/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Contents of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1040 - (show annotations) (download)
Wed Feb 7 15:41:31 2007 UTC (11 years, 11 months ago) by schoenebeck
Original Path: linuxsampler/trunk/configure.in
File size: 41244 byte(s)
* bugfix: sampler crashed when trying to persistently map a not existent or
  corrupt .gig file ("MAP MIDI_INSTRUMENT ... PERSISTENT")
* behavior fix: reset FX send levels i.e. when receiving a MIDI "reset all
  controllers" message
* bumped version to 0.4.0.3cvs

1 AC_INIT(configure.in)
2
3 #------------------------------------------------------------------------------------
4 # LinuxSampler's / liblinuxsampler's "official" release version:
5
6 LINUXSAMPLER_RELEASE_MAJOR=0
7 LINUXSAMPLER_RELEASE_MINOR=4
8 LINUXSAMPLER_RELEASE_BUILD=0.3cvs
9
10 #------------------------------------------------------------------------------------
11 # The following is the libtool / shared library version. This doesn't have to
12 # do anything with the release version. It MUST conform to the following rules:
13 #
14 # 1. Start with version information of `0:0:0' for each libtool library.
15 # 2. Update the version information only immediately before a public release of
16 # your software. More frequent updates are unnecessary, and only guarantee
17 # that the current interface number gets larger faster.
18 # 3. If the library source code has changed at all since the last update, then
19 # increment revision (`c:r:a' becomes `c:r+1:a').
20 # 4. If any interfaces have been added, removed, or changed since the last update,
21 # increment current, and set revision to 0.
22 # 5. If any interfaces have been added since the last public release, then increment
23 # age.
24 # 6. If any interfaces have been removed since the last public release, then set age
25 # to 0.
26
27 LIBLINUXSAMPLER_LT_CURRENT=0
28 LIBLINUXSAMPLER_LT_REVISION=0
29 LIBLINUXSAMPLER_LT_AGE=0
30 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31
32 #------------------------------------------------------------------------------------
33 # the LSCP specification version this LinuSampler release complies with:
34
35 LSCP_RELEASE_MAJOR=1
36 LSCP_RELEASE_MINOR=2
37
38 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40
41 AM_PROG_LIBTOOL
42
43 AC_SUBST(SHLIB_VERSION_ARG)
44 AC_SUBST(SHARED_VERSION_INFO)
45
46 AC_C_BIGENDIAN
47 AC_CANONICAL_SYSTEM
48
49 AC_SUBST(target)
50 AC_SUBST(target_alias)
51 AC_SUBST(target_cpu)
52 AC_SUBST(target_os)
53 AC_SUBST(target_vendor)
54
55
56 ###########################################################################
57 # General Checks
58
59 AC_MSG_CHECKING([whether x86 architecture])
60 def_arch_x86=0
61 case $target_cpu in
62 "i386" | "i486" | "i586" | "i686" | "i786")
63 echo "yes"
64 def_arch_x86=1;;
65 *)
66 echo "no";;
67 esac
68 AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
69
70 # determine the right gcc switch for CPU specific optimizations
71 # (only if the user did not provide one)
72 CXX_CPU_SWITCH=
73 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
74 if test "$def_arch_x86" = 1; then
75 CXX_CPU_SWITCH="-march=$target_cpu"
76 elif test "$target_cpu" = "ppc"; then
77 CXX_CPU_SWITCH="-arch=$target_cpu"
78 fi
79 fi
80 AC_SUBST([CXX_CPU_SWITCH])
81
82 AC_MSG_CHECKING([whether UNIX98 compatible])
83 AC_LANG_SAVE
84 AC_LANG_C
85 AC_TRY_RUN([
86 #ifndef _GNU_SOURCE
87 #define _GNU_SOURCE 1
88 #endif
89 #include <features.h>
90 void main(void) {
91 #if _XOPEN_SOURCE >= 500
92 exit(0); /* UNIX98 compatible */
93 #else
94 exit(-1); /* not UNIX98 compatible */
95 #endif
96 }
97 ],
98 have_unix98="yes",
99 have_unix98="no",
100 have_unix98="no"
101 )
102 AC_LANG_RESTORE
103 AC_MSG_RESULT([$have_unix98])
104 if test "$have_unix98" = "no"; then
105 if test "x$HAVE_UNIX98" = "x"; then
106 echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
107 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
108 echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
109 echo "have a UNIX98 compatible system."
