/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Contents of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1741 - (show annotations) (download)
Wed May 28 03:44:46 2008 UTC (15 years, 9 months ago) by schoenebeck
Original Path: linuxsampler/trunk/configure.in
File size: 50032 byte(s)
* configure fix for libtool 2.2
  (patch by Alexis Ballier)

1 AC_INIT(configure.in)
2
3 #------------------------------------------------------------------------------------
4 # LinuxSampler's / liblinuxsampler's "official" release version:
5
6 LINUXSAMPLER_RELEASE_MAJOR=0
7 LINUXSAMPLER_RELEASE_MINOR=5
8 LINUXSAMPLER_RELEASE_BUILD=1.5cvs
9
10 #------------------------------------------------------------------------------------
11 # The following is the libtool / shared library version. This doesn't have to
12 # do anything with the release version. It MUST conform to the following rules:
13 #
14 # 1. Start with version information of `0:0:0' for each libtool library.
15 # 2. Update the version information only immediately before a public release of
16 # your software. More frequent updates are unnecessary, and only guarantee
17 # that the current interface number gets larger faster.
18 # 3. If the library source code has changed at all since the last update, then
19 # increment revision (`c:r:a' becomes `c:r+1:a').
20 # 4. If any interfaces have been added, removed, or changed since the last update,
21 # increment current, and set revision to 0.
22 # 5. If any interfaces have been added since the last public release, then increment
23 # age.
24 # 6. If any interfaces have been removed since the last public release, then set age
25 # to 0.
26
27 LIBLINUXSAMPLER_LT_CURRENT=2
28 LIBLINUXSAMPLER_LT_REVISION=0
29 LIBLINUXSAMPLER_LT_AGE=1
30 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31
32 #------------------------------------------------------------------------------------
33 # the LSCP specification version this LinuSampler release complies with:
34
35 LSCP_RELEASE_MAJOR=1
36 LSCP_RELEASE_MINOR=4
37
38 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40
41 AC_PROG_CXX
42 AM_PROG_LIBTOOL
43
44 AC_SUBST(SHLIB_VERSION_ARG)
45 AC_SUBST(SHARED_VERSION_INFO)
46
47 AC_C_BIGENDIAN
48 AC_CANONICAL_SYSTEM
49
50 AC_SUBST(target)
51 AC_SUBST(target_alias)
52 AC_SUBST(target_cpu)
53 AC_SUBST(target_os)
54 AC_SUBST(target_vendor)
55
56 PKG_PROG_PKG_CONFIG
57
58 ###########################################################################
59 # General Checks
60
61 AC_MSG_CHECKING([whether x86 architecture])
62 def_arch_x86=0
63 case $target_cpu in
64 "i386" | "i486" | "i586" | "i686" | "i786")
65 echo "yes"
66 def_arch_x86=1;;
67 *)
68 echo "no";;
69 esac
70 AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
71
72 # determine the right gcc switch for CPU specific optimizations
73 # (only if the user did not provide one)
74 CXX_CPU_SWITCH=
75 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
76 if test "$def_arch_x86" = 1; then
77 CXX_CPU_SWITCH="-march=$target_cpu"
78 elif test "$target_cpu" = "ppc"; then
79 CXX_CPU_SWITCH="-arch=$target_cpu"
80 fi
81 fi
82 AC_SUBST([CXX_CPU_SWITCH])
83
84 # check if we're on MS Windows
85 AC_CHECK_HEADERS(
86 mmsystem.h,
87 have_windows=1,
88 have_windows=0
89 )
90 AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
91
92 AC_MSG_CHECKING([whether UNIX98 compatible])
93 AC_LANG_SAVE
94 AC_LANG_C
95 AC_TRY_RUN([
96 #ifndef _GNU_SOURCE
97 #define _GNU_SOURCE 1
98 #endif
99 #include <features.h>
100 void main(void) {
101 #if _XOPEN_SOURCE >= 500
102 exit(0); /* UNIX98 compatible */
103 #else
104 exit(-1); /* not UNIX98 compatible */
105 #endif
106 }
107 ],
108 have_unix98="yes",
109 have_unix98="no",
110 have_unix98="no"
111 )
112 AC_LANG_RESTORE
113 AC_MSG_RESULT([$have_unix98])
114 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
115 if test "x$HAVE_UNIX98" = "x"; then
116 echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
117 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
118 echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
119 echo "have a UNIX98 compatible system."
120 exit -1;
121 fi
122 fi
123
124 # check for <features.h>
125 AC_CHECK_HEADERS(features.h)
126
127 # test for POSIX thread library
128 m4_ifdef([m4_include(m4/pthread.m4)],,
129 [sinclude([m4/pthread.m4])])
130 ACX_PTHREAD
131 LIBS="$PTHREAD_LIBS $LIBS"
132 CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
133 CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
134 CC="$PTHREAD_CC"
135
136 # check for a bug in NPTL-enabled glibc
137 # (see Gentoo bug report #194076)
138 AC_ARG_ENABLE(nptl-bug-check,
139 [ --disable-nptl-bug-check
140 Disable check for a bug in certain NPTL-enabled
141 glibc versions that caused crashs.],
142 [config_check_nptl_bug="$enableval"],
143 [config_check_nptl_bug="yes"]
144 )
145 if test "$config_check_nptl_bug" = "yes"; then
146 m4_ifdef([m4_include(m4/nptl_bug.m4)],,
147 [sinclude([m4/nptl_bug.m4])])
148 ACX_NPTL_GLIBC_BUG([
149 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
150 echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
151 echo "probably crash due to this. Please report us the system you are"
152 echo "using and/or file a bug report to the bug tracking system of"
153 echo "your distribution."
