87     }
88     ],
89     have_unix98="yes",
90     have_unix98="no",
91     have_unix98="no"
92     )
93     AC_LANG_RESTORE
94     AC_MSG_RESULT([$have_unix98])
95     if test "$have_unix98" = "no"; then
96     if test "x$HAVE_UNIX98" = "x"; then
97     echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
98     echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
99     echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
100     echo "have a UNIX98 compatible system."
101     exit -1;
102     fi
103     fi
104    
105 wylder 822 # check for <features.h>
106     AC_CHECK_HEADERS(features.h)
107 wylder 821
108 schoenebeck 852
109     ###########################################################################
110 schoenebeck 288 # Checks for available audio and MIDI systems / drivers
111     # (we throw an error if there's not at least one system for audio output and MIDI input available)
112 schoenebeck 852
113 schoenebeck 288 have_midi_input_driver="false"
114     have_audio_output_driver="false"
115    
116 schoenebeck 852 # ALSA
117     AC_ARG_ENABLE(alsa-driver,
118     [ --disable-alsa-driver
119     Disable support for the Advanced Linux Sound
120     Architecture (ALSA).],
121     [config_alsa_driver="no"],
122     [config_alsa_driver="yes"]
123 schoenebeck 18 )
124 schoenebeck 852 have_alsa=0
125     if test "$config_alsa_driver" = "yes"; then
126     AC_CHECK_HEADER(alsa/asoundlib.h,
127     AC_CHECK_LIB(asound, main,
128     have_alsa=1
129     ,
130     have_alsa=0
131     )
132     ,
133     have_alsa=0
134     )
135     if test "$have_alsa" = "1"; then
136     have_midi_input_driver="true"
137     have_audio_output_driver="true";
138     fi
139    
140     echo -n "checking Alsa version... "
141     AC_LANG_SAVE
142     AC_LANG_C
143     AC_TRY_RUN([
144     #include <alsa/asoundlib.h>
145     void main(void) {
146     /* ensure backward compatibility */
147     #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
148     #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
149     #endif
150     exit(SND_LIB_MAJOR);
151     }
152     ],
153     alsa_major=0,
154     alsa_major=$?,
155     alsa_major=0
156     )
157     AC_TRY_RUN([
158     #include <alsa/asoundlib.h>
159     void main(void) {
160     /* ensure backward compatibility */
161     #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
162     #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
163     #endif
164     exit(SND_LIB_MINOR);
165     }
166     ],
167     alsa_minor=0,
168     alsa_minor=$?,
169     alsa_minor=0
170     )
171     AC_TRY_RUN([
172     #include <alsa/asoundlib.h>
173     void main(void) {
174     /* ensure backward compatibility */
175     #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
176     #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
177     #endif
178     exit(SND_LIB_SUBMINOR);
179     }
180     ],
181     alsa_subminor=0,
182     alsa_subminor=$?,
183     alsa_subminor=0
184     )
185     AC_LANG_RESTORE
186     echo "$alsa_major.$alsa_minor.$alsa_subminor";
187     AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
188     AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
189     AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
190     else
191     echo "ALSA support disabled by configure script parameter"
192 schoenebeck 18 fi
193 schoenebeck 291 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
194 schoenebeck 288 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
195 schoenebeck 18
196 schoenebeck 852 # JACK
197     AC_ARG_ENABLE(jack-driver,
198     [ --disable-jack-driver
199     Disable support for the Jack Audio Connection Kit
200     (JACK).],
201     [config_jack_driver="no"],
202     [config_jack_driver="yes"]
203 schoenebeck 18 )
204 schoenebeck 852 have_jack=0
205     if test "$config_jack_driver" = "yes"; then
206     PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
207     if test $have_jack = "1"; then
208     AC_SUBST(JACK_LIBS)
209     AC_SUBST(JACK_CFLAGS)
210     AC_CHECK_LIB(jack, jack_client_name_size, [AC_DEFINE(HAVE_JACK_CLIENT_NAME_SIZE, 1, [Define to 1 if you have the `jack_client_name_size' function.])], , $JACK_LIBS)
211     have_audio_output_driver="true";
212     fi
213 schoenebeck 33 else
