/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Contents of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 2024 - (show annotations) (download)
Sun Nov 1 18:46:45 2009 UTC (14 years, 4 months ago) by schoenebeck
Original Path: linuxsampler/trunk/configure.in
File size: 56289 byte(s)
* added support for sending MIDI CC messages via LSCP command
  "SEND CHANNEL MIDI_DATA CC <sampler-chan> <ctrl> <val>"
* bumped LSCP version to 1.5

1 AC_INIT(configure.in)
2
3 #------------------------------------------------------------------------------------
4 # LinuxSampler's / liblinuxsampler's "official" release version:
5
6 LINUXSAMPLER_RELEASE_MAJOR=1
7 LINUXSAMPLER_RELEASE_MINOR=0
8 LINUXSAMPLER_RELEASE_BUILD=0.cvs2
9
10 #------------------------------------------------------------------------------------
11 # The following is the libtool / shared library version. This doesn't have to
12 # do anything with the release version. It MUST conform to the following rules:
13 #
14 # 1. Start with version information of `0:0:0' for each libtool library.
15 # 2. Update the version information only immediately before a public release of
16 # your software. More frequent updates are unnecessary, and only guarantee
17 # that the current interface number gets larger faster.
18 # 3. If the library source code has changed at all since the last update, then
19 # increment revision (`c:r:a' becomes `c:r+1:a').
20 # 4. If any interfaces have been added, removed, or changed since the last update,
21 # increment current, and set revision to 0.
22 # 5. If any interfaces have been added since the last public release, then increment
23 # age.
24 # 6. If any interfaces have been removed since the last public release, then set age
25 # to 0.
26
27 LIBLINUXSAMPLER_LT_CURRENT=3
28 LIBLINUXSAMPLER_LT_REVISION=0
29 LIBLINUXSAMPLER_LT_AGE=0
30 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31
32 #------------------------------------------------------------------------------------
33 # the LSCP specification version this LinuSampler release complies with:
34
35 LSCP_RELEASE_MAJOR=1
36 LSCP_RELEASE_MINOR=5
37
38 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40
41 AC_PROG_CXX
42 AC_LIBTOOL_WIN32_DLL
43 AM_PROG_LIBTOOL
44
45 AC_SUBST(SHLIB_VERSION_ARG)
46 AC_SUBST(SHARED_VERSION_INFO)
47
48 AC_C_BIGENDIAN
49 AC_CANONICAL_HOST
50
51 PKG_PROG_PKG_CONFIG
52
53 ###########################################################################
54 # General Checks
55
56 AM_CONDITIONAL(CROSS_COMPILING, test $cross_compiling = yes)
57
58 AC_MSG_CHECKING([whether x86 architecture])
59 def_arch_x86=0
60 case $host_cpu in
61 "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
62 echo "yes"
63 def_arch_x86=1;;
64 *)
65 echo "no";;
66 esac
67 AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
68
69 # determine the right gcc switch for CPU specific optimizations
70 # (only if the user did not provide one)
71 CXX_CPU_SWITCH=
72 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
73 if test "$def_arch_x86" = 1 -a "$host_cpu" != "x86_64"; then
74 CXX_CPU_SWITCH="-march=$host_cpu"
75 elif test "$target_cpu" = "ppc"; then
76 CXX_CPU_SWITCH="-arch=$host_cpu"
77 fi
78 fi
79 AC_SUBST([CXX_CPU_SWITCH])
80
81 # check if we're on MS Windows
82 AC_CHECK_HEADERS(
83 mmsystem.h,
84 have_windows=1,
85 have_windows=0,
86 [#include <windef.h>]
87 )
88 AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
89
90 AC_MSG_CHECKING([whether UNIX98 compatible])
91 AC_LANG_SAVE
92 AC_LANG_C
93 AC_TRY_RUN([
94 #ifndef _GNU_SOURCE
95 #define _GNU_SOURCE 1
96 #endif
97 #include <features.h>
98 void main(void) {
99 #if _XOPEN_SOURCE >= 500
100 exit(0); /* UNIX98 compatible */
101 #else
102 exit(-1); /* not UNIX98 compatible */
103 #endif
104 }
105 ],
106 have_unix98="yes",
107 have_unix98="no",
108 have_unix98="no"
109 )
110 AC_LANG_RESTORE
111 AC_MSG_RESULT([$have_unix98])
112 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
113 if test "x$HAVE_UNIX98" = "x"; then
114 echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
115 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
116 echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
117 echo "have a UNIX98 compatible system."
118 exit -1;
119 fi
120 fi
121
122 # check for <features.h>
123 AC_CHECK_HEADERS(features.h)
124
125 # test for POSIX thread library
126 m4_ifdef([m4_include(m4/pthread.m4)],,
127 [sinclude([m4/pthread.m4])])
128 ACX_PTHREAD
129 LIBS="$PTHREAD_LIBS $LIBS"
130 CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
131 CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
132 CC="$PTHREAD_CC"
133
134 # check for a bug in NPTL-enabled glibc
135 # (see Gentoo bug report #194076)
136 AC_ARG_ENABLE(nptl-bug-check,
137 [ --disable-nptl-bug-check
138 Disable check for a bug in certain NPTL-enabled
139 glibc versions that caused crashs.],
140 [config_check_nptl_bug="$enableval"],
141 [config_check_nptl_bug="yes"]
142 )
143 if test "$config_check_nptl_bug" = "yes"; then
144 m4_ifdef([m4_include(m4/nptl_bug.m4)],,
145 [sinclude([m4/nptl_bug.m4])])
146 ACX_NPTL_GLIBC_BUG([
147 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
148 echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
149 echo "probably crash due to this. Please report us the system you are"
150 echo "using and/or file a bug report to the bug tracking system of"
151 echo "your distribution."
152 echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
153 echo "well, you can try to circumvent this problem for now by setting"
154 echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
155 echo "should cause this test to pass."
156 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
157 AC_MSG_ERROR([possibly NPTL glibc bug detected])
158 ])
159 else
160 echo "NPTL glibc bug check disabled"
161 fi
162
163 # FIXME: this is actually a dependency of libgig, not of LS directly, why
164 # isn't it hidden by libgig?
