/[svn]/linuxsampler/trunk/configure.in
ViewVC logotype

Annotation of /linuxsampler/trunk/configure.in

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1800 - (hide annotations) (download)
Sun Dec 7 01:26:46 2008 UTC (10 years, 8 months ago) by schoenebeck
File size: 52230 byte(s)
* maximum voices and disk streams can now be altered at runtime (added new
  LSCP commands "GET VOICES", "SET VOICES", "GET STREAMS", "SET STREAMS"
  and accordingly new LSCP events "GLOBAL_INFO:VOICES" and
  "GLOBAL_INFO:STREAMS")
* bumped version to 0.5.1.8cvs

1 schoenebeck 9 AC_INIT(configure.in)
2 schoenebeck 697
3     #------------------------------------------------------------------------------------
4     # LinuxSampler's / liblinuxsampler's "official" release version:
5    
6     LINUXSAMPLER_RELEASE_MAJOR=0
7 schoenebeck 1424 LINUXSAMPLER_RELEASE_MINOR=5
8 schoenebeck 1800 LINUXSAMPLER_RELEASE_BUILD=1.8cvs
9 schoenebeck 697
10     #------------------------------------------------------------------------------------
11     # The following is the libtool / shared library version. This doesn't have to
12     # do anything with the release version. It MUST conform to the following rules:
13     #
14     # 1. Start with version information of `0:0:0' for each libtool library.
15     # 2. Update the version information only immediately before a public release of
16     # your software. More frequent updates are unnecessary, and only guarantee
17     # that the current interface number gets larger faster.
18     # 3. If the library source code has changed at all since the last update, then
19     # increment revision (`c:r:a' becomes `c:r+1:a').
20     # 4. If any interfaces have been added, removed, or changed since the last update,
21     # increment current, and set revision to 0.
22     # 5. If any interfaces have been added since the last public release, then increment
23     # age.
24     # 6. If any interfaces have been removed since the last public release, then set age
25     # to 0.
26    
27 schoenebeck 1560 LIBLINUXSAMPLER_LT_CURRENT=2
28 schoenebeck 697 LIBLINUXSAMPLER_LT_REVISION=0
29 schoenebeck 1560 LIBLINUXSAMPLER_LT_AGE=1
30 schoenebeck 697 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31    
32 schoenebeck 947 #------------------------------------------------------------------------------------
33     # the LSCP specification version this LinuSampler release complies with:
34    
35     LSCP_RELEASE_MAJOR=1
36 schoenebeck 1686 LSCP_RELEASE_MINOR=4
37 schoenebeck 947
38     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40    
41 schoenebeck 1741 AC_PROG_CXX
42 persson 1777 AC_LIBTOOL_WIN32_DLL
43 schoenebeck 697 AM_PROG_LIBTOOL
44    
45     AC_SUBST(SHLIB_VERSION_ARG)
46     AC_SUBST(SHARED_VERSION_INFO)
47    
48 schoenebeck 12 AC_C_BIGENDIAN
49 schoenebeck 9 AC_CANONICAL_SYSTEM
50    
51 schoenebeck 80 AC_SUBST(target)
52     AC_SUBST(target_alias)
53     AC_SUBST(target_cpu)
54     AC_SUBST(target_os)
55     AC_SUBST(target_vendor)
56 schoenebeck 18
57 schoenebeck 1639 PKG_PROG_PKG_CONFIG
58 schoenebeck 275
59 schoenebeck 554 ###########################################################################
60     # General Checks
61 schoenebeck 275
62 schoenebeck 510 AC_MSG_CHECKING([whether x86 architecture])
63 schoenebeck 9 def_arch_x86=0
64     case $target_cpu in
65 persson 1794 "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
66 schoenebeck 9 echo "yes"
67     def_arch_x86=1;;
68     *)
69     echo "no";;
70     esac
71     AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
72    
73 schoenebeck 510 # determine the right gcc switch for CPU specific optimizations
74 schoenebeck 829 # (only if the user did not provide one)
75 schoenebeck 510 CXX_CPU_SWITCH=
76 schoenebeck 829 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
77 persson 1794 if test "$def_arch_x86" = 1 -a "$target_cpu" != "x86_64"; then
78 schoenebeck 829 CXX_CPU_SWITCH="-march=$target_cpu"
79 schoenebeck 909 elif test "$target_cpu" = "ppc"; then
80 schoenebeck 829 CXX_CPU_SWITCH="-arch=$target_cpu"
81     fi
82 schoenebeck 510 fi
83     AC_SUBST([CXX_CPU_SWITCH])
84    
85 senoner 1502 # check if we're on MS Windows
86     AC_CHECK_HEADERS(
87     mmsystem.h,
88     have_windows=1,
89     have_windows=0
90     )
91     AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
92    
93 schoenebeck 288 AC_MSG_CHECKING([whether UNIX98 compatible])
94     AC_LANG_SAVE
95     AC_LANG_C
96     AC_TRY_RUN([
97     #ifndef _GNU_SOURCE
98     #define _GNU_SOURCE 1
99     #endif
100     #include <features.h>
101     void main(void) {
102     #if _XOPEN_SOURCE >= 500
103     exit(0); /* UNIX98 compatible */
104     #else
105     exit(-1); /* not UNIX98 compatible */
106     #endif
107     }
108     ],
109     have_unix98="yes",
110     have_unix98="no",
111     have_unix98="no"
112     )
113     AC_LANG_RESTORE
114     AC_MSG_RESULT([$have_unix98])
115 senoner 1502 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
116 schoenebeck 288 if test "x$HAVE_UNIX98" = "x"; then
117     echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
118     echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
119     echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
120     echo "have a UNIX98 compatible system."
