/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Contents of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1161 - (show annotations) (download)
Mon Apr 16 15:51:18 2007 UTC (16 years, 11 months ago) by iliev
Original Path: linuxsampler/trunk/configure.in
File size: 41628 byte(s)
* Implemented instruments database

1 AC_INIT(configure.in)
2
3 #------------------------------------------------------------------------------------
4 # LinuxSampler's / liblinuxsampler's "official" release version:
5
6 LINUXSAMPLER_RELEASE_MAJOR=0
7 LINUXSAMPLER_RELEASE_MINOR=4
8 LINUXSAMPLER_RELEASE_BUILD=0.4cvs
9
10 #------------------------------------------------------------------------------------
11 # The following is the libtool / shared library version. This doesn't have to
12 # do anything with the release version. It MUST conform to the following rules:
13 #
14 # 1. Start with version information of `0:0:0' for each libtool library.
15 # 2. Update the version information only immediately before a public release of
16 # your software. More frequent updates are unnecessary, and only guarantee
17 # that the current interface number gets larger faster.
18 # 3. If the library source code has changed at all since the last update, then
19 # increment revision (`c:r:a' becomes `c:r+1:a').
20 # 4. If any interfaces have been added, removed, or changed since the last update,
21 # increment current, and set revision to 0.
22 # 5. If any interfaces have been added since the last public release, then increment
23 # age.
24 # 6. If any interfaces have been removed since the last public release, then set age
25 # to 0.
26
27 LIBLINUXSAMPLER_LT_CURRENT=0
28 LIBLINUXSAMPLER_LT_REVISION=0
29 LIBLINUXSAMPLER_LT_AGE=0
30 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31
32 #------------------------------------------------------------------------------------
33 # the LSCP specification version this LinuSampler release complies with:
34
35 LSCP_RELEASE_MAJOR=1
36 LSCP_RELEASE_MINOR=2
37
38 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40
41 AM_PROG_LIBTOOL
42
43 AC_SUBST(SHLIB_VERSION_ARG)
44 AC_SUBST(SHARED_VERSION_INFO)
45
46 AC_C_BIGENDIAN
47 AC_CANONICAL_SYSTEM
48
49 AC_SUBST(target)
50 AC_SUBST(target_alias)
51 AC_SUBST(target_cpu)
52 AC_SUBST(target_os)
53 AC_SUBST(target_vendor)
54
55
56 ###########################################################################
57 # General Checks
58
59 AC_MSG_CHECKING([whether x86 architecture])
60 def_arch_x86=0
61 case $target_cpu in
62 "i386" | "i486" | "i586" | "i686" | "i786")
63 echo "yes"
64 def_arch_x86=1;;
65 *)
66 echo "no";;
67 esac
68 AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
69
70 # determine the right gcc switch for CPU specific optimizations
71 # (only if the user did not provide one)
72 CXX_CPU_SWITCH=
73 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
74 if test "$def_arch_x86" = 1; then
75 CXX_CPU_SWITCH="-march=$target_cpu"
76 elif test "$target_cpu" = "ppc"; then
77 CXX_CPU_SWITCH="-arch=$target_cpu"
78 fi
79 fi
80 AC_SUBST([CXX_CPU_SWITCH])
81
82 AC_MSG_CHECKING([whether UNIX98 compatible])
83 AC_LANG_SAVE
84 AC_LANG_C
85 AC_TRY_RUN([
86 #ifndef _GNU_SOURCE
87 #define _GNU_SOURCE 1
88 #endif
89 #include <features.h>
90 void main(void) {
91 #if _XOPEN_SOURCE >= 500
92 exit(0); /* UNIX98 compatible */
93 #else
94 exit(-1); /* not UNIX98 compatible */
95 #endif
96 }
97 ],
98 have_unix98="yes",
99 have_unix98="no",
100 have_unix98="no"
101 )
102 AC_LANG_RESTORE
103 AC_MSG_RESULT([$have_unix98])
104 if test "$have_unix98" = "no"; then
105 if test "x$HAVE_UNIX98" = "x"; then
106 echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
107 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
108 echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
109 echo "have a UNIX98 compatible system."
