/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Contents of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1525 - (show annotations) (download)
Sun Nov 25 17:47:46 2007 UTC (16 years, 3 months ago) by schoenebeck
Original Path: linuxsampler/trunk/configure.in
File size: 48567 byte(s)
* LSCP: added new LSCP commands: "GET FILE INSTRUMENTS <file>",
  "LIST FILE INSTRUMENTS <file>" and
  "GET FILE INSTRUMENT INFO <file> <index>" for retrieving informations
  about an arbitrary instrument file on the system where the sampler is
  running on (LSCP specs yet to be updated!)
* bumped version to 0.5.0.1cvs
* bumped LSCP compliance to LSCP version 1.3

1 AC_INIT(configure.in)
2
3 #------------------------------------------------------------------------------------
4 # LinuxSampler's / liblinuxsampler's "official" release version:
5
6 LINUXSAMPLER_RELEASE_MAJOR=0
7 LINUXSAMPLER_RELEASE_MINOR=5
8 LINUXSAMPLER_RELEASE_BUILD=0.1cvs
9
10 #------------------------------------------------------------------------------------
11 # The following is the libtool / shared library version. This doesn't have to
12 # do anything with the release version. It MUST conform to the following rules:
13 #
14 # 1. Start with version information of `0:0:0' for each libtool library.
15 # 2. Update the version information only immediately before a public release of
16 # your software. More frequent updates are unnecessary, and only guarantee
17 # that the current interface number gets larger faster.
18 # 3. If the library source code has changed at all since the last update, then
19 # increment revision (`c:r:a' becomes `c:r+1:a').
20 # 4. If any interfaces have been added, removed, or changed since the last update,
21 # increment current, and set revision to 0.
22 # 5. If any interfaces have been added since the last public release, then increment
23 # age.
24 # 6. If any interfaces have been removed since the last public release, then set age
25 # to 0.
26
27 LIBLINUXSAMPLER_LT_CURRENT=1
28 LIBLINUXSAMPLER_LT_REVISION=0
29 LIBLINUXSAMPLER_LT_AGE=0
30 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31
32 #------------------------------------------------------------------------------------
33 # the LSCP specification version this LinuSampler release complies with:
34
35 LSCP_RELEASE_MAJOR=1
36 LSCP_RELEASE_MINOR=3
37
38 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40
41 AM_PROG_LIBTOOL
42
43 AC_SUBST(SHLIB_VERSION_ARG)
44 AC_SUBST(SHARED_VERSION_INFO)
45
46 AC_C_BIGENDIAN
47 AC_CANONICAL_SYSTEM
48
49 AC_SUBST(target)
50 AC_SUBST(target_alias)
51 AC_SUBST(target_cpu)
52 AC_SUBST(target_os)
53 AC_SUBST(target_vendor)
54
55
56 ###########################################################################
57 # General Checks
58
59 AC_MSG_CHECKING([whether x86 architecture])
60 def_arch_x86=0
61 case $target_cpu in
62 "i386" | "i486" | "i586" | "i686" | "i786")
63 echo "yes"
64 def_arch_x86=1;;
65 *)
66 echo "no";;
67 esac
68 AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
69
70 # determine the right gcc switch for CPU specific optimizations
71 # (only if the user did not provide one)
72 CXX_CPU_SWITCH=
73 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
74 if test "$def_arch_x86" = 1; then
75 CXX_CPU_SWITCH="-march=$target_cpu"
76 elif test "$target_cpu" = "ppc"; then
77 CXX_CPU_SWITCH="-arch=$target_cpu"
78 fi
79 fi
80 AC_SUBST([CXX_CPU_SWITCH])
81
82 # check if we're on MS Windows
83 AC_CHECK_HEADERS(
84 mmsystem.h,
85 have_windows=1,
86 have_windows=0
87 )
88 AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
89
90 AC_MSG_CHECKING([whether UNIX98 compatible])
91 AC_LANG_SAVE
92 AC_LANG_C
93 AC_TRY_RUN([
94 #ifndef _GNU_SOURCE
95 #define _GNU_SOURCE 1
96 #endif
97 #include <features.h>
98 void main(void) {
99 #if _XOPEN_SOURCE >= 500
100 exit(0); /* UNIX98 compatible */
101 #else
102 exit(-1); /* not UNIX98 compatible */
103 #endif
104 }
105 ],
106 have_unix98="yes",
107 have_unix98="no",
108 have_unix98="no"
109 )
110 AC_LANG_RESTORE
111 AC_MSG_RESULT([$have_unix98])
112 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
113 if test "x$HAVE_UNIX98" = "x"; then
114 echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
115 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
116 echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
117 echo "have a UNIX98 compatible system."
