/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Contents of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 2167 - (show annotations) (download)
Mon Feb 21 17:34:36 2011 UTC (13 years ago) by persson
Original Path: linuxsampler/trunk/configure.in
File size: 56943 byte(s)
* sfz engine: use loop markers from sample file if loop_start and
  loop_end are not set in sfz file

1 AC_INIT(configure.in)
2
3 #------------------------------------------------------------------------------------
4 # LinuxSampler's / liblinuxsampler's "official" release version:
5
6 LINUXSAMPLER_RELEASE_MAJOR=1
7 LINUXSAMPLER_RELEASE_MINOR=0
8 LINUXSAMPLER_RELEASE_BUILD=0.cvs10
9
10 #------------------------------------------------------------------------------------
11 # The following is the libtool / shared library version. This doesn't have to
12 # do anything with the release version. It MUST conform to the following rules:
13 #
14 # 1. Start with version information of `0:0:0' for each libtool library.
15 # 2. Update the version information only immediately before a public release of
16 # your software. More frequent updates are unnecessary, and only guarantee
17 # that the current interface number gets larger faster.
18 # 3. If the library source code has changed at all since the last update, then
19 # increment revision (`c:r:a' becomes `c:r+1:a').
20 # 4. If any interfaces have been added, removed, or changed since the last update,
21 # increment current, and set revision to 0.
22 # 5. If any interfaces have been added since the last public release, then increment
23 # age.
24 # 6. If any interfaces have been removed since the last public release, then set age
25 # to 0.
26
27 LIBLINUXSAMPLER_LT_CURRENT=3
28 LIBLINUXSAMPLER_LT_REVISION=0
29 LIBLINUXSAMPLER_LT_AGE=0
30 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31
32 #------------------------------------------------------------------------------------
33 # the LSCP specification version this LinuSampler release complies with:
34
35 LSCP_RELEASE_MAJOR=1
36 LSCP_RELEASE_MINOR=5
37
38 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40
41 AC_PROG_CXX
42 AC_LIBTOOL_WIN32_DLL
43 AM_PROG_LIBTOOL
44
45 AC_SUBST(SHLIB_VERSION_ARG)
46 AC_SUBST(SHARED_VERSION_INFO)
47
48 AC_C_BIGENDIAN
49 AC_CANONICAL_HOST
50
51 PKG_PROG_PKG_CONFIG
52
53 ###########################################################################
54 # General Checks
55
56 AM_CONDITIONAL(CROSS_COMPILING, test $cross_compiling = yes)
57
58 AC_MSG_CHECKING([whether x86 architecture])
59 def_arch_x86=0
60 case $host_cpu in
61 "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
62 echo "yes"
63 def_arch_x86=1;;
64 *)
65 echo "no";;
66 esac
67 AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
68
69 # determine the right gcc switch for CPU specific optimizations
70 # (only if the user did not provide one)
71 CXX_CPU_SWITCH=
72 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
73 if test "$def_arch_x86" = 1 -a "$host_cpu" != "x86_64"; then
74 CXX_CPU_SWITCH="-march=$host_cpu"
75 elif test "$target_cpu" = "ppc"; then
76 CXX_CPU_SWITCH="-arch=$host_cpu"
77 fi
78 fi
79 AC_SUBST([CXX_CPU_SWITCH])
80
81 # check if we're on MS Windows
82 AC_CHECK_HEADERS(
83 mmsystem.h,
84 have_windows=1,
85 have_windows=0,
86 [#include <windef.h>]
87 )
88 AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
89
90 AC_MSG_CHECKING([whether UNIX98 compatible])
91 AC_LANG_SAVE
92 AC_LANG_C
93 AC_TRY_RUN([
94 #ifndef _GNU_SOURCE
95 #define _GNU_SOURCE 1
96 #endif
97 #include <features.h>
98 void main(void) {
99 #if _XOPEN_SOURCE >= 500
100 exit(0); /* UNIX98 compatible */
101 #else
102 exit(-1); /* not UNIX98 compatible */
103 #endif
104 }
105 ],
106 have_unix98="yes",
107 have_unix98="no",
108 have_unix98="no"
109 )
110 AC_LANG_RESTORE
111 AC_MSG_RESULT([$have_unix98])
112 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
113 if test "x$HAVE_UNIX98" = "x"; then
114 echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
115 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
116 echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
117 echo "have a UNIX98 compatible system."
118 exit -1;
119 fi
120 fi
121
122 # check for <features.h>
123 AC_CHECK_HEADERS(features.h)
124
125 # test for POSIX thread library
126 m4_ifdef([m4_include(m4/pthread.m4)],,
127 [sinclude([m4/pthread.m4])])
128 ACX_PTHREAD
129 LIBS="$PTHREAD_LIBS $LIBS"
130 CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
131 CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
132 CC="$PTHREAD_CC"
133
134 # check for a bug in NPTL-enabled glibc
135 # (see Gentoo bug report #194076)
136 AC_ARG_ENABLE(nptl-bug-check,
137 [ --disable-nptl-bug-check
138 Disable check for a bug in certain NPTL-enabled
139 glibc versions that caused crashs.],
140 [config_check_nptl_bug="$enableval"],
141 [config_check_nptl_bug="yes"]
142 )
143 if test "$config_check_nptl_bug" = "yes"; then
144 m4_ifdef([m4_include(m4/nptl_bug.m4)],,
145 [sinclude([m4/nptl_bug.m4])])
146 ACX_NPTL_GLIBC_BUG([
147 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
148 echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
149 echo "probably crash due to this. Please report us the system you are"
150 echo "using and/or file a bug report to the bug tracking system of"
151 echo "your distribution."
152 echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
153 echo "well, you can try to circumvent this problem for now by setting"
154 echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
155 echo "should cause this test to pass."
156 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
157 AC_MSG_ERROR([possibly NPTL glibc bug detected])
158 ])
159 else
160 echo "NPTL glibc bug check disabled"
161 fi
162
163 # FIXME: this is actually a dependency of libgig, not of LS directly, why
164 # isn't it hidden by libgig?
