/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Diff of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 18 by schoenebeck, Sun Dec 7 05:03:43 2003 UTC revision 1259 by schoenebeck, Tue Jun 26 21:41:09 2007 UTC
# Line 1  Line 1 
1  AC_INIT(configure.in)  AC_INIT(configure.in)
2    
3    #------------------------------------------------------------------------------------
4    # LinuxSampler's / liblinuxsampler's "official" release version:
5    
6    LINUXSAMPLER_RELEASE_MAJOR=0
7    LINUXSAMPLER_RELEASE_MINOR=4
8    LINUXSAMPLER_RELEASE_BUILD=0.6cvs
9    
10    #------------------------------------------------------------------------------------
11    # The following is the libtool / shared library version. This doesn't have to
12    # do anything with the release version. It MUST conform to the following rules:
13    #
14    #  1. Start with version information of `0:0:0' for each libtool library.
15    #  2. Update the version information only immediately before a public release of
16    #     your software. More frequent updates are unnecessary, and only guarantee
17    #     that the current interface number gets larger faster.
18    #  3. If the library source code has changed at all since the last update, then
19    #     increment revision (`c:r:a' becomes `c:r+1:a').
20    #  4. If any interfaces have been added, removed, or changed since the last update,
21    #     increment current, and set revision to 0.
22    #  5. If any interfaces have been added since the last public release, then increment
23    #     age.
24    #  6. If any interfaces have been removed since the last public release, then set age
25    #     to 0.
26    
27    LIBLINUXSAMPLER_LT_CURRENT=0
28    LIBLINUXSAMPLER_LT_REVISION=0
29    LIBLINUXSAMPLER_LT_AGE=0
30    SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31    
32    #------------------------------------------------------------------------------------
33    # the LSCP specification version this LinuSampler release complies with:
34    
35    LSCP_RELEASE_MAJOR=1
36    LSCP_RELEASE_MINOR=2
37    
38    AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39    AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40    
41    AM_PROG_LIBTOOL
42    
43    AC_SUBST(SHLIB_VERSION_ARG)
44    AC_SUBST(SHARED_VERSION_INFO)
45    
46  AC_C_BIGENDIAN  AC_C_BIGENDIAN
47  AC_CANONICAL_SYSTEM  AC_CANONICAL_SYSTEM
48    
49    AC_SUBST(target)
50    AC_SUBST(target_alias)
51    AC_SUBST(target_cpu)
52    AC_SUBST(target_os)
53    AC_SUBST(target_vendor)
54    
55  echo -n "checking whether x86 architecture... "  
56    ###########################################################################
57    # General Checks
58    
59    AC_MSG_CHECKING([whether x86 architecture])
60  def_arch_x86=0  def_arch_x86=0
61  case $target_cpu in  case $target_cpu in
62    "i386" | "i486" | "i586" | "i686" | "i786")    "i386" | "i486" | "i586" | "i686" | "i786")
# Line 14  case $target_cpu in Line 67  case $target_cpu in
67  esac  esac
68  AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])  AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
69    
70    # determine the right gcc switch for CPU specific optimizations
71  AC_CHECK_HEADER(alsa/asoundlib.h,  # (only if the user did not provide one)
72      AC_CHECK_LIB(asound, main,  CXX_CPU_SWITCH=
73                               have_alsa="true"  if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
74                               ,    if test "$def_arch_x86" = 1; then
75                               have_alsa="false"      CXX_CPU_SWITCH="-march=$target_cpu"
76                  )    elif test "$target_cpu" = "ppc"; then
77                  ,      CXX_CPU_SWITCH="-arch=$target_cpu"
78                  have_alsa="false"    fi
 )  
 if test "$have_alsa" = "false"; then  
     echo "Alsa not installed!"  
     echo "Sorry, LinuxSampler only supports Alsa sound drivers at the moment!"  
     exit -1;  
79  fi  fi
80    AC_SUBST([CXX_CPU_SWITCH])
81    
82    AC_MSG_CHECKING([whether UNIX98 compatible])
 echo -n "checking Alsa version... "  
83  AC_LANG_SAVE  AC_LANG_SAVE
84  AC_LANG_C  AC_LANG_C
85  AC_TRY_RUN([  AC_TRY_RUN([
86  #include <alsa/asoundlib.h>  #ifndef _GNU_SOURCE
87  void main(void) {  #define _GNU_SOURCE 1
 /* ensure backward compatibility */  
 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)  
 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR  
88  #endif  #endif
89  exit(SND_LIB_MAJOR);  #include <features.h>
 }  
 ],  
 alsa_major=0,  
 alsa_major=$?,  
 alsa_major=0  
 )  
 AC_TRY_RUN([  
 #include <alsa/asoundlib.h>  
90  void main(void) {  void main(void) {
91  /* ensure backward compatibility */  #if _XOPEN_SOURCE >= 500
92  #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)  exit(0); /* UNIX98 compatible */
93  #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR  #else
94    exit(-1); /* not UNIX98 compatible */
95  #endif  #endif
 exit(SND_LIB_MINOR);  
96  }  }
97  ],  ],
98  alsa_minor=0,  have_unix98="yes",
99  alsa_minor=$?,  have_unix98="no",
100  alsa_minor=0  have_unix98="no"
101  )  )
102  AC_TRY_RUN([  AC_LANG_RESTORE
103  #include <alsa/asoundlib.h>  AC_MSG_RESULT([$have_unix98])
104  void main(void) {  if test "$have_unix98" = "no"; then
105  /* ensure backward compatibility */      if test "x$HAVE_UNIX98" = "x"; then
106  #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)          echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
107  #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR          echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
108  #endif          echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
109  exit(SND_LIB_SUBMINOR);          echo "have a UNIX98 compatible system."
