/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Contents of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1852 - (show annotations) (download)
Sun Mar 1 22:22:03 2009 UTC (15 years ago) by schoenebeck
Original Path: linuxsampler/trunk/configure.in
File size: 53163 byte(s)
* bugfix: on sample reference changes (instrument editor), only un-cache
  the respective sample if it's really not used by any sampler engine
  anymore
* re-cache samples in case they were changed by an instrument editor, e.g.
  when a sample was added while playing (#82)
* bumped version to 0.5.1.10cvs

1 AC_INIT(configure.in)
2
3 #------------------------------------------------------------------------------------
4 # LinuxSampler's / liblinuxsampler's "official" release version:
5
6 LINUXSAMPLER_RELEASE_MAJOR=0
7 LINUXSAMPLER_RELEASE_MINOR=5
8 LINUXSAMPLER_RELEASE_BUILD=1.10cvs
9
10 #------------------------------------------------------------------------------------
11 # The following is the libtool / shared library version. This doesn't have to
12 # do anything with the release version. It MUST conform to the following rules:
13 #
14 # 1. Start with version information of `0:0:0' for each libtool library.
15 # 2. Update the version information only immediately before a public release of
16 # your software. More frequent updates are unnecessary, and only guarantee
17 # that the current interface number gets larger faster.
18 # 3. If the library source code has changed at all since the last update, then
19 # increment revision (`c:r:a' becomes `c:r+1:a').
20 # 4. If any interfaces have been added, removed, or changed since the last update,
21 # increment current, and set revision to 0.
22 # 5. If any interfaces have been added since the last public release, then increment
23 # age.
24 # 6. If any interfaces have been removed since the last public release, then set age
25 # to 0.
26
27 LIBLINUXSAMPLER_LT_CURRENT=2
28 LIBLINUXSAMPLER_LT_REVISION=0
29 LIBLINUXSAMPLER_LT_AGE=1
30 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31
32 #------------------------------------------------------------------------------------
33 # the LSCP specification version this LinuSampler release complies with:
34
35 LSCP_RELEASE_MAJOR=1
36 LSCP_RELEASE_MINOR=4
37
38 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40
41 AC_PROG_CXX
42 AC_LIBTOOL_WIN32_DLL
43 AM_PROG_LIBTOOL
44
45 AC_SUBST(SHLIB_VERSION_ARG)
46 AC_SUBST(SHARED_VERSION_INFO)
47
48 AC_C_BIGENDIAN
49 AC_CANONICAL_SYSTEM
50
51 AC_SUBST(target)
52 AC_SUBST(target_alias)
53 AC_SUBST(target_cpu)
54 AC_SUBST(target_os)
55 AC_SUBST(target_vendor)
56
57 PKG_PROG_PKG_CONFIG
58
59 ###########################################################################
60 # General Checks
61
62 AC_MSG_CHECKING([whether x86 architecture])
63 def_arch_x86=0
64 case $target_cpu in
65 "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
66 echo "yes"
67 def_arch_x86=1;;
68 *)
69 echo "no";;
70 esac
71 AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
72
73 # determine the right gcc switch for CPU specific optimizations
74 # (only if the user did not provide one)
75 CXX_CPU_SWITCH=
76 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
77 if test "$def_arch_x86" = 1 -a "$target_cpu" != "x86_64"; then
78 CXX_CPU_SWITCH="-march=$target_cpu"
79 elif test "$target_cpu" = "ppc"; then
80 CXX_CPU_SWITCH="-arch=$target_cpu"
81 fi
82 fi
83 AC_SUBST([CXX_CPU_SWITCH])
84
85 # check if we're on MS Windows
86 AC_CHECK_HEADERS(
87 mmsystem.h,
88 have_windows=1,
89 have_windows=0
90 )
91 AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
92
93 AC_MSG_CHECKING([whether UNIX98 compatible])
94 AC_LANG_SAVE
95 AC_LANG_C
96 AC_TRY_RUN([
97 #ifndef _GNU_SOURCE
98 #define _GNU_SOURCE 1
99 #endif
100 #include <features.h>
101 void main(void) {
102 #if _XOPEN_SOURCE >= 500
103 exit(0); /* UNIX98 compatible */
104 #else
105 exit(-1); /* not UNIX98 compatible */
106 #endif
107 }
108 ],
109 have_unix98="yes",
110 have_unix98="no",
111 have_unix98="no"
112 )
113 AC_LANG_RESTORE
114 AC_MSG_RESULT([$have_unix98])
115 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
116 if test "x$HAVE_UNIX98" = "x"; then
117 echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
118 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
119 echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
120 echo "have a UNIX98 compatible system."
121 exit -1;
122 fi
123 fi
124
125 # check for <features.h>
126 AC_CHECK_HEADERS(features.h)
127
128 # test for POSIX thread library
129 m4_ifdef([m4_include(m4/pthread.m4)],,
130 [sinclude([m4/pthread.m4])])
131 ACX_PTHREAD
132 LIBS="$PTHREAD_LIBS $LIBS"
133 CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
134 CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
135 CC="$PTHREAD_CC"
136
137 # check for a bug in NPTL-enabled glibc
138 # (see Gentoo bug report #194076)
139 AC_ARG_ENABLE(nptl-bug-check,
140 [ --disable-nptl-bug-check
141 Disable check for a bug in certain NPTL-enabled
142 glibc versions that caused crashs.],
143 [config_check_nptl_bug="$enableval"],
144 [config_check_nptl_bug="yes"]
145 )
146 if test "$config_check_nptl_bug" = "yes"; then
147 m4_ifdef([m4_include(m4/nptl_bug.m4)],,
148 [sinclude([m4/nptl_bug.m4])])
149 ACX_NPTL_GLIBC_BUG([
150 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
151 echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
152 echo "probably crash due to this. Please report us the system you are"
153 echo "using and/or file a bug report to the bug tracking system of"
154 echo "your distribution."
