/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Contents of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1639 - (show annotations) (download)
Sat Jan 12 14:13:46 2008 UTC (16 years, 2 months ago) by schoenebeck
Original Path: linuxsampler/trunk/configure.in
File size: 48582 byte(s)
* autoconf bugfix: the PKG_CONFIG variable wasn't initialized properly,
  causing e.g. the libgig test to fail when
  "./configure --disable-jack-driver" was used
  (patch by Alexis Ballier)

1 AC_INIT(configure.in)
2
3 #------------------------------------------------------------------------------------
4 # LinuxSampler's / liblinuxsampler's "official" release version:
5
6 LINUXSAMPLER_RELEASE_MAJOR=0
7 LINUXSAMPLER_RELEASE_MINOR=5
8 LINUXSAMPLER_RELEASE_BUILD=1
9
10 #------------------------------------------------------------------------------------
11 # The following is the libtool / shared library version. This doesn't have to
12 # do anything with the release version. It MUST conform to the following rules:
13 #
14 # 1. Start with version information of `0:0:0' for each libtool library.
15 # 2. Update the version information only immediately before a public release of
16 # your software. More frequent updates are unnecessary, and only guarantee
17 # that the current interface number gets larger faster.
18 # 3. If the library source code has changed at all since the last update, then
19 # increment revision (`c:r:a' becomes `c:r+1:a').
20 # 4. If any interfaces have been added, removed, or changed since the last update,
21 # increment current, and set revision to 0.
22 # 5. If any interfaces have been added since the last public release, then increment
23 # age.
24 # 6. If any interfaces have been removed since the last public release, then set age
25 # to 0.
26
27 LIBLINUXSAMPLER_LT_CURRENT=2
28 LIBLINUXSAMPLER_LT_REVISION=0
29 LIBLINUXSAMPLER_LT_AGE=1
30 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31
32 #------------------------------------------------------------------------------------
33 # the LSCP specification version this LinuSampler release complies with:
34
35 LSCP_RELEASE_MAJOR=1
36 LSCP_RELEASE_MINOR=3
37
38 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40
41 AM_PROG_LIBTOOL
42
43 AC_SUBST(SHLIB_VERSION_ARG)
44 AC_SUBST(SHARED_VERSION_INFO)
45
46 AC_C_BIGENDIAN
47 AC_CANONICAL_SYSTEM
48
49 AC_SUBST(target)
50 AC_SUBST(target_alias)
51 AC_SUBST(target_cpu)
52 AC_SUBST(target_os)
53 AC_SUBST(target_vendor)
54
55 PKG_PROG_PKG_CONFIG
56
57 ###########################################################################
58 # General Checks
59
60 AC_MSG_CHECKING([whether x86 architecture])
61 def_arch_x86=0
62 case $target_cpu in
63 "i386" | "i486" | "i586" | "i686" | "i786")
64 echo "yes"
65 def_arch_x86=1;;
66 *)
67 echo "no";;
68 esac
69 AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
70
71 # determine the right gcc switch for CPU specific optimizations
72 # (only if the user did not provide one)
73 CXX_CPU_SWITCH=
74 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
75 if test "$def_arch_x86" = 1; then
76 CXX_CPU_SWITCH="-march=$target_cpu"
77 elif test "$target_cpu" = "ppc"; then
78 CXX_CPU_SWITCH="-arch=$target_cpu"
79 fi
80 fi
81 AC_SUBST([CXX_CPU_SWITCH])
82
83 # check if we're on MS Windows
84 AC_CHECK_HEADERS(
85 mmsystem.h,
86 have_windows=1,
87 have_windows=0
88 )
89 AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
90
91 AC_MSG_CHECKING([whether UNIX98 compatible])
92 AC_LANG_SAVE
93 AC_LANG_C
94 AC_TRY_RUN([
95 #ifndef _GNU_SOURCE
96 #define _GNU_SOURCE 1
97 #endif
98 #include <features.h>
99 void main(void) {
100 #if _XOPEN_SOURCE >= 500
101 exit(0); /* UNIX98 compatible */
102 #else
103 exit(-1); /* not UNIX98 compatible */
104 #endif
105 }
106 ],
107 have_unix98="yes",
108 have_unix98="no",
109 have_unix98="no"
110 )
111 AC_LANG_RESTORE
112 AC_MSG_RESULT([$have_unix98])
113 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
114 if test "x$HAVE_UNIX98" = "x"; then
115 echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
116 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
117 echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
118 echo "have a UNIX98 compatible system."
119 exit -1;
120 fi
121 fi
122
123 # check for <features.h>
124 AC_CHECK_HEADERS(features.h)
125
126 # test for POSIX thread library
127 m4_ifdef([m4_include(m4/pthread.m4)],,
128 [sinclude([m4/pthread.m4])])
129 ACX_PTHREAD
130 LIBS="$PTHREAD_LIBS $LIBS"
131 CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
132 CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
133 CC="$PTHREAD_CC"
134
135 # check for a bug in NPTL-enabled glibc
136 # (see Gentoo bug report #194076)
137 AC_ARG_ENABLE(nptl-bug-check,
138 [ --disable-nptl-bug-check
139 Disable check for a bug in certain NPTL-enabled
140 glibc versions that caused crashs.],
141 [config_check_nptl_bug="$enableval"],
142 [config_check_nptl_bug="yes"]
143 )
144 if test "$config_check_nptl_bug" = "yes"; then
145 m4_ifdef([m4_include(m4/nptl_bug.m4)],,
146 [sinclude([m4/nptl_bug.m4])])
147 ACX_NPTL_GLIBC_BUG([
148 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
149 echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
150 echo "probably crash due to this. Please report us the system you are"
151 echo "using and/or file a bug report to the bug tracking system of"
152 echo "your distribution."
