--- linuxsampler/trunk/configure.in 2007/09/04 01:12:49 1321 +++ linuxsampler/trunk/configure.in 2007/10/19 17:52:15 1454 @@ -4,8 +4,8 @@ # LinuxSampler's / liblinuxsampler's "official" release version: LINUXSAMPLER_RELEASE_MAJOR=0 -LINUXSAMPLER_RELEASE_MINOR=4 -LINUXSAMPLER_RELEASE_BUILD=0.7cvs +LINUXSAMPLER_RELEASE_MINOR=5 +LINUXSAMPLER_RELEASE_BUILD=0 #------------------------------------------------------------------------------------ # The following is the libtool / shared library version. This doesn't have to @@ -24,7 +24,7 @@ # 6. If any interfaces have been removed since the last public release, then set age # to 0. -LIBLINUXSAMPLER_LT_CURRENT=0 +LIBLINUXSAMPLER_LT_CURRENT=1 LIBLINUXSAMPLER_LT_REVISION=0 LIBLINUXSAMPLER_LT_AGE=0 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE" @@ -114,6 +114,45 @@ # check for AC_CHECK_HEADERS(features.h) +# test for POSIX thread library +m4_ifdef([m4_include(m4/pthread.m4)],, + [sinclude([m4/pthread.m4])]) +ACX_PTHREAD +LIBS="$PTHREAD_LIBS $LIBS" +CFLAGS="$CFLAGS $PTHREAD_CFLAGS" +CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS" +CC="$PTHREAD_CC" + +# check for a bug in NPTL-enabled glibc +# (see Gentoo bug report #194076) +AC_ARG_ENABLE(nptl-bug-check, + [ --disable-nptl-bug-check + Disable check for a bug in certain NPTL-enabled + glibc versions that caused crashs.], + [config_check_nptl_bug="$enableval"], + [config_check_nptl_bug="yes"] +) +if test "$config_check_nptl_bug" = "yes"; then + m4_ifdef([m4_include(m4/nptl_bug.m4)],, + [sinclude([m4/nptl_bug.m4])]) + ACX_NPTL_GLIBC_BUG([ + echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" + echo "You seem to have a buggy PTHREAD library! LinuxSampler would" + echo "probably crash due to this. Please report us the system you are" + echo "using and/or file a bug report to the bug tracking system of" + echo "your distribution." + echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as" + echo "well, you can try to circumvent this problem for now by setting" + echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which" + echo "should cause this test to pass." + echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" + AC_MSG_ERROR([possibly NPTL glibc bug detected]) + ]) +else + echo "NPTL glibc bug check disabled" +fi + + ########################################################################### # Checks for available audio and MIDI systems / drivers @@ -127,7 +166,7 @@ [ --disable-alsa-driver Disable support for the Advanced Linux Sound Architecture (ALSA).], - [config_alsa_driver="no"], + [config_alsa_driver="$enableval"], [config_alsa_driver="yes"] ) have_alsa=0 @@ -207,7 +246,7 @@ [ --disable-jack-driver Disable support for the Jack Audio Connection Kit (JACK).], - [config_jack_driver="no"], + [config_jack_driver="$enableval"], [config_jack_driver="yes"] ) have_jack=0 @@ -230,7 +269,7 @@ [ --disable-arts-driver Disable support for the Analogue Realtime System (aRts).], - [config_arts_driver="no"], + [config_arts_driver="$enableval"], [config_arts_driver="yes"] ) have_arts=0 @@ -251,7 +290,7 @@ AC_ARG_ENABLE(midishare-driver, [ --disable-midishare-driver Disable support for the MidiShare system.], - [config_midishare_driver="no"], + [config_midishare_driver="$enableval"], [config_midishare_driver="yes"] ) have_midishare=0 @@ -277,7 +316,7 @@ AC_ARG_ENABLE(coremidi-driver, [ --disable-coremidi-driver Disable support for the Apple CoreMIDI system.], - [config_coremidi_driver="no"], + [config_coremidi_driver="$enableval"], [config_coremidi_driver="yes"] ) have_coremidi=0 @@ -295,8 +334,29 @@ AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1") AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.]) +# have we found at least one MIDI input and one audio output driver ? +if test "$have_midi_input_driver" = "false"; then + echo "No supported MIDI input system found!" + echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:" + echo "ALSA, MIDIShare, CoreMIDI." + echo "If you think you have one of those available on your system, make sure you" + echo "also have the respective development (header) files