/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Contents of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1165 - (show annotations) (download)
Thu May 3 18:09:02 2007 UTC (16 years, 10 months ago) by schoenebeck
Original Path: linuxsampler/trunk/configure.in
File size: 42129 byte(s)
* fixed OSX and cross compilation related error
  (patch by Toshi Nagata)

1 AC_INIT(configure.in)
2
3 #------------------------------------------------------------------------------------
4 # LinuxSampler's / liblinuxsampler's "official" release version:
5
6 LINUXSAMPLER_RELEASE_MAJOR=0
7 LINUXSAMPLER_RELEASE_MINOR=4
8 LINUXSAMPLER_RELEASE_BUILD=0.4cvs
9
10 #------------------------------------------------------------------------------------
11 # The following is the libtool / shared library version. This doesn't have to
12 # do anything with the release version. It MUST conform to the following rules:
13 #
14 # 1. Start with version information of `0:0:0' for each libtool library.
15 # 2. Update the version information only immediately before a public release of
16 # your software. More frequent updates are unnecessary, and only guarantee
17 # that the current interface number gets larger faster.
18 # 3. If the library source code has changed at all since the last update, then
19 # increment revision (`c:r:a' becomes `c:r+1:a').
20 # 4. If any interfaces have been added, removed, or changed since the last update,
21 # increment current, and set revision to 0.
22 # 5. If any interfaces have been added since the last public release, then increment
23 # age.
24 # 6. If any interfaces have been removed since the last public release, then set age
25 # to 0.
26
27 LIBLINUXSAMPLER_LT_CURRENT=0
28 LIBLINUXSAMPLER_LT_REVISION=0
29 LIBLINUXSAMPLER_LT_AGE=0
30 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31
32 #------------------------------------------------------------------------------------
33 # the LSCP specification version this LinuSampler release complies with:
34
35 LSCP_RELEASE_MAJOR=1
36 LSCP_RELEASE_MINOR=2
37
38 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40
41 AM_PROG_LIBTOOL
42
43 AC_SUBST(SHLIB_VERSION_ARG)
44 AC_SUBST(SHARED_VERSION_INFO)
45
46 AC_C_BIGENDIAN
47 AC_CANONICAL_SYSTEM
48
49 AC_SUBST(target)
50 AC_SUBST(target_alias)
51 AC_SUBST(target_cpu)
52 AC_SUBST(target_os)
53 AC_SUBST(target_vendor)
54
55
56 ###########################################################################
57 # General Checks
58
59 AC_MSG_CHECKING([whether x86 architecture])
60 def_arch_x86=0
61 case $target_cpu in
62 "i386" | "i486" | "i586" | "i686" | "i786")
63 echo "yes"
64 def_arch_x86=1;;
65 *)
66 echo "no";;
67 esac
68 AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
69
70 # determine the right gcc switch for CPU specific optimizations
71 # (only if the user did not provide one)
72 CXX_CPU_SWITCH=
73 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
74 if test "$def_arch_x86" = 1; then
75 CXX_CPU_SWITCH="-march=$target_cpu"
76 elif test "$target_cpu" = "ppc"; then
77 CXX_CPU_SWITCH="-arch=$target_cpu"
78 fi
79 fi
80 AC_SUBST([CXX_CPU_SWITCH])
81
82 AC_MSG_CHECKING([whether UNIX98 compatible])
83 AC_LANG_SAVE
84 AC_LANG_C
85 AC_TRY_RUN([
86 #ifndef _GNU_SOURCE
87 #define _GNU_SOURCE 1
88 #endif
89 #include <features.h>
90 void main(void) {
91 #if _XOPEN_SOURCE >= 500
92 exit(0); /* UNIX98 compatible */
93 #else
94 exit(-1); /* not UNIX98 compatible */
95 #endif
96 }
97 ],
98 have_unix98="yes",
99 have_unix98="no",
100 have_unix98="no"
101 )
102 AC_LANG_RESTORE
103 AC_MSG_RESULT([$have_unix98])
104 if test "$have_unix98" = "no"; then
105 if test "x$HAVE_UNIX98" = "x"; then
106 echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
107 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
108 echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
109 echo "have a UNIX98 compatible system."
