/[svn]/linuxsampler/trunk/configure.in
ViewVC logotype

Diff of /linuxsampler/trunk/configure.in

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 685 by persson, Tue Jul 5 19:30:37 2005 UTC revision 2119 by persson, Fri Aug 27 16:27:16 2010 UTC
# Line 1  Line 1 
1  AC_INIT(configure.in)  AC_INIT(configure.in)
 AC_C_BIGENDIAN  
 AC_CANONICAL_SYSTEM  
2    
3  AC_SUBST(target)  #------------------------------------------------------------------------------------
4  AC_SUBST(target_alias)  # LinuxSampler's / liblinuxsampler's "official" release version:
5  AC_SUBST(target_cpu)  
6  AC_SUBST(target_os)  LINUXSAMPLER_RELEASE_MAJOR=1
7  AC_SUBST(target_vendor)  LINUXSAMPLER_RELEASE_MINOR=0
8    LINUXSAMPLER_RELEASE_BUILD=0.cvs3
9    
10    #------------------------------------------------------------------------------------
11    # The following is the libtool / shared library version. This doesn't have to
12    # do anything with the release version. It MUST conform to the following rules:
13    #
14    #  1. Start with version information of `0:0:0' for each libtool library.
15    #  2. Update the version information only immediately before a public release of
16    #     your software. More frequent updates are unnecessary, and only guarantee
17    #     that the current interface number gets larger faster.
18    #  3. If the library source code has changed at all since the last update, then
19    #     increment revision (`c:r:a' becomes `c:r+1:a').
20    #  4. If any interfaces have been added, removed, or changed since the last update,
21    #     increment current, and set revision to 0.
22    #  5. If any interfaces have been added since the last public release, then increment
23    #     age.
24    #  6. If any interfaces have been removed since the last public release, then set age
25    #     to 0.
26    
27    LIBLINUXSAMPLER_LT_CURRENT=3
28    LIBLINUXSAMPLER_LT_REVISION=0
29    LIBLINUXSAMPLER_LT_AGE=0
30    SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31    
32    #------------------------------------------------------------------------------------
33    # the LSCP specification version this LinuSampler release complies with:
34    
35    LSCP_RELEASE_MAJOR=1
36    LSCP_RELEASE_MINOR=5
37    
38    AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39    AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40    
41    AC_PROG_CXX
42    AC_LIBTOOL_WIN32_DLL
43    AM_PROG_LIBTOOL
44    
45    AC_SUBST(SHLIB_VERSION_ARG)
46    AC_SUBST(SHARED_VERSION_INFO)
47    
48    AC_C_BIGENDIAN
49    AC_CANONICAL_HOST
50    
51    PKG_PROG_PKG_CONFIG
52    
53  ###########################################################################  ###########################################################################
54  # General Checks  # General Checks
55    
56    AM_CONDITIONAL(CROSS_COMPILING, test $cross_compiling = yes)
57    
58  AC_MSG_CHECKING([whether x86 architecture])  AC_MSG_CHECKING([whether x86 architecture])
59  def_arch_x86=0  def_arch_x86=0
60  case $target_cpu in  case $host_cpu in
61    "i386" | "i486" | "i586" | "i686" | "i786")    "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
62      echo "yes"      echo "yes"
63      def_arch_x86=1;;      def_arch_x86=1;;
64    *)    *)
# Line 24  esac Line 67  esac
67  AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])  AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
68    
69  # determine the right gcc switch for CPU specific optimizations  # determine the right gcc switch for CPU specific optimizations
70    # (only if the user did not provide one)
71  CXX_CPU_SWITCH=  CXX_CPU_SWITCH=
72  if test "$def_arch_x86" = 1; then  if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
73    CXX_CPU_SWITCH="-march=$target_cpu"    if test "$def_arch_x86" = 1 -a "$host_cpu" != "x86_64"; then
74  elif test "$target_cpu" = "powerpc"; then      CXX_CPU_SWITCH="-march=$host_cpu"
75    CXX_CPU_SWITCH="-arch=$target_cpu"    elif test "$target_cpu" = "ppc"; then
76        CXX_CPU_SWITCH="-arch=$host_cpu"
77      fi
78  fi  fi
79  AC_SUBST([CXX_CPU_SWITCH])  AC_SUBST([CXX_CPU_SWITCH])
80    
81    # check if we're on MS Windows
82    AC_CHECK_HEADERS(
83        mmsystem.h,
84        have_windows=1,
85        have_windows=0,
86        [#include <windef.h>]
87    )
88    AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
89    
90  AC_MSG_CHECKING([whether UNIX98 compatible])  AC_MSG_CHECKING([whether UNIX98 compatible])
91  AC_LANG_SAVE  AC_LANG_SAVE
92  AC_LANG_C  AC_LANG_C
# Line 54  have_unix98="no" Line 109  have_unix98="no"
109  )  )
110  AC_LANG_RESTORE  AC_LANG_RESTORE
111  AC_MSG_RESULT([$have_unix98])  AC_MSG_RESULT([$have_unix98])
112  if test "$have_unix98" = "no"; then  if test "$have_unix98" = "no" -a "have_windows" = "0"; then
113      if test "x$HAVE_UNIX98" = "x"; then      if test "x$HAVE_UNIX98" = "x"; then
114          echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"          echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
115          echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run          echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
# Line 64  if test "$have_unix98" = "no"; then Line 119  if test "$have_unix98" = "no"; then
119      fi      fi
120  fi  fi
121    
122    # check for <features.h>
123    AC_CHECK_HEADERS(features.h)
124    
125    # test for POSIX thread library
126    m4_ifdef([m4_include(m4/pthread.m4)],,
127                 [sinclude([m4/pthread.m4])])
128    ACX_PTHREAD
129    LIBS="$PTHREAD_LIBS $LIBS"
130    CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
131    CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
132    CC="$PTHREAD_CC"
133    
134    # check for a bug in NPTL-enabled glibc
135    # (see Gentoo bug report #194076)
136    AC_ARG_ENABLE(nptl-bug-check,
137      [  --disable-nptl-bug-check
138                              Disable check for a bug in certain NPTL-enabled
139                              glibc versions that caused crashs.],
140      [config_check_nptl_bug="$enableval"],
141      [config_check_nptl_bug="yes"]
142    )
143    if test "$config_check_nptl_bug" = "yes"; then
144        m4_ifdef([m4_include(m4/nptl_bug.m4)],,
145                 [sinclude([m4/nptl_bug.m4])])
146        ACX_NPTL_GLIBC_BUG([
147            echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
148            echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
149            echo "probably crash due to this. Please report us the system you are"
150            echo "using and/or file a bug report to the bug tracking system of"
151            echo "your distribution."
152            echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
153            echo "well, you can try to circumvent this problem for now by setting"
154            echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
155            echo "should cause this test to pass."