110  }          exit -1;
111  ],      fi
112  alsa_subminor=0,  fi
113  alsa_subminor=$?,  
114  alsa_subminor=0  # check for <features.h>
115    AC_CHECK_HEADERS(features.h)
116    
117    
118    ###########################################################################
119    # Checks for available audio and MIDI systems / drivers
120    # (we throw an error if there's not at least one system for audio output and MIDI input available)
121    
122    have_midi_input_driver="false"
123    have_audio_output_driver="false"
124    
125    # ALSA
126    AC_ARG_ENABLE(alsa-driver,
127      [  --disable-alsa-driver
128                              Disable support for the Advanced Linux Sound
129                              Architecture (ALSA).],
130      [config_alsa_driver="no"],
131      [config_alsa_driver="yes"]
132    )
133    have_alsa=0
134    if test "$config_alsa_driver" = "yes"; then
135        AC_CHECK_HEADER(alsa/asoundlib.h,
136            AC_CHECK_LIB(asound, main,
137                                     have_alsa=1
138                                     ,
139                                     have_alsa=0
140                        )
141                        ,
142                        have_alsa=0
143        )
144        if test "$have_alsa" = "1"; then
145            have_midi_input_driver="true"
146            have_audio_output_driver="true";
147        fi
148    
149        echo -n "checking Alsa version... "
150        AC_LANG_SAVE
151        AC_LANG_C
152        AC_TRY_RUN([
153            #include <alsa/asoundlib.h>
154            void main(void) {
155                /* ensure backward compatibility */
156                #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
157                #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
158                #endif
159                exit(SND_LIB_MAJOR);
160            }
161        ],
162        alsa_major=0,
163        alsa_major=$?,
164        alsa_major=0
165        )
166        AC_TRY_RUN([
167            #include <alsa/asoundlib.h>
168            void main(void) {
169                /* ensure backward compatibility */
170                #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
171                #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
172                #endif
173                exit(SND_LIB_MINOR);
174            }
175        ],
176        alsa_minor=0,
177        alsa_minor=$?,
178        alsa_minor=0
179        )
180        AC_TRY_RUN([
181            #include <alsa/asoundlib.h>
182            void main(void) {
183                /* ensure backward compatibility */
184                #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
185                #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
186                #endif
187                exit(SND_LIB_SUBMINOR);
188            }
189        ],
190        alsa_subminor=0,
191        alsa_subminor=$?,
192        alsa_subminor=0
193        )
194        AC_LANG_RESTORE
195        echo "$alsa_major.$alsa_minor.$alsa_subminor";
196        AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
197        AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
198        AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
199    else
200        echo "ALSA support disabled by configure script parameter"
201    fi
202    AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
203    AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
204    
205    # JACK
206    AC_ARG_ENABLE(jack-driver,
207      [  --disable-jack-driver
208                              Disable support for the Jack Audio Connection Kit
209                              (JACK).],
210      [config_jack_driver="no"],
211      [config_jack_driver="yes"]
212    )
213    have_jack=0
214    if test "$config_jack_driver" = "yes"; then
215        PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
216        if test $have_jack = "1"; then
217            AC_SUBST(JACK_LIBS)
218            AC_SUBST(JACK_CFLAGS)
219            AC_CHECK_LIB(jack, jack_client_name_size, [AC_DEFINE(HAVE_JACK_CLIENT_NAME_SIZE, 1, [Define to 1 if you have the `jack_client_name_size' function.])], , $JACK_LIBS)
220            have_audio_output_driver="true";
221        fi
222    else
223        echo "JACK support disabled by configure script parameter"
224    fi
225    AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
226    AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
227    
228    # ARTS
229    AC_ARG_ENABLE(arts-driver,
230      [  --disable-arts-driver
231                              Disable support for the Analogue Realtime System
232                              (aRts).],
233      [config_arts_driver="no"],
234      [config_arts_driver="yes"]
235    )
236    have_arts=0
237    if test "$config_arts_driver" = "yes"; then
238        m4_ifdef([m4_include(m4/arts.m4)],,
239                 [sinclude([m4/arts.m4])])
240        AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
241        if test "$have_arts" = "1"; then
242            have_audio_output_driver="true"
243        fi
244    else
245        echo "ARTS support disabled by configure script parameter"
