/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Contents of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 2121 - (show annotations) (download)
Tue Sep 14 17:09:08 2010 UTC (13 years, 6 months ago) by schoenebeck
Original Path: linuxsampler/trunk/configure.in
File size: 56499 byte(s)
* implemented Roland GS NRPN 1ArrH which allows to set volume per note
* implemented Roland GS NRPN 1CrrH which allows to set pan per note
* implemented Roland GS NRPN 1DrrH which allows to set reverb send per
  note (in this implementation of the sampler its simply hard routed to
  the 1st effect send of the sampler channel, no matter what the actual
  effect type is)
* implemented Roland GS NRPN 1ErrH which allows to set chorus send per
  note (in this implementation of the sampler its simply hard routed to
  the 2nd effect send of the sampler channel, no matter what the actual
  effect type is)
* bumped version to 1.0.0cvs4

1 AC_INIT(configure.in)
2
3 #------------------------------------------------------------------------------------
4 # LinuxSampler's / liblinuxsampler's "official" release version:
5
6 LINUXSAMPLER_RELEASE_MAJOR=1
7 LINUXSAMPLER_RELEASE_MINOR=0
8 LINUXSAMPLER_RELEASE_BUILD=0.cvs4
9
10 #------------------------------------------------------------------------------------
11 # The following is the libtool / shared library version. This doesn't have to
12 # do anything with the release version. It MUST conform to the following rules:
13 #
14 # 1. Start with version information of `0:0:0' for each libtool library.
15 # 2. Update the version information only immediately before a public release of
16 # your software. More frequent updates are unnecessary, and only guarantee
17 # that the current interface number gets larger faster.
18 # 3. If the library source code has changed at all since the last update, then
19 # increment revision (`c:r:a' becomes `c:r+1:a').
20 # 4. If any interfaces have been added, removed, or changed since the last update,
21 # increment current, and set revision to 0.
22 # 5. If any interfaces have been added since the last public release, then increment
23 # age.
24 # 6. If any interfaces have been removed since the last public release, then set age
25 # to 0.
26
27 LIBLINUXSAMPLER_LT_CURRENT=3
28 LIBLINUXSAMPLER_LT_REVISION=0
29 LIBLINUXSAMPLER_LT_AGE=0
30 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31
32 #------------------------------------------------------------------------------------
33 # the LSCP specification version this LinuSampler release complies with:
34
35 LSCP_RELEASE_MAJOR=1
36 LSCP_RELEASE_MINOR=5
37
38 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40
41 AC_PROG_CXX
42 AC_LIBTOOL_WIN32_DLL
43 AM_PROG_LIBTOOL
44
45 AC_SUBST(SHLIB_VERSION_ARG)
46 AC_SUBST(SHARED_VERSION_INFO)
47
48 AC_C_BIGENDIAN
49 AC_CANONICAL_HOST
50
51 PKG_PROG_PKG_CONFIG
52
53 ###########################################################################
54 # General Checks
55
56 AM_CONDITIONAL(CROSS_COMPILING, test $cross_compiling = yes)
57
58 AC_MSG_CHECKING([whether x86 architecture])
59 def_arch_x86=0
60 case $host_cpu in
61 "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
62 echo "yes"
63 def_arch_x86=1;;
64 *)
65 echo "no";;
66 esac
67 AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
68
69 # determine the right gcc switch for CPU specific optimizations
70 # (only if the user did not provide one)
71 CXX_CPU_SWITCH=
72 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
73 if test "$def_arch_x86" = 1 -a "$host_cpu" != "x86_64"; then
74 CXX_CPU_SWITCH="-march=$host_cpu"
75 elif test "$target_cpu" = "ppc"; then
76 CXX_CPU_SWITCH="-arch=$host_cpu"
77 fi
78 fi
79 AC_SUBST([CXX_CPU_SWITCH])
80
81 # check if we're on MS Windows
82 AC_CHECK_HEADERS(
83 mmsystem.h,
84 have_windows=1,
85 have_windows=0,
86 [#include <windef.h>]
87 )
88 AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
89
90 AC_MSG_CHECKING([whether UNIX98 compatible])
91 AC_LANG_SAVE
92 AC_LANG_C
93 AC_TRY_RUN([
94 #ifndef _GNU_SOURCE
95 #define _GNU_SOURCE 1
96 #endif
97 #include <features.h>
98 void main(void) {
99 #if _XOPEN_SOURCE >= 500
100 exit(0); /* UNIX98 compatible */
101 #else
102 exit(-1); /* not UNIX98 compatible */
103 #endif
104 }
105 ],
106 have_unix98="yes",
107 have_unix98="no",
108 have_unix98="no"
109 )
110 AC_LANG_RESTORE
111 AC_MSG_RESULT([$have_unix98])
112 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
113 if test "x$HAVE_UNIX98" = "x"; then
114 echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
115 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
116 echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
117 echo "have a UNIX98 compatible system."
118 exit -1;
119 fi
120 fi
121
122 # check for <features.h>
123 AC_CHECK_HEADERS(features.h)
124
125 # test for POSIX thread library
126 m4_ifdef([m4_include(m4/pthread.m4)],,
127 [sinclude([m4/pthread.m4])])
128 ACX_PTHREAD
129 LIBS="$PTHREAD_LIBS $LIBS"
130 CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
131 CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
132 CC="$PTHREAD_CC"
133
134 # check for a bug in NPTL-enabled glibc
135 # (see Gentoo bug report #194076)
136 AC_ARG_ENABLE(nptl-bug-check,
137 [ --disable-nptl-bug-check
138 Disable check for a bug in certain NPTL-enabled
139 glibc versions that caused crashs.],
140 [config_check_nptl_bug="$enableval"],
141 [config_check_nptl_bug="yes"]
142 )
143 if test "$config_check_nptl_bug" = "yes"; then
144 m4_ifdef([m4_include(m4/nptl_bug.m4)],,
145 [sinclude([m4/nptl_bug.m4])])
146 ACX_NPTL_GLIBC_BUG([
147 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
148 echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
149 echo "probably crash due to this. Please report us the system you are"
150 echo "using and/or file a bug report to the bug tracking system of"
151 echo "your distribution."
152 echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
153 echo "well, you can try to circumvent this problem for now by setting"
154 echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
155 echo "should cause this test to pass."
