/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Contents of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1649 - (show annotations) (download)
Fri Jan 25 15:06:02 2008 UTC (16 years, 1 month ago) by nagata
Original Path: linuxsampler/trunk/configure.in
File size: 49034 byte(s)
* added a new config option --enable-pthread-testcancel, which uses
pthread_testcancel() instead of asynchronous canceling (needed for OSX)

1 AC_INIT(configure.in)
2
3 #------------------------------------------------------------------------------------
4 # LinuxSampler's / liblinuxsampler's "official" release version:
5
6 LINUXSAMPLER_RELEASE_MAJOR=0
7 LINUXSAMPLER_RELEASE_MINOR=5
8 LINUXSAMPLER_RELEASE_BUILD=1
9
10 #------------------------------------------------------------------------------------
11 # The following is the libtool / shared library version. This doesn't have to
12 # do anything with the release version. It MUST conform to the following rules:
13 #
14 # 1. Start with version information of `0:0:0' for each libtool library.
15 # 2. Update the version information only immediately before a public release of
16 # your software. More frequent updates are unnecessary, and only guarantee
17 # that the current interface number gets larger faster.
18 # 3. If the library source code has changed at all since the last update, then
19 # increment revision (`c:r:a' becomes `c:r+1:a').
20 # 4. If any interfaces have been added, removed, or changed since the last update,
21 # increment current, and set revision to 0.
22 # 5. If any interfaces have been added since the last public release, then increment
23 # age.
24 # 6. If any interfaces have been removed since the last public release, then set age
25 # to 0.
26
27 LIBLINUXSAMPLER_LT_CURRENT=2
28 LIBLINUXSAMPLER_LT_REVISION=0
29 LIBLINUXSAMPLER_LT_AGE=1
30 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31
32 #------------------------------------------------------------------------------------
33 # the LSCP specification version this LinuSampler release complies with:
34
35 LSCP_RELEASE_MAJOR=1
36 LSCP_RELEASE_MINOR=3
37
38 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40
41 AM_PROG_LIBTOOL
42
43 AC_SUBST(SHLIB_VERSION_ARG)
44 AC_SUBST(SHARED_VERSION_INFO)
45
46 AC_C_BIGENDIAN
47 AC_CANONICAL_SYSTEM
48
49 AC_SUBST(target)
50 AC_SUBST(target_alias)
51 AC_SUBST(target_cpu)
52 AC_SUBST(target_os)
53 AC_SUBST(target_vendor)
54
55 PKG_PROG_PKG_CONFIG
56
57 ###########################################################################
58 # General Checks
59
60 AC_MSG_CHECKING([whether x86 architecture])
61 def_arch_x86=0
62 case $target_cpu in
63 "i386" | "i486" | "i586" | "i686" | "i786")
64 echo "yes"
65 def_arch_x86=1;;
66 *)
67 echo "no";;
68 esac
69 AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
70
71 # determine the right gcc switch for CPU specific optimizations
72 # (only if the user did not provide one)
73 CXX_CPU_SWITCH=
74 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
75 if test "$def_arch_x86" = 1; then
76 CXX_CPU_SWITCH="-march=$target_cpu"
77 elif test "$target_cpu" = "ppc"; then
78 CXX_CPU_SWITCH="-arch=$target_cpu"
79 fi
80 fi
81 AC_SUBST([CXX_CPU_SWITCH])
82
83 # check if we're on MS Windows
84 AC_CHECK_HEADERS(
85 mmsystem.h,
86 have_windows=1,
87 have_windows=0
88 )
89 AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
90
91 AC_MSG_CHECKING([whether UNIX98 compatible])
92 AC_LANG_SAVE
93 AC_LANG_C
94 AC_TRY_RUN([
95 #ifndef _GNU_SOURCE
96 #define _GNU_SOURCE 1
97 #endif
98 #include <features.h>
99 void main(void) {
100 #if _XOPEN_SOURCE >= 500
101 exit(0); /* UNIX98 compatible */
102 #else
103 exit(-1); /* not UNIX98 compatible */
104 #endif
105 }
106 ],
107 have_unix98="yes",
108 have_unix98="no",
109 have_unix98="no"
110 )
111 AC_LANG_RESTORE
112 AC_MSG_RESULT([$have_unix98])
113 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
114 if test "x$HAVE_UNIX98" = "x"; then
115 echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
116 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
117 echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
118 echo "have a UNIX98 compatible system."
119 exit -1;
120 fi
121 fi
122
123 # check for <features.h>
124 AC_CHECK_HEADERS(features.h)
125
126 # test for POSIX thread library
127 m4_ifdef([m4_include(m4/pthread.m4)],,
128 [sinclude([m4/pthread.m4])])
129 ACX_PTHREAD
130 LIBS="$PTHREAD_LIBS $LIBS"
131 CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
132 CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
133 CC="$PTHREAD_CC"
134
135 # check for a bug in NPTL-enabled glibc
136 # (see Gentoo bug report #194076)
137 AC_ARG_ENABLE(nptl-bug-check,
138 [ --disable-nptl-bug-check
139 Disable check for a bug in certain NPTL-enabled
140 glibc versions that caused crashs.],
141 [config_check_nptl_bug="$enableval"],
142 [config_check_nptl_bug="yes"]
143 )
144 if test "$config_check_nptl_bug" = "yes"; then
145 m4_ifdef([m4_include(m4/nptl_bug.m4)],,
146 [sinclude([m4/nptl_bug.m4])])
147 ACX_NPTL_GLIBC_BUG([
148 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
149 echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
150 echo "probably crash due to this. Please report us the system you are"
151 echo "using and/or file a bug report to the bug tracking system of"
152 echo "your distribution."