153 echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
154 echo "well, you can try to circumvent this problem for now by setting"
155 echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
156 echo "should cause this test to pass."
157 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
158 AC_MSG_ERROR([possibly NPTL glibc bug detected])
159 ])
160 else
161 echo "NPTL glibc bug check disabled"
162 fi
163
164
165
166 ###########################################################################
167 # Checks for available audio and MIDI systems / drivers
168 # (we throw an error if there's not at least one system for audio output and MIDI input available)
169
170 have_midi_input_driver="false"
171 have_audio_output_driver="false"
172
173 # ALSA
174 AC_ARG_ENABLE(alsa-driver,
175 [ --disable-alsa-driver
176 Disable support for the Advanced Linux Sound
177 Architecture (ALSA).],
178 [config_alsa_driver="$enableval"],
179 [config_alsa_driver="yes"]
180 )
181 have_alsa=0
182 if test "$config_alsa_driver" = "yes"; then
183 AC_CHECK_HEADER(alsa/asoundlib.h,
184 AC_CHECK_LIB(asound, main,
185 have_alsa=1
186 ,
187 have_alsa=0
188 )
189 ,
190 have_alsa=0
191 )
192 if test "$have_alsa" = "1"; then
193 have_midi_input_driver="true"
194 have_audio_output_driver="true";
195 fi
196
197 echo -n "checking Alsa version... "
198 AC_LANG_SAVE
199 AC_LANG_C
200 AC_TRY_RUN([
201 #include <alsa/asoundlib.h>
202 void main(void) {
203 /* ensure backward compatibility */
204 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
205 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
206 #endif
207 exit(SND_LIB_MAJOR);
208 }
209 ],
210 alsa_major=0,
211 alsa_major=$?,
212 alsa_major=0
213 )
214 AC_TRY_RUN([
215 #include <alsa/asoundlib.h>
216 void main(void) {
217 /* ensure backward compatibility */
218 #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
219 #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
220 #endif
221 exit(SND_LIB_MINOR);
222 }
223 ],
224 alsa_minor=0,
225 alsa_minor=$?,
226 alsa_minor=0
227 )
228 AC_TRY_RUN([
229 #include <alsa/asoundlib.h>
230 void main(void) {
231 /* ensure backward compatibility */
232 #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
233 #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
234 #endif
235 exit(SND_LIB_SUBMINOR);
236 }
237 ],
238 alsa_subminor=0,
239 alsa_subminor=$?,
240 alsa_subminor=0
241 )
242 AC_LANG_RESTORE
243 echo "$alsa_major.$alsa_minor.$alsa_subminor";
244 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
245 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
246 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
247 else
248 echo "ALSA support disabled by configure script parameter"
249 fi
250 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
251 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
252
253 # JACK
254 AC_ARG_ENABLE(jack-driver,
255 [ --disable-jack-driver
256 Disable support for the Jack Audio Connection Kit
257 (JACK).],
258 [config_jack_driver="$enableval"],
259 [config_jack_driver="yes"]
260 )
261 have_jack=0
262 if test "$config_jack_driver" = "yes"; then
263 PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
264 if test $have_jack = "1"; then
265 AC_SUBST(JACK_LIBS)
266 AC_SUBST(JACK_CFLAGS)
267 AC_CHECK_LIB(jack, jack_client_name_size, [AC_DEFINE(HAVE_JACK_CLIENT_NAME_SIZE, 1, [Define to 1 if you have the `jack_client_name_size' function.])], , $JACK_LIBS)
268 have_audio_output_driver="true";
269 fi
270 else
271 echo "JACK support disabled by configure script parameter"
272 fi
273 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
274 AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
275
276 # ARTS
277 AC_ARG_ENABLE(arts-driver,
278 [ --disable-arts-driver
279 Disable support for the Analogue Realtime System
280 (aRts).],
281 [config_arts_driver="$enableval"],
282 [config_arts_driver="yes"]
283 )
284 have_arts=0
285 if test "$config_arts_driver" = "yes"; then
286 m4_ifdef([m4_include(m4/arts.m4)],,
287 [sinclude([m4/arts.m4])])
288 AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
289 if test "$have_arts" = "1"; then
290 have_audio_output_driver="true"
291 fi
292 else
293 echo "ARTS support disabled by configure script parameter"
294 fi
295 AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
296 AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
297
298 # ASIO AUDIO (Win32)
299 AC_ARG_ENABLE(asiosdk-dir,
300 [ --enable-asiosdk-dir
301 Directory where the ASIO SDK is located, this automatically
302 enables the compilation of the ASIO audio output driver.],
303 [config_asiosdk_dir="${enableval}"],
304 [config_asiosdk_dir="."]
