/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Contents of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1899 - (show annotations) (download)
Sun May 10 16:35:12 2009 UTC (14 years, 10 months ago) by persson
Original Path: linuxsampler/trunk/configure.in
File size: 54940 byte(s)
* configure script fix: removed unconditional use of SSE

1 AC_INIT(configure.in)
2
3 #------------------------------------------------------------------------------------
4 # LinuxSampler's / liblinuxsampler's "official" release version:
5
6 LINUXSAMPLER_RELEASE_MAJOR=0
7 LINUXSAMPLER_RELEASE_MINOR=5
8 LINUXSAMPLER_RELEASE_BUILD=1.12cvs
9
10 #------------------------------------------------------------------------------------
11 # The following is the libtool / shared library version. This doesn't have to
12 # do anything with the release version. It MUST conform to the following rules:
13 #
14 # 1. Start with version information of `0:0:0' for each libtool library.
15 # 2. Update the version information only immediately before a public release of
16 # your software. More frequent updates are unnecessary, and only guarantee
17 # that the current interface number gets larger faster.
18 # 3. If the library source code has changed at all since the last update, then
19 # increment revision (`c:r:a' becomes `c:r+1:a').
20 # 4. If any interfaces have been added, removed, or changed since the last update,
21 # increment current, and set revision to 0.
22 # 5. If any interfaces have been added since the last public release, then increment
23 # age.
24 # 6. If any interfaces have been removed since the last public release, then set age
25 # to 0.
26
27 LIBLINUXSAMPLER_LT_CURRENT=2
28 LIBLINUXSAMPLER_LT_REVISION=0
29 LIBLINUXSAMPLER_LT_AGE=1
30 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31
32 #------------------------------------------------------------------------------------
33 # the LSCP specification version this LinuSampler release complies with:
34
35 LSCP_RELEASE_MAJOR=1
36 LSCP_RELEASE_MINOR=4
37
38 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40
41 AC_PROG_CXX
42 AC_LIBTOOL_WIN32_DLL
43 AM_PROG_LIBTOOL
44
45 AC_SUBST(SHLIB_VERSION_ARG)
46 AC_SUBST(SHARED_VERSION_INFO)
47
48 AC_C_BIGENDIAN
49 AC_CANONICAL_HOST
50
51 PKG_PROG_PKG_CONFIG
52
53 ###########################################################################
54 # General Checks
55
56 AC_MSG_CHECKING([whether x86 architecture])
57 def_arch_x86=0
58 case $host_cpu in
59 "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
60 echo "yes"
61 def_arch_x86=1;;
62 *)
63 echo "no";;
64 esac
65 AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
66
67 # determine the right gcc switch for CPU specific optimizations
68 # (only if the user did not provide one)
69 CXX_CPU_SWITCH=
70 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
71 if test "$def_arch_x86" = 1 -a "$host_cpu" != "x86_64"; then
72 CXX_CPU_SWITCH="-march=$host_cpu"
73 elif test "$target_cpu" = "ppc"; then
74 CXX_CPU_SWITCH="-arch=$host_cpu"
75 fi
76 fi
77 AC_SUBST([CXX_CPU_SWITCH])
78
79 # check if we're on MS Windows
80 AC_CHECK_HEADERS(
81 mmsystem.h,
82 have_windows=1,
83 have_windows=0,
84 [#include <windef.h>]
85 )
86 AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
87
88 AC_MSG_CHECKING([whether UNIX98 compatible])
89 AC_LANG_SAVE
90 AC_LANG_C
91 AC_TRY_RUN([
92 #ifndef _GNU_SOURCE
93 #define _GNU_SOURCE 1
94 #endif
95 #include <features.h>
96 void main(void) {
97 #if _XOPEN_SOURCE >= 500
98 exit(0); /* UNIX98 compatible */
99 #else
100 exit(-1); /* not UNIX98 compatible */
101 #endif
102 }
103 ],
104 have_unix98="yes",
105 have_unix98="no",
106 have_unix98="no"
107 )
108 AC_LANG_RESTORE
109 AC_MSG_RESULT([$have_unix98])
110 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
111 if test "x$HAVE_UNIX98" = "x"; then
112 echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
113 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
114 echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
115 echo "have a UNIX98 compatible system."
116 exit -1;
117 fi
118 fi
119
120 # check for <features.h>
121 AC_CHECK_HEADERS(features.h)
122
123 # test for POSIX thread library
124 m4_ifdef([m4_include(m4/pthread.m4)],,
125 [sinclude([m4/pthread.m4])])
126 ACX_PTHREAD
127 LIBS="$PTHREAD_LIBS $LIBS"
128 CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
129 CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
130 CC="$PTHREAD_CC"
131
132 # check for a bug in NPTL-enabled glibc
133 # (see Gentoo bug report #194076)
134 AC_ARG_ENABLE(nptl-bug-check,
135 [ --disable-nptl-bug-check
136 Disable check for a bug in certain NPTL-enabled
137 glibc versions that caused crashs.],
138 [config_check_nptl_bug="$enableval"],
139 [config_check_nptl_bug="yes"]
140 )
141 if test "$config_check_nptl_bug" = "yes"; then
142 m4_ifdef([m4_include(m4/nptl_bug.m4)],,
143 [sinclude([m4/nptl_bug.m4])])
144 ACX_NPTL_GLIBC_BUG([
145 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
146 echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
147 echo "probably crash due to this. Please report us the system you are"
148 echo "using and/or file a bug report to the bug tracking system of"
149 echo "your distribution."
150 echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
151 echo "well, you can try to circumvent this problem for now by setting"
152 echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
153 echo "should cause this test to pass."
154 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
155 AC_MSG_ERROR([possibly NPTL glibc bug detected])
156 ])
157 else
158 echo "NPTL glibc bug check disabled"
159 fi
160
161 # FIXME: this is actually a dependency of libgig, not of LS directly, why
162 # isn't it hidden by libgig?