165 AC_CHECK_HEADERS(uuid/uuid.h)
166 AC_SEARCH_LIBS(uuid_generate, uuid)
167
168
169
170 ###########################################################################
171 # Checks for available audio and MIDI systems / drivers
172 # (we throw an error if there's not at least one system for audio output and MIDI input available)
173
174 have_midi_input_driver="false"
175 have_audio_output_driver="false"
176
177 # ALSA
178 AC_ARG_ENABLE(alsa-driver,
179 [ --disable-alsa-driver
180 Disable support for the Advanced Linux Sound
181 Architecture (ALSA).],
182 [config_alsa_driver="$enableval"],
183 [config_alsa_driver="yes"]
184 )
185 have_alsa=0
186 if test "$config_alsa_driver" = "yes"; then
187 AC_CHECK_HEADER(alsa/asoundlib.h,
188 AC_CHECK_LIB(asound, main,
189 have_alsa=1
190 ,
191 have_alsa=0
192 )
193 ,
194 have_alsa=0
195 )
196 if test "$have_alsa" = "1"; then
197 have_midi_input_driver="true"
198 have_audio_output_driver="true";
199 fi
200
201 echo -n "checking Alsa version... "
202 AC_LANG_SAVE
203 AC_LANG_C
204 AC_TRY_RUN([
205 #include <alsa/asoundlib.h>
206 void main(void) {
207 /* ensure backward compatibility */
208 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
209 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
210 #endif
211 exit(SND_LIB_MAJOR);
212 }
213 ],
214 alsa_major=0,
215 alsa_major=$?,
216 alsa_major=0
217 )
218 AC_TRY_RUN([
219 #include <alsa/asoundlib.h>
220 void main(void) {
221 /* ensure backward compatibility */
222 #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
223 #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
224 #endif
225 exit(SND_LIB_MINOR);
226 }
227 ],
228 alsa_minor=0,
229 alsa_minor=$?,
230 alsa_minor=0
231 )
232 AC_TRY_RUN([
233 #include <alsa/asoundlib.h>
234 void main(void) {
235 /* ensure backward compatibility */
236 #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
237 #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
238 #endif
239 exit(SND_LIB_SUBMINOR);
240 }
241 ],
242 alsa_subminor=0,
243 alsa_subminor=$?,
244 alsa_subminor=0
245 )
246 AC_LANG_RESTORE
247 echo "$alsa_major.$alsa_minor.$alsa_subminor";
248 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
249 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
250 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
251 else
252 echo "ALSA support disabled by configure script parameter"
253 fi
254 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
255 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
256 config_have_alsa="no"
257 if test $have_alsa = "1"; then
258 config_have_alsa="yes"
259 fi
260
261 # JACK
262 AC_ARG_ENABLE(jack-driver,
263 [ --disable-jack-driver
264 Disable support for the Jack Audio Connection Kit
265 (JACK).],
266 [config_jack_driver="$enableval"],
267 [config_jack_driver="yes"]
268 )
269 have_jack=0
270 if test "$config_jack_driver" = "yes"; then
271 PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
272 if test $have_jack = "1"; then
273 AC_SUBST(JACK_LIBS)
274 AC_SUBST(JACK_CFLAGS)
275 linuxsampler_save_LIBS=$LIBS
276 LIBS="$JACK_LIBS $LIBS"
277 AC_CHECK_FUNCS(jack_client_name_size jack_client_open)
278 LIBS=$linuxsampler_save_LIBS
279 have_audio_output_driver="true";
280 fi
281 else
282 echo "JACK support disabled by configure script parameter"
283 fi
284 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
285 AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
286 config_have_jack="no"
287 if test $have_jack = "1"; then
288 config_have_jack="yes"
289 fi
290
291 # JACK MIDI
292 have_jack_midi=0
293 if test $have_jack = "1"; then
294 linuxsampler_save_CFLAGS=$CFLAGS
295 linuxsampler_save_LIBS=$LIBS
296 CFLAGS="$JACK_CFLAGS $CFLAGS"
297 LIBS="$JACK_LIBS $LIBS"
298 AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
299 if test $have_jack_midi = "1"; then
300 AC_CHECK_FUNCS(jack_midi_get_event_count)
301 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
302 jack_midi_clear_buffer(0, 0);
303 ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
304 [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
305 have_midi_input_driver="true"
306 fi
307 CFLAGS=$linuxsampler_save_CFLAGS
308 LIBS=$linuxsampler_save_LIBS
309 fi
310 AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
311 AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
312 [Define to 1 if you have JACK with MIDI support installed.])
313 config_have_jack_midi="no"
314 if test $have_jack_midi = "1"; then
315 config_have_jack_midi="yes"
316 fi
317
318 # ARTS
319 AC_ARG_ENABLE(arts-driver,
320 [ --disable-arts-driver
321 Disable support for the Analogue Realtime System
322 (aRts).],
323 [config_arts_driver="$enableval"],
324 [config_arts_driver="yes"]
325 )
326 have_arts=0
327 if test "$config_arts_driver" = "yes"; then
328 m4_ifdef([m4_include(m4/arts.m4)],,
329 [sinclude([m4/arts.m4])])
330 AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
331 if test "$have_arts" = "1"; then
332 have_audio_output_driver="true"
333 fi
334 else
335 echo "ARTS support disabled by configure script parameter"
336 fi
337 AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
338 AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
339 config_have_arts="no"
340 if test $have_arts = "1"; then
341 config_have_arts="yes"
342 fi
343
344 # ASIO AUDIO (Win32)
345 AC_ARG_ENABLE(asiosdk-dir,
346 [ --enable-asiosdk-dir
347 Directory where the ASIO SDK is located, this automatically
348 enables the compilation of the ASIO audio output driver.],
349 [config_asiosdk_dir="${enableval}"],
350 [config_asiosdk_dir="."]
