--- linuxsampler/trunk/configure.in 2008/01/12 14:13:46 1639 +++ linuxsampler/trunk/configure.ac 2013/05/03 14:26:32 2448 @@ -1,11 +1,13 @@ -AC_INIT(configure.in) - #------------------------------------------------------------------------------------ # LinuxSampler's / liblinuxsampler's "official" release version: -LINUXSAMPLER_RELEASE_MAJOR=0 -LINUXSAMPLER_RELEASE_MINOR=5 -LINUXSAMPLER_RELEASE_BUILD=1 +m4_define(linuxsampler_release_major, 1) +m4_define(linuxsampler_release_minor, 0) +m4_define(linuxsampler_release_build, 0.svn21) + + +AC_INIT([linuxsampler],[linuxsampler_release_major.linuxsampler_release_minor.linuxsampler_release_build]) +AC_CONFIG_SRCDIR([configure.ac]) #------------------------------------------------------------------------------------ # The following is the libtool / shared library version. This doesn't have to @@ -24,43 +26,44 @@ # 6. If any interfaces have been removed since the last public release, then set age # to 0. -LIBLINUXSAMPLER_LT_CURRENT=2 +LIBLINUXSAMPLER_LT_CURRENT=3 LIBLINUXSAMPLER_LT_REVISION=0 -LIBLINUXSAMPLER_LT_AGE=1 +LIBLINUXSAMPLER_LT_AGE=0 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE" #------------------------------------------------------------------------------------ # the LSCP specification version this LinuSampler release complies with: LSCP_RELEASE_MAJOR=1 -LSCP_RELEASE_MINOR=3 +LSCP_RELEASE_MINOR=5 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.]) AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.]) -AM_PROG_LIBTOOL +AC_PROG_CXX +AC_LIBTOOL_WIN32_DLL +AC_PROG_LIBTOOL AC_SUBST(SHLIB_VERSION_ARG) AC_SUBST(SHARED_VERSION_INFO) -AC_C_BIGENDIAN -AC_CANONICAL_SYSTEM +module=yes eval LIB_EXT=$shrext_cmds +AC_SUBST(LIB_EXT) -AC_SUBST(target) -AC_SUBST(target_alias) -AC_SUBST(target_cpu) -AC_SUBST(target_os) -AC_SUBST(target_vendor) +AC_C_BIGENDIAN +AC_CANONICAL_HOST PKG_PROG_PKG_CONFIG ########################################################################### # General Checks +AM_CONDITIONAL(CROSS_COMPILING, test $cross_compiling = yes) + AC_MSG_CHECKING([whether x86 architecture]) def_arch_x86=0 -case $target_cpu in - "i386" | "i486" | "i586" | "i686" | "i786") +case $host_cpu in + "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64") echo "yes" def_arch_x86=1;; *) @@ -72,26 +75,39 @@ # (only if the user did not provide one) CXX_CPU_SWITCH= if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then - if test "$def_arch_x86" = 1; then - CXX_CPU_SWITCH="-march=$target_cpu" + if test "$def_arch_x86" = 1 -a "$host_cpu" != "x86_64"; then + CXX_CPU_SWITCH="-march=$host_cpu" elif test "$target_cpu" = "ppc"; then - CXX_CPU_SWITCH="-arch=$target_cpu" + CXX_CPU_SWITCH="-arch=$host_cpu" fi fi AC_SUBST([CXX_CPU_SWITCH]) +mac=no +linux=no +case "$host" in + *-*-darwin*) + mac=yes + ;; + *-*-linux*) + linux=yes + ;; +esac +AM_CONDITIONAL(LINUX, test "$linux" = yes) +AM_CONDITIONAL(MAC, test "$mac" = yes) + # check if we're on MS Windows AC_CHECK_HEADERS( mmsystem.h, have_windows=1, - have_windows=0 + have_windows=0, + [#include ] ) AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1") AC_MSG_CHECKING([whether UNIX98 compatible]) -AC_LANG_SAVE -AC_LANG_C -AC_TRY_RUN([ +AC_LANG_PUSH([C]) +AC_RUN_IFELSE([AC_LANG_SOURCE([[ #ifndef _GNU_SOURCE #define _GNU_SOURCE 1 #endif @@ -103,18 +119,18 @@ exit(-1); /* not UNIX98 compatible */ #endif } -], +]])], have_unix98="yes", have_unix98="no", have_unix98="no" ) -AC_LANG_RESTORE +AC_LANG_POP([C]) AC_MSG_RESULT([$have_unix98]) -if test "$have_unix98" = "no" -a "have_windows" = "0"; then +if test "$have_unix98" = "no" -a "$have_windows" = "0" -a "$mac" = "no" ; then if test "x$HAVE_UNIX98" = "x"; then echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for" - echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run - echo "./configure with environment variable HAVE_UNIX98=1 in case you think you + echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run" + echo "./configure with environment variable HAVE_UNIX98=1 in case you think you" echo "have a UNIX98 compatible system." exit -1; fi @@ -161,6 +177,11 @@ echo "NPTL glibc bug check disabled" fi +# FIXME: this is actually a dependency of libgig, not of LS directly, why +# isn't it hidden by libgig? +AC_CHECK_HEADERS(uuid/uuid.h) +AC_SEARCH_LIBS(uuid_generate, uuid) + ########################################################################### @@ -195,9 +216,8 @@ fi echo -n "checking Alsa version... " - AC_LANG_SAVE - AC_LANG_C - AC_TRY_RUN([ + AC_LANG_PUSH([C]) + AC_RUN_IFELSE([AC_LANG_SOURCE([[ #include void main(void) { /* ensure backward compatibility */ @@ -206,12 +226,12 @@ #endif exit(SND_LIB_MAJOR); } - ], + ]])], alsa_major=0, alsa_major=$?, alsa_major=0 ) - AC_TRY_RUN([ + AC_RUN_IFELSE([AC_LANG_SOURCE([[ #include void main(void) { /* ensure backward compatibility */ @@ -220,12 +240,12 @@ #endif exit(SND_LIB_MINOR); } - ], + ]])], alsa_minor=0, alsa_minor=$?, alsa_minor=0 ) - AC_TRY_RUN([ + AC_RUN_IFELSE([AC_LANG_SOURCE([[ #include void main(void) { /* ensure backward compatibility */ @@ -234,12 +254,12 @@ #endif exit(SND_LIB_SUBMINOR); } - ], + ]])], alsa_subminor=0, alsa_subminor=$?, alsa_subminor=0 ) - AC_LANG_RESTORE + AC_LANG_POP([C]) echo "$alsa_major.$alsa_minor.$alsa_subminor"; AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.]) AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.]) @@ -249,6 +269,10 @@ fi AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1") AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.]) +config_have_alsa="no" +if test $have_alsa = "1"; then + config_have_alsa="yes" +fi # JACK AC_ARG_ENABLE(jack-driver, @@ -264,7 +288,10 @@ if test $have_jack = "1"; then AC_SUBST(JACK_LIBS) AC_SUBST(JACK_CFLAGS) - AC_CHECK_LIB(jack, jack_client_name_size, [AC_DEFINE(HAVE_JACK_CLIENT_NAME_SIZE, 1, [Define to 1 if you have the `jack_client_name_size' function.])], , $JACK_LIBS) + linuxsampler_save_LIBS=$LIBS + LIBS="$JACK_LIBS $LIBS" + AC_CHECK_FUNCS(jack_client_name_size jack_client_open) + LIBS=$linuxsampler_save_LIBS have_audio_output_driver="true"; fi else @@ -272,6 +299,37 @@ fi AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1") AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.]) +config_have_jack="no" +if test $have_jack = "1"; then + config_have_jack="yes" +fi + +# JACK MIDI +have_jack_midi=0 +if test $have_jack = "1"; then + linuxsampler_save_CFLAGS=$CFLAGS + linuxsampler_save_LIBS=$LIBS + CFLAGS="$JACK_CFLAGS $CFLAGS" + LIBS="$JACK_LIBS $LIBS" + AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0) + if test $have_jack_midi = "1"; then + AC_CHECK_FUNCS(jack_midi_get_event_count) + AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include ]], [[ + jack_midi_clear_buffer(0, 0); + ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1, + [Define to 1 if you have the old jack midi functions that need an nframes argument.])]) + have_midi_input_driver="true" + fi + CFLAGS=$linuxsampler_save_CFLAGS + LIBS=$linuxsampler_save_LIBS +fi +AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1") +AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi, + [Define to 1 if you have JACK with MIDI support installed.]) +config_have_jack_midi="no" +if test $have_jack_midi = "1"; then + config_have_jack_midi="yes" +fi # ARTS AC_ARG_ENABLE(arts-driver, @@ -294,6 +352,10 @@ fi AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1") AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.]) +config_have_arts="no" +if test $have_arts = "1"; then + config_have_arts="yes" +fi # ASIO AUDIO (Win32) AC_ARG_ENABLE(asiosdk-dir, @@ -333,6 +395,10 @@ AC_SUBST(ASIOSDK_BASEDIR) AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1") AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.]) +config_have_asio="no" +if test $have_asio = "1"; then + config_have_asio="yes" +fi # MidiShare (Linux, OS X, Windows) AC_ARG_ENABLE(midishare-driver, @@ -359,6 +425,10 @@ fi AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1") AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.]) +config_have_midishare="no" +if test $have_midishare = "1"; then + config_have_midishare="yes" +fi # CoreMIDI (OS X) AC_ARG_ENABLE(coremidi-driver, @@ -381,6 +451,36 @@ fi AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1") AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.]) +config_have_coremidi="no" +if test $have_coremidi = "1"; then + config_have_coremidi="yes" +fi + +# CoreAudio (OS X) +AC_ARG_ENABLE(coreaudio-driver, + [ --disable-coreaudio-driver + Disable support for the Apple CoreAudio system.], + [config_coreaudio_driver="$enableval"], + [config_coreaudio_driver="yes"] +) +have_coreaudio=0 +if test "$config_coreaudio_driver" = "yes"; then + AC_CHECK_HEADER(CoreAudio/CoreAudio.h, + have_coreaudio=1, + have_coreaudio=0 + ) + if test "$have_coreaudio" = "1"; then + have_audio_output_driver="true" + fi +else + echo "CoreAudio support disabled by configure script parameter" +fi +AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1") +AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.]) +config_have_coreaudio="no" +if test $have_coreaudio = "1"; then + config_have_coreaudio="yes" +fi # MME MIDI (Win32) AC_ARG_ENABLE(mmemidi-driver, @@ -403,19 +503,74 @@ fi AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1") AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.]) +config_have_mme="no" +if test $have_mmemidi = "1"; then + config_have_mme="yes" +fi + +# DSSI +AC_CHECK_HEADERS(dssi.h, + config_have_dssi="yes", + config_have_dssi="no") +AM_CONDITIONAL(HAVE_DSSI, test $config_have_dssi = "yes") + +# LV2 +PKG_CHECK_MODULES(LV2, lv2 >= 1.0.0, config_have_lv2="yes", config_have_lv2="no") +AC_SUBST(LV2_CFLAGS) +AC_SUBST(LV2_LIBS) +AM_CONDITIONAL(HAVE_LV2, test $config_have_lv2 = "yes") + +# VST +AC_ARG_ENABLE(vstsdk-dir, + [ --enable-vstsdk-dir + Directory where the VST SDK is located. + This automatically enables the compilation + of the VST plugin.], + [VSTSDK_DIR="${enableval}"], + [VSTSDK_DIR=] +) +AC_SUBST(VSTSDK_DIR) +AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x") +config_have_vst="no" +if test "x$VSTSDK_DIR" != "x"; then + config_have_vst="yes" +fi + +# AU +AC_CHECK_HEADERS(AudioUnit/AudioUnit.h, + config_have_au="yes", + config_have_au="no") +AM_CONDITIONAL(HAVE_AU, test $config_have_au = "yes") +AM_CONDITIONAL(HAVE_AUFLAGS, test "$AUFLAGS" != "") + +if test $config_have_au = "yes" ; then + if test "x$DEVELOPER_EXTRAS_DIR" = "x" ; then + if test -d /Developer/Extras ; then + DEVELOPER_EXTRAS_DIR=/Developer/Extras + else + DEVELOPER_EXTRAS_DIR=/Developer/Examples + fi + fi + AC_SUBST(DEVELOPER_EXTRAS_DIR) +fi + +if test "x$MAC_PLUGIN_INSTALL_DIR" = "x" ; then + MAC_PLUGIN_INSTALL_DIR=/Library/Audio/Plug-Ins +fi +AC_SUBST(MAC_PLUGIN_INSTALL_DIR) # have we found at least one MIDI input and one audio output driver ? if test "$have_midi_input_driver" = "false"; then echo "No supported MIDI input system