/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Annotation of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 3818 - (hide annotations) (download)
Sat Aug 29 16:37:35 2020 UTC (3 years, 6 months ago) by schoenebeck
File size: 62664 byte(s)
* NKSP VM: Fixed the "release" handler being executed too often under
  certain situations if polyphonic data was passed from "note" handler to
  "release" handler.

* Bumped version (2.1.1.svn64).

1 schoenebeck 697 #------------------------------------------------------------------------------------
2     # LinuxSampler's / liblinuxsampler's "official" release version:
3    
4 schoenebeck 2787 m4_define(linuxsampler_release_major, 2)
5 schoenebeck 3372 m4_define(linuxsampler_release_minor, 1)
6 schoenebeck 3818 m4_define(linuxsampler_release_build, 1.svn64)
7 schoenebeck 697
8 persson 2365
9     AC_INIT([linuxsampler],[linuxsampler_release_major.linuxsampler_release_minor.linuxsampler_release_build])
10 persson 2368 AC_CONFIG_SRCDIR([configure.ac])
11 persson 2365
12 schoenebeck 697 #------------------------------------------------------------------------------------
13     # The following is the libtool / shared library version. This doesn't have to
14     # do anything with the release version. It MUST conform to the following rules:
15     #
16     # 1. Start with version information of `0:0:0' for each libtool library.
17     # 2. Update the version information only immediately before a public release of
18     # your software. More frequent updates are unnecessary, and only guarantee
19     # that the current interface number gets larger faster.
20     # 3. If the library source code has changed at all since the last update, then
21     # increment revision (`c:r:a' becomes `c:r+1:a').
22     # 4. If any interfaces have been added, removed, or changed since the last update,
23     # increment current, and set revision to 0.
24     # 5. If any interfaces have been added since the last public release, then increment
25     # age.
26     # 6. If any interfaces have been removed since the last public release, then set age
27     # to 0.
28    
29 schoenebeck 3372 LIBLINUXSAMPLER_LT_CURRENT=5
30 schoenebeck 697 LIBLINUXSAMPLER_LT_REVISION=0
31 schoenebeck 1956 LIBLINUXSAMPLER_LT_AGE=0
32 schoenebeck 697 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
33    
34 schoenebeck 947 #------------------------------------------------------------------------------------
35     # the LSCP specification version this LinuSampler release complies with:
36    
37     LSCP_RELEASE_MAJOR=1
38 schoenebeck 2787 LSCP_RELEASE_MINOR=7
39 schoenebeck 947
40     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
41     AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
42    
43 persson 2578 AM_INIT_AUTOMAKE([subdir-objects])
44 schoenebeck 2535 AC_PROG_CC
45 schoenebeck 1741 AC_PROG_CXX
46 persson 1777 AC_LIBTOOL_WIN32_DLL
47 persson 2365 AC_PROG_LIBTOOL
48 schoenebeck 2581 AC_PROG_LEX
49 schoenebeck 2518 AC_PROG_YACC
50 schoenebeck 697
51     AC_SUBST(SHLIB_VERSION_ARG)
52     AC_SUBST(SHARED_VERSION_INFO)
53    
54 persson 2360 module=yes eval LIB_EXT=$shrext_cmds
55     AC_SUBST(LIB_EXT)
56    
57 schoenebeck 12 AC_C_BIGENDIAN
58 persson 1895 AC_CANONICAL_HOST
59 schoenebeck 9
60 schoenebeck 1639 PKG_PROG_PKG_CONFIG
61 schoenebeck 275
62 schoenebeck 554 ###########################################################################
63     # General Checks
64 schoenebeck 275
65 persson 1931 AM_CONDITIONAL(CROSS_COMPILING, test $cross_compiling = yes)
66    
67 schoenebeck 3581 # make sure C++14 is supported by compiler
68     # (add CXXFLAGS if required [e.g. -std=c++14])
69 schoenebeck 3557 m4_ifdef([m4_include(m4/ax_cxx_compile_stdcxx.m4)],,
70     [sinclude([m4/ax_cxx_compile_stdcxx.m4])])
71 schoenebeck 3581 AX_CXX_COMPILE_STDCXX(14, [], mandatory)
72 schoenebeck 3557
73 schoenebeck 510 AC_MSG_CHECKING([whether x86 architecture])
74 schoenebeck 9 def_arch_x86=0
75 persson 1895 case $host_cpu in
76 persson 1794 "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
77 schoenebeck 9 echo "yes"
78     def_arch_x86=1;;
79     *)
80     echo "no";;
81     esac
82     AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
83    
84 schoenebeck 510 # determine the right gcc switch for CPU specific optimizations
85 schoenebeck 829 # (only if the user did not provide one)
86 schoenebeck 510 CXX_CPU_SWITCH=
87 schoenebeck 829 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
88 persson 1895 if test "$def_arch_x86" = 1 -a "$host_cpu" != "x86_64"; then
89     CXX_CPU_SWITCH="-march=$host_cpu"
90 schoenebeck 909 elif test "$target_cpu" = "ppc"; then
91 persson 1895 CXX_CPU_SWITCH="-arch=$host_cpu"
92 schoenebeck 829 fi
93 schoenebeck 510 fi
94     AC_SUBST([CXX_CPU_SWITCH])
95    
96 persson 2197 mac=no
97     linux=no
98     case "$host" in
99     *-*-darwin*)
100     mac=yes
101     ;;
102     *-*-linux*)
103     linux=yes
104     ;;
105     esac
106     AM_CONDITIONAL(LINUX, test "$linux" = yes)
107     AM_CONDITIONAL(MAC, test "$mac" = yes)
108    
109 senoner 1502 # check if we're on MS Windows
110     AC_CHECK_HEADERS(
111     mmsystem.h,
112     have_windows=1,
113 persson 1895 have_windows=0,
114     [#include <windef.h>]
115 senoner 1502 )
116     AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
117    
118 schoenebeck 288 AC_MSG_CHECKING([whether UNIX98 compatible])
119 persson 2365 AC_LANG_PUSH([C])
120     AC_RUN_IFELSE([AC_LANG_SOURCE([[
121 schoenebeck 288 #ifndef _GNU_SOURCE
122     #define _GNU_SOURCE 1
123     #endif
124     #include <features.h>
125     void main(void) {
126     #if _XOPEN_SOURCE >= 500
127     exit(0); /* UNIX98 compatible */
128     #else
129     exit(-1); /* not UNIX98 compatible */
130     #endif
131     }
132 persson 2365 ]])],
133 schoenebeck 288 have_unix98="yes",
134     have_unix98="no",
135     have_unix98="no"
136     )
137 persson 2365 AC_LANG_POP([C])
138 schoenebeck 288 AC_MSG_RESULT([$have_unix98])
139 persson 2369 if test "$have_unix98" = "no" -a "$have_windows" = "0" -a "$mac" = "no" ; then
140 schoenebeck 288 if test "x$HAVE_UNIX98" = "x"; then
141     echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
142 persson 2365 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run"
143     echo "./configure with environment variable HAVE_UNIX98=1 in case you think you"
144 schoenebeck 288 echo "have a UNIX98 compatible system."
