/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Contents of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 2343 - (show annotations) (download)
Sun Apr 29 16:14:45 2012 UTC (11 years, 10 months ago) by persson
Original Path: linuxsampler/trunk/configure.in
File size: 57800 byte(s)
* fixed configure script error with old autoconf versions
* LV2: use the new lv2 package if present
* lsatomic.h: use gcc provided atomic functions if building with gcc
  4.7 and C++11
* added comments in lsatomic.h

1 AC_INIT(configure.in)
2
3 #------------------------------------------------------------------------------------
4 # LinuxSampler's / liblinuxsampler's "official" release version:
5
6 LINUXSAMPLER_RELEASE_MAJOR=1
7 LINUXSAMPLER_RELEASE_MINOR=0
8 LINUXSAMPLER_RELEASE_BUILD=0.svn18
9
10 #------------------------------------------------------------------------------------
11 # The following is the libtool / shared library version. This doesn't have to
12 # do anything with the release version. It MUST conform to the following rules:
13 #
14 # 1. Start with version information of `0:0:0' for each libtool library.
15 # 2. Update the version information only immediately before a public release of
16 # your software. More frequent updates are unnecessary, and only guarantee
17 # that the current interface number gets larger faster.
18 # 3. If the library source code has changed at all since the last update, then
19 # increment revision (`c:r:a' becomes `c:r+1:a').
20 # 4. If any interfaces have been added, removed, or changed since the last update,
21 # increment current, and set revision to 0.
22 # 5. If any interfaces have been added since the last public release, then increment
23 # age.
24 # 6. If any interfaces have been removed since the last public release, then set age
25 # to 0.
26
27 LIBLINUXSAMPLER_LT_CURRENT=3
28 LIBLINUXSAMPLER_LT_REVISION=0
29 LIBLINUXSAMPLER_LT_AGE=0
30 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31
32 #------------------------------------------------------------------------------------
33 # the LSCP specification version this LinuSampler release complies with:
34
35 LSCP_RELEASE_MAJOR=1
36 LSCP_RELEASE_MINOR=5
37
38 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40
41 AC_PROG_CXX
42 AC_LIBTOOL_WIN32_DLL
43 AM_PROG_LIBTOOL
44
45 AC_SUBST(SHLIB_VERSION_ARG)
46 AC_SUBST(SHARED_VERSION_INFO)
47
48 AC_C_BIGENDIAN
49 AC_CANONICAL_HOST
50
51 PKG_PROG_PKG_CONFIG
52
53 ###########################################################################
54 # General Checks
55
56 AM_CONDITIONAL(CROSS_COMPILING, test $cross_compiling = yes)
57
58 AC_MSG_CHECKING([whether x86 architecture])
59 def_arch_x86=0
60 case $host_cpu in
61 "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
62 echo "yes"
63 def_arch_x86=1;;
64 *)
65 echo "no";;
66 esac
67 AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
68
69 # determine the right gcc switch for CPU specific optimizations
70 # (only if the user did not provide one)
71 CXX_CPU_SWITCH=
72 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
73 if test "$def_arch_x86" = 1 -a "$host_cpu" != "x86_64"; then
74 CXX_CPU_SWITCH="-march=$host_cpu"
75 elif test "$target_cpu" = "ppc"; then
76 CXX_CPU_SWITCH="-arch=$host_cpu"
77 fi
78 fi
79 AC_SUBST([CXX_CPU_SWITCH])
80
81 mac=no
82 linux=no
83 case "$host" in
84 *-*-darwin*)
85 mac=yes
86 ;;
87 *-*-linux*)
88 linux=yes
89 ;;
90 esac
91 AM_CONDITIONAL(LINUX, test "$linux" = yes)
92 AM_CONDITIONAL(MAC, test "$mac" = yes)
93
94 # check if we're on MS Windows
95 AC_CHECK_HEADERS(
96 mmsystem.h,
97 have_windows=1,
98 have_windows=0,
99 [#include <windef.h>]
100 )
101 AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
102
103 AC_MSG_CHECKING([whether UNIX98 compatible])
104 AC_LANG_SAVE
105 AC_LANG_C
106 AC_TRY_RUN([
107 #ifndef _GNU_SOURCE
108 #define _GNU_SOURCE 1
109 #endif
110 #include <features.h>
111 void main(void) {
112 #if _XOPEN_SOURCE >= 500
113 exit(0); /* UNIX98 compatible */
114 #else
115 exit(-1); /* not UNIX98 compatible */
116 #endif
117 }
118 ],
119 have_unix98="yes",
120 have_unix98="no",
121 have_unix98="no"
122 )
123 AC_LANG_RESTORE
124 AC_MSG_RESULT([$have_unix98])
125 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
126 if test "x$HAVE_UNIX98" = "x"; then
127 echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
128 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
129 echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
130 echo "have a UNIX98 compatible system."
131 exit -1;
132 fi
133 fi
134
135 # check for <features.h>
136 AC_CHECK_HEADERS(features.h)
137
138 # test for POSIX thread library
139 m4_ifdef([m4_include(m4/pthread.m4)],,
140 [sinclude([m4/pthread.m4])])
141 ACX_PTHREAD
142 LIBS="$PTHREAD_LIBS $LIBS"
143 CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
144 CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
145 CC="$PTHREAD_CC"
146
147 # check for a bug in NPTL-enabled glibc
148 # (see Gentoo bug report #194076)
149 AC_ARG_ENABLE(nptl-bug-check,
150 [ --disable-nptl-bug-check
151 Disable check for a bug in certain NPTL-enabled
152 glibc versions that caused crashs.],
153 [config_check_nptl_bug="$enableval"],
154 [config_check_nptl_bug="yes"]
155 )
156 if test "$config_check_nptl_bug" = "yes"; then
157 m4_ifdef([m4_include(m4/nptl_bug.m4)],,
158 [sinclude([m4/nptl_bug.m4])])
159 ACX_NPTL_GLIBC_BUG([
160 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
161 echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
162 echo "probably crash due to this. Please report us the system you are"
163 echo "using and/or file a bug report to the bug tracking system of"
164 echo "your distribution."
165 echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
166 echo "well, you can try to circumvent this problem for now by setting"
167 echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
168 echo "should cause this test to pass."
169 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
170 AC_MSG_ERROR([possibly NPTL glibc bug detected])
171 ])
172 else
173 echo "NPTL glibc bug check disabled"
174 fi
175
176 # FIXME: this is actually a dependency of libgig, not of LS directly, why
177 # isn't it hidden by libgig?