110 exit -1;
111 fi
112 fi
113
114 # check for <features.h>
115 AC_CHECK_HEADERS(features.h)
116
117
118 ###########################################################################
119 # Checks for available audio and MIDI systems / drivers
120 # (we throw an error if there's not at least one system for audio output and MIDI input available)
121
122 have_midi_input_driver="false"
123 have_audio_output_driver="false"
124
125 # ALSA
126 AC_ARG_ENABLE(alsa-driver,
127 [ --disable-alsa-driver
128 Disable support for the Advanced Linux Sound
129 Architecture (ALSA).],
130 [config_alsa_driver="no"],
131 [config_alsa_driver="yes"]
132 )
133 have_alsa=0
134 if test "$config_alsa_driver" = "yes"; then
135 AC_CHECK_HEADER(alsa/asoundlib.h,
136 AC_CHECK_LIB(asound, main,
137 have_alsa=1
138 ,
139 have_alsa=0
140 )
141 ,
142 have_alsa=0
143 )
144 if test "$have_alsa" = "1"; then
145 have_midi_input_driver="true"
146 have_audio_output_driver="true";
147 fi
148
149 echo -n "checking Alsa version... "
150 AC_LANG_SAVE
151 AC_LANG_C
152 AC_TRY_RUN([
153 #include <alsa/asoundlib.h>
154 void main(void) {
155 /* ensure backward compatibility */
156 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
157 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
158 #endif
159 exit(SND_LIB_MAJOR);
160 }
161 ],
162 alsa_major=0,
163 alsa_major=$?,
164 alsa_major=0
165 )
166 AC_TRY_RUN([
167 #include <alsa/asoundlib.h>
168 void main(void) {
169 /* ensure backward compatibility */
170 #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
171 #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
172 #endif
173 exit(SND_LIB_MINOR);
174 }
175 ],
176 alsa_minor=0,
177 alsa_minor=$?,
178 alsa_minor=0
179 )
180 AC_TRY_RUN([
181 #include <alsa/asoundlib.h>
182 void main(void) {
183 /* ensure backward compatibility */
184 #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
185 #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
186 #endif
187 exit(SND_LIB_SUBMINOR);
188 }
189 ],
190 alsa_subminor=0,
191 alsa_subminor=$?,
192 alsa_subminor=0
193 )
194 AC_LANG_RESTORE
195 echo "$alsa_major.$alsa_minor.$alsa_subminor";
196 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
197 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
198 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
199 else
200 echo "ALSA support disabled by configure script parameter"
201 fi
202 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
203 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
204
205 # JACK
206 AC_ARG_ENABLE(jack-driver,
207 [ --disable-jack-driver
208 Disable support for the Jack Audio Connection Kit
209 (JACK).],
210 [config_jack_driver="no"],
211 [config_jack_driver="yes"]
212 )
213 have_jack=0
214 if test "$config_jack_driver" = "yes"; then
215 PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
216 if test $have_jack = "1"; then
217 AC_SUBST(JACK_LIBS)
218 AC_SUBST(JACK_CFLAGS)
219 AC_CHECK_LIB(jack, jack_client_name_size, [AC_DEFINE(HAVE_JACK_CLIENT_NAME_SIZE, 1, [Define to 1 if you have the `jack_client_name_size' function.])], , $JACK_LIBS)
220 have_audio_output_driver="true";
221 fi
222 else
223 echo "JACK support disabled by configure script parameter"
224 fi
225 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
226 AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
227
228 # ARTS
229 AC_ARG_ENABLE(arts-driver,
230 [ --disable-arts-driver
231 Disable support for the Analogue Realtime System
232 (aRts).],
233 [config_arts_driver="no"],
234 [config_arts_driver="yes"]
235 )
236 have_arts=0
237 if test "$config_arts_driver" = "yes"; then
238 m4_ifdef([m4_include(m4/arts.m4)],,
239 [sinclude([m4/arts.m4])])
240 AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
241 if test "$have_arts" = "1"; then
242 have_audio_output_driver="true"
243 fi
244 else
245 echo "ARTS support disabled by configure script parameter"
246 fi
247 AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
248 AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
249
250 # MidiShare (Linux, OS X, Windows)
251 AC_ARG_ENABLE(midishare-driver,
252 [ --disable-midishare-driver
253 Disable support for the MidiShare system.],
254 [config_midishare_driver="no"],
255 [config_midishare_driver="yes"]
256 )
257 have_midishare=0
258 if test "$config_midishare_driver" = "yes"; then
259 AC_CHECK_HEADER(MidiShare.h,
260 AC_CHECK_LIB(MidiShare, MidiCountEvs,
261 have_midishare=1,
262 have_midishare=0
263 )
264 ,
265 have_midishare=0
266 )
267 if test "$have_midishare" = "1"; then
268 have_midi_input_driver="true"
269 fi
270 else
271 echo "MidiShare support disabled by configure script parameter"
272 fi
273 AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
274 AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
275
276 # CoreMIDI (OS X)
277 AC_ARG_ENABLE(coremidi-driver,
278 [ --disable-coremidi-driver
279 Disable support for the Apple CoreMIDI system.],
280 [config_coremidi_driver="no"],
281 [config_coremidi_driver="yes"]
282 )
283 have_coremidi=0
284 if test "$config_coremidi_driver" = "yes"; then
285 AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
286 have_coremidi=1,
287 have_coremidi=0
288 )
289 if test "$have_coremidi" = "1"; then
290 have_midi_input_driver="true"
291 fi
292 else
293 echo "CoreMIDI support disabled by configure script parameter"
294 fi
295 AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
296 AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
297
298 # Check presence of libgig
299 libgig_version="3.1.1"
300 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
301 if test "$HAVE_GIG" = "false"; then
302 echo "Required libgig version not found!"
