/[svn]/linuxsampler/trunk/configure.in
ViewVC logotype

Annotation of /linuxsampler/trunk/configure.in

Parent Directory Parent Directory | Revision Log Revision Log


Revision 738 - (hide annotations) (download)
Tue Aug 16 17:14:25 2005 UTC (18 years, 7 months ago) by schoenebeck
File size: 34449 byte(s)
* extensive synthesis optimization: reimplementation of EGs and LFO(s),
  removed synthesis parameter prerendering and the synthesis parameter
  matrix in general, splitting each audio fragment into subfragments now
  where each subfragment uses constant synthesis parameters
  (everything's still very buggy ATM)

1 schoenebeck 9 AC_INIT(configure.in)
2 schoenebeck 697
3     #------------------------------------------------------------------------------------
4     # LinuxSampler's / liblinuxsampler's "official" release version:
5    
6     LINUXSAMPLER_RELEASE_MAJOR=0
7     LINUXSAMPLER_RELEASE_MINOR=3
8     LINUXSAMPLER_RELEASE_BUILD=3
9    
10     #------------------------------------------------------------------------------------
11     # The following is the libtool / shared library version. This doesn't have to
12     # do anything with the release version. It MUST conform to the following rules:
13     #
14     # 1. Start with version information of `0:0:0' for each libtool library.
15     # 2. Update the version information only immediately before a public release of
16     # your software. More frequent updates are unnecessary, and only guarantee
17     # that the current interface number gets larger faster.
18     # 3. If the library source code has changed at all since the last update, then
19     # increment revision (`c:r:a' becomes `c:r+1:a').
20     # 4. If any interfaces have been added, removed, or changed since the last update,
21     # increment current, and set revision to 0.
22     # 5. If any interfaces have been added since the last public release, then increment
23     # age.
24     # 6. If any interfaces have been removed since the last public release, then set age
25     # to 0.
26    
27     LIBLINUXSAMPLER_LT_CURRENT=0
28     LIBLINUXSAMPLER_LT_REVISION=0
29     LIBLINUXSAMPLER_LT_AGE=0
30     SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31    
32     AM_PROG_LIBTOOL
33    
34     AC_SUBST(SHLIB_VERSION_ARG)
35     AC_SUBST(SHARED_VERSION_INFO)
36    
37 schoenebeck 12 AC_C_BIGENDIAN
38 schoenebeck 9 AC_CANONICAL_SYSTEM
39    
40 schoenebeck 80 AC_SUBST(target)
41     AC_SUBST(target_alias)
42     AC_SUBST(target_cpu)
43     AC_SUBST(target_os)
44     AC_SUBST(target_vendor)
45 schoenebeck 18
46 schoenebeck 275
47 schoenebeck 554 ###########################################################################
48     # General Checks
49 schoenebeck 275
50 schoenebeck 510 AC_MSG_CHECKING([whether x86 architecture])
51 schoenebeck 9 def_arch_x86=0
52     case $target_cpu in
53     "i386" | "i486" | "i586" | "i686" | "i786")
54     echo "yes"
55     def_arch_x86=1;;
56     *)
57     echo "no";;
58     esac
59     AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
60    
61 schoenebeck 510 # determine the right gcc switch for CPU specific optimizations
62     CXX_CPU_SWITCH=
63     if test "$def_arch_x86" = 1; then
64     CXX_CPU_SWITCH="-march=$target_cpu"
65     elif test "$target_cpu" = "powerpc"; then
66     CXX_CPU_SWITCH="-arch=$target_cpu"
67     fi
68     AC_SUBST([CXX_CPU_SWITCH])
69    
70 schoenebeck 288 AC_MSG_CHECKING([whether UNIX98 compatible])
71     AC_LANG_SAVE
72     AC_LANG_C
73     AC_TRY_RUN([
74     #ifndef _GNU_SOURCE
75     #define _GNU_SOURCE 1
76     #endif
77     #include <features.h>
78     void main(void) {
79     #if _XOPEN_SOURCE >= 500
80     exit(0); /* UNIX98 compatible */
81     #else
82     exit(-1); /* not UNIX98 compatible */
83     #endif
84     }
85     ],
86     have_unix98="yes",
87     have_unix98="no",
88     have_unix98="no"
89     )
90     AC_LANG_RESTORE
91     AC_MSG_RESULT([$have_unix98])
92     if test "$have_unix98" = "no"; then
93     if test "x$HAVE_UNIX98" = "x"; then
94     echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
95     echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
96     echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
97     echo "have a UNIX98 compatible system."