156            echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
157            AC_MSG_ERROR([possibly NPTL glibc bug detected])
158        ])
159    else
160        echo "NPTL glibc bug check disabled"
161    fi
162    
163    # FIXME: this is actually a dependency of libgig, not of LS directly, why
164    # isn't it hidden by libgig?
165    AC_CHECK_HEADERS(uuid/uuid.h)
166    AC_SEARCH_LIBS(uuid_generate, uuid)
167    
168    
169    
170    ###########################################################################
171  # Checks for available audio and MIDI systems / drivers  # Checks for available audio and MIDI systems / drivers
172  # (we throw an error if there's not at least one system for audio output and MIDI input available)  # (we throw an error if there's not at least one system for audio output and MIDI input available)
173    
174  have_midi_input_driver="false"  have_midi_input_driver="false"
175  have_audio_output_driver="false"  have_audio_output_driver="false"
176    
177  AC_CHECK_HEADER(alsa/asoundlib.h,  # ALSA
178      AC_CHECK_LIB(asound, main,  AC_ARG_ENABLE(alsa-driver,
179                               have_alsa=1    [  --disable-alsa-driver
180                               ,                            Disable support for the Advanced Linux Sound
181                               have_alsa=0                            Architecture (ALSA).],
182                  )    [config_alsa_driver="$enableval"],
183                  ,    [config_alsa_driver="yes"]
184                  have_alsa=0  )
185  )  have_alsa=0
186  if test "$have_alsa" = "1"; then  if test "$config_alsa_driver" = "yes"; then
187      have_midi_input_driver="true"      AC_CHECK_HEADER(alsa/asoundlib.h,
188      have_audio_output_driver="true";          AC_CHECK_LIB(asound, main,
189                                     have_alsa=1
190                                     ,
191                                     have_alsa=0
192                        )
193                        ,
194                        have_alsa=0
195        )
196        if test "$have_alsa" = "1"; then
197            have_midi_input_driver="true"
198            have_audio_output_driver="true";
199        fi
200    
201        echo -n "checking Alsa version... "
202        AC_LANG_SAVE
203        AC_LANG_C
204        AC_TRY_RUN([
205            #include <alsa/asoundlib.h>
206            void main(void) {
207                /* ensure backward compatibility */
208                #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
209                #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
210                #endif
211                exit(SND_LIB_MAJOR);
212            }
213        ],
214        alsa_major=0,
215        alsa_major=$?,
216        alsa_major=0
217        )
218        AC_TRY_RUN([
219            #include <alsa/asoundlib.h>
220            void main(void) {
221                /* ensure backward compatibility */
222                #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
223                #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
224                #endif
225                exit(SND_LIB_MINOR);
226            }
227        ],
228        alsa_minor=0,
229        alsa_minor=$?,
230        alsa_minor=0
231        )
232        AC_TRY_RUN([
233            #include <alsa/asoundlib.h>
234            void main(void) {
235                /* ensure backward compatibility */
236                #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
237                #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
238                #endif
239                exit(SND_LIB_SUBMINOR);
240            }
241        ],
242        alsa_subminor=0,
243        alsa_subminor=$?,
244        alsa_subminor=0
245        )
246        AC_LANG_RESTORE
247        echo "$alsa_major.$alsa_minor.$alsa_subminor";
248        AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
249        AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
250        AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
251    else
252        echo "ALSA support disabled by configure script parameter"
253  fi  fi
254  AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")  AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
255  AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])  AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
256    config_have_alsa="no"
257  echo -n "checking Alsa version... "  if test $have_alsa = "1"; then
258  AC_LANG_SAVE      config_have_alsa="yes"
259  AC_LANG_C  fi
 AC_TRY_RUN([  
 #include <alsa/asoundlib.h>  
 void main(void) {  
 /* ensure backward compatibility */  
 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)  
 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR  
 #endif  
 exit(SND_LIB_MAJOR);  
 }  
 ],  
 alsa_major=0,  
 alsa_major=$?,  
 alsa_major=0  
 )  
 AC_TRY_RUN([  
 #include <alsa/asoundlib.h>  
 void main(void) {  
 /* ensure backward compatibility */  
 #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)  
 #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR  
 #endif  
 exit(SND_LIB_MINOR);  
 }  
 ],  
 alsa_minor=0,  
 alsa_minor=$?,  
 alsa_minor=0  
 )  
 AC_TRY_RUN([  
 #include <alsa/asoundlib.h>  
 void main(void) {  
 /* ensure backward compatibility */  
 #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)  
 #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR  
 #endif  
 exit(SND_LIB_SUBMINOR);  
 }  
 ],  
 alsa_subminor=0,  
 alsa_subminor=$?,  
 alsa_subminor=0  
 )  
 AC_LANG_RESTORE  
 echo "$alsa_major.$alsa_minor.$alsa_subminor";  
 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])  
 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])  
 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])  
260    
261  # JACK  # JACK
262  PKG_CHECK_MODULES(JACK, jack, HAVE_JACK=true, HAVE_JACK=false)  AC_ARG_ENABLE(jack-driver,
263  AC_SUBST(JACK_LIBS)    [  --disable-jack-driver
264  AC_SUBST(JACK_CFLAGS)                            Disable support for the Jack Audio Connection Kit
265  if test $HAVE_JACK = false; then                            (JACK).],
266      HAVE_JACK=0;    [config_jack_driver="$enableval"],
267  else    [config_jack_driver="yes"]
268      HAVE_JACK=1  )
269      have_audio_output_driver="true";  have_jack=0
270      AC_CHECK_LIB(jack, jack_client_name_size, [AC_DEFINE(HAVE_JACK_CLIENT_NAME_SIZE, 1, [Define to 1 if you have the `jack_client_name_size' function.])], , $JACK_LIBS)  if test "$config_jack_driver" = "yes"; then
271        PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
272        if test $have_jack = "1"; then
273            AC_SUBST(JACK_LIBS)
274            AC_SUBST(JACK_CFLAGS)
275            linuxsampler_save_LIBS=$LIBS
276            LIBS="$JACK_LIBS $LIBS"
277            AC_CHECK_FUNCS(jack_client_name_size jack_client_open)
278            LIBS=$linuxsampler_save_LIBS
279            have_audio_output_driver="true";
280        fi
281    else
282        echo "JACK support disabled by configure script parameter"
283    fi
284    AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
285    AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
286    config_have_jack="no"
287    if test $have_jack = "1"; then
288        config_have_jack="yes"
289    fi
290    
291    # JACK MIDI
292    have_jack_midi=0
293    if test $have_jack = "1"; then
294        linuxsampler_save_CFLAGS=$CFLAGS
295        linuxsampler_save_LIBS=$LIBS
296        CFLAGS="$JACK_CFLAGS $CFLAGS"
297        LIBS="$JACK_LIBS $LIBS"
298        AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
299        if test $have_jack_midi = "1"; then
300            AC_CHECK_FUNCS(jack_midi_get_event_count)
301            AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
302                jack_midi_clear_buffer(0, 0);
303            ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
304                      [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
305            have_midi_input_driver="true"
306        fi
307        CFLAGS=$linuxsampler_save_CFLAGS
308        LIBS=$linuxsampler_save_LIBS
309    fi
310    AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
311    AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
312                       [Define to 1 if you have JACK with MIDI support installed.])