145     exit -1;
146     fi
147     fi
148    
149 wylder 822 # check for <features.h>
150     AC_CHECK_HEADERS(features.h)
151 wylder 821
152 schoenebeck 1454 # test for POSIX thread library
153     m4_ifdef([m4_include(m4/pthread.m4)],,
154     [sinclude([m4/pthread.m4])])
155     ACX_PTHREAD
156     LIBS="$PTHREAD_LIBS $LIBS"
157     CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
158     CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
159     CC="$PTHREAD_CC"
160 schoenebeck 852
161 schoenebeck 3035
162     # check for compiler's pragma diagnostic capabilities
163     m4_ifdef([m4_include(m4/pragma_diagnostics.m4)],,
164     [sinclude([m4/pragma_diagnostics.m4])])
165     ACX_CXX_PRAGMA_DIAGNOSTICS
166    
167    
168 schoenebeck 1454 # check for a bug in NPTL-enabled glibc
169     # (see Gentoo bug report #194076)
170     AC_ARG_ENABLE(nptl-bug-check,
171     [ --disable-nptl-bug-check
172     Disable check for a bug in certain NPTL-enabled
173     glibc versions that caused crashs.],
174     [config_check_nptl_bug="$enableval"],
175     [config_check_nptl_bug="yes"]
176     )
177     if test "$config_check_nptl_bug" = "yes"; then
178     m4_ifdef([m4_include(m4/nptl_bug.m4)],,
179     [sinclude([m4/nptl_bug.m4])])
180     ACX_NPTL_GLIBC_BUG([
181     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
182     echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
183     echo "probably crash due to this. Please report us the system you are"
184     echo "using and/or file a bug report to the bug tracking system of"
185     echo "your distribution."
186     echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
187     echo "well, you can try to circumvent this problem for now by setting"
188     echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
189     echo "should cause this test to pass."
190     echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
191     AC_MSG_ERROR([possibly NPTL glibc bug detected])
192     ])
193     else
194     echo "NPTL glibc bug check disabled"
195     fi
196    
197    
198 schoenebeck 3739 # check whether C++ compiler supports "designated initializers"
199     echo -n "Checking whether C++ compiler supports designated initializers (partly)... "
200     AC_LANG_PUSH([C++])
201     AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
202     #include <stdlib.h>
203     struct Foo {
204     int a;
205     float b;
206     bool c;
207     char d;
208     };
209     static void bar(Foo o) {
210     }
211     int main() {
212     bar({
213     .a = 2,
214     .b = 4.3f,
215     .c = true,
216     .d = 'z'
217     });
218     return 0;
219     }
220     ]])],
221     [cxx_designated_init_partly="yes"],
222     [cxx_designated_init_partly="no"]
223     )
224     AC_LANG_POP([C++])
225     if test $cxx_designated_init_partly = "yes"; then
226     echo "yes"
227     else
228     echo "NO"
229     echo '!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!'
230     echo '! !'
231     echo '! ERROR: Selected C++ compiler does not support designated !'
232     echo '! initializers at all, not even partly! !'
233     echo '! !'
234     echo '! Please either update your C++ compiler or select a !'
235     echo '! different compiler (e.g. GCC >= 8 or clang >= 5). If you !'
236     echo '! have several C++ compilers installed on your machine, you !'
237     echo '! can easily select a different compiler by environment !'
238     echo '! variable, e.g. to compile with clang instead: !'
239     echo '! !'
240     echo '! CXX=clang++ CC=clang ./configure && make !'
241     echo '! !'
242     echo '!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!'
243     exit -1
244     fi
245     echo -n "Checking whether C++ compiler fully supports designated initializers... "
246     AC_LANG_PUSH([C++])
247     AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
248     #include <stdlib.h>
249     struct Foo {
250     int a;
251     float b;
252     bool c;
253     char d;
254     };
255     static void bar(Foo o) {
256     }
257     int main() {
258     bar({
259     .d = 'z',
260     .a = 2
261     });
262     return 0;
263     }
264     ]])],
265     [cxx_designated_init_fully="yes"],
266     [cxx_designated_init_fully="no"]
267     )
268     AC_LANG_POP([C++])
269     if test $cxx_designated_init_fully = "yes"; then
270     echo "yes"
271     else
272     echo 'NO'
273     echo '***************************************************************'
274     echo '* *'
275     echo '* WARNING: Selected C++ compiler does not fully support *'
276     echo '* designated initializers (only partly)! *'
277     echo '* *'
278     echo '* You will be able to compile LinuxSampler, but you will not *'
279     echo '* be able to compile the test cases. Consider updating your *'
280     echo '* C++ compiler or switching to a different compiler. Chances *'
281     echo '* are that LinuxSampler will soon no longer support your *'
282     echo '* compiler. *'
283     echo '* *'
284     echo '* If you have several C++ compilers installed on your machine,*'
285     echo '* you can easily select a different compiler by environment *'
286     echo '* variable, e.g. to compile with clang instead: *'
287     echo '* *'
288     echo '* CXX=clang++ CC=clang ./configure && make *'
289     echo '* *'
290     echo '***************************************************************'
291     fi
292    
293    
294 schoenebeck 2518 # In case Bison is available, determine the exact version, since we need to
295     # use different custom parser code for Bison 2.x vs. Bison 3.x generated
296     # parser yacc tables.
297     if echo "$YACC" | grep -q bison; then
298     # NOTE: m4 removes [], that's why it needs to be escaped
299     bison_version=[`$YACC --version | head -n 1 | sed -e 's/[^0-9.]*\([-0-9.]\+\)$/\1/'`]
300     bison_version_major=`echo $bison_version | cut -d. -f1`
301     bison_version_minor=`echo $bison_version | cut -d. -f2`
302     AC_DEFINE_UNQUOTED(HAVE_BISON_MAJ,$bison_version_major,[Define to the major version of the GNU Bison program installed.])
303     AC_DEFINE_UNQUOTED(HAVE_BISON_MIN,$bison_version_minor,[Define to the minor version of the GNU Bison program installed.])