121     exit -1;
122     fi
123     fi
124    
125 wylder 822 # check for <features.h>
126     AC_CHECK_HEADERS(features.h)
127 wylder 821
128 schoenebeck 1454 # test for POSIX thread library
129     m4_ifdef([m4_include(m4/pthread.m4)],,
130     [sinclude([m4/pthread.m4])])
131     ACX_PTHREAD
132     LIBS="$PTHREAD_LIBS $LIBS"
133     CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
134     CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
135     CC="$PTHREAD_CC"
136 schoenebeck 852
137 schoenebeck 1454 # check for a bug in NPTL-enabled glibc
138     # (see Gentoo bug report #194076)
139     AC_ARG_ENABLE(nptl-bug-check,
140     [ --disable-nptl-bug-check
141     Disable check for a bug in certain NPTL-enabled
142     glibc versions that caused crashs.],
143     [config_check_nptl_bug="$enableval"],
144     [config_check_nptl_bug="yes"]
145     )
146     if test "$config_check_nptl_bug" = "yes"; then
147     m4_ifdef([m4_include(m4/nptl_bug.m4)],,
148     [sinclude([m4/nptl_bug.m4])])
149     ACX_NPTL_GLIBC_BUG([
150     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
151     echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
152     echo "probably crash due to this. Please report us the system you are"
153     echo "using and/or file a bug report to the bug tracking system of"
154     echo "your distribution."
155     echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
156     echo "well, you can try to circumvent this problem for now by setting"
157     echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
158     echo "should cause this test to pass."
159     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
160     AC_MSG_ERROR([possibly NPTL glibc bug detected])
161     ])
162     else
163     echo "NPTL glibc bug check disabled"
164     fi
165    
166 schoenebeck 1742 # FIXME: this is actually a dependency of libgig, not of LS directly, why
167     # isn't it hidden by libgig?
168     AC_CHECK_HEADERS(uuid/uuid.h)
169     AC_SEARCH_LIBS(uuid_generate, uuid)
170 schoenebeck 1454
171    
172 schoenebeck 1742
173 schoenebeck 852 ###########################################################################
174 schoenebeck 288 # Checks for available audio and MIDI systems / drivers
175     # (we throw an error if there's not at least one system for audio output and MIDI input available)
176 schoenebeck 852
177 schoenebeck 288 have_midi_input_driver="false"
178     have_audio_output_driver="false"
179    
180 schoenebeck 852 # ALSA
181     AC_ARG_ENABLE(alsa-driver,
182     [ --disable-alsa-driver
183     Disable support for the Advanced Linux Sound
184     Architecture (ALSA).],
185 schoenebeck 1360 [config_alsa_driver="$enableval"],
186 schoenebeck 852 [config_alsa_driver="yes"]
187 schoenebeck 18 )
188 schoenebeck 852 have_alsa=0
189     if test "$config_alsa_driver" = "yes"; then
190     AC_CHECK_HEADER(alsa/asoundlib.h,
191     AC_CHECK_LIB(asound, main,
192     have_alsa=1
193     ,
194     have_alsa=0
195     )
196     ,
197     have_alsa=0
198     )
199     if test "$have_alsa" = "1"; then
200     have_midi_input_driver="true"
201     have_audio_output_driver="true";
202     fi
203    
204     echo -n "checking Alsa version... "
205     AC_LANG_SAVE
206     AC_LANG_C
207     AC_TRY_RUN([
208     #include <alsa/asoundlib.h>
209     void main(void) {
210     /* ensure backward compatibility */
211     #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
212     #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
213     #endif
214     exit(SND_LIB_MAJOR);
215     }
216     ],
217     alsa_major=0,
218     alsa_major=$?,
219     alsa_major=0
220     )
221     AC_TRY_RUN([
222     #include <alsa/asoundlib.h>
223     void main(void) {
224     /* ensure backward compatibility */
225     #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
226     #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
227     #endif
228     exit(SND_LIB_MINOR);
229     }
230     ],
231     alsa_minor=0,
232     alsa_minor=$?,
233     alsa_minor=0
234     )
235     AC_TRY_RUN([
236     #include <alsa/asoundlib.h>
237     void main(void) {
238     /* ensure backward compatibility */
239     #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
240     #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
241     #endif
242     exit(SND_LIB_SUBMINOR);
243     }
244     ],
245     alsa_subminor=0,
246     alsa_subminor=$?,
247     alsa_subminor=0
248     )
249     AC_LANG_RESTORE
250     echo "$alsa_major.$alsa_minor.$alsa_subminor";
251     AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
252     AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
253     AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
254     else
255     echo "ALSA support disabled by configure script parameter"
256 schoenebeck 18 fi
257 schoenebeck 291 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
258 schoenebeck 288 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
259 schoenebeck 18
260 schoenebeck 852 # JACK
261     AC_ARG_ENABLE(jack-driver,
262     [ --disable-jack-driver
263     Disable support for the Jack Audio Connection Kit
264     (JACK).],
265 schoenebeck 1360 [config_jack_driver="$enableval"],
266 schoenebeck 852 [config_jack_driver="yes"]
267 schoenebeck 18 )
268 schoenebeck 852 have_jack=0
269     if test "$config_jack_driver" = "yes"; then
270     PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
271     if test $have_jack = "1"; then
272     AC_SUBST(JACK_LIBS)
273     AC_SUBST(JACK_CFLAGS)
274 persson 1748 linuxsampler_save_LIBS=$LIBS
275     LIBS="$JACK_LIBS $LIBS"
276     AC_CHECK_FUNCS(jack_client_name_size jack_client_open)
277     LIBS=$linuxsampler_save_LIBS
278 schoenebeck 852 have_audio_output_driver="true";
279     fi
280 schoenebeck 33 else
281 schoenebeck 852 echo "JACK support disabled by configure script parameter"
282 schoenebeck 33 fi
283 schoenebeck 852 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
284     AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
285 schoenebeck 31
286 persson 1651 # JACK MIDI
287     have_jack_midi=0
288     if test $have_jack = "1"; then
289 persson 1652 linuxsampler_save_CFLAGS=$CFLAGS
290     linuxsampler_save_LIBS=$LIBS
291     CFLAGS="$JACK_CFLAGS $CFLAGS"
292     LIBS="$JACK_LIBS $LIBS"
293     AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
294     if test $have_jack_midi = "1"; then
295     AC_CHECK_FUNCS(jack_midi_get_event_count)
296     AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
297     jack_midi_clear_buffer(0, 0);
298     ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
299     [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
300     have_midi_input_driver="true"
301     fi
302     CFLAGS=$linuxsampler_save_CFLAGS
303     LIBS=$linuxsampler_save_LIBS
304 persson 1651 fi
305     AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
306     AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
307     [Define to 1 if you have JACK with MIDI support installed.])