153 echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
154 echo "well, you can try to circumvent this problem for now by setting"
155 echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
156 echo "should cause this test to pass."
157 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
158 AC_MSG_ERROR([possibly NPTL glibc bug detected])
159 ])
160 else
161 echo "NPTL glibc bug check disabled"
162 fi
163
164
165
166 ###########################################################################
167 # Checks for available audio and MIDI systems / drivers
168 # (we throw an error if there's not at least one system for audio output and MIDI input available)
169
170 have_midi_input_driver="false"
171 have_audio_output_driver="false"
172
173 # ALSA
174 AC_ARG_ENABLE(alsa-driver,
175 [ --disable-alsa-driver
176 Disable support for the Advanced Linux Sound
177 Architecture (ALSA).],
178 [config_alsa_driver="$enableval"],
179 [config_alsa_driver="yes"]
180 )
181 have_alsa=0
182 if test "$config_alsa_driver" = "yes"; then
183 AC_CHECK_HEADER(alsa/asoundlib.h,
184 AC_CHECK_LIB(asound, main,
185 have_alsa=1
186 ,
187 have_alsa=0
188 )
189 ,
190 have_alsa=0
191 )
192 if test "$have_alsa" = "1"; then
193 have_midi_input_driver="true"
194 have_audio_output_driver="true";
195 fi
196
197 echo -n "checking Alsa version... "
198 AC_LANG_SAVE
199 AC_LANG_C
200 AC_TRY_RUN([
201 #include <alsa/asoundlib.h>
202 void main(void) {
203 /* ensure backward compatibility */
204 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
205 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
206 #endif
207 exit(SND_LIB_MAJOR);
208 }
209 ],
210 alsa_major=0,
211 alsa_major=$?,
212 alsa_major=0
213 )
214 AC_TRY_RUN([
215 #include <alsa/asoundlib.h>
216 void main(void) {
217 /* ensure backward compatibility */
218 #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
219 #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
220 #endif
221 exit(SND_LIB_MINOR);
222 }
223 ],
224 alsa_minor=0,
225 alsa_minor=$?,
226 alsa_minor=0
227 )
228 AC_TRY_RUN([
229 #include <alsa/asoundlib.h>
230 void main(void) {
231 /* ensure backward compatibility */
232 #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
233 #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
234 #endif
235 exit(SND_LIB_SUBMINOR);
236 }
237 ],
238 alsa_subminor=0,
239 alsa_subminor=$?,
240 alsa_subminor=0
241 )
242 AC_LANG_RESTORE
243 echo "$alsa_major.$alsa_minor.$alsa_subminor";
244 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
245 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
246 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
247 else
248 echo "ALSA support disabled by configure script parameter"
249 fi
250 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
251 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
252
253 # JACK
254 AC_ARG_ENABLE(jack-driver,
255 [ --disable-jack-driver
256 Disable support for the Jack Audio Connection Kit
257 (JACK).],
258 [config_jack_driver="$enableval"],
259 [config_jack_driver="yes"]
260 )
261 have_jack=0
262 if test "$config_jack_driver" = "yes"; then
263 PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
264 if test $have_jack = "1"; then
265 AC_SUBST(JACK_LIBS)
266 AC_SUBST(JACK_CFLAGS)
267 AC_CHECK_LIB(jack, jack_client_name_size, [AC_DEFINE(HAVE_JACK_CLIENT_NAME_SIZE, 1, [Define to 1 if you have the `jack_client_name_size' function.])], , $JACK_LIBS)
268 have_audio_output_driver="true";
269 fi
270 else
271 echo "JACK support disabled by configure script parameter"
272 fi
273 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
274 AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
275
276 # ARTS
277 AC_ARG_ENABLE(arts-driver,
278 [ --disable-arts-driver
279 Disable support for the Analogue Realtime System
280 (aRts).],
281 [config_arts_driver="$enableval"],
282 [config_arts_driver="yes"]
283 )
284 have_arts=0
285 if test "$config_arts_driver" = "yes"; then
286 m4_ifdef([m4_include(m4/arts.m4)],,
287 [sinclude([m4/arts.m4])])
288 AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
289 if test "$have_arts" = "1"; then
290 have_audio_output_driver="true"
291 fi
292 else
293 echo "ARTS support disabled by configure script parameter"
294 fi
295 AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
296 AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
297
298 # ASIO AUDIO (Win32)
299 AC_ARG_ENABLE(asiosdk-dir,
300 [ --enable-asiosdk-dir
301 Directory where the ASIO SDK is located, this automatically
302 enables the compilation of the ASIO audio output driver.],
303 [config_asiosdk_dir="${enableval}"],
304 [config_asiosdk_dir="."]
