/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Contents of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 579 - (show annotations) (download)
Tue May 24 19:20:20 2005 UTC (18 years, 9 months ago) by schoenebeck
Original Path: linuxsampler/trunk/configure.in
File size: 22795 byte(s)
* src/network/lscpserver.cpp: fixed segfault
  (patch by Grigor Iliev, fixes #17)
* added man page
* final preparations for the first official release (which will be 0.3.1)

1 AC_INIT(configure.in)
2 AC_C_BIGENDIAN
3 AC_CANONICAL_SYSTEM
4
5 AC_SUBST(target)
6 AC_SUBST(target_alias)
7 AC_SUBST(target_cpu)
8 AC_SUBST(target_os)
9 AC_SUBST(target_vendor)
10
11
12 ###########################################################################
13 # General Checks
14
15 AC_MSG_CHECKING([whether x86 architecture])
16 def_arch_x86=0
17 case $target_cpu in
18 "i386" | "i486" | "i586" | "i686" | "i786")
19 echo "yes"
20 def_arch_x86=1;;
21 *)
22 echo "no";;
23 esac
24 AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
25
26 # determine the right gcc switch for CPU specific optimizations
27 CXX_CPU_SWITCH=
28 if test "$def_arch_x86" = 1; then
29 CXX_CPU_SWITCH="-march=$target_cpu"
30 elif test "$target_cpu" = "powerpc"; then
31 CXX_CPU_SWITCH="-arch=$target_cpu"
32 fi
33 AC_SUBST([CXX_CPU_SWITCH])
34
35 AC_MSG_CHECKING([whether UNIX98 compatible])
36 AC_LANG_SAVE
37 AC_LANG_C
38 AC_TRY_RUN([
39 #ifndef _GNU_SOURCE
40 #define _GNU_SOURCE 1
41 #endif
42 #include <features.h>
43 void main(void) {
44 #if _XOPEN_SOURCE >= 500
45 exit(0); /* UNIX98 compatible */
46 #else
47 exit(-1); /* not UNIX98 compatible */
48 #endif
49 }
50 ],
51 have_unix98="yes",
52 have_unix98="no",
53 have_unix98="no"
54 )
55 AC_LANG_RESTORE
56 AC_MSG_RESULT([$have_unix98])
57 if test "$have_unix98" = "no"; then
58 if test "x$HAVE_UNIX98" = "x"; then
59 echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
60 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
61 echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
62 echo "have a UNIX98 compatible system."
63 exit -1;
64 fi
65 fi
66
67 # Checks for available audio and MIDI systems / drivers
68 # (we throw an error if there's not at least one system for audio output and MIDI input available)
69 have_midi_input_driver="false"
70 have_audio_output_driver="false"
71
72 AC_CHECK_HEADER(alsa/asoundlib.h,
73 AC_CHECK_LIB(asound, main,
74 have_alsa=1
75 ,
76 have_alsa=0
77 )
78 ,
79 have_alsa=0
80 )
81 if test "$have_alsa" = "1"; then
82 have_midi_input_driver="true"
83 have_audio_output_driver="true";
84 fi
85 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
86 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
87
88 echo -n "checking Alsa version... "
89 AC_LANG_SAVE
90 AC_LANG_C
91 AC_TRY_RUN([
92 #include <alsa/asoundlib.h>
93 void main(void) {
94 /* ensure backward compatibility */
95 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
96 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
97 #endif
98 exit(SND_LIB_MAJOR);
99 }
100 ],
101 alsa_major=0,
102 alsa_major=$?,
103 alsa_major=0
104 )
105 AC_TRY_RUN([
106 #include <alsa/asoundlib.h>