246    fi
247    AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
248    AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
249    
250    # MidiShare (Linux, OS X, Windows)
251    AC_ARG_ENABLE(midishare-driver,
252      [  --disable-midishare-driver
253                              Disable support for the MidiShare system.],
254      [config_midishare_driver="no"],
255      [config_midishare_driver="yes"]
256    )
257    have_midishare=0
258    if test "$config_midishare_driver" = "yes"; then
259        AC_CHECK_HEADER(MidiShare.h,
260            AC_CHECK_LIB(MidiShare, MidiCountEvs,
261                                    have_midishare=1,
262                                    have_midishare=0
263                        )
264                        ,
265                        have_midishare=0
266        )
267        if test "$have_midishare" = "1"; then
268            have_midi_input_driver="true"
269        fi
270    else
271        echo "MidiShare support disabled by configure script parameter"
272    fi
273    AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
274    AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
275    
276    # CoreMIDI (OS X)
277    AC_ARG_ENABLE(coremidi-driver,
278      [  --disable-coremidi-driver
279                              Disable support for the Apple CoreMIDI system.],
280      [config_coremidi_driver="no"],
281      [config_coremidi_driver="yes"]
282    )
283    have_coremidi=0
284    if test "$config_coremidi_driver" = "yes"; then
285        AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
286            have_coremidi=1,
287            have_coremidi=0
288        )
289        if test "$have_coremidi" = "1"; then
290            have_midi_input_driver="true"
291        fi
292    else
293        echo "CoreMIDI support disabled by configure script parameter"
294    fi
295    AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
296    AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
297    
298    # Check presence of libgig
299    libgig_version="3.1.1"
300    PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
301    if test "$HAVE_GIG" = "false"; then
302        echo "Required libgig version not found!"
303        echo "You need to have libgig version ${libgig_version} installed!"
304        exit -1;
305    else
306        echo "yes, found libgig $libgig_version"
307    fi
308    AC_SUBST(GIG_CFLAGS)
309    AC_SUBST(GIG_LIBS)
310    
311    # Check presence of sqlite3
312    sqlite_version="3.3"
313    PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
314    AC_SUBST(SQLITE3_LIBS)
315    AC_SUBST(SQLITE3_CFLAGS)
316    if test $HAVE_SQLITE3 = false; then
317        HAVE_SQLITE3=0;
318        instruments_db_support="no"
319        echo "*** Required sqlite version not found!"
320        echo "*** You need to have sqlite version ${sqlite_version} or higher"
321        echo "*** for instruments database support to be enabled."
322        echo "*** Support for instruments DB will be disabled!"
323    else
324        HAVE_SQLITE3=1
325        instruments_db_support="yes"
326    fi
327    AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
328    AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you have SQLITE3 installed.])
329    
330    if test "$have_midi_input_driver" = "false"; then
331        echo "No supported MIDI input system found!"
332        echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
333        echo "ALSA, MIDIShare, CoreMIDI."
334        echo "If you think you have one of those available on your system, make sure you"
335        echo "also have the respective development (header) files installed."
336        exit -1;
337    fi
338    if test "$have_audio_output_driver" = "false"; then
339        echo "No supported audio output system found!"
340        echo "Sorry, LinuxSampler only supports ALSA and JACK as audio output driver at the moment!"
341        exit -1;
342    fi
343    
344    
345    ###########################################################################
346    # Handle Configuration Options
347    
348    # TODO: should we use AC_ARG_VAR(variable, description) instead?
349    
350    AC_ARG_ENABLE(asm,
351      [  --disable-asm
352                              Enable hand-crafted assembly optimizations
353                              (default=on). LinuxSampler provides CPU specific
354                              assembly optimizations. This is currently limited
355                              to just enter a fast (denormal) FPU mode on x86
356                              platforms. There are currently no synthesis core
357                              assembly optimizations anymore since LS 0.4.0],
358      [config_asm="no"],
359      [config_asm="yes"]
360    )
361    if test "$config_asm" = "yes"; then
362      AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
363    fi
364    
365    AC_ARG_ENABLE(dev-mode,
366      [  --disable-dev-mode
367                              Disable development mode (default=on). In that mode
368                              we do some extra sanity checks here and there.
