/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Contents of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 2197 - (show annotations) (download)
Sat Jul 2 09:55:42 2011 UTC (12 years, 8 months ago) by persson
Original Path: linuxsampler/trunk/configure.in
File size: 57524 byte(s)
* AU: changed number of output channels from one stereo to 16 stereo
* VST: made it possible to build the VST plugin for Mac
* AU: link AU plugin dynamically if --disable-shared isn't specified
* minor Makefile fix for building lscpparser when build and source
  directories are separate

1 AC_INIT(configure.in)
2
3 #------------------------------------------------------------------------------------
4 # LinuxSampler's / liblinuxsampler's "official" release version:
5
6 LINUXSAMPLER_RELEASE_MAJOR=1
7 LINUXSAMPLER_RELEASE_MINOR=0
8 LINUXSAMPLER_RELEASE_BUILD=0.cvs10
9
10 #------------------------------------------------------------------------------------
11 # The following is the libtool / shared library version. This doesn't have to
12 # do anything with the release version. It MUST conform to the following rules:
13 #
14 # 1. Start with version information of `0:0:0' for each libtool library.
15 # 2. Update the version information only immediately before a public release of
16 # your software. More frequent updates are unnecessary, and only guarantee
17 # that the current interface number gets larger faster.
18 # 3. If the library source code has changed at all since the last update, then
19 # increment revision (`c:r:a' becomes `c:r+1:a').
20 # 4. If any interfaces have been added, removed, or changed since the last update,
21 # increment current, and set revision to 0.
22 # 5. If any interfaces have been added since the last public release, then increment
23 # age.
24 # 6. If any interfaces have been removed since the last public release, then set age
25 # to 0.
26
27 LIBLINUXSAMPLER_LT_CURRENT=3
28 LIBLINUXSAMPLER_LT_REVISION=0
29 LIBLINUXSAMPLER_LT_AGE=0
30 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31
32 #------------------------------------------------------------------------------------
33 # the LSCP specification version this LinuSampler release complies with:
34
35 LSCP_RELEASE_MAJOR=1
36 LSCP_RELEASE_MINOR=5
37
38 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40
41 AC_PROG_CXX
42 AC_LIBTOOL_WIN32_DLL
43 AM_PROG_LIBTOOL
44
45 AC_SUBST(SHLIB_VERSION_ARG)
46 AC_SUBST(SHARED_VERSION_INFO)
47
48 AC_C_BIGENDIAN
49 AC_CANONICAL_HOST
50
51 PKG_PROG_PKG_CONFIG
52
53 ###########################################################################
54 # General Checks
55
56 AM_CONDITIONAL(CROSS_COMPILING, test $cross_compiling = yes)
57
58 AC_MSG_CHECKING([whether x86 architecture])
59 def_arch_x86=0
60 case $host_cpu in
61 "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
62 echo "yes"
63 def_arch_x86=1;;
64 *)
65 echo "no";;
66 esac
67 AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
68
69 # determine the right gcc switch for CPU specific optimizations
70 # (only if the user did not provide one)
71 CXX_CPU_SWITCH=
72 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
73 if test "$def_arch_x86" = 1 -a "$host_cpu" != "x86_64"; then
74 CXX_CPU_SWITCH="-march=$host_cpu"
75 elif test "$target_cpu" = "ppc"; then
76 CXX_CPU_SWITCH="-arch=$host_cpu"
77 fi
78 fi
79 AC_SUBST([CXX_CPU_SWITCH])
80
81 mac=no
82 linux=no
83 case "$host" in
84 *-*-darwin*)
85 mac=yes
86 ;;
87 *-*-linux*)
88 linux=yes
89 ;;
90 esac
91 AM_CONDITIONAL(LINUX, test "$linux" = yes)
92 AM_CONDITIONAL(MAC, test "$mac" = yes)
93
94 # check if we're on MS Windows
95 AC_CHECK_HEADERS(
96 mmsystem.h,
97 have_windows=1,
98 have_windows=0,
99 [#include <windef.h>]
100 )
101 AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
102
103 AC_MSG_CHECKING([whether UNIX98 compatible])
104 AC_LANG_SAVE
105 AC_LANG_C
106 AC_TRY_RUN([
107 #ifndef _GNU_SOURCE
108 #define _GNU_SOURCE 1
109 #endif
110 #include <features.h>
111 void main(void) {
112 #if _XOPEN_SOURCE >= 500
113 exit(0); /* UNIX98 compatible */
114 #else
115 exit(-1); /* not UNIX98 compatible */
116 #endif
117 }
118 ],
119 have_unix98="yes",
120 have_unix98="no",
121 have_unix98="no"
122 )
123 AC_LANG_RESTORE
124 AC_MSG_RESULT([$have_unix98])
125 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
126 if test "x$HAVE_UNIX98" = "x"; then
127 echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
128 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
129 echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
130 echo "have a UNIX98 compatible system."
131 exit -1;
132 fi
133 fi
134
135 # check for <features.h>
136 AC_CHECK_HEADERS(features.h)
137
138 # test for POSIX thread library
139 m4_ifdef([m4_include(m4/pthread.m4)],,
140 [sinclude([m4/pthread.m4])])
141 ACX_PTHREAD
142 LIBS="$PTHREAD_LIBS $LIBS"
143 CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
144 CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
145 CC="$PTHREAD_CC"
146
147 # check for a bug in NPTL-enabled glibc
148 # (see Gentoo bug report #194076)
149 AC_ARG_ENABLE(nptl-bug-check,
150 [ --disable-nptl-bug-check
151 Disable check for a bug in certain NPTL-enabled
152 glibc versions that caused crashs.],
153 [config_check_nptl_bug="$enableval"],
154 [config_check_nptl_bug="yes"]
155 )
156 if test "$config_check_nptl_bug" = "yes"; then
157 m4_ifdef([m4_include(m4/nptl_bug.m4)],,
158 [sinclude([m4/nptl_bug.m4])])
159 ACX_NPTL_GLIBC_BUG([
160 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
161 echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
162 echo "probably crash due to this. Please report us the system you are"
163 echo "using and/or file a bug report to the bug tracking system of"
164 echo "your distribution."
165 echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
166 echo "well, you can try to circumvent this problem for now by setting"
167 echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
168 echo "should cause this test to pass."
169 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
170 AC_MSG_ERROR([possibly NPTL glibc bug detected])
171 ])
172 else
173 echo "NPTL glibc bug check disabled"
174 fi
175
176 # FIXME: this is actually a dependency of libgig, not of LS directly, why
177 # isn't it hidden by libgig?
