/[svn]/web/trunk/www.linuxsampler.org/api/draft-linuxsampler-protocol.txt
ViewVC logotype

Diff of /web/trunk/www.linuxsampler.org/api/draft-linuxsampler-protocol.txt

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 1006 by schoenebeck, Fri Dec 29 20:27:15 2006 UTC revision 1731 by iliev, Fri May 2 13:03:00 2008 UTC
# Line 4  Line 4 
4  LinuxSampler Developers                                   C. Schoenebeck  LinuxSampler Developers                                   C. Schoenebeck
5  Internet-Draft                           Interessengemeinschaft Software  Internet-Draft                           Interessengemeinschaft Software
6  Intended status: Standards Track                       Engineering e. V.  Intended status: Standards Track                       Engineering e. V.
7  Expires: July 2, 2007                                  December 29, 2006  Expires: October 3, 2008                                      April 2008
8    
9    
10                       LinuxSampler Control Protocol                       LinuxSampler Control Protocol
11                                  LSCP 1.2                                  LSCP 1.4
12    
13  Status of this Memo  Status of this Memo
14    
# Line 33  Status of this Memo Line 33  Status of this Memo
33     The list of Internet-Draft Shadow Directories can be accessed at     The list of Internet-Draft Shadow Directories can be accessed at
34     http://www.ietf.org/shadow.html.     http://www.ietf.org/shadow.html.
35    
36     This Internet-Draft will expire on July 2, 2007.     This Internet-Draft will expire on October 3, 2008.
37    
 Copyright Notice  
38    
    Copyright (C) The Internet Society (2006).  
39    
40    
41    
# Line 52  Copyright Notice Line 50  Copyright Notice
50    
51    
52    
53  Schoenebeck               Expires July 2, 2007                  [Page 1]  
54    
55    Schoenebeck              Expires October 3, 2008                [Page 1]
56    
57  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
58    
59    
60  Abstract  Abstract
# Line 68  Abstract Line 68  Abstract
68    
69  Table of Contents  Table of Contents
70    
71     1.  Requirements notation . . . . . . . . . . . . . . . . . . . .   5     1.  Requirements notation . . . . . . . . . . . . . . . . . . . .   6
72     2.  Versioning of this specification  . . . . . . . . . . . . . .   6     2.  Versioning of this specification  . . . . . . . . . . . . . .   7
73     3.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   7     3.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   8
74     4.  Focus of this protocol  . . . . . . . . . . . . . . . . . . .   8     4.  Focus of this protocol  . . . . . . . . . . . . . . . . . . .   9
75     5.  Communication Overview  . . . . . . . . . . . . . . . . . . .   9     5.  Communication Overview  . . . . . . . . . . . . . . . . . . .  10
76       5.1.  Request/response communication method . . . . . . . . . .   9       5.1.  Request/response communication method . . . . . . . . . .  10
77         5.1.1.  Result format . . . . . . . . . . . . . . . . . . . .  10         5.1.1.  Result format . . . . . . . . . . . . . . . . . . . .  11
78       5.2.  Subscribe/notify communication method . . . . . . . . . .  12       5.2.  Subscribe/notify communication method . . . . . . . . . .  13
79     6.  Description for control commands  . . . . . . . . . . . . . .  14     6.  Description for control commands  . . . . . . . . . . . . . .  15
80       6.1.  Ignored lines and comments  . . . . . . . . . . . . . . .  14       6.1.  Ignored lines and comments  . . . . . . . . . . . . . . .  15
81       6.2.  Configuring audio drivers . . . . . . . . . . . . . . . .  14       6.2.  Configuring audio drivers . . . . . . . . . . . . . . . .  15
82         6.2.1.  Getting amount of available audio output drivers  . .  15         6.2.1.  Getting amount of available audio output drivers  . .  16
83         6.2.2.  Getting all available audio output drivers  . . . . .  15         6.2.2.  Getting all available audio output drivers  . . . . .  16
84         6.2.3.  Getting information about a specific audio output         6.2.3.  Getting information about a specific audio output
85                 driver  . . . . . . . . . . . . . . . . . . . . . . .  15                 driver  . . . . . . . . . . . . . . . . . . . . . . .  16
86         6.2.4.  Getting information about specific audio output         6.2.4.  Getting information about specific audio output
87                 driver parameter  . . . . . . . . . . . . . . . . . .  16                 driver parameter  . . . . . . . . . . . . . . . . . .  17
88         6.2.5.  Creating an audio output device . . . . . . . . . . .  20         6.2.5.  Creating an audio output device . . . . . . . . . . .  21
89         6.2.6.  Destroying an audio output device . . . . . . . . . .  21         6.2.6.  Destroying an audio output device . . . . . . . . . .  22
90         6.2.7.  Getting all created audio output device count . . . .  22         6.2.7.  Getting all created audio output device count . . . .  23
91         6.2.8.  Getting all created audio output device list  . . . .  22         6.2.8.  Getting all created audio output device list  . . . .  23
92         6.2.9.  Getting current settings of an audio output device  .  22         6.2.9.  Getting current settings of an audio output device  .  23
93         6.2.10. Changing settings of audio output devices . . . . . .  24         6.2.10. Changing settings of audio output devices . . . . . .  25
94         6.2.11. Getting information about an audio channel  . . . . .  25         6.2.11. Getting information about an audio channel  . . . . .  26
95         6.2.12. Getting information about specific audio channel         6.2.12. Getting information about specific audio channel
96                 parameter . . . . . . . . . . . . . . . . . . . . . .  26                 parameter . . . . . . . . . . . . . . . . . . . . . .  27
97         6.2.13. Changing settings of audio output channels  . . . . .  28         6.2.13. Changing settings of audio output channels  . . . . .  29
98       6.3.  Configuring MIDI input drivers  . . . . . . . . . . . . .  29       6.3.  Configuring MIDI input drivers  . . . . . . . . . . . . .  30
99         6.3.1.  Getting amount of available MIDI input drivers  . . .  30         6.3.1.  Getting amount of available MIDI input drivers  . . .  31
100         6.3.2.  Getting all available MIDI input drivers  . . . . . .  30         6.3.2.  Getting all available MIDI input drivers  . . . . . .  31
101         6.3.3.  Getting information about a specific MIDI input         6.3.3.  Getting information about a specific MIDI input
102                 driver  . . . . . . . . . . . . . . . . . . . . . . .  31                 driver  . . . . . . . . . . . . . . . . . . . . . . .  32
103         6.3.4.  Getting information about specific MIDI input         6.3.4.  Getting information about specific MIDI input
104                 driver parameter  . . . . . . . . . . . . . . . . . .  32                 driver parameter  . . . . . . . . . . . . . . . . . .  33
105         6.3.5.  Creating a MIDI input device  . . . . . . . . . . . .  34         6.3.5.  Creating a MIDI input device  . . . . . . . . . . . .  35
106         6.3.6.  Destroying a MIDI input device  . . . . . . . . . . .  35         6.3.6.  Destroying a MIDI input device  . . . . . . . . . . .  36
107         6.3.7.  Getting all created MIDI input device count . . . . .  36         6.3.7.  Getting all created MIDI input device count . . . . .  37
108    
109    
110    
111  Schoenebeck               Expires July 2, 2007                  [Page 2]  Schoenebeck              Expires October 3, 2008                [Page 2]
112    
113  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
114    
115    
116         6.3.8.  Getting all created MIDI input device list  . . . . .  36         6.3.8.  Getting all created MIDI input device list  . . . . .  37
117         6.3.9.  Getting current settings of a MIDI input device . . .  37         6.3.9.  Getting current settings of a MIDI input device . . .  38
118         6.3.10. Changing settings of MIDI input devices . . . . . . .  38         6.3.10. Changing settings of MIDI input devices . . . . . . .  39
119         6.3.11. Getting information about a MIDI port . . . . . . . .  38         6.3.11. Getting information about a MIDI port . . . . . . . .  39
120         6.3.12. Getting information about specific MIDI port         6.3.12. Getting information about specific MIDI port
121                 parameter . . . . . . . . . . . . . . . . . . . . . .  39                 parameter . . . . . . . . . . . . . . . . . . . . . .  40
122         6.3.13. Changing settings of MIDI input ports . . . . . . . .  41         6.3.13. Changing settings of MIDI input ports . . . . . . . .  42
123       6.4.  Configuring sampler channels  . . . . . . . . . . . . . .  42       6.4.  Configuring sampler channels  . . . . . . . . . . . . . .  43
124         6.4.1.  Loading an instrument . . . . . . . . . . . . . . . .  42         6.4.1.  Loading an instrument . . . . . . . . . . . . . . . .  43
125         6.4.2.  Loading a sampler engine  . . . . . . . . . . . . . .  43         6.4.2.  Loading a sampler engine  . . . . . . . . . . . . . .  44
126         6.4.3.  Getting all created sampler channel count . . . . . .  44         6.4.3.  Getting all created sampler channel count . . . . . .  45
127         6.4.4.  Getting all created sampler channel list  . . . . . .  44         6.4.4.  Getting all created sampler channel list  . . . . . .  46
128         6.4.5.  Adding a new sampler channel  . . . . . . . . . . . .  44         6.4.5.  Adding a new sampler channel  . . . . . . . . . . . .  46
129         6.4.6.  Removing a sampler channel  . . . . . . . . . . . . .  45         6.4.6.  Removing a sampler channel  . . . . . . . . . . . . .  47
130         6.4.7.  Getting amount of available engines . . . . . . . . .  46         6.4.7.  Getting amount of available engines . . . . . . . . .  48
131         6.4.8.  Getting all available engines . . . . . . . . . . . .  46         6.4.8.  Getting all available engines . . . . . . . . . . . .  48
132         6.4.9.  Getting information about an engine . . . . . . . . .  47         6.4.9.  Getting information about an engine . . . . . . . . .  48
133         6.4.10. Getting sampler channel information . . . . . . . . .  48         6.4.10. Getting sampler channel information . . . . . . . . .  49
134         6.4.11. Current number of active voices . . . . . . . . . . .  51         6.4.11. Current number of active voices . . . . . . . . . . .  52
135         6.4.12. Current number of active disk streams . . . . . . . .  51         6.4.12. Current number of active disk streams . . . . . . . .  53
136         6.4.13. Current fill state of disk stream buffers . . . . . .  52         6.4.13. Current fill state of disk stream buffers . . . . . .  53
137         6.4.14. Setting audio output device . . . . . . . . . . . . .  53         6.4.14. Setting audio output device . . . . . . . . . . . . .  54
138         6.4.15. Setting audio output type . . . . . . . . . . . . . .  53         6.4.15. Setting audio output type . . . . . . . . . . . . . .  55
139         6.4.16. Setting audio output channel  . . . . . . . . . . . .  54         6.4.16. Setting audio output channel  . . . . . . . . . . . .  56
140         6.4.17. Setting MIDI input device . . . . . . . . . . . . . .  55         6.4.17. Setting MIDI input device . . . . . . . . . . . . . .  56
141         6.4.18. Setting MIDI input type . . . . . . . . . . . . . . .  56         6.4.18. Setting MIDI input type . . . . . . . . . . . . . . .  57
142         6.4.19. Setting MIDI input port . . . . . . . . . . . . . . .  56         6.4.19. Setting MIDI input port . . . . . . . . . . . . . . .  58
143         6.4.20. Setting MIDI input channel  . . . . . . . . . . . . .  57         6.4.20. Setting MIDI input channel  . . . . . . . . . . . . .  58
144         6.4.21. Setting channel volume  . . . . . . . . . . . . . . .  58         6.4.21. Setting channel volume  . . . . . . . . . . . . . . .  59
145         6.4.22. Muting a sampler channel  . . . . . . . . . . . . . .  58         6.4.22. Muting a sampler channel  . . . . . . . . . . . . . .  60
146         6.4.23. Soloing a sampler channel . . . . . . . . . . . . . .  59         6.4.23. Soloing a sampler channel . . . . . . . . . . . . . .  61
147         6.4.24. Assigning a MIDI instrument map to a sampler         6.4.24. Assigning a MIDI instrument map to a sampler
148                 channel . . . . . . . . . . . . . . . . . . . . . . .  60                 channel . . . . . . . . . . . . . . . . . . . . . . .  61
149         6.4.25. Adding an effect send to a sampler channel  . . . . .  61         6.4.25. Adding an effect send to a sampler channel  . . . . .  62
150         6.4.26. Removing an effect send from a sampler channel  . . .  62         6.4.26. Removing an effect send from a sampler channel  . . .  64
151         6.4.27. Getting amount of effect sends on a sampler channel .  63         6.4.27. Getting amount of effect sends on a sampler channel .  64
152         6.4.28. Listing all effect sends on a sampler channel . . . .  63         6.4.28. Listing all effect sends on a sampler channel . . . .  65
153         6.4.29. Getting effect send information . . . . . . . . . . .  64         6.4.29. Getting effect send information . . . . . . . . . . .  65
154         6.4.30. Altering effect send's audio routing  . . . . . . . .  65         6.4.30. Changing effect send's name . . . . . . . . . . . . .  67
155         6.4.31. Resetting a sampler channel . . . . . . . . . . . . .  66         6.4.31. Altering effect send's audio routing  . . . . . . . .  67
156       6.5.  Controlling connection  . . . . . . . . . . . . . . . . .  66         6.4.32. Altering effect send's MIDI controller  . . . . . . .  68
157         6.5.1.  Register front-end for receiving event messages . . .  66         6.4.33. Altering effect send's send level . . . . . . . . . .  69
158           6.4.34. Resetting a sampler channel . . . . . . . . . . . . .  70
159         6.5.  Controlling connection  . . . . . . . . . . . . . . . . .  71
160           6.5.1.  Register front-end for receiving event messages . . .  71
161         6.5.2.  Unregister front-end for not receiving event         6.5.2.  Unregister front-end for not receiving event
162                 messages  . . . . . . . . . . . . . . . . . . . . . .  67                 messages  . . . . . . . . . . . . . . . . . . . . . .  71
163         6.5.3.  Enable or disable echo of commands  . . . . . . . . .  68         6.5.3.  Enable or disable echo of commands  . . . . . . . . .  72
        6.5.4.  Close client connection . . . . . . . . . . . . . . .  68  
      6.6.  Global commands . . . . . . . . . . . . . . . . . . . . .  69  
        6.6.1.  Current number of active voices . . . . . . . . . . .  69  
164    
165    
166    
167  Schoenebeck               Expires July 2, 2007                  [Page 3]  Schoenebeck              Expires October 3, 2008                [Page 3]
168    
169  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
   