304     fi
305 schoenebeck 1454
306 schoenebeck 1742
307 schoenebeck 2518
308 schoenebeck 852 ###########################################################################
309 schoenebeck 288 # Checks for available audio and MIDI systems / drivers
310     # (we throw an error if there's not at least one system for audio output and MIDI input available)
311 schoenebeck 852
312 schoenebeck 288 have_midi_input_driver="false"
313     have_audio_output_driver="false"
314    
315 schoenebeck 852 # ALSA
316     AC_ARG_ENABLE(alsa-driver,
317     [ --disable-alsa-driver
318     Disable support for the Advanced Linux Sound
319     Architecture (ALSA).],
320 schoenebeck 1360 [config_alsa_driver="$enableval"],
321 schoenebeck 852 [config_alsa_driver="yes"]
322 schoenebeck 18 )
323 schoenebeck 852 have_alsa=0
324     if test "$config_alsa_driver" = "yes"; then
325     AC_CHECK_HEADER(alsa/asoundlib.h,
326     AC_CHECK_LIB(asound, main,
327     have_alsa=1
328     ,
329     have_alsa=0
330     )
331     ,
332     have_alsa=0
333     )
334     if test "$have_alsa" = "1"; then
335     have_midi_input_driver="true"
336     have_audio_output_driver="true";
337     fi
338    
339     echo -n "checking Alsa version... "
340 persson 2365 AC_LANG_PUSH([C])
341     AC_RUN_IFELSE([AC_LANG_SOURCE([[
342 schoenebeck 852 #include <alsa/asoundlib.h>
343     void main(void) {
344     /* ensure backward compatibility */
345     #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
346     #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
347     #endif
348     exit(SND_LIB_MAJOR);
349     }
350 persson 2365 ]])],
351 schoenebeck 852 alsa_major=0,
352     alsa_major=$?,
353     alsa_major=0
354     )
355 persson 2365 AC_RUN_IFELSE([AC_LANG_SOURCE([[
356 schoenebeck 852 #include <alsa/asoundlib.h>
357     void main(void) {
358     /* ensure backward compatibility */
359     #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
360     #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
361     #endif
362     exit(SND_LIB_MINOR);
363     }
364 persson 2365 ]])],
365 schoenebeck 852 alsa_minor=0,
366     alsa_minor=$?,
367     alsa_minor=0
368     )
369 persson 2365 AC_RUN_IFELSE([AC_LANG_SOURCE([[
370 schoenebeck 852 #include <alsa/asoundlib.h>
371     void main(void) {
372     /* ensure backward compatibility */
373     #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
374     #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
375     #endif
376     exit(SND_LIB_SUBMINOR);
377     }
378 persson 2365 ]])],
379 schoenebeck 852 alsa_subminor=0,
380     alsa_subminor=$?,
381     alsa_subminor=0
382     )
383 persson 2365 AC_LANG_POP([C])
384 schoenebeck 852 echo "$alsa_major.$alsa_minor.$alsa_subminor";
385     AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
386     AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
387     AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
388     else
389     echo "ALSA support disabled by configure script parameter"
390 schoenebeck 18 fi
391 schoenebeck 291 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
392 schoenebeck 288 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
393 schoenebeck 1876 config_have_alsa="no"
394     if test $have_alsa = "1"; then
395     config_have_alsa="yes"
396     fi
397 schoenebeck 18
398 schoenebeck 852 # JACK
399     AC_ARG_ENABLE(jack-driver,
400     [ --disable-jack-driver
401     Disable support for the Jack Audio Connection Kit
402     (JACK).],
403 schoenebeck 1360 [config_jack_driver="$enableval"],
404 schoenebeck 852 [config_jack_driver="yes"]
405 schoenebeck 18 )
406 schoenebeck 852 have_jack=0
407     if test "$config_jack_driver" = "yes"; then
408     PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
409     if test $have_jack = "1"; then
410     AC_SUBST(JACK_LIBS)
411     AC_SUBST(JACK_CFLAGS)
412 persson 1748 linuxsampler_save_LIBS=$LIBS
413     LIBS="$JACK_LIBS $LIBS"
414 persson 2478 AC_CHECK_FUNCS(jack_client_name_size jack_client_open \
415     jack_on_info_shutdown)
416 persson 1748 LIBS=$linuxsampler_save_LIBS
417 schoenebeck 852 have_audio_output_driver="true";
418     fi
419 schoenebeck 33 else
420 schoenebeck 852 echo "JACK support disabled by configure script parameter"
421 schoenebeck 33 fi
422 schoenebeck 852 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
423     AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
424 schoenebeck 1876 config_have_jack="no"
425     if test $have_jack = "1"; then
426     config_have_jack="yes"
427     fi
428 schoenebeck 31
429 persson 1651 # JACK MIDI
430     have_jack_midi=0
431     if test $have_jack = "1"; then
432 persson 1652 linuxsampler_save_CFLAGS=$CFLAGS
433     linuxsampler_save_LIBS=$LIBS
434     CFLAGS="$JACK_CFLAGS $CFLAGS"
435     LIBS="$JACK_LIBS $LIBS"
436     AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
437     if test $have_jack_midi = "1"; then
438     AC_CHECK_FUNCS(jack_midi_get_event_count)
439     AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
440     jack_midi_clear_buffer(0, 0);
441     ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
442     [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
443     have_midi_input_driver="true"
444     fi
445     CFLAGS=$linuxsampler_save_CFLAGS
446     LIBS=$linuxsampler_save_LIBS
447 persson 1651 fi
448     AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
449     AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
450     [Define to 1 if you have JACK with MIDI support installed.])
451 schoenebeck 1876 config_have_jack_midi="no"
452     if test $have_jack_midi = "1"; then
453     config_have_jack_midi="yes"
454     fi
455 persson 1651
456 schoenebeck 838 # ARTS
457 schoenebeck 852 AC_ARG_ENABLE(arts-driver,
458     [ --disable-arts-driver
459     Disable support for the Analogue Realtime System
460     (aRts).],
461 schoenebeck 1360 [config_arts_driver="$enableval"],
462 schoenebeck 852 [config_arts_driver="yes"]
463     )
464     have_arts=0
465     if test "$config_arts_driver" = "yes"; then
466     m4_ifdef([m4_include(m4/arts.m4)],,
467     [sinclude([m4/arts.m4])])
468     AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
469     if test "$have_arts" = "1"; then
470     have_audio_output_driver="true"
471     fi
472     else
473     echo "ARTS support disabled by configure script parameter"
474 schoenebeck 838 fi
475     AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
476     AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
477 schoenebeck 1876 config_have_arts="no"
478     if test $have_arts = "1"; then
479     config_have_arts="yes"
480     fi
481 schoenebeck 838
482 senoner 1502 # ASIO AUDIO (Win32)
483     AC_ARG_ENABLE(asiosdk-dir,
484     [ --enable-asiosdk-dir
485     Directory where the ASIO SDK is located, this automatically
486     enables the compilation of the ASIO audio output driver.],
487     [config_asiosdk_dir="${enableval}"],
488     [config_asiosdk_dir="."]
489     )
490     AC_SUBST(config_asiosdk_dir)
491    
492     AC_ARG_ENABLE(asio-driver,
493     [ --disable-asio-driver
494     Disable support for the Windows ASIO driver.],
495     [config_asio_driver="$enableval"],
496     [config_asio_driver="yes"]
497     )
498     have_asio=0
499     ASIOSDK_BASEDIR=
500     if test "$config_asio_driver" = "yes"; then
501     asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
502     echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
503     if test -e $asiosdk_headerfile ; then
504     echo yes
505     have_asio=1
506     ASIOSDK_BASEDIR="$config_asiosdk_dir"
507     else
508     echo no
509     have_asio=0
510     fi
511     if test "$have_asio" = "1"; then
512     have_audio_output_driver="true"
513     fi
514     else
515     echo "Windows ASIO support disabled by configure script parameter"
516     fi
517     AC_SUBST(ASIOSDK_BASEDIR)
518     AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
519     AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
520 schoenebeck 1876 config_have_asio="no"
521     if test $have_asio = "1"; then
522     config_have_asio="yes"
523     fi
524 senoner 1502
525 schoenebeck 609 # MidiShare (Linux, OS X, Windows)
526 schoenebeck 852 AC_ARG_ENABLE(midishare-driver,
527     [ --disable-midishare-driver
528     Disable support for the MidiShare system.],
529 schoenebeck 1360 [config_midishare_driver="$enableval"],
530 schoenebeck 852 [config_midishare_driver="yes"]
531 schoenebeck 609 )
532 schoenebeck 852 have_midishare=0
533     if test "$config_midishare_driver" = "yes"; then
534     AC_CHECK_HEADER(MidiShare.h,
535     AC_CHECK_LIB(MidiShare, MidiCountEvs,
536     have_midishare=1,
537     have_midishare=0
538     )
539     ,
540     have_midishare=0
541     )
542     if test "$have_midishare" = "1"; then
543     have_midi_input_driver="true"
544     fi
545     else
546     echo "MidiShare support disabled by configure script parameter"
547 schoenebeck 609 fi
548     AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
549     AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
550 schoenebeck 1876 config_have_midishare="no"
551     if test $have_midishare = "1"; then
552     config_have_midishare="yes"
553     fi
554 schoenebeck 609
555     # CoreMIDI (OS X)
556 schoenebeck 852 AC_ARG_ENABLE(coremidi-driver,
557     [ --disable-coremidi-driver
558     Disable support for the Apple CoreMIDI system.],
559 schoenebeck 1360 [config_coremidi_driver="$enableval"],
560 schoenebeck 852 [config_coremidi_driver="yes"]
561 schoenebeck 609 )
562 schoenebeck 852 have_coremidi=0
563     if test "$config_coremidi_driver" = "yes"; then
564     AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
565     have_coremidi=1,
566     have_coremidi=0
567     )
568     if test "$have_coremidi" = "1"; then
569     have_midi_input_driver="true"
570     fi
571     else
572     echo "CoreMIDI support disabled by configure script parameter"
573 schoenebeck 609 fi
574     AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
575     AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
576 schoenebeck 1876 config_have_coremidi="no"
577     if test $have_coremidi = "1"; then
578     config_have_coremidi="yes"
579     fi
580 schoenebeck 609
581 iliev 1829 # CoreAudio (OS X)
582     AC_ARG_ENABLE(coreaudio-driver,
583     [ --disable-coreaudio-driver
584     Disable support for the Apple CoreAudio system.],
585     [config_coreaudio_driver="$enableval"],
586     [config_coreaudio_driver="yes"]
587     )
588     have_coreaudio=0
589     if test "$config_coreaudio_driver" = "yes"; then
590     AC_CHECK_HEADER(CoreAudio/CoreAudio.h,
591     have_coreaudio=1,
592     have_coreaudio=0
593     )
594     if test "$have_coreaudio" = "1"; then
595     have_audio_output_driver="true"
596     fi
597     else
598     echo "CoreAudio support disabled by configure script parameter"
