/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Contents of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 738 - (show annotations) (download)
Tue Aug 16 17:14:25 2005 UTC (18 years, 7 months ago) by schoenebeck
Original Path: linuxsampler/trunk/configure.in
File size: 34449 byte(s)
* extensive synthesis optimization: reimplementation of EGs and LFO(s),
  removed synthesis parameter prerendering and the synthesis parameter
  matrix in general, splitting each audio fragment into subfragments now
  where each subfragment uses constant synthesis parameters
  (everything's still very buggy ATM)

1 AC_INIT(configure.in)
2
3 #------------------------------------------------------------------------------------
4 # LinuxSampler's / liblinuxsampler's "official" release version:
5
6 LINUXSAMPLER_RELEASE_MAJOR=0
7 LINUXSAMPLER_RELEASE_MINOR=3
8 LINUXSAMPLER_RELEASE_BUILD=3
9
10 #------------------------------------------------------------------------------------
11 # The following is the libtool / shared library version. This doesn't have to
12 # do anything with the release version. It MUST conform to the following rules:
13 #
14 # 1. Start with version information of `0:0:0' for each libtool library.
15 # 2. Update the version information only immediately before a public release of
16 # your software. More frequent updates are unnecessary, and only guarantee
17 # that the current interface number gets larger faster.
18 # 3. If the library source code has changed at all since the last update, then
19 # increment revision (`c:r:a' becomes `c:r+1:a').
20 # 4. If any interfaces have been added, removed, or changed since the last update,
21 # increment current, and set revision to 0.
22 # 5. If any interfaces have been added since the last public release, then increment
23 # age.
24 # 6. If any interfaces have been removed since the last public release, then set age
25 # to 0.
26
27 LIBLINUXSAMPLER_LT_CURRENT=0
28 LIBLINUXSAMPLER_LT_REVISION=0
29 LIBLINUXSAMPLER_LT_AGE=0
30 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31
32 AM_PROG_LIBTOOL
33
34 AC_SUBST(SHLIB_VERSION_ARG)
35 AC_SUBST(SHARED_VERSION_INFO)
36
37 AC_C_BIGENDIAN
38 AC_CANONICAL_SYSTEM
39
40 AC_SUBST(target)
41 AC_SUBST(target_alias)
42 AC_SUBST(target_cpu)
43 AC_SUBST(target_os)
44 AC_SUBST(target_vendor)
45
46
47 ###########################################################################
48 # General Checks
49
50 AC_MSG_CHECKING([whether x86 architecture])
51 def_arch_x86=0
52 case $target_cpu in
53 "i386" | "i486" | "i586" | "i686" | "i786")
54 echo "yes"
55 def_arch_x86=1;;
56 *)
57 echo "no";;
58 esac
59 AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
60
61 # determine the right gcc switch for CPU specific optimizations
62 CXX_CPU_SWITCH=
63 if test "$def_arch_x86" = 1; then
64 CXX_CPU_SWITCH="-march=$target_cpu"
65 elif test "$target_cpu" = "powerpc"; then
66 CXX_CPU_SWITCH="-arch=$target_cpu"
67 fi
68 AC_SUBST([CXX_CPU_SWITCH])
69
70 AC_MSG_CHECKING([whether UNIX98 compatible])
71 AC_LANG_SAVE
72 AC_LANG_C
73 AC_TRY_RUN([
74 #ifndef _GNU_SOURCE
75 #define _GNU_SOURCE 1
76 #endif
77 #include <features.h>
78 void main(void) {
79 #if _XOPEN_SOURCE >= 500
80 exit(0); /* UNIX98 compatible */
81 #else
82 exit(-1); /* not UNIX98 compatible */
83 #endif
84 }
85 ],
86 have_unix98="yes",
87 have_unix98="no",
88 have_unix98="no"
89 )
90 AC_LANG_RESTORE
91 AC_MSG_RESULT([$have_unix98])
92 if test "$have_unix98" = "no"; then
93 if test "x$HAVE_UNIX98" = "x"; then
94 echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
95 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
96 echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
97 echo "have a UNIX98 compatible system."