369                              This helps to spot possible problems, but reduces
370                              efficiency a bit],
371      [config_dev_mode="no"],
372      [config_dev_mode="yes"]
373    )
374    if test "$config_dev_mode" = "yes"; then
375      AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
376    fi
377    
378    AC_ARG_ENABLE(debug-level,
379      [  --enable-debug-level
380                              Specify verbosity of console messages (default=1).
381                              The higher the value, the higher will be verbosity.
382                              A value of 0 means no console output at all.
383                              There's not really an upper limit but the usual
384                              level of all messages is currently somewhere less
385                              than 10.],
386      [config_debug_level="${enableval}"],
387      [config_debug_level="1"]
388    )
389    AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
390    
391    AC_ARG_ENABLE(rt-exceptions,
392      [  --enable-rt-exceptions
393                              Enable exceptions in the realtime thread
394                              (default=no). If this is enabled, exceptions will
395                              be thrown on critical errors in the realtime
396                              context as well. Otherwise if disabled
397                              segmentation faults will be forced by the
398                              application on critical errors.],
399      [config_rt_exceptions="yes"],
400      [config_rt_exceptions="no"]
401    )
402    if test "$config_rt_exceptions" = "yes"; then
403      AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
404    fi
405    
406    AC_ARG_ENABLE(preload-samples,
407      [  --enable-preload-samples
408                              Due to seeking and latency issues with hard drives
409                              we have to cache a small part of samples' head in
410                              RAM (default=32768). The higher this value the
411                              more memory will be occupied for each sample, but
412                              the safer this will be in regards of possible
413                              droputs. A 'good' value depends on the running
414                              system and usage dependant factors.],
415      [config_preload_samples="${enableval}"],
416      [config_preload_samples="32768"]
417    )
418    AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
419    
420    AC_ARG_ENABLE(max-pitch,
421      [  --enable-max-pitch
422                              Specify the maximum allowed pitch value in octaves
423                              (default=4). To lower memory usage you might want
424                              set a smaller value.],
425      [config_max_pitch="${enableval}"],
426      [config_max_pitch="4"]
427    )
428    AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
429    
430    AC_ARG_ENABLE(max-events,
431      [  --enable-max-events
432                              Specify the maximum allowed amount of events to be
433                              processed per fragment (default=1024).],
434      [config_max_events="${enableval}"],
435      [config_max_events="1024"]
436    )
437    AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
438    
439    AC_ARG_ENABLE(eg-bottom,
440      [  --enable-eg-bottom
441                              Bottom limit of envelope generators
442                              (default=0.001). Certain kinds of curve types like
443                              exponential curves converge against 0 but never
444                              reach 0. So we have to define a certain low value
445                              after which we should consider all smaller values
446                              to be 'almost zero'. The smaller this value, the
447                              longer will voices survive in EG's release stage
448                              and thus waste voices. If this value is too high
449                              will cause click sounds though.],
450      [config_eg_bottom="${enableval}"],
451      [config_eg_bottom="0.001"]
452    )
453    AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
454    
455    AC_ARG_ENABLE(eg-min-release-time,
456      [  --enable-eg-min-release-time
457                              Specify the lowest allowed release time in seconds
458                              (default=0.0025). This value will also be used to
459                              ramp down voices on voice stealing. This value
460                              should always be less than the period time of the
461                              used audio driver, as in case of voice stealing
462                              the killed voice needs to be completely ramped
463                              down in the same fragment.],
464      [config_eg_min_release_time="${enableval}"],
465      [config_eg_min_release_time="0.0025"]
466  )  )
467    AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
468    
469    AC_ARG_ENABLE(refill-streams,
470      [  --enable-refill-streams
471                              Number of streams that should be refilled in each
472                              disk thread cycle (default=4).],
473      [config_refill_streams="${enableval}"],
474      [config_refill_streams="4"]
475    )
476    AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
477    
478    AC_ARG_ENABLE(stream-min-refill,
479      [  --enable-stream-min-refill
480                              Minimum refill size for disk streams (default=1024).
481                              The disk thread will go to sleep for a while if no
482                              stream had to be refilled more than this value in
483                              a disk thread cycle.],
484      [config_stream_min_refill="${enableval}"],
485      [config_stream_min_refill="1024"]
486    )
487    AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
488    
489    AC_ARG_ENABLE(stream-max-refill,
490      [  --enable-stream-max-refill
491                              Maximum refill size for disk streams
492                              (default=65536). The disk thread will refill
493                              each stream only by a size of this value per
494                              disk thread cycle.],
495      [config_stream_max_refill="${enableval}"],
496      [config_stream_max_refill="65536"]
497    )
498    AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
499    
500    AC_ARG_ENABLE(stream-size,
501      [  --enable-stream-size
502                              Size of each stream's ring buffer in sample points
503                              (default=262144).],
504      [config_stream_size="${enableval}"],
505      [config_stream_size="262144"]
506    )
507    AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
508    
509    AC_ARG_ENABLE(max-streams,
510      [  --enable-max-streams
511                              Maximum amount of disk streams (default=90). This
512                              value should always be higher than the maximum
513                              amount of voices.],
514      [config_max_streams="${enableval}"],
515      [config_max_streams="90"]
516    )