163 AC_CHECK_HEADERS(uuid/uuid.h)
164 AC_SEARCH_LIBS(uuid_generate, uuid)
165
166
167
168 ###########################################################################
169 # Checks for available audio and MIDI systems / drivers
170 # (we throw an error if there's not at least one system for audio output and MIDI input available)
171
172 have_midi_input_driver="false"
173 have_audio_output_driver="false"
174
175 # ALSA
176 AC_ARG_ENABLE(alsa-driver,
177 [ --disable-alsa-driver
178 Disable support for the Advanced Linux Sound
179 Architecture (ALSA).],
180 [config_alsa_driver="$enableval"],
181 [config_alsa_driver="yes"]
182 )
183 have_alsa=0
184 if test "$config_alsa_driver" = "yes"; then
185 AC_CHECK_HEADER(alsa/asoundlib.h,
186 AC_CHECK_LIB(asound, main,
187 have_alsa=1
188 ,
189 have_alsa=0
190 )
191 ,
192 have_alsa=0
193 )
194 if test "$have_alsa" = "1"; then
195 have_midi_input_driver="true"
196 have_audio_output_driver="true";
197 fi
198
199 echo -n "checking Alsa version... "
200 AC_LANG_SAVE
201 AC_LANG_C
202 AC_TRY_RUN([
203 #include <alsa/asoundlib.h>
204 void main(void) {
205 /* ensure backward compatibility */
206 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
207 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
208 #endif
209 exit(SND_LIB_MAJOR);
210 }
211 ],
212 alsa_major=0,
213 alsa_major=$?,
214 alsa_major=0
215 )
216 AC_TRY_RUN([
217 #include <alsa/asoundlib.h>
218 void main(void) {
219 /* ensure backward compatibility */
220 #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
221 #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
222 #endif
223 exit(SND_LIB_MINOR);
224 }
225 ],
226 alsa_minor=0,
227 alsa_minor=$?,
228 alsa_minor=0
229 )
230 AC_TRY_RUN([
231 #include <alsa/asoundlib.h>
232 void main(void) {
233 /* ensure backward compatibility */
234 #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
235 #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
236 #endif
237 exit(SND_LIB_SUBMINOR);
238 }
239 ],
240 alsa_subminor=0,
241 alsa_subminor=$?,
242 alsa_subminor=0
243 )
244 AC_LANG_RESTORE
245 echo "$alsa_major.$alsa_minor.$alsa_subminor";
246 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
247 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
248 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
249 else
250 echo "ALSA support disabled by configure script parameter"
251 fi
252 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
253 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
254 config_have_alsa="no"
255 if test $have_alsa = "1"; then
256 config_have_alsa="yes"
257 fi
258
259 # JACK
260 AC_ARG_ENABLE(jack-driver,
261 [ --disable-jack-driver
262 Disable support for the Jack Audio Connection Kit
263 (JACK).],
264 [config_jack_driver="$enableval"],
265 [config_jack_driver="yes"]
266 )
267 have_jack=0
268 if test "$config_jack_driver" = "yes"; then
269 PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
270 if test $have_jack = "1"; then
271 AC_SUBST(JACK_LIBS)
272 AC_SUBST(JACK_CFLAGS)
273 linuxsampler_save_LIBS=$LIBS
274 LIBS="$JACK_LIBS $LIBS"
275 AC_CHECK_FUNCS(jack_client_name_size jack_client_open)
276 LIBS=$linuxsampler_save_LIBS
277 have_audio_output_driver="true";
278 fi
279 else
280 echo "JACK support disabled by configure script parameter"
281 fi
282 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
283 AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
284 config_have_jack="no"
285 if test $have_jack = "1"; then
286 config_have_jack="yes"
287 fi
288
289 # JACK MIDI
290 have_jack_midi=0
291 if test $have_jack = "1"; then
292 linuxsampler_save_CFLAGS=$CFLAGS
293 linuxsampler_save_LIBS=$LIBS
294 CFLAGS="$JACK_CFLAGS $CFLAGS"
295 LIBS="$JACK_LIBS $LIBS"
296 AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
297 if test $have_jack_midi = "1"; then
298 AC_CHECK_FUNCS(jack_midi_get_event_count)
299 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
300 jack_midi_clear_buffer(0, 0);
301 ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
302 [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
303 have_midi_input_driver="true"
304 fi
305 CFLAGS=$linuxsampler_save_CFLAGS
306 LIBS=$linuxsampler_save_LIBS
307 fi
308 AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
309 AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
310 [Define to 1 if you have JACK with MIDI support installed.])
311 config_have_jack_midi="no"
312 if test $have_jack_midi = "1"; then
313 config_have_jack_midi="yes"
314 fi
315
316 # ARTS
317 AC_ARG_ENABLE(arts-driver,
318 [ --disable-arts-driver
319 Disable support for the Analogue Realtime System
320 (aRts).],
321 [config_arts_driver="$enableval"],
322 [config_arts_driver="yes"]
323 )
324 have_arts=0
325 if test "$config_arts_driver" = "yes"; then
326 m4_ifdef([m4_include(m4/arts.m4)],,
327 [sinclude([m4/arts.m4])])
328 AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
329 if test "$have_arts" = "1"; then
330 have_audio_output_driver="true"
331 fi
332 else
333 echo "ARTS support disabled by configure script parameter"
334 fi
335 AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
336 AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
337 config_have_arts="no"
338 if test $have_arts = "1"; then
339 config_have_arts="yes"
340 fi
341
342 # ASIO AUDIO (Win32)
343 AC_ARG_ENABLE(asiosdk-dir,
344 [ --enable-asiosdk-dir
345 Directory where the ASIO SDK is located, this automatically
346 enables the compilation of the ASIO audio output driver.],
347 [config_asiosdk_dir="${enableval}"],
348 [config_asiosdk_dir="."]
