/[svn]/linuxsampler/trunk/configure.in
ViewVC logotype

Diff of /linuxsampler/trunk/configure.in

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 685 by persson, Tue Jul 5 19:30:37 2005 UTC revision 1651 by persson, Sun Jan 27 15:07:11 2008 UTC
# Line 1  Line 1 
1  AC_INIT(configure.in)  AC_INIT(configure.in)
2    
3    #------------------------------------------------------------------------------------
4    # LinuxSampler's / liblinuxsampler's "official" release version:
5    
6    LINUXSAMPLER_RELEASE_MAJOR=0
7    LINUXSAMPLER_RELEASE_MINOR=5
8    LINUXSAMPLER_RELEASE_BUILD=1
9    
10    #------------------------------------------------------------------------------------
11    # The following is the libtool / shared library version. This doesn't have to
12    # do anything with the release version. It MUST conform to the following rules:
13    #
14    #  1. Start with version information of `0:0:0' for each libtool library.
15    #  2. Update the version information only immediately before a public release of
16    #     your software. More frequent updates are unnecessary, and only guarantee
17    #     that the current interface number gets larger faster.
18    #  3. If the library source code has changed at all since the last update, then
19    #     increment revision (`c:r:a' becomes `c:r+1:a').
20    #  4. If any interfaces have been added, removed, or changed since the last update,
21    #     increment current, and set revision to 0.
22    #  5. If any interfaces have been added since the last public release, then increment
23    #     age.
24    #  6. If any interfaces have been removed since the last public release, then set age
25    #     to 0.
26    
27    LIBLINUXSAMPLER_LT_CURRENT=2
28    LIBLINUXSAMPLER_LT_REVISION=0
29    LIBLINUXSAMPLER_LT_AGE=1
30    SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31    
32    #------------------------------------------------------------------------------------
33    # the LSCP specification version this LinuSampler release complies with:
34    
35    LSCP_RELEASE_MAJOR=1
36    LSCP_RELEASE_MINOR=3
37    
38    AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39    AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40    
41    AM_PROG_LIBTOOL
42    
43    AC_SUBST(SHLIB_VERSION_ARG)
44    AC_SUBST(SHARED_VERSION_INFO)
45    
46  AC_C_BIGENDIAN  AC_C_BIGENDIAN
47  AC_CANONICAL_SYSTEM  AC_CANONICAL_SYSTEM
48    
# Line 8  AC_SUBST(target_cpu) Line 52  AC_SUBST(target_cpu)
52  AC_SUBST(target_os)  AC_SUBST(target_os)
53  AC_SUBST(target_vendor)  AC_SUBST(target_vendor)
54    
55    PKG_PROG_PKG_CONFIG
56    
57  ###########################################################################  ###########################################################################
58  # General Checks  # General Checks
# Line 24  esac Line 69  esac
69  AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])  AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
70    
71  # determine the right gcc switch for CPU specific optimizations  # determine the right gcc switch for CPU specific optimizations
72    # (only if the user did not provide one)
73  CXX_CPU_SWITCH=  CXX_CPU_SWITCH=
74  if test "$def_arch_x86" = 1; then  if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
75    CXX_CPU_SWITCH="-march=$target_cpu"    if test "$def_arch_x86" = 1; then
76  elif test "$target_cpu" = "powerpc"; then      CXX_CPU_SWITCH="-march=$target_cpu"
77    CXX_CPU_SWITCH="-arch=$target_cpu"    elif test "$target_cpu" = "ppc"; then
78        CXX_CPU_SWITCH="-arch=$target_cpu"
79      fi
80  fi  fi
81  AC_SUBST([CXX_CPU_SWITCH])  AC_SUBST([CXX_CPU_SWITCH])
82    
83    # check if we're on MS Windows
84    AC_CHECK_HEADERS(
85        mmsystem.h,
86        have_windows=1,
87        have_windows=0
88    )
89    AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
90    
91  AC_MSG_CHECKING([whether UNIX98 compatible])  AC_MSG_CHECKING([whether UNIX98 compatible])
92  AC_LANG_SAVE  AC_LANG_SAVE
93  AC_LANG_C  AC_LANG_C
# Line 54  have_unix98="no" Line 110  have_unix98="no"
110  )  )
111  AC_LANG_RESTORE  AC_LANG_RESTORE
112  AC_MSG_RESULT([$have_unix98])  AC_MSG_RESULT([$have_unix98])
113  if test "$have_unix98" = "no"; then  if test "$have_unix98" = "no" -a "have_windows" = "0"; then
114      if test "x$HAVE_UNIX98" = "x"; then      if test "x$HAVE_UNIX98" = "x"; then
115          echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"          echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
116          echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run          echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
# Line 64  if test "$have_unix98" = "no"; then Line 120  if test "$have_unix98" = "no"; then
120      fi      fi
121  fi  fi
122    
123    # check for <features.h>
124    AC_CHECK_HEADERS(features.h)
125    
126    # test for POSIX thread library
127    m4_ifdef([m4_include(m4/pthread.m4)],,
128                 [sinclude([m4/pthread.m4])])
129    ACX_PTHREAD
130    LIBS="$PTHREAD_LIBS $LIBS"
131    CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
132    CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
133    CC="$PTHREAD_CC"
134    
135    # check for a bug in NPTL-enabled glibc
136    # (see Gentoo bug report #194076)
137    AC_ARG_ENABLE(nptl-bug-check,
138      [  --disable-nptl-bug-check
139                              Disable check for a bug in certain NPTL-enabled
140                              glibc versions that caused crashs.],
141      [config_check_nptl_bug="$enableval"],
142      [config_check_nptl_bug="yes"]
143    )
144    if test "$config_check_nptl_bug" = "yes"; then
145        m4_ifdef([m4_include(m4/nptl_bug.m4)],,
146                 [sinclude([m4/nptl_bug.m4])])
147        ACX_NPTL_GLIBC_BUG([
148            echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
149            echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
150            echo "probably crash due to this. Please report us the system you are"
151            echo "using and/or file a bug report to the bug tracking system of"
152            echo "your distribution."