154 echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
155 echo "well, you can try to circumvent this problem for now by setting"
156 echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
157 echo "should cause this test to pass."
158 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
159 AC_MSG_ERROR([possibly NPTL glibc bug detected])
160 ])
161 else
162 echo "NPTL glibc bug check disabled"
163 fi
164
165
166
167 ###########################################################################
168 # Checks for available audio and MIDI systems / drivers
169 # (we throw an error if there's not at least one system for audio output and MIDI input available)
170
171 have_midi_input_driver="false"
172 have_audio_output_driver="false"
173
174 # ALSA
175 AC_ARG_ENABLE(alsa-driver,
176 [ --disable-alsa-driver
177 Disable support for the Advanced Linux Sound
178 Architecture (ALSA).],
179 [config_alsa_driver="$enableval"],
180 [config_alsa_driver="yes"]
181 )
182 have_alsa=0
183 if test "$config_alsa_driver" = "yes"; then
184 AC_CHECK_HEADER(alsa/asoundlib.h,
185 AC_CHECK_LIB(asound, main,
186 have_alsa=1
187 ,
188 have_alsa=0
189 )
190 ,
191 have_alsa=0
192 )
193 if test "$have_alsa" = "1"; then
194 have_midi_input_driver="true"
195 have_audio_output_driver="true";
196 fi
197
198 echo -n "checking Alsa version... "
199 AC_LANG_SAVE
200 AC_LANG_C
201 AC_TRY_RUN([
202 #include <alsa/asoundlib.h>
203 void main(void) {
204 /* ensure backward compatibility */
205 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
206 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
207 #endif
208 exit(SND_LIB_MAJOR);
209 }
210 ],
211 alsa_major=0,
212 alsa_major=$?,
213 alsa_major=0
214 )
215 AC_TRY_RUN([
216 #include <alsa/asoundlib.h>
217 void main(void) {
218 /* ensure backward compatibility */
219 #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
220 #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
221 #endif
222 exit(SND_LIB_MINOR);
223 }
224 ],
225 alsa_minor=0,
226 alsa_minor=$?,
227 alsa_minor=0
228 )
229 AC_TRY_RUN([
230 #include <alsa/asoundlib.h>
231 void main(void) {
232 /* ensure backward compatibility */
233 #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
234 #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
235 #endif
236 exit(SND_LIB_SUBMINOR);
237 }
238 ],
239 alsa_subminor=0,
240 alsa_subminor=$?,
241 alsa_subminor=0
242 )
243 AC_LANG_RESTORE
244 echo "$alsa_major.$alsa_minor.$alsa_subminor";
245 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
246 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
247 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
248 else
249 echo "ALSA support disabled by configure script parameter"
250 fi
251 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
252 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
253
254 # JACK
255 AC_ARG_ENABLE(jack-driver,
256 [ --disable-jack-driver
257 Disable support for the Jack Audio Connection Kit
258 (JACK).],
259 [config_jack_driver="$enableval"],
260 [config_jack_driver="yes"]
261 )
262 have_jack=0
263 if test "$config_jack_driver" = "yes"; then
264 PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
265 if test $have_jack = "1"; then
266 AC_SUBST(JACK_LIBS)
267 AC_SUBST(JACK_CFLAGS)
268 AC_CHECK_LIB(jack, jack_client_name_size, [AC_DEFINE(HAVE_JACK_CLIENT_NAME_SIZE, 1, [Define to 1 if you have the `jack_client_name_size' function.])], , $JACK_LIBS)
269 have_audio_output_driver="true";
270 fi
271 else
272 echo "JACK support disabled by configure script parameter"
273 fi
274 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
275 AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
276
277 # JACK MIDI
278 have_jack_midi=0
279 if test $have_jack = "1"; then
280 linuxsampler_save_CFLAGS=$CFLAGS
281 linuxsampler_save_LIBS=$LIBS
282 CFLAGS="$JACK_CFLAGS $CFLAGS"
283 LIBS="$JACK_LIBS $LIBS"
284 AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
285 if test $have_jack_midi = "1"; then
286 AC_CHECK_FUNCS(jack_midi_get_event_count)
287 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
288 jack_midi_clear_buffer(0, 0);
289 ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
290 [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
291 have_midi_input_driver="true"
292 fi
293 CFLAGS=$linuxsampler_save_CFLAGS
294 LIBS=$linuxsampler_save_LIBS
295 fi
296 AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
297 AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
298 [Define to 1 if you have JACK with MIDI support installed.])