118 exit -1;
119 fi
120 fi
121
122 # check for <features.h>
123 AC_CHECK_HEADERS(features.h)
124
125 # test for POSIX thread library
126 m4_ifdef([m4_include(m4/pthread.m4)],,
127 [sinclude([m4/pthread.m4])])
128 ACX_PTHREAD
129 LIBS="$PTHREAD_LIBS $LIBS"
130 CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
131 CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
132 CC="$PTHREAD_CC"
133
134 # check for a bug in NPTL-enabled glibc
135 # (see Gentoo bug report #194076)
136 AC_ARG_ENABLE(nptl-bug-check,
137 [ --disable-nptl-bug-check
138 Disable check for a bug in certain NPTL-enabled
139 glibc versions that caused crashs.],
140 [config_check_nptl_bug="$enableval"],
141 [config_check_nptl_bug="yes"]
142 )
143 if test "$config_check_nptl_bug" = "yes"; then
144 m4_ifdef([m4_include(m4/nptl_bug.m4)],,
145 [sinclude([m4/nptl_bug.m4])])
146 ACX_NPTL_GLIBC_BUG([
147 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
148 echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
149 echo "probably crash due to this. Please report us the system you are"
150 echo "using and/or file a bug report to the bug tracking system of"
151 echo "your distribution."
152 echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
153 echo "well, you can try to circumvent this problem for now by setting"
154 echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
155 echo "should cause this test to pass."
156 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
157 AC_MSG_ERROR([possibly NPTL glibc bug detected])
158 ])
159 else
160 echo "NPTL glibc bug check disabled"
161 fi
162
163
164
165 ###########################################################################
166 # Checks for available audio and MIDI systems / drivers
167 # (we throw an error if there's not at least one system for audio output and MIDI input available)
168
169 have_midi_input_driver="false"
170 have_audio_output_driver="false"
171
172 # ALSA
173 AC_ARG_ENABLE(alsa-driver,
174 [ --disable-alsa-driver
175 Disable support for the Advanced Linux Sound
176 Architecture (ALSA).],
177 [config_alsa_driver="$enableval"],
178 [config_alsa_driver="yes"]
179 )
180 have_alsa=0
181 if test "$config_alsa_driver" = "yes"; then
182 AC_CHECK_HEADER(alsa/asoundlib.h,
183 AC_CHECK_LIB(asound, main,
184 have_alsa=1
185 ,
186 have_alsa=0
187 )
188 ,
189 have_alsa=0
190 )
191 if test "$have_alsa" = "1"; then
192 have_midi_input_driver="true"
193 have_audio_output_driver="true";
194 fi
195
196 echo -n "checking Alsa version... "
197 AC_LANG_SAVE
198 AC_LANG_C
199 AC_TRY_RUN([
200 #include <alsa/asoundlib.h>
201 void main(void) {
202 /* ensure backward compatibility */
203 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
204 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
205 #endif
206 exit(SND_LIB_MAJOR);
207 }
208 ],
209 alsa_major=0,
210 alsa_major=$?,
211 alsa_major=0
212 )
213 AC_TRY_RUN([
214 #include <alsa/asoundlib.h>
215 void main(void) {
216 /* ensure backward compatibility */
217 #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
218 #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
219 #endif
220 exit(SND_LIB_MINOR);
221 }
222 ],
223 alsa_minor=0,
224 alsa_minor=$?,
225 alsa_minor=0
226 )
227 AC_TRY_RUN([
228 #include <alsa/asoundlib.h>
229 void main(void) {
230 /* ensure backward compatibility */
231 #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
232 #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
233 #endif
234 exit(SND_LIB_SUBMINOR);
235 }
236 ],
237 alsa_subminor=0,
238 alsa_subminor=$?,
239 alsa_subminor=0
240 )
241 AC_LANG_RESTORE
242 echo "$alsa_major.$alsa_minor.$alsa_subminor";
243 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
244 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
245 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
246 else
247 echo "ALSA support disabled by configure script parameter"
248 fi
249 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
250 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
251
252 # JACK
253 AC_ARG_ENABLE(jack-driver,
254 [ --disable-jack-driver
255 Disable support for the Jack Audio Connection Kit
256 (JACK).],
257 [config_jack_driver="$enableval"],
258 [config_jack_driver="yes"]
259 )
260 have_jack=0
261 if test "$config_jack_driver" = "yes"; then
262 PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
263 if test $have_jack = "1"; then
264 AC_SUBST(JACK_LIBS)
265 AC_SUBST(JACK_CFLAGS)
266 AC_CHECK_LIB(jack, jack_client_name_size, [AC_DEFINE(HAVE_JACK_CLIENT_NAME_SIZE, 1, [Define to 1 if you have the `jack_client_name_size' function.])], , $JACK_LIBS)
267 have_audio_output_driver="true";
268 fi
269 else
270 echo "JACK support disabled by configure script parameter"
271 fi
272 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
273 AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
274
275 # ARTS
276 AC_ARG_ENABLE(arts-driver,
277 [ --disable-arts-driver
278 Disable support for the Analogue Realtime System
279 (aRts).],
280 [config_arts_driver="$enableval"],
281 [config_arts_driver="yes"]
282 )
283 have_arts=0
284 if test "$config_arts_driver" = "yes"; then
285 m4_ifdef([m4_include(m4/arts.m4)],,
286 [sinclude([m4/arts.m4])])
287 AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
288 if test "$have_arts" = "1"; then
289 have_audio_output_driver="true"
290 fi
291 else
292 echo "ARTS support disabled by configure script parameter"
293 fi
294 AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
295 AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
296
297 # ASIO AUDIO (Win32)
298 AC_ARG_ENABLE(asiosdk-dir,
299 [ --enable-asiosdk-dir
300 Directory where the ASIO SDK is located, this automatically
301 enables the compilation of the ASIO audio output driver.],
302 [config_asiosdk_dir="${enableval}"],
303 [config_asiosdk_dir="."]