153            echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
154            echo "well, you can try to circumvent this problem for now by setting"
155            echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
156            echo "should cause this test to pass."
157            echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
158            AC_MSG_ERROR([possibly NPTL glibc bug detected])
159        ])
160    else
161        echo "NPTL glibc bug check disabled"
162    fi
163    
164    
165    
166    ###########################################################################
167  # Checks for available audio and MIDI systems / drivers  # Checks for available audio and MIDI systems / drivers
168  # (we throw an error if there's not at least one system for audio output and MIDI input available)  # (we throw an error if there's not at least one system for audio output and MIDI input available)
169    
170  have_midi_input_driver="false"  have_midi_input_driver="false"
171  have_audio_output_driver="false"  have_audio_output_driver="false"
172    
173  AC_CHECK_HEADER(alsa/asoundlib.h,  # ALSA
174      AC_CHECK_LIB(asound, main,  AC_ARG_ENABLE(alsa-driver,
175                               have_alsa=1    [  --disable-alsa-driver
176                               ,                            Disable support for the Advanced Linux Sound
177                               have_alsa=0                            Architecture (ALSA).],
178                  )    [config_alsa_driver="$enableval"],
179                  ,    [config_alsa_driver="yes"]
180                  have_alsa=0  )
181  )  have_alsa=0
182  if test "$have_alsa" = "1"; then  if test "$config_alsa_driver" = "yes"; then
183      have_midi_input_driver="true"      AC_CHECK_HEADER(alsa/asoundlib.h,
184      have_audio_output_driver="true";          AC_CHECK_LIB(asound, main,
185                                     have_alsa=1
186                                     ,
187                                     have_alsa=0
188                        )
189                        ,
190                        have_alsa=0
191        )
192        if test "$have_alsa" = "1"; then
193            have_midi_input_driver="true"
194            have_audio_output_driver="true";
195        fi
196    
197        echo -n "checking Alsa version... "
198        AC_LANG_SAVE
199        AC_LANG_C
200        AC_TRY_RUN([
201            #include <alsa/asoundlib.h>
202            void main(void) {
203                /* ensure backward compatibility */
204                #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
205                #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
206                #endif
207                exit(SND_LIB_MAJOR);
208            }
209        ],
210        alsa_major=0,
211        alsa_major=$?,
212        alsa_major=0
213        )
214        AC_TRY_RUN([
215            #include <alsa/asoundlib.h>
216            void main(void) {
217                /* ensure backward compatibility */
218                #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
219                #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
220                #endif
221                exit(SND_LIB_MINOR);
222            }
223        ],
224        alsa_minor=0,
225        alsa_minor=$?,
226        alsa_minor=0
227        )
228        AC_TRY_RUN([
229            #include <alsa/asoundlib.h>
230            void main(void) {
231                /* ensure backward compatibility */
232                #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
233                #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
234                #endif
235                exit(SND_LIB_SUBMINOR);
236            }
237        ],
238        alsa_subminor=0,
239        alsa_subminor=$?,
240        alsa_subminor=0
241        )
242        AC_LANG_RESTORE
243        echo "$alsa_major.$alsa_minor.$alsa_subminor";
244        AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
245        AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
246        AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
247    else
248        echo "ALSA support disabled by configure script parameter"
249  fi  fi
250  AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")  AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
251  AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])  AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
252    
 echo -n "checking Alsa version... "  
 AC_LANG_SAVE  
 AC_LANG_C  
 AC_TRY_RUN([  
 #include <alsa/asoundlib.h>  
 void main(void) {  
 /* ensure backward compatibility */  
 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)  
 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR  
 #endif  
 exit(SND_LIB_MAJOR);  
 }  
 ],  
 alsa_major=0,  
 alsa_major=$?,  
 alsa_major=0  
 )  
 AC_TRY_RUN([  
 #include <alsa/asoundlib.h>  
 void main(void) {  
 /* ensure backward compatibility */  
 #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)  
 #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR  
 #endif  
 exit(SND_LIB_MINOR);  
 }  
 ],  
 alsa_minor=0,  
 alsa_minor=$?,  
 alsa_minor=0  
 )  
 AC_TRY_RUN([  
 #include <alsa/asoundlib.h>  
 void main(void) {  
 /* ensure backward compatibility */  
 #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)  
 #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR  
 #endif  
 exit(SND_LIB_SUBMINOR);  
 }  
 ],  
 alsa_subminor=0,  
 alsa_subminor=$?,  
 alsa_subminor=0  
 )  
 AC_LANG_RESTORE  
 echo "$alsa_major.$alsa_minor.$alsa_subminor";  
 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])  
 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])  
 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])  
   
253  # JACK  # JACK
