/[svn]/linuxsampler/trunk/configure.in
ViewVC logotype

Annotation of /linuxsampler/trunk/configure.in

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1855 - (hide annotations) (download)
Mon Mar 2 15:33:38 2009 UTC (15 years ago) by iliev
File size: 53158 byte(s)
* fixed endless loop in Engine::SuspendAll() (bug #120)
* AU plugin, work in progress: minor fixes in the build files

1 schoenebeck 9 AC_INIT(configure.in)
2 schoenebeck 697
3     #------------------------------------------------------------------------------------
4     # LinuxSampler's / liblinuxsampler's "official" release version:
5    
6     LINUXSAMPLER_RELEASE_MAJOR=0
7 schoenebeck 1424 LINUXSAMPLER_RELEASE_MINOR=5
8 schoenebeck 1852 LINUXSAMPLER_RELEASE_BUILD=1.10cvs
9 schoenebeck 697
10     #------------------------------------------------------------------------------------
11     # The following is the libtool / shared library version. This doesn't have to
12     # do anything with the release version. It MUST conform to the following rules:
13     #
14     # 1. Start with version information of `0:0:0' for each libtool library.
15     # 2. Update the version information only immediately before a public release of
16     # your software. More frequent updates are unnecessary, and only guarantee
17     # that the current interface number gets larger faster.
18     # 3. If the library source code has changed at all since the last update, then
19     # increment revision (`c:r:a' becomes `c:r+1:a').
20     # 4. If any interfaces have been added, removed, or changed since the last update,
21     # increment current, and set revision to 0.
22     # 5. If any interfaces have been added since the last public release, then increment
23     # age.
24     # 6. If any interfaces have been removed since the last public release, then set age
25     # to 0.
26    
27 schoenebeck 1560 LIBLINUXSAMPLER_LT_CURRENT=2
28 schoenebeck 697 LIBLINUXSAMPLER_LT_REVISION=0
29 schoenebeck 1560 LIBLINUXSAMPLER_LT_AGE=1
30 schoenebeck 697 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31    
32 schoenebeck 947 #------------------------------------------------------------------------------------
33     # the LSCP specification version this LinuSampler release complies with:
34    
35     LSCP_RELEASE_MAJOR=1
36 schoenebeck 1686 LSCP_RELEASE_MINOR=4
37 schoenebeck 947
38     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40    
41 schoenebeck 1741 AC_PROG_CXX
42 persson 1777 AC_LIBTOOL_WIN32_DLL
43 schoenebeck 697 AM_PROG_LIBTOOL
44    
45     AC_SUBST(SHLIB_VERSION_ARG)
46     AC_SUBST(SHARED_VERSION_INFO)
47    
48 schoenebeck 12 AC_C_BIGENDIAN
49 schoenebeck 9 AC_CANONICAL_SYSTEM
50    
51 schoenebeck 80 AC_SUBST(target)
52     AC_SUBST(target_alias)
53     AC_SUBST(target_cpu)
54     AC_SUBST(target_os)
55     AC_SUBST(target_vendor)
56 schoenebeck 18
57 schoenebeck 1639 PKG_PROG_PKG_CONFIG
58 schoenebeck 275
59 schoenebeck 554 ###########################################################################
60     # General Checks
61 schoenebeck 275
62 schoenebeck 510 AC_MSG_CHECKING([whether x86 architecture])
63 schoenebeck 9 def_arch_x86=0
64     case $target_cpu in
65 persson 1794 "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
66 schoenebeck 9 echo "yes"
67     def_arch_x86=1;;
68     *)
69     echo "no";;
70     esac
71     AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
72    
73 schoenebeck 510 # determine the right gcc switch for CPU specific optimizations
74 schoenebeck 829 # (only if the user did not provide one)
75 schoenebeck 510 CXX_CPU_SWITCH=
76 schoenebeck 829 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
77 persson 1794 if test "$def_arch_x86" = 1 -a "$target_cpu" != "x86_64"; then
78 schoenebeck 829 CXX_CPU_SWITCH="-march=$target_cpu"
79 schoenebeck 909 elif test "$target_cpu" = "ppc"; then
80 schoenebeck 829 CXX_CPU_SWITCH="-arch=$target_cpu"
81     fi
82 schoenebeck 510 fi
83     AC_SUBST([CXX_CPU_SWITCH])
84    
85 senoner 1502 # check if we're on MS Windows
86     AC_CHECK_HEADERS(
87     mmsystem.h,
88     have_windows=1,
89     have_windows=0
90     )
91     AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
92    
93 schoenebeck 288 AC_MSG_CHECKING([whether UNIX98 compatible])
94     AC_LANG_SAVE
95     AC_LANG_C
96     AC_TRY_RUN([
97     #ifndef _GNU_SOURCE
98     #define _GNU_SOURCE 1
99     #endif
100     #include <features.h>
101     void main(void) {
102     #if _XOPEN_SOURCE >= 500
103     exit(0); /* UNIX98 compatible */
104     #else
105     exit(-1); /* not UNIX98 compatible */
106     #endif
107     }
108     ],
109     have_unix98="yes",
110     have_unix98="no",
111     have_unix98="no"
112     )
113     AC_LANG_RESTORE
114     AC_MSG_RESULT([$have_unix98])
115 senoner 1502 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
116 schoenebeck 288 if test "x$HAVE_UNIX98" = "x"; then
117     echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
118     echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
119     echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
120     echo "have a UNIX98 compatible system."
121     exit -1;
122     fi
123     fi
124    
125 wylder 822 # check for <features.h>
126     AC_CHECK_HEADERS(features.h)
127 wylder 821
128 schoenebeck 1454 # test for POSIX thread library
129     m4_ifdef([m4_include(m4/pthread.m4)],,
130     [sinclude([m4/pthread.m4])])
131     ACX_PTHREAD
132     LIBS="$PTHREAD_LIBS $LIBS"
133     CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
134     CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
135     CC="$PTHREAD_CC"
136 schoenebeck 852
137 schoenebeck 1454 # check for a bug in NPTL-enabled glibc
138     # (see Gentoo bug report #194076)
139     AC_ARG_ENABLE(nptl-bug-check,
140     [ --disable-nptl-bug-check
141     Disable check for a bug in certain NPTL-enabled
142     glibc versions that caused crashs.],
143     [config_check_nptl_bug="$enableval"],
144     [config_check_nptl_bug="yes"]
145     )
146     if test "$config_check_nptl_bug" = "yes"; then
147     m4_ifdef([m4_include(m4/nptl_bug.m4)],,
148     [sinclude([m4/nptl_bug.m4])])
149     ACX_NPTL_GLIBC_BUG([
150     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
151     echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
152     echo "probably crash due to this. Please report us the system you are"
153     echo "using and/or file a bug report to the bug tracking system of"
154     echo "your distribution."