98 exit -1;
99 fi
100 fi
101
102 # Checks for available audio and MIDI systems / drivers
103 # (we throw an error if there's not at least one system for audio output and MIDI input available)
104 have_midi_input_driver="false"
105 have_audio_output_driver="false"
106
107 AC_CHECK_HEADER(alsa/asoundlib.h,
108 AC_CHECK_LIB(asound, main,
109 have_alsa=1
110 ,
111 have_alsa=0
112 )
113 ,
114 have_alsa=0
115 )
116 if test "$have_alsa" = "1"; then
117 have_midi_input_driver="true"
118 have_audio_output_driver="true";
119 fi
120 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
121 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
122
123 echo -n "checking Alsa version... "
124 AC_LANG_SAVE
125 AC_LANG_C
126 AC_TRY_RUN([
127 #include <alsa/asoundlib.h>
128 void main(void) {
129 /* ensure backward compatibility */
130 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
131 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
132 #endif
133 exit(SND_LIB_MAJOR);
134 }
135 ],
136 alsa_major=0,
137 alsa_major=$?,
138 alsa_major=0
139 )
140 AC_TRY_RUN([
141 #include <alsa/asoundlib.h>
142 void main(void) {
143 /* ensure backward compatibility */
144 #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
145 #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
146 #endif
147 exit(SND_LIB_MINOR);
148 }
149 ],
150 alsa_minor=0,
151 alsa_minor=$?,
152 alsa_minor=0
153 )
154 AC_TRY_RUN([
155 #include <alsa/asoundlib.h>
156 void main(void) {
157 /* ensure backward compatibility */
158 #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
159 #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
160 #endif
161 exit(SND_LIB_SUBMINOR);
162 }
163 ],
164 alsa_subminor=0,
165 alsa_subminor=$?,
166 alsa_subminor=0
167 )
168 AC_LANG_RESTORE
169 echo "$alsa_major.$alsa_minor.$alsa_subminor";
170 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
171 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
172 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
173
174 # JACK
175 PKG_CHECK_MODULES(JACK, jack, HAVE_JACK=true, HAVE_JACK=false)
176 AC_SUBST(JACK_LIBS)
177 AC_SUBST(JACK_CFLAGS)
178 if test $HAVE_JACK = false; then
179 HAVE_JACK=0;
180 else
181 HAVE_JACK=1
182 have_audio_output_driver="true";
183 AC_CHECK_LIB(jack, jack_client_name_size, [AC_DEFINE(HAVE_JACK_CLIENT_NAME_SIZE, 1, [Define to 1 if you have the `jack_client_name_size' function.])], , $JACK_LIBS)
184 fi
185 AM_CONDITIONAL(HAVE_JACK, test $HAVE_JACK = 1)
186 AC_DEFINE_UNQUOTED(HAVE_JACK,$HAVE_JACK,[Define to 1 if you have JACK installed.])
187
188 # MidiShare (Linux, OS X, Windows)
189 AC_CHECK_HEADER(MidiShare.h,
190 AC_CHECK_LIB(MidiShare, MidiCountEvs,
191 have_midishare=1,
192 have_midishare=0
193 )
194 ,
195 have_midishare=0
196 )
197 if test "$have_midishare" = "1"; then
198 have_midi_input_driver="true"
199 fi
200 AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
201 AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
202
203 # CoreMIDI (OS X)
204 AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
205 have_coremidi=1,
206 have_coremidi=0
207 )
208 if test "$have_coremidi" = "1"; then
209 have_midi_input_driver="true"
210 fi
211 AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
212 AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
213
214 # Check presence of libgig
215 libgig_version="2.0.2"
216 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
217 if test "$HAVE_GIG" = "false"; then
218 echo "Required libgig version not found!"
219 echo "You need to have libgig version ${libgig_version} installed!"
220 exit -1;
221 else
222 echo "yes, found libgig $libgig_version"
223 fi
224 AC_SUBST(GIG_CFLAGS)
225 AC_SUBST(GIG_LIBS)
226
227 # SQLITE3
228 PKG_CHECK_MODULES(SQLITE3, sqlite3, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
229 AC_SUBST(SQLITE3_LIBS)
230 AC_SUBST(SQLITE3_CFLAGS)
231 if test $HAVE_SQLITE3 = false; then
232 HAVE_SQLITE3=0;
233 echo "no, support for instrument DB will be disabled!"