   
        6.6.2.  Maximum amount of active voices . . . . . . . . . . .  69  
        6.6.3.  Reset sampler . . . . . . . . . . . . . . . . . . . .  69  
        6.6.4.  General sampler informations  . . . . . . . . . . . .  70  
        6.6.5.  Getting global volume attenuation . . . . . . . . . .  70  
        6.6.6.  Setting global volume attenuation . . . . . . . . . .  71  
      6.7.  MIDI Instrument Mapping . . . . . . . . . . . . . . . . .  71  
        6.7.1.  Create a new MIDI instrument map  . . . . . . . . . .  72  
        6.7.2.  Delete one particular or all MIDI instrument maps . .  73  
        6.7.3.  Get amount of existing MIDI instrument maps . . . . .  73  
        6.7.4.  Getting all created MIDI instrument maps  . . . . . .  74  
        6.7.5.  Getting MIDI instrument map information . . . . . . .  74  
        6.7.6.  Renaming a MIDI instrument map  . . . . . . . . . . .  75  
        6.7.7.  Create or replace a MIDI instrument map entry . . . .  75  
        6.7.8.  Getting ammount of MIDI instrument map entries  . . .  78  
        6.7.9.  Getting indeces of all entries of a MIDI  
                instrument map  . . . . . . . . . . . . . . . . . . .  79  
        6.7.10. Remove an entry from the MIDI instrument map  . . . .  79  
        6.7.11. Get current settings of MIDI instrument map entry . .  80  
        6.7.12. Clear MIDI instrument map . . . . . . . . . . . . . .  82  
    7.  Command Syntax  . . . . . . . . . . . . . . . . . . . . . . .  83  
    8.  Events  . . . . . . . . . . . . . . . . . . . . . . . . . . .  94  
      8.1.  Number of audio output devices changed  . . . . . . . . .  94  
      8.2.  Audio output device's settings changed  . . . . . . . . .  94  
      8.3.  Number of MIDI input devices changed  . . . . . . . . . .  94  
      8.4.  MIDI input device's settings changed  . . . . . . . . . .  95  
      8.5.  Number of sampler channels changed  . . . . . . . . . . .  95  
      8.6.  Number of active voices changed . . . . . . . . . . . . .  95  
      8.7.  Number of active disk streams changed . . . . . . . . . .  96  
      8.8.  Disk stream buffer fill state changed . . . . . . . . . .  96  
      8.9.  Channel information changed . . . . . . . . . . . . . . .  96  
      8.10. Total number of active voices changed . . . . . . . . . .  97  
      8.11. Number of MIDI instrument maps changed  . . . . . . . . .  97  
      8.12. MIDI instrument map information changed . . . . . . . . .  97  
      8.13. Number of MIDI instruments changed  . . . . . . . . . . .  98  
      8.14. MIDI instrument information changed . . . . . . . . . . .  98  
      8.15. Miscellaneous and debugging events  . . . . . . . . . . .  99  
    9.  Security Considerations . . . . . . . . . . . . . . . . . . . 100  
    10. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 101  
    11. References  . . . . . . . . . . . . . . . . . . . . . . . . . 102  
    Author's Address  . . . . . . . . . . . . . . . . . . . . . . . . 103  
    Intellectual Property and Copyright Statements  . . . . . . . . . 104  
170    
171    
172           6.5.4.  Close client connection . . . . . . . . . . . . . . .  73
173         6.6.  Global commands . . . . . . . . . . . . . . . . . . . . .  73
174           6.6.1.  Current number of active voices . . . . . . . . . . .  73
175           6.6.2.  Maximum amount of active voices . . . . . . . . . . .  73
176           6.6.3.  Current number of active disk streams . . . . . . . .  74
177           6.6.4.  Reset sampler . . . . . . . . . . . . . . . . . . . .  74
178           6.6.5.  General sampler informations  . . . . . . . . . . . .  74
179           6.6.6.  Getting global volume attenuation . . . . . . . . . .  75
180           6.6.7.  Setting global volume attenuation . . . . . . . . . .  75
181         6.7.  MIDI Instrument Mapping . . . . . . . . . . . . . . . . .  76
182           6.7.1.  Create a new MIDI instrument map  . . . . . . . . . .  77
183           6.7.2.  Delete one particular or all MIDI instrument maps . .  77
184           6.7.3.  Get amount of existing MIDI instrument maps . . . . .  78
185           6.7.4.  Getting all created MIDI instrument maps  . . . . . .  78
186           6.7.5.  Getting MIDI instrument map information . . . . . . .  79
187           6.7.6.  Renaming a MIDI instrument map  . . . . . . . . . . .  80
188           6.7.7.  Create or replace a MIDI instrument map entry . . . .  80
189           6.7.8.  Getting ammount of MIDI instrument map entries  . . .  83
190           6.7.9.  Getting indeces of all entries of a MIDI
191                   instrument map  . . . . . . . . . . . . . . . . . . .  84
192           6.7.10. Remove an entry from the MIDI instrument map  . . . .  84
193           6.7.11. Get current settings of MIDI instrument map entry . .  85
194           6.7.12. Clear MIDI instrument map . . . . . . . . . . . . . .  87
195         6.8.  Managing Instruments Database . . . . . . . . . . . . . .  88
196           6.8.1.  Creating a new instrument directory . . . . . . . . .  88
197           6.8.2.  Deleting an instrument directory  . . . . . . . . . .  88
198           6.8.3.  Getting amount of instrument directories  . . . . . .  89
199           6.8.4.  Listing all directories in specific directory . . . .  90
200           6.8.5.  Getting instrument directory information  . . . . . .  90
201           6.8.6.  Renaming an instrument directory  . . . . . . . . . .  91
202           6.8.7.  Moving an instrument directory  . . . . . . . . . . .  92
203           6.8.8.  Copying instrument directories  . . . . . . . . . . .  93
204           6.8.9.  Changing the description of directory . . . . . . . .  93
205           6.8.10. Finding directories . . . . . . . . . . . . . . . . .  94
206           6.8.11. Adding instruments to the instruments database  . . .  95
207           6.8.12. Removing an instrument  . . . . . . . . . . . . . . .  97
208           6.8.13. Getting amount of instruments . . . . . . . . . . . .  97
209           6.8.14. Listing all instruments in specific directory . . . .  98
210           6.8.15. Getting instrument information  . . . . . . . . . . .  99
211           6.8.16. Renaming an instrument  . . . . . . . . . . . . . . . 101
212           6.8.17. Moving an instrument  . . . . . . . . . . . . . . . . 102
213           6.8.18. Copying instruments . . . . . . . . . . . . . . . . . 102
214           6.8.19. Changing the description of instrument  . . . . . . . 103
215           6.8.20. Finding instruments . . . . . . . . . . . . . . . . . 103
216           6.8.21. Getting job status information  . . . . . . . . . . . 106
217           6.8.22. Formatting the instruments database . . . . . . . . . 107
218           6.8.23. Checking for lost instrument files  . . . . . . . . . 107
219           6.8.24. Replacing an instrument file  . . . . . . . . . . . . 108
220    
221    
222    
223    Schoenebeck              Expires October 3, 2008                [Page 4]
224    
225    Internet-Draft        LinuxSampler Control Protocol           April 2008
226    
227    
228         6.9.  Editing Instruments . . . . . . . . . . . . . . . . . . . 108
229           6.9.1.  Opening an appropriate instrument editor
230                   application . . . . . . . . . . . . . . . . . . . . . 109
231         6.10. Managing Files  . . . . . . . . . . . . . . . . . . . . . 110
232           6.10.1. Retrieving amount of instruments of a file  . . . . . 110
233           6.10.2. Retrieving all instruments of a file  . . . . . . . . 110
234           6.10.3. Retrieving informations about one instrument in a
235                   file  . . . . . . . . . . . . . . . . . . . . . . . . 111
236       7.  Command Syntax  . . . . . . . . . . . . . . . . . . . . . . . 113
237         7.1.  Character Set and Escape Sequences  . . . . . . . . . . . 127
238       8.  Events  . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
239         8.1.  Number of audio output devices changed  . . . . . . . . . 131
240         8.2.  Audio output device's settings changed  . . . . . . . . . 131
241         8.3.  Number of MIDI input devices changed  . . . . . . . . . . 131
242         8.4.  MIDI input device's settings changed  . . . . . . . . . . 132
243         8.5.  Number of sampler channels changed  . . . . . . . . . . . 132
244         8.6.  MIDI data on a sampler channel arrived  . . . . . . . . . 132
245         8.7.  MIDI data on a MIDI input device arrived  . . . . . . . . 133
246         8.8.  Number of active voices changed . . . . . . . . . . . . . 133
247         8.9.  Number of active disk streams changed . . . . . . . . . . 134
248         8.10. Disk stream buffer fill state changed . . . . . . . . . . 134
249         8.11. Channel information changed . . . . . . . . . . . . . . . 134
250         8.12. Number of effect sends changed  . . . . . . . . . . . . . 135
251         8.13. Effect send information changed . . . . . . . . . . . . . 135
252         8.14. Total number of active voices changed . . . . . . . . . . 136
253         8.15. Total number of active disk streams changed . . . . . . . 136
254         8.16. Number of MIDI instrument maps changed  . . . . . . . . . 136
255         8.17. MIDI instrument map information changed . . . . . . . . . 136
256         8.18. Number of MIDI instruments changed  . . . . . . . . . . . 137
257         8.19. MIDI instrument information changed . . . . . . . . . . . 137
258         8.20. Global settings changed . . . . . . . . . . . . . . . . . 138
259         8.21. Number of database instrument directories changed . . . . 138
260         8.22. Database instrument directory information changed . . . . 138
261         8.23. Number of database instruments changed  . . . . . . . . . 139
262         8.24. Database instrument information changed . . . . . . . . . 139
263         8.25. Database job status information changed . . . . . . . . . 140
264         8.26. Miscellaneous and debugging events  . . . . . . . . . . . 140
265       9.  Security Considerations . . . . . . . . . . . . . . . . . . . 141
266       10. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 142
267       11. References  . . . . . . . . . . . . . . . . . . . . . . . . . 143
268       Author's Address  . . . . . . . . . . . . . . . . . . . . . . . . 144
269       Intellectual Property and Copyright Statements  . . . . . . . . . 145
270    
271    
272    
273    
# Line 220  Internet-Draft        LinuxSampler Contr Line 276  Internet-Draft        LinuxSampler Contr
276    
277    
278    
279  Schoenebeck               Expires July 2, 2007                  [Page 4]  Schoenebeck              Expires October 3, 2008                [Page 5]
280    
281  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
282    
283    
284  1.  Requirements notation  1.  Requirements notation
# Line 238  Internet-Draft        LinuxSampler Contr Line 294  Internet-Draft        LinuxSampler Contr
294     end) and server (LinuxSampler) respectively.  Lines in examples must     end) and server (LinuxSampler) respectively.  Lines in examples must
295     be interpreted as every line being CRLF terminated (carriage return     be interpreted as every line being CRLF terminated (carriage return
296     character followed by line feed character as defined in the ASCII     character followed by line feed character as defined in the ASCII
297     standard), thus the following example:     standard [RFC20]), thus the following example:
298    
299        C: "some line"        C: "some line"
300    
# Line 276  Internet-Draft        LinuxSampler Contr Line 332  Internet-Draft        LinuxSampler Contr
332    
333    
334    
335  Schoenebeck               Expires July 2, 2007                  [Page 5]  Schoenebeck              Expires October 3, 2008                [Page 6]
336    
337  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
338    
339    
340  2.  Versioning of this specification  2.  Versioning of this specification
# Line 307  Internet-Draft        LinuxSampler Contr Line 363  Internet-Draft        LinuxSampler Contr
363         sampler's LSCP minor version.         sampler's LSCP minor version.
364    
365     Compatibility can only be claimed if both rules are true.  The     Compatibility can only be claimed if both rules are true.  The
366     frontend can use the "GET SERVER INFO" (Section 6.6.4) command to get     frontend can use the "GET SERVER INFO" (Section 6.6.5) command to get
367     the version of the LSCP specification the sampler complies with.     the version of the LSCP specification the sampler complies with.
368    
369    
# Line 332  Internet-Draft        LinuxSampler Contr Line 388  Internet-Draft        LinuxSampler Contr
388    
389    
390    
391  Schoenebeck               Expires July 2, 2007                  [Page 6]  Schoenebeck              Expires October 3, 2008                [Page 7]
392    
393  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
394    
395    
396  3.  Introduction  3.  Introduction
# Line 388  Internet-Draft        LinuxSampler Contr Line 444  Internet-Draft        LinuxSampler Contr
444    
445    
446    
447  Schoenebeck               Expires July 2, 2007                  [Page 7]  Schoenebeck              Expires October 3, 2008                [Page 8]
448    
449  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
450    
451    
452  4.  Focus of this protocol  4.  Focus of this protocol
# Line 444  Internet-Draft        LinuxSampler Contr Line 500  Internet-Draft        LinuxSampler Contr
500    
501    
502    
503  Schoenebeck               Expires July 2, 2007                  [Page 8]  Schoenebeck              Expires October 3, 2008                [Page 9]
504    
505  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
506    
507    
508  5.  Communication Overview  5.  Communication Overview
# Line 500  Internet-Draft        LinuxSampler Contr Line 556  Internet-Draft        LinuxSampler Contr
556    
557    
558    
559  Schoenebeck               Expires July 2, 2007                  [Page 9]  Schoenebeck              Expires October 3, 2008               [Page 10]
560    
561  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
562    
563    
564  5.1.1.  Result format  5.1.1.  Result format
# Line 556  Internet-Draft        LinuxSampler Contr Line 612  Internet-Draft        LinuxSampler Contr
612    
613    
614    
615  Schoenebeck               Expires July 2, 2007                 [Page 10]  Schoenebeck              Expires October 3, 2008               [Page 11]
616    
617  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
618    
619    
620     set has the following format:     set has the following format:
# Line 612  Internet-Draft        LinuxSampler Contr Line 668  Internet-Draft        LinuxSampler Contr
668    
669    
670    
671  Schoenebeck               Expires July 2, 2007                 [Page 11]  Schoenebeck              Expires October 3, 2008               [Page 12]
672    
673  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
674    
675    
676     Each line of the result set MUST end with <CRLF>.     Each line of the result set MUST end with <CRLF>.
# Line 668  Internet-Draft        LinuxSampler Contr Line 724  Internet-Draft        LinuxSampler Contr
724    
725    
726    
727  Schoenebeck               Expires July 2, 2007                 [Page 12]  Schoenebeck              Expires October 3, 2008               [Page 13]
728    
729  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
730    
731    
732         inserted in the middle of the event message as well as any other         inserted in the middle of the event message as well as any other
# Line 724  Internet-Draft        LinuxSampler Contr Line 780  Internet-Draft        LinuxSampler Contr
780    
781    
782    
783  Schoenebeck               Expires July 2, 2007                 [Page 13]  Schoenebeck              Expires October 3, 2008               [Page 14]
784    
785  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
786    
787    
788  6.  Description for control commands  6.  Description for control commands
# Line 780  Internet-Draft        LinuxSampler Contr Line 836  Internet-Draft        LinuxSampler Contr
836    
837    
838    
839  Schoenebeck               Expires July 2, 2007                 [Page 14]  Schoenebeck              Expires October 3, 2008               [Page 15]
840    
841  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
842    
843    
844  6.2.1.  Getting amount of available audio output drivers  6.2.1.  Getting amount of available audio output drivers
# Line 836  Internet-Draft        LinuxSampler Contr Line 892  Internet-Draft        LinuxSampler Contr
892    
893    
894    
895  Schoenebeck               Expires July 2, 2007                 [Page 15]  Schoenebeck              Expires October 3, 2008               [Page 16]
896    
897  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
898    
899    
900        LinuxSampler will answer by sending a <CRLF> separated list.  Each        LinuxSampler will answer by sending a <CRLF> separated list.  Each
# Line 892  Internet-Draft        LinuxSampler Contr Line 948  Internet-Draft        LinuxSampler Contr
948    
949    
950    
951  Schoenebeck               Expires July 2, 2007                 [Page 16]  Schoenebeck              Expires October 3, 2008               [Page 17]
952    
953  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
954    
955    
956     obtained (as returned by the "GET AUDIO_OUTPUT_DRIVER INFO"     obtained (as returned by the "GET AUDIO_OUTPUT_DRIVER INFO"
# Line 948  Internet-Draft        LinuxSampler Contr Line 1004  Internet-Draft        LinuxSampler Contr
1004    
1005    
1006    
1007  Schoenebeck               Expires July 2, 2007                 [Page 17]  Schoenebeck              Expires October 3, 2008               [Page 18]
1008    
1009  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
1010    
1011    
1012        MULTIPLICITY -        MULTIPLICITY -
# Line 1004  Internet-Draft        LinuxSampler Contr Line 1060  Internet-Draft        LinuxSampler Contr
1060    
1061    
1062    
1063  Schoenebeck               Expires July 2, 2007                 [Page 18]  Schoenebeck              Expires October 3, 2008               [Page 19]
1064    
1065  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
1066    
1067    
1068           returned, dependent to driver parameter)           returned, dependent to driver parameter)
# Line 1060  Internet-Draft        LinuxSampler Contr Line 1116  Internet-Draft        LinuxSampler Contr
1116    
1117    
1118    
1119  Schoenebeck               Expires July 2, 2007                 [Page 19]  Schoenebeck              Expires October 3, 2008               [Page 20]
1120    
1121  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
1122    
1123    
1124           "TYPE: INT"           "TYPE: INT"
# Line 1116  Internet-Draft        LinuxSampler Contr Line 1172  Internet-Draft        LinuxSampler Contr
1172    
1173    
1174    
1175  Schoenebeck               Expires July 2, 2007                 [Page 20]  Schoenebeck              Expires October 3, 2008               [Page 21]
1176    
1177  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
1178    
1179    
1180           providing an appropriate warning code and warning message           providing an appropriate warning code and warning message
# Line 1172  Internet-Draft        LinuxSampler Contr Line 1228  Internet-Draft        LinuxSampler Contr
1228    
1229    
1230    
1231  Schoenebeck               Expires July 2, 2007                 [Page 21]  Schoenebeck              Expires October 3, 2008               [Page 22]
1232    
1233  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
1234    
1235    
1236        C: "DESTROY AUDIO_OUTPUT_DEVICE 0"        C: "DESTROY AUDIO_OUTPUT_DEVICE 0"
# Line 1228  Internet-Draft        LinuxSampler Contr Line 1284  Internet-Draft        LinuxSampler Contr
1284    
1285    
1286    
1287  Schoenebeck               Expires July 2, 2007                 [Page 22]  Schoenebeck              Expires October 3, 2008               [Page 23]
1288    
1289  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
1290    
1291    
1292     Possible Answers:     Possible Answers:
# Line 1284  Internet-Draft        LinuxSampler Contr Line 1340  Internet-Draft        LinuxSampler Contr
1340    
1341    
1342    
1343  Schoenebeck               Expires July 2, 2007                 [Page 23]  Schoenebeck              Expires October 3, 2008               [Page 24]
1344    
1345  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
1346    
1347    
1348           "FRAGMENTS: 2"           "FRAGMENTS: 2"
# Line 1340  Internet-Draft        LinuxSampler Contr Line 1396  Internet-Draft        LinuxSampler Contr
1396    
1397    
1398    
1399  Schoenebeck               Expires July 2, 2007                 [Page 24]  Schoenebeck              Expires October 3, 2008               [Page 25]
1400    
1401  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
1402    
1403    
1404  6.2.11.  Getting information about an audio channel  6.2.11.  Getting information about an audio channel
# Line 1396  Internet-Draft        LinuxSampler Contr Line 1452  Internet-Draft        LinuxSampler Contr
1452    
1453    
1454    
1455  Schoenebeck               Expires July 2, 2007                 [Page 25]  Schoenebeck              Expires October 3, 2008               [Page 26]
1456    
1457  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
1458    
1459    
1460     Examples:     Examples:
# Line 1452  Internet-Draft        LinuxSampler Contr Line 1508  Internet-Draft        LinuxSampler Contr
1508    
1509    
1510    
1511  Schoenebeck               Expires July 2, 2007                 [Page 26]  Schoenebeck              Expires October 3, 2008               [Page 27]
1512    
1513  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
1514    
1515    
1516     channel number and <param> a specific channel parameter name for     channel number and <param> a specific channel parameter name for
# Line 1508  Internet-Draft        LinuxSampler Contr Line 1564  Internet-Draft        LinuxSampler Contr
1564    
1565    
1566    
1567  Schoenebeck               Expires July 2, 2007                 [Page 27]  Schoenebeck              Expires October 3, 2008               [Page 28]
1568    
1569  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
1570    
1571    
1572           RANGE_MAX -           RANGE_MAX -
# Line 1564  Internet-Draft        LinuxSampler Contr Line 1620  Internet-Draft        LinuxSampler Contr
1620    
1621    
1622    
1623  Schoenebeck               Expires July 2, 2007                 [Page 28]  Schoenebeck              Expires October 3, 2008               [Page 29]
1624    
1625  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
1626    
1627    
1628        "OK" -        "OK" -
# Line 1620  Internet-Draft        LinuxSampler Contr Line 1676  Internet-Draft        LinuxSampler Contr
1676    
1677    
1678    
1679  Schoenebeck               Expires July 2, 2007                 [Page 29]  Schoenebeck              Expires October 3, 2008               [Page 30]
1680    
1681  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
1682    
1683    
1684     Note: examples in this chapter showing particular parameters of     Note: examples in this chapter showing particular parameters of
# Line 1676  Internet-Draft        LinuxSampler Contr Line 1732  Internet-Draft        LinuxSampler Contr
1732    
1733    
1734    
1735  Schoenebeck               Expires July 2, 2007                 [Page 30]  Schoenebeck              Expires October 3, 2008               [Page 31]
1736    
1737  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
1738    
1739    
1740  6.3.3.  Getting information about a specific MIDI input driver  6.3.3.  Getting information about a specific MIDI input driver
# Line 1732  Internet-Draft        LinuxSampler Contr Line 1788  Internet-Draft        LinuxSampler Contr
1788    
1789    
1790    
1791  Schoenebeck               Expires July 2, 2007                 [Page 31]  Schoenebeck              Expires October 3, 2008               [Page 32]
1792    
1793  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
1794    
1795    
1796  6.3.4.  Getting information about specific MIDI input driver parameter  6.3.4.  Getting information about specific MIDI input driver parameter
# Line 1788  Internet-Draft        LinuxSampler Contr Line 1844  Internet-Draft        LinuxSampler Contr
1844    
1845    
1846    
1847  Schoenebeck               Expires July 2, 2007                 [Page 32]  Schoenebeck              Expires October 3, 2008               [Page 33]
1848    
1849  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
1850    
1851    
1852        FIX -        FIX -
# Line 1844  Internet-Draft        LinuxSampler Contr Line 1900  Internet-Draft        LinuxSampler Contr
1900    
1901    
1902    
1903  Schoenebeck               Expires July 2, 2007                 [Page 33]  Schoenebeck              Expires October 3, 2008               [Page 34]
1904    
1905  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
1906    
1907    
1908           may also appear without (optionally returned, dependent to           may also appear without (optionally returned, dependent to
# Line 1900  Internet-Draft        LinuxSampler Contr Line 1956  Internet-Draft        LinuxSampler Contr
1956    
1957    
1958    
1959  Schoenebeck               Expires July 2, 2007                 [Page 34]  Schoenebeck              Expires October 3, 2008               [Page 35]
1960    
1961  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
1962    
1963    
1964        "OK[<device-id>]" -        "OK[<device-id>]" -
# Line 1956  Internet-Draft        LinuxSampler Contr Line 2012  Internet-Draft        LinuxSampler Contr
2012    
2013    
2014    
2015  Schoenebeck               Expires July 2, 2007                 [Page 35]  Schoenebeck              Expires October 3, 2008               [Page 36]
2016    
2017  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
2018    
2019    
2020           in case it failed, providing an appropriate error code and           in case it failed, providing an appropriate error code and
# Line 2012  Internet-Draft        LinuxSampler Contr Line 2068  Internet-Draft        LinuxSampler Contr
2068    
2069    
2070    
2071  Schoenebeck               Expires July 2, 2007                 [Page 36]  Schoenebeck              Expires October 3, 2008               [Page 37]
2072    
2073  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
2074    
2075    
2076  6.3.9.  Getting current settings of a MIDI input device  6.3.9.  Getting current settings of a MIDI input device
# Line 2068  Internet-Draft        LinuxSampler Contr Line 2124  Internet-Draft        LinuxSampler Contr
2124    
2125    
2126    
2127  Schoenebeck               Expires July 2, 2007                 [Page 37]  Schoenebeck              Expires October 3, 2008               [Page 38]
2128    
2129  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
2130    
2131    
2132           "ACTIVE: true"           "ACTIVE: true"
# Line 2124  Internet-Draft        LinuxSampler Contr Line 2180  Internet-Draft        LinuxSampler Contr
2180    
2181    
2182    
2183  Schoenebeck               Expires July 2, 2007                 [Page 38]  Schoenebeck              Expires October 3, 2008               [Page 39]
2184    
2185  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
2186    
2187    
2188     MIDI_INPUT_DEVICES" (Section 6.3.8) command and <midi-port> the MIDI     MIDI_INPUT_DEVICES" (Section 6.3.8) command and <midi-port> the MIDI
# Line 2180  Internet-Draft        LinuxSampler Contr Line 2236  Internet-Draft        LinuxSampler Contr
2236    
2237    
2238    
2239  Schoenebeck               Expires July 2, 2007                 [Page 39]  Schoenebeck              Expires October 3, 2008               [Page 40]
2240    
2241  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
2242    
2243    
2244        character string to that info category.  There is information        character string to that info category.  There is information
# Line 2236  Internet-Draft        LinuxSampler Contr Line 2292  Internet-Draft        LinuxSampler Contr
2292    
2293    
2294    
2295  Schoenebeck               Expires July 2, 2007                 [Page 40]  Schoenebeck              Expires October 3, 2008               [Page 41]
2296    
2297  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
2298    
2299    
2300           returned, dependent to device and port parameter)           returned, dependent to device and port parameter)
# Line 2272  Internet-Draft        LinuxSampler Contr Line 2328  Internet-Draft        LinuxSampler Contr
2328     device as returned by the "CREATE MIDI_INPUT_DEVICE" (Section 6.3.5)     device as returned by the "CREATE MIDI_INPUT_DEVICE" (Section 6.3.5)
2329     or "LIST MIDI_INPUT_DEVICES" (Section 6.3.8) command, <port> by the     or "LIST MIDI_INPUT_DEVICES" (Section 6.3.8) command, <port> by the
2330     MIDI port number, <key> by the name of the parameter to change and     MIDI port number, <key> by the name of the parameter to change and
2331     <value> by the new value for this parameter.     <value> by the new value for this parameter (encapsulated into
2332       apostrophes) or NONE (not encapsulated into apostrophes) for
2333       specifying no value for parameters allowing a list of values.
2334    
2335     Possible Answers:     Possible Answers:
2336    
# Line 2286  Internet-Draft        LinuxSampler Contr Line 2344  Internet-Draft        LinuxSampler Contr
2344           noteworthy issue(s) related, providing an appropriate warning           noteworthy issue(s) related, providing an appropriate warning
2345           code and warning message           code and warning message
2346    
       "ERR:<error-code>:<error-message>" -  
   
2347    
2348    
2349    
2350    
2351  Schoenebeck               Expires July 2, 2007                 [Page 41]  Schoenebeck              Expires October 3, 2008               [Page 42]
2352    
2353  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
2354    
2355    
2356          "ERR:<error-code>:<error-message>" -
2357    
2358           in case it failed, providing an appropriate error code and           in case it failed, providing an appropriate error code and
2359           error message           error message
2360    
2361     Example:     Example:
2362    
2363          C: "SET MIDI_INPUT_PORT_PARAMETER 0 0 ALSA_SEQ_BINDINGS='20:0'"
2364    
2365          S: "OK"
2366    
2367          C: "SET MIDI_INPUT_PORT_PARAMETER 0 0 ALSA_SEQ_BINDINGS=NONE"
2368    
2369          S: "OK"
2370    
2371  6.4.  Configuring sampler channels  6.4.  Configuring sampler channels
2372    
# Line 2324  Internet-Draft        LinuxSampler Contr Line 2388  Internet-Draft        LinuxSampler Contr
2388     of the sampler channel the instrument should be assigned to.  Each     of the sampler channel the instrument should be assigned to.  Each
2389     sampler channel can only have one instrument.     sampler channel can only have one instrument.
2390    
2391       Notice: since LSCP 1.2 the <filename> argument supports escape
2392       characters for special characters (see chapter "Character Set and
2393       Escape Sequences (Section 7.1)" for details) and accordingly
2394       backslash characters in the filename MUST now be escaped as well!
2395    
2396     The difference between regular and NON_MODAL versions of the command     The difference between regular and NON_MODAL versions of the command
2397     is that the regular command returns OK only after the instrument has     is that the regular command returns OK only after the instrument has
2398     been fully loaded and the channel is ready to be used while NON_MODAL     been fully loaded and the channel is ready to be used while NON_MODAL
# Line 2332  Internet-Draft        LinuxSampler Contr Line 2401  Internet-Draft        LinuxSampler Contr
2401     (Section 6.4.10) command can be used to obtain loading progress from     (Section 6.4.10) command can be used to obtain loading progress from
2402     INSTRUMENT_STATUS field.  LOAD command will perform sanity checks     INSTRUMENT_STATUS field.  LOAD command will perform sanity checks
2403     such as making sure that the file could be read and it is of a proper     such as making sure that the file could be read and it is of a proper
2404    
2405    
2406    
2407    Schoenebeck              Expires October 3, 2008               [Page 43]
2408    
2409    Internet-Draft        LinuxSampler Control Protocol           April 2008
2410    
2411    
2412     format and SHOULD return ERR and SHOULD not launch the background     format and SHOULD return ERR and SHOULD not launch the background
2413     process should any errors be detected at that point.     process should any errors be detected at that point.
2414    
# Line 2345  Internet-Draft        LinuxSampler Contr Line 2422  Internet-Draft        LinuxSampler Contr
2422    
2423           in case the instrument was loaded successfully, but there are           in case the instrument was loaded successfully, but there are
2424           noteworthy issue(s) related (e.g.  Engine doesn't support one           noteworthy issue(s) related (e.g.  Engine doesn't support one
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 42]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
2425           or more patch parameters provided by the loaded instrument           or more patch parameters provided by the loaded instrument
2426           file), providing an appropriate warning code and warning           file), providing an appropriate warning code and warning
2427           message           message
# Line 2362  Internet-Draft        LinuxSampler Contr Line 2431  Internet-Draft        LinuxSampler Contr
2431           in case it failed, providing an appropriate error code and           in case it failed, providing an appropriate error code and
2432           error message           error message
2433    
2434     Example:     Example (Unix):
2435    
2436          C: LOAD INSTRUMENT '/home/joe/gigs/cello.gig' 0 0
2437    
2438          S: OK
2439    
2440       Example (Windows):
2441    
2442          C: LOAD INSTRUMENT 'D:/MySounds/cello.gig' 0 0
2443    
2444          S: OK
2445    
2446  6.4.2.  Loading a sampler engine  6.4.2.  Loading a sampler engine
2447    
# Line 2380  Internet-Draft        LinuxSampler Contr Line 2457  Internet-Draft        LinuxSampler Contr
2457     be assigned to.  This command should be issued after adding a new     be assigned to.  This command should be issued after adding a new
2458     sampler channel and before any other control commands on the new     sampler channel and before any other control commands on the new
2459     sampler channel.  It can also be used to change the engine type of a     sampler channel.  It can also be used to change the engine type of a
2460    
2461    
2462    
2463    Schoenebeck              Expires October 3, 2008               [Page 44]
2464    
2465    Internet-Draft        LinuxSampler Control Protocol           April 2008
2466    
2467    
2468     sampler channel.  This command has (currently) no way to define or     sampler channel.  This command has (currently) no way to define or
2469     force if a new engine instance should be created and assigned to the     force if a new engine instance should be created and assigned to the
2470     given sampler channel or if an already existing instance of that     given sampler channel or if an already existing instance of that
# Line 2402  Internet-Draft        LinuxSampler Contr Line 2487  Internet-Draft        LinuxSampler Contr
2487           in case it failed, providing an appropriate error code and           in case it failed, providing an appropriate error code and
2488           error message           error message
2489    
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 43]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
2490     Example:     Example:
2491    
2492    
# Line 2432  Internet-Draft        LinuxSampler Contr Line 2510  Internet-Draft        LinuxSampler Contr
2510    
2511        S: "12"        S: "12"
2512    
2513    
2514    
2515    
2516    
2517    
2518    
2519    Schoenebeck              Expires October 3, 2008               [Page 45]
2520    
2521    Internet-Draft        LinuxSampler Control Protocol           April 2008
2522    
2523    
2524  6.4.4.  Getting all created sampler channel list  6.4.4.  Getting all created sampler channel list
2525    
2526     The number of sampler channels can change on runtime.  To get the     The number of sampler channels can change on runtime.  To get the
# Line 2456  Internet-Draft        LinuxSampler Contr Line 2545  Internet-Draft        LinuxSampler Contr
2545     A new sampler channel can be added to the end of the sampler channel     A new sampler channel can be added to the end of the sampler channel
2546     list by sending the following command:     list by sending the following command:
2547    
   
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 44]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
2548        ADD CHANNEL        ADD CHANNEL
2549    
2550     This will increment the sampler channel count by one and the new     This will increment the sampler channel count by one and the new
# Line 2488  Internet-Draft        LinuxSampler Contr Line 2568  Internet-Draft        LinuxSampler Contr
2568    
2569        "WRN:<warning-code>:<warning-message>" -        "WRN:<warning-code>:<warning-message>" -
2570    
2571    
2572    
2573    
2574    
2575    Schoenebeck              Expires October 3, 2008               [Page 46]
2576    
2577    Internet-Draft        LinuxSampler Control Protocol           April 2008
2578    
2579    
2580           in case a new channel was added successfully, but there are           in case a new channel was added successfully, but there are
2581           noteworthy issue(s) related, providing an appropriate warning           noteworthy issue(s) related, providing an appropriate warning
2582           code and warning message           code and warning message
# Line 2514  Internet-Draft        LinuxSampler Contr Line 2603  Internet-Draft        LinuxSampler Contr
2603    
2604     Possible Answers:     Possible Answers:
2605    
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 45]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
2606        "OK" -        "OK" -
2607    
2608           in case the given sampler channel could be removed           in case the given sampler channel could be removed
# Line 2540  Internet-Draft        LinuxSampler Contr Line 2622  Internet-Draft        LinuxSampler Contr
2622    
2623    
2624    
2625    
2626    
2627    
2628    
2629    
2630    
2631    Schoenebeck              Expires October 3, 2008               [Page 47]
2632    
2633    Internet-Draft        LinuxSampler Control Protocol           April 2008
2634    
2635    
2636  6.4.7.  Getting amount of available engines  6.4.7.  Getting amount of available engines
2637    
2638     The front-end can ask for the number of available engines by sending     The front-end can ask for the number of available engines by sending
# Line 2567  Internet-Draft        LinuxSampler Contr Line 2660  Internet-Draft        LinuxSampler Contr
2660    
2661     Possible Answers:     Possible Answers:
2662    
   
   
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 46]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
2663        LinuxSampler will answer by sending a comma separated list of the        LinuxSampler will answer by sending a comma separated list of the
2664        engines' names encapsulated into apostrophes (').  Engine names        engines' names encapsulated into apostrophes (').  Engine names
2665        can consist of lower and upper cases, digits and underlines ("_"        can consist of lower and upper cases, digits and underlines ("_"
# Line 2598  Internet-Draft        LinuxSampler Contr Line 2681  Internet-Draft        LinuxSampler Contr
2681     Where <engine-name> is an engine name as obtained by the "LIST     Where <engine-name> is an engine name as obtained by the "LIST
2682     AVAILABLE_ENGINES" (Section 6.4.8) command.     AVAILABLE_ENGINES" (Section 6.4.8) command.
2683    
2684    
2685    
2686    
2687    Schoenebeck              Expires October 3, 2008               [Page 48]
2688    
2689    Internet-Draft        LinuxSampler Control Protocol           April 2008
2690    
2691    
2692     Possible Answers:     Possible Answers:
2693    
2694        LinuxSampler will answer by sending a <CRLF> separated list.  Each        LinuxSampler will answer by sending a <CRLF> separated list.  Each
# Line 2610  Internet-Draft        LinuxSampler Contr Line 2701  Internet-Draft        LinuxSampler Contr
2701    
2702           DESCRIPTION -           DESCRIPTION -
2703    
2704              arbitrary description text about the engine              arbitrary description text about the engine (note that the
2705                character string may contain escape sequences (Section 7.1))
2706    
2707           VERSION -           VERSION -
2708    
# Line 2624  Internet-Draft        LinuxSampler Contr Line 2716  Internet-Draft        LinuxSampler Contr
2716    
2717        S: "DESCRIPTION: this is Joe's custom sampler engine"        S: "DESCRIPTION: this is Joe's custom sampler engine"
2718    
   