98     exit -1;
99     fi
100     fi
101    
102     # Checks for available audio and MIDI systems / drivers
103     # (we throw an error if there's not at least one system for audio output and MIDI input available)
104     have_midi_input_driver="false"
105     have_audio_output_driver="false"
106    
107 schoenebeck 18 AC_CHECK_HEADER(alsa/asoundlib.h,
108     AC_CHECK_LIB(asound, main,
109 schoenebeck 291 have_alsa=1
110 schoenebeck 18 ,
111 schoenebeck 291 have_alsa=0
112 schoenebeck 18 )
113     ,
114 schoenebeck 291 have_alsa=0
115 schoenebeck 18 )
116 schoenebeck 291 if test "$have_alsa" = "1"; then
117 schoenebeck 288 have_midi_input_driver="true"
118     have_audio_output_driver="true";
119 schoenebeck 18 fi
120 schoenebeck 291 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
121 schoenebeck 288 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
122 schoenebeck 18
123     echo -n "checking Alsa version... "
124     AC_LANG_SAVE
125     AC_LANG_C
126     AC_TRY_RUN([
127     #include <alsa/asoundlib.h>
128     void main(void) {
129     /* ensure backward compatibility */
130     #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
131     #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
132     #endif
133     exit(SND_LIB_MAJOR);
134     }
135     ],
136     alsa_major=0,
137     alsa_major=$?,
138     alsa_major=0
139     )
140     AC_TRY_RUN([
141     #include <alsa/asoundlib.h>
142     void main(void) {
143     /* ensure backward compatibility */
144     #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
145     #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
146     #endif
147     exit(SND_LIB_MINOR);
148     }
149     ],
150     alsa_minor=0,
151     alsa_minor=$?,
152     alsa_minor=0
153     )
154     AC_TRY_RUN([
155     #include <alsa/asoundlib.h>
156     void main(void) {
157     /* ensure backward compatibility */
158     #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
159     #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
160     #endif
161     exit(SND_LIB_SUBMINOR);
162     }
163     ],
164     alsa_subminor=0,
165     alsa_subminor=$?,
166     alsa_subminor=0
167     )
168     AC_LANG_RESTORE
169     echo "$alsa_major.$alsa_minor.$alsa_subminor";
170     AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
171     AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
172     AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
173    
174 schoenebeck 31 # JACK
175     PKG_CHECK_MODULES(JACK, jack, HAVE_JACK=true, HAVE_JACK=false)
176     AC_SUBST(JACK_LIBS)
177     AC_SUBST(JACK_CFLAGS)
178 schoenebeck 33 if test $HAVE_JACK = false; then
179     HAVE_JACK=0;
180     else
181 schoenebeck 288 HAVE_JACK=1
182     have_audio_output_driver="true";
183 persson 379 AC_CHECK_LIB(jack, jack_client_name_size, [AC_DEFINE(HAVE_JACK_CLIENT_NAME_SIZE, 1, [Define to 1 if you have the `jack_client_name_size' function.])], , $JACK_LIBS)
184 schoenebeck 33 fi
185 schoenebeck 288 AM_CONDITIONAL(HAVE_JACK, test $HAVE_JACK = 1)
186 schoenebeck 31 AC_DEFINE_UNQUOTED(HAVE_JACK,$HAVE_JACK,[Define to 1 if you have JACK installed.])