234 else
235 HAVE_SQLITE3=1
236 echo "yes"
237 fi
238 AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
239 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you have SQLITE3 installed.])
240
241 if test "$have_midi_input_driver" = "false"; then
242 echo "No supported MIDI input system found!"
243 echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
244 echo "ALSA, MIDIShare, CoreMIDI."
245 echo "If you think you have one of those available on your system, make sure you"
246 echo "also have the respective development (header) files installed."
247 exit -1;
248 fi
249 if test "$have_audio_output_driver" = "false"; then
250 echo "No supported audio output system found!"
251 echo "Sorry, LinuxSampler only supports ALSA and JACK as audio output driver at the moment!"
252 exit -1;
253 fi
254
255
256 ###########################################################################
257 # Handle Configuration Options
258
259 # TODO: should we use AC_ARG_VAR(variable, description) instead?
260
261 AC_ARG_ENABLE(asm,
262 [ --enable-asm
263 Enable hand-crafted assembly optimizations
264 (default=off). LinuxSampler provides CPU specific
265 assembly optimizations for the most important
266 synthesis algorithms. This is currently disabled
267 by default since current asm code is broken.],
268 [config_asm="yes"],
269 [config_asm="no"]
270 )
271 if test "$config_asm" = "yes"; then
272 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable hand-crafted asm optimizations.])
273 fi
274
275 AC_ARG_ENABLE(dev-mode,
276 [ --disable-dev-mode
277 Disable development mode (default=on). In that mode
278 we do some extra sanity checks here and there.
279 This helps to spot possible problems, but reduces
280 efficiency a bit],
281 [config_dev_mode="no"],
282 [config_dev_mode="yes"]
283 )
284 if test "$config_dev_mode" = "yes"; then
285 AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
286 fi
287
288 AC_ARG_ENABLE(debug-level,
289 [ --enable-debug-level
290 Specify verbosity of console messages (default=1).
291 The higher the value, the higher will be verbosity.
292 A value of 0 means no console output at all.
293 There's not really an upper limit but the usual
294 level of all messages is currently somewhere less
295 than 10.],
296 [config_debug_level="${enableval}"],
297 [config_debug_level="1"]
298 )
299 AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
300
301 AC_ARG_ENABLE(rt-exceptions,
302 [ --enable-rt-exceptions
303 Enable exceptions in the realtime thread
304 (default=no). If this is enabled, exceptions will
305 be thrown on critical errors in the realtime
306 context as well. Otherwise if disabled
307 segmentation faults will be forced by the
308 application on critical errors.],
309 [config_rt_exceptions="yes"],
310 [config_rt_exceptions="no"]
311 )
312 if test "$config_rt_exceptions" = "yes"; then
313 AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
314 fi
315
316 AC_ARG_ENABLE(preload-samples,
317 [ --enable-preload-samples
318 Due to seeking and latency issues with hard drives
319 we have to cache a small part of samples' head in
320 RAM (default=32768). The higher this value the
321 more memory will be occupied for each sample, but
322 the safer this will be in regards of possible
323 droputs. A 'good' value depends on the running
324 system and usage dependant factors.],
325 [config_preload_samples="${enableval}"],
326 [config_preload_samples="32768"]
327 )
328 AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
329
330 AC_ARG_ENABLE(max-pitch,
331 [ --enable-max-pitch
332 Specify the maximum allowed pitch value in octaves
333 (default=4). To lower memory usage you might want
334 set a smaller value.],
335 [config_max_pitch="${enableval}"],
336 [config_max_pitch="4"]
337 )
338 AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
339
340 AC_ARG_ENABLE(max-events,
341 [ --enable-max-events
342 Specify the maximum allowed amount of events to be
343 processed per fragment (default=1024).],
344 [config_max_events="${enableval}"],
345 [config_max_events="1024"]
346 )
347 AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
348
349 AC_ARG_ENABLE(eg-bottom,
350 [ --enable-eg-bottom
351 Bottom limit of envelope generators
352 (default=0.001). Certain kinds of curve types like
353 exponential curves converge against 0 but never
354 reach 0. So we have to define a certain low value
355 after which we should consider all smaller values
356 to be 'almost zero'. The smaller this value, the
357 longer will voices survive in EG's release stage
358 and thus waste voices. If this value is too high
359 will cause click sounds though.],
360 [config_eg_bottom="${enableval}"],
361 [config_eg_bottom="0.001"]
362 )
363 AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
364
365 AC_ARG_ENABLE(eg-min-release-time,
366 [ --enable-eg-min-release-time
367 Specify the lowest allowed release time in seconds
368 (default=0.0025). This value will also be used to
369 ramp down voices on voice stealing. This value
370 should always be less than the period time of the
371 used audio driver, as in case of voice stealing
372 the killed voice needs to be completely ramped
373 down in the same fragment.],
374 [config_eg_min_release_time="${enableval}"],
375 [config_eg_min_release_time="0.0025"]
376 )
377 AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
378
379 AC_ARG_ENABLE(refill-streams,
380 [ --enable-refill-streams
381 Number of streams that should be refilled in each
382 disk thread cycle (default=4).],
383 [config_refill_streams="${enableval}"],
384 [config_refill_streams="4"]
385 )