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 47]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
2719           "VERSION: testing-1.0"           "VERSION: testing-1.0"
2720    
2721           "."           "."
# Line 2654  Internet-Draft        LinuxSampler Contr Line 2737  Internet-Draft        LinuxSampler Contr
2737        answer line begins with the settings category name followed by a        answer line begins with the settings category name followed by a
2738        colon and then a space character <SP> and finally the info        colon and then a space character <SP> and finally the info
2739        character string to that setting category.  At the moment the        character string to that setting category.  At the moment the
2740    
2741    
2742    
2743    Schoenebeck              Expires October 3, 2008               [Page 49]
2744    
2745    Internet-Draft        LinuxSampler Control Protocol           April 2008
2746    
2747    
2748        following categories are defined:        following categories are defined:
2749    
2750    
# Line 2681  Internet-Draft        LinuxSampler Contr Line 2772  Internet-Draft        LinuxSampler Contr
2772              comma separated list which reflects to which audio channel              comma separated list which reflects to which audio channel
2773              of the selected audio output device each sampler output              of the selected audio output device each sampler output
2774              channel is routed to, e.g. "0,3" would mean the engine's              channel is routed to, e.g. "0,3" would mean the engine's
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 48]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
2775              output channel 0 is routed to channel 0 of the audio output              output channel 0 is routed to channel 0 of the audio output
2776              device and the engine's output channel 1 is routed to the              device and the engine's output channel 1 is routed to the
2777              channel 3 of the audio output device              channel 3 of the audio output device
# Line 2696  Internet-Draft        LinuxSampler Contr Line 2779  Internet-Draft        LinuxSampler Contr
2779           INSTRUMENT_FILE -           INSTRUMENT_FILE -
2780    
2781              the file name of the loaded instrument, "NONE" if there's no              the file name of the loaded instrument, "NONE" if there's no
2782              instrument yet loaded for this sampler channel              instrument yet loaded for this sampler channel (note: since
2783                LSCP 1.2 this path may contain escape sequences
2784                (Section 7.1))
2785    
2786           INSTRUMENT_NR -           INSTRUMENT_NR -
2787    
# Line 2704  Internet-Draft        LinuxSampler Contr Line 2789  Internet-Draft        LinuxSampler Contr
2789    
2790           INSTRUMENT_NAME -           INSTRUMENT_NAME -
2791    
2792              the instrument name of the loaded instrument              the instrument name of the loaded instrument (note: since
2793                LSCP 1.2 this character string may contain escape sequences
2794                (Section 7.1))
2795    
2796    
2797    
2798    
2799    Schoenebeck              Expires October 3, 2008               [Page 50]
2800    
2801    Internet-Draft        LinuxSampler Control Protocol           April 2008
2802    
2803    
2804           INSTRUMENT_STATUS -           INSTRUMENT_STATUS -
2805    
# Line 2735  Internet-Draft        LinuxSampler Contr Line 2830  Internet-Draft        LinuxSampler Contr
2830              (where a value < 1.0 means attenuation and a value > 1.0              (where a value < 1.0 means attenuation and a value > 1.0
2831              means amplification)              means amplification)
2832    
   
   
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 49]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
2833           MUTE -           MUTE -
2834    
2835              Determines whether the channel is muted, "true" if the              Determines whether the channel is muted, "true" if the
# Line 2765  Internet-Draft        LinuxSampler Contr Line 2850  Internet-Draft        LinuxSampler Contr
2850              MIDI_INSTRUMENT_MAP" (Section 6.4.24) for a list of possible              MIDI_INSTRUMENT_MAP" (Section 6.4.24) for a list of possible
2851              values.              values.
2852    
2853    
2854    
2855    Schoenebeck              Expires October 3, 2008               [Page 51]
2856    
2857    Internet-Draft        LinuxSampler Control Protocol           April 2008
2858    
2859    
2860     The mentioned fields above don't have to be in particular order.     The mentioned fields above don't have to be in particular order.
2861    
2862     Example:     Example:
# Line 2793  Internet-Draft        LinuxSampler Contr Line 2885  Internet-Draft        LinuxSampler Contr
2885    
2886           "MIDI_INPUT_PORT: 0"           "MIDI_INPUT_PORT: 0"
2887    
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 50]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
2888           "MIDI_INPUT_CHANNEL: 5"           "MIDI_INPUT_CHANNEL: 5"
2889    
2890           "VOLUME: 1.0"           "VOLUME: 1.0"
# Line 2821  Internet-Draft        LinuxSampler Contr Line 2905  Internet-Draft        LinuxSampler Contr
2905        GET CHANNEL VOICE_COUNT <sampler-channel>        GET CHANNEL VOICE_COUNT <sampler-channel>
2906    
2907     Where <sampler-channel> is the sampler channel number the front-end     Where <sampler-channel> is the sampler channel number the front-end
2908    
2909    
2910    
2911    Schoenebeck              Expires October 3, 2008               [Page 52]
2912    
2913    Internet-Draft        LinuxSampler Control Protocol           April 2008
2914    
2915    
2916     is interested in as returned by the "ADD CHANNEL" (Section 6.4.5) or     is interested in as returned by the "ADD CHANNEL" (Section 6.4.5) or
2917     "LIST CHANNELS" (Section 6.4.4) command.     "LIST CHANNELS" (Section 6.4.4) command.
2918    
# Line 2849  Internet-Draft        LinuxSampler Contr Line 2941  Internet-Draft        LinuxSampler Contr
2941        LinuxSampler will answer by returning the number of active disk        LinuxSampler will answer by returning the number of active disk
2942        streams on that channel in case the engine supports disk        streams on that channel in case the engine supports disk
2943        streaming, if the engine doesn't support disk streaming it will        streaming, if the engine doesn't support disk streaming it will
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 51]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
2944        return "NA" for not available.        return "NA" for not available.
2945    
2946     Example:     Example:
# Line 2877  Internet-Draft        LinuxSampler Contr Line 2961  Internet-Draft        LinuxSampler Contr
2961     to get the fill state in percent, where <sampler-channel> is the     to get the fill state in percent, where <sampler-channel> is the
2962     sampler channel number the front-end is interested in as returned by     sampler channel number the front-end is interested in as returned by
2963     the "ADD CHANNEL" (Section 6.4.5) or "LIST CHANNELS" (Section 6.4.4)     the "ADD CHANNEL" (Section 6.4.5) or "LIST CHANNELS" (Section 6.4.4)
2964    
2965    
2966    
2967    Schoenebeck              Expires October 3, 2008               [Page 53]
2968    
2969    Internet-Draft        LinuxSampler Control Protocol           April 2008
2970    
2971    
2972     command.     command.
2973    
2974     Possible Answers:     Possible Answers:
# Line 2904  Internet-Draft        LinuxSampler Contr Line 2996  Internet-Draft        LinuxSampler Contr
2996    
2997        C: "GET CHANNEL BUFFER_FILL PERCENTAGE 4"        C: "GET CHANNEL BUFFER_FILL PERCENTAGE 4"
2998    
   
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 52]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
2999        S: ""        S: ""
3000    
3001  6.4.14.  Setting audio output device  6.4.14.  Setting audio output device
# Line 2932  Internet-Draft        LinuxSampler Contr Line 3015  Internet-Draft        LinuxSampler Contr
3015    
3016     Possible Answers:     Possible Answers:
3017    
3018    
3019    
3020    
3021    
3022    
3023    Schoenebeck              Expires October 3, 2008               [Page 54]
3024    
3025    Internet-Draft        LinuxSampler Control Protocol           April 2008
3026    
3027    
3028        "OK" -        "OK" -
3029    
3030           on success           on success
# Line 2961  Internet-Draft        LinuxSampler Contr Line 3054  Internet-Draft        LinuxSampler Contr
3054        SET CHANNEL AUDIO_OUTPUT_TYPE <sampler-channel> <audio-output-        SET CHANNEL AUDIO_OUTPUT_TYPE <sampler-channel> <audio-output-
3055        type>        type>
3056    
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 53]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
3057     Where <audio-output-type> is currently either "ALSA" or "JACK" and     Where <audio-output-type> is currently either "ALSA" or "JACK" and
3058     <sampler-channel> is the respective sampler channel number.     <sampler-channel> is the respective sampler channel number.
3059    
# Line 2989  Internet-Draft        LinuxSampler Contr Line 3074  Internet-Draft        LinuxSampler Contr
3074           in case it failed, providing an appropriate error code and           in case it failed, providing an appropriate error code and
3075           error message           error message
3076    
3077    
3078    
3079    Schoenebeck              Expires October 3, 2008               [Page 55]
3080    
3081    Internet-Draft        LinuxSampler Control Protocol           April 2008
3082    
3083    
3084     Examples:     Examples:
3085    
3086    
# Line 3016  Internet-Draft        LinuxSampler Contr Line 3108  Internet-Draft        LinuxSampler Contr
3108    
3109        "WRN:<warning-code>:<warning-message>" -        "WRN:<warning-code>:<warning-message>" -
3110    
   
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 54]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
3111           if audio output channel was set, but there are noteworthy           if audio output channel was set, but there are noteworthy
3112           issue(s) related, providing an appropriate warning code and           issue(s) related, providing an appropriate warning code and
3113           warning message           warning message
# Line 3046  Internet-Draft        LinuxSampler Contr Line 3129  Internet-Draft        LinuxSampler Contr
3129        SET CHANNEL MIDI_INPUT_DEVICE <sampler-channel> <midi-device-id>        SET CHANNEL MIDI_INPUT_DEVICE <sampler-channel> <midi-device-id>
3130    
3131     Where <sampler-channel> is the sampler channel number as returned by     Where <sampler-channel> is the sampler channel number as returned by
3132    
3133    
3134    
3135    Schoenebeck              Expires October 3, 2008               [Page 56]
3136    
3137    Internet-Draft        LinuxSampler Control Protocol           April 2008
3138    
3139    
3140     the "ADD CHANNEL" (Section 6.4.5) or "LIST CHANNELS" (Section 6.4.4)     the "ADD CHANNEL" (Section 6.4.5) or "LIST CHANNELS" (Section 6.4.4)
3141     command and <midi-device-id> is the numerical ID of the MIDI input     command and <midi-device-id> is the numerical ID of the MIDI input
3142     device as returned by the "CREATE MIDI_INPUT_DEVICE" (Section 6.3.5)     device as returned by the "CREATE MIDI_INPUT_DEVICE" (Section 6.3.5)
# Line 3072  Internet-Draft        LinuxSampler Contr Line 3163  Internet-Draft        LinuxSampler Contr
3163    
3164    
3165    
   
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 55]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
3166  6.4.18.  Setting MIDI input type  6.4.18.  Setting MIDI input type
3167    
3168     DEPRECATED: THIS COMMAND WILL DISAPPEAR SOON!     DEPRECATED: THIS COMMAND WILL DISAPPEAR SOON!
# Line 3103  Internet-Draft        LinuxSampler Contr Line 3185  Internet-Draft        LinuxSampler Contr
3185    
3186           if MIDI input type was set, but there are noteworthy issue(s)           if MIDI input type was set, but there are noteworthy issue(s)
3187           related, providing an appropriate warning code and warning           related, providing an appropriate warning code and warning
3188    
3189    
3190    
3191    Schoenebeck              Expires October 3, 2008               [Page 57]
3192    
3193    Internet-Draft        LinuxSampler Control Protocol           April 2008
3194    
3195    
3196           message           message
3197    
3198        "ERR:<error-code>:<error-message>" -        "ERR:<error-code>:<error-message>" -
# Line 3128  Internet-Draft        LinuxSampler Contr Line 3218  Internet-Draft        LinuxSampler Contr
3218    
3219        "OK" -        "OK" -
3220    
   
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 56]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
3221           on success           on success
3222    
3223        "WRN:<warning-code>:<warning-message>" -        "WRN:<warning-code>:<warning-message>" -
# Line 3159  Internet-Draft        LinuxSampler Contr Line 3240  Internet-Draft        LinuxSampler Contr
3240     The front-end can alter the MIDI channel a sampler channel should     The front-end can alter the MIDI channel a sampler channel should
3241     listen to by sending the following command:     listen to by sending the following command:
3242    
3243    
3244    
3245    
3246    
3247    Schoenebeck              Expires October 3, 2008               [Page 58]
3248    
3249    Internet-Draft        LinuxSampler Control Protocol           April 2008
3250    
3251    
3252        SET CHANNEL MIDI_INPUT_CHANNEL <sampler-channel> <midi-input-chan>        SET CHANNEL MIDI_INPUT_CHANNEL <sampler-channel> <midi-input-chan>
3253    
3254     Where <midi-input-chan> is the number of the new MIDI input channel     Where <midi-input-chan> is the number of the new MIDI input channel
# Line 3186  Internet-Draft        LinuxSampler Contr Line 3276  Internet-Draft        LinuxSampler Contr
3276    
3277    
3278    
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 57]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
   
   
3279  6.4.21.  Setting channel volume  6.4.21.  Setting channel volume
3280    
3281     The front-end can alter the volume of a sampler channel by sending     The front-end can alter the volume of a sampler channel by sending
# Line 3215  Internet-Draft        LinuxSampler Contr Line 3296  Internet-Draft        LinuxSampler Contr
3296    
3297        "WRN:<warning-code>:<warning-message>" -        "WRN:<warning-code>:<warning-message>" -
3298    
3299    
3300    
3301    
3302    
3303    Schoenebeck              Expires October 3, 2008               [Page 59]
3304    
3305    Internet-Draft        LinuxSampler Control Protocol           April 2008
3306    
3307    
3308           if channel volume was set, but there are noteworthy issue(s)           if channel volume was set, but there are noteworthy issue(s)
3309           related, providing an appropriate warning code and warning           related, providing an appropriate warning code and warning
3310           message           message
# Line 3242  Internet-Draft        LinuxSampler Contr Line 3332  Internet-Draft        LinuxSampler Contr
3332    
3333     Possible Answers:     Possible Answers:
3334    
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 58]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
3335        "OK" -        "OK" -
3336    
3337           on success           on success
# Line 3268  Internet-Draft        LinuxSampler Contr Line 3351  Internet-Draft        LinuxSampler Contr
3351    
3352    
3353    
3354    
3355    
3356    
3357    
3358    
3359    Schoenebeck              Expires October 3, 2008               [Page 60]
3360    
3361    Internet-Draft        LinuxSampler Control Protocol           April 2008
3362    
3363    
3364  6.4.23.  Soloing a sampler channel  6.4.23.  Soloing a sampler channel
3365    
3366     The front-end can solo/unsolo a specific sampler channel by sending     The front-end can solo/unsolo a specific sampler channel by sending
# Line 3297  Internet-Draft        LinuxSampler Contr Line 3390  Internet-Draft        LinuxSampler Contr
3390           in case it failed, providing an appropriate error code and           in case it failed, providing an appropriate error code and
3391           error message           error message
3392    
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 59]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
3393     Examples:     Examples:
3394    
3395    
# Line 3323  Internet-Draft        LinuxSampler Contr Line 3408  Internet-Draft        LinuxSampler Contr
3408    
3409        "NONE" -        "NONE" -
3410    
3411    
3412    
3413    
3414    
3415    Schoenebeck              Expires October 3, 2008               [Page 61]
3416    
3417    Internet-Draft        LinuxSampler Control Protocol           April 2008
3418    
3419    
3420           This is the default setting.  In this case the sampler channel           This is the default setting.  In this case the sampler channel
3421           is not assigned any MIDI instrument map and thus will ignore           is not assigned any MIDI instrument map and thus will ignore
3422           all MIDI program change messages.           all MIDI program change messages.
# Line 3354  Internet-Draft        LinuxSampler Contr Line 3448  Internet-Draft        LinuxSampler Contr
3448           in case it failed, providing an appropriate error code and           in case it failed, providing an appropriate error code and
3449           error message           error message
3450    
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 60]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
3451     Examples:     Examples:
3452    
3453    
# Line 3378  Internet-Draft        LinuxSampler Contr Line 3465  Internet-Draft        LinuxSampler Contr
3465     effect send should be created on, <midi-ctrl> is a number between     effect send should be created on, <midi-ctrl> is a number between
3466     0..127 defining the MIDI controller which can alter the effect send     0..127 defining the MIDI controller which can alter the effect send
3467     level and <name> is an optional argument defining a name for the     level and <name> is an optional argument defining a name for the
3468     effect send entity.  The name does not have to be unique.  
3469    
3470    
3471    Schoenebeck              Expires October 3, 2008               [Page 62]
3472    
3473    Internet-Draft        LinuxSampler Control Protocol           April 2008
3474    
3475    
3476       effect send entity.  The name does not have to be unique, but MUST be
3477       encapsulated into apostrophes and supports escape sequences as
3478       described in chapter "Character Set and Escape Sequences
3479       (Section 7.1)".
3480    
3481     By default, that is as initial routing, the effect send's audio     By default, that is as initial routing, the effect send's audio
3482     channels are automatically routed to the last audio channels of the     channels are automatically routed to the last audio channels of the
# Line 3387  Internet-Draft        LinuxSampler Contr Line 3485  Internet-Draft        LinuxSampler Contr
3485     having dedicated effect send output channels and when "CREATE     having dedicated effect send output channels and when "CREATE
3486     FX_SEND" is called, those channels will automatically be picked.  You     FX_SEND" is called, those channels will automatically be picked.  You
3487     can alter the destination channels however with "SET FX_SEND     can alter the destination channels however with "SET FX_SEND
3488     AUDIO_OUTPUT_CHANNEL" (Section 6.4.30).     AUDIO_OUTPUT_CHANNEL" (Section 6.4.31).
3489    
3490     Note: Create effect sends on a sampler channel only when needed,     Note: Create effect sends on a sampler channel only when needed,
3491     because having effect sends on a sampler channel will decrease     because having effect sends on a sampler channel will decrease
# Line 3407  Internet-Draft        LinuxSampler Contr Line 3505  Internet-Draft        LinuxSampler Contr
3505           channel, where <fx-send-id> reflects the unique ID of the newly           channel, where <fx-send-id> reflects the unique ID of the newly
3506           created effect send entity           created effect send entity
3507    
   
   
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 61]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
3508        "ERR:<error-code>:<error-message>" -        "ERR:<error-code>:<error-message>" -
3509    
3510           when a new effect send could not be added, i.e. due to invalid           when a new effect send could not be added, i.e. due to invalid
# Line 3432  Internet-Draft        LinuxSampler Contr Line 3520  Internet-Draft        LinuxSampler Contr
3520    
3521        S: "OK[1]"        S: "OK[1]"
3522    
3523    
3524    
3525    
3526    
3527    Schoenebeck              Expires October 3, 2008               [Page 63]
3528    
3529    Internet-Draft        LinuxSampler Control Protocol           April 2008
3530    
3531    
3532  6.4.26.  Removing an effect send from a sampler channel  6.4.26.  Removing an effect send from a sampler channel
3533    
3534     The front-end can remove an existing effect send on a specific     The front-end can remove an existing effect send on a specific
# Line 3463  Internet-Draft        LinuxSampler Contr Line 3560  Internet-Draft        LinuxSampler Contr
3560    
3561        S: "OK"        S: "OK"
3562    
   
   
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 62]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
3563  6.4.27.  Getting amount of effect sends on a sampler channel  6.4.27.  Getting amount of effect sends on a sampler channel
3564    
3565     The front-end can ask for the amount of effect sends on a specific     The front-end can ask for the amount of effect sends on a specific
# Line 3491  Internet-Draft        LinuxSampler Contr Line 3578  Internet-Draft        LinuxSampler Contr
3578    
3579     Example:     Example:
3580    
3581    
3582    
3583    Schoenebeck              Expires October 3, 2008               [Page 64]
3584    
3585    Internet-Draft        LinuxSampler Control Protocol           April 2008
3586    
3587    
3588        C: "GET FX_SENDS 0"        C: "GET FX_SENDS 0"
3589    
3590        S: "2"        S: "2"
# Line 3521  Internet-Draft        LinuxSampler Contr Line 3615  Internet-Draft        LinuxSampler Contr
3615    
3616        S: ""        S: ""
3617    
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 63]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
3618  6.4.29.  Getting effect send information  6.4.29.  Getting effect send information
3619    
3620     The front-end can ask for the current settings of an effect send     The front-end can ask for the current settings of an effect send
# Line 3547  Internet-Draft        LinuxSampler Contr Line 3633  Internet-Draft        LinuxSampler Contr
3633        The sampler will answer by sending a <CRLF> separated list.  Each        The sampler will answer by sending a <CRLF> separated list.  Each
3634        answer line begins with the settings category name followed by a        answer line begins with the settings category name followed by a
3635        colon and then a space character <SP> and finally the info        colon and then a space character <SP> and finally the info
3636    
3637    
3638    
3639    Schoenebeck              Expires October 3, 2008               [Page 65]
3640    
3641    Internet-Draft        LinuxSampler Control Protocol           April 2008
3642    
3643    
3644        character string to that setting category.  At the moment the        character string to that setting category.  At the moment the
3645        following categories are defined:        following categories are defined:
3646    
# Line 3554  Internet-Draft        LinuxSampler Contr Line 3648  Internet-Draft        LinuxSampler Contr
3648    
3649           NAME -           NAME -
3650    
3651              name of the effect send entity              name of the effect send entity (note that this character
3652                string may contain escape sequences (Section 7.1))
3653    
3654             MIDI_CONTROLLER -
3655    
3656                a value between 0 and 127 reflecting the MIDI controller
3657                which is able to modify the effect send's send level
3658    
3659             LEVEL -
3660    
3661                optionally dotted number reflecting the effect send's
3662                current send level (where a value < 1.0 means attenuation
3663                and a value > 1.0 means amplification)
3664    
3665           AUDIO_OUTPUT_ROUTING -           AUDIO_OUTPUT_ROUTING -
3666    
# Line 3564  Internet-Draft        LinuxSampler Contr Line 3670  Internet-Draft        LinuxSampler Contr
3670              send's output channel 0 is routed to channel 0 of the audio              send's output channel 0 is routed to channel 0 of the audio
3671              output device and the effect send's output channel 1 is              output device and the effect send's output channel 1 is
3672              routed to the channel 3 of the audio output device (see "SET              routed to the channel 3 of the audio output device (see "SET
3673              FX_SEND AUDIO_OUTPUT_CHANNEL" (Section 6.4.30) for details)              FX_SEND AUDIO_OUTPUT_CHANNEL" (Section 6.4.31) for details)
3674    
3675     The mentioned fields above don't have to be in particular order.     The mentioned fields above don't have to be in particular order.
3676    
# Line 3574  Internet-Draft        LinuxSampler Contr Line 3680  Internet-Draft        LinuxSampler Contr
3680    
3681        S: "NAME: Reverb Send"        S: "NAME: Reverb Send"
3682    
3683             "MIDI_CONTROLLER: 91"
3684    
3685             "LEVEL: 0.3"
3686    
3687           "AUDIO_OUTPUT_ROUTING: 2,3"           "AUDIO_OUTPUT_ROUTING: 2,3"
3688    
3689             "."
3690    
3691    
3692    
3693    
3694  Schoenebeck               Expires July 2, 2007                 [Page 64]  
3695    Schoenebeck              Expires October 3, 2008               [Page 66]
3696    
3697  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
3698    
3699    
3700           "."  6.4.30.  Changing effect send's name
3701    
3702       The front-end can alter the current name of an effect send entity by
3703       sending the following command:
3704    
3705          SET FX_SEND NAME <sampler-chan> <fx-send-id> <name>
3706    
3707       Where <sampler-chan> is the sampler channel number as returned by the
3708       "ADD CHANNEL" (Section 6.4.5) or "LIST CHANNELS" (Section 6.4.4)
3709       command, <fx-send-id> reflects the numerical ID of the effect send
3710       entity as returned by the "CREATE FX_SEND" (Section 6.4.25) or "LIST
3711       FX_SENDS" (Section 6.4.28) command and <name> is the new name of the
3712       effect send entity, which does not have to be unique (name MUST be
3713       encapsulated into apostrophes and supports escape sequences as
3714       described in chapter "Character Set and Escape Sequences
3715       (Section 7.1)").
3716    
3717       Possible Answers:
3718    
3719          "OK" -
3720    
3721             on success
3722    
3723          "ERR:<error-code>:<error-message>" -
3724    
3725             in case it failed, providing an appropriate error code and
3726             error message
3727    
3728       Example:
3729    
3730          C: "SET FX_SEND NAME 0 0 'Fx Send 1'"
3731    
3732  6.4.30.  Altering effect send's audio routing        S: "OK"
3733    
3734    6.4.31.  Altering effect send's audio routing
3735    
3736     The front-end can alter the destination of an effect send's audio     The front-end can alter the destination of an effect send's audio
3737     channel on a specific sampler channel by sending the following     channel on a specific sampler channel by sending the following
# Line 3601  Internet-Draft        LinuxSampler Contr Line 3745  Internet-Draft        LinuxSampler Contr
3745     command, <fx-send-id> reflects the numerical ID of the effect send     command, <fx-send-id> reflects the numerical ID of the effect send
3746     entity as returned by the "CREATE FX_SEND" (Section 6.4.25) or "LIST     entity as returned by the "CREATE FX_SEND" (Section 6.4.25) or "LIST
3747     FX_SENDS" (Section 6.4.28) command, <audio-src> is the numerical ID     FX_SENDS" (Section 6.4.28) command, <audio-src> is the numerical ID
3748    
3749    
3750    
3751    Schoenebeck              Expires October 3, 2008               [Page 67]
3752    
3753    Internet-Draft        LinuxSampler Control Protocol           April 2008
3754    
3755    
3756     of the effect send's audio channel which should be rerouted and     of the effect send's audio channel which should be rerouted and
3757     <audio-dst> is the numerical ID of the audio channel of the selected     <audio-dst> is the numerical ID of the audio channel of the selected
3758     audio output device where <audio-src> should be routed to.     audio output device where <audio-src> should be routed to.
# Line 3634  Internet-Draft        LinuxSampler Contr Line 3786  Internet-Draft        LinuxSampler Contr
3786           in case it failed, providing an appropriate error code and           in case it failed, providing an appropriate error code and
3787           error message           error message
3788    
3789       Example:
3790    
3791          C: "SET FX_SEND AUDIO_OUTPUT_CHANNEL 0 0 0 2"
3792    
3793          S: "OK"
3794    
3795    6.4.32.  Altering effect send's MIDI controller
3796    
3797       The front-end can alter the MIDI controller of an effect send entity
3798       by sending the following command:
3799    
3800          SET FX_SEND MIDI_CONTROLLER <sampler-chan> <fx-send-id> <midi-
3801          ctrl>
3802    
3803       Where <sampler-chan> is the sampler channel number as returned by the
3804    
3805  Schoenebeck               Expires July 2, 2007                 [Page 65]  
3806    
3807    Schoenebeck              Expires October 3, 2008               [Page 68]
3808    
3809  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
3810    
3811    
3812       "ADD CHANNEL" (Section 6.4.5) or "LIST CHANNELS" (Section 6.4.4)
3813       command, <fx-send-id> reflects the numerical ID of the effect send
3814       entity as returned by the "CREATE FX_SEND" (Section 6.4.25) or "LIST
3815       FX_SENDS" (Section 6.4.28) command and <midi-ctrl> reflects the MIDI
3816       controller which shall be able to modify the effect send's send
3817       level.
3818    
3819       Possible Answers:
3820    
3821          "OK" -
3822    
3823             on success
3824    
3825          "WRN:<warning-code>:<warning-message>" -
3826    
3827             if MIDI controller was set, but there are noteworthy issue(s)
3828             related, providing an appropriate warning code and warning
3829             message
3830    
3831          "ERR:<error-code>:<error-message>" -
3832    
3833             in case it failed, providing an appropriate error code and
3834             error message
3835    
3836     Example:     Example:
3837    
3838        C: "SET FX_SEND AUDIO_OUTPUT_CHANNEL 0 0 0 2"        C: "SET FX_SEND MIDI_CONTROLLER 0 0 91"
3839    
3840          S: "OK"
3841    
3842    6.4.33.  Altering effect send's send level
3843    
3844       The front-end can alter the current send level of an effect send
3845       entity by sending the following command:
3846    
3847          SET FX_SEND LEVEL <sampler-chan> <fx-send-id> <volume>
3848    
3849       Where <sampler-chan> is the sampler channel number as returned by the
3850       "ADD CHANNEL" (Section 6.4.5) or "LIST CHANNELS" (Section 6.4.4)
3851       command, <fx-send-id> reflects the numerical ID of the effect send
3852       entity as returned by the "CREATE FX_SEND" (Section 6.4.25) or "LIST
3853       FX_SENDS" (Section 6.4.28) command and <volume> is an optionally
3854       dotted positive number (a value smaller than 1.0 means attenuation,
3855       whereas a value greater than 1.0 means amplification) reflecting the
3856       new send level.
3857    
3858       Possible Answers:
3859    
3860    
3861    
3862    
3863    Schoenebeck              Expires October 3, 2008               [Page 69]
3864    
3865    Internet-Draft        LinuxSampler Control Protocol           April 2008
3866    
3867    
3868          "OK" -
3869    
3870             on success
3871    
3872          "WRN:<warning-code>:<warning-message>" -
3873    
3874             if new send level was set, but there are noteworthy issue(s)
3875             related, providing an appropriate warning code and warning
3876             message
3877    
3878          "ERR:<error-code>:<error-message>" -
3879    
3880             in case it failed, providing an appropriate error code and
3881             error message
3882    
3883       Example:
3884    
3885          C: "SET FX_SEND LEVEL 0 0 0.15"
3886    
3887        S: "OK"        S: "OK"
3888    
3889  6.4.31.  Resetting a sampler channel  6.4.34.  Resetting a sampler channel
3890    
3891     The front-end can reset a particular sampler channel by sending the     The front-end can reset a particular sampler channel by sending the
3892     following command:     following command:
# Line 3673  Internet-Draft        LinuxSampler Contr Line 3912  Internet-Draft        LinuxSampler Contr
3912    
3913        "ERR:<error-code>:<error-message>" -        "ERR:<error-code>:<error-message>" -
3914    
3915    
3916    
3917    
3918    
3919    Schoenebeck              Expires October 3, 2008               [Page 70]
3920    
3921    Internet-Draft        LinuxSampler Control Protocol           April 2008
3922    
3923    
3924           in case it failed, providing an appropriate error code and           in case it failed, providing an appropriate error code and
3925           error message           error message
3926    
# Line 3690  Internet-Draft        LinuxSampler Contr Line 3938  Internet-Draft        LinuxSampler Contr
3938     The front-end can register itself to the LinuxSampler application to     The front-end can register itself to the LinuxSampler application to
3939     be informed about noteworthy events by sending this command:     be informed about noteworthy events by sending this command:
3940    
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 66]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
3941        SUBSCRIBE <event-id>        SUBSCRIBE <event-id>
3942    
3943     where <event-id> will be replaced by the respective event that client     where <event-id> will be replaced by the respective event that client
# Line 3728  Internet-Draft        LinuxSampler Contr Line 3969  Internet-Draft        LinuxSampler Contr
3969     The front-end can unregister itself if it doesn't want to receive     The front-end can unregister itself if it doesn't want to receive
3970     event messages anymore by sending the following command:     event messages anymore by sending the following command:
3971    
3972    
3973    
3974    
3975    Schoenebeck              Expires October 3, 2008               [Page 71]
3976    
3977    Internet-Draft        LinuxSampler Control Protocol           April 2008
3978    
3979    
3980        UNSUBSCRIBE <event-id>        UNSUBSCRIBE <event-id>
3981    
3982     Where <event-id> will be replaced by the respective event that client     Where <event-id> will be replaced by the respective event that client
# Line 3745  Internet-Draft        LinuxSampler Contr Line 3994  Internet-Draft        LinuxSampler Contr
3994           related, providing an appropriate warning code and warning           related, providing an appropriate warning code and warning
3995           message           message
3996    
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 67]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
3997        "ERR:<error-code>:<error-message>" -        "ERR:<error-code>:<error-message>" -
3998    
3999           in case it failed, providing an appropriate error code and           in case it failed, providing an appropriate error code and
# Line 3782  Internet-Draft        LinuxSampler Contr Line 4023  Internet-Draft        LinuxSampler Contr
4023    
4024           usually           usually
4025    
4026    
4027    
4028    
4029    
4030    
4031    Schoenebeck              Expires October 3, 2008               [Page 72]
4032    
4033    Internet-Draft        LinuxSampler Control Protocol           April 2008
4034    
4035    
4036        "ERR:<error-code>:<error-message>" -        "ERR:<error-code>:<error-message>" -
4037    
4038           on syntax error, e.g. non boolean value           on syntax error, e.g. non boolean value
# Line 3800  Internet-Draft        LinuxSampler Contr Line 4051  Internet-Draft        LinuxSampler Contr
4051     This is probably more interesting for manual telnet connections to     This is probably more interesting for manual telnet connections to
4052     LinuxSampler than really useful for a front-end implementation.     LinuxSampler than really useful for a front-end implementation.
4053    
   
