/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Contents of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 2356 - (show annotations) (download)
Sun Jul 8 14:44:47 2012 UTC (11 years, 8 months ago) by persson
Original Path: linuxsampler/trunk/configure.in
File size: 57591 byte(s)
* LV2: use urid and atom extensions instead of deprecated uri-map and
  event
* LV2: lv2 package 1.0 is now required to build the LV2 plugin
* LV2: changed number of output channels to 16 stereo, just like the
  VST and AU plugins

1 AC_INIT(configure.in)
2
3 #------------------------------------------------------------------------------------
4 # LinuxSampler's / liblinuxsampler's "official" release version:
5
6 LINUXSAMPLER_RELEASE_MAJOR=1
7 LINUXSAMPLER_RELEASE_MINOR=0
8 LINUXSAMPLER_RELEASE_BUILD=0.svn18
9
10 #------------------------------------------------------------------------------------
11 # The following is the libtool / shared library version. This doesn't have to
12 # do anything with the release version. It MUST conform to the following rules:
13 #
14 # 1. Start with version information of `0:0:0' for each libtool library.
15 # 2. Update the version information only immediately before a public release of
16 # your software. More frequent updates are unnecessary, and only guarantee
17 # that the current interface number gets larger faster.
18 # 3. If the library source code has changed at all since the last update, then
19 # increment revision (`c:r:a' becomes `c:r+1:a').
20 # 4. If any interfaces have been added, removed, or changed since the last update,
21 # increment current, and set revision to 0.
22 # 5. If any interfaces have been added since the last public release, then increment
23 # age.
24 # 6. If any interfaces have been removed since the last public release, then set age
25 # to 0.
26
27 LIBLINUXSAMPLER_LT_CURRENT=3
28 LIBLINUXSAMPLER_LT_REVISION=0
29 LIBLINUXSAMPLER_LT_AGE=0
30 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31
32 #------------------------------------------------------------------------------------
33 # the LSCP specification version this LinuSampler release complies with:
34
35 LSCP_RELEASE_MAJOR=1
36 LSCP_RELEASE_MINOR=5
37
38 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40
41 AC_PROG_CXX
42 AC_LIBTOOL_WIN32_DLL
43 AM_PROG_LIBTOOL
44
45 AC_SUBST(SHLIB_VERSION_ARG)
46 AC_SUBST(SHARED_VERSION_INFO)
47
48 AC_C_BIGENDIAN
49 AC_CANONICAL_HOST
50
51 PKG_PROG_PKG_CONFIG
52
53 ###########################################################################
54 # General Checks
55
56 AM_CONDITIONAL(CROSS_COMPILING, test $cross_compiling = yes)
57
58 AC_MSG_CHECKING([whether x86 architecture])
59 def_arch_x86=0
60 case $host_cpu in
61 "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
62 echo "yes"
63 def_arch_x86=1;;
64 *)
65 echo "no";;
66 esac
67 AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
68
69 # determine the right gcc switch for CPU specific optimizations
70 # (only if the user did not provide one)
71 CXX_CPU_SWITCH=
72 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
73 if test "$def_arch_x86" = 1 -a "$host_cpu" != "x86_64"; then
74 CXX_CPU_SWITCH="-march=$host_cpu"
75 elif test "$target_cpu" = "ppc"; then
76 CXX_CPU_SWITCH="-arch=$host_cpu"
77 fi
78 fi
79 AC_SUBST([CXX_CPU_SWITCH])
80
81 mac=no
82 linux=no
83 case "$host" in
84 *-*-darwin*)
85 mac=yes
86 ;;
87 *-*-linux*)
88 linux=yes
89 ;;
90 esac
91 AM_CONDITIONAL(LINUX, test "$linux" = yes)
92 AM_CONDITIONAL(MAC, test "$mac" = yes)
93
94 # check if we're on MS Windows
95 AC_CHECK_HEADERS(
96 mmsystem.h,
97 have_windows=1,
98 have_windows=0,
99 [#include <windef.h>]
100 )
101 AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
102
103 AC_MSG_CHECKING([whether UNIX98 compatible])
104 AC_LANG_SAVE
105 AC_LANG_C
106 AC_TRY_RUN([
107 #ifndef _GNU_SOURCE
108 #define _GNU_SOURCE 1
109 #endif
110 #include <features.h>
111 void main(void) {
112 #if _XOPEN_SOURCE >= 500
113 exit(0); /* UNIX98 compatible */
114 #else
115 exit(-1); /* not UNIX98 compatible */
116 #endif
117 }
118 ],
119 have_unix98="yes",
120 have_unix98="no",
121 have_unix98="no"
122 )
123 AC_LANG_RESTORE
124 AC_MSG_RESULT([$have_unix98])
125 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
126 if test "x$HAVE_UNIX98" = "x"; then
127 echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
128 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
129 echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
130 echo "have a UNIX98 compatible system."
131 exit -1;
132 fi
133 fi
134
135 # check for <features.h>
136 AC_CHECK_HEADERS(features.h)
137
138 # test for POSIX thread library
139 m4_ifdef([m4_include(m4/pthread.m4)],,
140 [sinclude([m4/pthread.m4])])
141 ACX_PTHREAD
142 LIBS="$PTHREAD_LIBS $LIBS"
143 CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
144 CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
145 CC="$PTHREAD_CC"
146
147 # check for a bug in NPTL-enabled glibc
148 # (see Gentoo bug report #194076)
149 AC_ARG_ENABLE(nptl-bug-check,
150 [ --disable-nptl-bug-check
151 Disable check for a bug in certain NPTL-enabled
152 glibc versions that caused crashs.],
153 [config_check_nptl_bug="$enableval"],
154 [config_check_nptl_bug="yes"]
155 )
156 if test "$config_check_nptl_bug" = "yes"; then
157 m4_ifdef([m4_include(m4/nptl_bug.m4)],,
158 [sinclude([m4/nptl_bug.m4])])
159 ACX_NPTL_GLIBC_BUG([
160 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
161 echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
162 echo "probably crash due to this. Please report us the system you are"
163 echo "using and/or file a bug report to the bug tracking system of"
164 echo "your distribution."
165 echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
166 echo "well, you can try to circumvent this problem for now by setting"
167 echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
168 echo "should cause this test to pass."
169 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
170 AC_MSG_ERROR([possibly NPTL glibc bug detected])
171 ])
172 else
173 echo "NPTL glibc bug check disabled"
174 fi
175
176 # FIXME: this is actually a dependency of libgig, not of LS directly, why
177 # isn't it hidden by libgig?