386 AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
387
388 AC_ARG_ENABLE(stream-min-refill,
389 [ --enable-stream-min-refill
390 Minimum refill size for disk streams (default=1024).
391 The disk thread will go to sleep for a while if no
392 stream had to be refilled more than this value in
393 a disk thread cycle.],
394 [config_stream_min_refill="${enableval}"],
395 [config_stream_min_refill="1024"]
396 )
397 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
398
399 AC_ARG_ENABLE(stream-max-refill,
400 [ --enable-stream-max-refill
401 Maximum refill size for disk streams
402 (default=65536). The disk thread will refill
403 each stream only by a size of this value per
404 disk thread cycle.],
405 [config_stream_max_refill="${enableval}"],
406 [config_stream_max_refill="65536"]
407 )
408 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
409
410 AC_ARG_ENABLE(stream-size,
411 [ --enable-stream-size
412 Size of each stream's ring buffer in sample points
413 (default=262144).],
414 [config_stream_size="${enableval}"],
415 [config_stream_size="262144"]
416 )
417 AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
418
419 AC_ARG_ENABLE(max-streams,
420 [ --enable-max-streams
421 Maximum amount of disk streams (default=90). This
422 value should always be higher than the maximum
423 amount of voices.],
424 [config_max_streams="${enableval}"],
425 [config_max_streams="90"]
426 )
427 AC_DEFINE_UNQUOTED(CONFIG_MAX_STREAMS, $config_max_streams, [Define max. streams.])
428
429 AC_ARG_ENABLE(max-voices,
430 [ --enable-max-voices
431 Maximum amount of voices (default=64). This value
432 should always be lower than the maximum amount of
433 disk streams.],
434 [config_max_voices="${enableval}"],
435 [config_max_voices="64"]
436 )
437 AC_DEFINE_UNQUOTED(CONFIG_MAX_VOICES, $config_max_voices, [Define max. voices.])
438
439 AC_ARG_ENABLE(subfragment-size,
440 [ --enable-subfragment-size
441 Every audio fragment will be splitted into
442 subfragments. Where each subfragment renders
443 audio with constant synthesis parameters. This is
444 done for efficiency reasons. This parameter
445 defines the default size of a subfragment in
446 sample points. A large value means less CPU time
447 whereas a low value means better audio quality
448 (default=32).],
449 [config_subfragment_size="${enableval}"],
450 [config_subfragment_size="32"]
451 )
452 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
453
454 AC_ARG_ENABLE(voice-steal-algo,
455 [ --enable-voice-steal-algo
456 Voice stealing algorithm to be used. Currently
457 available options:
458 none:
459 Disable voice stealing completely.
460 oldestvoiceonkey (default):
461 Try to kill a voice on the same key first,
462 if no success, proceed with the oldest key.
463 oldestkey:
464 Try to kill a voice from the oldest active
465 key.],
466 [ if test ! "(" "${enableval}" = "none" \
467 -o "${enableval}" = "oldestvoiceonkey" \
468 -o "${enableval}" = "oldestkey" ")" ; then
469 AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
470 else
471 config_voice_steal_algo="${enableval}"
472 fi
473 ],
474 [config_voice_steal_algo="oldestvoiceonkey"]
475 )
476 AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
477
478 AC_ARG_ENABLE(sysex-buffer-size,
479 [ --enable-sysex-buffer-size
480 System Exclusive Message buffer size in kB
481 (default=2048).],
482 [config_sysex_buffer_size="${enableval}"],
483 [config_sysex_buffer_size="2048"]
484 )
485 AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
486
487 AC_ARG_ENABLE(force-filter,
488 [ --enable-force-filter
489 If enabled will force filter to be used even if
490 no usage was define in instrument patch files.