165 AC_CHECK_HEADERS(uuid/uuid.h)
166 AC_SEARCH_LIBS(uuid_generate, uuid)
167
168
169
170 ###########################################################################
171 # Checks for available audio and MIDI systems / drivers
172 # (we throw an error if there's not at least one system for audio output and MIDI input available)
173
174 have_midi_input_driver="false"
175 have_audio_output_driver="false"
176
177 # ALSA
178 AC_ARG_ENABLE(alsa-driver,
179 [ --disable-alsa-driver
180 Disable support for the Advanced Linux Sound
181 Architecture (ALSA).],
182 [config_alsa_driver="$enableval"],
183 [config_alsa_driver="yes"]
184 )
185 have_alsa=0
186 if test "$config_alsa_driver" = "yes"; then
187 AC_CHECK_HEADER(alsa/asoundlib.h,
188 AC_CHECK_LIB(asound, main,
189 have_alsa=1
190 ,
191 have_alsa=0
192 )
193 ,
194 have_alsa=0
195 )
196 if test "$have_alsa" = "1"; then
197 have_midi_input_driver="true"
198 have_audio_output_driver="true";
199 fi
200
201 echo -n "checking Alsa version... "
202 AC_LANG_SAVE
203 AC_LANG_C
204 AC_TRY_RUN([
205 #include <alsa/asoundlib.h>
206 void main(void) {
207 /* ensure backward compatibility */
208 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
209 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
210 #endif
211 exit(SND_LIB_MAJOR);
212 }
213 ],
214 alsa_major=0,
215 alsa_major=$?,
216 alsa_major=0
217 )
218 AC_TRY_RUN([
219 #include <alsa/asoundlib.h>
220 void main(void) {
221 /* ensure backward compatibility */
222 #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
223 #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
224 #endif
225 exit(SND_LIB_MINOR);
226 }
227 ],
228 alsa_minor=0,
229 alsa_minor=$?,
230 alsa_minor=0
231 )
232 AC_TRY_RUN([
233 #include <alsa/asoundlib.h>
234 void main(void) {
235 /* ensure backward compatibility */
236 #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
237 #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
238 #endif
239 exit(SND_LIB_SUBMINOR);
240 }
241 ],
242 alsa_subminor=0,
243 alsa_subminor=$?,
244 alsa_subminor=0
245 )
246 AC_LANG_RESTORE
247 echo "$alsa_major.$alsa_minor.$alsa_subminor";
248 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
249 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
250 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
251 else
252 echo "ALSA support disabled by configure script parameter"
253 fi
254 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
255 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
256 config_have_alsa="no"
257 if test $have_alsa = "1"; then
258 config_have_alsa="yes"
259 fi
260
261 # JACK
262 AC_ARG_ENABLE(jack-driver,
263 [ --disable-jack-driver
264 Disable support for the Jack Audio Connection Kit
265 (JACK).],
266 [config_jack_driver="$enableval"],
267 [config_jack_driver="yes"]
268 )
269 have_jack=0
270 if test "$config_jack_driver" = "yes"; then
271 PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
272 if test $have_jack = "1"; then
273 AC_SUBST(JACK_LIBS)
274 AC_SUBST(JACK_CFLAGS)
275 linuxsampler_save_LIBS=$LIBS
276 LIBS="$JACK_LIBS $LIBS"
277 AC_CHECK_FUNCS(jack_client_name_size jack_client_open)
278 LIBS=$linuxsampler_save_LIBS
279 have_audio_output_driver="true";
280 fi
281 else
282 echo "JACK support disabled by configure script parameter"
283 fi
284 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
285 AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
286 config_have_jack="no"
287 if test $have_jack = "1"; then
288 config_have_jack="yes"
289 fi
290
291 # JACK MIDI
292 have_jack_midi=0
293 if test $have_jack = "1"; then
294 linuxsampler_save_CFLAGS=$CFLAGS
295 linuxsampler_save_LIBS=$LIBS
296 CFLAGS="$JACK_CFLAGS $CFLAGS"
297 LIBS="$JACK_LIBS $LIBS"
298 AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
299 if test $have_jack_midi = "1"; then
300 AC_CHECK_FUNCS(jack_midi_get_event_count)
301 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
302 jack_midi_clear_buffer(0, 0);
303 ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
304 [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
305 have_midi_input_driver="true"
306 fi
307 CFLAGS=$linuxsampler_save_CFLAGS
308 LIBS=$linuxsampler_save_LIBS
309 fi
310 AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
311 AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
312 [Define to 1 if you have JACK with MIDI support installed.])
313 config_have_jack_midi="no"
314 if test $have_jack_midi = "1"; then
315 config_have_jack_midi="yes"
316 fi
317
318 # ARTS
319 AC_ARG_ENABLE(arts-driver,
320 [ --disable-arts-driver
321 Disable support for the Analogue Realtime System
322 (aRts).],
323 [config_arts_driver="$enableval"],
324 [config_arts_driver="yes"]
325 )
326 have_arts=0
327 if test "$config_arts_driver" = "yes"; then
328 m4_ifdef([m4_include(m4/arts.m4)],,
329 [sinclude([m4/arts.m4])])
330 AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
331 if test "$have_arts" = "1"; then
332 have_audio_output_driver="true"
333 fi
334 else
335 echo "ARTS support disabled by configure script parameter"
336 fi
337 AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
338 AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
339 config_have_arts="no"
340 if test $have_arts = "1"; then
341 config_have_arts="yes"
342 fi
343
344 # ASIO AUDIO (Win32)
345 AC_ARG_ENABLE(asiosdk-dir,
346 [ --enable-asiosdk-dir
347 Directory where the ASIO SDK is located, this automatically
348 enables the compilation of the ASIO audio output driver.],
349 [config_asiosdk_dir="${enableval}"],
350 [config_asiosdk_dir="."]