305 )
306 AC_SUBST(config_asiosdk_dir)
307
308 AC_ARG_ENABLE(asio-driver,
309 [ --disable-asio-driver
310 Disable support for the Windows ASIO driver.],
311 [config_asio_driver="$enableval"],
312 [config_asio_driver="yes"]
313 )
314 have_asio=0
315 ASIOSDK_BASEDIR=
316 if test "$config_asio_driver" = "yes"; then
317 asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
318 echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
319 if test -e $asiosdk_headerfile ; then
320 echo yes
321 have_asio=1
322 ASIOSDK_BASEDIR="$config_asiosdk_dir"
323 else
324 echo no
325 have_asio=0
326 fi
327 if test "$have_asio" = "1"; then
328 have_audio_output_driver="true"
329 fi
330 else
331 echo "Windows ASIO support disabled by configure script parameter"
332 fi
333 AC_SUBST(ASIOSDK_BASEDIR)
334 AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
335 AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
336
337 # MidiShare (Linux, OS X, Windows)
338 AC_ARG_ENABLE(midishare-driver,
339 [ --disable-midishare-driver
340 Disable support for the MidiShare system.],
341 [config_midishare_driver="$enableval"],
342 [config_midishare_driver="yes"]
343 )
344 have_midishare=0
345 if test "$config_midishare_driver" = "yes"; then
346 AC_CHECK_HEADER(MidiShare.h,
347 AC_CHECK_LIB(MidiShare, MidiCountEvs,
348 have_midishare=1,
349 have_midishare=0
350 )
351 ,
352 have_midishare=0
353 )
354 if test "$have_midishare" = "1"; then
355 have_midi_input_driver="true"
356 fi
357 else
358 echo "MidiShare support disabled by configure script parameter"
359 fi
360 AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
361 AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
362
363 # CoreMIDI (OS X)
364 AC_ARG_ENABLE(coremidi-driver,
365 [ --disable-coremidi-driver
366 Disable support for the Apple CoreMIDI system.],
367 [config_coremidi_driver="$enableval"],
368 [config_coremidi_driver="yes"]
369 )
370 have_coremidi=0
371 if test "$config_coremidi_driver" = "yes"; then
372 AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
373 have_coremidi=1,
374 have_coremidi=0
375 )
376 if test "$have_coremidi" = "1"; then
377 have_midi_input_driver="true"
378 fi
379 else
380 echo "CoreMIDI support disabled by configure script parameter"
381 fi
382 AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
383 AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
384
385 # MME MIDI (Win32)
386 AC_ARG_ENABLE(mmemidi-driver,
387 [ --disable-mmemidi-driver
388 Disable support for the Windows MME MIDI system.],
389 [config_mmemidi_driver="$enableval"],
390 [config_mmemidi_driver="yes"]
391 )
392 have_mmemidi=0
393 if test "$config_mmemidi_driver" = "yes"; then
394 AC_CHECK_HEADERS(mmsystem.h,
395 have_mmemidi=1,
396 have_mmemidi=0
397 )
398 if test "$have_mmemidi" = "1"; then
399 have_midi_input_driver="true"
400 fi
401 else
402 echo "MME MIDI support disabled by configure script parameter"
403 fi
404 AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
405 AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
406
407 # have we found at least one MIDI input and one audio output driver ?
408 if test "$have_midi_input_driver" = "false"; then
409 echo "No supported MIDI input system found!"
410 echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
411 echo "ALSA, MIDIShare, CoreMIDI."
412 echo "If you think you have one of those available on your system, make sure you"
413 echo "also have the respective development (header) files installed."
414 exit -1;
415 fi
416 if test "$have_audio_output_driver" = "false"; then
417 echo "No supported audio output system found!"
418 echo "Sorry, LinuxSampler only supports ALSA, JACK and ARTS as audio output"
419 echo "driver at the moment!"
420 exit -1;
421 fi
422
423
424
425 ###########################################################################
426 # Checks for various DLL libraries
427
428 # Check presence of libgig
429 libgig_version="3.2.1"
430 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
431 if test "$HAVE_GIG" = "false"; then
432 echo "Required libgig version not found!"
433 echo "You need to have libgig version ${libgig_version} installed!"
434 exit -1;
435 else
436 echo "yes, found libgig $libgig_version"
437 fi
438 AC_SUBST(GIG_CFLAGS)
439 AC_SUBST(GIG_LIBS)
440
441 # Instruments DB feature (requires SQLite 3.3)
442 AC_ARG_ENABLE(instruments-db,
443 [ --disable-instruments-db
444 Disable compilation of the sampler's instruments
445 database feature. You need to have SQLite 3.3
446 or younger installed for this feature.],
447 [config_instruments_db="$enableval"],
448 [config_instruments_db="yes"]
449 )
450 HAVE_SQLITE3=0;
451 if test "$config_instruments_db" = "yes"; then
452 # Check presence of sqlite3
453 sqlite_version="3.3"
454 PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
455 AC_SUBST(SQLITE3_LIBS)
456 AC_SUBST(SQLITE3_CFLAGS)
457 if test $HAVE_SQLITE3 = false; then
458 HAVE_SQLITE3=0
459 config_instruments_db="no"
460 echo "*** Required sqlite version not found!"
461 echo "*** You need to have sqlite version ${sqlite_version} or higher"
462 echo "*** for instruments database support to be enabled."