491 (default=no).],
492 [config_force_filter="yes"],
493 [config_force_filter="no"]
494 )
495 if test "$config_force_filter" = "yes"; then
496 AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
497 fi
498
499 AC_ARG_ENABLE(filter-cutoff-min,
500 [ --enable-filter-cutoff-min
501 Minimum filter cutoff frequency in Hz
502 (default=100.0).],
503 [config_filter_cutoff_min="${enableval}"],
504 [config_filter_cutoff_min="100.0"]
505 )
506 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
507
508 AC_ARG_ENABLE(filter-cutoff-max,
509 [ --enable-filter-cutoff-max
510 Maximum filter cutoff frequency in Hz
511 (default=10000.0).],
512 [config_filter_cutoff_max="${enableval}"],
513 [config_filter_cutoff_max="10000.0"]
514 )
515 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
516
517 AC_ARG_ENABLE(override-cutoff-ctrl,
518 [ --enable-override-cutoff-ctrl
519 Override filter cutoff MIDI controller (default=no).
520 Note: you have to define the MIDI controller number
521 here, it's not a boolean parameter type! If this
522 option is used, controller number given by
523 instrument patch will be ignored and instead this
524 supplied value will be used.],
525 [config_override_cutoff_ctrl="${enableval}"],
526 [config_override_cutoff_ctrl="no"]
527 )
528 if test ! "$config_override_cutoff_ctrl" = "no"; then
529 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
530 fi
531
532 AC_ARG_ENABLE(override-resonance-ctrl,
533 [ --enable-override-resonance-ctrl
534 Override filter resonance MIDI controller
535 (default=no). Note: you have to define the MIDI
536 controller number here, it's not a boolean
537 parameter type! If this option is used, controller
538 number given by instrument patch will be ignored
539 and instead this supplied value will be used.],
540 [config_override_resonance_ctrl="${enableval}"],
541 [config_override_resonance_ctrl="no"]
542 )
543 if test ! "$config_override_resonance_ctrl" = "no"; then
544 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
545 fi
546
547 AC_ARG_ENABLE(override-filter-type,
548 [ --enable-override-filter-type
549 Override filter type (default=no). Options:
550 hp: for highpass
551 bp: for bandpass
552 br: for bandreject
553 lp: for lowpass
554 lpt: for lowpass turbo],
555 [ if test "${enableval}" = "hp" ; then
556 config_override_filter_type="::gig::vcf_type_highpass"
557 elif test "${enableval}" = "bp" ; then
558 config_override_filter_type="::gig::vcf_type_bandpass"
559 elif test "${enableval}" = "br" ; then
560 config_override_filter_type="::gig::vcf_type_bandreject"
561 elif test "${enableval}" = "lp" ; then
562 config_override_filter_type="::gig::vcf_type_lowpass"
563 elif test "${enableval}" = "lpt" ; then
564 config_override_filter_type="::gig::vcf_type_lowpassturbo"
565 elif test ! "${enableval}" = "no"; then
566 AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
567 fi
568 ],
569 [config_override_filter_type="no"]
570 )
571 if test ! "$config_override_filter_type" = "no"; then
572 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
573 fi
574
575 AC_ARG_ENABLE(gs-checksum,
576 [ --enable-gs-checksum
577 Enable Roland General Synth SysEx checksum check
578 (default=no). If this is enabled, all GS SysEx
579 messages which do not provide a correct checksum
580 will be ignored. This is disabled by default as
581 not all devices honor GS checksums.],
582 [config_assert_gs_sysex_checksum="yes"],
583 [config_assert_gs_sysex_checksum="no"]
584 )
585 if test "config_assert_gs_sysex_checksum" = "yes"; then
586 AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
587 fi
588
589 AC_ARG_ENABLE(signed-triang-algo,
590 [ --enable-signed-triang-algo
591 Signed triangular wave algorithm to be used (e.g. for LFOs).
592 Currently available options:
593 intmath:
594 Uses integer math without any branch will then be
595 converted to floating point value for each sample point.