351 )
352 AC_SUBST(config_asiosdk_dir)
353
354 AC_ARG_ENABLE(asio-driver,
355 [ --disable-asio-driver
356 Disable support for the Windows ASIO driver.],
357 [config_asio_driver="$enableval"],
358 [config_asio_driver="yes"]
359 )
360 have_asio=0
361 ASIOSDK_BASEDIR=
362 if test "$config_asio_driver" = "yes"; then
363 asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
364 echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
365 if test -e $asiosdk_headerfile ; then
366 echo yes
367 have_asio=1
368 ASIOSDK_BASEDIR="$config_asiosdk_dir"
369 else
370 echo no
371 have_asio=0
372 fi
373 if test "$have_asio" = "1"; then
374 have_audio_output_driver="true"
375 fi
376 else
377 echo "Windows ASIO support disabled by configure script parameter"
378 fi
379 AC_SUBST(ASIOSDK_BASEDIR)
380 AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
381 AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
382 config_have_asio="no"
383 if test $have_asio = "1"; then
384 config_have_asio="yes"
385 fi
386
387 # MidiShare (Linux, OS X, Windows)
388 AC_ARG_ENABLE(midishare-driver,
389 [ --disable-midishare-driver
390 Disable support for the MidiShare system.],
391 [config_midishare_driver="$enableval"],
392 [config_midishare_driver="yes"]
393 )
394 have_midishare=0
395 if test "$config_midishare_driver" = "yes"; then
396 AC_CHECK_HEADER(MidiShare.h,
397 AC_CHECK_LIB(MidiShare, MidiCountEvs,
398 have_midishare=1,
399 have_midishare=0
400 )
401 ,
402 have_midishare=0
403 )
404 if test "$have_midishare" = "1"; then
405 have_midi_input_driver="true"
406 fi
407 else
408 echo "MidiShare support disabled by configure script parameter"
409 fi
410 AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
411 AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
412 config_have_midishare="no"
413 if test $have_midishare = "1"; then
414 config_have_midishare="yes"
415 fi
416
417 # CoreMIDI (OS X)
418 AC_ARG_ENABLE(coremidi-driver,
419 [ --disable-coremidi-driver
420 Disable support for the Apple CoreMIDI system.],
421 [config_coremidi_driver="$enableval"],
422 [config_coremidi_driver="yes"]
423 )
424 have_coremidi=0
425 if test "$config_coremidi_driver" = "yes"; then
426 AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
427 have_coremidi=1,
428 have_coremidi=0
429 )
430 if test "$have_coremidi" = "1"; then
431 have_midi_input_driver="true"
432 fi
433 else
434 echo "CoreMIDI support disabled by configure script parameter"
435 fi
436 AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
437 AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
438 config_have_coremidi="no"
439 if test $have_coremidi = "1"; then
440 config_have_coremidi="yes"
441 fi
442
443 # CoreAudio (OS X)
444 AC_ARG_ENABLE(coreaudio-driver,
445 [ --disable-coreaudio-driver
446 Disable support for the Apple CoreAudio system.],
447 [config_coreaudio_driver="$enableval"],
448 [config_coreaudio_driver="yes"]
449 )
450 have_coreaudio=0
451 if test "$config_coreaudio_driver" = "yes"; then
452 AC_CHECK_HEADER(CoreAudio/CoreAudio.h,
453 have_coreaudio=1,
454 have_coreaudio=0
455 )
456 if test "$have_coreaudio" = "1"; then
457 have_audio_output_driver="true"
458 fi
459 else
460 echo "CoreAudio support disabled by configure script parameter"
461 fi
462 AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1")
463 AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.])
464 config_have_coreaudio="no"
465 if test $have_coreaudio = "1"; then
466 config_have_coreaudio="yes"
467 fi
468
469 # MME MIDI (Win32)
470 AC_ARG_ENABLE(mmemidi-driver,
471 [ --disable-mmemidi-driver
472 Disable support for the Windows MME MIDI system.],
473 [config_mmemidi_driver="$enableval"],
474 [config_mmemidi_driver="yes"]
475 )
476 have_mmemidi=0
477 if test "$config_mmemidi_driver" = "yes"; then
478 AC_CHECK_HEADERS(mmsystem.h,
479 have_mmemidi=1,
480 have_mmemidi=0
481 )
482 if test "$have_mmemidi" = "1"; then
483 have_midi_input_driver="true"
484 fi
485 else
486 echo "MME MIDI support disabled by configure script parameter"
487 fi
488 AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
489 AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
490 config_have_mme="no"
491 if test $have_mmemidi = "1"; then
492 config_have_mme="yes"
493 fi
494
495 # DSSI
496 AC_CHECK_HEADERS(dssi.h,
497 config_have_dssi="yes",
498 config_have_dssi="no")
499 AM_CONDITIONAL(HAVE_DSSI, test $config_have_dssi = "yes")
500
501 # LV2
502 PKG_CHECK_MODULES(LV2, lv2core, config_have_lv2="yes", config_have_lv2="no")
503 if test $config_have_lv2 = "no"; then
504 AC_CHECK_HEADER(lv2.h, config_have_lv2="yes", config_have_lv2="no")
505 fi
506 AM_CONDITIONAL(HAVE_LV2, test $config_have_lv2 = "yes")
507
508 # VST
509 AC_ARG_ENABLE(vstsdk-dir,
510 [ --enable-vstsdk-dir
511 Directory where the VST SDK is located.
512 This automatically enables the compilation
513 of the VST plugin.],
514 [VSTSDK_DIR="${enableval}"],
515 [VSTSDK_DIR=]
516 )
517 AC_SUBST(VSTSDK_DIR)
518 AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
519 config_have_vst="no"
520 if test "x$VSTSDK_DIR" != "x"; then
521 config_have_vst="yes"
522 fi
523
524 # AU
525 AC_CHECK_HEADERS(AudioUnit/AudioUnit.h,
526 config_have_au="yes",
527 config_have_au="no")
528 AM_CONDITIONAL(HAVE_AU, test $config_have_au = "yes")
529 AM_CONDITIONAL(HAVE_AUFLAGS, test "$AUFLAGS" != "")
530
531
532 # have we found at least one MIDI input and one audio output driver ?
533 if test "$have_midi_input_driver" = "false"; then
534 echo "No supported MIDI input system found!"
535 echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
536 echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
537 echo "If you think you have one of those available on your system, make sure you"
538 echo "also have the respective development (header) files installed."
539 exit -1;
540 fi
541 if test "$have_audio_output_driver" = "false"; then
542 echo "No supported audio output system found!"
543 echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
544 echo "driver at the moment!"
545 exit -1;
546 fi
547
548
549
550 ###########################################################################
551 # Checks for various DLL libraries
552
553 # Check presence of libgig
554 libgig_version="3.3.0"
555 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
556 if test "$HAVE_GIG" = "false"; then
557 echo "Required libgig version not found!"
558 echo "You need to have libgig version ${libgig_version} installed!"