351 )
352 AC_SUBST(config_asiosdk_dir)
353
354 AC_ARG_ENABLE(asio-driver,
355 [ --disable-asio-driver
356 Disable support for the Windows ASIO driver.],
357 [config_asio_driver="$enableval"],
358 [config_asio_driver="yes"]
359 )
360 have_asio=0
361 ASIOSDK_BASEDIR=
362 if test "$config_asio_driver" = "yes"; then
363 asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
364 echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
365 if test -e $asiosdk_headerfile ; then
366 echo yes
367 have_asio=1
368 ASIOSDK_BASEDIR="$config_asiosdk_dir"
369 else
370 echo no
371 have_asio=0
372 fi
373 if test "$have_asio" = "1"; then
374 have_audio_output_driver="true"
375 fi
376 else
377 echo "Windows ASIO support disabled by configure script parameter"
378 fi
379 AC_SUBST(ASIOSDK_BASEDIR)
380 AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
381 AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
382 config_have_asio="no"
383 if test $have_asio = "1"; then
384 config_have_asio="yes"
385 fi
386
387 # MidiShare (Linux, OS X, Windows)
388 AC_ARG_ENABLE(midishare-driver,
389 [ --disable-midishare-driver
390 Disable support for the MidiShare system.],
391 [config_midishare_driver="$enableval"],
392 [config_midishare_driver="yes"]
393 )
394 have_midishare=0
395 if test "$config_midishare_driver" = "yes"; then
396 AC_CHECK_HEADER(MidiShare.h,
397 AC_CHECK_LIB(MidiShare, MidiCountEvs,
398 have_midishare=1,
399 have_midishare=0
400 )
401 ,
402 have_midishare=0
403 )
404 if test "$have_midishare" = "1"; then
405 have_midi_input_driver="true"
406 fi
407 else
408 echo "MidiShare support disabled by configure script parameter"
409 fi
410 AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
411 AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
412 config_have_midishare="no"
413 if test $have_midishare = "1"; then
414 config_have_midishare="yes"
415 fi
416
417 # CoreMIDI (OS X)
418 AC_ARG_ENABLE(coremidi-driver,
419 [ --disable-coremidi-driver
420 Disable support for the Apple CoreMIDI system.],
421 [config_coremidi_driver="$enableval"],
422 [config_coremidi_driver="yes"]
423 )
424 have_coremidi=0
425 if test "$config_coremidi_driver" = "yes"; then
426 AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
427 have_coremidi=1,
428 have_coremidi=0
429 )
430 if test "$have_coremidi" = "1"; then
431 have_midi_input_driver="true"
432 fi
433 else
434 echo "CoreMIDI support disabled by configure script parameter"
435 fi
436 AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
437 AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
438 config_have_coremidi="no"
439 if test $have_coremidi = "1"; then
440 config_have_coremidi="yes"
441 fi
442
443 # CoreAudio (OS X)
444 AC_ARG_ENABLE(coreaudio-driver,
445 [ --disable-coreaudio-driver
446 Disable support for the Apple CoreAudio system.],
447 [config_coreaudio_driver="$enableval"],
448 [config_coreaudio_driver="yes"]
449 )
450 have_coreaudio=0
451 if test "$config_coreaudio_driver" = "yes"; then
452 AC_CHECK_HEADER(CoreAudio/CoreAudio.h,
453 have_coreaudio=1,
454 have_coreaudio=0
455 )
456 if test "$have_coreaudio" = "1"; then
457 have_audio_output_driver="true"
458 fi
459 else
460 echo "CoreAudio support disabled by configure script parameter"
461 fi
462 AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1")
463 AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.])
464 config_have_coreaudio="no"
465 if test $have_coreaudio = "1"; then
466 config_have_coreaudio="yes"
467 fi
468
469 # MME MIDI (Win32)
470 AC_ARG_ENABLE(mmemidi-driver,
471 [ --disable-mmemidi-driver
472 Disable support for the Windows MME MIDI system.],
473 [config_mmemidi_driver="$enableval"],
474 [config_mmemidi_driver="yes"]
475 )
476 have_mmemidi=0
477 if test "$config_mmemidi_driver" = "yes"; then
478 AC_CHECK_HEADERS(mmsystem.h,
479 have_mmemidi=1,
480 have_mmemidi=0
481 )
482 if test "$have_mmemidi" = "1"; then
483 have_midi_input_driver="true"
484 fi
485 else
486 echo "MME MIDI support disabled by configure script parameter"
487 fi
488 AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
489 AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
490 config_have_mme="no"
491 if test $have_mmemidi = "1"; then
492 config_have_mme="yes"
493 fi
494
495 # DSSI
496 AC_CHECK_HEADERS(dssi.h,
497 config_have_dssi="yes",
498 config_have_dssi="no")
499 AM_CONDITIONAL(HAVE_DSSI, test $config_have_dssi = "yes")
500
501 # LV2
502 PKG_CHECK_MODULES(LV2, lv2core, config_have_lv2="yes", config_have_lv2="no")
503 if test $config_have_lv2 = "no"; then
504 AC_CHECK_HEADER(lv2.h, config_have_lv2="yes", config_have_lv2="no")
505 fi
506 AM_CONDITIONAL(HAVE_LV2, test $config_have_lv2 = "yes")
507
508 # VST
509 AC_ARG_ENABLE(vstsdk-dir,
510 [ --enable-vstsdk-dir
511 Directory where the VST SDK is located.
512 This automatically enables the compilation
513 of the VST plugin.],
514 [VSTSDK_DIR="${enableval}"],
515 [VSTSDK_DIR=]
516 )
517 AC_SUBST(VSTSDK_DIR)
518 AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
519 config_have_vst="no"
520 if test "x$VSTSDK_DIR" != "x"; then
521 config_have_vst="yes"
522 fi
523
524 # AU
525 AC_CHECK_HEADERS(AudioUnit/AudioUnit.h,
526 config_have_au="yes",
527 config_have_au="no")
528 AM_CONDITIONAL(HAVE_AU, test $config_have_au = "yes")
529 AM_CONDITIONAL(HAVE_AUFLAGS, test "$AUFLAGS" != "")
530
531
532 # have we found at least one MIDI input and one audio output driver ?
533 if test "$have_midi_input_driver" = "false"; then
534 echo "No supported MIDI input system found!"
535 echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
536 echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
537 echo "If you think you have one of those available on your system, make sure you"
538 echo "also have the respective development (header) files installed."
539 exit -1;
540 fi
541 if test "$have_audio_output_driver" = "false"; then
542 echo "No supported audio output system found!"
543 echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
544 echo "driver at the moment!"
545 exit -1;
546 fi
547
548
549
550 ###########################################################################
551 # Checks for various DLL libraries
552
553 # Check presence of libgig
554 libgig_version="3.3.0"
555 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
556 if test "$HAVE_GIG" = "false"; then
557 echo "Required libgig version not found!"