305 )
306 AC_SUBST(config_asiosdk_dir)
307
308 AC_ARG_ENABLE(asio-driver,
309 [ --disable-asio-driver
310 Disable support for the Windows ASIO driver.],
311 [config_asio_driver="$enableval"],
312 [config_asio_driver="yes"]
313 )
314 have_asio=0
315 ASIOSDK_BASEDIR=
316 if test "$config_asio_driver" = "yes"; then
317 asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
318 echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
319 if test -e $asiosdk_headerfile ; then
320 echo yes
321 have_asio=1
322 ASIOSDK_BASEDIR="$config_asiosdk_dir"
323 else
324 echo no
325 have_asio=0
326 fi
327 if test "$have_asio" = "1"; then
328 have_audio_output_driver="true"
329 fi
330 else
331 echo "Windows ASIO support disabled by configure script parameter"
332 fi
333 AC_SUBST(ASIOSDK_BASEDIR)
334 AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
335 AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
336
337 # MidiShare (Linux, OS X, Windows)
338 AC_ARG_ENABLE(midishare-driver,
339 [ --disable-midishare-driver
340 Disable support for the MidiShare system.],
341 [config_midishare_driver="$enableval"],
342 [config_midishare_driver="yes"]
343 )
344 have_midishare=0
345 if test "$config_midishare_driver" = "yes"; then
346 AC_CHECK_HEADER(MidiShare.h,
347 AC_CHECK_LIB(MidiShare, MidiCountEvs,
348 have_midishare=1,
349 have_midishare=0
350 )
351 ,
352 have_midishare=0
353 )
354 if test "$have_midishare" = "1"; then
355 have_midi_input_driver="true"
356 fi
357 else
358 echo "MidiShare support disabled by configure script parameter"
359 fi
360 AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
361 AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
362
363 # CoreMIDI (OS X)
364 AC_ARG_ENABLE(coremidi-driver,
365 [ --disable-coremidi-driver
366 Disable support for the Apple CoreMIDI system.],
367 [config_coremidi_driver="$enableval"],
368 [config_coremidi_driver="yes"]
369 )
370 have_coremidi=0
371 if test "$config_coremidi_driver" = "yes"; then
372 AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
373 have_coremidi=1,
374 have_coremidi=0
375 )
376 if test "$have_coremidi" = "1"; then
377 have_midi_input_driver="true"
378 fi
379 else
380 echo "CoreMIDI support disabled by configure script parameter"
381 fi
382 AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
383 AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
384
385 # MME MIDI (Win32)
386 AC_ARG_ENABLE(mmemidi-driver,
387 [ --disable-mmemidi-driver
388 Disable support for the Windows MME MIDI system.],
389 [config_mmemidi_driver="$enableval"],
390 [config_mmemidi_driver="yes"]
391 )
392 have_mmemidi=0
393 if test "$config_mmemidi_driver" = "yes"; then
394 AC_CHECK_HEADERS(mmsystem.h,
395 have_mmemidi=1,
396 have_mmemidi=0
397 )
398 if test "$have_mmemidi" = "1"; then
399 have_midi_input_driver="true"
400 fi
401 else
402 echo "MME MIDI support disabled by configure script parameter"
403 fi
404 AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
405 AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
406
407 # have we found at least one MIDI input and one audio output driver ?
408 if test "$have_midi_input_driver" = "false"; then
409 echo "No supported MIDI input system found!"
410 echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
411 echo "ALSA, MIDIShare, CoreMIDI."
412 echo "If you think you have one of those available on your system, make sure you"
413 echo "also have the respective development (header) files installed."
414 exit -1;
415 fi
416 if test "$have_audio_output_driver" = "false"; then
417 echo "No supported audio output system found!"
418 echo "Sorry, LinuxSampler only supports ALSA, JACK and ARTS as audio output"
419 echo "driver at the moment!"
420 exit -1;
421 fi
422
423
424
425 ###########################################################################
426 # Checks for various DLL libraries
427
428 # Check presence of libgig
429 libgig_version="3.2.1"
430 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
431 if test "$HAVE_GIG" = "false"; then
432 echo "Required libgig version not found!"
433 echo "You need to have libgig version ${libgig_version} installed!"
434 exit -1;
435 else
436 echo "yes, found libgig $libgig_version"
437 fi
438 AC_SUBST(GIG_CFLAGS)
439 AC_SUBST(GIG_LIBS)
440
441 # Instruments DB feature (requires SQLite 3.3)
442 AC_ARG_ENABLE(instruments-db,
443 [ --disable-instruments-db
444 Disable compilation of the sampler's instruments
445 database feature. You need to have SQLite 3.3
446 or younger installed for this feature.],
447 [config_instruments_db="$enableval"],
448 [config_instruments_db="yes"]
449 )
450 HAVE_SQLITE3=0;
451 if test "$config_instruments_db" = "yes"; then
452 # Check presence of sqlite3
453 sqlite_version="3.3"
454 PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
455 AC_SUBST(SQLITE3_LIBS)
456 AC_SUBST(SQLITE3_CFLAGS)
457 if test $HAVE_SQLITE3 = false; then
458 HAVE_SQLITE3=0
459 config_instruments_db="no"
460 echo "*** Required sqlite version not found!"
