/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Contents of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 716 - (show annotations) (download)
Sun Jul 24 06:57:30 2005 UTC (18 years, 7 months ago) by iliev
Original Path: linuxsampler/trunk/configure.in
File size: 33293 byte(s)
* Added configure option --enable-process-muted-channels
which can be used to enable the processing of muted channels

1 AC_INIT(configure.in)
2
3 #------------------------------------------------------------------------------------
4 # LinuxSampler's / liblinuxsampler's "official" release version:
5
6 LINUXSAMPLER_RELEASE_MAJOR=0
7 LINUXSAMPLER_RELEASE_MINOR=3
8 LINUXSAMPLER_RELEASE_BUILD=3
9
10 #------------------------------------------------------------------------------------
11 # The following is the libtool / shared library version. This doesn't have to
12 # do anything with the release version. It MUST conform to the following rules:
13 #
14 # 1. Start with version information of `0:0:0' for each libtool library.
15 # 2. Update the version information only immediately before a public release of
16 # your software. More frequent updates are unnecessary, and only guarantee
17 # that the current interface number gets larger faster.
18 # 3. If the library source code has changed at all since the last update, then
19 # increment revision (`c:r:a' becomes `c:r+1:a').
20 # 4. If any interfaces have been added, removed, or changed since the last update,
21 # increment current, and set revision to 0.
22 # 5. If any interfaces have been added since the last public release, then increment
23 # age.
24 # 6. If any interfaces have been removed since the last public release, then set age
25 # to 0.
26
27 LIBLINUXSAMPLER_LT_CURRENT=0
28 LIBLINUXSAMPLER_LT_REVISION=0
29 LIBLINUXSAMPLER_LT_AGE=0
30 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31
32 AM_PROG_LIBTOOL
33
34 AC_SUBST(SHLIB_VERSION_ARG)
35 AC_SUBST(SHARED_VERSION_INFO)
36
37 AC_C_BIGENDIAN
38 AC_CANONICAL_SYSTEM
39
40 AC_SUBST(target)
41 AC_SUBST(target_alias)
42 AC_SUBST(target_cpu)
43 AC_SUBST(target_os)
44 AC_SUBST(target_vendor)
45
46
47 ###########################################################################
48 # General Checks
49
50 AC_MSG_CHECKING([whether x86 architecture])
51 def_arch_x86=0
52 case $target_cpu in
53 "i386" | "i486" | "i586" | "i686" | "i786")
54 echo "yes"
55 def_arch_x86=1;;
56 *)
57 echo "no";;
58 esac
59 AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
60
61 # determine the right gcc switch for CPU specific optimizations
62 CXX_CPU_SWITCH=
63 if test "$def_arch_x86" = 1; then
64 CXX_CPU_SWITCH="-march=$target_cpu"
65 elif test "$target_cpu" = "powerpc"; then
66 CXX_CPU_SWITCH="-arch=$target_cpu"
67 fi
68 AC_SUBST([CXX_CPU_SWITCH])
69
70 AC_MSG_CHECKING([whether UNIX98 compatible])
71 AC_LANG_SAVE
72 AC_LANG_C
73 AC_TRY_RUN([
74 #ifndef _GNU_SOURCE
75 #define _GNU_SOURCE 1
76 #endif
77 #include <features.h>
78 void main(void) {
79 #if _XOPEN_SOURCE >= 500
80 exit(0); /* UNIX98 compatible */
81 #else
82 exit(-1); /* not UNIX98 compatible */
83 #endif
84 }
85 ],
86 have_unix98="yes",
87 have_unix98="no",
88 have_unix98="no"
89 )
90 AC_LANG_RESTORE
91 AC_MSG_RESULT([$have_unix98])
92 if test "$have_unix98" = "no"; then
93 if test "x$HAVE_UNIX98" = "x"; then
94 echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
95 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
96 echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
97 echo "have a UNIX98 compatible system."