156 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
157 AC_MSG_ERROR([possibly NPTL glibc bug detected])
158 ])
159 else
160 echo "NPTL glibc bug check disabled"
161 fi
162
163 # FIXME: this is actually a dependency of libgig, not of LS directly, why
164 # isn't it hidden by libgig?
165 AC_CHECK_HEADERS(uuid/uuid.h)
166 AC_SEARCH_LIBS(uuid_generate, uuid)
167
168
169
170 ###########################################################################
171 # Checks for available audio and MIDI systems / drivers
172 # (we throw an error if there's not at least one system for audio output and MIDI input available)
173
174 have_midi_input_driver="false"
175 have_audio_output_driver="false"
176
177 # ALSA
178 AC_ARG_ENABLE(alsa-driver,
179 [ --disable-alsa-driver
180 Disable support for the Advanced Linux Sound
181 Architecture (ALSA).],
182 [config_alsa_driver="$enableval"],
183 [config_alsa_driver="yes"]
184 )
185 have_alsa=0
186 if test "$config_alsa_driver" = "yes"; then
187 AC_CHECK_HEADER(alsa/asoundlib.h,
188 AC_CHECK_LIB(asound, main,
189 have_alsa=1
190 ,
191 have_alsa=0
192 )
193 ,
194 have_alsa=0
195 )
196 if test "$have_alsa" = "1"; then
197 have_midi_input_driver="true"
198 have_audio_output_driver="true";
199 fi
200
201 echo -n "checking Alsa version... "
202 AC_LANG_SAVE
203 AC_LANG_C
204 AC_TRY_RUN([
205 #include <alsa/asoundlib.h>
206 void main(void) {
207 /* ensure backward compatibility */
208 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
209 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
210 #endif
211 exit(SND_LIB_MAJOR);
212 }
213 ],
214 alsa_major=0,
215 alsa_major=$?,
216 alsa_major=0
217 )
218 AC_TRY_RUN([
219 #include <alsa/asoundlib.h>
220 void main(void) {
221 /* ensure backward compatibility */
222 #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
223 #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
224 #endif
225 exit(SND_LIB_MINOR);
226 }
227 ],
228 alsa_minor=0,
229 alsa_minor=$?,
230 alsa_minor=0
231 )
232 AC_TRY_RUN([
233 #include <alsa/asoundlib.h>
234 void main(void) {
235 /* ensure backward compatibility */
236 #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
237 #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
238 #endif
239 exit(SND_LIB_SUBMINOR);
240 }
241 ],
242 alsa_subminor=0,
243 alsa_subminor=$?,
244 alsa_subminor=0
245 )
246 AC_LANG_RESTORE
247 echo "$alsa_major.$alsa_minor.$alsa_subminor";
248 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
249 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
250 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
251 else
252 echo "ALSA support disabled by configure script parameter"
253 fi
254 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
255 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
256 config_have_alsa="no"
257 if test $have_alsa = "1"; then
258 config_have_alsa="yes"
259 fi
260
261 # JACK
262 AC_ARG_ENABLE(jack-driver,
263 [ --disable-jack-driver
264 Disable support for the Jack Audio Connection Kit
265 (JACK).],
266 [config_jack_driver="$enableval"],
267 [config_jack_driver="yes"]
268 )
269 have_jack=0
270 if test "$config_jack_driver" = "yes"; then
271 PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
272 if test $have_jack = "1"; then
273 AC_SUBST(JACK_LIBS)
274 AC_SUBST(JACK_CFLAGS)
275 linuxsampler_save_LIBS=$LIBS
276 LIBS="$JACK_LIBS $LIBS"
277 AC_CHECK_FUNCS(jack_client_name_size jack_client_open)
278 LIBS=$linuxsampler_save_LIBS
279 have_audio_output_driver="true";
280 fi
281 else
282 echo "JACK support disabled by configure script parameter"
283 fi
284 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
285 AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
286 config_have_jack="no"
287 if test $have_jack = "1"; then
288 config_have_jack="yes"
289 fi
290
291 # JACK MIDI
292 have_jack_midi=0
293 if test $have_jack = "1"; then
294 linuxsampler_save_CFLAGS=$CFLAGS
295 linuxsampler_save_LIBS=$LIBS
296 CFLAGS="$JACK_CFLAGS $CFLAGS"
297 LIBS="$JACK_LIBS $LIBS"
298 AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
299 if test $have_jack_midi = "1"; then
300 AC_CHECK_FUNCS(jack_midi_get_event_count)
301 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
302 jack_midi_clear_buffer(0, 0);
303 ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
304 [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
305 have_midi_input_driver="true"
306 fi
307 CFLAGS=$linuxsampler_save_CFLAGS
308 LIBS=$linuxsampler_save_LIBS
309 fi
310 AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
311 AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
312 [Define to 1 if you have JACK with MIDI support installed.])
313 config_have_jack_midi="no"
314 if test $have_jack_midi = "1"; then
315 config_have_jack_midi="yes"
316 fi
317
318 # ARTS
319 AC_ARG_ENABLE(arts-driver,
320 [ --disable-arts-driver
321 Disable support for the Analogue Realtime System
322 (aRts).],
323 [config_arts_driver="$enableval"],
324 [config_arts_driver="yes"]
325 )
326 have_arts=0
327 if test "$config_arts_driver" = "yes"; then
328 m4_ifdef([m4_include(m4/arts.m4)],,
329 [sinclude([m4/arts.m4])])
330 AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
331 if test "$have_arts" = "1"; then
332 have_audio_output_driver="true"
333 fi
334 else
335 echo "ARTS support disabled by configure script parameter"
336 fi
337 AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
338 AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
339 config_have_arts="no"
340 if test $have_arts = "1"; then
341 config_have_arts="yes"
342 fi
343
344 # ASIO AUDIO (Win32)
345 AC_ARG_ENABLE(asiosdk-dir,
346 [ --enable-asiosdk-dir
347 Directory where the ASIO SDK is located, this automatically
348 enables the compilation of the ASIO audio output driver.],
349 [config_asiosdk_dir="${enableval}"],
350 [config_asiosdk_dir="."]