463 echo "*** Support for instruments DB will be disabled!"
464 else
465 HAVE_SQLITE3=1
466 fi
467 else
468 echo "Instruments DB feature disabled by configure script parameter"
469 fi
470 AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
471 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
472
473
474
475 ###########################################################################
476 # Handle Configuration Options
477
478 # TODO: should we use AC_ARG_VAR(variable, description) instead?
479
480 AC_ARG_ENABLE(asm,
481 [ --disable-asm
482 Enable hand-crafted assembly optimizations
483 (default=on). LinuxSampler provides CPU specific
484 assembly optimizations. This is currently limited
485 to just enter a fast (denormal) FPU mode on x86
486 platforms. There are currently no synthesis core
487 assembly optimizations anymore since LS 0.4.0],
488 [config_asm="$enableval"],
489 [config_asm="yes"]
490 )
491 if test "$config_asm" = "yes"; then
492 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
493 fi
494
495 AC_ARG_ENABLE(dev-mode,
496 [ --enable-dev-mode
497 Enable development mode (default=off). In that mode
498 we do some extra sanity checks here and there.
499 This helps to spot possible problems, but reduces
500 efficiency a bit],
501 [config_dev_mode="$enableval"],
502 [config_dev_mode="no"]
503 )
504 if test "$config_dev_mode" = "yes"; then
505 AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
506 fi
507
508 AC_ARG_ENABLE(debug-level,
509 [ --enable-debug-level
510 Specify verbosity of console messages (default=1).
511 The higher the value, the higher will be verbosity.
512 A value of 0 means no console output at all.
513 There's not really an upper limit but the usual
514 level of all messages is currently somewhere less
515 than 10.],
516 [config_debug_level="${enableval}"],
517 [config_debug_level="1"]
518 )
519 AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
520
521 AC_ARG_ENABLE(rt-exceptions,
522 [ --enable-rt-exceptions
523 Enable exceptions in the realtime thread
524 (default=no). If this is enabled, exceptions will
525 be thrown on critical errors in the realtime
526 context as well. Otherwise if disabled
527 segmentation faults will be forced by the
528 application on critical errors.],
529 [config_rt_exceptions="$enableval"],
530 [config_rt_exceptions="no"]
531 )
532 if test "$config_rt_exceptions" = "yes"; then
533 AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
534 fi
535
536 AC_ARG_ENABLE(pthread-testcancel,
537 [ --enable-pthread-testcancel
538 Enable pthread_testcancel() calls and avoid asynchronous
539 cancel of pthreads (default=no).],
540 [config_pthread_testcancel="$enableval"],
541 [config_pthread_testcancel="no"]
542 )
543 if test "$config_pthread_testcancel" = "yes"; then
544 AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
545 fi
546
547 AC_ARG_ENABLE(preload-samples,
548 [ --enable-preload-samples
549 Due to seeking and latency issues with hard drives
550 we have to cache a small part of samples' head in
551 RAM (default=32768). The higher this value the
552 more memory will be occupied for each sample, but
553 the safer this will be in regards of possible
554 droputs. A 'good' value depends on the running
555 system and usage dependant factors.],
556 [config_preload_samples="${enableval}"],
557 [config_preload_samples="32768"]
558 )
559 AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
560
561 AC_ARG_ENABLE(max-pitch,
562 [ --enable-max-pitch
563 Specify the maximum allowed pitch value in octaves
564 (default=4). To lower memory usage you might want
565 set a smaller value.],
566 [config_max_pitch="${enableval}"],
567 [config_max_pitch="4"]
568 )
569 AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
570
571 AC_ARG_ENABLE(max-events,
572 [ --enable-max-events
573 Specify the maximum allowed amount of events to be
574 processed per fragment (default=1024).],
575 [config_max_events="${enableval}"],
576 [config_max_events="1024"]
577 )
578 AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
579
580 AC_ARG_ENABLE(eg-bottom,
581 [ --enable-eg-bottom
582 Bottom limit of envelope generators
583 (default=0.001). Certain kinds of curve types like
584 exponential curves converge against 0 but never
585 reach 0. So we have to define a certain low value
586 after which we should consider all smaller values
587 to be 'almost zero'. The smaller this value, the
588 longer will voices survive in EG's release stage
589 and thus waste voices. If this value is too high
590 will cause click sounds though.],
591 [config_eg_bottom="${enableval}"],
592 [config_eg_bottom="0.001"]
593 )
594 AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
595
596 AC_ARG_ENABLE(eg-min-release-time,
597 [ --enable-eg-min-release-time
598 Specify the lowest allowed release time in seconds
599 (default=0.0025). This value will also be used to
600 ramp down voices on voice stealing. This value
601 should always be less than the period time of the
602 used audio driver, as in case of voice stealing
603 the killed voice needs to be completely ramped
604 down in the same fragment.],
605 [config_eg_min_release_time="${enableval}"],
606 [config_eg_min_release_time="0.0025"]
607 )
608 AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
609
610 AC_ARG_ENABLE(refill-streams,
611 [ --enable-refill-streams
612 Number of streams that should be refilled in each
613 disk thread cycle (default=4).],
614 [config_refill_streams="${enableval}"],
615 [config_refill_streams="4"]
616 )