349 )
350 AC_SUBST(config_asiosdk_dir)
351
352 AC_ARG_ENABLE(asio-driver,
353 [ --disable-asio-driver
354 Disable support for the Windows ASIO driver.],
355 [config_asio_driver="$enableval"],
356 [config_asio_driver="yes"]
357 )
358 have_asio=0
359 ASIOSDK_BASEDIR=
360 if test "$config_asio_driver" = "yes"; then
361 asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
362 echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
363 if test -e $asiosdk_headerfile ; then
364 echo yes
365 have_asio=1
366 ASIOSDK_BASEDIR="$config_asiosdk_dir"
367 else
368 echo no
369 have_asio=0
370 fi
371 if test "$have_asio" = "1"; then
372 have_audio_output_driver="true"
373 fi
374 else
375 echo "Windows ASIO support disabled by configure script parameter"
376 fi
377 AC_SUBST(ASIOSDK_BASEDIR)
378 AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
379 AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
380 config_have_asio="no"
381 if test $have_asio = "1"; then
382 config_have_asio="yes"
383 fi
384
385 # MidiShare (Linux, OS X, Windows)
386 AC_ARG_ENABLE(midishare-driver,
387 [ --disable-midishare-driver
388 Disable support for the MidiShare system.],
389 [config_midishare_driver="$enableval"],
390 [config_midishare_driver="yes"]
391 )
392 have_midishare=0
393 if test "$config_midishare_driver" = "yes"; then
394 AC_CHECK_HEADER(MidiShare.h,
395 AC_CHECK_LIB(MidiShare, MidiCountEvs,
396 have_midishare=1,
397 have_midishare=0
398 )
399 ,
400 have_midishare=0
401 )
402 if test "$have_midishare" = "1"; then
403 have_midi_input_driver="true"
404 fi
405 else
406 echo "MidiShare support disabled by configure script parameter"
407 fi
408 AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
409 AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
410 config_have_midishare="no"
411 if test $have_midishare = "1"; then
412 config_have_midishare="yes"
413 fi
414
415 # CoreMIDI (OS X)
416 AC_ARG_ENABLE(coremidi-driver,
417 [ --disable-coremidi-driver
418 Disable support for the Apple CoreMIDI system.],
419 [config_coremidi_driver="$enableval"],
420 [config_coremidi_driver="yes"]
421 )
422 have_coremidi=0
423 if test "$config_coremidi_driver" = "yes"; then
424 AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
425 have_coremidi=1,
426 have_coremidi=0
427 )
428 if test "$have_coremidi" = "1"; then
429 have_midi_input_driver="true"
430 fi
431 else
432 echo "CoreMIDI support disabled by configure script parameter"
433 fi
434 AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
435 AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
436 config_have_coremidi="no"
437 if test $have_coremidi = "1"; then
438 config_have_coremidi="yes"
439 fi
440
441 # CoreAudio (OS X)
442 AC_ARG_ENABLE(coreaudio-driver,
443 [ --disable-coreaudio-driver
444 Disable support for the Apple CoreAudio system.],
445 [config_coreaudio_driver="$enableval"],
446 [config_coreaudio_driver="yes"]
447 )
448 have_coreaudio=0
449 if test "$config_coreaudio_driver" = "yes"; then
450 AC_CHECK_HEADER(CoreAudio/CoreAudio.h,
451 have_coreaudio=1,
452 have_coreaudio=0
453 )
454 if test "$have_coreaudio" = "1"; then
455 have_audio_output_driver="true"
456 fi
457 else
458 echo "CoreAudio support disabled by configure script parameter"
459 fi
460 AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1")
461 AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.])
462 config_have_coreaudio="no"
463 if test $have_coreaudio = "1"; then
464 config_have_coreaudio="yes"
465 fi
466
467 # MME MIDI (Win32)
468 AC_ARG_ENABLE(mmemidi-driver,
469 [ --disable-mmemidi-driver
470 Disable support for the Windows MME MIDI system.],
471 [config_mmemidi_driver="$enableval"],
472 [config_mmemidi_driver="yes"]
473 )
474 have_mmemidi=0
475 if test "$config_mmemidi_driver" = "yes"; then
476 AC_CHECK_HEADERS(mmsystem.h,
477 have_mmemidi=1,
478 have_mmemidi=0
479 )
480 if test "$have_mmemidi" = "1"; then
481 have_midi_input_driver="true"
482 fi
483 else
484 echo "MME MIDI support disabled by configure script parameter"
485 fi
486 AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
487 AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
488 config_have_mme="no"
489 if test $have_mmemidi = "1"; then
490 config_have_mme="yes"
491 fi
492
493 # DSSI
494 AC_CHECK_HEADERS(dssi.h,
495 config_have_dssi="yes",
496 config_have_dssi="no")
497 AM_CONDITIONAL(HAVE_DSSI, test $config_have_dssi = "yes")
498
499 # LV2
500 PKG_CHECK_MODULES(LV2, lv2core, config_have_lv2="yes", config_have_lv2="no")
501 if test $config_have_lv2 = "no"; then
502 AC_CHECK_HEADER(lv2.h, config_have_lv2="yes", config_have_lv2="no")
503 fi
504 AM_CONDITIONAL(HAVE_LV2, test $config_have_lv2 = "yes")
505
506 # VST
507 AC_ARG_ENABLE(vstsdk-dir,
508 [ --enable-vstsdk-dir
509 Directory where the VST SDK is located.
510 This automatically enables the compilation
511 of the VST plugin.],
512 [VSTSDK_DIR="${enableval}"],
513 [VSTSDK_DIR=]
514 )
515 AC_SUBST(VSTSDK_DIR)
516 AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
517 config_have_vst="no"
518 if test "x$VSTSDK_DIR" != "x"; then
519 config_have_vst="yes"
520 fi
521
522 # AU
523 AC_CHECK_HEADERS(AudioUnit/AudioUnit.h,
524 config_have_au="yes",
525 config_have_au="no")
526 AM_CONDITIONAL(HAVE_AU, test $config_have_au = "yes")
527 AM_CONDITIONAL(HAVE_AUFLAGS, test "$AUFLAGS" != "")
528
529
530 # have we found at least one MIDI input and one audio output driver ?