299
300 # ARTS
301 AC_ARG_ENABLE(arts-driver,
302 [ --disable-arts-driver
303 Disable support for the Analogue Realtime System
304 (aRts).],
305 [config_arts_driver="$enableval"],
306 [config_arts_driver="yes"]
307 )
308 have_arts=0
309 if test "$config_arts_driver" = "yes"; then
310 m4_ifdef([m4_include(m4/arts.m4)],,
311 [sinclude([m4/arts.m4])])
312 AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
313 if test "$have_arts" = "1"; then
314 have_audio_output_driver="true"
315 fi
316 else
317 echo "ARTS support disabled by configure script parameter"
318 fi
319 AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
320 AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
321
322 # ASIO AUDIO (Win32)
323 AC_ARG_ENABLE(asiosdk-dir,
324 [ --enable-asiosdk-dir
325 Directory where the ASIO SDK is located, this automatically
326 enables the compilation of the ASIO audio output driver.],
327 [config_asiosdk_dir="${enableval}"],
328 [config_asiosdk_dir="."]
329 )
330 AC_SUBST(config_asiosdk_dir)
331
332 AC_ARG_ENABLE(asio-driver,
333 [ --disable-asio-driver
334 Disable support for the Windows ASIO driver.],
335 [config_asio_driver="$enableval"],
336 [config_asio_driver="yes"]
337 )
338 have_asio=0
339 ASIOSDK_BASEDIR=
340 if test "$config_asio_driver" = "yes"; then
341 asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
342 echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
343 if test -e $asiosdk_headerfile ; then
344 echo yes
345 have_asio=1
346 ASIOSDK_BASEDIR="$config_asiosdk_dir"
347 else
348 echo no
349 have_asio=0
350 fi
351 if test "$have_asio" = "1"; then
352 have_audio_output_driver="true"
353 fi
354 else
355 echo "Windows ASIO support disabled by configure script parameter"
356 fi
357 AC_SUBST(ASIOSDK_BASEDIR)
358 AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
359 AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
360
361 # MidiShare (Linux, OS X, Windows)
362 AC_ARG_ENABLE(midishare-driver,
363 [ --disable-midishare-driver
364 Disable support for the MidiShare system.],
365 [config_midishare_driver="$enableval"],
366 [config_midishare_driver="yes"]
367 )
368 have_midishare=0
369 if test "$config_midishare_driver" = "yes"; then
370 AC_CHECK_HEADER(MidiShare.h,
371 AC_CHECK_LIB(MidiShare, MidiCountEvs,
372 have_midishare=1,
373 have_midishare=0
374 )
375 ,
376 have_midishare=0
377 )
378 if test "$have_midishare" = "1"; then
379 have_midi_input_driver="true"
380 fi
381 else
382 echo "MidiShare support disabled by configure script parameter"
383 fi
384 AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
385 AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
386
387 # CoreMIDI (OS X)
388 AC_ARG_ENABLE(coremidi-driver,
389 [ --disable-coremidi-driver
390 Disable support for the Apple CoreMIDI system.],
391 [config_coremidi_driver="$enableval"],
392 [config_coremidi_driver="yes"]
393 )
394 have_coremidi=0
395 if test "$config_coremidi_driver" = "yes"; then
396 AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
397 have_coremidi=1,
398 have_coremidi=0
399 )
400 if test "$have_coremidi" = "1"; then
401 have_midi_input_driver="true"
402 fi
403 else
404 echo "CoreMIDI support disabled by configure script parameter"
405 fi
406 AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
407 AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
408
409 # MME MIDI (Win32)
410 AC_ARG_ENABLE(mmemidi-driver,
411 [ --disable-mmemidi-driver
412 Disable support for the Windows MME MIDI system.],
413 [config_mmemidi_driver="$enableval"],
414 [config_mmemidi_driver="yes"]
415 )
416 have_mmemidi=0
417 if test "$config_mmemidi_driver" = "yes"; then
418 AC_CHECK_HEADERS(mmsystem.h,
419 have_mmemidi=1,
420 have_mmemidi=0
421 )
422 if test "$have_mmemidi" = "1"; then
423 have_midi_input_driver="true"
424 fi
425 else
426 echo "MME MIDI support disabled by configure script parameter"
427 fi
428 AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
429 AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
430
431 # have we found at least one MIDI input and one audio output driver ?
432 if test "$have_midi_input_driver" = "false"; then
433 echo "No supported MIDI input system found!"
434 echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
435 echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
436 echo "If you think you have one of those available on your system, make sure you"
437 echo "also have the respective development (header) files installed."
438 exit -1;
439 fi
440 if test "$have_audio_output_driver" = "false"; then
441 echo "No supported audio output system found!"
442 echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
443 echo "driver at the moment!"
444 exit -1;
445 fi
446
447
448
449 ###########################################################################
450 # Checks for various DLL libraries
451
452 # Check presence of libgig
453 libgig_version="3.2.1"
454 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
455 if test "$HAVE_GIG" = "false"; then
456 echo "Required libgig version not found!"
457 echo "You need to have libgig version ${libgig_version} installed!"
458 exit -1;
459 else
460 echo "yes, found libgig $libgig_version"
461 fi
462 AC_SUBST(GIG_CFLAGS)
463 AC_SUBST(GIG_LIBS)
464
465 # Instruments DB feature (requires SQLite 3.3)
466 AC_ARG_ENABLE(instruments-db,
467 [ --disable-instruments-db
468 Disable compilation of the sampler's instruments
469 database feature. You need to have SQLite 3.3
470 or younger installed for this feature.],
471 [config_instruments_db="$enableval"],
472 [config_instruments_db="yes"]
473 )
474 HAVE_SQLITE3=0;
475 if test "$config_instruments_db" = "yes"; then
476 # Check presence of sqlite3
477 sqlite_version="3.3"
478 PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
479 AC_SUBST(SQLITE3_LIBS)
480 AC_SUBST(SQLITE3_CFLAGS)
481 if test $HAVE_SQLITE3 = false; then
482 HAVE_SQLITE3=0
483 config_instruments_db="no"
484 echo "*** Required sqlite version not found!"