599     fi
600     AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1")
601     AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.])
602 schoenebeck 1876 config_have_coreaudio="no"
603     if test $have_coreaudio = "1"; then
604     config_have_coreaudio="yes"
605     fi
606 iliev 1829
607 senoner 1502 # MME MIDI (Win32)
608     AC_ARG_ENABLE(mmemidi-driver,
609     [ --disable-mmemidi-driver
610     Disable support for the Windows MME MIDI system.],
611     [config_mmemidi_driver="$enableval"],
612     [config_mmemidi_driver="yes"]
613     )
614     have_mmemidi=0
615     if test "$config_mmemidi_driver" = "yes"; then
616     AC_CHECK_HEADERS(mmsystem.h,
617     have_mmemidi=1,
618     have_mmemidi=0
619     )
620     if test "$have_mmemidi" = "1"; then
621     have_midi_input_driver="true"
622     fi
623     else
624     echo "MME MIDI support disabled by configure script parameter"
625     fi
626     AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
627     AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
628 schoenebeck 1876 config_have_mme="no"
629     if test $have_mmemidi = "1"; then
630     config_have_mme="yes"
631     fi
632 senoner 1502
633 persson 1777 # DSSI
634     AC_CHECK_HEADERS(dssi.h,
635 schoenebeck 1876 config_have_dssi="yes",
636     config_have_dssi="no")
637     AM_CONDITIONAL(HAVE_DSSI, test $config_have_dssi = "yes")
638 persson 1777
639     # LV2
640 persson 2356 PKG_CHECK_MODULES(LV2, lv2 >= 1.0.0, config_have_lv2="yes", config_have_lv2="no")
641 schoenebeck 2787 if test "$config_have_lv2" != "yes"; then
642     PKG_CHECK_MODULES(LV2, lv2core >= 1.0.0, config_have_lv2="yes", config_have_lv2="no")
643     fi
644 persson 2343 AC_SUBST(LV2_CFLAGS)
645     AC_SUBST(LV2_LIBS)
646 schoenebeck 1876 AM_CONDITIONAL(HAVE_LV2, test $config_have_lv2 = "yes")
647 persson 1777
648     # VST
649     AC_ARG_ENABLE(vstsdk-dir,
650     [ --enable-vstsdk-dir
651     Directory where the VST SDK is located.
652     This automatically enables the compilation
653     of the VST plugin.],
654     [VSTSDK_DIR="${enableval}"],
655     [VSTSDK_DIR=]
656     )
657     AC_SUBST(VSTSDK_DIR)
658     AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
659 schoenebeck 1876 config_have_vst="no"
660     if test "x$VSTSDK_DIR" != "x"; then
661     config_have_vst="yes"
662     fi
663 persson 1777
664 iliev 1846 # AU
665     AC_CHECK_HEADERS(AudioUnit/AudioUnit.h,
666 schoenebeck 1876 config_have_au="yes",
667     config_have_au="no")
668     AM_CONDITIONAL(HAVE_AU, test $config_have_au = "yes")
669 iliev 1855 AM_CONDITIONAL(HAVE_AUFLAGS, test "$AUFLAGS" != "")
670 persson 1777
671 persson 2183 if test $config_have_au = "yes" ; then
672     if test "x$DEVELOPER_EXTRAS_DIR" = "x" ; then
673     if test -d /Developer/Extras ; then
674     DEVELOPER_EXTRAS_DIR=/Developer/Extras
675     else
676     DEVELOPER_EXTRAS_DIR=/Developer/Examples
677     fi
678     fi
679     AC_SUBST(DEVELOPER_EXTRAS_DIR)
680     fi
681 iliev 1846
682 persson 2203 if test "x$MAC_PLUGIN_INSTALL_DIR" = "x" ; then
683     MAC_PLUGIN_INSTALL_DIR=/Library/Audio/Plug-Ins
684     fi
685     AC_SUBST(MAC_PLUGIN_INSTALL_DIR)
686    
687 schoenebeck 1364 # have we found at least one MIDI input and one audio output driver ?
688     if test "$have_midi_input_driver" = "false"; then
689     echo "No supported MIDI input system found!"
690     echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
691 persson 1652 echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
692 schoenebeck 1364 echo "If you think you have one of those available on your system, make sure you"
693     echo "also have the respective development (header) files installed."
694     exit -1;
695     fi
696     if test "$have_audio_output_driver" = "false"; then
697     echo "No supported audio output system found!"
698 persson 1652 echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
699 schoenebeck 1364 echo "driver at the moment!"
700     exit -1;
701     fi
702    
703    
704    
705     ###########################################################################
706     # Checks for various DLL libraries
707    
708 schoenebeck 504 # Check presence of libgig
709 schoenebeck 3537 libgig_version="4.2.0"
710 schoenebeck 504 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
711     if test "$HAVE_GIG" = "false"; then
712     echo "Required libgig version not found!"
713     echo "You need to have libgig version ${libgig_version} installed!"
714     exit -1;
715 schoenebeck 714 else
716     echo "yes, found libgig $libgig_version"
717 schoenebeck 504 fi
718     AC_SUBST(GIG_CFLAGS)
719     AC_SUBST(GIG_LIBS)
720    
721 iliev 2018 # SF2 Engine (requires libgig)
722 iliev 2012 AC_ARG_ENABLE(sf2-engine,
723     [ --disable-sf2-engine
724     Disable compilation of the SF2 engine.
725 iliev 2018 You need to have libgig installed.],
726 iliev 2012 [config_sf2_engine="$enableval"],
727     [config_sf2_engine="yes"]
728     )
729     HAVE_SF2=0;
730     if test "$config_sf2_engine" = "yes"; then
731 iliev 2018 HAVE_SF2=1
732 iliev 2012 else
733     echo "SF2 engine disabled by configure script parameter"
734     fi
735     AM_CONDITIONAL(HAVE_SF2, test $HAVE_SF2 = 1)
736     AC_DEFINE_UNQUOTED(HAVE_SF2,$HAVE_SF2,[Define to 1 if you want SF2 engine and have libsf2 installed.])
737     config_have_sf2="no"
738     if test $HAVE_SF2 = "1"; then
739     config_have_sf2="yes"
740     fi
741    
742     # Check presence of libsndfile
743     libsndfile_version="1.0"
744     PKG_CHECK_MODULES(SNDFILE, sndfile >= $libsndfile_version, HAVE_SNDFILE=true, HAVE_SNDFILE=false)
745     if test "$HAVE_SNDFILE" = "false"; then
746     echo "Required libsndfile version not found!"