110 exit -1;
111 fi
112 fi
113
114 # check for <features.h>
115 AC_CHECK_HEADERS(features.h)
116
117
118 ###########################################################################
119 # Checks for available audio and MIDI systems / drivers
120 # (we throw an error if there's not at least one system for audio output and MIDI input available)
121
122 have_midi_input_driver="false"
123 have_audio_output_driver="false"
124
125 # ALSA
126 AC_ARG_ENABLE(alsa-driver,
127 [ --disable-alsa-driver
128 Disable support for the Advanced Linux Sound
129 Architecture (ALSA).],
130 [config_alsa_driver="no"],
131 [config_alsa_driver="yes"]
132 )
133 have_alsa=0
134 if test "$config_alsa_driver" = "yes"; then
135 AC_CHECK_HEADER(alsa/asoundlib.h,
136 AC_CHECK_LIB(asound, main,
137 have_alsa=1
138 ,
139 have_alsa=0
140 )
141 ,
142 have_alsa=0
143 )
144 if test "$have_alsa" = "1"; then
145 have_midi_input_driver="true"
146 have_audio_output_driver="true";
147 fi
148
149 echo -n "checking Alsa version... "
150 AC_LANG_SAVE
151 AC_LANG_C
152 AC_TRY_RUN([
153 #include <alsa/asoundlib.h>
154 void main(void) {
155 /* ensure backward compatibility */
156 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
157 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
158 #endif
159 exit(SND_LIB_MAJOR);
160 }
161 ],
162 alsa_major=0,
163 alsa_major=$?,
164 alsa_major=0
165 )
166 AC_TRY_RUN([
167 #include <alsa/asoundlib.h>
168 void main(void) {
169 /* ensure backward compatibility */
170 #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
171 #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
172 #endif
173 exit(SND_LIB_MINOR);
174 }
175 ],
176 alsa_minor=0,
177 alsa_minor=$?,
178 alsa_minor=0
179 )
180 AC_TRY_RUN([
181 #include <alsa/asoundlib.h>
182 void main(void) {
183 /* ensure backward compatibility */
184 #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
185 #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
186 #endif
187 exit(SND_LIB_SUBMINOR);
188 }
189 ],
190 alsa_subminor=0,
191 alsa_subminor=$?,
192 alsa_subminor=0
193 )
194 AC_LANG_RESTORE
195 echo "$alsa_major.$alsa_minor.$alsa_subminor";
196 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
197 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
198 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
199 else
200 echo "ALSA support disabled by configure script parameter"
201 fi
202 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
203 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
204
205 # JACK
206 AC_ARG_ENABLE(jack-driver,
207 [ --disable-jack-driver
208 Disable support for the Jack Audio Connection Kit
209 (JACK).],
210 [config_jack_driver="no"],
211 [config_jack_driver="yes"]
212 )
213 have_jack=0
214 if test "$config_jack_driver" = "yes"; then
215 PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
216 if test $have_jack = "1"; then
217 AC_SUBST(JACK_LIBS)
218 AC_SUBST(JACK_CFLAGS)
219 AC_CHECK_LIB(jack, jack_client_name_size, [AC_DEFINE(HAVE_JACK_CLIENT_NAME_SIZE, 1, [Define to 1 if you have the `jack_client_name_size' function.])], , $JACK_LIBS)
220 have_audio_output_driver="true";
221 fi
222 else
223 echo "JACK support disabled by configure script parameter"
224 fi
225 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
226 AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
227
228 # ARTS
229 AC_ARG_ENABLE(arts-driver,
230 [ --disable-arts-driver
231 Disable support for the Analogue Realtime System
232 (aRts).],
233 [config_arts_driver="no"],
234 [config_arts_driver="yes"]
235 )
236 have_arts=0
237 if test "$config_arts_driver" = "yes"; then
238 m4_ifdef([m4_include(m4/arts.m4)],,
239 [sinclude([m4/arts.m4])])
240 AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
241 if test "$have_arts" = "1"; then
242 have_audio_output_driver="true"
243 fi
244 else
245 echo "ARTS support disabled by configure script parameter"
246 fi
247 AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
248 AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
249
250 # MidiShare (Linux, OS X, Windows)
251 AC_ARG_ENABLE(midishare-driver,
252 [ --disable-midishare-driver
253 Disable support for the MidiShare system.],
254 [config_midishare_driver="no"],
255 [config_midishare_driver="yes"]
256 )
257 have_midishare=0
258 if test "$config_midishare_driver" = "yes"; then
259 AC_CHECK_HEADER(MidiShare.h,
260 AC_CHECK_LIB(MidiShare, MidiCountEvs,
261 have_midishare=1,
262 have_midishare=0
263 )
264 ,
265 have_midishare=0
266 )
267 if test "$have_midishare" = "1"; then
268 have_midi_input_driver="true"
269 fi
270 else
271 echo "MidiShare support disabled by configure script parameter"
272 fi
273 AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
274 AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
275
276 # CoreMIDI (OS X)
277 AC_ARG_ENABLE(coremidi-driver,
278 [ --disable-coremidi-driver
279 Disable support for the Apple CoreMIDI system.],
280 [config_coremidi_driver="no"],
281 [config_coremidi_driver="yes"]
282 )
283 have_coremidi=0
284 if test "$config_coremidi_driver" = "yes"; then
285 AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
286 have_coremidi=1,
287 have_coremidi=0
288 )
289 if test "$have_coremidi" = "1"; then
290 have_midi_input_driver="true"
291 fi
292 else
293 echo "CoreMIDI support disabled by configure script parameter"
294 fi
295 AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
296 AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
297
298 # Check presence of libgig
299 libgig_version="3.1.1"
300 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
301 if test "$HAVE_GIG" = "false"; then
302 echo "Required libgig version not found!"