110 exit -1;
111 fi
112 fi
113
114 # check for <features.h>
115 AC_CHECK_HEADERS(features.h)
116
117
118 ###########################################################################
119 # Checks for available audio and MIDI systems / drivers
120 # (we throw an error if there's not at least one system for audio output and MIDI input available)
121
122 have_midi_input_driver="false"
123 have_audio_output_driver="false"
124
125 # ALSA
126 AC_ARG_ENABLE(alsa-driver,
127 [ --disable-alsa-driver
128 Disable support for the Advanced Linux Sound
129 Architecture (ALSA).],
130 [config_alsa_driver="no"],
131 [config_alsa_driver="yes"]
132 )
133 have_alsa=0
134 if test "$config_alsa_driver" = "yes"; then
135 AC_CHECK_HEADER(alsa/asoundlib.h,
136 AC_CHECK_LIB(asound, main,
137 have_alsa=1
138 ,
139 have_alsa=0
140 )
141 ,
142 have_alsa=0
143 )
144 if test "$have_alsa" = "1"; then
145 have_midi_input_driver="true"
146 have_audio_output_driver="true";
147 fi
148
149 echo -n "checking Alsa version... "
150 AC_LANG_SAVE
151 AC_LANG_C
152 AC_TRY_RUN([
153 #include <alsa/asoundlib.h>
154 void main(void) {
155 /* ensure backward compatibility */
156 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
157 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
158 #endif
159 exit(SND_LIB_MAJOR);
160 }
161 ],
162 alsa_major=0,
163 alsa_major=$?,
164 alsa_major=0
165 )
166 AC_TRY_RUN([
167 #include <alsa/asoundlib.h>
168 void main(void) {
169 /* ensure backward compatibility */
170 #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
171 #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
172 #endif
173 exit(SND_LIB_MINOR);
174 }
175 ],
176 alsa_minor=0,
177 alsa_minor=$?,
178 alsa_minor=0
179 )
180 AC_TRY_RUN([
181 #include <alsa/asoundlib.h>
182 void main(void) {
183 /* ensure backward compatibility */
184 #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
185 #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
186 #endif
187 exit(SND_LIB_SUBMINOR);
188 }
189 ],
190 alsa_subminor=0,
191 alsa_subminor=$?,
192 alsa_subminor=0
193 )
194 AC_LANG_RESTORE
195 echo "$alsa_major.$alsa_minor.$alsa_subminor";
196 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
197 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
198 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
199 else
200 echo "ALSA support disabled by configure script parameter"
201 fi
202 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
203 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
204
205 # JACK
206 AC_ARG_ENABLE(jack-driver,
207 [ --disable-jack-driver
208 Disable support for the Jack Audio Connection Kit
209 (JACK).],
210 [config_jack_driver="no"],
211 [config_jack_driver="yes"]
212 )
213 have_jack=0
214 if test "$config_jack_driver" = "yes"; then
215 PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
216 if test $have_jack = "1"; then
217 AC_SUBST(JACK_LIBS)
218 AC_SUBST(JACK_CFLAGS)
219 AC_CHECK_LIB(jack, jack_client_name_size, [AC_DEFINE(HAVE_JACK_CLIENT_NAME_SIZE, 1, [Define to 1 if you have the `jack_client_name_size' function.])], , $JACK_LIBS)
220 have_audio_output_driver="true";
221 fi
222 else
223 echo "JACK support disabled by configure script parameter"
224 fi
225 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
226 AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
227
228 # ARTS
229 AC_ARG_ENABLE(arts-driver,
230 [ --disable-arts-driver
231 Disable support for the Analogue Realtime System
232 (aRts).],
233 [config_arts_driver="no"],
234 [config_arts_driver="yes"]
235 )
236 have_arts=0
237 if test "$config_arts_driver" = "yes"; then
238 m4_ifdef([m4_include(m4/arts.m4)],,
239 [sinclude([m4/arts.m4])])
240 AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
241 if test "$have_arts" = "1"; then
242 have_audio_output_driver="true"
243 fi
244 else
245 echo "ARTS support disabled by configure script parameter"
246 fi