747     echo "You need to have libsndfile version ${libsndfile_version} installed!"
748     exit -1;
749     else
750     echo "yes, found libsndfile $libsndfile_version"
751     fi
752     AC_SUBST(SNDFILE_CFLAGS)
753     AC_SUBST(SNDFILE_LIBS)
754    
755 persson 2399 # Check for Vorbis and FLAC support in libsndfile
756 persson 2119 linuxsampler_save_CFLAGS=$CFLAGS
757     CFLAGS="$SNDFILE_CFLAGS $CFLAGS"
758 persson 2399 AC_CHECK_DECLS([SF_FORMAT_VORBIS, SF_FORMAT_FLAC], [], [], [[#include <sndfile.h>]])
759 persson 2167
760     # Check for loop functionality in libsndfile
761     AC_CHECK_MEMBERS([SF_INSTRUMENT.loops],,
762     [AC_MSG_WARN([Your version of libsndfile does not support
763     reading of loop information. LinuxSampler will not be able to
764     extract loop information from sample files.])],
765     [#include <sndfile.h>])
766 persson 2119 CFLAGS=$linuxsampler_save_CFLAGS
767    
768 schoenebeck 1364 # Instruments DB feature (requires SQLite 3.3)
769     AC_ARG_ENABLE(instruments-db,
770     [ --disable-instruments-db
771     Disable compilation of the sampler's instruments
772     database feature. You need to have SQLite 3.3
773     or younger installed for this feature.],
774     [config_instruments_db="$enableval"],
775     [config_instruments_db="yes"]
776     )
777     HAVE_SQLITE3=0;
778     if test "$config_instruments_db" = "yes"; then
779     # Check presence of sqlite3
780     sqlite_version="3.3"
781     PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
782     AC_SUBST(SQLITE3_LIBS)
783     AC_SUBST(SQLITE3_CFLAGS)
784     if test $HAVE_SQLITE3 = false; then
785     HAVE_SQLITE3=0
786     config_instruments_db="no"
787     echo "*** Required sqlite version not found!"
788     echo "*** You need to have sqlite version ${sqlite_version} or higher"
789     echo "*** for instruments database support to be enabled."
790     echo "*** Support for instruments DB will be disabled!"
791     else
792     HAVE_SQLITE3=1
793     fi
794 senkov 397 else
795 schoenebeck 1364 echo "Instruments DB feature disabled by configure script parameter"
796 senkov 397 fi
797     AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
798 schoenebeck 1364 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
799 schoenebeck 31
800 schoenebeck 288
801    
802 schoenebeck 554 ###########################################################################
803     # Handle Configuration Options
804    
805     # TODO: should we use AC_ARG_VAR(variable, description) instead?
806    
807 schoenebeck 617 AC_ARG_ENABLE(asm,
808 schoenebeck 1259 [ --disable-asm
809 schoenebeck 738 Enable hand-crafted assembly optimizations
810 schoenebeck 1259 (default=on). LinuxSampler provides CPU specific
811     assembly optimizations. This is currently limited
812     to just enter a fast (denormal) FPU mode on x86
813     platforms. There are currently no synthesis core
814     assembly optimizations anymore since LS 0.4.0],
815 schoenebeck 1360 [config_asm="$enableval"],
816 schoenebeck 1259 [config_asm="yes"]
817 schoenebeck 617 )
818     if test "$config_asm" = "yes"; then
819 schoenebeck 1259 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
820 schoenebeck 617 fi
821    
822 schoenebeck 554 AC_ARG_ENABLE(dev-mode,
823 schoenebeck 1424 [ --enable-dev-mode
824     Enable development mode (default=off). In that mode
825 schoenebeck 554 we do some extra sanity checks here and there.
826     This helps to spot possible problems, but reduces
827     efficiency a bit],
828 schoenebeck 1360 [config_dev_mode="$enableval"],
829 schoenebeck 1424 [config_dev_mode="no"]
830 schoenebeck 554 )
831     if test "$config_dev_mode" = "yes"; then
832     AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
833     fi
834    
835     AC_ARG_ENABLE(debug-level,
836     [ --enable-debug-level
837     Specify verbosity of console messages (default=1).
838     The higher the value, the higher will be verbosity.
839     A value of 0 means no console output at all.
840     There's not really an upper limit but the usual
841     level of all messages is currently somewhere less
842     than 10.],
843     [config_debug_level="${enableval}"],
844     [config_debug_level="1"]
845     )
846     AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
847    
848     AC_ARG_ENABLE(rt-exceptions,
849     [ --enable-rt-exceptions
850     Enable exceptions in the realtime thread
851     (default=no). If this is enabled, exceptions will
852     be thrown on critical errors in the realtime
853     context as well. Otherwise if disabled
854     segmentation faults will be forced by the
855     application on critical errors.],
856 schoenebeck 1360 [config_rt_exceptions="$enableval"],
857 schoenebeck 554 [config_rt_exceptions="no"]
858     )
859     if test "$config_rt_exceptions" = "yes"; then
860     AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
861     fi
862    
863 schoenebeck 3764 AC_CHECK_FUNC(pthread_testcancel,
864     [config_pthread_testcancel="yes"],
865     [config_pthread_testcancel="no"]
866     )
867 nagata 1649 if test "$config_pthread_testcancel" = "yes"; then
868 schoenebeck 3764 AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 if pthread_testcancel() is available.])
869 nagata 1649 fi
870    
871 schoenebeck 554 AC_ARG_ENABLE(preload-samples,
872     [ --enable-preload-samples
873     Due to seeking and latency issues with hard drives
874     we have to cache a small part of samples' head in
875     RAM (default=32768). The higher this value the
876     more memory will be occupied for each sample, but
877     the safer this will be in regards of possible
878     droputs. A 'good' value depends on the running
879     system and usage dependant factors.],
880     [config_preload_samples="${enableval}"],
881     [config_preload_samples="32768"]
882     )
883     AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
884    
885     AC_ARG_ENABLE(max-pitch,
886     [ --enable-max-pitch
887     Specify the maximum allowed pitch value in octaves
888     (default=4). To lower memory usage you might want
889     set a smaller value.],
890     [config_max_pitch="${enableval}"],
891     [config_max_pitch="4"]
892     )
893     AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
894    
895     AC_ARG_ENABLE(max-events,
896     [ --enable-max-events
897     Specify the maximum allowed amount of events to be
898     processed per fragment (default=1024).],
899     [config_max_events="${enableval}"],
900     [config_max_events="1024"]
901     )
902     AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
903    
904     AC_ARG_ENABLE(eg-bottom,
905     [ --enable-eg-bottom
906     Bottom limit of envelope generators
907     (default=0.001). Certain kinds of curve types like
908     exponential curves converge against 0 but never
909     reach 0. So we have to define a certain low value
910     after which we should consider all smaller values
911     to be 'almost zero'. The smaller this value, the
912     longer will voices survive in EG's release stage
913     and thus waste voices. If this value is too high
914     will cause click sounds though.],
915     [config_eg_bottom="${enableval}"],
916     [config_eg_bottom="0.001"]
917     )
918     AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
919    
920     AC_ARG_ENABLE(eg-min-release-time,
921     [ --enable-eg-min-release-time
922     Specify the lowest allowed release time in seconds
923     (default=0.0025). This value will also be used to
924     ramp down voices on voice stealing. This value
925     should always be less than the period time of the
926     used audio driver, as in case of voice stealing
927     the killed voice needs to be completely ramped
928     down in the same fragment.],
929     [config_eg_min_release_time="${enableval}"],
930     [config_eg_min_release_time="0.0025"]
931     )
932     AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
933    
934     AC_ARG_ENABLE(refill-streams,
935     [ --enable-refill-streams
936     Number of streams that should be refilled in each
937     disk thread cycle (default=4).],
938     [config_refill_streams="${enableval}"],
939     [config_refill_streams="4"]
940     )