303 echo "You need to have libgig version ${libgig_version} installed!"
304 exit -1;
305 else
306 echo "yes, found libgig $libgig_version"
307 fi
308 AC_SUBST(GIG_CFLAGS)
309 AC_SUBST(GIG_LIBS)
310
311 # Check presence of sqlite3
312 AC_CHECK_PROG(HAVE_SQLITE3_CMD, sqlite3, true, false)
313 sqlite_version="3.3"
314 PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
315 AC_SUBST(SQLITE3_LIBS)
316 AC_SUBST(SQLITE3_CFLAGS)
317 if test $HAVE_SQLITE3_CMD = false -o $HAVE_SQLITE3 = false; then
318 HAVE_SQLITE3=0;
319 instruments_db_support="no"
320 echo "*** Required sqlite version not found!"
321 echo "*** You need to have sqlite version ${sqlite_version} or higher"
322 echo "*** for instruments database support to be enabled."
323 echo "*** Support for instruments DB will be disabled!"
324 else
325 HAVE_SQLITE3=1
326 instruments_db_support="yes"
327 fi
328 AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
329 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you have SQLITE3 installed.])
330
331 if test "$have_midi_input_driver" = "false"; then
332 echo "No supported MIDI input system found!"
333 echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
334 echo "ALSA, MIDIShare, CoreMIDI."
335 echo "If you think you have one of those available on your system, make sure you"
336 echo "also have the respective development (header) files installed."
337 exit -1;
338 fi
339 if test "$have_audio_output_driver" = "false"; then
340 echo "No supported audio output system found!"
341 echo "Sorry, LinuxSampler only supports ALSA and JACK as audio output driver at the moment!"
342 exit -1;
343 fi
344
345
346 ###########################################################################
347 # Handle Configuration Options
348
349 # TODO: should we use AC_ARG_VAR(variable, description) instead?
350
351 AC_ARG_ENABLE(asm,
352 [ --enable-asm
353 Enable hand-crafted assembly optimizations
354 (default=off). LinuxSampler provides CPU specific
355 assembly optimizations for the most important
356 synthesis algorithms. This is currently disabled
357 by default since current asm code is broken.],
358 [config_asm="yes"],
359 [config_asm="no"]
360 )
361 if test "$config_asm" = "yes"; then
362 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable hand-crafted asm optimizations.])
363 fi
364
365 AC_ARG_ENABLE(dev-mode,
366 [ --disable-dev-mode
367 Disable development mode (default=on). In that mode
368 we do some extra sanity checks here and there.
369 This helps to spot possible problems, but reduces
370 efficiency a bit],
371 [config_dev_mode="no"],
372 [config_dev_mode="yes"]
373 )