178 AC_CHECK_HEADERS(uuid/uuid.h)
179 AC_SEARCH_LIBS(uuid_generate, uuid)
180
181
182
183 ###########################################################################
184 # Checks for available audio and MIDI systems / drivers
185 # (we throw an error if there's not at least one system for audio output and MIDI input available)
186
187 have_midi_input_driver="false"
188 have_audio_output_driver="false"
189
190 # ALSA
191 AC_ARG_ENABLE(alsa-driver,
192 [ --disable-alsa-driver
193 Disable support for the Advanced Linux Sound
194 Architecture (ALSA).],
195 [config_alsa_driver="$enableval"],
196 [config_alsa_driver="yes"]
197 )
198 have_alsa=0
199 if test "$config_alsa_driver" = "yes"; then
200 AC_CHECK_HEADER(alsa/asoundlib.h,
201 AC_CHECK_LIB(asound, main,
202 have_alsa=1
203 ,
204 have_alsa=0
205 )
206 ,
207 have_alsa=0
208 )
209 if test "$have_alsa" = "1"; then
210 have_midi_input_driver="true"
211 have_audio_output_driver="true";
212 fi
213
214 echo -n "checking Alsa version... "
215 AC_LANG_SAVE
216 AC_LANG_C
217 AC_TRY_RUN([
218 #include <alsa/asoundlib.h>
219 void main(void) {
220 /* ensure backward compatibility */
221 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
222 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
223 #endif
224 exit(SND_LIB_MAJOR);
225 }
226 ],
227 alsa_major=0,
228 alsa_major=$?,
229 alsa_major=0
230 )
231 AC_TRY_RUN([
232 #include <alsa/asoundlib.h>
233 void main(void) {
234 /* ensure backward compatibility */
235 #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
236 #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
237 #endif
238 exit(SND_LIB_MINOR);
239 }
240 ],
241 alsa_minor=0,
242 alsa_minor=$?,
243 alsa_minor=0
244 )
245 AC_TRY_RUN([
246 #include <alsa/asoundlib.h>
247 void main(void) {
248 /* ensure backward compatibility */
249 #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
250 #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
251 #endif
252 exit(SND_LIB_SUBMINOR);
253 }
254 ],
255 alsa_subminor=0,
256 alsa_subminor=$?,
257 alsa_subminor=0
258 )
259 AC_LANG_RESTORE
260 echo "$alsa_major.$alsa_minor.$alsa_subminor";
261 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
262 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
263 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
264 else
265 echo "ALSA support disabled by configure script parameter"
266 fi
267 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
268 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
269 config_have_alsa="no"
270 if test $have_alsa = "1"; then
271 config_have_alsa="yes"
272 fi
273
274 # JACK
275 AC_ARG_ENABLE(jack-driver,
276 [ --disable-jack-driver
277 Disable support for the Jack Audio Connection Kit
278 (JACK).],
279 [config_jack_driver="$enableval"],
280 [config_jack_driver="yes"]
281 )
282 have_jack=0
283 if test "$config_jack_driver" = "yes"; then
284 PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
285 if test $have_jack = "1"; then
286 AC_SUBST(JACK_LIBS)
287 AC_SUBST(JACK_CFLAGS)
288 linuxsampler_save_LIBS=$LIBS
289 LIBS="$JACK_LIBS $LIBS"
290 AC_CHECK_FUNCS(jack_client_name_size jack_client_open)
291 LIBS=$linuxsampler_save_LIBS
292 have_audio_output_driver="true";
293 fi
294 else
295 echo "JACK support disabled by configure script parameter"
296 fi
297 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
298 AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
299 config_have_jack="no"
300 if test $have_jack = "1"; then
301 config_have_jack="yes"
302 fi
303
304 # JACK MIDI
305 have_jack_midi=0
306 if test $have_jack = "1"; then
307 linuxsampler_save_CFLAGS=$CFLAGS
308 linuxsampler_save_LIBS=$LIBS
309 CFLAGS="$JACK_CFLAGS $CFLAGS"
310 LIBS="$JACK_LIBS $LIBS"
311 AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
312 if test $have_jack_midi = "1"; then
313 AC_CHECK_FUNCS(jack_midi_get_event_count)
314 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
315 jack_midi_clear_buffer(0, 0);
316 ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
317 [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
318 have_midi_input_driver="true"
319 fi
320 CFLAGS=$linuxsampler_save_CFLAGS
321 LIBS=$linuxsampler_save_LIBS
322 fi
323 AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
324 AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
325 [Define to 1 if you have JACK with MIDI support installed.])
326 config_have_jack_midi="no"
327 if test $have_jack_midi = "1"; then
328 config_have_jack_midi="yes"
329 fi
330
331 # ARTS
332 AC_ARG_ENABLE(arts-driver,
333 [ --disable-arts-driver
334 Disable support for the Analogue Realtime System
335 (aRts).],
336 [config_arts_driver="$enableval"],
337 [config_arts_driver="yes"]
338 )
339 have_arts=0
340 if test "$config_arts_driver" = "yes"; then
341 m4_ifdef([m4_include(m4/arts.m4)],,
342 [sinclude([m4/arts.m4])])
343 AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
344 if test "$have_arts" = "1"; then
345 have_audio_output_driver="true"
346 fi
347 else
348 echo "ARTS support disabled by configure script parameter"
349 fi
350 AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
351 AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
352 config_have_arts="no"
353 if test $have_arts = "1"; then
354 config_have_arts="yes"
355 fi
356
357 # ASIO AUDIO (Win32)
358 AC_ARG_ENABLE(asiosdk-dir,
359 [ --enable-asiosdk-dir
360 Directory where the ASIO SDK is located, this automatically
361 enables the compilation of the ASIO audio output driver.],
362 [config_asiosdk_dir="${enableval}"],
363 [config_asiosdk_dir="."]