107 void main(void) {
108 /* ensure backward compatibility */
109 #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
110 #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
111 #endif
112 exit(SND_LIB_MINOR);
113 }
114 ],
115 alsa_minor=0,
116 alsa_minor=$?,
117 alsa_minor=0
118 )
119 AC_TRY_RUN([
120 #include <alsa/asoundlib.h>
121 void main(void) {
122 /* ensure backward compatibility */
123 #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
124 #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
125 #endif
126 exit(SND_LIB_SUBMINOR);
127 }
128 ],
129 alsa_subminor=0,
130 alsa_subminor=$?,
131 alsa_subminor=0
132 )
133 AC_LANG_RESTORE
134 echo "$alsa_major.$alsa_minor.$alsa_subminor";
135 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
136 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
137 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
138
139 # JACK
140 PKG_CHECK_MODULES(JACK, jack, HAVE_JACK=true, HAVE_JACK=false)
141 AC_SUBST(JACK_LIBS)
142 AC_SUBST(JACK_CFLAGS)
143 if test $HAVE_JACK = false; then
144 HAVE_JACK=0;
145 else
146 HAVE_JACK=1
147 have_audio_output_driver="true";
148 AC_CHECK_LIB(jack, jack_client_name_size, [AC_DEFINE(HAVE_JACK_CLIENT_NAME_SIZE, 1, [Define to 1 if you have the `jack_client_name_size' function.])], , $JACK_LIBS)
149 fi
150 AM_CONDITIONAL(HAVE_JACK, test $HAVE_JACK = 1)
151 AC_DEFINE_UNQUOTED(HAVE_JACK,$HAVE_JACK,[Define to 1 if you have JACK installed.])
152
153 # Check presence of libgig
154 libgig_version="2.0.0"
155 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
156 if test "$HAVE_GIG" = "false"; then
157 echo "Required libgig version not found!"
158 echo "You need to have libgig version ${libgig_version} installed!"
159 exit -1;
160 fi
161 AC_SUBST(GIG_CFLAGS)
162 AC_SUBST(GIG_LIBS)
163
164 # SQLITE3
165 PKG_CHECK_MODULES(SQLITE3, sqlite3, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
166 AC_SUBST(SQLITE3_LIBS)
167 AC_SUBST(SQLITE3_CFLAGS)
168 if test $HAVE_SQLITE3 = false; then
169 HAVE_SQLITE3=0;
170 else
171 HAVE_SQLITE3=1
172 fi
173 AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
174 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you have SQLITE3 installed.])
175
176 if test "$have_midi_input_driver" = "false"; then
177 echo "No supported MIDI input system found!"
178 echo "Sorry, LinuxSampler only supports ALSA as MIDI input driver at the moment!"
179 exit -1;
180 fi
181 if test "$have_audio_output_driver" = "false"; then
182 echo "No supported audio output system found!"
183 echo "Sorry, LinuxSampler only supports ALSA and JACK as audio output driver at the moment!"
184 exit -1;
185 fi
186
187
188 ###########################################################################
189 # Handle Configuration Options
190
191 # TODO: should we use AC_ARG_VAR(variable, description) instead?
192
193 AC_ARG_ENABLE(dev-mode,
194 [ --enable-dev-mode
195 Enable development mode (default=no). In that mode
196 we do some extra sanity checks here and there.
197 This helps to spot possible problems, but reduces
198 efficiency a bit],
199 [config_dev_mode="yes"],
200 [config_dev_mode="no"]
201 )