304 )
305 AC_SUBST(config_asiosdk_dir)
306
307 AC_ARG_ENABLE(asio-driver,
308 [ --disable-asio-driver
309 Disable support for the Windows ASIO driver.],
310 [config_asio_driver="$enableval"],
311 [config_asio_driver="yes"]
312 )
313 have_asio=0
314 ASIOSDK_BASEDIR=
315 if test "$config_asio_driver" = "yes"; then
316 asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
317 echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
318 if test -e $asiosdk_headerfile ; then
319 echo yes
320 have_asio=1
321 ASIOSDK_BASEDIR="$config_asiosdk_dir"
322 else
323 echo no
324 have_asio=0
325 fi
326 if test "$have_asio" = "1"; then
327 have_audio_output_driver="true"
328 fi
329 else
330 echo "Windows ASIO support disabled by configure script parameter"
331 fi
332 AC_SUBST(ASIOSDK_BASEDIR)
333 AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
334 AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
335
336 # MidiShare (Linux, OS X, Windows)
337 AC_ARG_ENABLE(midishare-driver,
338 [ --disable-midishare-driver
339 Disable support for the MidiShare system.],
340 [config_midishare_driver="$enableval"],
341 [config_midishare_driver="yes"]
342 )
343 have_midishare=0
344 if test "$config_midishare_driver" = "yes"; then
345 AC_CHECK_HEADER(MidiShare.h,
346 AC_CHECK_LIB(MidiShare, MidiCountEvs,
347 have_midishare=1,
348 have_midishare=0
349 )
350 ,
351 have_midishare=0
352 )
353 if test "$have_midishare" = "1"; then
354 have_midi_input_driver="true"
355 fi
356 else
357 echo "MidiShare support disabled by configure script parameter"
358 fi
359 AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
360 AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
361
362 # CoreMIDI (OS X)
363 AC_ARG_ENABLE(coremidi-driver,
364 [ --disable-coremidi-driver
365 Disable support for the Apple CoreMIDI system.],
366 [config_coremidi_driver="$enableval"],
367 [config_coremidi_driver="yes"]
368 )
369 have_coremidi=0
370 if test "$config_coremidi_driver" = "yes"; then
371 AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
372 have_coremidi=1,
373 have_coremidi=0
374 )
375 if test "$have_coremidi" = "1"; then
376 have_midi_input_driver="true"
377 fi
378 else
379 echo "CoreMIDI support disabled by configure script parameter"
380 fi
381 AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
382 AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
383
384 # MME MIDI (Win32)
385 AC_ARG_ENABLE(mmemidi-driver,
386 [ --disable-mmemidi-driver
387 Disable support for the Windows MME MIDI system.],
388 [config_mmemidi_driver="$enableval"],
389 [config_mmemidi_driver="yes"]
390 )
391 have_mmemidi=0
392 if test "$config_mmemidi_driver" = "yes"; then
393 AC_CHECK_HEADERS(mmsystem.h,
394 have_mmemidi=1,
395 have_mmemidi=0
396 )
397 if test "$have_mmemidi" = "1"; then
398 have_midi_input_driver="true"
399 fi
400 else
401 echo "MME MIDI support disabled by configure script parameter"
402 fi
403 AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
404 AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
405
406 # have we found at least one MIDI input and one audio output driver ?
407 if test "$have_midi_input_driver" = "false"; then
408 echo "No supported MIDI input system found!"
409 echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
410 echo "ALSA, MIDIShare, CoreMIDI."
411 echo "If you think you have one of those available on your system, make sure you"
412 echo "also have the respective development (header) files installed."
413 exit -1;
414 fi
415 if test "$have_audio_output_driver" = "false"; then
416 echo "No supported audio output system found!"
417 echo "Sorry, LinuxSampler only supports ALSA, JACK and ARTS as audio output"
418 echo "driver at the moment!"
419 exit -1;
420 fi
421
422
423
424 ###########################################################################
425 # Checks for various DLL libraries
426
427 # Check presence of libgig
428 libgig_version="3.2.0"
429 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
430 if test "$HAVE_GIG" = "false"; then
431 echo "Required libgig version not found!"
432 echo "You need to have libgig version ${libgig_version} installed!"
433 exit -1;
434 else
435 echo "yes, found libgig $libgig_version"
436 fi
437 AC_SUBST(GIG_CFLAGS)
438 AC_SUBST(GIG_LIBS)
439
440 # Instruments DB feature (requires SQLite 3.3)
441 AC_ARG_ENABLE(instruments-db,
442 [ --disable-instruments-db
443 Disable compilation of the sampler's instruments
444 database feature. You need to have SQLite 3.3
445 or younger installed for this feature.],
446 [config_instruments_db="$enableval"],
447 [config_instruments_db="yes"]
448 )
449 HAVE_SQLITE3=0;
450 if test "$config_instruments_db" = "yes"; then
451 # Check presence of sqlite3
452 sqlite_version="3.3"
453 PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
454 AC_SUBST(SQLITE3_LIBS)
455 AC_SUBST(SQLITE3_CFLAGS)
456 if test $HAVE_SQLITE3 = false; then
457 HAVE_SQLITE3=0
458 config_instruments_db="no"
459 echo "*** Required sqlite version not found!"