254  PKG_CHECK_MODULES(JACK, jack, HAVE_JACK=true, HAVE_JACK=false)  AC_ARG_ENABLE(jack-driver,
255  AC_SUBST(JACK_LIBS)    [  --disable-jack-driver
256  AC_SUBST(JACK_CFLAGS)                            Disable support for the Jack Audio Connection Kit
257  if test $HAVE_JACK = false; then                            (JACK).],
258      HAVE_JACK=0;    [config_jack_driver="$enableval"],
259  else    [config_jack_driver="yes"]
260      HAVE_JACK=1  )
261      have_audio_output_driver="true";  have_jack=0
262      AC_CHECK_LIB(jack, jack_client_name_size, [AC_DEFINE(HAVE_JACK_CLIENT_NAME_SIZE, 1, [Define to 1 if you have the `jack_client_name_size' function.])], , $JACK_LIBS)  if test "$config_jack_driver" = "yes"; then
263        PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
264        if test $have_jack = "1"; then
265            AC_SUBST(JACK_LIBS)
266            AC_SUBST(JACK_CFLAGS)
267            AC_CHECK_LIB(jack, jack_client_name_size, [AC_DEFINE(HAVE_JACK_CLIENT_NAME_SIZE, 1, [Define to 1 if you have the `jack_client_name_size' function.])], , $JACK_LIBS)
268            have_audio_output_driver="true";
269        fi
270    else
271        echo "JACK support disabled by configure script parameter"
272  fi  fi
273  AM_CONDITIONAL(HAVE_JACK, test $HAVE_JACK = 1)  AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
274  AC_DEFINE_UNQUOTED(HAVE_JACK,$HAVE_JACK,[Define to 1 if you have JACK installed.])  AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
275    
276    # JACK MIDI
277    have_jack_midi=0
278    if test $have_jack = "1"; then
279       linuxsampler_save_CFLAGS=$CFLAGS
280       linuxsampler_save_LIBS=$LIBS
281       CFLAGS="$JACK_CFLAGS $CFLAGS"
282       LIBS="$JACK_LIBS $LIBS"
283       AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
284       if test $have_jack_midi = "1"; then
285         AC_CHECK_FUNCS(jack_midi_get_event_count)
286         AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
287             jack_midi_clear_buffer(0, 0);
288         ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
289                 [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
290       fi
291       CFLAGS=$linuxsampler_save_CFLAGS
292       LIBS=$linuxsampler_save_LIBS
293    fi
294    AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
295    AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
296                       [Define to 1 if you have JACK with MIDI support installed.])
297    
298    # ARTS
299    AC_ARG_ENABLE(arts-driver,
300      [  --disable-arts-driver
301                              Disable support for the Analogue Realtime System
302                              (aRts).],
303      [config_arts_driver="$enableval"],
304      [config_arts_driver="yes"]
305    )
306    have_arts=0
307    if test "$config_arts_driver" = "yes"; then
308        m4_ifdef([m4_include(m4/arts.m4)],,
309                 [sinclude([m4/arts.m4])])
310        AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
311        if test "$have_arts" = "1"; then
312            have_audio_output_driver="true"
313        fi
314    else
315        echo "ARTS support disabled by configure script parameter"
316    fi
317    AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
318    AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
319    
320    # ASIO AUDIO (Win32)
321    AC_ARG_ENABLE(asiosdk-dir,
322      [  --enable-asiosdk-dir
323                              Directory where the ASIO SDK is located, this automatically
324                              enables the compilation of the ASIO audio output driver.],
325      [config_asiosdk_dir="${enableval}"],
326      [config_asiosdk_dir="."]
327    )
328    AC_SUBST(config_asiosdk_dir)
329    
330    AC_ARG_ENABLE(asio-driver,
331      [  --disable-asio-driver
332                              Disable support for the Windows ASIO driver.],
333      [config_asio_driver="$enableval"],
334      [config_asio_driver="yes"]
335    )
336    have_asio=0
337    ASIOSDK_BASEDIR=
338    if test "$config_asio_driver" = "yes"; then
339        asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
340        echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
341        if test -e $asiosdk_headerfile ; then
342            echo yes
343            have_asio=1
344            ASIOSDK_BASEDIR="$config_asiosdk_dir"
345        else
346            echo no
347            have_asio=0
348        fi
349        if test "$have_asio" = "1"; then
350            have_audio_output_driver="true"
351        fi
352    else
353        echo "Windows ASIO support disabled by configure script parameter"
354    fi
355    AC_SUBST(ASIOSDK_BASEDIR)
356    AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
357    AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
358    
359  # MidiShare (Linux, OS X, Windows)  # MidiShare (Linux, OS X, Windows)
360  AC_CHECK_HEADER(MidiShare.h,  AC_ARG_ENABLE(midishare-driver,
361      AC_CHECK_LIB(MidiShare, MidiCountEvs,    [  --disable-midishare-driver
362                              have_midishare=1,                            Disable support for the MidiShare system.],
363                              have_midishare=0    [config_midishare_driver="$enableval"],
364                  )    [config_midishare_driver="yes"]
365                  ,  )
366                  have_midishare=0  have_midishare=0
367  )  if test "$config_midishare_driver" = "yes"; then
368  if test "$have_midishare" = "1"; then      AC_CHECK_HEADER(MidiShare.h,
369      have_midi_input_driver="true"          AC_CHECK_LIB(MidiShare, MidiCountEvs,
370                                    have_midishare=1,
371                                    have_midishare=0
372                        )
373                        ,
374                        have_midishare=0
375        )