351 )
352 AC_SUBST(config_asiosdk_dir)
353
354 AC_ARG_ENABLE(asio-driver,
355 [ --disable-asio-driver
356 Disable support for the Windows ASIO driver.],
357 [config_asio_driver="$enableval"],
358 [config_asio_driver="yes"]
359 )
360 have_asio=0
361 ASIOSDK_BASEDIR=
362 if test "$config_asio_driver" = "yes"; then
363 asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
364 echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
365 if test -e $asiosdk_headerfile ; then
366 echo yes
367 have_asio=1
368 ASIOSDK_BASEDIR="$config_asiosdk_dir"
369 else
370 echo no
371 have_asio=0
372 fi
373 if test "$have_asio" = "1"; then
374 have_audio_output_driver="true"
375 fi
376 else
377 echo "Windows ASIO support disabled by configure script parameter"
378 fi
379 AC_SUBST(ASIOSDK_BASEDIR)
380 AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
381 AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
382 config_have_asio="no"
383 if test $have_asio = "1"; then
384 config_have_asio="yes"
385 fi
386
387 # MidiShare (Linux, OS X, Windows)
388 AC_ARG_ENABLE(midishare-driver,
389 [ --disable-midishare-driver
390 Disable support for the MidiShare system.],
391 [config_midishare_driver="$enableval"],
392 [config_midishare_driver="yes"]
393 )
394 have_midishare=0
395 if test "$config_midishare_driver" = "yes"; then
396 AC_CHECK_HEADER(MidiShare.h,
397 AC_CHECK_LIB(MidiShare, MidiCountEvs,
398 have_midishare=1,
399 have_midishare=0
400 )
401 ,
402 have_midishare=0
403 )
404 if test "$have_midishare" = "1"; then
405 have_midi_input_driver="true"
406 fi
407 else
408 echo "MidiShare support disabled by configure script parameter"
409 fi
410 AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
411 AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
412 config_have_midishare="no"
413 if test $have_midishare = "1"; then
414 config_have_midishare="yes"
415 fi
416
417 # CoreMIDI (OS X)
418 AC_ARG_ENABLE(coremidi-driver,
419 [ --disable-coremidi-driver
420 Disable support for the Apple CoreMIDI system.],
421 [config_coremidi_driver="$enableval"],
422 [config_coremidi_driver="yes"]
423 )
424 have_coremidi=0
425 if test "$config_coremidi_driver" = "yes"; then
426 AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
427 have_coremidi=1,
428 have_coremidi=0
429 )
430 if test "$have_coremidi" = "1"; then
431 have_midi_input_driver="true"
432 fi
433 else
434 echo "CoreMIDI support disabled by configure script parameter"
435 fi
436 AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
437 AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
438 config_have_coremidi="no"
439 if test $have_coremidi = "1"; then
440 config_have_coremidi="yes"
441 fi
442
443 # CoreAudio (OS X)
444 AC_ARG_ENABLE(coreaudio-driver,
445 [ --disable-coreaudio-driver
446 Disable support for the Apple CoreAudio system.],
447 [config_coreaudio_driver="$enableval"],
448 [config_coreaudio_driver="yes"]
449 )
450 have_coreaudio=0
451 if test "$config_coreaudio_driver" = "yes"; then
452 AC_CHECK_HEADER(CoreAudio/CoreAudio.h,
453 have_coreaudio=1,
454 have_coreaudio=0
455 )
456 if test "$have_coreaudio" = "1"; then
457 have_audio_output_driver="true"
458 fi
459 else
460 echo "CoreAudio support disabled by configure script parameter"
461 fi
462 AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1")
463 AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.])
464 config_have_coreaudio="no"
465 if test $have_coreaudio = "1"; then
466 config_have_coreaudio="yes"
467 fi
468
469 # MME MIDI (Win32)
470 AC_ARG_ENABLE(mmemidi-driver,
471 [ --disable-mmemidi-driver
472 Disable support for the Windows MME MIDI system.],
473 [config_mmemidi_driver="$enableval"],
474 [config_mmemidi_driver="yes"]
475 )
476 have_mmemidi=0
477 if test "$config_mmemidi_driver" = "yes"; then
478 AC_CHECK_HEADERS(mmsystem.h,
479 have_mmemidi=1,
480 have_mmemidi=0
481 )
482 if test "$have_mmemidi" = "1"; then
483 have_midi_input_driver="true"
484 fi
485 else
486 echo "MME MIDI support disabled by configure script parameter"
487 fi
488 AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
489 AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
490 config_have_mme="no"
491 if test $have_mmemidi = "1"; then
492 config_have_mme="yes"
493 fi
494
495 # DSSI
496 AC_CHECK_HEADERS(dssi.h,
497 config_have_dssi="yes",
498 config_have_dssi="no")
499 AM_CONDITIONAL(HAVE_DSSI, test $config_have_dssi = "yes")
500
501 # LV2
502 PKG_CHECK_MODULES(LV2, lv2core, config_have_lv2="yes", config_have_lv2="no")
503 if test $config_have_lv2 = "no"; then
504 AC_CHECK_HEADER(lv2.h, config_have_lv2="yes", config_have_lv2="no")
505 fi
506 AM_CONDITIONAL(HAVE_LV2, test $config_have_lv2 = "yes")
507
508 # VST
509 AC_ARG_ENABLE(vstsdk-dir,
510 [ --enable-vstsdk-dir
511 Directory where the VST SDK is located.
512 This automatically enables the compilation
513 of the VST plugin.],
514 [VSTSDK_DIR="${enableval}"],
515 [VSTSDK_DIR=]
516 )
517 AC_SUBST(VSTSDK_DIR)
518 AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
519 config_have_vst="no"
520 if test "x$VSTSDK_DIR" != "x"; then
521 config_have_vst="yes"
522 fi
523
524 # AU
525 AC_CHECK_HEADERS(AudioUnit/AudioUnit.h,
526 config_have_au="yes",
527 config_have_au="no")
528 AM_CONDITIONAL(HAVE_AU, test $config_have_au = "yes")
529 AM_CONDITIONAL(HAVE_AUFLAGS, test "$AUFLAGS" != "")
530
531
532 # have we found at least one MIDI input and one audio output driver ?
533 if test "$have_midi_input_driver" = "false"; then
534 echo "No supported MIDI input system found!"
535 echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
536 echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
537 echo "If you think you have one of those available on your system, make sure you"
538 echo "also have the respective development (header) files installed."
539 exit -1;
540 fi
541 if test "$have_audio_output_driver" = "false"; then
542 echo "No supported audio output system found!"
543 echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
544 echo "driver at the moment!"