187    
188 schoenebeck 609 # MidiShare (Linux, OS X, Windows)
189     AC_CHECK_HEADER(MidiShare.h,
190     AC_CHECK_LIB(MidiShare, MidiCountEvs,
191     have_midishare=1,
192     have_midishare=0
193     )
194     ,
195     have_midishare=0
196     )
197     if test "$have_midishare" = "1"; then
198     have_midi_input_driver="true"
199     fi
200     AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
201     AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
202    
203     # CoreMIDI (OS X)
204     AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
205     have_coremidi=1,
206     have_coremidi=0
207     )
208     if test "$have_coremidi" = "1"; then
209     have_midi_input_driver="true"
210     fi
211     AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
212     AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
213    
214 schoenebeck 504 # Check presence of libgig
215 schoenebeck 738 libgig_version="2.0.2"
216 schoenebeck 504 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
217     if test "$HAVE_GIG" = "false"; then
218     echo "Required libgig version not found!"
219     echo "You need to have libgig version ${libgig_version} installed!"
220     exit -1;
221 schoenebeck 714 else
222     echo "yes, found libgig $libgig_version"
223 schoenebeck 504 fi
224     AC_SUBST(GIG_CFLAGS)
225     AC_SUBST(GIG_LIBS)
226    
227 senkov 397 # SQLITE3
228     PKG_CHECK_MODULES(SQLITE3, sqlite3, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
229     AC_SUBST(SQLITE3_LIBS)
230     AC_SUBST(SQLITE3_CFLAGS)
231     if test $HAVE_SQLITE3 = false; then
232     HAVE_SQLITE3=0;
233 schoenebeck 714 echo "no, support for instrument DB will be disabled!"
234 senkov 397 else
235     HAVE_SQLITE3=1
236 schoenebeck 714 echo "yes"
237 senkov 397 fi
238     AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
239     AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you have SQLITE3 installed.])
240 schoenebeck 31
241 schoenebeck 291 if test "$have_midi_input_driver" = "false"; then
242 schoenebeck 288 echo "No supported MIDI input system found!"
243 schoenebeck 609 echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
244     echo "ALSA, MIDIShare, CoreMIDI."
245     echo "If you think you have one of those available on your system, make sure you"
246     echo "also have the respective development (header) files installed."
247 schoenebeck 288 exit -1;
248     fi
249 schoenebeck 291 if test "$have_audio_output_driver" = "false"; then
250 schoenebeck 288 echo "No supported audio output system found!"
251     echo "Sorry, LinuxSampler only supports ALSA and JACK as audio output driver at the moment!"
252     exit -1;
253     fi
254    
255    
256 schoenebeck 554 ###########################################################################
257     # Handle Configuration Options
258    
259     # TODO: should we use AC_ARG_VAR(variable, description) instead?
260    
261 schoenebeck 617 AC_ARG_ENABLE(asm,
262 schoenebeck 738 [ --enable-asm
263     Enable hand-crafted assembly optimizations
264     (default=off). LinuxSampler provides CPU specific
265 schoenebeck 617 assembly optimizations for the most important
266 schoenebeck 738 synthesis algorithms. This is currently disabled
267     by default since current asm code is broken.],
268     [config_asm="yes"],
269     [config_asm="no"]
270 schoenebeck 617 )
271     if test "$config_asm" = "yes"; then
272     AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable hand-crafted asm optimizations.])
273     fi
274    
275 schoenebeck 554 AC_ARG_ENABLE(dev-mode,
276 schoenebeck 738 [ --disable-dev-mode
277     Disable development mode (default=on). In that mode
278 schoenebeck 554 we do some extra sanity checks here and there.
279     This helps to spot possible problems, but reduces
280     efficiency a bit],
281 schoenebeck 738 [config_dev_mode="no"],
282     [config_dev_mode="yes"]
283 schoenebeck 554 )