178 AC_CHECK_HEADERS(uuid/uuid.h)
179 AC_SEARCH_LIBS(uuid_generate, uuid)
180
181
182
183 ###########################################################################
184 # Checks for available audio and MIDI systems / drivers
185 # (we throw an error if there's not at least one system for audio output and MIDI input available)
186
187 have_midi_input_driver="false"
188 have_audio_output_driver="false"
189
190 # ALSA
191 AC_ARG_ENABLE(alsa-driver,
192 [ --disable-alsa-driver
193 Disable support for the Advanced Linux Sound
194 Architecture (ALSA).],
195 [config_alsa_driver="$enableval"],
196 [config_alsa_driver="yes"]
197 )
198 have_alsa=0
199 if test "$config_alsa_driver" = "yes"; then
200 AC_CHECK_HEADER(alsa/asoundlib.h,
201 AC_CHECK_LIB(asound, main,
202 have_alsa=1
203 ,
204 have_alsa=0
205 )
206 ,
207 have_alsa=0
208 )
209 if test "$have_alsa" = "1"; then
210 have_midi_input_driver="true"
211 have_audio_output_driver="true";
212 fi
213
214 echo -n "checking Alsa version... "
215 AC_LANG_SAVE
216 AC_LANG_C
217 AC_TRY_RUN([
218 #include <alsa/asoundlib.h>
219 void main(void) {
220 /* ensure backward compatibility */
221 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
222 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
223 #endif
224 exit(SND_LIB_MAJOR);
225 }
226 ],
227 alsa_major=0,
228 alsa_major=$?,
229 alsa_major=0
230 )
231 AC_TRY_RUN([
232 #include <alsa/asoundlib.h>
233 void main(void) {
234 /* ensure backward compatibility */
235 #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
236 #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
237 #endif
238 exit(SND_LIB_MINOR);
239 }
240 ],
241 alsa_minor=0,
242 alsa_minor=$?,
243 alsa_minor=0
244 )
245 AC_TRY_RUN([
246 #include <alsa/asoundlib.h>
247 void main(void) {
248 /* ensure backward compatibility */
249 #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
250 #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
251 #endif
252 exit(SND_LIB_SUBMINOR);
253 }
254 ],
255 alsa_subminor=0,
256 alsa_subminor=$?,
257 alsa_subminor=0
258 )
259 AC_LANG_RESTORE
260 echo "$alsa_major.$alsa_minor.$alsa_subminor";
261 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
262 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
263 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
264 else
265 echo "ALSA support disabled by configure script parameter"
266 fi
267 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
268 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
269 config_have_alsa="no"
270 if test $have_alsa = "1"; then
271 config_have_alsa="yes"
272 fi
273
274 # JACK
275 AC_ARG_ENABLE(jack-driver,
276 [ --disable-jack-driver
277 Disable support for the Jack Audio Connection Kit
278 (JACK).],
279 [config_jack_driver="$enableval"],
280 [config_jack_driver="yes"]
281 )
282 have_jack=0
283 if test "$config_jack_driver" = "yes"; then
284 PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
285 if test $have_jack = "1"; then
286 AC_SUBST(JACK_LIBS)
287 AC_SUBST(JACK_CFLAGS)
288 linuxsampler_save_LIBS=$LIBS
289 LIBS="$JACK_LIBS $LIBS"
290 AC_CHECK_FUNCS(jack_client_name_size jack_client_open)
291 LIBS=$linuxsampler_save_LIBS
292 have_audio_output_driver="true";
293 fi
294 else
295 echo "JACK support disabled by configure script parameter"
296 fi
297 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
298 AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
299 config_have_jack="no"
300 if test $have_jack = "1"; then
301 config_have_jack="yes"
302 fi
303
304 # JACK MIDI
305 have_jack_midi=0
306 if test $have_jack = "1"; then
307 linuxsampler_save_CFLAGS=$CFLAGS
308 linuxsampler_save_LIBS=$LIBS
309 CFLAGS="$JACK_CFLAGS $CFLAGS"
310 LIBS="$JACK_LIBS $LIBS"
311 AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
312 if test $have_jack_midi = "1"; then
313 AC_CHECK_FUNCS(jack_midi_get_event_count)
314 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
315 jack_midi_clear_buffer(0, 0);
316 ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
317 [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
318 have_midi_input_driver="true"
319 fi
320 CFLAGS=$linuxsampler_save_CFLAGS
321 LIBS=$linuxsampler_save_LIBS
322 fi
323 AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
324 AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
325 [Define to 1 if you have JACK with MIDI support installed.])
326 config_have_jack_midi="no"
327 if test $have_jack_midi = "1"; then
328 config_have_jack_midi="yes"
329 fi
330
331 # ARTS
332 AC_ARG_ENABLE(arts-driver,
333 [ --disable-arts-driver
334 Disable support for the Analogue Realtime System
335 (aRts).],
336 [config_arts_driver="$enableval"],
337 [config_arts_driver="yes"]
338 )
339 have_arts=0
340 if test "$config_arts_driver" = "yes"; then
341 m4_ifdef([m4_include(m4/arts.m4)],,
342 [sinclude([m4/arts.m4])])
343 AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
344 if test "$have_arts" = "1"; then
345 have_audio_output_driver="true"
346 fi
347 else
348 echo "ARTS support disabled by configure script parameter"
349 fi
350 AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
351 AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
352 config_have_arts="no"
353 if test $have_arts = "1"; then
354 config_have_arts="yes"
355 fi
356
357 # ASIO AUDIO (Win32)
358 AC_ARG_ENABLE(asiosdk-dir,
359 [ --enable-asiosdk-dir
360 Directory where the ASIO SDK is located, this automatically
361 enables the compilation of the ASIO audio output driver.],
362 [config_asiosdk_dir="${enableval}"],
363 [config_asiosdk_dir="."]