202 if test "$config_dev_mode" = "yes"; then
203 AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
204 fi
205
206 AC_ARG_ENABLE(debug-level,
207 [ --enable-debug-level
208 Specify verbosity of console messages (default=1).
209 The higher the value, the higher will be verbosity.
210 A value of 0 means no console output at all.
211 There's not really an upper limit but the usual
212 level of all messages is currently somewhere less
213 than 10.],
214 [config_debug_level="${enableval}"],
215 [config_debug_level="1"]
216 )
217 AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
218
219 AC_ARG_ENABLE(rt-exceptions,
220 [ --enable-rt-exceptions
221 Enable exceptions in the realtime thread
222 (default=no). If this is enabled, exceptions will
223 be thrown on critical errors in the realtime
224 context as well. Otherwise if disabled
225 segmentation faults will be forced by the
226 application on critical errors.],
227 [config_rt_exceptions="yes"],
228 [config_rt_exceptions="no"]
229 )
230 if test "$config_rt_exceptions" = "yes"; then
231 AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
232 fi
233
234 AC_ARG_ENABLE(preload-samples,
235 [ --enable-preload-samples
236 Due to seeking and latency issues with hard drives
237 we have to cache a small part of samples' head in
238 RAM (default=32768). The higher this value the
239 more memory will be occupied for each sample, but
240 the safer this will be in regards of possible
241 droputs. A 'good' value depends on the running
242 system and usage dependant factors.],
243 [config_preload_samples="${enableval}"],
244 [config_preload_samples="32768"]
245 )
246 AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
247
248 AC_ARG_ENABLE(max-pitch,
249 [ --enable-max-pitch
250 Specify the maximum allowed pitch value in octaves
251 (default=4). To lower memory usage you might want
252 set a smaller value.],
253 [config_max_pitch="${enableval}"],
254 [config_max_pitch="4"]
255 )
256 AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
257
258 AC_ARG_ENABLE(max-events,
259 [ --enable-max-events
260 Specify the maximum allowed amount of events to be
261 processed per fragment (default=1024).],
262 [config_max_events="${enableval}"],
263 [config_max_events="1024"]
264 )
265 AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
266
267 AC_ARG_ENABLE(eg-bottom,
268 [ --enable-eg-bottom
269 Bottom limit of envelope generators
270 (default=0.001). Certain kinds of curve types like
271 exponential curves converge against 0 but never
272 reach 0. So we have to define a certain low value
273 after which we should consider all smaller values
274 to be 'almost zero'. The smaller this value, the
275 longer will voices survive in EG's release stage
276 and thus waste voices. If this value is too high
277 will cause click sounds though.],
278 [config_eg_bottom="${enableval}"],
279 [config_eg_bottom="0.001"]
280 )
281 AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
282
283 AC_ARG_ENABLE(eg-min-release-time,
284 [ --enable-eg-min-release-time
285 Specify the lowest allowed release time in seconds
286 (default=0.0025). This value will also be used to
287 ramp down voices on voice stealing. This value
288 should always be less than the period time of the
289 used audio driver, as in case of voice stealing
290 the killed voice needs to be completely ramped
291 down in the same fragment.],
292 [config_eg_min_release_time="${enableval}"],
293 [config_eg_min_release_time="0.0025"]
294 )
295 AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
296
297 AC_ARG_ENABLE(refill-streams,
298 [ --enable-refill-streams
299 Number of streams that should be refilled in each
300 disk thread cycle (default=4).],
301 [config_refill_streams="${enableval}"],
302 [config_refill_streams="4"]
303 )
304 AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
305
306 AC_ARG_ENABLE(stream-min-refill,
307 [ --enable-stream-min-refill
308 Minimum refill size for disk streams (default=1024).
309 The disk thread will go to sleep for a while if no
310 stream had to be refilled more than this value in
311 a disk thread cycle.],
312 [config_stream_min_refill="${enableval}"],
313 [config_stream_min_refill="1024"]
314 )
315 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
316
317 AC_ARG_ENABLE(stream-max-refill,
318 [ --enable-stream-max-refill
319 Maximum refill size for disk streams
320 (default=65536). The disk thread will refill
321 each stream only by a size of this value per
322 disk thread cycle.],
323 [config_stream_max_refill="${enableval}"],
324 [config_stream_max_refill="65536"]
325 )
326 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
327
328 AC_ARG_ENABLE(stream-size,
329 [ --enable-stream-size
330 Size of each stream's ring buffer in sample points
331 (default=262144).],
332 [config_stream_size="${enableval}"],
333 [config_stream_size="262144"]
334 )
335 AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
336
337 AC_ARG_ENABLE(max-streams,
338 [ --enable-max-streams
339 Maximum amount of disk streams (default=90). This
340 value should always be higher than the maximum
341 amount of voices.],
342 [config_max_streams="${enableval}"],
343 [config_max_streams="90"]
344 )