485 echo "*** You need to have sqlite version ${sqlite_version} or higher"
486 echo "*** for instruments database support to be enabled."
487 echo "*** Support for instruments DB will be disabled!"
488 else
489 HAVE_SQLITE3=1
490 fi
491 else
492 echo "Instruments DB feature disabled by configure script parameter"
493 fi
494 AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
495 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
496
497
498
499 ###########################################################################
500 # Handle Configuration Options
501
502 # TODO: should we use AC_ARG_VAR(variable, description) instead?
503
504 AC_ARG_ENABLE(asm,
505 [ --disable-asm
506 Enable hand-crafted assembly optimizations
507 (default=on). LinuxSampler provides CPU specific
508 assembly optimizations. This is currently limited
509 to just enter a fast (denormal) FPU mode on x86
510 platforms. There are currently no synthesis core
511 assembly optimizations anymore since LS 0.4.0],
512 [config_asm="$enableval"],
513 [config_asm="yes"]
514 )
515 if test "$config_asm" = "yes"; then
516 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
517 fi
518
519 AC_ARG_ENABLE(dev-mode,
520 [ --enable-dev-mode
521 Enable development mode (default=off). In that mode
522 we do some extra sanity checks here and there.
523 This helps to spot possible problems, but reduces
524 efficiency a bit],
525 [config_dev_mode="$enableval"],
526 [config_dev_mode="no"]
527 )
528 if test "$config_dev_mode" = "yes"; then
529 AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
530 fi
531
532 AC_ARG_ENABLE(debug-level,
533 [ --enable-debug-level
534 Specify verbosity of console messages (default=1).
535 The higher the value, the higher will be verbosity.
536 A value of 0 means no console output at all.
537 There's not really an upper limit but the usual
538 level of all messages is currently somewhere less
539 than 10.],
540 [config_debug_level="${enableval}"],
541 [config_debug_level="1"]
542 )
543 AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
544
545 AC_ARG_ENABLE(rt-exceptions,
546 [ --enable-rt-exceptions
547 Enable exceptions in the realtime thread
548 (default=no). If this is enabled, exceptions will
549 be thrown on critical errors in the realtime
550 context as well. Otherwise if disabled
551 segmentation faults will be forced by the
552 application on critical errors.],
553 [config_rt_exceptions="$enableval"],
554 [config_rt_exceptions="no"]
555 )
556 if test "$config_rt_exceptions" = "yes"; then
557 AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
558 fi
559
560 AC_ARG_ENABLE(pthread-testcancel,
561 [ --enable-pthread-testcancel
562 Enable pthread_testcancel() calls and avoid asynchronous
563 cancel of pthreads (default=no).],
564 [config_pthread_testcancel="$enableval"],
565 [config_pthread_testcancel="no"]
566 )
567 if test "$config_pthread_testcancel" = "yes"; then
568 AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
569 fi
570
571 AC_ARG_ENABLE(preload-samples,
572 [ --enable-preload-samples
573 Due to seeking and latency issues with hard drives
574 we have to cache a small part of samples' head in
575 RAM (default=32768). The higher this value the
576 more memory will be occupied for each sample, but
577 the safer this will be in regards of possible
578 droputs. A 'good' value depends on the running
579 system and usage dependant factors.],
580 [config_preload_samples="${enableval}"],
581 [config_preload_samples="32768"]
582 )
583 AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
584
585 AC_ARG_ENABLE(max-pitch,
586 [ --enable-max-pitch
587 Specify the maximum allowed pitch value in octaves
588 (default=4). To lower memory usage you might want
589 set a smaller value.],
590 [config_max_pitch="${enableval}"],
591 [config_max_pitch="4"]
592 )
593 AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
594
595 AC_ARG_ENABLE(max-events,
596 [ --enable-max-events
597 Specify the maximum allowed amount of events to be
598 processed per fragment (default=1024).],
599 [config_max_events="${enableval}"],
600 [config_max_events="1024"]
601 )
602 AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
603
604 AC_ARG_ENABLE(eg-bottom,
605 [ --enable-eg-bottom
606 Bottom limit of envelope generators
607 (default=0.001). Certain kinds of curve types like
608 exponential curves converge against 0 but never
609 reach 0. So we have to define a certain low value
610 after which we should consider all smaller values
611 to be 'almost zero'. The smaller this value, the
612 longer will voices survive in EG's release stage
613 and thus waste voices. If this value is too high
614 will cause click sounds though.],
615 [config_eg_bottom="${enableval}"],
616 [config_eg_bottom="0.001"]
617 )
618 AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
619
620 AC_ARG_ENABLE(eg-min-release-time,
621 [ --enable-eg-min-release-time
622 Specify the lowest allowed release time in seconds
623 (default=0.0025). This value will also be used to
624 ramp down voices on voice stealing. This value
625 should always be less than the period time of the
626 used audio driver, as in case of voice stealing
627 the killed voice needs to be completely ramped
628 down in the same fragment.],
629 [config_eg_min_release_time="${enableval}"],
630 [config_eg_min_release_time="0.0025"]
631 )
632 AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
633
634 AC_ARG_ENABLE(refill-streams,
635 [ --enable-refill-streams
636 Number of streams that should be refilled in each
637 disk thread cycle (default=4).],
638 [config_refill_streams="${enableval}"],
639 [config_refill_streams="4"]
640 )