364 )
365 AC_SUBST(config_asiosdk_dir)
366
367 AC_ARG_ENABLE(asio-driver,
368 [ --disable-asio-driver
369 Disable support for the Windows ASIO driver.],
370 [config_asio_driver="$enableval"],
371 [config_asio_driver="yes"]
372 )
373 have_asio=0
374 ASIOSDK_BASEDIR=
375 if test "$config_asio_driver" = "yes"; then
376 asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
377 echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
378 if test -e $asiosdk_headerfile ; then
379 echo yes
380 have_asio=1
381 ASIOSDK_BASEDIR="$config_asiosdk_dir"
382 else
383 echo no
384 have_asio=0
385 fi
386 if test "$have_asio" = "1"; then
387 have_audio_output_driver="true"
388 fi
389 else
390 echo "Windows ASIO support disabled by configure script parameter"
391 fi
392 AC_SUBST(ASIOSDK_BASEDIR)
393 AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
394 AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
395 config_have_asio="no"
396 if test $have_asio = "1"; then
397 config_have_asio="yes"
398 fi
399
400 # MidiShare (Linux, OS X, Windows)
401 AC_ARG_ENABLE(midishare-driver,
402 [ --disable-midishare-driver
403 Disable support for the MidiShare system.],
404 [config_midishare_driver="$enableval"],
405 [config_midishare_driver="yes"]
406 )
407 have_midishare=0
408 if test "$config_midishare_driver" = "yes"; then
409 AC_CHECK_HEADER(MidiShare.h,
410 AC_CHECK_LIB(MidiShare, MidiCountEvs,
411 have_midishare=1,
412 have_midishare=0
413 )
414 ,
415 have_midishare=0
416 )
417 if test "$have_midishare" = "1"; then
418 have_midi_input_driver="true"
419 fi
420 else
421 echo "MidiShare support disabled by configure script parameter"
422 fi
423 AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
424 AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
425 config_have_midishare="no"
426 if test $have_midishare = "1"; then
427 config_have_midishare="yes"
428 fi
429
430 # CoreMIDI (OS X)
431 AC_ARG_ENABLE(coremidi-driver,
432 [ --disable-coremidi-driver
433 Disable support for the Apple CoreMIDI system.],
434 [config_coremidi_driver="$enableval"],
435 [config_coremidi_driver="yes"]
436 )
437 have_coremidi=0
438 if test "$config_coremidi_driver" = "yes"; then
439 AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
440 have_coremidi=1,
441 have_coremidi=0
442 )
443 if test "$have_coremidi" = "1"; then
444 have_midi_input_driver="true"
445 fi
446 else
447 echo "CoreMIDI support disabled by configure script parameter"
448 fi
449 AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
450 AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
451 config_have_coremidi="no"
452 if test $have_coremidi = "1"; then
453 config_have_coremidi="yes"
454 fi
455
456 # CoreAudio (OS X)
457 AC_ARG_ENABLE(coreaudio-driver,
458 [ --disable-coreaudio-driver
459 Disable support for the Apple CoreAudio system.],
460 [config_coreaudio_driver="$enableval"],
461 [config_coreaudio_driver="yes"]
462 )
463 have_coreaudio=0
464 if test "$config_coreaudio_driver" = "yes"; then
465 AC_CHECK_HEADER(CoreAudio/CoreAudio.h,
466 have_coreaudio=1,
467 have_coreaudio=0
468 )
469 if test "$have_coreaudio" = "1"; then
470 have_audio_output_driver="true"
471 fi
472 else
473 echo "CoreAudio support disabled by configure script parameter"
474 fi
475 AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1")
476 AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.])
477 config_have_coreaudio="no"
478 if test $have_coreaudio = "1"; then
479 config_have_coreaudio="yes"
480 fi
481
482 # MME MIDI (Win32)
483 AC_ARG_ENABLE(mmemidi-driver,
484 [ --disable-mmemidi-driver
485 Disable support for the Windows MME MIDI system.],
486 [config_mmemidi_driver="$enableval"],
487 [config_mmemidi_driver="yes"]
488 )
489 have_mmemidi=0
490 if test "$config_mmemidi_driver" = "yes"; then
491 AC_CHECK_HEADERS(mmsystem.h,
492 have_mmemidi=1,
493 have_mmemidi=0
494 )
495 if test "$have_mmemidi" = "1"; then
496 have_midi_input_driver="true"
497 fi
498 else
499 echo "MME MIDI support disabled by configure script parameter"
500 fi
501 AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
502 AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
503 config_have_mme="no"
504 if test $have_mmemidi = "1"; then
505 config_have_mme="yes"
506 fi
507
508 # DSSI
509 AC_CHECK_HEADERS(dssi.h,
510 config_have_dssi="yes",
511 config_have_dssi="no")
512 AM_CONDITIONAL(HAVE_DSSI, test $config_have_dssi = "yes")
513
514 # LV2
515 PKG_CHECK_MODULES(LV2, lv2 >= 1.0.0, config_have_lv2="yes", config_have_lv2="no")
516 AC_SUBST(LV2_CFLAGS)
517 AC_SUBST(LV2_LIBS)
518 AM_CONDITIONAL(HAVE_LV2, test $config_have_lv2 = "yes")
519
520 # VST
521 AC_ARG_ENABLE(vstsdk-dir,
522 [ --enable-vstsdk-dir
523 Directory where the VST SDK is located.
524 This automatically enables the compilation
525 of the VST plugin.],
526 [VSTSDK_DIR="${enableval}"],
527 [VSTSDK_DIR=]
528 )
529 AC_SUBST(VSTSDK_DIR)
530 AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
531 config_have_vst="no"
532 if test "x$VSTSDK_DIR" != "x"; then
533 config_have_vst="yes"
534 fi
535
536 # AU
537 AC_CHECK_HEADERS(AudioUnit/AudioUnit.h,
538 config_have_au="yes",
539 config_have_au="no")
540 AM_CONDITIONAL(HAVE_AU, test $config_have_au = "yes")
541 AM_CONDITIONAL(HAVE_AUFLAGS, test "$AUFLAGS" != "")
542
543 if test $config_have_au = "yes" ; then
544 if test "x$DEVELOPER_EXTRAS_DIR" = "x" ; then
545 if test -d /Developer/Extras ; then
546 DEVELOPER_EXTRAS_DIR=/Developer/Extras
547 else
548 DEVELOPER_EXTRAS_DIR=/Developer/Examples
549 fi
550 fi
551 AC_SUBST(DEVELOPER_EXTRAS_DIR)
552 fi
553
554 if test "x$MAC_PLUGIN_INSTALL_DIR" = "x" ; then
555 MAC_PLUGIN_INSTALL_DIR=/Library/Audio/Plug-Ins
556 fi
557 AC_SUBST(MAC_PLUGIN_INSTALL_DIR)
558
559 # have we found at least one MIDI input and one audio output driver ?
560 if test "$have_midi_input_driver" = "false"; then
561 echo "No supported MIDI input system found!"
562 echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
563 echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
564 echo "If you think you have one of those available on your system, make sure you"
565 echo "also have the respective development (header) files installed."