517    AC_DEFINE_UNQUOTED(CONFIG_MAX_STREAMS, $config_max_streams, [Define max. streams.])
518    
519    AC_ARG_ENABLE(max-voices,
520      [  --enable-max-voices
521                              Maximum amount of voices (default=64). This value
522                              should always be lower than the maximum amount of
523                              disk streams.],
524      [config_max_voices="${enableval}"],
525      [config_max_voices="64"]
526    )
527    AC_DEFINE_UNQUOTED(CONFIG_MAX_VOICES, $config_max_voices, [Define max. voices.])
528    
529    AC_ARG_ENABLE(subfragment-size,
530      [  --enable-subfragment-size
531                              Every audio fragment will be splitted into
532                              subfragments. Where each subfragment renders
533                              audio with constant synthesis parameters. This is
534                              done for efficiency reasons. This parameter
535                              defines the default size of a subfragment in
536                              sample points. A large value means less CPU time
537                              whereas a low value means better audio quality
538                              (default=32).],
539      [config_subfragment_size="${enableval}"],
540      [config_subfragment_size="32"]
541    )
542    AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
543    
544    AC_ARG_ENABLE(global-attenuation-default,
545      [  --enable-global-attenuation-default
546                              To prevent clipping all samples will be lowered
547                              in amplitude by this given default factor (can
548                              be overridden at runtime).
549                              (default=0.35)],
550      [config_global_attenuation_default="${enableval}"],
551      [config_global_attenuation_default="0.35"]
552    )
553    AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
554    
555    AC_ARG_ENABLE(voice-steal-algo,
556      [  --enable-voice-steal-algo
557                              Voice stealing algorithm to be used. Currently
558                              available options:
559                                none:
560                                  Disable voice stealing completely.
561                                oldestvoiceonkey (default):
562                                  Try to kill a voice on the same key first,
563                                  if no success, proceed with the oldest key.
564                                oldestkey:
565                                  Try to kill a voice from the oldest active
566                                  key.],
567      [ if test ! "(" "${enableval}" = "none" \
568                  -o "${enableval}" = "oldestvoiceonkey" \
569                  -o "${enableval}" = "oldestkey" ")" ; then
570          AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
571        else
572          config_voice_steal_algo="${enableval}"
573        fi
574      ],
575      [config_voice_steal_algo="oldestvoiceonkey"]
576    )
577    AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
578    
579    AC_ARG_ENABLE(sysex-buffer-size,
580      [  --enable-sysex-buffer-size
581                              System Exclusive Message buffer size in kB
582                              (default=2048).],
583      [config_sysex_buffer_size="${enableval}"],
584      [config_sysex_buffer_size="2048"]
585    )
586    AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
587    
588    AC_ARG_ENABLE(force-filter,
589      [  --enable-force-filter
590                              If enabled will force filter to be used even if
591                              no usage was define in instrument patch files.
592                              (default=no).],
593      [config_force_filter="yes"],
594      [config_force_filter="no"]
595    )
596    if test "$config_force_filter" = "yes"; then
597      AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
598    fi
599    
600    AC_ARG_ENABLE(filter-cutoff-min,
601      [  --enable-filter-cutoff-min
602                              Minimum filter cutoff frequency in Hz
603                              (default=100.0).],
604      [config_filter_cutoff_min="${enableval}"],
605      [config_filter_cutoff_min="100.0"]
606    )
607    AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
608    
609    AC_ARG_ENABLE(filter-cutoff-max,
610      [  --enable-filter-cutoff-max
611                              Maximum filter cutoff frequency in Hz
612                              (default=10000.0).],
613      [config_filter_cutoff_max="${enableval}"],
614      [config_filter_cutoff_max="10000.0"]
615    )