284     if test "$config_dev_mode" = "yes"; then
285     AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
286     fi
287    
288     AC_ARG_ENABLE(debug-level,
289     [ --enable-debug-level
290     Specify verbosity of console messages (default=1).
291     The higher the value, the higher will be verbosity.
292     A value of 0 means no console output at all.
293     There's not really an upper limit but the usual
294     level of all messages is currently somewhere less
295     than 10.],
296     [config_debug_level="${enableval}"],
297     [config_debug_level="1"]
298     )
299     AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
300    
301     AC_ARG_ENABLE(rt-exceptions,
302     [ --enable-rt-exceptions
303     Enable exceptions in the realtime thread
304     (default=no). If this is enabled, exceptions will
305     be thrown on critical errors in the realtime
306     context as well. Otherwise if disabled
307     segmentation faults will be forced by the
308     application on critical errors.],
309     [config_rt_exceptions="yes"],
310     [config_rt_exceptions="no"]
311     )
312     if test "$config_rt_exceptions" = "yes"; then
313     AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
314     fi
315    
316     AC_ARG_ENABLE(preload-samples,
317     [ --enable-preload-samples
318     Due to seeking and latency issues with hard drives
319     we have to cache a small part of samples' head in
320     RAM (default=32768). The higher this value the
321     more memory will be occupied for each sample, but
322     the safer this will be in regards of possible
323     droputs. A 'good' value depends on the running
324     system and usage dependant factors.],
325     [config_preload_samples="${enableval}"],
326     [config_preload_samples="32768"]
327     )
328     AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
329    
330     AC_ARG_ENABLE(max-pitch,
331     [ --enable-max-pitch
332     Specify the maximum allowed pitch value in octaves
333     (default=4). To lower memory usage you might want
334     set a smaller value.],
335     [config_max_pitch="${enableval}"],
336     [config_max_pitch="4"]
337     )
338     AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
339    
340     AC_ARG_ENABLE(max-events,
341     [ --enable-max-events
342     Specify the maximum allowed amount of events to be
343     processed per fragment (default=1024).],
344     [config_max_events="${enableval}"],
345     [config_max_events="1024"]
346     )
347     AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
348    
349     AC_ARG_ENABLE(eg-bottom,
350     [ --enable-eg-bottom
351     Bottom limit of envelope generators
352     (default=0.001). Certain kinds of curve types like
353     exponential curves converge against 0 but never
354     reach 0. So we have to define a certain low value
355     after which we should consider all smaller values
356     to be 'almost zero'. The smaller this value, the
357     longer will voices survive in EG's release stage
358     and thus waste voices. If this value is too high
359     will cause click sounds though.],
360     [config_eg_bottom="${enableval}"],
361     [config_eg_bottom="0.001"]
362     )
363     AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
364    
365     AC_ARG_ENABLE(eg-min-release-time,
366     [ --enable-eg-min-release-time
367     Specify the lowest allowed release time in seconds
368     (default=0.0025). This value will also be used to
369     ramp down voices on voice stealing. This value
370     should always be less than the period time of the
371     used audio driver, as in case of voice stealing
372     the killed voice needs to be completely ramped
373     down in the same fragment.],
374     [config_eg_min_release_time="${enableval}"],
375     [config_eg_min_release_time="0.0025"]
376     )
377     AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
378    
379     AC_ARG_ENABLE(refill-streams,
380     [ --enable-refill-streams
381     Number of streams that should be refilled in each
382     disk thread cycle (default=4).],
383     [config_refill_streams="${enableval}"],
384     [config_refill_streams="4"]
385     )
386     AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
387    
388     AC_ARG_ENABLE(stream-min-refill,
389     [ --enable-stream-min-refill
390     Minimum refill size for disk streams (default=1024).
391     The disk thread will go to sleep for a while if no
392     stream had to be refilled more than this value in
393     a disk thread cycle.],
394     [config_stream_min_refill="${enableval}"],
395     [config_stream_min_refill="1024"]
396     )
397     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
398    
399     AC_ARG_ENABLE(stream-max-refill,
400     [ --enable-stream-max-refill
401     Maximum refill size for disk streams
402     (default=65536). The disk thread will refill
403     each stream only by a size of this value per
404     disk thread cycle.],
405     [config_stream_max_refill="${enableval}"],
406     [config_stream_max_refill="65536"]
407     )
408     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
409    
410     AC_ARG_ENABLE(stream-size,
411     [ --enable-stream-size
412     Size of each stream's ring buffer in sample points
413     (default=262144).],
414     [config_stream_size="${enableval}"],
415     [config_stream_size="262144"]
416     )
417     AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
418    
419     AC_ARG_ENABLE(max-streams,
420     [ --enable-max-streams
421     Maximum amount of disk streams (default=90). This
422     value should always be higher than the maximum
423     amount of voices.],
424     [config_max_streams="${enableval}"],
425     [config_max_streams="90"]
426     )