178 AC_CHECK_HEADERS(uuid/uuid.h)
179 AC_SEARCH_LIBS(uuid_generate, uuid)
180
181
182
183 ###########################################################################
184 # Checks for available audio and MIDI systems / drivers
185 # (we throw an error if there's not at least one system for audio output and MIDI input available)
186
187 have_midi_input_driver="false"
188 have_audio_output_driver="false"
189
190 # ALSA
191 AC_ARG_ENABLE(alsa-driver,
192 [ --disable-alsa-driver
193 Disable support for the Advanced Linux Sound
194 Architecture (ALSA).],
195 [config_alsa_driver="$enableval"],
196 [config_alsa_driver="yes"]
197 )
198 have_alsa=0
199 if test "$config_alsa_driver" = "yes"; then
200 AC_CHECK_HEADER(alsa/asoundlib.h,
201 AC_CHECK_LIB(asound, main,
202 have_alsa=1
203 ,
204 have_alsa=0
205 )
206 ,
207 have_alsa=0
208 )
209 if test "$have_alsa" = "1"; then
210 have_midi_input_driver="true"
211 have_audio_output_driver="true";
212 fi
213
214 echo -n "checking Alsa version... "
215 AC_LANG_SAVE
216 AC_LANG_C
217 AC_TRY_RUN([
218 #include <alsa/asoundlib.h>
219 void main(void) {
220 /* ensure backward compatibility */
221 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
222 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
223 #endif
224 exit(SND_LIB_MAJOR);
225 }
226 ],
227 alsa_major=0,
228 alsa_major=$?,
229 alsa_major=0
230 )
231 AC_TRY_RUN([
232 #include <alsa/asoundlib.h>
233 void main(void) {
234 /* ensure backward compatibility */
235 #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
236 #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
237 #endif
238 exit(SND_LIB_MINOR);
239 }
240 ],
241 alsa_minor=0,
242 alsa_minor=$?,
243 alsa_minor=0
244 )
245 AC_TRY_RUN([
246 #include <alsa/asoundlib.h>
247 void main(void) {
248 /* ensure backward compatibility */
249 #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
250 #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
251 #endif
252 exit(SND_LIB_SUBMINOR);
253 }
254 ],
255 alsa_subminor=0,
256 alsa_subminor=$?,
257 alsa_subminor=0
258 )
259 AC_LANG_RESTORE
260 echo "$alsa_major.$alsa_minor.$alsa_subminor";
261 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
262 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
263 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
264 else
265 echo "ALSA support disabled by configure script parameter"
266 fi
267 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
268 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
269 config_have_alsa="no"
270 if test $have_alsa = "1"; then
271 config_have_alsa="yes"
272 fi
273
274 # JACK
275 AC_ARG_ENABLE(jack-driver,
276 [ --disable-jack-driver
277 Disable support for the Jack Audio Connection Kit
278 (JACK).],
279 [config_jack_driver="$enableval"],
280 [config_jack_driver="yes"]
281 )
282 have_jack=0
283 if test "$config_jack_driver" = "yes"; then
284 PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
285 if test $have_jack = "1"; then
286 AC_SUBST(JACK_LIBS)
287 AC_SUBST(JACK_CFLAGS)
288 linuxsampler_save_LIBS=$LIBS
289 LIBS="$JACK_LIBS $LIBS"
290 AC_CHECK_FUNCS(jack_client_name_size jack_client_open)
291 LIBS=$linuxsampler_save_LIBS
292 have_audio_output_driver="true";
293 fi
294 else
295 echo "JACK support disabled by configure script parameter"
296 fi
297 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
298 AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
299 config_have_jack="no"
300 if test $have_jack = "1"; then
301 config_have_jack="yes"
302 fi
303
304 # JACK MIDI
305 have_jack_midi=0
306 if test $have_jack = "1"; then
307 linuxsampler_save_CFLAGS=$CFLAGS
308 linuxsampler_save_LIBS=$LIBS
309 CFLAGS="$JACK_CFLAGS $CFLAGS"
310 LIBS="$JACK_LIBS $LIBS"
311 AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
312 if test $have_jack_midi = "1"; then
313 AC_CHECK_FUNCS(jack_midi_get_event_count)
314 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
315 jack_midi_clear_buffer(0, 0);
316 ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
317 [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
318 have_midi_input_driver="true"
319 fi
320 CFLAGS=$linuxsampler_save_CFLAGS
321 LIBS=$linuxsampler_save_LIBS
322 fi
323 AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
324 AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
325 [Define to 1 if you have JACK with MIDI support installed.])
326 config_have_jack_midi="no"
327 if test $have_jack_midi = "1"; then
328 config_have_jack_midi="yes"
329 fi
330
331 # ARTS
332 AC_ARG_ENABLE(arts-driver,
333 [ --disable-arts-driver
334 Disable support for the Analogue Realtime System
335 (aRts).],
336 [config_arts_driver="$enableval"],
337 [config_arts_driver="yes"]
338 )
339 have_arts=0
340 if test "$config_arts_driver" = "yes"; then
341 m4_ifdef([m4_include(m4/arts.m4)],,
342 [sinclude([m4/arts.m4])])
343 AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
344 if test "$have_arts" = "1"; then
345 have_audio_output_driver="true"
346 fi
347 else
348 echo "ARTS support disabled by configure script parameter"
349 fi
350 AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
351 AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
352 config_have_arts="no"
353 if test $have_arts = "1"; then
354 config_have_arts="yes"
355 fi
356
357 # ASIO AUDIO (Win32)
358 AC_ARG_ENABLE(asiosdk-dir,
359 [ --enable-asiosdk-dir
360 Directory where the ASIO SDK is located, this automatically
361 enables the compilation of the ASIO audio output driver.],
362 [config_asiosdk_dir="${enableval}"],
363 [config_asiosdk_dir="."]