461 echo "*** You need to have sqlite version ${sqlite_version} or higher"
462 echo "*** for instruments database support to be enabled."
463 echo "*** Support for instruments DB will be disabled!"
464 else
465 HAVE_SQLITE3=1
466 fi
467 else
468 echo "Instruments DB feature disabled by configure script parameter"
469 fi
470 AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
471 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
472
473
474
475 ###########################################################################
476 # Handle Configuration Options
477
478 # TODO: should we use AC_ARG_VAR(variable, description) instead?
479
480 AC_ARG_ENABLE(asm,
481 [ --disable-asm
482 Enable hand-crafted assembly optimizations
483 (default=on). LinuxSampler provides CPU specific
484 assembly optimizations. This is currently limited
485 to just enter a fast (denormal) FPU mode on x86
486 platforms. There are currently no synthesis core
487 assembly optimizations anymore since LS 0.4.0],
488 [config_asm="$enableval"],
489 [config_asm="yes"]
490 )
491 if test "$config_asm" = "yes"; then
492 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
493 fi
494
495 AC_ARG_ENABLE(dev-mode,
496 [ --enable-dev-mode
497 Enable development mode (default=off). In that mode
498 we do some extra sanity checks here and there.
499 This helps to spot possible problems, but reduces
500 efficiency a bit],
501 [config_dev_mode="$enableval"],
502 [config_dev_mode="no"]
503 )
504 if test "$config_dev_mode" = "yes"; then
505 AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
506 fi
507
508 AC_ARG_ENABLE(debug-level,
509 [ --enable-debug-level
510 Specify verbosity of console messages (default=1).
511 The higher the value, the higher will be verbosity.
512 A value of 0 means no console output at all.
513 There's not really an upper limit but the usual
514 level of all messages is currently somewhere less
515 than 10.],
516 [config_debug_level="${enableval}"],
517 [config_debug_level="1"]
518 )
519 AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
520
521 AC_ARG_ENABLE(rt-exceptions,
522 [ --enable-rt-exceptions
523 Enable exceptions in the realtime thread
524 (default=no). If this is enabled, exceptions will
525 be thrown on critical errors in the realtime
526 context as well. Otherwise if disabled
527 segmentation faults will be forced by the
528 application on critical errors.],
529 [config_rt_exceptions="$enableval"],
530 [config_rt_exceptions="no"]
531 )
532 if test "$config_rt_exceptions" = "yes"; then
533 AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
534 fi
535
536 AC_ARG_ENABLE(preload-samples,
537 [ --enable-preload-samples
538 Due to seeking and latency issues with hard drives
539 we have to cache a small part of samples' head in
540 RAM (default=32768). The higher this value the
541 more memory will be occupied for each sample, but
542 the safer this will be in regards of possible
543 droputs. A 'good' value depends on the running
544 system and usage dependant factors.],
545 [config_preload_samples="${enableval}"],
546 [config_preload_samples="32768"]
547 )
548 AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
549
550 AC_ARG_ENABLE(max-pitch,
551 [ --enable-max-pitch
552 Specify the maximum allowed pitch value in octaves
553 (default=4). To lower memory usage you might want
554 set a smaller value.],
555 [config_max_pitch="${enableval}"],
556 [config_max_pitch="4"]
557 )
558 AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
559
560 AC_ARG_ENABLE(max-events,
561 [ --enable-max-events
562 Specify the maximum allowed amount of events to be
563 processed per fragment (default=1024).],
564 [config_max_events="${enableval}"],
565 [config_max_events="1024"]
566 )
567 AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
568
569 AC_ARG_ENABLE(eg-bottom,
570 [ --enable-eg-bottom
571 Bottom limit of envelope generators
572 (default=0.001). Certain kinds of curve types like
573 exponential curves converge against 0 but never
574 reach 0. So we have to define a certain low value
575 after which we should consider all smaller values
576 to be 'almost zero'. The smaller this value, the
577 longer will voices survive in EG's release stage
578 and thus waste voices. If this value is too high
579 will cause click sounds though.],
580 [config_eg_bottom="${enableval}"],
581 [config_eg_bottom="0.001"]
582 )
583 AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
584
585 AC_ARG_ENABLE(eg-min-release-time,
586 [ --enable-eg-min-release-time
587 Specify the lowest allowed release time in seconds
588 (default=0.0025). This value will also be used to
589 ramp down voices on voice stealing. This value
590 should always be less than the period time of the
591 used audio driver, as in case of voice stealing
592 the killed voice needs to be completely ramped
593 down in the same fragment.],
594 [config_eg_min_release_time="${enableval}"],
595 [config_eg_min_release_time="0.0025"]
596 )
597 AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
598
599 AC_ARG_ENABLE(refill-streams,
600 [ --enable-refill-streams
601 Number of streams that should be refilled in each
602 disk thread cycle (default=4).],
603 [config_refill_streams="${enableval}"],
604 [config_refill_streams="4"]
605 )