616    AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
617    
618    AC_ARG_ENABLE(override-cutoff-ctrl,
619      [  --enable-override-cutoff-ctrl
620                              Override filter cutoff MIDI controller (default=no).
621                              Note: you have to define the MIDI controller number
622                              here, it's not a boolean parameter type! If this
623                              option is used, controller number given by
624                              instrument patch will be ignored and instead this
625                              supplied value will be used.],
626      [config_override_cutoff_ctrl="${enableval}"],
627      [config_override_cutoff_ctrl="no"]
628    )
629    if test ! "$config_override_cutoff_ctrl" = "no"; then
630      AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
631    fi
632    
633    AC_ARG_ENABLE(override-resonance-ctrl,
634      [  --enable-override-resonance-ctrl
635                              Override filter resonance MIDI controller
636                              (default=no). Note: you have to define the MIDI
637                              controller number here, it's not a boolean
638                              parameter type! If this option is used, controller
639                              number given by instrument patch will be ignored
640                              and instead this supplied value will be used.],
641      [config_override_resonance_ctrl="${enableval}"],
642      [config_override_resonance_ctrl="no"]
643    )
644    if test ! "$config_override_resonance_ctrl" = "no"; then
645      AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
646    fi
647    
648    AC_ARG_ENABLE(override-filter-type,
649      [  --enable-override-filter-type
650                              Override filter type (default=no). Options:
651                              hp: for highpass
652                              bp: for bandpass
653                              br: for bandreject
654                              lp: for lowpass
655                              lpt: for lowpass turbo],
656      [ if   test "${enableval}" = "hp" ; then
657           config_override_filter_type="::gig::vcf_type_highpass"
658        elif test "${enableval}" = "bp" ; then
659           config_override_filter_type="::gig::vcf_type_bandpass"
660        elif test "${enableval}" = "br" ; then
661           config_override_filter_type="::gig::vcf_type_bandreject"
662        elif test "${enableval}" = "lp" ; then
663           config_override_filter_type="::gig::vcf_type_lowpass"
664        elif test "${enableval}" = "lpt" ; then
665           config_override_filter_type="::gig::vcf_type_lowpassturbo"
666        elif test ! "${enableval}" = "no"; then
667           AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
668        fi
669      ],
670      [config_override_filter_type="no"]
671    )
672    if test ! "$config_override_filter_type" = "no"; then
673      AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
674    fi
675    
676    AC_ARG_ENABLE(gs-checksum,
677      [  --enable-gs-checksum
678                              Enable Roland General Synth SysEx checksum check
679                              (default=no). If this is enabled, all GS SysEx
680                              messages which do not provide a correct checksum
681                              will be ignored. This is disabled by default as
682                              not all devices honor GS checksums.],
683      [config_assert_gs_sysex_checksum="yes"],
684      [config_assert_gs_sysex_checksum="no"]
685    )
686    if test "config_assert_gs_sysex_checksum" = "yes"; then
687      AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
688    fi
689    
690    AC_ARG_ENABLE(portamento-time-min,
691      [  --enable-portamento-time-min
692                              Minimum Portamento time in seconds
693                              (default=0.1).],
694      [config_portamento_time_min="${enableval}"],
695      [config_portamento_time_min="0.1"]
696    )
697    AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
698    
699    AC_ARG_ENABLE(portamento-time-max,
700      [  --enable-portamento-time-max
701                              Maximum Portamento time in seconds
702                              (default=32).],
703      [config_portamento_time_max="${enableval}"],
704      [config_portamento_time_max="32"]
705    )
706    AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
707    
708    AC_ARG_ENABLE(portamento-time-default,
709      [  --enable-portamento-time-default
710                              Default Portamento time in seconds
711                              (default=1).],
712      [config_portamento_time_default="${enableval}"],
713      [config_portamento_time_default="1"]
714    )
715    AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
716    
717    AC_ARG_ENABLE(signed-triang-algo,
718      [  --enable-signed-triang-algo
719                              Signed triangular wave algorithm to be used (e.g. for LFOs).
720                              Currently available options:
721                                intmath:
722                                  Uses integer math without any branch will then be
723                                  converted to floating point value for each sample point.
724                                  This int->float conversion might hurt on some systems.
725                                intmathabs:
726                                  Similar to intmath but uses abs() function.
727                                  Depending on compiler and platrofm this could
728                                  perform better than integer math as it avoids
729                                  an extra integer multiply instruction.
730    
731                                diharmonic:
732                                  The triangular wave will be approximated by adding two
733                                  sinusoidials. This solution might especially hurt on
734                                  systems with weak floating point unit.
735                                benchmark (default):
736                                  This is not an algorithm. Use this option if the
737                                  appropriate algorithm should be automatically
738                                  chosen by the configure script by performing a
739                                  benchmark between the algorithms mentioned above.
740                                  This will NOT work for cross compilation!],
741      [ if test ! "(" "${enableval}" = "intmath" \
742                  -o "${enableval}" = "intmathabs" \
743                  -o "${enableval}" = "diharmonic" ")" ; then
744          AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
745        else
746          config_signed_triang_algo="${enableval}"
747        fi
748      ],
749      [config_signed_triang_algo="benchmark"]
750    )
751    
752    AC_ARG_ENABLE(unsigned-triang-algo,
753      [  --enable-unsigned-triang-algo
754                              Unsigned triangular wave algorithm to be used (e.g. for LFOs).
755                              Currently available options:
756                                intmath:
757                                  Uses integer math without any branch will then be
758                                  converted to floating point value for each sample point.
759                                  This int->float conversion might hurt on some systems.
760                                intmathabs:
761                                  Similar to intmath but uses abs() function.
762                                  Depending on compiler and platrofm this could
763                                  perform better than integer math as it avoids
764                                  an extra integer multiply instruction.
765    
766                                diharmonic:
767                                  The triangular wave will be approximated by adding two
768                                  sinusoidials. This solution might especially hurt on
769                                  systems with weak floating point unit.
770                                benchmark (default):
771                                  This is not an algorithm. Use this option if the
772                                  appropriate algorithm should be automatically
773                                  chosen by the configure script by performing a
774                                  benchmark between the algorithms mentioned above.