364 )
365 AC_SUBST(config_asiosdk_dir)
366
367 AC_ARG_ENABLE(asio-driver,
368 [ --disable-asio-driver
369 Disable support for the Windows ASIO driver.],
370 [config_asio_driver="$enableval"],
371 [config_asio_driver="yes"]
372 )
373 have_asio=0
374 ASIOSDK_BASEDIR=
375 if test "$config_asio_driver" = "yes"; then
376 asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
377 echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
378 if test -e $asiosdk_headerfile ; then
379 echo yes
380 have_asio=1
381 ASIOSDK_BASEDIR="$config_asiosdk_dir"
382 else
383 echo no
384 have_asio=0
385 fi
386 if test "$have_asio" = "1"; then
387 have_audio_output_driver="true"
388 fi
389 else
390 echo "Windows ASIO support disabled by configure script parameter"
391 fi
392 AC_SUBST(ASIOSDK_BASEDIR)
393 AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
394 AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
395 config_have_asio="no"
396 if test $have_asio = "1"; then
397 config_have_asio="yes"
398 fi
399
400 # MidiShare (Linux, OS X, Windows)
401 AC_ARG_ENABLE(midishare-driver,
402 [ --disable-midishare-driver
403 Disable support for the MidiShare system.],
404 [config_midishare_driver="$enableval"],
405 [config_midishare_driver="yes"]
406 )
407 have_midishare=0
408 if test "$config_midishare_driver" = "yes"; then
409 AC_CHECK_HEADER(MidiShare.h,
410 AC_CHECK_LIB(MidiShare, MidiCountEvs,
411 have_midishare=1,
412 have_midishare=0
413 )
414 ,
415 have_midishare=0
416 )
417 if test "$have_midishare" = "1"; then
418 have_midi_input_driver="true"
419 fi
420 else
421 echo "MidiShare support disabled by configure script parameter"
422 fi
423 AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
424 AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
425 config_have_midishare="no"
426 if test $have_midishare = "1"; then
427 config_have_midishare="yes"
428 fi
429
430 # CoreMIDI (OS X)
431 AC_ARG_ENABLE(coremidi-driver,
432 [ --disable-coremidi-driver
433 Disable support for the Apple CoreMIDI system.],
434 [config_coremidi_driver="$enableval"],
435 [config_coremidi_driver="yes"]
436 )
437 have_coremidi=0
438 if test "$config_coremidi_driver" = "yes"; then
439 AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
440 have_coremidi=1,
441 have_coremidi=0
442 )
443 if test "$have_coremidi" = "1"; then
444 have_midi_input_driver="true"
445 fi
446 else
447 echo "CoreMIDI support disabled by configure script parameter"
448 fi
449 AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
450 AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
451 config_have_coremidi="no"
452 if test $have_coremidi = "1"; then
453 config_have_coremidi="yes"
454 fi
455
456 # CoreAudio (OS X)
457 AC_ARG_ENABLE(coreaudio-driver,
458 [ --disable-coreaudio-driver
459 Disable support for the Apple CoreAudio system.],
460 [config_coreaudio_driver="$enableval"],
461 [config_coreaudio_driver="yes"]
462 )
463 have_coreaudio=0
464 if test "$config_coreaudio_driver" = "yes"; then
465 AC_CHECK_HEADER(CoreAudio/CoreAudio.h,
466 have_coreaudio=1,
467 have_coreaudio=0
468 )
469 if test "$have_coreaudio" = "1"; then
470 have_audio_output_driver="true"
471 fi
472 else
473 echo "CoreAudio support disabled by configure script parameter"
474 fi
475 AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1")
476 AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.])
477 config_have_coreaudio="no"
478 if test $have_coreaudio = "1"; then
479 config_have_coreaudio="yes"
480 fi
481
482 # MME MIDI (Win32)
483 AC_ARG_ENABLE(mmemidi-driver,
484 [ --disable-mmemidi-driver
485 Disable support for the Windows MME MIDI system.],
486 [config_mmemidi_driver="$enableval"],
487 [config_mmemidi_driver="yes"]
488 )
489 have_mmemidi=0
490 if test "$config_mmemidi_driver" = "yes"; then
491 AC_CHECK_HEADERS(mmsystem.h,
492 have_mmemidi=1,
493 have_mmemidi=0
494 )
495 if test "$have_mmemidi" = "1"; then
496 have_midi_input_driver="true"
497 fi
498 else
499 echo "MME MIDI support disabled by configure script parameter"
500 fi
501 AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
502 AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
503 config_have_mme="no"
504 if test $have_mmemidi = "1"; then
505 config_have_mme="yes"
506 fi
507
508 # DSSI
509 AC_CHECK_HEADERS(dssi.h,
510 config_have_dssi="yes",
511 config_have_dssi="no")
512 AM_CONDITIONAL(HAVE_DSSI, test $config_have_dssi = "yes")
513
514 # LV2
515 PKG_CHECK_MODULES(LV2, lv2core, config_have_lv2="yes", config_have_lv2="no")
516 if test $config_have_lv2 = "no"; then
517 AC_CHECK_HEADER(lv2.h, config_have_lv2="yes", config_have_lv2="no")
518 fi
519 AM_CONDITIONAL(HAVE_LV2, test $config_have_lv2 = "yes")
520
521 # VST
522 AC_ARG_ENABLE(vstsdk-dir,
523 [ --enable-vstsdk-dir
524 Directory where the VST SDK is located.
525 This automatically enables the compilation
526 of the VST plugin.],
527 [VSTSDK_DIR="${enableval}"],
528 [VSTSDK_DIR=]
529 )
530 AC_SUBST(VSTSDK_DIR)
531 AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
532 config_have_vst="no"
533 if test "x$VSTSDK_DIR" != "x"; then
534 config_have_vst="yes"
535 fi
536
537 # AU
538 AC_CHECK_HEADERS(AudioUnit/AudioUnit.h,
539 config_have_au="yes",
540 config_have_au="no")
541 AM_CONDITIONAL(HAVE_AU, test $config_have_au = "yes")
542 AM_CONDITIONAL(HAVE_AUFLAGS, test "$AUFLAGS" != "")
543
544 if test $config_have_au = "yes" ; then
545 if test "x$DEVELOPER_EXTRAS_DIR" = "x" ; then
546 if test -d /Developer/Extras ; then
547 DEVELOPER_EXTRAS_DIR=/Developer/Extras
548 else
549 DEVELOPER_EXTRAS_DIR=/Developer/Examples
550 fi
551 fi
552 AC_SUBST(DEVELOPER_EXTRAS_DIR)
553 fi
554
555 # have we found at least one MIDI input and one audio output driver ?
556 if test "$have_midi_input_driver" = "false"; then
557 echo "No supported MIDI input system found!"
558 echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
559 echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
560 echo "If you think you have one of those available on your system, make sure you"
561 echo "also have the respective development (header) files installed."
562 exit -1;
563 fi
564 if test "$have_audio_output_driver" = "false"; then
565 echo "No supported audio output system found!"
566 echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
567 echo "driver at the moment!"