606 AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
607
608 AC_ARG_ENABLE(stream-min-refill,
609 [ --enable-stream-min-refill
610 Minimum refill size for disk streams (default=1024).
611 The disk thread will go to sleep for a while if no
612 stream had to be refilled more than this value in
613 a disk thread cycle.],
614 [config_stream_min_refill="${enableval}"],
615 [config_stream_min_refill="1024"]
616 )
617 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
618
619 AC_ARG_ENABLE(stream-max-refill,
620 [ --enable-stream-max-refill
621 Maximum refill size for disk streams
622 (default=65536). The disk thread will refill
623 each stream only by a size of this value per
624 disk thread cycle.],
625 [config_stream_max_refill="${enableval}"],
626 [config_stream_max_refill="65536"]
627 )
628 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
629
630 AC_ARG_ENABLE(stream-size,
631 [ --enable-stream-size
632 Size of each stream's ring buffer in sample points
633 (default=262144).],
634 [config_stream_size="${enableval}"],
635 [config_stream_size="262144"]
636 )
637 AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
638
639 AC_ARG_ENABLE(max-streams,
640 [ --enable-max-streams
641 Maximum amount of disk streams (default=90). This
642 value should always be higher than the maximum
643 amount of voices.],
644 [config_max_streams="${enableval}"],
645 [config_max_streams="90"]
646 )
647 AC_DEFINE_UNQUOTED(CONFIG_MAX_STREAMS, $config_max_streams, [Define max. streams.])
648
649 AC_ARG_ENABLE(max-voices,
650 [ --enable-max-voices
651 Maximum amount of voices (default=64). This value
652 should always be lower than the maximum amount of
653 disk streams.],
654 [config_max_voices="${enableval}"],
655 [config_max_voices="64"]
656 )
657 AC_DEFINE_UNQUOTED(CONFIG_MAX_VOICES, $config_max_voices, [Define max. voices.])
658
659 AC_ARG_ENABLE(subfragment-size,
660 [ --enable-subfragment-size
661 Every audio fragment will be splitted into
662 subfragments. Where each subfragment renders
663 audio with constant synthesis parameters. This is
664 done for efficiency reasons. This parameter
665 defines the default size of a subfragment in
666 sample points. A large value means less CPU time
667 whereas a low value means better audio quality
668 (default=32).],
669 [config_subfragment_size="${enableval}"],
670 [config_subfragment_size="32"]
671 )
672 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
673
674 AC_ARG_ENABLE(global-attenuation-default,
675 [ --enable-global-attenuation-default
676 To prevent clipping all samples will be lowered
677 in amplitude by this given default factor (can
678 be overridden at runtime).
679 (default=0.35)],
680 [config_global_attenuation_default="${enableval}"],
681 [config_global_attenuation_default="0.35"]
682 )
683 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
684
685 AC_ARG_ENABLE(voice-steal-algo,
686 [ --enable-voice-steal-algo
687 Voice stealing algorithm to be used. Currently
688 available options:
689 none:
690 Disable voice stealing completely.
691 oldestvoiceonkey (default):
692 Try to kill a voice on the same key first,
693 if no success, proceed with the oldest key.
694 oldestkey:
695 Try to kill a voice from the oldest active
696 key.],
697 [ if test ! "(" "${enableval}" = "none" \
698 -o "${enableval}" = "oldestvoiceonkey" \
699 -o "${enableval}" = "oldestkey" ")" ; then
700 AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
701 else
702 config_voice_steal_algo="${enableval}"
703 fi
704 ],
705 [config_voice_steal_algo="oldestvoiceonkey"]
706 )
707 AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
708
709 AC_ARG_ENABLE(sysex-buffer-size,
710 [ --enable-sysex-buffer-size
711 System Exclusive Message buffer size in kB
712 (default=2048).],
713 [config_sysex_buffer_size="${enableval}"],
714 [config_sysex_buffer_size="2048"]
715 )
716 AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
717
718 AC_ARG_ENABLE(force-filter,
719 [ --enable-force-filter
720 If enabled will force filter to be used even if
721 no usage was define in instrument patch files.
722 (default=no).],
723 [config_force_filter="$enableval"],
724 [config_force_filter="no"]
725 )
726 if test "$config_force_filter" = "yes"; then
727 AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
728 fi
729
730 AC_ARG_ENABLE(filter-cutoff-min,
731 [ --enable-filter-cutoff-min
732 Minimum filter cutoff frequency in Hz
733 (default=100.0).],
734 [config_filter_cutoff_min="${enableval}"],
735 [config_filter_cutoff_min="100.0"]
736 )
737 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
738
739 AC_ARG_ENABLE(filter-cutoff-max,
740 [ --enable-filter-cutoff-max
741 Maximum filter cutoff frequency in Hz
742 (default=10000.0).],
743 [config_filter_cutoff_max="${enableval}"],
744 [config_filter_cutoff_max="10000.0"]
745 )