155 echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
156 echo "well, you can try to circumvent this problem for now by setting"
157 echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
158 echo "should cause this test to pass."
159 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
160 AC_MSG_ERROR([possibly NPTL glibc bug detected])
161 ])
162 else
163 echo "NPTL glibc bug check disabled"
164 fi
165
166 # FIXME: this is actually a dependency of libgig, not of LS directly, why
167 # isn't it hidden by libgig?
168 AC_CHECK_HEADERS(uuid/uuid.h)
169 AC_SEARCH_LIBS(uuid_generate, uuid)
170
171
172
173 ###########################################################################
174 # Checks for available audio and MIDI systems / drivers
175 # (we throw an error if there's not at least one system for audio output and MIDI input available)
176
177 have_midi_input_driver="false"
178 have_audio_output_driver="false"
179
180 # ALSA
181 AC_ARG_ENABLE(alsa-driver,
182 [ --disable-alsa-driver
183 Disable support for the Advanced Linux Sound
184 Architecture (ALSA).],
185 [config_alsa_driver="$enableval"],
186 [config_alsa_driver="yes"]
187 )
188 have_alsa=0
189 if test "$config_alsa_driver" = "yes"; then
190 AC_CHECK_HEADER(alsa/asoundlib.h,
191 AC_CHECK_LIB(asound, main,
192 have_alsa=1
193 ,
194 have_alsa=0
195 )
196 ,
197 have_alsa=0
198 )
199 if test "$have_alsa" = "1"; then
200 have_midi_input_driver="true"
201 have_audio_output_driver="true";
202 fi
203
204 echo -n "checking Alsa version... "
205 AC_LANG_SAVE
206 AC_LANG_C
207 AC_TRY_RUN([
208 #include <alsa/asoundlib.h>
209 void main(void) {
210 /* ensure backward compatibility */
211 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
212 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
213 #endif
214 exit(SND_LIB_MAJOR);
215 }
216 ],
217 alsa_major=0,
218 alsa_major=$?,
219 alsa_major=0
220 )
221 AC_TRY_RUN([
222 #include <alsa/asoundlib.h>
223 void main(void) {
224 /* ensure backward compatibility */
225 #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
226 #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
227 #endif
228 exit(SND_LIB_MINOR);
229 }
230 ],
231 alsa_minor=0,
232 alsa_minor=$?,
233 alsa_minor=0
234 )
235 AC_TRY_RUN([
236 #include <alsa/asoundlib.h>
237 void main(void) {
238 /* ensure backward compatibility */
239 #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
240 #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
241 #endif
242 exit(SND_LIB_SUBMINOR);
243 }
244 ],
245 alsa_subminor=0,
246 alsa_subminor=$?,
247 alsa_subminor=0
248 )
249 AC_LANG_RESTORE
250 echo "$alsa_major.$alsa_minor.$alsa_subminor";
251 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
252 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
253 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
254 else
255 echo "ALSA support disabled by configure script parameter"
256 fi
257 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
258 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
259
260 # JACK
261 AC_ARG_ENABLE(jack-driver,
262 [ --disable-jack-driver
263 Disable support for the Jack Audio Connection Kit
264 (JACK).],
265 [config_jack_driver="$enableval"],
266 [config_jack_driver="yes"]
267 )
268 have_jack=0
269 if test "$config_jack_driver" = "yes"; then
270 PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
271 if test $have_jack = "1"; then
272 AC_SUBST(JACK_LIBS)
273 AC_SUBST(JACK_CFLAGS)
274 linuxsampler_save_LIBS=$LIBS
275 LIBS="$JACK_LIBS $LIBS"
276 AC_CHECK_FUNCS(jack_client_name_size jack_client_open)
277 LIBS=$linuxsampler_save_LIBS
278 have_audio_output_driver="true";
279 fi
280 else
281 echo "JACK support disabled by configure script parameter"
282 fi
283 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
284 AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
285
286 # JACK MIDI
287 have_jack_midi=0
288 if test $have_jack = "1"; then
289 linuxsampler_save_CFLAGS=$CFLAGS
290 linuxsampler_save_LIBS=$LIBS
291 CFLAGS="$JACK_CFLAGS $CFLAGS"
292 LIBS="$JACK_LIBS $LIBS"
293 AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
294 if test $have_jack_midi = "1"; then
295 AC_CHECK_FUNCS(jack_midi_get_event_count)
296 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
297 jack_midi_clear_buffer(0, 0);
298 ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
299 [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
300 have_midi_input_driver="true"
301 fi
302 CFLAGS=$linuxsampler_save_CFLAGS
303 LIBS=$linuxsampler_save_LIBS
304 fi
305 AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
306 AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
307 [Define to 1 if you have JACK with MIDI support installed.])
308
309 # ARTS
310 AC_ARG_ENABLE(arts-driver,
311 [ --disable-arts-driver
312 Disable support for the Analogue Realtime System
313 (aRts).],
314 [config_arts_driver="$enableval"],
315 [config_arts_driver="yes"]
316 )
317 have_arts=0
318 if test "$config_arts_driver" = "yes"; then
319 m4_ifdef([m4_include(m4/arts.m4)],,
320 [sinclude([m4/arts.m4])])
321 AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
322 if test "$have_arts" = "1"; then
323 have_audio_output_driver="true"
324 fi
325 else
326 echo "ARTS support disabled by configure script parameter"
327 fi
328 AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
329 AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
330
331 # ASIO AUDIO (Win32)
332 AC_ARG_ENABLE(asiosdk-dir,
333 [ --enable-asiosdk-dir
334 Directory where the ASIO SDK is located, this automatically
335 enables the compilation of the ASIO audio output driver.],
336 [config_asiosdk_dir="${enableval}"],
337 [config_asiosdk_dir="."]