247 AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
248 AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
249
250 # MidiShare (Linux, OS X, Windows)
251 AC_ARG_ENABLE(midishare-driver,
252 [ --disable-midishare-driver
253 Disable support for the MidiShare system.],
254 [config_midishare_driver="no"],
255 [config_midishare_driver="yes"]
256 )
257 have_midishare=0
258 if test "$config_midishare_driver" = "yes"; then
259 AC_CHECK_HEADER(MidiShare.h,
260 AC_CHECK_LIB(MidiShare, MidiCountEvs,
261 have_midishare=1,
262 have_midishare=0
263 )
264 ,
265 have_midishare=0
266 )
267 if test "$have_midishare" = "1"; then
268 have_midi_input_driver="true"
269 fi
270 else
271 echo "MidiShare support disabled by configure script parameter"
272 fi
273 AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
274 AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
275
276 # CoreMIDI (OS X)
277 AC_ARG_ENABLE(coremidi-driver,
278 [ --disable-coremidi-driver
279 Disable support for the Apple CoreMIDI system.],
280 [config_coremidi_driver="no"],
281 [config_coremidi_driver="yes"]
282 )
283 have_coremidi=0
284 if test "$config_coremidi_driver" = "yes"; then
285 AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
286 have_coremidi=1,
287 have_coremidi=0
288 )
289 if test "$have_coremidi" = "1"; then
290 have_midi_input_driver="true"
291 fi
292 else
293 echo "CoreMIDI support disabled by configure script parameter"
294 fi
295 AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
296 AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
297
298 # Check presence of libgig
299 libgig_version="3.1.0"
300 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
301 if test "$HAVE_GIG" = "false"; then
302 echo "Required libgig version not found!"
303 echo "You need to have libgig version ${libgig_version} installed!"
304 exit -1;
305 else
306 echo "yes, found libgig $libgig_version"
307 fi
308 AC_SUBST(GIG_CFLAGS)
309 AC_SUBST(GIG_LIBS)
310
311 # SQLITE3
312 PKG_CHECK_MODULES(SQLITE3, sqlite3, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
313 AC_SUBST(SQLITE3_LIBS)
314 AC_SUBST(SQLITE3_CFLAGS)
315 if test $HAVE_SQLITE3 = false; then
316 HAVE_SQLITE3=0;
317 echo "no, support for instrument DB will be disabled!"
318 else
319 HAVE_SQLITE3=1
320 echo "yes"
321 fi
322 AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
323 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you have SQLITE3 installed.])
324
325 if test "$have_midi_input_driver" = "false"; then
326 echo "No supported MIDI input system found!"
327 echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
328 echo "ALSA, MIDIShare, CoreMIDI."
329 echo "If you think you have one of those available on your system, make sure you"
330 echo "also have the respective development (header) files installed."
331 exit -1;
332 fi
333 if test "$have_audio_output_driver" = "false"; then
334 echo "No supported audio output system found!"
335 echo "Sorry, LinuxSampler only supports ALSA and JACK as audio output driver at the moment!"
336 exit -1;
337 fi
338
339
340 ###########################################################################
341 # Handle Configuration Options
342
343 # TODO: should we use AC_ARG_VAR(variable, description) instead?
344
345 AC_ARG_ENABLE(asm,
346 [ --enable-asm
347 Enable hand-crafted assembly optimizations
348 (default=off). LinuxSampler provides CPU specific
349 assembly optimizations for the most important
350 synthesis algorithms. This is currently disabled
351 by default since current asm code is broken.],
352 [config_asm="yes"],
353 [config_asm="no"]
354 )
355 if test "$config_asm" = "yes"; then
356 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable hand-crafted asm optimizations.])
357 fi
358
359 AC_ARG_ENABLE(dev-mode,
360 [ --disable-dev-mode
361 Disable development mode (default=on). In that mode
362 we do some extra sanity checks here and there.