775                                  This will NOT work for cross compilation!],
776      [ if test ! "(" "${enableval}" = "intmath" \
777                  -o "${enableval}" = "intmathabs" \
778                  -o "${enableval}" = "diharmonic" ")" ; then
779          AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
780        else
781          config_unsigned_triang_algo="${enableval}"
782        fi
783      ],
784      [config_unsigned_triang_algo="benchmark"]
785    )
786    
787    AC_ARG_ENABLE(process-muted-channels,
788      [  --enable-process-muted-channels
789                              Enable processing of muted channels (default=no).
790                              In that mode all MIDI events in the muted channels
791                              will be processed. This will provide information
792                              about the active voices in the muted channels and
793                              will not discard notes, triggered in mute mode,
794                              when the channel is unmuted. But also will reduce
795                              the efficiency.],
796      [config_process_muted_channels="yes"],
797      [config_process_muted_channels="no"]
798    )
799    if test "$config_process_muted_channels" = "yes"; then
800      AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
801    fi
802    
803    AC_ARG_ENABLE(process-all-notes-off,
804      [  --disable-process-all-notes-off
805                              Disable interpretation of All-Notes-Off MIDI
806                              messages (default=on). By default LS will release
807                              all voices whenever it receives an All-Notes-Off
808                              MIDI message. You can disable this behavior, so
809                              that LS simply ignores such messages.],
810      [config_process_all_notes_off="no"],
811      [config_process_all_notes_off="yes"]
812    )
813    if test "$config_process_all_notes_off" = "yes"; then
814      AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
815    fi
816    
817    AC_ARG_ENABLE(interpolate-volume,
818      [  --disable-interpolate-volume
819                              Disable interpolation of volume modulation
820                              (default=on). With this enabled, the volume changes
821                              generated by for example the envelope generator
822                              will be smoother, minimizing the risk for audio
823                              clicks. Disable it to reduce CPU usage.],
824      [config_interpolate_volume="no"],
825      [config_interpolate_volume="yes"]
826    )
827    if test "$config_interpolate_volume" = "yes"; then
828      AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
829    fi
830    
831    AC_ARG_ENABLE(plugin-dir,
832      [  --enable-plugin-dir
833                              Directory where the sampler shall look for potential plugins,
834                              that is 3rd party shared libraries that should be loaded by
835                              the sampler on startup. By default the sampler will search
836                              for plugins in the subdirectory "plugins" below its own
837                              library directory.
838                              (i.e. /usr/local/lib/linuxsampler/plugins)],
839      [config_plugin_dir="${enableval}"],
840      [config_plugin_dir="${libdir}/linuxsampler/plugins"]
841    )
842    AC_SUBST(config_plugin_dir)
843    
844    
845    ###########################################################################
846    # Automatic Benchmarks (to detect the best algorithms for the system)
847    
848    AC_LANG_SAVE
849    
850    if test "$config_signed_triang_algo" = "benchmark"; then
851        echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
852        AC_LANG_CPLUSPLUS
853        AC_TRY_RUN([
854                #define SIGNED 1
855                #define SILENT 1
856                #include "${srcdir}/benchmarks/triang.cpp"
857            ],
858            triang_signed=0,
859            triang_signed=$?,
860            triang_signed=0
861        )
862        if test "$triang_signed" = "2"; then
863            config_signed_triang_algo="intmath"
864            echo "integer math"
865        elif test "$triang_signed" = "3"; then
866            config_signed_triang_algo="diharmonic"
867            echo "di harmonics"
868        elif test "$triang_signed" = "5"; then
869            config_signed_triang_algo="intmathabs"
870            echo "integer math using abs()"
871        else
872            echo "Benchmark of signed triangular wave algorithms failed!"
873            echo "Maybe you are doing cross compilation? In that case you have to select"
874            echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
875            echo "Call './configure --help' for further information or read configure.in."
876            exit -1;
877        fi
878    else
879        case "$config_signed_triang_algo" in
880            intmath)
881                triang_signed=2 ;;
882            diharmonic)
883                triang_signed=3 ;;
884            intmathabs)
885                triang_signed=5 ;;
886        esac
887    fi
888    AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
889    
890    if test "$config_unsigned_triang_algo" = "benchmark"; then
891        echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
892        AC_LANG_CPLUSPLUS
893        AC_TRY_RUN([
894                #define SIGNED 0
895                #define SILENT 1
896                #include "${srcdir}/benchmarks/triang.cpp"
897            ],
898            triang_unsigned=0,
899            triang_unsigned=$?,
900            triang_unsigned=0
901        )
902        if test "$triang_unsigned" = "2"; then
903            config_unsigned_triang_algo="intmath"
904            echo "integer math"
905        elif test "$triang_unsigned" = "3"; then
906            config_unsigned_triang_algo="diharmonic"
907            echo "di harmonics"
908        elif test "$triang_unsigned" = "5"; then
909            config_unsigned_triang_algo="intmathabs"
910            echo "integer math using abs()"
911        else
912            echo "Benchmark of unsigned triangular wave algorithms failed!"