568 exit -1;
569 fi
570
571
572
573 ###########################################################################
574 # Checks for various DLL libraries
575
576 # Check presence of libgig
577 libgig_version="3.3.0"
578 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
579 if test "$HAVE_GIG" = "false"; then
580 echo "Required libgig version not found!"
581 echo "You need to have libgig version ${libgig_version} installed!"
582 exit -1;
583 else
584 echo "yes, found libgig $libgig_version"
585 fi
586 AC_SUBST(GIG_CFLAGS)
587 AC_SUBST(GIG_LIBS)
588
589 # SF2 Engine (requires libgig)
590 AC_ARG_ENABLE(sf2-engine,
591 [ --disable-sf2-engine
592 Disable compilation of the SF2 engine.
593 You need to have libgig installed.],
594 [config_sf2_engine="$enableval"],
595 [config_sf2_engine="yes"]
596 )
597 HAVE_SF2=0;
598 if test "$config_sf2_engine" = "yes"; then
599 HAVE_SF2=1
600 else
601 echo "SF2 engine disabled by configure script parameter"
602 fi
603 AM_CONDITIONAL(HAVE_SF2, test $HAVE_SF2 = 1)
604 AC_DEFINE_UNQUOTED(HAVE_SF2,$HAVE_SF2,[Define to 1 if you want SF2 engine and have libsf2 installed.])
605 config_have_sf2="no"
606 if test $HAVE_SF2 = "1"; then
607 config_have_sf2="yes"
608 fi
609
610 # Check presence of libsndfile
611 libsndfile_version="1.0"
612 PKG_CHECK_MODULES(SNDFILE, sndfile >= $libsndfile_version, HAVE_SNDFILE=true, HAVE_SNDFILE=false)
613 if test "$HAVE_SNDFILE" = "false"; then
614 echo "Required libsndfile version not found!"
615 echo "You need to have libsndfile version ${libsndfile_version} installed!"
616 exit -1;
617 else
618 echo "yes, found libsndfile $libsndfile_version"
619 fi
620 AC_SUBST(SNDFILE_CFLAGS)
621 AC_SUBST(SNDFILE_LIBS)
622
623 # Check for Vorbis support in libsndfile
624 linuxsampler_save_CFLAGS=$CFLAGS
625 CFLAGS="$SNDFILE_CFLAGS $CFLAGS"
626 AC_CHECK_DECLS([SF_FORMAT_VORBIS], [], [] ,[[#include <sndfile.h>]])
627
628 # Check for loop functionality in libsndfile
629 AC_CHECK_MEMBERS([SF_INSTRUMENT.loops],,
630 [AC_MSG_WARN([Your version of libsndfile does not support
631 reading of loop information. LinuxSampler will not be able to
632 extract loop information from sample files.])],
633 [#include <sndfile.h>])
634 CFLAGS=$linuxsampler_save_CFLAGS
635
636 # Instruments DB feature (requires SQLite 3.3)
637 AC_ARG_ENABLE(instruments-db,
638 [ --disable-instruments-db
639 Disable compilation of the sampler's instruments
640 database feature. You need to have SQLite 3.3
641 or younger installed for this feature.],
642 [config_instruments_db="$enableval"],
643 [config_instruments_db="yes"]
644 )
645 HAVE_SQLITE3=0;
646 if test "$config_instruments_db" = "yes"; then
647 # Check presence of sqlite3
648 sqlite_version="3.3"
649 PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
650 AC_SUBST(SQLITE3_LIBS)
651 AC_SUBST(SQLITE3_CFLAGS)
652 if test $HAVE_SQLITE3 = false; then
653 HAVE_SQLITE3=0
654 config_instruments_db="no"
655 echo "*** Required sqlite version not found!"
656 echo "*** You need to have sqlite version ${sqlite_version} or higher"
657 echo "*** for instruments database support to be enabled."
658 echo "*** Support for instruments DB will be disabled!"
659 else
660 HAVE_SQLITE3=1
661 fi
662 else
663 echo "Instruments DB feature disabled by configure script parameter"
664 fi
665 AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
666 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
667
668
669
670 ###########################################################################
671 # Handle Configuration Options
672
673 # TODO: should we use AC_ARG_VAR(variable, description) instead?
674
675 AC_ARG_ENABLE(asm,
676 [ --disable-asm
677 Enable hand-crafted assembly optimizations
678 (default=on). LinuxSampler provides CPU specific
679 assembly optimizations. This is currently limited
680 to just enter a fast (denormal) FPU mode on x86
681 platforms. There are currently no synthesis core
682 assembly optimizations anymore since LS 0.4.0],
683 [config_asm="$enableval"],
684 [config_asm="yes"]
685 )
686 if test "$config_asm" = "yes"; then
687 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
688 fi
689
690 AC_ARG_ENABLE(dev-mode,
691 [ --enable-dev-mode
692 Enable development mode (default=off). In that mode
693 we do some extra sanity checks here and there.
694 This helps to spot possible problems, but reduces
695 efficiency a bit],
696 [config_dev_mode="$enableval"],
697 [config_dev_mode="no"]
698 )