596 This int->float conversion might hurt on some systems.
597 intmathabs:
598 Similar to intmath but uses abs() function.
599 Depending on compiler and platrofm this could
600 perform better than integer math as it avoids
601 an extra integer multiply instruction.
602
603 diharmonic:
604 The triangular wave will be approximated by adding two
605 sinusoidials. This solution might especially hurt on
606 systems with weak floating point unit.
607 benchmark (default):
608 This is not an algorithm. Use this option if the
609 appropriate algorithm should be automatically
610 chosen by the configure script by performing a
611 benchmark between the algorithms mentioned above.
612 This will NOT work for cross compilation!],
613 [ if test ! "(" "${enableval}" = "intmath" \
614 -o "${enableval}" = "intmathabs" \
615 -o "${enableval}" = "diharmonic" ")" ; then
616 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
617 else
618 config_signed_triang_algo="${enableval}"
619 fi
620 ],
621 [config_signed_triang_algo="benchmark"]
622 )
623
624 AC_ARG_ENABLE(unsigned-triang-algo,
625 [ --enable-unsigned-triang-algo
626 Unsigned triangular wave algorithm to be used (e.g. for LFOs).
627 Currently available options:
628 intmath:
629 Uses integer math without any branch will then be
630 converted to floating point value for each sample point.
631 This int->float conversion might hurt on some systems.
632 intmathabs:
633 Similar to intmath but uses abs() function.
634 Depending on compiler and platrofm this could
635 perform better than integer math as it avoids
636 an extra integer multiply instruction.
637
638 diharmonic:
639 The triangular wave will be approximated by adding two
640 sinusoidials. This solution might especially hurt on
641 systems with weak floating point unit.
642 benchmark (default):
643 This is not an algorithm. Use this option if the
644 appropriate algorithm should be automatically
645 chosen by the configure script by performing a
646 benchmark between the algorithms mentioned above.
647 This will NOT work for cross compilation!],
648 [ if test ! "(" "${enableval}" = "intmath" \
649 -o "${enableval}" = "intmathabs" \
650 -o "${enableval}" = "diharmonic" ")" ; then
651 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
652 else
653 config_unsigned_triang_algo="${enableval}"
654 fi
655 ],
656 [config_unsigned_triang_algo="benchmark"]
657 )
658
659 AC_ARG_ENABLE(process-muted-channels,
660 [ --enable-process-muted-channels
661 Enable processing of muted channels (default=no).
662 In that mode all MIDI events in the muted channels
663 will be processed. This will provide information
664 about the active voices in the muted channels and
665 will not discard notes, triggered in mute mode,
666 when the channel is unmuted. But also will reduce
667 the efficiency.],
668 [config_process_muted_channels="yes"],
669 [config_process_muted_channels="no"]
670 )
671 if test "$config_process_muted_channels" = "yes"; then
672 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
673 fi
674
675
676 ###########################################################################
677 # Automatic Benchmarks (to detect the best algorithms for the system)
678
679 AC_LANG_SAVE
680
681 if test "$config_signed_triang_algo" = "benchmark"; then
682 echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
683 AC_LANG_CPLUSPLUS
684 AC_TRY_RUN([
685 #define SIGNED 1
686 #define SILENT 1
687 #include "${srcdir}/benchmarks/triang.cpp"
688 ],
689 triang_signed=0,
690 triang_signed=$?,
691 triang_signed=0
692 )
693 if test "$triang_signed" = "2"; then
694 config_signed_triang_algo="intmath"
695 echo "integer math"
696 elif test "$triang_signed" = "3"; then
697 config_signed_triang_algo="diharmonic"
698 echo "di harmonics"
699 elif test "$triang_signed" = "5"; then
700 config_signed_triang_algo="intmathabs"
701 echo "integer math using abs()"
702 else
703 echo "Benchmark of signed triangular wave algorithms failed!"
704 echo "Maybe you are doing cross compilation? In that case you have to select"
705 echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
706 echo "Call './configure --help' for further information or read configure.in."