558 echo "You need to have libgig version ${libgig_version} installed!"
559 exit -1;
560 else
561 echo "yes, found libgig $libgig_version"
562 fi
563 AC_SUBST(GIG_CFLAGS)
564 AC_SUBST(GIG_LIBS)
565
566 # SF2 Engine (requires libgig)
567 AC_ARG_ENABLE(sf2-engine,
568 [ --disable-sf2-engine
569 Disable compilation of the SF2 engine.
570 You need to have libgig installed.],
571 [config_sf2_engine="$enableval"],
572 [config_sf2_engine="yes"]
573 )
574 HAVE_SF2=0;
575 if test "$config_sf2_engine" = "yes"; then
576 HAVE_SF2=1
577 else
578 echo "SF2 engine disabled by configure script parameter"
579 fi
580 AM_CONDITIONAL(HAVE_SF2, test $HAVE_SF2 = 1)
581 AC_DEFINE_UNQUOTED(HAVE_SF2,$HAVE_SF2,[Define to 1 if you want SF2 engine and have libsf2 installed.])
582 config_have_sf2="no"
583 if test $HAVE_SF2 = "1"; then
584 config_have_sf2="yes"
585 fi
586
587 # Check presence of libsndfile
588 libsndfile_version="1.0"
589 PKG_CHECK_MODULES(SNDFILE, sndfile >= $libsndfile_version, HAVE_SNDFILE=true, HAVE_SNDFILE=false)
590 if test "$HAVE_SNDFILE" = "false"; then
591 echo "Required libsndfile version not found!"
592 echo "You need to have libsndfile version ${libsndfile_version} installed!"
593 exit -1;
594 else
595 echo "yes, found libsndfile $libsndfile_version"
596 fi
597 AC_SUBST(SNDFILE_CFLAGS)
598 AC_SUBST(SNDFILE_LIBS)
599
600 # Instruments DB feature (requires SQLite 3.3)
601 AC_ARG_ENABLE(instruments-db,
602 [ --disable-instruments-db
603 Disable compilation of the sampler's instruments
604 database feature. You need to have SQLite 3.3
605 or younger installed for this feature.],
606 [config_instruments_db="$enableval"],
607 [config_instruments_db="yes"]
608 )
609 HAVE_SQLITE3=0;
610 if test "$config_instruments_db" = "yes"; then
611 # Check presence of sqlite3
612 sqlite_version="3.3"
613 PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
614 AC_SUBST(SQLITE3_LIBS)
615 AC_SUBST(SQLITE3_CFLAGS)
616 if test $HAVE_SQLITE3 = false; then
617 HAVE_SQLITE3=0
618 config_instruments_db="no"
619 echo "*** Required sqlite version not found!"
620 echo "*** You need to have sqlite version ${sqlite_version} or higher"
621 echo "*** for instruments database support to be enabled."
622 echo "*** Support for instruments DB will be disabled!"
623 else
624 HAVE_SQLITE3=1
625 fi
626 else
627 echo "Instruments DB feature disabled by configure script parameter"
628 fi
629 AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
630 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
631
632
633
634 ###########################################################################
635 # Handle Configuration Options
636
637 # TODO: should we use AC_ARG_VAR(variable, description) instead?
638
639 AC_ARG_ENABLE(asm,
640 [ --disable-asm
641 Enable hand-crafted assembly optimizations
642 (default=on). LinuxSampler provides CPU specific
643 assembly optimizations. This is currently limited
644 to just enter a fast (denormal) FPU mode on x86
645 platforms. There are currently no synthesis core
646 assembly optimizations anymore since LS 0.4.0],
647 [config_asm="$enableval"],
648 [config_asm="yes"]
649 )
650 if test "$config_asm" = "yes"; then
651 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
652 fi
653
654 AC_ARG_ENABLE(dev-mode,
655 [ --enable-dev-mode
656 Enable development mode (default=off). In that mode
657 we do some extra sanity checks here and there.
658 This helps to spot possible problems, but reduces
659 efficiency a bit],
660 [config_dev_mode="$enableval"],
661 [config_dev_mode="no"]
662 )