559 exit -1;
560 else
561 echo "yes, found libgig $libgig_version"
562 fi
563 AC_SUBST(GIG_CFLAGS)
564 AC_SUBST(GIG_LIBS)
565
566 # SF2 Engine (requires libgig)
567 AC_ARG_ENABLE(sf2-engine,
568 [ --disable-sf2-engine
569 Disable compilation of the SF2 engine.
570 You need to have libgig installed.],
571 [config_sf2_engine="$enableval"],
572 [config_sf2_engine="yes"]
573 )
574 HAVE_SF2=0;
575 if test "$config_sf2_engine" = "yes"; then
576 HAVE_SF2=1
577 else
578 echo "SF2 engine disabled by configure script parameter"
579 fi
580 AM_CONDITIONAL(HAVE_SF2, test $HAVE_SF2 = 1)
581 AC_DEFINE_UNQUOTED(HAVE_SF2,$HAVE_SF2,[Define to 1 if you want SF2 engine and have libsf2 installed.])
582 config_have_sf2="no"
583 if test $HAVE_SF2 = "1"; then
584 config_have_sf2="yes"
585 fi
586
587 # Check presence of libsndfile
588 libsndfile_version="1.0"
589 PKG_CHECK_MODULES(SNDFILE, sndfile >= $libsndfile_version, HAVE_SNDFILE=true, HAVE_SNDFILE=false)
590 if test "$HAVE_SNDFILE" = "false"; then
591 echo "Required libsndfile version not found!"
592 echo "You need to have libsndfile version ${libsndfile_version} installed!"
593 exit -1;
594 else
595 echo "yes, found libsndfile $libsndfile_version"
596 fi
597 AC_SUBST(SNDFILE_CFLAGS)
598 AC_SUBST(SNDFILE_LIBS)
599
600 # Check for Vorbis support in libsndfile
601 linuxsampler_save_CFLAGS=$CFLAGS
602 CFLAGS="$SNDFILE_CFLAGS $CFLAGS"
603 AC_CHECK_DECLS([SF_FORMAT_VORBIS], [], [] ,[[#include <sndfile.h>]])
604
605 # Check for loop functionality in libsndfile
606 AC_CHECK_MEMBERS([SF_INSTRUMENT.loops],,
607 [AC_MSG_WARN([Your version of libsndfile does not support
608 reading of loop information. LinuxSampler will not be able to
609 extract loop information from sample files.])],
610 [#include <sndfile.h>])
611 CFLAGS=$linuxsampler_save_CFLAGS
612
613 # Instruments DB feature (requires SQLite 3.3)
614 AC_ARG_ENABLE(instruments-db,
615 [ --disable-instruments-db
616 Disable compilation of the sampler's instruments
617 database feature. You need to have SQLite 3.3
618 or younger installed for this feature.],
619 [config_instruments_db="$enableval"],
620 [config_instruments_db="yes"]
621 )
622 HAVE_SQLITE3=0;
623 if test "$config_instruments_db" = "yes"; then
624 # Check presence of sqlite3
625 sqlite_version="3.3"
626 PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
627 AC_SUBST(SQLITE3_LIBS)
628 AC_SUBST(SQLITE3_CFLAGS)
629 if test $HAVE_SQLITE3 = false; then
630 HAVE_SQLITE3=0
631 config_instruments_db="no"
632 echo "*** Required sqlite version not found!"
633 echo "*** You need to have sqlite version ${sqlite_version} or higher"
634 echo "*** for instruments database support to be enabled."
635 echo "*** Support for instruments DB will be disabled!"
636 else
637 HAVE_SQLITE3=1
638 fi
639 else
640 echo "Instruments DB feature disabled by configure script parameter"
641 fi
642 AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
643 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
644
645
646
647 ###########################################################################
648 # Handle Configuration Options
649
650 # TODO: should we use AC_ARG_VAR(variable, description) instead?
651
652 AC_ARG_ENABLE(asm,
653 [ --disable-asm
654 Enable hand-crafted assembly optimizations
655 (default=on). LinuxSampler provides CPU specific
656 assembly optimizations. This is currently limited
657 to just enter a fast (denormal) FPU mode on x86
658 platforms. There are currently no synthesis core
659 assembly optimizations anymore since LS 0.4.0],
660 [config_asm="$enableval"],
661 [config_asm="yes"]
662 )
663 if test "$config_asm" = "yes"; then
664 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
665 fi
666
667 AC_ARG_ENABLE(dev-mode,
668 [ --enable-dev-mode
669 Enable development mode (default=off). In that mode
670 we do some extra sanity checks here and there.
671 This helps to spot possible problems, but reduces
672 efficiency a bit],
673 [config_dev_mode="$enableval"],
674 [config_dev_mode="no"]
675 )