155     echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
156     echo "well, you can try to circumvent this problem for now by setting"
157     echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
158     echo "should cause this test to pass."
159     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
160     AC_MSG_ERROR([possibly NPTL glibc bug detected])
161     ])
162     else
163     echo "NPTL glibc bug check disabled"
164     fi
165    
166 schoenebeck 1742 # FIXME: this is actually a dependency of libgig, not of LS directly, why
167     # isn't it hidden by libgig?
168     AC_CHECK_HEADERS(uuid/uuid.h)
169     AC_SEARCH_LIBS(uuid_generate, uuid)
170 schoenebeck 1454
171    
172 schoenebeck 1742
173 schoenebeck 852 ###########################################################################
174 schoenebeck 288 # Checks for available audio and MIDI systems / drivers
175     # (we throw an error if there's not at least one system for audio output and MIDI input available)
176 schoenebeck 852
177 schoenebeck 288 have_midi_input_driver="false"
178     have_audio_output_driver="false"
179    
180 schoenebeck 852 # ALSA
181     AC_ARG_ENABLE(alsa-driver,
182     [ --disable-alsa-driver
183     Disable support for the Advanced Linux Sound
184     Architecture (ALSA).],
185 schoenebeck 1360 [config_alsa_driver="$enableval"],
186 schoenebeck 852 [config_alsa_driver="yes"]
187 schoenebeck 18 )
188 schoenebeck 852 have_alsa=0
189     if test "$config_alsa_driver" = "yes"; then
190     AC_CHECK_HEADER(alsa/asoundlib.h,
191     AC_CHECK_LIB(asound, main,
192     have_alsa=1
193     ,
194     have_alsa=0
195     )
196     ,
197     have_alsa=0
198     )
199     if test "$have_alsa" = "1"; then
200     have_midi_input_driver="true"
201     have_audio_output_driver="true";
202     fi
203    
204     echo -n "checking Alsa version... "
205     AC_LANG_SAVE
206     AC_LANG_C
207     AC_TRY_RUN([
208     #include <alsa/asoundlib.h>
209     void main(void) {
210     /* ensure backward compatibility */
211     #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
212     #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
213     #endif
214     exit(SND_LIB_MAJOR);
215     }
216     ],
217     alsa_major=0,
218     alsa_major=$?,
219     alsa_major=0
220     )
221     AC_TRY_RUN([
222     #include <alsa/asoundlib.h>
223     void main(void) {
224     /* ensure backward compatibility */
225     #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
226     #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
227     #endif
228     exit(SND_LIB_MINOR);
229     }
230     ],
231     alsa_minor=0,
232     alsa_minor=$?,
233     alsa_minor=0
234     )
235     AC_TRY_RUN([
236     #include <alsa/asoundlib.h>
237     void main(void) {
238     /* ensure backward compatibility */
239     #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
240     #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
241     #endif
242     exit(SND_LIB_SUBMINOR);
243     }
244     ],
245     alsa_subminor=0,
246     alsa_subminor=$?,
247     alsa_subminor=0
248     )
249     AC_LANG_RESTORE
250     echo "$alsa_major.$alsa_minor.$alsa_subminor";
251     AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
252     AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
253     AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
254     else
255     echo "ALSA support disabled by configure script parameter"
256 schoenebeck 18 fi
257 schoenebeck 291 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
258 schoenebeck 288 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
259 schoenebeck 18
260 schoenebeck 852 # JACK
261     AC_ARG_ENABLE(jack-driver,
262     [ --disable-jack-driver
263     Disable support for the Jack Audio Connection Kit
264     (JACK).],
265 schoenebeck 1360 [config_jack_driver="$enableval"],
266 schoenebeck 852 [config_jack_driver="yes"]
267 schoenebeck 18 )
268 schoenebeck 852 have_jack=0
269     if test "$config_jack_driver" = "yes"; then
270     PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
271     if test $have_jack = "1"; then
272     AC_SUBST(JACK_LIBS)
273     AC_SUBST(JACK_CFLAGS)
274 persson 1748 linuxsampler_save_LIBS=$LIBS
275     LIBS="$JACK_LIBS $LIBS"
276     AC_CHECK_FUNCS(jack_client_name_size jack_client_open)
277     LIBS=$linuxsampler_save_LIBS
278 schoenebeck 852 have_audio_output_driver="true";
279     fi
280 schoenebeck 33 else
281 schoenebeck 852 echo "JACK support disabled by configure script parameter"
282 schoenebeck 33 fi
283 schoenebeck 852 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
284     AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
285 schoenebeck 31
286 persson 1651 # JACK MIDI
287     have_jack_midi=0
288     if test $have_jack = "1"; then
289 persson 1652 linuxsampler_save_CFLAGS=$CFLAGS
290     linuxsampler_save_LIBS=$LIBS
291     CFLAGS="$JACK_CFLAGS $CFLAGS"
292     LIBS="$JACK_LIBS $LIBS"
293     AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
294     if test $have_jack_midi = "1"; then
295     AC_CHECK_FUNCS(jack_midi_get_event_count)
296     AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
297     jack_midi_clear_buffer(0, 0);
298     ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
299     [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
300     have_midi_input_driver="true"
301     fi
302     CFLAGS=$linuxsampler_save_CFLAGS
303     LIBS=$linuxsampler_save_LIBS
304 persson 1651 fi
305     AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
306     AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
307     [Define to 1 if you have JACK with MIDI support installed.])
308    
309 schoenebeck 838 # ARTS
310 schoenebeck 852 AC_ARG_ENABLE(arts-driver,
311     [ --disable-arts-driver
312     Disable support for the Analogue Realtime System
313     (aRts).],
314 schoenebeck 1360 [config_arts_driver="$enableval"],
315 schoenebeck 852 [config_arts_driver="yes"]
316     )
317     have_arts=0
318     if test "$config_arts_driver" = "yes"; then
319     m4_ifdef([m4_include(m4/arts.m4)],,
320     [sinclude([m4/arts.m4])])
321     AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
322     if test "$have_arts" = "1"; then
323     have_audio_output_driver="true"
324     fi
325     else
326     echo "ARTS support disabled by configure script parameter"
327 schoenebeck 838 fi
328     AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
329     AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
330    
331 senoner 1502 # ASIO AUDIO (Win32)
332     AC_ARG_ENABLE(asiosdk-dir,
333     [ --enable-asiosdk-dir
334     Directory where the ASIO SDK is located, this automatically
335     enables the compilation of the ASIO audio output driver.],
336     [config_asiosdk_dir="${enableval}"],
337     [config_asiosdk_dir="."]