installed." + exit -1; +fi +if test "$have_audio_output_driver" = "false"; then + echo "No supported audio output system found!" + echo "Sorry, LinuxSampler only supports ALSA, JACK and ARTS as audio output" + echo "driver at the moment!" + exit -1; +fi + + + +########################################################################### +# Checks for various DLL libraries + # Check presence of libgig -libgig_version="3.1.1" +libgig_version="3.2.0" PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false) if test "$HAVE_GIG" = "false"; then echo "Required libgig version not found!" @@ -308,38 +368,38 @@ AC_SUBST(GIG_CFLAGS) AC_SUBST(GIG_LIBS) -# Check presence of sqlite3 -sqlite_version="3.3" -PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false) -AC_SUBST(SQLITE3_LIBS) -AC_SUBST(SQLITE3_CFLAGS) -if test $HAVE_SQLITE3 = false; then - HAVE_SQLITE3=0; - instruments_db_support="no" - echo "*** Required sqlite version not found!" - echo "*** You need to have sqlite version ${sqlite_version} or higher" - echo "*** for instruments database support to be enabled." - echo "*** Support for instruments DB will be disabled!" +# Instruments DB feature (requires SQLite 3.3) +AC_ARG_ENABLE(instruments-db, + [ --disable-instruments-db + Disable compilation of the sampler's instruments + database feature. You need to have SQLite 3.3 + or younger installed for this feature.], + [config_instruments_db="$enableval"], + [config_instruments_db="yes"] +) +HAVE_SQLITE3=0; +if test "$config_instruments_db" = "yes"; then + # Check presence of sqlite3 + sqlite_version="3.3" + PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false) + AC_SUBST(SQLITE3_LIBS) + AC_SUBST(SQLITE3_CFLAGS) + if test $HAVE_SQLITE3 = false; then + HAVE_SQLITE3=0 + config_instruments_db="no" + echo "*** Required sqlite version not found!" + echo "*** You need to have sqlite version ${sqlite_version} or higher" + echo "*** for instruments database support to be enabled." + echo "*** Support for instruments DB will be disabled!" + else + HAVE_SQLITE3=1 + fi else - HAVE_SQLITE3=1 - instruments_db_support="yes" + echo "Instruments DB feature disabled by configure script parameter" fi AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1) -AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you have SQLITE3 installed.]) +AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.]) -if test "$have_midi_input_driver" = "false"; then - echo "No supported MIDI input system found!" - echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:" - echo "ALSA, MIDIShare, CoreMIDI." - echo "If you think you have one of those available on your system, make sure you" - echo "also have the respective development (header) files installed." - exit -1; -fi -if test "$have_audio_output_driver" = "false"; then - echo "No supported audio output system found!" - echo "Sorry, LinuxSampler only supports ALSA and JACK as audio output driver at the moment!" - exit -1; -fi ########################################################################### @@ -355,7 +415,7 @@ to just enter a fast (denormal) FPU mode on x86 platforms. There are currently no synthesis core assembly optimizations anymore since LS 0.4.0], - [config_asm="no"], + [config_asm="$enableval"], [config_asm="yes"] ) if test "$config_asm" = "yes"; then @@ -363,13 +423,13 @@ fi AC_ARG_ENABLE(dev-mode, - [ --disable-dev-mode - Disable development mode (default=on). In that mode + [ --enable-dev-mode + Enable development mode (default=off). In that mode we do some extra sanity checks here and there. This helps to spot possible problems, but reduces efficiency a bit], - [config_dev_mode="no"], - [config_dev_mode="yes"] + [config_dev_mode="$enableval"], + [config_dev_mode="no"] ) if test "$config_dev_mode" = "yes"; then AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.]) @@ -396,7 +456,7 @@ context as well. Otherwise if disabled segmentation faults will be forced by the application on critical errors.], - [config_rt_exceptions="yes"], + [config_rt_exceptions="$enableval"], [config_rt_exceptions="no"] ) if test "$config_rt_exceptions" = "yes"; then @@ -590,7 +650,7 @@ If enabled will force filter to be used even if no usage was define in instrument patch files. (default=no).], - [config_force_filter="yes"], + [config_force_filter="$enableval"], [config_force_filter="no"] ) if test "$config_force_filter" = "yes"; then @@ -680,7 +740,7 @@ messages which do not provide a correct checksum will be ignored. This is disabled by default as not all devices honor GS checksums.], - [config_assert_gs_sysex_checksum="yes"], + [config_assert_gs_sysex_checksum="$enableval"], [config_assert_gs_sysex_checksum="no"] ) if test "config_assert_gs_sysex_checksum" = "yes"; then @@ -726,8 +786,7 @@ Similar to intmath but uses abs() function. Depending on compiler and platrofm this could perform better than integer math as it avoids - an extra integer multiply instruction. - + an extra integer multiply instruction. diharmonic: The triangular wave will be approximated by adding two sinusoidials. This solution might especially hurt on @@ -761,8 +820,7 @@ Similar to intmath but uses abs() function. Depending on compiler and platrofm this could perform better than integer math as it avoids - an extra integer multiply instruction. - + an extra integer multiply instruction. diharmonic: The triangular wave will be approximated by adding two sinusoidials. This solution might especially hurt on @@ -793,7 +851,7 @@ will not discard notes, triggered in mute mode, when the channel is unmuted. But also will reduce the efficiency.], - [config_process_muted_channels="yes"], + [config_process_muted_channels="$enableval"], [config_process_muted_channels="no"] ) if test "$config_process_muted_channels" = "yes"; then @@ -807,7 +865,7 @@ all voices whenever it receives an All-Notes-Off MIDI message. You can disable this behavior, so that LS simply ignores such messages.], - [config_process_all_notes_off="no"], + [config_process_all_notes_off="$enableval"], [config_process_all_notes_off="yes"] ) if test "$config_process_all_notes_off" = "yes"; then @@ -821,7 +879,7 @@ generated by for example the envelope generator will be smoother, minimizing the risk for audio clicks. Disable it to reduce CPU usage.], - [config_interpolate_volume="no"], + [config_interpolate_volume="$enableval"], [config_interpolate_volume="yes"] ) if test "$config_interpolate_volume" = "yes"; then @@ -841,6 +899,23 @@ ) AC_SUBST(config_plugin_dir) +AC_ARG_ENABLE(default-instruments-db-location, + [ --enable-default-instruments-db-location + Only when instruments DB feature is enabled: file name + which shall be taken as default location of the + instruments DB file. This location can still be + overridden at runtime with a command line switch. + (default: /var/lib/linuxsampler/instruments.db)], + [config_default_instruments_db_file="${enableval}"], + [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"] +) +AC_DEFINE_UNQUOTED( + CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION, + "$config_default_instruments_db_file", + [Only when instruments DB feature is enabled: default location of the DB file.] +) +AC_SUBST(config_default_instruments_db_file) + ########################################################################### # Automatic Benchmarks (to detect the best algorithms for the system) @@ -965,6 +1040,7 @@ src/drivers/Makefile \ src/drivers/audio/Makefile \ src/drivers/midi/Makefile \ + src/plugins/Makefile \ linuxsampler.spec \ debian/Makefile \ Artwork/Makefile \ @@ -1026,7 +1102,10 @@ echo "# Process Muted Channels: ${config_process_muted_channels}" echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}" echo "# Interpolate Volume: ${config_interpolate_volume}" -echo "# Instruments database support: ${instruments_db_support}" +echo "# Instruments database support: ${config_instruments_db}" +if test "$config_instruments_db" = "yes"; then +echo "# Instruments DB default location: ${config_default_instruments_db_file}" +fi echo "# Plugin Path: ${config_plugin_dir}" echo "#-------------------------------------------------------------------#" echo "# Read './configure --help' or file 'configure.in' for details. #"