338 )
339 AC_SUBST(config_asiosdk_dir)
340
341 AC_ARG_ENABLE(asio-driver,
342 [ --disable-asio-driver
343 Disable support for the Windows ASIO driver.],
344 [config_asio_driver="$enableval"],
345 [config_asio_driver="yes"]
346 )
347 have_asio=0
348 ASIOSDK_BASEDIR=
349 if test "$config_asio_driver" = "yes"; then
350 asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
351 echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
352 if test -e $asiosdk_headerfile ; then
353 echo yes
354 have_asio=1
355 ASIOSDK_BASEDIR="$config_asiosdk_dir"
356 else
357 echo no
358 have_asio=0
359 fi
360 if test "$have_asio" = "1"; then
361 have_audio_output_driver="true"
362 fi
363 else
364 echo "Windows ASIO support disabled by configure script parameter"
365 fi
366 AC_SUBST(ASIOSDK_BASEDIR)
367 AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
368 AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
369
370 # MidiShare (Linux, OS X, Windows)
371 AC_ARG_ENABLE(midishare-driver,
372 [ --disable-midishare-driver
373 Disable support for the MidiShare system.],
374 [config_midishare_driver="$enableval"],
375 [config_midishare_driver="yes"]
376 )
377 have_midishare=0
378 if test "$config_midishare_driver" = "yes"; then
379 AC_CHECK_HEADER(MidiShare.h,
380 AC_CHECK_LIB(MidiShare, MidiCountEvs,
381 have_midishare=1,
382 have_midishare=0
383 )
384 ,
385 have_midishare=0
386 )
387 if test "$have_midishare" = "1"; then
388 have_midi_input_driver="true"
389 fi
390 else
391 echo "MidiShare support disabled by configure script parameter"
392 fi
393 AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
394 AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
395
396 # CoreMIDI (OS X)
397 AC_ARG_ENABLE(coremidi-driver,
398 [ --disable-coremidi-driver
399 Disable support for the Apple CoreMIDI system.],
400 [config_coremidi_driver="$enableval"],
401 [config_coremidi_driver="yes"]
402 )
403 have_coremidi=0
404 if test "$config_coremidi_driver" = "yes"; then
405 AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
406 have_coremidi=1,
407 have_coremidi=0
408 )
409 if test "$have_coremidi" = "1"; then
410 have_midi_input_driver="true"
411 fi
412 else
413 echo "CoreMIDI support disabled by configure script parameter"
414 fi
415 AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
416 AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
417
418 # CoreAudio (OS X)
419 AC_ARG_ENABLE(coreaudio-driver,
420 [ --disable-coreaudio-driver
421 Disable support for the Apple CoreAudio system.],
422 [config_coreaudio_driver="$enableval"],
423 [config_coreaudio_driver="yes"]
424 )
425 have_coreaudio=0
426 if test "$config_coreaudio_driver" = "yes"; then
427 AC_CHECK_HEADER(CoreAudio/CoreAudio.h,
428 have_coreaudio=1,
429 have_coreaudio=0
430 )
431 if test "$have_coreaudio" = "1"; then
432 have_audio_output_driver="true"
433 fi
434 else
435 echo "CoreAudio support disabled by configure script parameter"
436 fi
437 AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1")
438 AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.])
439
440 # MME MIDI (Win32)
441 AC_ARG_ENABLE(mmemidi-driver,
442 [ --disable-mmemidi-driver
443 Disable support for the Windows MME MIDI system.],
444 [config_mmemidi_driver="$enableval"],
445 [config_mmemidi_driver="yes"]
446 )
447 have_mmemidi=0
448 if test "$config_mmemidi_driver" = "yes"; then
449 AC_CHECK_HEADERS(mmsystem.h,
450 have_mmemidi=1,
451 have_mmemidi=0
452 )
453 if test "$have_mmemidi" = "1"; then
454 have_midi_input_driver="true"
455 fi
456 else
457 echo "MME MIDI support disabled by configure script parameter"
458 fi
459 AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
460 AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
461
462
463 # DSSI
464 AC_CHECK_HEADERS(dssi.h,
465 have_dssi=1,
466 have_dssi=0)
467 AM_CONDITIONAL(HAVE_DSSI, test $have_dssi = "1")
468
469 # LV2
470 PKG_CHECK_MODULES(LV2, lv2core, have_lv2=1, have_lv2=0)
471 if test $have_lv2 = "0"; then
472 AC_CHECK_HEADER(lv2.h, have_lv2=1, have_lv2=0)
473 fi
474 AM_CONDITIONAL(HAVE_LV2, test $have_lv2 = "1")
475
476 # VST
477 AC_ARG_ENABLE(vstsdk-dir,
478 [ --enable-vstsdk-dir
479 Directory where the VST SDK is located.
480 This automatically enables the compilation
481 of the VST plugin.],
482 [VSTSDK_DIR="${enableval}"],
483 [VSTSDK_DIR=]
484 )
485 AC_SUBST(VSTSDK_DIR)
486 AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
487
488 # AU
489 AC_CHECK_HEADERS(AudioUnit/AudioUnit.h,
490 have_au=1,
491 have_au=0)
492 AM_CONDITIONAL(HAVE_AU, test $have_au = "1")
493 AM_CONDITIONAL(HAVE_AUFLAGS, test test "$AUFLAGS" != "")
494
495
496 # have we found at least one MIDI input and one audio output driver ?
497 if test "$have_midi_input_driver" = "false"; then
498 echo "No supported MIDI input system found!"
499 echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
500 echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
501 echo "If you think you have one of those available on your system, make sure you"
502 echo "also have the respective development (header) files installed."