566 exit -1;
567 fi
568 if test "$have_audio_output_driver" = "false"; then
569 echo "No supported audio output system found!"
570 echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
571 echo "driver at the moment!"
572 exit -1;
573 fi
574
575
576
577 ###########################################################################
578 # Checks for various DLL libraries
579
580 # Check presence of libgig
581 libgig_version="3.3.0"
582 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
583 if test "$HAVE_GIG" = "false"; then
584 echo "Required libgig version not found!"
585 echo "You need to have libgig version ${libgig_version} installed!"
586 exit -1;
587 else
588 echo "yes, found libgig $libgig_version"
589 fi
590 AC_SUBST(GIG_CFLAGS)
591 AC_SUBST(GIG_LIBS)
592
593 # SF2 Engine (requires libgig)
594 AC_ARG_ENABLE(sf2-engine,
595 [ --disable-sf2-engine
596 Disable compilation of the SF2 engine.
597 You need to have libgig installed.],
598 [config_sf2_engine="$enableval"],
599 [config_sf2_engine="yes"]
600 )
601 HAVE_SF2=0;
602 if test "$config_sf2_engine" = "yes"; then
603 HAVE_SF2=1
604 else
605 echo "SF2 engine disabled by configure script parameter"
606 fi
607 AM_CONDITIONAL(HAVE_SF2, test $HAVE_SF2 = 1)
608 AC_DEFINE_UNQUOTED(HAVE_SF2,$HAVE_SF2,[Define to 1 if you want SF2 engine and have libsf2 installed.])
609 config_have_sf2="no"
610 if test $HAVE_SF2 = "1"; then
611 config_have_sf2="yes"
612 fi
613
614 # Check presence of libsndfile
615 libsndfile_version="1.0"
616 PKG_CHECK_MODULES(SNDFILE, sndfile >= $libsndfile_version, HAVE_SNDFILE=true, HAVE_SNDFILE=false)
617 if test "$HAVE_SNDFILE" = "false"; then
618 echo "Required libsndfile version not found!"
619 echo "You need to have libsndfile version ${libsndfile_version} installed!"
620 exit -1;
621 else
622 echo "yes, found libsndfile $libsndfile_version"
623 fi
624 AC_SUBST(SNDFILE_CFLAGS)
625 AC_SUBST(SNDFILE_LIBS)
626
627 # Check for Vorbis support in libsndfile
628 linuxsampler_save_CFLAGS=$CFLAGS
629 CFLAGS="$SNDFILE_CFLAGS $CFLAGS"
630 AC_CHECK_DECLS([SF_FORMAT_VORBIS], [], [], [[#include <sndfile.h>]])
631
632 # Check for loop functionality in libsndfile
633 AC_CHECK_MEMBERS([SF_INSTRUMENT.loops],,
634 [AC_MSG_WARN([Your version of libsndfile does not support
635 reading of loop information. LinuxSampler will not be able to
636 extract loop information from sample files.])],
637 [#include <sndfile.h>])
638 CFLAGS=$linuxsampler_save_CFLAGS
639
640 # Instruments DB feature (requires SQLite 3.3)
641 AC_ARG_ENABLE(instruments-db,
642 [ --disable-instruments-db
643 Disable compilation of the sampler's instruments
644 database feature. You need to have SQLite 3.3
645 or younger installed for this feature.],
646 [config_instruments_db="$enableval"],
647 [config_instruments_db="yes"]
648 )
649 HAVE_SQLITE3=0;
650 if test "$config_instruments_db" = "yes"; then
651 # Check presence of sqlite3
652 sqlite_version="3.3"
653 PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
654 AC_SUBST(SQLITE3_LIBS)
655 AC_SUBST(SQLITE3_CFLAGS)
656 if test $HAVE_SQLITE3 = false; then
657 HAVE_SQLITE3=0
658 config_instruments_db="no"
659 echo "*** Required sqlite version not found!"
660 echo "*** You need to have sqlite version ${sqlite_version} or higher"
661 echo "*** for instruments database support to be enabled."
662 echo "*** Support for instruments DB will be disabled!"
663 else
664 HAVE_SQLITE3=1
665 fi
666 else
667 echo "Instruments DB feature disabled by configure script parameter"
668 fi
669 AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
670 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
671
672
673
674 ###########################################################################
675 # Handle Configuration Options
676
677 # TODO: should we use AC_ARG_VAR(variable, description) instead?
678
679 AC_ARG_ENABLE(asm,
680 [ --disable-asm
681 Enable hand-crafted assembly optimizations
682 (default=on). LinuxSampler provides CPU specific
683 assembly optimizations. This is currently limited
684 to just enter a fast (denormal) FPU mode on x86
685 platforms. There are currently no synthesis core
686 assembly optimizations anymore since LS 0.4.0],
687 [config_asm="$enableval"],
688 [config_asm="yes"]
689 )
690 if test "$config_asm" = "yes"; then
691 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
692 fi
693
694 AC_ARG_ENABLE(dev-mode,
695 [ --enable-dev-mode
696 Enable development mode (default=off). In that mode
697 we do some extra sanity checks here and there.
698 This helps to spot possible problems, but reduces
699 efficiency a bit],
700 [config_dev_mode="$enableval"],
701 [config_dev_mode="no"]
702 )