545 exit -1;
546 fi
547
548
549
550 ###########################################################################
551 # Checks for various DLL libraries
552
553 # Check presence of libgig
554 libgig_version="3.3.0"
555 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
556 if test "$HAVE_GIG" = "false"; then
557 echo "Required libgig version not found!"
558 echo "You need to have libgig version ${libgig_version} installed!"
559 exit -1;
560 else
561 echo "yes, found libgig $libgig_version"
562 fi
563 AC_SUBST(GIG_CFLAGS)
564 AC_SUBST(GIG_LIBS)
565
566 # SF2 Engine (requires libgig)
567 AC_ARG_ENABLE(sf2-engine,
568 [ --disable-sf2-engine
569 Disable compilation of the SF2 engine.
570 You need to have libgig installed.],
571 [config_sf2_engine="$enableval"],
572 [config_sf2_engine="yes"]
573 )
574 HAVE_SF2=0;
575 if test "$config_sf2_engine" = "yes"; then
576 HAVE_SF2=1
577 else
578 echo "SF2 engine disabled by configure script parameter"
579 fi
580 AM_CONDITIONAL(HAVE_SF2, test $HAVE_SF2 = 1)
581 AC_DEFINE_UNQUOTED(HAVE_SF2,$HAVE_SF2,[Define to 1 if you want SF2 engine and have libsf2 installed.])
582 config_have_sf2="no"
583 if test $HAVE_SF2 = "1"; then
584 config_have_sf2="yes"
585 fi
586
587 # Check presence of libsndfile
588 libsndfile_version="1.0"
589 PKG_CHECK_MODULES(SNDFILE, sndfile >= $libsndfile_version, HAVE_SNDFILE=true, HAVE_SNDFILE=false)
590 if test "$HAVE_SNDFILE" = "false"; then
591 echo "Required libsndfile version not found!"
592 echo "You need to have libsndfile version ${libsndfile_version} installed!"
593 exit -1;
594 else
595 echo "yes, found libsndfile $libsndfile_version"
596 fi
597 AC_SUBST(SNDFILE_CFLAGS)
598 AC_SUBST(SNDFILE_LIBS)
599
600 # Check for Vorbis support in libsndfile
601 linuxsampler_save_CFLAGS=$CFLAGS
602 CFLAGS="$SNDFILE_CFLAGS $CFLAGS"
603 AC_CHECK_DECLS([SF_FORMAT_VORBIS], [], [] ,[[#include <sndfile.h>]])
604 CFLAGS=$linuxsampler_save_CFLAGS
605
606 # Instruments DB feature (requires SQLite 3.3)
607 AC_ARG_ENABLE(instruments-db,
608 [ --disable-instruments-db
609 Disable compilation of the sampler's instruments
610 database feature. You need to have SQLite 3.3
611 or younger installed for this feature.],
612 [config_instruments_db="$enableval"],
613 [config_instruments_db="yes"]
614 )
615 HAVE_SQLITE3=0;
616 if test "$config_instruments_db" = "yes"; then
617 # Check presence of sqlite3
618 sqlite_version="3.3"
619 PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
620 AC_SUBST(SQLITE3_LIBS)
621 AC_SUBST(SQLITE3_CFLAGS)
622 if test $HAVE_SQLITE3 = false; then
623 HAVE_SQLITE3=0
624 config_instruments_db="no"
625 echo "*** Required sqlite version not found!"
626 echo "*** You need to have sqlite version ${sqlite_version} or higher"
627 echo "*** for instruments database support to be enabled."
628 echo "*** Support for instruments DB will be disabled!"
629 else
630 HAVE_SQLITE3=1
631 fi
632 else
633 echo "Instruments DB feature disabled by configure script parameter"
634 fi
635 AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
636 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
637
638
639
640 ###########################################################################
641 # Handle Configuration Options
642
643 # TODO: should we use AC_ARG_VAR(variable, description) instead?
644
645 AC_ARG_ENABLE(asm,
646 [ --disable-asm
647 Enable hand-crafted assembly optimizations
648 (default=on). LinuxSampler provides CPU specific
649 assembly optimizations. This is currently limited
650 to just enter a fast (denormal) FPU mode on x86
651 platforms. There are currently no synthesis core
652 assembly optimizations anymore since LS 0.4.0],
653 [config_asm="$enableval"],
654 [config_asm="yes"]
655 )
656 if test "$config_asm" = "yes"; then
657 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
658 fi
659
660 AC_ARG_ENABLE(dev-mode,
661 [ --enable-dev-mode
662 Enable development mode (default=off). In that mode
663 we do some extra sanity checks here and there.
664 This helps to spot possible problems, but reduces
665 efficiency a bit],
666 [config_dev_mode="$enableval"],
667 [config_dev_mode="no"]
668 )