363 This helps to spot possible problems, but reduces
364 efficiency a bit],
365 [config_dev_mode="no"],
366 [config_dev_mode="yes"]
367 )
368 if test "$config_dev_mode" = "yes"; then
369 AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
370 fi
371
372 AC_ARG_ENABLE(debug-level,
373 [ --enable-debug-level
374 Specify verbosity of console messages (default=1).
375 The higher the value, the higher will be verbosity.
376 A value of 0 means no console output at all.
377 There's not really an upper limit but the usual
378 level of all messages is currently somewhere less
379 than 10.],
380 [config_debug_level="${enableval}"],
381 [config_debug_level="1"]
382 )
383 AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
384
385 AC_ARG_ENABLE(rt-exceptions,
386 [ --enable-rt-exceptions
387 Enable exceptions in the realtime thread
388 (default=no). If this is enabled, exceptions will
389 be thrown on critical errors in the realtime
390 context as well. Otherwise if disabled
391 segmentation faults will be forced by the
392 application on critical errors.],
393 [config_rt_exceptions="yes"],
394 [config_rt_exceptions="no"]
395 )
396 if test "$config_rt_exceptions" = "yes"; then
397 AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
398 fi
399
400 AC_ARG_ENABLE(preload-samples,
401 [ --enable-preload-samples
402 Due to seeking and latency issues with hard drives
403 we have to cache a small part of samples' head in
404 RAM (default=32768). The higher this value the
405 more memory will be occupied for each sample, but
406 the safer this will be in regards of possible
407 droputs. A 'good' value depends on the running
408 system and usage dependant factors.],
409 [config_preload_samples="${enableval}"],
410 [config_preload_samples="32768"]
411 )
412 AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
413
414 AC_ARG_ENABLE(max-pitch,
415 [ --enable-max-pitch
416 Specify the maximum allowed pitch value in octaves
417 (default=4). To lower memory usage you might want
418 set a smaller value.],
419 [config_max_pitch="${enableval}"],
420 [config_max_pitch="4"]
421 )
422 AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
423
424 AC_ARG_ENABLE(max-events,
425 [ --enable-max-events
426 Specify the maximum allowed amount of events to be
427 processed per fragment (default=1024).],
428 [config_max_events="${enableval}"],
429 [config_max_events="1024"]
430 )
431 AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
432
433 AC_ARG_ENABLE(eg-bottom,
434 [ --enable-eg-bottom
435 Bottom limit of envelope generators
436 (default=0.001). Certain kinds of curve types like
437 exponential curves converge against 0 but never
438 reach 0. So we have to define a certain low value
439 after which we should consider all smaller values
440 to be 'almost zero'. The smaller this value, the
441 longer will voices survive in EG's release stage
442 and thus waste voices. If this value is too high
443 will cause click sounds though.],
444 [config_eg_bottom="${enableval}"],
445 [config_eg_bottom="0.001"]
446 )
447 AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
448
449 AC_ARG_ENABLE(eg-min-release-time,
450 [ --enable-eg-min-release-time
451 Specify the lowest allowed release time in seconds
452 (default=0.0025). This value will also be used to
453 ramp down voices on voice stealing. This value
454 should always be less than the period time of the
455 used audio driver, as in case of voice stealing
456 the killed voice needs to be completely ramped
457 down in the same fragment.],
458 [config_eg_min_release_time="${enableval}"],
459 [config_eg_min_release_time="0.0025"]
460 )
461 AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
462
463 AC_ARG_ENABLE(refill-streams,
464 [ --enable-refill-streams
465 Number of streams that should be refilled in each
466 disk thread cycle (default=4).],
467 [config_refill_streams="${enableval}"],
468 [config_refill_streams="4"]
469 )
470 AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
471
472 AC_ARG_ENABLE(stream-min-refill,
473 [ --enable-stream-min-refill
474 Minimum refill size for disk streams (default=1024).
475 The disk thread will go to sleep for a while if no
476 stream had to be refilled more than this value in
477 a disk thread cycle.],
478 [config_stream_min_refill="${enableval}"],
479 [config_stream_min_refill="1024"]
480 )
481 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
482
483 AC_ARG_ENABLE(stream-max-refill,
484 [ --enable-stream-max-refill
485 Maximum refill size for disk streams
486 (default=65536). The disk thread will refill
487 each stream only by a size of this value per
488 disk thread cycle.],
489 [config_stream_max_refill="${enableval}"],
490 [config_stream_max_refill="65536"]
491 )
492 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
493
494 AC_ARG_ENABLE(stream-size,
495 [ --enable-stream-size
496 Size of each stream's ring buffer in sample points
497 (default=262144).],
498 [config_stream_size="${enableval}"],
499 [config_stream_size="262144"]
500 )
501 AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
502
503 AC_ARG_ENABLE(max-streams,
504 [ --enable-max-streams
505 Maximum amount of disk streams (default=90). This
506 value should always be higher than the maximum
507 amount of voices.],
508 [config_max_streams="${enableval}"],
509 [config_max_streams="90"]
510 )