703 if test "$config_dev_mode" = "yes"; then
704 AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
705 fi
706
707 AC_ARG_ENABLE(debug-level,
708 [ --enable-debug-level
709 Specify verbosity of console messages (default=1).
710 The higher the value, the higher will be verbosity.
711 A value of 0 means no console output at all.
712 There's not really an upper limit but the usual
713 level of all messages is currently somewhere less
714 than 10.],
715 [config_debug_level="${enableval}"],
716 [config_debug_level="1"]
717 )
718 AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
719
720 AC_ARG_ENABLE(rt-exceptions,
721 [ --enable-rt-exceptions
722 Enable exceptions in the realtime thread
723 (default=no). If this is enabled, exceptions will
724 be thrown on critical errors in the realtime
725 context as well. Otherwise if disabled
726 segmentation faults will be forced by the
727 application on critical errors.],
728 [config_rt_exceptions="$enableval"],
729 [config_rt_exceptions="no"]
730 )
731 if test "$config_rt_exceptions" = "yes"; then
732 AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
733 fi
734
735 config_pthread_testcancel="$mac"
736 AC_ARG_ENABLE(pthread-testcancel,
737 [ --enable-pthread-testcancel
738 Enable pthread_testcancel() calls and avoid
739 asynchronous cancel of pthreads (default=yes
740 for Mac targets, no otherwise).],
741 [config_pthread_testcancel="$enableval"],
742 [])
743 if test "$config_pthread_testcancel" = "yes"; then
744 AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
745 fi
746
747 AC_ARG_ENABLE(preload-samples,
748 [ --enable-preload-samples
749 Due to seeking and latency issues with hard drives
750 we have to cache a small part of samples' head in
751 RAM (default=32768). The higher this value the
752 more memory will be occupied for each sample, but
753 the safer this will be in regards of possible
754 droputs. A 'good' value depends on the running
755 system and usage dependant factors.],
756 [config_preload_samples="${enableval}"],
757 [config_preload_samples="32768"]
758 )
759 AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
760
761 AC_ARG_ENABLE(max-pitch,
762 [ --enable-max-pitch
763 Specify the maximum allowed pitch value in octaves
764 (default=4). To lower memory usage you might want
765 set a smaller value.],
766 [config_max_pitch="${enableval}"],
767 [config_max_pitch="4"]
768 )
769 AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
770
771 AC_ARG_ENABLE(max-events,
772 [ --enable-max-events
773 Specify the maximum allowed amount of events to be
774 processed per fragment (default=1024).],
775 [config_max_events="${enableval}"],
776 [config_max_events="1024"]
777 )
778 AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
779
780 AC_ARG_ENABLE(eg-bottom,
781 [ --enable-eg-bottom
782 Bottom limit of envelope generators
783 (default=0.001). Certain kinds of curve types like
784 exponential curves converge against 0 but never
785 reach 0. So we have to define a certain low value
786 after which we should consider all smaller values
787 to be 'almost zero'. The smaller this value, the
788 longer will voices survive in EG's release stage
789 and thus waste voices. If this value is too high
790 will cause click sounds though.],
791 [config_eg_bottom="${enableval}"],
792 [config_eg_bottom="0.001"]
793 )
794 AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
795
796 AC_ARG_ENABLE(eg-min-release-time,
797 [ --enable-eg-min-release-time
798 Specify the lowest allowed release time in seconds
799 (default=0.0025). This value will also be used to
800 ramp down voices on voice stealing. This value
801 should always be less than the period time of the
802 used audio driver, as in case of voice stealing
803 the killed voice needs to be completely ramped
804 down in the same fragment.],
805 [config_eg_min_release_time="${enableval}"],
806 [config_eg_min_release_time="0.0025"]
807 )
808 AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
809
810 AC_ARG_ENABLE(refill-streams,
811 [ --enable-refill-streams
812 Number of streams that should be refilled in each
813 disk thread cycle (default=4).],
814 [config_refill_streams="${enableval}"],
815 [config_refill_streams="4"]
816 )
817 AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
818
819 AC_ARG_ENABLE(stream-min-refill,
820 [ --enable-stream-min-refill
821 Minimum refill size for disk streams (default=1024).
822 The disk thread will go to sleep for a while if no
823 stream had to be refilled more than this value in
824 a disk thread cycle.],
825 [config_stream_min_refill="${enableval}"],
826 [config_stream_min_refill="1024"]
827 )
828 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
829
830 AC_ARG_ENABLE(stream-max-refill,
831 [ --enable-stream-max-refill
832 Maximum refill size for disk streams
833 (default=65536). The disk thread will refill
834 each stream only by a size of this value per
835 disk thread cycle.],
836 [config_stream_max_refill="${enableval}"],
837 [config_stream_max_refill="65536"]
838 )
839 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
840
841 AC_ARG_ENABLE(stream-size,
842 [ --enable-stream-size
843 Size of each stream's ring buffer in sample points
844 (default=262144).],
845 [config_stream_size="${enableval}"],
846 [config_stream_size="262144"]
847 )
848 AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
849
850 AC_ARG_ENABLE(max-streams,
851 [ --enable-max-streams
852 Initial maximum amount of disk streams
853 (default=90). This value can be changed at
854 runtime. It should always be higher than the
855 maximum amount of voices.],
856 [config_max_streams="${enableval}"],
857 [config_max_streams="90"]
858 )
859 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
860
861 AC_ARG_ENABLE(max-voices,
862 [ --enable-max-voices
863 Initial maximum amount of voices (default=64).
864 This value can be changed at runtime. It should
865 always be lower than the maximum amount of disk
866 streams.],
867 [config_max_voices="${enableval}"],
868 [config_max_voices="64"]
869 )
870 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
871
872 AC_ARG_ENABLE(subfragment-size,
873 [ --enable-subfragment-size
874 Every audio fragment will be splitted into
875 subfragments. Where each subfragment renders
876 audio with constant synthesis parameters. This is
877 done for efficiency reasons. This parameter
878 defines the default size of a subfragment in
879 sample points. A large value means less CPU time
880 whereas a low value means better audio quality
881 (default=32).],
882 [config_subfragment_size="${enableval}"],
883 [config_subfragment_size="32"]
884 )
885 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
886
887 AC_ARG_ENABLE(global-attenuation-default,
888 [ --enable-global-attenuation-default
889 To prevent clipping all samples will be lowered
890 in amplitude by this given default factor (can
891 be overridden at runtime).
892 (default=0.35)],
893 [config_global_attenuation_default="${enableval}"],
894 [config_global_attenuation_default="0.35"]
895 )
896 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
897
898 AC_ARG_ENABLE(voice-steal-algo,
899 [ --enable-voice-steal-algo
900 Voice stealing algorithm to be used. Currently
901 available options:
902 none:
903 Disable voice stealing completely.
904 oldestvoiceonkey (default):
905 Try to kill a voice on the same key first,
906 if no success, proceed with the oldest key.
907 oldestkey:
908 Try to kill a voice from the oldest active
909 key.],
910 [ if test ! "(" "${enableval}" = "none" \
911 -o "${enableval}" = "oldestvoiceonkey" \
912 -o "${enableval}" = "oldestkey" ")" ; then
913 AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
914 else
915 config_voice_steal_algo="${enableval}"
916 fi
917 ],
918 [config_voice_steal_algo="oldestvoiceonkey"]
919 )
920 AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
921
922 AC_ARG_ENABLE(sysex-buffer-size,
923 [ --enable-sysex-buffer-size
924 System Exclusive Message buffer size in kB
925 (default=2048).],
926 [config_sysex_buffer_size="${enableval}"],
927 [config_sysex_buffer_size="2048"]
928 )
929 AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
930
931 AC_ARG_ENABLE(force-filter,
932 [ --enable-force-filter
933 If enabled will force filter to be used even if
934 no usage was define in instrument patch files.