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 68]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
4054  6.6.  Global commands  6.6.  Global commands
4055    
4056     The following commands have global impact on the sampler.     The following commands have global impact on the sampler.
# Line 3837  Internet-Draft        LinuxSampler Contr Line 4079  Internet-Draft        LinuxSampler Contr
4079        LinuxSampler will answer by returning the maximum number of active        LinuxSampler will answer by returning the maximum number of active
4080        voices.        voices.
4081    
 6.6.3.  Reset sampler  
4082    
    The front-end can reset the whole sampler by sending the following  
    command:  
4083    
       RESET  
4084    
    Possible Answers:  
4085    
       "OK" -  
4086    
4087           always  Schoenebeck              Expires October 3, 2008               [Page 73]
4088    
4089    Internet-Draft        LinuxSampler Control Protocol           April 2008
4090    
    Examples:  
4091    
4092    6.6.3.  Current number of active disk streams
4093    
4094       The front-end can ask for the current number of active disk streams
4095       on the sampler by sending the following command:
4096    
4097          GET TOTAL_STREAM_COUNT
4098    
4099       Possible Answers:
4100    
4101          LinuxSampler will answer by returning the number of all active
4102          disk streams on the sampler.
4103    
4104    6.6.4.  Reset sampler
4105    
4106       The front-end can reset the whole sampler by sending the following
4107       command:
4108    
4109          RESET
4110    
4111       Possible Answers:
4112    
4113  Schoenebeck               Expires July 2, 2007                 [Page 69]        "OK" -
4114    
4115  Internet-Draft        LinuxSampler Control Protocol        December 2006           always
4116    
4117       Examples:
4118    
4119  6.6.4.  General sampler informations  
4120    
4121    6.6.5.  General sampler informations
4122    
4123     The client can ask for general informations about the LinuxSampler     The client can ask for general informations about the LinuxSampler
4124     instance by sending the following command:     instance by sending the following command:
# Line 3884  Internet-Draft        LinuxSampler Contr Line 4137  Internet-Draft        LinuxSampler Contr
4137    
4138           DESCRIPTION -           DESCRIPTION -
4139    
4140              arbitrary textual description about the sampler  
4141    
4142    
4143    Schoenebeck              Expires October 3, 2008               [Page 74]
4144    
4145    Internet-Draft        LinuxSampler Control Protocol           April 2008
4146    
4147    
4148                arbitrary textual description about the sampler (note that
4149                the character string may contain escape sequences
4150                (Section 7.1))
4151    
4152           VERSION -           VERSION -
4153    
# Line 3895  Internet-Draft        LinuxSampler Contr Line 4158  Internet-Draft        LinuxSampler Contr
4158              version of the LSCP specification the sampler complies with              version of the LSCP specification the sampler complies with
4159              (see Section 2 for details)              (see Section 2 for details)
4160    
4161             INSTRUMENTS_DB_SUPPORT -
4162    
4163                either yes or no, specifies whether the sampler is build
4164                with instruments database support.
4165    
4166     The mentioned fields above don't have to be in particular order.     The mentioned fields above don't have to be in particular order.
4167     Other fields might be added in future.     Other fields might be added in future.
4168    
4169  6.6.5.  Getting global volume attenuation  6.6.6.  Getting global volume attenuation
4170    
4171     The client can ask for the current global sampler-wide volume     The client can ask for the current global sampler-wide volume
4172     attenuation by sending the following command:     attenuation by sending the following command:
# Line 3913  Internet-Draft        LinuxSampler Contr Line 4181  Internet-Draft        LinuxSampler Contr
4181    
4182     Note: it is up to the respective sampler engine whether to obey that     Note: it is up to the respective sampler engine whether to obey that
4183     global volume parameter or not, but in general all engines SHOULD use     global volume parameter or not, but in general all engines SHOULD use
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 70]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
4184     this parameter.     this parameter.
4185    
4186  6.6.6.  Setting global volume attenuation  6.6.7.  Setting global volume attenuation
4187    
4188     The client can alter the current global sampler-wide volume     The client can alter the current global sampler-wide volume
4189     attenuation by sending the following command:     attenuation by sending the following command:
# Line 3933  Internet-Draft        LinuxSampler Contr Line 4193  Internet-Draft        LinuxSampler Contr
4193     Where <volume> should be replaced by the optional dotted floating     Where <volume> should be replaced by the optional dotted floating
4194     point value, reflecting the new global volume parameter.  This value     point value, reflecting the new global volume parameter.  This value
4195     might usually be in the range between 0.0 and 1.0, that is for     might usually be in the range between 0.0 and 1.0, that is for
4196    
4197    
4198    
4199    Schoenebeck              Expires October 3, 2008               [Page 75]
4200    
4201    Internet-Draft        LinuxSampler Control Protocol           April 2008
4202    
4203    
4204     attenuating the overall volume.     attenuating the overall volume.
4205    
4206     Possible Answers:     Possible Answers:
# Line 3969  Internet-Draft        LinuxSampler Contr Line 4237  Internet-Draft        LinuxSampler Contr
4237     front-end has to explicitly create at least one map, add entries to     front-end has to explicitly create at least one map, add entries to
4238     the map and tell the respective sampler channel(s) which MIDI     the map and tell the respective sampler channel(s) which MIDI
4239     instrument map to use, so the sampler knows how to react on a given     instrument map to use, so the sampler knows how to react on a given
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 71]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
4240     program change message on the respective sampler channel, that is by     program change message on the respective sampler channel, that is by
4241     switching to the respectively defined engine type and loading the     switching to the respectively defined engine type and loading the
4242     respective instrument.  See command "SET CHANNEL MIDI_INSTRUMENT_MAP"     respective instrument.  See command "SET CHANNEL MIDI_INSTRUMENT_MAP"
# Line 3990  Internet-Draft        LinuxSampler Contr Line 4250  Internet-Draft        LinuxSampler Contr
4250     sampler to switch to the respective instrument as reflected by the     sampler to switch to the respective instrument as reflected by the
4251     current MIDI instrument map.     current MIDI instrument map.
4252    
4253    
4254    
4255    Schoenebeck              Expires October 3, 2008               [Page 76]
4256    
4257    Internet-Draft        LinuxSampler Control Protocol           April 2008
4258    
4259    
4260  6.7.1.  Create a new MIDI instrument map  6.7.1.  Create a new MIDI instrument map
4261    
4262     The front-end can add a new MIDI instrument map by sending the     The front-end can add a new MIDI instrument map by sending the
# Line 3998  Internet-Draft        LinuxSampler Contr Line 4265  Internet-Draft        LinuxSampler Contr
4265        ADD MIDI_INSTRUMENT_MAP [<name>]        ADD MIDI_INSTRUMENT_MAP [<name>]
4266    
4267     Where <name> is an optional argument allowing to assign a custom name     Where <name> is an optional argument allowing to assign a custom name
4268     to the new map.  MIDI instrument Map names do not have to be unique.     to the new map.  MIDI instrument Map names do not have to be unique,
4269       but MUST be encapsulated into apostrophes and support escape
4270       sequences as described in chapter "Character Set and Escape Sequences
4271       (Section 7.1)".
4272    
4273     Possible Answers:     Possible Answers:
4274    
# Line 4024  Internet-Draft        LinuxSampler Contr Line 4294  Internet-Draft        LinuxSampler Contr
4294    
4295        C: "ADD MIDI_INSTRUMENT_MAP"        C: "ADD MIDI_INSTRUMENT_MAP"
4296    
   
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 72]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
4297        S: "OK[5]"        S: "OK[5]"
4298    
4299  6.7.2.  Delete one particular or all MIDI instrument maps  6.7.2.  Delete one particular or all MIDI instrument maps
# Line 4045  Internet-Draft        LinuxSampler Contr Line 4306  Internet-Draft        LinuxSampler Contr
4306     Where <map> reflects the unique ID of the map to delete as returned     Where <map> reflects the unique ID of the map to delete as returned
4307     by the "LIST MIDI_INSTRUMENT_MAPS" (Section 6.7.4) command.     by the "LIST MIDI_INSTRUMENT_MAPS" (Section 6.7.4) command.
4308    
4309    
4310    
4311    Schoenebeck              Expires October 3, 2008               [Page 77]
4312    
4313    Internet-Draft        LinuxSampler Control Protocol           April 2008
4314    
4315    
4316     The front-end can delete all MIDI instrument maps by sending the     The front-end can delete all MIDI instrument maps by sending the
4317     following command:     following command:
4318    
# Line 4079  Internet-Draft        LinuxSampler Contr Line 4347  Internet-Draft        LinuxSampler Contr
4347    
4348     Possible Answers:     Possible Answers:
4349    
   
   
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 73]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
4350        The sampler will answer by returning the current number of MIDI        The sampler will answer by returning the current number of MIDI
4351        instrument maps.        instrument maps.
4352    
# Line 4104  Internet-Draft        LinuxSampler Contr Line 4362  Internet-Draft        LinuxSampler Contr
4362     current list of MIDI instrument maps, the front-end can send the     current list of MIDI instrument maps, the front-end can send the
4363     following command:     following command:
4364    
4365    
4366    
4367    Schoenebeck              Expires October 3, 2008               [Page 78]
4368    
4369    Internet-Draft        LinuxSampler Control Protocol           April 2008
4370    
4371    
4372        LIST MIDI_INSTRUMENT_MAPS        LIST MIDI_INSTRUMENT_MAPS
4373    
4374     Possible Answers:     Possible Answers:
# Line 4138  Internet-Draft        LinuxSampler Contr Line 4403  Internet-Draft        LinuxSampler Contr
4403    
4404    
4405    
4406             NAME -
4407    
4408                custom name of the given map, which does not have to be
4409                unique (note that this character string may contain escape
4410                sequences (Section 7.1))
4411    
4412  Schoenebeck               Expires July 2, 2007                 [Page 74]           DEFAULT -
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
4413    
4414                either true or false, defines whether this map is the
4415                default map
4416    
4417       The mentioned fields above don't have to be in particular order.
4418    
4419       Example:
4420    
          NAME -  
4421    
             custom name of the given map, which does not have to be  
             unique  
4422    
4423     The mentioned fields above don't have to be in particular order.  Schoenebeck              Expires October 3, 2008               [Page 79]
4424    
4425    Internet-Draft        LinuxSampler Control Protocol           April 2008
4426    
    Example:  
4427    
4428        C: "GET MIDI_INSTRUMENT_MAP INFO 0"        C: "GET MIDI_INSTRUMENT_MAP INFO 0"
4429    
4430        S: "NAME: Standard Map"        S: "NAME: Standard Map"
4431    
4432             "DEFAULT: true"
4433    
4434           "."           "."
4435    
4436  6.7.6.  Renaming a MIDI instrument map  6.7.6.  Renaming a MIDI instrument map
# Line 4170  Internet-Draft        LinuxSampler Contr Line 4441  Internet-Draft        LinuxSampler Contr
4441        SET MIDI_INSTRUMENT_MAP NAME <map> <name>        SET MIDI_INSTRUMENT_MAP NAME <map> <name>
4442    
4443     Where <map> is the numerical ID of the map and <name> the new custom     Where <map> is the numerical ID of the map and <name> the new custom
4444     name of the map, which does not have to be unique.     name of the map, which does not have to be unique (name MUST be
4445       encapsulated into apostrophes and supports escape sequences as
4446       described in chapter "Character Set and Escape Sequences
4447       (Section 7.1)").
4448    
4449     Possible Answers:     Possible Answers:
4450    
# Line 4193  Internet-Draft        LinuxSampler Contr Line 4467  Internet-Draft        LinuxSampler Contr
4467     The front-end can create a new or replace an existing entry in a     The front-end can create a new or replace an existing entry in a
4468     sampler's MIDI instrument map by sending the following command:     sampler's MIDI instrument map by sending the following command:
4469    
4470          MAP MIDI_INSTRUMENT [NON_MODAL] <map> <midi_bank> <midi_prog>
4471          <engine_name> <filename> <instrument_index> <volume_value>
4472          [<instr_load_mode>] [<name>]
4473    
4474       Where <map> is the numeric ID of the map to alter, <midi_bank> is an
4475       integer value between 0..16383 reflecting the MIDI bank select index,
4476    
4477    
 Schoenebeck               Expires July 2, 2007                 [Page 75]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
4478    
4479    Schoenebeck              Expires October 3, 2008               [Page 80]
4480    
4481    Internet-Draft        LinuxSampler Control Protocol           April 2008
4482    
       MAP MIDI_INSTRUMENT <map> <midi_bank> <midi_prog> <engine_name>  
       <filename> <instrument_index> <volume_value> [<instr_load_mode>]  
       [<name>]  
4483    
    Where <map> is the numeric ID of the map to alter, <midi_bank> is an  
    integer value between 0..16383 reflecting the MIDI bank select index,  
4484     <midi_prog> an integer value between 0..127 reflecting the MIDI     <midi_prog> an integer value between 0..127 reflecting the MIDI
4485     program change index, <engine_name> a sampler engine name as returned     program change index, <engine_name> a sampler engine name as returned
4486     by the "LIST AVAILABLE_ENGINES" (Section 6.4.8) command (not     by the "LIST AVAILABLE_ENGINES" (Section 6.4.8) command (not
4487     encapsulated into apostrophes), <filename> the name of the     encapsulated into apostrophes), <filename> the name of the
4488     instrument's file to be deployed (encapsulated into apostrophes),     instrument's file to be deployed (encapsulated into apostrophes,
4489     <instrument_index> the index (integer value) of the instrument within     supporting escape sequences as described in chapter "Character Set
4490     the given file, <volume_value> reflects the master volume of the     and Escape Sequences (Section 7.1)"), <instrument_index> the index
4491     instrument as optionally dotted number (where a value < 1.0 means     (integer value) of the instrument within the given file,
4492     attenuation and a value > 1.0 means amplification).  This parameter     <volume_value> reflects the master volume of the instrument as
4493     easily allows to adjust the volume of all intruments within a custom     optionally dotted number (where a value < 1.0 means attenuation and a
4494     instrument map without having to adjust their instrument files.  The     value > 1.0 means amplification).  This parameter easily allows to
4495     OPTIONAL <instr_load_mode> argument defines the life time of the     adjust the volume of all intruments within a custom instrument map
4496     instrument, that is when the instrument should be loaded, when freed     without having to adjust their instrument files.  The OPTIONAL
4497     and has exactly the following possibilities:     <instr_load_mode> argument defines the life time of the instrument,
4498       that is when the instrument should be loaded, when freed and has
4499       exactly the following possibilities:
4500    
4501        "ON_DEMAND" -        "ON_DEMAND" -
4502    
# Line 4241  Internet-Draft        LinuxSampler Contr Line 4517  Internet-Draft        LinuxSampler Contr
4517    
4518        "PERSISTENT" -        "PERSISTENT" -
4519    
4520           The instrument will immediately be loaded into memory in the           The instrument will immediately be loaded into memory when this
4521           background when this mapping command is sent and the instrument           mapping command is sent and the instrument is kept all the
4522           is kept all the time.  Instruments with this mode are only           time.  Instruments with this mode are only freed when the
4523           freed when the sampler is reset or all mapping entries with           sampler is reset or all mapping entries with this mode (and
4524           this mode (and respective instrument) are explicitly changed to           respective instrument) are explicitly changed to "ON_DEMAND"
4525           "ON_DEMAND" and no sampler channel is using the instrument           and no sampler channel is using the instrument anymore.
          anymore.  
4526    
4527          not supplied -
4528    
4529             In case there is no <instr_load_mode> argument given, it will
4530             be up to the InstrumentManager to decide which mode to use.
4531             Usually it will use "ON_DEMAND" if an entry for the given
4532    
4533    
4534    
4535  Schoenebeck               Expires July 2, 2007                 [Page 76]  Schoenebeck              Expires October 3, 2008               [Page 81]
4536    
4537  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
4538    
4539    
       not supplied -  
   
          In case there is no <instr_load_mode> argument given, it will  
          be up to the InstrumentManager to decide which mode to use.  
          Usually it will use "ON_DEMAND" if an entry for the given  
4540           instrument does not exist in the InstrumentManager's list yet,           instrument does not exist in the InstrumentManager's list yet,
4541           otherwise if an entry already exists, it will simply stick with           otherwise if an entry already exists, it will simply stick with
4542           the mode currently reflected by the already existing entry,           the mode currently reflected by the already existing entry,
# Line 4282  Internet-Draft        LinuxSampler Contr Line 4557  Internet-Draft        LinuxSampler Contr
4557     frontend should retrieve the actual mode by i.e. sending "GET     frontend should retrieve the actual mode by i.e. sending "GET
4558     MIDI_INSTRUMENT INFO" (Section 6.7.11) command(s).  Finally the     MIDI_INSTRUMENT INFO" (Section 6.7.11) command(s).  Finally the
4559     OPTIONAL <name> argument allows to set a custom name (encapsulated     OPTIONAL <name> argument allows to set a custom name (encapsulated
4560     into apostrophes) for the mapping entry, useful for frontends for     into apostrophes, supporting escape sequences as described in chapter
4561     displaying an appropriate name for mapped instruments (using "GET     "Character Set and Escape Sequences (Section 7.1)") for the mapping
4562     MIDI_INSTRUMENT INFO" (Section 6.7.11)).     entry, useful for frontends for displaying an appropriate name for
4563       mapped instruments (using "GET MIDI_INSTRUMENT INFO"
4564     The "MAP MIDI_INSTRUMENT" command will immediately return, thus it     (Section 6.7.11)).
4565     will not block when an instrument is to be loaded due to a  
4566     "PERSISTENT" type entry as instruments are loaded in the background.     By default, "MAP MIDI_INSTRUMENT" commands block until the mapping is
4567     As a consequence this command may not necessarily return an error     completely established in the sampler.  The OPTIONAL "NON_MODAL"
4568     i.e. when the given instrument file does not exist or may turn out to     argument however causes the respective "MAP MIDI_INSTRUMENT" command
4569     be corrupt.     to return immediately, that is to let the sampler establish the
4570       mapping in the background.  So this argument might be especially
4571       useful for mappings with a "PERSISTENT" type, because these have to
4572       load the respective instruments immediately and might thus block for
4573       a very long time.  It is recommended however to use the OPTIONAL
4574       "NON_MODAL" argument only if really necessary, because it has the
4575       following drawbacks: as "NON_MODAL" instructions return immediately,
4576       they may not necessarily return an error i.e. when the given
4577       instrument file turns out to be corrupt, beside that subsequent
4578       commands in a LSCP instruction sequence might fail, because mandatory
4579       mappings are not yet completed.
4580    
4581     Possible Answers:     Possible Answers:
4582    
# Line 4299  Internet-Draft        LinuxSampler Contr Line 4584  Internet-Draft        LinuxSampler Contr
4584    
4585           usually           usually
4586    
       "ERR:<error-code>:<error-message>" -  
4587    
          when the given map or engine does not exist or a value is out  
          of range  
4588    
    Examples:  
4589    
4590    
4591    Schoenebeck              Expires October 3, 2008               [Page 82]
 Schoenebeck               Expires July 2, 2007                 [Page 77]  
4592    
4593  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
4594    
4595    
4596          "ERR:<error-code>:<error-message>" -
4597    
4598             when the given map or engine does not exist or a value is out
4599             of range
4600    
4601       Examples:
4602    
4603        C: "MAP MIDI_INSTRUMENT 0 3 0 gig '/usr/share/Steinway D.gig' 0        C: "MAP MIDI_INSTRUMENT 0 3 0 gig '/usr/share/Steinway D.gig' 0
4604        0.8 PERSISTENT"        0.8 PERSISTENT"
# Line 4333  Internet-Draft        LinuxSampler Contr Line 4620  Internet-Draft        LinuxSampler Contr
4620    
4621        S: "OK"        S: "OK"
4622    
4623        C: "MAP MIDI_INSTRUMENT 1 8 120 gig '/home/joe/foodrums.gig' 0 1.0        C: "MAP MIDI_INSTRUMENT NON_MODAL 1 8 120 gig '/home/joe/
4624        PERSISTENT 'Foo Drumkit'"        foodrums.gig' 0 1.0 PERSISTENT 'Foo Drumkit'"
4625    
4626        S: "OK"        S: "OK"
4627    
# Line 4352  Internet-Draft        LinuxSampler Contr Line 4639  Internet-Draft        LinuxSampler Contr
4639    
4640     Possible Answers:     Possible Answers:
4641    
       The sampler will answer by sending the current number of entries  
       in the MIDI instrument map(s).  
4642    
    Example:  
4643    
       C: "GET MIDI_INSTRUMENTS 0"  
4644    
       S: "234"  
4645    
4646    
4647    Schoenebeck              Expires October 3, 2008               [Page 83]
4648    
4649    Internet-Draft        LinuxSampler Control Protocol           April 2008
4650    
4651    
4652  Schoenebeck               Expires July 2, 2007                 [Page 78]        The sampler will answer by sending the current number of entries
4653          in the MIDI instrument map(s).
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
4654    
4655       Example:
4656    
4657          C: "GET MIDI_INSTRUMENTS 0"
4658    
4659          S: "234"
4660    
4661        C: "GET MIDI_INSTRUMENTS ALL"        C: "GET MIDI_INSTRUMENTS ALL"
4662    
# Line 4408  Internet-Draft        LinuxSampler Contr Line 4697  Internet-Draft        LinuxSampler Contr
4697     The front-end can delete an entry from a MIDI instrument map by     The front-end can delete an entry from a MIDI instrument map by
4698     sending the following command:     sending the following command:
4699    
4700    
4701    
4702    
4703    Schoenebeck              Expires October 3, 2008               [Page 84]
4704    
4705    Internet-Draft        LinuxSampler Control Protocol           April 2008
4706    
4707    
4708        UNMAP MIDI_INSTRUMENT <map> <midi_bank> <midi_prog>        UNMAP MIDI_INSTRUMENT <map> <midi_bank> <midi_prog>
4709    
4710     Where <map> is the numeric ID of the MIDI instrument map, <midi_bank>     Where <map> is the numeric ID of the MIDI instrument map, <midi_bank>
# Line 4417  Internet-Draft        LinuxSampler Contr Line 4714  Internet-Draft        LinuxSampler Contr
4714    
4715     Possible Answers:     Possible Answers:
4716    
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 79]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
4717        "OK" -        "OK" -
4718    
4719           usually           usually
# Line 4464  Internet-Draft        LinuxSampler Contr Line 4753  Internet-Draft        LinuxSampler Contr
4753    
4754           Name for this MIDI instrument map entry (if defined).  This           Name for this MIDI instrument map entry (if defined).  This
4755           name shall be used by frontends for displaying a name for this           name shall be used by frontends for displaying a name for this
          mapped instrument.  It can be set and changed with the "MAP  
          MIDI_INSTRUMENT" (Section 6.7.7) command and does not have to  
          be unique.  
   