374 if test "$config_dev_mode" = "yes"; then
375 AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
376 fi
377
378 AC_ARG_ENABLE(debug-level,
379 [ --enable-debug-level
380 Specify verbosity of console messages (default=1).
381 The higher the value, the higher will be verbosity.
382 A value of 0 means no console output at all.
383 There's not really an upper limit but the usual
384 level of all messages is currently somewhere less
385 than 10.],
386 [config_debug_level="${enableval}"],
387 [config_debug_level="1"]
388 )
389 AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
390
391 AC_ARG_ENABLE(rt-exceptions,
392 [ --enable-rt-exceptions
393 Enable exceptions in the realtime thread
394 (default=no). If this is enabled, exceptions will
395 be thrown on critical errors in the realtime
396 context as well. Otherwise if disabled
397 segmentation faults will be forced by the
398 application on critical errors.],
399 [config_rt_exceptions="yes"],
400 [config_rt_exceptions="no"]
401 )
402 if test "$config_rt_exceptions" = "yes"; then
403 AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
404 fi
405
406 AC_ARG_ENABLE(preload-samples,
407 [ --enable-preload-samples
408 Due to seeking and latency issues with hard drives
409 we have to cache a small part of samples' head in
410 RAM (default=32768). The higher this value the
411 more memory will be occupied for each sample, but
412 the safer this will be in regards of possible
413 droputs. A 'good' value depends on the running
414 system and usage dependant factors.],
415 [config_preload_samples="${enableval}"],
416 [config_preload_samples="32768"]
417 )
418 AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
419
420 AC_ARG_ENABLE(max-pitch,
421 [ --enable-max-pitch
422 Specify the maximum allowed pitch value in octaves
423 (default=4). To lower memory usage you might want
424 set a smaller value.],
425 [config_max_pitch="${enableval}"],
426 [config_max_pitch="4"]
427 )
428 AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
429
430 AC_ARG_ENABLE(max-events,
431 [ --enable-max-events
432 Specify the maximum allowed amount of events to be
433 processed per fragment (default=1024).],
434 [config_max_events="${enableval}"],
435 [config_max_events="1024"]
436 )
437 AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
438
439 AC_ARG_ENABLE(eg-bottom,
440 [ --enable-eg-bottom
441 Bottom limit of envelope generators
442 (default=0.001). Certain kinds of curve types like
443 exponential curves converge against 0 but never
444 reach 0. So we have to define a certain low value
445 after which we should consider all smaller values
446 to be 'almost zero'. The smaller this value, the
447 longer will voices survive in EG's release stage
448 and thus waste voices. If this value is too high
449 will cause click sounds though.],
450 [config_eg_bottom="${enableval}"],
451 [config_eg_bottom="0.001"]
452 )
453 AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
454
455 AC_ARG_ENABLE(eg-min-release-time,
456 [ --enable-eg-min-release-time
457 Specify the lowest allowed release time in seconds
458 (default=0.0025). This value will also be used to
459 ramp down voices on voice stealing. This value
460 should always be less than the period time of the
461 used audio driver, as in case of voice stealing
462 the killed voice needs to be completely ramped
463 down in the same fragment.],
464 [config_eg_min_release_time="${enableval}"],
465 [config_eg_min_release_time="0.0025"]
466 )
467 AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
468
469 AC_ARG_ENABLE(refill-streams,
470 [ --enable-refill-streams
471 Number of streams that should be refilled in each
472 disk thread cycle (default=4).],
473 [config_refill_streams="${enableval}"],
474 [config_refill_streams="4"]
475 )
476 AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
477
478 AC_ARG_ENABLE(stream-min-refill,
479 [ --enable-stream-min-refill
480 Minimum refill size for disk streams (default=1024).
481 The disk thread will go to sleep for a while if no
482 stream had to be refilled more than this value in
483 a disk thread cycle.],
484 [config_stream_min_refill="${enableval}"],
485 [config_stream_min_refill="1024"]
486 )
487 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
488
489 AC_ARG_ENABLE(stream-max-refill,
490 [ --enable-stream-max-refill
491 Maximum refill size for disk streams
492 (default=65536). The disk thread will refill
493 each stream only by a size of this value per
494 disk thread cycle.],
495 [config_stream_max_refill="${enableval}"],
496 [config_stream_max_refill="65536"]
497 )
498 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
499
500 AC_ARG_ENABLE(stream-size,
501 [ --enable-stream-size
502 Size of each stream's ring buffer in sample points
503 (default=262144).],
504 [config_stream_size="${enableval}"],
505 [config_stream_size="262144"]
506 )
507 AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
508
509 AC_ARG_ENABLE(max-streams,
510 [ --enable-max-streams
511 Maximum amount of disk streams (default=90). This
512 value should always be higher than the maximum
513 amount of voices.],
514 [config_max_streams="${enableval}"],
515 [config_max_streams="90"]
516 )