913            echo "Maybe you are doing cross compilation? In that case you have to select"
914            echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
915            echo "Call './configure --help' for further information or read configure.in."
916            exit -1;
917        fi
918    else
919        case "$config_unsigned_triang_algo" in
920            intmath)
921                triang_unsigned=2 ;;
922            diharmonic)
923                triang_unsigned=3 ;;
924            intmathabs)
925                triang_unsigned=5 ;;
926        esac
927    fi
928    AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
929    
930  AC_LANG_RESTORE  AC_LANG_RESTORE
 echo "$alsa_major.$alsa_minor.$alsa_subminor";  
 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])  
 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])  
 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])  
931    
932    
933    ###########################################################################
934    # Create Build Files
935    
936  AM_CONFIG_HEADER(config.h)  AM_CONFIG_HEADER(config.h)
937  AM_INIT_AUTOMAKE(linuxsampler, 0.1)  AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
938    
939  AC_LANG_CPLUSPLUS  AC_LANG_CPLUSPLUS
940  AC_PROG_CXX  AC_PROG_CXX
 AM_PROG_LIBTOOL  
941    
942  AC_OUTPUT(Makefile src/Makefile)  # some gcc 4.0 versions need -msse for SSE register allocations
943    if test "$config_asm" = "yes"; then
944      if test "$def_arch_x86" = 1; then
945        CXXFLAGS="$CXXFLAGS -msse"
946      fi
947    fi
948    
949    # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
950    # this, the dlfcn.h check in am_prog_libtool may fail.
951    AC_CHECK_HEADER(stdlib.h)
952    
953    AC_OUTPUT( \
954        Makefile \
955        man/Makefile \
956        man/linuxsampler.1 \
957        src/Makefile \
958        src/db/Makefile \
959        src/network/Makefile \
960        src/engines/Makefile \
961        src/engines/gig/Makefile \
962        src/engines/common/Makefile \
963        src/common/Makefile src/lib/Makefile \
964        src/lib/fileloader/Makefile \
965        src/lib/fileloader/libgig/Makefile \
966        src/testcases/Makefile \
967        src/drivers/Makefile \
968        src/drivers/audio/Makefile \
969        src/drivers/midi/Makefile \
970        linuxsampler.spec \
971        debian/Makefile \
972        Artwork/Makefile \
973        scripts/Makefile \
974        osx/Makefile \
975        osx/linuxsampler.xcodeproj/Makefile \
976        Documentation/Makefile \
977        Documentation/Engines/Makefile \
978        Documentation/Engines/gig/Makefile \
979        linuxsampler.pc \
980        Doxyfile \
981    )
982    
983    # resolve all nested variables in '${config_plugin_dir}'
984    # (merely for providing a human readable summary below)
985    while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
986            config_plugin_dir=`eval echo ${config_plugin_dir}`
987    done
988    
989    
990    ###########################################################################
991    # Output All Configuration Options
992    
993    echo ""
994    echo "#####################################################################"
995    echo "# LinuxSampler Configuration                                        #"
996    echo "#-------------------------------------------------------------------#"
997    echo "# Assembly Optimizations: ${config_asm}"
998    echo "# Development Mode: ${config_dev_mode}"
999    echo "# Debug Level: ${config_debug_level}"
1000    echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1001    echo "# Preload Samples: ${config_preload_samples}"
1002    echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1003    echo "# Maximum Events: ${config_max_events}"
1004    echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1005    echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1006    echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1007    echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1008    echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1009    echo "# Stream Size: ${config_stream_size}"
1010    echo "# Maximum Disk Streams: ${config_max_streams}"
1011    echo "# Maximum Voices: ${config_max_voices}"
1012    echo "# Default Subfragment Size: ${config_subfragment_size}"
1013    echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1014    echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1015    echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1016    echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1017    echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1018    echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1019    echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1020    echo "# Default Portamento Time: ${config_portamento_time_default} s"
1021    echo "# Force Filter Usage: ${config_force_filter}"
1022    echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1023    echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1024    echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1025    echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1026    echo "# Override Filter Type: ${config_override_filter_type}"
1027    echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1028    echo "# Process Muted Channels: ${config_process_muted_channels}"
1029    echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1030    echo "# Interpolate Volume: ${config_interpolate_volume}"
1031    echo "# Instruments database support: ${instruments_db_support}"
1032    echo "# Plugin Path: ${config_plugin_dir}"
1033    echo "#-------------------------------------------------------------------#"
1034    echo "# Read './configure --help' or file 'configure.in' for details.     #"
1035    echo "#####################################################################"
1036    echo ""
1037    echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1038    echo ""

Legend:
Removed from v.18  
changed lines
  Added in v.1259

  ViewVC Help
Powered by ViewVC