       "ENGINE_NAME" -  
4756    
          Name of the engine to be deployed for this instrument.  
4757    
4758    
4759    Schoenebeck              Expires October 3, 2008               [Page 85]
4760    
4761    Internet-Draft        LinuxSampler Control Protocol           April 2008
4762    
4763    
4764             mapped instrument.  It can be set and changed with the "MAP
4765             MIDI_INSTRUMENT" (Section 6.7.7) command and does not have to
4766             be unique. (note that this character string may contain escape
4767             sequences (Section 7.1))
4768    
4769  Schoenebeck               Expires July 2, 2007                 [Page 80]        "ENGINE_NAME" -
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
4770    
4771             Name of the engine to be deployed for this instrument.
4772    
4773        "INSTRUMENT_FILE" -        "INSTRUMENT_FILE" -
4774    
4775           File name of the instrument.           File name of the instrument (note that this path may contain
4776             escape sequences (Section 7.1)).
4777    
4778        "INSTRUMENT_NR" -        "INSTRUMENT_NR" -
4779    
# Line 4493  Internet-Draft        LinuxSampler Contr Line 4783  Internet-Draft        LinuxSampler Contr
4783    
4784           Name of the loaded instrument as reflected by its file.  In           Name of the loaded instrument as reflected by its file.  In
4785           contrast to the "NAME" field, the "INSTRUMENT_NAME" field           contrast to the "NAME" field, the "INSTRUMENT_NAME" field
4786           cannot be changed.           cannot be changed (note that this character string may contain
4787             escape sequences (Section 7.1)).
4788    
4789        "LOAD_MODE" -        "LOAD_MODE" -
4790    
# Line 4518  Internet-Draft        LinuxSampler Contr Line 4809  Internet-Draft        LinuxSampler Contr
4809    
4810           "INSTRUMENT_FILE: /usr/share/joesdrumkit.gig"           "INSTRUMENT_FILE: /usr/share/joesdrumkit.gig"
4811    
          "INSTRUMENT_NR: 0"  
4812    
          "INSTRUMENT_NAME: Joe's Drumkit"  
4813    
          "LOAD_MODE: PERSISTENT"  
4814    
4815           "VOLUME: 1.0"  Schoenebeck              Expires October 3, 2008               [Page 86]
4816    
4817           "."  Internet-Draft        LinuxSampler Control Protocol           April 2008
4818    
4819    
4820             "INSTRUMENT_NR: 0"
4821    
4822             "INSTRUMENT_NAME: Joe's Drumkit"
4823    
4824             "LOAD_MODE: PERSISTENT"
4825    
4826  Schoenebeck               Expires July 2, 2007                 [Page 81]           "VOLUME: 1.0"
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
4827    
4828             "."
4829    
4830  6.7.12.  Clear MIDI instrument map  6.7.12.  Clear MIDI instrument map
4831    
# Line 4578  Internet-Draft        LinuxSampler Contr Line 4868  Internet-Draft        LinuxSampler Contr
4868    
4869    
4870    
4871    Schoenebeck              Expires October 3, 2008               [Page 87]
4872    
4873    Internet-Draft        LinuxSampler Control Protocol           April 2008
4874    
4875    
4876    6.8.  Managing Instruments Database
4877    
4878       The following commands describe how to use and manage the instruments
4879       database.
4880    
4881       Notice:
4882    
4883          All command arguments representing a path or instrument/directory
4884          name support escape sequences as described in chapter "Character
4885          Set and Escape Sequences (Section 7.1)".
4886    
4887          All occurrences of a forward slash in instrument and directory
4888          names are escaped with its hex (\x2f) or octal (\057) escape
4889          sequence.
4890    
4891    6.8.1.  Creating a new instrument directory
4892    
4893       The front-end can add a new instrument directory to the instruments
4894       database by sending the following command:
4895    
4896          ADD DB_INSTRUMENT_DIRECTORY <dir>
4897    
4898       Where <dir> is the absolute path name of the directory to be created
4899       (encapsulated into apostrophes).
4900    
4901       Possible Answers:
4902    
4903          "OK" -
4904    
4905             on success
4906    
4907          "ERR:<error-code>:<error-message>" -
4908    
4909             when the directory could not be created, which can happen if
4910             the directory already exists or the name contains not allowed
4911             symbols
4912    
4913       Examples:
4914    
4915          C: "ADD DB_INSTRUMENT_DIRECTORY '/Piano Collection'"
4916    
4917          S: "OK"
4918    
4919    6.8.2.  Deleting an instrument directory
4920    
4921       The front-end can delete a particular instrument directory from the
4922       instruments database by sending the following command:
4923    
4924    
4925    
4926    
4927    Schoenebeck              Expires October 3, 2008               [Page 88]
4928    
4929    Internet-Draft        LinuxSampler Control Protocol           April 2008
4930    
4931    
4932          REMOVE DB_INSTRUMENT_DIRECTORY [FORCE] <dir>
4933    
4934       Where <dir> is the absolute path name of the directory to delete.
4935       The optional FORCE argument can be used to force the deletion of a
4936       non-empty directory and all its content.
4937    
4938       Possible Answers:
4939    
4940          "OK" -
4941    
4942             if the directory is deleted successfully
4943    
4944          "ERR:<error-code>:<error-message>" -
4945    
4946             if the given directory does not exist, or if trying to delete a
4947             non-empty directory, without using the FORCE argument.
4948    
4949       Examples:
4950    
4951          C: "REMOVE DB_INSTRUMENT_DIRECTORY FORCE '/Piano Collection'"
4952    
4953          S: "OK"
4954    
4955    6.8.3.  Getting amount of instrument directories
4956    
4957       The front-end can retrieve the current amount of directories in a
4958       specific directory by sending the following command:
4959    
4960          GET DB_INSTRUMENT_DIRECTORIES [RECURSIVE] <dir>
4961    
4962       Where <dir> should be replaced by the absolute path name of the
4963       directory.  If RECURSIVE is specified, the number of all directories,
4964       including those located in subdirectories of the specified directory,
4965       will be returned.
4966    
4967       Possible Answers:
4968    
4969          The current number of instrument directories in the specified
4970          directory.
4971    
4972          "ERR:<error-code>:<error-message>" -
4973    
4974             if the given directory does not exist.
4975    
4976       Example:
4977    
4978    
4979    
4980    
4981    
4982    
4983    Schoenebeck              Expires October 3, 2008               [Page 89]
4984    
4985    Internet-Draft        LinuxSampler Control Protocol           April 2008
4986    
4987    
4988          C: "GET DB_INSTRUMENT_DIRECTORIES '/'"
4989    
4990          S: "2"
4991    
4992    6.8.4.  Listing all directories in specific directory
4993    
4994       The front-end can retrieve the current list of directories in
4995       specific directory by sending the following command:
4996    
4997          LIST DB_INSTRUMENT_DIRECTORIES [RECURSIVE] <dir>
4998    
4999       Where <dir> should be replaced by the absolute path name of the
5000       directory.  If RECURSIVE is specified, the absolute path names of all
5001       directories, including those located in subdirectories of the
5002       specified directory, will be returned.
5003    
5004       Possible Answers:
5005    
5006          A comma separated list of all instrument directories (encapsulated
5007          into apostrophes) in the specified directory.
5008    
5009          "ERR:<error-code>:<error-message>" -
5010    
5011             if the given directory does not exist.
5012    
5013       Example:
5014    
5015          C: "LIST DB_INSTRUMENT_DIRECTORIES '/'"
5016    
5017          S: "'Piano Collection','Percussion Collection'"
5018    
5019          C: "LIST DB_INSTRUMENT_DIRECTORIES RECURSIVE '/'"
5020    
5021          S: "'/Piano Collection','/Piano Collection/Acoustic','/Piano
5022          Collection/Acoustic/New','/Percussion Collection'"
5023    
5024    6.8.5.  Getting instrument directory information
5025    
5026       The front-end can ask for the current settings of an instrument
5027       directory by sending the following command:
5028    
5029          GET DB_INSTRUMENT_DIRECTORY INFO <dir>
5030    
5031       Where <dir> should be replaced by the absolute path name of the
5032       directory the front-end is interested in.
5033    
5034       Possible Answers:
5035    
5036    
5037    
5038    
5039    Schoenebeck              Expires October 3, 2008               [Page 90]
5040    
5041    Internet-Draft        LinuxSampler Control Protocol           April 2008
5042    
5043    
5044          LinuxSampler will answer by sending a <CRLF> separated list.  Each
5045          answer line begins with the settings category name followed by a
5046          colon and then a space character <SP> and finally the info
5047          character string to that setting category.  At the moment the
5048          following categories are defined:
5049    
5050    
5051    
5052             DESCRIPTION -
5053    
5054                A brief description of the directory content.  Note that the
5055                character string may contain escape sequences (Section 7.1).
5056    
5057             CREATED -
5058    
5059                The creation date and time of the directory, represented in
5060                "YYYY-MM-DD HH:MM:SS" format
5061    
5062             MODIFIED -
5063    
5064                The date and time of the last modification of the directory,
5065                represented in "YYYY-MM-DD HH:MM:SS" format
5066    
5067       The mentioned fields above don't have to be in particular order.
5068    
5069       Example:
5070    
5071          C: "GET DB_INSTRUMENT_DIRECTORY INFO '/Piano Collection'"
5072    
5073          S: "DESCRIPTION: Piano collection of instruments in GigaSampler
5074          format."
5075    
5076             "CREATED: 2007-02-05 10:23:12"
5077    
5078             "MODIFIED: 2007-04-07 12:50:21"
5079    
5080             "."
5081    
5082    6.8.6.  Renaming an instrument directory
5083    
5084       The front-end can alter the name of a specific instrument directory
5085       by sending the following command:
5086    
5087          SET DB_INSTRUMENT_DIRECTORY NAME <dir> <name>
5088    
5089       Where <dir> is the absolute path name of the directory and <name> is
5090       the new name for that directory.
5091    
5092    
5093    
5094    
5095    Schoenebeck              Expires October 3, 2008               [Page 91]
5096    
5097    Internet-Draft        LinuxSampler Control Protocol           April 2008
5098    
5099    
5100       Possible Answers:
5101    
5102          "OK" -
5103    
5104             on success
5105    
5106          "ERR:<error-code>:<error-message>" -
5107    
5108             in case the given directory does not exists, or if a directory
5109             with name equal to the new name already exists.
5110    
5111       Example:
5112    
5113          C: "SET DB_INSTRUMENT_DIRECTORY NAME '/Piano Collection/Acustic'
5114          'Acoustic'"
5115    
5116          S: "OK"
5117    
5118    6.8.7.  Moving an instrument directory
5119    
5120       The front-end can move a specific instrument directory by sending the
5121       following command:
5122    
5123          MOVE DB_INSTRUMENT_DIRECTORY <dir> <dst>
5124    
5125       Where <dir> is the absolute path name of the directory to move and
5126       <dst> is the location where the directory will be moved to.
5127    
5128       Possible Answers:
5129    
5130          "OK" -
5131    
5132             on success
5133    
5134          "ERR:<error-code>:<error-message>" -
5135    
5136             in case a given directory does not exists, or if a directory
5137             with name equal to the name of the specified directory already
5138             exists in the destination directory.  Error is also thrown when
5139             trying to move a directory to a subdirectory of itself.
5140    
5141       Example:
5142    
5143          C: "MOVE DB_INSTRUMENT_DIRECTORY '/Acoustic' '/Piano Collection/
5144          Acoustic'"
5145    
5146          S: "OK"
5147    
5148    
5149    
5150    
5151    Schoenebeck              Expires October 3, 2008               [Page 92]
5152    
5153    Internet-Draft        LinuxSampler Control Protocol           April 2008
5154    
5155    
5156    6.8.8.  Copying instrument directories
5157    
5158       The front-end can copy a specific instrument directory by sending the
5159       following command:
5160    
5161          COPY DB_INSTRUMENT_DIRECTORY <dir> <dst>
5162    
5163       Where <dir> is the absolute path name of the directory to copy and
5164       <dst> is the location where the directory will be copied to.
5165    
5166       Possible Answers:
5167    
5168          "OK" -
5169    
5170             on success
5171    
5172          "ERR:<error-code>:<error-message>" -
5173    
5174             in case a given directory does not exists, or if a directory
5175             with name equal to the name of the specified directory already
5176             exists in the destination directory.  Error is also thrown when
5177             trying to copy a directory to a subdirectory of itself.
5178    
5179       Example:
5180    
5181          C: "COPY DB_INSTRUMENT_DIRECTORY '/Piano Collection/Acoustic'
5182          '/Acoustic/Pianos'"
5183    
5184          S: "OK"
5185    
5186    6.8.9.  Changing the description of directory
5187    
5188       The front-end can alter the description of a specific instrument
5189       directory by sending the following command:
5190    
5191          SET DB_INSTRUMENT_DIRECTORY DESCRIPTION <dir> <desc>
5192    
5193       Where <dir> is the absolute path name of the directory and <desc> is
5194       the new description for the directory (encapsulated into apostrophes,
5195       supporting escape sequences as described in chapter "Character Set
5196       and Escape Sequences (Section 7.1)").
5197    
5198       Possible Answers:
5199    
5200          "OK" -
5201    
5202             on success
5203    
5204    
5205    
5206    
5207    Schoenebeck              Expires October 3, 2008               [Page 93]
5208    
5209    Internet-Draft        LinuxSampler Control Protocol           April 2008
5210    
5211    
5212          "ERR:<error-code>:<error-message>" -
5213    
5214             in case the given directory does not exists.
5215    
5216       Example:
5217    
5218          C: "SET DB_INSTRUMENT_DIRECTORY DESCRIPTION '/Piano Collection' 'A
5219          collection of piano instruments in various format.'"
5220    
5221          S: "OK"
5222    
5223    6.8.10.  Finding directories
5224    
5225       The front-end can search for directories in specific directory by
5226       sending the following command:
5227    
5228          FIND DB_INSTRUMENT_DIRECTORIES [NON_RECURSIVE] <dir> <criteria-
5229          list>
5230    
5231       Where <dir> should be replaced by the absolute path name of the
5232       directory to search in.  If NON_RECURSIVE is specified, the
5233       directories located in subdirectories of the specified directory will
5234       not be searched. <criteria-list> is a list of search criterias in
5235       form of "key1=val1 key2=val2 ...".  The following criterias are
5236       allowed:
5237    
5238       NAME='<search-string>'
5239    
5240          Restricts the search to directories, which names satisfy the
5241          supplied search string (encapsulated into apostrophes, supporting
5242          escape sequences as described in chapter "Character Set and Escape
5243          Sequences (Section 7.1)").
5244    
5245       CREATED='[<date-after>]..[<date-before>]'
5246    
5247          Restricts the search to directories, which creation date satisfies
5248          the specified period, where <date-after> and <date-before> are in
5249          "YYYY-MM-DD HH:MM:SS" format.  If <date-after> is omitted the
5250          search is restricted to directories created before <date-before>.
5251          If <date-before> is omitted, the search is restricted to
5252          directories created after <date-after>.
5253    
5254       MODIFIED='[<date-after>]..[<date-before>]'
5255    
5256          Restricts the search to directories, which date of last
5257          modification satisfies the specified period, where <date-after>
5258          and <date-before> are in "YYYY-MM-DD HH:MM:SS" format.  If <date-
5259          after> is omitted the search is restricted to directories, which
5260    
5261    
5262    
5263    Schoenebeck              Expires October 3, 2008               [Page 94]
5264    
5265    Internet-Draft        LinuxSampler Control Protocol           April 2008
5266    
5267    
5268          are last modified before <date-before>.  If <date-before> is
5269          omitted, the search is restricted to directories, which are last
5270          modified after <date-after>.
5271    
5272       DESCRIPTION='<search-string>'
5273    
5274          Restricts the search to directories with description that
5275          satisfies the supplied search string (encapsulated into
5276          apostrophes, supporting escape sequences as described in chapter
5277          "Character Set and Escape Sequences (Section 7.1)").
5278    
5279       Where <search-string> is either a regular expression, or a word list
5280       separated with spaces for OR search and with '+' for AND search.
5281    
5282       Possible Answers:
5283    
5284          A comma separated list with the absolute path names (encapsulated
5285          into apostrophes) of all directories in the specified directory
5286          that satisfy the supplied search criterias.
5287    
5288          "ERR:<error-code>:<error-message>" -
5289    
5290             if the given directory does not exist.
5291    
5292       Example:
5293    
5294          C: "FIND DB_INSTRUMENT_DIRECTORIES '/' NAME='Piano'"
5295    
5296          S: "'/Piano Collection'"
5297    
5298          C: "FIND DB_INSTRUMENT_DIRECTORIES '/' CREATED='..2007-04-01 09:
5299          30:13'"
5300    
5301          S: "'/Piano Collection','/Percussions'"
5302    
5303    6.8.11.  Adding instruments to the instruments database
5304    
5305       The front-end can add one or more instruments to the instruments
5306       database by sending the following command:
5307    
5308          ADD DB_INSTRUMENTS [NON_MODAL] [<mode>] <db_dir> <file_path>
5309          [<instr_index>]
5310    
5311       Where <db_dir> is the absolute path name of a directory (encapsulated
5312       into apostrophes) in the instruments database in which only the new
5313       instruments (that are not already in the database) will be added,
5314       <file_path> is the absolute path name of a file or directory in the
5315       file system (encapsulated into apostrophes).  In case an instrument
5316    
5317    
5318    
5319    Schoenebeck              Expires October 3, 2008               [Page 95]
5320    
5321    Internet-Draft        LinuxSampler Control Protocol           April 2008
5322    
5323    
5324       file is supplied, only the instruments in the specified file will be
5325       added to the instruments database.  If the optional <instr_index>
5326       (the index of the instrument within the given file) is supplied too,
5327       then only the specified instrument will be added.  In case a
5328       directory is supplied, the instruments in that directory will be
5329       added.  The OPTIONAL <mode> argument is only applied when a directory
5330       is provided as <file_path> and specifies how the scanning will be
5331       done and has exactly the following possibilities:
5332    
5333          "RECURSIVE" -
5334    
5335             All instruments will be processed, including those in the
5336             subdirectories, and the respective subdirectory tree structure
5337             will be recreated in the instruments database
5338    
5339          "NON_RECURSIVE" -
5340    
5341             Only the instruments in the specified directory will be added,
5342             the instruments in the subdirectories will not be processed.
5343    
5344          "FLAT" -
5345    
5346             All instruments will be processed, including those in the
5347             subdirectories, but the respective subdirectory structure will
5348             not be recreated in the instruments database.  All instruments
5349             will be added directly in the specified database directory.
5350    
5351       The difference between regular and NON_MODAL versions of the command
5352       is that the regular command returns when the scanning is finished
5353       while NON_MODAL version returns immediately and a background process
5354       is launched.  The GET DB_INSTRUMENTS_JOB INFO (Section 6.8.21)
5355       command can be used to monitor the scanning progress.
5356    
5357       Possible Answers:
5358    
5359          "OK" -
5360    
5361             on success when NON_MODAL is not supplied
5362    
5363          "OK[<job-id>]" -
5364    
5365             on success when NON_MODAL is supplied, where <job-id> is a
5366             numerical ID used to obtain status information about the job
5367             progress.  See GET DB_INSTRUMENTS_JOB INFO (Section 6.8.21)
5368    
5369          "ERR:<error-code>:<error-message>" -
5370    
5371    
5372    
5373    
5374    
5375    Schoenebeck              Expires October 3, 2008               [Page 96]
5376    
5377    Internet-Draft        LinuxSampler Control Protocol           April 2008
5378    
5379    
5380             if an invalid path is specified.
5381    
5382       Examples:
5383    
5384          C: "ADD DB_INSTRUMENTS '/Piano Collection' '/home/me/gigs/PMI
5385          Bosendorfer 290.gig' 0"
5386    
5387          S: "OK"
5388    
5389    6.8.12.  Removing an instrument
5390    
5391       The front-end can remove a particular instrument from the instruments
5392       database by sending the following command:
5393    
5394          REMOVE DB_INSTRUMENT <instr_path>
5395    
5396       Where <instr_path> is the absolute path name (in the instruments
5397       database) of the instrument to remove.
5398    
5399       Possible Answers:
5400    
5401          "OK" -
5402    
5403             if the instrument is removed successfully
5404    
5405          "ERR:<error-code>:<error-message>" -
5406    
5407             if the given path does not exist or is a directory.
5408    
5409       Examples:
5410    
5411          C: "REMOVE DB_INSTRUMENT '/Piano Collection/Bosendorfer 290'"
5412    
5413          S: "OK"
5414    
5415    6.8.13.  Getting amount of instruments
5416    
5417       The front-end can retrieve the current amount of instruments in a
5418       specific directory by sending the following command:
5419    
5420          GET DB_INSTRUMENTS [RECURSIVE] <dir>
5421    
5422       Where <dir> should be replaced by the absolute path name of the
5423       directory.  If RECURSIVE is specified, the number of all instruments,
5424       including those located in subdirectories of the specified directory,
5425       will be returned.
5426    
5427       Possible Answers:
5428    
5429    
5430    
5431    Schoenebeck              Expires October 3, 2008               [Page 97]
5432    
5433    Internet-Draft        LinuxSampler Control Protocol           April 2008
5434    
5435    
5436          The current number of instruments in the specified directory.
5437    
5438          "ERR:<error-code>:<error-message>" -
5439    
5440             if the given directory does not exist.
5441    
5442       Example:
5443    
5444          C: "GET DB_INSTRUMENTS '/Piano Collection'"
5445    
5446          S: "2"
5447    
5448    6.8.14.  Listing all instruments in specific directory
5449    
5450       The front-end can retrieve the current list of instruments in
5451       specific directory by sending the following command:
5452    
5453          LIST DB_INSTRUMENTS [RECURSIVE] <dir>
5454    
5455       Where <dir> should be replaced by the absolute path name of the
5456       directory.  If RECURSIVE is specified, the absolute path names of all
5457       instruments, including those located in subdirectories of the
5458       specified directory, will be returned.
5459    
5460       Possible Answers:
5461    
5462          A comma separated list of all instruments (encapsulated into
5463          apostrophes) in the specified directory.
5464    
5465          "ERR:<error-code>:<error-message>" -
5466    
5467             if the given directory does not exist.
5468    
5469       Example:
5470    
5471          C: "LIST DB_INSTRUMENTS '/Piano Collection'"
5472    
5473          S: "'Bosendorfer 290','Steinway D'"
5474    
5475          C: "LIST DB_INSTRUMENTS RECURSIVE '/Piano Collection'"
5476    
5477          S: "'/Piano Collection/Bosendorfer 290','/Piano Collection/
5478          Steinway D','/Piano Collection/Lite/Free Piano'"
5479    
5480    
5481    
5482    
5483    
5484    
5485    
5486    
5487    Schoenebeck              Expires October 3, 2008               [Page 98]
5488    
5489    Internet-Draft        LinuxSampler Control Protocol           April 2008
5490    
5491    
5492    6.8.15.  Getting instrument information
5493    
5494       The front-end can ask for the current settings of an instrument by
5495       sending the following command:
5496    
5497          GET DB_INSTRUMENT INFO <instr_path>
5498    
5499       Where <instr_path> should be replaced by the absolute path name of
5500       the instrument the front-end is interested in.
5501    
5502       Possible Answers:
5503    
5504          LinuxSampler will answer by sending a <CRLF> separated list.  Each
5505          answer line begins with the settings category name followed by a
5506          colon and then a space character <SP> and finally the info
5507          character string to that setting category.  At the moment the
5508          following categories are defined:
5509    
5510    
5511    
5512             INSTRUMENT_FILE -
5513    
5514                File name of the instrument.  Note that the character string
5515                may contain escape sequences (Section 7.1).
5516    
5517             INSTRUMENT_NR -
5518    
5519                Index of the instrument within the file.
5520    
5521             FORMAT_FAMILY -
5522    
5523                The format family of the instrument.
5524    
5525             FORMAT_VERSION -
5526    
5527                The format version of the instrument.
5528    
5529             SIZE -
5530    
5531                The size of the instrument in bytes.
5532    
5533             CREATED -
5534    
