trunk/osx/README.osx

Compiling libgig for Mac OS X with XCode
========================================

Requirements
------------

  The XCode project uses autotools build files. On Mac OS 10.4, you need
  to install pkg-config (available at http://pkgconfig.freedesktop.org/wiki/).
  
  If you are to build the CVS snapshot, then you need to do the following
  steps to make autotools work correctly:
  
  $ sudo ln -sf /usr/bin/glibtoolize /usr/local/bin/libtoolize
  $ sudo cat >/usr/local/bin/aclocal <<'EOF'
  #!/bin/sh
  /usr/bin/aclocal -I /usr/local/share/aclocal $@
  EOF
  $ sudo chmod +x /usr/local/bin/aclocal
  
Layout of the Directories
-------------------------

  The XCode project for libgig creates a temporary build directory as
  "$LIBGIG/../temp_build/$BUILD_STYLE" (where $LIBGIG is the libgig 
  directory, and $BUILD_STYLE is the build style defined in the XCode 
  project). In this directory, the following subdirectories are created 
  and used:
    $BASEGIG.build:
      Intermediate build directory. Symbolic links to the original 
      source files are placed and "configure && make" is performed in 
      this directory. ($BASEGIG is the basename of the libgig directory.)
    local:
      The products are "installed" in this directory. libgig.a is in
      local/lib, and gigdump, gigextract, dlsdump, rifftree are in
      local/bin.
  Such a layout allows you to build binaries of different architectures
  (and build options) independently. On the other hand, you will need to
  link libgig.a statically because you cannot expect other users to place
  libgig.a at the same path. The XCode project takes care of this by
  giving "--disable-shared" to configure.
  
  Also note that this temporary directory is outside the libgig directory
  and will be shared with the Xcode projects for other linuxsampler 
  subproducts. So it is best to create a common directory for all 
  linuxsampler subproducts and place the libgig directory (and the
  directories of other linuxsampler subproducts) in it.

Universal Binaries
------------------

  You can create the Universal Binaries by selecting "Deployment_UB" build
  style and build. The binaries for i386 and ppc architectures are built
  separately and then automatically combined. The products are found in
  $LIBGIG/../temp_build/Deployment_UB/local/{bin,lib}.
  
  You can also create the binaries for i386 and ppc architectures
  separately by selecting "Deployment_i386" and "Deployment_ppc" built
  styles respectively. This may be more convenient when you make your
  binary exclusively for your own use, and/or the required libraries
  (e.g. libsndfile, see below) are available only for a single
  architecture.

  Note that the current XCode project does _not_ take care of libgig.la
  and pkgconfig/gig.pc when creating the Universal Binary.
  
  The libgig project is dependent on libsndfile, but you may not 
  have a Universal Binary version of libsndfile. Don't worry, you 
  can still create UB of libgig products. Follow these steps:
  
  - Get the sources of libsndfile and extract in $LIBGIG/..
  - cd to $LIBGIG/../libsndfile-*
  - env BUILD_STYLE=Deployment_ppc \
    WITH_INSTALL=1 \
    CONFIG_OPTIONS="--disable-shared" \
    BUILD_BASE_DIR="$PWD/../temp_build" \
    SDKROOT="/Developer/SDKs/MacOSX10.4u.sdk" \
    /bin/sh $LIBGIG/osx/autoconf_builder.sh 
  - env BUILD_STYLE=Deployment_i386 \
    WITH_INSTALL=1 \
    CONFIG_OPTIONS="--disable-shared" \
    BUILD_BASE_DIR="$PWD/../temp_build" \
    SDKROOT="/Developer/SDKs/MacOSX10.4u.sdk" \
    /bin/sh $LIBGIG/osx/autoconf_builder.sh 

  After these steps, the i386 and ppc versions of libsndfile.a are
  created in $LIBGIG/../temp_build/Deployment_$ARCH/local/lib 
  ($ARCH is either i386 or ppc). Now you can double-click on 
  libgig.xcodeproj and build libgig with Deployment_UB build style.
  When XCode is building libgig for each architecture, pkg-config 
  will find the correct version of libsndfile.a in $LIBGIG/../
  temp_build/Deployment_{ppc,i386}/local/lib.

  (You can also easily create a Universal Binary of libsndfile.a,
  but then you need to take care manually of the contents of 
  libsndfile.la and pkgconfig/sndfile.pc.)

Additional Information
----------------------

  The XCode project just invokes autoconf_builder.sh after
  setting relevant environmental variables. If you are interested
  (or feel suspicious), please examine autoconf_builder.sh.