308    
309 schoenebeck 838 # ARTS
310 schoenebeck 852 AC_ARG_ENABLE(arts-driver,
311     [ --disable-arts-driver
312     Disable support for the Analogue Realtime System
313     (aRts).],
314 schoenebeck 1360 [config_arts_driver="$enableval"],
315 schoenebeck 852 [config_arts_driver="yes"]
316     )
317     have_arts=0
318     if test "$config_arts_driver" = "yes"; then
319     m4_ifdef([m4_include(m4/arts.m4)],,
320     [sinclude([m4/arts.m4])])
321     AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
322     if test "$have_arts" = "1"; then
323     have_audio_output_driver="true"
324     fi
325     else
326     echo "ARTS support disabled by configure script parameter"
327 schoenebeck 838 fi
328     AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
329     AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
330    
331 senoner 1502 # ASIO AUDIO (Win32)
332     AC_ARG_ENABLE(asiosdk-dir,
333     [ --enable-asiosdk-dir
334     Directory where the ASIO SDK is located, this automatically
335     enables the compilation of the ASIO audio output driver.],
336     [config_asiosdk_dir="${enableval}"],
337     [config_asiosdk_dir="."]
338     )
339     AC_SUBST(config_asiosdk_dir)
340    
341     AC_ARG_ENABLE(asio-driver,
342     [ --disable-asio-driver
343     Disable support for the Windows ASIO driver.],
344     [config_asio_driver="$enableval"],
345     [config_asio_driver="yes"]
346     )
347     have_asio=0
348     ASIOSDK_BASEDIR=
349     if test "$config_asio_driver" = "yes"; then
350     asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
351     echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
352     if test -e $asiosdk_headerfile ; then
353     echo yes
354     have_asio=1
355     ASIOSDK_BASEDIR="$config_asiosdk_dir"
356     else
357     echo no
358     have_asio=0
359     fi
360     if test "$have_asio" = "1"; then
361     have_audio_output_driver="true"
362     fi
363     else
364     echo "Windows ASIO support disabled by configure script parameter"
365     fi
366     AC_SUBST(ASIOSDK_BASEDIR)
367     AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
368     AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
369    
370 schoenebeck 609 # MidiShare (Linux, OS X, Windows)
371 schoenebeck 852 AC_ARG_ENABLE(midishare-driver,
372     [ --disable-midishare-driver
373     Disable support for the MidiShare system.],
374 schoenebeck 1360 [config_midishare_driver="$enableval"],
375 schoenebeck 852 [config_midishare_driver="yes"]
376 schoenebeck 609 )
377 schoenebeck 852 have_midishare=0
378     if test "$config_midishare_driver" = "yes"; then
379     AC_CHECK_HEADER(MidiShare.h,
380     AC_CHECK_LIB(MidiShare, MidiCountEvs,
381     have_midishare=1,
382     have_midishare=0
383     )
384     ,
385     have_midishare=0
386     )
387     if test "$have_midishare" = "1"; then
388     have_midi_input_driver="true"
389     fi
390     else
391     echo "MidiShare support disabled by configure script parameter"
392 schoenebeck 609 fi
393     AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
394     AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
395    
396     # CoreMIDI (OS X)
397 schoenebeck 852 AC_ARG_ENABLE(coremidi-driver,
398     [ --disable-coremidi-driver
399     Disable support for the Apple CoreMIDI system.],
400 schoenebeck 1360 [config_coremidi_driver="$enableval"],
401 schoenebeck 852 [config_coremidi_driver="yes"]
402 schoenebeck 609 )
403 schoenebeck 852 have_coremidi=0
404     if test "$config_coremidi_driver" = "yes"; then
405     AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
406     have_coremidi=1,
407     have_coremidi=0
408     )
409     if test "$have_coremidi" = "1"; then
410     have_midi_input_driver="true"
411     fi
412     else
413     echo "CoreMIDI support disabled by configure script parameter"
414 schoenebeck 609 fi
415     AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
416     AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
417    
418 senoner 1502 # MME MIDI (Win32)
419     AC_ARG_ENABLE(mmemidi-driver,
420     [ --disable-mmemidi-driver
421     Disable support for the Windows MME MIDI system.],
422     [config_mmemidi_driver="$enableval"],
423     [config_mmemidi_driver="yes"]
424     )
425     have_mmemidi=0
426     if test "$config_mmemidi_driver" = "yes"; then
427     AC_CHECK_HEADERS(mmsystem.h,
428     have_mmemidi=1,
429     have_mmemidi=0
430     )
431     if test "$have_mmemidi" = "1"; then
432     have_midi_input_driver="true"
433     fi
434     else
435     echo "MME MIDI support disabled by configure script parameter"
436     fi
437     AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
438     AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
439    
440 persson 1777
441     # DSSI
442     AC_CHECK_HEADERS(dssi.h,
443     have_dssi=1,
444     have_dssi=0)
445     AM_CONDITIONAL(HAVE_DSSI, test $have_dssi = "1")
446    
447     # LV2
448     PKG_CHECK_MODULES(LV2, lv2core, have_lv2=1, have_lv2=0)
449     if test $have_lv2 = "0"; then
450     AC_CHECK_HEADER(lv2.h, have_lv2=1, have_lv2=0)
451     fi
452     AM_CONDITIONAL(HAVE_LV2, test $have_lv2 = "1")
453    
454     # VST
455     AC_ARG_ENABLE(vstsdk-dir,
456     [ --enable-vstsdk-dir
457     Directory where the VST SDK is located.
458     This automatically enables the compilation
459     of the VST plugin.],
460     [VSTSDK_DIR="${enableval}"],
461     [VSTSDK_DIR=]
462     )
463     AC_SUBST(VSTSDK_DIR)
464     AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
465    
466    
467 schoenebeck 1364 # have we found at least one MIDI input and one audio output driver ?
468     if test "$have_midi_input_driver" = "false"; then
469     echo "No supported MIDI input system found!"
470     echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
471 persson 1652 echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
472 schoenebeck 1364 echo "If you think you have one of those available on your system, make sure you"
473     echo "also have the respective development (header) files installed."
474     exit -1;
475     fi
476     if test "$have_audio_output_driver" = "false"; then
477     echo "No supported audio output system found!"
478 persson 1652 echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
479 schoenebeck 1364 echo "driver at the moment!"