5535                The date and time when the instrument is added in the
5536                instruments database, represented in "YYYY-MM-DD HH:MM:SS"
5537                format
5538    
5539    
5540    
5541    
5542    
5543    Schoenebeck              Expires October 3, 2008               [Page 99]
5544    
5545    Internet-Draft        LinuxSampler Control Protocol           April 2008
5546    
5547    
5548             MODIFIED -
5549    
5550                The date and time of the last modification of the
5551                instrument's database settings, represented in "YYYY-MM-DD
5552                HH:MM:SS" format
5553    
5554             DESCRIPTION -
5555    
5556                A brief description of the instrument.  Note that the
5557                character string may contain escape sequences (Section 7.1).
5558    
5559             IS_DRUM -
5560    
5561                either true or false, determines whether the instrument is a
5562                drumkit or a chromatic instrument
5563    
5564             PRODUCT -
5565    
5566                The product title of the instrument.  Note that the
5567                character string may contain escape sequences (Section 7.1).
5568    
5569             ARTISTS -
5570    
5571                Lists the artist names.  Note that the character string may
5572                contain escape sequences (Section 7.1).
5573    
5574             KEYWORDS -
5575    
5576                Provides a list of keywords that refer to the instrument.
5577                Keywords are separated with semicolon and blank.  Note that
5578                the character string may contain escape sequences
5579                (Section 7.1).
5580    
5581       The mentioned fields above don't have to be in particular order.
5582    
5583       Example:
5584    
5585          C: "GET DB_INSTRUMENT INFO '/Piano Collection/Bosendorfer 290'"
5586    
5587          S: "INSTRUMENT_FILE: /home/me/gigs/Bosendorfer 290.gig"
5588    
5589             "INSTRUMENT_NR: 0"
5590    
5591             "FORMAT_FAMILY: GIG"
5592    
5593             "FORMAT_VERSION: 2"
5594    
5595    
5596    
5597    
5598    
5599    Schoenebeck              Expires October 3, 2008              [Page 100]
5600    
5601    Internet-Draft        LinuxSampler Control Protocol           April 2008
5602    
5603    
5604             "SIZE: 2050871870"
5605    
5606             "CREATED: 2007-02-05 10:23:12"
5607    
5608             "MODIFIED: 2007-04-07 12:50:21"
5609    
5610             "DESCRIPTION: "
5611    
5612             "IS_DRUM: false"
5613    
5614             "PRODUCT: GRANDIOSO Bosendorfer 290"
5615    
5616             "ARTISTS: Post Musical Instruments"
5617    
5618             "KEYWORDS: Bosendorfer"
5619    
5620             "."
5621    
5622    6.8.16.  Renaming an instrument
5623    
5624       The front-end can alter the name of a specific instrument by sending
5625       the following command:
5626    
5627          SET DB_INSTRUMENT NAME <instr> <name>
5628    
5629       Where <instr> is the absolute path name of the instrument and <name>
5630       is the new name for that instrument.
5631    
5632       Possible Answers:
5633    
5634          "OK" -
5635    
5636             on success
5637    
5638          "ERR:<error-code>:<error-message>" -
5639    
5640             in case the given instrument does not exists, or if an
5641             instrument with name equal to the new name already exists.
5642    
5643       Example:
5644    
5645          C: "SET DB_INSTRUMENT NAME '/Piano Collection/Bosendorfer'
5646          'Bosendorfer 290'"
5647    
5648          S: "OK"
5649    
5650    
5651    
5652    
5653    
5654    
5655    Schoenebeck              Expires October 3, 2008              [Page 101]
5656    
5657    Internet-Draft        LinuxSampler Control Protocol           April 2008
5658    
5659    
5660    6.8.17.  Moving an instrument
5661    
5662       The front-end can move a specific instrument to another directory by
5663       sending the following command:
5664    
5665          MOVE DB_INSTRUMENT <instr> <dst>
5666    
5667       Where <instr> is the absolute path name of the instrument to move and
5668       <dst> is the directory where the instrument will be moved to.
5669    
5670       Possible Answers:
5671    
5672          "OK" -
5673    
5674             on success
5675    
5676          "ERR:<error-code>:<error-message>" -
5677    
5678             in case the given instrument does not exists, or if an
5679             instrument with name equal to the name of the specified
5680             instrument already exists in the destination directory.
5681    
5682       Example:
5683    
5684          C: "MOVE DB_INSTRUMENT '/Piano Collection/Bosendorfer 290' '/Piano
5685          Collection/Acoustic'"
5686    
5687          S: "OK"
5688    
5689    6.8.18.  Copying instruments
5690    
5691       The front-end can copy a specific instrument to another directory by
5692       sending the following command:
5693    
5694          COPY DB_INSTRUMENT <instr> <dst>
5695    
5696       Where <instr> is the absolute path name of the instrument to copy and
5697       <dst> is the directory where the instrument will be copied to.
5698    
5699       Possible Answers:
5700    
5701          "OK" -
5702    
5703             on success
5704    
5705          "ERR:<error-code>:<error-message>" -
5706    
5707    
5708    
5709    
5710    
5711    Schoenebeck              Expires October 3, 2008              [Page 102]
5712    
5713    Internet-Draft        LinuxSampler Control Protocol           April 2008
5714    
5715    
5716             in case the given instrument does not exists, or if an
5717             instrument with name equal to the name of the specified
5718             instrument already exists in the destination directory.
5719    
5720       Example:
5721    
5722          C: "COPY DB_INSTRUMENT '/Piano Collection/Bosendorfer 290'
5723          '/Acoustic/Pianos/'"
5724    
5725          S: "OK"
5726    
5727    6.8.19.  Changing the description of instrument
5728    
5729       The front-end can alter the description of a specific instrument by
5730       sending the following command:
5731    
5732          SET DB_INSTRUMENT DESCRIPTION <instr> <desc>
5733    
5734       Where <instr> is the absolute path name of the instrument and <desc>
5735       is the new description for the instrument (encapsulated into
5736       apostrophes, supporting escape sequences as described in chapter
5737       "Character Set and Escape Sequences (Section 7.1)").
5738    
5739       Possible Answers:
5740    
5741          "OK" -
5742    
5743             on success
5744    
5745          "ERR:<error-code>:<error-message>" -
5746    
5747             in case the given instrument does not exists.
5748    
5749       Example:
5750    
5751          C: "SET DB_INSTRUMENT DESCRIPTION '/Piano Collection/Acoustic/
5752          Bosendorfer 290' 'No comment :)'"
5753    
5754          S: "OK"
5755    
5756    6.8.20.  Finding instruments
5757    
5758       The front-end can search for instruments in specific directory by
5759       sending the following command:
5760    
5761          FIND DB_INSTRUMENTS [NON_RECURSIVE] <dir> <criteria-list>
5762    
5763       Where <dir> should be replaced by the absolute path name of the
5764    
5765    
5766    
5767    Schoenebeck              Expires October 3, 2008              [Page 103]
5768    
5769    Internet-Draft        LinuxSampler Control Protocol           April 2008
5770    
5771    
5772       directory to search in.  If NON_RECURSIVE is specified, the
5773       directories located in subdirectories of the specified directory will
5774       not be searched. <criteria-list> is a list of search criterias in
5775       form of "key1=val1 key2=val2 ...".  The following criterias are
5776       allowed:
5777    
5778       NAME='<search-string>'
5779    
5780          Restricts the search to instruments, which names satisfy the
5781          supplied search string (encapsulated into apostrophes, supporting
5782          escape sequences as described in chapter "Character Set and Escape
5783          Sequences (Section 7.1)").
5784    
5785       SIZE=[<min>]..[<max>]
5786    
5787          Restricts the search to instruments, which size is in the
5788          specified range.  If <min> is omitted, the search results are
5789          restricted to instruments with size less then or equal to <max>.
5790          If <max> is omitted, the search is restricted to instruments with
5791          size greater then or equal to <min>.
5792    
5793       CREATED='[<date-after>]..[<date-before>]'
5794    
5795          Restricts the search to instruments, which creation date satisfies
5796          the specified period, where <date-after> and <date-before> are in
5797          "YYYY-MM-DD HH:MM:SS" format.  If <date-after> is omitted the
5798          search is restricted to instruments created before <date-before>.
5799          If <date-before> is omitted, the search is restricted to
5800          instruments created after <date-after>.
5801    
5802       MODIFIED='[<date-after>]..[<date-before>]'
5803    
5804          Restricts the search to instruments, which date of last
5805          modification satisfies the specified period, where <date-after>
5806          and <date-before> are in "YYYY-MM-DD HH:MM:SS" format.  If <date-
5807          after> is omitted the search is restricted to instruments, which
5808          are last modified before <date-before>.  If <date-before> is
5809          omitted, the search is restricted to instruments, which are last
5810          modified after <date-after>.
5811    
5812       DESCRIPTION='<search-string>'
5813    
5814          Restricts the search to instruments with description that
5815          satisfies the supplied search string (encapsulated into
5816          apostrophes, supporting escape sequences as described in chapter
5817          "Character Set and Escape Sequences (Section 7.1)").
5818    
5819       PRODUCT='<search-string>'
5820    
5821    
5822    
5823    Schoenebeck              Expires October 3, 2008              [Page 104]
5824    
5825    Internet-Draft        LinuxSampler Control Protocol           April 2008
5826    
5827    
5828          Restricts the search to instruments with product info that
5829          satisfies the supplied search string (encapsulated into
5830          apostrophes, supporting escape sequences as described in chapter
5831          "Character Set and Escape Sequences (Section 7.1)").
5832    
5833       ARTISTS='<search-string>'
5834    
5835          Restricts the search to instruments with artists info that
5836          satisfies the supplied search string (encapsulated into
5837          apostrophes, supporting escape sequences as described in chapter
5838          "Character Set and Escape Sequences (Section 7.1)").
5839    
5840       KEYWORDS='<search-string>'
5841    
5842          Restricts the search to instruments with keyword list that
5843          satisfies the supplied search string (encapsulated into
5844          apostrophes, supporting escape sequences as described in chapter
5845          "Character Set and Escape Sequences (Section 7.1)").
5846    
5847       IS_DRUM=true | false
5848    
5849          Either true or false.  Restricts the search to drum kits or
5850          chromatic instruments.
5851    
5852       FORMAT_FAMILIES='<format-list>'
5853    
5854          Restricts the search to instruments of the supplied format
5855          families, where <format-list> is a comma separated list of format
5856          families.
5857    
5858       Where <search-string> is either a regular expression, or a word list
5859       separated with spaces for OR search and with '+' for AND search.
5860    
5861       Possible Answers:
5862    
5863          A comma separated list with the absolute path names (encapsulated
5864          into apostrophes) of all instruments in the specified directory
5865          that satisfy the supplied search criterias.
5866    
5867          "ERR:<error-code>:<error-message>" -
5868    
5869             if the given directory does not exist.
5870    
5871       Example:
5872    
5873          C: "FIND DB_INSTRUMENTS '/Piano Collection' NAME='bosendorfer+
5874          290'"
5875    
5876    
5877    
5878    
5879    Schoenebeck              Expires October 3, 2008              [Page 105]
5880    
5881    Internet-Draft        LinuxSampler Control Protocol           April 2008
5882    
5883    
5884          S: "'/Piano Collection/Bosendorfer 290'"
5885    
5886          C: "FIND DB_INSTRUMENTS '/Piano Collection' CREATED='2007-04-01
5887          09:30:13..'"
5888    
5889          S: "'/Piano Collection/Bosendorfer 290','/Piano Collection/
5890          Steinway D'"
5891    
5892    6.8.21.  Getting job status information
5893    
5894       The front-end can ask for the current status of a particular database
5895       instruments job by sending the following command:
5896    
5897          GET DB_INSTRUMENTS_JOB INFO <job-id>
5898    
5899       Where <job-id> should be replaced by the numerical ID of the job the
5900       front-end is interested in.
5901    
5902       Possible Answers:
5903    
5904          LinuxSampler will answer by sending a <CRLF> separated list.  Each
5905          answer line begins with the settings category name followed by a
5906          colon and then a space character <SP> and finally the info
5907          character string to that setting category.  At the moment the
5908          following categories are defined:
5909    
5910    
5911    
5912             FILES_TOTAL -
5913    
5914                The total number of files scheduled for scanning
5915    
5916             FILES_SCANNED -
5917    
5918                The current number of scanned files
5919    
5920             SCANNING -
5921    
5922                The absolute path name of the file which is currently being
5923                scanned
5924    
5925             STATUS -
5926    
5927                An integer value between 0 and 100 indicating the scanning
5928                progress percentage of the file which is currently being
5929                scanned
5930    
5931       The mentioned fields above don't have to be in particular order.
5932    
5933    
5934    
5935    Schoenebeck              Expires October 3, 2008              [Page 106]
5936    
5937    Internet-Draft        LinuxSampler Control Protocol           April 2008
5938    
5939    
5940       Example:
5941    
5942          C: "GET DB_INSTRUMENTS_JOB INFO 2"
5943    
5944          S: "FILES_TOTAL: 12"
5945    
5946             "FILES_SCANNED: 7"
5947    
5948             "SCANNING: /home/me/gigs/Bosendorfer 290.gig"
5949    
5950             "STATUS: 42"
5951    
5952             "."
5953    
5954    6.8.22.  Formatting the instruments database
5955    
5956       The front-end can remove all instruments and directories and re-
5957       create the instruments database structure (e.g., in case of a
5958       database corruption) by sending the following command:
5959    
5960          FORMAT INSTRUMENTS_DB
5961    
5962       Possible Answers:
5963    
5964          "OK" -
5965    
5966             on success
5967    
5968          "ERR:<error-code>:<error-message>" -
5969    
5970             If the formatting of the instruments database failed.
5971    
5972    6.8.23.  Checking for lost instrument files
5973    
5974       The front-end can retrieve the list of all instrument files in the
5975       instruments database that don't exist in the filesystem by sending
5976       the following command:
5977    
5978          FIND LOST DB_INSTRUMENT_FILES
5979    
5980       Possible Answers:
5981    
5982          A comma separated list with the absolute path names (encapsulated
5983          into apostrophes) of all lost instrument files.
5984    
5985          "ERR:<error-code>:<error-message>" -
5986    
5987    
5988    
5989    
5990    
5991    Schoenebeck              Expires October 3, 2008              [Page 107]
5992    
5993    Internet-Draft        LinuxSampler Control Protocol           April 2008
5994    
5995    
5996             in case it failed, providing an appropriate error code and
5997             error message.
5998    
5999       Example:
6000    
6001          C: "FIND LOST DB_INSTRUMENT_FILES"
6002    
6003          S: "'/gigs/Bosendorfer 290.gig','/gigs/Steinway D.gig','/gigs/Free
6004          Piano.gig'"
6005    
6006    6.8.24.  Replacing an instrument file
6007    
6008       The front-end can substitute all occurrences of an instrument file in
6009       the instruments database with a new one by sending the following
6010       command:
6011    
6012          SET DB_INSTRUMENT FILE_PATH <old_path> <new_path>
6013    
6014       Where <old_path> is the absolute path name of the instrument file to
6015       substitute with <new_path>.
6016    
6017       Possible Answers:
6018    
6019          "OK" -
6020    
6021             on success
6022    
6023          "ERR:<error-code>:<error-message>" -
6024    
6025             in case it failed, providing an appropriate error code and
6026             error message.
6027    
6028       Example:
6029    
6030          C: "SET DB_INSTRUMENT FILE_PATH '/gigs/Bosendorfer 290.gig'
6031          '/gigs/pianos/Bosendorfer 290.gig'"
6032    
6033          S: "OK"
6034    
6035    6.9.  Editing Instruments
6036    
6037       The sampler allows to edit instruments while playing with the sampler
6038       by spawning an external (3rd party) instrument editor application for
6039       a given instrument.  The 3rd party instrument editor applications
6040       have to place a respective plugin DLL file into the sampler's plugins
6041       directory.  The sampler will automatically try to load all plugin
6042       DLLs in that directory on startup and only on startup!
6043    
6044    
6045    
6046    
6047    Schoenebeck              Expires October 3, 2008              [Page 108]
6048    
6049    Internet-Draft        LinuxSampler Control Protocol           April 2008
6050    
6051    
6052       At the moment there is only one command for this feature set, but
6053       this will most probably change in future.
6054    
6055    6.9.1.  Opening an appropriate instrument editor application
6056    
6057       The front-end can request to open an appropriate instrument editor
6058       application by sending the following command:
6059    
6060          EDIT CHANNEL INSTRUMENT <sampler-channel>
6061    
6062       Where <sampler-channel> should be replaced by the number of the
6063       sampler channel as given by the "ADD CHANNEL" (Section 6.4.5) or
6064       "LIST CHANNELS" (Section 6.4.4) command.
6065    
6066       The sampler will try to ask all registered instrument editors (or to
6067       be more specific: their sampler plugins) whether they are capable to
6068       handle the instrument on the given sampler channel.  The sampler will
6069       simply use the first instrument editor application which replied with
6070       a positive answer and spawn that instrument editor application within
6071       the sampler's process and provide that application access to the
6072       instrument's data structures, so both applications can share and
6073       access the same instruments data at the same time, thus allowing to
6074       immediately hear changes with the sampler made by the instrument
6075       editor.
6076    
6077       Note: consequently instrument editors are always spawned locally on
6078       the same machine where the sampler is running on!
6079    
6080       Possible Answers:
6081    
6082          "OK" -
6083    
6084             when an appropriate instrument editor was launched
6085    
6086          "WRN:<warning-code>:<warning-message>" -
6087    
6088             when an appropriate instrument editor was launched, but there
6089             are noteworthy issues
6090    
6091          "ERR:<error-code>:<error-message>" -
6092    
6093             when an appropriate instrument editor could not be launched
6094    
6095       Examples:
6096    
6097          C: "EDIT CHANNEL INSTRUMENT 0"
6098    
6099    
6100    
6101    
6102    
6103  Schoenebeck               Expires July 2, 2007                 [Page 82]  Schoenebeck              Expires October 3, 2008              [Page 109]
6104    
6105  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
6106    
6107    
6108          S: "OK"
6109    
6110    6.10.  Managing Files
6111    
6112       You can query detailed informations about files located at the same
6113       system where the sampler instance is running on.  Using this command
6114       set allows to retrieve file informations even remotely from another
6115       machine.
6116    
6117    6.10.1.  Retrieving amount of instruments of a file
6118    
6119       The front-end can retrieve the amount of instruments within a given
6120       instrument file by sending the following command:
6121    
6122          GET FILE INSTRUMENTS <filename>
6123    
6124       Where <filename> is the name of the instrument file (encapsulated
6125       into apostrophes, supporting escape sequences as described in chapter
6126       "Character Set and Escape Sequences (Section 7.1)").
6127    
6128       The sampler will try to ask all sampler engines, whether they support
6129       the given file and ask the first engine with a positive answer for
6130       the amount of instruments.
6131    
6132       Possible Answers:
6133    
6134          On success, the sampler will answer by returning the amount of
6135          instruments.
6136    
6137          "ERR:<error-code>:<error-message>" -
6138    
6139             if the file could not be handled
6140    
6141       Examples:
6142    
6143          C: "GET FILE INSTRUMENTS 'D:/Sounds/Foo.gig'"
6144    
6145          S: "10"
6146    
6147    6.10.2.  Retrieving all instruments of a file
6148    
6149       The front-end can retrieve a list of all instruments within a given
6150       instrument file by sending the following command:
6151    
6152          LIST FILE INSTRUMENTS <filename>
6153    
6154       Where <filename> is the name of the instrument file (encapsulated
6155       into apostrophes, supporting escape sequences as described in chapter
6156    
6157    
6158    
6159    Schoenebeck              Expires October 3, 2008              [Page 110]
6160    
6161    Internet-Draft        LinuxSampler Control Protocol           April 2008
6162    
6163    
6164       "Character Set and Escape Sequences (Section 7.1)").
6165    
6166       The sampler will try to ask all sampler engines, whether they support
6167       the given file and ask the first engine with a positive answer for a
6168       list of IDs for the instruments in the given file.
6169    
6170       Possible Answers:
6171    
6172          On success, the sampler will answer by returning a comma separated
6173          list of instrument IDs.
6174    
6175          "ERR:<error-code>:<error-message>" -
6176    
6177             if the file could not be handled
6178    
6179       Examples:
6180    
6181          C: "LIST FILE INSTRUMENTS 'D:/Sounds/Foo.gig'"
6182    
6183          S: "0,1,2,3,4,5,6,7,8,9"
6184    
6185    6.10.3.  Retrieving informations about one instrument in a file
6186    
6187       The front-end can retrieve detailed informations about a specific
6188       instrument within a given instrument file by sending the following
6189       command:
6190    
6191          GET FILE INSTRUMENT INFO <filename> <instr-id>
6192    
6193       Where <filename> is the name of the instrument file (encapsulated
6194       into apostrophes, supporting escape sequences as described in chapter
6195       "Character Set and Escape Sequences (Section 7.1)") and <instr-id> is
6196       the numeric instrument ID as returned by the "LIST FILE INSTRUMENTS"
6197       (Section 6.10.2) command.
6198    
6199       The sampler will try to ask all sampler engines, whether they support
6200       the given file and ask the first engine with a positive answer for
6201       informations about the specific instrument in the given file.
6202    
6203       Possible Answers:
6204    
6205          LinuxSampler will answer by sending a <CRLF> separated list.  Each
6206          answer line begins with the settings category name followed by a
6207          colon and then a space character <SP> and finally the info
6208          character string to that setting category.  At the moment the
6209          following categories are defined:
6210    
6211    
6212    
6213    
6214    
6215    Schoenebeck              Expires October 3, 2008              [Page 111]
6216    
6217    Internet-Draft        LinuxSampler Control Protocol           April 2008
6218    
6219    
6220    
6221    
6222             NAME -
6223    
6224                name of the instrument as stored in the instrument file
6225    
6226             FORMAT_FAMILY -
6227    
6228                name of the sampler format of the given instrument
6229    
6230             FORMAT_VERSION -
6231    
6232                version of the sampler format the instrumen is stored as
6233    
6234             PRODUCT -
6235    
6236                official product name of the instrument as stored in the
6237                file
6238    
6239             ARTISTS -
6240    
6241                artists / sample library vendor of the instrument
6242    
6243       The mentioned fields above don't have to be in particular order.
6244    
6245       Example:
6246    
6247          C: "GET FILE INSTRUMENT INFO 'D:/Sounds/Foo.gig' 0"
6248    
6249          S: "NAME: Lunatic Loops"
6250    
6251             "FORMAT_FAMILY: GIG"
6252    
6253             "FORMAT_VERSION: 3"
6254    
6255             "PRODUCT: The Backbone Bongo Beats"
6256    
6257             "ARTISTS: Jimmy the Fish"
6258    
6259             "."
6260    
6261    
6262    
6263    
6264    
6265    
6266    
6267    
6268    
6269    
6270    
6271    Schoenebeck              Expires October 3, 2008              [Page 112]
6272    
6273    Internet-Draft        LinuxSampler Control Protocol           April 2008
6274    
6275    
6276  7.  Command Syntax  7.  Command Syntax
# Line 4644  Internet-Draft        LinuxSampler Contr Line 6324  Internet-Draft        LinuxSampler Contr
6324    
6325    
6326    
6327  Schoenebeck               Expires July 2, 2007                 [Page 83]  Schoenebeck              Expires October 3, 2008              [Page 113]
6328    
6329  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
6330    
6331    
6332        / LIST SP list_instruction        / LIST SP list_instruction
# Line 4661  Internet-Draft        LinuxSampler Contr Line 6341  Internet-Draft        LinuxSampler Contr
6341    
6342        / UNSUBSCRIBE SP unsubscribe_event        / UNSUBSCRIBE SP unsubscribe_event
6343    
       / SELECT SP text  
   