303 echo "You need to have libgig version ${libgig_version} installed!"
304 exit -1;
305 else
306 echo "yes, found libgig $libgig_version"
307 fi
308 AC_SUBST(GIG_CFLAGS)
309 AC_SUBST(GIG_LIBS)
310
311 # Check presence of sqlite3
312 sqlite_version="3.3"
313 PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
314 AC_SUBST(SQLITE3_LIBS)
315 AC_SUBST(SQLITE3_CFLAGS)
316 if test $HAVE_SQLITE3 = false; then
317 HAVE_SQLITE3=0;
318 instruments_db_support="no"
319 echo "*** Required sqlite version not found!"
320 echo "*** You need to have sqlite version ${sqlite_version} or higher"
321 echo "*** for instruments database support to be enabled."
322 echo "*** Support for instruments DB will be disabled!"
323 else
324 HAVE_SQLITE3=1
325 instruments_db_support="yes"
326 fi
327 AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
328 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you have SQLITE3 installed.])
329
330 if test "$have_midi_input_driver" = "false"; then
331 echo "No supported MIDI input system found!"
332 echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
333 echo "ALSA, MIDIShare, CoreMIDI."
334 echo "If you think you have one of those available on your system, make sure you"
335 echo "also have the respective development (header) files installed."
336 exit -1;
337 fi
338 if test "$have_audio_output_driver" = "false"; then
339 echo "No supported audio output system found!"
340 echo "Sorry, LinuxSampler only supports ALSA and JACK as audio output driver at the moment!"
341 exit -1;
342 fi
343
344
345 ###########################################################################
346 # Handle Configuration Options
347
348 # TODO: should we use AC_ARG_VAR(variable, description) instead?
349
350 AC_ARG_ENABLE(asm,
351 [ --enable-asm
352 Enable hand-crafted assembly optimizations
353 (default=off). LinuxSampler provides CPU specific
354 assembly optimizations for the most important
355 synthesis algorithms. This is currently disabled
356 by default since current asm code is broken.],
357 [config_asm="yes"],
358 [config_asm="no"]
359 )
360 if test "$config_asm" = "yes"; then
361 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable hand-crafted asm optimizations.])
362 fi
363
364 AC_ARG_ENABLE(dev-mode,
365 [ --disable-dev-mode
366 Disable development mode (default=on). In that mode
367 we do some extra sanity checks here and there.
368 This helps to spot possible problems, but reduces
369 efficiency a bit],
370 [config_dev_mode="no"],
371 [config_dev_mode="yes"]
372 )