98 exit -1;
99 fi
100 fi
101
102 # Checks for available audio and MIDI systems / drivers
103 # (we throw an error if there's not at least one system for audio output and MIDI input available)
104 have_midi_input_driver="false"
105 have_audio_output_driver="false"
106
107 AC_CHECK_HEADER(alsa/asoundlib.h,
108 AC_CHECK_LIB(asound, main,
109 have_alsa=1
110 ,
111 have_alsa=0
112 )
113 ,
114 have_alsa=0
115 )
116 if test "$have_alsa" = "1"; then
117 have_midi_input_driver="true"
118 have_audio_output_driver="true";
119 fi
120 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
121 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
122
123 echo -n "checking Alsa version... "
124 AC_LANG_SAVE
125 AC_LANG_C
126 AC_TRY_RUN([
127 #include <alsa/asoundlib.h>
128 void main(void) {
129 /* ensure backward compatibility */
130 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
131 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
132 #endif
133 exit(SND_LIB_MAJOR);
134 }
135 ],
136 alsa_major=0,
137 alsa_major=$?,
138 alsa_major=0
139 )
140 AC_TRY_RUN([
141 #include <alsa/asoundlib.h>
142 void main(void) {
143 /* ensure backward compatibility */
144 #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
145 #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
146 #endif
147 exit(SND_LIB_MINOR);
148 }
149 ],
150 alsa_minor=0,
151 alsa_minor=$?,
152 alsa_minor=0
153 )
154 AC_TRY_RUN([
155 #include <alsa/asoundlib.h>
156 void main(void) {
157 /* ensure backward compatibility */
158 #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
159 #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
160 #endif
161 exit(SND_LIB_SUBMINOR);
162 }
163 ],
164 alsa_subminor=0,
165 alsa_subminor=$?,
166 alsa_subminor=0
167 )
168 AC_LANG_RESTORE
169 echo "$alsa_major.$alsa_minor.$alsa_subminor";
170 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
171 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
172 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
173
174 # JACK
175 PKG_CHECK_MODULES(JACK, jack, HAVE_JACK=true, HAVE_JACK=false)
176 AC_SUBST(JACK_LIBS)
177 AC_SUBST(JACK_CFLAGS)
178 if test $HAVE_JACK = false; then
179 HAVE_JACK=0;
180 else
181 HAVE_JACK=1
182 have_audio_output_driver="true";
183 AC_CHECK_LIB(jack, jack_client_name_size, [AC_DEFINE(HAVE_JACK_CLIENT_NAME_SIZE, 1, [Define to 1 if you have the `jack_client_name_size' function.])], , $JACK_LIBS)
184 fi
185 AM_CONDITIONAL(HAVE_JACK, test $HAVE_JACK = 1)
186 AC_DEFINE_UNQUOTED(HAVE_JACK,$HAVE_JACK,[Define to 1 if you have JACK installed.])
187
188 # MidiShare (Linux, OS X, Windows)
189 AC_CHECK_HEADER(MidiShare.h,
190 AC_CHECK_LIB(MidiShare, MidiCountEvs,
191 have_midishare=1,
192 have_midishare=0
193 )
194 ,
195 have_midishare=0
196 )
197 if test "$have_midishare" = "1"; then
198 have_midi_input_driver="true"
199 fi
200 AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
201 AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
202
203 # CoreMIDI (OS X)
204 AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
205 have_coremidi=1,
206 have_coremidi=0
207 )
208 if test "$have_coremidi" = "1"; then
209 have_midi_input_driver="true"
210 fi
211 AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
212 AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
213
214 # Check presence of libgig
215 libgig_version="2.0.1"
216 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
217 if test "$HAVE_GIG" = "false"; then
218 echo "Required libgig version not found!"
219 echo "You need to have libgig version ${libgig_version} installed!"
220 exit -1;
221 else
222 echo "yes, found libgig $libgig_version"
223 fi
224 AC_SUBST(GIG_CFLAGS)
225 AC_SUBST(GIG_LIBS)
226
227 # SQLITE3
228 PKG_CHECK_MODULES(SQLITE3, sqlite3, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
229 AC_SUBST(SQLITE3_LIBS)
230 AC_SUBST(SQLITE3_CFLAGS)
231 if test $HAVE_SQLITE3 = false; then
232 HAVE_SQLITE3=0;
233 echo "no, support for instrument DB will be disabled!"