503 exit -1;
504 fi
505 if test "$have_audio_output_driver" = "false"; then
506 echo "No supported audio output system found!"
507 echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
508 echo "driver at the moment!"
509 exit -1;
510 fi
511
512
513
514 ###########################################################################
515 # Checks for various DLL libraries
516
517 # Check presence of libgig
518 libgig_version="3.2.1"
519 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
520 if test "$HAVE_GIG" = "false"; then
521 echo "Required libgig version not found!"
522 echo "You need to have libgig version ${libgig_version} installed!"
523 exit -1;
524 else
525 echo "yes, found libgig $libgig_version"
526 fi
527 AC_SUBST(GIG_CFLAGS)
528 AC_SUBST(GIG_LIBS)
529
530 # Instruments DB feature (requires SQLite 3.3)
531 AC_ARG_ENABLE(instruments-db,
532 [ --disable-instruments-db
533 Disable compilation of the sampler's instruments
534 database feature. You need to have SQLite 3.3
535 or younger installed for this feature.],
536 [config_instruments_db="$enableval"],
537 [config_instruments_db="yes"]
538 )
539 HAVE_SQLITE3=0;
540 if test "$config_instruments_db" = "yes"; then
541 # Check presence of sqlite3
542 sqlite_version="3.3"
543 PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
544 AC_SUBST(SQLITE3_LIBS)
545 AC_SUBST(SQLITE3_CFLAGS)
546 if test $HAVE_SQLITE3 = false; then
547 HAVE_SQLITE3=0
548 config_instruments_db="no"
549 echo "*** Required sqlite version not found!"
550 echo "*** You need to have sqlite version ${sqlite_version} or higher"
551 echo "*** for instruments database support to be enabled."
552 echo "*** Support for instruments DB will be disabled!"
553 else
554 HAVE_SQLITE3=1
555 fi
556 else
557 echo "Instruments DB feature disabled by configure script parameter"
558 fi
559 AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
560 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
561
562
563
564 ###########################################################################
565 # Handle Configuration Options
566
567 # TODO: should we use AC_ARG_VAR(variable, description) instead?
568
569 AC_ARG_ENABLE(asm,
570 [ --disable-asm
571 Enable hand-crafted assembly optimizations
572 (default=on). LinuxSampler provides CPU specific
573 assembly optimizations. This is currently limited
574 to just enter a fast (denormal) FPU mode on x86
575 platforms. There are currently no synthesis core
576 assembly optimizations anymore since LS 0.4.0],
577 [config_asm="$enableval"],
578 [config_asm="yes"]
579 )
580 if test "$config_asm" = "yes"; then
581 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
582 fi
583
584 AC_ARG_ENABLE(dev-mode,
585 [ --enable-dev-mode
586 Enable development mode (default=off). In that mode
587 we do some extra sanity checks here and there.
588 This helps to spot possible problems, but reduces
589 efficiency a bit],
590 [config_dev_mode="$enableval"],
591 [config_dev_mode="no"]
592 )
593 if test "$config_dev_mode" = "yes"; then
594 AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
595 fi
596
597 AC_ARG_ENABLE(debug-level,
598 [ --enable-debug-level
599 Specify verbosity of console messages (default=1).
600 The higher the value, the higher will be verbosity.
601 A value of 0 means no console output at all.
602 There's not really an upper limit but the usual
603 level of all messages is currently somewhere less
604 than 10.],
605 [config_debug_level="${enableval}"],
606 [config_debug_level="1"]
607 )
608 AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
609
610 AC_ARG_ENABLE(rt-exceptions,
611 [ --enable-rt-exceptions
612 Enable exceptions in the realtime thread
613 (default=no). If this is enabled, exceptions will
614 be thrown on critical errors in the realtime
615 context as well. Otherwise if disabled
616 segmentation faults will be forced by the
617 application on critical errors.],
618 [config_rt_exceptions="$enableval"],
619 [config_rt_exceptions="no"]
620 )
621 if test "$config_rt_exceptions" = "yes"; then
622 AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
623 fi
624
625 AC_ARG_ENABLE(pthread-testcancel,
626 [ --enable-pthread-testcancel
627 Enable pthread_testcancel() calls and avoid asynchronous
628 cancel of pthreads (default=no).],
629 [config_pthread_testcancel="$enableval"],
630 [config_pthread_testcancel="no"]
631 )
632 if test "$config_pthread_testcancel" = "yes"; then
633 AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
634 fi
635
636 AC_ARG_ENABLE(preload-samples,
637 [ --enable-preload-samples
638 Due to seeking and latency issues with hard drives
639 we have to cache a small part of samples' head in
640 RAM (default=32768). The higher this value the
641 more memory will be occupied for each sample, but
642 the safer this will be in regards of possible
643 droputs. A 'good' value depends on the running
644 system and usage dependant factors.],
645 [config_preload_samples="${enableval}"],
646 [config_preload_samples="32768"]
647 )
648 AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
649
650 AC_ARG_ENABLE(max-pitch,
651 [ --enable-max-pitch
652 Specify the maximum allowed pitch value in octaves
653 (default=4). To lower memory usage you might want
654 set a smaller value.],
655 [config_max_pitch="${enableval}"],
656 [config_max_pitch="4"]
657 )
658 AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
659
660 AC_ARG_ENABLE(max-events,
661 [ --enable-max-events
662 Specify the maximum allowed amount of events to be
663 processed per fragment (default=1024).],
664 [config_max_events="${enableval}"],
665 [config_max_events="1024"]
666 )
667 AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
668
669 AC_ARG_ENABLE(eg-bottom,
670 [ --enable-eg-bottom
671 Bottom limit of envelope generators
672 (default=0.001). Certain kinds of curve types like
673 exponential curves converge against 0 but never
674 reach 0. So we have to define a certain low value
675 after which we should consider all smaller values
676 to be 'almost zero'. The smaller this value, the
677 longer will voices survive in EG's release stage
678 and thus waste voices. If this value is too high
679 will cause click sounds though.],
680 [config_eg_bottom="${enableval}"],
681 [config_eg_bottom="0.001"]
682 )
683 AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
684
685 AC_ARG_ENABLE(eg-min-release-time,
686 [ --enable-eg-min-release-time
687 Specify the lowest allowed release time in seconds
688 (default=0.0025). This value will also be used to
689 ramp down voices on voice stealing. This value
690 should always be less than the period time of the
691 used audio driver, as in case of voice stealing
692 the killed voice needs to be completely ramped
693 down in the same fragment.],
694 [config_eg_min_release_time="${enableval}"],
695 [config_eg_min_release_time="0.0025"]
696 )
697 AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
698
699 AC_ARG_ENABLE(refill-streams,
700 [ --enable-refill-streams
701 Number of streams that should be refilled in each
702 disk thread cycle (default=4).],
703 [config_refill_streams="${enableval}"],
704 [config_refill_streams="4"]
705 )