460 echo "*** You need to have sqlite version ${sqlite_version} or higher"
461 echo "*** for instruments database support to be enabled."
462 echo "*** Support for instruments DB will be disabled!"
463 else
464 HAVE_SQLITE3=1
465 fi
466 else
467 echo "Instruments DB feature disabled by configure script parameter"
468 fi
469 AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
470 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
471
472
473
474 ###########################################################################
475 # Handle Configuration Options
476
477 # TODO: should we use AC_ARG_VAR(variable, description) instead?
478
479 AC_ARG_ENABLE(asm,
480 [ --disable-asm
481 Enable hand-crafted assembly optimizations
482 (default=on). LinuxSampler provides CPU specific
483 assembly optimizations. This is currently limited
484 to just enter a fast (denormal) FPU mode on x86
485 platforms. There are currently no synthesis core
486 assembly optimizations anymore since LS 0.4.0],
487 [config_asm="$enableval"],
488 [config_asm="yes"]
489 )
490 if test "$config_asm" = "yes"; then
491 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
492 fi
493
494 AC_ARG_ENABLE(dev-mode,
495 [ --enable-dev-mode
496 Enable development mode (default=off). In that mode
497 we do some extra sanity checks here and there.
498 This helps to spot possible problems, but reduces
499 efficiency a bit],
500 [config_dev_mode="$enableval"],
501 [config_dev_mode="no"]
502 )
503 if test "$config_dev_mode" = "yes"; then
504 AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
505 fi
506
507 AC_ARG_ENABLE(debug-level,
508 [ --enable-debug-level
509 Specify verbosity of console messages (default=1).
510 The higher the value, the higher will be verbosity.
511 A value of 0 means no console output at all.
512 There's not really an upper limit but the usual
513 level of all messages is currently somewhere less
514 than 10.],
515 [config_debug_level="${enableval}"],
516 [config_debug_level="1"]
517 )
518 AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
519
520 AC_ARG_ENABLE(rt-exceptions,
521 [ --enable-rt-exceptions
522 Enable exceptions in the realtime thread
523 (default=no). If this is enabled, exceptions will
524 be thrown on critical errors in the realtime
525 context as well. Otherwise if disabled
526 segmentation faults will be forced by the
527 application on critical errors.],
528 [config_rt_exceptions="$enableval"],
529 [config_rt_exceptions="no"]
530 )
531 if test "$config_rt_exceptions" = "yes"; then
532 AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
533 fi
534
535 AC_ARG_ENABLE(preload-samples,
536 [ --enable-preload-samples
537 Due to seeking and latency issues with hard drives
538 we have to cache a small part of samples' head in
539 RAM (default=32768). The higher this value the
540 more memory will be occupied for each sample, but
541 the safer this will be in regards of possible
542 droputs. A 'good' value depends on the running
543 system and usage dependant factors.],
544 [config_preload_samples="${enableval}"],
545 [config_preload_samples="32768"]
546 )
547 AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
548
549 AC_ARG_ENABLE(max-pitch,
550 [ --enable-max-pitch
551 Specify the maximum allowed pitch value in octaves
552 (default=4). To lower memory usage you might want
553 set a smaller value.],
554 [config_max_pitch="${enableval}"],
555 [config_max_pitch="4"]
556 )
557 AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
558
559 AC_ARG_ENABLE(max-events,
560 [ --enable-max-events
561 Specify the maximum allowed amount of events to be
562 processed per fragment (default=1024).],
563 [config_max_events="${enableval}"],
564 [config_max_events="1024"]
565 )
566 AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
567
568 AC_ARG_ENABLE(eg-bottom,
569 [ --enable-eg-bottom
570 Bottom limit of envelope generators
571 (default=0.001). Certain kinds of curve types like
572 exponential curves converge against 0 but never
573 reach 0. So we have to define a certain low value
574 after which we should consider all smaller values
575 to be 'almost zero'. The smaller this value, the
576 longer will voices survive in EG's release stage
577 and thus waste voices. If this value is too high
578 will cause click sounds though.],
579 [config_eg_bottom="${enableval}"],
580 [config_eg_bottom="0.001"]
581 )
582 AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
583
584 AC_ARG_ENABLE(eg-min-release-time,
585 [ --enable-eg-min-release-time
586 Specify the lowest allowed release time in seconds
587 (default=0.0025). This value will also be used to
588 ramp down voices on voice stealing. This value
589 should always be less than the period time of the
590 used audio driver, as in case of voice stealing
591 the killed voice needs to be completely ramped
592 down in the same fragment.],
593 [config_eg_min_release_time="${enableval}"],
594 [config_eg_min_release_time="0.0025"]
595 )
596 AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
597
598 AC_ARG_ENABLE(refill-streams,
599 [ --enable-refill-streams
600 Number of streams that should be refilled in each
601 disk thread cycle (default=4).],
602 [config_refill_streams="${enableval}"],
603 [config_refill_streams="4"]
604 )