663 if test "$config_dev_mode" = "yes"; then
664 AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
665 fi
666
667 AC_ARG_ENABLE(debug-level,
668 [ --enable-debug-level
669 Specify verbosity of console messages (default=1).
670 The higher the value, the higher will be verbosity.
671 A value of 0 means no console output at all.
672 There's not really an upper limit but the usual
673 level of all messages is currently somewhere less
674 than 10.],
675 [config_debug_level="${enableval}"],
676 [config_debug_level="1"]
677 )
678 AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
679
680 AC_ARG_ENABLE(rt-exceptions,
681 [ --enable-rt-exceptions
682 Enable exceptions in the realtime thread
683 (default=no). If this is enabled, exceptions will
684 be thrown on critical errors in the realtime
685 context as well. Otherwise if disabled
686 segmentation faults will be forced by the
687 application on critical errors.],
688 [config_rt_exceptions="$enableval"],
689 [config_rt_exceptions="no"]
690 )
691 if test "$config_rt_exceptions" = "yes"; then
692 AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
693 fi
694
695 AC_ARG_ENABLE(pthread-testcancel,
696 [ --enable-pthread-testcancel
697 Enable pthread_testcancel() calls and avoid asynchronous
698 cancel of pthreads (default=no).],
699 [config_pthread_testcancel="$enableval"],
700 [config_pthread_testcancel="no"]
701 )
702 if test "$config_pthread_testcancel" = "yes"; then
703 AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
704 fi
705
706 AC_ARG_ENABLE(preload-samples,
707 [ --enable-preload-samples
708 Due to seeking and latency issues with hard drives
709 we have to cache a small part of samples' head in
710 RAM (default=32768). The higher this value the
711 more memory will be occupied for each sample, but
712 the safer this will be in regards of possible
713 droputs. A 'good' value depends on the running
714 system and usage dependant factors.],
715 [config_preload_samples="${enableval}"],
716 [config_preload_samples="32768"]
717 )
718 AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
719
720 AC_ARG_ENABLE(max-pitch,
721 [ --enable-max-pitch
722 Specify the maximum allowed pitch value in octaves
723 (default=4). To lower memory usage you might want
724 set a smaller value.],
725 [config_max_pitch="${enableval}"],
726 [config_max_pitch="4"]
727 )
728 AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
729
730 AC_ARG_ENABLE(max-events,
731 [ --enable-max-events
732 Specify the maximum allowed amount of events to be
733 processed per fragment (default=1024).],
734 [config_max_events="${enableval}"],
735 [config_max_events="1024"]
736 )
737 AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
738
739 AC_ARG_ENABLE(eg-bottom,
740 [ --enable-eg-bottom
741 Bottom limit of envelope generators
742 (default=0.001). Certain kinds of curve types like
743 exponential curves converge against 0 but never
744 reach 0. So we have to define a certain low value
745 after which we should consider all smaller values
746 to be 'almost zero'. The smaller this value, the
747 longer will voices survive in EG's release stage
748 and thus waste voices. If this value is too high
749 will cause click sounds though.],
750 [config_eg_bottom="${enableval}"],
751 [config_eg_bottom="0.001"]
752 )
753 AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
754
755 AC_ARG_ENABLE(eg-min-release-time,
756 [ --enable-eg-min-release-time
757 Specify the lowest allowed release time in seconds
758 (default=0.0025). This value will also be used to
759 ramp down voices on voice stealing. This value
760 should always be less than the period time of the
761 used audio driver, as in case of voice stealing
762 the killed voice needs to be completely ramped
763 down in the same fragment.],
764 [config_eg_min_release_time="${enableval}"],
765 [config_eg_min_release_time="0.0025"]
766 )
767 AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
768
769 AC_ARG_ENABLE(refill-streams,
770 [ --enable-refill-streams
771 Number of streams that should be refilled in each
772 disk thread cycle (default=4).],
773 [config_refill_streams="${enableval}"],
774 [config_refill_streams="4"]
775 )
776 AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
777
778 AC_ARG_ENABLE(stream-min-refill,
779 [ --enable-stream-min-refill
780 Minimum refill size for disk streams (default=1024).
781 The disk thread will go to sleep for a while if no
782 stream had to be refilled more than this value in
783 a disk thread cycle.],
784 [config_stream_min_refill="${enableval}"],
785 [config_stream_min_refill="1024"]
786 )
787 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
788
789 AC_ARG_ENABLE(stream-max-refill,
790 [ --enable-stream-max-refill
791 Maximum refill size for disk streams
792 (default=65536). The disk thread will refill
793 each stream only by a size of this value per
794 disk thread cycle.],
795 [config_stream_max_refill="${enableval}"],
796 [config_stream_max_refill="65536"]
797 )
798 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
799
800 AC_ARG_ENABLE(stream-size,
801 [ --enable-stream-size
802 Size of each stream's ring buffer in sample points
803 (default=262144).],
804 [config_stream_size="${enableval}"],
805 [config_stream_size="262144"]
806 )
807 AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
808
809 AC_ARG_ENABLE(max-streams,
810 [ --enable-max-streams
811 Initial maximum amount of disk streams
812 (default=90). This value can be changed at
813 runtime. It should always be higher than the
814 maximum amount of voices.],
815 [config_max_streams="${enableval}"],
816 [config_max_streams="90"]
817 )
818 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
819
820 AC_ARG_ENABLE(max-voices,
821 [ --enable-max-voices
822 Initial maximum amount of voices (default=64).
823 This value can be changed at runtime. It should
824 always be lower than the maximum amount of disk
825 streams.],
826 [config_max_voices="${enableval}"],
827 [config_max_voices="64"]
828 )
829 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
830
831 AC_ARG_ENABLE(subfragment-size,
832 [ --enable-subfragment-size
833 Every audio fragment will be splitted into
834 subfragments. Where each subfragment renders
835 audio with constant synthesis parameters. This is
836 done for efficiency reasons. This parameter
837 defines the default size of a subfragment in
838 sample points. A large value means less CPU time
839 whereas a low value means better audio quality
840 (default=32).],
841 [config_subfragment_size="${enableval}"],
842 [config_subfragment_size="32"]
843 )
844 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
845
846 AC_ARG_ENABLE(global-attenuation-default,
847 [ --enable-global-attenuation-default
848 To prevent clipping all samples will be lowered
849 in amplitude by this given default factor (can
850 be overridden at runtime).
851 (default=0.35)],
852 [config_global_attenuation_default="${enableval}"],
853 [config_global_attenuation_default="0.35"]
854 )
855 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
856
857 AC_ARG_ENABLE(voice-steal-algo,
858 [ --enable-voice-steal-algo
859 Voice stealing algorithm to be used. Currently
860 available options:
861 none:
862 Disable voice stealing completely.
863 oldestvoiceonkey (default):
864 Try to kill a voice on the same key first,
865 if no success, proceed with the oldest key.
866 oldestkey:
867 Try to kill a voice from the oldest active
868 key.],
869 [ if test ! "(" "${enableval}" = "none" \
870 -o "${enableval}" = "oldestvoiceonkey" \
871 -o "${enableval}" = "oldestkey" ")" ; then
872 AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
873 else
874 config_voice_steal_algo="${enableval}"
875 fi
876 ],
877 [config_voice_steal_algo="oldestvoiceonkey"]
878 )
879 AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
880
881 AC_ARG_ENABLE(sysex-buffer-size,
882 [ --enable-sysex-buffer-size
883 System Exclusive Message buffer size in kB
884 (default=2048).],
885 [config_sysex_buffer_size="${enableval}"],
886 [config_sysex_buffer_size="2048"]
887 )
888 AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
889
890 AC_ARG_ENABLE(force-filter,
891 [ --enable-force-filter
892 If enabled will force filter to be used even if
893 no usage was define in instrument patch files.