373 if test "$config_dev_mode" = "yes"; then
374 AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
375 fi
376
377 AC_ARG_ENABLE(debug-level,
378 [ --enable-debug-level
379 Specify verbosity of console messages (default=1).
380 The higher the value, the higher will be verbosity.
381 A value of 0 means no console output at all.
382 There's not really an upper limit but the usual
383 level of all messages is currently somewhere less
384 than 10.],
385 [config_debug_level="${enableval}"],
386 [config_debug_level="1"]
387 )
388 AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
389
390 AC_ARG_ENABLE(rt-exceptions,
391 [ --enable-rt-exceptions
392 Enable exceptions in the realtime thread
393 (default=no). If this is enabled, exceptions will
394 be thrown on critical errors in the realtime
395 context as well. Otherwise if disabled
396 segmentation faults will be forced by the
397 application on critical errors.],
398 [config_rt_exceptions="yes"],
399 [config_rt_exceptions="no"]
400 )
401 if test "$config_rt_exceptions" = "yes"; then
402 AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
403 fi
404
405 AC_ARG_ENABLE(preload-samples,
406 [ --enable-preload-samples
407 Due to seeking and latency issues with hard drives
408 we have to cache a small part of samples' head in
409 RAM (default=32768). The higher this value the
410 more memory will be occupied for each sample, but
411 the safer this will be in regards of possible
412 droputs. A 'good' value depends on the running
413 system and usage dependant factors.],
414 [config_preload_samples="${enableval}"],
415 [config_preload_samples="32768"]
416 )
417 AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
418
419 AC_ARG_ENABLE(max-pitch,
420 [ --enable-max-pitch
421 Specify the maximum allowed pitch value in octaves
422 (default=4). To lower memory usage you might want
423 set a smaller value.],
424 [config_max_pitch="${enableval}"],
425 [config_max_pitch="4"]
426 )
427 AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
428
429 AC_ARG_ENABLE(max-events,
430 [ --enable-max-events
431 Specify the maximum allowed amount of events to be
432 processed per fragment (default=1024).],
433 [config_max_events="${enableval}"],
434 [config_max_events="1024"]
435 )
436 AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
437
438 AC_ARG_ENABLE(eg-bottom,
439 [ --enable-eg-bottom
440 Bottom limit of envelope generators
441 (default=0.001). Certain kinds of curve types like
442 exponential curves converge against 0 but never
443 reach 0. So we have to define a certain low value
444 after which we should consider all smaller values
445 to be 'almost zero'. The smaller this value, the
446 longer will voices survive in EG's release stage
447 and thus waste voices. If this value is too high
448 will cause click sounds though.],
449 [config_eg_bottom="${enableval}"],
450 [config_eg_bottom="0.001"]
451 )
452 AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
453
454 AC_ARG_ENABLE(eg-min-release-time,
455 [ --enable-eg-min-release-time
456 Specify the lowest allowed release time in seconds
457 (default=0.0025). This value will also be used to
458 ramp down voices on voice stealing. This value
459 should always be less than the period time of the
460 used audio driver, as in case of voice stealing
461 the killed voice needs to be completely ramped
462 down in the same fragment.],
463 [config_eg_min_release_time="${enableval}"],
464 [config_eg_min_release_time="0.0025"]
465 )
466 AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
467
468 AC_ARG_ENABLE(refill-streams,
469 [ --enable-refill-streams
470 Number of streams that should be refilled in each
471 disk thread cycle (default=4).],
472 [config_refill_streams="${enableval}"],
473 [config_refill_streams="4"]
474 )
475 AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
476
477 AC_ARG_ENABLE(stream-min-refill,
478 [ --enable-stream-min-refill
479 Minimum refill size for disk streams (default=1024).
480 The disk thread will go to sleep for a while if no
481 stream had to be refilled more than this value in
482 a disk thread cycle.],
483 [config_stream_min_refill="${enableval}"],
484 [config_stream_min_refill="1024"]
485 )
486 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
487
488 AC_ARG_ENABLE(stream-max-refill,
489 [ --enable-stream-max-refill
490 Maximum refill size for disk streams
491 (default=65536). The disk thread will refill
492 each stream only by a size of this value per
493 disk thread cycle.],
494 [config_stream_max_refill="${enableval}"],
495 [config_stream_max_refill="65536"]
496 )
497 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
498
499 AC_ARG_ENABLE(stream-size,
500 [ --enable-stream-size
501 Size of each stream's ring buffer in sample points
502 (default=262144).],
503 [config_stream_size="${enableval}"],
504 [config_stream_size="262144"]
505 )
506 AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
507
508 AC_ARG_ENABLE(max-streams,
509 [ --enable-max-streams
510 Maximum amount of disk streams (default=90). This
511 value should always be higher than the maximum
512 amount of voices.],
513 [config_max_streams="${enableval}"],
514 [config_max_streams="90"]
515 )