6344        / RESET SP reset_instruction        / RESET SP reset_instruction
6345    
6346        / CLEAR SP clear_instruction        / CLEAR SP clear_instruction
6347    
6348          / FIND SP find_instruction
6349    
6350          / MOVE SP move_instruction
6351    
6352          / COPY SP copy_instruction
6353    
6354          / EDIT SP edit_instruction
6355    
6356          / FORMAT SP format_instruction
6357    
6358        / RESET        / RESET
6359    
6360        / QUIT        / QUIT
# Line 4675  Internet-Draft        LinuxSampler Contr Line 6363  Internet-Draft        LinuxSampler Contr
6363    
6364        CHANNEL        CHANNEL
6365    
6366          / DB_INSTRUMENT_DIRECTORY SP db_path
6367    
6368          / DB_INSTRUMENTS SP NON_MODAL SP scan_mode SP db_path SP filename
6369    
6370          / DB_INSTRUMENTS SP scan_mode SP db_path SP filename
6371    
6372          / DB_INSTRUMENTS SP NON_MODAL SP db_path SP filename
6373    
6374          / DB_INSTRUMENTS SP NON_MODAL SP db_path SP filename SP
6375          instrument_index
6376    
6377          / DB_INSTRUMENTS SP db_path SP filename
6378    
6379    
6380    
6381    
6382    
6383    Schoenebeck              Expires October 3, 2008              [Page 114]
6384    
6385    Internet-Draft        LinuxSampler Control Protocol           April 2008
6386    
6387    
6388          / DB_INSTRUMENTS SP db_path SP filename SP instrument_index
6389    
6390        / MIDI_INSTRUMENT_MAP        / MIDI_INSTRUMENT_MAP
6391    
6392        / MIDI_INSTRUMENT_MAP SP map_name        / MIDI_INSTRUMENT_MAP SP map_name
# Line 4691  Internet-Draft        LinuxSampler Contr Line 6403  Internet-Draft        LinuxSampler Contr
6403    
6404        / CHANNEL_COUNT        / CHANNEL_COUNT
6405    
6406          / CHANNEL_MIDI
6407    
6408          / DEVICE_MIDI
6409    
6410        / VOICE_COUNT        / VOICE_COUNT
6411    
6412        / STREAM_COUNT        / STREAM_COUNT
6413    
6414        / BUFFER_FILL        / BUFFER_FILL
6415    
6416          / CHANNEL_INFO
6417    
6418          / FX_SEND_COUNT
6419    
6420          / FX_SEND_INFO
 Schoenebeck               Expires July 2, 2007                 [Page 84]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
       / CHANNEL_INFO  
6421    
6422        / MIDI_INSTRUMENT_MAP_COUNT        / MIDI_INSTRUMENT_MAP_COUNT
6423    
# Line 4715  Internet-Draft        LinuxSampler Contr Line 6427  Internet-Draft        LinuxSampler Contr
6427    
6428        / MIDI_INSTRUMENT_INFO        / MIDI_INSTRUMENT_INFO
6429    
6430          / DB_INSTRUMENT_DIRECTORY_COUNT
6431    
6432          / DB_INSTRUMENT_DIRECTORY_INFO
6433    
6434          / DB_INSTRUMENT_COUNT
6435    
6436    
6437    
6438    
6439    Schoenebeck              Expires October 3, 2008              [Page 115]
6440    
6441    Internet-Draft        LinuxSampler Control Protocol           April 2008
6442    
6443    
6444          / DB_INSTRUMENT_INFO
6445    
6446          / DB_INSTRUMENTS_JOB_INFO
6447    
6448        / MISCELLANEOUS        / MISCELLANEOUS
6449    
6450          / TOTAL_STREAM_COUNT
6451    
6452        / TOTAL_VOICE_COUNT        / TOTAL_VOICE_COUNT
6453    
6454          / GLOBAL_INFO
6455    
6456     unsubscribe_event =     unsubscribe_event =
6457    
6458        AUDIO_OUTPUT_DEVICE_COUNT        AUDIO_OUTPUT_DEVICE_COUNT
# Line 4731  Internet-Draft        LinuxSampler Contr Line 6465  Internet-Draft        LinuxSampler Contr
6465    
6466        / CHANNEL_COUNT        / CHANNEL_COUNT
6467    
6468          / CHANNEL_MIDI
6469    
6470          / DEVICE_MIDI
6471    
6472        / VOICE_COUNT        / VOICE_COUNT
6473    
6474        / STREAM_COUNT        / STREAM_COUNT
# Line 4739  Internet-Draft        LinuxSampler Contr Line 6477  Internet-Draft        LinuxSampler Contr
6477    
6478        / CHANNEL_INFO        / CHANNEL_INFO
6479    
6480          / FX_SEND_COUNT
6481    
6482          / FX_SEND_INFO
6483    
6484        / MIDI_INSTRUMENT_MAP_COUNT        / MIDI_INSTRUMENT_MAP_COUNT
6485    
6486        / MIDI_INSTRUMENT_MAP_INFO        / MIDI_INSTRUMENT_MAP_INFO
# Line 4747  Internet-Draft        LinuxSampler Contr Line 6489  Internet-Draft        LinuxSampler Contr
6489    
6490        / MIDI_INSTRUMENT_INFO        / MIDI_INSTRUMENT_INFO
6491    
       / MISCELLANEOUS  
6492    
       / TOTAL_VOICE_COUNT  
6493    
6494     map_instruction =  
6495    Schoenebeck              Expires October 3, 2008              [Page 116]
6496    
6497    Internet-Draft        LinuxSampler Control Protocol           April 2008
6498    
6499    
6500          / DB_INSTRUMENT_DIRECTORY_COUNT
6501    
6502          / DB_INSTRUMENT_DIRECTORY_INFO
6503    
6504  Schoenebeck               Expires July 2, 2007                 [Page 85]        / DB_INSTRUMENT_COUNT
6505    
6506  Internet-Draft        LinuxSampler Control Protocol        December 2006        / DB_INSTRUMENT_INFO
6507    
6508          / DB_INSTRUMENTS_JOB_INFO
6509    
6510          / MISCELLANEOUS
6511    
6512          / TOTAL_STREAM_COUNT
6513    
6514          / TOTAL_VOICE_COUNT
6515    
6516          / GLOBAL_INFO
6517    
6518       map_instruction =
6519    
6520        MIDI_INSTRUMENT SP midi_map SP midi_bank SP midi_prog SP        MIDI_INSTRUMENT SP modal_arg midi_map SP midi_bank SP midi_prog SP
6521        engine_name SP filename SP instrument_index SP volume_value        engine_name SP filename SP instrument_index SP volume_value
6522    
6523        / MIDI_INSTRUMENT SP midi_map SP midi_bank SP midi_prog SP        / MIDI_INSTRUMENT SP modal_arg midi_map SP midi_bank SP midi_prog
6524        engine_name SP filename SP instrument_index SP volume_value SP        SP engine_name SP filename SP instrument_index SP volume_value SP
6525        instr_load_mode        instr_load_mode
6526    
6527        / MIDI_INSTRUMENT SP midi_map SP midi_bank SP midi_prog SP        / MIDI_INSTRUMENT SP modal_arg midi_map SP midi_bank SP midi_prog
6528        engine_name SP filename SP instrument_index SP volume_value SP        SP engine_name SP filename SP instrument_index SP volume_value SP
6529        entry_name        entry_name
6530    
6531        / MIDI_INSTRUMENT SP midi_map SP midi_bank SP midi_prog SP        / MIDI_INSTRUMENT SP modal_arg midi_map SP midi_bank SP midi_prog
6532        engine_name SP filename SP instrument_index SP volume_value SP        SP engine_name SP filename SP instrument_index SP volume_value SP
6533        instr_load_mode SP entry_name        instr_load_mode SP entry_name
6534    
6535     unmap_instruction =     unmap_instruction =
# Line 4788  Internet-Draft        LinuxSampler Contr Line 6544  Internet-Draft        LinuxSampler Contr
6544    
6545        / MIDI_INSTRUMENT_MAP SP ALL        / MIDI_INSTRUMENT_MAP SP ALL
6546    
6547    
6548    
6549    
6550    
6551    Schoenebeck              Expires October 3, 2008              [Page 117]
6552    
6553    Internet-Draft        LinuxSampler Control Protocol           April 2008
6554    
6555    
6556          / DB_INSTRUMENT_DIRECTORY SP FORCE SP db_path
6557    
6558          / DB_INSTRUMENT_DIRECTORY SP db_path
6559    
6560          / DB_INSTRUMENT SP db_path
6561    
6562     get_instruction =     get_instruction =
6563    
6564        AVAILABLE_ENGINES        AVAILABLE_ENGINES
# Line 4810  Internet-Draft        LinuxSampler Contr Line 6581  Internet-Draft        LinuxSampler Contr
6581        / AUDIO_OUTPUT_DRIVER_PARAMETER SP INFO SP string SP string SP        / AUDIO_OUTPUT_DRIVER_PARAMETER SP INFO SP string SP string SP
6582        key_val_list        key_val_list
6583    
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 86]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
6584        / AUDIO_OUTPUT_DEVICES        / AUDIO_OUTPUT_DEVICES
6585    
6586        / MIDI_INPUT_DEVICES        / MIDI_INPUT_DEVICES
# Line 4836  Internet-Draft        LinuxSampler Contr Line 6600  Internet-Draft        LinuxSampler Contr
6600    
6601        / CHANNELS        / CHANNELS
6602    
6603    
6604    
6605    
6606    
6607    Schoenebeck              Expires October 3, 2008              [Page 118]
6608    
6609    Internet-Draft        LinuxSampler Control Protocol           April 2008
6610    
6611    
6612        / CHANNEL SP INFO SP sampler_channel        / CHANNEL SP INFO SP sampler_channel
6613    
6614        / CHANNEL SP BUFFER_FILL SP buffer_size_type SP sampler_channel        / CHANNEL SP BUFFER_FILL SP buffer_size_type SP sampler_channel
# Line 4848  Internet-Draft        LinuxSampler Contr Line 6621  Internet-Draft        LinuxSampler Contr
6621    
6622        / SERVER SP INFO        / SERVER SP INFO
6623    
6624          / TOTAL_STREAM_COUNT
6625    
6626        / TOTAL_VOICE_COUNT        / TOTAL_VOICE_COUNT
6627    
6628        / TOTAL_VOICE_COUNT_MAX        / TOTAL_VOICE_COUNT_MAX
# Line 4864  Internet-Draft        LinuxSampler Contr Line 6639  Internet-Draft        LinuxSampler Contr
6639    
6640        / FX_SENDS SP sampler_channel        / FX_SENDS SP sampler_channel
6641    
6642          / FX_SEND SP INFO SP sampler_channel SP fx_send_id
6643    
6644          / DB_INSTRUMENT_DIRECTORIES SP RECURSIVE SP db_path
6645    
6646          / DB_INSTRUMENT_DIRECTORIES SP db_path
6647    
6648          / DB_INSTRUMENT_DIRECTORY SP INFO SP db_path
6649    
6650          / DB_INSTRUMENTS SP RECURSIVE SP db_path
6651    
6652  Schoenebeck               Expires July 2, 2007                 [Page 87]        / DB_INSTRUMENTS SP db_path
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
6653    
6654          / DB_INSTRUMENT SP INFO SP db_path
6655    
6656        / FX_SEND SP INFO SP sampler_channel SP fx_send_id        / DB_INSTRUMENTS_JOB SP INFO SP number
6657    
6658        / VOLUME        / VOLUME
6659    
6660    
6661    
6662    
6663    Schoenebeck              Expires October 3, 2008              [Page 119]
6664    
6665    Internet-Draft        LinuxSampler Control Protocol           April 2008
6666    
6667    
6668          / FILE SP INSTRUMENTS SP filename
6669    
6670          / FILE SP INSTRUMENT SP INFO SP filename SP instrument_index
6671    
6672     set_instruction =     set_instruction =
6673    
6674        AUDIO_OUTPUT_DEVICE_PARAMETER SP number SP string '='        AUDIO_OUTPUT_DEVICE_PARAMETER SP number SP string '='
# Line 4888  Internet-Draft        LinuxSampler Contr Line 6680  Internet-Draft        LinuxSampler Contr
6680        / MIDI_INPUT_DEVICE_PARAMETER SP number SP string '='        / MIDI_INPUT_DEVICE_PARAMETER SP number SP string '='
6681        param_val_list        param_val_list
6682    
6683          / MIDI_INPUT_PORT_PARAMETER SP number SP number SP string '=' NONE
6684    
6685        / MIDI_INPUT_PORT_PARAMETER SP number SP number SP string '='        / MIDI_INPUT_PORT_PARAMETER SP number SP number SP string '='
6686        param_val_list        param_val_list
6687    
# Line 4895  Internet-Draft        LinuxSampler Contr Line 6689  Internet-Draft        LinuxSampler Contr
6689    
6690        / MIDI_INSTRUMENT_MAP SP NAME SP midi_map SP map_name        / MIDI_INSTRUMENT_MAP SP NAME SP midi_map SP map_name
6691    
6692          / FX_SEND SP NAME SP sampler_channel SP fx_send_id SP fx_send_name
6693    
6694        / FX_SEND SP AUDIO_OUTPUT_CHANNEL SP sampler_channel SP fx_send_id        / FX_SEND SP AUDIO_OUTPUT_CHANNEL SP sampler_channel SP fx_send_id
6695        SP audio_channel_index SP audio_channel_index        SP audio_channel_index SP audio_channel_index
6696    
6697          / FX_SEND SP MIDI_CONTROLLER SP sampler_channel SP fx_send_id SP
6698          midi_ctrl
6699    
6700          / FX_SEND SP LEVEL SP sampler_channel SP fx_send_id SP
6701          volume_value
6702    
6703          / DB_INSTRUMENT_DIRECTORY SP NAME SP db_path SP stringval_escaped
6704    
6705          / DB_INSTRUMENT_DIRECTORY SP DESCRIPTION SP db_path SP
6706          stringval_escaped
6707    
6708          / DB_INSTRUMENT SP NAME SP db_path SP stringval_escaped
6709    
6710          / DB_INSTRUMENT SP DESCRIPTION SP db_path SP stringval_escaped
6711    
6712          / DB_INSTRUMENT SP FILE_PATH SP filename SP filename
6713    
6714        / ECHO SP boolean        / ECHO SP boolean
6715    
6716    
6717    
6718    
6719    Schoenebeck              Expires October 3, 2008              [Page 120]
6720    
6721    Internet-Draft        LinuxSampler Control Protocol           April 2008
6722    
6723    
6724        / VOLUME SP volume_value        / VOLUME SP volume_value
6725    
6726     create_instruction =     create_instruction =
# Line 4922  Internet-Draft        LinuxSampler Contr Line 6743  Internet-Draft        LinuxSampler Contr
6743    
6744     clear_instruction =     clear_instruction =
6745    
6746          MIDI_INSTRUMENTS SP midi_map
6747    
6748          / MIDI_INSTRUMENTS SP ALL
6749    
6750       find_instruction =
6751    
6752          DB_INSTRUMENTS SP NON_RECURSIVE SP db_path SP query_val_list
6753    
6754          / DB_INSTRUMENTS SP db_path SP query_val_list
6755    
6756          / DB_INSTRUMENT_DIRECTORIES SP NON_RECURSIVE SP db_path SP
6757          query_val_list
6758    
6759          / DB_INSTRUMENT_DIRECTORIES SP db_path SP query_val_list
6760    
6761          / LOST SP DB_INSTRUMENT_FILES
6762    
6763       move_instruction =
6764    
6765  Schoenebeck               Expires July 2, 2007                 [Page 88]        DB_INSTRUMENT_DIRECTORY SP db_path SP db_path
6766    
6767          / DB_INSTRUMENT SP db_path SP db_path
6768    
6769       copy_instruction =
6770    
6771    
6772    
6773    
6774    
6775    Schoenebeck              Expires October 3, 2008              [Page 121]
6776    
6777  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
6778    
6779    
6780        MIDI_INSTRUMENTS SP midi_map        DB_INSTRUMENT_DIRECTORY SP db_path SP db_path
6781    
6782        / MIDI_INSTRUMENTS SP ALL        / DB_INSTRUMENT SP db_path SP db_path
6783    
6784     destroy_instruction =     destroy_instruction =
6785    
# Line 4980  Internet-Draft        LinuxSampler Contr Line 6828  Internet-Draft        LinuxSampler Contr
6828    
6829    
6830    
6831  Schoenebeck               Expires July 2, 2007                 [Page 89]  Schoenebeck              Expires October 3, 2008              [Page 122]
6832    
6833  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
6834    
6835    
6836        / MIDI_INSTRUMENT_MAP SP sampler_channel SP NONE        / MIDI_INSTRUMENT_MAP SP sampler_channel SP NONE
6837    
6838        / MIDI_INSTRUMENT_MAP SP sampler_channel SP DEFAULT        / MIDI_INSTRUMENT_MAP SP sampler_channel SP DEFAULT
6839    
6840       edit_instruction =
6841    
6842          CHANNEL SP INSTRUMENT SP sampler_channel
6843    
6844       format_instruction =
6845    
6846          INSTRUMENTS_DB
6847    
6848       modal_arg =
6849    
6850          /* epsilon (empty argument) */
6851    
6852          / NON_MODAL SP
6853    
6854     key_val_list =     key_val_list =
6855    
6856        string '=' param_val_list        string '=' param_val_list
# Line 5019  Internet-Draft        LinuxSampler Contr Line 6881  Internet-Draft        LinuxSampler Contr
6881    
6882        / MIDI_INSTRUMENTS SP ALL        / MIDI_INSTRUMENTS SP ALL
6883    
6884    
6885    
6886    
6887    Schoenebeck              Expires October 3, 2008              [Page 123]
6888    
6889    Internet-Draft        LinuxSampler Control Protocol           April 2008
6890    
6891    
6892        / MIDI_INSTRUMENT_MAPS        / MIDI_INSTRUMENT_MAPS
6893    
6894        / FX_SENDS SP sampler_channel        / FX_SENDS SP sampler_channel
6895    
6896     load_instr_args =        / DB_INSTRUMENT_DIRECTORIES SP RECURSIVE SP db_path
6897    
6898        filename SP instrument_index SP sampler_channel        / DB_INSTRUMENT_DIRECTORIES SP db_path
6899    
6900        / NON_MODAL SP filename SP instrument_index SP sampler_channel        / DB_INSTRUMENTS SP RECURSIVE SP db_path
6901    
6902     load_engine_args =        / DB_INSTRUMENTS SP db_path
6903    
6904        engine_name SP sampler_channel        / FILE SP INSTRUMENTS SP filename
6905    
6906       load_instr_args =
6907    
6908          filename SP instrument_index SP sampler_channel
6909    
6910          / NON_MODAL SP filename SP instrument_index SP sampler_channel
6911    
6912  Schoenebeck               Expires July 2, 2007                 [Page 90]     load_engine_args =
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
6913    
6914          engine_name SP sampler_channel
6915    
6916     instr_load_mode =     instr_load_mode =
6917    
# Line 5065  Internet-Draft        LinuxSampler Contr Line 6937  Internet-Draft        LinuxSampler Contr
6937    
6938        number        number
6939    
6940    
6941    
6942    
6943    Schoenebeck              Expires October 3, 2008              [Page 124]
6944    
6945    Internet-Draft        LinuxSampler Control Protocol           April 2008
6946    
6947    
6948     midi_input_channel_index =     midi_input_channel_index =
6949    
6950        number        number
# Line 5089  Internet-Draft        LinuxSampler Contr Line 6969  Internet-Draft        LinuxSampler Contr
6969    
6970     midi_ctrl =     midi_ctrl =
6971    
   