669 if test "$config_dev_mode" = "yes"; then
670 AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
671 fi
672
673 AC_ARG_ENABLE(debug-level,
674 [ --enable-debug-level
675 Specify verbosity of console messages (default=1).
676 The higher the value, the higher will be verbosity.
677 A value of 0 means no console output at all.
678 There's not really an upper limit but the usual
679 level of all messages is currently somewhere less
680 than 10.],
681 [config_debug_level="${enableval}"],
682 [config_debug_level="1"]
683 )
684 AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
685
686 AC_ARG_ENABLE(rt-exceptions,
687 [ --enable-rt-exceptions
688 Enable exceptions in the realtime thread
689 (default=no). If this is enabled, exceptions will
690 be thrown on critical errors in the realtime
691 context as well. Otherwise if disabled
692 segmentation faults will be forced by the
693 application on critical errors.],
694 [config_rt_exceptions="$enableval"],
695 [config_rt_exceptions="no"]
696 )
697 if test "$config_rt_exceptions" = "yes"; then
698 AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
699 fi
700
701 AC_ARG_ENABLE(pthread-testcancel,
702 [ --enable-pthread-testcancel
703 Enable pthread_testcancel() calls and avoid asynchronous
704 cancel of pthreads (default=no).],
705 [config_pthread_testcancel="$enableval"],
706 [config_pthread_testcancel="no"]
707 )
708 if test "$config_pthread_testcancel" = "yes"; then
709 AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
710 fi
711
712 AC_ARG_ENABLE(preload-samples,
713 [ --enable-preload-samples
714 Due to seeking and latency issues with hard drives
715 we have to cache a small part of samples' head in
716 RAM (default=32768). The higher this value the
717 more memory will be occupied for each sample, but
718 the safer this will be in regards of possible
719 droputs. A 'good' value depends on the running
720 system and usage dependant factors.],
721 [config_preload_samples="${enableval}"],
722 [config_preload_samples="32768"]
723 )
724 AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
725
726 AC_ARG_ENABLE(max-pitch,
727 [ --enable-max-pitch
728 Specify the maximum allowed pitch value in octaves
729 (default=4). To lower memory usage you might want
730 set a smaller value.],
731 [config_max_pitch="${enableval}"],
732 [config_max_pitch="4"]
733 )
734 AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
735
736 AC_ARG_ENABLE(max-events,
737 [ --enable-max-events
738 Specify the maximum allowed amount of events to be
739 processed per fragment (default=1024).],
740 [config_max_events="${enableval}"],
741 [config_max_events="1024"]
742 )
743 AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
744
745 AC_ARG_ENABLE(eg-bottom,
746 [ --enable-eg-bottom
747 Bottom limit of envelope generators
748 (default=0.001). Certain kinds of curve types like
749 exponential curves converge against 0 but never
750 reach 0. So we have to define a certain low value
751 after which we should consider all smaller values
752 to be 'almost zero'. The smaller this value, the
753 longer will voices survive in EG's release stage
754 and thus waste voices. If this value is too high
755 will cause click sounds though.],
756 [config_eg_bottom="${enableval}"],
757 [config_eg_bottom="0.001"]
758 )
759 AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
760
761 AC_ARG_ENABLE(eg-min-release-time,
762 [ --enable-eg-min-release-time
763 Specify the lowest allowed release time in seconds
764 (default=0.0025). This value will also be used to
765 ramp down voices on voice stealing. This value
766 should always be less than the period time of the
767 used audio driver, as in case of voice stealing
768 the killed voice needs to be completely ramped
769 down in the same fragment.],
770 [config_eg_min_release_time="${enableval}"],
771 [config_eg_min_release_time="0.0025"]
772 )
773 AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
774
775 AC_ARG_ENABLE(refill-streams,
776 [ --enable-refill-streams
777 Number of streams that should be refilled in each
778 disk thread cycle (default=4).],
779 [config_refill_streams="${enableval}"],
780 [config_refill_streams="4"]
781 )
782 AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
783
784 AC_ARG_ENABLE(stream-min-refill,
785 [ --enable-stream-min-refill
786 Minimum refill size for disk streams (default=1024).
787 The disk thread will go to sleep for a while if no
788 stream had to be refilled more than this value in
789 a disk thread cycle.],
790 [config_stream_min_refill="${enableval}"],
791 [config_stream_min_refill="1024"]
792 )
793 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
794
795 AC_ARG_ENABLE(stream-max-refill,
796 [ --enable-stream-max-refill
797 Maximum refill size for disk streams
798 (default=65536). The disk thread will refill
799 each stream only by a size of this value per
800 disk thread cycle.],
801 [config_stream_max_refill="${enableval}"],
802 [config_stream_max_refill="65536"]
803 )
804 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
805
806 AC_ARG_ENABLE(stream-size,
807 [ --enable-stream-size
808 Size of each stream's ring buffer in sample points
809 (default=262144).],
810 [config_stream_size="${enableval}"],
811 [config_stream_size="262144"]
812 )
813 AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
814
815 AC_ARG_ENABLE(max-streams,
816 [ --enable-max-streams
817 Initial maximum amount of disk streams
818 (default=90). This value can be changed at
819 runtime. It should always be higher than the
820 maximum amount of voices.],
821 [config_max_streams="${enableval}"],
822 [config_max_streams="90"]
823 )
824 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
825
826 AC_ARG_ENABLE(max-voices,
827 [ --enable-max-voices
828 Initial maximum amount of voices (default=64).
829 This value can be changed at runtime. It should
830 always be lower than the maximum amount of disk
831 streams.],
832 [config_max_voices="${enableval}"],
833 [config_max_voices="64"]
834 )
835 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
836
837 AC_ARG_ENABLE(subfragment-size,
838 [ --enable-subfragment-size
839 Every audio fragment will be splitted into
840 subfragments. Where each subfragment renders
841 audio with constant synthesis parameters. This is
842 done for efficiency reasons. This parameter
843 defines the default size of a subfragment in
844 sample points. A large value means less CPU time
845 whereas a low value means better audio quality
846 (default=32).],
847 [config_subfragment_size="${enableval}"],
848 [config_subfragment_size="32"]
849 )
850 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
851
852 AC_ARG_ENABLE(global-attenuation-default,
853 [ --enable-global-attenuation-default
854 To prevent clipping all samples will be lowered
855 in amplitude by this given default factor (can
856 be overridden at runtime).
857 (default=0.35)],
858 [config_global_attenuation_default="${enableval}"],
859 [config_global_attenuation_default="0.35"]
860 )
861 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
862
863 AC_ARG_ENABLE(voice-steal-algo,
864 [ --enable-voice-steal-algo
865 Voice stealing algorithm to be used. Currently
866 available options:
867 none:
868 Disable voice stealing completely.
869 oldestvoiceonkey (default):
870 Try to kill a voice on the same key first,
871 if no success, proceed with the oldest key.
872 oldestkey:
873 Try to kill a voice from the oldest active
874 key.],
875 [ if test ! "(" "${enableval}" = "none" \
876 -o "${enableval}" = "oldestvoiceonkey" \
877 -o "${enableval}" = "oldestkey" ")" ; then
878 AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
879 else
880 config_voice_steal_algo="${enableval}"
881 fi
882 ],
883 [config_voice_steal_algo="oldestvoiceonkey"]
884 )
885 AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
886
887 AC_ARG_ENABLE(sysex-buffer-size,
888 [ --enable-sysex-buffer-size
889 System Exclusive Message buffer size in kB
890 (default=2048).],
891 [config_sysex_buffer_size="${enableval}"],
892 [config_sysex_buffer_size="2048"]
893 )
894 AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
895
896 AC_ARG_ENABLE(force-filter,
897 [ --enable-force-filter
898 If enabled will force filter to be used even if
899 no usage was define in instrument patch files.