376        if test "$have_midishare" = "1"; then
377            have_midi_input_driver="true"
378        fi
379    else
380        echo "MidiShare support disabled by configure script parameter"
381  fi  fi
382  AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")  AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
383  AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])  AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
384    
385  # CoreMIDI (OS X)  # CoreMIDI (OS X)
386  AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,  AC_ARG_ENABLE(coremidi-driver,
387                  have_coremidi=1,    [  --disable-coremidi-driver
388                  have_coremidi=0                            Disable support for the Apple CoreMIDI system.],
389  )    [config_coremidi_driver="$enableval"],
390  if test "$have_coremidi" = "1"; then    [config_coremidi_driver="yes"]
391      have_midi_input_driver="true"  )
392    have_coremidi=0
393    if test "$config_coremidi_driver" = "yes"; then
394        AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
395            have_coremidi=1,
396            have_coremidi=0
397        )
398        if test "$have_coremidi" = "1"; then
399            have_midi_input_driver="true"
400        fi
401    else
402        echo "CoreMIDI support disabled by configure script parameter"
403  fi  fi
404  AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")  AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
405  AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])  AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
406    
407  # Check presence of libgig  # MME MIDI (Win32)
408  libgig_version="2.0.1"  AC_ARG_ENABLE(mmemidi-driver,
409  PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)    [  --disable-mmemidi-driver
410  if test "$HAVE_GIG" = "false"; then                            Disable support for the Windows MME MIDI system.],
411      echo "Required libgig version not found!"    [config_mmemidi_driver="$enableval"],
412      echo "You need to have libgig version ${libgig_version} installed!"    [config_mmemidi_driver="yes"]
413      exit -1;  )
414  fi  have_mmemidi=0
415  AC_SUBST(GIG_CFLAGS)  if test "$config_mmemidi_driver" = "yes"; then
416  AC_SUBST(GIG_LIBS)      AC_CHECK_HEADERS(mmsystem.h,
417            have_mmemidi=1,
418  # SQLITE3          have_mmemidi=0
419  PKG_CHECK_MODULES(SQLITE3, sqlite3, HAVE_SQLITE3=true, HAVE_SQLITE3=false)      )
420  AC_SUBST(SQLITE3_LIBS)      if test "$have_mmemidi" = "1"; then
421  AC_SUBST(SQLITE3_CFLAGS)          have_midi_input_driver="true"
422  if test $HAVE_SQLITE3 = false; then      fi
     HAVE_SQLITE3=0;  
423  else  else
424      HAVE_SQLITE3=1      echo "MME MIDI support disabled by configure script parameter"
425  fi  fi
426  AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)  AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
427  AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you have SQLITE3 installed.])  AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
428    
429    # have we found at least one MIDI input and one audio output driver ?
430  if test "$have_midi_input_driver" = "false"; then  if test "$have_midi_input_driver" = "false"; then
431      echo "No supported MIDI input system found!"      echo "No supported MIDI input system found!"
432      echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"      echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
# Line 209  if test "$have_midi_input_driver" = "fal Line 437  if test "$have_midi_input_driver" = "fal
437  fi  fi
438  if test "$have_audio_output_driver" = "false"; then  if test "$have_audio_output_driver" = "false"; then
439      echo "No supported audio output system found!"      echo "No supported audio output system found!"
440      echo "Sorry, LinuxSampler only supports ALSA and JACK as audio output driver at the moment!"      echo "Sorry, LinuxSampler only supports ALSA, JACK and ARTS as audio output"
441        echo "driver at the moment!"
442      exit -1;      exit -1;
443  fi  fi
444    
445    
446    
447    ###########################################################################
448    # Checks for various DLL libraries
449    
450    # Check presence of libgig
451    libgig_version="3.2.1"
452    PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
453    if test "$HAVE_GIG" = "false"; then
454        echo "Required libgig version not found!"
455        echo "You need to have libgig version ${libgig_version} installed!"
456        exit -1;
457    else
458        echo "yes, found libgig $libgig_version"
459    fi
460    AC_SUBST(GIG_CFLAGS)
461    AC_SUBST(GIG_LIBS)
462    
463    # Instruments DB feature (requires SQLite 3.3)
464    AC_ARG_ENABLE(instruments-db,
465      [  --disable-instruments-db
466                              Disable compilation of the sampler's instruments
467                              database feature. You need to have SQLite 3.3
468                              or younger installed for this feature.],
469      [config_instruments_db="$enableval"],
470      [config_instruments_db="yes"]
471    )
472    HAVE_SQLITE3=0;
473    if test "$config_instruments_db" = "yes"; then
474        # Check presence of sqlite3
475        sqlite_version="3.3"
476        PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
477        AC_SUBST(SQLITE3_LIBS)
478        AC_SUBST(SQLITE3_CFLAGS)
479        if test $HAVE_SQLITE3 = false; then
480            HAVE_SQLITE3=0
481            config_instruments_db="no"
482            echo "*** Required sqlite version not found!"
483            echo "*** You need to have sqlite version ${sqlite_version} or higher"
484            echo "*** for instruments database support to be enabled."
485            echo "*** Support for instruments DB will be disabled!"