214 schoenebeck 852 echo "JACK support disabled by configure script parameter"
215 schoenebeck 33 fi
216 schoenebeck 852 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
217     AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
218 schoenebeck 31
219 schoenebeck 838 # ARTS
220 schoenebeck 852 AC_ARG_ENABLE(arts-driver,
221     [ --disable-arts-driver
222     Disable support for the Analogue Realtime System
223     (aRts).],
224     [config_arts_driver="no"],
225     [config_arts_driver="yes"]
226     )
227     have_arts=0
228     if test "$config_arts_driver" = "yes"; then
229     m4_ifdef([m4_include(m4/arts.m4)],,
230     [sinclude([m4/arts.m4])])
231     AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
232     if test "$have_arts" = "1"; then
233     have_audio_output_driver="true"
234     fi
235     else
236     echo "ARTS support disabled by configure script parameter"
237 schoenebeck 838 fi
238     AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
239     AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
240    
241 schoenebeck 609 # MidiShare (Linux, OS X, Windows)
242 schoenebeck 852 AC_ARG_ENABLE(midishare-driver,
243     [ --disable-midishare-driver
244     Disable support for the MidiShare system.],
245     [config_midishare_driver="no"],
246     [config_midishare_driver="yes"]
247 schoenebeck 609 )
248 schoenebeck 852 have_midishare=0
249     if test "$config_midishare_driver" = "yes"; then
250     AC_CHECK_HEADER(MidiShare.h,
251     AC_CHECK_LIB(MidiShare, MidiCountEvs,
252     have_midishare=1,
253     have_midishare=0
254     )
255     ,
256     have_midishare=0
257     )
258     if test "$have_midishare" = "1"; then
259     have_midi_input_driver="true"
260     fi
261     else
262     echo "MidiShare support disabled by configure script parameter"
263 schoenebeck 609 fi
264     AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
265     AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
266    
267     # CoreMIDI (OS X)
268 schoenebeck 852 AC_ARG_ENABLE(coremidi-driver,
269     [ --disable-coremidi-driver
270     Disable support for the Apple CoreMIDI system.],
271     [config_coremidi_driver="no"],
272     [config_coremidi_driver="yes"]
273 schoenebeck 609 )
274 schoenebeck 852 have_coremidi=0
275     if test "$config_coremidi_driver" = "yes"; then
276     AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
277     have_coremidi=1,
278     have_coremidi=0
279     )
280     if test "$have_coremidi" = "1"; then
281     have_midi_input_driver="true"
282     fi
283     else
284     echo "CoreMIDI support disabled by configure script parameter"
285 schoenebeck 609 fi
286     AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
287     AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
288    
289 schoenebeck 504 # Check presence of libgig
290 schoenebeck 857 libgig_version="3.0.0"
291 schoenebeck 504 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
292     if test "$HAVE_GIG" = "false"; then
293     echo "Required libgig version not found!"
294     echo "You need to have libgig version ${libgig_version} installed!"
295     exit -1;
296 schoenebeck 714 else
297     echo "yes, found libgig $libgig_version"
298 schoenebeck 504 fi
299     AC_SUBST(GIG_CFLAGS)
300     AC_SUBST(GIG_LIBS)
301    
302 senkov 397 # SQLITE3
303     PKG_CHECK_MODULES(SQLITE3, sqlite3, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
304     AC_SUBST(SQLITE3_LIBS)
305     AC_SUBST(SQLITE3_CFLAGS)
306     if test $HAVE_SQLITE3 = false; then
307     HAVE_SQLITE3=0;
308 schoenebeck 714 echo "no, support for instrument DB will be disabled!"
309 senkov 397 else
310     HAVE_SQLITE3=1
311 schoenebeck 714 echo "yes"
312 senkov 397 fi
313     AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
314     AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you have SQLITE3 installed.])
315 schoenebeck 31
316 schoenebeck 291 if test "$have_midi_input_driver" = "false"; then
317 schoenebeck 288 echo "No supported MIDI input system found!"
318 schoenebeck 609 echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
319     echo "ALSA, MIDIShare, CoreMIDI."
320     echo "If you think you have one of those available on your system, make sure you"
321     echo "also have the respective development (header) files installed."