699 if test "$config_dev_mode" = "yes"; then
700 AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
701 fi
702
703 AC_ARG_ENABLE(debug-level,
704 [ --enable-debug-level
705 Specify verbosity of console messages (default=1).
706 The higher the value, the higher will be verbosity.
707 A value of 0 means no console output at all.
708 There's not really an upper limit but the usual
709 level of all messages is currently somewhere less
710 than 10.],
711 [config_debug_level="${enableval}"],
712 [config_debug_level="1"]
713 )
714 AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
715
716 AC_ARG_ENABLE(rt-exceptions,
717 [ --enable-rt-exceptions
718 Enable exceptions in the realtime thread
719 (default=no). If this is enabled, exceptions will
720 be thrown on critical errors in the realtime
721 context as well. Otherwise if disabled
722 segmentation faults will be forced by the
723 application on critical errors.],
724 [config_rt_exceptions="$enableval"],
725 [config_rt_exceptions="no"]
726 )
727 if test "$config_rt_exceptions" = "yes"; then
728 AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
729 fi
730
731 config_pthread_testcancel="$mac"
732 AC_ARG_ENABLE(pthread-testcancel,
733 [ --enable-pthread-testcancel
734 Enable pthread_testcancel() calls and avoid
735 asynchronous cancel of pthreads (default=yes
736 for Mac targets, no otherwise).],
737 [config_pthread_testcancel="$enableval"],
738 []
739 )
740 if test "$config_pthread_testcancel" = "yes"; then
741 AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
742 fi
743
744 AC_ARG_ENABLE(preload-samples,
745 [ --enable-preload-samples
746 Due to seeking and latency issues with hard drives
747 we have to cache a small part of samples' head in
748 RAM (default=32768). The higher this value the
749 more memory will be occupied for each sample, but
750 the safer this will be in regards of possible
751 droputs. A 'good' value depends on the running
752 system and usage dependant factors.],
753 [config_preload_samples="${enableval}"],
754 [config_preload_samples="32768"]
755 )
756 AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
757
758 AC_ARG_ENABLE(max-pitch,
759 [ --enable-max-pitch
760 Specify the maximum allowed pitch value in octaves
761 (default=4). To lower memory usage you might want
762 set a smaller value.],
763 [config_max_pitch="${enableval}"],
764 [config_max_pitch="4"]
765 )
766 AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
767
768 AC_ARG_ENABLE(max-events,
769 [ --enable-max-events
770 Specify the maximum allowed amount of events to be
771 processed per fragment (default=1024).],
772 [config_max_events="${enableval}"],
773 [config_max_events="1024"]
774 )
775 AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
776
777 AC_ARG_ENABLE(eg-bottom,
778 [ --enable-eg-bottom
779 Bottom limit of envelope generators
780 (default=0.001). Certain kinds of curve types like
781 exponential curves converge against 0 but never
782 reach 0. So we have to define a certain low value
783 after which we should consider all smaller values
784 to be 'almost zero'. The smaller this value, the
785 longer will voices survive in EG's release stage
786 and thus waste voices. If this value is too high
787 will cause click sounds though.],
788 [config_eg_bottom="${enableval}"],
789 [config_eg_bottom="0.001"]
790 )
791 AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
792
793 AC_ARG_ENABLE(eg-min-release-time,
794 [ --enable-eg-min-release-time
795 Specify the lowest allowed release time in seconds
796 (default=0.0025). This value will also be used to
797 ramp down voices on voice stealing. This value
798 should always be less than the period time of the
799 used audio driver, as in case of voice stealing
800 the killed voice needs to be completely ramped
801 down in the same fragment.],
802 [config_eg_min_release_time="${enableval}"],
803 [config_eg_min_release_time="0.0025"]
804 )
805 AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
806
807 AC_ARG_ENABLE(refill-streams,
808 [ --enable-refill-streams
809 Number of streams that should be refilled in each
810 disk thread cycle (default=4).],
811 [config_refill_streams="${enableval}"],
812 [config_refill_streams="4"]
813 )
814 AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
815
816 AC_ARG_ENABLE(stream-min-refill,
817 [ --enable-stream-min-refill
818 Minimum refill size for disk streams (default=1024).
819 The disk thread will go to sleep for a while if no
820 stream had to be refilled more than this value in
821 a disk thread cycle.],
822 [config_stream_min_refill="${enableval}"],
823 [config_stream_min_refill="1024"]
824 )
825 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
826
827 AC_ARG_ENABLE(stream-max-refill,
828 [ --enable-stream-max-refill
829 Maximum refill size for disk streams
830 (default=65536). The disk thread will refill
831 each stream only by a size of this value per
832 disk thread cycle.],
833 [config_stream_max_refill="${enableval}"],
834 [config_stream_max_refill="65536"]
835 )
836 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
837
838 AC_ARG_ENABLE(stream-size,
839 [ --enable-stream-size
840 Size of each stream's ring buffer in sample points
841 (default=262144).],
842 [config_stream_size="${enableval}"],
843 [config_stream_size="262144"]
844 )
845 AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
846
847 AC_ARG_ENABLE(max-streams,
848 [ --enable-max-streams
849 Initial maximum amount of disk streams
850 (default=90). This value can be changed at
851 runtime. It should always be higher than the
852 maximum amount of voices.],
853 [config_max_streams="${enableval}"],
854 [config_max_streams="90"]
855 )
856 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
857
858 AC_ARG_ENABLE(max-voices,
859 [ --enable-max-voices
860 Initial maximum amount of voices (default=64).
861 This value can be changed at runtime. It should
862 always be lower than the maximum amount of disk
863 streams.],
864 [config_max_voices="${enableval}"],
865 [config_max_voices="64"]
866 )
867 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
868
869 AC_ARG_ENABLE(subfragment-size,
870 [ --enable-subfragment-size
871 Every audio fragment will be splitted into
872 subfragments. Where each subfragment renders
873 audio with constant synthesis parameters. This is
874 done for efficiency reasons. This parameter
875 defines the default size of a subfragment in
876 sample points. A large value means less CPU time
877 whereas a low value means better audio quality
878 (default=32).],
879 [config_subfragment_size="${enableval}"],
880 [config_subfragment_size="32"]
881 )
882 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
883
884 AC_ARG_ENABLE(global-attenuation-default,
885 [ --enable-global-attenuation-default
886 To prevent clipping all samples will be lowered
887 in amplitude by this given default factor (can
888 be overridden at runtime).
889 (default=0.35)],
890 [config_global_attenuation_default="${enableval}"],
891 [config_global_attenuation_default="0.35"]
892 )
893 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
894
895 AC_ARG_ENABLE(voice-steal-algo,
896 [ --enable-voice-steal-algo
897 Voice stealing algorithm to be used. Currently
898 available options:
899 none:
900 Disable voice stealing completely.
901 oldestvoiceonkey (default):
902 Try to kill a voice on the same key first,
903 if no success, proceed with the oldest key.
904 oldestkey:
905 Try to kill a voice from the oldest active
906 key.],
907 [ if test ! "(" "${enableval}" = "none" \
908 -o "${enableval}" = "oldestvoiceonkey" \
909 -o "${enableval}" = "oldestkey" ")" ; then
910 AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
911 else
912 config_voice_steal_algo="${enableval}"
913 fi
914 ],
915 [config_voice_steal_algo="oldestvoiceonkey"]
916 )
917 AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
918
919 AC_ARG_ENABLE(sysex-buffer-size,
920 [ --enable-sysex-buffer-size
921 System Exclusive Message buffer size in kB
922 (default=2048).],
923 [config_sysex_buffer_size="${enableval}"],
924 [config_sysex_buffer_size="2048"]
925 )
926 AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
927
928 AC_ARG_ENABLE(force-filter,
929 [ --enable-force-filter
930 If enabled will force filter to be used even if
931 no usage was define in instrument patch files.