480     exit -1;
481     fi
482    
483    
484    
485     ###########################################################################
486     # Checks for various DLL libraries
487    
488 schoenebeck 504 # Check presence of libgig
489 schoenebeck 1560 libgig_version="3.2.1"
490 schoenebeck 504 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
491     if test "$HAVE_GIG" = "false"; then
492     echo "Required libgig version not found!"
493     echo "You need to have libgig version ${libgig_version} installed!"
494     exit -1;
495 schoenebeck 714 else
496     echo "yes, found libgig $libgig_version"
497 schoenebeck 504 fi
498     AC_SUBST(GIG_CFLAGS)
499     AC_SUBST(GIG_LIBS)
500    
501 schoenebeck 1364 # Instruments DB feature (requires SQLite 3.3)
502     AC_ARG_ENABLE(instruments-db,
503     [ --disable-instruments-db
504     Disable compilation of the sampler's instruments
505     database feature. You need to have SQLite 3.3
506     or younger installed for this feature.],
507     [config_instruments_db="$enableval"],
508     [config_instruments_db="yes"]
509     )
510     HAVE_SQLITE3=0;
511     if test "$config_instruments_db" = "yes"; then
512     # Check presence of sqlite3
513     sqlite_version="3.3"
514     PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
515     AC_SUBST(SQLITE3_LIBS)
516     AC_SUBST(SQLITE3_CFLAGS)
517     if test $HAVE_SQLITE3 = false; then
518     HAVE_SQLITE3=0
519     config_instruments_db="no"
520     echo "*** Required sqlite version not found!"
521     echo "*** You need to have sqlite version ${sqlite_version} or higher"
522     echo "*** for instruments database support to be enabled."
523     echo "*** Support for instruments DB will be disabled!"
524     else
525     HAVE_SQLITE3=1
526     fi
527 senkov 397 else
528 schoenebeck 1364 echo "Instruments DB feature disabled by configure script parameter"
529 senkov 397 fi
530     AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
531 schoenebeck 1364 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
532 schoenebeck 31
533 schoenebeck 288
534    
535 schoenebeck 554 ###########################################################################
536     # Handle Configuration Options
537    
538     # TODO: should we use AC_ARG_VAR(variable, description) instead?
539    
540 schoenebeck 617 AC_ARG_ENABLE(asm,
541 schoenebeck 1259 [ --disable-asm
542 schoenebeck 738 Enable hand-crafted assembly optimizations
543 schoenebeck 1259 (default=on). LinuxSampler provides CPU specific
544     assembly optimizations. This is currently limited
545     to just enter a fast (denormal) FPU mode on x86
546     platforms. There are currently no synthesis core
547     assembly optimizations anymore since LS 0.4.0],
548 schoenebeck 1360 [config_asm="$enableval"],
549 schoenebeck 1259 [config_asm="yes"]
550 schoenebeck 617 )
551     if test "$config_asm" = "yes"; then
552 schoenebeck 1259 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
553 schoenebeck 617 fi
554    
555 schoenebeck 554 AC_ARG_ENABLE(dev-mode,
556 schoenebeck 1424 [ --enable-dev-mode
557     Enable development mode (default=off). In that mode
558 schoenebeck 554 we do some extra sanity checks here and there.
559     This helps to spot possible problems, but reduces
560     efficiency a bit],
561 schoenebeck 1360 [config_dev_mode="$enableval"],
562 schoenebeck 1424 [config_dev_mode="no"]
563 schoenebeck 554 )
564     if test "$config_dev_mode" = "yes"; then
565     AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
566     fi
567    
568     AC_ARG_ENABLE(debug-level,
569     [ --enable-debug-level
570     Specify verbosity of console messages (default=1).
571     The higher the value, the higher will be verbosity.
572     A value of 0 means no console output at all.
573     There's not really an upper limit but the usual
574     level of all messages is currently somewhere less
575     than 10.],
576     [config_debug_level="${enableval}"],
577     [config_debug_level="1"]
578     )
579     AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
580    
581     AC_ARG_ENABLE(rt-exceptions,
582     [ --enable-rt-exceptions
583     Enable exceptions in the realtime thread
584     (default=no). If this is enabled, exceptions will
585     be thrown on critical errors in the realtime
586     context as well. Otherwise if disabled
587     segmentation faults will be forced by the
588     application on critical errors.],
589 schoenebeck 1360 [config_rt_exceptions="$enableval"],
590 schoenebeck 554 [config_rt_exceptions="no"]
591     )
592     if test "$config_rt_exceptions" = "yes"; then
593     AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
594     fi
595    
596 nagata 1649 AC_ARG_ENABLE(pthread-testcancel,
597     [ --enable-pthread-testcancel
598 schoenebeck 1742 Enable pthread_testcancel() calls and avoid asynchronous
599 nagata 1649 cancel of pthreads (default=no).],
600     [config_pthread_testcancel="$enableval"],
601     [config_pthread_testcancel="no"]
602     )
603     if test "$config_pthread_testcancel" = "yes"; then
604     AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
605     fi
606    
607 schoenebeck 554 AC_ARG_ENABLE(preload-samples,
608     [ --enable-preload-samples
609     Due to seeking and latency issues with hard drives
610     we have to cache a small part of samples' head in
611     RAM (default=32768). The higher this value the
612     more memory will be occupied for each sample, but
613     the safer this will be in regards of possible
614     droputs. A 'good' value depends on the running
615     system and usage dependant factors.],
616     [config_preload_samples="${enableval}"],
617     [config_preload_samples="32768"]
618     )
619     AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
620    
621     AC_ARG_ENABLE(max-pitch,
622     [ --enable-max-pitch
623     Specify the maximum allowed pitch value in octaves
624     (default=4). To lower memory usage you might want
625     set a smaller value.],
626     [config_max_pitch="${enableval}"],
627     [config_max_pitch="4"]
628     )
629     AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
630    
631     AC_ARG_ENABLE(max-events,
632     [ --enable-max-events
633     Specify the maximum allowed amount of events to be
634     processed per fragment (default=1024).],
635     [config_max_events="${enableval}"],
636     [config_max_events="1024"]
637     )
638     AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
639    
640     AC_ARG_ENABLE(eg-bottom,
641     [ --enable-eg-bottom
642     Bottom limit of envelope generators
643     (default=0.001). Certain kinds of curve types like
644     exponential curves converge against 0 but never
645     reach 0. So we have to define a certain low value
646     after which we should consider all smaller values
647     to be 'almost zero'. The smaller this value, the
648     longer will voices survive in EG's release stage
649     and thus waste voices. If this value is too high
650     will cause click sounds though.],
651     [config_eg_bottom="${enableval}"],
652     [config_eg_bottom="0.001"]
653     )
654     AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
655    
656     AC_ARG_ENABLE(eg-min-release-time,
657     [ --enable-eg-min-release-time
658     Specify the lowest allowed release time in seconds
659     (default=0.0025). This value will also be used to
660     ramp down voices on voice stealing. This value
661     should always be less than the period time of the
662     used audio driver, as in case of voice stealing
663     the killed voice needs to be completely ramped
664     down in the same fragment.],
665     [config_eg_min_release_time="${enableval}"],
666     [config_eg_min_release_time="0.0025"]
667     )
668     AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
669    
670     AC_ARG_ENABLE(refill-streams,
671     [ --enable-refill-streams
672     Number of streams that should be refilled in each
673     disk thread cycle (default=4).],
674     [config_refill_streams="${enableval}"],
675     [config_refill_streams="4"]
676     )