234 else
235 HAVE_SQLITE3=1
236 echo "yes"
237 fi
238 AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
239 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you have SQLITE3 installed.])
240
241 if test "$have_midi_input_driver" = "false"; then
242 echo "No supported MIDI input system found!"
243 echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
244 echo "ALSA, MIDIShare, CoreMIDI."
245 echo "If you think you have one of those available on your system, make sure you"
246 echo "also have the respective development (header) files installed."
247 exit -1;
248 fi
249 if test "$have_audio_output_driver" = "false"; then
250 echo "No supported audio output system found!"
251 echo "Sorry, LinuxSampler only supports ALSA and JACK as audio output driver at the moment!"
252 exit -1;
253 fi
254
255
256 ###########################################################################
257 # Handle Configuration Options
258
259 # TODO: should we use AC_ARG_VAR(variable, description) instead?
260
261 AC_ARG_ENABLE(asm,
262 [ --disable-asm
263 Disable hand-crafted assembly optimizations
264 (default=on). LinuxSampler provides CPU specific
265 assembly optimizations for the most important
266 synthesis algorithms. You usually don't want to
267 disable that.],
268 [config_asm="no"],
269 [config_asm="yes"]
270 )
271 if test "$config_asm" = "yes"; then
272 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable hand-crafted asm optimizations.])
273 fi
274
275 AC_ARG_ENABLE(dev-mode,
276 [ --enable-dev-mode
277 Enable development mode (default=no). In that mode
278 we do some extra sanity checks here and there.
279 This helps to spot possible problems, but reduces
280 efficiency a bit],
281 [config_dev_mode="yes"],
282 [config_dev_mode="no"]
283 )
284 if test "$config_dev_mode" = "yes"; then
285 AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
286 fi
287
288 AC_ARG_ENABLE(debug-level,
289 [ --enable-debug-level
290 Specify verbosity of console messages (default=1).
291 The higher the value, the higher will be verbosity.
292 A value of 0 means no console output at all.
293 There's not really an upper limit but the usual
294 level of all messages is currently somewhere less
295 than 10.],
296 [config_debug_level="${enableval}"],
297 [config_debug_level="1"]
298 )
299 AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
300
301 AC_ARG_ENABLE(rt-exceptions,
302 [ --enable-rt-exceptions
303 Enable exceptions in the realtime thread
304 (default=no). If this is enabled, exceptions will
305 be thrown on critical errors in the realtime
306 context as well. Otherwise if disabled
307 segmentation faults will be forced by the
308 application on critical errors.],
309 [config_rt_exceptions="yes"],
310 [config_rt_exceptions="no"]
311 )
312 if test "$config_rt_exceptions" = "yes"; then
313 AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
314 fi
315
316 AC_ARG_ENABLE(preload-samples,
317 [ --enable-preload-samples
318 Due to seeking and latency issues with hard drives
319 we have to cache a small part of samples' head in
320 RAM (default=32768). The higher this value the
321 more memory will be occupied for each sample, but
322 the safer this will be in regards of possible
323 droputs. A 'good' value depends on the running
324 system and usage dependant factors.],
325 [config_preload_samples="${enableval}"],
326 [config_preload_samples="32768"]
327 )
328 AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
329
330 AC_ARG_ENABLE(max-pitch,
331 [ --enable-max-pitch
332 Specify the maximum allowed pitch value in octaves
333 (default=4). To lower memory usage you might want
334 set a smaller value.],
335 [config_max_pitch="${enableval}"],
336 [config_max_pitch="4"]
337 )
338 AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
339
340 AC_ARG_ENABLE(max-events,
341 [ --enable-max-events
342 Specify the maximum allowed amount of events to be
343 processed per fragment (default=1024).],
344 [config_max_events="${enableval}"],
345 [config_max_events="1024"]
346 )
347 AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
348
349 AC_ARG_ENABLE(eg-bottom,
350 [ --enable-eg-bottom
351 Bottom limit of envelope generators
352 (default=0.001). Certain kinds of curve types like
353 exponential curves converge against 0 but never
354 reach 0. So we have to define a certain low value
355 after which we should consider all smaller values
356 to be 'almost zero'. The smaller this value, the
357 longer will voices survive in EG's release stage
358 and thus waste voices. If this value is too high
359 will cause click sounds though.],
360 [config_eg_bottom="${enableval}"],
361 [config_eg_bottom="0.001"]
362 )
363 AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
364
365 AC_ARG_ENABLE(eg-min-release-time,
366 [ --enable-eg-min-release-time
367 Specify the lowest allowed release time in seconds
368 (default=0.0025). This value will also be used to
369 ramp down voices on voice stealing. This value
370 should always be less than the period time of the
371 used audio driver, as in case of voice stealing
372 the killed voice needs to be completely ramped
373 down in the same fragment.],
374 [config_eg_min_release_time="${enableval}"],
375 [config_eg_min_release_time="0.0025"]
376 )
377 AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
378
379 AC_ARG_ENABLE(refill-streams,
380 [ --enable-refill-streams
381 Number of streams that should be refilled in each
382 disk thread cycle (default=4).],
383 [config_refill_streams="${enableval}"],
384 [config_refill_streams="4"]
385 )