313    config_have_jack_midi="no"
314    if test $have_jack_midi = "1"; then
315        config_have_jack_midi="yes"
316    fi
317    
318    # ARTS
319    AC_ARG_ENABLE(arts-driver,
320      [  --disable-arts-driver
321                              Disable support for the Analogue Realtime System
322                              (aRts).],
323      [config_arts_driver="$enableval"],
324      [config_arts_driver="yes"]
325    )
326    have_arts=0
327    if test "$config_arts_driver" = "yes"; then
328        m4_ifdef([m4_include(m4/arts.m4)],,
329                 [sinclude([m4/arts.m4])])
330        AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
331        if test "$have_arts" = "1"; then
332            have_audio_output_driver="true"
333        fi
334    else
335        echo "ARTS support disabled by configure script parameter"
336    fi
337    AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
338    AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
339    config_have_arts="no"
340    if test $have_arts = "1"; then
341        config_have_arts="yes"
342    fi
343    
344    # ASIO AUDIO (Win32)
345    AC_ARG_ENABLE(asiosdk-dir,
346      [  --enable-asiosdk-dir
347                              Directory where the ASIO SDK is located, this automatically
348                              enables the compilation of the ASIO audio output driver.],
349      [config_asiosdk_dir="${enableval}"],
350      [config_asiosdk_dir="."]
351    )
352    AC_SUBST(config_asiosdk_dir)
353    
354    AC_ARG_ENABLE(asio-driver,
355      [  --disable-asio-driver
356                              Disable support for the Windows ASIO driver.],
357      [config_asio_driver="$enableval"],
358      [config_asio_driver="yes"]
359    )
360    have_asio=0
361    ASIOSDK_BASEDIR=
362    if test "$config_asio_driver" = "yes"; then
363        asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
364        echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
365        if test -e $asiosdk_headerfile ; then
366            echo yes
367            have_asio=1
368            ASIOSDK_BASEDIR="$config_asiosdk_dir"
369        else
370            echo no
371            have_asio=0
372        fi
373        if test "$have_asio" = "1"; then
374            have_audio_output_driver="true"
375        fi
376    else
377        echo "Windows ASIO support disabled by configure script parameter"
378    fi
379    AC_SUBST(ASIOSDK_BASEDIR)
380    AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
381    AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
382    config_have_asio="no"
383    if test $have_asio = "1"; then
384        config_have_asio="yes"
385  fi  fi
 AM_CONDITIONAL(HAVE_JACK, test $HAVE_JACK = 1)  
 AC_DEFINE_UNQUOTED(HAVE_JACK,$HAVE_JACK,[Define to 1 if you have JACK installed.])  
386    
387  # MidiShare (Linux, OS X, Windows)  # MidiShare (Linux, OS X, Windows)
388  AC_CHECK_HEADER(MidiShare.h,  AC_ARG_ENABLE(midishare-driver,
389      AC_CHECK_LIB(MidiShare, MidiCountEvs,    [  --disable-midishare-driver
390                              have_midishare=1,                            Disable support for the MidiShare system.],
391                              have_midishare=0    [config_midishare_driver="$enableval"],
392                  )    [config_midishare_driver="yes"]
393                  ,  )
394                  have_midishare=0  have_midishare=0
395  )  if test "$config_midishare_driver" = "yes"; then
396  if test "$have_midishare" = "1"; then      AC_CHECK_HEADER(MidiShare.h,
397      have_midi_input_driver="true"          AC_CHECK_LIB(MidiShare, MidiCountEvs,
398                                    have_midishare=1,
399                                    have_midishare=0
400                        )
401                        ,
402                        have_midishare=0
403        )
404        if test "$have_midishare" = "1"; then
405            have_midi_input_driver="true"
406        fi
407    else
408        echo "MidiShare support disabled by configure script parameter"
409  fi  fi
410  AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")  AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
411  AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])  AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
412    config_have_midishare="no"
413    if test $have_midishare = "1"; then
414        config_have_midishare="yes"
415    fi
416    
417  # CoreMIDI (OS X)  # CoreMIDI (OS X)
418  AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,  AC_ARG_ENABLE(coremidi-driver,
419                  have_coremidi=1,    [  --disable-coremidi-driver
420                  have_coremidi=0                            Disable support for the Apple CoreMIDI system.],
421  )    [config_coremidi_driver="$enableval"],
422  if test "$have_coremidi" = "1"; then    [config_coremidi_driver="yes"]
423      have_midi_input_driver="true"  )
424    have_coremidi=0
425    if test "$config_coremidi_driver" = "yes"; then
426        AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
427            have_coremidi=1,
428            have_coremidi=0
429        )
430        if test "$have_coremidi" = "1"; then
431            have_midi_input_driver="true"
432        fi
433    else
434        echo "CoreMIDI support disabled by configure script parameter"
435  fi  fi
436  AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")  AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
437  AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])  AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
438    config_have_coremidi="no"
439    if test $have_coremidi = "1"; then
440        config_have_coremidi="yes"
441    fi
442    
443  # Check presence of libgig  # CoreAudio (OS X)
444  libgig_version="2.0.1"  AC_ARG_ENABLE(coreaudio-driver,
445  PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)    [  --disable-coreaudio-driver
446  if test "$HAVE_GIG" = "false"; then                            Disable support for the Apple CoreAudio system.],
447      echo "Required libgig version not found!"    [config_coreaudio_driver="$enableval"],
448      echo "You need to have libgig version ${libgig_version} installed!"    [config_coreaudio_driver="yes"]
449      exit -1;  )
450    have_coreaudio=0
451    if test "$config_coreaudio_driver" = "yes"; then
452        AC_CHECK_HEADER(CoreAudio/CoreAudio.h,
453            have_coreaudio=1,
454            have_coreaudio=0
455        )
456        if test "$have_coreaudio" = "1"; then
457            have_audio_output_driver="true"
458        fi
459    else
460        echo "CoreAudio support disabled by configure script parameter"