894 (default=no).],
895 [config_force_filter="$enableval"],
896 [config_force_filter="no"]
897 )
898 if test "$config_force_filter" = "yes"; then
899 AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
900 fi
901
902 AC_ARG_ENABLE(filter-cutoff-min,
903 [ --enable-filter-cutoff-min
904 Minimum filter cutoff frequency in Hz
905 (default=100.0).],
906 [config_filter_cutoff_min="${enableval}"],
907 [config_filter_cutoff_min="100.0"]
908 )
909 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
910
911 AC_ARG_ENABLE(filter-cutoff-max,
912 [ --enable-filter-cutoff-max
913 Maximum filter cutoff frequency in Hz
914 (default=10000.0).],
915 [config_filter_cutoff_max="${enableval}"],
916 [config_filter_cutoff_max="10000.0"]
917 )
918 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
919
920 AC_ARG_ENABLE(override-cutoff-ctrl,
921 [ --enable-override-cutoff-ctrl
922 Override filter cutoff MIDI controller (default=no).
923 Note: you have to define the MIDI controller number
924 here, it's not a boolean parameter type! If this
925 option is used, controller number given by
926 instrument patch will be ignored and instead this
927 supplied value will be used.],
928 [config_override_cutoff_ctrl="${enableval}"],
929 [config_override_cutoff_ctrl="no"]
930 )
931 if test ! "$config_override_cutoff_ctrl" = "no"; then
932 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
933 fi
934
935 AC_ARG_ENABLE(override-resonance-ctrl,
936 [ --enable-override-resonance-ctrl
937 Override filter resonance MIDI controller
938 (default=no). Note: you have to define the MIDI
939 controller number here, it's not a boolean
940 parameter type! If this option is used, controller
941 number given by instrument patch will be ignored
942 and instead this supplied value will be used.],
943 [config_override_resonance_ctrl="${enableval}"],
944 [config_override_resonance_ctrl="no"]
945 )
946 if test ! "$config_override_resonance_ctrl" = "no"; then
947 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
948 fi
949
950 AC_ARG_ENABLE(override-filter-type,
951 [ --enable-override-filter-type
952 Override filter type (default=no). Options:
953 hp: for highpass
954 bp: for bandpass
955 br: for bandreject
956 lp: for lowpass
957 lpt: for lowpass turbo],
958 [ if test "${enableval}" = "hp" ; then
959 config_override_filter_type="::gig::vcf_type_highpass"
960 elif test "${enableval}" = "bp" ; then
961 config_override_filter_type="::gig::vcf_type_bandpass"
962 elif test "${enableval}" = "br" ; then
963 config_override_filter_type="::gig::vcf_type_bandreject"
964 elif test "${enableval}" = "lp" ; then
965 config_override_filter_type="::gig::vcf_type_lowpass"
966 elif test "${enableval}" = "lpt" ; then
967 config_override_filter_type="::gig::vcf_type_lowpassturbo"
968 elif test ! "${enableval}" = "no"; then
969 AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
970 fi
971 ],
972 [config_override_filter_type="no"]
973 )
974 if test ! "$config_override_filter_type" = "no"; then
975 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
976 fi
977
978 AC_ARG_ENABLE(gs-checksum,
979 [ --enable-gs-checksum
980 Enable Roland General Synth SysEx checksum check
981 (default=no). If this is enabled, all GS SysEx
982 messages which do not provide a correct checksum
983 will be ignored. This is disabled by default as
984 not all devices honor GS checksums.],
985 [config_assert_gs_sysex_checksum="$enableval"],
986 [config_assert_gs_sysex_checksum="no"]
987 )
988 if test "config_assert_gs_sysex_checksum" = "yes"; then
989 AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
990 fi
991
992 AC_ARG_ENABLE(portamento-time-min,
993 [ --enable-portamento-time-min
994 Minimum Portamento time in seconds
995 (default=0.1).],
996 [config_portamento_time_min="${enableval}"],
997 [config_portamento_time_min="0.1"]
998 )
999 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
1000
1001 AC_ARG_ENABLE(portamento-time-max,
1002 [ --enable-portamento-time-max
1003 Maximum Portamento time in seconds
1004 (default=32).],
1005 [config_portamento_time_max="${enableval}"],
1006 [config_portamento_time_max="32"]
1007 )
1008 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
1009
1010 AC_ARG_ENABLE(portamento-time-default,
1011 [ --enable-portamento-time-default
1012 Default Portamento time in seconds
1013 (default=1).],
1014 [config_portamento_time_default="${enableval}"],
1015 [config_portamento_time_default="1"]
1016 )
1017 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
1018
1019 AC_ARG_ENABLE(signed-triang-algo,
1020 [ --enable-signed-triang-algo
1021 Signed triangular wave algorithm to be used (e.g. for LFOs).
1022 Currently available options:
1023 intmath:
1024 Uses integer math without any branch will then be
1025 converted to floating point value for each sample point.
1026 This int->float conversion might hurt on some systems.
1027 intmathabs:
1028 Similar to intmath but uses abs() function.
1029 Depending on compiler and platrofm this could
1030 perform better than integer math as it avoids
1031 an extra integer multiply instruction.
1032 diharmonic:
1033 The triangular wave will be approximated by adding two
1034 sinusoidials. This solution might especially hurt on
1035 systems with weak floating point unit.
1036 benchmark (default):
1037 This is not an algorithm. Use this option if the
1038 appropriate algorithm should be automatically
1039 chosen by the configure script by performing a
1040 benchmark between the algorithms mentioned above.
1041 This will NOT work for cross compilation!],
1042 [ if test ! "(" "${enableval}" = "intmath" \
1043 -o "${enableval}" = "intmathabs" \
1044 -o "${enableval}" = "diharmonic" ")" ; then
1045 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
1046 else
1047 config_signed_triang_algo="${enableval}"
1048 fi
1049 ],
1050 [config_signed_triang_algo="benchmark"]
1051 )
1052
1053 AC_ARG_ENABLE(unsigned-triang-algo,
1054 [ --enable-unsigned-triang-algo
1055 Unsigned triangular wave algorithm to be used (e.g. for LFOs).
1056 Currently available options:
1057 intmath:
1058 Uses integer math without any branch will then be
1059 converted to floating point value for each sample point.
1060 This int->float conversion might hurt on some systems.
1061 intmathabs:
1062 Similar to intmath but uses abs() function.
1063 Depending on compiler and platrofm this could
1064 perform better than integer math as it avoids
1065 an extra integer multiply instruction.
1066 diharmonic:
1067 The triangular wave will be approximated by adding two
1068 sinusoidials. This solution might especially hurt on
1069 systems with weak floating point unit.
1070 benchmark (default):
1071 This is not an algorithm. Use this option if the
1072 appropriate algorithm should be automatically
1073 chosen by the configure script by performing a
1074 benchmark between the algorithms mentioned above.