676 if test "$config_dev_mode" = "yes"; then
677 AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
678 fi
679
680 AC_ARG_ENABLE(debug-level,
681 [ --enable-debug-level
682 Specify verbosity of console messages (default=1).
683 The higher the value, the higher will be verbosity.
684 A value of 0 means no console output at all.
685 There's not really an upper limit but the usual
686 level of all messages is currently somewhere less
687 than 10.],
688 [config_debug_level="${enableval}"],
689 [config_debug_level="1"]
690 )
691 AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
692
693 AC_ARG_ENABLE(rt-exceptions,
694 [ --enable-rt-exceptions
695 Enable exceptions in the realtime thread
696 (default=no). If this is enabled, exceptions will
697 be thrown on critical errors in the realtime
698 context as well. Otherwise if disabled
699 segmentation faults will be forced by the
700 application on critical errors.],
701 [config_rt_exceptions="$enableval"],
702 [config_rt_exceptions="no"]
703 )
704 if test "$config_rt_exceptions" = "yes"; then
705 AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
706 fi
707
708 AC_ARG_ENABLE(pthread-testcancel,
709 [ --enable-pthread-testcancel
710 Enable pthread_testcancel() calls and avoid asynchronous
711 cancel of pthreads (default=no).],
712 [config_pthread_testcancel="$enableval"],
713 [config_pthread_testcancel="no"]
714 )
715 if test "$config_pthread_testcancel" = "yes"; then
716 AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
717 fi
718
719 AC_ARG_ENABLE(preload-samples,
720 [ --enable-preload-samples
721 Due to seeking and latency issues with hard drives
722 we have to cache a small part of samples' head in
723 RAM (default=32768). The higher this value the
724 more memory will be occupied for each sample, but
725 the safer this will be in regards of possible
726 droputs. A 'good' value depends on the running
727 system and usage dependant factors.],
728 [config_preload_samples="${enableval}"],
729 [config_preload_samples="32768"]
730 )
731 AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
732
733 AC_ARG_ENABLE(max-pitch,
734 [ --enable-max-pitch
735 Specify the maximum allowed pitch value in octaves
736 (default=4). To lower memory usage you might want
737 set a smaller value.],
738 [config_max_pitch="${enableval}"],
739 [config_max_pitch="4"]
740 )
741 AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
742
743 AC_ARG_ENABLE(max-events,
744 [ --enable-max-events
745 Specify the maximum allowed amount of events to be
746 processed per fragment (default=1024).],
747 [config_max_events="${enableval}"],
748 [config_max_events="1024"]
749 )
750 AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
751
752 AC_ARG_ENABLE(eg-bottom,
753 [ --enable-eg-bottom
754 Bottom limit of envelope generators
755 (default=0.001). Certain kinds of curve types like
756 exponential curves converge against 0 but never
757 reach 0. So we have to define a certain low value
758 after which we should consider all smaller values
759 to be 'almost zero'. The smaller this value, the
760 longer will voices survive in EG's release stage
761 and thus waste voices. If this value is too high
762 will cause click sounds though.],
763 [config_eg_bottom="${enableval}"],
764 [config_eg_bottom="0.001"]
765 )
766 AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
767
768 AC_ARG_ENABLE(eg-min-release-time,
769 [ --enable-eg-min-release-time
770 Specify the lowest allowed release time in seconds
771 (default=0.0025). This value will also be used to
772 ramp down voices on voice stealing. This value
773 should always be less than the period time of the
774 used audio driver, as in case of voice stealing
775 the killed voice needs to be completely ramped
776 down in the same fragment.],
777 [config_eg_min_release_time="${enableval}"],
778 [config_eg_min_release_time="0.0025"]
779 )
780 AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
781
782 AC_ARG_ENABLE(refill-streams,
783 [ --enable-refill-streams
784 Number of streams that should be refilled in each
785 disk thread cycle (default=4).],
786 [config_refill_streams="${enableval}"],
787 [config_refill_streams="4"]
788 )
789 AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
790
791 AC_ARG_ENABLE(stream-min-refill,
792 [ --enable-stream-min-refill
793 Minimum refill size for disk streams (default=1024).
794 The disk thread will go to sleep for a while if no
795 stream had to be refilled more than this value in
796 a disk thread cycle.],
797 [config_stream_min_refill="${enableval}"],
798 [config_stream_min_refill="1024"]
799 )
800 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
801
802 AC_ARG_ENABLE(stream-max-refill,
803 [ --enable-stream-max-refill
804 Maximum refill size for disk streams
805 (default=65536). The disk thread will refill
806 each stream only by a size of this value per
807 disk thread cycle.],
808 [config_stream_max_refill="${enableval}"],
809 [config_stream_max_refill="65536"]
810 )
811 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
812
813 AC_ARG_ENABLE(stream-size,
814 [ --enable-stream-size
815 Size of each stream's ring buffer in sample points
816 (default=262144).],
817 [config_stream_size="${enableval}"],
818 [config_stream_size="262144"]
819 )
820 AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
821
822 AC_ARG_ENABLE(max-streams,
823 [ --enable-max-streams
824 Initial maximum amount of disk streams
825 (default=90). This value can be changed at
826 runtime. It should always be higher than the
827 maximum amount of voices.],
828 [config_max_streams="${enableval}"],
829 [config_max_streams="90"]
830 )
831 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
832
833 AC_ARG_ENABLE(max-voices,
834 [ --enable-max-voices
835 Initial maximum amount of voices (default=64).
836 This value can be changed at runtime. It should
837 always be lower than the maximum amount of disk
838 streams.],
839 [config_max_voices="${enableval}"],
840 [config_max_voices="64"]
841 )
842 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
843
844 AC_ARG_ENABLE(subfragment-size,
845 [ --enable-subfragment-size
846 Every audio fragment will be splitted into
847 subfragments. Where each subfragment renders
848 audio with constant synthesis parameters. This is
849 done for efficiency reasons. This parameter
850 defines the default size of a subfragment in
851 sample points. A large value means less CPU time
852 whereas a low value means better audio quality
853 (default=32).],
854 [config_subfragment_size="${enableval}"],
855 [config_subfragment_size="32"]
856 )
857 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
858
859 AC_ARG_ENABLE(global-attenuation-default,
860 [ --enable-global-attenuation-default
861 To prevent clipping all samples will be lowered
862 in amplitude by this given default factor (can
863 be overridden at runtime).
864 (default=0.35)],
865 [config_global_attenuation_default="${enableval}"],
866 [config_global_attenuation_default="0.35"]
867 )
868 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
869
870 AC_ARG_ENABLE(voice-steal-algo,
871 [ --enable-voice-steal-algo
872 Voice stealing algorithm to be used. Currently
873 available options:
874 none:
875 Disable voice stealing completely.
876 oldestvoiceonkey (default):
877 Try to kill a voice on the same key first,
878 if no success, proceed with the oldest key.
879 oldestkey:
880 Try to kill a voice from the oldest active
881 key.],
882 [ if test ! "(" "${enableval}" = "none" \
883 -o "${enableval}" = "oldestvoiceonkey" \
884 -o "${enableval}" = "oldestkey" ")" ; then
885 AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
886 else
887 config_voice_steal_algo="${enableval}"
888 fi
889 ],
890 [config_voice_steal_algo="oldestvoiceonkey"]
891 )
892 AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
893
894 AC_ARG_ENABLE(sysex-buffer-size,
895 [ --enable-sysex-buffer-size
896 System Exclusive Message buffer size in kB
897 (default=2048).],
898 [config_sysex_buffer_size="${enableval}"],
899 [config_sysex_buffer_size="2048"]
900 )
901 AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
902
903 AC_ARG_ENABLE(force-filter,
904 [ --enable-force-filter
905 If enabled will force filter to be used even if
906 no usage was define in instrument patch files.