486        else
487            HAVE_SQLITE3=1
488        fi
489    else
490        echo "Instruments DB feature disabled by configure script parameter"
491    fi
492    AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
493    AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
494    
495    
496    
497  ###########################################################################  ###########################################################################
498  # Handle Configuration Options  # Handle Configuration Options
499    
# Line 221  fi Line 501  fi
501    
502  AC_ARG_ENABLE(asm,  AC_ARG_ENABLE(asm,
503    [  --disable-asm    [  --disable-asm
504                            Disable hand-crafted assembly optimizations                            Enable hand-crafted assembly optimizations
505                            (default=on). LinuxSampler provides CPU specific                            (default=on). LinuxSampler provides CPU specific
506                            assembly optimizations for the most important                            assembly optimizations. This is currently limited
507                            synthesis algorithms. You usually don't want to                            to just enter a fast (denormal) FPU mode on x86
508                            disable that.],                            platforms. There are currently no synthesis core
509    [config_asm="no"],                            assembly optimizations anymore since LS 0.4.0],
510      [config_asm="$enableval"],
511    [config_asm="yes"]    [config_asm="yes"]
512  )  )
513  if test "$config_asm" = "yes"; then  if test "$config_asm" = "yes"; then
514    AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable hand-crafted asm optimizations.])    AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
515  fi  fi
516    
517  AC_ARG_ENABLE(dev-mode,  AC_ARG_ENABLE(dev-mode,
518    [  --enable-dev-mode    [  --enable-dev-mode
519                            Enable development mode (default=no). In that mode                            Enable development mode (default=off). In that mode
520                            we do some extra sanity checks here and there.                            we do some extra sanity checks here and there.
521                            This helps to spot possible problems, but reduces                            This helps to spot possible problems, but reduces
522                            efficiency a bit],                            efficiency a bit],
523    [config_dev_mode="yes"],    [config_dev_mode="$enableval"],
524    [config_dev_mode="no"]    [config_dev_mode="no"]
525  )  )
526  if test "$config_dev_mode" = "yes"; then  if test "$config_dev_mode" = "yes"; then
# Line 267  AC_ARG_ENABLE(rt-exceptions, Line 548  AC_ARG_ENABLE(rt-exceptions,
548                            context as well. Otherwise if disabled                            context as well. Otherwise if disabled
549                            segmentation faults will be forced by the                            segmentation faults will be forced by the
550                            application on critical errors.],                            application on critical errors.],
551    [config_rt_exceptions="yes"],    [config_rt_exceptions="$enableval"],
552    [config_rt_exceptions="no"]    [config_rt_exceptions="no"]
553  )  )
554  if test "$config_rt_exceptions" = "yes"; then  if test "$config_rt_exceptions" = "yes"; then
555    AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])    AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
556  fi  fi
557    
558    AC_ARG_ENABLE(pthread-testcancel,
559      [  --enable-pthread-testcancel
560                              Enable pthread_testcancel() calls and avoid asynchronous
561                              cancel of pthreads (default=no).],
562      [config_pthread_testcancel="$enableval"],
563      [config_pthread_testcancel="no"]
564    )
565    if test "$config_pthread_testcancel" = "yes"; then
566      AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
567    fi
568    
569  AC_ARG_ENABLE(preload-samples,  AC_ARG_ENABLE(preload-samples,
570    [  --enable-preload-samples    [  --enable-preload-samples
571                            Due to seeking and latency issues with hard drives                            Due to seeking and latency issues with hard drives
# Line 397  AC_ARG_ENABLE(max-voices, Line 689  AC_ARG_ENABLE(max-voices,
689  )  )
690  AC_DEFINE_UNQUOTED(CONFIG_MAX_VOICES, $config_max_voices, [Define max. voices.])  AC_DEFINE_UNQUOTED(CONFIG_MAX_VOICES, $config_max_voices, [Define max. voices.])
691    
692    AC_ARG_ENABLE(subfragment-size,
693      [  --enable-subfragment-size
694                              Every audio fragment will be splitted into
695                              subfragments. Where each subfragment renders
696                              audio with constant synthesis parameters. This is
697                              done for efficiency reasons. This parameter
698                              defines the default size of a subfragment in
699                              sample points. A large value means less CPU time
700                              whereas a low value means better audio quality
701                              (default=32).],
702      [config_subfragment_size="${enableval}"],
703      [config_subfragment_size="32"]
704    )
705    AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
706    
707    AC_ARG_ENABLE(global-attenuation-default,
708      [  --enable-global-attenuation-default
709                              To prevent clipping all samples will be lowered
710                              in amplitude by this given default factor (can
711                              be overridden at runtime).
712                              (default=0.35)],
713      [config_global_attenuation_default="${enableval}"],
714      [config_global_attenuation_default="0.35"]
715    )
716    AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
717    
718  AC_ARG_ENABLE(voice-steal-algo,  AC_ARG_ENABLE(voice-steal-algo,
719    [  --enable-voice-steal-algo    [  --enable-voice-steal-algo
720                            Voice stealing algorithm to be used. Currently                            Voice stealing algorithm to be used. Currently
# Line 430  AC_ARG_ENABLE(sysex-buffer-size, Line 748  AC_ARG_ENABLE(sysex-buffer-size,
748  )  )
749  AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])  AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
750    
 AC_ARG_ENABLE(filter-update-steps,  
   [  --enable-filter-update-steps  
                           Amount of sample points after which filter  
                           parameters (cutoff, resonance) are going to be  
                           updated (default=64). Higher value means less CPU  
                           load, but also worse parameter resolution, this  
                           value will be aligned to a power of two.],  
   [config_filter_update_steps="${enableval}"],  
   [config_filter_update_steps="64"]  
 )  
 AC_DEFINE_UNQUOTED(CONFIG_FILTER_UPDATE_STEPS, $config_filter_update_steps, [Define amount of steps to refresh filter coefficients.])  