322 schoenebeck 288 exit -1;
323     fi
324 schoenebeck 291 if test "$have_audio_output_driver" = "false"; then
325 schoenebeck 288 echo "No supported audio output system found!"
326     echo "Sorry, LinuxSampler only supports ALSA and JACK as audio output driver at the moment!"
327     exit -1;
328     fi
329    
330    
331 schoenebeck 554 ###########################################################################
332     # Handle Configuration Options
333    
334     # TODO: should we use AC_ARG_VAR(variable, description) instead?
335    
336 schoenebeck 617 AC_ARG_ENABLE(asm,
337 schoenebeck 738 [ --enable-asm
338     Enable hand-crafted assembly optimizations
339     (default=off). LinuxSampler provides CPU specific
340 schoenebeck 617 assembly optimizations for the most important
341 schoenebeck 738 synthesis algorithms. This is currently disabled
342     by default since current asm code is broken.],
343     [config_asm="yes"],
344     [config_asm="no"]
345 schoenebeck 617 )
346     if test "$config_asm" = "yes"; then
347     AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable hand-crafted asm optimizations.])
348     fi
349    
350 schoenebeck 554 AC_ARG_ENABLE(dev-mode,
351 schoenebeck 738 [ --disable-dev-mode
352     Disable development mode (default=on). In that mode
353 schoenebeck 554 we do some extra sanity checks here and there.
354     This helps to spot possible problems, but reduces
355     efficiency a bit],
356 schoenebeck 738 [config_dev_mode="no"],
357     [config_dev_mode="yes"]
358 schoenebeck 554 )
359     if test "$config_dev_mode" = "yes"; then
360     AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
361     fi
362    
363     AC_ARG_ENABLE(debug-level,
364     [ --enable-debug-level
365     Specify verbosity of console messages (default=1).
366     The higher the value, the higher will be verbosity.
367     A value of 0 means no console output at all.
368     There's not really an upper limit but the usual
369     level of all messages is currently somewhere less
370     than 10.],
371     [config_debug_level="${enableval}"],
372     [config_debug_level="1"]
373     )
374     AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
375    
376     AC_ARG_ENABLE(rt-exceptions,
377     [ --enable-rt-exceptions
378     Enable exceptions in the realtime thread
379     (default=no). If this is enabled, exceptions will
380     be thrown on critical errors in the realtime
381     context as well. Otherwise if disabled
382     segmentation faults will be forced by the
383     application on critical errors.],
384     [config_rt_exceptions="yes"],
385     [config_rt_exceptions="no"]
386     )
387     if test "$config_rt_exceptions" = "yes"; then
388     AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
389     fi
390    
391     AC_ARG_ENABLE(preload-samples,
392     [ --enable-preload-samples
393     Due to seeking and latency issues with hard drives
394     we have to cache a small part of samples' head in
395     RAM (default=32768). The higher this value the
396     more memory will be occupied for each sample, but
397     the safer this will be in regards of possible
398     droputs. A 'good' value depends on the running
399     system and usage dependant factors.],
400     [config_preload_samples="${enableval}"],
401     [config_preload_samples="32768"]
402     )
403     AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
404    
405     AC_ARG_ENABLE(max-pitch,
406     [ --enable-max-pitch
407     Specify the maximum allowed pitch value in octaves
408     (default=4). To lower memory usage you might want
409     set a smaller value.],
410     [config_max_pitch="${enableval}"],
411     [config_max_pitch="4"]
412     )
413     AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
414    
415     AC_ARG_ENABLE(max-events,
416     [ --enable-max-events
417     Specify the maximum allowed amount of events to be
418     processed per fragment (default=1024).],
419     [config_max_events="${enableval}"],
420     [config_max_events="1024"]
421     )
422     AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
423    
424     AC_ARG_ENABLE(eg-bottom,
425     [ --enable-eg-bottom
426     Bottom limit of envelope generators
427     (default=0.001). Certain kinds of curve types like
428     exponential curves converge against 0 but never
429     reach 0. So we have to define a certain low value
430     after which we should consider all smaller values
431     to be 'almost zero'. The smaller this value, the
432     longer will voices survive in EG's release stage
433     and thus waste voices. If this value is too high
434     will cause click sounds though.],
435     [config_eg_bottom="${enableval}"],
436     [config_eg_bottom="0.001"]
437     )
438     AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
439    
440     AC_ARG_ENABLE(eg-min-release-time,
441     [ --enable-eg-min-release-time
442     Specify the lowest allowed release time in seconds
443     (default=0.0025). This value will also be used to
444     ramp down voices on voice stealing. This value
445     should always be less than the period time of the
446     used audio driver, as in case of voice stealing
447     the killed voice needs to be completely ramped
448     down in the same fragment.],
449     [config_eg_min_release_time="${enableval}"],
450     [config_eg_min_release_time="0.0025"]
451     )
452     AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
453    
454     AC_ARG_ENABLE(refill-streams,
455     [ --enable-refill-streams
456     Number of streams that should be refilled in each
457     disk thread cycle (default=4).],
458     [config_refill_streams="${enableval}"],
459     [config_refill_streams="4"]
460     )
