/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Contents of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 2183 - (show annotations) (download)
Sat Jun 11 17:53:32 2011 UTC (12 years, 9 months ago) by persson
Original Path: linuxsampler/trunk/configure.in
File size: 57255 byte(s)
* Mac OS X fixes: support the new dir for Core Audio SDK, fixed name
  collision of enum in EffectControl, fixed building outside source
  directory, fixed wrong name of destructor in
  AudioOutputDeviceCoreAudio.cpp
* made sure all source files for hostplugins are included when doing
  "make dist"
* removed empty directories left from the cvs to svn migration

1 AC_INIT(configure.in)
2
3 #------------------------------------------------------------------------------------
4 # LinuxSampler's / liblinuxsampler's "official" release version:
5
6 LINUXSAMPLER_RELEASE_MAJOR=1
7 LINUXSAMPLER_RELEASE_MINOR=0
8 LINUXSAMPLER_RELEASE_BUILD=0.cvs10
9
10 #------------------------------------------------------------------------------------
11 # The following is the libtool / shared library version. This doesn't have to
12 # do anything with the release version. It MUST conform to the following rules:
13 #
14 # 1. Start with version information of `0:0:0' for each libtool library.
15 # 2. Update the version information only immediately before a public release of
16 # your software. More frequent updates are unnecessary, and only guarantee
17 # that the current interface number gets larger faster.
18 # 3. If the library source code has changed at all since the last update, then
19 # increment revision (`c:r:a' becomes `c:r+1:a').
20 # 4. If any interfaces have been added, removed, or changed since the last update,
21 # increment current, and set revision to 0.
22 # 5. If any interfaces have been added since the last public release, then increment
23 # age.
24 # 6. If any interfaces have been removed since the last public release, then set age
25 # to 0.
26
27 LIBLINUXSAMPLER_LT_CURRENT=3
28 LIBLINUXSAMPLER_LT_REVISION=0
29 LIBLINUXSAMPLER_LT_AGE=0
30 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31
32 #------------------------------------------------------------------------------------
33 # the LSCP specification version this LinuSampler release complies with:
34
35 LSCP_RELEASE_MAJOR=1
36 LSCP_RELEASE_MINOR=5
37
38 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40
41 AC_PROG_CXX
42 AC_LIBTOOL_WIN32_DLL
43 AM_PROG_LIBTOOL
44
45 AC_SUBST(SHLIB_VERSION_ARG)
46 AC_SUBST(SHARED_VERSION_INFO)
47
48 AC_C_BIGENDIAN
49 AC_CANONICAL_HOST
50
51 PKG_PROG_PKG_CONFIG
52
53 ###########################################################################
54 # General Checks
55
56 AM_CONDITIONAL(CROSS_COMPILING, test $cross_compiling = yes)
57
58 AC_MSG_CHECKING([whether x86 architecture])
59 def_arch_x86=0
60 case $host_cpu in
61 "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
62 echo "yes"
63 def_arch_x86=1;;
64 *)
65 echo "no";;
66 esac
67 AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
68
69 # determine the right gcc switch for CPU specific optimizations
70 # (only if the user did not provide one)
71 CXX_CPU_SWITCH=
72 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
73 if test "$def_arch_x86" = 1 -a "$host_cpu" != "x86_64"; then
74 CXX_CPU_SWITCH="-march=$host_cpu"
75 elif test "$target_cpu" = "ppc"; then
76 CXX_CPU_SWITCH="-arch=$host_cpu"
77 fi
78 fi
79 AC_SUBST([CXX_CPU_SWITCH])
80
81 # check if we're on MS Windows
82 AC_CHECK_HEADERS(
83 mmsystem.h,
84 have_windows=1,
85 have_windows=0,
86 [#include <windef.h>]
87 )
88 AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
89
90 AC_MSG_CHECKING([whether UNIX98 compatible])
91 AC_LANG_SAVE
92 AC_LANG_C
93 AC_TRY_RUN([
94 #ifndef _GNU_SOURCE
95 #define _GNU_SOURCE 1
96 #endif
97 #include <features.h>
98 void main(void) {
99 #if _XOPEN_SOURCE >= 500
100 exit(0); /* UNIX98 compatible */
101 #else
102 exit(-1); /* not UNIX98 compatible */
103 #endif
104 }
105 ],
106 have_unix98="yes",
107 have_unix98="no",
108 have_unix98="no"
109 )
110 AC_LANG_RESTORE
111 AC_MSG_RESULT([$have_unix98])
112 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
113 if test "x$HAVE_UNIX98" = "x"; then
114 echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
115 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
116 echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
117 echo "have a UNIX98 compatible system."
118 exit -1;
119 fi
120 fi
121
122 # check for <features.h>
123 AC_CHECK_HEADERS(features.h)
124
125 # test for POSIX thread library
126 m4_ifdef([m4_include(m4/pthread.m4)],,
127 [sinclude([m4/pthread.m4])])
128 ACX_PTHREAD
129 LIBS="$PTHREAD_LIBS $LIBS"
130 CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
131 CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
132 CC="$PTHREAD_CC"
133
134 # check for a bug in NPTL-enabled glibc
135 # (see Gentoo bug report #194076)
136 AC_ARG_ENABLE(nptl-bug-check,
137 [ --disable-nptl-bug-check
138 Disable check for a bug in certain NPTL-enabled
139 glibc versions that caused crashs.],
140 [config_check_nptl_bug="$enableval"],
141 [config_check_nptl_bug="yes"]
142 )
143 if test "$config_check_nptl_bug" = "yes"; then
144 m4_ifdef([m4_include(m4/nptl_bug.m4)],,
145 [sinclude([m4/nptl_bug.m4])])
146 ACX_NPTL_GLIBC_BUG([
147 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
148 echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
149 echo "probably crash due to this. Please report us the system you are"
150 echo "using and/or file a bug report to the bug tracking system of"
151 echo "your distribution."
152 echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
153 echo "well, you can try to circumvent this problem for now by setting"
154 echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
155 echo "should cause this test to pass."
156 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
157 AC_MSG_ERROR([possibly NPTL glibc bug detected])
158 ])
159 else
160 echo "NPTL glibc bug check disabled"
161 fi
162
163 # FIXME: this is actually a dependency of libgig, not of LS directly, why
164 # isn't it hidden by libgig?