   
751  AC_ARG_ENABLE(force-filter,  AC_ARG_ENABLE(force-filter,
752    [  --enable-force-filter    [  --enable-force-filter
753                            If enabled will force filter to be used even if                            If enabled will force filter to be used even if
754                            no usage was define in instrument patch files.                            no usage was define in instrument patch files.
755                            (default=no).],                            (default=no).],
756    [config_force_filter="yes"],    [config_force_filter="$enableval"],
757    [config_force_filter="no"]    [config_force_filter="no"]
758  )  )
759  if test "$config_force_filter" = "yes"; then  if test "$config_force_filter" = "yes"; then
# Line 537  AC_ARG_ENABLE(gs-checksum, Line 843  AC_ARG_ENABLE(gs-checksum,
843                            messages which do not provide a correct checksum                            messages which do not provide a correct checksum
844                            will be ignored. This is disabled by default as                            will be ignored. This is disabled by default as
845                            not all devices honor GS checksums.],                            not all devices honor GS checksums.],
846    [config_assert_gs_sysex_checksum="yes"],    [config_assert_gs_sysex_checksum="$enableval"],
847    [config_assert_gs_sysex_checksum="no"]    [config_assert_gs_sysex_checksum="no"]
848  )  )
849  if test "config_assert_gs_sysex_checksum" = "yes"; then  if test "config_assert_gs_sysex_checksum" = "yes"; then
850    AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])    AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
851  fi  fi
852    
853    AC_ARG_ENABLE(portamento-time-min,
854      [  --enable-portamento-time-min
855                              Minimum Portamento time in seconds
856                              (default=0.1).],
857      [config_portamento_time_min="${enableval}"],
858      [config_portamento_time_min="0.1"]
859    )
860    AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
861    
862    AC_ARG_ENABLE(portamento-time-max,
863      [  --enable-portamento-time-max
864                              Maximum Portamento time in seconds
865                              (default=32).],
866      [config_portamento_time_max="${enableval}"],
867      [config_portamento_time_max="32"]
868    )
869    AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
870    
871    AC_ARG_ENABLE(portamento-time-default,
872      [  --enable-portamento-time-default
873                              Default Portamento time in seconds
874                              (default=1).],
875      [config_portamento_time_default="${enableval}"],
876      [config_portamento_time_default="1"]
877    )
878    AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
879    
880    AC_ARG_ENABLE(signed-triang-algo,
881      [  --enable-signed-triang-algo
882                              Signed triangular wave algorithm to be used (e.g. for LFOs).
883                              Currently available options:
884                                intmath:
885                                  Uses integer math without any branch will then be
886                                  converted to floating point value for each sample point.
887                                  This int->float conversion might hurt on some systems.
888                                intmathabs:
889                                  Similar to intmath but uses abs() function.
890                                  Depending on compiler and platrofm this could
891                                  perform better than integer math as it avoids
892                                  an extra integer multiply instruction.
893                                diharmonic:
894                                  The triangular wave will be approximated by adding two
895                                  sinusoidials. This solution might especially hurt on
896                                  systems with weak floating point unit.
897                                benchmark (default):
898                                  This is not an algorithm. Use this option if the
899                                  appropriate algorithm should be automatically
900                                  chosen by the configure script by performing a
901                                  benchmark between the algorithms mentioned above.
902                                  This will NOT work for cross compilation!],
903      [ if test ! "(" "${enableval}" = "intmath" \
904                  -o "${enableval}" = "intmathabs" \
905                  -o "${enableval}" = "diharmonic" ")" ; then
906          AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
907        else
908          config_signed_triang_algo="${enableval}"
909        fi
910      ],
911      [config_signed_triang_algo="benchmark"]
912    )
913    
914    AC_ARG_ENABLE(unsigned-triang-algo,
915      [  --enable-unsigned-triang-algo
916                              Unsigned triangular wave algorithm to be used (e.g. for LFOs).
917                              Currently available options:
918                                intmath:
919                                  Uses integer math without any branch will then be
920                                  converted to floating point value for each sample point.
921                                  This int->float conversion might hurt on some systems.
922                                intmathabs:
923                                  Similar to intmath but uses abs() function.
924                                  Depending on compiler and platrofm this could
925                                  perform better than integer math as it avoids
926                                  an extra integer multiply instruction.
927                                diharmonic:
928                                  The triangular wave will be approximated by adding two
929                                  sinusoidials. This solution might especially hurt on
930                                  systems with weak floating point unit.
931                                benchmark (default):
932                                  This is not an algorithm. Use this option if the
933                                  appropriate algorithm should be automatically
934                                  chosen by the configure script by performing a
935                                  benchmark between the algorithms mentioned above.