6 May 2007: First written by Toshi Nagata
9 May 2007: Updated to account for the Deployment_UB target

1	Compiling libgig for Mac OS X with XCode
2	========================================
3
4	Requirements
5	------------
6
7	The XCode project uses autotools build files. On Mac OS 10.4, you need
8	to install pkg-config (available at http://pkgconfig.freedesktop.org/wiki/).
9
10	If you are to build the CVS snapshot, then you need to do the following
11	steps to make autotools work correctly:
12
13	$ sudo ln -sf /usr/bin/glibtoolize /usr/local/bin/libtoolize
14	$ sudo cat >/usr/local/bin/aclocal <<'EOF'
15	#!/bin/sh
16	/usr/bin/aclocal -I /usr/local/share/aclocal $@
17	EOF
18	$ sudo chmod +x /usr/local/bin/aclocal
19
20	Layout of the Directories
21	-------------------------
22
23	The XCode project for libgig creates a temporary build directory as
24	"$LIBGIG/../temp_build/$BUILD_STYLE" (where $LIBGIG is the libgig
25	directory, and $BUILD_STYLE is the build style defined in the XCode
26	project). In this directory, the following subdirectories are created
27	and used:
28	$BASEGIG.build:
29	Intermediate build directory. Symbolic links to the original
30	source files are placed and "configure && make" is performed in
31	this directory. ($BASEGIG is the basename of the libgig directory.)
32	local:
33	The products are "installed" in this directory. libgig.a is in
34	local/lib, and gigdump, gigextract, dlsdump, rifftree are in
35	local/bin.
36	Such a layout allows you to build binaries of different architectures
37	(and build options) independently. On the other hand, you will need to
38	link libgig.a statically because you cannot expect other users to place
39	libgig.a at the same path. The XCode project takes care of this by
40	giving "--disable-shared" to configure.
41
42	Also note that this temporary directory is outside the libgig directory
43	and will be shared with the Xcode projects for other linuxsampler
44	subproducts. So it is best to create a common directory for all
45	linuxsampler subproducts and place the libgig directory (and the
46	directories of other linuxsampler subproducts) in it.
47
48	Universal Binaries
49	------------------
50
51	You can create the Universal Binaries by selecting "Deployment_UB" build
52	style and build. The binaries for i386 and ppc architectures are built
53	separately and then automatically combined. The products are found in
54	$LIBGIG/../temp_build/Deployment_UB/local/{bin,lib}.
55
56	You can also create the binaries for i386 and ppc architectures
57	separately by selecting "Deployment_i386" and "Deployment_ppc" built
58	styles respectively. This may be more convenient when you make your
59	binary exclusively for your own use, and/or the required libraries
60	(e.g. libsndfile, see below) are available only for a single
61	architecture.
62
63	Note that the current XCode project does _not_ take care of libgig.la
64	and pkgconfig/gig.pc when creating the Universal Binary.
65
66	The libgig project is dependent on libsndfile, but you may not
67	have a Universal Binary version of libsndfile. Don't worry, you
68	can still create UB of libgig products. Follow these steps:
69
70	- Get the sources of libsndfile and extract in $LIBGIG/..
71	- cd to $LIBGIG/../libsndfile-*
72	- env BUILD_STYLE=Deployment_ppc \
73	WITH_INSTALL=1 \
74	CONFIG_OPTIONS="--disable-shared" \
75	BUILD_BASE_DIR="$PWD/../temp_build" \
76	SDKROOT="/Developer/SDKs/MacOSX10.4u.sdk" \
77	/bin/sh $LIBGIG/osx/autoconf_builder.sh
78	- env BUILD_STYLE=Deployment_i386 \
79	WITH_INSTALL=1 \
80	CONFIG_OPTIONS="--disable-shared" \
81	BUILD_BASE_DIR="$PWD/../temp_build" \
82	SDKROOT="/Developer/SDKs/MacOSX10.4u.sdk" \
83	/bin/sh $LIBGIG/osx/autoconf_builder.sh
84
85	After these steps, the i386 and ppc versions of libsndfile.a are
86	created in $LIBGIG/../temp_build/Deployment_$ARCH/local/lib
87	($ARCH is either i386 or ppc). Now you can double-click on
88	libgig.xcodeproj and build libgig with Deployment_UB build style.
89	When XCode is building libgig for each architecture, pkg-config
90	will find the correct version of libsndfile.a in $LIBGIG/../
91	temp_build/Deployment_{ppc,i386}/local/lib.
92
93	(You can also easily create a Universal Binary of libsndfile.a,
94	but then you need to take care manually of the contents of
95	libsndfile.la and pkgconfig/sndfile.pc.)
96
97	Additional Information
98	----------------------
99
100	The XCode project just invokes autoconf_builder.sh after
101	setting relevant environmental variables. If you are interested
102	(or feel suspicious), please examine autoconf_builder.sh.
103
104
105	6 May 2007: First written by Toshi Nagata
106	9 May 2007: Updated to account for the Deployment_UB target
107