617 AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
618
619 AC_ARG_ENABLE(stream-min-refill,
620 [ --enable-stream-min-refill
621 Minimum refill size for disk streams (default=1024).
622 The disk thread will go to sleep for a while if no
623 stream had to be refilled more than this value in
624 a disk thread cycle.],
625 [config_stream_min_refill="${enableval}"],
626 [config_stream_min_refill="1024"]
627 )
628 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
629
630 AC_ARG_ENABLE(stream-max-refill,
631 [ --enable-stream-max-refill
632 Maximum refill size for disk streams
633 (default=65536). The disk thread will refill
634 each stream only by a size of this value per
635 disk thread cycle.],
636 [config_stream_max_refill="${enableval}"],
637 [config_stream_max_refill="65536"]
638 )
639 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
640
641 AC_ARG_ENABLE(stream-size,
642 [ --enable-stream-size
643 Size of each stream's ring buffer in sample points
644 (default=262144).],
645 [config_stream_size="${enableval}"],
646 [config_stream_size="262144"]
647 )
648 AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
649
650 AC_ARG_ENABLE(max-streams,
651 [ --enable-max-streams
652 Maximum amount of disk streams (default=90). This
653 value should always be higher than the maximum
654 amount of voices.],
655 [config_max_streams="${enableval}"],
656 [config_max_streams="90"]
657 )
658 AC_DEFINE_UNQUOTED(CONFIG_MAX_STREAMS, $config_max_streams, [Define max. streams.])
659
660 AC_ARG_ENABLE(max-voices,
661 [ --enable-max-voices
662 Maximum amount of voices (default=64). This value
663 should always be lower than the maximum amount of
664 disk streams.],
665 [config_max_voices="${enableval}"],
666 [config_max_voices="64"]
667 )
668 AC_DEFINE_UNQUOTED(CONFIG_MAX_VOICES, $config_max_voices, [Define max. voices.])
669
670 AC_ARG_ENABLE(subfragment-size,
671 [ --enable-subfragment-size
672 Every audio fragment will be splitted into
673 subfragments. Where each subfragment renders
674 audio with constant synthesis parameters. This is
675 done for efficiency reasons. This parameter
676 defines the default size of a subfragment in
677 sample points. A large value means less CPU time
678 whereas a low value means better audio quality
679 (default=32).],
680 [config_subfragment_size="${enableval}"],
681 [config_subfragment_size="32"]
682 )
683 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
684
685 AC_ARG_ENABLE(global-attenuation-default,
686 [ --enable-global-attenuation-default
687 To prevent clipping all samples will be lowered
688 in amplitude by this given default factor (can
689 be overridden at runtime).
690 (default=0.35)],
691 [config_global_attenuation_default="${enableval}"],
692 [config_global_attenuation_default="0.35"]
693 )
694 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
695
696 AC_ARG_ENABLE(voice-steal-algo,
697 [ --enable-voice-steal-algo
698 Voice stealing algorithm to be used. Currently
699 available options:
700 none:
701 Disable voice stealing completely.
702 oldestvoiceonkey (default):
703 Try to kill a voice on the same key first,
704 if no success, proceed with the oldest key.
705 oldestkey:
706 Try to kill a voice from the oldest active
707 key.],
708 [ if test ! "(" "${enableval}" = "none" \
709 -o "${enableval}" = "oldestvoiceonkey" \
710 -o "${enableval}" = "oldestkey" ")" ; then
711 AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
712 else
713 config_voice_steal_algo="${enableval}"
714 fi
715 ],
716 [config_voice_steal_algo="oldestvoiceonkey"]
717 )
718 AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
719
720 AC_ARG_ENABLE(sysex-buffer-size,
721 [ --enable-sysex-buffer-size
722 System Exclusive Message buffer size in kB
723 (default=2048).],
724 [config_sysex_buffer_size="${enableval}"],
725 [config_sysex_buffer_size="2048"]
726 )
727 AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
728
729 AC_ARG_ENABLE(force-filter,
730 [ --enable-force-filter
731 If enabled will force filter to be used even if
732 no usage was define in instrument patch files.
733 (default=no).],
734 [config_force_filter="$enableval"],
735 [config_force_filter="no"]
736 )
737 if test "$config_force_filter" = "yes"; then
738 AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
739 fi
740
741 AC_ARG_ENABLE(filter-cutoff-min,
742 [ --enable-filter-cutoff-min
743 Minimum filter cutoff frequency in Hz
744 (default=100.0).],
745 [config_filter_cutoff_min="${enableval}"],
746 [config_filter_cutoff_min="100.0"]
747 )
748 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
749
750 AC_ARG_ENABLE(filter-cutoff-max,
751 [ --enable-filter-cutoff-max
752 Maximum filter cutoff frequency in Hz
753 (default=10000.0).],
754 [config_filter_cutoff_max="${enableval}"],
755 [config_filter_cutoff_max="10000.0"]
756 )