511 AC_DEFINE_UNQUOTED(CONFIG_MAX_STREAMS, $config_max_streams, [Define max. streams.])
512
513 AC_ARG_ENABLE(max-voices,
514 [ --enable-max-voices
515 Maximum amount of voices (default=64). This value
516 should always be lower than the maximum amount of
517 disk streams.],
518 [config_max_voices="${enableval}"],
519 [config_max_voices="64"]
520 )
521 AC_DEFINE_UNQUOTED(CONFIG_MAX_VOICES, $config_max_voices, [Define max. voices.])
522
523 AC_ARG_ENABLE(subfragment-size,
524 [ --enable-subfragment-size
525 Every audio fragment will be splitted into
526 subfragments. Where each subfragment renders
527 audio with constant synthesis parameters. This is
528 done for efficiency reasons. This parameter
529 defines the default size of a subfragment in
530 sample points. A large value means less CPU time
531 whereas a low value means better audio quality
532 (default=32).],
533 [config_subfragment_size="${enableval}"],
534 [config_subfragment_size="32"]
535 )
536 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
537
538 AC_ARG_ENABLE(global-attenuation-default,
539 [ --enable-global-attenuation-default
540 To prevent clipping all samples will be lowered
541 in amplitude by this given default factor (can
542 be overridden at runtime).
543 (default=0.35)],
544 [config_global_attenuation_default="${enableval}"],
545 [config_global_attenuation_default="0.35"]
546 )
547 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
548
549 AC_ARG_ENABLE(voice-steal-algo,
550 [ --enable-voice-steal-algo
551 Voice stealing algorithm to be used. Currently
552 available options:
553 none:
554 Disable voice stealing completely.
555 oldestvoiceonkey (default):
556 Try to kill a voice on the same key first,
557 if no success, proceed with the oldest key.
558 oldestkey:
559 Try to kill a voice from the oldest active
560 key.],
561 [ if test ! "(" "${enableval}" = "none" \
562 -o "${enableval}" = "oldestvoiceonkey" \
563 -o "${enableval}" = "oldestkey" ")" ; then
564 AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
565 else
566 config_voice_steal_algo="${enableval}"
567 fi
568 ],
569 [config_voice_steal_algo="oldestvoiceonkey"]
570 )
571 AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
572
573 AC_ARG_ENABLE(sysex-buffer-size,
574 [ --enable-sysex-buffer-size
575 System Exclusive Message buffer size in kB
576 (default=2048).],
577 [config_sysex_buffer_size="${enableval}"],
578 [config_sysex_buffer_size="2048"]
579 )
580 AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
581
582 AC_ARG_ENABLE(force-filter,
583 [ --enable-force-filter
584 If enabled will force filter to be used even if
585 no usage was define in instrument patch files.
586 (default=no).],
587 [config_force_filter="yes"],
588 [config_force_filter="no"]
589 )
590 if test "$config_force_filter" = "yes"; then
591 AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
592 fi
593
594 AC_ARG_ENABLE(filter-cutoff-min,
595 [ --enable-filter-cutoff-min
596 Minimum filter cutoff frequency in Hz
597 (default=100.0).],
598 [config_filter_cutoff_min="${enableval}"],
599 [config_filter_cutoff_min="100.0"]
600 )
601 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
602
603 AC_ARG_ENABLE(filter-cutoff-max,
604 [ --enable-filter-cutoff-max
605 Maximum filter cutoff frequency in Hz
606 (default=10000.0).],
607 [config_filter_cutoff_max="${enableval}"],
608 [config_filter_cutoff_max="10000.0"]
609 )