165 AC_CHECK_HEADERS(uuid/uuid.h)
166 AC_SEARCH_LIBS(uuid_generate, uuid)
167
168
169
170 ###########################################################################
171 # Checks for available audio and MIDI systems / drivers
172 # (we throw an error if there's not at least one system for audio output and MIDI input available)
173
174 have_midi_input_driver="false"
175 have_audio_output_driver="false"
176
177 # ALSA
178 AC_ARG_ENABLE(alsa-driver,
179 [ --disable-alsa-driver
180 Disable support for the Advanced Linux Sound
181 Architecture (ALSA).],
182 [config_alsa_driver="$enableval"],
183 [config_alsa_driver="yes"]
184 )
185 have_alsa=0
186 if test "$config_alsa_driver" = "yes"; then
187 AC_CHECK_HEADER(alsa/asoundlib.h,
188 AC_CHECK_LIB(asound, main,
189 have_alsa=1
190 ,
191 have_alsa=0
192 )
193 ,
194 have_alsa=0
195 )
196 if test "$have_alsa" = "1"; then
197 have_midi_input_driver="true"
198 have_audio_output_driver="true";
199 fi
200
201 echo -n "checking Alsa version... "
202 AC_LANG_SAVE
203 AC_LANG_C
204 AC_TRY_RUN([
205 #include <alsa/asoundlib.h>
206 void main(void) {
207 /* ensure backward compatibility */
208 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
209 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
210 #endif
211 exit(SND_LIB_MAJOR);
212 }
213 ],
214 alsa_major=0,
215 alsa_major=$?,
216 alsa_major=0
217 )
218 AC_TRY_RUN([
219 #include <alsa/asoundlib.h>
220 void main(void) {
221 /* ensure backward compatibility */
222 #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
223 #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
224 #endif
225 exit(SND_LIB_MINOR);
226 }
227 ],
228 alsa_minor=0,
229 alsa_minor=$?,
230 alsa_minor=0
231 )
232 AC_TRY_RUN([
233 #include <alsa/asoundlib.h>
234 void main(void) {
235 /* ensure backward compatibility */
236 #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
237 #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
238 #endif
239 exit(SND_LIB_SUBMINOR);
240 }
241 ],
242 alsa_subminor=0,
243 alsa_subminor=$?,
244 alsa_subminor=0
245 )
246 AC_LANG_RESTORE
247 echo "$alsa_major.$alsa_minor.$alsa_subminor";
248 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
249 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
250 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
251 else
252 echo "ALSA support disabled by configure script parameter"
253 fi
254 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
255 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
256 config_have_alsa="no"
257 if test $have_alsa = "1"; then
258 config_have_alsa="yes"
259 fi
260
261 # JACK
262 AC_ARG_ENABLE(jack-driver,
263 [ --disable-jack-driver
264 Disable support for the Jack Audio Connection Kit
265 (JACK).],
266 [config_jack_driver="$enableval"],
267 [config_jack_driver="yes"]
268 )
269 have_jack=0
270 if test "$config_jack_driver" = "yes"; then
271 PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
272 if test $have_jack = "1"; then
273 AC_SUBST(JACK_LIBS)
274 AC_SUBST(JACK_CFLAGS)
275 linuxsampler_save_LIBS=$LIBS
276 LIBS="$JACK_LIBS $LIBS"
277 AC_CHECK_FUNCS(jack_client_name_size jack_client_open)
278 LIBS=$linuxsampler_save_LIBS
279 have_audio_output_driver="true";
280 fi
281 else
282 echo "JACK support disabled by configure script parameter"
283 fi
284 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
285 AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
286 config_have_jack="no"
287 if test $have_jack = "1"; then
288 config_have_jack="yes"
289 fi
290
291 # JACK MIDI
292 have_jack_midi=0
293 if test $have_jack = "1"; then
294 linuxsampler_save_CFLAGS=$CFLAGS
295 linuxsampler_save_LIBS=$LIBS
296 CFLAGS="$JACK_CFLAGS $CFLAGS"
297 LIBS="$JACK_LIBS $LIBS"
298 AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
299 if test $have_jack_midi = "1"; then
300 AC_CHECK_FUNCS(jack_midi_get_event_count)
301 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
302 jack_midi_clear_buffer(0, 0);
303 ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
304 [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
305 have_midi_input_driver="true"
306 fi
307 CFLAGS=$linuxsampler_save_CFLAGS
308 LIBS=$linuxsampler_save_LIBS
309 fi
310 AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
311 AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
312 [Define to 1 if you have JACK with MIDI support installed.])
313 config_have_jack_midi="no"
314 if test $have_jack_midi = "1"; then
315 config_have_jack_midi="yes"
316 fi
317
318 # ARTS
319 AC_ARG_ENABLE(arts-driver,
320 [ --disable-arts-driver
321 Disable support for the Analogue Realtime System
322 (aRts).],
323 [config_arts_driver="$enableval"],
324 [config_arts_driver="yes"]
325 )
326 have_arts=0
327 if test "$config_arts_driver" = "yes"; then
328 m4_ifdef([m4_include(m4/arts.m4)],,
329 [sinclude([m4/arts.m4])])
330 AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
331 if test "$have_arts" = "1"; then
332 have_audio_output_driver="true"
333 fi
334 else
335 echo "ARTS support disabled by configure script parameter"
336 fi
337 AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
338 AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
339 config_have_arts="no"
340 if test $have_arts = "1"; then
341 config_have_arts="yes"
342 fi
343
344 # ASIO AUDIO (Win32)
345 AC_ARG_ENABLE(asiosdk-dir,
346 [ --enable-asiosdk-dir
347 Directory where the ASIO SDK is located, this automatically
348 enables the compilation of the ASIO audio output driver.],
349 [config_asiosdk_dir="${enableval}"],
350 [config_asiosdk_dir="."]