516 AC_DEFINE_UNQUOTED(CONFIG_MAX_STREAMS, $config_max_streams, [Define max. streams.])
517
518 AC_ARG_ENABLE(max-voices,
519 [ --enable-max-voices
520 Maximum amount of voices (default=64). This value
521 should always be lower than the maximum amount of
522 disk streams.],
523 [config_max_voices="${enableval}"],
524 [config_max_voices="64"]
525 )
526 AC_DEFINE_UNQUOTED(CONFIG_MAX_VOICES, $config_max_voices, [Define max. voices.])
527
528 AC_ARG_ENABLE(subfragment-size,
529 [ --enable-subfragment-size
530 Every audio fragment will be splitted into
531 subfragments. Where each subfragment renders
532 audio with constant synthesis parameters. This is
533 done for efficiency reasons. This parameter
534 defines the default size of a subfragment in
535 sample points. A large value means less CPU time
536 whereas a low value means better audio quality
537 (default=32).],
538 [config_subfragment_size="${enableval}"],
539 [config_subfragment_size="32"]
540 )
541 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
542
543 AC_ARG_ENABLE(global-attenuation-default,
544 [ --enable-global-attenuation-default
545 To prevent clipping all samples will be lowered
546 in amplitude by this given default factor (can
547 be overridden at runtime).
548 (default=0.35)],
549 [config_global_attenuation_default="${enableval}"],
550 [config_global_attenuation_default="0.35"]
551 )
552 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
553
554 AC_ARG_ENABLE(voice-steal-algo,
555 [ --enable-voice-steal-algo
556 Voice stealing algorithm to be used. Currently
557 available options:
558 none:
559 Disable voice stealing completely.
560 oldestvoiceonkey (default):
561 Try to kill a voice on the same key first,
562 if no success, proceed with the oldest key.
563 oldestkey:
564 Try to kill a voice from the oldest active
565 key.],
566 [ if test ! "(" "${enableval}" = "none" \
567 -o "${enableval}" = "oldestvoiceonkey" \
568 -o "${enableval}" = "oldestkey" ")" ; then
569 AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
570 else
571 config_voice_steal_algo="${enableval}"
572 fi
573 ],
574 [config_voice_steal_algo="oldestvoiceonkey"]
575 )
576 AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
577
578 AC_ARG_ENABLE(sysex-buffer-size,
579 [ --enable-sysex-buffer-size
580 System Exclusive Message buffer size in kB
581 (default=2048).],
582 [config_sysex_buffer_size="${enableval}"],
583 [config_sysex_buffer_size="2048"]
584 )
585 AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
586
587 AC_ARG_ENABLE(force-filter,
588 [ --enable-force-filter
589 If enabled will force filter to be used even if
590 no usage was define in instrument patch files.
591 (default=no).],
592 [config_force_filter="yes"],
593 [config_force_filter="no"]
594 )
595 if test "$config_force_filter" = "yes"; then
596 AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
597 fi
598
599 AC_ARG_ENABLE(filter-cutoff-min,
600 [ --enable-filter-cutoff-min
601 Minimum filter cutoff frequency in Hz
602 (default=100.0).],
603 [config_filter_cutoff_min="${enableval}"],
604 [config_filter_cutoff_min="100.0"]
605 )
606 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
607
608 AC_ARG_ENABLE(filter-cutoff-max,
609 [ --enable-filter-cutoff-max
610 Maximum filter cutoff frequency in Hz
611 (default=10000.0).],
612 [config_filter_cutoff_max="${enableval}"],
613 [config_filter_cutoff_max="10000.0"]
614 )