610 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
611
612 AC_ARG_ENABLE(override-cutoff-ctrl,
613 [ --enable-override-cutoff-ctrl
614 Override filter cutoff MIDI controller (default=no).
615 Note: you have to define the MIDI controller number
616 here, it's not a boolean parameter type! If this
617 option is used, controller number given by
618 instrument patch will be ignored and instead this
619 supplied value will be used.],
620 [config_override_cutoff_ctrl="${enableval}"],
621 [config_override_cutoff_ctrl="no"]
622 )
623 if test ! "$config_override_cutoff_ctrl" = "no"; then
624 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
625 fi
626
627 AC_ARG_ENABLE(override-resonance-ctrl,
628 [ --enable-override-resonance-ctrl
629 Override filter resonance MIDI controller
630 (default=no). Note: you have to define the MIDI
631 controller number here, it's not a boolean
632 parameter type! If this option is used, controller
633 number given by instrument patch will be ignored
634 and instead this supplied value will be used.],
635 [config_override_resonance_ctrl="${enableval}"],
636 [config_override_resonance_ctrl="no"]
637 )
638 if test ! "$config_override_resonance_ctrl" = "no"; then
639 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
640 fi
641
642 AC_ARG_ENABLE(override-filter-type,
643 [ --enable-override-filter-type
644 Override filter type (default=no). Options:
645 hp: for highpass
646 bp: for bandpass
647 br: for bandreject
648 lp: for lowpass
649 lpt: for lowpass turbo],
650 [ if test "${enableval}" = "hp" ; then
651 config_override_filter_type="::gig::vcf_type_highpass"
652 elif test "${enableval}" = "bp" ; then
653 config_override_filter_type="::gig::vcf_type_bandpass"
654 elif test "${enableval}" = "br" ; then
655 config_override_filter_type="::gig::vcf_type_bandreject"
656 elif test "${enableval}" = "lp" ; then
657 config_override_filter_type="::gig::vcf_type_lowpass"
658 elif test "${enableval}" = "lpt" ; then
659 config_override_filter_type="::gig::vcf_type_lowpassturbo"
660 elif test ! "${enableval}" = "no"; then
661 AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
662 fi
663 ],
664 [config_override_filter_type="no"]
665 )
666 if test ! "$config_override_filter_type" = "no"; then
667 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
668 fi
669
670 AC_ARG_ENABLE(gs-checksum,
671 [ --enable-gs-checksum
672 Enable Roland General Synth SysEx checksum check
673 (default=no). If this is enabled, all GS SysEx
674 messages which do not provide a correct checksum
675 will be ignored. This is disabled by default as
676 not all devices honor GS checksums.],
677 [config_assert_gs_sysex_checksum="yes"],
678 [config_assert_gs_sysex_checksum="no"]
679 )
680 if test "config_assert_gs_sysex_checksum" = "yes"; then
681 AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
682 fi
683
684 AC_ARG_ENABLE(portamento-time-min,
685 [ --enable-portamento-time-min
686 Minimum Portamento time in seconds
687 (default=0.1).],
688 [config_portamento_time_min="${enableval}"],
689 [config_portamento_time_min="0.1"]
690 )
691 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
692
693 AC_ARG_ENABLE(portamento-time-max,
694 [ --enable-portamento-time-max
695 Maximum Portamento time in seconds
696 (default=32).],
697 [config_portamento_time_max="${enableval}"],
698 [config_portamento_time_max="32"]
699 )
700 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
701
702 AC_ARG_ENABLE(portamento-time-default,
703 [ --enable-portamento-time-default
704 Default Portamento time in seconds
705 (default=1).],
706 [config_portamento_time_default="${enableval}"],
707 [config_portamento_time_default="1"]
708 )
709 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
710
711 AC_ARG_ENABLE(signed-triang-algo,
712 [ --enable-signed-triang-algo
713 Signed triangular wave algorithm to be used (e.g. for LFOs).
714 Currently available options:
715 intmath:
716 Uses integer math without any branch will then be
717 converted to floating point value for each sample point.
718 This int->float conversion might hurt on some systems.
719 intmathabs:
720 Similar to intmath but uses abs() function.
721 Depending on compiler and platrofm this could
722 perform better than integer math as it avoids
723 an extra integer multiply instruction.
724
725 diharmonic:
726 The triangular wave will be approximated by adding two
727 sinusoidials. This solution might especially hurt on
728 systems with weak floating point unit.
729 benchmark (default):
730 This is not an algorithm. Use this option if the
731 appropriate algorithm should be automatically
732 chosen by the configure script by performing a
733 benchmark between the algorithms mentioned above.
734 This will NOT work for cross compilation!],
735 [ if test ! "(" "${enableval}" = "intmath" \
736 -o "${enableval}" = "intmathabs" \
737 -o "${enableval}" = "diharmonic" ")" ; then
738 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
739 else
740 config_signed_triang_algo="${enableval}"
741 fi
742 ],
743 [config_signed_triang_algo="benchmark"]
744 )
745
746 AC_ARG_ENABLE(unsigned-triang-algo,
747 [ --enable-unsigned-triang-algo
748 Unsigned triangular wave algorithm to be used (e.g. for LFOs).
749 Currently available options:
750 intmath:
751 Uses integer math without any branch will then be
752 converted to floating point value for each sample point.