746 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
747
748 AC_ARG_ENABLE(override-cutoff-ctrl,
749 [ --enable-override-cutoff-ctrl
750 Override filter cutoff MIDI controller (default=no).
751 Note: you have to define the MIDI controller number
752 here, it's not a boolean parameter type! If this
753 option is used, controller number given by
754 instrument patch will be ignored and instead this
755 supplied value will be used.],
756 [config_override_cutoff_ctrl="${enableval}"],
757 [config_override_cutoff_ctrl="no"]
758 )
759 if test ! "$config_override_cutoff_ctrl" = "no"; then
760 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
761 fi
762
763 AC_ARG_ENABLE(override-resonance-ctrl,
764 [ --enable-override-resonance-ctrl
765 Override filter resonance MIDI controller
766 (default=no). Note: you have to define the MIDI
767 controller number here, it's not a boolean
768 parameter type! If this option is used, controller
769 number given by instrument patch will be ignored
770 and instead this supplied value will be used.],
771 [config_override_resonance_ctrl="${enableval}"],
772 [config_override_resonance_ctrl="no"]
773 )
774 if test ! "$config_override_resonance_ctrl" = "no"; then
775 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
776 fi
777
778 AC_ARG_ENABLE(override-filter-type,
779 [ --enable-override-filter-type
780 Override filter type (default=no). Options:
781 hp: for highpass
782 bp: for bandpass
783 br: for bandreject
784 lp: for lowpass
785 lpt: for lowpass turbo],
786 [ if test "${enableval}" = "hp" ; then
787 config_override_filter_type="::gig::vcf_type_highpass"
788 elif test "${enableval}" = "bp" ; then
789 config_override_filter_type="::gig::vcf_type_bandpass"
790 elif test "${enableval}" = "br" ; then
791 config_override_filter_type="::gig::vcf_type_bandreject"
792 elif test "${enableval}" = "lp" ; then
793 config_override_filter_type="::gig::vcf_type_lowpass"
794 elif test "${enableval}" = "lpt" ; then
795 config_override_filter_type="::gig::vcf_type_lowpassturbo"
796 elif test ! "${enableval}" = "no"; then
797 AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
798 fi
799 ],
800 [config_override_filter_type="no"]
801 )
802 if test ! "$config_override_filter_type" = "no"; then
803 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
804 fi
805
806 AC_ARG_ENABLE(gs-checksum,
807 [ --enable-gs-checksum
808 Enable Roland General Synth SysEx checksum check
809 (default=no). If this is enabled, all GS SysEx
810 messages which do not provide a correct checksum
811 will be ignored. This is disabled by default as
812 not all devices honor GS checksums.],
813 [config_assert_gs_sysex_checksum="$enableval"],
814 [config_assert_gs_sysex_checksum="no"]
815 )
816 if test "config_assert_gs_sysex_checksum" = "yes"; then
817 AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
818 fi
819
820 AC_ARG_ENABLE(portamento-time-min,
821 [ --enable-portamento-time-min
822 Minimum Portamento time in seconds
823 (default=0.1).],
824 [config_portamento_time_min="${enableval}"],
825 [config_portamento_time_min="0.1"]
826 )
827 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
828
829 AC_ARG_ENABLE(portamento-time-max,
830 [ --enable-portamento-time-max
831 Maximum Portamento time in seconds
832 (default=32).],
833 [config_portamento_time_max="${enableval}"],
834 [config_portamento_time_max="32"]
835 )
836 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
837
838 AC_ARG_ENABLE(portamento-time-default,
839 [ --enable-portamento-time-default
840 Default Portamento time in seconds
841 (default=1).],
842 [config_portamento_time_default="${enableval}"],
843 [config_portamento_time_default="1"]
844 )
845 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
846
847 AC_ARG_ENABLE(signed-triang-algo,
848 [ --enable-signed-triang-algo
849 Signed triangular wave algorithm to be used (e.g. for LFOs).
850 Currently available options:
851 intmath:
852 Uses integer math without any branch will then be
853 converted to floating point value for each sample point.
854 This int->float conversion might hurt on some systems.
855 intmathabs:
856 Similar to intmath but uses abs() function.
857 Depending on compiler and platrofm this could
858 perform better than integer math as it avoids
859 an extra integer multiply instruction.
860 diharmonic:
861 The triangular wave will be approximated by adding two
862 sinusoidials. This solution might especially hurt on
863 systems with weak floating point unit.
864 benchmark (default):
865 This is not an algorithm. Use this option if the
866 appropriate algorithm should be automatically
867 chosen by the configure script by performing a
868 benchmark between the algorithms mentioned above.
869 This will NOT work for cross compilation!],
870 [ if test ! "(" "${enableval}" = "intmath" \
871 -o "${enableval}" = "intmathabs" \
872 -o "${enableval}" = "diharmonic" ")" ; then
873 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
874 else
875 config_signed_triang_algo="${enableval}"
876 fi
877 ],
878 [config_signed_triang_algo="benchmark"]
879 )
880
881 AC_ARG_ENABLE(unsigned-triang-algo,
882 [ --enable-unsigned-triang-algo
883 Unsigned triangular wave algorithm to be used (e.g. for LFOs).
884 Currently available options:
885 intmath:
886 Uses integer math without any branch will then be
887 converted to floating point value for each sample point.
888 This int->float conversion might hurt on some systems.
889 intmathabs:
890 Similar to intmath but uses abs() function.
891 Depending on compiler and platrofm this could
892 perform better than integer math as it avoids
893 an extra integer multiply instruction.
894 diharmonic:
895 The triangular wave will be approximated by adding two
896 sinusoidials. This solution might especially hurt on
897 systems with weak floating point unit.