941     AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
942    
943     AC_ARG_ENABLE(stream-min-refill,
944     [ --enable-stream-min-refill
945     Minimum refill size for disk streams (default=1024).
946     The disk thread will go to sleep for a while if no
947     stream had to be refilled more than this value in
948     a disk thread cycle.],
949     [config_stream_min_refill="${enableval}"],
950     [config_stream_min_refill="1024"]
951     )
952     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
953    
954     AC_ARG_ENABLE(stream-max-refill,
955     [ --enable-stream-max-refill
956     Maximum refill size for disk streams
957     (default=65536). The disk thread will refill
958     each stream only by a size of this value per
959     disk thread cycle.],
960     [config_stream_max_refill="${enableval}"],
961     [config_stream_max_refill="65536"]
962     )
963     AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
964    
965     AC_ARG_ENABLE(stream-size,
966     [ --enable-stream-size
967     Size of each stream's ring buffer in sample points
968     (default=262144).],
969     [config_stream_size="${enableval}"],
970     [config_stream_size="262144"]
971     )
972     AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
973    
974     AC_ARG_ENABLE(max-streams,
975     [ --enable-max-streams
976 schoenebeck 1800 Initial maximum amount of disk streams
977     (default=90). This value can be changed at
978     runtime. It should always be higher than the
979     maximum amount of voices.],
980 schoenebeck 554 [config_max_streams="${enableval}"],
981     [config_max_streams="90"]
982     )
983 schoenebeck 1800 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
984 schoenebeck 554
985     AC_ARG_ENABLE(max-voices,
986     [ --enable-max-voices
987 schoenebeck 1800 Initial maximum amount of voices (default=64).
988     This value can be changed at runtime. It should
989     always be lower than the maximum amount of disk
990     streams.],
991 schoenebeck 554 [config_max_voices="${enableval}"],
992     [config_max_voices="64"]
993     )
994 schoenebeck 1800 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
995 schoenebeck 554
996 schoenebeck 738 AC_ARG_ENABLE(subfragment-size,
997     [ --enable-subfragment-size
998     Every audio fragment will be splitted into
999     subfragments. Where each subfragment renders
1000     audio with constant synthesis parameters. This is
1001     done for efficiency reasons. This parameter
1002     defines the default size of a subfragment in
1003     sample points. A large value means less CPU time
1004     whereas a low value means better audio quality
1005     (default=32).],
1006     [config_subfragment_size="${enableval}"],
1007     [config_subfragment_size="32"]
1008     )
1009     AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
1010    
1011 schoenebeck 1005 AC_ARG_ENABLE(global-attenuation-default,
1012     [ --enable-global-attenuation-default
1013 schoenebeck 781 To prevent clipping all samples will be lowered
1014 schoenebeck 1005 in amplitude by this given default factor (can
1015     be overridden at runtime).
1016 schoenebeck 781 (default=0.35)],
1017 schoenebeck 1005 [config_global_attenuation_default="${enableval}"],
1018     [config_global_attenuation_default="0.35"]
1019 schoenebeck 781 )
1020 schoenebeck 1005 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
1021 schoenebeck 781
1022 schoenebeck 554 AC_ARG_ENABLE(voice-steal-algo,
1023     [ --enable-voice-steal-algo
1024     Voice stealing algorithm to be used. Currently
1025     available options:
1026     none:
1027     Disable voice stealing completely.
1028 schoenebeck 563 oldestvoiceonkey (default):
1029 schoenebeck 554 Try to kill a voice on the same key first,
1030     if no success, proceed with the oldest key.
1031 schoenebeck 563 oldestkey:
1032 schoenebeck 554 Try to kill a voice from the oldest active
1033     key.],
1034     [ if test ! "(" "${enableval}" = "none" \
1035     -o "${enableval}" = "oldestvoiceonkey" \
1036     -o "${enableval}" = "oldestkey" ")" ; then
1037     AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
1038     else
1039     config_voice_steal_algo="${enableval}"
1040 schoenebeck 579 fi
1041 schoenebeck 554 ],
1042 schoenebeck 563 [config_voice_steal_algo="oldestvoiceonkey"]
1043 schoenebeck 554 )
1044     AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
1045    
1046     AC_ARG_ENABLE(sysex-buffer-size,
1047     [ --enable-sysex-buffer-size
1048     System Exclusive Message buffer size in kB
1049     (default=2048).],
1050     [config_sysex_buffer_size="${enableval}"],
1051     [config_sysex_buffer_size="2048"]
1052     )
1053     AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
1054    
1055     AC_ARG_ENABLE(force-filter,
1056     [ --enable-force-filter
1057     If enabled will force filter to be used even if
1058     no usage was define in instrument patch files.
1059     (default=no).],
1060 schoenebeck 1360 [config_force_filter="$enableval"],
1061 schoenebeck 554 [config_force_filter="no"]
1062     )
1063     if test "$config_force_filter" = "yes"; then
1064     AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
1065     fi
1066    
1067     AC_ARG_ENABLE(filter-cutoff-min,
1068     [ --enable-filter-cutoff-min
1069     Minimum filter cutoff frequency in Hz
1070     (default=100.0).],
1071     [config_filter_cutoff_min="${enableval}"],
1072     [config_filter_cutoff_min="100.0"]
1073     )
1074     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
1075    
1076     AC_ARG_ENABLE(filter-cutoff-max,
1077     [ --enable-filter-cutoff-max
1078     Maximum filter cutoff frequency in Hz
1079     (default=10000.0).],
1080     [config_filter_cutoff_max="${enableval}"],
1081     [config_filter_cutoff_max="10000.0"]
1082     )