351 )
352 AC_SUBST(config_asiosdk_dir)
353
354 AC_ARG_ENABLE(asio-driver,
355 [ --disable-asio-driver
356 Disable support for the Windows ASIO driver.],
357 [config_asio_driver="$enableval"],
358 [config_asio_driver="yes"]
359 )
360 have_asio=0
361 ASIOSDK_BASEDIR=
362 if test "$config_asio_driver" = "yes"; then
363 asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
364 echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
365 if test -e $asiosdk_headerfile ; then
366 echo yes
367 have_asio=1
368 ASIOSDK_BASEDIR="$config_asiosdk_dir"
369 else
370 echo no
371 have_asio=0
372 fi
373 if test "$have_asio" = "1"; then
374 have_audio_output_driver="true"
375 fi
376 else
377 echo "Windows ASIO support disabled by configure script parameter"
378 fi
379 AC_SUBST(ASIOSDK_BASEDIR)
380 AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
381 AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
382 config_have_asio="no"
383 if test $have_asio = "1"; then
384 config_have_asio="yes"
385 fi
386
387 # MidiShare (Linux, OS X, Windows)
388 AC_ARG_ENABLE(midishare-driver,
389 [ --disable-midishare-driver
390 Disable support for the MidiShare system.],
391 [config_midishare_driver="$enableval"],
392 [config_midishare_driver="yes"]
393 )
394 have_midishare=0
395 if test "$config_midishare_driver" = "yes"; then
396 AC_CHECK_HEADER(MidiShare.h,
397 AC_CHECK_LIB(MidiShare, MidiCountEvs,
398 have_midishare=1,
399 have_midishare=0
400 )
401 ,
402 have_midishare=0
403 )
404 if test "$have_midishare" = "1"; then
405 have_midi_input_driver="true"
406 fi
407 else
408 echo "MidiShare support disabled by configure script parameter"
409 fi
410 AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
411 AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
412 config_have_midishare="no"
413 if test $have_midishare = "1"; then
414 config_have_midishare="yes"
415 fi
416
417 # CoreMIDI (OS X)
418 AC_ARG_ENABLE(coremidi-driver,
419 [ --disable-coremidi-driver
420 Disable support for the Apple CoreMIDI system.],
421 [config_coremidi_driver="$enableval"],
422 [config_coremidi_driver="yes"]
423 )
424 have_coremidi=0
425 if test "$config_coremidi_driver" = "yes"; then
426 AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
427 have_coremidi=1,
428 have_coremidi=0
429 )
430 if test "$have_coremidi" = "1"; then
431 have_midi_input_driver="true"
432 fi
433 else
434 echo "CoreMIDI support disabled by configure script parameter"
435 fi
436 AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
437 AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
438 config_have_coremidi="no"
439 if test $have_coremidi = "1"; then
440 config_have_coremidi="yes"
441 fi
442
443 # CoreAudio (OS X)
444 AC_ARG_ENABLE(coreaudio-driver,
445 [ --disable-coreaudio-driver
446 Disable support for the Apple CoreAudio system.],
447 [config_coreaudio_driver="$enableval"],
448 [config_coreaudio_driver="yes"]
449 )
450 have_coreaudio=0
451 if test "$config_coreaudio_driver" = "yes"; then
452 AC_CHECK_HEADER(CoreAudio/CoreAudio.h,
453 have_coreaudio=1,
454 have_coreaudio=0
455 )
456 if test "$have_coreaudio" = "1"; then
457 have_audio_output_driver="true"
458 fi
459 else
460 echo "CoreAudio support disabled by configure script parameter"
461 fi
462 AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1")
463 AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.])
464 config_have_coreaudio="no"
465 if test $have_coreaudio = "1"; then
466 config_have_coreaudio="yes"
467 fi
468
469 # MME MIDI (Win32)
470 AC_ARG_ENABLE(mmemidi-driver,
471 [ --disable-mmemidi-driver
472 Disable support for the Windows MME MIDI system.],
473 [config_mmemidi_driver="$enableval"],
474 [config_mmemidi_driver="yes"]
475 )
476 have_mmemidi=0
477 if test "$config_mmemidi_driver" = "yes"; then
478 AC_CHECK_HEADERS(mmsystem.h,
479 have_mmemidi=1,
480 have_mmemidi=0
481 )
482 if test "$have_mmemidi" = "1"; then
483 have_midi_input_driver="true"
484 fi
485 else
486 echo "MME MIDI support disabled by configure script parameter"
487 fi
488 AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
489 AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
490 config_have_mme="no"
491 if test $have_mmemidi = "1"; then
492 config_have_mme="yes"
493 fi
494
495 # DSSI
496 AC_CHECK_HEADERS(dssi.h,
497 config_have_dssi="yes",
498 config_have_dssi="no")
499 AM_CONDITIONAL(HAVE_DSSI, test $config_have_dssi = "yes")
500
501 # LV2
502 PKG_CHECK_MODULES(LV2, lv2core, config_have_lv2="yes", config_have_lv2="no")
503 if test $config_have_lv2 = "no"; then
504 AC_CHECK_HEADER(lv2.h, config_have_lv2="yes", config_have_lv2="no")
505 fi
506 AM_CONDITIONAL(HAVE_LV2, test $config_have_lv2 = "yes")
507
508 # VST
509 AC_ARG_ENABLE(vstsdk-dir,
510 [ --enable-vstsdk-dir
511 Directory where the VST SDK is located.
512 This automatically enables the compilation
513 of the VST plugin.],
514 [VSTSDK_DIR="${enableval}"],
515 [VSTSDK_DIR=]
516 )
517 AC_SUBST(VSTSDK_DIR)
518 AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
519 config_have_vst="no"
520 if test "x$VSTSDK_DIR" != "x"; then
521 config_have_vst="yes"
522 fi
523
524 # AU
525 AC_CHECK_HEADERS(AudioUnit/AudioUnit.h,
526 config_have_au="yes",
527 config_have_au="no")
528 AM_CONDITIONAL(HAVE_AU, test $config_have_au = "yes")
529 AM_CONDITIONAL(HAVE_AUFLAGS, test "$AUFLAGS" != "")
530
531 if test $config_have_au = "yes" ; then
532 if test "x$DEVELOPER_EXTRAS_DIR" = "x" ; then
533 if test -d /Developer/Extras ; then
534 DEVELOPER_EXTRAS_DIR=/Developer/Extras
535 else
536 DEVELOPER_EXTRAS_DIR=/Developer/Examples
537 fi
538 fi
539 AC_SUBST(DEVELOPER_EXTRAS_DIR)
540 fi
541
542 # have we found at least one MIDI input and one audio output driver ?
543 if test "$have_midi_input_driver" = "false"; then
544 echo "No supported MIDI input system found!"
545 echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
546 echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
547 echo "If you think you have one of those available on your system, make sure you"
548 echo "also have the respective development (header) files installed."
549 exit -1;
550 fi
551 if test "$have_audio_output_driver" = "false"; then
552 echo "No supported audio output system found!"
553 echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
554 echo "driver at the moment!"
555 exit -1;
556 fi
557
558
559
560 ###########################################################################
561 # Checks for various DLL libraries
562
563 # Check presence of libgig
564 libgig_version="3.3.0"
565 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
566 if test "$HAVE_GIG" = "false"; then
567 echo "Required libgig version not found!"