757 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
758
759 AC_ARG_ENABLE(override-cutoff-ctrl,
760 [ --enable-override-cutoff-ctrl
761 Override filter cutoff MIDI controller (default=no).
762 Note: you have to define the MIDI controller number
763 here, it's not a boolean parameter type! If this
764 option is used, controller number given by
765 instrument patch will be ignored and instead this
766 supplied value will be used.],
767 [config_override_cutoff_ctrl="${enableval}"],
768 [config_override_cutoff_ctrl="no"]
769 )
770 if test ! "$config_override_cutoff_ctrl" = "no"; then
771 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
772 fi
773
774 AC_ARG_ENABLE(override-resonance-ctrl,
775 [ --enable-override-resonance-ctrl
776 Override filter resonance MIDI controller
777 (default=no). Note: you have to define the MIDI
778 controller number here, it's not a boolean
779 parameter type! If this option is used, controller
780 number given by instrument patch will be ignored
781 and instead this supplied value will be used.],
782 [config_override_resonance_ctrl="${enableval}"],
783 [config_override_resonance_ctrl="no"]
784 )
785 if test ! "$config_override_resonance_ctrl" = "no"; then
786 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
787 fi
788
789 AC_ARG_ENABLE(override-filter-type,
790 [ --enable-override-filter-type
791 Override filter type (default=no). Options:
792 hp: for highpass
793 bp: for bandpass
794 br: for bandreject
795 lp: for lowpass
796 lpt: for lowpass turbo],
797 [ if test "${enableval}" = "hp" ; then
798 config_override_filter_type="::gig::vcf_type_highpass"
799 elif test "${enableval}" = "bp" ; then
800 config_override_filter_type="::gig::vcf_type_bandpass"
801 elif test "${enableval}" = "br" ; then
802 config_override_filter_type="::gig::vcf_type_bandreject"
803 elif test "${enableval}" = "lp" ; then
804 config_override_filter_type="::gig::vcf_type_lowpass"
805 elif test "${enableval}" = "lpt" ; then
806 config_override_filter_type="::gig::vcf_type_lowpassturbo"
807 elif test ! "${enableval}" = "no"; then
808 AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
809 fi
810 ],
811 [config_override_filter_type="no"]
812 )
813 if test ! "$config_override_filter_type" = "no"; then
814 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
815 fi
816
817 AC_ARG_ENABLE(gs-checksum,
818 [ --enable-gs-checksum
819 Enable Roland General Synth SysEx checksum check
820 (default=no). If this is enabled, all GS SysEx
821 messages which do not provide a correct checksum
822 will be ignored. This is disabled by default as
823 not all devices honor GS checksums.],
824 [config_assert_gs_sysex_checksum="$enableval"],
825 [config_assert_gs_sysex_checksum="no"]
826 )
827 if test "config_assert_gs_sysex_checksum" = "yes"; then
828 AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
829 fi
830
831 AC_ARG_ENABLE(portamento-time-min,
832 [ --enable-portamento-time-min
833 Minimum Portamento time in seconds
834 (default=0.1).],
835 [config_portamento_time_min="${enableval}"],
836 [config_portamento_time_min="0.1"]
837 )
838 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
839
840 AC_ARG_ENABLE(portamento-time-max,
841 [ --enable-portamento-time-max
842 Maximum Portamento time in seconds
843 (default=32).],
844 [config_portamento_time_max="${enableval}"],
845 [config_portamento_time_max="32"]
846 )
847 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
848
849 AC_ARG_ENABLE(portamento-time-default,
850 [ --enable-portamento-time-default
851 Default Portamento time in seconds
852 (default=1).],
853 [config_portamento_time_default="${enableval}"],
854 [config_portamento_time_default="1"]
855 )
856 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
857
858 AC_ARG_ENABLE(signed-triang-algo,
859 [ --enable-signed-triang-algo
860 Signed triangular wave algorithm to be used (e.g. for LFOs).
861 Currently available options:
862 intmath:
863 Uses integer math without any branch will then be
864 converted to floating point value for each sample point.
865 This int->float conversion might hurt on some systems.
866 intmathabs:
867 Similar to intmath but uses abs() function.
868 Depending on compiler and platrofm this could
869 perform better than integer math as it avoids
870 an extra integer multiply instruction.
871 diharmonic:
872 The triangular wave will be approximated by adding two
873 sinusoidials. This solution might especially hurt on
874 systems with weak floating point unit.
875 benchmark (default):
876 This is not an algorithm. Use this option if the
877 appropriate algorithm should be automatically
878 chosen by the configure script by performing a
879 benchmark between the algorithms mentioned above.
880 This will NOT work for cross compilation!],
881 [ if test ! "(" "${enableval}" = "intmath" \
882 -o "${enableval}" = "intmathabs" \
883 -o "${enableval}" = "diharmonic" ")" ; then
884 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
885 else
886 config_signed_triang_algo="${enableval}"
887 fi
888 ],
889 [config_signed_triang_algo="benchmark"]
890 )
891
892 AC_ARG_ENABLE(unsigned-triang-algo,
893 [ --enable-unsigned-triang-algo
894 Unsigned triangular wave algorithm to be used (e.g. for LFOs).
895 Currently available options:
896 intmath:
897 Uses integer math without any branch will then be
898 converted to floating point value for each sample point.
899 This int->float conversion might hurt on some systems.
900 intmathabs:
901 Similar to intmath but uses abs() function.
902 Depending on compiler and platrofm this could
903 perform better than integer math as it avoids
904 an extra integer multiply instruction.