677     AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
678    
679     AC_ARG_ENABLE(stream-min-refill,
680     [ --enable-stream-min-refill
681     Minimum refill size for disk streams (default=1024).
682     The disk thread will go to sleep for a while if no
683     stream had to be refilled more than this value in
684     a disk thread cycle.],
685     [config_stream_min_refill="${enableval}"],
686     [config_stream_min_refill="1024"]
687     )
688     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
689    
690     AC_ARG_ENABLE(stream-max-refill,
691     [ --enable-stream-max-refill
692     Maximum refill size for disk streams
693     (default=65536). The disk thread will refill
694     each stream only by a size of this value per
695     disk thread cycle.],
696     [config_stream_max_refill="${enableval}"],
697     [config_stream_max_refill="65536"]
698     )
699     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
700    
701     AC_ARG_ENABLE(stream-size,
702     [ --enable-stream-size
703     Size of each stream's ring buffer in sample points
704     (default=262144).],
705     [config_stream_size="${enableval}"],
706     [config_stream_size="262144"]
707     )
708     AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
709    
710     AC_ARG_ENABLE(max-streams,
711     [ --enable-max-streams
712 schoenebeck 1800 Initial maximum amount of disk streams
713     (default=90). This value can be changed at
714     runtime. It should always be higher than the
715     maximum amount of voices.],
716 schoenebeck 554 [config_max_streams="${enableval}"],
717     [config_max_streams="90"]
718     )
719 schoenebeck 1800 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
720 schoenebeck 554
721     AC_ARG_ENABLE(max-voices,
722     [ --enable-max-voices
723 schoenebeck 1800 Initial maximum amount of voices (default=64).
724     This value can be changed at runtime. It should
725     always be lower than the maximum amount of disk
726     streams.],
727 schoenebeck 554 [config_max_voices="${enableval}"],
728     [config_max_voices="64"]
729     )
730 schoenebeck 1800 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
731 schoenebeck 554
732 schoenebeck 738 AC_ARG_ENABLE(subfragment-size,
733     [ --enable-subfragment-size
734     Every audio fragment will be splitted into
735     subfragments. Where each subfragment renders
736     audio with constant synthesis parameters. This is
737     done for efficiency reasons. This parameter
738     defines the default size of a subfragment in
739     sample points. A large value means less CPU time
740     whereas a low value means better audio quality
741     (default=32).],
742     [config_subfragment_size="${enableval}"],
743     [config_subfragment_size="32"]
744     )
745     AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
746    
747 schoenebeck 1005 AC_ARG_ENABLE(global-attenuation-default,
748     [ --enable-global-attenuation-default
749 schoenebeck 781 To prevent clipping all samples will be lowered
750 schoenebeck 1005 in amplitude by this given default factor (can
751     be overridden at runtime).
752 schoenebeck 781 (default=0.35)],
753 schoenebeck 1005 [config_global_attenuation_default="${enableval}"],
754     [config_global_attenuation_default="0.35"]
755 schoenebeck 781 )
756 schoenebeck 1005 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
757 schoenebeck 781
758 schoenebeck 554 AC_ARG_ENABLE(voice-steal-algo,
759     [ --enable-voice-steal-algo
760     Voice stealing algorithm to be used. Currently
761     available options:
762     none:
763     Disable voice stealing completely.
764 schoenebeck 563 oldestvoiceonkey (default):
765 schoenebeck 554 Try to kill a voice on the same key first,
766     if no success, proceed with the oldest key.
767 schoenebeck 563 oldestkey:
768 schoenebeck 554 Try to kill a voice from the oldest active
769     key.],
770     [ if test ! "(" "${enableval}" = "none" \
771     -o "${enableval}" = "oldestvoiceonkey" \
772     -o "${enableval}" = "oldestkey" ")" ; then
773     AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
774     else
775     config_voice_steal_algo="${enableval}"
776 schoenebeck 579 fi
777 schoenebeck 554 ],
778 schoenebeck 563 [config_voice_steal_algo="oldestvoiceonkey"]
779 schoenebeck 554 )
780     AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
781    
782     AC_ARG_ENABLE(sysex-buffer-size,
783     [ --enable-sysex-buffer-size
784     System Exclusive Message buffer size in kB
785     (default=2048).],
786     [config_sysex_buffer_size="${enableval}"],
787     [config_sysex_buffer_size="2048"]
788     )
789     AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
790    
791     AC_ARG_ENABLE(force-filter,
792     [ --enable-force-filter
793     If enabled will force filter to be used even if
794     no usage was define in instrument patch files.