932 (default=no).],
933 [config_force_filter="$enableval"],
934 [config_force_filter="no"]
935 )
936 if test "$config_force_filter" = "yes"; then
937 AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
938 fi
939
940 AC_ARG_ENABLE(filter-cutoff-min,
941 [ --enable-filter-cutoff-min
942 Minimum filter cutoff frequency in Hz
943 (default=100.0).],
944 [config_filter_cutoff_min="${enableval}"],
945 [config_filter_cutoff_min="100.0"]
946 )
947 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
948
949 AC_ARG_ENABLE(filter-cutoff-max,
950 [ --enable-filter-cutoff-max
951 Maximum filter cutoff frequency in Hz
952 (default=10000.0).],
953 [config_filter_cutoff_max="${enableval}"],
954 [config_filter_cutoff_max="10000.0"]
955 )
956 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
957
958 AC_ARG_ENABLE(override-cutoff-ctrl,
959 [ --enable-override-cutoff-ctrl
960 Override filter cutoff MIDI controller (default=no).
961 Note: you have to define the MIDI controller number
962 here, it's not a boolean parameter type! If this
963 option is used, controller number given by
964 instrument patch will be ignored and instead this
965 supplied value will be used.],
966 [config_override_cutoff_ctrl="${enableval}"],
967 [config_override_cutoff_ctrl="no"]
968 )
969 if test ! "$config_override_cutoff_ctrl" = "no"; then
970 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
971 fi
972
973 AC_ARG_ENABLE(override-resonance-ctrl,
974 [ --enable-override-resonance-ctrl
975 Override filter resonance MIDI controller
976 (default=no). Note: you have to define the MIDI
977 controller number here, it's not a boolean
978 parameter type! If this option is used, controller
979 number given by instrument patch will be ignored
980 and instead this supplied value will be used.],
981 [config_override_resonance_ctrl="${enableval}"],
982 [config_override_resonance_ctrl="no"]
983 )
984 if test ! "$config_override_resonance_ctrl" = "no"; then
985 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
986 fi
987
988 AC_ARG_ENABLE(override-filter-type,
989 [ --enable-override-filter-type
990 Override filter type (default=no). Options:
991 hp: for highpass
992 bp: for bandpass
993 br: for bandreject
994 lp: for lowpass
995 lpt: for lowpass turbo],
996 [ if test "${enableval}" = "hp" ; then
997 config_override_filter_type="::gig::vcf_type_highpass"
998 elif test "${enableval}" = "bp" ; then
999 config_override_filter_type="::gig::vcf_type_bandpass"
1000 elif test "${enableval}" = "br" ; then
1001 config_override_filter_type="::gig::vcf_type_bandreject"
1002 elif test "${enableval}" = "lp" ; then
1003 config_override_filter_type="::gig::vcf_type_lowpass"
1004 elif test "${enableval}" = "lpt" ; then
1005 config_override_filter_type="::gig::vcf_type_lowpassturbo"
1006 elif test ! "${enableval}" = "no"; then
1007 AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
1008 fi
1009 ],
1010 [config_override_filter_type="no"]
1011 )
1012 if test ! "$config_override_filter_type" = "no"; then
1013 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
1014 fi
1015
1016 AC_ARG_ENABLE(gs-checksum,
1017 [ --enable-gs-checksum
1018 Enable Roland General Synth SysEx checksum check
1019 (default=no). If this is enabled, all GS SysEx
1020 messages which do not provide a correct checksum
1021 will be ignored. This is disabled by default as
1022 not all devices honor GS checksums.],
1023 [config_assert_gs_sysex_checksum="$enableval"],
1024 [config_assert_gs_sysex_checksum="no"]
1025 )
1026 if test "config_assert_gs_sysex_checksum" = "yes"; then
1027 AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
1028 fi
1029
1030 AC_ARG_ENABLE(portamento-time-min,
1031 [ --enable-portamento-time-min
1032 Minimum Portamento time in seconds
1033 (default=0.1).],
1034 [config_portamento_time_min="${enableval}"],
1035 [config_portamento_time_min="0.1"]
1036 )
1037 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
1038
1039 AC_ARG_ENABLE(portamento-time-max,
1040 [ --enable-portamento-time-max
1041 Maximum Portamento time in seconds
1042 (default=32).],
1043 [config_portamento_time_max="${enableval}"],
1044 [config_portamento_time_max="32"]
1045 )
1046 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
1047
1048 AC_ARG_ENABLE(portamento-time-default,
1049 [ --enable-portamento-time-default
1050 Default Portamento time in seconds
1051 (default=1).],
1052 [config_portamento_time_default="${enableval}"],
1053 [config_portamento_time_default="1"]
1054 )
1055 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
1056
1057 AC_ARG_ENABLE(signed-triang-algo,
1058 [ --enable-signed-triang-algo
1059 Signed triangular wave algorithm to be used (e.g. for LFOs).
1060 Currently available options:
1061 intmath:
1062 Uses integer math without any branch will then be
1063 converted to floating point value for each sample point.
1064 This int->float conversion might hurt on some systems.
1065 intmathabs:
1066 Similar to intmath but uses abs() function.
1067 Depending on compiler and platrofm this could
1068 perform better than integer math as it avoids
1069 an extra integer multiply instruction.
1070 diharmonic:
1071 The triangular wave will be approximated by adding two
1072 sinusoidials. This solution might especially hurt on
1073 systems with weak floating point unit.
1074 benchmark (default):
1075 This is not an algorithm. Use this option if the
1076 appropriate algorithm should be automatically
1077 chosen by the configure script by performing a
1078 benchmark between the algorithms mentioned above.
1079 This will NOT work for cross compilation!],
1080 [ if test ! "(" "${enableval}" = "intmath" \
1081 -o "${enableval}" = "intmathabs" \
1082 -o "${enableval}" = "diharmonic" ")" ; then
1083 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
1084 else
1085 config_signed_triang_algo="${enableval}"
1086 fi
1087 ],
1088 [config_signed_triang_algo="benchmark"]
1089 )
1090
1091 AC_ARG_ENABLE(unsigned-triang-algo,
1092 [ --enable-unsigned-triang-algo
1093 Unsigned triangular wave algorithm to be used (e.g. for LFOs).
1094 Currently available options:
1095 intmath:
1096 Uses integer math without any branch will then be
1097 converted to floating point value for each sample point.
1098 This int->float conversion might hurt on some systems.
1099 intmathabs:
1100 Similar to intmath but uses abs() function.
1101 Depending on compiler and platrofm this could
1102 perform better than integer math as it avoids
1103 an extra integer multiply instruction.