615 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
616
617 AC_ARG_ENABLE(override-cutoff-ctrl,
618 [ --enable-override-cutoff-ctrl
619 Override filter cutoff MIDI controller (default=no).
620 Note: you have to define the MIDI controller number
621 here, it's not a boolean parameter type! If this
622 option is used, controller number given by
623 instrument patch will be ignored and instead this
624 supplied value will be used.],
625 [config_override_cutoff_ctrl="${enableval}"],
626 [config_override_cutoff_ctrl="no"]
627 )
628 if test ! "$config_override_cutoff_ctrl" = "no"; then
629 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
630 fi
631
632 AC_ARG_ENABLE(override-resonance-ctrl,
633 [ --enable-override-resonance-ctrl
634 Override filter resonance MIDI controller
635 (default=no). Note: you have to define the MIDI
636 controller number here, it's not a boolean
637 parameter type! If this option is used, controller
638 number given by instrument patch will be ignored
639 and instead this supplied value will be used.],
640 [config_override_resonance_ctrl="${enableval}"],
641 [config_override_resonance_ctrl="no"]
642 )
643 if test ! "$config_override_resonance_ctrl" = "no"; then
644 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
645 fi
646
647 AC_ARG_ENABLE(override-filter-type,
648 [ --enable-override-filter-type
649 Override filter type (default=no). Options:
650 hp: for highpass
651 bp: for bandpass
652 br: for bandreject
653 lp: for lowpass
654 lpt: for lowpass turbo],
655 [ if test "${enableval}" = "hp" ; then
656 config_override_filter_type="::gig::vcf_type_highpass"
657 elif test "${enableval}" = "bp" ; then
658 config_override_filter_type="::gig::vcf_type_bandpass"
659 elif test "${enableval}" = "br" ; then
660 config_override_filter_type="::gig::vcf_type_bandreject"
661 elif test "${enableval}" = "lp" ; then
662 config_override_filter_type="::gig::vcf_type_lowpass"
663 elif test "${enableval}" = "lpt" ; then
664 config_override_filter_type="::gig::vcf_type_lowpassturbo"
665 elif test ! "${enableval}" = "no"; then
666 AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
667 fi
668 ],
669 [config_override_filter_type="no"]
670 )
671 if test ! "$config_override_filter_type" = "no"; then
672 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
673 fi
674
675 AC_ARG_ENABLE(gs-checksum,
676 [ --enable-gs-checksum
677 Enable Roland General Synth SysEx checksum check
678 (default=no). If this is enabled, all GS SysEx
679 messages which do not provide a correct checksum
680 will be ignored. This is disabled by default as
681 not all devices honor GS checksums.],
682 [config_assert_gs_sysex_checksum="yes"],
683 [config_assert_gs_sysex_checksum="no"]
684 )
685 if test "config_assert_gs_sysex_checksum" = "yes"; then
686 AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
687 fi
688
689 AC_ARG_ENABLE(portamento-time-min,
690 [ --enable-portamento-time-min
691 Minimum Portamento time in seconds
692 (default=0.1).],
693 [config_portamento_time_min="${enableval}"],
694 [config_portamento_time_min="0.1"]
695 )
696 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
697
698 AC_ARG_ENABLE(portamento-time-max,
699 [ --enable-portamento-time-max
700 Maximum Portamento time in seconds
701 (default=32).],
702 [config_portamento_time_max="${enableval}"],
703 [config_portamento_time_max="32"]
704 )
705 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
706
707 AC_ARG_ENABLE(portamento-time-default,
708 [ --enable-portamento-time-default
709 Default Portamento time in seconds
710 (default=1).],
711 [config_portamento_time_default="${enableval}"],
712 [config_portamento_time_default="1"]
713 )
714 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
715
716 AC_ARG_ENABLE(signed-triang-algo,
717 [ --enable-signed-triang-algo
718 Signed triangular wave algorithm to be used (e.g. for LFOs).
719 Currently available options:
720 intmath:
721 Uses integer math without any branch will then be
722 converted to floating point value for each sample point.
723 This int->float conversion might hurt on some systems.
724 intmathabs:
725 Similar to intmath but uses abs() function.
726 Depending on compiler and platrofm this could
727 perform better than integer math as it avoids
728 an extra integer multiply instruction.
729
730 diharmonic:
731 The triangular wave will be approximated by adding two
732 sinusoidials. This solution might especially hurt on
733 systems with weak floating point unit.
734 benchmark (default):
735 This is not an algorithm. Use this option if the
736 appropriate algorithm should be automatically
737 chosen by the configure script by performing a
738 benchmark between the algorithms mentioned above.
739 This will NOT work for cross compilation!],
740 [ if test ! "(" "${enableval}" = "intmath" \
741 -o "${enableval}" = "intmathabs" \
742 -o "${enableval}" = "diharmonic" ")" ; then
743 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
744 else
745 config_signed_triang_algo="${enableval}"
746 fi
747 ],
748 [config_signed_triang_algo="benchmark"]
749 )
750
751 AC_ARG_ENABLE(unsigned-triang-algo,
752 [ --enable-unsigned-triang-algo
753 Unsigned triangular wave algorithm to be used (e.g. for LFOs).
754 Currently available options:
755 intmath:
756 Uses integer math without any branch will then be
757 converted to floating point value for each sample point.