568 echo "You need to have libgig version ${libgig_version} installed!"
569 exit -1;
570 else
571 echo "yes, found libgig $libgig_version"
572 fi
573 AC_SUBST(GIG_CFLAGS)
574 AC_SUBST(GIG_LIBS)
575
576 # SF2 Engine (requires libgig)
577 AC_ARG_ENABLE(sf2-engine,
578 [ --disable-sf2-engine
579 Disable compilation of the SF2 engine.
580 You need to have libgig installed.],
581 [config_sf2_engine="$enableval"],
582 [config_sf2_engine="yes"]
583 )
584 HAVE_SF2=0;
585 if test "$config_sf2_engine" = "yes"; then
586 HAVE_SF2=1
587 else
588 echo "SF2 engine disabled by configure script parameter"
589 fi
590 AM_CONDITIONAL(HAVE_SF2, test $HAVE_SF2 = 1)
591 AC_DEFINE_UNQUOTED(HAVE_SF2,$HAVE_SF2,[Define to 1 if you want SF2 engine and have libsf2 installed.])
592 config_have_sf2="no"
593 if test $HAVE_SF2 = "1"; then
594 config_have_sf2="yes"
595 fi
596
597 # Check presence of libsndfile
598 libsndfile_version="1.0"
599 PKG_CHECK_MODULES(SNDFILE, sndfile >= $libsndfile_version, HAVE_SNDFILE=true, HAVE_SNDFILE=false)
600 if test "$HAVE_SNDFILE" = "false"; then
601 echo "Required libsndfile version not found!"
602 echo "You need to have libsndfile version ${libsndfile_version} installed!"
603 exit -1;
604 else
605 echo "yes, found libsndfile $libsndfile_version"
606 fi
607 AC_SUBST(SNDFILE_CFLAGS)
608 AC_SUBST(SNDFILE_LIBS)
609
610 # Check for Vorbis support in libsndfile
611 linuxsampler_save_CFLAGS=$CFLAGS
612 CFLAGS="$SNDFILE_CFLAGS $CFLAGS"
613 AC_CHECK_DECLS([SF_FORMAT_VORBIS], [], [] ,[[#include <sndfile.h>]])
614
615 # Check for loop functionality in libsndfile
616 AC_CHECK_MEMBERS([SF_INSTRUMENT.loops],,
617 [AC_MSG_WARN([Your version of libsndfile does not support
618 reading of loop information. LinuxSampler will not be able to
619 extract loop information from sample files.])],
620 [#include <sndfile.h>])
621 CFLAGS=$linuxsampler_save_CFLAGS
622
623 # Instruments DB feature (requires SQLite 3.3)
624 AC_ARG_ENABLE(instruments-db,
625 [ --disable-instruments-db
626 Disable compilation of the sampler's instruments
627 database feature. You need to have SQLite 3.3
628 or younger installed for this feature.],
629 [config_instruments_db="$enableval"],
630 [config_instruments_db="yes"]
631 )
632 HAVE_SQLITE3=0;
633 if test "$config_instruments_db" = "yes"; then
634 # Check presence of sqlite3
635 sqlite_version="3.3"
636 PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
637 AC_SUBST(SQLITE3_LIBS)
638 AC_SUBST(SQLITE3_CFLAGS)
639 if test $HAVE_SQLITE3 = false; then
640 HAVE_SQLITE3=0
641 config_instruments_db="no"
642 echo "*** Required sqlite version not found!"
643 echo "*** You need to have sqlite version ${sqlite_version} or higher"
644 echo "*** for instruments database support to be enabled."
645 echo "*** Support for instruments DB will be disabled!"
646 else
647 HAVE_SQLITE3=1
648 fi
649 else
650 echo "Instruments DB feature disabled by configure script parameter"
651 fi
652 AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
653 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
654
655
656
657 ###########################################################################
658 # Handle Configuration Options
659
660 # TODO: should we use AC_ARG_VAR(variable, description) instead?
661
662 AC_ARG_ENABLE(asm,
663 [ --disable-asm
664 Enable hand-crafted assembly optimizations
665 (default=on). LinuxSampler provides CPU specific
666 assembly optimizations. This is currently limited
667 to just enter a fast (denormal) FPU mode on x86
668 platforms. There are currently no synthesis core
669 assembly optimizations anymore since LS 0.4.0],
670 [config_asm="$enableval"],
671 [config_asm="yes"]
672 )
673 if test "$config_asm" = "yes"; then
674 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
675 fi
676
677 AC_ARG_ENABLE(dev-mode,
678 [ --enable-dev-mode
679 Enable development mode (default=off). In that mode
680 we do some extra sanity checks here and there.
681 This helps to spot possible problems, but reduces
682 efficiency a bit],
683 [config_dev_mode="$enableval"],
684 [config_dev_mode="no"]
685 )