338     )
339     AC_SUBST(config_asiosdk_dir)
340    
341     AC_ARG_ENABLE(asio-driver,
342     [ --disable-asio-driver
343     Disable support for the Windows ASIO driver.],
344     [config_asio_driver="$enableval"],
345     [config_asio_driver="yes"]
346     )
347     have_asio=0
348     ASIOSDK_BASEDIR=
349     if test "$config_asio_driver" = "yes"; then
350     asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
351     echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
352     if test -e $asiosdk_headerfile ; then
353     echo yes
354     have_asio=1
355     ASIOSDK_BASEDIR="$config_asiosdk_dir"
356     else
357     echo no
358     have_asio=0
359     fi
360     if test "$have_asio" = "1"; then
361     have_audio_output_driver="true"
362     fi
363     else
364     echo "Windows ASIO support disabled by configure script parameter"
365     fi
366     AC_SUBST(ASIOSDK_BASEDIR)
367     AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
368     AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
369    
370 schoenebeck 609 # MidiShare (Linux, OS X, Windows)
371 schoenebeck 852 AC_ARG_ENABLE(midishare-driver,
372     [ --disable-midishare-driver
373     Disable support for the MidiShare system.],
374 schoenebeck 1360 [config_midishare_driver="$enableval"],
375 schoenebeck 852 [config_midishare_driver="yes"]
376 schoenebeck 609 )
377 schoenebeck 852 have_midishare=0
378     if test "$config_midishare_driver" = "yes"; then
379     AC_CHECK_HEADER(MidiShare.h,
380     AC_CHECK_LIB(MidiShare, MidiCountEvs,
381     have_midishare=1,
382     have_midishare=0
383     )
384     ,
385     have_midishare=0
386     )
387     if test "$have_midishare" = "1"; then
388     have_midi_input_driver="true"
389     fi
390     else
391     echo "MidiShare support disabled by configure script parameter"
392 schoenebeck 609 fi
393     AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
394     AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
395    
396     # CoreMIDI (OS X)
397 schoenebeck 852 AC_ARG_ENABLE(coremidi-driver,
398     [ --disable-coremidi-driver
399     Disable support for the Apple CoreMIDI system.],
400 schoenebeck 1360 [config_coremidi_driver="$enableval"],
401 schoenebeck 852 [config_coremidi_driver="yes"]
402 schoenebeck 609 )
403 schoenebeck 852 have_coremidi=0
404     if test "$config_coremidi_driver" = "yes"; then
405     AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
406     have_coremidi=1,
407     have_coremidi=0
408     )
409     if test "$have_coremidi" = "1"; then
410     have_midi_input_driver="true"
411     fi
412     else
413     echo "CoreMIDI support disabled by configure script parameter"
414 schoenebeck 609 fi
415     AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
416     AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
417    
418 iliev 1829 # CoreAudio (OS X)
419     AC_ARG_ENABLE(coreaudio-driver,
420     [ --disable-coreaudio-driver
421     Disable support for the Apple CoreAudio system.],
422     [config_coreaudio_driver="$enableval"],
423     [config_coreaudio_driver="yes"]
424     )
425     have_coreaudio=0
426     if test "$config_coreaudio_driver" = "yes"; then
427     AC_CHECK_HEADER(CoreAudio/CoreAudio.h,
428     have_coreaudio=1,
429     have_coreaudio=0
430     )
431     if test "$have_coreaudio" = "1"; then
432     have_audio_output_driver="true"
433     fi
434     else
435     echo "CoreAudio support disabled by configure script parameter"
436     fi
437     AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1")
438     AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.])
439    
440 senoner 1502 # MME MIDI (Win32)
441     AC_ARG_ENABLE(mmemidi-driver,
442     [ --disable-mmemidi-driver
443     Disable support for the Windows MME MIDI system.],
444     [config_mmemidi_driver="$enableval"],
445     [config_mmemidi_driver="yes"]
446     )
447     have_mmemidi=0
448     if test "$config_mmemidi_driver" = "yes"; then
449     AC_CHECK_HEADERS(mmsystem.h,
450     have_mmemidi=1,
451     have_mmemidi=0
452     )
453     if test "$have_mmemidi" = "1"; then
454     have_midi_input_driver="true"
455     fi
456     else
457     echo "MME MIDI support disabled by configure script parameter"
458     fi
459     AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
460     AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
461    
462 persson 1777
463     # DSSI
464     AC_CHECK_HEADERS(dssi.h,
465     have_dssi=1,
466     have_dssi=0)
467     AM_CONDITIONAL(HAVE_DSSI, test $have_dssi = "1")
468    
469     # LV2
470     PKG_CHECK_MODULES(LV2, lv2core, have_lv2=1, have_lv2=0)
471     if test $have_lv2 = "0"; then
472     AC_CHECK_HEADER(lv2.h, have_lv2=1, have_lv2=0)
473     fi
474     AM_CONDITIONAL(HAVE_LV2, test $have_lv2 = "1")
475    
476     # VST
477     AC_ARG_ENABLE(vstsdk-dir,
478     [ --enable-vstsdk-dir
479     Directory where the VST SDK is located.
480     This automatically enables the compilation
481     of the VST plugin.],
482     [VSTSDK_DIR="${enableval}"],
483     [VSTSDK_DIR=]
484     )
485     AC_SUBST(VSTSDK_DIR)
486     AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
487    
488 iliev 1846 # AU
489     AC_CHECK_HEADERS(AudioUnit/AudioUnit.h,
490     have_au=1,
491     have_au=0)
492     AM_CONDITIONAL(HAVE_AU, test $have_au = "1")
493 iliev 1855 AM_CONDITIONAL(HAVE_AUFLAGS, test "$AUFLAGS" != "")
494 persson 1777
495 iliev 1846
496 schoenebeck 1364 # have we found at least one MIDI input and one audio output driver ?
497     if test "$have_midi_input_driver" = "false"; then
498     echo "No supported MIDI input system found!"