935 (default=no).],
936 [config_force_filter="$enableval"],
937 [config_force_filter="no"]
938 )
939 if test "$config_force_filter" = "yes"; then
940 AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
941 fi
942
943 AC_ARG_ENABLE(filter-cutoff-min,
944 [ --enable-filter-cutoff-min
945 Minimum filter cutoff frequency in Hz
946 (default=100.0).],
947 [config_filter_cutoff_min="${enableval}"],
948 [config_filter_cutoff_min="100.0"]
949 )
950 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
951
952 AC_ARG_ENABLE(filter-cutoff-max,
953 [ --enable-filter-cutoff-max
954 Maximum filter cutoff frequency in Hz
955 (default=10000.0).],
956 [config_filter_cutoff_max="${enableval}"],
957 [config_filter_cutoff_max="10000.0"]
958 )
959 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
960
961 AC_ARG_ENABLE(override-cutoff-ctrl,
962 [ --enable-override-cutoff-ctrl
963 Override filter cutoff MIDI controller (default=no).
964 Note: you have to define the MIDI controller number
965 here, it's not a boolean parameter type! If this
966 option is used, controller number given by
967 instrument patch will be ignored and instead this
968 supplied value will be used.],
969 [config_override_cutoff_ctrl="${enableval}"],
970 [config_override_cutoff_ctrl="no"]
971 )
972 if test ! "$config_override_cutoff_ctrl" = "no"; then
973 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
974 fi
975
976 AC_ARG_ENABLE(override-resonance-ctrl,
977 [ --enable-override-resonance-ctrl
978 Override filter resonance MIDI controller
979 (default=no). Note: you have to define the MIDI
980 controller number here, it's not a boolean
981 parameter type! If this option is used, controller
982 number given by instrument patch will be ignored
983 and instead this supplied value will be used.],
984 [config_override_resonance_ctrl="${enableval}"],
985 [config_override_resonance_ctrl="no"]
986 )
987 if test ! "$config_override_resonance_ctrl" = "no"; then
988 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
989 fi
990
991 AC_ARG_ENABLE(override-filter-type,
992 [ --enable-override-filter-type
993 Override filter type (default=no). Options:
994 hp: for highpass
995 bp: for bandpass
996 br: for bandreject
997 lp: for lowpass
998 lpt: for lowpass turbo],
999 [ if test "${enableval}" = "hp" ; then
1000 config_override_filter_type="::gig::vcf_type_highpass"
1001 elif test "${enableval}" = "bp" ; then
1002 config_override_filter_type="::gig::vcf_type_bandpass"
1003 elif test "${enableval}" = "br" ; then
1004 config_override_filter_type="::gig::vcf_type_bandreject"
1005 elif test "${enableval}" = "lp" ; then
1006 config_override_filter_type="::gig::vcf_type_lowpass"
1007 elif test "${enableval}" = "lpt" ; then
1008 config_override_filter_type="::gig::vcf_type_lowpassturbo"
1009 elif test ! "${enableval}" = "no"; then
1010 AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
1011 fi
1012 ],
1013 [config_override_filter_type="no"]
1014 )
1015 if test ! "$config_override_filter_type" = "no"; then
1016 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
1017 fi
1018
1019 AC_ARG_ENABLE(gs-checksum,
1020 [ --enable-gs-checksum
1021 Enable Roland General Synth SysEx checksum check
1022 (default=no). If this is enabled, all GS SysEx
1023 messages which do not provide a correct checksum
1024 will be ignored. This is disabled by default as
1025 not all devices honor GS checksums.],
1026 [config_assert_gs_sysex_checksum="$enableval"],
1027 [config_assert_gs_sysex_checksum="no"]
1028 )
1029 if test "config_assert_gs_sysex_checksum" = "yes"; then
1030 AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
1031 fi
1032
1033 AC_ARG_ENABLE(portamento-time-min,
1034 [ --enable-portamento-time-min
1035 Minimum Portamento time in seconds
1036 (default=0.1).],
1037 [config_portamento_time_min="${enableval}"],
1038 [config_portamento_time_min="0.1"]
1039 )
1040 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
1041
1042 AC_ARG_ENABLE(portamento-time-max,
1043 [ --enable-portamento-time-max
1044 Maximum Portamento time in seconds
1045 (default=32).],
1046 [config_portamento_time_max="${enableval}"],
1047 [config_portamento_time_max="32"]
1048 )
1049 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
1050
1051 AC_ARG_ENABLE(portamento-time-default,
1052 [ --enable-portamento-time-default
1053 Default Portamento time in seconds
1054 (default=1).],
1055 [config_portamento_time_default="${enableval}"],
1056 [config_portamento_time_default="1"]
1057 )
1058 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
1059
1060 AC_ARG_ENABLE(signed-triang-algo,
1061 [ --enable-signed-triang-algo
1062 Signed triangular wave algorithm to be used (e.g. for LFOs).
1063 Currently available options:
1064 intmath:
1065 Uses integer math without any branch will then be
1066 converted to floating point value for each sample point.
1067 This int->float conversion might hurt on some systems.
1068 intmathabs:
1069 Similar to intmath but uses abs() function.
1070 Depending on compiler and platrofm this could
1071 perform better than integer math as it avoids
1072 an extra integer multiply instruction.
1073 diharmonic:
1074 The triangular wave will be approximated by adding two
1075 sinusoidials. This solution might especially hurt on
1076 systems with weak floating point unit.
1077 benchmark (default):
1078 This is not an algorithm. Use this option if the
1079 appropriate algorithm should be automatically
1080 chosen by the configure script by performing a
1081 benchmark between the algorithms mentioned above.
1082 This will NOT work for cross compilation!],
1083 [ if test ! "(" "${enableval}" = "intmath" \
1084 -o "${enableval}" = "intmathabs" \
1085 -o "${enableval}" = "diharmonic" ")" ; then
1086 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
1087 else
1088 config_signed_triang_algo="${enableval}"
1089 fi
1090 ],
1091 [config_signed_triang_algo="benchmark"]
1092 )
1093
1094 AC_ARG_ENABLE(unsigned-triang-algo,
1095 [ --enable-unsigned-triang-algo
1096 Unsigned triangular wave algorithm to be used (e.g. for LFOs).
1097 Currently available options:
1098 intmath:
1099 Uses integer math without any branch will then be
1100 converted to floating point value for each sample point.
1101 This int->float conversion might hurt on some systems.
1102 intmathabs:
1103 Similar to intmath but uses abs() function.
1104 Depending on compiler and platrofm this could
1105 perform better than integer math as it avoids
1106 an extra integer multiply instruction.