461     AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
462    
463     AC_ARG_ENABLE(stream-min-refill,
464     [ --enable-stream-min-refill
465     Minimum refill size for disk streams (default=1024).
466     The disk thread will go to sleep for a while if no
467     stream had to be refilled more than this value in
468     a disk thread cycle.],
469     [config_stream_min_refill="${enableval}"],
470     [config_stream_min_refill="1024"]
471     )
472     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
473    
474     AC_ARG_ENABLE(stream-max-refill,
475     [ --enable-stream-max-refill
476     Maximum refill size for disk streams
477     (default=65536). The disk thread will refill
478     each stream only by a size of this value per
479     disk thread cycle.],
480     [config_stream_max_refill="${enableval}"],
481     [config_stream_max_refill="65536"]
482     )
483     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
484    
485     AC_ARG_ENABLE(stream-size,
486     [ --enable-stream-size
487     Size of each stream's ring buffer in sample points
488     (default=262144).],
489     [config_stream_size="${enableval}"],
490     [config_stream_size="262144"]
491     )
492     AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
493    
494     AC_ARG_ENABLE(max-streams,
495     [ --enable-max-streams
496     Maximum amount of disk streams (default=90). This
497     value should always be higher than the maximum
498     amount of voices.],
499     [config_max_streams="${enableval}"],
500     [config_max_streams="90"]
501     )
502     AC_DEFINE_UNQUOTED(CONFIG_MAX_STREAMS, $config_max_streams, [Define max. streams.])
503    
504     AC_ARG_ENABLE(max-voices,
505     [ --enable-max-voices
506     Maximum amount of voices (default=64). This value
507     should always be lower than the maximum amount of
508     disk streams.],
509     [config_max_voices="${enableval}"],
510     [config_max_voices="64"]
511     )
512     AC_DEFINE_UNQUOTED(CONFIG_MAX_VOICES, $config_max_voices, [Define max. voices.])
513    
514 schoenebeck 738 AC_ARG_ENABLE(subfragment-size,
515     [ --enable-subfragment-size
516     Every audio fragment will be splitted into
517     subfragments. Where each subfragment renders
518     audio with constant synthesis parameters. This is
519     done for efficiency reasons. This parameter
520     defines the default size of a subfragment in
521     sample points. A large value means less CPU time
522     whereas a low value means better audio quality
523     (default=32).],
524     [config_subfragment_size="${enableval}"],
525     [config_subfragment_size="32"]
526     )
527     AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
528    
529 schoenebeck 781 AC_ARG_ENABLE(global-attenuation,
530     [ --enable-global-attenuation
531     To prevent clipping all samples will be lowered
532     in amplitude by this given factor.
533     (default=0.35)],
534     [config_global_attenuation="${enableval}"],
535     [config_global_attenuation="0.35"]
536     )
537     AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION, $config_global_attenuation, [Define global volume attenuation (as floating point factor).])
538    
539 schoenebeck 554 AC_ARG_ENABLE(voice-steal-algo,
540     [ --enable-voice-steal-algo
541     Voice stealing algorithm to be used. Currently
542     available options:
543     none:
544     Disable voice stealing completely.
545 schoenebeck 563 oldestvoiceonkey (default):
546 schoenebeck 554 Try to kill a voice on the same key first,
547     if no success, proceed with the oldest key.