   
   
 Schoenebeck               Expires July 2, 2007                 [Page 91]  
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
   
   
6972        number        number
6973    
6974     volume_value =     volume_value =
# Line 5121  Internet-Draft        LinuxSampler Contr Line 6993  Internet-Draft        LinuxSampler Contr
6993    
6994        string        string
6995    
6996    
6997    
6998    
6999    Schoenebeck              Expires October 3, 2008              [Page 125]
7000    
7001    Internet-Draft        LinuxSampler Control Protocol           April 2008
7002    
7003    
7004     filename =     filename =
7005    
7006        stringval        path
7007    
7008       db_path =
7009    
7010          path
7011    
7012     map_name =     map_name =
7013    
7014        stringval        stringval_escaped
7015    
7016     entry_name =     entry_name =
7017    
7018        stringval        stringval_escaped
7019    
7020     fx_send_name =     fx_send_name =
7021    
7022        stringval        stringval_escaped
7023    
7024     param_val_list =     param_val_list =
7025    
# Line 5145  Internet-Draft        LinuxSampler Contr Line 7029  Internet-Draft        LinuxSampler Contr
7029    
7030     param_val =     param_val =
7031    
7032          string
7033    
7034          / stringval
7035    
7036          / number
7037    
7038          / dotnum
7039    
7040       query_val_list =
7041    
7042          string '=' query_val
7043    
7044          / query_val_list SP string '=' query_val
7045    
7046       query_val =
7047    
7048          text_escaped
7049    
7050  Schoenebeck               Expires July 2, 2007                 [Page 92]        / stringval_escaped
7051    
7052    
7053    
7054    
7055    Schoenebeck              Expires October 3, 2008              [Page 126]
7056    
7057  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
7058    
7059    
7060        string     scan_mode =
7061    
7062        / stringval        RECURSIVE
7063    
7064        / number        / NON_RECURSIVE
7065    
7066        / dotnum        / FLAT
7067    
7068    7.1.  Character Set and Escape Sequences
7069    
7070       Older versions of this protocol up to and including v1.1 only
7071       supported the standard ASCII character set (ASCII code 0 - 127)
7072       [RFC20], all younger versions of this protocol however support the
7073       Extended ASCII character set (ASCII code 0 - 255).  The same group of
7074       younger protocols also support escape sequences, but only for
7075       certain, explicitly declared parts of the protocol.  The supported
7076       escape sequences are defined as follows:
7077    
7078       +------------------------+------------------------------------------+
7079       | ASCII Character        | Translated into (Name)                   |
7080       | Sequence               |                                          |
7081       +------------------------+------------------------------------------+
7082       | \n                     | new line                                 |
7083       |                        |                                          |
7084       | \r                     | carriage return                          |
7085       |                        |                                          |
7086       | \f                     | form feed                                |
7087       |                        |                                          |
7088       | \t                     | horizontal tab                           |
7089       |                        |                                          |
7090       | \v                     | vertical tab                             |
7091       |                        |                                          |
7092       | \'                     | apostrophe                               |
7093       |                        |                                          |
7094       | \"                     | quotation mark                           |
7095       |                        |                                          |
7096       | \\                     | backslash                                |
7097       |                        |                                          |
7098       | \OOO                   | three digit octal ASCII code of the      |
7099       |                        | character                                |
7100       |                        |                                          |
7101       | \xHH                   | two digit hex ASCII code of the          |
7102       |                        | character                                |
7103       +------------------------+------------------------------------------+
7104    
7105       Notice: due to the transition of certain parts of the protocol which
7106       now support escape sequences, a slight backward incompatibility to
7107       protocols version v1.1 and younger has been introduced.  The only
7108    
7109    
7110    
7111    Schoenebeck              Expires October 3, 2008              [Page 127]
7112    
7113    Internet-Draft        LinuxSampler Control Protocol           April 2008
7114    
7115    
7116       difference is that in parts of the protocol where escape characters
7117       are now supported, a backslash characters MUST be escaped as well
7118       (that is as double backslash), whereas in the old versions a single
7119       backslash was sufficient.
7120    
7121       The following LSCP commands support escape sequences as part of their
7122       filename / path based arguments and / or may contain a filename /
7123       path with escape sequences in their response:
7124    
7125          "LOAD INSTRUMENT" (Section 6.4.1)
7126    
7127          "GET CHANNEL INFO" (Section 6.4.10)
7128    
7129          "MAP MIDI_INSTRUMENT" (Section 6.7.7)
7130    
7131          "GET MIDI_INSTRUMENT INFO" (Section 6.7.11)
7132    
7133          "ADD DB_INSTRUMENT_DIRECTORY" (Section 6.8.1)
7134    
7135          "ADD DB_INSTRUMENTS" (Section 6.8.11)
7136    
7137          "REMOVE DB_INSTRUMENT_DIRECTORY" (Section 6.8.2)
7138    
7139          "REMOVE DB_INSTRUMENT" (Section 6.8.12)
7140    
7141          "GET DB_INSTRUMENT_DIRECTORIES" (Section 6.8.3)
7142    
7143          "LIST DB_INSTRUMENT_DIRECTORIES" (Section 6.8.4)
7144    
7145          "GET DB_INSTRUMENT_DIRECTORY INFO" (Section 6.8.5)
7146    
7147          "GET DB_INSTRUMENTS" (Section 6.8.13)
7148    
7149          "LIST DB_INSTRUMENTS" (Section 6.8.14)
7150    
7151          "GET DB_INSTRUMENT INFO" (Section 6.8.15)
7152    
7153          "SET DB_INSTRUMENT_DIRECTORY NAME" (Section 6.8.6)
7154    
7155          "SET DB_INSTRUMENT_DIRECTORY DESCRIPTION" (Section 6.8.9)
7156    
7157          "SET DB_INSTRUMENT NAME" (Section 6.8.16)
7158    
7159          "SET DB_INSTRUMENT DESCRIPTION" (Section 6.8.19)
7160    
7161          "FIND DB_INSTRUMENTS" (Section 6.8.20)
7162    
7163    
7164    
7165    
7166    
7167    Schoenebeck              Expires October 3, 2008              [Page 128]
7168    
7169    Internet-Draft        LinuxSampler Control Protocol           April 2008
7170    
7171    
7172          "FIND DB_INSTRUMENT_DIRECTORIES" (Section 6.8.10)
7173    
7174          "MOVE DB_INSTRUMENT" (Section 6.8.17)
7175    
7176          "MOVE DB_INSTRUMENT_DIRECTORY" (Section 6.8.7)
7177    
7178          "COPY DB_INSTRUMENT" (Section 6.8.18)
7179    
7180          "COPY DB_INSTRUMENT_DIRECTORY" (Section 6.8.8)
7181    
7182          "FIND LOST DB_INSTRUMENT_FILES" (Section 6.8.23)
7183    
7184          "SET DB_INSTRUMENT FILE_PATH" (Section 6.8.24)
7185    
7186          "GET FILE INSTRUMENTS" (Section 6.10.1)
7187    
7188          "LIST FILE INSTRUMENTS" (Section 6.10.2)
7189    
7190          "GET FILE INSTRUMENT INFO" (Section 6.10.3)
7191    
7192       Note that the forward slash character ('/') has a special meaning in
7193       filename / path based arguments: it acts as separator of the nodes in
7194       the path, thus if a directory- or filename includes a forward slash
7195       (not intended as path node separator), you MUST escape that slash
7196       either with the respective hex escape sequence ("\x2f") or with the
7197       respective octal escape sequence ("\057").
7198    
7199       Note for Windows: file path arguments in LSCP are expected to use
7200       forward slashes as directory node separator similar to Unix based
7201       operating systems.  In contrast to Unix however a Windows typical
7202       drive character is expected to be prefixed to the path.  That is an
7203       original Windows file path like "D:\Sounds\My.gig" would become in
7204       LSCP: "D:/Sounds/My.gig".
7205    
7206       The following LSCP commands even support escape sequences as part of
7207       at least one of their text-based arguments (i.e. entity name,
7208       description) and / or may contain escape sequences in at least one of
7209       their text-based fields in their response:
7210    
7211          "GET SERVER INFO" (Section 6.6.5)
7212    
7213          "GET ENGINE INFO" (Section 6.4.9)
7214    
7215          "GET CHANNEL INFO" (Section 6.4.10)
7216    
7217          "CREATE FX_SEND" (Section 6.4.25)
7218    
7219    
7220    
7221    
7222    
7223    Schoenebeck              Expires October 3, 2008              [Page 129]
7224    
7225    Internet-Draft        LinuxSampler Control Protocol           April 2008
7226    
7227    
7228          "GET FX_SEND INFO" (Section 6.4.29)
7229    
7230          "SET FX_SEND NAME" (Section 6.4.30)
7231    
7232          "GET MIDI_INSTRUMENT INFO" (Section 6.7.11)
7233    
7234          "GET MIDI_INSTRUMENT_MAP INFO" (Section 6.7.5)
7235    
7236          "ADD MIDI_INSTRUMENT_MAP" (Section 6.7.1)
7237    
7238          "MAP MIDI_INSTRUMENT" (Section 6.7.7)
7239    
7240          "SET MIDI_INSTRUMENT_MAP NAME" (Section 6.7.6)
7241    
7242          "GET DB_INSTRUMENT_DIRECTORY INFO" (Section 6.8.5)
7243    
7244          "SET DB_INSTRUMENT_DIRECTORY NAME" (Section 6.8.6)
7245    
7246          "SET DB_INSTRUMENT_DIRECTORY DESCRIPTION" (Section 6.8.9)
7247    
7248          "FIND DB_INSTRUMENT_DIRECTORIES" (Section 6.8.10)
7249    
7250          "GET DB_INSTRUMENT INFO" (Section 6.8.15)
7251    
7252          "SET DB_INSTRUMENT NAME" (Section 6.8.16)
7253    
7254          "SET DB_INSTRUMENT DESCRIPTION" (Section 6.8.19)
7255    
7256          "FIND DB_INSTRUMENTS" (Section 6.8.20)
7257    
7258       Please note that these lists are manually maintained.  If you find a
7259       command that also supports escape sequences we forgot to mention
7260       here, please report it!
7261    
7262    
7263    
# Line 5204  Internet-Draft        LinuxSampler Contr Line 7266  Internet-Draft        LinuxSampler Contr
7266    
7267    
7268    
7269  Schoenebeck               Expires July 2, 2007                 [Page 93]  
7270    
7271    
7272    
7273    
7274    
7275    
7276    
7277    
7278    
7279    Schoenebeck              Expires October 3, 2008              [Page 130]
7280    
7281  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
7282    
7283    
7284  8.  Events  8.  Events
# Line 5260  Internet-Draft        LinuxSampler Contr Line 7332  Internet-Draft        LinuxSampler Contr
7332    
7333    
7334    
7335  Schoenebeck               Expires July 2, 2007                 [Page 94]  Schoenebeck              Expires October 3, 2008              [Page 131]
7336    
7337  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
7338    
7339    
7340        "NOTIFY:MIDI_INPUT_DEVICE_COUNT:<devices>"        "NOTIFY:MIDI_INPUT_DEVICE_COUNT:<devices>"
# Line 5303  Internet-Draft        LinuxSampler Contr Line 7375  Internet-Draft        LinuxSampler Contr
7375     where <channels> will be replaced by the new number of sampler     where <channels> will be replaced by the new number of sampler
7376     channels.     channels.
7377    
7378  8.6.  Number of active voices changed  8.6.  MIDI data on a sampler channel arrived
7379    
7380     Client may want to be notified when the number of voices on the back-     Client may want to be notified when MIDI data arrive on sampler
7381     end changes by issuing the following command:     channels on back-end side, by issuing the following command:
7382    
7383        SUBSCRIBE VOICE_COUNT        SUBSCRIBE CHANNEL_MIDI
7384    
7385     Server will start sending the following notification messages:     Server will start sending one of the the following notification
7386       messages:
7387    
7388    
7389    
7390    
7391    Schoenebeck              Expires October 3, 2008              [Page 132]
7392    
7393    Internet-Draft        LinuxSampler Control Protocol           April 2008
7394    
7395    
7396          "NOTIFY:CHANNEL_MIDI:<channel-id> NOTE_ON <note> <velocity>"
7397    
7398          "NOTIFY:CHANNEL_MIDI:<channel-id> NOTE_OFF <note> <velocity>"
7399    
7400       where <channel-id> will be replaced by the ID of the sampler channel
7401       where the MIDI data arrived. <note> and <velocity> are integer values
7402       in the range between 0 .. 127, reflecting the analog meaning of the
7403       MIDI specification.
7404    
7405       CAUTION: no guarantee whatsoever will be made that MIDI events are
7406       actually all delivered by this mechanism!  With other words: events
7407       could be lost at any time!  This restriction was made to keep the RT-
7408       safeness of the backend's MIDI and audio thread unaffected by this
7409       feature.
7410    
7411    8.7.  MIDI data on a MIDI input device arrived
7412    
7413       Client may want to be notified when MIDI data arrive on MIDI input
7414       devices by issuing the following command:
7415    
7416          SUBSCRIBE DEVICE_MIDI
7417    
7418       Server will start sending one of the the following notification
7419       messages:
7420    
7421          "NOTIFY:DEVICE_MIDI:<device-id> <port-id> NOTE_ON <note>
7422          <velocity>"
7423    
7424          "NOTIFY:DEVICE_MIDI:<device-id> <port-id> NOTE_OFF <note>
7425          <velocity>"
7426    
7427       where <device-id> <port-id> will be replaced by the IDs of the
7428       respective MIDI input device and the device's MIDI port where the
7429       MIDI data arrived. <note> and <velocity> are integer values in the
7430       range between 0 .. 127, reflecting the analog meaning of the MIDI
7431       specification.
7432    
7433       CAUTION: no guarantee whatsoever will be made that MIDI events are
7434       actually all delivered by this mechanism!  With other words: events
7435       could be lost at any time!  This restriction was made to keep the RT-
7436       safeness of the backend's MIDI and audio thread unaffected by this
7437       feature.
7438    
7439  Schoenebeck               Expires July 2, 2007                 [Page 95]  8.8.  Number of active voices changed
7440    
7441       Client may want to be notified when the number of voices on the back-
7442       end changes by issuing the following command:
7443    
7444    
7445    
7446    
7447    Schoenebeck              Expires October 3, 2008              [Page 133]
7448    
7449  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
7450    
7451    
7452        "NOTIFY:VOICE_COUNT:<sampler-channel> <voices>        SUBSCRIBE VOICE_COUNT
7453    
7454       Server will start sending the following notification messages:
7455    
7456          "NOTIFY:VOICE_COUNT:<sampler-channel> <voices>"
7457    
7458     where <sampler-channel> will be replaced by the sampler channel the     where <sampler-channel> will be replaced by the sampler channel the
7459     voice count change occurred and <voices> by the new number of active     voice count change occurred and <voices> by the new number of active
7460     voices on that channel.     voices on that channel.
7461    
7462  8.7.  Number of active disk streams changed  8.9.  Number of active disk streams changed
7463    
7464     Client may want to be notified when the number of streams on the     Client may want to be notified when the number of streams on the
7465     back-end changes by issuing the following command: SUBSCRIBE     back-end changes by issuing the following command: SUBSCRIBE
# Line 5343  Internet-Draft        LinuxSampler Contr Line 7475  Internet-Draft        LinuxSampler Contr
7475     stream count change occurred and <streams> by the new number of     stream count change occurred and <streams> by the new number of
7476     active disk streams on that channel.     active disk streams on that channel.
7477    
7478  8.8.  Disk stream buffer fill state changed  8.10.  Disk stream buffer fill state changed
7479    
7480     Client may want to be notified when the buffer fill state of a disk     Client may want to be notified when the buffer fill state of a disk
7481     stream on the back-end changes by issuing the following command:     stream on the back-end changes by issuing the following command:
# Line 5360  Internet-Draft        LinuxSampler Contr Line 7492  Internet-Draft        LinuxSampler Contr
7492     Section 6.4.13 as if the "GET CHANNEL BUFFER_FILL PERCENTAGE"     Section 6.4.13 as if the "GET CHANNEL BUFFER_FILL PERCENTAGE"
7493     (Section 6.4.13) command was issued on this channel.     (Section 6.4.13) command was issued on this channel.
7494    
7495  8.9.  Channel information changed  8.11.  Channel information changed
7496    
7497     Client may want to be notified when changes were made to sampler     Client may want to be notified when changes were made to sampler
7498     channels on the back-end by issuing the following command:     channels on the back-end by issuing the following command:
7499    
       SUBSCRIBE CHANNEL_INFO  
7500    
    Server will start sending the following notification messages:  
7501    
7502    
7503    Schoenebeck              Expires October 3, 2008              [Page 134]
7504    
7505    Internet-Draft        LinuxSampler Control Protocol           April 2008
7506    
7507    
7508  Schoenebeck               Expires July 2, 2007                 [Page 96]        SUBSCRIBE CHANNEL_INFO
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
7509    
7510       Server will start sending the following notification messages:
7511    
7512        "NOTIFY:CHANNEL_INFO:<sampler-channel>"        "NOTIFY:CHANNEL_INFO:<sampler-channel>"
7513    
# Line 5386  Internet-Draft        LinuxSampler Contr Line 7518  Internet-Draft        LinuxSampler Contr
7518     rather than real time events happening on the server, it is believed     rather than real time events happening on the server, it is believed
7519     that an empty notification message is sufficient here.     that an empty notification message is sufficient here.
7520    
7521  8.10.  Total number of active voices changed  8.12.  Number of effect sends changed
7522    
7523       Client may want to be notified when the number of effect sends on a
7524       particular sampler channel is changed by issuing the following
7525       command:
7526    
7527          SUBSCRIBE FX_SEND_COUNT
7528    
7529       Server will start sending the following notification messages:
7530    
7531          "NOTIFY:FX_SEND_COUNT:<channel-id> <fx-sends>"
7532    
7533       where <channel-id> will be replaced by the numerical ID of the
7534       sampler channel, on which the effect sends number is changed and <fx-
7535       sends> will be replaced by the new number of effect sends on that
7536       channel.
7537    
7538    8.13.  Effect send information changed
7539    
7540       Client may want to be notified when changes were made to effect sends
7541       on a a particular sampler channel by issuing the following command:
7542    
7543          SUBSCRIBE FX_SEND_INFO
7544    
7545       Server will start sending the following notification messages:
7546    
7547          "NOTIFY:FX_SEND_INFO:<channel-id> <fx-send-id>"
7548    
7549       where <channel-id> will be replaced by the numerical ID of the
7550       sampler channel, on which an effect send entity is changed and <fx-
7551       send-id> will be replaced by the numerical ID of the changed effect
7552       send.
7553    
7554    
7555    
7556    
7557    
7558    
7559    Schoenebeck              Expires October 3, 2008              [Page 135]
7560    
7561    Internet-Draft        LinuxSampler Control Protocol           April 2008
7562    
7563    
7564    8.14.  Total number of active voices changed
7565    
7566     Client may want to be notified when the total number of voices on the     Client may want to be notified when the total number of voices on the
7567     back-end changes by issuing the following command:     back-end changes by issuing the following command:
# Line 5395  Internet-Draft        LinuxSampler Contr Line 7570  Internet-Draft        LinuxSampler Contr
7570    
7571     Server will start sending the following notification messages:     Server will start sending the following notification messages:
7572    
7573        "NOTIFY:TOTAL_VOICE_COUNT:<voices>        "NOTIFY:TOTAL_VOICE_COUNT:<voices>"
7574    
7575     where <voices> will be replaced by the new number of all currently     where <voices> will be replaced by the new number of all currently
7576     active voices.     active voices.
7577    
7578  8.11.  Number of MIDI instrument maps changed  8.15.  Total number of active disk streams changed
7579    
7580       Client may want to be notified when the total number of disk streams
7581       on the back-end changes by issuing the following command:
7582    
7583          SUBSCRIBE TOTAL_STREAM_COUNT
7584    
7585       Server will start sending the following notification messages:
7586    
7587          "NOTIFY:TOTAL_STREAM_COUNT:<streams>"
7588    
7589       where <streams> will be replaced by the new number of all currently
7590       active disk streams.
7591    
7592    8.16.  Number of MIDI instrument maps changed
7593    
7594     Client may want to be notified when the number of MIDI instrument     Client may want to be notified when the number of MIDI instrument
7595     maps on the back-end changes by issuing the following command:     maps on the back-end changes by issuing the following command:
# Line 5414  Internet-Draft        LinuxSampler Contr Line 7603  Internet-Draft        LinuxSampler Contr
7603     where <maps> will be replaced by the new number of MIDI instrument     where <maps> will be replaced by the new number of MIDI instrument
7604     maps.     maps.
7605    
7606  8.12.  MIDI instrument map information changed  8.17.  MIDI instrument map information changed
7607    
7608     Client may want to be notified when changes were made to MIDI     Client may want to be notified when changes were made to MIDI
7609     instrument maps on the back-end by issuing the following command:     instrument maps on the back-end by issuing the following command:
7610    
       SUBSCRIBE MIDI_INSTRUMENT_MAP_INFO  
   
    Server will start sending the following notification messages:  
7611    
7612    
7613    
7614    
7615    Schoenebeck              Expires October 3, 2008              [Page 136]
7616    
7617    Internet-Draft        LinuxSampler Control Protocol           April 2008
7618    
7619    
7620  Schoenebeck               Expires July 2, 2007                 [Page 97]        SUBSCRIBE MIDI_INSTRUMENT_MAP_INFO
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
7621    
7622       Server will start sending the following notification messages:
7623    
7624        "NOTIFY:MIDI_INSTRUMENT_MAP_INFO:<map-id>"        "NOTIFY:MIDI_INSTRUMENT_MAP_INFO:<map-id>"
7625    
# Line 5443  Internet-Draft        LinuxSampler Contr Line 7631  Internet-Draft        LinuxSampler Contr
7631     happening on the server, it is believed that an empty notification     happening on the server, it is believed that an empty notification
7632     message is sufficient here.     message is sufficient here.
7633    
7634  8.13.  Number of MIDI instruments changed  8.18.  Number of MIDI instruments changed
7635    
7636     Client may want to be notified when the number of MIDI instrument     Client may want to be notified when the number of MIDI instrument
7637     maps on the back-end changes by issuing the following command:     maps on the back-end changes by issuing the following command:
# Line 5458  Internet-Draft        LinuxSampler Contr Line 7646  Internet-Draft        LinuxSampler Contr
7646     which the nuber of instruments has changed and <instruments> will be     which the nuber of instruments has changed and <instruments> will be
7647     replaced by the new number of MIDI instruments in the specified map.     replaced by the new number of MIDI instruments in the specified map.
7648    
7649  8.14.  MIDI instrument information changed  8.19.  MIDI instrument information changed
7650    
7651     Client may want to be notified when changes were made to MIDI     Client may want to be notified when changes were made to MIDI
7652     instruments on the back-end by issuing the following command:     instruments on the back-end by issuing the following command:
# Line 5480  Internet-Draft        LinuxSampler Contr Line 7668  Internet-Draft        LinuxSampler Contr
7668    
7669    
7670    
7671    Schoenebeck              Expires October 3, 2008              [Page 137]
7672    
7673    Internet-Draft        LinuxSampler Control Protocol           April 2008
7674    
7675    
7676    8.20.  Global settings changed
7677    
7678       Client may want to be notified when changes to the global settings of
7679       the sampler were made by issuing the following command:
7680    
7681  Schoenebeck               Expires July 2, 2007                 [Page 98]        SUBSCRIBE GLOBAL_INFO
   
 Internet-Draft        LinuxSampler Control Protocol        December 2006  
7682    
7683       Server will start sending the following types of notification
7684       messages:
7685    
7686  8.15.  Miscellaneous and debugging events        "NOTIFY:GLOBAL_INFO:VOLUME <volume>" - Notifies that the golbal
7687          volume of the sampler is changed, where <volume> will be replaced
7688          by the optional dotted floating point value, reflecting the new
7689          global volume parameter.
7690    
7691     Client may want to be notified of miscellaneous and debugging events  8.21.  Number of database instrument directories changed
    occurring at the server by issuing the following command:  
7692    
7693        SUBSCRIBE MISCELLANEOUS     Client may want to be notified when the number of instrument
7694       directories in a particular directory in the instruments database is
7695       changed by issuing the following command:
7696    
7697          SUBSCRIBE DB_INSTRUMENT_DIRECTORY_COUNT
7698    
7699     Server will start sending the following notification messages:     Server will start sending the following notification messages:
7700    
7701        "NOTIFY:MISCELLANEOUS:<string>"        "NOTIFY:DB_INSTRUMENT_DIRECTORY_COUNT:<dir-path>"
7702    
7703     where <string> will be replaced by whatever data server wants to send     where <dir-path> will be replaced by the absolute path name of the
7704     to the client.  Client MAY display this data to the user AS IS to     directory in the instruments database, in which the number of
7705     facilitate debugging.     directories is changed.
7706    
7707       Note that when a non-empty directory is removed, this event is not
7708       sent for the subdirectories in that directory.
7709    
7710    8.22.  Database instrument directory information changed
7711    
7712       Client may want to be notified when changes were made to directories
7713       in the instruments database by issuing the following command:
7714    
7715          SUBSCRIBE DB_INSTRUMENT_DIRECTORY_INFO
7716    
7717       Server will start sending the following notification messages:
7718    
7719          "NOTIFY:DB_INSTRUMENT_DIRECTORY_INFO:<dir-path>"
7720    
7721       where <dir-path> will be replaced by the absolute path name of the
7722       directory, for which information changes occurred.  The front-end
7723       will have to send the respective command to actually get the updated
7724    
7725    
7726    
7727    Schoenebeck              Expires October 3, 2008              [Page 138]
7728    
7729    Internet-Draft        LinuxSampler Control Protocol           April 2008
7730    
7731    
7732       directory info.  Because these messages will be triggered by LSCP
7733       commands issued by other clients rather than real time events
7734       happening on the server, it is believed that an empty notification
7735       message is sufficient here.
7736    
7737          "NOTIFY:DB_INSTRUMENT_DIRECTORY_INFO:NAME <old-dir-path> <new-
7738          name>"
7739    
7740       where <old-dir-path> is the old absolute path name of the directory
7741       (encapsulated into apostrophes), which name is changes and <new-name>
7742       is the new name of the directory, encapsulated into apostrophes.
7743    
7744    8.23.  Number of database instruments changed
7745    
7746       Client may want to be notified when the number of instruments in a
7747       particular directory in the instruments database is changed by
7748       issuing the following command:
7749    
7750          SUBSCRIBE DB_INSTRUMENT_COUNT
7751    
7752       Server will start sending the following notification messages:
7753    
7754          "NOTIFY:DB_INSTRUMENT_COUNT:<dir-path>"
7755    
7756       where <dir-path> will be replaced by the absolute path name of the
7757       directory in the instruments database, in which the number of
7758       instruments is changed.
7759    
7760       Note that when a non-empty directory is removed, this event is not
7761       sent for the instruments in that directory.
7762    
7763    8.24.  Database instrument information changed
7764    
7765       Client may want to be notified when changes were made to instruments
7766       in the instruments database by issuing the following command:
7767    
7768          SUBSCRIBE DB_INSTRUMENT_INFO
7769    
7770       Server will start sending the following notification messages:
7771    
7772          "NOTIFY:DB_INSTRUMENT_INFO:<instr-path>"
7773    
7774       where <instr-path> will be replaced by the absolute path name of the
7775       instrument, which settings are changed.  The front-end will have to
7776       send the respective command to actually get the updated directory
7777       info.  Because these messages will be triggered by LSCP commands
7778       issued by other clients rather than real time events happening on the
7779       server, it is believed that an empty notification message is
7780    
7781    
7782    
7783    Schoenebeck              Expires October 3, 2008              [Page 139]
7784    
7785    Internet-Draft        LinuxSampler Control Protocol           April 2008
7786    
7787    
7788       sufficient here.
7789    
7790          "NOTIFY:DB_INSTRUMENT_INFO:NAME <old-instr-path> <new-name>"
7791    
7792       where <old-instr-path> is the old absolute path name of the
7793       instrument (encapsulated into apostrophes), which name is changes and
7794       <new-name> is the new name of the instrument, encapsulated into
7795       apostrophes.
7796    
7797    8.25.  Database job status information changed
7798    
7799       Client may want to be notified when the status of particular database
7800       instruments job is changed by issuing the following command:
7801    
7802          SUBSCRIBE DB_INSTRUMENTS_JOB_INFO
7803    
7804       Server will start sending the following notification messages:
7805    
7806          "NOTIFY:DB_INSTRUMENTS_JOB_INFO:<job-id>"
7807    
7808       where <job-id> will be replaced by the numerical ID of the job, which
7809       status is changed.  The front-end will have to send the respective
7810       command to actually get the status info.  Because these messages will
7811       be triggered by LSCP commands issued by other clients rather than
7812       real time events happening on the server, it is believed that an
7813       empty notification message is sufficient here.
7814    
7815    8.26.  Miscellaneous and debugging events
7816    
7817  Schoenebeck               Expires July 2, 2007                 [Page 99]     Client may want to be notified of miscellaneous and debugging events
7818       occurring at the server by issuing the following command:
7819    
7820          SUBSCRIBE MISCELLANEOUS
7821    
7822       Server will start sending the following notification messages:
7823    
7824          "NOTIFY:MISCELLANEOUS:<string>"
7825    
7826       where <string> will be replaced by whatever data server wants to send
7827       to the client.  Client MAY display this data to the user AS IS to
7828       facilitate debugging.
7829    
7830    
7831    
7832    
7833    
7834    
7835    
7836    
7837    
7838    
7839    Schoenebeck              Expires October 3, 2008              [Page 140]
7840    
7841  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
7842    
7843    
7844  9.  Security Considerations  9.  Security Considerations
# Line 5596  Internet-Draft        LinuxSampler Contr Line 7892  Internet-Draft        LinuxSampler Contr
7892    
7893    
7894    
7895  Schoenebeck               Expires July 2, 2007                [Page 100]  Schoenebeck              Expires October 3, 2008              [Page 141]
7896    
7897  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
7898    
7899    
7900  10.  Acknowledgments  10.  Acknowledgments
# Line 5652  Internet-Draft        LinuxSampler Contr Line 7948  Internet-Draft        LinuxSampler Contr
7948    
7949    
7950    
7951  Schoenebeck               Expires July 2, 2007                [Page 101]  Schoenebeck              Expires October 3, 2008              [Page 142]
7952    
7953  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
7954    
7955    
7956  11.  References  11.  References
7957    
7958       [RFC20]    UCLA, "ASCII format for Network Interchange", RFC 20,
7959                  1969.
7960    
7961     [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate     [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
7962                Requirement Levels", RFC 2119, 1997.                Requirement Levels", RFC 2119, 1997.
7963    
# Line 5705  Internet-Draft        LinuxSampler Contr Line 8004  Internet-Draft        LinuxSampler Contr
8004    
8005    
8006    
8007    Schoenebeck              Expires October 3, 2008              [Page 143]
   
   
 Schoenebeck               Expires July 2, 2007                [Page 102]  
8008    
8009  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
8010    
8011    
8012  Author's Address  Author's Address
# Line 5764  Author's Address Line 8060  Author's Address
8060    
8061    
8062    
8063  Schoenebeck               Expires July 2, 2007                [Page 103]  Schoenebeck              Expires October 3, 2008              [Page 144]
8064    
8065  Internet-Draft        LinuxSampler Control Protocol        December 2006  Internet-Draft        LinuxSampler Control Protocol           April 2008
8066    
8067    
8068  Full Copyright Statement  Full Copyright Statement
8069    
8070     Copyright (C) The Internet Society (2006).     Copyright (C) The IETF Trust (2008).
8071    
8072     This document is subject to the rights, licenses and restrictions     This document is subject to the rights, licenses and restrictions
8073     contained in BCP 78, and except as set forth therein, the authors     contained in BCP 78, and except as set forth therein, the authors
# Line 5779  Full Copyright Statement Line 8075  Full Copyright Statement
8075    
8076     This document and the information contained herein are provided on an     This document and the information contained herein are provided on an
8077     "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS     "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
8078     OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET     OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
8079     ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,     THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
8080     INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE     OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
8081     INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED     THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
8082     WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.     WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
8083    
8084    
# Line 5811  Intellectual Property Line 8107  Intellectual Property
8107     ietf-ipr@ietf.org.     ietf-ipr@ietf.org.
8108    
8109    
 Acknowledgment  
8110    
    Funding for the RFC Editor function is provided by the IETF  
    Administrative Support Activity (IASA).  
8111    
8112    
8113    
8114    
8115    
8116  Schoenebeck               Expires July 2, 2007                [Page 104]  
8117    
8118    
8119    Schoenebeck              Expires October 3, 2008              [Page 145]
8120    
Legend:
Removed from v.1006  
changed lines
  Added in v.1731
  ViewVC Help
Powered by ViewVC