898 benchmark (default):
899 This is not an algorithm. Use this option if the
900 appropriate algorithm should be automatically
901 chosen by the configure script by performing a
902 benchmark between the algorithms mentioned above.
903 This will NOT work for cross compilation!],
904 [ if test ! "(" "${enableval}" = "intmath" \
905 -o "${enableval}" = "intmathabs" \
906 -o "${enableval}" = "diharmonic" ")" ; then
907 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
908 else
909 config_unsigned_triang_algo="${enableval}"
910 fi
911 ],
912 [config_unsigned_triang_algo="benchmark"]
913 )
914
915 AC_ARG_ENABLE(process-muted-channels,
916 [ --enable-process-muted-channels
917 Enable processing of muted channels (default=no).
918 In that mode all MIDI events in the muted channels
919 will be processed. This will provide information
920 about the active voices in the muted channels and
921 will not discard notes, triggered in mute mode,
922 when the channel is unmuted. But also will reduce
923 the efficiency.],
924 [config_process_muted_channels="$enableval"],
925 [config_process_muted_channels="no"]
926 )
927 if test "$config_process_muted_channels" = "yes"; then
928 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
929 fi
930
931 AC_ARG_ENABLE(process-all-notes-off,
932 [ --disable-process-all-notes-off
933 Disable interpretation of All-Notes-Off MIDI
934 messages (default=on). By default LS will release
935 all voices whenever it receives an All-Notes-Off
936 MIDI message. You can disable this behavior, so
937 that LS simply ignores such messages.],
938 [config_process_all_notes_off="$enableval"],
939 [config_process_all_notes_off="yes"]
940 )
941 if test "$config_process_all_notes_off" = "yes"; then
942 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
943 fi
944
945 AC_ARG_ENABLE(interpolate-volume,
946 [ --disable-interpolate-volume
947 Disable interpolation of volume modulation
948 (default=on). With this enabled, the volume changes
949 generated by for example the envelope generator
950 will be smoother, minimizing the risk for audio
951 clicks. Disable it to reduce CPU usage.],
952 [config_interpolate_volume="$enableval"],
953 [config_interpolate_volume="yes"]
954 )
955 if test "$config_interpolate_volume" = "yes"; then
956 AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
957 fi
958
959 AC_ARG_ENABLE(plugin-dir,
960 [ --enable-plugin-dir
961 Directory where the sampler shall look for potential plugins,
962 that is 3rd party shared libraries that should be loaded by
963 the sampler on startup. By default the sampler will search
964 for plugins in the subdirectory "plugins" below its own
965 library directory.
966 (i.e. /usr/local/lib/linuxsampler/plugins)],
967 [config_plugin_dir="${enableval}"],
968 [config_plugin_dir="${libdir}/linuxsampler/plugins"]
969 )
970 AC_SUBST(config_plugin_dir)
971
972 AC_ARG_ENABLE(default-instruments-db-location,
973 [ --enable-default-instruments-db-location
974 Only when instruments DB feature is enabled: file name
975 which shall be taken as default location of the
976 instruments DB file. This location can still be
977 overridden at runtime with a command line switch.
978 (default: /var/lib/linuxsampler/instruments.db)],
979 [config_default_instruments_db_file="${enableval}"],
980 [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
981 )
982 AC_DEFINE_UNQUOTED(
983 CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
984 "$config_default_instruments_db_file",
985 [Only when instruments DB feature is enabled: default location of the DB file.]
986 )
987 AC_SUBST(config_default_instruments_db_file)
988
989
990 ###########################################################################
991 # Automatic Benchmarks (to detect the best algorithms for the system)
992
993 AC_LANG_SAVE
994
995 if test "$config_signed_triang_algo" = "benchmark"; then
996 echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
997 AC_LANG_CPLUSPLUS
998 AC_TRY_RUN([
999 #define SIGNED 1
1000 #define SILENT 1
1001 #include "${srcdir}/benchmarks/triang.cpp"
1002 ],
1003 triang_signed=0,
1004 triang_signed=$?,
1005 triang_signed=0
1006 )
1007 if test "$triang_signed" = "2"; then
1008 config_signed_triang_algo="intmath"
1009 echo "integer math"
1010 elif test "$triang_signed" = "3"; then
1011 config_signed_triang_algo="diharmonic"
1012 echo "di harmonics"
1013 elif test "$triang_signed" = "5"; then
1014 config_signed_triang_algo="intmathabs"
1015 echo "integer math using abs()"
1016 else
1017 echo "Benchmark of signed triangular wave algorithms failed!"
1018 echo "Maybe you are doing cross compilation? In that case you have to select"
1019 echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1020 echo "Call './configure --help' for further information or read configure.in."