936                                  This will NOT work for cross compilation!],
937      [ if test ! "(" "${enableval}" = "intmath" \
938                  -o "${enableval}" = "intmathabs" \
939                  -o "${enableval}" = "diharmonic" ")" ; then
940          AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
941        else
942          config_unsigned_triang_algo="${enableval}"
943        fi
944      ],
945      [config_unsigned_triang_algo="benchmark"]
946    )
947    
948    AC_ARG_ENABLE(process-muted-channels,
949      [  --enable-process-muted-channels
950                              Enable processing of muted channels (default=no).
951                              In that mode all MIDI events in the muted channels
952                              will be processed. This will provide information
953                              about the active voices in the muted channels and
954                              will not discard notes, triggered in mute mode,
955                              when the channel is unmuted. But also will reduce
956                              the efficiency.],
957      [config_process_muted_channels="$enableval"],
958      [config_process_muted_channels="no"]
959    )
960    if test "$config_process_muted_channels" = "yes"; then
961      AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
962    fi
963    
964    AC_ARG_ENABLE(process-all-notes-off,
965      [  --disable-process-all-notes-off
966                              Disable interpretation of All-Notes-Off MIDI
967                              messages (default=on). By default LS will release
968                              all voices whenever it receives an All-Notes-Off
969                              MIDI message. You can disable this behavior, so
970                              that LS simply ignores such messages.],
971      [config_process_all_notes_off="$enableval"],
972      [config_process_all_notes_off="yes"]
973    )
974    if test "$config_process_all_notes_off" = "yes"; then
975      AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
976    fi
977    
978    AC_ARG_ENABLE(interpolate-volume,
979      [  --disable-interpolate-volume
980                              Disable interpolation of volume modulation
981                              (default=on). With this enabled, the volume changes
982                              generated by for example the envelope generator
983                              will be smoother, minimizing the risk for audio
984                              clicks. Disable it to reduce CPU usage.],
985      [config_interpolate_volume="$enableval"],
986      [config_interpolate_volume="yes"]
987    )
988    if test "$config_interpolate_volume" = "yes"; then
989      AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
990    fi
991    
992    AC_ARG_ENABLE(plugin-dir,
993      [  --enable-plugin-dir
994                              Directory where the sampler shall look for potential plugins,
995                              that is 3rd party shared libraries that should be loaded by
996                              the sampler on startup. By default the sampler will search
997                              for plugins in the subdirectory "plugins" below its own
998                              library directory.
999                              (i.e. /usr/local/lib/linuxsampler/plugins)],
1000      [config_plugin_dir="${enableval}"],
1001      [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1002    )
1003    AC_SUBST(config_plugin_dir)
1004    
1005    AC_ARG_ENABLE(default-instruments-db-location,
1006      [  --enable-default-instruments-db-location
1007                              Only when instruments DB feature is enabled: file name
1008                              which shall be taken as default location of the
1009                              instruments DB file. This location can still be
1010                              overridden at runtime with a command line switch.
1011                              (default: /var/lib/linuxsampler/instruments.db)],
1012      [config_default_instruments_db_file="${enableval}"],
1013      [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1014    )
1015    AC_DEFINE_UNQUOTED(
1016        CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1017        "$config_default_instruments_db_file",
1018        [Only when instruments DB feature is enabled: default location of the DB file.]
1019    )
1020    AC_SUBST(config_default_instruments_db_file)
1021    
1022    
1023    ###########################################################################
1024    # Automatic Benchmarks (to detect the best algorithms for the system)
1025    
1026    AC_LANG_SAVE
1027    
1028    if test "$config_signed_triang_algo" = "benchmark"; then
1029        echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1030        AC_LANG_CPLUSPLUS
1031        AC_TRY_RUN([
1032                #define SIGNED 1
1033                #define SILENT 1
1034                #include "${srcdir}/benchmarks/triang.cpp"
1035            ],
1036            triang_signed=0,
1037            triang_signed=$?,
1038            triang_signed=0
1039        )
1040        if test "$triang_signed" = "2"; then
1041            config_signed_triang_algo="intmath"
1042            echo "integer math"
1043        elif test "$triang_signed" = "3"; then
1044            config_signed_triang_algo="diharmonic"
1045            echo "di harmonics"
1046        elif test "$triang_signed" = "5"; then
1047            config_signed_triang_algo="intmathabs"
1048            echo "integer math using abs()"
1049        else
1050            echo "Benchmark of signed triangular wave algorithms failed!"
1051            echo "Maybe you are doing cross compilation? In that case you have to select"
1052            echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1053            echo "Call './configure --help' for further information or read configure.in."
1054            exit -1;
1055        fi
1056    else
1057        case "$config_signed_triang_algo" in
1058            intmath)
1059                triang_signed=2 ;;
1060            diharmonic)
1061                triang_signed=3 ;;
1062            intmathabs)
1063                triang_signed=5 ;;
1064        esac
1065    fi
1066    AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1067    
1068    if test "$config_unsigned_triang_algo" = "benchmark"; then
1069        echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1070        AC_LANG_CPLUSPLUS
1071        AC_TRY_RUN([
1072                #define SIGNED 0
1073                #define SILENT 1
1074                #include "${srcdir}/benchmarks/triang.cpp"
1075            ],
1076            triang_unsigned=0,
1077            triang_unsigned=$?,
1078            triang_unsigned=0
1079        )
1080        if test "$triang_unsigned" = "2"; then
1081            config_unsigned_triang_algo="intmath"
1082            echo "integer math"
1083        elif test "$triang_unsigned" = "3"; then
1084            config_unsigned_triang_algo="diharmonic"
1085            echo "di harmonics"
1086        elif test "$triang_unsigned" = "5"; then
1087            config_unsigned_triang_algo="intmathabs"
1088            echo "integer math using abs()"
1089        else
1090            echo "Benchmark of unsigned triangular wave algorithms failed!"
1091            echo "Maybe you are doing cross compilation? In that case you have to select"
1092            echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1093            echo "Call './configure --help' for further information or read configure.in."