753 This int->float conversion might hurt on some systems.
754 intmathabs:
755 Similar to intmath but uses abs() function.
756 Depending on compiler and platrofm this could
757 perform better than integer math as it avoids
758 an extra integer multiply instruction.
759
760 diharmonic:
761 The triangular wave will be approximated by adding two
762 sinusoidials. This solution might especially hurt on
763 systems with weak floating point unit.
764 benchmark (default):
765 This is not an algorithm. Use this option if the
766 appropriate algorithm should be automatically
767 chosen by the configure script by performing a
768 benchmark between the algorithms mentioned above.
769 This will NOT work for cross compilation!],
770 [ if test ! "(" "${enableval}" = "intmath" \
771 -o "${enableval}" = "intmathabs" \
772 -o "${enableval}" = "diharmonic" ")" ; then
773 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
774 else
775 config_unsigned_triang_algo="${enableval}"
776 fi
777 ],
778 [config_unsigned_triang_algo="benchmark"]
779 )
780
781 AC_ARG_ENABLE(process-muted-channels,
782 [ --enable-process-muted-channels
783 Enable processing of muted channels (default=no).
784 In that mode all MIDI events in the muted channels
785 will be processed. This will provide information
786 about the active voices in the muted channels and
787 will not discard notes, triggered in mute mode,
788 when the channel is unmuted. But also will reduce
789 the efficiency.],
790 [config_process_muted_channels="yes"],
791 [config_process_muted_channels="no"]
792 )
793 if test "$config_process_muted_channels" = "yes"; then
794 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
795 fi
796
797 AC_ARG_ENABLE(process-all-notes-off,
798 [ --disable-process-all-notes-off
799 Disable interpretation of All-Notes-Off MIDI
800 messages (default=on). By default LS will release
801 all voices whenever it receives an All-Notes-Off
802 MIDI message. You can disable this behavior, so
803 that LS simply ignores such messages.],
804 [config_process_all_notes_off="no"],
805 [config_process_all_notes_off="yes"]
806 )
807 if test "$config_process_all_notes_off" = "yes"; then
808 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
809 fi
810
811 AC_ARG_ENABLE(interpolate-volume,
812 [ --disable-interpolate-volume
813 Disable interpolation of volume modulation
814 (default=on). With this enabled, the volume changes
815 generated by for example the envelope generator
816 will be smoother, minimizing the risk for audio
817 clicks. Disable it to reduce CPU usage.],
818 [config_interpolate_volume="no"],
819 [config_interpolate_volume="yes"]
820 )
821 if test "$config_interpolate_volume" = "yes"; then
822 AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
823 fi
824
825
826 ###########################################################################
827 # Automatic Benchmarks (to detect the best algorithms for the system)
828
829 AC_LANG_SAVE
830
831 if test "$config_signed_triang_algo" = "benchmark"; then
832 echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
833 AC_LANG_CPLUSPLUS
834 AC_TRY_RUN([
835 #define SIGNED 1
836 #define SILENT 1
837 #include "${srcdir}/benchmarks/triang.cpp"
838 ],
839 triang_signed=0,
840 triang_signed=$?,
841 triang_signed=0
842 )
843 if test "$triang_signed" = "2"; then
844 config_signed_triang_algo="intmath"
845 echo "integer math"
846 elif test "$triang_signed" = "3"; then
847 config_signed_triang_algo="diharmonic"
848 echo "di harmonics"
849 elif test "$triang_signed" = "5"; then
850 config_signed_triang_algo="intmathabs"
851 echo "integer math using abs()"
852 else
853 echo "Benchmark of signed triangular wave algorithms failed!"
854 echo "Maybe you are doing cross compilation? In that case you have to select"
855 echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
856 echo "Call './configure --help' for further information or read configure.in."