686 if test "$config_dev_mode" = "yes"; then
687 AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
688 fi
689
690 AC_ARG_ENABLE(debug-level,
691 [ --enable-debug-level
692 Specify verbosity of console messages (default=1).
693 The higher the value, the higher will be verbosity.
694 A value of 0 means no console output at all.
695 There's not really an upper limit but the usual
696 level of all messages is currently somewhere less
697 than 10.],
698 [config_debug_level="${enableval}"],
699 [config_debug_level="1"]
700 )
701 AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
702
703 AC_ARG_ENABLE(rt-exceptions,
704 [ --enable-rt-exceptions
705 Enable exceptions in the realtime thread
706 (default=no). If this is enabled, exceptions will
707 be thrown on critical errors in the realtime
708 context as well. Otherwise if disabled
709 segmentation faults will be forced by the
710 application on critical errors.],
711 [config_rt_exceptions="$enableval"],
712 [config_rt_exceptions="no"]
713 )
714 if test "$config_rt_exceptions" = "yes"; then
715 AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
716 fi
717
718 AC_ARG_ENABLE(pthread-testcancel,
719 [ --enable-pthread-testcancel
720 Enable pthread_testcancel() calls and avoid asynchronous
721 cancel of pthreads (default=no).],
722 [config_pthread_testcancel="$enableval"],
723 [config_pthread_testcancel="no"]
724 )
725 if test "$config_pthread_testcancel" = "yes"; then
726 AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
727 fi
728
729 AC_ARG_ENABLE(preload-samples,
730 [ --enable-preload-samples
731 Due to seeking and latency issues with hard drives
732 we have to cache a small part of samples' head in
733 RAM (default=32768). The higher this value the
734 more memory will be occupied for each sample, but
735 the safer this will be in regards of possible
736 droputs. A 'good' value depends on the running
737 system and usage dependant factors.],
738 [config_preload_samples="${enableval}"],
739 [config_preload_samples="32768"]
740 )
741 AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
742
743 AC_ARG_ENABLE(max-pitch,
744 [ --enable-max-pitch
745 Specify the maximum allowed pitch value in octaves
746 (default=4). To lower memory usage you might want
747 set a smaller value.],
748 [config_max_pitch="${enableval}"],
749 [config_max_pitch="4"]
750 )
751 AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
752
753 AC_ARG_ENABLE(max-events,
754 [ --enable-max-events
755 Specify the maximum allowed amount of events to be
756 processed per fragment (default=1024).],
757 [config_max_events="${enableval}"],
758 [config_max_events="1024"]
759 )
760 AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
761
762 AC_ARG_ENABLE(eg-bottom,
763 [ --enable-eg-bottom
764 Bottom limit of envelope generators
765 (default=0.001). Certain kinds of curve types like
766 exponential curves converge against 0 but never
767 reach 0. So we have to define a certain low value
768 after which we should consider all smaller values
769 to be 'almost zero'. The smaller this value, the
770 longer will voices survive in EG's release stage
771 and thus waste voices. If this value is too high
772 will cause click sounds though.],
773 [config_eg_bottom="${enableval}"],
774 [config_eg_bottom="0.001"]
775 )
776 AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
777
778 AC_ARG_ENABLE(eg-min-release-time,
779 [ --enable-eg-min-release-time
780 Specify the lowest allowed release time in seconds
781 (default=0.0025). This value will also be used to
782 ramp down voices on voice stealing. This value
783 should always be less than the period time of the
784 used audio driver, as in case of voice stealing
785 the killed voice needs to be completely ramped
786 down in the same fragment.],
787 [config_eg_min_release_time="${enableval}"],
788 [config_eg_min_release_time="0.0025"]
789 )
790 AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
791
792 AC_ARG_ENABLE(refill-streams,
793 [ --enable-refill-streams
794 Number of streams that should be refilled in each
795 disk thread cycle (default=4).],
796 [config_refill_streams="${enableval}"],
797 [config_refill_streams="4"]
798 )
799 AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
800
801 AC_ARG_ENABLE(stream-min-refill,
802 [ --enable-stream-min-refill
803 Minimum refill size for disk streams (default=1024).
804 The disk thread will go to sleep for a while if no
805 stream had to be refilled more than this value in
806 a disk thread cycle.],
807 [config_stream_min_refill="${enableval}"],
808 [config_stream_min_refill="1024"]
809 )
810 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
811
812 AC_ARG_ENABLE(stream-max-refill,
813 [ --enable-stream-max-refill
814 Maximum refill size for disk streams
815 (default=65536). The disk thread will refill
816 each stream only by a size of this value per
817 disk thread cycle.],
818 [config_stream_max_refill="${enableval}"],
819 [config_stream_max_refill="65536"]
820 )
821 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
822
823 AC_ARG_ENABLE(stream-size,
824 [ --enable-stream-size
825 Size of each stream's ring buffer in sample points
826 (default=262144).],
827 [config_stream_size="${enableval}"],
828 [config_stream_size="262144"]
829 )
830 AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
831
832 AC_ARG_ENABLE(max-streams,
833 [ --enable-max-streams
834 Initial maximum amount of disk streams
835 (default=90). This value can be changed at
836 runtime. It should always be higher than the
837 maximum amount of voices.],
838 [config_max_streams="${enableval}"],
839 [config_max_streams="90"]
840 )
841 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
842
843 AC_ARG_ENABLE(max-voices,
844 [ --enable-max-voices
845 Initial maximum amount of voices (default=64).
846 This value can be changed at runtime. It should
847 always be lower than the maximum amount of disk
848 streams.],
849 [config_max_voices="${enableval}"],
850 [config_max_voices="64"]
851 )
852 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
853
854 AC_ARG_ENABLE(subfragment-size,
855 [ --enable-subfragment-size
856 Every audio fragment will be splitted into
857 subfragments. Where each subfragment renders
858 audio with constant synthesis parameters. This is
859 done for efficiency reasons. This parameter
860 defines the default size of a subfragment in
861 sample points. A large value means less CPU time
862 whereas a low value means better audio quality
863 (default=32).],
864 [config_subfragment_size="${enableval}"],
865 [config_subfragment_size="32"]
866 )
867 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
868
869 AC_ARG_ENABLE(global-attenuation-default,
870 [ --enable-global-attenuation-default
871 To prevent clipping all samples will be lowered
872 in amplitude by this given default factor (can
873 be overridden at runtime).
874 (default=0.35)],
875 [config_global_attenuation_default="${enableval}"],
876 [config_global_attenuation_default="0.35"]
877 )
878 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
879
880 AC_ARG_ENABLE(voice-steal-algo,
881 [ --enable-voice-steal-algo
882 Voice stealing algorithm to be used. Currently
883 available options:
884 none:
885 Disable voice stealing completely.
886 oldestvoiceonkey (default):
887 Try to kill a voice on the same key first,
888 if no success, proceed with the oldest key.
889 oldestkey:
890 Try to kill a voice from the oldest active
891 key.],
892 [ if test ! "(" "${enableval}" = "none" \
893 -o "${enableval}" = "oldestvoiceonkey" \
894 -o "${enableval}" = "oldestkey" ")" ; then
895 AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
896 else
897 config_voice_steal_algo="${enableval}"
898 fi
899 ],
900 [config_voice_steal_algo="oldestvoiceonkey"]
901 )
902 AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
903
904 AC_ARG_ENABLE(sysex-buffer-size,
905 [ --enable-sysex-buffer-size
906 System Exclusive Message buffer size in kB
907 (default=2048).],
908 [config_sysex_buffer_size="${enableval}"],
909 [config_sysex_buffer_size="2048"]
910 )
911 AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
912
913 AC_ARG_ENABLE(force-filter,
914 [ --enable-force-filter
915 If enabled will force filter to be used even if
916 no usage was define in instrument patch files.