605 AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
606
607 AC_ARG_ENABLE(stream-min-refill,
608 [ --enable-stream-min-refill
609 Minimum refill size for disk streams (default=1024).
610 The disk thread will go to sleep for a while if no
611 stream had to be refilled more than this value in
612 a disk thread cycle.],
613 [config_stream_min_refill="${enableval}"],
614 [config_stream_min_refill="1024"]
615 )
616 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
617
618 AC_ARG_ENABLE(stream-max-refill,
619 [ --enable-stream-max-refill
620 Maximum refill size for disk streams
621 (default=65536). The disk thread will refill
622 each stream only by a size of this value per
623 disk thread cycle.],
624 [config_stream_max_refill="${enableval}"],
625 [config_stream_max_refill="65536"]
626 )
627 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
628
629 AC_ARG_ENABLE(stream-size,
630 [ --enable-stream-size
631 Size of each stream's ring buffer in sample points
632 (default=262144).],
633 [config_stream_size="${enableval}"],
634 [config_stream_size="262144"]
635 )
636 AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
637
638 AC_ARG_ENABLE(max-streams,
639 [ --enable-max-streams
640 Maximum amount of disk streams (default=90). This
641 value should always be higher than the maximum
642 amount of voices.],
643 [config_max_streams="${enableval}"],
644 [config_max_streams="90"]
645 )
646 AC_DEFINE_UNQUOTED(CONFIG_MAX_STREAMS, $config_max_streams, [Define max. streams.])
647
648 AC_ARG_ENABLE(max-voices,
649 [ --enable-max-voices
650 Maximum amount of voices (default=64). This value
651 should always be lower than the maximum amount of
652 disk streams.],
653 [config_max_voices="${enableval}"],
654 [config_max_voices="64"]
655 )
656 AC_DEFINE_UNQUOTED(CONFIG_MAX_VOICES, $config_max_voices, [Define max. voices.])
657
658 AC_ARG_ENABLE(subfragment-size,
659 [ --enable-subfragment-size
660 Every audio fragment will be splitted into
661 subfragments. Where each subfragment renders
662 audio with constant synthesis parameters. This is
663 done for efficiency reasons. This parameter
664 defines the default size of a subfragment in
665 sample points. A large value means less CPU time
666 whereas a low value means better audio quality
667 (default=32).],
668 [config_subfragment_size="${enableval}"],
669 [config_subfragment_size="32"]
670 )
671 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
672
673 AC_ARG_ENABLE(global-attenuation-default,
674 [ --enable-global-attenuation-default
675 To prevent clipping all samples will be lowered
676 in amplitude by this given default factor (can
677 be overridden at runtime).
678 (default=0.35)],
679 [config_global_attenuation_default="${enableval}"],
680 [config_global_attenuation_default="0.35"]
681 )
682 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
683
684 AC_ARG_ENABLE(voice-steal-algo,
685 [ --enable-voice-steal-algo
686 Voice stealing algorithm to be used. Currently
687 available options:
688 none:
689 Disable voice stealing completely.
690 oldestvoiceonkey (default):
691 Try to kill a voice on the same key first,
692 if no success, proceed with the oldest key.
693 oldestkey:
694 Try to kill a voice from the oldest active
695 key.],
696 [ if test ! "(" "${enableval}" = "none" \
697 -o "${enableval}" = "oldestvoiceonkey" \
698 -o "${enableval}" = "oldestkey" ")" ; then
699 AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
700 else
701 config_voice_steal_algo="${enableval}"
702 fi
703 ],
704 [config_voice_steal_algo="oldestvoiceonkey"]
705 )
706 AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
707
708 AC_ARG_ENABLE(sysex-buffer-size,
709 [ --enable-sysex-buffer-size
710 System Exclusive Message buffer size in kB
711 (default=2048).],
712 [config_sysex_buffer_size="${enableval}"],
713 [config_sysex_buffer_size="2048"]
714 )
715 AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
716
717 AC_ARG_ENABLE(force-filter,
718 [ --enable-force-filter
719 If enabled will force filter to be used even if
720 no usage was define in instrument patch files.
721 (default=no).],
722 [config_force_filter="$enableval"],
723 [config_force_filter="no"]
724 )
725 if test "$config_force_filter" = "yes"; then
726 AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
727 fi
728
729 AC_ARG_ENABLE(filter-cutoff-min,
730 [ --enable-filter-cutoff-min
731 Minimum filter cutoff frequency in Hz
732 (default=100.0).],
733 [config_filter_cutoff_min="${enableval}"],
734 [config_filter_cutoff_min="100.0"]
735 )
736 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
737
738 AC_ARG_ENABLE(filter-cutoff-max,
739 [ --enable-filter-cutoff-max
740 Maximum filter cutoff frequency in Hz
741 (default=10000.0).],
742 [config_filter_cutoff_max="${enableval}"],
743 [config_filter_cutoff_max="10000.0"]
744 )