1094            exit -1;
1095        fi
1096    else
1097        case "$config_unsigned_triang_algo" in
1098            intmath)
1099                triang_unsigned=2 ;;
1100            diharmonic)
1101                triang_unsigned=3 ;;
1102            intmathabs)
1103                triang_unsigned=5 ;;
1104        esac
1105    fi
1106    AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1107    
1108    AC_LANG_RESTORE
1109    
1110    
1111  ###########################################################################  ###########################################################################
1112  # Create Build Files  # Create Build Files
1113    
1114  AM_CONFIG_HEADER(config.h)  AM_CONFIG_HEADER(config.h)
1115  AM_INIT_AUTOMAKE(linuxsampler, 0.3.2)  AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1116    
1117  AC_LANG_CPLUSPLUS  AC_LANG_CPLUSPLUS
1118  AC_PROG_CXX  AC_PROG_CXX
# Line 565  fi Line 1128  fi
1128  # this, the dlfcn.h check in am_prog_libtool may fail.  # this, the dlfcn.h check in am_prog_libtool may fail.
1129  AC_CHECK_HEADER(stdlib.h)  AC_CHECK_HEADER(stdlib.h)
1130    
 AM_PROG_LIBTOOL  
   
1131  AC_OUTPUT( \  AC_OUTPUT( \
1132      Makefile \      Makefile \
1133      man/Makefile \      man/Makefile \
1134      man/linuxsampler.1 \      man/linuxsampler.1 \
1135      src/Makefile \      src/Makefile \
1136        src/db/Makefile \
1137      src/network/Makefile \      src/network/Makefile \
1138      src/engines/Makefile \      src/engines/Makefile \
1139      src/engines/gig/Makefile \      src/engines/gig/Makefile \
1140      src/engines/common/Makefile \      src/engines/common/Makefile \
1141      src/common/Makefile src/lib/Makefile \      src/common/Makefile \
     src/lib/fileloader/Makefile \  
     src/lib/fileloader/libgig/Makefile \  
1142      src/testcases/Makefile \      src/testcases/Makefile \
1143      src/drivers/Makefile \      src/drivers/Makefile \
1144      src/drivers/audio/Makefile \      src/drivers/audio/Makefile \
1145      src/drivers/midi/Makefile \      src/drivers/midi/Makefile \
1146        src/plugins/Makefile \
1147      linuxsampler.spec \      linuxsampler.spec \
1148      debian/Makefile \      debian/Makefile \
1149      Artwork/Makefile \      Artwork/Makefile \
1150      scripts/Makefile \      scripts/Makefile \
1151      osx/Makefile \      osx/Makefile \
1152      osx/LinuxSampler.xcode/Makefile \      osx/linuxsampler.xcodeproj/Makefile \
1153      Documentation/Makefile \      Documentation/Makefile \
1154      Documentation/Engines/Makefile \      Documentation/Engines/Makefile \
1155      Documentation/Engines/gig/Makefile \      Documentation/Engines/gig/Makefile \
1156        linuxsampler.pc \
1157        Doxyfile \
1158  )  )
1159    
1160    # resolve all nested variables in '${config_plugin_dir}'
1161    # (merely for providing a human readable summary below)
1162    while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1163            config_plugin_dir=`eval echo ${config_plugin_dir}`
1164    done
1165    
1166    
1167  ###########################################################################  ###########################################################################
1168  # Output All Configuration Options  # Output All Configuration Options
# Line 617  echo "# Maximum Stream Refill Size: ${co Line 1186  echo "# Maximum Stream Refill Size: ${co
1186  echo "# Stream Size: ${config_stream_size}"  echo "# Stream Size: ${config_stream_size}"
1187  echo "# Maximum Disk Streams: ${config_max_streams}"  echo "# Maximum Disk Streams: ${config_max_streams}"
1188  echo "# Maximum Voices: ${config_max_voices}"  echo "# Maximum Voices: ${config_max_voices}"
1189    echo "# Default Subfragment Size: ${config_subfragment_size}"
1190    echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1191  echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"  echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1192    echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1193    echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1194  echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"  echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1195  echo "# Filter Update Steps: ${config_filter_update_steps}"  echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1196    echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1197    echo "# Default Portamento Time: ${config_portamento_time_default} s"
1198  echo "# Force Filter Usage: ${config_force_filter}"  echo "# Force Filter Usage: ${config_force_filter}"
1199  echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"  echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1200  echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"  echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
# Line 627  echo "# Override Filter Cutoff Controlle Line 1202  echo "# Override Filter Cutoff Controlle
1202  echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"  echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1203  echo "# Override Filter Type: ${config_override_filter_type}"  echo "# Override Filter Type: ${config_override_filter_type}"
1204  echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"  echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1205    echo "# Process Muted Channels: ${config_process_muted_channels}"
1206    echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1207    echo "# Interpolate Volume: ${config_interpolate_volume}"
1208    echo "# Instruments database support: ${config_instruments_db}"
1209    if test "$config_instruments_db" = "yes"; then
1210    echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1211    fi
1212    echo "# Plugin Path: ${config_plugin_dir}"
1213  echo "#-------------------------------------------------------------------#"  echo "#-------------------------------------------------------------------#"
1214  echo "# Read './configure --help' or file 'configure.in' for details.     #"  echo "# Read './configure --help' or file 'configure.in' for details.     #"
1215  echo "#####################################################################"  echo "#####################################################################"

Legend:
Removed from v.685  
changed lines
  Added in v.1651

  ViewVC Help
Powered by ViewVC