641 AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
642
643 AC_ARG_ENABLE(stream-min-refill,
644 [ --enable-stream-min-refill
645 Minimum refill size for disk streams (default=1024).
646 The disk thread will go to sleep for a while if no
647 stream had to be refilled more than this value in
648 a disk thread cycle.],
649 [config_stream_min_refill="${enableval}"],
650 [config_stream_min_refill="1024"]
651 )
652 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
653
654 AC_ARG_ENABLE(stream-max-refill,
655 [ --enable-stream-max-refill
656 Maximum refill size for disk streams
657 (default=65536). The disk thread will refill
658 each stream only by a size of this value per
659 disk thread cycle.],
660 [config_stream_max_refill="${enableval}"],
661 [config_stream_max_refill="65536"]
662 )
663 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
664
665 AC_ARG_ENABLE(stream-size,
666 [ --enable-stream-size
667 Size of each stream's ring buffer in sample points
668 (default=262144).],
669 [config_stream_size="${enableval}"],
670 [config_stream_size="262144"]
671 )
672 AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
673
674 AC_ARG_ENABLE(max-streams,
675 [ --enable-max-streams
676 Maximum amount of disk streams (default=90). This
677 value should always be higher than the maximum
678 amount of voices.],
679 [config_max_streams="${enableval}"],
680 [config_max_streams="90"]
681 )
682 AC_DEFINE_UNQUOTED(CONFIG_MAX_STREAMS, $config_max_streams, [Define max. streams.])
683
684 AC_ARG_ENABLE(max-voices,
685 [ --enable-max-voices
686 Maximum amount of voices (default=64). This value
687 should always be lower than the maximum amount of
688 disk streams.],
689 [config_max_voices="${enableval}"],
690 [config_max_voices="64"]
691 )
692 AC_DEFINE_UNQUOTED(CONFIG_MAX_VOICES, $config_max_voices, [Define max. voices.])
693
694 AC_ARG_ENABLE(subfragment-size,
695 [ --enable-subfragment-size
696 Every audio fragment will be splitted into
697 subfragments. Where each subfragment renders
698 audio with constant synthesis parameters. This is
699 done for efficiency reasons. This parameter
700 defines the default size of a subfragment in
701 sample points. A large value means less CPU time
702 whereas a low value means better audio quality
703 (default=32).],
704 [config_subfragment_size="${enableval}"],
705 [config_subfragment_size="32"]
706 )
707 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
708
709 AC_ARG_ENABLE(global-attenuation-default,
710 [ --enable-global-attenuation-default
711 To prevent clipping all samples will be lowered
712 in amplitude by this given default factor (can
713 be overridden at runtime).
714 (default=0.35)],
715 [config_global_attenuation_default="${enableval}"],
716 [config_global_attenuation_default="0.35"]
717 )
718 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
719
720 AC_ARG_ENABLE(voice-steal-algo,
721 [ --enable-voice-steal-algo
722 Voice stealing algorithm to be used. Currently
723 available options:
724 none:
725 Disable voice stealing completely.
726 oldestvoiceonkey (default):
727 Try to kill a voice on the same key first,
728 if no success, proceed with the oldest key.
729 oldestkey:
730 Try to kill a voice from the oldest active
731 key.],
732 [ if test ! "(" "${enableval}" = "none" \
733 -o "${enableval}" = "oldestvoiceonkey" \
734 -o "${enableval}" = "oldestkey" ")" ; then
735 AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
736 else
737 config_voice_steal_algo="${enableval}"
738 fi
739 ],
740 [config_voice_steal_algo="oldestvoiceonkey"]
741 )
742 AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
743
744 AC_ARG_ENABLE(sysex-buffer-size,
745 [ --enable-sysex-buffer-size
746 System Exclusive Message buffer size in kB
747 (default=2048).],
748 [config_sysex_buffer_size="${enableval}"],
749 [config_sysex_buffer_size="2048"]
750 )
751 AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
752
753 AC_ARG_ENABLE(force-filter,
754 [ --enable-force-filter
755 If enabled will force filter to be used even if
756 no usage was define in instrument patch files.
757 (default=no).],
758 [config_force_filter="$enableval"],
759 [config_force_filter="no"]
760 )
761 if test "$config_force_filter" = "yes"; then
762 AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
763 fi
764
765 AC_ARG_ENABLE(filter-cutoff-min,
766 [ --enable-filter-cutoff-min
767 Minimum filter cutoff frequency in Hz
768 (default=100.0).],
769 [config_filter_cutoff_min="${enableval}"],
770 [config_filter_cutoff_min="100.0"]
771 )
772 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
773
774 AC_ARG_ENABLE(filter-cutoff-max,
775 [ --enable-filter-cutoff-max
776 Maximum filter cutoff frequency in Hz
777 (default=10000.0).],
778 [config_filter_cutoff_max="${enableval}"],
779 [config_filter_cutoff_max="10000.0"]
780 )