900 (default=no).],
901 [config_force_filter="$enableval"],
902 [config_force_filter="no"]
903 )
904 if test "$config_force_filter" = "yes"; then
905 AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
906 fi
907
908 AC_ARG_ENABLE(filter-cutoff-min,
909 [ --enable-filter-cutoff-min
910 Minimum filter cutoff frequency in Hz
911 (default=100.0).],
912 [config_filter_cutoff_min="${enableval}"],
913 [config_filter_cutoff_min="100.0"]
914 )
915 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
916
917 AC_ARG_ENABLE(filter-cutoff-max,
918 [ --enable-filter-cutoff-max
919 Maximum filter cutoff frequency in Hz
920 (default=10000.0).],
921 [config_filter_cutoff_max="${enableval}"],
922 [config_filter_cutoff_max="10000.0"]
923 )
924 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
925
926 AC_ARG_ENABLE(override-cutoff-ctrl,
927 [ --enable-override-cutoff-ctrl
928 Override filter cutoff MIDI controller (default=no).
929 Note: you have to define the MIDI controller number
930 here, it's not a boolean parameter type! If this
931 option is used, controller number given by
932 instrument patch will be ignored and instead this
933 supplied value will be used.],
934 [config_override_cutoff_ctrl="${enableval}"],
935 [config_override_cutoff_ctrl="no"]
936 )
937 if test ! "$config_override_cutoff_ctrl" = "no"; then
938 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
939 fi
940
941 AC_ARG_ENABLE(override-resonance-ctrl,
942 [ --enable-override-resonance-ctrl
943 Override filter resonance MIDI controller
944 (default=no). Note: you have to define the MIDI
945 controller number here, it's not a boolean
946 parameter type! If this option is used, controller
947 number given by instrument patch will be ignored
948 and instead this supplied value will be used.],
949 [config_override_resonance_ctrl="${enableval}"],
950 [config_override_resonance_ctrl="no"]
951 )
952 if test ! "$config_override_resonance_ctrl" = "no"; then
953 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
954 fi
955
956 AC_ARG_ENABLE(override-filter-type,
957 [ --enable-override-filter-type
958 Override filter type (default=no). Options:
959 hp: for highpass
960 bp: for bandpass
961 br: for bandreject
962 lp: for lowpass
963 lpt: for lowpass turbo],
964 [ if test "${enableval}" = "hp" ; then
965 config_override_filter_type="::gig::vcf_type_highpass"
966 elif test "${enableval}" = "bp" ; then
967 config_override_filter_type="::gig::vcf_type_bandpass"
968 elif test "${enableval}" = "br" ; then
969 config_override_filter_type="::gig::vcf_type_bandreject"
970 elif test "${enableval}" = "lp" ; then
971 config_override_filter_type="::gig::vcf_type_lowpass"
972 elif test "${enableval}" = "lpt" ; then
973 config_override_filter_type="::gig::vcf_type_lowpassturbo"
974 elif test ! "${enableval}" = "no"; then
975 AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
976 fi
977 ],
978 [config_override_filter_type="no"]
979 )
980 if test ! "$config_override_filter_type" = "no"; then
981 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
982 fi
983
984 AC_ARG_ENABLE(gs-checksum,
985 [ --enable-gs-checksum
986 Enable Roland General Synth SysEx checksum check
987 (default=no). If this is enabled, all GS SysEx
988 messages which do not provide a correct checksum
989 will be ignored. This is disabled by default as
990 not all devices honor GS checksums.],
991 [config_assert_gs_sysex_checksum="$enableval"],
992 [config_assert_gs_sysex_checksum="no"]
993 )
994 if test "config_assert_gs_sysex_checksum" = "yes"; then
995 AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
996 fi
997
998 AC_ARG_ENABLE(portamento-time-min,
999 [ --enable-portamento-time-min
1000 Minimum Portamento time in seconds
1001 (default=0.1).],
1002 [config_portamento_time_min="${enableval}"],
1003 [config_portamento_time_min="0.1"]
1004 )
1005 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
1006
1007 AC_ARG_ENABLE(portamento-time-max,
1008 [ --enable-portamento-time-max
1009 Maximum Portamento time in seconds
1010 (default=32).],
1011 [config_portamento_time_max="${enableval}"],
1012 [config_portamento_time_max="32"]
1013 )
1014 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
1015
1016 AC_ARG_ENABLE(portamento-time-default,
1017 [ --enable-portamento-time-default
1018 Default Portamento time in seconds
1019 (default=1).],
1020 [config_portamento_time_default="${enableval}"],
1021 [config_portamento_time_default="1"]
1022 )
1023 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
1024
1025 AC_ARG_ENABLE(signed-triang-algo,
1026 [ --enable-signed-triang-algo
1027 Signed triangular wave algorithm to be used (e.g. for LFOs).
1028 Currently available options:
1029 intmath:
1030 Uses integer math without any branch will then be
1031 converted to floating point value for each sample point.
1032 This int->float conversion might hurt on some systems.
1033 intmathabs:
1034 Similar to intmath but uses abs() function.
1035 Depending on compiler and platrofm this could
1036 perform better than integer math as it avoids
1037 an extra integer multiply instruction.
1038 diharmonic:
1039 The triangular wave will be approximated by adding two
1040 sinusoidials. This solution might especially hurt on
1041 systems with weak floating point unit.
1042 benchmark (default):
1043 This is not an algorithm. Use this option if the
1044 appropriate algorithm should be automatically
1045 chosen by the configure script by performing a
1046 benchmark between the algorithms mentioned above.
1047 This will NOT work for cross compilation!],
1048 [ if test ! "(" "${enableval}" = "intmath" \
1049 -o "${enableval}" = "intmathabs" \
1050 -o "${enableval}" = "diharmonic" ")" ; then
1051 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
1052 else
1053 config_signed_triang_algo="${enableval}"
1054 fi
1055 ],
1056 [config_signed_triang_algo="benchmark"]
1057 )
1058
1059 AC_ARG_ENABLE(unsigned-triang-algo,
1060 [ --enable-unsigned-triang-algo
1061 Unsigned triangular wave algorithm to be used (e.g. for LFOs).
1062 Currently available options:
1063 intmath:
1064 Uses integer math without any branch will then be
1065 converted to floating point value for each sample point.
1066 This int->float conversion might hurt on some systems.
1067 intmathabs:
1068 Similar to intmath but uses abs() function.
1069 Depending on compiler and platrofm this could
1070 perform better than integer math as it avoids
1071 an extra integer multiply instruction.
