--- linuxsampler/trunk/configure.in	2008/07/10 15:00:38	1750
+++ linuxsampler/trunk/configure.in	2009/05/10 16:35:12	1899
@@ -5,7 +5,7 @@
 
 LINUXSAMPLER_RELEASE_MAJOR=0
 LINUXSAMPLER_RELEASE_MINOR=5
-LINUXSAMPLER_RELEASE_BUILD=1.6cvs
+LINUXSAMPLER_RELEASE_BUILD=1.12cvs
 
 #------------------------------------------------------------------------------------
 # The following is the libtool / shared library version. This doesn't have to
@@ -39,19 +39,14 @@
 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
 
 AC_PROG_CXX
+AC_LIBTOOL_WIN32_DLL
 AM_PROG_LIBTOOL
 
 AC_SUBST(SHLIB_VERSION_ARG)
 AC_SUBST(SHARED_VERSION_INFO)
 
 AC_C_BIGENDIAN
-AC_CANONICAL_SYSTEM
-
-AC_SUBST(target)
-AC_SUBST(target_alias)
-AC_SUBST(target_cpu)
-AC_SUBST(target_os)
-AC_SUBST(target_vendor)
+AC_CANONICAL_HOST
 
 PKG_PROG_PKG_CONFIG
 
@@ -60,8 +55,8 @@
 
 AC_MSG_CHECKING([whether x86 architecture])
 def_arch_x86=0
-case $target_cpu in
-  "i386" | "i486" | "i586" | "i686" | "i786")
+case $host_cpu in
+  "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
     echo "yes"
     def_arch_x86=1;;
   *)
@@ -73,10 +68,10 @@
 # (only if the user did not provide one)
 CXX_CPU_SWITCH=
 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
-  if test "$def_arch_x86" = 1; then
-    CXX_CPU_SWITCH="-march=$target_cpu"
+  if test "$def_arch_x86" = 1 -a "$host_cpu" != "x86_64"; then
+    CXX_CPU_SWITCH="-march=$host_cpu"
   elif test "$target_cpu" = "ppc"; then
-    CXX_CPU_SWITCH="-arch=$target_cpu"
+    CXX_CPU_SWITCH="-arch=$host_cpu"
   fi
 fi
 AC_SUBST([CXX_CPU_SWITCH])
@@ -85,7 +80,8 @@
 AC_CHECK_HEADERS(
     mmsystem.h,
     have_windows=1,
-    have_windows=0
+    have_windows=0,
+    [#include <windef.h>]
 )
 AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
 
@@ -255,6 +251,10 @@
 fi
 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
+config_have_alsa="no"
+if test $have_alsa = "1"; then
+    config_have_alsa="yes"
+fi
 
 # JACK
 AC_ARG_ENABLE(jack-driver,
@@ -281,6 +281,10 @@
 fi
 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
 AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
+config_have_jack="no"
+if test $have_jack = "1"; then
+    config_have_jack="yes"
+fi
 
 # JACK MIDI
 have_jack_midi=0
@@ -304,6 +308,10 @@
 AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
 AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
                    [Define to 1 if you have JACK with MIDI support installed.])
+config_have_jack_midi="no"
+if test $have_jack_midi = "1"; then
+    config_have_jack_midi="yes"
+fi
 
 # ARTS
 AC_ARG_ENABLE(arts-driver,
@@ -326,6 +334,10 @@
 fi
 AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
 AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
+config_have_arts="no"
+if test $have_arts = "1"; then
+    config_have_arts="yes"
+fi
 
 # ASIO AUDIO (Win32)
 AC_ARG_ENABLE(asiosdk-dir,
@@ -365,6 +377,10 @@
 AC_SUBST(ASIOSDK_BASEDIR)
 AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
 AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
+config_have_asio="no"
+if test $have_asio = "1"; then
+    config_have_asio="yes"
+fi
 
 # MidiShare (Linux, OS X, Windows)
 AC_ARG_ENABLE(midishare-driver,
@@ -391,6 +407,10 @@
 fi
 AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
 AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
+config_have_midishare="no"
+if test $have_midishare = "1"; then
+    config_have_midishare="yes"
+fi
 