907 (default=no).],
908 [config_force_filter="$enableval"],
909 [config_force_filter="no"]
910 )
911 if test "$config_force_filter" = "yes"; then
912 AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
913 fi
914
915 AC_ARG_ENABLE(filter-cutoff-min,
916 [ --enable-filter-cutoff-min
917 Minimum filter cutoff frequency in Hz
918 (default=100.0).],
919 [config_filter_cutoff_min="${enableval}"],
920 [config_filter_cutoff_min="100.0"]
921 )
922 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
923
924 AC_ARG_ENABLE(filter-cutoff-max,
925 [ --enable-filter-cutoff-max
926 Maximum filter cutoff frequency in Hz
927 (default=10000.0).],
928 [config_filter_cutoff_max="${enableval}"],
929 [config_filter_cutoff_max="10000.0"]
930 )
931 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
932
933 AC_ARG_ENABLE(override-cutoff-ctrl,
934 [ --enable-override-cutoff-ctrl
935 Override filter cutoff MIDI controller (default=no).
936 Note: you have to define the MIDI controller number
937 here, it's not a boolean parameter type! If this
938 option is used, controller number given by
939 instrument patch will be ignored and instead this
940 supplied value will be used.],
941 [config_override_cutoff_ctrl="${enableval}"],
942 [config_override_cutoff_ctrl="no"]
943 )
944 if test ! "$config_override_cutoff_ctrl" = "no"; then
945 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
946 fi
947
948 AC_ARG_ENABLE(override-resonance-ctrl,
949 [ --enable-override-resonance-ctrl
950 Override filter resonance MIDI controller
951 (default=no). Note: you have to define the MIDI
952 controller number here, it's not a boolean
953 parameter type! If this option is used, controller
954 number given by instrument patch will be ignored
955 and instead this supplied value will be used.],
956 [config_override_resonance_ctrl="${enableval}"],
957 [config_override_resonance_ctrl="no"]
958 )
959 if test ! "$config_override_resonance_ctrl" = "no"; then
960 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
961 fi
962
963 AC_ARG_ENABLE(override-filter-type,
964 [ --enable-override-filter-type
965 Override filter type (default=no). Options:
966 hp: for highpass
967 bp: for bandpass
968 br: for bandreject
969 lp: for lowpass
970 lpt: for lowpass turbo],
971 [ if test "${enableval}" = "hp" ; then
972 config_override_filter_type="::gig::vcf_type_highpass"
973 elif test "${enableval}" = "bp" ; then
974 config_override_filter_type="::gig::vcf_type_bandpass"
975 elif test "${enableval}" = "br" ; then
976 config_override_filter_type="::gig::vcf_type_bandreject"
977 elif test "${enableval}" = "lp" ; then
978 config_override_filter_type="::gig::vcf_type_lowpass"
979 elif test "${enableval}" = "lpt" ; then
980 config_override_filter_type="::gig::vcf_type_lowpassturbo"
981 elif test ! "${enableval}" = "no"; then
982 AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
983 fi
984 ],
985 [config_override_filter_type="no"]
986 )
987 if test ! "$config_override_filter_type" = "no"; then
988 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
989 fi
990
991 AC_ARG_ENABLE(gs-checksum,
992 [ --enable-gs-checksum
993 Enable Roland General Synth SysEx checksum check
994 (default=no). If this is enabled, all GS SysEx
995 messages which do not provide a correct checksum
996 will be ignored. This is disabled by default as
997 not all devices honor GS checksums.],
998 [config_assert_gs_sysex_checksum="$enableval"],
999 [config_assert_gs_sysex_checksum="no"]
1000 )
1001 if test "config_assert_gs_sysex_checksum" = "yes"; then
1002 AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
1003 fi
1004
1005 AC_ARG_ENABLE(portamento-time-min,
1006 [ --enable-portamento-time-min
1007 Minimum Portamento time in seconds
1008 (default=0.1).],
1009 [config_portamento_time_min="${enableval}"],
1010 [config_portamento_time_min="0.1"]
1011 )
1012 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
1013
1014 AC_ARG_ENABLE(portamento-time-max,
1015 [ --enable-portamento-time-max
1016 Maximum Portamento time in seconds
1017 (default=32).],
1018 [config_portamento_time_max="${enableval}"],
1019 [config_portamento_time_max="32"]
1020 )
1021 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
1022
1023 AC_ARG_ENABLE(portamento-time-default,
1024 [ --enable-portamento-time-default
1025 Default Portamento time in seconds
1026 (default=1).],
1027 [config_portamento_time_default="${enableval}"],
1028 [config_portamento_time_default="1"]
1029 )
1030 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
1031
1032 AC_ARG_ENABLE(signed-triang-algo,
1033 [ --enable-signed-triang-algo
1034 Signed triangular wave algorithm to be used (e.g. for LFOs).
1035 Currently available options:
1036 intmath:
1037 Uses integer math without any branch will then be
1038 converted to floating point value for each sample point.
1039 This int->float conversion might hurt on some systems.
1040 intmathabs:
1041 Similar to intmath but uses abs() function.
1042 Depending on compiler and platrofm this could
1043 perform better than integer math as it avoids
1044 an extra integer multiply instruction.
1045 diharmonic:
1046 The triangular wave will be approximated by adding two
1047 sinusoidials. This solution might especially hurt on
1048 systems with weak floating point unit.
1049 benchmark (default):
1050 This is not an algorithm. Use this option if the
1051 appropriate algorithm should be automatically
1052 chosen by the configure script by performing a
1053 benchmark between the algorithms mentioned above.
1054 This will NOT work for cross compilation!],
1055 [ if test ! "(" "${enableval}" = "intmath" \
1056 -o "${enableval}" = "intmathabs" \
1057 -o "${enableval}" = "diharmonic" ")" ; then
1058 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
1059 else
1060 config_signed_triang_algo="${enableval}"
1061 fi
1062 ],
1063 [config_signed_triang_algo="benchmark"]
1064 )
1065
1066 AC_ARG_ENABLE(unsigned-triang-algo,
1067 [ --enable-unsigned-triang-algo
1068 Unsigned triangular wave algorithm to be used (e.g. for LFOs).
1069 Currently available options:
1070 intmath:
1071 Uses integer math without any branch will then be
1072 converted to floating point value for each sample point.
1073 This int->float conversion might hurt on some systems.
1074 intmathabs:
1075 Similar to intmath but uses abs() function.
1076 Depending on compiler and platrofm this could
1077 perform better than integer math as it avoids
1078 an extra integer multiply instruction.
1079 diharmonic:
1080 The triangular wave will be approximated by adding two
1081 sinusoidials. This solution might especially hurt on
1082 systems with weak floating point unit.