745 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
746
747 AC_ARG_ENABLE(override-cutoff-ctrl,
748 [ --enable-override-cutoff-ctrl
749 Override filter cutoff MIDI controller (default=no).
750 Note: you have to define the MIDI controller number
751 here, it's not a boolean parameter type! If this
752 option is used, controller number given by
753 instrument patch will be ignored and instead this
754 supplied value will be used.],
755 [config_override_cutoff_ctrl="${enableval}"],
756 [config_override_cutoff_ctrl="no"]
757 )
758 if test ! "$config_override_cutoff_ctrl" = "no"; then
759 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
760 fi
761
762 AC_ARG_ENABLE(override-resonance-ctrl,
763 [ --enable-override-resonance-ctrl
764 Override filter resonance MIDI controller
765 (default=no). Note: you have to define the MIDI
766 controller number here, it's not a boolean
767 parameter type! If this option is used, controller
768 number given by instrument patch will be ignored
769 and instead this supplied value will be used.],
770 [config_override_resonance_ctrl="${enableval}"],
771 [config_override_resonance_ctrl="no"]
772 )
773 if test ! "$config_override_resonance_ctrl" = "no"; then
774 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
775 fi
776
777 AC_ARG_ENABLE(override-filter-type,
778 [ --enable-override-filter-type
779 Override filter type (default=no). Options:
780 hp: for highpass
781 bp: for bandpass
782 br: for bandreject
783 lp: for lowpass
784 lpt: for lowpass turbo],
785 [ if test "${enableval}" = "hp" ; then
786 config_override_filter_type="::gig::vcf_type_highpass"
787 elif test "${enableval}" = "bp" ; then
788 config_override_filter_type="::gig::vcf_type_bandpass"
789 elif test "${enableval}" = "br" ; then
790 config_override_filter_type="::gig::vcf_type_bandreject"
791 elif test "${enableval}" = "lp" ; then
792 config_override_filter_type="::gig::vcf_type_lowpass"
793 elif test "${enableval}" = "lpt" ; then
794 config_override_filter_type="::gig::vcf_type_lowpassturbo"
795 elif test ! "${enableval}" = "no"; then
796 AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
797 fi
798 ],
799 [config_override_filter_type="no"]
800 )
801 if test ! "$config_override_filter_type" = "no"; then
802 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
803 fi
804
805 AC_ARG_ENABLE(gs-checksum,
806 [ --enable-gs-checksum
807 Enable Roland General Synth SysEx checksum check
808 (default=no). If this is enabled, all GS SysEx
809 messages which do not provide a correct checksum
810 will be ignored. This is disabled by default as
811 not all devices honor GS checksums.],
812 [config_assert_gs_sysex_checksum="$enableval"],
813 [config_assert_gs_sysex_checksum="no"]
814 )
815 if test "config_assert_gs_sysex_checksum" = "yes"; then
816 AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
817 fi
818
819 AC_ARG_ENABLE(portamento-time-min,
820 [ --enable-portamento-time-min
821 Minimum Portamento time in seconds
822 (default=0.1).],
823 [config_portamento_time_min="${enableval}"],
824 [config_portamento_time_min="0.1"]
825 )
826 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
827
828 AC_ARG_ENABLE(portamento-time-max,
829 [ --enable-portamento-time-max
830 Maximum Portamento time in seconds
831 (default=32).],
832 [config_portamento_time_max="${enableval}"],
833 [config_portamento_time_max="32"]
834 )
835 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
836
837 AC_ARG_ENABLE(portamento-time-default,
838 [ --enable-portamento-time-default
839 Default Portamento time in seconds
840 (default=1).],
841 [config_portamento_time_default="${enableval}"],
842 [config_portamento_time_default="1"]
843 )
844 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
845
846 AC_ARG_ENABLE(signed-triang-algo,
847 [ --enable-signed-triang-algo
848 Signed triangular wave algorithm to be used (e.g. for LFOs).
849 Currently available options:
850 intmath:
851 Uses integer math without any branch will then be
852 converted to floating point value for each sample point.
853 This int->float conversion might hurt on some systems.
854 intmathabs:
855 Similar to intmath but uses abs() function.
856 Depending on compiler and platrofm this could
857 perform better than integer math as it avoids
858 an extra integer multiply instruction.
859 diharmonic:
860 The triangular wave will be approximated by adding two
861 sinusoidials. This solution might especially hurt on
862 systems with weak floating point unit.
863 benchmark (default):
864 This is not an algorithm. Use this option if the
865 appropriate algorithm should be automatically
866 chosen by the configure script by performing a
867 benchmark between the algorithms mentioned above.
868 This will NOT work for cross compilation!],
869 [ if test ! "(" "${enableval}" = "intmath" \
870 -o "${enableval}" = "intmathabs" \
871 -o "${enableval}" = "diharmonic" ")" ; then
872 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
873 else
874 config_signed_triang_algo="${enableval}"
875 fi
876 ],
877 [config_signed_triang_algo="benchmark"]
878 )
879
880 AC_ARG_ENABLE(unsigned-triang-algo,
881 [ --enable-unsigned-triang-algo
882 Unsigned triangular wave algorithm to be used (e.g. for LFOs).
883 Currently available options:
884 intmath:
885 Uses integer math without any branch will then be
886 converted to floating point value for each sample point.
887 This int->float conversion might hurt on some systems.
888 intmathabs:
889 Similar to intmath but uses abs() function.
890 Depending on compiler and platrofm this could
891 perform better than integer math as it avoids
892 an extra integer multiply instruction.