386 AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
387
388 AC_ARG_ENABLE(stream-min-refill,
389 [ --enable-stream-min-refill
390 Minimum refill size for disk streams (default=1024).
391 The disk thread will go to sleep for a while if no
392 stream had to be refilled more than this value in
393 a disk thread cycle.],
394 [config_stream_min_refill="${enableval}"],
395 [config_stream_min_refill="1024"]
396 )
397 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
398
399 AC_ARG_ENABLE(stream-max-refill,
400 [ --enable-stream-max-refill
401 Maximum refill size for disk streams
402 (default=65536). The disk thread will refill
403 each stream only by a size of this value per
404 disk thread cycle.],
405 [config_stream_max_refill="${enableval}"],
406 [config_stream_max_refill="65536"]
407 )
408 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
409
410 AC_ARG_ENABLE(stream-size,
411 [ --enable-stream-size
412 Size of each stream's ring buffer in sample points
413 (default=262144).],
414 [config_stream_size="${enableval}"],
415 [config_stream_size="262144"]
416 )
417 AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
418
419 AC_ARG_ENABLE(max-streams,
420 [ --enable-max-streams
421 Maximum amount of disk streams (default=90). This
422 value should always be higher than the maximum
423 amount of voices.],
424 [config_max_streams="${enableval}"],
425 [config_max_streams="90"]
426 )
427 AC_DEFINE_UNQUOTED(CONFIG_MAX_STREAMS, $config_max_streams, [Define max. streams.])
428
429 AC_ARG_ENABLE(max-voices,
430 [ --enable-max-voices
431 Maximum amount of voices (default=64). This value
432 should always be lower than the maximum amount of
433 disk streams.],
434 [config_max_voices="${enableval}"],
435 [config_max_voices="64"]
436 )
437 AC_DEFINE_UNQUOTED(CONFIG_MAX_VOICES, $config_max_voices, [Define max. voices.])
438
439 AC_ARG_ENABLE(voice-steal-algo,
440 [ --enable-voice-steal-algo
441 Voice stealing algorithm to be used. Currently
442 available options:
443 none:
444 Disable voice stealing completely.
445 oldestvoiceonkey (default):
446 Try to kill a voice on the same key first,
447 if no success, proceed with the oldest key.
448 oldestkey:
449 Try to kill a voice from the oldest active
450 key.],
451 [ if test ! "(" "${enableval}" = "none" \
452 -o "${enableval}" = "oldestvoiceonkey" \
453 -o "${enableval}" = "oldestkey" ")" ; then
454 AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
455 else
456 config_voice_steal_algo="${enableval}"
457 fi
458 ],
459 [config_voice_steal_algo="oldestvoiceonkey"]
460 )
461 AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
462
463 AC_ARG_ENABLE(sysex-buffer-size,
464 [ --enable-sysex-buffer-size
465 System Exclusive Message buffer size in kB
466 (default=2048).],
467 [config_sysex_buffer_size="${enableval}"],
468 [config_sysex_buffer_size="2048"]
469 )
470 AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
471
472 AC_ARG_ENABLE(filter-update-steps,
473 [ --enable-filter-update-steps
474 Amount of sample points after which filter
475 parameters (cutoff, resonance) are going to be
476 updated (default=64). Higher value means less CPU
477 load, but also worse parameter resolution, this
478 value will be aligned to a power of two.],
479 [config_filter_update_steps="${enableval}"],
480 [config_filter_update_steps="64"]
481 )
482 AC_DEFINE_UNQUOTED(CONFIG_FILTER_UPDATE_STEPS, $config_filter_update_steps, [Define amount of steps to refresh filter coefficients.])