1021 exit -1;
1022 fi
1023 else
1024 case "$config_signed_triang_algo" in
1025 intmath)
1026 triang_signed=2 ;;
1027 diharmonic)
1028 triang_signed=3 ;;
1029 intmathabs)
1030 triang_signed=5 ;;
1031 esac
1032 fi
1033 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1034
1035 if test "$config_unsigned_triang_algo" = "benchmark"; then
1036 echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1037 AC_LANG_CPLUSPLUS
1038 AC_TRY_RUN([
1039 #define SIGNED 0
1040 #define SILENT 1
1041 #include "${srcdir}/benchmarks/triang.cpp"
1042 ],
1043 triang_unsigned=0,
1044 triang_unsigned=$?,
1045 triang_unsigned=0
1046 )
1047 if test "$triang_unsigned" = "2"; then
1048 config_unsigned_triang_algo="intmath"
1049 echo "integer math"
1050 elif test "$triang_unsigned" = "3"; then
1051 config_unsigned_triang_algo="diharmonic"
1052 echo "di harmonics"
1053 elif test "$triang_unsigned" = "5"; then
1054 config_unsigned_triang_algo="intmathabs"
1055 echo "integer math using abs()"
1056 else
1057 echo "Benchmark of unsigned triangular wave algorithms failed!"
1058 echo "Maybe you are doing cross compilation? In that case you have to select"
1059 echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1060 echo "Call './configure --help' for further information or read configure.in."
1061 exit -1;
1062 fi
1063 else
1064 case "$config_unsigned_triang_algo" in
1065 intmath)
1066 triang_unsigned=2 ;;
1067 diharmonic)
1068 triang_unsigned=3 ;;
1069 intmathabs)
1070 triang_unsigned=5 ;;
1071 esac
1072 fi
1073 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1074
1075 AC_LANG_RESTORE
1076
1077
1078 ###########################################################################
1079 # Create Build Files
1080
1081 AM_CONFIG_HEADER(config.h)
1082 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1083
1084 AC_LANG_CPLUSPLUS
1085 AC_PROG_CXX
1086
1087 # some gcc 4.0 versions need -msse for SSE register allocations
1088 if test "$config_asm" = "yes"; then
1089 if test "$def_arch_x86" = 1; then
1090 CXXFLAGS="$CXXFLAGS -msse"
1091 fi
1092 fi
1093
1094 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1095 # this, the dlfcn.h check in am_prog_libtool may fail.
1096 AC_CHECK_HEADER(stdlib.h)
1097
1098 AC_OUTPUT( \
1099 Makefile \
1100 man/Makefile \
1101 man/linuxsampler.1 \
1102 src/Makefile \
1103 src/db/Makefile \
1104 src/network/Makefile \
1105 src/engines/Makefile \
1106 src/engines/gig/Makefile \
1107 src/engines/common/Makefile \
1108 src/common/Makefile \
1109 src/testcases/Makefile \
1110 src/drivers/Makefile \
1111 src/drivers/audio/Makefile \
1112 src/drivers/midi/Makefile \
1113 src/plugins/Makefile \
1114 linuxsampler.spec \
1115 debian/Makefile \
1116 Artwork/Makefile \
1117 scripts/Makefile \
1118 osx/Makefile \
1119 osx/linuxsampler.xcodeproj/Makefile \
1120 Documentation/Makefile \
1121 Documentation/Engines/Makefile \
1122 Documentation/Engines/gig/Makefile \
1123 linuxsampler.pc \
1124 Doxyfile \
1125 )
1126
1127 # resolve all nested variables in '${config_plugin_dir}'
1128 # (merely for providing a human readable summary below)
1129 while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1130 config_plugin_dir=`eval echo ${config_plugin_dir}`
1131 done
1132
1133
1134 ###########################################################################
1135 # Output All Configuration Options
1136
1137 echo ""
1138 echo "#####################################################################"
1139 echo "# LinuxSampler Configuration #"
1140 echo "#-------------------------------------------------------------------#"
1141 echo "# Assembly Optimizations: ${config_asm}"
1142 echo "# Development Mode: ${config_dev_mode}"
1143 echo "# Debug Level: ${config_debug_level}"
1144 echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1145 echo "# Preload Samples: ${config_preload_samples}"
1146 echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1147 echo "# Maximum Events: ${config_max_events}"
1148 echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1149 echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1150 echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1151 echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1152 echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1153 echo "# Stream Size: ${config_stream_size}"
1154 echo "# Maximum Disk Streams: ${config_max_streams}"
1155 echo "# Maximum Voices: ${config_max_voices}"
1156 echo "# Default Subfragment Size: ${config_subfragment_size}"
1157 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1158 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1159 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1160 echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1161 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1162 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1163 echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1164 echo "# Default Portamento Time: ${config_portamento_time_default} s"
1165 echo "# Force Filter Usage: ${config_force_filter}"
1166 echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1167 echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1168 echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1169 echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1170 echo "# Override Filter Type: ${config_override_filter_type}"
1171 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1172 echo "# Process Muted Channels: ${config_process_muted_channels}"
1173 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1174 echo "# Interpolate Volume: ${config_interpolate_volume}"
1175 echo "# Instruments database support: ${config_instruments_db}"
1176 if test "$config_instruments_db" = "yes"; then
1177 echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1178 fi
1179 echo "# Plugin Path: ${config_plugin_dir}"
1180 echo "#-------------------------------------------------------------------#"
1181 echo "# Read './configure --help' or file 'configure.in' for details. #"
1182 echo "#####################################################################"
1183 echo ""
1184 echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1185 echo ""

  ViewVC Help
Powered by ViewVC