706 AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
707
708 AC_ARG_ENABLE(stream-min-refill,
709 [ --enable-stream-min-refill
710 Minimum refill size for disk streams (default=1024).
711 The disk thread will go to sleep for a while if no
712 stream had to be refilled more than this value in
713 a disk thread cycle.],
714 [config_stream_min_refill="${enableval}"],
715 [config_stream_min_refill="1024"]
716 )
717 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
718
719 AC_ARG_ENABLE(stream-max-refill,
720 [ --enable-stream-max-refill
721 Maximum refill size for disk streams
722 (default=65536). The disk thread will refill
723 each stream only by a size of this value per
724 disk thread cycle.],
725 [config_stream_max_refill="${enableval}"],
726 [config_stream_max_refill="65536"]
727 )
728 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
729
730 AC_ARG_ENABLE(stream-size,
731 [ --enable-stream-size
732 Size of each stream's ring buffer in sample points
733 (default=262144).],
734 [config_stream_size="${enableval}"],
735 [config_stream_size="262144"]
736 )
737 AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
738
739 AC_ARG_ENABLE(max-streams,
740 [ --enable-max-streams
741 Initial maximum amount of disk streams
742 (default=90). This value can be changed at
743 runtime. It should always be higher than the
744 maximum amount of voices.],
745 [config_max_streams="${enableval}"],
746 [config_max_streams="90"]
747 )
748 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
749
750 AC_ARG_ENABLE(max-voices,
751 [ --enable-max-voices
752 Initial maximum amount of voices (default=64).
753 This value can be changed at runtime. It should
754 always be lower than the maximum amount of disk
755 streams.],
756 [config_max_voices="${enableval}"],
757 [config_max_voices="64"]
758 )
759 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
760
761 AC_ARG_ENABLE(subfragment-size,
762 [ --enable-subfragment-size
763 Every audio fragment will be splitted into
764 subfragments. Where each subfragment renders
765 audio with constant synthesis parameters. This is
766 done for efficiency reasons. This parameter
767 defines the default size of a subfragment in
768 sample points. A large value means less CPU time
769 whereas a low value means better audio quality
770 (default=32).],
771 [config_subfragment_size="${enableval}"],
772 [config_subfragment_size="32"]
773 )
774 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
775
776 AC_ARG_ENABLE(global-attenuation-default,
777 [ --enable-global-attenuation-default
778 To prevent clipping all samples will be lowered
779 in amplitude by this given default factor (can
780 be overridden at runtime).
781 (default=0.35)],
782 [config_global_attenuation_default="${enableval}"],
783 [config_global_attenuation_default="0.35"]
784 )
785 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
786
787 AC_ARG_ENABLE(voice-steal-algo,
788 [ --enable-voice-steal-algo
789 Voice stealing algorithm to be used. Currently
790 available options:
791 none:
792 Disable voice stealing completely.
793 oldestvoiceonkey (default):
794 Try to kill a voice on the same key first,
795 if no success, proceed with the oldest key.
796 oldestkey:
797 Try to kill a voice from the oldest active
798 key.],
799 [ if test ! "(" "${enableval}" = "none" \
800 -o "${enableval}" = "oldestvoiceonkey" \
801 -o "${enableval}" = "oldestkey" ")" ; then
802 AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
803 else
804 config_voice_steal_algo="${enableval}"
805 fi
806 ],
807 [config_voice_steal_algo="oldestvoiceonkey"]
808 )
809 AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
810
811 AC_ARG_ENABLE(sysex-buffer-size,
812 [ --enable-sysex-buffer-size
813 System Exclusive Message buffer size in kB
814 (default=2048).],
815 [config_sysex_buffer_size="${enableval}"],
816 [config_sysex_buffer_size="2048"]
817 )
818 AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
819
820 AC_ARG_ENABLE(force-filter,
821 [ --enable-force-filter
822 If enabled will force filter to be used even if
823 no usage was define in instrument patch files.