found!" echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:" - echo "ALSA, MIDIShare, CoreMIDI." + echo "ALSA, JACK, MIDIShare, CoreMIDI, MME." echo "If you think you have one of those available on your system, make sure you" echo "also have the respective development (header) files installed." exit -1; fi if test "$have_audio_output_driver" = "false"; then echo "No supported audio output system found!" - echo "Sorry, LinuxSampler only supports ALSA, JACK and ARTS as audio output" + echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output" echo "driver at the moment!" exit -1; fi @@ -426,7 +581,7 @@ # Checks for various DLL libraries # Check presence of libgig -libgig_version="3.2.1" +libgig_version="3.3.0" PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false) if test "$HAVE_GIG" = "false"; then echo "Required libgig version not found!" @@ -438,6 +593,53 @@ AC_SUBST(GIG_CFLAGS) AC_SUBST(GIG_LIBS) +# SF2 Engine (requires libgig) +AC_ARG_ENABLE(sf2-engine, + [ --disable-sf2-engine + Disable compilation of the SF2 engine. + You need to have libgig installed.], + [config_sf2_engine="$enableval"], + [config_sf2_engine="yes"] +) +HAVE_SF2=0; +if test "$config_sf2_engine" = "yes"; then + HAVE_SF2=1 +else + echo "SF2 engine disabled by configure script parameter" +fi +AM_CONDITIONAL(HAVE_SF2, test $HAVE_SF2 = 1) +AC_DEFINE_UNQUOTED(HAVE_SF2,$HAVE_SF2,[Define to 1 if you want SF2 engine and have libsf2 installed.]) +config_have_sf2="no" +if test $HAVE_SF2 = "1"; then + config_have_sf2="yes" +fi + +# Check presence of libsndfile +libsndfile_version="1.0" +PKG_CHECK_MODULES(SNDFILE, sndfile >= $libsndfile_version, HAVE_SNDFILE=true, HAVE_SNDFILE=false) +if test "$HAVE_SNDFILE" = "false"; then + echo "Required libsndfile version not found!" + echo "You need to have libsndfile version ${libsndfile_version} installed!" + exit -1; +else + echo "yes, found libsndfile $libsndfile_version" +fi +AC_SUBST(SNDFILE_CFLAGS) +AC_SUBST(SNDFILE_LIBS) + +# Check for Vorbis and FLAC support in libsndfile +linuxsampler_save_CFLAGS=$CFLAGS +CFLAGS="$SNDFILE_CFLAGS $CFLAGS" +AC_CHECK_DECLS([SF_FORMAT_VORBIS, SF_FORMAT_FLAC], [], [], [[#include ]]) + +# Check for loop functionality in libsndfile +AC_CHECK_MEMBERS([SF_INSTRUMENT.loops],, + [AC_MSG_WARN([Your version of libsndfile does not support + reading of loop information. LinuxSampler will not be able to + extract loop information from sample files.])], + [#include ]) +CFLAGS=$linuxsampler_save_CFLAGS + # Instruments DB feature (requires SQLite 3.3) AC_ARG_ENABLE(instruments-db, [ --disable-instruments-db @@ -533,6 +735,18 @@ AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.]) fi +config_pthread_testcancel="$mac" +AC_ARG_ENABLE(pthread-testcancel, + [ --enable-pthread-testcancel + Enable pthread_testcancel() calls and avoid + asynchronous cancel of pthreads (default=yes + for Mac targets, no otherwise).], + [config_pthread_testcancel="$enableval"], + []) +if test "$config_pthread_testcancel" = "yes"; then + AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.]) +fi + AC_ARG_ENABLE(preload-samples, [ --enable-preload-samples Due to seeking and latency issues with hard drives @@ -638,23 +852,25 @@ AC_ARG_ENABLE(max-streams, [ --enable-max-streams - Maximum amount of disk streams (default=90). This - value should always be higher than the maximum - amount of voices.], + Initial maximum amount of disk streams + (default=90). This value can be changed at + runtime. It should always be higher than the + maximum amount of voices.], [config_max_streams="${enableval}"], [config_max_streams="90"] ) -AC_DEFINE_UNQUOTED(CONFIG_MAX_STREAMS, $config_max_streams, [Define