499     echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
500 persson 1652 echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
501 schoenebeck 1364 echo "If you think you have one of those available on your system, make sure you"
502     echo "also have the respective development (header) files installed."
503     exit -1;
504     fi
505     if test "$have_audio_output_driver" = "false"; then
506     echo "No supported audio output system found!"
507 persson 1652 echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
508 schoenebeck 1364 echo "driver at the moment!"
509     exit -1;
510     fi
511    
512    
513    
514     ###########################################################################
515     # Checks for various DLL libraries
516    
517 schoenebeck 504 # Check presence of libgig
518 schoenebeck 1560 libgig_version="3.2.1"
519 schoenebeck 504 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
520     if test "$HAVE_GIG" = "false"; then
521     echo "Required libgig version not found!"
522     echo "You need to have libgig version ${libgig_version} installed!"
523     exit -1;
524 schoenebeck 714 else
525     echo "yes, found libgig $libgig_version"
526 schoenebeck 504 fi
527     AC_SUBST(GIG_CFLAGS)
528     AC_SUBST(GIG_LIBS)
529    
530 schoenebeck 1364 # Instruments DB feature (requires SQLite 3.3)
531     AC_ARG_ENABLE(instruments-db,
532     [ --disable-instruments-db
533     Disable compilation of the sampler's instruments
534     database feature. You need to have SQLite 3.3
535     or younger installed for this feature.],
536     [config_instruments_db="$enableval"],
537     [config_instruments_db="yes"]
538     )
539     HAVE_SQLITE3=0;
540     if test "$config_instruments_db" = "yes"; then
541     # Check presence of sqlite3
542     sqlite_version="3.3"
543     PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
544     AC_SUBST(SQLITE3_LIBS)
545     AC_SUBST(SQLITE3_CFLAGS)
546     if test $HAVE_SQLITE3 = false; then
547     HAVE_SQLITE3=0
548     config_instruments_db="no"
549     echo "*** Required sqlite version not found!"
550     echo "*** You need to have sqlite version ${sqlite_version} or higher"
551     echo "*** for instruments database support to be enabled."
552     echo "*** Support for instruments DB will be disabled!"
553     else
554     HAVE_SQLITE3=1
555     fi
556 senkov 397 else
557 schoenebeck 1364 echo "Instruments DB feature disabled by configure script parameter"
558 senkov 397 fi
559     AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
560 schoenebeck 1364 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
561 schoenebeck 31
562 schoenebeck 288
563    
564 schoenebeck 554 ###########################################################################
565     # Handle Configuration Options
566    
567     # TODO: should we use AC_ARG_VAR(variable, description) instead?
568    
569 schoenebeck 617 AC_ARG_ENABLE(asm,
570 schoenebeck 1259 [ --disable-asm
571 schoenebeck 738 Enable hand-crafted assembly optimizations
572 schoenebeck 1259 (default=on). LinuxSampler provides CPU specific
573     assembly optimizations. This is currently limited
574     to just enter a fast (denormal) FPU mode on x86
575     platforms. There are currently no synthesis core
576     assembly optimizations anymore since LS 0.4.0],
577 schoenebeck 1360 [config_asm="$enableval"],
578 schoenebeck 1259 [config_asm="yes"]
579 schoenebeck 617 )
580     if test "$config_asm" = "yes"; then
581 schoenebeck 1259 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
582 schoenebeck 617 fi
583    
584 schoenebeck 554 AC_ARG_ENABLE(dev-mode,
585 schoenebeck 1424 [ --enable-dev-mode
586     Enable development mode (default=off). In that mode
587 schoenebeck 554 we do some extra sanity checks here and there.
588     This helps to spot possible problems, but reduces
589     efficiency a bit],
590 schoenebeck 1360 [config_dev_mode="$enableval"],
591 schoenebeck 1424 [config_dev_mode="no"]
592 schoenebeck 554 )
593     if test "$config_dev_mode" = "yes"; then
594     AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
595     fi
596    
597     AC_ARG_ENABLE(debug-level,
598     [ --enable-debug-level
599     Specify verbosity of console messages (default=1).
600     The higher the value, the higher will be verbosity.
601     A value of 0 means no console output at all.
602     There's not really an upper limit but the usual
603     level of all messages is currently somewhere less
604     than 10.],
605     [config_debug_level="${enableval}"],
606     [config_debug_level="1"]
607     )
608     AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
609    
610     AC_ARG_ENABLE(rt-exceptions,
611     [ --enable-rt-exceptions
612     Enable exceptions in the realtime thread
613     (default=no). If this is enabled, exceptions will
614     be thrown on critical errors in the realtime
615     context as well. Otherwise if disabled
616     segmentation faults will be forced by the
617     application on critical errors.],
618 schoenebeck 1360 [config_rt_exceptions="$enableval"],
619 schoenebeck 554 [config_rt_exceptions="no"]
620     )
621     if test "$config_rt_exceptions" = "yes"; then
622     AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
623     fi
624    
625 nagata 1649 AC_ARG_ENABLE(pthread-testcancel,
626     [ --enable-pthread-testcancel
627 schoenebeck 1742 Enable pthread_testcancel() calls and avoid asynchronous
628 nagata 1649 cancel of pthreads (default=no).],
629     [config_pthread_testcancel="$enableval"],
630     [config_pthread_testcancel="no"]
631     )
632     if test "$config_pthread_testcancel" = "yes"; then
633     AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
634     fi
635    
636 schoenebeck 554 AC_ARG_ENABLE(preload-samples,
637     [ --enable-preload-samples
638     Due to seeking and latency issues with hard drives
639     we have to cache a small part of samples' head in
640     RAM (default=32768). The higher this value the
641     more memory will be occupied for each sample, but
642     the safer this will be in regards of possible
643     droputs. A 'good' value depends on the running
644     system and usage dependant factors.],
645     [config_preload_samples="${enableval}"],
646     [config_preload_samples="32768"]
647     )
648     AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
649    
650     AC_ARG_ENABLE(max-pitch,
651     [ --enable-max-pitch
652     Specify the maximum allowed pitch value in octaves
653     (default=4). To lower memory usage you might want
654     set a smaller value.],
655     [config_max_pitch="${enableval}"],
656     [config_max_pitch="4"]
657     )
658     AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
659    
660     AC_ARG_ENABLE(max-events,
661     [ --enable-max-events
662     Specify the maximum allowed amount of events to be
663     processed per fragment (default=1024).],
664     [config_max_events="${enableval}"],
665     [config_max_events="1024"]
666     )
667     AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
668    
669     AC_ARG_ENABLE(eg-bottom,
670     [ --enable-eg-bottom
671     Bottom limit of envelope generators
672     (default=0.001). Certain kinds of curve types like
673     exponential curves converge against 0 but never
674     reach 0. So we have to define a certain low value
675     after which we should consider all smaller values
676     to be 'almost zero'. The smaller this value, the
677     longer will voices survive in EG's release stage
678     and thus waste voices. If this value is too high
679     will cause click sounds though.],
680     [config_eg_bottom="${enableval}"],
681     [config_eg_bottom="0.001"]
682     )
683     AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
684    
685     AC_ARG_ENABLE(eg-min-release-time,
686     [ --enable-eg-min-release-time
687     Specify the lowest allowed release time in seconds
688     (default=0.0025). This value will also be used to
689     ramp down voices on voice stealing. This value
690     should always be less than the period time of the
691     used audio driver, as in case of voice stealing
692     the killed voice needs to be completely ramped
693     down in the same fragment.],
694     [config_eg_min_release_time="${enableval}"],
695     [config_eg_min_release_time="0.0025"]
696     )
697     AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
698    
699     AC_ARG_ENABLE(refill-streams,
700     [ --enable-refill-streams
701     Number of streams that should be refilled in each
702     disk thread cycle (default=4).],
703     [config_refill_streams="${enableval}"],
704     [config_refill_streams="4"]
705     )