364 )
365 AC_SUBST(config_asiosdk_dir)
366
367 AC_ARG_ENABLE(asio-driver,
368 [ --disable-asio-driver
369 Disable support for the Windows ASIO driver.],
370 [config_asio_driver="$enableval"],
371 [config_asio_driver="yes"]
372 )
373 have_asio=0
374 ASIOSDK_BASEDIR=
375 if test "$config_asio_driver" = "yes"; then
376 asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
377 echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
378 if test -e $asiosdk_headerfile ; then
379 echo yes
380 have_asio=1
381 ASIOSDK_BASEDIR="$config_asiosdk_dir"
382 else
383 echo no
384 have_asio=0
385 fi
386 if test "$have_asio" = "1"; then
387 have_audio_output_driver="true"
388 fi
389 else
390 echo "Windows ASIO support disabled by configure script parameter"
391 fi
392 AC_SUBST(ASIOSDK_BASEDIR)
393 AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
394 AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
395 config_have_asio="no"
396 if test $have_asio = "1"; then
397 config_have_asio="yes"
398 fi
399
400 # MidiShare (Linux, OS X, Windows)
401 AC_ARG_ENABLE(midishare-driver,
402 [ --disable-midishare-driver
403 Disable support for the MidiShare system.],
404 [config_midishare_driver="$enableval"],
405 [config_midishare_driver="yes"]
406 )
407 have_midishare=0
408 if test "$config_midishare_driver" = "yes"; then
409 AC_CHECK_HEADER(MidiShare.h,
410 AC_CHECK_LIB(MidiShare, MidiCountEvs,
411 have_midishare=1,
412 have_midishare=0
413 )
414 ,
415 have_midishare=0
416 )
417 if test "$have_midishare" = "1"; then
418 have_midi_input_driver="true"
419 fi
420 else
421 echo "MidiShare support disabled by configure script parameter"
422 fi
423 AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
424 AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
425 config_have_midishare="no"
426 if test $have_midishare = "1"; then
427 config_have_midishare="yes"
428 fi
429
430 # CoreMIDI (OS X)
431 AC_ARG_ENABLE(coremidi-driver,
432 [ --disable-coremidi-driver
433 Disable support for the Apple CoreMIDI system.],
434 [config_coremidi_driver="$enableval"],
435 [config_coremidi_driver="yes"]
436 )
437 have_coremidi=0
438 if test "$config_coremidi_driver" = "yes"; then
439 AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
440 have_coremidi=1,
441 have_coremidi=0
442 )
443 if test "$have_coremidi" = "1"; then
444 have_midi_input_driver="true"
445 fi
446 else
447 echo "CoreMIDI support disabled by configure script parameter"
448 fi
449 AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
450 AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
451 config_have_coremidi="no"
452 if test $have_coremidi = "1"; then
453 config_have_coremidi="yes"
454 fi
455
456 # CoreAudio (OS X)
457 AC_ARG_ENABLE(coreaudio-driver,
458 [ --disable-coreaudio-driver
459 Disable support for the Apple CoreAudio system.],
460 [config_coreaudio_driver="$enableval"],
461 [config_coreaudio_driver="yes"]
462 )
463 have_coreaudio=0
464 if test "$config_coreaudio_driver" = "yes"; then
465 AC_CHECK_HEADER(CoreAudio/CoreAudio.h,
466 have_coreaudio=1,
467 have_coreaudio=0
468 )
469 if test "$have_coreaudio" = "1"; then
470 have_audio_output_driver="true"
471 fi
472 else
473 echo "CoreAudio support disabled by configure script parameter"
474 fi
475 AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1")
476 AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.])
477 config_have_coreaudio="no"
478 if test $have_coreaudio = "1"; then
479 config_have_coreaudio="yes"
480 fi
481
482 # MME MIDI (Win32)
483 AC_ARG_ENABLE(mmemidi-driver,
484 [ --disable-mmemidi-driver
485 Disable support for the Windows MME MIDI system.],
486 [config_mmemidi_driver="$enableval"],
487 [config_mmemidi_driver="yes"]
488 )
489 have_mmemidi=0
490 if test "$config_mmemidi_driver" = "yes"; then
491 AC_CHECK_HEADERS(mmsystem.h,
492 have_mmemidi=1,
493 have_mmemidi=0
494 )
495 if test "$have_mmemidi" = "1"; then
496 have_midi_input_driver="true"
497 fi
498 else
499 echo "MME MIDI support disabled by configure script parameter"
500 fi
501 AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
502 AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
503 config_have_mme="no"
504 if test $have_mmemidi = "1"; then
505 config_have_mme="yes"
506 fi
507
508 # DSSI
509 AC_CHECK_HEADERS(dssi.h,
510 config_have_dssi="yes",
511 config_have_dssi="no")
512 AM_CONDITIONAL(HAVE_DSSI, test $config_have_dssi = "yes")
513
514 # LV2
515 PKG_CHECK_MODULES(LV2, lv2,
516 [config_have_lv2="yes"
517 AC_DEFINE(HAVE_LV2_PACKAGE, 1,
518 [Define to 1 if you have the lv2 package installed.])],
519 [config_have_lv2="no"
520 PKG_CHECK_MODULES(LV2, lv2core, config_have_lv2="yes",
521 [AC_CHECK_HEADER(lv2.h, config_have_lv2="yes")])])
522
523 AC_SUBST(LV2_CFLAGS)
524 AC_SUBST(LV2_LIBS)
525 AM_CONDITIONAL(HAVE_LV2, test $config_have_lv2 = "yes")
526
527 # VST
528 AC_ARG_ENABLE(vstsdk-dir,
529 [ --enable-vstsdk-dir
530 Directory where the VST SDK is located.
531 This automatically enables the compilation
532 of the VST plugin.],
533 [VSTSDK_DIR="${enableval}"],
534 [VSTSDK_DIR=]
535 )
536 AC_SUBST(VSTSDK_DIR)
537 AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
538 config_have_vst="no"
539 if test "x$VSTSDK_DIR" != "x"; then
540 config_have_vst="yes"
541 fi
542
543 # AU
544 AC_CHECK_HEADERS(AudioUnit/AudioUnit.h,
545 config_have_au="yes",
546 config_have_au="no")
547 AM_CONDITIONAL(HAVE_AU, test $config_have_au = "yes")
548 AM_CONDITIONAL(HAVE_AUFLAGS, test "$AUFLAGS" != "")
549
550 if test $config_have_au = "yes" ; then
551 if test "x$DEVELOPER_EXTRAS_DIR" = "x" ; then
552 if test -d /Developer/Extras ; then
553 DEVELOPER_EXTRAS_DIR=/Developer/Extras
554 else
555 DEVELOPER_EXTRAS_DIR=/Developer/Examples
556 fi
557 fi
558 AC_SUBST(DEVELOPER_EXTRAS_DIR)
559 fi
560
561 if test "x$MAC_PLUGIN_INSTALL_DIR" = "x" ; then
562 MAC_PLUGIN_INSTALL_DIR=/Library/Audio/Plug-Ins
563 fi
564 AC_SUBST(MAC_PLUGIN_INSTALL_DIR)
565
566 # have we found at least one MIDI input and one audio output driver ?
567 if test "$have_midi_input_driver" = "false"; then
568 echo "No supported MIDI input system found!"