1107 diharmonic:
1108 The triangular wave will be approximated by adding two
1109 sinusoidials. This solution might especially hurt on
1110 systems with weak floating point unit.
1111 benchmark (default):
1112 This is not an algorithm. Use this option if the
1113 appropriate algorithm should be automatically
1114 chosen by the configure script by performing a
1115 benchmark between the algorithms mentioned above.
1116 This will NOT work for cross compilation!],
1117 [ if test ! "(" "${enableval}" = "intmath" \
1118 -o "${enableval}" = "intmathabs" \
1119 -o "${enableval}" = "diharmonic" ")" ; then
1120 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
1121 else
1122 config_unsigned_triang_algo="${enableval}"
1123 fi
1124 ],
1125 [config_unsigned_triang_algo="benchmark"]
1126 )
1127
1128 AC_ARG_ENABLE(process-muted-channels,
1129 [ --enable-process-muted-channels
1130 Enable processing of muted channels (default=no).
1131 In that mode all MIDI events in the muted channels
1132 will be processed. This will provide information
1133 about the active voices in the muted channels and
1134 will not discard notes, triggered in mute mode,
1135 when the channel is unmuted. But also will reduce
1136 the efficiency.],
1137 [config_process_muted_channels="$enableval"],
1138 [config_process_muted_channels="no"]
1139 )
1140 if test "$config_process_muted_channels" = "yes"; then
1141 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
1142 fi
1143
1144 AC_ARG_ENABLE(process-all-notes-off,
1145 [ --disable-process-all-notes-off
1146 Disable interpretation of All-Notes-Off MIDI
1147 messages (default=on). By default LS will release
1148 all voices whenever it receives an All-Notes-Off
1149 MIDI message. You can disable this behavior, so
1150 that LS simply ignores such messages.],
1151 [config_process_all_notes_off="$enableval"],
1152 [config_process_all_notes_off="yes"]
1153 )
1154 if test "$config_process_all_notes_off" = "yes"; then
1155 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
1156 fi
1157
1158 AC_ARG_ENABLE(interpolate-volume,
1159 [ --disable-interpolate-volume
1160 Disable interpolation of volume modulation
1161 (default=on). With this enabled, the volume changes
1162 generated by for example the envelope generator
1163 will be smoother, minimizing the risk for audio
1164 clicks. Disable it to reduce CPU usage.],
1165 [config_interpolate_volume="$enableval"],
1166 [config_interpolate_volume="yes"]
1167 )
1168 if test "$config_interpolate_volume" = "yes"; then
1169 AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
1170 fi
1171
1172 AC_ARG_ENABLE(master-volume-sysex-by-port,
1173 [ --enable-master-volume-sysex-by-port
1174 Whether global volume sysex message should be
1175 applied globally to the whole sampler or only to
1176 the sampler channels connected to the same MIDI
1177 input port on which the sysex message arrived on.
1178 By default global volume sysex messages apply
1179 globally to the whole sampler, since many MIDI
1180 devices behave that way.],
1181 [config_master_volume_sysex_by_port="$enableval"],
1182 [config_master_volume_sysex_by_port="no"]
1183 )
1184 if test "$config_master_volume_sysex_by_port" = "yes"; then
1185 AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
1186 fi
1187
1188 AC_ARG_ENABLE(plugin-dir,
1189 [ --enable-plugin-dir
1190 Directory where the sampler shall look for potential plugins,
1191 that is 3rd party shared libraries that should be loaded by
1192 the sampler on startup. By default the sampler will search
1193 for plugins in the subdirectory "plugins" below its own
1194 library directory.
1195 (i.e. /usr/local/lib/linuxsampler/plugins)],
1196 [config_plugin_dir="${enableval}"],
1197 [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1198 )
1199 AC_SUBST(config_plugin_dir)
1200
1201 AC_ARG_ENABLE(default-instruments-db-location,
1202 [ --enable-default-instruments-db-location
1203 Only when instruments DB feature is enabled: file name
1204 which shall be taken as default location of the
1205 instruments DB file. This location can still be
1206 overridden at runtime with a command line switch.
1207 (default: /var/lib/linuxsampler/instruments.db)],
1208 [config_default_instruments_db_file="${enableval}"],
1209 [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1210 )
1211 AC_DEFINE_UNQUOTED(
1212 CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1213 "$config_default_instruments_db_file",
1214 [Only when instruments DB feature is enabled: default location of the DB file.]
1215 )
1216 AC_SUBST(config_default_instruments_db_file)
1217
1218
1219 ###########################################################################
1220 # Automatic Benchmarks (to detect the best algorithms for the system)
1221
1222 AC_LANG_SAVE
1223
1224 if test "$config_signed_triang_algo" = "benchmark"; then
1225 echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1226 AC_LANG_CPLUSPLUS
1227 AC_TRY_RUN([
1228 #define SIGNED 1
1229 #define SILENT 1
1230 #include "${srcdir}/benchmarks/triang.cpp"
1231 ],
1232 triang_signed=0,
1233 triang_signed=$?,
1234 triang_signed=0
1235 )
1236 if test "$triang_signed" = "2"; then
1237 config_signed_triang_algo="intmath"
1238 echo "integer math"
1239 elif test "$triang_signed" = "3"; then
1240 config_signed_triang_algo="diharmonic"
1241 echo "di harmonics"
1242 elif test "$triang_signed" = "5"; then
1243 config_signed_triang_algo="intmathabs"
1244 echo "integer math using abs()"
1245 else
1246 echo "Benchmark of signed triangular wave algorithms failed!"
1247 echo "Maybe you are doing cross compilation? In that case you have to select"
1248 echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1249 echo "Call './configure --help' for further information or read configure.in."
1250 exit -1;
1251 fi
1252 else
1253 case "$config_signed_triang_algo" in
1254 intmath)
1255 triang_signed=2 ;;
1256 diharmonic)
1257 triang_signed=3 ;;
1258 intmathabs)
1259 triang_signed=5 ;;
1260 esac
1261 fi
1262 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1263
1264 if test "$config_unsigned_triang_algo" = "benchmark"; then
1265 echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1266 AC_LANG_CPLUSPLUS
1267 AC_TRY_RUN([
1268 #define SIGNED 0
1269 #define SILENT 1
1270 #include "${srcdir}/benchmarks/triang.cpp"
1271 ],
1272 triang_unsigned=0,
1273 triang_unsigned=$?,
1274 triang_unsigned=0
1275 )
1276 if test "$triang_unsigned" = "2"; then
1277 config_unsigned_triang_algo="intmath"
1278 echo "integer math"
1279 elif test "$triang_unsigned" = "3"; then
1280 config_unsigned_triang_algo="diharmonic"
1281 echo "di harmonics"
1282 elif test "$triang_unsigned" = "5"; then
1283 config_unsigned_triang_algo="intmathabs"
1284 echo "integer math using abs()"
1285 else
1286 echo "Benchmark of unsigned triangular wave algorithms failed!"