max. streams.]) +AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.]) AC_ARG_ENABLE(max-voices, [ --enable-max-voices - Maximum amount of voices (default=64). This value - should always be lower than the maximum amount of - disk streams.], + Initial maximum amount of voices (default=64). + This value can be changed at runtime. It should + always be lower than the maximum amount of disk + streams.], [config_max_voices="${enableval}"], [config_max_voices="64"] ) -AC_DEFINE_UNQUOTED(CONFIG_MAX_VOICES, $config_max_voices, [Define max. voices.]) +AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.]) AC_ARG_ENABLE(subfragment-size, [ --enable-subfragment-size @@ -956,6 +1172,22 @@ AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.]) fi +AC_ARG_ENABLE(master-volume-sysex-by-port, + [ --enable-master-volume-sysex-by-port + Whether global volume sysex message should be + applied globally to the whole sampler or only to + the sampler channels connected to the same MIDI + input port on which the sysex message arrived on. + By default global volume sysex messages apply + globally to the whole sampler, since many MIDI + devices behave that way.], + [config_master_volume_sysex_by_port="$enableval"], + [config_master_volume_sysex_by_port="no"] +) +if test "$config_master_volume_sysex_by_port" = "yes"; then + AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.]) +fi + AC_ARG_ENABLE(plugin-dir, [ --enable-plugin-dir Directory where the sampler shall look for potential plugins, @@ -990,20 +1222,19 @@ ########################################################################### # Automatic Benchmarks (to detect the best algorithms for the system) -AC_LANG_SAVE - if test "$config_signed_triang_algo" = "benchmark"; then echo -n "benchmarking for the best (signed) triangular oscillator algorithm... " - AC_LANG_CPLUSPLUS - AC_TRY_RUN([ + AC_LANG_PUSH([C++]) + AC_RUN_IFELSE([AC_LANG_SOURCE([[ #define SIGNED 1 #define SILENT 1 #include "${srcdir}/benchmarks/triang.cpp" - ], + ]])], triang_signed=0, triang_signed=$?, triang_signed=0 ) + AC_LANG_POP([C++]) if test "$triang_signed" = "2"; then config_signed_triang_algo="intmath" echo "integer math" @@ -1034,16 +1265,17 @@ if test "$config_unsigned_triang_algo" = "benchmark"; then echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... " - AC_LANG_CPLUSPLUS - AC_TRY_RUN([ + AC_LANG_PUSH([C++]) + AC_RUN_IFELSE([AC_LANG_SOURCE([[ #define SIGNED 0 #define SILENT 1 #include "${srcdir}/benchmarks/triang.cpp" - ], + ]])], triang_unsigned=0, triang_unsigned=$?, triang_unsigned=0 ) + AC_LANG_POP([C++]) if test "$triang_unsigned" = "2"; then config_unsigned_triang_algo="intmath" echo "integer math" @@ -1072,30 +1304,20 @@ fi AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.]) -AC_LANG_RESTORE - ########################################################################### # Create Build Files -AM_CONFIG_HEADER(config.h) -AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD") +AC_CONFIG_HEADERS([config.h]) +AM_INIT_AUTOMAKE -AC_LANG_CPLUSPLUS -AC_PROG_CXX - -# some gcc 4.0 versions need -msse for SSE register allocations -if test "$config_asm" = "yes"; then - if test "$def_arch_x86" = 1; then - CXXFLAGS="$CXXFLAGS -msse" - fi -fi +AC_LANG([C++]) # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like # this, the dlfcn.h check in am_prog_libtool may fail. AC_CHECK_HEADER(stdlib.h) -AC_OUTPUT( \ +AC_CONFIG_FILES([\ Makefile \ man/Makefile \ man/linuxsampler.1 \ @@ -1104,13 +1326,22 @@ src/network/Makefile \ src/engines/Makefile \ src/engines/gig/Makefile \ + src/engines/sf2/Makefile \ + src/engines/sfz/Makefile \ src/engines/common/Makefile \ + src/effects/Makefile \ src/common/Makefile \ src/testcases/Makefile \ src/drivers/Makefile \ src/drivers/audio/Makefile \ src/drivers/midi/Makefile \ src/plugins/Makefile \ + src/hostplugins/Makefile \ + src/hostplugins/dssi/Makefile \ + src/hostplugins/lv2/Makefile \ + src/hostplugins/lv2/manifest.ttl \ + src/hostplugins/vst/Makefile \ + src/hostplugins/au/Makefile \ linuxsampler.spec \ debian/Makefile \ Artwork/Makefile \ @@ -1122,7 +1353,8 @@ Documentation/Engines/gig/Makefile \ linuxsampler.pc \ Doxyfile \ -) +]) +AC_OUTPUT # resolve all nested variables in '${config_plugin_dir}' # (merely for providing a human readable summary below) @@ -1138,6 +1370,9 @@ echo "#####################################################################" echo "# LinuxSampler Configuration #" echo "#-------------------------------------------------------------------#" +echo "# Release Version: ${VERSION}" +echo "# LSCP Version: ${LSCP_RELEASE_MAJOR}.${LSCP_RELEASE_MINOR}" +echo "#-------------------------------------------------------------------" echo "# Assembly Optimizations: ${config_asm}" echo "# Development Mode: ${config_dev_mode}" echo "# Debug Level: ${config_debug_level}" @@ -1151,8 +1386,8 @@ echo "# Minimum Stream Refill Size: ${config_stream_min_refill}" echo "# Maximum Stream Refill Size: ${config_stream_max_refill}" echo "# Stream Size: ${config_stream_size}" -echo "# Maximum Disk Streams: ${config_max_streams}" -echo "# Maximum Voices: ${config_max_voices}" +echo "# Default Maximum Disk Streams: ${config_max_streams}" +echo "# Default Maximum Voices: ${config_max_voices}" echo "# Default Subfragment Size: ${config_subfragment_size}" echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}" echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}" @@ -1171,12 +1406,28 @@ echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}" echo "# Process Muted Channels: ${config_process_muted_channels}" echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}" +echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}" echo "# Interpolate Volume: ${config_interpolate_volume}" echo "# Instruments database support: ${config_instruments_db}" if test "$config_instruments_db" = "yes"; then echo "# Instruments DB default location: ${config_default_instruments_db_file}" fi echo "# Plugin Path: ${config_plugin_dir}" +echo "#-------------------------------------------------------------------" +echo "# MIDI Input Drivers:" +echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack_midi}, CoreMIDI: ${config_have_coremidi}, MME: ${config_have_mme}, MidiShare: ${config_have_midishare}" +echo "#-------------------------------------------------------------------" +echo "# Audio Output Drivers:" +echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack}, ARTS: ${config_have_arts}, CoreAudio: ${config_have_coreaudio}, ASIO: ${config_have_asio}" +echo "#-------------------------------------------------------------------" +echo "# Sampler Engines:" +echo "# GIG: yes, SF2: ${config_have_sf2}, SFZ: yes" +echo "#-------------------------------------------------------------------" +echo "# Effect plugin systems for internal effects:" +echo "# LADSPA: yes" +echo "#-------------------------------------------------------------------" +echo "# Building sampler as plugin for following host standards:" +echo "# DSSI: ${config_have_dssi}, LV2: ${config_have_lv2}, VST: ${config_have_vst}, AU: ${config_have_au}" echo "#-------------------------------------------------------------------#" echo "# Read './configure --help' or file 'configure.in' for details. #" echo "#####################################################################"