893 diharmonic:
894 The triangular wave will be approximated by adding two
895 sinusoidials. This solution might especially hurt on
896 systems with weak floating point unit.
897 benchmark (default):
898 This is not an algorithm. Use this option if the
899 appropriate algorithm should be automatically
900 chosen by the configure script by performing a
901 benchmark between the algorithms mentioned above.
902 This will NOT work for cross compilation!],
903 [ if test ! "(" "${enableval}" = "intmath" \
904 -o "${enableval}" = "intmathabs" \
905 -o "${enableval}" = "diharmonic" ")" ; then
906 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
907 else
908 config_unsigned_triang_algo="${enableval}"
909 fi
910 ],
911 [config_unsigned_triang_algo="benchmark"]
912 )
913
914 AC_ARG_ENABLE(process-muted-channels,
915 [ --enable-process-muted-channels
916 Enable processing of muted channels (default=no).
917 In that mode all MIDI events in the muted channels
918 will be processed. This will provide information
919 about the active voices in the muted channels and
920 will not discard notes, triggered in mute mode,
921 when the channel is unmuted. But also will reduce
922 the efficiency.],
923 [config_process_muted_channels="$enableval"],
924 [config_process_muted_channels="no"]
925 )
926 if test "$config_process_muted_channels" = "yes"; then
927 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
928 fi
929
930 AC_ARG_ENABLE(process-all-notes-off,
931 [ --disable-process-all-notes-off
932 Disable interpretation of All-Notes-Off MIDI
933 messages (default=on). By default LS will release
934 all voices whenever it receives an All-Notes-Off
935 MIDI message. You can disable this behavior, so
936 that LS simply ignores such messages.],
937 [config_process_all_notes_off="$enableval"],
938 [config_process_all_notes_off="yes"]
939 )
940 if test "$config_process_all_notes_off" = "yes"; then
941 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
942 fi
943
944 AC_ARG_ENABLE(interpolate-volume,
945 [ --disable-interpolate-volume
946 Disable interpolation of volume modulation
947 (default=on). With this enabled, the volume changes
948 generated by for example the envelope generator
949 will be smoother, minimizing the risk for audio
950 clicks. Disable it to reduce CPU usage.],
951 [config_interpolate_volume="$enableval"],
952 [config_interpolate_volume="yes"]
953 )
954 if test "$config_interpolate_volume" = "yes"; then
955 AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
956 fi
957
958 AC_ARG_ENABLE(plugin-dir,
959 [ --enable-plugin-dir
960 Directory where the sampler shall look for potential plugins,
961 that is 3rd party shared libraries that should be loaded by
962 the sampler on startup. By default the sampler will search
963 for plugins in the subdirectory "plugins" below its own
964 library directory.
965 (i.e. /usr/local/lib/linuxsampler/plugins)],
966 [config_plugin_dir="${enableval}"],
967 [config_plugin_dir="${libdir}/linuxsampler/plugins"]
968 )
969 AC_SUBST(config_plugin_dir)
970
971 AC_ARG_ENABLE(default-instruments-db-location,
972 [ --enable-default-instruments-db-location
973 Only when instruments DB feature is enabled: file name
974 which shall be taken as default location of the
975 instruments DB file. This location can still be
976 overridden at runtime with a command line switch.
977 (default: /var/lib/linuxsampler/instruments.db)],
978 [config_default_instruments_db_file="${enableval}"],
979 [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
980 )
981 AC_DEFINE_UNQUOTED(
982 CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
983 "$config_default_instruments_db_file",
984 [Only when instruments DB feature is enabled: default location of the DB file.]
985 )
986 AC_SUBST(config_default_instruments_db_file)
987
988
989 ###########################################################################
990 # Automatic Benchmarks (to detect the best algorithms for the system)
991
992 AC_LANG_SAVE
993
994 if test "$config_signed_triang_algo" = "benchmark"; then
995 echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
996 AC_LANG_CPLUSPLUS
997 AC_TRY_RUN([
998 #define SIGNED 1
999 #define SILENT 1
1000 #include "${srcdir}/benchmarks/triang.cpp"
1001 ],
1002 triang_signed=0,
1003 triang_signed=$?,
1004 triang_signed=0
1005 )
1006 if test "$triang_signed" = "2"; then
1007 config_signed_triang_algo="intmath"
1008 echo "integer math"
1009 elif test "$triang_signed" = "3"; then
1010 config_signed_triang_algo="diharmonic"
1011 echo "di harmonics"
1012 elif test "$triang_signed" = "5"; then
1013 config_signed_triang_algo="intmathabs"
1014 echo "integer math using abs()"
1015 else
1016 echo "Benchmark of signed triangular wave algorithms failed!"
1017 echo "Maybe you are doing cross compilation? In that case you have to select"
1018 echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1019 echo "Call './configure --help' for further information or read configure.in."