569 echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
570 echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
571 echo "If you think you have one of those available on your system, make sure you"
572 echo "also have the respective development (header) files installed."
573 exit -1;
574 fi
575 if test "$have_audio_output_driver" = "false"; then
576 echo "No supported audio output system found!"
577 echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
578 echo "driver at the moment!"
579 exit -1;
580 fi
581
582
583
584 ###########################################################################
585 # Checks for various DLL libraries
586
587 # Check presence of libgig
588 libgig_version="3.3.0"
589 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
590 if test "$HAVE_GIG" = "false"; then
591 echo "Required libgig version not found!"
592 echo "You need to have libgig version ${libgig_version} installed!"
593 exit -1;
594 else
595 echo "yes, found libgig $libgig_version"
596 fi
597 AC_SUBST(GIG_CFLAGS)
598 AC_SUBST(GIG_LIBS)
599
600 # SF2 Engine (requires libgig)
601 AC_ARG_ENABLE(sf2-engine,
602 [ --disable-sf2-engine
603 Disable compilation of the SF2 engine.
604 You need to have libgig installed.],
605 [config_sf2_engine="$enableval"],
606 [config_sf2_engine="yes"]
607 )
608 HAVE_SF2=0;
609 if test "$config_sf2_engine" = "yes"; then
610 HAVE_SF2=1
611 else
612 echo "SF2 engine disabled by configure script parameter"
613 fi
614 AM_CONDITIONAL(HAVE_SF2, test $HAVE_SF2 = 1)
615 AC_DEFINE_UNQUOTED(HAVE_SF2,$HAVE_SF2,[Define to 1 if you want SF2 engine and have libsf2 installed.])
616 config_have_sf2="no"
617 if test $HAVE_SF2 = "1"; then
618 config_have_sf2="yes"
619 fi
620
621 # Check presence of libsndfile
622 libsndfile_version="1.0"
623 PKG_CHECK_MODULES(SNDFILE, sndfile >= $libsndfile_version, HAVE_SNDFILE=true, HAVE_SNDFILE=false)
624 if test "$HAVE_SNDFILE" = "false"; then
625 echo "Required libsndfile version not found!"
626 echo "You need to have libsndfile version ${libsndfile_version} installed!"
627 exit -1;
628 else
629 echo "yes, found libsndfile $libsndfile_version"
630 fi
631 AC_SUBST(SNDFILE_CFLAGS)
632 AC_SUBST(SNDFILE_LIBS)
633
634 # Check for Vorbis support in libsndfile
635 linuxsampler_save_CFLAGS=$CFLAGS
636 CFLAGS="$SNDFILE_CFLAGS $CFLAGS"
637 AC_CHECK_DECLS([SF_FORMAT_VORBIS], [], [], [[#include <sndfile.h>]])
638
639 # Check for loop functionality in libsndfile
640 AC_CHECK_MEMBERS([SF_INSTRUMENT.loops],,
641 [AC_MSG_WARN([Your version of libsndfile does not support
642 reading of loop information. LinuxSampler will not be able to
643 extract loop information from sample files.])],
644 [#include <sndfile.h>])
645 CFLAGS=$linuxsampler_save_CFLAGS
646
647 # Instruments DB feature (requires SQLite 3.3)
648 AC_ARG_ENABLE(instruments-db,
649 [ --disable-instruments-db
650 Disable compilation of the sampler's instruments
651 database feature. You need to have SQLite 3.3
652 or younger installed for this feature.],
653 [config_instruments_db="$enableval"],
654 [config_instruments_db="yes"]
655 )
656 HAVE_SQLITE3=0;
657 if test "$config_instruments_db" = "yes"; then
658 # Check presence of sqlite3
659 sqlite_version="3.3"
660 PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
661 AC_SUBST(SQLITE3_LIBS)
662 AC_SUBST(SQLITE3_CFLAGS)
663 if test $HAVE_SQLITE3 = false; then
664 HAVE_SQLITE3=0
665 config_instruments_db="no"
666 echo "*** Required sqlite version not found!"
667 echo "*** You need to have sqlite version ${sqlite_version} or higher"
668 echo "*** for instruments database support to be enabled."
669 echo "*** Support for instruments DB will be disabled!"
670 else
671 HAVE_SQLITE3=1
672 fi
673 else
674 echo "Instruments DB feature disabled by configure script parameter"
675 fi
676 AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
677 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
678
679
680
681 ###########################################################################
682 # Handle Configuration Options
683
684 # TODO: should we use AC_ARG_VAR(variable, description) instead?
685
686 AC_ARG_ENABLE(asm,
687 [ --disable-asm
688 Enable hand-crafted assembly optimizations
689 (default=on). LinuxSampler provides CPU specific
690 assembly optimizations. This is currently limited
691 to just enter a fast (denormal) FPU mode on x86
692 platforms. There are currently no synthesis core
693 assembly optimizations anymore since LS 0.4.0],
694 [config_asm="$enableval"],
695 [config_asm="yes"]
696 )
697 if test "$config_asm" = "yes"; then
698 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
699 fi
700
701 AC_ARG_ENABLE(dev-mode,
702 [ --enable-dev-mode
703 Enable development mode (default=off). In that mode
704 we do some extra sanity checks here and there.
705 This helps to spot possible problems, but reduces
706 efficiency a bit],
707 [config_dev_mode="$enableval"],
708 [config_dev_mode="no"]
709 )