483
484 AC_ARG_ENABLE(force-filter,
485 [ --enable-force-filter
486 If enabled will force filter to be used even if
487 no usage was define in instrument patch files.
488 (default=no).],
489 [config_force_filter="yes"],
490 [config_force_filter="no"]
491 )
492 if test "$config_force_filter" = "yes"; then
493 AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
494 fi
495
496 AC_ARG_ENABLE(filter-cutoff-min,
497 [ --enable-filter-cutoff-min
498 Minimum filter cutoff frequency in Hz
499 (default=100.0).],
500 [config_filter_cutoff_min="${enableval}"],
501 [config_filter_cutoff_min="100.0"]
502 )
503 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
504
505 AC_ARG_ENABLE(filter-cutoff-max,
506 [ --enable-filter-cutoff-max
507 Maximum filter cutoff frequency in Hz
508 (default=10000.0).],
509 [config_filter_cutoff_max="${enableval}"],
510 [config_filter_cutoff_max="10000.0"]
511 )
512 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
513
514 AC_ARG_ENABLE(override-cutoff-ctrl,
515 [ --enable-override-cutoff-ctrl
516 Override filter cutoff MIDI controller (default=no).
517 Note: you have to define the MIDI controller number
518 here, it's not a boolean parameter type! If this
519 option is used, controller number given by
520 instrument patch will be ignored and instead this
521 supplied value will be used.],
522 [config_override_cutoff_ctrl="${enableval}"],
523 [config_override_cutoff_ctrl="no"]
524 )
525 if test ! "$config_override_cutoff_ctrl" = "no"; then
526 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
527 fi
528
529 AC_ARG_ENABLE(override-resonance-ctrl,
530 [ --enable-override-resonance-ctrl
531 Override filter resonance MIDI controller
532 (default=no). Note: you have to define the MIDI
533 controller number here, it's not a boolean
534 parameter type! If this option is used, controller
535 number given by instrument patch will be ignored
536 and instead this supplied value will be used.],
537 [config_override_resonance_ctrl="${enableval}"],
538 [config_override_resonance_ctrl="no"]
539 )
540 if test ! "$config_override_resonance_ctrl" = "no"; then
541 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
542 fi
543
544 AC_ARG_ENABLE(override-filter-type,
545 [ --enable-override-filter-type
546 Override filter type (default=no). Options:
547 hp: for highpass
548 bp: for bandpass
549 br: for bandreject
550 lp: for lowpass
551 lpt: for lowpass turbo],
552 [ if test "${enableval}" = "hp" ; then
553 config_override_filter_type="::gig::vcf_type_highpass"
554 elif test "${enableval}" = "bp" ; then
555 config_override_filter_type="::gig::vcf_type_bandpass"
556 elif test "${enableval}" = "br" ; then
557 config_override_filter_type="::gig::vcf_type_bandreject"
558 elif test "${enableval}" = "lp" ; then
559 config_override_filter_type="::gig::vcf_type_lowpass"
560 elif test "${enableval}" = "lpt" ; then
561 config_override_filter_type="::gig::vcf_type_lowpassturbo"
562 elif test ! "${enableval}" = "no"; then
563 AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
564 fi
565 ],
566 [config_override_filter_type="no"]
567 )
568 if test ! "$config_override_filter_type" = "no"; then
569 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
570 fi
571
572 AC_ARG_ENABLE(gs-checksum,
573 [ --enable-gs-checksum
574 Enable Roland General Synth SysEx checksum check
575 (default=no). If this is enabled, all GS SysEx
576 messages which do not provide a correct checksum
577 will be ignored. This is disabled by default as
578 not all devices honor GS checksums.],
579 [config_assert_gs_sysex_checksum="yes"],
580 [config_assert_gs_sysex_checksum="no"]
581 )
582 if test "config_assert_gs_sysex_checksum" = "yes"; then
583 AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
584 fi
585
586 AC_ARG_ENABLE(signed-triang-algo,
587 [ --enable-signed-triang-algo
588 Signed triangular wave algorithm to be used (e.g. for LFOs).
589 Currently available options:
590 intmath:
591 Uses integer math without any branch will then be
592 converted to floating point value for each sample point.