1020 exit -1;
1021 fi
1022 else
1023 case "$config_signed_triang_algo" in
1024 intmath)
1025 triang_signed=2 ;;
1026 diharmonic)
1027 triang_signed=3 ;;
1028 intmathabs)
1029 triang_signed=5 ;;
1030 esac
1031 fi
1032 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1033
1034 if test "$config_unsigned_triang_algo" = "benchmark"; then
1035 echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1036 AC_LANG_CPLUSPLUS
1037 AC_TRY_RUN([
1038 #define SIGNED 0
1039 #define SILENT 1
1040 #include "${srcdir}/benchmarks/triang.cpp"
1041 ],
1042 triang_unsigned=0,
1043 triang_unsigned=$?,
1044 triang_unsigned=0
1045 )
1046 if test "$triang_unsigned" = "2"; then
1047 config_unsigned_triang_algo="intmath"
1048 echo "integer math"
1049 elif test "$triang_unsigned" = "3"; then
1050 config_unsigned_triang_algo="diharmonic"
1051 echo "di harmonics"
1052 elif test "$triang_unsigned" = "5"; then
1053 config_unsigned_triang_algo="intmathabs"
1054 echo "integer math using abs()"
1055 else
1056 echo "Benchmark of unsigned triangular wave algorithms failed!"
1057 echo "Maybe you are doing cross compilation? In that case you have to select"
1058 echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1059 echo "Call './configure --help' for further information or read configure.in."
1060 exit -1;
1061 fi
1062 else
1063 case "$config_unsigned_triang_algo" in
1064 intmath)
1065 triang_unsigned=2 ;;
1066 diharmonic)
1067 triang_unsigned=3 ;;
1068 intmathabs)
1069 triang_unsigned=5 ;;
1070 esac
1071 fi
1072 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1073
1074 AC_LANG_RESTORE
1075
1076
1077 ###########################################################################
1078 # Create Build Files
1079
1080 AM_CONFIG_HEADER(config.h)
1081 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1082
1083 AC_LANG_CPLUSPLUS
1084 AC_PROG_CXX
1085
1086 # some gcc 4.0 versions need -msse for SSE register allocations
1087 if test "$config_asm" = "yes"; then
1088 if test "$def_arch_x86" = 1; then
1089 CXXFLAGS="$CXXFLAGS -msse"
1090 fi
1091 fi
1092
1093 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1094 # this, the dlfcn.h check in am_prog_libtool may fail.
1095 AC_CHECK_HEADER(stdlib.h)
1096
1097 AC_OUTPUT( \
1098 Makefile \
1099 man/Makefile \
1100 man/linuxsampler.1 \
1101 src/Makefile \
1102 src/db/Makefile \
1103 src/network/Makefile \
1104 src/engines/Makefile \
1105 src/engines/gig/Makefile \
1106 src/engines/common/Makefile \
1107 src/common/Makefile \
1108 src/testcases/Makefile \
1109 src/drivers/Makefile \
1110 src/drivers/audio/Makefile \
1111 src/drivers/midi/Makefile \
1112 src/plugins/Makefile \
1113 linuxsampler.spec \
1114 debian/Makefile \
1115 Artwork/Makefile \
1116 scripts/Makefile \
1117 osx/Makefile \
1118 osx/linuxsampler.xcodeproj/Makefile \
1119 Documentation/Makefile \
1120 Documentation/Engines/Makefile \
1121 Documentation/Engines/gig/Makefile \
1122 linuxsampler.pc \
1123 Doxyfile \
1124 )
1125
1126 # resolve all nested variables in '${config_plugin_dir}'
1127 # (merely for providing a human readable summary below)
1128 while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1129 config_plugin_dir=`eval echo ${config_plugin_dir}`
1130 done
1131
1132
1133 ###########################################################################
1134 # Output All Configuration Options
1135
1136 echo ""
1137 echo "#####################################################################"
1138 echo "# LinuxSampler Configuration #"
1139 echo "#-------------------------------------------------------------------#"
1140 echo "# Assembly Optimizations: ${config_asm}"
1141 echo "# Development Mode: ${config_dev_mode}"
1142 echo "# Debug Level: ${config_debug_level}"
1143 echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1144 echo "# Preload Samples: ${config_preload_samples}"
1145 echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1146 echo "# Maximum Events: ${config_max_events}"
1147 echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1148 echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1149 echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1150 echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1151 echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1152 echo "# Stream Size: ${config_stream_size}"
1153 echo "# Maximum Disk Streams: ${config_max_streams}"
1154 echo "# Maximum Voices: ${config_max_voices}"
1155 echo "# Default Subfragment Size: ${config_subfragment_size}"
1156 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1157 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1158 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1159 echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1160 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1161 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1162 echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1163 echo "# Default Portamento Time: ${config_portamento_time_default} s"
1164 echo "# Force Filter Usage: ${config_force_filter}"
1165 echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1166 echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1167 echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1168 echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1169 echo "# Override Filter Type: ${config_override_filter_type}"
1170 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1171 echo "# Process Muted Channels: ${config_process_muted_channels}"
1172 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1173 echo "# Interpolate Volume: ${config_interpolate_volume}"
1174 echo "# Instruments database support: ${config_instruments_db}"
1175 if test "$config_instruments_db" = "yes"; then
1176 echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1177 fi
1178 echo "# Plugin Path: ${config_plugin_dir}"
1179 echo "#-------------------------------------------------------------------#"
1180 echo "# Read './configure --help' or file 'configure.in' for details. #"
1181 echo "#####################################################################"
1182 echo ""
1183 echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1184 echo ""

  ViewVC Help
Powered by ViewVC