710 if test "$config_dev_mode" = "yes"; then
711 AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
712 fi
713
714 AC_ARG_ENABLE(debug-level,
715 [ --enable-debug-level
716 Specify verbosity of console messages (default=1).
717 The higher the value, the higher will be verbosity.
718 A value of 0 means no console output at all.
719 There's not really an upper limit but the usual
720 level of all messages is currently somewhere less
721 than 10.],
722 [config_debug_level="${enableval}"],
723 [config_debug_level="1"]
724 )
725 AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
726
727 AC_ARG_ENABLE(rt-exceptions,
728 [ --enable-rt-exceptions
729 Enable exceptions in the realtime thread
730 (default=no). If this is enabled, exceptions will
731 be thrown on critical errors in the realtime
732 context as well. Otherwise if disabled
733 segmentation faults will be forced by the
734 application on critical errors.],
735 [config_rt_exceptions="$enableval"],
736 [config_rt_exceptions="no"]
737 )
738 if test "$config_rt_exceptions" = "yes"; then
739 AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
740 fi
741
742 config_pthread_testcancel="$mac"
743 AC_ARG_ENABLE(pthread-testcancel,
744 [ --enable-pthread-testcancel
745 Enable pthread_testcancel() calls and avoid
746 asynchronous cancel of pthreads (default=yes
747 for Mac targets, no otherwise).],
748 [config_pthread_testcancel="$enableval"],
749 [])
750 if test "$config_pthread_testcancel" = "yes"; then
751 AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
752 fi
753
754 AC_ARG_ENABLE(preload-samples,
755 [ --enable-preload-samples
756 Due to seeking and latency issues with hard drives
757 we have to cache a small part of samples' head in
758 RAM (default=32768). The higher this value the
759 more memory will be occupied for each sample, but
760 the safer this will be in regards of possible
761 droputs. A 'good' value depends on the running
762 system and usage dependant factors.],
763 [config_preload_samples="${enableval}"],
764 [config_preload_samples="32768"]
765 )
766 AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
767
768 AC_ARG_ENABLE(max-pitch,
769 [ --enable-max-pitch
770 Specify the maximum allowed pitch value in octaves
771 (default=4). To lower memory usage you might want
772 set a smaller value.],
773 [config_max_pitch="${enableval}"],
774 [config_max_pitch="4"]
775 )
776 AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
777
778 AC_ARG_ENABLE(max-events,
779 [ --enable-max-events
780 Specify the maximum allowed amount of events to be
781 processed per fragment (default=1024).],
782 [config_max_events="${enableval}"],
783 [config_max_events="1024"]
784 )
785 AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
786
787 AC_ARG_ENABLE(eg-bottom,
788 [ --enable-eg-bottom
789 Bottom limit of envelope generators
790 (default=0.001). Certain kinds of curve types like
791 exponential curves converge against 0 but never
792 reach 0. So we have to define a certain low value
793 after which we should consider all smaller values
794 to be 'almost zero'. The smaller this value, the
795 longer will voices survive in EG's release stage
796 and thus waste voices. If this value is too high
797 will cause click sounds though.],
798 [config_eg_bottom="${enableval}"],
799 [config_eg_bottom="0.001"]
800 )
801 AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
802
803 AC_ARG_ENABLE(eg-min-release-time,
804 [ --enable-eg-min-release-time
805 Specify the lowest allowed release time in seconds
806 (default=0.0025). This value will also be used to
807 ramp down voices on voice stealing. This value
808 should always be less than the period time of the
809 used audio driver, as in case of voice stealing
810 the killed voice needs to be completely ramped
811 down in the same fragment.],
812 [config_eg_min_release_time="${enableval}"],
813 [config_eg_min_release_time="0.0025"]
814 )
815 AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
816
817 AC_ARG_ENABLE(refill-streams,
818 [ --enable-refill-streams
819 Number of streams that should be refilled in each
820 disk thread cycle (default=4).],
821 [config_refill_streams="${enableval}"],
822 [config_refill_streams="4"]
823 )
824 AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
825
826 AC_ARG_ENABLE(stream-min-refill,
827 [ --enable-stream-min-refill
828 Minimum refill size for disk streams (default=1024).
829 The disk thread will go to sleep for a while if no
830 stream had to be refilled more than this value in
831 a disk thread cycle.],
832 [config_stream_min_refill="${enableval}"],
833 [config_stream_min_refill="1024"]
834 )
835 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
836
837 AC_ARG_ENABLE(stream-max-refill,
838 [ --enable-stream-max-refill
839 Maximum refill size for disk streams
840 (default=65536). The disk thread will refill
841 each stream only by a size of this value per
842 disk thread cycle.],
843 [config_stream_max_refill="${enableval}"],
844 [config_stream_max_refill="65536"]
845 )
846 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
847
848 AC_ARG_ENABLE(stream-size,
849 [ --enable-stream-size
850 Size of each stream's ring buffer in sample points
851 (default=262144).],
852 [config_stream_size="${enableval}"],
853 [config_stream_size="262144"]
854 )
855 AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
856
857 AC_ARG_ENABLE(max-streams,
858 [ --enable-max-streams
859 Initial maximum amount of disk streams
860 (default=90). This value can be changed at
861 runtime. It should always be higher than the
862 maximum amount of voices.],
863 [config_max_streams="${enableval}"],
864 [config_max_streams="90"]
865 )
866 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
867
868 AC_ARG_ENABLE(max-voices,
869 [ --enable-max-voices
870 Initial maximum amount of voices (default=64).
871 This value can be changed at runtime. It should
872 always be lower than the maximum amount of disk
873 streams.],
874 [config_max_voices="${enableval}"],
875 [config_max_voices="64"]
876 )
877 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
878
879 AC_ARG_ENABLE(subfragment-size,
880 [ --enable-subfragment-size
881 Every audio fragment will be splitted into
882 subfragments. Where each subfragment renders
883 audio with constant synthesis parameters. This is
884 done for efficiency reasons. This parameter
885 defines the default size of a subfragment in
886 sample points. A large value means less CPU time
887 whereas a low value means better audio quality
888 (default=32).],
889 [config_subfragment_size="${enableval}"],
890 [config_subfragment_size="32"]
891 )
892 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
893
894 AC_ARG_ENABLE(global-attenuation-default,
895 [ --enable-global-attenuation-default
896 To prevent clipping all samples will be lowered
897 in amplitude by this given default factor (can
898 be overridden at runtime).
899 (default=0.35)],
900 [config_global_attenuation_default="${enableval}"],
901 [config_global_attenuation_default="0.35"]
902 )
903 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
904
905 AC_ARG_ENABLE(voice-steal-algo,
906 [ --enable-voice-steal-algo
907 Voice stealing algorithm to be used. Currently
908 available options:
909 none:
910 Disable voice stealing completely.
911 oldestvoiceonkey (default):
912 Try to kill a voice on the same key first,
913 if no success, proceed with the oldest key.
914 oldestkey:
915 Try to kill a voice from the oldest active
916 key.],
917 [ if test ! "(" "${enableval}" = "none" \
918 -o "${enableval}" = "oldestvoiceonkey" \
919 -o "${enableval}" = "oldestkey" ")" ; then
920 AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
921 else
922 config_voice_steal_algo="${enableval}"
923 fi
924 ],
925 [config_voice_steal_algo="oldestvoiceonkey"]
926 )
927 AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
928
929 AC_ARG_ENABLE(sysex-buffer-size,
930 [ --enable-sysex-buffer-size
931 System Exclusive Message buffer size in kB
932 (default=2048).],
933 [config_sysex_buffer_size="${enableval}"],
934 [config_sysex_buffer_size="2048"]
935 )
936 AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
937
938 AC_ARG_ENABLE(force-filter,
939 [ --enable-force-filter
940 If enabled will force filter to be used even if
941 no usage was define in instrument patch files.