824 (default=no).],
825 [config_force_filter="$enableval"],
826 [config_force_filter="no"]
827 )
828 if test "$config_force_filter" = "yes"; then
829 AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
830 fi
831
832 AC_ARG_ENABLE(filter-cutoff-min,
833 [ --enable-filter-cutoff-min
834 Minimum filter cutoff frequency in Hz
835 (default=100.0).],
836 [config_filter_cutoff_min="${enableval}"],
837 [config_filter_cutoff_min="100.0"]
838 )
839 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
840
841 AC_ARG_ENABLE(filter-cutoff-max,
842 [ --enable-filter-cutoff-max
843 Maximum filter cutoff frequency in Hz
844 (default=10000.0).],
845 [config_filter_cutoff_max="${enableval}"],
846 [config_filter_cutoff_max="10000.0"]
847 )
848 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
849
850 AC_ARG_ENABLE(override-cutoff-ctrl,
851 [ --enable-override-cutoff-ctrl
852 Override filter cutoff MIDI controller (default=no).
853 Note: you have to define the MIDI controller number
854 here, it's not a boolean parameter type! If this
855 option is used, controller number given by
856 instrument patch will be ignored and instead this
857 supplied value will be used.],
858 [config_override_cutoff_ctrl="${enableval}"],
859 [config_override_cutoff_ctrl="no"]
860 )
861 if test ! "$config_override_cutoff_ctrl" = "no"; then
862 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
863 fi
864
865 AC_ARG_ENABLE(override-resonance-ctrl,
866 [ --enable-override-resonance-ctrl
867 Override filter resonance MIDI controller
868 (default=no). Note: you have to define the MIDI
869 controller number here, it's not a boolean
870 parameter type! If this option is used, controller
871 number given by instrument patch will be ignored
872 and instead this supplied value will be used.],
873 [config_override_resonance_ctrl="${enableval}"],
874 [config_override_resonance_ctrl="no"]
875 )
876 if test ! "$config_override_resonance_ctrl" = "no"; then
877 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
878 fi
879
880 AC_ARG_ENABLE(override-filter-type,
881 [ --enable-override-filter-type
882 Override filter type (default=no). Options:
883 hp: for highpass
884 bp: for bandpass
885 br: for bandreject
886 lp: for lowpass
887 lpt: for lowpass turbo],
888 [ if test "${enableval}" = "hp" ; then
889 config_override_filter_type="::gig::vcf_type_highpass"
890 elif test "${enableval}" = "bp" ; then
891 config_override_filter_type="::gig::vcf_type_bandpass"
892 elif test "${enableval}" = "br" ; then
893 config_override_filter_type="::gig::vcf_type_bandreject"
894 elif test "${enableval}" = "lp" ; then
895 config_override_filter_type="::gig::vcf_type_lowpass"
896 elif test "${enableval}" = "lpt" ; then
897 config_override_filter_type="::gig::vcf_type_lowpassturbo"
898 elif test ! "${enableval}" = "no"; then
899 AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
900 fi
901 ],
902 [config_override_filter_type="no"]
903 )
904 if test ! "$config_override_filter_type" = "no"; then
905 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
906 fi
907
908 AC_ARG_ENABLE(gs-checksum,
909 [ --enable-gs-checksum
910 Enable Roland General Synth SysEx checksum check
911 (default=no). If this is enabled, all GS SysEx
912 messages which do not provide a correct checksum
913 will be ignored. This is disabled by default as
914 not all devices honor GS checksums.],
915 [config_assert_gs_sysex_checksum="$enableval"],
916 [config_assert_gs_sysex_checksum="no"]
917 )
918 if test "config_assert_gs_sysex_checksum" = "yes"; then
919 AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
920 fi
921
922 AC_ARG_ENABLE(portamento-time-min,
923 [ --enable-portamento-time-min
924 Minimum Portamento time in seconds
925 (default=0.1).],
926 [config_portamento_time_min="${enableval}"],
927 [config_portamento_time_min="0.1"]
928 )
929 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
930
931 AC_ARG_ENABLE(portamento-time-max,
932 [ --enable-portamento-time-max
933 Maximum Portamento time in seconds
934 (default=32).],
935 [config_portamento_time_max="${enableval}"],
936 [config_portamento_time_max="32"]
937 )
938 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
939
940 AC_ARG_ENABLE(portamento-time-default,
941 [ --enable-portamento-time-default
942 Default Portamento time in seconds
943 (default=1).],
944 [config_portamento_time_default="${enableval}"],
945 [config_portamento_time_default="1"]
946 )
947 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
948
949 AC_ARG_ENABLE(signed-triang-algo,
950 [ --enable-signed-triang-algo
951 Signed triangular wave algorithm to be used (e.g. for LFOs).
952 Currently available options:
953 intmath:
954 Uses integer math without any branch will then be
955 converted to floating point value for each sample point.
956 This int->float conversion might hurt on some systems.
957 intmathabs:
958 Similar to intmath but uses abs() function.
959 Depending on compiler and platrofm this could
960 perform better than integer math as it avoids
961 an extra integer multiply instruction.
962 diharmonic:
963 The triangular wave will be approximated by adding two
964 sinusoidials. This solution might especially hurt on
965 systems with weak floating point unit.
966 benchmark (default):
967 This is not an algorithm. Use this option if the
968 appropriate algorithm should be automatically
969 chosen by the configure script by performing a
970 benchmark between the algorithms mentioned above.
971 This will NOT work for cross compilation!],
972 [ if test ! "(" "${enableval}" = "intmath" \
973 -o "${enableval}" = "intmathabs" \
974 -o "${enableval}" = "diharmonic" ")" ; then
975 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
976 else
977 config_signed_triang_algo="${enableval}"
978 fi
979 ],
980 [config_signed_triang_algo="benchmark"]
981 )
982
983 AC_ARG_ENABLE(unsigned-triang-algo,
984 [ --enable-unsigned-triang-algo
985 Unsigned triangular wave algorithm to be used (e.g. for LFOs).
986 Currently available options:
987 intmath:
988 Uses integer math without any branch will then be
989 converted to floating point value for each sample point.
990 This int->float conversion might hurt on some systems.
991 intmathabs:
992 Similar to intmath but uses abs() function.
993 Depending on compiler and platrofm this could
994 perform better than integer math as it avoids
995 an extra integer multiply instruction.
996 diharmonic:
997 The triangular wave will be approximated by adding two
998 sinusoidials. This solution might especially hurt on
999 systems with weak floating point unit.