706     AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
707    
708     AC_ARG_ENABLE(stream-min-refill,
709     [ --enable-stream-min-refill
710     Minimum refill size for disk streams (default=1024).
711     The disk thread will go to sleep for a while if no
712     stream had to be refilled more than this value in
713     a disk thread cycle.],
714     [config_stream_min_refill="${enableval}"],
715     [config_stream_min_refill="1024"]
716     )
717     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
718    
719     AC_ARG_ENABLE(stream-max-refill,
720     [ --enable-stream-max-refill
721     Maximum refill size for disk streams
722     (default=65536). The disk thread will refill
723     each stream only by a size of this value per
724     disk thread cycle.],
725     [config_stream_max_refill="${enableval}"],
726     [config_stream_max_refill="65536"]
727     )
728     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
729    
730     AC_ARG_ENABLE(stream-size,
731     [ --enable-stream-size
732     Size of each stream's ring buffer in sample points
733     (default=262144).],
734     [config_stream_size="${enableval}"],
735     [config_stream_size="262144"]
736     )
737     AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
738    
739     AC_ARG_ENABLE(max-streams,
740     [ --enable-max-streams
741 schoenebeck 1800 Initial maximum amount of disk streams
742     (default=90). This value can be changed at
743     runtime. It should always be higher than the
744     maximum amount of voices.],
745 schoenebeck 554 [config_max_streams="${enableval}"],
746     [config_max_streams="90"]
747     )
748 schoenebeck 1800 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
749 schoenebeck 554
750     AC_ARG_ENABLE(max-voices,
751     [ --enable-max-voices
752 schoenebeck 1800 Initial maximum amount of voices (default=64).
753     This value can be changed at runtime. It should
754     always be lower than the maximum amount of disk
755     streams.],
756 schoenebeck 554 [config_max_voices="${enableval}"],
757     [config_max_voices="64"]
758     )
759 schoenebeck 1800 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
760 schoenebeck 554
761 schoenebeck 738 AC_ARG_ENABLE(subfragment-size,
762     [ --enable-subfragment-size
763     Every audio fragment will be splitted into
764     subfragments. Where each subfragment renders
765     audio with constant synthesis parameters. This is
766     done for efficiency reasons. This parameter
767     defines the default size of a subfragment in
768     sample points. A large value means less CPU time
769     whereas a low value means better audio quality
770     (default=32).],
771     [config_subfragment_size="${enableval}"],
772     [config_subfragment_size="32"]
773     )
774     AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
775    
776 schoenebeck 1005 AC_ARG_ENABLE(global-attenuation-default,
777     [ --enable-global-attenuation-default
778 schoenebeck 781 To prevent clipping all samples will be lowered
779 schoenebeck 1005 in amplitude by this given default factor (can
780     be overridden at runtime).
781 schoenebeck 781 (default=0.35)],
782 schoenebeck 1005 [config_global_attenuation_default="${enableval}"],
783     [config_global_attenuation_default="0.35"]
784 schoenebeck 781 )
785 schoenebeck 1005 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
786 schoenebeck 781
787 schoenebeck 554 AC_ARG_ENABLE(voice-steal-algo,
788     [ --enable-voice-steal-algo
789     Voice stealing algorithm to be used. Currently
790     available options:
791     none:
792     Disable voice stealing completely.
793 schoenebeck 563 oldestvoiceonkey (default):
794 schoenebeck 554 Try to kill a voice on the same key first,
795     if no success, proceed with the oldest key.
796 schoenebeck 563 oldestkey:
797 schoenebeck 554 Try to kill a voice from the oldest active
798     key.],
799     [ if test ! "(" "${enableval}" = "none" \
800     -o "${enableval}" = "oldestvoiceonkey" \
801     -o "${enableval}" = "oldestkey" ")" ; then
802     AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
803     else
804     config_voice_steal_algo="${enableval}"
805 schoenebeck 579 fi
806 schoenebeck 554 ],
807 schoenebeck 563 [config_voice_steal_algo="oldestvoiceonkey"]
808 schoenebeck 554 )
809     AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
810    
811     AC_ARG_ENABLE(sysex-buffer-size,
812     [ --enable-sysex-buffer-size
813     System Exclusive Message buffer size in kB
814     (default=2048).],
815     [config_sysex_buffer_size="${enableval}"],
816     [config_sysex_buffer_size="2048"]
817     )
818     AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
819    
820     AC_ARG_ENABLE(force-filter,
821     [ --enable-force-filter
822     If enabled will force filter to be used even if
823     no usage was define in instrument patch files.