548 schoenebeck 563 oldestkey:
549 schoenebeck 554 Try to kill a voice from the oldest active
550     key.],
551     [ if test ! "(" "${enableval}" = "none" \
552     -o "${enableval}" = "oldestvoiceonkey" \
553     -o "${enableval}" = "oldestkey" ")" ; then
554     AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
555     else
556     config_voice_steal_algo="${enableval}"
557 schoenebeck 579 fi
558 schoenebeck 554 ],
559 schoenebeck 563 [config_voice_steal_algo="oldestvoiceonkey"]
560 schoenebeck 554 )
561     AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
562    
563     AC_ARG_ENABLE(sysex-buffer-size,
564     [ --enable-sysex-buffer-size
565     System Exclusive Message buffer size in kB
566     (default=2048).],
567     [config_sysex_buffer_size="${enableval}"],
568     [config_sysex_buffer_size="2048"]
569     )
570     AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
571    
572     AC_ARG_ENABLE(force-filter,
573     [ --enable-force-filter
574     If enabled will force filter to be used even if
575     no usage was define in instrument patch files.
576     (default=no).],
577     [config_force_filter="yes"],
578     [config_force_filter="no"]
579     )
580     if test "$config_force_filter" = "yes"; then
581     AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
582     fi
583    
584     AC_ARG_ENABLE(filter-cutoff-min,
585     [ --enable-filter-cutoff-min
586     Minimum filter cutoff frequency in Hz
587     (default=100.0).],
588     [config_filter_cutoff_min="${enableval}"],
589     [config_filter_cutoff_min="100.0"]
590     )
591     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
592    
593     AC_ARG_ENABLE(filter-cutoff-max,
594     [ --enable-filter-cutoff-max
595     Maximum filter cutoff frequency in Hz
596     (default=10000.0).],
597     [config_filter_cutoff_max="${enableval}"],
598     [config_filter_cutoff_max="10000.0"]
599     )
600     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
601    
602     AC_ARG_ENABLE(override-cutoff-ctrl,
603     [ --enable-override-cutoff-ctrl
604     Override filter cutoff MIDI controller (default=no).
605     Note: you have to define the MIDI controller number
606     here, it's not a boolean parameter type! If this
607     option is used, controller number given by
608     instrument patch will be ignored and instead this
609     supplied value will be used.],
610     [config_override_cutoff_ctrl="${enableval}"],
611     [config_override_cutoff_ctrl="no"]
612     )
613     if test ! "$config_override_cutoff_ctrl" = "no"; then
614     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
615     fi
616    
617     AC_ARG_ENABLE(override-resonance-ctrl,
618     [ --enable-override-resonance-ctrl
619     Override filter resonance MIDI controller
620     (default=no). Note: you have to define the MIDI
621     controller number here, it's not a boolean
622     parameter type! If this option is used, controller
623     number given by instrument patch will be ignored
624     and instead this supplied value will be used.],
625     [config_override_resonance_ctrl="${enableval}"],
626     [config_override_resonance_ctrl="no"]
627     )
628     if test ! "$config_override_resonance_ctrl" = "no"; then
629     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
630     fi
631    
632     AC_ARG_ENABLE(override-filter-type,
633     [ --enable-override-filter-type
634     Override filter type (default=no). Options:
635     hp: for highpass
636     bp: for bandpass
637     br: for bandreject
638     lp: for lowpass
639     lpt: for lowpass turbo],
640     [ if test "${enableval}" = "hp" ; then
641     config_override_filter_type="::gig::vcf_type_highpass"
642     elif test "${enableval}" = "bp" ; then
643     config_override_filter_type="::gig::vcf_type_bandpass"
644     elif test "${enableval}" = "br" ; then
645     config_override_filter_type="::gig::vcf_type_bandreject"
646     elif test "${enableval}" = "lp" ; then
647     config_override_filter_type="::gig::vcf_type_lowpass"
648     elif test "${enableval}" = "lpt" ; then
649     config_override_filter_type="::gig::vcf_type_lowpassturbo"
650     elif test ! "${enableval}" = "no"; then
651     AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
652 schoenebeck 579 fi
653 schoenebeck 554 ],
654     [config_override_filter_type="no"]
655     )