593 This int->float conversion might hurt on some systems.
594 diharmonic:
595 The triangular wave will be approximated by adding two
596 sinusoidials. This solution might especially hurt on
597 systems with weak floating point unit.
598 benchmark (default):
599 This is not an algorithm. Use this option if the
600 appropriate algorithm should be automatically
601 chosen by the configure script by performing a
602 benchmark between the algorithms mentioned above.
603 This will NOT work for cross compilation!],
604 [ if test ! "(" "${enableval}" = "intmath" \
605 -o "${enableval}" = "diharmonic" ")" ; then
606 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
607 else
608 config_signed_triang_algo="${enableval}"
609 fi
610 ],
611 [config_signed_triang_algo="benchmark"]
612 )
613
614 AC_ARG_ENABLE(unsigned-triang-algo,
615 [ --enable-unsigned-triang-algo
616 Unsigned triangular wave algorithm to be used (e.g. for LFOs).
617 Currently available options:
618 intmath:
619 Uses integer math without any branch will then be
620 converted to floating point value for each sample point.
621 This int->float conversion might hurt on some systems.
622 diharmonic:
623 The triangular wave will be approximated by adding two
624 sinusoidials. This solution might especially hurt on
625 systems with weak floating point unit.
626 benchmark (default):
627 This is not an algorithm. Use this option if the
628 appropriate algorithm should be automatically
629 chosen by the configure script by performing a
630 benchmark between the algorithms mentioned above.
631 This will NOT work for cross compilation!],
632 [ if test ! "(" "${enableval}" = "intmath" \
633 -o "${enableval}" = "diharmonic" ")" ; then
634 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
635 else
636 config_unsigned_triang_algo="${enableval}"
637 fi
638 ],
639 [config_unsigned_triang_algo="benchmark"]
640 )
641
642 AC_ARG_ENABLE(process-muted-channels,
643 [ --enable-process-muted-channels
644 Enable processing of muted channels (default=no).
645 In that mode all MIDI events in the muted channels
646 will be processed. This will provide information
647 about the active voices in the muted channels and
648 will not discard notes, triggered in mute mode,
649 when the channel is unmuted. But also will reduce
650 the efficiency.],
651 [config_process_muted_channels="yes"],
652 [config_process_muted_channels="no"]
653 )
654 if test "$config_process_muted_channels" = "yes"; then
655 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
656 fi
657
658
659 ###########################################################################
660 # Automatic Benchmarks (to detect the best algorithms for the system)
661
662 AC_LANG_SAVE
663
664 if test "$config_signed_triang_algo" = "benchmark"; then
665 echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
666 AC_LANG_CPLUSPLUS
667 AC_TRY_RUN([
668 #define SIGNED 1
669 #define SILENT 1
670 #include "benchmarks/triang.cpp"
671 ],
672 triang_signed=0,
673 triang_signed=$?,
674 triang_signed=0
675 )
676 if test "$triang_signed" = "2"; then
677 config_signed_triang_algo="intmath"
678 echo "integer math"
679 elif test "$triang_signed" = "3"; then
680 config_signed_triang_algo="diharmonic"
681 echo "di harmonics"
682 else
683 echo "Benchmark of signed triangular wave algorithms failed!"
684 echo "Maybe you are doing cross compilation? In that case you have to select"
685 echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
686 echo "Call './configure --help' for further information or read configure.in."
687 exit -1;
688 fi
689 fi
690 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, signed_triang_algo_${config_signed_triang_algo}, [Define signed triangular wave algorithm to be used.])