824     (default=no).],
825 schoenebeck 1360 [config_force_filter="$enableval"],
826 schoenebeck 554 [config_force_filter="no"]
827     )
828     if test "$config_force_filter" = "yes"; then
829     AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
830     fi
831    
832     AC_ARG_ENABLE(filter-cutoff-min,
833     [ --enable-filter-cutoff-min
834     Minimum filter cutoff frequency in Hz
835     (default=100.0).],
836     [config_filter_cutoff_min="${enableval}"],
837     [config_filter_cutoff_min="100.0"]
838     )
839     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
840    
841     AC_ARG_ENABLE(filter-cutoff-max,
842     [ --enable-filter-cutoff-max
843     Maximum filter cutoff frequency in Hz
844     (default=10000.0).],
845     [config_filter_cutoff_max="${enableval}"],
846     [config_filter_cutoff_max="10000.0"]
847     )
848     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
849    
850     AC_ARG_ENABLE(override-cutoff-ctrl,
851     [ --enable-override-cutoff-ctrl
852     Override filter cutoff MIDI controller (default=no).
853     Note: you have to define the MIDI controller number
854     here, it's not a boolean parameter type! If this
855     option is used, controller number given by
856     instrument patch will be ignored and instead this
857     supplied value will be used.],
858     [config_override_cutoff_ctrl="${enableval}"],
859     [config_override_cutoff_ctrl="no"]
860     )
861     if test ! "$config_override_cutoff_ctrl" = "no"; then
862     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
863     fi
864    
865     AC_ARG_ENABLE(override-resonance-ctrl,
866     [ --enable-override-resonance-ctrl
867     Override filter resonance MIDI controller
868     (default=no). Note: you have to define the MIDI
869     controller number here, it's not a boolean
870     parameter type! If this option is used, controller
871     number given by instrument patch will be ignored
872     and instead this supplied value will be used.],
873     [config_override_resonance_ctrl="${enableval}"],
874     [config_override_resonance_ctrl="no"]
875     )
876     if test ! "$config_override_resonance_ctrl" = "no"; then
877     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
878     fi
879    
880     AC_ARG_ENABLE(override-filter-type,
881     [ --enable-override-filter-type
882     Override filter type (default=no). Options:
883     hp: for highpass
884     bp: for bandpass
885     br: for bandreject
886     lp: for lowpass
887     lpt: for lowpass turbo],
888     [ if test "${enableval}" = "hp" ; then
889     config_override_filter_type="::gig::vcf_type_highpass"
890     elif test "${enableval}" = "bp" ; then
891     config_override_filter_type="::gig::vcf_type_bandpass"
892     elif test "${enableval}" = "br" ; then
893     config_override_filter_type="::gig::vcf_type_bandreject"
894     elif test "${enableval}" = "lp" ; then
895     config_override_filter_type="::gig::vcf_type_lowpass"
896     elif test "${enableval}" = "lpt" ; then
897     config_override_filter_type="::gig::vcf_type_lowpassturbo"
898     elif test ! "${enableval}" = "no"; then
899     AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
900 schoenebeck 579 fi
901 schoenebeck 554 ],
902     [config_override_filter_type="no"]
903     )
904     if test ! "$config_override_filter_type" = "no"; then
905     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
906     fi
907    
908 schoenebeck 563 AC_ARG_ENABLE(gs-checksum,
909     [ --enable-gs-checksum
910     Enable Roland General Synth SysEx checksum check
911     (default=no). If this is enabled, all GS SysEx
912     messages which do not provide a correct checksum
913     will be ignored. This is disabled by default as
914     not all devices honor GS checksums.],
915 schoenebeck 1360 [config_assert_gs_sysex_checksum="$enableval"],
916 schoenebeck 563 [config_assert_gs_sysex_checksum="no"]
917     )
918     if test "config_assert_gs_sysex_checksum" = "yes"; then
919     AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
920     fi
921    
922 schoenebeck 829 AC_ARG_ENABLE(portamento-time-min,
923     [ --enable-portamento-time-min
924     Minimum Portamento time in seconds
925     (default=0.1).],
926     [config_portamento_time_min="${enableval}"],
927     [config_portamento_time_min="0.1"]
928     )
929     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
930    
931     AC_ARG_ENABLE(portamento-time-max,
932     [ --enable-portamento-time-max
933     Maximum Portamento time in seconds
934     (default=32).],
935     [config_portamento_time_max="${enableval}"],
936     [config_portamento_time_max="32"]
937     )
938     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
939    
940     AC_ARG_ENABLE(portamento-time-default,
941     [ --enable-portamento-time-default
942     Default Portamento time in seconds
943     (default=1).],
944     [config_portamento_time_default="${enableval}"],
945     [config_portamento_time_default="1"]
946     )
947     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
948    
949 schoenebeck 714 AC_ARG_ENABLE(signed-triang-algo,
950     [ --enable-signed-triang-algo
951     Signed triangular wave algorithm to be used (e.g. for LFOs).
952     Currently available options:
953     intmath:
954     Uses integer math without any branch will then be
955     converted to floating point value for each sample point.
956     This int->float conversion might hurt on some systems.
957 senkov 720 intmathabs:
958     Similar to intmath but uses abs() function.
959     Depending on compiler and platrofm this could
960     perform better than integer math as it avoids
961 schoenebeck 1360 an extra integer multiply instruction.
962 schoenebeck 714 diharmonic:
963     The triangular wave will be approximated by adding two
964     sinusoidials. This solution might especially hurt on
965     systems with weak floating point unit.
966     benchmark (default):
967     This is not an algorithm. Use this option if the
968     appropriate algorithm should be automatically
969     chosen by the configure script by performing a
970     benchmark between the algorithms mentioned above.
971     This will NOT work for cross compilation!],
972     [ if test ! "(" "${enableval}" = "intmath" \
973 senkov 720 -o "${enableval}" = "intmathabs" \
974 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
975     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
976     else
977     config_signed_triang_algo="${enableval}"
978     fi
979     ],
980     [config_signed_triang_algo="benchmark"]
981     )
982 schoenebeck 563
983 schoenebeck 714 AC_ARG_ENABLE(unsigned-triang-algo,
984     [ --enable-unsigned-triang-algo
985     Unsigned triangular wave algorithm to be used (e.g. for LFOs).
986     Currently available options:
987     intmath:
988     Uses integer math without any branch will then be
989     converted to floating point value for each sample point.
990     This int->float conversion might hurt on some systems.
991 senkov 720 intmathabs:
992     Similar to intmath but uses abs() function.
993     Depending on compiler and platrofm this could
994     perform better than integer math as it avoids
995 schoenebeck 1360 an extra integer multiply instruction.
996 schoenebeck 714 diharmonic:
997     The triangular wave will be approximated by adding two
998     sinusoidials. This solution might especially hurt on
999     systems with weak floating point unit.