461    fi
462    AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1")
463    AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.])
464    config_have_coreaudio="no"
465    if test $have_coreaudio = "1"; then
466        config_have_coreaudio="yes"
467  fi  fi
 AC_SUBST(GIG_CFLAGS)  
 AC_SUBST(GIG_LIBS)  
468    
469  # SQLITE3  # MME MIDI (Win32)
470  PKG_CHECK_MODULES(SQLITE3, sqlite3, HAVE_SQLITE3=true, HAVE_SQLITE3=false)  AC_ARG_ENABLE(mmemidi-driver,
471  AC_SUBST(SQLITE3_LIBS)    [  --disable-mmemidi-driver
472  AC_SUBST(SQLITE3_CFLAGS)                            Disable support for the Windows MME MIDI system.],
473  if test $HAVE_SQLITE3 = false; then    [config_mmemidi_driver="$enableval"],
474      HAVE_SQLITE3=0;    [config_mmemidi_driver="yes"]
475    )
476    have_mmemidi=0
477    if test "$config_mmemidi_driver" = "yes"; then
478        AC_CHECK_HEADERS(mmsystem.h,
479            have_mmemidi=1,
480            have_mmemidi=0
481        )
482        if test "$have_mmemidi" = "1"; then
483            have_midi_input_driver="true"
484        fi
485  else  else
486      HAVE_SQLITE3=1      echo "MME MIDI support disabled by configure script parameter"
487  fi  fi
488  AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)  AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
489  AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you have SQLITE3 installed.])  AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
490    config_have_mme="no"
491    if test $have_mmemidi = "1"; then
492        config_have_mme="yes"
493    fi
494    
495    # DSSI
496    AC_CHECK_HEADERS(dssi.h,
497            config_have_dssi="yes",
498            config_have_dssi="no")
499    AM_CONDITIONAL(HAVE_DSSI, test $config_have_dssi = "yes")
500    
501    # LV2
502    PKG_CHECK_MODULES(LV2, lv2core, config_have_lv2="yes", config_have_lv2="no")
503    if test $config_have_lv2 = "no"; then
504        AC_CHECK_HEADER(lv2.h, config_have_lv2="yes", config_have_lv2="no")
505    fi
506    AM_CONDITIONAL(HAVE_LV2, test $config_have_lv2 = "yes")
507    
508    # VST
509    AC_ARG_ENABLE(vstsdk-dir,
510      [  --enable-vstsdk-dir
511                              Directory where the VST SDK is located.
512                              This automatically enables the compilation
513                              of the VST plugin.],
514      [VSTSDK_DIR="${enableval}"],
515      [VSTSDK_DIR=]
516    )
517    AC_SUBST(VSTSDK_DIR)
518    AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
519    config_have_vst="no"
520    if test "x$VSTSDK_DIR" != "x"; then
521        config_have_vst="yes"
522    fi
523    
524    # AU
525    AC_CHECK_HEADERS(AudioUnit/AudioUnit.h,
526            config_have_au="yes",
527            config_have_au="no")
528    AM_CONDITIONAL(HAVE_AU, test $config_have_au = "yes")
529    AM_CONDITIONAL(HAVE_AUFLAGS, test "$AUFLAGS" != "")
530    
531    
532    # have we found at least one MIDI input and one audio output driver ?
533  if test "$have_midi_input_driver" = "false"; then  if test "$have_midi_input_driver" = "false"; then
534      echo "No supported MIDI input system found!"      echo "No supported MIDI input system found!"
535      echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"      echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
536      echo "ALSA, MIDIShare, CoreMIDI."      echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
537      echo "If you think you have one of those available on your system, make sure you"      echo "If you think you have one of those available on your system, make sure you"
538      echo "also have the respective development (header) files installed."      echo "also have the respective development (header) files installed."
539      exit -1;      exit -1;
540  fi  fi
541  if test "$have_audio_output_driver" = "false"; then  if test "$have_audio_output_driver" = "false"; then
542      echo "No supported audio output system found!"      echo "No supported audio output system found!"
543      echo "Sorry, LinuxSampler only supports ALSA and JACK as audio output driver at the moment!"      echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
544        echo "driver at the moment!"
545      exit -1;      exit -1;
546  fi  fi
547    
548    
549    
550    ###########################################################################
551    # Checks for various DLL libraries
552    
553    # Check presence of libgig
554    libgig_version="3.3.0"
555    PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
556    if test "$HAVE_GIG" = "false"; then
557        echo "Required libgig version not found!"
558        echo "You need to have libgig version ${libgig_version} installed!"
559        exit -1;
560    else
561        echo "yes, found libgig $libgig_version"
562    fi
563    AC_SUBST(GIG_CFLAGS)
564    AC_SUBST(GIG_LIBS)
565    
566    # SF2 Engine (requires libgig)
567    AC_ARG_ENABLE(sf2-engine,
568      [  --disable-sf2-engine
569                              Disable compilation of the SF2 engine.
570                              You need to have libgig installed.],
571      [config_sf2_engine="$enableval"],
572      [config_sf2_engine="yes"]
573    )
574    HAVE_SF2=0;
575    if test "$config_sf2_engine" = "yes"; then
576        HAVE_SF2=1
577    else
578        echo "SF2 engine disabled by configure script parameter"
579    fi
580    AM_CONDITIONAL(HAVE_SF2, test $HAVE_SF2 = 1)
581    AC_DEFINE_UNQUOTED(HAVE_SF2,$HAVE_SF2,[Define to 1 if you want SF2 engine and have libsf2 installed.])
582    config_have_sf2="no"
583    if test $HAVE_SF2 = "1"; then
584        config_have_sf2="yes"
585    fi
586    
587    # Check presence of libsndfile
588    libsndfile_version="1.0"
589    PKG_CHECK_MODULES(SNDFILE, sndfile >= $libsndfile_version, HAVE_SNDFILE=true, HAVE_SNDFILE=false)
590    if test "$HAVE_SNDFILE" = "false"; then
591        echo "Required libsndfile version not found!"
592        echo "You need to have libsndfile version ${libsndfile_version} installed!"
593        exit -1;
594    else
595        echo "yes, found libsndfile $libsndfile_version"
596    fi
597    AC_SUBST(SNDFILE_CFLAGS)
598    AC_SUBST(SNDFILE_LIBS)
599    
600    # Check for Vorbis support in libsndfile
601    linuxsampler_save_CFLAGS=$CFLAGS
602    CFLAGS="$SNDFILE_CFLAGS $CFLAGS"
603    AC_CHECK_DECLS([SF_FORMAT_VORBIS], [], [] ,[[#include <sndfile.h>]])
604    CFLAGS=$linuxsampler_save_CFLAGS
605    
606    # Instruments DB feature (requires SQLite 3.3)
607    AC_ARG_ENABLE(instruments-db,
608      [  --disable-instruments-db
609                              Disable compilation of the sampler's instruments
610                              database feature. You need to have SQLite 3.3
611                              or younger installed for this feature.],
612      [config_instruments_db="$enableval"],
613      [config_instruments_db="yes"]
614    )
615    HAVE_SQLITE3=0;
616    if test "$config_instruments_db" = "yes"; then
617        # Check presence of sqlite3
618        sqlite_version="3.3"
619        PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
620        AC_SUBST(SQLITE3_LIBS)
621        AC_SUBST(SQLITE3_CFLAGS)
622        if test $HAVE_SQLITE3 = false; then
623            HAVE_SQLITE3=0
624            config_instruments_db="no"
625            echo "*** Required sqlite version not found!"