691
692 if test "$config_unsigned_triang_algo" = "benchmark"; then
693 echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
694 AC_LANG_CPLUSPLUS
695 AC_TRY_RUN([
696 #define SIGNED 0
697 #define SILENT 1
698 #include "benchmarks/triang.cpp"
699 ],
700 triang_unsigned=0,
701 triang_unsigned=$?,
702 triang_unsigned=0
703 )
704 if test "$triang_unsigned" = "2"; then
705 config_unsigned_triang_algo="intmath"
706 echo "integer math"
707 elif test "$triang_unsigned" = "3"; then
708 config_unsigned_triang_algo="diharmonic"
709 echo "di harmonics"
710 else
711 echo "Benchmark of unsigned triangular wave algorithms failed!"
712 echo "Maybe you are doing cross compilation? In that case you have to select"
713 echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
714 echo "Call './configure --help' for further information or read configure.in."
715 exit -1;
716 fi
717 fi
718 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, unsigned_triang_algo_${config_unsigned_triang_algo}, [Define unsigned triangular wave algorithm to be used.])
719
720 AC_LANG_RESTORE
721
722
723 ###########################################################################
724 # Create Build Files
725
726 AM_CONFIG_HEADER(config.h)
727 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
728
729 AC_LANG_CPLUSPLUS
730 AC_PROG_CXX
731
732 # some gcc 4.0 versions need -msse for SSE register allocations
733 if test "$config_asm" = "yes"; then
734 if test "$def_arch_x86" = 1; then
735 CXXFLAGS="$CXXFLAGS -msse"
736 fi
737 fi
738
739 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
740 # this, the dlfcn.h check in am_prog_libtool may fail.
741 AC_CHECK_HEADER(stdlib.h)
742
743 AC_OUTPUT( \
744 Makefile \
745 man/Makefile \
746 man/linuxsampler.1 \
747 src/Makefile \
748 src/network/Makefile \
749 src/engines/Makefile \
750 src/engines/gig/Makefile \
751 src/engines/common/Makefile \
752 src/common/Makefile src/lib/Makefile \
753 src/lib/fileloader/Makefile \
754 src/lib/fileloader/libgig/Makefile \
755 src/testcases/Makefile \
756 src/drivers/Makefile \
757 src/drivers/audio/Makefile \
758 src/drivers/midi/Makefile \
759 linuxsampler.spec \
760 debian/Makefile \
761 Artwork/Makefile \
762 scripts/Makefile \
763 osx/Makefile \
764 osx/LinuxSampler.xcode/Makefile \
765 Documentation/Makefile \
766 Documentation/Engines/Makefile \
767 Documentation/Engines/gig/Makefile \
768 linuxsampler.pc \
769 Doxyfile \
770 )
771
772
773 ###########################################################################
774 # Output All Configuration Options
775
776 echo ""
777 echo "#####################################################################"
778 echo "# LinuxSampler Configuration #"
779 echo "#-------------------------------------------------------------------#"
780 echo "# Assembly Optimizations: ${config_asm}"
781 echo "# Development Mode: ${config_dev_mode}"
782 echo "# Debug Level: ${config_debug_level}"
783 echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
784 echo "# Preload Samples: ${config_preload_samples}"
785 echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
786 echo "# Maximum Events: ${config_max_events}"
787 echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
788 echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
789 echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
790 echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
791 echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
792 echo "# Stream Size: ${config_stream_size}"
793 echo "# Maximum Disk Streams: ${config_max_streams}"
794 echo "# Maximum Voices: ${config_max_voices}"
795 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
796 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
797 echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
798 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
799 echo "# Filter Update Steps: ${config_filter_update_steps}"
800 echo "# Force Filter Usage: ${config_force_filter}"
801 echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
802 echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
803 echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
804 echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
805 echo "# Override Filter Type: ${config_override_filter_type}"
806 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
807 echo "# Process Muted Channels: ${config_process_muted_channels}"
808 echo "#-------------------------------------------------------------------#"
809 echo "# Read './configure --help' or file 'configure.in' for details. #"
810 echo "#####################################################################"
811 echo ""
812 echo "Good. Now type 'make' to compile, followed by 'make install' as root."
813 echo ""

  ViewVC Help
Powered by ViewVC