517 AC_DEFINE_UNQUOTED(CONFIG_MAX_STREAMS, $config_max_streams, [Define max. streams.])
518
519 AC_ARG_ENABLE(max-voices,
520 [ --enable-max-voices
521 Maximum amount of voices (default=64). This value
522 should always be lower than the maximum amount of
523 disk streams.],
524 [config_max_voices="${enableval}"],
525 [config_max_voices="64"]
526 )
527 AC_DEFINE_UNQUOTED(CONFIG_MAX_VOICES, $config_max_voices, [Define max. voices.])
528
529 AC_ARG_ENABLE(subfragment-size,
530 [ --enable-subfragment-size
531 Every audio fragment will be splitted into
532 subfragments. Where each subfragment renders
533 audio with constant synthesis parameters. This is
534 done for efficiency reasons. This parameter
535 defines the default size of a subfragment in
536 sample points. A large value means less CPU time
537 whereas a low value means better audio quality
538 (default=32).],
539 [config_subfragment_size="${enableval}"],
540 [config_subfragment_size="32"]
541 )
542 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
543
544 AC_ARG_ENABLE(global-attenuation-default,
545 [ --enable-global-attenuation-default
546 To prevent clipping all samples will be lowered
547 in amplitude by this given default factor (can
548 be overridden at runtime).
549 (default=0.35)],
550 [config_global_attenuation_default="${enableval}"],
551 [config_global_attenuation_default="0.35"]
552 )
553 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
554
555 AC_ARG_ENABLE(voice-steal-algo,
556 [ --enable-voice-steal-algo
557 Voice stealing algorithm to be used. Currently
558 available options:
559 none:
560 Disable voice stealing completely.
561 oldestvoiceonkey (default):
562 Try to kill a voice on the same key first,
563 if no success, proceed with the oldest key.
564 oldestkey:
565 Try to kill a voice from the oldest active
566 key.],
567 [ if test ! "(" "${enableval}" = "none" \
568 -o "${enableval}" = "oldestvoiceonkey" \
569 -o "${enableval}" = "oldestkey" ")" ; then
570 AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
571 else
572 config_voice_steal_algo="${enableval}"
573 fi
574 ],
575 [config_voice_steal_algo="oldestvoiceonkey"]
576 )
577 AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
578
579 AC_ARG_ENABLE(sysex-buffer-size,
580 [ --enable-sysex-buffer-size
581 System Exclusive Message buffer size in kB
582 (default=2048).],
583 [config_sysex_buffer_size="${enableval}"],
584 [config_sysex_buffer_size="2048"]
585 )
586 AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
587
588 AC_ARG_ENABLE(force-filter,
589 [ --enable-force-filter
590 If enabled will force filter to be used even if
591 no usage was define in instrument patch files.
592 (default=no).],
593 [config_force_filter="yes"],
594 [config_force_filter="no"]
595 )
596 if test "$config_force_filter" = "yes"; then
597 AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
598 fi
599
600 AC_ARG_ENABLE(filter-cutoff-min,
601 [ --enable-filter-cutoff-min
602 Minimum filter cutoff frequency in Hz
603 (default=100.0).],
604 [config_filter_cutoff_min="${enableval}"],
605 [config_filter_cutoff_min="100.0"]
606 )
607 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
608
609 AC_ARG_ENABLE(filter-cutoff-max,
610 [ --enable-filter-cutoff-max
611 Maximum filter cutoff frequency in Hz
612 (default=10000.0).],
613 [config_filter_cutoff_max="${enableval}"],
614 [config_filter_cutoff_max="10000.0"]
615 )