795     (default=no).],
796 schoenebeck 1360 [config_force_filter="$enableval"],
797 schoenebeck 554 [config_force_filter="no"]
798     )
799     if test "$config_force_filter" = "yes"; then
800     AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
801     fi
802    
803     AC_ARG_ENABLE(filter-cutoff-min,
804     [ --enable-filter-cutoff-min
805     Minimum filter cutoff frequency in Hz
806     (default=100.0).],
807     [config_filter_cutoff_min="${enableval}"],
808     [config_filter_cutoff_min="100.0"]
809     )
810     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
811    
812     AC_ARG_ENABLE(filter-cutoff-max,
813     [ --enable-filter-cutoff-max
814     Maximum filter cutoff frequency in Hz
815     (default=10000.0).],
816     [config_filter_cutoff_max="${enableval}"],
817     [config_filter_cutoff_max="10000.0"]
818     )
819     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
820    
821     AC_ARG_ENABLE(override-cutoff-ctrl,
822     [ --enable-override-cutoff-ctrl
823     Override filter cutoff MIDI controller (default=no).
824     Note: you have to define the MIDI controller number
825     here, it's not a boolean parameter type! If this
826     option is used, controller number given by
827     instrument patch will be ignored and instead this
828     supplied value will be used.],
829     [config_override_cutoff_ctrl="${enableval}"],
830     [config_override_cutoff_ctrl="no"]
831     )
832     if test ! "$config_override_cutoff_ctrl" = "no"; then
833     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
834     fi
835    
836     AC_ARG_ENABLE(override-resonance-ctrl,
837     [ --enable-override-resonance-ctrl
838     Override filter resonance MIDI controller
839     (default=no). Note: you have to define the MIDI
840     controller number here, it's not a boolean
841     parameter type! If this option is used, controller
842     number given by instrument patch will be ignored
843     and instead this supplied value will be used.],
844     [config_override_resonance_ctrl="${enableval}"],
845     [config_override_resonance_ctrl="no"]
846     )
847     if test ! "$config_override_resonance_ctrl" = "no"; then
848     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
849     fi
850    
851     AC_ARG_ENABLE(override-filter-type,
852     [ --enable-override-filter-type
853     Override filter type (default=no). Options:
854     hp: for highpass
855     bp: for bandpass
856     br: for bandreject
857     lp: for lowpass
858     lpt: for lowpass turbo],
859     [ if test "${enableval}" = "hp" ; then
860     config_override_filter_type="::gig::vcf_type_highpass"
861     elif test "${enableval}" = "bp" ; then
862     config_override_filter_type="::gig::vcf_type_bandpass"
863     elif test "${enableval}" = "br" ; then
864     config_override_filter_type="::gig::vcf_type_bandreject"
865     elif test "${enableval}" = "lp" ; then
866     config_override_filter_type="::gig::vcf_type_lowpass"
867     elif test "${enableval}" = "lpt" ; then
868     config_override_filter_type="::gig::vcf_type_lowpassturbo"
869     elif test ! "${enableval}" = "no"; then
870     AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
871 schoenebeck 579 fi
872 schoenebeck 554 ],
873     [config_override_filter_type="no"]
874     )
875     if test ! "$config_override_filter_type" = "no"; then
876     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
877     fi
878    
879 schoenebeck 563 AC_ARG_ENABLE(gs-checksum,
880     [ --enable-gs-checksum
881     Enable Roland General Synth SysEx checksum check
882     (default=no). If this is enabled, all GS SysEx
883     messages which do not provide a correct checksum
884     will be ignored. This is disabled by default as
885     not all devices honor GS checksums.],
886 schoenebeck 1360 [config_assert_gs_sysex_checksum="$enableval"],
887 schoenebeck 563 [config_assert_gs_sysex_checksum="no"]
888     )
889     if test "config_assert_gs_sysex_checksum" = "yes"; then
890     AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
891     fi
892    
893 schoenebeck 829 AC_ARG_ENABLE(portamento-time-min,
894     [ --enable-portamento-time-min
895     Minimum Portamento time in seconds
896     (default=0.1).],
897     [config_portamento_time_min="${enableval}"],
898     [config_portamento_time_min="0.1"]
899     )
900     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
901    
902     AC_ARG_ENABLE(portamento-time-max,
903     [ --enable-portamento-time-max
904     Maximum Portamento time in seconds
905     (default=32).],
906     [config_portamento_time_max="${enableval}"],
907     [config_portamento_time_max="32"]
908     )
909     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
910    
911     AC_ARG_ENABLE(portamento-time-default,
912     [ --enable-portamento-time-default
913     Default Portamento time in seconds
914     (default=1).],
915     [config_portamento_time_default="${enableval}"],
916     [config_portamento_time_default="1"]
917     )
918     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
919    
920 schoenebeck 714 AC_ARG_ENABLE(signed-triang-algo,
921     [ --enable-signed-triang-algo
922     Signed triangular wave algorithm to be used (e.g. for LFOs).
923     Currently available options:
924     intmath:
925     Uses integer math without any branch will then be
926     converted to floating point value for each sample point.
927     This int->float conversion might hurt on some systems.
928 senkov 720 intmathabs:
929     Similar to intmath but uses abs() function.
930     Depending on compiler and platrofm this could
931     perform better than integer math as it avoids
932 schoenebeck 1360 an extra integer multiply instruction.
933 schoenebeck 714 diharmonic:
934     The triangular wave will be approximated by adding two
935     sinusoidials. This solution might especially hurt on
936     systems with weak floating point unit.
937     benchmark (default):
938     This is not an algorithm. Use this option if the
939     appropriate algorithm should be automatically
940     chosen by the configure script by performing a
941     benchmark between the algorithms mentioned above.
942     This will NOT work for cross compilation!],
943     [ if test ! "(" "${enableval}" = "intmath" \
944 senkov 720 -o "${enableval}" = "intmathabs" \
945 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
946     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
947     else
948     config_signed_triang_algo="${enableval}"
949     fi
950     ],
951     [config_signed_triang_algo="benchmark"]
952     )
953 schoenebeck 563
954 schoenebeck 714 AC_ARG_ENABLE(unsigned-triang-algo,
955     [ --enable-unsigned-triang-algo
956     Unsigned triangular wave algorithm to be used (e.g. for LFOs).
957     Currently available options:
958     intmath:
959     Uses integer math without any branch will then be
960     converted to floating point value for each sample point.
961     This int->float conversion might hurt on some systems.
962 senkov 720 intmathabs:
963     Similar to intmath but uses abs() function.
964     Depending on compiler and platrofm this could
965     perform better than integer math as it avoids
966 schoenebeck 1360 an extra integer multiply instruction.
967 schoenebeck 714 diharmonic:
968     The triangular wave will be approximated by adding two
969     sinusoidials. This solution might especially hurt on
970     systems with weak floating point unit.
971     benchmark (default):
972     This is not an algorithm. Use this option if the
973     appropriate algorithm should be automatically
974     chosen by the configure script by performing a
975     benchmark between the algorithms mentioned above.