857 exit -1;
858 fi
859 fi
860 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
861
862 if test "$config_unsigned_triang_algo" = "benchmark"; then
863 echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
864 AC_LANG_CPLUSPLUS
865 AC_TRY_RUN([
866 #define SIGNED 0
867 #define SILENT 1
868 #include "${srcdir}/benchmarks/triang.cpp"
869 ],
870 triang_unsigned=0,
871 triang_unsigned=$?,
872 triang_unsigned=0
873 )
874 if test "$triang_unsigned" = "2"; then
875 config_unsigned_triang_algo="intmath"
876 echo "integer math"
877 elif test "$triang_unsigned" = "3"; then
878 config_unsigned_triang_algo="diharmonic"
879 echo "di harmonics"
880 elif test "$triang_unsigned" = "5"; then
881 config_unsigned_triang_algo="intmathabs"
882 echo "integer math using abs()"
883 else
884 echo "Benchmark of unsigned triangular wave algorithms failed!"
885 echo "Maybe you are doing cross compilation? In that case you have to select"
886 echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
887 echo "Call './configure --help' for further information or read configure.in."
888 exit -1;
889 fi
890 fi
891 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
892
893 AC_LANG_RESTORE
894
895
896 ###########################################################################
897 # Create Build Files
898
899 AM_CONFIG_HEADER(config.h)
900 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
901
902 AC_LANG_CPLUSPLUS
903 AC_PROG_CXX
904
905 # some gcc 4.0 versions need -msse for SSE register allocations
906 if test "$config_asm" = "yes"; then
907 if test "$def_arch_x86" = 1; then
908 CXXFLAGS="$CXXFLAGS -msse"
909 fi
910 fi
911
912 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
913 # this, the dlfcn.h check in am_prog_libtool may fail.
914 AC_CHECK_HEADER(stdlib.h)
915
916 AC_OUTPUT( \
917 Makefile \
918 man/Makefile \
919 man/linuxsampler.1 \
920 src/Makefile \
921 src/network/Makefile \
922 src/engines/Makefile \
923 src/engines/gig/Makefile \
924 src/engines/common/Makefile \
925 src/common/Makefile src/lib/Makefile \
926 src/lib/fileloader/Makefile \
927 src/lib/fileloader/libgig/Makefile \
928 src/testcases/Makefile \
929 src/drivers/Makefile \
930 src/drivers/audio/Makefile \
931 src/drivers/midi/Makefile \
932 linuxsampler.spec \
933 debian/Makefile \
934 Artwork/Makefile \
935 scripts/Makefile \
936 osx/Makefile \
937 osx/LinuxSampler.xcode/Makefile \
938 Documentation/Makefile \
939 Documentation/Engines/Makefile \
940 Documentation/Engines/gig/Makefile \
941 linuxsampler.pc \
942 Doxyfile \
943 )
944
945
946 ###########################################################################
947 # Output All Configuration Options
948
949 echo ""
950 echo "#####################################################################"
951 echo "# LinuxSampler Configuration #"
952 echo "#-------------------------------------------------------------------#"
953 echo "# Assembly Optimizations: ${config_asm}"
954 echo "# Development Mode: ${config_dev_mode}"
955 echo "# Debug Level: ${config_debug_level}"
956 echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
957 echo "# Preload Samples: ${config_preload_samples}"
958 echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
959 echo "# Maximum Events: ${config_max_events}"
960 echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
961 echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
962 echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
963 echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
964 echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
965 echo "# Stream Size: ${config_stream_size}"
966 echo "# Maximum Disk Streams: ${config_max_streams}"
967 echo "# Maximum Voices: ${config_max_voices}"
968 echo "# Default Subfragment Size: ${config_subfragment_size}"
969 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
970 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
971 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
972 echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
973 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
974 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
975 echo "# Max. Portamento Time: ${config_portamento_time_max} s"
976 echo "# Default Portamento Time: ${config_portamento_time_default} s"
977 echo "# Force Filter Usage: ${config_force_filter}"
978 echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
979 echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
980 echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
981 echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
982 echo "# Override Filter Type: ${config_override_filter_type}"
983 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
984 echo "# Process Muted Channels: ${config_process_muted_channels}"
985 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
986 echo "# Interpolate Volume: ${config_interpolate_volume}"
987 echo "#-------------------------------------------------------------------#"
988 echo "# Read './configure --help' or file 'configure.in' for details. #"
989 echo "#####################################################################"
990 echo ""
991 echo "Good. Now type 'make' to compile, followed by 'make install' as root."
992 echo ""

  ViewVC Help
Powered by ViewVC