345 AC_DEFINE_UNQUOTED(CONFIG_MAX_STREAMS, $config_max_streams, [Define max. streams.])
346
347 AC_ARG_ENABLE(max-voices,
348 [ --enable-max-voices
349 Maximum amount of voices (default=64). This value
350 should always be lower than the maximum amount of
351 disk streams.],
352 [config_max_voices="${enableval}"],
353 [config_max_voices="64"]
354 )
355 AC_DEFINE_UNQUOTED(CONFIG_MAX_VOICES, $config_max_voices, [Define max. voices.])
356
357 AC_ARG_ENABLE(voice-steal-algo,
358 [ --enable-voice-steal-algo
359 Voice stealing algorithm to be used. Currently
360 available options:
361 none:
362 Disable voice stealing completely.
363 oldestvoiceonkey (default):
364 Try to kill a voice on the same key first,
365 if no success, proceed with the oldest key.
366 oldestkey:
367 Try to kill a voice from the oldest active
368 key.],
369 [ if test ! "(" "${enableval}" = "none" \
370 -o "${enableval}" = "oldestvoiceonkey" \
371 -o "${enableval}" = "oldestkey" ")" ; then
372 AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
373 else
374 config_voice_steal_algo="${enableval}"
375 fi
376 ],
377 [config_voice_steal_algo="oldestvoiceonkey"]
378 )
379 AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
380
381 AC_ARG_ENABLE(sysex-buffer-size,
382 [ --enable-sysex-buffer-size
383 System Exclusive Message buffer size in kB
384 (default=2048).],
385 [config_sysex_buffer_size="${enableval}"],
386 [config_sysex_buffer_size="2048"]
387 )
388 AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
389
390 AC_ARG_ENABLE(filter-update-steps,
391 [ --enable-filter-update-steps
392 Amount of sample points after which filter
393 parameters (cutoff, resonance) are going to be
394 updated (default=64). Higher value means less CPU
395 load, but also worse parameter resolution, this
396 value will be aligned to a power of two.],
397 [config_filter_update_steps="${enableval}"],
398 [config_filter_update_steps="64"]
399 )
400 AC_DEFINE_UNQUOTED(CONFIG_FILTER_UPDATE_STEPS, $config_filter_update_steps, [Define amount of steps to refresh filter coefficients.])
401
402 AC_ARG_ENABLE(force-filter,
403 [ --enable-force-filter
404 If enabled will force filter to be used even if
405 no usage was define in instrument patch files.
406 (default=no).],
407 [config_force_filter="yes"],
408 [config_force_filter="no"]
409 )
410 if test "$config_force_filter" = "yes"; then
411 AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
412 fi
413
414 AC_ARG_ENABLE(filter-cutoff-min,
415 [ --enable-filter-cutoff-min
416 Minimum filter cutoff frequency in Hz
417 (default=100.0).],
418 [config_filter_cutoff_min="${enableval}"],
419 [config_filter_cutoff_min="100.0"]
420 )
421 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
422
423 AC_ARG_ENABLE(filter-cutoff-max,
424 [ --enable-filter-cutoff-max
425 Maximum filter cutoff frequency in Hz
426 (default=10000.0).],
427 [config_filter_cutoff_max="${enableval}"],
428 [config_filter_cutoff_max="10000.0"]
429 )