 # CoreMIDI (OS X)
 AC_ARG_ENABLE(coremidi-driver,
@@ -413,6 +433,36 @@
 fi
 AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
 AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
+config_have_coremidi="no"
+if test $have_coremidi = "1"; then
+    config_have_coremidi="yes"
+fi
+
+# CoreAudio (OS X)
+AC_ARG_ENABLE(coreaudio-driver,
+  [  --disable-coreaudio-driver
+                          Disable support for the Apple CoreAudio system.],
+  [config_coreaudio_driver="$enableval"],
+  [config_coreaudio_driver="yes"]
+)
+have_coreaudio=0
+if test "$config_coreaudio_driver" = "yes"; then
+    AC_CHECK_HEADER(CoreAudio/CoreAudio.h,
+        have_coreaudio=1,
+        have_coreaudio=0
+    )
+    if test "$have_coreaudio" = "1"; then
+        have_audio_output_driver="true"
+    fi
+else
+    echo "CoreAudio support disabled by configure script parameter"
+fi
+AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1")
+AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.])
+config_have_coreaudio="no"
+if test $have_coreaudio = "1"; then
+    config_have_coreaudio="yes"
+fi
 
 # MME MIDI (Win32)
 AC_ARG_ENABLE(mmemidi-driver,
@@ -435,6 +485,47 @@
 fi
 AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
 AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
+config_have_mme="no"
+if test $have_mmemidi = "1"; then
+    config_have_mme="yes"
+fi
+
+# DSSI
+AC_CHECK_HEADERS(dssi.h,
+	config_have_dssi="yes",
+	config_have_dssi="no")
+AM_CONDITIONAL(HAVE_DSSI, test $config_have_dssi = "yes")
+
+# LV2
+PKG_CHECK_MODULES(LV2, lv2core, config_have_lv2="yes", config_have_lv2="no")
+if test $config_have_lv2 = "no"; then
+    AC_CHECK_HEADER(lv2.h, config_have_lv2="yes", config_have_lv2="no")
+fi
+AM_CONDITIONAL(HAVE_LV2, test $config_have_lv2 = "yes")
+
+# VST
+AC_ARG_ENABLE(vstsdk-dir,
+  [  --enable-vstsdk-dir
+                          Directory where the VST SDK is located.
+                          This automatically enables the compilation
+                          of the VST plugin.],
+  [VSTSDK_DIR="${enableval}"],
+  [VSTSDK_DIR=]
+)
+AC_SUBST(VSTSDK_DIR)
+AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
+config_have_vst="no"
+if test "x$VSTSDK_DIR" != "x"; then
+    config_have_vst="yes"
+fi
+
+# AU
+AC_CHECK_HEADERS(AudioUnit/AudioUnit.h,
+	config_have_au="yes",
+	config_have_au="no")
+AM_CONDITIONAL(HAVE_AU, test $config_have_au = "yes")
+AM_CONDITIONAL(HAVE_AUFLAGS, test "$AUFLAGS" != "")
+
 
 # have we found at least one MIDI input and one audio output driver ?
 if test "$have_midi_input_driver" = "false"; then
@@ -681,23 +772,25 @@
 
 AC_ARG_ENABLE(max-streams,
   [  --enable-max-streams
-                          Maximum amount of disk streams (default=90). This
-                          value should always be higher than the maximum
-                          amount of voices.],
+                          Initial maximum amount of disk streams
+                          (default=90). This value can be changed at
+                          runtime. It should always be higher than the
+                          maximum amount of voices.],
   [config_max_streams="${enableval}"],
   [config_max_streams="90"]
 )
-AC_DEFINE_UNQUOTED(CONFIG_MAX_STREAMS, $config_max_streams, [Define max. streams.])
+AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
 
 AC_ARG_ENABLE(max-voices,
   [  --enable-max-voices
-                          Maximum amount of voices (default=64). This value
-                          should always be lower than the maximum amount of
-                          disk streams.],
+                          Initial maximum amount of voices (default=64).
+                          This value can be changed at runtime. It should
+                          always be lower than the maximum amount of disk
+                          streams.],
   [config_max_voices="${enableval}"],
   [config_max_voices="64"]
 )
-AC_DEFINE_UNQUOTED(CONFIG_MAX_VOICES, $config_max_voices, [Define max. voices.])
+AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
 
 AC_ARG_ENABLE(subfragment-size,
   [  --enable-subfragment-size
@@ -999,6 +1092,22 @@
   AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
 fi
 