942 (default=no).],
943 [config_force_filter="$enableval"],
944 [config_force_filter="no"]
945 )
946 if test "$config_force_filter" = "yes"; then
947 AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
948 fi
949
950 AC_ARG_ENABLE(filter-cutoff-min,
951 [ --enable-filter-cutoff-min
952 Minimum filter cutoff frequency in Hz
953 (default=100.0).],
954 [config_filter_cutoff_min="${enableval}"],
955 [config_filter_cutoff_min="100.0"]
956 )
957 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
958
959 AC_ARG_ENABLE(filter-cutoff-max,
960 [ --enable-filter-cutoff-max
961 Maximum filter cutoff frequency in Hz
962 (default=10000.0).],
963 [config_filter_cutoff_max="${enableval}"],
964 [config_filter_cutoff_max="10000.0"]
965 )
966 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
967
968 AC_ARG_ENABLE(override-cutoff-ctrl,
969 [ --enable-override-cutoff-ctrl
970 Override filter cutoff MIDI controller (default=no).
971 Note: you have to define the MIDI controller number
972 here, it's not a boolean parameter type! If this
973 option is used, controller number given by
974 instrument patch will be ignored and instead this
975 supplied value will be used.],
976 [config_override_cutoff_ctrl="${enableval}"],
977 [config_override_cutoff_ctrl="no"]
978 )
979 if test ! "$config_override_cutoff_ctrl" = "no"; then
980 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
981 fi
982
983 AC_ARG_ENABLE(override-resonance-ctrl,
984 [ --enable-override-resonance-ctrl
985 Override filter resonance MIDI controller
986 (default=no). Note: you have to define the MIDI
987 controller number here, it's not a boolean
988 parameter type! If this option is used, controller
989 number given by instrument patch will be ignored
990 and instead this supplied value will be used.],
991 [config_override_resonance_ctrl="${enableval}"],
992 [config_override_resonance_ctrl="no"]
993 )
994 if test ! "$config_override_resonance_ctrl" = "no"; then
995 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
996 fi
997
998 AC_ARG_ENABLE(override-filter-type,
999 [ --enable-override-filter-type
1000 Override filter type (default=no). Options:
1001 hp: for highpass
1002 bp: for bandpass
1003 br: for bandreject
1004 lp: for lowpass
1005 lpt: for lowpass turbo],
1006 [ if test "${enableval}" = "hp" ; then
1007 config_override_filter_type="::gig::vcf_type_highpass"
1008 elif test "${enableval}" = "bp" ; then
1009 config_override_filter_type="::gig::vcf_type_bandpass"
1010 elif test "${enableval}" = "br" ; then
1011 config_override_filter_type="::gig::vcf_type_bandreject"
1012 elif test "${enableval}" = "lp" ; then
1013 config_override_filter_type="::gig::vcf_type_lowpass"
1014 elif test "${enableval}" = "lpt" ; then
1015 config_override_filter_type="::gig::vcf_type_lowpassturbo"
1016 elif test ! "${enableval}" = "no"; then
1017 AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
1018 fi
1019 ],
1020 [config_override_filter_type="no"]
1021 )
1022 if test ! "$config_override_filter_type" = "no"; then
1023 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
1024 fi
1025
1026 AC_ARG_ENABLE(gs-checksum,
1027 [ --enable-gs-checksum
1028 Enable Roland General Synth SysEx checksum check
1029 (default=no). If this is enabled, all GS SysEx
1030 messages which do not provide a correct checksum
1031 will be ignored. This is disabled by default as
1032 not all devices honor GS checksums.],
1033 [config_assert_gs_sysex_checksum="$enableval"],
1034 [config_assert_gs_sysex_checksum="no"]
1035 )
1036 if test "config_assert_gs_sysex_checksum" = "yes"; then
1037 AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
1038 fi
1039
1040 AC_ARG_ENABLE(portamento-time-min,
1041 [ --enable-portamento-time-min
1042 Minimum Portamento time in seconds
1043 (default=0.1).],
1044 [config_portamento_time_min="${enableval}"],
1045 [config_portamento_time_min="0.1"]
1046 )
1047 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
1048
1049 AC_ARG_ENABLE(portamento-time-max,
1050 [ --enable-portamento-time-max
1051 Maximum Portamento time in seconds
1052 (default=32).],
1053 [config_portamento_time_max="${enableval}"],
1054 [config_portamento_time_max="32"]
1055 )
1056 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
1057
1058 AC_ARG_ENABLE(portamento-time-default,
1059 [ --enable-portamento-time-default
1060 Default Portamento time in seconds
1061 (default=1).],
1062 [config_portamento_time_default="${enableval}"],
1063 [config_portamento_time_default="1"]
1064 )
1065 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
1066
1067 AC_ARG_ENABLE(signed-triang-algo,
1068 [ --enable-signed-triang-algo
1069 Signed triangular wave algorithm to be used (e.g. for LFOs).
1070 Currently available options:
1071 intmath:
1072 Uses integer math without any branch will then be
1073 converted to floating point value for each sample point.
1074 This int->float conversion might hurt on some systems.
1075 intmathabs:
1076 Similar to intmath but uses abs() function.
1077 Depending on compiler and platrofm this could
1078 perform better than integer math as it avoids
1079 an extra integer multiply instruction.
1080 diharmonic:
1081 The triangular wave will be approximated by adding two
1082 sinusoidials. This solution might especially hurt on
1083 systems with weak floating point unit.
1084 benchmark (default):
1085 This is not an algorithm. Use this option if the
1086 appropriate algorithm should be automatically
1087 chosen by the configure script by performing a
1088 benchmark between the algorithms mentioned above.
1089 This will NOT work for cross compilation!],
1090 [ if test ! "(" "${enableval}" = "intmath" \
1091 -o "${enableval}" = "intmathabs" \
1092 -o "${enableval}" = "diharmonic" ")" ; then
1093 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
1094 else
1095 config_signed_triang_algo="${enableval}"
1096 fi
1097 ],
1098 [config_signed_triang_algo="benchmark"]
1099 )
1100
1101 AC_ARG_ENABLE(unsigned-triang-algo,
1102 [ --enable-unsigned-triang-algo
1103 Unsigned triangular wave algorithm to be used (e.g. for LFOs).
1104 Currently available options:
1105 intmath:
1106 Uses integer math without any branch will then be
1107 converted to floating point value for each sample point.