1287 echo "Maybe you are doing cross compilation? In that case you have to select"
1288 echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1289 echo "Call './configure --help' for further information or read configure.in."
1290 exit -1;
1291 fi
1292 else
1293 case "$config_unsigned_triang_algo" in
1294 intmath)
1295 triang_unsigned=2 ;;
1296 diharmonic)
1297 triang_unsigned=3 ;;
1298 intmathabs)
1299 triang_unsigned=5 ;;
1300 esac
1301 fi
1302 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1303
1304 AC_LANG_RESTORE
1305
1306
1307 ###########################################################################
1308 # Create Build Files
1309
1310 AM_CONFIG_HEADER(config.h)
1311 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1312
1313 AC_LANG_CPLUSPLUS
1314
1315 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1316 # this, the dlfcn.h check in am_prog_libtool may fail.
1317 AC_CHECK_HEADER(stdlib.h)
1318
1319 AC_OUTPUT( \
1320 Makefile \
1321 man/Makefile \
1322 man/linuxsampler.1 \
1323 src/Makefile \
1324 src/db/Makefile \
1325 src/network/Makefile \
1326 src/engines/Makefile \
1327 src/engines/gig/Makefile \
1328 src/engines/sf2/Makefile \
1329 src/engines/sfz/Makefile \
1330 src/engines/common/Makefile \
1331 src/effects/Makefile \
1332 src/common/Makefile \
1333 src/testcases/Makefile \
1334 src/drivers/Makefile \
1335 src/drivers/audio/Makefile \
1336 src/drivers/midi/Makefile \
1337 src/plugins/Makefile \
1338 src/hostplugins/Makefile \
1339 src/hostplugins/dssi/Makefile \
1340 src/hostplugins/lv2/Makefile \
1341 src/hostplugins/vst/Makefile \
1342 src/hostplugins/au/Makefile \
1343 linuxsampler.spec \
1344 debian/Makefile \
1345 Artwork/Makefile \
1346 scripts/Makefile \
1347 osx/Makefile \
1348 osx/linuxsampler.xcodeproj/Makefile \
1349 Documentation/Makefile \
1350 Documentation/Engines/Makefile \
1351 Documentation/Engines/gig/Makefile \
1352 linuxsampler.pc \
1353 Doxyfile \
1354 )
1355
1356 # resolve all nested variables in '${config_plugin_dir}'
1357 # (merely for providing a human readable summary below)
1358 while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1359 config_plugin_dir=`eval echo ${config_plugin_dir}`
1360 done
1361
1362
1363 ###########################################################################
1364 # Output All Configuration Options
1365
1366 echo ""
1367 echo "#####################################################################"
1368 echo "# LinuxSampler Configuration #"
1369 echo "#-------------------------------------------------------------------#"
1370 echo "# Release Version: ${LINUXSAMPLER_RELEASE_MAJOR}.${LINUXSAMPLER_RELEASE_MINOR}.${LINUXSAMPLER_RELEASE_BUILD}"
1371 echo "# LSCP Version: ${LSCP_RELEASE_MAJOR}.${LSCP_RELEASE_MINOR}"
1372 echo "#-------------------------------------------------------------------"
1373 echo "# Assembly Optimizations: ${config_asm}"
1374 echo "# Development Mode: ${config_dev_mode}"
1375 echo "# Debug Level: ${config_debug_level}"
1376 echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1377 echo "# Preload Samples: ${config_preload_samples}"
1378 echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1379 echo "# Maximum Events: ${config_max_events}"
1380 echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1381 echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1382 echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1383 echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1384 echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1385 echo "# Stream Size: ${config_stream_size}"
1386 echo "# Default Maximum Disk Streams: ${config_max_streams}"
1387 echo "# Default Maximum Voices: ${config_max_voices}"
1388 echo "# Default Subfragment Size: ${config_subfragment_size}"
1389 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1390 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1391 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1392 echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1393 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1394 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1395 echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1396 echo "# Default Portamento Time: ${config_portamento_time_default} s"
1397 echo "# Force Filter Usage: ${config_force_filter}"
1398 echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1399 echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1400 echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1401 echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1402 echo "# Override Filter Type: ${config_override_filter_type}"
1403 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1404 echo "# Process Muted Channels: ${config_process_muted_channels}"
1405 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1406 echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
1407 echo "# Interpolate Volume: ${config_interpolate_volume}"
1408 echo "# Instruments database support: ${config_instruments_db}"
1409 if test "$config_instruments_db" = "yes"; then
1410 echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1411 fi
1412 echo "# Plugin Path: ${config_plugin_dir}"
1413 echo "#-------------------------------------------------------------------"
1414 echo "# MIDI Input Drivers:"
1415 echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack_midi}, CoreMIDI: ${config_have_coremidi}, MME: ${config_have_mme}, MidiShare: ${config_have_midishare}"
1416 echo "#-------------------------------------------------------------------"
1417 echo "# Audio Output Drivers:"
1418 echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack}, ARTS: ${config_have_arts}, CoreAudio: ${config_have_coreaudio}, ASIO: ${config_have_asio}"
1419 echo "#-------------------------------------------------------------------"
1420 echo "# Sampler Engines:"
1421 echo "# GIG: yes, SF2: ${config_have_sf2}, SFZ: yes"
1422 echo "#-------------------------------------------------------------------"
1423 echo "# Effect plugin systems for internal effects:"
1424 echo "# LADSPA: yes"
1425 echo "#-------------------------------------------------------------------"
1426 echo "# Building sampler as plugin for following host standards:"
1427 echo "# DSSI: ${config_have_dssi}, LV2: ${config_have_lv2}, VST: ${config_have_vst}, AU: ${config_have_au}"
1428 echo "#-------------------------------------------------------------------#"
1429 echo "# Read './configure --help' or file 'configure.in' for details. #"
1430 echo "#####################################################################"
1431 echo ""
1432 echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1433 echo ""

  ViewVC Help
Powered by ViewVC