758 This int->float conversion might hurt on some systems.
759 intmathabs:
760 Similar to intmath but uses abs() function.
761 Depending on compiler and platrofm this could
762 perform better than integer math as it avoids
763 an extra integer multiply instruction.
764
765 diharmonic:
766 The triangular wave will be approximated by adding two
767 sinusoidials. This solution might especially hurt on
768 systems with weak floating point unit.
769 benchmark (default):
770 This is not an algorithm. Use this option if the
771 appropriate algorithm should be automatically
772 chosen by the configure script by performing a
773 benchmark between the algorithms mentioned above.
774 This will NOT work for cross compilation!],
775 [ if test ! "(" "${enableval}" = "intmath" \
776 -o "${enableval}" = "intmathabs" \
777 -o "${enableval}" = "diharmonic" ")" ; then
778 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
779 else
780 config_unsigned_triang_algo="${enableval}"
781 fi
782 ],
783 [config_unsigned_triang_algo="benchmark"]
784 )
785
786 AC_ARG_ENABLE(process-muted-channels,
787 [ --enable-process-muted-channels
788 Enable processing of muted channels (default=no).
789 In that mode all MIDI events in the muted channels
790 will be processed. This will provide information
791 about the active voices in the muted channels and
792 will not discard notes, triggered in mute mode,
793 when the channel is unmuted. But also will reduce
794 the efficiency.],
795 [config_process_muted_channels="yes"],
796 [config_process_muted_channels="no"]
797 )
798 if test "$config_process_muted_channels" = "yes"; then
799 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
800 fi
801
802 AC_ARG_ENABLE(process-all-notes-off,
803 [ --disable-process-all-notes-off
804 Disable interpretation of All-Notes-Off MIDI
805 messages (default=on). By default LS will release
806 all voices whenever it receives an All-Notes-Off
807 MIDI message. You can disable this behavior, so
808 that LS simply ignores such messages.],
809 [config_process_all_notes_off="no"],
810 [config_process_all_notes_off="yes"]
811 )
812 if test "$config_process_all_notes_off" = "yes"; then
813 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
814 fi
815
816 AC_ARG_ENABLE(interpolate-volume,
817 [ --disable-interpolate-volume
818 Disable interpolation of volume modulation
819 (default=on). With this enabled, the volume changes
820 generated by for example the envelope generator
821 will be smoother, minimizing the risk for audio
822 clicks. Disable it to reduce CPU usage.],
823 [config_interpolate_volume="no"],
824 [config_interpolate_volume="yes"]
825 )
826 if test "$config_interpolate_volume" = "yes"; then
827 AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
828 fi
829
830
831 ###########################################################################
832 # Automatic Benchmarks (to detect the best algorithms for the system)
833
834 AC_LANG_SAVE
835
836 if test "$config_signed_triang_algo" = "benchmark"; then
837 echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
838 AC_LANG_CPLUSPLUS
839 AC_TRY_RUN([
840 #define SIGNED 1
841 #define SILENT 1
842 #include "${srcdir}/benchmarks/triang.cpp"
843 ],
844 triang_signed=0,
845 triang_signed=$?,
846 triang_signed=0
847 )
848 if test "$triang_signed" = "2"; then
849 config_signed_triang_algo="intmath"
850 echo "integer math"
851 elif test "$triang_signed" = "3"; then
852 config_signed_triang_algo="diharmonic"
853 echo "di harmonics"
854 elif test "$triang_signed" = "5"; then
855 config_signed_triang_algo="intmathabs"
856 echo "integer math using abs()"
857 else
858 echo "Benchmark of signed triangular wave algorithms failed!"
859 echo "Maybe you are doing cross compilation? In that case you have to select"
860 echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
861 echo "Call './configure --help' for further information or read configure.in."