1000 benchmark (default):
1001 This is not an algorithm. Use this option if the
1002 appropriate algorithm should be automatically
1003 chosen by the configure script by performing a
1004 benchmark between the algorithms mentioned above.
1005 This will NOT work for cross compilation!],
1006 [ if test ! "(" "${enableval}" = "intmath" \
1007 -o "${enableval}" = "intmathabs" \
1008 -o "${enableval}" = "diharmonic" ")" ; then
1009 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
1010 else
1011 config_unsigned_triang_algo="${enableval}"
1012 fi
1013 ],
1014 [config_unsigned_triang_algo="benchmark"]
1015 )
1016
1017 AC_ARG_ENABLE(process-muted-channels,
1018 [ --enable-process-muted-channels
1019 Enable processing of muted channels (default=no).
1020 In that mode all MIDI events in the muted channels
1021 will be processed. This will provide information
1022 about the active voices in the muted channels and
1023 will not discard notes, triggered in mute mode,
1024 when the channel is unmuted. But also will reduce
1025 the efficiency.],
1026 [config_process_muted_channels="$enableval"],
1027 [config_process_muted_channels="no"]
1028 )
1029 if test "$config_process_muted_channels" = "yes"; then
1030 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
1031 fi
1032
1033 AC_ARG_ENABLE(process-all-notes-off,
1034 [ --disable-process-all-notes-off
1035 Disable interpretation of All-Notes-Off MIDI
1036 messages (default=on). By default LS will release
1037 all voices whenever it receives an All-Notes-Off
1038 MIDI message. You can disable this behavior, so
1039 that LS simply ignores such messages.],
1040 [config_process_all_notes_off="$enableval"],
1041 [config_process_all_notes_off="yes"]
1042 )
1043 if test "$config_process_all_notes_off" = "yes"; then
1044 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
1045 fi
1046
1047 AC_ARG_ENABLE(interpolate-volume,
1048 [ --disable-interpolate-volume
1049 Disable interpolation of volume modulation
1050 (default=on). With this enabled, the volume changes
1051 generated by for example the envelope generator
1052 will be smoother, minimizing the risk for audio
1053 clicks. Disable it to reduce CPU usage.],
1054 [config_interpolate_volume="$enableval"],
1055 [config_interpolate_volume="yes"]
1056 )
1057 if test "$config_interpolate_volume" = "yes"; then
1058 AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
1059 fi
1060
1061 AC_ARG_ENABLE(master-volume-sysex-by-port,
1062 [ --enable-master-volume-sysex-by-port
1063 Whether global volume sysex message should be
1064 applied globally to the whole sampler or only to
1065 the sampler channels connected to the same MIDI
1066 input port on which the sysex message arrived on.
1067 By default global volume sysex messages apply
1068 globally to the whole sampler, since many MIDI
1069 devices behave that way.],
1070 [config_master_volume_sysex_by_port="$enableval"],
1071 [config_master_volume_sysex_by_port="no"]
1072 )
1073 if test "$config_master_volume_sysex_by_port" = "yes"; then
1074 AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
1075 fi
1076
1077 AC_ARG_ENABLE(plugin-dir,
1078 [ --enable-plugin-dir
1079 Directory where the sampler shall look for potential plugins,
1080 that is 3rd party shared libraries that should be loaded by
1081 the sampler on startup. By default the sampler will search
1082 for plugins in the subdirectory "plugins" below its own
1083 library directory.
1084 (i.e. /usr/local/lib/linuxsampler/plugins)],
1085 [config_plugin_dir="${enableval}"],
1086 [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1087 )
1088 AC_SUBST(config_plugin_dir)
1089
1090 AC_ARG_ENABLE(default-instruments-db-location,
1091 [ --enable-default-instruments-db-location
1092 Only when instruments DB feature is enabled: file name
1093 which shall be taken as default location of the
1094 instruments DB file. This location can still be
1095 overridden at runtime with a command line switch.
1096 (default: /var/lib/linuxsampler/instruments.db)],
1097 [config_default_instruments_db_file="${enableval}"],
1098 [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1099 )
1100 AC_DEFINE_UNQUOTED(
1101 CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1102 "$config_default_instruments_db_file",
1103 [Only when instruments DB feature is enabled: default location of the DB file.]
1104 )
1105 AC_SUBST(config_default_instruments_db_file)
1106
1107
1108 ###########################################################################
1109 # Automatic Benchmarks (to detect the best algorithms for the system)
1110
1111 AC_LANG_SAVE
1112
1113 if test "$config_signed_triang_algo" = "benchmark"; then
1114 echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1115 AC_LANG_CPLUSPLUS
1116 AC_TRY_RUN([
1117 #define SIGNED 1
1118 #define SILENT 1
1119 #include "${srcdir}/benchmarks/triang.cpp"
1120 ],
1121 triang_signed=0,
1122 triang_signed=$?,
1123 triang_signed=0
1124 )
1125 if test "$triang_signed" = "2"; then
1126 config_signed_triang_algo="intmath"
1127 echo "integer math"
1128 elif test "$triang_signed" = "3"; then
1129 config_signed_triang_algo="diharmonic"
1130 echo "di harmonics"
1131 elif test "$triang_signed" = "5"; then
1132 config_signed_triang_algo="intmathabs"
1133 echo "integer math using abs()"
1134 else
1135 echo "Benchmark of signed triangular wave algorithms failed!"
1136 echo "Maybe you are doing cross compilation? In that case you have to select"
1137 echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1138 echo "Call './configure --help' for further information or read configure.in."