1000     benchmark (default):
1001     This is not an algorithm. Use this option if the
1002     appropriate algorithm should be automatically
1003     chosen by the configure script by performing a
1004     benchmark between the algorithms mentioned above.
1005     This will NOT work for cross compilation!],
1006     [ if test ! "(" "${enableval}" = "intmath" \
1007 senkov 720 -o "${enableval}" = "intmathabs" \
1008 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
1009     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
1010     else
1011     config_unsigned_triang_algo="${enableval}"
1012     fi
1013     ],
1014     [config_unsigned_triang_algo="benchmark"]
1015     )
1016    
1017 iliev 716 AC_ARG_ENABLE(process-muted-channels,
1018     [ --enable-process-muted-channels
1019     Enable processing of muted channels (default=no).
1020     In that mode all MIDI events in the muted channels
1021     will be processed. This will provide information
1022     about the active voices in the muted channels and
1023     will not discard notes, triggered in mute mode,
1024     when the channel is unmuted. But also will reduce
1025     the efficiency.],
1026 schoenebeck 1360 [config_process_muted_channels="$enableval"],
1027 iliev 716 [config_process_muted_channels="no"]
1028     )
1029     if test "$config_process_muted_channels" = "yes"; then
1030     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
1031     fi
1032 schoenebeck 714
1033 schoenebeck 849 AC_ARG_ENABLE(process-all-notes-off,
1034     [ --disable-process-all-notes-off
1035     Disable interpretation of All-Notes-Off MIDI
1036     messages (default=on). By default LS will release
1037     all voices whenever it receives an All-Notes-Off
1038     MIDI message. You can disable this behavior, so
1039     that LS simply ignores such messages.],
1040 schoenebeck 1360 [config_process_all_notes_off="$enableval"],
1041 schoenebeck 849 [config_process_all_notes_off="yes"]
1042     )
1043     if test "$config_process_all_notes_off" = "yes"; then
1044     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
1045     fi
1046    
1047 persson 830 AC_ARG_ENABLE(interpolate-volume,
1048     [ --disable-interpolate-volume
1049     Disable interpolation of volume modulation
1050     (default=on). With this enabled, the volume changes
1051     generated by for example the envelope generator
1052     will be smoother, minimizing the risk for audio
1053     clicks. Disable it to reduce CPU usage.],
1054 schoenebeck 1360 [config_interpolate_volume="$enableval"],
1055 persson 830 [config_interpolate_volume="yes"]
1056     )
1057     if test "$config_interpolate_volume" = "yes"; then
1058     AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
1059     fi
1060 iliev 716
1061 schoenebeck 1762 AC_ARG_ENABLE(master-volume-sysex-by-port,
1062     [ --enable-master-volume-sysex-by-port
1063     Whether global volume sysex message should be
1064     applied globally to the whole sampler or only to
1065     the sampler channels connected to the same MIDI
1066     input port on which the sysex message arrived on.
1067     By default global volume sysex messages apply
1068     globally to the whole sampler, since many MIDI
1069     devices behave that way.],
1070     [config_master_volume_sysex_by_port="$enableval"],
1071     [config_master_volume_sysex_by_port="no"]
1072     )
1073     if test "$config_master_volume_sysex_by_port" = "yes"; then
1074     AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
1075     fi
1076    
1077 schoenebeck 1212 AC_ARG_ENABLE(plugin-dir,
1078     [ --enable-plugin-dir
1079     Directory where the sampler shall look for potential plugins,
1080     that is 3rd party shared libraries that should be loaded by
1081     the sampler on startup. By default the sampler will search
1082     for plugins in the subdirectory "plugins" below its own
1083     library directory.
1084     (i.e. /usr/local/lib/linuxsampler/plugins)],
1085     [config_plugin_dir="${enableval}"],
1086     [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1087     )
1088     AC_SUBST(config_plugin_dir)
1089 persson 830
1090 schoenebeck 1364 AC_ARG_ENABLE(default-instruments-db-location,
1091     [ --enable-default-instruments-db-location
1092     Only when instruments DB feature is enabled: file name
1093     which shall be taken as default location of the
1094     instruments DB file. This location can still be
1095     overridden at runtime with a command line switch.
1096     (default: /var/lib/linuxsampler/instruments.db)],
1097     [config_default_instruments_db_file="${enableval}"],
1098     [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1099     )
1100     AC_DEFINE_UNQUOTED(
1101     CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1102     "$config_default_instruments_db_file",
1103     [Only when instruments DB feature is enabled: default location of the DB file.]
1104     )
1105 schoenebeck 1432 AC_SUBST(config_default_instruments_db_file)
1106 schoenebeck 1212
1107 schoenebeck 1364
1108 schoenebeck 554 ###########################################################################
1109 schoenebeck 714 # Automatic Benchmarks (to detect the best algorithms for the system)
1110    
1111     AC_LANG_SAVE
1112    
1113     if test "$config_signed_triang_algo" = "benchmark"; then
1114     echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1115     AC_LANG_CPLUSPLUS
1116     AC_TRY_RUN([
1117     #define SIGNED 1
1118     #define SILENT 1
1119 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1120 schoenebeck 714 ],
1121     triang_signed=0,
1122     triang_signed=$?,
1123     triang_signed=0
1124     )
1125     if test "$triang_signed" = "2"; then
1126     config_signed_triang_algo="intmath"
1127     echo "integer math"
1128     elif test "$triang_signed" = "3"; then
1129     config_signed_triang_algo="diharmonic"
1130     echo "di harmonics"
1131 senkov 720 elif test "$triang_signed" = "5"; then
1132     config_signed_triang_algo="intmathabs"
1133     echo "integer math using abs()"
1134 schoenebeck 714 else
1135     echo "Benchmark of signed triangular wave algorithms failed!"
1136     echo "Maybe you are doing cross compilation? In that case you have to select"
1137     echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1138     echo "Call './configure --help' for further information or read configure.in."