905 diharmonic:
906 The triangular wave will be approximated by adding two
907 sinusoidials. This solution might especially hurt on
908 systems with weak floating point unit.
909 benchmark (default):
910 This is not an algorithm. Use this option if the
911 appropriate algorithm should be automatically
912 chosen by the configure script by performing a
913 benchmark between the algorithms mentioned above.
914 This will NOT work for cross compilation!],
915 [ if test ! "(" "${enableval}" = "intmath" \
916 -o "${enableval}" = "intmathabs" \
917 -o "${enableval}" = "diharmonic" ")" ; then
918 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
919 else
920 config_unsigned_triang_algo="${enableval}"
921 fi
922 ],
923 [config_unsigned_triang_algo="benchmark"]
924 )
925
926 AC_ARG_ENABLE(process-muted-channels,
927 [ --enable-process-muted-channels
928 Enable processing of muted channels (default=no).
929 In that mode all MIDI events in the muted channels
930 will be processed. This will provide information
931 about the active voices in the muted channels and
932 will not discard notes, triggered in mute mode,
933 when the channel is unmuted. But also will reduce
934 the efficiency.],
935 [config_process_muted_channels="$enableval"],
936 [config_process_muted_channels="no"]
937 )
938 if test "$config_process_muted_channels" = "yes"; then
939 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
940 fi
941
942 AC_ARG_ENABLE(process-all-notes-off,
943 [ --disable-process-all-notes-off
944 Disable interpretation of All-Notes-Off MIDI
945 messages (default=on). By default LS will release
946 all voices whenever it receives an All-Notes-Off
947 MIDI message. You can disable this behavior, so
948 that LS simply ignores such messages.],
949 [config_process_all_notes_off="$enableval"],
950 [config_process_all_notes_off="yes"]
951 )
952 if test "$config_process_all_notes_off" = "yes"; then
953 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
954 fi
955
956 AC_ARG_ENABLE(interpolate-volume,
957 [ --disable-interpolate-volume
958 Disable interpolation of volume modulation
959 (default=on). With this enabled, the volume changes
960 generated by for example the envelope generator
961 will be smoother, minimizing the risk for audio
962 clicks. Disable it to reduce CPU usage.],
963 [config_interpolate_volume="$enableval"],
964 [config_interpolate_volume="yes"]
965 )
966 if test "$config_interpolate_volume" = "yes"; then
967 AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
968 fi
969
970 AC_ARG_ENABLE(plugin-dir,
971 [ --enable-plugin-dir
972 Directory where the sampler shall look for potential plugins,
973 that is 3rd party shared libraries that should be loaded by
974 the sampler on startup. By default the sampler will search
975 for plugins in the subdirectory "plugins" below its own
976 library directory.
977 (i.e. /usr/local/lib/linuxsampler/plugins)],
978 [config_plugin_dir="${enableval}"],
979 [config_plugin_dir="${libdir}/linuxsampler/plugins"]
980 )
981 AC_SUBST(config_plugin_dir)
982
983 AC_ARG_ENABLE(default-instruments-db-location,
984 [ --enable-default-instruments-db-location
985 Only when instruments DB feature is enabled: file name
986 which shall be taken as default location of the
987 instruments DB file. This location can still be
988 overridden at runtime with a command line switch.
989 (default: /var/lib/linuxsampler/instruments.db)],
990 [config_default_instruments_db_file="${enableval}"],
991 [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
992 )
993 AC_DEFINE_UNQUOTED(
994 CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
995 "$config_default_instruments_db_file",
996 [Only when instruments DB feature is enabled: default location of the DB file.]
997 )
998 AC_SUBST(config_default_instruments_db_file)
999
1000
1001 ###########################################################################
1002 # Automatic Benchmarks (to detect the best algorithms for the system)
1003
1004 AC_LANG_SAVE
1005
1006 if test "$config_signed_triang_algo" = "benchmark"; then
1007 echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1008 AC_LANG_CPLUSPLUS
1009 AC_TRY_RUN([
1010 #define SIGNED 1
1011 #define SILENT 1
1012 #include "${srcdir}/benchmarks/triang.cpp"
1013 ],
1014 triang_signed=0,
1015 triang_signed=$?,
1016 triang_signed=0
1017 )
1018 if test "$triang_signed" = "2"; then
1019 config_signed_triang_algo="intmath"
1020 echo "integer math"
1021 elif test "$triang_signed" = "3"; then
1022 config_signed_triang_algo="diharmonic"
1023 echo "di harmonics"
1024 elif test "$triang_signed" = "5"; then
1025 config_signed_triang_algo="intmathabs"
1026 echo "integer math using abs()"
1027 else
1028 echo "Benchmark of signed triangular wave algorithms failed!"
1029 echo "Maybe you are doing cross compilation? In that case you have to select"
1030 echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1031 echo "Call './configure --help' for further information or read configure.in."