427     AC_DEFINE_UNQUOTED(CONFIG_MAX_STREAMS, $config_max_streams, [Define max. streams.])
428    
429     AC_ARG_ENABLE(max-voices,
430     [ --enable-max-voices
431     Maximum amount of voices (default=64). This value
432     should always be lower than the maximum amount of
433     disk streams.],
434     [config_max_voices="${enableval}"],
435     [config_max_voices="64"]
436     )
437     AC_DEFINE_UNQUOTED(CONFIG_MAX_VOICES, $config_max_voices, [Define max. voices.])
438    
439 schoenebeck 738 AC_ARG_ENABLE(subfragment-size,
440     [ --enable-subfragment-size
441     Every audio fragment will be splitted into
442     subfragments. Where each subfragment renders
443     audio with constant synthesis parameters. This is
444     done for efficiency reasons. This parameter
445     defines the default size of a subfragment in
446     sample points. A large value means less CPU time
447     whereas a low value means better audio quality
448     (default=32).],
449     [config_subfragment_size="${enableval}"],
450     [config_subfragment_size="32"]
451     )
452     AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
453    
454 schoenebeck 554 AC_ARG_ENABLE(voice-steal-algo,
455     [ --enable-voice-steal-algo
456     Voice stealing algorithm to be used. Currently
457     available options:
458     none:
459     Disable voice stealing completely.
460 schoenebeck 563 oldestvoiceonkey (default):
461 schoenebeck 554 Try to kill a voice on the same key first,
462     if no success, proceed with the oldest key.
463 schoenebeck 563 oldestkey:
464 schoenebeck 554 Try to kill a voice from the oldest active
465     key.],
466     [ if test ! "(" "${enableval}" = "none" \
467     -o "${enableval}" = "oldestvoiceonkey" \
468     -o "${enableval}" = "oldestkey" ")" ; then
469     AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
470     else
471     config_voice_steal_algo="${enableval}"
472 schoenebeck 579 fi
473 schoenebeck 554 ],
474 schoenebeck 563 [config_voice_steal_algo="oldestvoiceonkey"]
475 schoenebeck 554 )
476     AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
477    
478     AC_ARG_ENABLE(sysex-buffer-size,
479     [ --enable-sysex-buffer-size
480     System Exclusive Message buffer size in kB
481     (default=2048).],
482     [config_sysex_buffer_size="${enableval}"],
483     [config_sysex_buffer_size="2048"]
484     )
485     AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
486    
487     AC_ARG_ENABLE(force-filter,
488     [ --enable-force-filter
489     If enabled will force filter to be used even if
490     no usage was define in instrument patch files.
491     (default=no).],
492     [config_force_filter="yes"],
493     [config_force_filter="no"]
494     )
495     if test "$config_force_filter" = "yes"; then
496     AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
497     fi
498    
499     AC_ARG_ENABLE(filter-cutoff-min,
500     [ --enable-filter-cutoff-min
501     Minimum filter cutoff frequency in Hz
502     (default=100.0).],
503     [config_filter_cutoff_min="${enableval}"],
504     [config_filter_cutoff_min="100.0"]
505     )
506     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
507    
508     AC_ARG_ENABLE(filter-cutoff-max,
509     [ --enable-filter-cutoff-max
510     Maximum filter cutoff frequency in Hz
511     (default=10000.0).],
512     [config_filter_cutoff_max="${enableval}"],
513     [config_filter_cutoff_max="10000.0"]
514     )