781 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
782
783 AC_ARG_ENABLE(override-cutoff-ctrl,
784 [ --enable-override-cutoff-ctrl
785 Override filter cutoff MIDI controller (default=no).
786 Note: you have to define the MIDI controller number
787 here, it's not a boolean parameter type! If this
788 option is used, controller number given by
789 instrument patch will be ignored and instead this
790 supplied value will be used.],
791 [config_override_cutoff_ctrl="${enableval}"],
792 [config_override_cutoff_ctrl="no"]
793 )
794 if test ! "$config_override_cutoff_ctrl" = "no"; then
795 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
796 fi
797
798 AC_ARG_ENABLE(override-resonance-ctrl,
799 [ --enable-override-resonance-ctrl
800 Override filter resonance MIDI controller
801 (default=no). Note: you have to define the MIDI
802 controller number here, it's not a boolean
803 parameter type! If this option is used, controller
804 number given by instrument patch will be ignored
805 and instead this supplied value will be used.],
806 [config_override_resonance_ctrl="${enableval}"],
807 [config_override_resonance_ctrl="no"]
808 )
809 if test ! "$config_override_resonance_ctrl" = "no"; then
810 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
811 fi
812
813 AC_ARG_ENABLE(override-filter-type,
814 [ --enable-override-filter-type
815 Override filter type (default=no). Options:
816 hp: for highpass
817 bp: for bandpass
818 br: for bandreject
819 lp: for lowpass
820 lpt: for lowpass turbo],
821 [ if test "${enableval}" = "hp" ; then
822 config_override_filter_type="::gig::vcf_type_highpass"
823 elif test "${enableval}" = "bp" ; then
824 config_override_filter_type="::gig::vcf_type_bandpass"
825 elif test "${enableval}" = "br" ; then
826 config_override_filter_type="::gig::vcf_type_bandreject"
827 elif test "${enableval}" = "lp" ; then
828 config_override_filter_type="::gig::vcf_type_lowpass"
829 elif test "${enableval}" = "lpt" ; then
830 config_override_filter_type="::gig::vcf_type_lowpassturbo"
831 elif test ! "${enableval}" = "no"; then
832 AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
833 fi
834 ],
835 [config_override_filter_type="no"]
836 )
837 if test ! "$config_override_filter_type" = "no"; then
838 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
839 fi
840
841 AC_ARG_ENABLE(gs-checksum,
842 [ --enable-gs-checksum
843 Enable Roland General Synth SysEx checksum check
844 (default=no). If this is enabled, all GS SysEx
845 messages which do not provide a correct checksum
846 will be ignored. This is disabled by default as
847 not all devices honor GS checksums.],
848 [config_assert_gs_sysex_checksum="$enableval"],
849 [config_assert_gs_sysex_checksum="no"]
850 )
851 if test "config_assert_gs_sysex_checksum" = "yes"; then
852 AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
853 fi
854
855 AC_ARG_ENABLE(portamento-time-min,
856 [ --enable-portamento-time-min
857 Minimum Portamento time in seconds
858 (default=0.1).],
859 [config_portamento_time_min="${enableval}"],
860 [config_portamento_time_min="0.1"]
861 )
862 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
863
864 AC_ARG_ENABLE(portamento-time-max,
865 [ --enable-portamento-time-max
866 Maximum Portamento time in seconds
867 (default=32).],
868 [config_portamento_time_max="${enableval}"],
869 [config_portamento_time_max="32"]
870 )
871 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
872
873 AC_ARG_ENABLE(portamento-time-default,
874 [ --enable-portamento-time-default
875 Default Portamento time in seconds
876 (default=1).],
877 [config_portamento_time_default="${enableval}"],
878 [config_portamento_time_default="1"]
879 )
880 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
881
882 AC_ARG_ENABLE(signed-triang-algo,
883 [ --enable-signed-triang-algo
884 Signed triangular wave algorithm to be used (e.g. for LFOs).
885 Currently available options:
886 intmath:
887 Uses integer math without any branch will then be
888 converted to floating point value for each sample point.
889 This int->float conversion might hurt on some systems.
890 intmathabs:
891 Similar to intmath but uses abs() function.
892 Depending on compiler and platrofm this could
893 perform better than integer math as it avoids
894 an extra integer multiply instruction.
895 diharmonic:
896 The triangular wave will be approximated by adding two
897 sinusoidials. This solution might especially hurt on
898 systems with weak floating point unit.
899 benchmark (default):
900 This is not an algorithm. Use this option if the
901 appropriate algorithm should be automatically
902 chosen by the configure script by performing a
903 benchmark between the algorithms mentioned above.
904 This will NOT work for cross compilation!],
905 [ if test ! "(" "${enableval}" = "intmath" \
906 -o "${enableval}" = "intmathabs" \
907 -o "${enableval}" = "diharmonic" ")" ; then
908 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
909 else
910 config_signed_triang_algo="${enableval}"
911 fi
912 ],
913 [config_signed_triang_algo="benchmark"]
914 )
915
916 AC_ARG_ENABLE(unsigned-triang-algo,
917 [ --enable-unsigned-triang-algo
918 Unsigned triangular wave algorithm to be used (e.g. for LFOs).
919 Currently available options:
920 intmath:
921 Uses integer math without any branch will then be
922 converted to floating point value for each sample point.