1108 This int->float conversion might hurt on some systems.
1109 intmathabs:
1110 Similar to intmath but uses abs() function.
1111 Depending on compiler and platrofm this could
1112 perform better than integer math as it avoids
1113 an extra integer multiply instruction.
1114 diharmonic:
1115 The triangular wave will be approximated by adding two
1116 sinusoidials. This solution might especially hurt on
1117 systems with weak floating point unit.
1118 benchmark (default):
1119 This is not an algorithm. Use this option if the
1120 appropriate algorithm should be automatically
1121 chosen by the configure script by performing a
1122 benchmark between the algorithms mentioned above.
1123 This will NOT work for cross compilation!],
1124 [ if test ! "(" "${enableval}" = "intmath" \
1125 -o "${enableval}" = "intmathabs" \
1126 -o "${enableval}" = "diharmonic" ")" ; then
1127 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
1128 else
1129 config_unsigned_triang_algo="${enableval}"
1130 fi
1131 ],
1132 [config_unsigned_triang_algo="benchmark"]
1133 )
1134
1135 AC_ARG_ENABLE(process-muted-channels,
1136 [ --enable-process-muted-channels
1137 Enable processing of muted channels (default=no).
1138 In that mode all MIDI events in the muted channels
1139 will be processed. This will provide information
1140 about the active voices in the muted channels and
1141 will not discard notes, triggered in mute mode,
1142 when the channel is unmuted. But also will reduce
1143 the efficiency.],
1144 [config_process_muted_channels="$enableval"],
1145 [config_process_muted_channels="no"]
1146 )
1147 if test "$config_process_muted_channels" = "yes"; then
1148 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
1149 fi
1150
1151 AC_ARG_ENABLE(process-all-notes-off,
1152 [ --disable-process-all-notes-off
1153 Disable interpretation of All-Notes-Off MIDI
1154 messages (default=on). By default LS will release
1155 all voices whenever it receives an All-Notes-Off
1156 MIDI message. You can disable this behavior, so
1157 that LS simply ignores such messages.],
1158 [config_process_all_notes_off="$enableval"],
1159 [config_process_all_notes_off="yes"]
1160 )
1161 if test "$config_process_all_notes_off" = "yes"; then
1162 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
1163 fi
1164
1165 AC_ARG_ENABLE(interpolate-volume,
1166 [ --disable-interpolate-volume
1167 Disable interpolation of volume modulation
1168 (default=on). With this enabled, the volume changes
1169 generated by for example the envelope generator
1170 will be smoother, minimizing the risk for audio
1171 clicks. Disable it to reduce CPU usage.],
1172 [config_interpolate_volume="$enableval"],
1173 [config_interpolate_volume="yes"]
1174 )
1175 if test "$config_interpolate_volume" = "yes"; then
1176 AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
1177 fi
1178
1179 AC_ARG_ENABLE(master-volume-sysex-by-port,
1180 [ --enable-master-volume-sysex-by-port
1181 Whether global volume sysex message should be
1182 applied globally to the whole sampler or only to
1183 the sampler channels connected to the same MIDI
1184 input port on which the sysex message arrived on.
1185 By default global volume sysex messages apply
1186 globally to the whole sampler, since many MIDI
1187 devices behave that way.],
1188 [config_master_volume_sysex_by_port="$enableval"],
1189 [config_master_volume_sysex_by_port="no"]
1190 )
1191 if test "$config_master_volume_sysex_by_port" = "yes"; then
1192 AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
1193 fi
1194
1195 AC_ARG_ENABLE(plugin-dir,
1196 [ --enable-plugin-dir
1197 Directory where the sampler shall look for potential plugins,
1198 that is 3rd party shared libraries that should be loaded by
1199 the sampler on startup. By default the sampler will search
1200 for plugins in the subdirectory "plugins" below its own
1201 library directory.
1202 (i.e. /usr/local/lib/linuxsampler/plugins)],
1203 [config_plugin_dir="${enableval}"],
1204 [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1205 )
1206 AC_SUBST(config_plugin_dir)
1207
1208 AC_ARG_ENABLE(default-instruments-db-location,
1209 [ --enable-default-instruments-db-location
1210 Only when instruments DB feature is enabled: file name
1211 which shall be taken as default location of the
1212 instruments DB file. This location can still be
1213 overridden at runtime with a command line switch.
1214 (default: /var/lib/linuxsampler/instruments.db)],
1215 [config_default_instruments_db_file="${enableval}"],
1216 [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1217 )
1218 AC_DEFINE_UNQUOTED(
1219 CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1220 "$config_default_instruments_db_file",
1221 [Only when instruments DB feature is enabled: default location of the DB file.]
1222 )
1223 AC_SUBST(config_default_instruments_db_file)
1224
1225
1226 ###########################################################################
1227 # Automatic Benchmarks (to detect the best algorithms for the system)
1228
1229 AC_LANG_SAVE
1230
1231 if test "$config_signed_triang_algo" = "benchmark"; then
1232 echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1233 AC_LANG_CPLUSPLUS
1234 AC_TRY_RUN([
1235 #define SIGNED 1
1236 #define SILENT 1
1237 #include "${srcdir}/benchmarks/triang.cpp"
1238 ],
1239 triang_signed=0,
1240 triang_signed=$?,
1241 triang_signed=0
1242 )
1243 if test "$triang_signed" = "2"; then
1244 config_signed_triang_algo="intmath"
1245 echo "integer math"
1246 elif test "$triang_signed" = "3"; then
1247 config_signed_triang_algo="diharmonic"
1248 echo "di harmonics"
1249 elif test "$triang_signed" = "5"; then
1250 config_signed_triang_algo="intmathabs"
1251 echo "integer math using abs()"
1252 else
1253 echo "Benchmark of signed triangular wave algorithms failed!"
1254 echo "Maybe you are doing cross compilation? In that case you have to select"
1255 echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1256 echo "Call './configure --help' for further information or read configure.in."
1257 exit -1;
1258 fi
1259 else
1260 case "$config_signed_triang_algo" in
1261 intmath)
1262 triang_signed=2 ;;
1263 diharmonic)
1264 triang_signed=3 ;;
1265 intmathabs)
1266 triang_signed=5 ;;
1267 esac
1268 fi
1269 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1270
1271 if test "$config_unsigned_triang_algo" = "benchmark"; then
1272 echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1273 AC_LANG_CPLUSPLUS
1274 AC_TRY_RUN([
1275 #define SIGNED 0
1276 #define SILENT 1
1277 #include "${srcdir}/benchmarks/triang.cpp"
1278 ],
1279 triang_unsigned=0,
1280 triang_unsigned=$?,
1281 triang_unsigned=0
1282 )
1283 if test "$triang_unsigned" = "2"; then
1284 config_unsigned_triang_algo="intmath"
1285 echo "integer math"
1286 elif test "$triang_unsigned" = "3"; then
1287 config_unsigned_triang_algo="diharmonic"
1288 echo "di harmonics"
1289 elif test "$triang_unsigned" = "5"; then
1290 config_unsigned_triang_algo="intmathabs"
1291 echo "integer math using abs()"
1292 else
1293 echo "Benchmark of unsigned triangular wave algorithms failed!"