515     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
516    
517     AC_ARG_ENABLE(override-cutoff-ctrl,
518     [ --enable-override-cutoff-ctrl
519     Override filter cutoff MIDI controller (default=no).
520     Note: you have to define the MIDI controller number
521     here, it's not a boolean parameter type! If this
522     option is used, controller number given by
523     instrument patch will be ignored and instead this
524     supplied value will be used.],
525     [config_override_cutoff_ctrl="${enableval}"],
526     [config_override_cutoff_ctrl="no"]
527     )
528     if test ! "$config_override_cutoff_ctrl" = "no"; then
529     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
530     fi
531    
532     AC_ARG_ENABLE(override-resonance-ctrl,
533     [ --enable-override-resonance-ctrl
534     Override filter resonance MIDI controller
535     (default=no). Note: you have to define the MIDI
536     controller number here, it's not a boolean
537     parameter type! If this option is used, controller
538     number given by instrument patch will be ignored
539     and instead this supplied value will be used.],
540     [config_override_resonance_ctrl="${enableval}"],
541     [config_override_resonance_ctrl="no"]
542     )
543     if test ! "$config_override_resonance_ctrl" = "no"; then
544     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
545     fi
546    
547     AC_ARG_ENABLE(override-filter-type,
548     [ --enable-override-filter-type
549     Override filter type (default=no). Options:
550     hp: for highpass
551     bp: for bandpass
552     br: for bandreject
553     lp: for lowpass
554     lpt: for lowpass turbo],
555     [ if test "${enableval}" = "hp" ; then
556     config_override_filter_type="::gig::vcf_type_highpass"
557     elif test "${enableval}" = "bp" ; then
558     config_override_filter_type="::gig::vcf_type_bandpass"
559     elif test "${enableval}" = "br" ; then
560     config_override_filter_type="::gig::vcf_type_bandreject"
561     elif test "${enableval}" = "lp" ; then
562     config_override_filter_type="::gig::vcf_type_lowpass"
563     elif test "${enableval}" = "lpt" ; then
564     config_override_filter_type="::gig::vcf_type_lowpassturbo"
565     elif test ! "${enableval}" = "no"; then
566     AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
567 schoenebeck 579 fi
568 schoenebeck 554 ],
569     [config_override_filter_type="no"]
570     )
571     if test ! "$config_override_filter_type" = "no"; then
572     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
573     fi
574    
575 schoenebeck 563 AC_ARG_ENABLE(gs-checksum,
576     [ --enable-gs-checksum
577     Enable Roland General Synth SysEx checksum check
578     (default=no). If this is enabled, all GS SysEx
579     messages which do not provide a correct checksum
580     will be ignored. This is disabled by default as
581     not all devices honor GS checksums.],
582     [config_assert_gs_sysex_checksum="yes"],
583     [config_assert_gs_sysex_checksum="no"]
584     )
585     if test "config_assert_gs_sysex_checksum" = "yes"; then
586     AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
587     fi
588    
589 schoenebeck 714 AC_ARG_ENABLE(signed-triang-algo,
590     [ --enable-signed-triang-algo
591     Signed triangular wave algorithm to be used (e.g. for LFOs).
592     Currently available options:
593     intmath:
594     Uses integer math without any branch will then be
595     converted to floating point value for each sample point.
596     This int->float conversion might hurt on some systems.
597 senkov 720 intmathabs:
598     Similar to intmath but uses abs() function.
599     Depending on compiler and platrofm this could
600     perform better than integer math as it avoids
601     an extra integer multiply instruction.
602    
603 schoenebeck 714 diharmonic:
604     The triangular wave will be approximated by adding two
605     sinusoidials. This solution might especially hurt on
606     systems with weak floating point unit.
607     benchmark (default):
608     This is not an algorithm. Use this option if the
609     appropriate algorithm should be automatically
610     chosen by the configure script by performing a
611     benchmark between the algorithms mentioned above.