1104 diharmonic:
1105 The triangular wave will be approximated by adding two
1106 sinusoidials. This solution might especially hurt on
1107 systems with weak floating point unit.
1108 benchmark (default):
1109 This is not an algorithm. Use this option if the
1110 appropriate algorithm should be automatically
1111 chosen by the configure script by performing a
1112 benchmark between the algorithms mentioned above.
1113 This will NOT work for cross compilation!],
1114 [ if test ! "(" "${enableval}" = "intmath" \
1115 -o "${enableval}" = "intmathabs" \
1116 -o "${enableval}" = "diharmonic" ")" ; then
1117 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
1118 else
1119 config_unsigned_triang_algo="${enableval}"
1120 fi
1121 ],
1122 [config_unsigned_triang_algo="benchmark"]
1123 )
1124
1125 AC_ARG_ENABLE(process-muted-channels,
1126 [ --enable-process-muted-channels
1127 Enable processing of muted channels (default=no).
1128 In that mode all MIDI events in the muted channels
1129 will be processed. This will provide information
1130 about the active voices in the muted channels and
1131 will not discard notes, triggered in mute mode,
1132 when the channel is unmuted. But also will reduce
1133 the efficiency.],
1134 [config_process_muted_channels="$enableval"],
1135 [config_process_muted_channels="no"]
1136 )
1137 if test "$config_process_muted_channels" = "yes"; then
1138 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
1139 fi
1140
1141 AC_ARG_ENABLE(process-all-notes-off,
1142 [ --disable-process-all-notes-off
1143 Disable interpretation of All-Notes-Off MIDI
1144 messages (default=on). By default LS will release
1145 all voices whenever it receives an All-Notes-Off
1146 MIDI message. You can disable this behavior, so
1147 that LS simply ignores such messages.],
1148 [config_process_all_notes_off="$enableval"],
1149 [config_process_all_notes_off="yes"]
1150 )
1151 if test "$config_process_all_notes_off" = "yes"; then
1152 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
1153 fi
1154
1155 AC_ARG_ENABLE(interpolate-volume,
1156 [ --disable-interpolate-volume
1157 Disable interpolation of volume modulation
1158 (default=on). With this enabled, the volume changes
1159 generated by for example the envelope generator
1160 will be smoother, minimizing the risk for audio
1161 clicks. Disable it to reduce CPU usage.],
1162 [config_interpolate_volume="$enableval"],
1163 [config_interpolate_volume="yes"]
1164 )
1165 if test "$config_interpolate_volume" = "yes"; then
1166 AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
1167 fi
1168
1169 AC_ARG_ENABLE(master-volume-sysex-by-port,
1170 [ --enable-master-volume-sysex-by-port
1171 Whether global volume sysex message should be
1172 applied globally to the whole sampler or only to
1173 the sampler channels connected to the same MIDI
1174 input port on which the sysex message arrived on.
1175 By default global volume sysex messages apply
1176 globally to the whole sampler, since many MIDI
1177 devices behave that way.],
1178 [config_master_volume_sysex_by_port="$enableval"],
1179 [config_master_volume_sysex_by_port="no"]
1180 )
1181 if test "$config_master_volume_sysex_by_port" = "yes"; then
1182 AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
1183 fi
1184
1185 AC_ARG_ENABLE(plugin-dir,
1186 [ --enable-plugin-dir
1187 Directory where the sampler shall look for potential plugins,
1188 that is 3rd party shared libraries that should be loaded by
1189 the sampler on startup. By default the sampler will search
1190 for plugins in the subdirectory "plugins" below its own
1191 library directory.
1192 (i.e. /usr/local/lib/linuxsampler/plugins)],
1193 [config_plugin_dir="${enableval}"],
1194 [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1195 )
1196 AC_SUBST(config_plugin_dir)
1197
1198 AC_ARG_ENABLE(default-instruments-db-location,
1199 [ --enable-default-instruments-db-location
1200 Only when instruments DB feature is enabled: file name
1201 which shall be taken as default location of the
1202 instruments DB file. This location can still be
1203 overridden at runtime with a command line switch.
1204 (default: /var/lib/linuxsampler/instruments.db)],
1205 [config_default_instruments_db_file="${enableval}"],
1206 [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1207 )
1208 AC_DEFINE_UNQUOTED(
1209 CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1210 "$config_default_instruments_db_file",
1211 [Only when instruments DB feature is enabled: default location of the DB file.]
1212 )
1213 AC_SUBST(config_default_instruments_db_file)
1214
1215
1216 ###########################################################################
1217 # Automatic Benchmarks (to detect the best algorithms for the system)
1218
1219 AC_LANG_SAVE
1220
1221 if test "$config_signed_triang_algo" = "benchmark"; then
1222 echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1223 AC_LANG_CPLUSPLUS
1224 AC_TRY_RUN([
1225 #define SIGNED 1
1226 #define SILENT 1
1227 #include "${srcdir}/benchmarks/triang.cpp"
1228 ],
1229 triang_signed=0,
1230 triang_signed=$?,
1231 triang_signed=0
1232 )
1233 if test "$triang_signed" = "2"; then
1234 config_signed_triang_algo="intmath"
1235 echo "integer math"
1236 elif test "$triang_signed" = "3"; then
1237 config_signed_triang_algo="diharmonic"
1238 echo "di harmonics"
1239 elif test "$triang_signed" = "5"; then
1240 config_signed_triang_algo="intmathabs"
1241 echo "integer math using abs()"
1242 else
1243 echo "Benchmark of signed triangular wave algorithms failed!"
1244 echo "Maybe you are doing cross compilation? In that case you have to select"
1245 echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1246 echo "Call './configure --help' for further information or read configure.in."
1247 exit -1;
1248 fi
1249 else
1250 case "$config_signed_triang_algo" in
1251 intmath)
1252 triang_signed=2 ;;
1253 diharmonic)
1254 triang_signed=3 ;;
1255 intmathabs)
1256 triang_signed=5 ;;
1257 esac
1258 fi
1259 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1260
1261 if test "$config_unsigned_triang_algo" = "benchmark"; then
1262 echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1263 AC_LANG_CPLUSPLUS
1264 AC_TRY_RUN([
1265 #define SIGNED 0
1266 #define SILENT 1
1267 #include "${srcdir}/benchmarks/triang.cpp"
1268 ],
1269 triang_unsigned=0,
1270 triang_unsigned=$?,
1271 triang_unsigned=0
1272 )
1273 if test "$triang_unsigned" = "2"; then
1274 config_unsigned_triang_algo="intmath"
1275 echo "integer math"
1276 elif test "$triang_unsigned" = "3"; then
1277 config_unsigned_triang_algo="diharmonic"
1278 echo "di harmonics"
1279 elif test "$triang_unsigned" = "5"; then
1280 config_unsigned_triang_algo="intmathabs"
1281 echo "integer math using abs()"
1282 else
1283 echo "Benchmark of unsigned triangular wave algorithms failed!"