626            echo "*** You need to have sqlite version ${sqlite_version} or higher"
627            echo "*** for instruments database support to be enabled."
628            echo "*** Support for instruments DB will be disabled!"
629        else
630            HAVE_SQLITE3=1
631        fi
632    else
633        echo "Instruments DB feature disabled by configure script parameter"
634    fi
635    AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
636    AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
637    
638    
639    
640  ###########################################################################  ###########################################################################
641  # Handle Configuration Options  # Handle Configuration Options
642    
# Line 221  fi Line 644  fi
644    
645  AC_ARG_ENABLE(asm,  AC_ARG_ENABLE(asm,
646    [  --disable-asm    [  --disable-asm
647                            Disable hand-crafted assembly optimizations                            Enable hand-crafted assembly optimizations
648                            (default=on). LinuxSampler provides CPU specific                            (default=on). LinuxSampler provides CPU specific
649                            assembly optimizations for the most important                            assembly optimizations. This is currently limited
650                            synthesis algorithms. You usually don't want to                            to just enter a fast (denormal) FPU mode on x86
651                            disable that.],                            platforms. There are currently no synthesis core
652    [config_asm="no"],                            assembly optimizations anymore since LS 0.4.0],
653      [config_asm="$enableval"],
654    [config_asm="yes"]    [config_asm="yes"]
655  )  )
656  if test "$config_asm" = "yes"; then  if test "$config_asm" = "yes"; then
657    AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable hand-crafted asm optimizations.])    AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
658  fi  fi
659    
660  AC_ARG_ENABLE(dev-mode,  AC_ARG_ENABLE(dev-mode,
661    [  --enable-dev-mode    [  --enable-dev-mode
662                            Enable development mode (default=no). In that mode                            Enable development mode (default=off). In that mode
663                            we do some extra sanity checks here and there.                            we do some extra sanity checks here and there.
664                            This helps to spot possible problems, but reduces                            This helps to spot possible problems, but reduces
665                            efficiency a bit],                            efficiency a bit],
666    [config_dev_mode="yes"],    [config_dev_mode="$enableval"],
667    [config_dev_mode="no"]    [config_dev_mode="no"]
668  )  )
669  if test "$config_dev_mode" = "yes"; then  if test "$config_dev_mode" = "yes"; then
# Line 267  AC_ARG_ENABLE(rt-exceptions, Line 691  AC_ARG_ENABLE(rt-exceptions,
691                            context as well. Otherwise if disabled                            context as well. Otherwise if disabled
692                            segmentation faults will be forced by the                            segmentation faults will be forced by the
693                            application on critical errors.],                            application on critical errors.],
694    [config_rt_exceptions="yes"],    [config_rt_exceptions="$enableval"],
695    [config_rt_exceptions="no"]    [config_rt_exceptions="no"]
696  )  )
697  if test "$config_rt_exceptions" = "yes"; then  if test "$config_rt_exceptions" = "yes"; then
698    AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])    AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
699  fi  fi
700    
701    AC_ARG_ENABLE(pthread-testcancel,
702      [  --enable-pthread-testcancel
703                              Enable pthread_testcancel() calls and avoid asynchronous
704                              cancel of pthreads (default=no).],
705      [config_pthread_testcancel="$enableval"],
706      [config_pthread_testcancel="no"]
707    )
708    if test "$config_pthread_testcancel" = "yes"; then
709      AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
710    fi
711    
712  AC_ARG_ENABLE(preload-samples,  AC_ARG_ENABLE(preload-samples,
713    [  --enable-preload-samples    [  --enable-preload-samples
714                            Due to seeking and latency issues with hard drives                            Due to seeking and latency issues with hard drives
# Line 379  AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_ Line 814  AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_
814    
815  AC_ARG_ENABLE(max-streams,  AC_ARG_ENABLE(max-streams,
816    [  --enable-max-streams    [  --enable-max-streams
817                            Maximum amount of disk streams (default=90). This                            Initial maximum amount of disk streams
818                            value should always be higher than the maximum                            (default=90). This value can be changed at
819                            amount of voices.],                            runtime. It should always be higher than the
820                              maximum amount of voices.],
821    [config_max_streams="${enableval}"],    [config_max_streams="${enableval}"],
822    [config_max_streams="90"]    [config_max_streams="90"]
823  )  )
824  AC_DEFINE_UNQUOTED(CONFIG_MAX_STREAMS, $config_max_streams, [Define max. streams.])  AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
825    
826  AC_ARG_ENABLE(max-voices,  AC_ARG_ENABLE(max-voices,
827    [  --enable-max-voices    [  --enable-max-voices
828                            Maximum amount of voices (default=64). This value                            Initial maximum amount of voices (default=64).
829                            should always be lower than the maximum amount of                            This value can be changed at runtime. It should
830                            disk streams.],                            always be lower than the maximum amount of disk
831                              streams.],
832    [config_max_voices="${enableval}"],    [config_max_voices="${enableval}"],
833    [config_max_voices="64"]    [config_max_voices="64"]
834  )  )
835  AC_DEFINE_UNQUOTED(CONFIG_MAX_VOICES, $config_max_voices, [Define max. voices.])  AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
836    
837    AC_ARG_ENABLE(subfragment-size,
838      [  --enable-subfragment-size
839                              Every audio fragment will be splitted into
840                              subfragments. Where each subfragment renders
841                              audio with constant synthesis parameters. This is
842                              done for efficiency reasons. This parameter
843                              defines the default size of a subfragment in
844                              sample points. A large value means less CPU time
845                              whereas a low value means better audio quality
846                              (default=32).],
847      [config_subfragment_size="${enableval}"],
848      [config_subfragment_size="32"]
849    )
850    AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
851    
852    AC_ARG_ENABLE(global-attenuation-default,
853      [  --enable-global-attenuation-default
854                              To prevent clipping all samples will be lowered
855                              in amplitude by this given default factor (can
856                              be overridden at runtime).
857                              (default=0.35)],
858      [config_global_attenuation_default="${enableval}"],
859      [config_global_attenuation_default="0.35"]
860    )
861    AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
862    
863  AC_ARG_ENABLE(voice-steal-algo,  AC_ARG_ENABLE(voice-steal-algo,
864    [  --enable-voice-steal-algo    [  --enable-voice-steal-algo
# Line 430  AC_ARG_ENABLE(sysex-buffer-size, Line 893  AC_ARG_ENABLE(sysex-buffer-size,
893  )  )
894  AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])  AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
895    
 AC_ARG_ENABLE(filter-update-steps,  
   [  --enable-filter-update-steps  
                           Amount of sample points after which filter  
                           parameters (cutoff, resonance) are going to be  
                           updated (default=64). Higher value means less CPU  
                           load, but also worse parameter resolution, this  
                           value will be aligned to a power of two.],  
   [config_filter_update_steps="${enableval}"],  
   [config_filter_update_steps="64"]  
 )  
 AC_DEFINE_UNQUOTED(CONFIG_FILTER_UPDATE_STEPS, $config_filter_update_steps, [Define amount of steps to refresh filter coefficients.])  