1075 This will NOT work for cross compilation!],
1076 [ if test ! "(" "${enableval}" = "intmath" \
1077 -o "${enableval}" = "intmathabs" \
1078 -o "${enableval}" = "diharmonic" ")" ; then
1079 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
1080 else
1081 config_unsigned_triang_algo="${enableval}"
1082 fi
1083 ],
1084 [config_unsigned_triang_algo="benchmark"]
1085 )
1086
1087 AC_ARG_ENABLE(process-muted-channels,
1088 [ --enable-process-muted-channels
1089 Enable processing of muted channels (default=no).
1090 In that mode all MIDI events in the muted channels
1091 will be processed. This will provide information
1092 about the active voices in the muted channels and
1093 will not discard notes, triggered in mute mode,
1094 when the channel is unmuted. But also will reduce
1095 the efficiency.],
1096 [config_process_muted_channels="$enableval"],
1097 [config_process_muted_channels="no"]
1098 )
1099 if test "$config_process_muted_channels" = "yes"; then
1100 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
1101 fi
1102
1103 AC_ARG_ENABLE(process-all-notes-off,
1104 [ --disable-process-all-notes-off
1105 Disable interpretation of All-Notes-Off MIDI
1106 messages (default=on). By default LS will release
1107 all voices whenever it receives an All-Notes-Off
1108 MIDI message. You can disable this behavior, so
1109 that LS simply ignores such messages.],
1110 [config_process_all_notes_off="$enableval"],
1111 [config_process_all_notes_off="yes"]
1112 )
1113 if test "$config_process_all_notes_off" = "yes"; then
1114 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
1115 fi
1116
1117 AC_ARG_ENABLE(interpolate-volume,
1118 [ --disable-interpolate-volume
1119 Disable interpolation of volume modulation
1120 (default=on). With this enabled, the volume changes
1121 generated by for example the envelope generator
1122 will be smoother, minimizing the risk for audio
1123 clicks. Disable it to reduce CPU usage.],
1124 [config_interpolate_volume="$enableval"],
1125 [config_interpolate_volume="yes"]
1126 )
1127 if test "$config_interpolate_volume" = "yes"; then
1128 AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
1129 fi
1130
1131 AC_ARG_ENABLE(master-volume-sysex-by-port,
1132 [ --enable-master-volume-sysex-by-port
1133 Whether global volume sysex message should be
1134 applied globally to the whole sampler or only to
1135 the sampler channels connected to the same MIDI
1136 input port on which the sysex message arrived on.
1137 By default global volume sysex messages apply
1138 globally to the whole sampler, since many MIDI
1139 devices behave that way.],
1140 [config_master_volume_sysex_by_port="$enableval"],
1141 [config_master_volume_sysex_by_port="no"]
1142 )
1143 if test "$config_master_volume_sysex_by_port" = "yes"; then
1144 AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
1145 fi
1146
1147 AC_ARG_ENABLE(plugin-dir,
1148 [ --enable-plugin-dir
1149 Directory where the sampler shall look for potential plugins,
1150 that is 3rd party shared libraries that should be loaded by
1151 the sampler on startup. By default the sampler will search
1152 for plugins in the subdirectory "plugins" below its own
1153 library directory.
1154 (i.e. /usr/local/lib/linuxsampler/plugins)],
1155 [config_plugin_dir="${enableval}"],
1156 [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1157 )
1158 AC_SUBST(config_plugin_dir)
1159
1160 AC_ARG_ENABLE(default-instruments-db-location,
1161 [ --enable-default-instruments-db-location
1162 Only when instruments DB feature is enabled: file name
1163 which shall be taken as default location of the
1164 instruments DB file. This location can still be
1165 overridden at runtime with a command line switch.
1166 (default: /var/lib/linuxsampler/instruments.db)],
1167 [config_default_instruments_db_file="${enableval}"],
1168 [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1169 )
1170 AC_DEFINE_UNQUOTED(
1171 CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1172 "$config_default_instruments_db_file",
1173 [Only when instruments DB feature is enabled: default location of the DB file.]
1174 )
1175 AC_SUBST(config_default_instruments_db_file)
1176
1177
1178 ###########################################################################
1179 # Automatic Benchmarks (to detect the best algorithms for the system)
1180
1181 AC_LANG_SAVE
1182
1183 if test "$config_signed_triang_algo" = "benchmark"; then
1184 echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1185 AC_LANG_CPLUSPLUS
1186 AC_TRY_RUN([
1187 #define SIGNED 1
1188 #define SILENT 1
1189 #include "${srcdir}/benchmarks/triang.cpp"
1190 ],
1191 triang_signed=0,
1192 triang_signed=$?,
1193 triang_signed=0
1194 )
1195 if test "$triang_signed" = "2"; then
1196 config_signed_triang_algo="intmath"
1197 echo "integer math"
1198 elif test "$triang_signed" = "3"; then
1199 config_signed_triang_algo="diharmonic"
1200 echo "di harmonics"
1201 elif test "$triang_signed" = "5"; then
1202 config_signed_triang_algo="intmathabs"
1203 echo "integer math using abs()"
1204 else
1205 echo "Benchmark of signed triangular wave algorithms failed!"
1206 echo "Maybe you are doing cross compilation? In that case you have to select"
1207 echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1208 echo "Call './configure --help' for further information or read configure.in."
1209 exit -1;
1210 fi
1211 else
1212 case "$config_signed_triang_algo" in
1213 intmath)
1214 triang_signed=2 ;;
1215 diharmonic)
1216 triang_signed=3 ;;
1217 intmathabs)
1218 triang_signed=5 ;;
1219 esac
1220 fi
1221 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1222
1223 if test "$config_unsigned_triang_algo" = "benchmark"; then
1224 echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1225 AC_LANG_CPLUSPLUS
1226 AC_TRY_RUN([
1227 #define SIGNED 0
1228 #define SILENT 1
1229 #include "${srcdir}/benchmarks/triang.cpp"
1230 ],
1231 triang_unsigned=0,
1232 triang_unsigned=$?,
1233 triang_unsigned=0
1234 )
1235 if test "$triang_unsigned" = "2"; then
1236 config_unsigned_triang_algo="intmath"
1237 echo "integer math"
1238 elif test "$triang_unsigned" = "3"; then
1239 config_unsigned_triang_algo="diharmonic"
1240 echo "di harmonics"
1241 elif test "$triang_unsigned" = "5"; then
1242 config_unsigned_triang_algo="intmathabs"
1243 echo "integer math using abs()"
1244 else
1245 echo "Benchmark of unsigned triangular wave algorithms failed!"