616 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
617
618 AC_ARG_ENABLE(override-cutoff-ctrl,
619 [ --enable-override-cutoff-ctrl
620 Override filter cutoff MIDI controller (default=no).
621 Note: you have to define the MIDI controller number
622 here, it's not a boolean parameter type! If this
623 option is used, controller number given by
624 instrument patch will be ignored and instead this
625 supplied value will be used.],
626 [config_override_cutoff_ctrl="${enableval}"],
627 [config_override_cutoff_ctrl="no"]
628 )
629 if test ! "$config_override_cutoff_ctrl" = "no"; then
630 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
631 fi
632
633 AC_ARG_ENABLE(override-resonance-ctrl,
634 [ --enable-override-resonance-ctrl
635 Override filter resonance MIDI controller
636 (default=no). Note: you have to define the MIDI
637 controller number here, it's not a boolean
638 parameter type! If this option is used, controller
639 number given by instrument patch will be ignored
640 and instead this supplied value will be used.],
641 [config_override_resonance_ctrl="${enableval}"],
642 [config_override_resonance_ctrl="no"]
643 )
644 if test ! "$config_override_resonance_ctrl" = "no"; then
645 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
646 fi
647
648 AC_ARG_ENABLE(override-filter-type,
649 [ --enable-override-filter-type
650 Override filter type (default=no). Options:
651 hp: for highpass
652 bp: for bandpass
653 br: for bandreject
654 lp: for lowpass
655 lpt: for lowpass turbo],
656 [ if test "${enableval}" = "hp" ; then
657 config_override_filter_type="::gig::vcf_type_highpass"
658 elif test "${enableval}" = "bp" ; then
659 config_override_filter_type="::gig::vcf_type_bandpass"
660 elif test "${enableval}" = "br" ; then
661 config_override_filter_type="::gig::vcf_type_bandreject"
662 elif test "${enableval}" = "lp" ; then
663 config_override_filter_type="::gig::vcf_type_lowpass"
664 elif test "${enableval}" = "lpt" ; then
665 config_override_filter_type="::gig::vcf_type_lowpassturbo"
666 elif test ! "${enableval}" = "no"; then
667 AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
668 fi
669 ],
670 [config_override_filter_type="no"]
671 )
672 if test ! "$config_override_filter_type" = "no"; then
673 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
674 fi
675
676 AC_ARG_ENABLE(gs-checksum,
677 [ --enable-gs-checksum
678 Enable Roland General Synth SysEx checksum check
679 (default=no). If this is enabled, all GS SysEx
680 messages which do not provide a correct checksum
681 will be ignored. This is disabled by default as
682 not all devices honor GS checksums.],
683 [config_assert_gs_sysex_checksum="yes"],
684 [config_assert_gs_sysex_checksum="no"]
685 )
686 if test "config_assert_gs_sysex_checksum" = "yes"; then
687 AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
688 fi
689
690 AC_ARG_ENABLE(portamento-time-min,
691 [ --enable-portamento-time-min
692 Minimum Portamento time in seconds
693 (default=0.1).],
694 [config_portamento_time_min="${enableval}"],
695 [config_portamento_time_min="0.1"]
696 )
697 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
698
699 AC_ARG_ENABLE(portamento-time-max,
700 [ --enable-portamento-time-max
701 Maximum Portamento time in seconds
702 (default=32).],
703 [config_portamento_time_max="${enableval}"],
704 [config_portamento_time_max="32"]
705 )
706 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
707
708 AC_ARG_ENABLE(portamento-time-default,
709 [ --enable-portamento-time-default
710 Default Portamento time in seconds
711 (default=1).],
712 [config_portamento_time_default="${enableval}"],
713 [config_portamento_time_default="1"]
714 )
715 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
716
717 AC_ARG_ENABLE(signed-triang-algo,
718 [ --enable-signed-triang-algo
719 Signed triangular wave algorithm to be used (e.g. for LFOs).
720 Currently available options:
721 intmath:
722 Uses integer math without any branch will then be
723 converted to floating point value for each sample point.
724 This int->float conversion might hurt on some systems.
725 intmathabs:
726 Similar to intmath but uses abs() function.
727 Depending on compiler and platrofm this could
728 perform better than integer math as it avoids
729 an extra integer multiply instruction.
730
731 diharmonic:
732 The triangular wave will be approximated by adding two
733 sinusoidials. This solution might especially hurt on
734 systems with weak floating point unit.
735 benchmark (default):
736 This is not an algorithm. Use this option if the
737 appropriate algorithm should be automatically
738 chosen by the configure script by performing a
739 benchmark between the algorithms mentioned above.
740 This will NOT work for cross compilation!],
741 [ if test ! "(" "${enableval}" = "intmath" \
742 -o "${enableval}" = "intmathabs" \
743 -o "${enableval}" = "diharmonic" ")" ; then
744 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
745 else
746 config_signed_triang_algo="${enableval}"
747 fi
748 ],
749 [config_signed_triang_algo="benchmark"]
750 )
751
752 AC_ARG_ENABLE(unsigned-triang-algo,
753 [ --enable-unsigned-triang-algo
754 Unsigned triangular wave algorithm to be used (e.g. for LFOs).
755 Currently available options:
756 intmath:
757 Uses integer math without any branch will then be
758 converted to floating point value for each sample point.