1083     AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
1084    
1085     AC_ARG_ENABLE(override-cutoff-ctrl,
1086     [ --enable-override-cutoff-ctrl
1087     Override filter cutoff MIDI controller (default=no).
1088     Note: you have to define the MIDI controller number
1089     here, it's not a boolean parameter type! If this
1090     option is used, controller number given by
1091     instrument patch will be ignored and instead this
1092     supplied value will be used.],
1093     [config_override_cutoff_ctrl="${enableval}"],
1094     [config_override_cutoff_ctrl="no"]
1095     )
1096     if test ! "$config_override_cutoff_ctrl" = "no"; then
1097     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
1098     fi
1099    
1100     AC_ARG_ENABLE(override-resonance-ctrl,
1101     [ --enable-override-resonance-ctrl
1102     Override filter resonance MIDI controller
1103     (default=no). Note: you have to define the MIDI
1104     controller number here, it's not a boolean
1105     parameter type! If this option is used, controller
1106     number given by instrument patch will be ignored
1107     and instead this supplied value will be used.],
1108     [config_override_resonance_ctrl="${enableval}"],
1109     [config_override_resonance_ctrl="no"]
1110     )
1111     if test ! "$config_override_resonance_ctrl" = "no"; then
1112     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
1113     fi
1114    
1115     AC_ARG_ENABLE(override-filter-type,
1116     [ --enable-override-filter-type
1117     Override filter type (default=no). Options:
1118     hp: for highpass
1119     bp: for bandpass
1120     br: for bandreject
1121     lp: for lowpass
1122     lpt: for lowpass turbo],
1123     [ if test "${enableval}" = "hp" ; then
1124     config_override_filter_type="::gig::vcf_type_highpass"
1125     elif test "${enableval}" = "bp" ; then
1126     config_override_filter_type="::gig::vcf_type_bandpass"
1127     elif test "${enableval}" = "br" ; then
1128     config_override_filter_type="::gig::vcf_type_bandreject"
1129     elif test "${enableval}" = "lp" ; then
1130     config_override_filter_type="::gig::vcf_type_lowpass"
1131     elif test "${enableval}" = "lpt" ; then
1132     config_override_filter_type="::gig::vcf_type_lowpassturbo"
1133     elif test ! "${enableval}" = "no"; then
1134     AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
1135 schoenebeck 579 fi
1136 schoenebeck 554 ],
1137     [config_override_filter_type="no"]
1138     )
1139     if test ! "$config_override_filter_type" = "no"; then
1140     AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
1141     fi
1142    
1143 schoenebeck 563 AC_ARG_ENABLE(gs-checksum,
1144     [ --enable-gs-checksum
1145     Enable Roland General Synth SysEx checksum check
1146     (default=no). If this is enabled, all GS SysEx
1147     messages which do not provide a correct checksum
1148     will be ignored. This is disabled by default as
1149     not all devices honor GS checksums.],
1150 schoenebeck 1360 [config_assert_gs_sysex_checksum="$enableval"],
1151 schoenebeck 563 [config_assert_gs_sysex_checksum="no"]
1152     )
1153     if test "config_assert_gs_sysex_checksum" = "yes"; then
1154     AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
1155     fi
1156    
1157 schoenebeck 829 AC_ARG_ENABLE(portamento-time-min,
1158     [ --enable-portamento-time-min
1159     Minimum Portamento time in seconds
1160     (default=0.1).],
1161     [config_portamento_time_min="${enableval}"],
1162     [config_portamento_time_min="0.1"]
1163     )
1164     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
1165    
1166     AC_ARG_ENABLE(portamento-time-max,
1167     [ --enable-portamento-time-max
1168     Maximum Portamento time in seconds
1169     (default=32).],
1170     [config_portamento_time_max="${enableval}"],
1171     [config_portamento_time_max="32"]
1172     )
1173     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
1174    
1175     AC_ARG_ENABLE(portamento-time-default,
1176     [ --enable-portamento-time-default
1177     Default Portamento time in seconds
1178     (default=1).],
1179     [config_portamento_time_default="${enableval}"],
1180     [config_portamento_time_default="1"]
1181     )
1182     AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
1183    
1184 schoenebeck 714 AC_ARG_ENABLE(signed-triang-algo,
1185     [ --enable-signed-triang-algo
1186     Signed triangular wave algorithm to be used (e.g. for LFOs).
1187     Currently available options:
1188     intmath:
1189     Uses integer math without any branch will then be
1190     converted to floating point value for each sample point.
1191     This int->float conversion might hurt on some systems.
1192 senkov 720 intmathabs:
1193     Similar to intmath but uses abs() function.
1194     Depending on compiler and platrofm this could
1195     perform better than integer math as it avoids
1196 schoenebeck 1360 an extra integer multiply instruction.
1197 schoenebeck 714 diharmonic:
1198     The triangular wave will be approximated by adding two
1199     sinusoidials. This solution might especially hurt on
1200     systems with weak floating point unit.
1201     benchmark (default):
1202     This is not an algorithm. Use this option if the
1203     appropriate algorithm should be automatically
1204     chosen by the configure script by performing a
1205     benchmark between the algorithms mentioned above.
1206     This will NOT work for cross compilation!],
1207     [ if test ! "(" "${enableval}" = "intmath" \
1208 senkov 720 -o "${enableval}" = "intmathabs" \
1209 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
1210     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
1211     else
1212     config_signed_triang_algo="${enableval}"
1213     fi
1214     ],
1215     [config_signed_triang_algo="benchmark"]
1216     )
1217 schoenebeck 563
1218 schoenebeck 714 AC_ARG_ENABLE(unsigned-triang-algo,
1219     [ --enable-unsigned-triang-algo
1220     Unsigned triangular wave algorithm to be used (e.g. for LFOs).
1221     Currently available options:
1222     intmath:
1223     Uses integer math without any branch will then be
1224     converted to floating point value for each sample point.
1225     This int->float conversion might hurt on some systems.
1226 senkov 720 intmathabs:
1227     Similar to intmath but uses abs() function.
1228     Depending on compiler and platrofm this could
1229     perform better than integer math as it avoids
1230 schoenebeck 1360 an extra integer multiply instruction.
1231 schoenebeck 714 diharmonic:
1232     The triangular wave will be approximated by adding two
1233     sinusoidials. This solution might especially hurt on
1234     systems with weak floating point unit.
1235     benchmark (default):
1236     This is not an algorithm. Use this option if the
1237     appropriate algorithm should be automatically
1238     chosen by the configure script by performing a
1239     benchmark between the algorithms mentioned above.
1240     This will NOT work for cross compilation!],
1241     [ if test ! "(" "${enableval}" = "intmath" \
1242 senkov 720 -o "${enableval}" = "intmathabs" \
1243 schoenebeck 714 -o "${enableval}" = "diharmonic" ")" ; then
1244     AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
1245     else
1246     config_unsigned_triang_algo="${enableval}"
1247     fi
1248     ],
1249     [config_unsigned_triang_algo="benchmark"]
1250     )
1251    
1252 iliev 716 AC_ARG_ENABLE(process-muted-channels,
1253     [ --enable-process-muted-channels
1254     Enable processing of muted channels (default=no).
1255     In that mode all MIDI events in the muted channels
1256     will be processed. This will provide information
1257     about the active voices in the muted channels and
1258     will not discard notes, triggered in mute mode,
1259     when the channel is unmuted. But also will reduce
1260     the efficiency.],
1261 schoenebeck 1360 [config_process_muted_channels="$enableval"],
1262 iliev 716 [config_process_muted_channels="no"]
1263     )
1264     if test "$config_process_muted_channels" = "yes"; then
1265     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
1266     fi
1267 schoenebeck 714
1268 schoenebeck 849 AC_ARG_ENABLE(process-all-notes-off,
1269     [ --disable-process-all-notes-off
1270     Disable interpretation of All-Notes-Off MIDI
1271     messages (default=on). By default LS will release
1272     all voices whenever it receives an All-Notes-Off
1273     MIDI message. You can disable this behavior, so
1274     that LS simply ignores such messages.],
1275 schoenebeck 1360 [config_process_all_notes_off="$enableval"],
1276 schoenebeck 849 [config_process_all_notes_off="yes"]
1277     )
1278     if test "$config_process_all_notes_off" = "yes"; then
1279     AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
1280     fi
1281    
1282 persson 830 AC_ARG_ENABLE(interpolate-volume,
1283     [ --disable-interpolate-volume
1284     Disable interpolation of volume modulation
1285     (default=on). With this enabled, the volume changes
1286     generated by for example the envelope generator
1287     will be smoother, minimizing the risk for audio
1288     clicks. Disable it to reduce CPU usage.],
1289 schoenebeck 1360 [config_interpolate_volume="$enableval"],
1290 persson 830 [config_interpolate_volume="yes"]
1291     )
1292     if test "$config_interpolate_volume" = "yes"; then
1293     AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
1294     fi
1295 iliev 716
1296 schoenebeck 1762 AC_ARG_ENABLE(master-volume-sysex-by-port,
1297     [ --enable-master-volume-sysex-by-port
1298     Whether global volume sysex message should be
1299     applied globally to the whole sampler or only to
1300     the sampler channels connected to the same MIDI
1301     input port on which the sysex message arrived on.