1246 echo "Maybe you are doing cross compilation? In that case you have to select"
1247 echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1248 echo "Call './configure --help' for further information or read configure.in."
1249 exit -1;
1250 fi
1251 else
1252 case "$config_unsigned_triang_algo" in
1253 intmath)
1254 triang_unsigned=2 ;;
1255 diharmonic)
1256 triang_unsigned=3 ;;
1257 intmathabs)
1258 triang_unsigned=5 ;;
1259 esac
1260 fi
1261 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1262
1263 AC_LANG_RESTORE
1264
1265
1266 ###########################################################################
1267 # Create Build Files
1268
1269 AM_CONFIG_HEADER(config.h)
1270 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1271
1272 AC_LANG_CPLUSPLUS
1273
1274 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1275 # this, the dlfcn.h check in am_prog_libtool may fail.
1276 AC_CHECK_HEADER(stdlib.h)
1277
1278 AC_OUTPUT( \
1279 Makefile \
1280 man/Makefile \
1281 man/linuxsampler.1 \
1282 src/Makefile \
1283 src/db/Makefile \
1284 src/network/Makefile \
1285 src/engines/Makefile \
1286 src/engines/gig/Makefile \
1287 src/engines/sf2/Makefile \
1288 src/engines/sfz/Makefile \
1289 src/engines/common/Makefile \
1290 src/effects/Makefile \
1291 src/common/Makefile \
1292 src/testcases/Makefile \
1293 src/drivers/Makefile \
1294 src/drivers/audio/Makefile \
1295 src/drivers/midi/Makefile \
1296 src/plugins/Makefile \
1297 src/hostplugins/Makefile \
1298 src/hostplugins/dssi/Makefile \
1299 src/hostplugins/lv2/Makefile \
1300 src/hostplugins/vst/Makefile \
1301 src/hostplugins/au/Makefile \
1302 linuxsampler.spec \
1303 debian/Makefile \
1304 Artwork/Makefile \
1305 scripts/Makefile \
1306 osx/Makefile \
1307 osx/linuxsampler.xcodeproj/Makefile \
1308 Documentation/Makefile \
1309 Documentation/Engines/Makefile \
1310 Documentation/Engines/gig/Makefile \
1311 linuxsampler.pc \
1312 Doxyfile \
1313 )
1314
1315 # resolve all nested variables in '${config_plugin_dir}'
1316 # (merely for providing a human readable summary below)
1317 while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1318 config_plugin_dir=`eval echo ${config_plugin_dir}`
1319 done
1320
1321
1322 ###########################################################################
1323 # Output All Configuration Options
1324
1325 echo ""
1326 echo "#####################################################################"
1327 echo "# LinuxSampler Configuration #"
1328 echo "#-------------------------------------------------------------------#"
1329 echo "# Release Version: ${LINUXSAMPLER_RELEASE_MAJOR}.${LINUXSAMPLER_RELEASE_MINOR}.${LINUXSAMPLER_RELEASE_BUILD}"
1330 echo "# LSCP Version: ${LSCP_RELEASE_MAJOR}.${LSCP_RELEASE_MINOR}"
1331 echo "#-------------------------------------------------------------------"
1332 echo "# Assembly Optimizations: ${config_asm}"
1333 echo "# Development Mode: ${config_dev_mode}"
1334 echo "# Debug Level: ${config_debug_level}"
1335 echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1336 echo "# Preload Samples: ${config_preload_samples}"
1337 echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1338 echo "# Maximum Events: ${config_max_events}"
1339 echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1340 echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1341 echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1342 echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1343 echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1344 echo "# Stream Size: ${config_stream_size}"
1345 echo "# Default Maximum Disk Streams: ${config_max_streams}"
1346 echo "# Default Maximum Voices: ${config_max_voices}"
1347 echo "# Default Subfragment Size: ${config_subfragment_size}"
1348 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1349 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1350 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1351 echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1352 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1353 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1354 echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1355 echo "# Default Portamento Time: ${config_portamento_time_default} s"
1356 echo "# Force Filter Usage: ${config_force_filter}"
1357 echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1358 echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1359 echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1360 echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1361 echo "# Override Filter Type: ${config_override_filter_type}"
1362 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1363 echo "# Process Muted Channels: ${config_process_muted_channels}"
1364 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1365 echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
1366 echo "# Interpolate Volume: ${config_interpolate_volume}"
1367 echo "# Instruments database support: ${config_instruments_db}"
1368 if test "$config_instruments_db" = "yes"; then
1369 echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1370 fi
1371 echo "# Plugin Path: ${config_plugin_dir}"
1372 echo "#-------------------------------------------------------------------"
1373 echo "# MIDI Input Drivers:"
1374 echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack_midi}, CoreMIDI: ${config_have_coremidi}, MME: ${config_have_mme}, MidiShare: ${config_have_midishare}"
1375 echo "#-------------------------------------------------------------------"
1376 echo "# Audio Output Drivers:"
1377 echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack}, ARTS: ${config_have_arts}, CoreAudio: ${config_have_coreaudio}, ASIO: ${config_have_asio}"
1378 echo "#-------------------------------------------------------------------"
1379 echo "# Sampler Engines:"
1380 echo "# GIG: yes, SF2: ${config_have_sf2}, SFZ: yes"
1381 echo "#-------------------------------------------------------------------"
1382 echo "# Building sampler as plugin for following host standards:"
1383 echo "# DSSI: ${config_have_dssi}, LV2: ${config_have_lv2}, VST: ${config_have_vst}, AU: ${config_have_au}"
1384 echo "#-------------------------------------------------------------------#"
1385 echo "# Read './configure --help' or file 'configure.in' for details. #"
1386 echo "#####################################################################"
1387 echo ""
1388 echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1389 echo ""

  ViewVC Help
Powered by ViewVC