759 This int->float conversion might hurt on some systems.
760 intmathabs:
761 Similar to intmath but uses abs() function.
762 Depending on compiler and platrofm this could
763 perform better than integer math as it avoids
764 an extra integer multiply instruction.
765
766 diharmonic:
767 The triangular wave will be approximated by adding two
768 sinusoidials. This solution might especially hurt on
769 systems with weak floating point unit.
770 benchmark (default):
771 This is not an algorithm. Use this option if the
772 appropriate algorithm should be automatically
773 chosen by the configure script by performing a
774 benchmark between the algorithms mentioned above.
775 This will NOT work for cross compilation!],
776 [ if test ! "(" "${enableval}" = "intmath" \
777 -o "${enableval}" = "intmathabs" \
778 -o "${enableval}" = "diharmonic" ")" ; then
779 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
780 else
781 config_unsigned_triang_algo="${enableval}"
782 fi
783 ],
784 [config_unsigned_triang_algo="benchmark"]
785 )
786
787 AC_ARG_ENABLE(process-muted-channels,
788 [ --enable-process-muted-channels
789 Enable processing of muted channels (default=no).
790 In that mode all MIDI events in the muted channels
791 will be processed. This will provide information
792 about the active voices in the muted channels and
793 will not discard notes, triggered in mute mode,
794 when the channel is unmuted. But also will reduce
795 the efficiency.],
796 [config_process_muted_channels="yes"],
797 [config_process_muted_channels="no"]
798 )
799 if test "$config_process_muted_channels" = "yes"; then
800 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
801 fi
802
803 AC_ARG_ENABLE(process-all-notes-off,
804 [ --disable-process-all-notes-off
805 Disable interpretation of All-Notes-Off MIDI
806 messages (default=on). By default LS will release
807 all voices whenever it receives an All-Notes-Off
808 MIDI message. You can disable this behavior, so
809 that LS simply ignores such messages.],
810 [config_process_all_notes_off="no"],
811 [config_process_all_notes_off="yes"]
812 )
813 if test "$config_process_all_notes_off" = "yes"; then
814 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
815 fi
816
817 AC_ARG_ENABLE(interpolate-volume,
818 [ --disable-interpolate-volume
819 Disable interpolation of volume modulation
820 (default=on). With this enabled, the volume changes
821 generated by for example the envelope generator
822 will be smoother, minimizing the risk for audio
823 clicks. Disable it to reduce CPU usage.],
824 [config_interpolate_volume="no"],
825 [config_interpolate_volume="yes"]
826 )
827 if test "$config_interpolate_volume" = "yes"; then
828 AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
829 fi
830
831
832 ###########################################################################
833 # Automatic Benchmarks (to detect the best algorithms for the system)
834
835 AC_LANG_SAVE
836
837 if test "$config_signed_triang_algo" = "benchmark"; then
838 echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
839 AC_LANG_CPLUSPLUS
840 AC_TRY_RUN([
841 #define SIGNED 1
842 #define SILENT 1
843 #include "${srcdir}/benchmarks/triang.cpp"
844 ],
845 triang_signed=0,
846 triang_signed=$?,
847 triang_signed=0
848 )
849 if test "$triang_signed" = "2"; then
850 config_signed_triang_algo="intmath"
851 echo "integer math"
852 elif test "$triang_signed" = "3"; then
853 config_signed_triang_algo="diharmonic"
854 echo "di harmonics"
855 elif test "$triang_signed" = "5"; then
856 config_signed_triang_algo="intmathabs"
857 echo "integer math using abs()"
858 else
859 echo "Benchmark of signed triangular wave algorithms failed!"
860 echo "Maybe you are doing cross compilation? In that case you have to select"
861 echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
862 echo "Call './configure --help' for further information or read configure.in."
863 exit -1;
864 fi
865 else
866 case "$config_signed_triang_algo" in
867 intmath)
868 triang_signed=2 ;;
869 diharmonic)
870 triang_signed=3 ;;
871 intmathabs)
872 triang_signed=5 ;;
873 esac
874 fi
875 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
876
877 if test "$config_unsigned_triang_algo" = "benchmark"; then
878 echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
879 AC_LANG_CPLUSPLUS
880 AC_TRY_RUN([
881 #define SIGNED 0
882 #define SILENT 1
883 #include "${srcdir}/benchmarks/triang.cpp"
884 ],
885 triang_unsigned=0,
886 triang_unsigned=$?,
887 triang_unsigned=0
888 )
889 if test "$triang_unsigned" = "2"; then
890 config_unsigned_triang_algo="intmath"
891 echo "integer math"
892 elif test "$triang_unsigned" = "3"; then
893 config_unsigned_triang_algo="diharmonic"
894 echo "di harmonics"
895 elif test "$triang_unsigned" = "5"; then
896 config_unsigned_triang_algo="intmathabs"
897 echo "integer math using abs()"
898 else
899 echo "Benchmark of unsigned triangular wave algorithms failed!"