976     This will NOT work for cross compilation!],
977     [ if test ! "(" "${enableval}" = "intmath" \
978 senkov 720 -o "${enableval}" = "intmathabs" \
979 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
980     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
981     else
982     config_unsigned_triang_algo="${enableval}"
983     fi
984     ],
985     [config_unsigned_triang_algo="benchmark"]
986     )
987    
988 iliev 716 AC_ARG_ENABLE(process-muted-channels,
989     [ --enable-process-muted-channels
990     Enable processing of muted channels (default=no).
991     In that mode all MIDI events in the muted channels
992     will be processed. This will provide information
993     about the active voices in the muted channels and
994     will not discard notes, triggered in mute mode,
995     when the channel is unmuted. But also will reduce
996     the efficiency.],
997 schoenebeck 1360 [config_process_muted_channels="$enableval"],
998 iliev 716 [config_process_muted_channels="no"]
999     )
1000     if test "$config_process_muted_channels" = "yes"; then
1001     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
1002     fi
1003 schoenebeck 714
1004 schoenebeck 849 AC_ARG_ENABLE(process-all-notes-off,
1005     [ --disable-process-all-notes-off
1006     Disable interpretation of All-Notes-Off MIDI
1007     messages (default=on). By default LS will release
1008     all voices whenever it receives an All-Notes-Off
1009     MIDI message. You can disable this behavior, so
1010     that LS simply ignores such messages.],
1011 schoenebeck 1360 [config_process_all_notes_off="$enableval"],
1012 schoenebeck 849 [config_process_all_notes_off="yes"]
1013     )
1014     if test "$config_process_all_notes_off" = "yes"; then
1015     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
1016     fi
1017    
1018 persson 830 AC_ARG_ENABLE(interpolate-volume,
1019     [ --disable-interpolate-volume
1020     Disable interpolation of volume modulation
1021     (default=on). With this enabled, the volume changes
1022     generated by for example the envelope generator
1023     will be smoother, minimizing the risk for audio
1024     clicks. Disable it to reduce CPU usage.],
1025 schoenebeck 1360 [config_interpolate_volume="$enableval"],
1026 persson 830 [config_interpolate_volume="yes"]
1027     )
1028     if test "$config_interpolate_volume" = "yes"; then
1029     AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
1030     fi
1031 iliev 716
1032 schoenebeck 1762 AC_ARG_ENABLE(master-volume-sysex-by-port,
1033     [ --enable-master-volume-sysex-by-port
1034     Whether global volume sysex message should be
1035     applied globally to the whole sampler or only to
1036     the sampler channels connected to the same MIDI
1037     input port on which the sysex message arrived on.
1038     By default global volume sysex messages apply
1039     globally to the whole sampler, since many MIDI
1040     devices behave that way.],
1041     [config_master_volume_sysex_by_port="$enableval"],
1042     [config_master_volume_sysex_by_port="no"]
1043     )
1044     if test "$config_master_volume_sysex_by_port" = "yes"; then
1045     AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
1046     fi
1047    
1048 schoenebeck 1212 AC_ARG_ENABLE(plugin-dir,
1049     [ --enable-plugin-dir
1050     Directory where the sampler shall look for potential plugins,
1051     that is 3rd party shared libraries that should be loaded by
1052     the sampler on startup. By default the sampler will search
1053     for plugins in the subdirectory "plugins" below its own
1054     library directory.
1055     (i.e. /usr/local/lib/linuxsampler/plugins)],
1056     [config_plugin_dir="${enableval}"],
1057     [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1058     )
1059     AC_SUBST(config_plugin_dir)
1060 persson 830
1061 schoenebeck 1364 AC_ARG_ENABLE(default-instruments-db-location,
1062     [ --enable-default-instruments-db-location
1063     Only when instruments DB feature is enabled: file name
1064     which shall be taken as default location of the
1065     instruments DB file. This location can still be
1066     overridden at runtime with a command line switch.
1067     (default: /var/lib/linuxsampler/instruments.db)],
1068     [config_default_instruments_db_file="${enableval}"],
1069     [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1070     )
1071     AC_DEFINE_UNQUOTED(
1072     CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1073     "$config_default_instruments_db_file",
1074     [Only when instruments DB feature is enabled: default location of the DB file.]
1075     )
1076 schoenebeck 1432 AC_SUBST(config_default_instruments_db_file)
1077 schoenebeck 1212
1078 schoenebeck 1364
1079 schoenebeck 554 ###########################################################################
1080 schoenebeck 714 # Automatic Benchmarks (to detect the best algorithms for the system)
1081    
1082     AC_LANG_SAVE
1083    
1084     if test "$config_signed_triang_algo" = "benchmark"; then
1085     echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1086     AC_LANG_CPLUSPLUS
1087     AC_TRY_RUN([
1088     #define SIGNED 1
1089     #define SILENT 1
1090 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1091 schoenebeck 714 ],
1092     triang_signed=0,
1093     triang_signed=$?,
1094     triang_signed=0
1095     )
1096     if test "$triang_signed" = "2"; then
1097     config_signed_triang_algo="intmath"
1098     echo "integer math"
1099     elif test "$triang_signed" = "3"; then
1100     config_signed_triang_algo="diharmonic"
1101     echo "di harmonics"
1102 senkov 720 elif test "$triang_signed" = "5"; then
1103     config_signed_triang_algo="intmathabs"
1104     echo "integer math using abs()"
1105 schoenebeck 714 else
1106     echo "Benchmark of signed triangular wave algorithms failed!"
1107     echo "Maybe you are doing cross compilation? In that case you have to select"
1108     echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1109     echo "Call './configure --help' for further information or read configure.in."