   
896  AC_ARG_ENABLE(force-filter,  AC_ARG_ENABLE(force-filter,
897    [  --enable-force-filter    [  --enable-force-filter
898                            If enabled will force filter to be used even if                            If enabled will force filter to be used even if
899                            no usage was define in instrument patch files.                            no usage was define in instrument patch files.
900                            (default=no).],                            (default=no).],
901    [config_force_filter="yes"],    [config_force_filter="$enableval"],
902    [config_force_filter="no"]    [config_force_filter="no"]
903  )  )
904  if test "$config_force_filter" = "yes"; then  if test "$config_force_filter" = "yes"; then
# Line 537  AC_ARG_ENABLE(gs-checksum, Line 988  AC_ARG_ENABLE(gs-checksum,
988                            messages which do not provide a correct checksum                            messages which do not provide a correct checksum
989                            will be ignored. This is disabled by default as                            will be ignored. This is disabled by default as
990                            not all devices honor GS checksums.],                            not all devices honor GS checksums.],
991    [config_assert_gs_sysex_checksum="yes"],    [config_assert_gs_sysex_checksum="$enableval"],
992    [config_assert_gs_sysex_checksum="no"]    [config_assert_gs_sysex_checksum="no"]
993  )  )
994  if test "config_assert_gs_sysex_checksum" = "yes"; then  if test "config_assert_gs_sysex_checksum" = "yes"; then
995    AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])    AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
996  fi  fi
997    
998    AC_ARG_ENABLE(portamento-time-min,
999      [  --enable-portamento-time-min
1000                              Minimum Portamento time in seconds
1001                              (default=0.1).],
1002      [config_portamento_time_min="${enableval}"],
1003      [config_portamento_time_min="0.1"]
1004    )
1005    AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
1006    
1007    AC_ARG_ENABLE(portamento-time-max,
1008      [  --enable-portamento-time-max
1009                              Maximum Portamento time in seconds
1010                              (default=32).],
1011      [config_portamento_time_max="${enableval}"],
1012      [config_portamento_time_max="32"]
1013    )
1014    AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
1015    
1016    AC_ARG_ENABLE(portamento-time-default,
1017      [  --enable-portamento-time-default
1018                              Default Portamento time in seconds
1019                              (default=1).],
1020      [config_portamento_time_default="${enableval}"],
1021      [config_portamento_time_default="1"]
1022    )
1023    AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
1024    
1025    AC_ARG_ENABLE(signed-triang-algo,
1026      [  --enable-signed-triang-algo
1027                              Signed triangular wave algorithm to be used (e.g. for LFOs).
1028                              Currently available options:
1029                                intmath:
1030                                  Uses integer math without any branch will then be
1031                                  converted to floating point value for each sample point.
1032                                  This int->float conversion might hurt on some systems.
1033                                intmathabs:
1034                                  Similar to intmath but uses abs() function.
1035                                  Depending on compiler and platrofm this could
1036                                  perform better than integer math as it avoids
1037                                  an extra integer multiply instruction.
1038                                diharmonic:
1039                                  The triangular wave will be approximated by adding two
1040                                  sinusoidials. This solution might especially hurt on
1041                                  systems with weak floating point unit.
1042                                benchmark (default):
1043                                  This is not an algorithm. Use this option if the
1044                                  appropriate algorithm should be automatically
1045                                  chosen by the configure script by performing a
1046                                  benchmark between the algorithms mentioned above.
1047                                  This will NOT work for cross compilation!],
1048      [ if test ! "(" "${enableval}" = "intmath" \
1049                  -o "${enableval}" = "intmathabs" \
1050                  -o "${enableval}" = "diharmonic" ")" ; then
1051          AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
1052        else
1053          config_signed_triang_algo="${enableval}"
1054        fi
1055      ],
1056      [config_signed_triang_algo="benchmark"]
1057    )
1058    
1059    AC_ARG_ENABLE(unsigned-triang-algo,
1060      [  --enable-unsigned-triang-algo
1061                              Unsigned triangular wave algorithm to be used (e.g. for LFOs).
1062                              Currently available options:
1063                                intmath:
1064                                  Uses integer math without any branch will then be
1065                                  converted to floating point value for each sample point.
1066                                  This int->float conversion might hurt on some systems.
1067                                intmathabs:
1068                                  Similar to intmath but uses abs() function.
1069                                  Depending on compiler and platrofm this could
1070                                  perform better than integer math as it avoids
1071                                  an extra integer multiply instruction.
1072                                diharmonic:
1073                                  The triangular wave will be approximated by adding two
1074                                  sinusoidials. This solution might especially hurt on
1075                                  systems with weak floating point unit.
1076                                benchmark (default):
1077                                  This is not an algorithm. Use this option if the
1078                                  appropriate algorithm should be automatically
1079                                  chosen by the configure script by performing a
1080                                  benchmark between the algorithms mentioned above.
1081                                  This will NOT work for cross compilation!],
1082      [ if test ! "(" "${enableval}" = "intmath" \
1083                  -o "${enableval}" = "intmathabs" \
1084                  -o "${enableval}" = "diharmonic" ")" ; then
1085          AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
1086        else
1087          config_unsigned_triang_algo="${enableval}"
1088        fi
1089      ],
1090      [config_unsigned_triang_algo="benchmark"]
1091    )