612     This will NOT work for cross compilation!],
613     [ if test ! "(" "${enableval}" = "intmath" \
614 senkov 720 -o "${enableval}" = "intmathabs" \
615 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
616     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
617     else
618     config_signed_triang_algo="${enableval}"
619     fi
620     ],
621     [config_signed_triang_algo="benchmark"]
622     )
623 schoenebeck 563
624 schoenebeck 714 AC_ARG_ENABLE(unsigned-triang-algo,
625     [ --enable-unsigned-triang-algo
626     Unsigned triangular wave algorithm to be used (e.g. for LFOs).
627     Currently available options:
628     intmath:
629     Uses integer math without any branch will then be
630     converted to floating point value for each sample point.
631     This int->float conversion might hurt on some systems.
632 senkov 720 intmathabs:
633     Similar to intmath but uses abs() function.
634     Depending on compiler and platrofm this could
635     perform better than integer math as it avoids
636     an extra integer multiply instruction.
637    
638 schoenebeck 714 diharmonic:
639     The triangular wave will be approximated by adding two
640     sinusoidials. This solution might especially hurt on
641     systems with weak floating point unit.
642     benchmark (default):
643     This is not an algorithm. Use this option if the
644     appropriate algorithm should be automatically
645     chosen by the configure script by performing a
646     benchmark between the algorithms mentioned above.
647     This will NOT work for cross compilation!],
648     [ if test ! "(" "${enableval}" = "intmath" \
649 senkov 720 -o "${enableval}" = "intmathabs" \
650 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
651     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
652     else
653     config_unsigned_triang_algo="${enableval}"
654     fi
655     ],
656     [config_unsigned_triang_algo="benchmark"]
657     )
658    
659 iliev 716 AC_ARG_ENABLE(process-muted-channels,
660     [ --enable-process-muted-channels
661     Enable processing of muted channels (default=no).
662     In that mode all MIDI events in the muted channels
663     will be processed. This will provide information
664     about the active voices in the muted channels and
665     will not discard notes, triggered in mute mode,
666     when the channel is unmuted. But also will reduce
667     the efficiency.],
668     [config_process_muted_channels="yes"],
669     [config_process_muted_channels="no"]
670     )
671     if test "$config_process_muted_channels" = "yes"; then
672     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
673     fi
674 schoenebeck 714
675 iliev 716
676 schoenebeck 554 ###########################################################################
677 schoenebeck 714 # Automatic Benchmarks (to detect the best algorithms for the system)
678    
679     AC_LANG_SAVE
680    
681     if test "$config_signed_triang_algo" = "benchmark"; then
682     echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
683     AC_LANG_CPLUSPLUS
684     AC_TRY_RUN([
685     #define SIGNED 1
686     #define SILENT 1
687 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
688 schoenebeck 714 ],
689     triang_signed=0,
690     triang_signed=$?,
691     triang_signed=0
692     )
693     if test "$triang_signed" = "2"; then
694     config_signed_triang_algo="intmath"
695     echo "integer math"
696     elif test "$triang_signed" = "3"; then
697     config_signed_triang_algo="diharmonic"
698     echo "di harmonics"
699 senkov 720 elif test "$triang_signed" = "5"; then
700     config_signed_triang_algo="intmathabs"
701     echo "integer math using abs()"
702 schoenebeck 714 else
703     echo "Benchmark of signed triangular wave algorithms failed!"
704     echo "Maybe you are doing cross compilation? In that case you have to select"
705     echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
706     echo "Call './configure --help' for further information or read configure.in."
707     exit -1;
708     fi
709     fi
710 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
711 schoenebeck 714
712     if test "$config_unsigned_triang_algo" = "benchmark"; then
713     echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
714     AC_LANG_CPLUSPLUS
715     AC_TRY_RUN([
716     #define SIGNED 0
717     #define SILENT 1
718 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
719 schoenebeck 714 ],
720     triang_unsigned=0,
721     triang_unsigned=$?,
722     triang_unsigned=0
723     )
724     if test "$triang_unsigned" = "2"; then
725     config_unsigned_triang_algo="intmath"
726     echo "integer math"
727     elif test "$triang_unsigned" = "3"; then
728     config_unsigned_triang_algo="diharmonic"
729     echo "di harmonics"
730 senkov 720 elif test "$triang_unsigned" = "5"; then
731 schoenebeck 726 config_unsigned_triang_algo="intmathabs"
732 senkov 720 echo "integer math using abs()"
733 schoenebeck 714 else
734     echo "Benchmark of unsigned triangular wave algorithms failed!"