1083 benchmark (default):
1084 This is not an algorithm. Use this option if the
1085 appropriate algorithm should be automatically
1086 chosen by the configure script by performing a
1087 benchmark between the algorithms mentioned above.
1088 This will NOT work for cross compilation!],
1089 [ if test ! "(" "${enableval}" = "intmath" \
1090 -o "${enableval}" = "intmathabs" \
1091 -o "${enableval}" = "diharmonic" ")" ; then
1092 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
1093 else
1094 config_unsigned_triang_algo="${enableval}"
1095 fi
1096 ],
1097 [config_unsigned_triang_algo="benchmark"]
1098 )
1099
1100 AC_ARG_ENABLE(process-muted-channels,
1101 [ --enable-process-muted-channels
1102 Enable processing of muted channels (default=no).
1103 In that mode all MIDI events in the muted channels
1104 will be processed. This will provide information
1105 about the active voices in the muted channels and
1106 will not discard notes, triggered in mute mode,
1107 when the channel is unmuted. But also will reduce
1108 the efficiency.],
1109 [config_process_muted_channels="$enableval"],
1110 [config_process_muted_channels="no"]
1111 )
1112 if test "$config_process_muted_channels" = "yes"; then
1113 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
1114 fi
1115
1116 AC_ARG_ENABLE(process-all-notes-off,
1117 [ --disable-process-all-notes-off
1118 Disable interpretation of All-Notes-Off MIDI
1119 messages (default=on). By default LS will release
1120 all voices whenever it receives an All-Notes-Off
1121 MIDI message. You can disable this behavior, so
1122 that LS simply ignores such messages.],
1123 [config_process_all_notes_off="$enableval"],
1124 [config_process_all_notes_off="yes"]
1125 )
1126 if test "$config_process_all_notes_off" = "yes"; then
1127 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
1128 fi
1129
1130 AC_ARG_ENABLE(interpolate-volume,
1131 [ --disable-interpolate-volume
1132 Disable interpolation of volume modulation
1133 (default=on). With this enabled, the volume changes
1134 generated by for example the envelope generator
1135 will be smoother, minimizing the risk for audio
1136 clicks. Disable it to reduce CPU usage.],
1137 [config_interpolate_volume="$enableval"],
1138 [config_interpolate_volume="yes"]
1139 )
1140 if test "$config_interpolate_volume" = "yes"; then
1141 AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
1142 fi
1143
1144 AC_ARG_ENABLE(master-volume-sysex-by-port,
1145 [ --enable-master-volume-sysex-by-port
1146 Whether global volume sysex message should be
1147 applied globally to the whole sampler or only to
1148 the sampler channels connected to the same MIDI
1149 input port on which the sysex message arrived on.
1150 By default global volume sysex messages apply
1151 globally to the whole sampler, since many MIDI
1152 devices behave that way.],
1153 [config_master_volume_sysex_by_port="$enableval"],
1154 [config_master_volume_sysex_by_port="no"]
1155 )
1156 if test "$config_master_volume_sysex_by_port" = "yes"; then
1157 AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
1158 fi
1159
1160 AC_ARG_ENABLE(plugin-dir,
1161 [ --enable-plugin-dir
1162 Directory where the sampler shall look for potential plugins,
1163 that is 3rd party shared libraries that should be loaded by
1164 the sampler on startup. By default the sampler will search
1165 for plugins in the subdirectory "plugins" below its own
1166 library directory.
1167 (i.e. /usr/local/lib/linuxsampler/plugins)],
1168 [config_plugin_dir="${enableval}"],
1169 [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1170 )
1171 AC_SUBST(config_plugin_dir)
1172
1173 AC_ARG_ENABLE(default-instruments-db-location,
1174 [ --enable-default-instruments-db-location
1175 Only when instruments DB feature is enabled: file name
1176 which shall be taken as default location of the
1177 instruments DB file. This location can still be
1178 overridden at runtime with a command line switch.
1179 (default: /var/lib/linuxsampler/instruments.db)],
1180 [config_default_instruments_db_file="${enableval}"],
1181 [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1182 )
1183 AC_DEFINE_UNQUOTED(
1184 CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1185 "$config_default_instruments_db_file",
1186 [Only when instruments DB feature is enabled: default location of the DB file.]
1187 )
1188 AC_SUBST(config_default_instruments_db_file)
1189
1190
1191 ###########################################################################
1192 # Automatic Benchmarks (to detect the best algorithms for the system)
1193
1194 AC_LANG_SAVE
1195
1196 if test "$config_signed_triang_algo" = "benchmark"; then
1197 echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1198 AC_LANG_CPLUSPLUS
1199 AC_TRY_RUN([
1200 #define SIGNED 1
1201 #define SILENT 1
1202 #include "${srcdir}/benchmarks/triang.cpp"
1203 ],
1204 triang_signed=0,
1205 triang_signed=$?,
1206 triang_signed=0
1207 )
1208 if test "$triang_signed" = "2"; then
1209 config_signed_triang_algo="intmath"
1210 echo "integer math"
1211 elif test "$triang_signed" = "3"; then
1212 config_signed_triang_algo="diharmonic"
1213 echo "di harmonics"
1214 elif test "$triang_signed" = "5"; then
1215 config_signed_triang_algo="intmathabs"
1216 echo "integer math using abs()"
1217 else
1218 echo "Benchmark of signed triangular wave algorithms failed!"
1219 echo "Maybe you are doing cross compilation? In that case you have to select"
1220 echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1221 echo "Call './configure --help' for further information or read configure.in."
1222 exit -1;
1223 fi
1224 else
1225 case "$config_signed_triang_algo" in
1226 intmath)
1227 triang_signed=2 ;;
1228 diharmonic)
1229 triang_signed=3 ;;
1230 intmathabs)
1231 triang_signed=5 ;;
1232 esac
1233 fi
1234 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1235
1236 if test "$config_unsigned_triang_algo" = "benchmark"; then
1237 echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1238 AC_LANG_CPLUSPLUS
1239 AC_TRY_RUN([
1240 #define SIGNED 0
1241 #define SILENT 1
1242 #include "${srcdir}/benchmarks/triang.cpp"
1243 ],
1244 triang_unsigned=0,
1245 triang_unsigned=$?,
1246 triang_unsigned=0
1247 )
1248 if test "$triang_unsigned" = "2"; then
1249 config_unsigned_triang_algo="intmath"
1250 echo "integer math"
1251 elif test "$triang_unsigned" = "3"; then
1252 config_unsigned_triang_algo="diharmonic"
1253 echo "di harmonics"
1254 elif test "$triang_unsigned" = "5"; then
1255 config_unsigned_triang_algo="intmathabs"
1256 echo "integer math using abs()"
1257 else
1258 echo "Benchmark of unsigned triangular wave algorithms failed!"