923 This int->float conversion might hurt on some systems.
924 intmathabs:
925 Similar to intmath but uses abs() function.
926 Depending on compiler and platrofm this could
927 perform better than integer math as it avoids
928 an extra integer multiply instruction.
929 diharmonic:
930 The triangular wave will be approximated by adding two
931 sinusoidials. This solution might especially hurt on
932 systems with weak floating point unit.
933 benchmark (default):
934 This is not an algorithm. Use this option if the
935 appropriate algorithm should be automatically
936 chosen by the configure script by performing a
937 benchmark between the algorithms mentioned above.
938 This will NOT work for cross compilation!],
939 [ if test ! "(" "${enableval}" = "intmath" \
940 -o "${enableval}" = "intmathabs" \
941 -o "${enableval}" = "diharmonic" ")" ; then
942 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
943 else
944 config_unsigned_triang_algo="${enableval}"
945 fi
946 ],
947 [config_unsigned_triang_algo="benchmark"]
948 )
949
950 AC_ARG_ENABLE(process-muted-channels,
951 [ --enable-process-muted-channels
952 Enable processing of muted channels (default=no).
953 In that mode all MIDI events in the muted channels
954 will be processed. This will provide information
955 about the active voices in the muted channels and
956 will not discard notes, triggered in mute mode,
957 when the channel is unmuted. But also will reduce
958 the efficiency.],
959 [config_process_muted_channels="$enableval"],
960 [config_process_muted_channels="no"]
961 )
962 if test "$config_process_muted_channels" = "yes"; then
963 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
964 fi
965
966 AC_ARG_ENABLE(process-all-notes-off,
967 [ --disable-process-all-notes-off
968 Disable interpretation of All-Notes-Off MIDI
969 messages (default=on). By default LS will release
970 all voices whenever it receives an All-Notes-Off
971 MIDI message. You can disable this behavior, so
972 that LS simply ignores such messages.],
973 [config_process_all_notes_off="$enableval"],
974 [config_process_all_notes_off="yes"]
975 )
976 if test "$config_process_all_notes_off" = "yes"; then
977 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
978 fi
979
980 AC_ARG_ENABLE(interpolate-volume,
981 [ --disable-interpolate-volume
982 Disable interpolation of volume modulation
983 (default=on). With this enabled, the volume changes
984 generated by for example the envelope generator
985 will be smoother, minimizing the risk for audio
986 clicks. Disable it to reduce CPU usage.],
987 [config_interpolate_volume="$enableval"],
988 [config_interpolate_volume="yes"]
989 )
990 if test "$config_interpolate_volume" = "yes"; then
991 AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
992 fi
993
994 AC_ARG_ENABLE(plugin-dir,
995 [ --enable-plugin-dir
996 Directory where the sampler shall look for potential plugins,
997 that is 3rd party shared libraries that should be loaded by
998 the sampler on startup. By default the sampler will search
999 for plugins in the subdirectory "plugins" below its own
1000 library directory.
1001 (i.e. /usr/local/lib/linuxsampler/plugins)],
1002 [config_plugin_dir="${enableval}"],
1003 [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1004 )
1005 AC_SUBST(config_plugin_dir)
1006
1007 AC_ARG_ENABLE(default-instruments-db-location,
1008 [ --enable-default-instruments-db-location
1009 Only when instruments DB feature is enabled: file name
1010 which shall be taken as default location of the
1011 instruments DB file. This location can still be
1012 overridden at runtime with a command line switch.
1013 (default: /var/lib/linuxsampler/instruments.db)],
1014 [config_default_instruments_db_file="${enableval}"],
1015 [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1016 )
1017 AC_DEFINE_UNQUOTED(
1018 CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1019 "$config_default_instruments_db_file",
1020 [Only when instruments DB feature is enabled: default location of the DB file.]
1021 )
1022 AC_SUBST(config_default_instruments_db_file)
1023
1024
1025 ###########################################################################
1026 # Automatic Benchmarks (to detect the best algorithms for the system)
1027
1028 AC_LANG_SAVE
1029
1030 if test "$config_signed_triang_algo" = "benchmark"; then
1031 echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1032 AC_LANG_CPLUSPLUS
1033 AC_TRY_RUN([
1034 #define SIGNED 1
1035 #define SILENT 1
1036 #include "${srcdir}/benchmarks/triang.cpp"
1037 ],
1038 triang_signed=0,
1039 triang_signed=$?,
1040 triang_signed=0
1041 )
1042 if test "$triang_signed" = "2"; then
1043 config_signed_triang_algo="intmath"
1044 echo "integer math"
1045 elif test "$triang_signed" = "3"; then
1046 config_signed_triang_algo="diharmonic"
1047 echo "di harmonics"
1048 elif test "$triang_signed" = "5"; then
1049 config_signed_triang_algo="intmathabs"
1050 echo "integer math using abs()"
1051 else
1052 echo "Benchmark of signed triangular wave algorithms failed!"
1053 echo "Maybe you are doing cross compilation? In that case you have to select"
1054 echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1055 echo "Call './configure --help' for further information or read configure.in."