707 exit -1;
708 fi
709 fi
710 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
711
712 if test "$config_unsigned_triang_algo" = "benchmark"; then
713 echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
714 AC_LANG_CPLUSPLUS
715 AC_TRY_RUN([
716 #define SIGNED 0
717 #define SILENT 1
718 #include "${srcdir}/benchmarks/triang.cpp"
719 ],
720 triang_unsigned=0,
721 triang_unsigned=$?,
722 triang_unsigned=0
723 )
724 if test "$triang_unsigned" = "2"; then
725 config_unsigned_triang_algo="intmath"
726 echo "integer math"
727 elif test "$triang_unsigned" = "3"; then
728 config_unsigned_triang_algo="diharmonic"
729 echo "di harmonics"
730 elif test "$triang_unsigned" = "5"; then
731 config_unsigned_triang_algo="intmathabs"
732 echo "integer math using abs()"
733 else
734 echo "Benchmark of unsigned triangular wave algorithms failed!"
735 echo "Maybe you are doing cross compilation? In that case you have to select"
736 echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
737 echo "Call './configure --help' for further information or read configure.in."
738 exit -1;
739 fi
740 fi
741 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
742
743 AC_LANG_RESTORE
744
745
746 ###########################################################################
747 # Create Build Files
748
749 AM_CONFIG_HEADER(config.h)
750 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
751
752 AC_LANG_CPLUSPLUS
753 AC_PROG_CXX
754
755 # some gcc 4.0 versions need -msse for SSE register allocations
756 if test "$config_asm" = "yes"; then
757 if test "$def_arch_x86" = 1; then
758 CXXFLAGS="$CXXFLAGS -msse"
759 fi
760 fi
761
762 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
763 # this, the dlfcn.h check in am_prog_libtool may fail.
764 AC_CHECK_HEADER(stdlib.h)
765
766 AC_OUTPUT( \
767 Makefile \
768 man/Makefile \
769 man/linuxsampler.1 \
770 src/Makefile \
771 src/network/Makefile \
772 src/engines/Makefile \
773 src/engines/gig/Makefile \
774 src/engines/common/Makefile \
775 src/common/Makefile src/lib/Makefile \
776 src/lib/fileloader/Makefile \
777 src/lib/fileloader/libgig/Makefile \
778 src/testcases/Makefile \
779 src/drivers/Makefile \
780 src/drivers/audio/Makefile \
781 src/drivers/midi/Makefile \
782 linuxsampler.spec \
783 debian/Makefile \
784 Artwork/Makefile \
785 scripts/Makefile \
786 osx/Makefile \
787 osx/LinuxSampler.xcode/Makefile \
788 Documentation/Makefile \
789 Documentation/Engines/Makefile \
790 Documentation/Engines/gig/Makefile \
791 linuxsampler.pc \
792 Doxyfile \
793 )
794
795
796 ###########################################################################
797 # Output All Configuration Options
798
799 echo ""
800 echo "#####################################################################"
801 echo "# LinuxSampler Configuration #"
802 echo "#-------------------------------------------------------------------#"
803 echo "# Assembly Optimizations: ${config_asm}"
804 echo "# Development Mode: ${config_dev_mode}"
805 echo "# Debug Level: ${config_debug_level}"
806 echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
807 echo "# Preload Samples: ${config_preload_samples}"
808 echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
809 echo "# Maximum Events: ${config_max_events}"
810 echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
811 echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
812 echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
813 echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
814 echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
815 echo "# Stream Size: ${config_stream_size}"
816 echo "# Maximum Disk Streams: ${config_max_streams}"
817 echo "# Maximum Voices: ${config_max_voices}"
818 echo "# Default Subfragment Size: ${config_subfragment_size}"
819 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
820 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
821 echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
822 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
823 echo "# Force Filter Usage: ${config_force_filter}"
824 echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
825 echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
826 echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
827 echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
828 echo "# Override Filter Type: ${config_override_filter_type}"
829 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
830 echo "# Process Muted Channels: ${config_process_muted_channels}"
831 echo "#-------------------------------------------------------------------#"
832 echo "# Read './configure --help' or file 'configure.in' for details. #"
833 echo "#####################################################################"
834 echo ""
835 echo "Good. Now type 'make' to compile, followed by 'make install' as root."
836 echo ""

  ViewVC Help
Powered by ViewVC