531 if test "$have_midi_input_driver" = "false"; then
532 echo "No supported MIDI input system found!"
533 echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
534 echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
535 echo "If you think you have one of those available on your system, make sure you"
536 echo "also have the respective development (header) files installed."
537 exit -1;
538 fi
539 if test "$have_audio_output_driver" = "false"; then
540 echo "No supported audio output system found!"
541 echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
542 echo "driver at the moment!"
543 exit -1;
544 fi
545
546
547
548 ###########################################################################
549 # Checks for various DLL libraries
550
551 # Check presence of libgig
552 libgig_version="3.2.1"
553 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
554 if test "$HAVE_GIG" = "false"; then
555 echo "Required libgig version not found!"
556 echo "You need to have libgig version ${libgig_version} installed!"
557 exit -1;
558 else
559 echo "yes, found libgig $libgig_version"
560 fi
561 AC_SUBST(GIG_CFLAGS)
562 AC_SUBST(GIG_LIBS)
563
564 # Instruments DB feature (requires SQLite 3.3)
565 AC_ARG_ENABLE(instruments-db,
566 [ --disable-instruments-db
567 Disable compilation of the sampler's instruments
568 database feature. You need to have SQLite 3.3
569 or younger installed for this feature.],
570 [config_instruments_db="$enableval"],
571 [config_instruments_db="yes"]
572 )
573 HAVE_SQLITE3=0;
574 if test "$config_instruments_db" = "yes"; then
575 # Check presence of sqlite3
576 sqlite_version="3.3"
577 PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
578 AC_SUBST(SQLITE3_LIBS)
579 AC_SUBST(SQLITE3_CFLAGS)
580 if test $HAVE_SQLITE3 = false; then
581 HAVE_SQLITE3=0
582 config_instruments_db="no"
583 echo "*** Required sqlite version not found!"
584 echo "*** You need to have sqlite version ${sqlite_version} or higher"
585 echo "*** for instruments database support to be enabled."
586 echo "*** Support for instruments DB will be disabled!"
587 else
588 HAVE_SQLITE3=1
589 fi
590 else
591 echo "Instruments DB feature disabled by configure script parameter"
592 fi
593 AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
594 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
595
596
597
598 ###########################################################################
599 # Handle Configuration Options
600
601 # TODO: should we use AC_ARG_VAR(variable, description) instead?
602
603 AC_ARG_ENABLE(asm,
604 [ --disable-asm
605 Enable hand-crafted assembly optimizations
606 (default=on). LinuxSampler provides CPU specific
607 assembly optimizations. This is currently limited
608 to just enter a fast (denormal) FPU mode on x86
609 platforms. There are currently no synthesis core
610 assembly optimizations anymore since LS 0.4.0],
611 [config_asm="$enableval"],
612 [config_asm="yes"]
613 )
614 if test "$config_asm" = "yes"; then
615 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
616 fi
617
618 AC_ARG_ENABLE(dev-mode,
619 [ --enable-dev-mode
620 Enable development mode (default=off). In that mode
621 we do some extra sanity checks here and there.
622 This helps to spot possible problems, but reduces
623 efficiency a bit],
624 [config_dev_mode="$enableval"],
625 [config_dev_mode="no"]
626 )
627 if test "$config_dev_mode" = "yes"; then
628 AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
629 fi
630
631 AC_ARG_ENABLE(debug-level,
632 [ --enable-debug-level
633 Specify verbosity of console messages (default=1).
634 The higher the value, the higher will be verbosity.
635 A value of 0 means no console output at all.
636 There's not really an upper limit but the usual
637 level of all messages is currently somewhere less
638 than 10.],
639 [config_debug_level="${enableval}"],
640 [config_debug_level="1"]
641 )
642 AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
643
644 AC_ARG_ENABLE(rt-exceptions,
645 [ --enable-rt-exceptions
646 Enable exceptions in the realtime thread
647 (default=no). If this is enabled, exceptions will
648 be thrown on critical errors in the realtime
649 context as well. Otherwise if disabled
650 segmentation faults will be forced by the
651 application on critical errors.],
652 [config_rt_exceptions="$enableval"],
653 [config_rt_exceptions="no"]
654 )
655 if test "$config_rt_exceptions" = "yes"; then
656 AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
657 fi
658
659 AC_ARG_ENABLE(pthread-testcancel,
660 [ --enable-pthread-testcancel
661 Enable pthread_testcancel() calls and avoid asynchronous
662 cancel of pthreads (default=no).],
663 [config_pthread_testcancel="$enableval"],
664 [config_pthread_testcancel="no"]
665 )
666 if test "$config_pthread_testcancel" = "yes"; then
667 AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
668 fi
669
670 AC_ARG_ENABLE(preload-samples,
671 [ --enable-preload-samples
672 Due to seeking and latency issues with hard drives
673 we have to cache a small part of samples' head in
674 RAM (default=32768). The higher this value the
675 more memory will be occupied for each sample, but
676 the safer this will be in regards of possible
677 droputs. A 'good' value depends on the running
678 system and usage dependant factors.],
679 [config_preload_samples="${enableval}"],
680 [config_preload_samples="32768"]
681 )
682 AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
683
684 AC_ARG_ENABLE(max-pitch,
685 [ --enable-max-pitch
686 Specify the maximum allowed pitch value in octaves
687 (default=4). To lower memory usage you might want
688 set a smaller value.],
689 [config_max_pitch="${enableval}"],
690 [config_max_pitch="4"]
691 )
692 AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
693
694 AC_ARG_ENABLE(max-events,
695 [ --enable-max-events
696 Specify the maximum allowed amount of events to be
697 processed per fragment (default=1024).],
698 [config_max_events="${enableval}"],
699 [config_max_events="1024"]
700 )
701 AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
702
703 AC_ARG_ENABLE(eg-bottom,
704 [ --enable-eg-bottom
705 Bottom limit of envelope generators
706 (default=0.001). Certain kinds of curve types like
707 exponential curves converge against 0 but never
708 reach 0. So we have to define a certain low value
709 after which we should consider all smaller values
710 to be 'almost zero'. The smaller this value, the
711 longer will voices survive in EG's release stage
712 and thus waste voices. If this value is too high
713 will cause click sounds though.],
714 [config_eg_bottom="${enableval}"],
715 [config_eg_bottom="0.001"]
716 )
717 AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
718
719 AC_ARG_ENABLE(eg-min-release-time,
720 [ --enable-eg-min-release-time
721 Specify the lowest allowed release time in seconds
722 (default=0.0025). This value will also be used to
723 ramp down voices on voice stealing. This value
724 should always be less than the period time of the
725 used audio driver, as in case of voice stealing
726 the killed voice needs to be completely ramped
727 down in the same fragment.],
728 [config_eg_min_release_time="${enableval}"],
729 [config_eg_min_release_time="0.0025"]
730 )
731 AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
732
733 AC_ARG_ENABLE(refill-streams,
734 [ --enable-refill-streams
735 Number of streams that should be refilled in each
736 disk thread cycle (default=4).],
737 [config_refill_streams="${enableval}"],
738 [config_refill_streams="4"]
739 )