656     if test ! "$config_override_filter_type" = "no"; then
657     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
658     fi
659    
660 schoenebeck 563 AC_ARG_ENABLE(gs-checksum,
661     [ --enable-gs-checksum
662     Enable Roland General Synth SysEx checksum check
663     (default=no). If this is enabled, all GS SysEx
664     messages which do not provide a correct checksum
665     will be ignored. This is disabled by default as
666     not all devices honor GS checksums.],
667     [config_assert_gs_sysex_checksum="yes"],
668     [config_assert_gs_sysex_checksum="no"]
669     )
670     if test "config_assert_gs_sysex_checksum" = "yes"; then
671     AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
672     fi
673    
674 schoenebeck 829 AC_ARG_ENABLE(portamento-time-min,
675     [ --enable-portamento-time-min
676     Minimum Portamento time in seconds
677     (default=0.1).],
678     [config_portamento_time_min="${enableval}"],
679     [config_portamento_time_min="0.1"]
680     )
681     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
682    
683     AC_ARG_ENABLE(portamento-time-max,
684     [ --enable-portamento-time-max
685     Maximum Portamento time in seconds
686     (default=32).],
687     [config_portamento_time_max="${enableval}"],
688     [config_portamento_time_max="32"]
689     )
690     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
691    
692     AC_ARG_ENABLE(portamento-time-default,
693     [ --enable-portamento-time-default
694     Default Portamento time in seconds
695     (default=1).],
696     [config_portamento_time_default="${enableval}"],
697     [config_portamento_time_default="1"]
698     )
699     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
700    
701 schoenebeck 714 AC_ARG_ENABLE(signed-triang-algo,
702     [ --enable-signed-triang-algo
703     Signed triangular wave algorithm to be used (e.g. for LFOs).
704     Currently available options:
705     intmath:
706     Uses integer math without any branch will then be
707     converted to floating point value for each sample point.
708     This int->float conversion might hurt on some systems.
709 senkov 720 intmathabs:
710     Similar to intmath but uses abs() function.
711     Depending on compiler and platrofm this could
712     perform better than integer math as it avoids
713     an extra integer multiply instruction.
714    
715 schoenebeck 714 diharmonic:
716     The triangular wave will be approximated by adding two
717     sinusoidials. This solution might especially hurt on
718     systems with weak floating point unit.
719     benchmark (default):
720     This is not an algorithm. Use this option if the
721     appropriate algorithm should be automatically
722     chosen by the configure script by performing a
723     benchmark between the algorithms mentioned above.
724     This will NOT work for cross compilation!],
725     [ if test ! "(" "${enableval}" = "intmath" \
726 senkov 720 -o "${enableval}" = "intmathabs" \
727 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
728     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
729     else
730     config_signed_triang_algo="${enableval}"
731     fi
732     ],
733     [config_signed_triang_algo="benchmark"]
734     )
735 schoenebeck 563
736 schoenebeck 714 AC_ARG_ENABLE(unsigned-triang-algo,
737     [ --enable-unsigned-triang-algo
738     Unsigned triangular wave algorithm to be used (e.g. for LFOs).
739     Currently available options:
740     intmath:
741     Uses integer math without any branch will then be
742     converted to floating point value for each sample point.
743     This int->float conversion might hurt on some systems.
744 senkov 720 intmathabs:
745     Similar to intmath but uses abs() function.
746     Depending on compiler and platrofm this could
747     perform better than integer math as it avoids
748     an extra integer multiply instruction.
749    
750 schoenebeck 714 diharmonic:
751     The triangular wave will be approximated by adding two
752     sinusoidials. This solution might especially hurt on
753     systems with weak floating point unit.
754     benchmark (default):
755     This is not an algorithm. Use this option if the
756     appropriate algorithm should be automatically
757     chosen by the configure script by performing a
758     benchmark between the algorithms mentioned above.