917 (default=no).],
918 [config_force_filter="$enableval"],
919 [config_force_filter="no"]
920 )
921 if test "$config_force_filter" = "yes"; then
922 AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
923 fi
924
925 AC_ARG_ENABLE(filter-cutoff-min,
926 [ --enable-filter-cutoff-min
927 Minimum filter cutoff frequency in Hz
928 (default=100.0).],
929 [config_filter_cutoff_min="${enableval}"],
930 [config_filter_cutoff_min="100.0"]
931 )
932 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
933
934 AC_ARG_ENABLE(filter-cutoff-max,
935 [ --enable-filter-cutoff-max
936 Maximum filter cutoff frequency in Hz
937 (default=10000.0).],
938 [config_filter_cutoff_max="${enableval}"],
939 [config_filter_cutoff_max="10000.0"]
940 )
941 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
942
943 AC_ARG_ENABLE(override-cutoff-ctrl,
944 [ --enable-override-cutoff-ctrl
945 Override filter cutoff MIDI controller (default=no).
946 Note: you have to define the MIDI controller number
947 here, it's not a boolean parameter type! If this
948 option is used, controller number given by
949 instrument patch will be ignored and instead this
950 supplied value will be used.],
951 [config_override_cutoff_ctrl="${enableval}"],
952 [config_override_cutoff_ctrl="no"]
953 )
954 if test ! "$config_override_cutoff_ctrl" = "no"; then
955 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
956 fi
957
958 AC_ARG_ENABLE(override-resonance-ctrl,
959 [ --enable-override-resonance-ctrl
960 Override filter resonance MIDI controller
961 (default=no). Note: you have to define the MIDI
962 controller number here, it's not a boolean
963 parameter type! If this option is used, controller
964 number given by instrument patch will be ignored
965 and instead this supplied value will be used.],
966 [config_override_resonance_ctrl="${enableval}"],
967 [config_override_resonance_ctrl="no"]
968 )
969 if test ! "$config_override_resonance_ctrl" = "no"; then
970 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
971 fi
972
973 AC_ARG_ENABLE(override-filter-type,
974 [ --enable-override-filter-type
975 Override filter type (default=no). Options:
976 hp: for highpass
977 bp: for bandpass
978 br: for bandreject
979 lp: for lowpass
980 lpt: for lowpass turbo],
981 [ if test "${enableval}" = "hp" ; then
982 config_override_filter_type="::gig::vcf_type_highpass"
983 elif test "${enableval}" = "bp" ; then
984 config_override_filter_type="::gig::vcf_type_bandpass"
985 elif test "${enableval}" = "br" ; then
986 config_override_filter_type="::gig::vcf_type_bandreject"
987 elif test "${enableval}" = "lp" ; then
988 config_override_filter_type="::gig::vcf_type_lowpass"
989 elif test "${enableval}" = "lpt" ; then
990 config_override_filter_type="::gig::vcf_type_lowpassturbo"
991 elif test ! "${enableval}" = "no"; then
992 AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
993 fi
994 ],
995 [config_override_filter_type="no"]
996 )
997 if test ! "$config_override_filter_type" = "no"; then
998 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
999 fi
1000
1001 AC_ARG_ENABLE(gs-checksum,
1002 [ --enable-gs-checksum
1003 Enable Roland General Synth SysEx checksum check
1004 (default=no). If this is enabled, all GS SysEx
1005 messages which do not provide a correct checksum
1006 will be ignored. This is disabled by default as
1007 not all devices honor GS checksums.],
1008 [config_assert_gs_sysex_checksum="$enableval"],
1009 [config_assert_gs_sysex_checksum="no"]
1010 )
1011 if test "config_assert_gs_sysex_checksum" = "yes"; then
1012 AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
1013 fi
1014
1015 AC_ARG_ENABLE(portamento-time-min,
1016 [ --enable-portamento-time-min
1017 Minimum Portamento time in seconds
1018 (default=0.1).],
1019 [config_portamento_time_min="${enableval}"],
1020 [config_portamento_time_min="0.1"]
1021 )
1022 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
1023
1024 AC_ARG_ENABLE(portamento-time-max,
1025 [ --enable-portamento-time-max
1026 Maximum Portamento time in seconds
1027 (default=32).],
1028 [config_portamento_time_max="${enableval}"],
1029 [config_portamento_time_max="32"]
1030 )
1031 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
1032
1033 AC_ARG_ENABLE(portamento-time-default,
1034 [ --enable-portamento-time-default
1035 Default Portamento time in seconds
1036 (default=1).],
1037 [config_portamento_time_default="${enableval}"],
1038 [config_portamento_time_default="1"]
1039 )
1040 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
1041
1042 AC_ARG_ENABLE(signed-triang-algo,
1043 [ --enable-signed-triang-algo
1044 Signed triangular wave algorithm to be used (e.g. for LFOs).
1045 Currently available options:
1046 intmath:
1047 Uses integer math without any branch will then be
1048 converted to floating point value for each sample point.
1049 This int->float conversion might hurt on some systems.
1050 intmathabs:
1051 Similar to intmath but uses abs() function.
1052 Depending on compiler and platrofm this could
1053 perform better than integer math as it avoids
1054 an extra integer multiply instruction.
1055 diharmonic:
1056 The triangular wave will be approximated by adding two
1057 sinusoidials. This solution might especially hurt on
1058 systems with weak floating point unit.
1059 benchmark (default):
1060 This is not an algorithm. Use this option if the
1061 appropriate algorithm should be automatically
1062 chosen by the configure script by performing a
1063 benchmark between the algorithms mentioned above.
1064 This will NOT work for cross compilation!],
1065 [ if test ! "(" "${enableval}" = "intmath" \
1066 -o "${enableval}" = "intmathabs" \
1067 -o "${enableval}" = "diharmonic" ")" ; then
1068 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
1069 else
1070 config_signed_triang_algo="${enableval}"
1071 fi
1072 ],
1073 [config_signed_triang_algo="benchmark"]
1074 )
1075
1076 AC_ARG_ENABLE(unsigned-triang-algo,
1077 [ --enable-unsigned-triang-algo
1078 Unsigned triangular wave algorithm to be used (e.g. for LFOs).
1079 Currently available options:
1080 intmath:
1081 Uses integer math without any branch will then be
1082 converted to floating point value for each sample point.
1083 This int->float conversion might hurt on some systems.
1084 intmathabs:
1085 Similar to intmath but uses abs() function.
1086 Depending on compiler and platrofm this could
1087 perform better than integer math as it avoids
1088 an extra integer multiply instruction.