862 exit -1;
863 fi
864 fi
865 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
866
867 if test "$config_unsigned_triang_algo" = "benchmark"; then
868 echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
869 AC_LANG_CPLUSPLUS
870 AC_TRY_RUN([
871 #define SIGNED 0
872 #define SILENT 1
873 #include "${srcdir}/benchmarks/triang.cpp"
874 ],
875 triang_unsigned=0,
876 triang_unsigned=$?,
877 triang_unsigned=0
878 )
879 if test "$triang_unsigned" = "2"; then
880 config_unsigned_triang_algo="intmath"
881 echo "integer math"
882 elif test "$triang_unsigned" = "3"; then
883 config_unsigned_triang_algo="diharmonic"
884 echo "di harmonics"
885 elif test "$triang_unsigned" = "5"; then
886 config_unsigned_triang_algo="intmathabs"
887 echo "integer math using abs()"
888 else
889 echo "Benchmark of unsigned triangular wave algorithms failed!"
890 echo "Maybe you are doing cross compilation? In that case you have to select"
891 echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
892 echo "Call './configure --help' for further information or read configure.in."
893 exit -1;
894 fi
895 fi
896 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
897
898 AC_LANG_RESTORE
899
900
901 ###########################################################################
902 # Create Build Files
903
904 AM_CONFIG_HEADER(config.h)
905 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
906
907 AC_LANG_CPLUSPLUS
908 AC_PROG_CXX
909
910 # some gcc 4.0 versions need -msse for SSE register allocations
911 if test "$config_asm" = "yes"; then
912 if test "$def_arch_x86" = 1; then
913 CXXFLAGS="$CXXFLAGS -msse"
914 fi
915 fi
916
917 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
918 # this, the dlfcn.h check in am_prog_libtool may fail.
919 AC_CHECK_HEADER(stdlib.h)
920
921 AC_OUTPUT( \
922 Makefile \
923 man/Makefile \
924 man/linuxsampler.1 \
925 src/Makefile \
926 src/db/Makefile \
927 src/network/Makefile \
928 src/engines/Makefile \
929 src/engines/gig/Makefile \
930 src/engines/common/Makefile \
931 src/common/Makefile src/lib/Makefile \
932 src/lib/fileloader/Makefile \
933 src/lib/fileloader/libgig/Makefile \
934 src/testcases/Makefile \
935 src/drivers/Makefile \
936 src/drivers/audio/Makefile \
937 src/drivers/midi/Makefile \
938 linuxsampler.spec \
939 debian/Makefile \
940 Artwork/Makefile \
941 scripts/Makefile \
942 osx/Makefile \
943 osx/LinuxSampler.xcode/Makefile \
944 Documentation/Makefile \
945 Documentation/Engines/Makefile \
946 Documentation/Engines/gig/Makefile \
947 linuxsampler.pc \
948 Doxyfile \
949 )
950
951
952 ###########################################################################
953 # Output All Configuration Options
954
955 echo ""
956 echo "#####################################################################"
957 echo "# LinuxSampler Configuration #"
958 echo "#-------------------------------------------------------------------#"
959 echo "# Assembly Optimizations: ${config_asm}"
960 echo "# Development Mode: ${config_dev_mode}"
961 echo "# Debug Level: ${config_debug_level}"
962 echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
963 echo "# Preload Samples: ${config_preload_samples}"
964 echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
965 echo "# Maximum Events: ${config_max_events}"
966 echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
967 echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
968 echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
969 echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
970 echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
971 echo "# Stream Size: ${config_stream_size}"
972 echo "# Maximum Disk Streams: ${config_max_streams}"
973 echo "# Maximum Voices: ${config_max_voices}"
974 echo "# Default Subfragment Size: ${config_subfragment_size}"
975 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
976 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
977 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
978 echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
979 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
980 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
981 echo "# Max. Portamento Time: ${config_portamento_time_max} s"
982 echo "# Default Portamento Time: ${config_portamento_time_default} s"
983 echo "# Force Filter Usage: ${config_force_filter}"
984 echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
985 echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
986 echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
987 echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
988 echo "# Override Filter Type: ${config_override_filter_type}"
989 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
990 echo "# Process Muted Channels: ${config_process_muted_channels}"
991 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
992 echo "# Interpolate Volume: ${config_interpolate_volume}"
993 echo "# Instruments database support: ${instruments_db_support}"
994 echo "#-------------------------------------------------------------------#"
995 echo "# Read './configure --help' or file 'configure.in' for details. #"
996 echo "#####################################################################"
997 echo ""
998 echo "Good. Now type 'make' to compile, followed by 'make install' as root."
999 echo ""

  ViewVC Help
Powered by ViewVC