1284 echo "Maybe you are doing cross compilation? In that case you have to select"
1285 echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1286 echo "Call './configure --help' for further information or read configure.in."
1287 exit -1;
1288 fi
1289 else
1290 case "$config_unsigned_triang_algo" in
1291 intmath)
1292 triang_unsigned=2 ;;
1293 diharmonic)
1294 triang_unsigned=3 ;;
1295 intmathabs)
1296 triang_unsigned=5 ;;
1297 esac
1298 fi
1299 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1300
1301 AC_LANG_RESTORE
1302
1303
1304 ###########################################################################
1305 # Create Build Files
1306
1307 AM_CONFIG_HEADER(config.h)
1308 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1309
1310 AC_LANG_CPLUSPLUS
1311
1312 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1313 # this, the dlfcn.h check in am_prog_libtool may fail.
1314 AC_CHECK_HEADER(stdlib.h)
1315
1316 AC_OUTPUT( \
1317 Makefile \
1318 man/Makefile \
1319 man/linuxsampler.1 \
1320 src/Makefile \
1321 src/db/Makefile \
1322 src/network/Makefile \
1323 src/engines/Makefile \
1324 src/engines/gig/Makefile \
1325 src/engines/sf2/Makefile \
1326 src/engines/sfz/Makefile \
1327 src/engines/common/Makefile \
1328 src/effects/Makefile \
1329 src/common/Makefile \
1330 src/testcases/Makefile \
1331 src/drivers/Makefile \
1332 src/drivers/audio/Makefile \
1333 src/drivers/midi/Makefile \
1334 src/plugins/Makefile \
1335 src/hostplugins/Makefile \
1336 src/hostplugins/dssi/Makefile \
1337 src/hostplugins/lv2/Makefile \
1338 src/hostplugins/vst/Makefile \
1339 src/hostplugins/au/Makefile \
1340 linuxsampler.spec \
1341 debian/Makefile \
1342 Artwork/Makefile \
1343 scripts/Makefile \
1344 osx/Makefile \
1345 osx/linuxsampler.xcodeproj/Makefile \
1346 Documentation/Makefile \
1347 Documentation/Engines/Makefile \
1348 Documentation/Engines/gig/Makefile \
1349 linuxsampler.pc \
1350 Doxyfile \
1351 )
1352
1353 # resolve all nested variables in '${config_plugin_dir}'
1354 # (merely for providing a human readable summary below)
1355 while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1356 config_plugin_dir=`eval echo ${config_plugin_dir}`
1357 done
1358
1359
1360 ###########################################################################
1361 # Output All Configuration Options
1362
1363 echo ""
1364 echo "#####################################################################"
1365 echo "# LinuxSampler Configuration #"
1366 echo "#-------------------------------------------------------------------#"
1367 echo "# Release Version: ${LINUXSAMPLER_RELEASE_MAJOR}.${LINUXSAMPLER_RELEASE_MINOR}.${LINUXSAMPLER_RELEASE_BUILD}"
1368 echo "# LSCP Version: ${LSCP_RELEASE_MAJOR}.${LSCP_RELEASE_MINOR}"
1369 echo "#-------------------------------------------------------------------"
1370 echo "# Assembly Optimizations: ${config_asm}"
1371 echo "# Development Mode: ${config_dev_mode}"
1372 echo "# Debug Level: ${config_debug_level}"
1373 echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1374 echo "# Preload Samples: ${config_preload_samples}"
1375 echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1376 echo "# Maximum Events: ${config_max_events}"
1377 echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1378 echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1379 echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1380 echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1381 echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1382 echo "# Stream Size: ${config_stream_size}"
1383 echo "# Default Maximum Disk Streams: ${config_max_streams}"
1384 echo "# Default Maximum Voices: ${config_max_voices}"
1385 echo "# Default Subfragment Size: ${config_subfragment_size}"
1386 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1387 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1388 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1389 echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1390 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1391 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1392 echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1393 echo "# Default Portamento Time: ${config_portamento_time_default} s"
1394 echo "# Force Filter Usage: ${config_force_filter}"
1395 echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1396 echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1397 echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1398 echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1399 echo "# Override Filter Type: ${config_override_filter_type}"
1400 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1401 echo "# Process Muted Channels: ${config_process_muted_channels}"
1402 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1403 echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
1404 echo "# Interpolate Volume: ${config_interpolate_volume}"
1405 echo "# Instruments database support: ${config_instruments_db}"
1406 if test "$config_instruments_db" = "yes"; then
1407 echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1408 fi
1409 echo "# Plugin Path: ${config_plugin_dir}"
1410 echo "#-------------------------------------------------------------------"
1411 echo "# MIDI Input Drivers:"
1412 echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack_midi}, CoreMIDI: ${config_have_coremidi}, MME: ${config_have_mme}, MidiShare: ${config_have_midishare}"
1413 echo "#-------------------------------------------------------------------"
1414 echo "# Audio Output Drivers:"
1415 echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack}, ARTS: ${config_have_arts}, CoreAudio: ${config_have_coreaudio}, ASIO: ${config_have_asio}"
1416 echo "#-------------------------------------------------------------------"
1417 echo "# Sampler Engines:"
1418 echo "# GIG: yes, SF2: ${config_have_sf2}, SFZ: yes"
1419 echo "#-------------------------------------------------------------------"
1420 echo "# Effect plugin systems for internal effects:"
1421 echo "# LADSPA: yes"
1422 echo "#-------------------------------------------------------------------"
1423 echo "# Building sampler as plugin for following host standards:"
1424 echo "# DSSI: ${config_have_dssi}, LV2: ${config_have_lv2}, VST: ${config_have_vst}, AU: ${config_have_au}"
1425 echo "#-------------------------------------------------------------------#"
1426 echo "# Read './configure --help' or file 'configure.in' for details. #"
1427 echo "#####################################################################"
1428 echo ""
1429 echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1430 echo ""

  ViewVC Help
Powered by ViewVC