1072 diharmonic:
1073 The triangular wave will be approximated by adding two
1074 sinusoidials. This solution might especially hurt on
1075 systems with weak floating point unit.
1076 benchmark (default):
1077 This is not an algorithm. Use this option if the
1078 appropriate algorithm should be automatically
1079 chosen by the configure script by performing a
1080 benchmark between the algorithms mentioned above.
1081 This will NOT work for cross compilation!],
1082 [ if test ! "(" "${enableval}" = "intmath" \
1083 -o "${enableval}" = "intmathabs" \
1084 -o "${enableval}" = "diharmonic" ")" ; then
1085 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
1086 else
1087 config_unsigned_triang_algo="${enableval}"
1088 fi
1089 ],
1090 [config_unsigned_triang_algo="benchmark"]
1091 )
1092
1093 AC_ARG_ENABLE(process-muted-channels,
1094 [ --enable-process-muted-channels
1095 Enable processing of muted channels (default=no).
1096 In that mode all MIDI events in the muted channels
1097 will be processed. This will provide information
1098 about the active voices in the muted channels and
1099 will not discard notes, triggered in mute mode,
1100 when the channel is unmuted. But also will reduce
1101 the efficiency.],
1102 [config_process_muted_channels="$enableval"],
1103 [config_process_muted_channels="no"]
1104 )
1105 if test "$config_process_muted_channels" = "yes"; then
1106 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
1107 fi
1108
1109 AC_ARG_ENABLE(process-all-notes-off,
1110 [ --disable-process-all-notes-off
1111 Disable interpretation of All-Notes-Off MIDI
1112 messages (default=on). By default LS will release
1113 all voices whenever it receives an All-Notes-Off
1114 MIDI message. You can disable this behavior, so
1115 that LS simply ignores such messages.],
1116 [config_process_all_notes_off="$enableval"],
1117 [config_process_all_notes_off="yes"]
1118 )
1119 if test "$config_process_all_notes_off" = "yes"; then
1120 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
1121 fi
1122
1123 AC_ARG_ENABLE(interpolate-volume,
1124 [ --disable-interpolate-volume
1125 Disable interpolation of volume modulation
1126 (default=on). With this enabled, the volume changes
1127 generated by for example the envelope generator
1128 will be smoother, minimizing the risk for audio
1129 clicks. Disable it to reduce CPU usage.],
1130 [config_interpolate_volume="$enableval"],
1131 [config_interpolate_volume="yes"]
1132 )
1133 if test "$config_interpolate_volume" = "yes"; then
1134 AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
1135 fi
1136
1137 AC_ARG_ENABLE(master-volume-sysex-by-port,
1138 [ --enable-master-volume-sysex-by-port
1139 Whether global volume sysex message should be
1140 applied globally to the whole sampler or only to
1141 the sampler channels connected to the same MIDI
1142 input port on which the sysex message arrived on.
1143 By default global volume sysex messages apply
1144 globally to the whole sampler, since many MIDI
1145 devices behave that way.],
1146 [config_master_volume_sysex_by_port="$enableval"],
1147 [config_master_volume_sysex_by_port="no"]
1148 )
1149 if test "$config_master_volume_sysex_by_port" = "yes"; then
1150 AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
1151 fi
1152
1153 AC_ARG_ENABLE(plugin-dir,
1154 [ --enable-plugin-dir
1155 Directory where the sampler shall look for potential plugins,
1156 that is 3rd party shared libraries that should be loaded by
1157 the sampler on startup. By default the sampler will search
1158 for plugins in the subdirectory "plugins" below its own
1159 library directory.
1160 (i.e. /usr/local/lib/linuxsampler/plugins)],
1161 [config_plugin_dir="${enableval}"],
1162 [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1163 )
1164 AC_SUBST(config_plugin_dir)
1165
1166 AC_ARG_ENABLE(default-instruments-db-location,
1167 [ --enable-default-instruments-db-location
1168 Only when instruments DB feature is enabled: file name
1169 which shall be taken as default location of the
1170 instruments DB file. This location can still be
1171 overridden at runtime with a command line switch.
1172 (default: /var/lib/linuxsampler/instruments.db)],
1173 [config_default_instruments_db_file="${enableval}"],
1174 [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1175 )
1176 AC_DEFINE_UNQUOTED(
1177 CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1178 "$config_default_instruments_db_file",
1179 [Only when instruments DB feature is enabled: default location of the DB file.]
1180 )
1181 AC_SUBST(config_default_instruments_db_file)
1182
1183
1184 ###########################################################################
1185 # Automatic Benchmarks (to detect the best algorithms for the system)
1186
1187 AC_LANG_SAVE
1188
1189 if test "$config_signed_triang_algo" = "benchmark"; then
1190 echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1191 AC_LANG_CPLUSPLUS
1192 AC_TRY_RUN([
1193 #define SIGNED 1
1194 #define SILENT 1
1195 #include "${srcdir}/benchmarks/triang.cpp"
1196 ],
1197 triang_signed=0,
1198 triang_signed=$?,
1199 triang_signed=0
1200 )
1201 if test "$triang_signed" = "2"; then
1202 config_signed_triang_algo="intmath"
1203 echo "integer math"
1204 elif test "$triang_signed" = "3"; then
1205 config_signed_triang_algo="diharmonic"
1206 echo "di harmonics"
1207 elif test "$triang_signed" = "5"; then
1208 config_signed_triang_algo="intmathabs"
1209 echo "integer math using abs()"
1210 else
1211 echo "Benchmark of signed triangular wave algorithms failed!"
1212 echo "Maybe you are doing cross compilation? In that case you have to select"
1213 echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1214 echo "Call './configure --help' for further information or read configure.in."
1215 exit -1;
1216 fi
1217 else
1218 case "$config_signed_triang_algo" in
1219 intmath)
1220 triang_signed=2 ;;
1221 diharmonic)
1222 triang_signed=3 ;;
1223 intmathabs)
1224 triang_signed=5 ;;
1225 esac
1226 fi
1227 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1228
1229 if test "$config_unsigned_triang_algo" = "benchmark"; then
1230 echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1231 AC_LANG_CPLUSPLUS
1232 AC_TRY_RUN([
1233 #define SIGNED 0
1234 #define SILENT 1
1235 #include "${srcdir}/benchmarks/triang.cpp"
1236 ],
1237 triang_unsigned=0,
1238 triang_unsigned=$?,
1239 triang_unsigned=0
1240 )
1241 if test "$triang_unsigned" = "2"; then
1242 config_unsigned_triang_algo="intmath"
1243 echo "integer math"
1244 elif test "$triang_unsigned" = "3"; then
1245 config_unsigned_triang_algo="diharmonic"
1246 echo "di harmonics"
1247 elif test "$triang_unsigned" = "5"; then
1248 config_unsigned_triang_algo="intmathabs"
1249 echo "integer math using abs()"
1250 else
1251 echo "Benchmark of unsigned triangular wave algorithms failed!"