735     echo "Maybe you are doing cross compilation? In that case you have to select"
736     echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
737     echo "Call './configure --help' for further information or read configure.in."
738     exit -1;
739     fi
740     fi
741 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
742 schoenebeck 714
743     AC_LANG_RESTORE
744    
745    
746     ###########################################################################
747 schoenebeck 554 # Create Build Files
748    
749 schoenebeck 9 AM_CONFIG_HEADER(config.h)
750 schoenebeck 697 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
751 schoenebeck 9
752     AC_LANG_CPLUSPLUS
753     AC_PROG_CXX
754 persson 497
755 persson 685 # some gcc 4.0 versions need -msse for SSE register allocations
756     if test "$config_asm" = "yes"; then
757     if test "$def_arch_x86" = 1; then
758     CXXFLAGS="$CXXFLAGS -msse"
759     fi
760     fi
761    
762 persson 497 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
763     # this, the dlfcn.h check in am_prog_libtool may fail.
764     AC_CHECK_HEADER(stdlib.h)
765    
766 schoenebeck 654 AC_OUTPUT( \
767     Makefile \
768     man/Makefile \
769     man/linuxsampler.1 \
770     src/Makefile \
771     src/network/Makefile \
772     src/engines/Makefile \
773     src/engines/gig/Makefile \
774     src/engines/common/Makefile \
775     src/common/Makefile src/lib/Makefile \
776     src/lib/fileloader/Makefile \
777     src/lib/fileloader/libgig/Makefile \
778     src/testcases/Makefile \
779     src/drivers/Makefile \
780     src/drivers/audio/Makefile \
781     src/drivers/midi/Makefile \
782     linuxsampler.spec \
783     debian/Makefile \
784     Artwork/Makefile \
785     scripts/Makefile \
786     osx/Makefile \
787     osx/LinuxSampler.xcode/Makefile \
788     Documentation/Makefile \
789     Documentation/Engines/Makefile \
790     Documentation/Engines/gig/Makefile \
791 schoenebeck 697 linuxsampler.pc \
792     Doxyfile \
793 schoenebeck 654 )
794 schoenebeck 554
795    
796     ###########################################################################
797     # Output All Configuration Options
798    
799     echo ""
800     echo "#####################################################################"
801     echo "# LinuxSampler Configuration #"
802     echo "#-------------------------------------------------------------------#"
803 schoenebeck 617 echo "# Assembly Optimizations: ${config_asm}"
804 schoenebeck 554 echo "# Development Mode: ${config_dev_mode}"
805     echo "# Debug Level: ${config_debug_level}"
806     echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
807     echo "# Preload Samples: ${config_preload_samples}"
808     echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
809     echo "# Maximum Events: ${config_max_events}"
810     echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
811     echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
812     echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
813     echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
814     echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
815     echo "# Stream Size: ${config_stream_size}"
816     echo "# Maximum Disk Streams: ${config_max_streams}"
817     echo "# Maximum Voices: ${config_max_voices}"
818 schoenebeck 738 echo "# Default Subfragment Size: ${config_subfragment_size}"
819 schoenebeck 563 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
820 schoenebeck 714 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
821     echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
822 schoenebeck 554 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
823     echo "# Force Filter Usage: ${config_force_filter}"
824     echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
825     echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
826     echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
827     echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
828     echo "# Override Filter Type: ${config_override_filter_type}"
829 schoenebeck 563 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
830 iliev 716 echo "# Process Muted Channels: ${config_process_muted_channels}"
831 schoenebeck 554 echo "#-------------------------------------------------------------------#"
832     echo "# Read './configure --help' or file 'configure.in' for details. #"
833     echo "#####################################################################"
834     echo ""
835     echo "Good. Now type 'make' to compile, followed by 'make install' as root."
836     echo ""

  ViewVC Help
Powered by ViewVC