1259 echo "Maybe you are doing cross compilation? In that case you have to select"
1260 echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1261 echo "Call './configure --help' for further information or read configure.in."
1262 exit -1;
1263 fi
1264 else
1265 case "$config_unsigned_triang_algo" in
1266 intmath)
1267 triang_unsigned=2 ;;
1268 diharmonic)
1269 triang_unsigned=3 ;;
1270 intmathabs)
1271 triang_unsigned=5 ;;
1272 esac
1273 fi
1274 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1275
1276 AC_LANG_RESTORE
1277
1278
1279 ###########################################################################
1280 # Create Build Files
1281
1282 AM_CONFIG_HEADER(config.h)
1283 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1284
1285 AC_LANG_CPLUSPLUS
1286
1287 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1288 # this, the dlfcn.h check in am_prog_libtool may fail.
1289 AC_CHECK_HEADER(stdlib.h)
1290
1291 AC_OUTPUT( \
1292 Makefile \
1293 man/Makefile \
1294 man/linuxsampler.1 \
1295 src/Makefile \
1296 src/db/Makefile \
1297 src/network/Makefile \
1298 src/engines/Makefile \
1299 src/engines/gig/Makefile \
1300 src/engines/sf2/Makefile \
1301 src/engines/sfz/Makefile \
1302 src/engines/common/Makefile \
1303 src/effects/Makefile \
1304 src/common/Makefile \
1305 src/testcases/Makefile \
1306 src/drivers/Makefile \
1307 src/drivers/audio/Makefile \
1308 src/drivers/midi/Makefile \
1309 src/plugins/Makefile \
1310 src/hostplugins/Makefile \
1311 src/hostplugins/dssi/Makefile \
1312 src/hostplugins/lv2/Makefile \
1313 src/hostplugins/vst/Makefile \
1314 src/hostplugins/au/Makefile \
1315 linuxsampler.spec \
1316 debian/Makefile \
1317 Artwork/Makefile \
1318 scripts/Makefile \
1319 osx/Makefile \
1320 osx/linuxsampler.xcodeproj/Makefile \
1321 Documentation/Makefile \
1322 Documentation/Engines/Makefile \
1323 Documentation/Engines/gig/Makefile \
1324 linuxsampler.pc \
1325 Doxyfile \
1326 )
1327
1328 # resolve all nested variables in '${config_plugin_dir}'
1329 # (merely for providing a human readable summary below)
1330 while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1331 config_plugin_dir=`eval echo ${config_plugin_dir}`
1332 done
1333
1334
1335 ###########################################################################
1336 # Output All Configuration Options
1337
1338 echo ""
1339 echo "#####################################################################"
1340 echo "# LinuxSampler Configuration #"
1341 echo "#-------------------------------------------------------------------#"
1342 echo "# Release Version: ${LINUXSAMPLER_RELEASE_MAJOR}.${LINUXSAMPLER_RELEASE_MINOR}.${LINUXSAMPLER_RELEASE_BUILD}"
1343 echo "# LSCP Version: ${LSCP_RELEASE_MAJOR}.${LSCP_RELEASE_MINOR}"
1344 echo "#-------------------------------------------------------------------"
1345 echo "# Assembly Optimizations: ${config_asm}"
1346 echo "# Development Mode: ${config_dev_mode}"
1347 echo "# Debug Level: ${config_debug_level}"
1348 echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1349 echo "# Preload Samples: ${config_preload_samples}"
1350 echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1351 echo "# Maximum Events: ${config_max_events}"
1352 echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1353 echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1354 echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1355 echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1356 echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1357 echo "# Stream Size: ${config_stream_size}"
1358 echo "# Default Maximum Disk Streams: ${config_max_streams}"
1359 echo "# Default Maximum Voices: ${config_max_voices}"
1360 echo "# Default Subfragment Size: ${config_subfragment_size}"
1361 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1362 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1363 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1364 echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1365 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1366 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1367 echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1368 echo "# Default Portamento Time: ${config_portamento_time_default} s"
1369 echo "# Force Filter Usage: ${config_force_filter}"
1370 echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1371 echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1372 echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1373 echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1374 echo "# Override Filter Type: ${config_override_filter_type}"
1375 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1376 echo "# Process Muted Channels: ${config_process_muted_channels}"
1377 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1378 echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
1379 echo "# Interpolate Volume: ${config_interpolate_volume}"
1380 echo "# Instruments database support: ${config_instruments_db}"
1381 if test "$config_instruments_db" = "yes"; then
1382 echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1383 fi
1384 echo "# Plugin Path: ${config_plugin_dir}"
1385 echo "#-------------------------------------------------------------------"
1386 echo "# MIDI Input Drivers:"
1387 echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack_midi}, CoreMIDI: ${config_have_coremidi}, MME: ${config_have_mme}, MidiShare: ${config_have_midishare}"
1388 echo "#-------------------------------------------------------------------"
1389 echo "# Audio Output Drivers:"
1390 echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack}, ARTS: ${config_have_arts}, CoreAudio: ${config_have_coreaudio}, ASIO: ${config_have_asio}"
1391 echo "#-------------------------------------------------------------------"
1392 echo "# Sampler Engines:"
1393 echo "# GIG: yes, SF2: ${config_have_sf2}, SFZ: yes"
1394 echo "#-------------------------------------------------------------------"
1395 echo "# Effect plugin systems for internal effects:"
1396 echo "# LADSPA: yes"
1397 echo "#-------------------------------------------------------------------"
1398 echo "# Building sampler as plugin for following host standards:"
1399 echo "# DSSI: ${config_have_dssi}, LV2: ${config_have_lv2}, VST: ${config_have_vst}, AU: ${config_have_au}"
1400 echo "#-------------------------------------------------------------------#"
1401 echo "# Read './configure --help' or file 'configure.in' for details. #"
1402 echo "#####################################################################"
1403 echo ""
1404 echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1405 echo ""

  ViewVC Help
Powered by ViewVC