1139     exit -1;
1140     fi
1141 schoenebeck 1165 else
1142     case "$config_signed_triang_algo" in
1143     intmath)
1144     triang_signed=2 ;;
1145     diharmonic)
1146     triang_signed=3 ;;
1147     intmathabs)
1148     triang_signed=5 ;;
1149     esac
1150 schoenebeck 714 fi
1151 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1152 schoenebeck 714
1153     if test "$config_unsigned_triang_algo" = "benchmark"; then
1154     echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1155     AC_LANG_CPLUSPLUS
1156     AC_TRY_RUN([
1157     #define SIGNED 0
1158     #define SILENT 1
1159 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1160 schoenebeck 714 ],
1161     triang_unsigned=0,
1162     triang_unsigned=$?,
1163     triang_unsigned=0
1164     )
1165     if test "$triang_unsigned" = "2"; then
1166     config_unsigned_triang_algo="intmath"
1167     echo "integer math"
1168     elif test "$triang_unsigned" = "3"; then
1169     config_unsigned_triang_algo="diharmonic"
1170     echo "di harmonics"
1171 senkov 720 elif test "$triang_unsigned" = "5"; then
1172 schoenebeck 726 config_unsigned_triang_algo="intmathabs"
1173 senkov 720 echo "integer math using abs()"
1174 schoenebeck 714 else
1175     echo "Benchmark of unsigned triangular wave algorithms failed!"
1176     echo "Maybe you are doing cross compilation? In that case you have to select"
1177     echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1178     echo "Call './configure --help' for further information or read configure.in."
1179     exit -1;
1180     fi
1181 schoenebeck 1165 else
1182     case "$config_unsigned_triang_algo" in
1183     intmath)
1184     triang_unsigned=2 ;;
1185     diharmonic)
1186     triang_unsigned=3 ;;
1187     intmathabs)
1188     triang_unsigned=5 ;;
1189     esac
1190 schoenebeck 714 fi
1191 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1192 schoenebeck 714
1193     AC_LANG_RESTORE
1194    
1195    
1196     ###########################################################################
1197 schoenebeck 554 # Create Build Files
1198    
1199 schoenebeck 9 AM_CONFIG_HEADER(config.h)
1200 schoenebeck 697 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1201 schoenebeck 9
1202     AC_LANG_CPLUSPLUS
1203 persson 497
1204 persson 685 # some gcc 4.0 versions need -msse for SSE register allocations
1205     if test "$config_asm" = "yes"; then
1206     if test "$def_arch_x86" = 1; then
1207     CXXFLAGS="$CXXFLAGS -msse"
1208     fi
1209     fi
1210    
1211 persson 497 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1212     # this, the dlfcn.h check in am_prog_libtool may fail.
1213     AC_CHECK_HEADER(stdlib.h)
1214    
1215 schoenebeck 654 AC_OUTPUT( \
1216     Makefile \
1217     man/Makefile \
1218     man/linuxsampler.1 \
1219     src/Makefile \
1220 iliev 1161 src/db/Makefile \
1221 schoenebeck 654 src/network/Makefile \
1222     src/engines/Makefile \
1223     src/engines/gig/Makefile \
1224     src/engines/common/Makefile \
1225 schoenebeck 1722 src/effects/Makefile \
1226 schoenebeck 1321 src/common/Makefile \
1227 schoenebeck 654 src/testcases/Makefile \
1228     src/drivers/Makefile \
1229     src/drivers/audio/Makefile \
1230     src/drivers/midi/Makefile \
1231 schoenebeck 1375 src/plugins/Makefile \
1232 persson 1777 src/hostplugins/Makefile \
1233     src/hostplugins/dssi/Makefile \
1234     src/hostplugins/lv2/Makefile \
1235     src/hostplugins/vst/Makefile \
1236 iliev 1846 src/hostplugins/au/Makefile \
1237 schoenebeck 654 linuxsampler.spec \
1238     debian/Makefile \
1239     Artwork/Makefile \
1240     scripts/Makefile \
1241     osx/Makefile \
1242 schoenebeck 1175 osx/linuxsampler.xcodeproj/Makefile \
1243 schoenebeck 654 Documentation/Makefile \
1244     Documentation/Engines/Makefile \
1245     Documentation/Engines/gig/Makefile \
1246 schoenebeck 697 linuxsampler.pc \
1247     Doxyfile \
1248 schoenebeck 654 )
1249 schoenebeck 554
1250 schoenebeck 1212 # resolve all nested variables in '${config_plugin_dir}'
1251     # (merely for providing a human readable summary below)
1252     while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1253     config_plugin_dir=`eval echo ${config_plugin_dir}`
1254     done
1255 schoenebeck 554
1256 schoenebeck 1212
1257 schoenebeck 554 ###########################################################################
1258     # Output All Configuration Options
1259    
1260     echo ""
1261     echo "#####################################################################"
1262     echo "# LinuxSampler Configuration #"
1263     echo "#-------------------------------------------------------------------#"
1264 schoenebeck 617 echo "# Assembly Optimizations: ${config_asm}"
1265 schoenebeck 554 echo "# Development Mode: ${config_dev_mode}"
1266     echo "# Debug Level: ${config_debug_level}"
1267     echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1268     echo "# Preload Samples: ${config_preload_samples}"
1269     echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1270     echo "# Maximum Events: ${config_max_events}"
1271     echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1272     echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1273     echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1274     echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1275     echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1276     echo "# Stream Size: ${config_stream_size}"
1277 schoenebeck 1800 echo "# Default Maximum Disk Streams: ${config_max_streams}"
1278     echo "# Default Maximum Voices: ${config_max_voices}"
1279 schoenebeck 738 echo "# Default Subfragment Size: ${config_subfragment_size}"
1280 schoenebeck 1005 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1281 schoenebeck 563 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1282 schoenebeck 714 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1283     echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1284 schoenebeck 554 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1285 schoenebeck 829 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1286     echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1287     echo "# Default Portamento Time: ${config_portamento_time_default} s"
1288 schoenebeck 554 echo "# Force Filter Usage: ${config_force_filter}"
1289     echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1290     echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1291     echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1292     echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1293     echo "# Override Filter Type: ${config_override_filter_type}"
1294 schoenebeck 563 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1295 iliev 716 echo "# Process Muted Channels: ${config_process_muted_channels}"
1296 schoenebeck 849 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1297 schoenebeck 1762 echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
1298 persson 830 echo "# Interpolate Volume: ${config_interpolate_volume}"
1299 schoenebeck 1364 echo "# Instruments database support: ${config_instruments_db}"
1300     if test "$config_instruments_db" = "yes"; then
1301     echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1302     fi
1303 schoenebeck 1212 echo "# Plugin Path: ${config_plugin_dir}"
1304 schoenebeck 554 echo "#-------------------------------------------------------------------#"
1305     echo "# Read './configure --help' or file 'configure.in' for details. #"
1306     echo "#####################################################################"
1307     echo ""
1308     echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1309     echo ""

  ViewVC Help
Powered by ViewVC