900 echo "Maybe you are doing cross compilation? In that case you have to select"
901 echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
902 echo "Call './configure --help' for further information or read configure.in."
903 exit -1;
904 fi
905 else
906 case "$config_unsigned_triang_algo" in
907 intmath)
908 triang_unsigned=2 ;;
909 diharmonic)
910 triang_unsigned=3 ;;
911 intmathabs)
912 triang_unsigned=5 ;;
913 esac
914 fi
915 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
916
917 AC_LANG_RESTORE
918
919
920 ###########################################################################
921 # Create Build Files
922
923 AM_CONFIG_HEADER(config.h)
924 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
925
926 AC_LANG_CPLUSPLUS
927 AC_PROG_CXX
928
929 # some gcc 4.0 versions need -msse for SSE register allocations
930 if test "$config_asm" = "yes"; then
931 if test "$def_arch_x86" = 1; then
932 CXXFLAGS="$CXXFLAGS -msse"
933 fi
934 fi
935
936 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
937 # this, the dlfcn.h check in am_prog_libtool may fail.
938 AC_CHECK_HEADER(stdlib.h)
939
940 AC_OUTPUT( \
941 Makefile \
942 man/Makefile \
943 man/linuxsampler.1 \
944 src/Makefile \
945 src/db/Makefile \
946 src/network/Makefile \
947 src/engines/Makefile \
948 src/engines/gig/Makefile \
949 src/engines/common/Makefile \
950 src/common/Makefile src/lib/Makefile \
951 src/lib/fileloader/Makefile \
952 src/lib/fileloader/libgig/Makefile \
953 src/testcases/Makefile \
954 src/drivers/Makefile \
955 src/drivers/audio/Makefile \
956 src/drivers/midi/Makefile \
957 linuxsampler.spec \
958 debian/Makefile \
959 Artwork/Makefile \
960 scripts/Makefile \
961 osx/Makefile \
962 osx/LinuxSampler.xcode/Makefile \
963 Documentation/Makefile \
964 Documentation/Engines/Makefile \
965 Documentation/Engines/gig/Makefile \
966 linuxsampler.pc \
967 Doxyfile \
968 )
969
970
971 ###########################################################################
972 # Output All Configuration Options
973
974 echo ""
975 echo "#####################################################################"
976 echo "# LinuxSampler Configuration #"
977 echo "#-------------------------------------------------------------------#"
978 echo "# Assembly Optimizations: ${config_asm}"
979 echo "# Development Mode: ${config_dev_mode}"
980 echo "# Debug Level: ${config_debug_level}"
981 echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
982 echo "# Preload Samples: ${config_preload_samples}"
983 echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
984 echo "# Maximum Events: ${config_max_events}"
985 echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
986 echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
987 echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
988 echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
989 echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
990 echo "# Stream Size: ${config_stream_size}"
991 echo "# Maximum Disk Streams: ${config_max_streams}"
992 echo "# Maximum Voices: ${config_max_voices}"
993 echo "# Default Subfragment Size: ${config_subfragment_size}"
994 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
995 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
996 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
997 echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
998 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
999 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1000 echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1001 echo "# Default Portamento Time: ${config_portamento_time_default} s"
1002 echo "# Force Filter Usage: ${config_force_filter}"
1003 echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1004 echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1005 echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1006 echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1007 echo "# Override Filter Type: ${config_override_filter_type}"
1008 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1009 echo "# Process Muted Channels: ${config_process_muted_channels}"
1010 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1011 echo "# Interpolate Volume: ${config_interpolate_volume}"
1012 echo "# Instruments database support: ${instruments_db_support}"
1013 echo "#-------------------------------------------------------------------#"
1014 echo "# Read './configure --help' or file 'configure.in' for details. #"
1015 echo "#####################################################################"
1016 echo ""
1017 echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1018 echo ""

  ViewVC Help
Powered by ViewVC