1056 exit -1;
1057 fi
1058 else
1059 case "$config_signed_triang_algo" in
1060 intmath)
1061 triang_signed=2 ;;
1062 diharmonic)
1063 triang_signed=3 ;;
1064 intmathabs)
1065 triang_signed=5 ;;
1066 esac
1067 fi
1068 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1069
1070 if test "$config_unsigned_triang_algo" = "benchmark"; then
1071 echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1072 AC_LANG_CPLUSPLUS
1073 AC_TRY_RUN([
1074 #define SIGNED 0
1075 #define SILENT 1
1076 #include "${srcdir}/benchmarks/triang.cpp"
1077 ],
1078 triang_unsigned=0,
1079 triang_unsigned=$?,
1080 triang_unsigned=0
1081 )
1082 if test "$triang_unsigned" = "2"; then
1083 config_unsigned_triang_algo="intmath"
1084 echo "integer math"
1085 elif test "$triang_unsigned" = "3"; then
1086 config_unsigned_triang_algo="diharmonic"
1087 echo "di harmonics"
1088 elif test "$triang_unsigned" = "5"; then
1089 config_unsigned_triang_algo="intmathabs"
1090 echo "integer math using abs()"
1091 else
1092 echo "Benchmark of unsigned triangular wave algorithms failed!"
1093 echo "Maybe you are doing cross compilation? In that case you have to select"
1094 echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1095 echo "Call './configure --help' for further information or read configure.in."
1096 exit -1;
1097 fi
1098 else
1099 case "$config_unsigned_triang_algo" in
1100 intmath)
1101 triang_unsigned=2 ;;
1102 diharmonic)
1103 triang_unsigned=3 ;;
1104 intmathabs)
1105 triang_unsigned=5 ;;
1106 esac
1107 fi
1108 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1109
1110 AC_LANG_RESTORE
1111
1112
1113 ###########################################################################
1114 # Create Build Files
1115
1116 AM_CONFIG_HEADER(config.h)
1117 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1118
1119 AC_LANG_CPLUSPLUS
1120
1121 # some gcc 4.0 versions need -msse for SSE register allocations
1122 if test "$config_asm" = "yes"; then
1123 if test "$def_arch_x86" = 1; then
1124 CXXFLAGS="$CXXFLAGS -msse"
1125 fi
1126 fi
1127
1128 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1129 # this, the dlfcn.h check in am_prog_libtool may fail.
1130 AC_CHECK_HEADER(stdlib.h)
1131
1132 AC_OUTPUT( \
1133 Makefile \
1134 man/Makefile \
1135 man/linuxsampler.1 \
1136 src/Makefile \
1137 src/db/Makefile \
1138 src/network/Makefile \
1139 src/engines/Makefile \
1140 src/engines/gig/Makefile \
1141 src/engines/common/Makefile \
1142 src/effects/Makefile \
1143 src/common/Makefile \
1144 src/testcases/Makefile \
1145 src/drivers/Makefile \
1146 src/drivers/audio/Makefile \
1147 src/drivers/midi/Makefile \
1148 src/plugins/Makefile \
1149 linuxsampler.spec \
1150 debian/Makefile \
1151 Artwork/Makefile \
1152 scripts/Makefile \
1153 osx/Makefile \
1154 osx/linuxsampler.xcodeproj/Makefile \
1155 Documentation/Makefile \
1156 Documentation/Engines/Makefile \
1157 Documentation/Engines/gig/Makefile \
1158 linuxsampler.pc \
1159 Doxyfile \
1160 )
1161
1162 # resolve all nested variables in '${config_plugin_dir}'
1163 # (merely for providing a human readable summary below)
1164 while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1165 config_plugin_dir=`eval echo ${config_plugin_dir}`
1166 done
1167
1168
1169 ###########################################################################
1170 # Output All Configuration Options
1171
1172 echo ""
1173 echo "#####################################################################"
1174 echo "# LinuxSampler Configuration #"
1175 echo "#-------------------------------------------------------------------#"
1176 echo "# Assembly Optimizations: ${config_asm}"
1177 echo "# Development Mode: ${config_dev_mode}"
1178 echo "# Debug Level: ${config_debug_level}"
1179 echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1180 echo "# Preload Samples: ${config_preload_samples}"
1181 echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1182 echo "# Maximum Events: ${config_max_events}"
1183 echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1184 echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1185 echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1186 echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1187 echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1188 echo "# Stream Size: ${config_stream_size}"
1189 echo "# Maximum Disk Streams: ${config_max_streams}"
1190 echo "# Maximum Voices: ${config_max_voices}"
1191 echo "# Default Subfragment Size: ${config_subfragment_size}"
1192 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1193 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1194 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1195 echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1196 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1197 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1198 echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1199 echo "# Default Portamento Time: ${config_portamento_time_default} s"
1200 echo "# Force Filter Usage: ${config_force_filter}"
1201 echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1202 echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1203 echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1204 echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1205 echo "# Override Filter Type: ${config_override_filter_type}"
1206 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1207 echo "# Process Muted Channels: ${config_process_muted_channels}"
1208 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1209 echo "# Interpolate Volume: ${config_interpolate_volume}"
1210 echo "# Instruments database support: ${config_instruments_db}"
1211 if test "$config_instruments_db" = "yes"; then
1212 echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1213 fi
1214 echo "# Plugin Path: ${config_plugin_dir}"
1215 echo "#-------------------------------------------------------------------#"
1216 echo "# Read './configure --help' or file 'configure.in' for details. #"
1217 echo "#####################################################################"
1218 echo ""
1219 echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1220 echo ""

  ViewVC Help
Powered by ViewVC