1294 echo "Maybe you are doing cross compilation? In that case you have to select"
1295 echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1296 echo "Call './configure --help' for further information or read configure.in."
1297 exit -1;
1298 fi
1299 else
1300 case "$config_unsigned_triang_algo" in
1301 intmath)
1302 triang_unsigned=2 ;;
1303 diharmonic)
1304 triang_unsigned=3 ;;
1305 intmathabs)
1306 triang_unsigned=5 ;;
1307 esac
1308 fi
1309 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1310
1311 AC_LANG_RESTORE
1312
1313
1314 ###########################################################################
1315 # Create Build Files
1316
1317 AM_CONFIG_HEADER(config.h)
1318 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1319
1320 AC_LANG_CPLUSPLUS
1321
1322 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1323 # this, the dlfcn.h check in am_prog_libtool may fail.
1324 AC_CHECK_HEADER(stdlib.h)
1325
1326 AC_OUTPUT( \
1327 Makefile \
1328 man/Makefile \
1329 man/linuxsampler.1 \
1330 src/Makefile \
1331 src/db/Makefile \
1332 src/network/Makefile \
1333 src/engines/Makefile \
1334 src/engines/gig/Makefile \
1335 src/engines/sf2/Makefile \
1336 src/engines/sfz/Makefile \
1337 src/engines/common/Makefile \
1338 src/effects/Makefile \
1339 src/common/Makefile \
1340 src/testcases/Makefile \
1341 src/drivers/Makefile \
1342 src/drivers/audio/Makefile \
1343 src/drivers/midi/Makefile \
1344 src/plugins/Makefile \
1345 src/hostplugins/Makefile \
1346 src/hostplugins/dssi/Makefile \
1347 src/hostplugins/lv2/Makefile \
1348 src/hostplugins/vst/Makefile \
1349 src/hostplugins/au/Makefile \
1350 linuxsampler.spec \
1351 debian/Makefile \
1352 Artwork/Makefile \
1353 scripts/Makefile \
1354 osx/Makefile \
1355 osx/linuxsampler.xcodeproj/Makefile \
1356 Documentation/Makefile \
1357 Documentation/Engines/Makefile \
1358 Documentation/Engines/gig/Makefile \
1359 linuxsampler.pc \
1360 Doxyfile \
1361 )
1362
1363 # resolve all nested variables in '${config_plugin_dir}'
1364 # (merely for providing a human readable summary below)
1365 while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1366 config_plugin_dir=`eval echo ${config_plugin_dir}`
1367 done
1368
1369
1370 ###########################################################################
1371 # Output All Configuration Options
1372
1373 echo ""
1374 echo "#####################################################################"
1375 echo "# LinuxSampler Configuration #"
1376 echo "#-------------------------------------------------------------------#"
1377 echo "# Release Version: ${LINUXSAMPLER_RELEASE_MAJOR}.${LINUXSAMPLER_RELEASE_MINOR}.${LINUXSAMPLER_RELEASE_BUILD}"
1378 echo "# LSCP Version: ${LSCP_RELEASE_MAJOR}.${LSCP_RELEASE_MINOR}"
1379 echo "#-------------------------------------------------------------------"
1380 echo "# Assembly Optimizations: ${config_asm}"
1381 echo "# Development Mode: ${config_dev_mode}"
1382 echo "# Debug Level: ${config_debug_level}"
1383 echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1384 echo "# Preload Samples: ${config_preload_samples}"
1385 echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1386 echo "# Maximum Events: ${config_max_events}"
1387 echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1388 echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1389 echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1390 echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1391 echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1392 echo "# Stream Size: ${config_stream_size}"
1393 echo "# Default Maximum Disk Streams: ${config_max_streams}"
1394 echo "# Default Maximum Voices: ${config_max_voices}"
1395 echo "# Default Subfragment Size: ${config_subfragment_size}"
1396 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1397 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1398 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1399 echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1400 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1401 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1402 echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1403 echo "# Default Portamento Time: ${config_portamento_time_default} s"
1404 echo "# Force Filter Usage: ${config_force_filter}"
1405 echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1406 echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1407 echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1408 echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1409 echo "# Override Filter Type: ${config_override_filter_type}"
1410 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1411 echo "# Process Muted Channels: ${config_process_muted_channels}"
1412 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1413 echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
1414 echo "# Interpolate Volume: ${config_interpolate_volume}"
1415 echo "# Instruments database support: ${config_instruments_db}"
1416 if test "$config_instruments_db" = "yes"; then
1417 echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1418 fi
1419 echo "# Plugin Path: ${config_plugin_dir}"
1420 echo "#-------------------------------------------------------------------"
1421 echo "# MIDI Input Drivers:"
1422 echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack_midi}, CoreMIDI: ${config_have_coremidi}, MME: ${config_have_mme}, MidiShare: ${config_have_midishare}"
1423 echo "#-------------------------------------------------------------------"
1424 echo "# Audio Output Drivers:"
1425 echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack}, ARTS: ${config_have_arts}, CoreAudio: ${config_have_coreaudio}, ASIO: ${config_have_asio}"
1426 echo "#-------------------------------------------------------------------"
1427 echo "# Sampler Engines:"
1428 echo "# GIG: yes, SF2: ${config_have_sf2}, SFZ: yes"
1429 echo "#-------------------------------------------------------------------"
1430 echo "# Effect plugin systems for internal effects:"
1431 echo "# LADSPA: yes"
1432 echo "#-------------------------------------------------------------------"
1433 echo "# Building sampler as plugin for following host standards:"
1434 echo "# DSSI: ${config_have_dssi}, LV2: ${config_have_lv2}, VST: ${config_have_vst}, AU: ${config_have_au}"
1435 echo "#-------------------------------------------------------------------#"
1436 echo "# Read './configure --help' or file 'configure.in' for details. #"
1437 echo "#####################################################################"
1438 echo ""
1439 echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1440 echo ""

  ViewVC Help
Powered by ViewVC