759     This will NOT work for cross compilation!],
760     [ if test ! "(" "${enableval}" = "intmath" \
761 senkov 720 -o "${enableval}" = "intmathabs" \
762 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
763     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
764     else
765     config_unsigned_triang_algo="${enableval}"
766     fi
767     ],
768     [config_unsigned_triang_algo="benchmark"]
769     )
770    
771 iliev 716 AC_ARG_ENABLE(process-muted-channels,
772     [ --enable-process-muted-channels
773     Enable processing of muted channels (default=no).
774     In that mode all MIDI events in the muted channels
775     will be processed. This will provide information
776     about the active voices in the muted channels and
777     will not discard notes, triggered in mute mode,
778     when the channel is unmuted. But also will reduce
779     the efficiency.],
780     [config_process_muted_channels="yes"],
781     [config_process_muted_channels="no"]
782     )
783     if test "$config_process_muted_channels" = "yes"; then
784     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
785     fi
786 schoenebeck 714
787 schoenebeck 849 AC_ARG_ENABLE(process-all-notes-off,
788     [ --disable-process-all-notes-off
789     Disable interpretation of All-Notes-Off MIDI
790     messages (default=on). By default LS will release
791     all voices whenever it receives an All-Notes-Off
792     MIDI message. You can disable this behavior, so
793     that LS simply ignores such messages.],
794     [config_process_all_notes_off="no"],
795     [config_process_all_notes_off="yes"]
796     )
797     if test "$config_process_all_notes_off" = "yes"; then
798     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
799     fi
800    
801 persson 830 AC_ARG_ENABLE(interpolate-volume,
802     [ --disable-interpolate-volume
803     Disable interpolation of volume modulation
804     (default=on). With this enabled, the volume changes
805     generated by for example the envelope generator
806     will be smoother, minimizing the risk for audio
807     clicks. Disable it to reduce CPU usage.],
808     [config_interpolate_volume="no"],
809     [config_interpolate_volume="yes"]
810     )
811     if test "$config_interpolate_volume" = "yes"; then
812     AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
813     fi
814 iliev 716
815 persson 830
816 schoenebeck 554 ###########################################################################
817 schoenebeck 714 # Automatic Benchmarks (to detect the best algorithms for the system)
818    
819     AC_LANG_SAVE
820    
821     if test "$config_signed_triang_algo" = "benchmark"; then
822     echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
823     AC_LANG_CPLUSPLUS
824     AC_TRY_RUN([
825     #define SIGNED 1
826     #define SILENT 1
827 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
828 schoenebeck 714 ],
829     triang_signed=0,
830     triang_signed=$?,
831     triang_signed=0
832     )
833     if test "$triang_signed" = "2"; then
834     config_signed_triang_algo="intmath"
835     echo "integer math"
836     elif test "$triang_signed" = "3"; then
837     config_signed_triang_algo="diharmonic"
838     echo "di harmonics"
839 senkov 720 elif test "$triang_signed" = "5"; then
840     config_signed_triang_algo="intmathabs"
841     echo "integer math using abs()"
842 schoenebeck 714 else
843     echo "Benchmark of signed triangular wave algorithms failed!"
844     echo "Maybe you are doing cross compilation? In that case you have to select"
845     echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
846     echo "Call './configure --help' for further information or read configure.in."
847     exit -1;
848     fi
849     fi
850 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
851 schoenebeck 714
852     if test "$config_unsigned_triang_algo" = "benchmark"; then
853     echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
854     AC_LANG_CPLUSPLUS
855     AC_TRY_RUN([
856     #define SIGNED 0
857     #define SILENT 1
858 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
859 schoenebeck 714 ],
860     triang_unsigned=0,
861     triang_unsigned=$?,
862     triang_unsigned=0
863     )
864     if test "$triang_unsigned" = "2"; then
865     config_unsigned_triang_algo="intmath"
866     echo "integer math"
867     elif test "$triang_unsigned" = "3"; then
868     config_unsigned_triang_algo="diharmonic"
869     echo "di harmonics"
870 senkov 720 elif test "$triang_unsigned" = "5"; then
871 schoenebeck 726 config_unsigned_triang_algo="intmathabs"
872 senkov 720 echo "integer math using abs()"
873 schoenebeck 714 else
874     echo "Benchmark of unsigned triangular wave algorithms failed!"
875     echo "Maybe you are doing cross compilation? In that case you have to select"
876     echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
877     echo "Call './configure --help' for further information or read configure.in."