740 AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
741
742 AC_ARG_ENABLE(stream-min-refill,
743 [ --enable-stream-min-refill
744 Minimum refill size for disk streams (default=1024).
745 The disk thread will go to sleep for a while if no
746 stream had to be refilled more than this value in
747 a disk thread cycle.],
748 [config_stream_min_refill="${enableval}"],
749 [config_stream_min_refill="1024"]
750 )
751 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
752
753 AC_ARG_ENABLE(stream-max-refill,
754 [ --enable-stream-max-refill
755 Maximum refill size for disk streams
756 (default=65536). The disk thread will refill
757 each stream only by a size of this value per
758 disk thread cycle.],
759 [config_stream_max_refill="${enableval}"],
760 [config_stream_max_refill="65536"]
761 )
762 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
763
764 AC_ARG_ENABLE(stream-size,
765 [ --enable-stream-size
766 Size of each stream's ring buffer in sample points
767 (default=262144).],
768 [config_stream_size="${enableval}"],
769 [config_stream_size="262144"]
770 )
771 AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
772
773 AC_ARG_ENABLE(max-streams,
774 [ --enable-max-streams
775 Initial maximum amount of disk streams
776 (default=90). This value can be changed at
777 runtime. It should always be higher than the
778 maximum amount of voices.],
779 [config_max_streams="${enableval}"],
780 [config_max_streams="90"]
781 )
782 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
783
784 AC_ARG_ENABLE(max-voices,
785 [ --enable-max-voices
786 Initial maximum amount of voices (default=64).
787 This value can be changed at runtime. It should
788 always be lower than the maximum amount of disk
789 streams.],
790 [config_max_voices="${enableval}"],
791 [config_max_voices="64"]
792 )
793 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
794
795 AC_ARG_ENABLE(subfragment-size,
796 [ --enable-subfragment-size
797 Every audio fragment will be splitted into
798 subfragments. Where each subfragment renders
799 audio with constant synthesis parameters. This is
800 done for efficiency reasons. This parameter
801 defines the default size of a subfragment in
802 sample points. A large value means less CPU time
803 whereas a low value means better audio quality
804 (default=32).],
805 [config_subfragment_size="${enableval}"],
806 [config_subfragment_size="32"]
807 )
808 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
809
810 AC_ARG_ENABLE(global-attenuation-default,
811 [ --enable-global-attenuation-default
812 To prevent clipping all samples will be lowered
813 in amplitude by this given default factor (can
814 be overridden at runtime).
815 (default=0.35)],
816 [config_global_attenuation_default="${enableval}"],
817 [config_global_attenuation_default="0.35"]
818 )
819 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
820
821 AC_ARG_ENABLE(voice-steal-algo,
822 [ --enable-voice-steal-algo
823 Voice stealing algorithm to be used. Currently
824 available options:
825 none:
826 Disable voice stealing completely.
827 oldestvoiceonkey (default):
828 Try to kill a voice on the same key first,
829 if no success, proceed with the oldest key.
830 oldestkey:
831 Try to kill a voice from the oldest active
832 key.],
833 [ if test ! "(" "${enableval}" = "none" \
834 -o "${enableval}" = "oldestvoiceonkey" \
835 -o "${enableval}" = "oldestkey" ")" ; then
836 AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
837 else
838 config_voice_steal_algo="${enableval}"
839 fi
840 ],
841 [config_voice_steal_algo="oldestvoiceonkey"]
842 )
843 AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
844
845 AC_ARG_ENABLE(sysex-buffer-size,
846 [ --enable-sysex-buffer-size
847 System Exclusive Message buffer size in kB
848 (default=2048).],
849 [config_sysex_buffer_size="${enableval}"],
850 [config_sysex_buffer_size="2048"]
851 )
852 AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
853
854 AC_ARG_ENABLE(force-filter,
855 [ --enable-force-filter
856 If enabled will force filter to be used even if
857 no usage was define in instrument patch files.
858 (default=no).],
859 [config_force_filter="$enableval"],
860 [config_force_filter="no"]
861 )
862 if test "$config_force_filter" = "yes"; then
863 AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
864 fi
865
866 AC_ARG_ENABLE(filter-cutoff-min,
867 [ --enable-filter-cutoff-min
868 Minimum filter cutoff frequency in Hz
869 (default=100.0).],
870 [config_filter_cutoff_min="${enableval}"],
871 [config_filter_cutoff_min="100.0"]
872 )
873 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
874
875 AC_ARG_ENABLE(filter-cutoff-max,
876 [ --enable-filter-cutoff-max
877 Maximum filter cutoff frequency in Hz
878 (default=10000.0).],
879 [config_filter_cutoff_max="${enableval}"],
880 [config_filter_cutoff_max="10000.0"]
881 )