+AC_ARG_ENABLE(master-volume-sysex-by-port,
+  [  --enable-master-volume-sysex-by-port
+                          Whether global volume sysex message should be
+                          applied globally to the whole sampler or only to
+                          the sampler channels connected to the same MIDI
+                          input port on which the sysex message arrived on.
+                          By default global volume sysex messages apply
+                          globally to the whole sampler, since many MIDI
+                          devices behave that way.],
+  [config_master_volume_sysex_by_port="$enableval"],
+  [config_master_volume_sysex_by_port="no"]
+)
+if test "$config_master_volume_sysex_by_port" = "yes"; then
+  AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
+fi
+
 AC_ARG_ENABLE(plugin-dir,
   [  --enable-plugin-dir
                           Directory where the sampler shall look for potential plugins,
@@ -1126,13 +1235,6 @@
 
 AC_LANG_CPLUSPLUS
 
-# some gcc 4.0 versions need -msse for SSE register allocations
-if test "$config_asm" = "yes"; then
-  if test "$def_arch_x86" = 1; then
-    CXXFLAGS="$CXXFLAGS -msse"
-  fi
-fi
-
 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
 # this, the dlfcn.h check in am_prog_libtool may fail.
 AC_CHECK_HEADER(stdlib.h)
@@ -1154,6 +1256,11 @@
     src/drivers/audio/Makefile \
     src/drivers/midi/Makefile \
     src/plugins/Makefile \
+    src/hostplugins/Makefile \
+    src/hostplugins/dssi/Makefile \
+    src/hostplugins/lv2/Makefile \
+    src/hostplugins/vst/Makefile \
+    src/hostplugins/au/Makefile \
     linuxsampler.spec \
     debian/Makefile \
     Artwork/Makefile \
@@ -1181,6 +1288,9 @@
 echo "#####################################################################"
 echo "# LinuxSampler Configuration                                        #"
 echo "#-------------------------------------------------------------------#"
+echo "# Release Version: ${LINUXSAMPLER_RELEASE_MAJOR}.${LINUXSAMPLER_RELEASE_MINOR}.${LINUXSAMPLER_RELEASE_BUILD}"
+echo "# LSCP Version: ${LSCP_RELEASE_MAJOR}.${LSCP_RELEASE_MINOR}"
+echo "#-------------------------------------------------------------------"
 echo "# Assembly Optimizations: ${config_asm}"
 echo "# Development Mode: ${config_dev_mode}"
 echo "# Debug Level: ${config_debug_level}"
@@ -1194,8 +1304,8 @@
 echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
 echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
 echo "# Stream Size: ${config_stream_size}"
-echo "# Maximum Disk Streams: ${config_max_streams}"
-echo "# Maximum Voices: ${config_max_voices}"
+echo "# Default Maximum Disk Streams: ${config_max_streams}"
+echo "# Default Maximum Voices: ${config_max_voices}"
 echo "# Default Subfragment Size: ${config_subfragment_size}"
 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
@@ -1214,12 +1324,22 @@
 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
 echo "# Process Muted Channels: ${config_process_muted_channels}"
 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
+echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
 echo "# Interpolate Volume: ${config_interpolate_volume}"
 echo "# Instruments database support: ${config_instruments_db}"
 if test "$config_instruments_db" = "yes"; then
 echo "# Instruments DB default location: ${config_default_instruments_db_file}"
 fi
 echo "# Plugin Path: ${config_plugin_dir}"
+echo "#-------------------------------------------------------------------"
+echo "# MIDI Input Drivers:"
+echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack_midi}, CoreMIDI: ${config_have_coremidi}, MME: ${config_have_mme}, MidiShare: ${config_have_midishare}"
+echo "#-------------------------------------------------------------------"
+echo "# Audio Output Drivers:"
+echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack}, ARTS: ${config_have_arts}, CoreAudio: ${config_have_coreaudio}, ASIO: ${config_have_asio}"
+echo "#-------------------------------------------------------------------"
+echo "# Building sampler as plugin for following host standards:"
+echo "# DSSI: ${config_have_dssi}, LV2: ${config_have_lv2}, VST: ${config_have_vst}, AU: ${config_have_au}"
 echo "#-------------------------------------------------------------------#"
 echo "# Read './configure --help' or file 'configure.in' for details.     #"
 echo "#####################################################################"