1092    
1093    AC_ARG_ENABLE(process-muted-channels,
1094      [  --enable-process-muted-channels
1095                              Enable processing of muted channels (default=no).
1096                              In that mode all MIDI events in the muted channels
1097                              will be processed. This will provide information
1098                              about the active voices in the muted channels and
1099                              will not discard notes, triggered in mute mode,
1100                              when the channel is unmuted. But also will reduce
1101                              the efficiency.],
1102      [config_process_muted_channels="$enableval"],
1103      [config_process_muted_channels="no"]
1104    )
1105    if test "$config_process_muted_channels" = "yes"; then
1106      AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
1107    fi
1108    
1109    AC_ARG_ENABLE(process-all-notes-off,
1110      [  --disable-process-all-notes-off
1111                              Disable interpretation of All-Notes-Off MIDI
1112                              messages (default=on). By default LS will release
1113                              all voices whenever it receives an All-Notes-Off
1114                              MIDI message. You can disable this behavior, so
1115                              that LS simply ignores such messages.],
1116      [config_process_all_notes_off="$enableval"],
1117      [config_process_all_notes_off="yes"]
1118    )
1119    if test "$config_process_all_notes_off" = "yes"; then
1120      AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
1121    fi
1122    
1123    AC_ARG_ENABLE(interpolate-volume,
1124      [  --disable-interpolate-volume
1125                              Disable interpolation of volume modulation
1126                              (default=on). With this enabled, the volume changes
1127                              generated by for example the envelope generator
1128                              will be smoother, minimizing the risk for audio
1129                              clicks. Disable it to reduce CPU usage.],
1130      [config_interpolate_volume="$enableval"],
1131      [config_interpolate_volume="yes"]
1132    )
1133    if test "$config_interpolate_volume" = "yes"; then
1134      AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
1135    fi
1136    
1137    AC_ARG_ENABLE(master-volume-sysex-by-port,
1138      [  --enable-master-volume-sysex-by-port
1139                              Whether global volume sysex message should be
1140                              applied globally to the whole sampler or only to
1141                              the sampler channels connected to the same MIDI
1142                              input port on which the sysex message arrived on.
1143                              By default global volume sysex messages apply
1144                              globally to the whole sampler, since many MIDI
1145                              devices behave that way.],
1146      [config_master_volume_sysex_by_port="$enableval"],
1147      [config_master_volume_sysex_by_port="no"]
1148    )
1149    if test "$config_master_volume_sysex_by_port" = "yes"; then
1150      AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
1151    fi
1152    
1153    AC_ARG_ENABLE(plugin-dir,
1154      [  --enable-plugin-dir
1155                              Directory where the sampler shall look for potential plugins,
1156                              that is 3rd party shared libraries that should be loaded by
1157                              the sampler on startup. By default the sampler will search
1158                              for plugins in the subdirectory "plugins" below its own
1159                              library directory.
1160                              (i.e. /usr/local/lib/linuxsampler/plugins)],
1161      [config_plugin_dir="${enableval}"],
1162      [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1163    )
1164    AC_SUBST(config_plugin_dir)
1165    
1166    AC_ARG_ENABLE(default-instruments-db-location,
1167      [  --enable-default-instruments-db-location
1168                              Only when instruments DB feature is enabled: file name
1169                              which shall be taken as default location of the
1170                              instruments DB file. This location can still be
1171                              overridden at runtime with a command line switch.
1172                              (default: /var/lib/linuxsampler/instruments.db)],
1173      [config_default_instruments_db_file="${enableval}"],
1174      [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1175    )
1176    AC_DEFINE_UNQUOTED(
1177        CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1178        "$config_default_instruments_db_file",
1179        [Only when instruments DB feature is enabled: default location of the DB file.]
1180    )
1181    AC_SUBST(config_default_instruments_db_file)
1182    
1183    
1184    ###########################################################################
1185    # Automatic Benchmarks (to detect the best algorithms for the system)
1186    
1187    AC_LANG_SAVE
1188    
1189    if test "$config_signed_triang_algo" = "benchmark"; then
1190        echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1191        AC_LANG_CPLUSPLUS
1192        AC_TRY_RUN([
1193                #define SIGNED 1
1194                #define SILENT 1
1195                #include "${srcdir}/benchmarks/triang.cpp"
1196            ],
1197            triang_signed=0,
1198            triang_signed=$?,
1199            triang_signed=0
1200        )
1201        if test "$triang_signed" = "2"; then
1202            config_signed_triang_algo="intmath"
1203            echo "integer math"
1204        elif test "$triang_signed" = "3"; then
1205            config_signed_triang_algo="diharmonic"
1206            echo "di harmonics"
1207        elif test "$triang_signed" = "5"; then
1208            config_signed_triang_algo="intmathabs"
1209            echo "integer math using abs()"
1210        else
1211            echo "Benchmark of signed triangular wave algorithms failed!"
1212            echo "Maybe you are doing cross compilation? In that case you have to select"
1213            echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1214            echo "Call './configure --help' for further information or read configure.in."
1215            exit -1;
1216        fi
1217    else
1218        case "$config_signed_triang_algo" in
1219            intmath)
1220                triang_signed=2 ;;
1221            diharmonic)
1222                triang_signed=3 ;;
1223            intmathabs)
1224                triang_signed=5 ;;
1225        esac
1226    fi
1227    AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1228    
1229    if test "$config_unsigned_triang_algo" = "benchmark"; then
1230        echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1231        AC_LANG_CPLUSPLUS
1232        AC_TRY_RUN([
1233                #define SIGNED 0
1234                #define SILENT 1
1235                #include "${srcdir}/benchmarks/triang.cpp"
1236            ],
1237            triang_unsigned=0,
1238            triang_unsigned=$?,
1239            triang_unsigned=0
1240        )
1241        if test "$triang_unsigned" = "2"; then
1242            config_unsigned_triang_algo="intmath"
1243            echo "integer math"
1244        elif test "$triang_unsigned" = "3"; then
1245            config_unsigned_triang_algo="diharmonic"
1246            echo "di harmonics"
1247        elif test "$triang_unsigned" = "5"; then
1248            config_unsigned_triang_algo="intmathabs"
1249            echo "integer math using abs()"
1250        else
1251            echo "Benchmark of unsigned triangular wave algorithms failed!"
1252            echo "Maybe you are doing cross compilation? In that case you have to select"
1253            echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1254            echo "Call './configure --help' for further information or read configure.in."
1255            exit -1;
1256        fi
1257    else
1258        case "$config_unsigned_triang_algo" in
1259            intmath)
1260                triang_unsigned=2 ;;
1261            diharmonic)
1262                triang_unsigned=3 ;;
1263            intmathabs)
1264                triang_unsigned=5 ;;
1265        esac
1266    fi
1267    AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1268    
1269    AC_LANG_RESTORE
1270    
1271    
1272  ###########################################################################  ###########################################################################
1273  # Create Build Files  # Create Build Files
1274    
1275  AM_CONFIG_HEADER(config.h)  AM_CONFIG_HEADER(config.h)
1276  AM_INIT_AUTOMAKE(linuxsampler, 0.3.2)  AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1277    
1278  AC_LANG_CPLUSPLUS  AC_LANG_CPLUSPLUS
 AC_PROG_CXX  
   
 # some gcc 4.0 versions need -msse for SSE register allocations  
 if test "$config_asm" = "yes"; then  
   if test "$def_arch_x86" = 1; then  
     CXXFLAGS="$CXXFLAGS -msse"  
   fi  
 fi  
1279    
1280  # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like  # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1281  # this, the dlfcn.h check in am_prog_libtool may fail.  # this, the dlfcn.h check in am_prog_libtool may fail.