1089 diharmonic:
1090 The triangular wave will be approximated by adding two
1091 sinusoidials. This solution might especially hurt on
1092 systems with weak floating point unit.
1093 benchmark (default):
1094 This is not an algorithm. Use this option if the
1095 appropriate algorithm should be automatically
1096 chosen by the configure script by performing a
1097 benchmark between the algorithms mentioned above.
1098 This will NOT work for cross compilation!],
1099 [ if test ! "(" "${enableval}" = "intmath" \
1100 -o "${enableval}" = "intmathabs" \
1101 -o "${enableval}" = "diharmonic" ")" ; then
1102 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
1103 else
1104 config_unsigned_triang_algo="${enableval}"
1105 fi
1106 ],
1107 [config_unsigned_triang_algo="benchmark"]
1108 )
1109
1110 AC_ARG_ENABLE(process-muted-channels,
1111 [ --enable-process-muted-channels
1112 Enable processing of muted channels (default=no).
1113 In that mode all MIDI events in the muted channels
1114 will be processed. This will provide information
1115 about the active voices in the muted channels and
1116 will not discard notes, triggered in mute mode,
1117 when the channel is unmuted. But also will reduce
1118 the efficiency.],
1119 [config_process_muted_channels="$enableval"],
1120 [config_process_muted_channels="no"]
1121 )
1122 if test "$config_process_muted_channels" = "yes"; then
1123 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
1124 fi
1125
1126 AC_ARG_ENABLE(process-all-notes-off,
1127 [ --disable-process-all-notes-off
1128 Disable interpretation of All-Notes-Off MIDI
1129 messages (default=on). By default LS will release
1130 all voices whenever it receives an All-Notes-Off
1131 MIDI message. You can disable this behavior, so
1132 that LS simply ignores such messages.],
1133 [config_process_all_notes_off="$enableval"],
1134 [config_process_all_notes_off="yes"]
1135 )
1136 if test "$config_process_all_notes_off" = "yes"; then
1137 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
1138 fi
1139
1140 AC_ARG_ENABLE(interpolate-volume,
1141 [ --disable-interpolate-volume
1142 Disable interpolation of volume modulation
1143 (default=on). With this enabled, the volume changes
1144 generated by for example the envelope generator
1145 will be smoother, minimizing the risk for audio
1146 clicks. Disable it to reduce CPU usage.],
1147 [config_interpolate_volume="$enableval"],
1148 [config_interpolate_volume="yes"]
1149 )
1150 if test "$config_interpolate_volume" = "yes"; then
1151 AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
1152 fi
1153
1154 AC_ARG_ENABLE(master-volume-sysex-by-port,
1155 [ --enable-master-volume-sysex-by-port
1156 Whether global volume sysex message should be
1157 applied globally to the whole sampler or only to
1158 the sampler channels connected to the same MIDI
1159 input port on which the sysex message arrived on.
1160 By default global volume sysex messages apply
1161 globally to the whole sampler, since many MIDI
1162 devices behave that way.],
1163 [config_master_volume_sysex_by_port="$enableval"],
1164 [config_master_volume_sysex_by_port="no"]
1165 )
1166 if test "$config_master_volume_sysex_by_port" = "yes"; then
1167 AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
1168 fi
1169
1170 AC_ARG_ENABLE(plugin-dir,
1171 [ --enable-plugin-dir
1172 Directory where the sampler shall look for potential plugins,
1173 that is 3rd party shared libraries that should be loaded by
1174 the sampler on startup. By default the sampler will search
1175 for plugins in the subdirectory "plugins" below its own
1176 library directory.
1177 (i.e. /usr/local/lib/linuxsampler/plugins)],
1178 [config_plugin_dir="${enableval}"],
1179 [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1180 )
1181 AC_SUBST(config_plugin_dir)
1182
1183 AC_ARG_ENABLE(default-instruments-db-location,
1184 [ --enable-default-instruments-db-location
1185 Only when instruments DB feature is enabled: file name
1186 which shall be taken as default location of the
1187 instruments DB file. This location can still be
1188 overridden at runtime with a command line switch.
1189 (default: /var/lib/linuxsampler/instruments.db)],
1190 [config_default_instruments_db_file="${enableval}"],
1191 [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1192 )
1193 AC_DEFINE_UNQUOTED(
1194 CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1195 "$config_default_instruments_db_file",
1196 [Only when instruments DB feature is enabled: default location of the DB file.]
1197 )
1198 AC_SUBST(config_default_instruments_db_file)
1199
1200
1201 ###########################################################################
1202 # Automatic Benchmarks (to detect the best algorithms for the system)
1203
1204 AC_LANG_SAVE
1205
1206 if test "$config_signed_triang_algo" = "benchmark"; then
1207 echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1208 AC_LANG_CPLUSPLUS
1209 AC_TRY_RUN([
1210 #define SIGNED 1
1211 #define SILENT 1
1212 #include "${srcdir}/benchmarks/triang.cpp"
1213 ],
1214 triang_signed=0,
1215 triang_signed=$?,
1216 triang_signed=0
1217 )
1218 if test "$triang_signed" = "2"; then
1219 config_signed_triang_algo="intmath"
1220 echo "integer math"
1221 elif test "$triang_signed" = "3"; then
1222 config_signed_triang_algo="diharmonic"
1223 echo "di harmonics"
1224 elif test "$triang_signed" = "5"; then
1225 config_signed_triang_algo="intmathabs"
1226 echo "integer math using abs()"
1227 else
1228 echo "Benchmark of signed triangular wave algorithms failed!"
1229 echo "Maybe you are doing cross compilation? In that case you have to select"
1230 echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1231 echo "Call './configure --help' for further information or read configure.in."
1232 exit -1;
1233 fi
1234 else
1235 case "$config_signed_triang_algo" in
1236 intmath)
1237 triang_signed=2 ;;
1238 diharmonic)
1239 triang_signed=3 ;;
1240 intmathabs)
1241 triang_signed=5 ;;
1242 esac
1243 fi
1244 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1245
1246 if test "$config_unsigned_triang_algo" = "benchmark"; then
1247 echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1248 AC_LANG_CPLUSPLUS
1249 AC_TRY_RUN([
1250 #define SIGNED 0
1251 #define SILENT 1
1252 #include "${srcdir}/benchmarks/triang.cpp"
1253 ],
1254 triang_unsigned=0,
1255 triang_unsigned=$?,
1256 triang_unsigned=0
1257 )
1258 if test "$triang_unsigned" = "2"; then
1259 config_unsigned_triang_algo="intmath"
1260 echo "integer math"
1261 elif test "$triang_unsigned" = "3"; then
1262 config_unsigned_triang_algo="diharmonic"
1263 echo "di harmonics"
1264 elif test "$triang_unsigned" = "5"; then
1265 config_unsigned_triang_algo="intmathabs"
1266 echo "integer math using abs()"
1267 else
1268 echo "Benchmark of unsigned triangular wave algorithms failed!"