882 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
883
884 AC_ARG_ENABLE(override-cutoff-ctrl,
885 [ --enable-override-cutoff-ctrl
886 Override filter cutoff MIDI controller (default=no).
887 Note: you have to define the MIDI controller number
888 here, it's not a boolean parameter type! If this
889 option is used, controller number given by
890 instrument patch will be ignored and instead this
891 supplied value will be used.],
892 [config_override_cutoff_ctrl="${enableval}"],
893 [config_override_cutoff_ctrl="no"]
894 )
895 if test ! "$config_override_cutoff_ctrl" = "no"; then
896 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
897 fi
898
899 AC_ARG_ENABLE(override-resonance-ctrl,
900 [ --enable-override-resonance-ctrl
901 Override filter resonance MIDI controller
902 (default=no). Note: you have to define the MIDI
903 controller number here, it's not a boolean
904 parameter type! If this option is used, controller
905 number given by instrument patch will be ignored
906 and instead this supplied value will be used.],
907 [config_override_resonance_ctrl="${enableval}"],
908 [config_override_resonance_ctrl="no"]
909 )
910 if test ! "$config_override_resonance_ctrl" = "no"; then
911 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
912 fi
913
914 AC_ARG_ENABLE(override-filter-type,
915 [ --enable-override-filter-type
916 Override filter type (default=no). Options:
917 hp: for highpass
918 bp: for bandpass
919 br: for bandreject
920 lp: for lowpass
921 lpt: for lowpass turbo],
922 [ if test "${enableval}" = "hp" ; then
923 config_override_filter_type="::gig::vcf_type_highpass"
924 elif test "${enableval}" = "bp" ; then
925 config_override_filter_type="::gig::vcf_type_bandpass"
926 elif test "${enableval}" = "br" ; then
927 config_override_filter_type="::gig::vcf_type_bandreject"
928 elif test "${enableval}" = "lp" ; then
929 config_override_filter_type="::gig::vcf_type_lowpass"
930 elif test "${enableval}" = "lpt" ; then
931 config_override_filter_type="::gig::vcf_type_lowpassturbo"
932 elif test ! "${enableval}" = "no"; then
933 AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
934 fi
935 ],
936 [config_override_filter_type="no"]
937 )
938 if test ! "$config_override_filter_type" = "no"; then
939 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
940 fi
941
942 AC_ARG_ENABLE(gs-checksum,
943 [ --enable-gs-checksum
944 Enable Roland General Synth SysEx checksum check
945 (default=no). If this is enabled, all GS SysEx
946 messages which do not provide a correct checksum
947 will be ignored. This is disabled by default as
948 not all devices honor GS checksums.],
949 [config_assert_gs_sysex_checksum="$enableval"],
950 [config_assert_gs_sysex_checksum="no"]
951 )
952 if test "config_assert_gs_sysex_checksum" = "yes"; then
953 AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
954 fi
955
956 AC_ARG_ENABLE(portamento-time-min,
957 [ --enable-portamento-time-min
958 Minimum Portamento time in seconds
959 (default=0.1).],
960 [config_portamento_time_min="${enableval}"],
961 [config_portamento_time_min="0.1"]
962 )
963 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
964
965 AC_ARG_ENABLE(portamento-time-max,
966 [ --enable-portamento-time-max
967 Maximum Portamento time in seconds
968 (default=32).],
969 [config_portamento_time_max="${enableval}"],
970 [config_portamento_time_max="32"]
971 )
972 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
973
974 AC_ARG_ENABLE(portamento-time-default,
975 [ --enable-portamento-time-default
976 Default Portamento time in seconds
977 (default=1).],
978 [config_portamento_time_default="${enableval}"],
979 [config_portamento_time_default="1"]
980 )
981 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
982
983 AC_ARG_ENABLE(signed-triang-algo,
984 [ --enable-signed-triang-algo
985 Signed triangular wave algorithm to be used (e.g. for LFOs).
986 Currently available options:
987 intmath:
988 Uses integer math without any branch will then be
989 converted to floating point value for each sample point.
990 This int->float conversion might hurt on some systems.
991 intmathabs:
992 Similar to intmath but uses abs() function.
993 Depending on compiler and platrofm this could
994 perform better than integer math as it avoids
995 an extra integer multiply instruction.
996 diharmonic:
997 The triangular wave will be approximated by adding two
998 sinusoidials. This solution might especially hurt on
999 systems with weak floating point unit.
1000 benchmark (default):
1001 This is not an algorithm. Use this option if the
1002 appropriate algorithm should be automatically
1003 chosen by the configure script by performing a
1004 benchmark between the algorithms mentioned above.
1005 This will NOT work for cross compilation!],
1006 [ if test ! "(" "${enableval}" = "intmath" \
1007 -o "${enableval}" = "intmathabs" \
1008 -o "${enableval}" = "diharmonic" ")" ; then
1009 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
1010 else
1011 config_signed_triang_algo="${enableval}"
1012 fi
1013 ],
1014 [config_signed_triang_algo="benchmark"]
1015 )
1016
1017 AC_ARG_ENABLE(unsigned-triang-algo,
1018 [ --enable-unsigned-triang-algo
1019 Unsigned triangular wave algorithm to be used (e.g. for LFOs).
1020 Currently available options:
1021 intmath:
1022 Uses integer math without any branch will then be
1023 converted to floating point value for each sample point.
1024 This int->float conversion might hurt on some systems.
1025 intmathabs:
1026 Similar to intmath but uses abs() function.
1027 Depending on compiler and platrofm this could
1028 perform better than integer math as it avoids
1029 an extra integer multiply instruction.
1030 diharmonic:
1031 The triangular wave will be approximated by adding two
1032 sinusoidials. This solution might especially hurt on
1033 systems with weak floating point unit.
1034 benchmark (default):
1035 This is not an algorithm. Use this option if the
1036 appropriate algorithm should be automatically
1037 chosen by the configure script by performing a
1038 benchmark between the algorithms mentioned above.