1252 echo "Maybe you are doing cross compilation? In that case you have to select"
1253 echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1254 echo "Call './configure --help' for further information or read configure.in."
1255 exit -1;
1256 fi
1257 else
1258 case "$config_unsigned_triang_algo" in
1259 intmath)
1260 triang_unsigned=2 ;;
1261 diharmonic)
1262 triang_unsigned=3 ;;
1263 intmathabs)
1264 triang_unsigned=5 ;;
1265 esac
1266 fi
1267 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1268
1269 AC_LANG_RESTORE
1270
1271
1272 ###########################################################################
1273 # Create Build Files
1274
1275 AM_CONFIG_HEADER(config.h)
1276 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1277
1278 AC_LANG_CPLUSPLUS
1279
1280 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1281 # this, the dlfcn.h check in am_prog_libtool may fail.
1282 AC_CHECK_HEADER(stdlib.h)
1283
1284 AC_OUTPUT( \
1285 Makefile \
1286 man/Makefile \
1287 man/linuxsampler.1 \
1288 src/Makefile \
1289 src/db/Makefile \
1290 src/network/Makefile \
1291 src/engines/Makefile \
1292 src/engines/gig/Makefile \
1293 src/engines/sf2/Makefile \
1294 src/engines/sfz/Makefile \
1295 src/engines/common/Makefile \
1296 src/effects/Makefile \
1297 src/common/Makefile \
1298 src/testcases/Makefile \
1299 src/drivers/Makefile \
1300 src/drivers/audio/Makefile \
1301 src/drivers/midi/Makefile \
1302 src/plugins/Makefile \
1303 src/hostplugins/Makefile \
1304 src/hostplugins/dssi/Makefile \
1305 src/hostplugins/lv2/Makefile \
1306 src/hostplugins/vst/Makefile \
1307 src/hostplugins/au/Makefile \
1308 linuxsampler.spec \
1309 debian/Makefile \
1310 Artwork/Makefile \
1311 scripts/Makefile \
1312 osx/Makefile \
1313 osx/linuxsampler.xcodeproj/Makefile \
1314 Documentation/Makefile \
1315 Documentation/Engines/Makefile \
1316 Documentation/Engines/gig/Makefile \
1317 linuxsampler.pc \
1318 Doxyfile \
1319 )
1320
1321 # resolve all nested variables in '${config_plugin_dir}'
1322 # (merely for providing a human readable summary below)
1323 while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1324 config_plugin_dir=`eval echo ${config_plugin_dir}`
1325 done
1326
1327
1328 ###########################################################################
1329 # Output All Configuration Options
1330
1331 echo ""
1332 echo "#####################################################################"
1333 echo "# LinuxSampler Configuration #"
1334 echo "#-------------------------------------------------------------------#"
1335 echo "# Release Version: ${LINUXSAMPLER_RELEASE_MAJOR}.${LINUXSAMPLER_RELEASE_MINOR}.${LINUXSAMPLER_RELEASE_BUILD}"
1336 echo "# LSCP Version: ${LSCP_RELEASE_MAJOR}.${LSCP_RELEASE_MINOR}"
1337 echo "#-------------------------------------------------------------------"
1338 echo "# Assembly Optimizations: ${config_asm}"
1339 echo "# Development Mode: ${config_dev_mode}"
1340 echo "# Debug Level: ${config_debug_level}"
1341 echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1342 echo "# Preload Samples: ${config_preload_samples}"
1343 echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1344 echo "# Maximum Events: ${config_max_events}"
1345 echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1346 echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1347 echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1348 echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1349 echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1350 echo "# Stream Size: ${config_stream_size}"
1351 echo "# Default Maximum Disk Streams: ${config_max_streams}"
1352 echo "# Default Maximum Voices: ${config_max_voices}"
1353 echo "# Default Subfragment Size: ${config_subfragment_size}"
1354 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1355 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1356 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1357 echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1358 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1359 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1360 echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1361 echo "# Default Portamento Time: ${config_portamento_time_default} s"
1362 echo "# Force Filter Usage: ${config_force_filter}"
1363 echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1364 echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1365 echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1366 echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1367 echo "# Override Filter Type: ${config_override_filter_type}"
1368 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1369 echo "# Process Muted Channels: ${config_process_muted_channels}"
1370 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1371 echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
1372 echo "# Interpolate Volume: ${config_interpolate_volume}"
1373 echo "# Instruments database support: ${config_instruments_db}"
1374 if test "$config_instruments_db" = "yes"; then
1375 echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1376 fi
1377 echo "# Plugin Path: ${config_plugin_dir}"
1378 echo "#-------------------------------------------------------------------"
1379 echo "# MIDI Input Drivers:"
1380 echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack_midi}, CoreMIDI: ${config_have_coremidi}, MME: ${config_have_mme}, MidiShare: ${config_have_midishare}"
1381 echo "#-------------------------------------------------------------------"
1382 echo "# Audio Output Drivers:"
1383 echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack}, ARTS: ${config_have_arts}, CoreAudio: ${config_have_coreaudio}, ASIO: ${config_have_asio}"
1384 echo "#-------------------------------------------------------------------"
1385 echo "# Sampler Engines:"
1386 echo "# GIG: yes, SF2: ${config_have_sf2}, SFZ: yes"
1387 echo "#-------------------------------------------------------------------"
1388 echo "# Building sampler as plugin for following host standards:"
1389 echo "# DSSI: ${config_have_dssi}, LV2: ${config_have_lv2}, VST: ${config_have_vst}, AU: ${config_have_au}"
1390 echo "#-------------------------------------------------------------------#"
1391 echo "# Read './configure --help' or file 'configure.in' for details. #"
1392 echo "#####################################################################"
1393 echo ""
1394 echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1395 echo ""

  ViewVC Help
Powered by ViewVC