1139 exit -1;
1140 fi
1141 else
1142 case "$config_signed_triang_algo" in
1143 intmath)
1144 triang_signed=2 ;;
1145 diharmonic)
1146 triang_signed=3 ;;
1147 intmathabs)
1148 triang_signed=5 ;;
1149 esac
1150 fi
1151 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1152
1153 if test "$config_unsigned_triang_algo" = "benchmark"; then
1154 echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1155 AC_LANG_CPLUSPLUS
1156 AC_TRY_RUN([
1157 #define SIGNED 0
1158 #define SILENT 1
1159 #include "${srcdir}/benchmarks/triang.cpp"
1160 ],
1161 triang_unsigned=0,
1162 triang_unsigned=$?,
1163 triang_unsigned=0
1164 )
1165 if test "$triang_unsigned" = "2"; then
1166 config_unsigned_triang_algo="intmath"
1167 echo "integer math"
1168 elif test "$triang_unsigned" = "3"; then
1169 config_unsigned_triang_algo="diharmonic"
1170 echo "di harmonics"
1171 elif test "$triang_unsigned" = "5"; then
1172 config_unsigned_triang_algo="intmathabs"
1173 echo "integer math using abs()"
1174 else
1175 echo "Benchmark of unsigned triangular wave algorithms failed!"
1176 echo "Maybe you are doing cross compilation? In that case you have to select"
1177 echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1178 echo "Call './configure --help' for further information or read configure.in."
1179 exit -1;
1180 fi
1181 else
1182 case "$config_unsigned_triang_algo" in
1183 intmath)
1184 triang_unsigned=2 ;;
1185 diharmonic)
1186 triang_unsigned=3 ;;
1187 intmathabs)
1188 triang_unsigned=5 ;;
1189 esac
1190 fi
1191 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1192
1193 AC_LANG_RESTORE
1194
1195
1196 ###########################################################################
1197 # Create Build Files
1198
1199 AM_CONFIG_HEADER(config.h)
1200 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1201
1202 AC_LANG_CPLUSPLUS
1203
1204 # some gcc 4.0 versions need -msse for SSE register allocations
1205 if test "$config_asm" = "yes"; then
1206 if test "$def_arch_x86" = 1; then
1207 CXXFLAGS="$CXXFLAGS -msse"
1208 fi
1209 fi
1210
1211 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1212 # this, the dlfcn.h check in am_prog_libtool may fail.
1213 AC_CHECK_HEADER(stdlib.h)
1214
1215 AC_OUTPUT( \
1216 Makefile \
1217 man/Makefile \
1218 man/linuxsampler.1 \
1219 src/Makefile \
1220 src/db/Makefile \
1221 src/network/Makefile \
1222 src/engines/Makefile \
1223 src/engines/gig/Makefile \
1224 src/engines/common/Makefile \
1225 src/effects/Makefile \
1226 src/common/Makefile \
1227 src/testcases/Makefile \
1228 src/drivers/Makefile \
1229 src/drivers/audio/Makefile \
1230 src/drivers/midi/Makefile \
1231 src/plugins/Makefile \
1232 src/hostplugins/Makefile \
1233 src/hostplugins/dssi/Makefile \
1234 src/hostplugins/lv2/Makefile \
1235 src/hostplugins/vst/Makefile \
1236 src/hostplugins/au/Makefile \
1237 linuxsampler.spec \
1238 debian/Makefile \
1239 Artwork/Makefile \
1240 scripts/Makefile \
1241 osx/Makefile \
1242 osx/linuxsampler.xcodeproj/Makefile \
1243 Documentation/Makefile \
1244 Documentation/Engines/Makefile \
1245 Documentation/Engines/gig/Makefile \
1246 linuxsampler.pc \
1247 Doxyfile \
1248 )
1249
1250 # resolve all nested variables in '${config_plugin_dir}'
1251 # (merely for providing a human readable summary below)
1252 while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1253 config_plugin_dir=`eval echo ${config_plugin_dir}`
1254 done
1255
1256
1257 ###########################################################################
1258 # Output All Configuration Options
1259
1260 echo ""
1261 echo "#####################################################################"
1262 echo "# LinuxSampler Configuration #"
1263 echo "#-------------------------------------------------------------------#"
1264 echo "# Assembly Optimizations: ${config_asm}"
1265 echo "# Development Mode: ${config_dev_mode}"
1266 echo "# Debug Level: ${config_debug_level}"
1267 echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1268 echo "# Preload Samples: ${config_preload_samples}"
1269 echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1270 echo "# Maximum Events: ${config_max_events}"
1271 echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1272 echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1273 echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1274 echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1275 echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1276 echo "# Stream Size: ${config_stream_size}"
1277 echo "# Default Maximum Disk Streams: ${config_max_streams}"
1278 echo "# Default Maximum Voices: ${config_max_voices}"
1279 echo "# Default Subfragment Size: ${config_subfragment_size}"
1280 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1281 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1282 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1283 echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1284 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1285 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1286 echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1287 echo "# Default Portamento Time: ${config_portamento_time_default} s"
1288 echo "# Force Filter Usage: ${config_force_filter}"
1289 echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1290 echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1291 echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1292 echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1293 echo "# Override Filter Type: ${config_override_filter_type}"
1294 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1295 echo "# Process Muted Channels: ${config_process_muted_channels}"
1296 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1297 echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
1298 echo "# Interpolate Volume: ${config_interpolate_volume}"
1299 echo "# Instruments database support: ${config_instruments_db}"
1300 if test "$config_instruments_db" = "yes"; then
1301 echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1302 fi
1303 echo "# Plugin Path: ${config_plugin_dir}"
1304 echo "#-------------------------------------------------------------------#"
1305 echo "# Read './configure --help' or file 'configure.in' for details. #"
1306 echo "#####################################################################"
1307 echo ""
1308 echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1309 echo ""

  ViewVC Help
Powered by ViewVC