1269 echo "Maybe you are doing cross compilation? In that case you have to select"
1270 echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1271 echo "Call './configure --help' for further information or read configure.in."
1272 exit -1;
1273 fi
1274 else
1275 case "$config_unsigned_triang_algo" in
1276 intmath)
1277 triang_unsigned=2 ;;
1278 diharmonic)
1279 triang_unsigned=3 ;;
1280 intmathabs)
1281 triang_unsigned=5 ;;
1282 esac
1283 fi
1284 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1285
1286 AC_LANG_RESTORE
1287
1288
1289 ###########################################################################
1290 # Create Build Files
1291
1292 AM_CONFIG_HEADER(config.h)
1293 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1294
1295 AC_LANG_CPLUSPLUS
1296
1297 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1298 # this, the dlfcn.h check in am_prog_libtool may fail.
1299 AC_CHECK_HEADER(stdlib.h)
1300
1301 AC_OUTPUT( \
1302 Makefile \
1303 man/Makefile \
1304 man/linuxsampler.1 \
1305 src/Makefile \
1306 src/db/Makefile \
1307 src/network/Makefile \
1308 src/engines/Makefile \
1309 src/engines/gig/Makefile \
1310 src/engines/sf2/Makefile \
1311 src/engines/sfz/Makefile \
1312 src/engines/common/Makefile \
1313 src/effects/Makefile \
1314 src/common/Makefile \
1315 src/testcases/Makefile \
1316 src/drivers/Makefile \
1317 src/drivers/audio/Makefile \
1318 src/drivers/midi/Makefile \
1319 src/plugins/Makefile \
1320 src/hostplugins/Makefile \
1321 src/hostplugins/dssi/Makefile \
1322 src/hostplugins/lv2/Makefile \
1323 src/hostplugins/vst/Makefile \
1324 src/hostplugins/au/Makefile \
1325 linuxsampler.spec \
1326 debian/Makefile \
1327 Artwork/Makefile \
1328 scripts/Makefile \
1329 osx/Makefile \
1330 osx/linuxsampler.xcodeproj/Makefile \
1331 Documentation/Makefile \
1332 Documentation/Engines/Makefile \
1333 Documentation/Engines/gig/Makefile \
1334 linuxsampler.pc \
1335 Doxyfile \
1336 )
1337
1338 # resolve all nested variables in '${config_plugin_dir}'
1339 # (merely for providing a human readable summary below)
1340 while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1341 config_plugin_dir=`eval echo ${config_plugin_dir}`
1342 done
1343
1344
1345 ###########################################################################
1346 # Output All Configuration Options
1347
1348 echo ""
1349 echo "#####################################################################"
1350 echo "# LinuxSampler Configuration #"
1351 echo "#-------------------------------------------------------------------#"
1352 echo "# Release Version: ${LINUXSAMPLER_RELEASE_MAJOR}.${LINUXSAMPLER_RELEASE_MINOR}.${LINUXSAMPLER_RELEASE_BUILD}"
1353 echo "# LSCP Version: ${LSCP_RELEASE_MAJOR}.${LSCP_RELEASE_MINOR}"
1354 echo "#-------------------------------------------------------------------"
1355 echo "# Assembly Optimizations: ${config_asm}"
1356 echo "# Development Mode: ${config_dev_mode}"
1357 echo "# Debug Level: ${config_debug_level}"
1358 echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1359 echo "# Preload Samples: ${config_preload_samples}"
1360 echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1361 echo "# Maximum Events: ${config_max_events}"
1362 echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1363 echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1364 echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1365 echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1366 echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1367 echo "# Stream Size: ${config_stream_size}"
1368 echo "# Default Maximum Disk Streams: ${config_max_streams}"
1369 echo "# Default Maximum Voices: ${config_max_voices}"
1370 echo "# Default Subfragment Size: ${config_subfragment_size}"
1371 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1372 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1373 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1374 echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1375 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1376 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1377 echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1378 echo "# Default Portamento Time: ${config_portamento_time_default} s"
1379 echo "# Force Filter Usage: ${config_force_filter}"
1380 echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1381 echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1382 echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1383 echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1384 echo "# Override Filter Type: ${config_override_filter_type}"
1385 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1386 echo "# Process Muted Channels: ${config_process_muted_channels}"
1387 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1388 echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
1389 echo "# Interpolate Volume: ${config_interpolate_volume}"
1390 echo "# Instruments database support: ${config_instruments_db}"
1391 if test "$config_instruments_db" = "yes"; then
1392 echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1393 fi
1394 echo "# Plugin Path: ${config_plugin_dir}"
1395 echo "#-------------------------------------------------------------------"
1396 echo "# MIDI Input Drivers:"
1397 echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack_midi}, CoreMIDI: ${config_have_coremidi}, MME: ${config_have_mme}, MidiShare: ${config_have_midishare}"
1398 echo "#-------------------------------------------------------------------"
1399 echo "# Audio Output Drivers:"
1400 echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack}, ARTS: ${config_have_arts}, CoreAudio: ${config_have_coreaudio}, ASIO: ${config_have_asio}"
1401 echo "#-------------------------------------------------------------------"
1402 echo "# Sampler Engines:"
1403 echo "# GIG: yes, SF2: ${config_have_sf2}, SFZ: yes"
1404 echo "#-------------------------------------------------------------------"
1405 echo "# Effect plugin systems for internal effects:"
1406 echo "# LADSPA: yes"
1407 echo "#-------------------------------------------------------------------"
1408 echo "# Building sampler as plugin for following host standards:"
1409 echo "# DSSI: ${config_have_dssi}, LV2: ${config_have_lv2}, VST: ${config_have_vst}, AU: ${config_have_au}"
1410 echo "#-------------------------------------------------------------------#"
1411 echo "# Read './configure --help' or file 'configure.in' for details. #"
1412 echo "#####################################################################"
1413 echo ""
1414 echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1415 echo ""

  ViewVC Help
Powered by ViewVC