878     exit -1;
879     fi
880     fi
881 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
882 schoenebeck 714
883     AC_LANG_RESTORE
884    
885    
886     ###########################################################################
887 schoenebeck 554 # Create Build Files
888    
889 schoenebeck 9 AM_CONFIG_HEADER(config.h)
890 schoenebeck 697 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
891 schoenebeck 9
892     AC_LANG_CPLUSPLUS
893     AC_PROG_CXX
894 persson 497
895 persson 685 # some gcc 4.0 versions need -msse for SSE register allocations
896     if test "$config_asm" = "yes"; then
897     if test "$def_arch_x86" = 1; then
898     CXXFLAGS="$CXXFLAGS -msse"
899     fi
900     fi
901    
902 persson 497 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
903     # this, the dlfcn.h check in am_prog_libtool may fail.
904     AC_CHECK_HEADER(stdlib.h)
905    
906 schoenebeck 654 AC_OUTPUT( \
907     Makefile \
908     man/Makefile \
909     man/linuxsampler.1 \
910     src/Makefile \
911     src/network/Makefile \
912     src/engines/Makefile \
913     src/engines/gig/Makefile \
914     src/engines/common/Makefile \
915     src/common/Makefile src/lib/Makefile \
916     src/lib/fileloader/Makefile \
917     src/lib/fileloader/libgig/Makefile \
918     src/testcases/Makefile \
919     src/drivers/Makefile \
920     src/drivers/audio/Makefile \
921     src/drivers/midi/Makefile \
922     linuxsampler.spec \
923     debian/Makefile \
924     Artwork/Makefile \
925     scripts/Makefile \
926     osx/Makefile \
927     osx/LinuxSampler.xcode/Makefile \
928     Documentation/Makefile \
929     Documentation/Engines/Makefile \
930     Documentation/Engines/gig/Makefile \
931 schoenebeck 697 linuxsampler.pc \
932     Doxyfile \
933 schoenebeck 654 )
934 schoenebeck 554
935    
936     ###########################################################################
937     # Output All Configuration Options
938    
939     echo ""
940     echo "#####################################################################"
941     echo "# LinuxSampler Configuration #"
942     echo "#-------------------------------------------------------------------#"
943 schoenebeck 617 echo "# Assembly Optimizations: ${config_asm}"
944 schoenebeck 554 echo "# Development Mode: ${config_dev_mode}"
945     echo "# Debug Level: ${config_debug_level}"
946     echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
947     echo "# Preload Samples: ${config_preload_samples}"
948     echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
949     echo "# Maximum Events: ${config_max_events}"
950     echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
951     echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
952     echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
953     echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
954     echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
955     echo "# Stream Size: ${config_stream_size}"
956     echo "# Maximum Disk Streams: ${config_max_streams}"
957     echo "# Maximum Voices: ${config_max_voices}"
958 schoenebeck 738 echo "# Default Subfragment Size: ${config_subfragment_size}"
959 schoenebeck 781 echo "# Global Volume Attenuation: ${config_global_attenuation}"
960 schoenebeck 563 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
961 schoenebeck 714 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
962     echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
963 schoenebeck 554 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
964 schoenebeck 829 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
965     echo "# Max. Portamento Time: ${config_portamento_time_max} s"
966     echo "# Default Portamento Time: ${config_portamento_time_default} s"
967 schoenebeck 554 echo "# Force Filter Usage: ${config_force_filter}"
968     echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
969     echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
970     echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
971     echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
972     echo "# Override Filter Type: ${config_override_filter_type}"
973 schoenebeck 563 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
974 iliev 716 echo "# Process Muted Channels: ${config_process_muted_channels}"
975 schoenebeck 849 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
976 persson 830 echo "# Interpolate Volume: ${config_interpolate_volume}"
977 schoenebeck 554 echo "#-------------------------------------------------------------------#"
978     echo "# Read './configure --help' or file 'configure.in' for details. #"
979     echo "#####################################################################"
980     echo ""
981     echo "Good. Now type 'make' to compile, followed by 'make install' as root."
982     echo ""

  ViewVC Help
Powered by ViewVC