430 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
431
432 AC_ARG_ENABLE(override-cutoff-ctrl,
433 [ --enable-override-cutoff-ctrl
434 Override filter cutoff MIDI controller (default=no).
435 Note: you have to define the MIDI controller number
436 here, it's not a boolean parameter type! If this
437 option is used, controller number given by
438 instrument patch will be ignored and instead this
439 supplied value will be used.],
440 [config_override_cutoff_ctrl="${enableval}"],
441 [config_override_cutoff_ctrl="no"]
442 )
443 if test ! "$config_override_cutoff_ctrl" = "no"; then
444 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
445 fi
446
447 AC_ARG_ENABLE(override-resonance-ctrl,
448 [ --enable-override-resonance-ctrl
449 Override filter resonance MIDI controller
450 (default=no). Note: you have to define the MIDI
451 controller number here, it's not a boolean
452 parameter type! If this option is used, controller
453 number given by instrument patch will be ignored
454 and instead this supplied value will be used.],
455 [config_override_resonance_ctrl="${enableval}"],
456 [config_override_resonance_ctrl="no"]
457 )
458 if test ! "$config_override_resonance_ctrl" = "no"; then
459 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
460 fi
461
462 AC_ARG_ENABLE(override-filter-type,
463 [ --enable-override-filter-type
464 Override filter type (default=no). Options:
465 hp: for highpass
466 bp: for bandpass
467 br: for bandreject
468 lp: for lowpass
469 lpt: for lowpass turbo],
470 [ if test "${enableval}" = "hp" ; then
471 config_override_filter_type="::gig::vcf_type_highpass"
472 elif test "${enableval}" = "bp" ; then
473 config_override_filter_type="::gig::vcf_type_bandpass"
474 elif test "${enableval}" = "br" ; then
475 config_override_filter_type="::gig::vcf_type_bandreject"
476 elif test "${enableval}" = "lp" ; then
477 config_override_filter_type="::gig::vcf_type_lowpass"
478 elif test "${enableval}" = "lpt" ; then
479 config_override_filter_type="::gig::vcf_type_lowpassturbo"
480 elif test ! "${enableval}" = "no"; then
481 AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
482 fi
483 ],
484 [config_override_filter_type="no"]
485 )
486 if test ! "$config_override_filter_type" = "no"; then
487 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
488 fi
489
490 AC_ARG_ENABLE(gs-checksum,
491 [ --enable-gs-checksum
492 Enable Roland General Synth SysEx checksum check
493 (default=no). If this is enabled, all GS SysEx
494 messages which do not provide a correct checksum
495 will be ignored. This is disabled by default as
496 not all devices honor GS checksums.],
497 [config_assert_gs_sysex_checksum="yes"],
498 [config_assert_gs_sysex_checksum="no"]
499 )
500 if test "config_assert_gs_sysex_checksum" = "yes"; then
501 AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
502 fi
503
504
505 ###########################################################################
506 # Create Build Files
507
508 AM_CONFIG_HEADER(config.h)
509 AM_INIT_AUTOMAKE(linuxsampler, 0.3.1)
510
511 AC_LANG_CPLUSPLUS
512 AC_PROG_CXX
513
514 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
515 # this, the dlfcn.h check in am_prog_libtool may fail.
516 AC_CHECK_HEADER(stdlib.h)
517
518 AM_PROG_LIBTOOL
519
520 AC_OUTPUT(Makefile man/Makefile man/linuxsampler.1 src/Makefile src/network/Makefile src/engines/Makefile src/engines/gig/Makefile src/engines/common/Makefile src/common/Makefile src/lib/Makefile src/lib/fileloader/Makefile src/lib/fileloader/libgig/Makefile src/testcases/Makefile src/drivers/Makefile src/drivers/audio/Makefile src/drivers/midi/Makefile)
521
522
523 ###########################################################################
524 # Output All Configuration Options
525
526 echo ""
527 echo "#####################################################################"
528 echo "# LinuxSampler Configuration #"
529 echo "#-------------------------------------------------------------------#"
530 echo "# Development Mode: ${config_dev_mode}"
531 echo "# Debug Level: ${config_debug_level}"
532 echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
533 echo "# Preload Samples: ${config_preload_samples}"
534 echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
535 echo "# Maximum Events: ${config_max_events}"
536 echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
537 echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
538 echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
539 echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
540 echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
541 echo "# Stream Size: ${config_stream_size}"
542 echo "# Maximum Disk Streams: ${config_max_streams}"
543 echo "# Maximum Voices: ${config_max_voices}"
544 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
545 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
546 echo "# Filter Update Steps: ${config_filter_update_steps}"
547 echo "# Force Filter Usage: ${config_force_filter}"
548 echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
549 echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
550 echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
551 echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
552 echo "# Override Filter Type: ${config_override_filter_type}"
553 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
554 echo "#-------------------------------------------------------------------#"
555 echo "# Read './configure --help' or file 'configure.in' for details. #"
556 echo "#####################################################################"
557 echo ""
558 echo "Good. Now type 'make' to compile, followed by 'make install' as root."
559 echo ""

  ViewVC Help
Powered by ViewVC