1110     exit -1;
1111     fi
1112 schoenebeck 1165 else
1113     case "$config_signed_triang_algo" in
1114     intmath)
1115     triang_signed=2 ;;
1116     diharmonic)
1117     triang_signed=3 ;;
1118     intmathabs)
1119     triang_signed=5 ;;
1120     esac
1121 schoenebeck 714 fi
1122 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1123 schoenebeck 714
1124     if test "$config_unsigned_triang_algo" = "benchmark"; then
1125     echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1126     AC_LANG_CPLUSPLUS
1127     AC_TRY_RUN([
1128     #define SIGNED 0
1129     #define SILENT 1
1130 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1131 schoenebeck 714 ],
1132     triang_unsigned=0,
1133     triang_unsigned=$?,
1134     triang_unsigned=0
1135     )
1136     if test "$triang_unsigned" = "2"; then
1137     config_unsigned_triang_algo="intmath"
1138     echo "integer math"
1139     elif test "$triang_unsigned" = "3"; then
1140     config_unsigned_triang_algo="diharmonic"
1141     echo "di harmonics"
1142 senkov 720 elif test "$triang_unsigned" = "5"; then
1143 schoenebeck 726 config_unsigned_triang_algo="intmathabs"
1144 senkov 720 echo "integer math using abs()"
1145 schoenebeck 714 else
1146     echo "Benchmark of unsigned triangular wave algorithms failed!"
1147     echo "Maybe you are doing cross compilation? In that case you have to select"
1148     echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1149     echo "Call './configure --help' for further information or read configure.in."
1150     exit -1;
1151     fi
1152 schoenebeck 1165 else
1153     case "$config_unsigned_triang_algo" in
1154     intmath)
1155     triang_unsigned=2 ;;
1156     diharmonic)
1157     triang_unsigned=3 ;;
1158     intmathabs)
1159     triang_unsigned=5 ;;
1160     esac
1161 schoenebeck 714 fi
1162 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1163 schoenebeck 714
1164     AC_LANG_RESTORE
1165    
1166    
1167     ###########################################################################
1168 schoenebeck 554 # Create Build Files
1169    
1170 schoenebeck 9 AM_CONFIG_HEADER(config.h)
1171 schoenebeck 697 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1172 schoenebeck 9
1173     AC_LANG_CPLUSPLUS
1174 persson 497
1175 persson 685 # some gcc 4.0 versions need -msse for SSE register allocations
1176     if test "$config_asm" = "yes"; then
1177     if test "$def_arch_x86" = 1; then
1178     CXXFLAGS="$CXXFLAGS -msse"
1179     fi
1180     fi
1181    
1182 persson 497 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1183     # this, the dlfcn.h check in am_prog_libtool may fail.
1184     AC_CHECK_HEADER(stdlib.h)
1185    
1186 schoenebeck 654 AC_OUTPUT( \
1187     Makefile \
1188     man/Makefile \
1189     man/linuxsampler.1 \
1190     src/Makefile \
1191 iliev 1161 src/db/Makefile \
1192 schoenebeck 654 src/network/Makefile \
1193     src/engines/Makefile \
1194     src/engines/gig/Makefile \
1195     src/engines/common/Makefile \
1196 schoenebeck 1722 src/effects/Makefile \
1197 schoenebeck 1321 src/common/Makefile \
1198 schoenebeck 654 src/testcases/Makefile \
1199     src/drivers/Makefile \
1200     src/drivers/audio/Makefile \
1201     src/drivers/midi/Makefile \
1202 schoenebeck 1375 src/plugins/Makefile \
1203 persson 1777 src/hostplugins/Makefile \
1204     src/hostplugins/dssi/Makefile \
1205     src/hostplugins/lv2/Makefile \
1206     src/hostplugins/vst/Makefile \
1207 schoenebeck 654 linuxsampler.spec \
1208     debian/Makefile \
1209     Artwork/Makefile \
1210     scripts/Makefile \
1211     osx/Makefile \
1212 schoenebeck 1175 osx/linuxsampler.xcodeproj/Makefile \
1213 schoenebeck 654 Documentation/Makefile \
1214     Documentation/Engines/Makefile \
1215     Documentation/Engines/gig/Makefile \
1216 schoenebeck 697 linuxsampler.pc \
1217     Doxyfile \
1218 schoenebeck 654 )
1219 schoenebeck 554
1220 schoenebeck 1212 # resolve all nested variables in '${config_plugin_dir}'
1221     # (merely for providing a human readable summary below)
1222     while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1223     config_plugin_dir=`eval echo ${config_plugin_dir}`
1224     done
1225 schoenebeck 554
1226 schoenebeck 1212
1227 schoenebeck 554 ###########################################################################
1228     # Output All Configuration Options
1229    
1230     echo ""
1231     echo "#####################################################################"
1232     echo "# LinuxSampler Configuration #"
1233     echo "#-------------------------------------------------------------------#"
1234 schoenebeck 617 echo "# Assembly Optimizations: ${config_asm}"
1235 schoenebeck 554 echo "# Development Mode: ${config_dev_mode}"
1236     echo "# Debug Level: ${config_debug_level}"
1237     echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1238     echo "# Preload Samples: ${config_preload_samples}"
1239     echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1240     echo "# Maximum Events: ${config_max_events}"
1241     echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1242     echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1243     echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1244     echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1245     echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1246     echo "# Stream Size: ${config_stream_size}"
1247 schoenebeck 1800 echo "# Default Maximum Disk Streams: ${config_max_streams}"
1248     echo "# Default Maximum Voices: ${config_max_voices}"
1249 schoenebeck 738 echo "# Default Subfragment Size: ${config_subfragment_size}"
1250 schoenebeck 1005 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1251 schoenebeck 563 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1252 schoenebeck 714 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1253     echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1254 schoenebeck 554 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1255 schoenebeck 829 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1256     echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1257     echo "# Default Portamento Time: ${config_portamento_time_default} s"
1258 schoenebeck 554 echo "# Force Filter Usage: ${config_force_filter}"
1259     echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1260     echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1261     echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1262     echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1263     echo "# Override Filter Type: ${config_override_filter_type}"
1264 schoenebeck 563 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1265 iliev 716 echo "# Process Muted Channels: ${config_process_muted_channels}"
1266 schoenebeck 849 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1267 schoenebeck 1762 echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
1268 persson 830 echo "# Interpolate Volume: ${config_interpolate_volume}"
1269 schoenebeck 1364 echo "# Instruments database support: ${config_instruments_db}"
1270     if test "$config_instruments_db" = "yes"; then
1271     echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1272     fi
1273 schoenebeck 1212 echo "# Plugin Path: ${config_plugin_dir}"
1274 schoenebeck 554 echo "#-------------------------------------------------------------------#"
1275     echo "# Read './configure --help' or file 'configure.in' for details. #"
1276     echo "#####################################################################"
1277     echo ""
1278     echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1279     echo ""

  ViewVC Help
Powered by ViewVC