1282  AC_CHECK_HEADER(stdlib.h)  AC_CHECK_HEADER(stdlib.h)
1283    
 AM_PROG_LIBTOOL  
   
1284  AC_OUTPUT( \  AC_OUTPUT( \
1285      Makefile \      Makefile \
1286      man/Makefile \      man/Makefile \
1287      man/linuxsampler.1 \      man/linuxsampler.1 \
1288      src/Makefile \      src/Makefile \
1289        src/db/Makefile \
1290      src/network/Makefile \      src/network/Makefile \
1291      src/engines/Makefile \      src/engines/Makefile \
1292      src/engines/gig/Makefile \      src/engines/gig/Makefile \
1293        src/engines/sf2/Makefile \
1294        src/engines/sfz/Makefile \
1295      src/engines/common/Makefile \      src/engines/common/Makefile \
1296      src/common/Makefile src/lib/Makefile \      src/effects/Makefile \
1297      src/lib/fileloader/Makefile \      src/common/Makefile \
     src/lib/fileloader/libgig/Makefile \  
1298      src/testcases/Makefile \      src/testcases/Makefile \
1299      src/drivers/Makefile \      src/drivers/Makefile \
1300      src/drivers/audio/Makefile \      src/drivers/audio/Makefile \
1301      src/drivers/midi/Makefile \      src/drivers/midi/Makefile \
1302        src/plugins/Makefile \
1303        src/hostplugins/Makefile \
1304        src/hostplugins/dssi/Makefile \
1305        src/hostplugins/lv2/Makefile \
1306        src/hostplugins/vst/Makefile \
1307        src/hostplugins/au/Makefile \
1308      linuxsampler.spec \      linuxsampler.spec \
1309      debian/Makefile \      debian/Makefile \
1310      Artwork/Makefile \      Artwork/Makefile \
1311      scripts/Makefile \      scripts/Makefile \
1312      osx/Makefile \      osx/Makefile \
1313      osx/LinuxSampler.xcode/Makefile \      osx/linuxsampler.xcodeproj/Makefile \
1314      Documentation/Makefile \      Documentation/Makefile \
1315      Documentation/Engines/Makefile \      Documentation/Engines/Makefile \
1316      Documentation/Engines/gig/Makefile \      Documentation/Engines/gig/Makefile \
1317        linuxsampler.pc \
1318        Doxyfile \
1319  )  )
1320    
1321    # resolve all nested variables in '${config_plugin_dir}'
1322    # (merely for providing a human readable summary below)
1323    while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1324            config_plugin_dir=`eval echo ${config_plugin_dir}`
1325    done
1326    
1327    
1328  ###########################################################################  ###########################################################################
1329  # Output All Configuration Options  # Output All Configuration Options
# Line 602  echo "" Line 1332  echo ""
1332  echo "#####################################################################"  echo "#####################################################################"
1333  echo "# LinuxSampler Configuration                                        #"  echo "# LinuxSampler Configuration                                        #"
1334  echo "#-------------------------------------------------------------------#"  echo "#-------------------------------------------------------------------#"
1335    echo "# Release Version: ${LINUXSAMPLER_RELEASE_MAJOR}.${LINUXSAMPLER_RELEASE_MINOR}.${LINUXSAMPLER_RELEASE_BUILD}"
1336    echo "# LSCP Version: ${LSCP_RELEASE_MAJOR}.${LSCP_RELEASE_MINOR}"
1337    echo "#-------------------------------------------------------------------"
1338  echo "# Assembly Optimizations: ${config_asm}"  echo "# Assembly Optimizations: ${config_asm}"
1339  echo "# Development Mode: ${config_dev_mode}"  echo "# Development Mode: ${config_dev_mode}"
1340  echo "# Debug Level: ${config_debug_level}"  echo "# Debug Level: ${config_debug_level}"
# Line 615  echo "# Streams to be refilled per Disk Line 1348  echo "# Streams to be refilled per Disk
1348  echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"  echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1349  echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"  echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1350  echo "# Stream Size: ${config_stream_size}"  echo "# Stream Size: ${config_stream_size}"
1351  echo "# Maximum Disk Streams: ${config_max_streams}"  echo "# Default Maximum Disk Streams: ${config_max_streams}"
1352  echo "# Maximum Voices: ${config_max_voices}"  echo "# Default Maximum Voices: ${config_max_voices}"
1353    echo "# Default Subfragment Size: ${config_subfragment_size}"
1354    echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1355  echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"  echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1356    echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1357    echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1358  echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"  echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1359  echo "# Filter Update Steps: ${config_filter_update_steps}"  echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1360    echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1361    echo "# Default Portamento Time: ${config_portamento_time_default} s"
1362  echo "# Force Filter Usage: ${config_force_filter}"  echo "# Force Filter Usage: ${config_force_filter}"
1363  echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"  echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1364  echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"  echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
# Line 627  echo "# Override Filter Cutoff Controlle Line 1366  echo "# Override Filter Cutoff Controlle
1366  echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"  echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1367  echo "# Override Filter Type: ${config_override_filter_type}"  echo "# Override Filter Type: ${config_override_filter_type}"
1368  echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"  echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1369    echo "# Process Muted Channels: ${config_process_muted_channels}"
1370    echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1371    echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
1372    echo "# Interpolate Volume: ${config_interpolate_volume}"
1373    echo "# Instruments database support: ${config_instruments_db}"
1374    if test "$config_instruments_db" = "yes"; then
1375    echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1376    fi
1377    echo "# Plugin Path: ${config_plugin_dir}"
1378    echo "#-------------------------------------------------------------------"
1379    echo "# MIDI Input Drivers:"
1380    echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack_midi}, CoreMIDI: ${config_have_coremidi}, MME: ${config_have_mme}, MidiShare: ${config_have_midishare}"
1381    echo "#-------------------------------------------------------------------"
1382    echo "# Audio Output Drivers:"
1383    echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack}, ARTS: ${config_have_arts}, CoreAudio: ${config_have_coreaudio}, ASIO: ${config_have_asio}"
1384    echo "#-------------------------------------------------------------------"
1385    echo "# Sampler Engines:"
1386    echo "# GIG: yes, SF2: ${config_have_sf2}, SFZ: yes"
1387    echo "#-------------------------------------------------------------------"
1388    echo "# Building sampler as plugin for following host standards:"
1389    echo "# DSSI: ${config_have_dssi}, LV2: ${config_have_lv2}, VST: ${config_have_vst}, AU: ${config_have_au}"
1390  echo "#-------------------------------------------------------------------#"  echo "#-------------------------------------------------------------------#"
1391  echo "# Read './configure --help' or file 'configure.in' for details.     #"  echo "# Read './configure --help' or file 'configure.in' for details.     #"
1392  echo "#####################################################################"  echo "#####################################################################"

Legend:
Removed from v.685  
changed lines
  Added in v.2119

  ViewVC Help
Powered by ViewVC