1039 This will NOT work for cross compilation!],
1040 [ if test ! "(" "${enableval}" = "intmath" \
1041 -o "${enableval}" = "intmathabs" \
1042 -o "${enableval}" = "diharmonic" ")" ; then
1043 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
1044 else
1045 config_unsigned_triang_algo="${enableval}"
1046 fi
1047 ],
1048 [config_unsigned_triang_algo="benchmark"]
1049 )
1050
1051 AC_ARG_ENABLE(process-muted-channels,
1052 [ --enable-process-muted-channels
1053 Enable processing of muted channels (default=no).
1054 In that mode all MIDI events in the muted channels
1055 will be processed. This will provide information
1056 about the active voices in the muted channels and
1057 will not discard notes, triggered in mute mode,
1058 when the channel is unmuted. But also will reduce
1059 the efficiency.],
1060 [config_process_muted_channels="$enableval"],
1061 [config_process_muted_channels="no"]
1062 )
1063 if test "$config_process_muted_channels" = "yes"; then
1064 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
1065 fi
1066
1067 AC_ARG_ENABLE(process-all-notes-off,
1068 [ --disable-process-all-notes-off
1069 Disable interpretation of All-Notes-Off MIDI
1070 messages (default=on). By default LS will release
1071 all voices whenever it receives an All-Notes-Off
1072 MIDI message. You can disable this behavior, so
1073 that LS simply ignores such messages.],
1074 [config_process_all_notes_off="$enableval"],
1075 [config_process_all_notes_off="yes"]
1076 )
1077 if test "$config_process_all_notes_off" = "yes"; then
1078 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
1079 fi
1080
1081 AC_ARG_ENABLE(interpolate-volume,
1082 [ --disable-interpolate-volume
1083 Disable interpolation of volume modulation
1084 (default=on). With this enabled, the volume changes
1085 generated by for example the envelope generator
1086 will be smoother, minimizing the risk for audio
1087 clicks. Disable it to reduce CPU usage.],
1088 [config_interpolate_volume="$enableval"],
1089 [config_interpolate_volume="yes"]
1090 )
1091 if test "$config_interpolate_volume" = "yes"; then
1092 AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
1093 fi
1094
1095 AC_ARG_ENABLE(master-volume-sysex-by-port,
1096 [ --enable-master-volume-sysex-by-port
1097 Whether global volume sysex message should be
1098 applied globally to the whole sampler or only to
1099 the sampler channels connected to the same MIDI
1100 input port on which the sysex message arrived on.
1101 By default global volume sysex messages apply
1102 globally to the whole sampler, since many MIDI
1103 devices behave that way.],
1104 [config_master_volume_sysex_by_port="$enableval"],
1105 [config_master_volume_sysex_by_port="no"]
1106 )
1107 if test "$config_master_volume_sysex_by_port" = "yes"; then
1108 AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
1109 fi
1110
1111 AC_ARG_ENABLE(plugin-dir,
1112 [ --enable-plugin-dir
1113 Directory where the sampler shall look for potential plugins,
1114 that is 3rd party shared libraries that should be loaded by
1115 the sampler on startup. By default the sampler will search
1116 for plugins in the subdirectory "plugins" below its own
1117 library directory.
1118 (i.e. /usr/local/lib/linuxsampler/plugins)],
1119 [config_plugin_dir="${enableval}"],
1120 [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1121 )
1122 AC_SUBST(config_plugin_dir)
1123
1124 AC_ARG_ENABLE(default-instruments-db-location,
1125 [ --enable-default-instruments-db-location
1126 Only when instruments DB feature is enabled: file name
1127 which shall be taken as default location of the
1128 instruments DB file. This location can still be
1129 overridden at runtime with a command line switch.
1130 (default: /var/lib/linuxsampler/instruments.db)],
1131 [config_default_instruments_db_file="${enableval}"],
1132 [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1133 )
1134 AC_DEFINE_UNQUOTED(
1135 CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1136 "$config_default_instruments_db_file",
1137 [Only when instruments DB feature is enabled: default location of the DB file.]
1138 )
1139 AC_SUBST(config_default_instruments_db_file)
1140
1141
1142 ###########################################################################
1143 # Automatic Benchmarks (to detect the best algorithms for the system)
1144
1145 AC_LANG_SAVE
1146
1147 if test "$config_signed_triang_algo" = "benchmark"; then
1148 echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1149 AC_LANG_CPLUSPLUS
1150 AC_TRY_RUN([
1151 #define SIGNED 1
1152 #define SILENT 1
1153 #include "${srcdir}/benchmarks/triang.cpp"
1154 ],
1155 triang_signed=0,
1156 triang_signed=$?,
1157 triang_signed=0
1158 )
1159 if test "$triang_signed" = "2"; then
1160 config_signed_triang_algo="intmath"
1161 echo "integer math"
1162 elif test "$triang_signed" = "3"; then
1163 config_signed_triang_algo="diharmonic"
1164 echo "di harmonics"
1165 elif test "$triang_signed" = "5"; then
1166 config_signed_triang_algo="intmathabs"
1167 echo "integer math using abs()"
1168 else
1169 echo "Benchmark of signed triangular wave algorithms failed!"
1170 echo "Maybe you are doing cross compilation? In that case you have to select"
1171 echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1172 echo "Call './configure --help' for further information or read configure.in."
1173 exit -1;
1174 fi
1175 else
1176 case "$config_signed_triang_algo" in
1177 intmath)
1178 triang_signed=2 ;;
1179 diharmonic)
1180 triang_signed=3 ;;
1181 intmathabs)
1182 triang_signed=5 ;;
1183 esac
1184 fi
1185 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1186
1187 if test "$config_unsigned_triang_algo" = "benchmark"; then
1188 echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1189 AC_LANG_CPLUSPLUS
1190 AC_TRY_RUN([
1191 #define SIGNED 0
1192 #define SILENT 1
1193 #include "${srcdir}/benchmarks/triang.cpp"
1194 ],
1195 triang_unsigned=0,
1196 triang_unsigned=$?,
1197 triang_unsigned=0
1198 )
1199 if test "$triang_unsigned" = "2"; then
1200 config_unsigned_triang_algo="intmath"
1201 echo "integer math"
1202 elif test "$triang_unsigned" = "3"; then
1203 config_unsigned_triang_algo="diharmonic"
1204 echo "di harmonics"
1205 elif test "$triang_unsigned" = "5"; then
1206 config_unsigned_triang_algo="intmathabs"
1207 echo "integer math using abs()"
1208 else
1209 echo "Benchmark of unsigned triangular wave algorithms failed!"