1032 exit -1;
1033 fi
1034 else
1035 case "$config_signed_triang_algo" in
1036 intmath)
1037 triang_signed=2 ;;
1038 diharmonic)
1039 triang_signed=3 ;;
1040 intmathabs)
1041 triang_signed=5 ;;
1042 esac
1043 fi
1044 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1045
1046 if test "$config_unsigned_triang_algo" = "benchmark"; then
1047 echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1048 AC_LANG_CPLUSPLUS
1049 AC_TRY_RUN([
1050 #define SIGNED 0
1051 #define SILENT 1
1052 #include "${srcdir}/benchmarks/triang.cpp"
1053 ],
1054 triang_unsigned=0,
1055 triang_unsigned=$?,
1056 triang_unsigned=0
1057 )
1058 if test "$triang_unsigned" = "2"; then
1059 config_unsigned_triang_algo="intmath"
1060 echo "integer math"
1061 elif test "$triang_unsigned" = "3"; then
1062 config_unsigned_triang_algo="diharmonic"
1063 echo "di harmonics"
1064 elif test "$triang_unsigned" = "5"; then
1065 config_unsigned_triang_algo="intmathabs"
1066 echo "integer math using abs()"
1067 else
1068 echo "Benchmark of unsigned triangular wave algorithms failed!"
1069 echo "Maybe you are doing cross compilation? In that case you have to select"
1070 echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1071 echo "Call './configure --help' for further information or read configure.in."
1072 exit -1;
1073 fi
1074 else
1075 case "$config_unsigned_triang_algo" in
1076 intmath)
1077 triang_unsigned=2 ;;
1078 diharmonic)
1079 triang_unsigned=3 ;;
1080 intmathabs)
1081 triang_unsigned=5 ;;
1082 esac
1083 fi
1084 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1085
1086 AC_LANG_RESTORE
1087
1088
1089 ###########################################################################
1090 # Create Build Files
1091
1092 AM_CONFIG_HEADER(config.h)
1093 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1094
1095 AC_LANG_CPLUSPLUS
1096 AC_PROG_CXX
1097
1098 # some gcc 4.0 versions need -msse for SSE register allocations
1099 if test "$config_asm" = "yes"; then
1100 if test "$def_arch_x86" = 1; then
1101 CXXFLAGS="$CXXFLAGS -msse"
1102 fi
1103 fi
1104
1105 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1106 # this, the dlfcn.h check in am_prog_libtool may fail.
1107 AC_CHECK_HEADER(stdlib.h)
1108
1109 AC_OUTPUT( \
1110 Makefile \
1111 man/Makefile \
1112 man/linuxsampler.1 \
1113 src/Makefile \
1114 src/db/Makefile \
1115 src/network/Makefile \
1116 src/engines/Makefile \
1117 src/engines/gig/Makefile \
1118 src/engines/common/Makefile \
1119 src/common/Makefile \
1120 src/testcases/Makefile \
1121 src/drivers/Makefile \
1122 src/drivers/audio/Makefile \
1123 src/drivers/midi/Makefile \
1124 src/plugins/Makefile \
1125 linuxsampler.spec \
1126 debian/Makefile \
1127 Artwork/Makefile \
1128 scripts/Makefile \
1129 osx/Makefile \
1130 osx/linuxsampler.xcodeproj/Makefile \
1131 Documentation/Makefile \
1132 Documentation/Engines/Makefile \
1133 Documentation/Engines/gig/Makefile \
1134 linuxsampler.pc \
1135 Doxyfile \
1136 )
1137
1138 # resolve all nested variables in '${config_plugin_dir}'
1139 # (merely for providing a human readable summary below)
1140 while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1141 config_plugin_dir=`eval echo ${config_plugin_dir}`
1142 done
1143
1144
1145 ###########################################################################
1146 # Output All Configuration Options
1147
1148 echo ""
1149 echo "#####################################################################"
1150 echo "# LinuxSampler Configuration #"
1151 echo "#-------------------------------------------------------------------#"
1152 echo "# Assembly Optimizations: ${config_asm}"
1153 echo "# Development Mode: ${config_dev_mode}"
1154 echo "# Debug Level: ${config_debug_level}"
1155 echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1156 echo "# Preload Samples: ${config_preload_samples}"
1157 echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1158 echo "# Maximum Events: ${config_max_events}"
1159 echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1160 echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1161 echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1162 echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1163 echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1164 echo "# Stream Size: ${config_stream_size}"
1165 echo "# Maximum Disk Streams: ${config_max_streams}"
1166 echo "# Maximum Voices: ${config_max_voices}"
1167 echo "# Default Subfragment Size: ${config_subfragment_size}"
1168 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1169 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1170 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1171 echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1172 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1173 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1174 echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1175 echo "# Default Portamento Time: ${config_portamento_time_default} s"
1176 echo "# Force Filter Usage: ${config_force_filter}"
1177 echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1178 echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1179 echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1180 echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1181 echo "# Override Filter Type: ${config_override_filter_type}"
1182 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1183 echo "# Process Muted Channels: ${config_process_muted_channels}"
1184 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1185 echo "# Interpolate Volume: ${config_interpolate_volume}"
1186 echo "# Instruments database support: ${config_instruments_db}"
1187 if test "$config_instruments_db" = "yes"; then
1188 echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1189 fi
1190 echo "# Plugin Path: ${config_plugin_dir}"
1191 echo "#-------------------------------------------------------------------#"
1192 echo "# Read './configure --help' or file 'configure.in' for details. #"
1193 echo "#####################################################################"
1194 echo ""
1195 echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1196 echo ""

  ViewVC Help
Powered by ViewVC