1210 echo "Maybe you are doing cross compilation? In that case you have to select"
1211 echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1212 echo "Call './configure --help' for further information or read configure.in."
1213 exit -1;
1214 fi
1215 else
1216 case "$config_unsigned_triang_algo" in
1217 intmath)
1218 triang_unsigned=2 ;;
1219 diharmonic)
1220 triang_unsigned=3 ;;
1221 intmathabs)
1222 triang_unsigned=5 ;;
1223 esac
1224 fi
1225 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1226
1227 AC_LANG_RESTORE
1228
1229
1230 ###########################################################################
1231 # Create Build Files
1232
1233 AM_CONFIG_HEADER(config.h)
1234 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1235
1236 AC_LANG_CPLUSPLUS
1237
1238 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1239 # this, the dlfcn.h check in am_prog_libtool may fail.
1240 AC_CHECK_HEADER(stdlib.h)
1241
1242 AC_OUTPUT( \
1243 Makefile \
1244 man/Makefile \
1245 man/linuxsampler.1 \
1246 src/Makefile \
1247 src/db/Makefile \
1248 src/network/Makefile \
1249 src/engines/Makefile \
1250 src/engines/gig/Makefile \
1251 src/engines/common/Makefile \
1252 src/effects/Makefile \
1253 src/common/Makefile \
1254 src/testcases/Makefile \
1255 src/drivers/Makefile \
1256 src/drivers/audio/Makefile \
1257 src/drivers/midi/Makefile \
1258 src/plugins/Makefile \
1259 src/hostplugins/Makefile \
1260 src/hostplugins/dssi/Makefile \
1261 src/hostplugins/lv2/Makefile \
1262 src/hostplugins/vst/Makefile \
1263 src/hostplugins/au/Makefile \
1264 linuxsampler.spec \
1265 debian/Makefile \
1266 Artwork/Makefile \
1267 scripts/Makefile \
1268 osx/Makefile \
1269 osx/linuxsampler.xcodeproj/Makefile \
1270 Documentation/Makefile \
1271 Documentation/Engines/Makefile \
1272 Documentation/Engines/gig/Makefile \
1273 linuxsampler.pc \
1274 Doxyfile \
1275 )
1276
1277 # resolve all nested variables in '${config_plugin_dir}'
1278 # (merely for providing a human readable summary below)
1279 while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1280 config_plugin_dir=`eval echo ${config_plugin_dir}`
1281 done
1282
1283
1284 ###########################################################################
1285 # Output All Configuration Options
1286
1287 echo ""
1288 echo "#####################################################################"
1289 echo "# LinuxSampler Configuration #"
1290 echo "#-------------------------------------------------------------------#"
1291 echo "# Release Version: ${LINUXSAMPLER_RELEASE_MAJOR}.${LINUXSAMPLER_RELEASE_MINOR}.${LINUXSAMPLER_RELEASE_BUILD}"
1292 echo "# LSCP Version: ${LSCP_RELEASE_MAJOR}.${LSCP_RELEASE_MINOR}"
1293 echo "#-------------------------------------------------------------------"
1294 echo "# Assembly Optimizations: ${config_asm}"
1295 echo "# Development Mode: ${config_dev_mode}"
1296 echo "# Debug Level: ${config_debug_level}"
1297 echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1298 echo "# Preload Samples: ${config_preload_samples}"
1299 echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1300 echo "# Maximum Events: ${config_max_events}"
1301 echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1302 echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1303 echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1304 echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1305 echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1306 echo "# Stream Size: ${config_stream_size}"
1307 echo "# Default Maximum Disk Streams: ${config_max_streams}"
1308 echo "# Default Maximum Voices: ${config_max_voices}"
1309 echo "# Default Subfragment Size: ${config_subfragment_size}"
1310 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1311 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1312 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1313 echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1314 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1315 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1316 echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1317 echo "# Default Portamento Time: ${config_portamento_time_default} s"
1318 echo "# Force Filter Usage: ${config_force_filter}"
1319 echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1320 echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1321 echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1322 echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1323 echo "# Override Filter Type: ${config_override_filter_type}"
1324 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1325 echo "# Process Muted Channels: ${config_process_muted_channels}"
1326 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1327 echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
1328 echo "# Interpolate Volume: ${config_interpolate_volume}"
1329 echo "# Instruments database support: ${config_instruments_db}"
1330 if test "$config_instruments_db" = "yes"; then
1331 echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1332 fi
1333 echo "# Plugin Path: ${config_plugin_dir}"
1334 echo "#-------------------------------------------------------------------"
1335 echo "# MIDI Input Drivers:"
1336 echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack_midi}, CoreMIDI: ${config_have_coremidi}, MME: ${config_have_mme}, MidiShare: ${config_have_midishare}"
1337 echo "#-------------------------------------------------------------------"
1338 echo "# Audio Output Drivers:"
1339 echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack}, ARTS: ${config_have_arts}, CoreAudio: ${config_have_coreaudio}, ASIO: ${config_have_asio}"
1340 echo "#-------------------------------------------------------------------"
1341 echo "# Building sampler as plugin for following host standards:"
1342 echo "# DSSI: ${config_have_dssi}, LV2: ${config_have_lv2}, VST: ${config_have_vst}, AU: ${config_have_au}"
1343 echo "#-------------------------------------------------------------------#"
1344 echo "# Read './configure --help' or file 'configure.in' for details. #"
1345 echo "#####################################################################"
1346 echo ""
1347 echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1348 echo ""

  ViewVC Help
Powered by ViewVC