1302     By default global volume sysex messages apply
1303     globally to the whole sampler, since many MIDI
1304     devices behave that way.],
1305     [config_master_volume_sysex_by_port="$enableval"],
1306     [config_master_volume_sysex_by_port="no"]
1307     )
1308     if test "$config_master_volume_sysex_by_port" = "yes"; then
1309     AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
1310     fi
1311    
1312 schoenebeck 1212 AC_ARG_ENABLE(plugin-dir,
1313     [ --enable-plugin-dir
1314     Directory where the sampler shall look for potential plugins,
1315     that is 3rd party shared libraries that should be loaded by
1316     the sampler on startup. By default the sampler will search
1317     for plugins in the subdirectory "plugins" below its own
1318     library directory.
1319     (i.e. /usr/local/lib/linuxsampler/plugins)],
1320     [config_plugin_dir="${enableval}"],
1321     [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1322     )
1323     AC_SUBST(config_plugin_dir)
1324 persson 830
1325 schoenebeck 1364 AC_ARG_ENABLE(default-instruments-db-location,
1326     [ --enable-default-instruments-db-location
1327     Only when instruments DB feature is enabled: file name
1328     which shall be taken as default location of the
1329     instruments DB file. This location can still be
1330     overridden at runtime with a command line switch.
1331     (default: /var/lib/linuxsampler/instruments.db)],
1332     [config_default_instruments_db_file="${enableval}"],
1333     [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1334     )
1335     AC_DEFINE_UNQUOTED(
1336     CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1337     "$config_default_instruments_db_file",
1338     [Only when instruments DB feature is enabled: default location of the DB file.]
1339     )
1340 schoenebeck 1432 AC_SUBST(config_default_instruments_db_file)
1341 schoenebeck 1212
1342 schoenebeck 1364
1343 schoenebeck 554 ###########################################################################
1344 schoenebeck 714 # Automatic Benchmarks (to detect the best algorithms for the system)
1345    
1346     if test "$config_signed_triang_algo" = "benchmark"; then
1347     echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1348 persson 2365 AC_LANG_PUSH([C++])
1349     AC_RUN_IFELSE([AC_LANG_SOURCE([[
1350 schoenebeck 714 #define SIGNED 1
1351     #define SILENT 1
1352 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1353 persson 2365 ]])],
1354 schoenebeck 714 triang_signed=0,
1355     triang_signed=$?,
1356     triang_signed=0
1357     )
1358 persson 2365 AC_LANG_POP([C++])
1359 schoenebeck 714 if test "$triang_signed" = "2"; then
1360     config_signed_triang_algo="intmath"
1361     echo "integer math"
1362     elif test "$triang_signed" = "3"; then
1363     config_signed_triang_algo="diharmonic"
1364     echo "di harmonics"
1365 senkov 720 elif test "$triang_signed" = "5"; then
1366     config_signed_triang_algo="intmathabs"
1367     echo "integer math using abs()"
1368 schoenebeck 714 else
1369     echo "Benchmark of signed triangular wave algorithms failed!"
1370     echo "Maybe you are doing cross compilation? In that case you have to select"
1371     echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1372     echo "Call './configure --help' for further information or read configure.in."
1373     exit -1;
1374     fi
1375 schoenebeck 1165 else
1376     case "$config_signed_triang_algo" in
1377     intmath)
1378     triang_signed=2 ;;
1379     diharmonic)
1380     triang_signed=3 ;;
1381     intmathabs)
1382     triang_signed=5 ;;
1383     esac
1384 schoenebeck 714 fi
1385 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1386 schoenebeck 714
1387     if test "$config_unsigned_triang_algo" = "benchmark"; then
1388     echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1389 persson 2365 AC_LANG_PUSH([C++])
1390     AC_RUN_IFELSE([AC_LANG_SOURCE([[
1391 schoenebeck 714 #define SIGNED 0
1392     #define SILENT 1
1393 schoenebeck 738 #include "${srcdir}/benchmarks/triang.cpp"
1394 persson 2365 ]])],
1395 schoenebeck 714 triang_unsigned=0,
1396     triang_unsigned=$?,
1397     triang_unsigned=0
1398     )
1399 persson 2365 AC_LANG_POP([C++])
1400 schoenebeck 714 if test "$triang_unsigned" = "2"; then
1401     config_unsigned_triang_algo="intmath"
1402     echo "integer math"
1403     elif test "$triang_unsigned" = "3"; then
1404     config_unsigned_triang_algo="diharmonic"
1405     echo "di harmonics"
1406 senkov 720 elif test "$triang_unsigned" = "5"; then
1407 schoenebeck 726 config_unsigned_triang_algo="intmathabs"
1408 senkov 720 echo "integer math using abs()"
1409 schoenebeck 714 else
1410     echo "Benchmark of unsigned triangular wave algorithms failed!"
1411     echo "Maybe you are doing cross compilation? In that case you have to select"
1412     echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1413     echo "Call './configure --help' for further information or read configure.in."
1414     exit -1;
1415     fi
1416 schoenebeck 1165 else
1417     case "$config_unsigned_triang_algo" in
1418     intmath)
1419     triang_unsigned=2 ;;
1420     diharmonic)
1421     triang_unsigned=3 ;;
1422     intmathabs)
1423     triang_unsigned=5 ;;
1424     esac
1425 schoenebeck 714 fi
1426 schoenebeck 738 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1427 schoenebeck 714
1428    
1429     ###########################################################################
1430 schoenebeck 554 # Create Build Files
1431    
1432 persson 2365 AC_CONFIG_HEADERS([config.h])
1433 schoenebeck 9
1434 persson 2365 AC_LANG([C++])
1435 persson 497
1436     # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1437     # this, the dlfcn.h check in am_prog_libtool may fail.
1438     AC_CHECK_HEADER(stdlib.h)
1439    
1440 persson 2365 AC_CONFIG_FILES([\
1441 schoenebeck 654 Makefile \
1442     man/Makefile \
1443     man/linuxsampler.1 \
1444 schoenebeck 2515 man/lscp.1 \
1445 schoenebeck 654 src/Makefile \
1446 iliev 1161 src/db/Makefile \
1447 schoenebeck 654 src/network/Makefile \
1448     src/engines/Makefile \
1449     src/engines/gig/Makefile \
1450 iliev 2012 src/engines/sf2/Makefile \
1451     src/engines/sfz/Makefile \
1452 schoenebeck 654 src/engines/common/Makefile \
1453 schoenebeck 1722 src/effects/Makefile \
1454 schoenebeck 1321 src/common/Makefile \
1455 schoenebeck 654 src/testcases/Makefile \
1456     src/drivers/Makefile \
1457     src/drivers/audio/Makefile \
1458     src/drivers/midi/Makefile \
1459 schoenebeck 1375 src/plugins/Makefile \
1460 persson 1777 src/hostplugins/Makefile \
1461     src/hostplugins/dssi/Makefile \
1462     src/hostplugins/lv2/Makefile \
1463 persson 2360 src/hostplugins/lv2/manifest.ttl \
1464 persson 1777 src/hostplugins/vst/Makefile \
1465 iliev 1846 src/hostplugins/au/Makefile \
1466 schoenebeck 2581 src/scriptvm/Makefile \
1467 schoenebeck 2885 src/scriptvm/editor/Makefile \
1468 schoenebeck 2515 src/shell/Makefile \
1469 schoenebeck 654 linuxsampler.spec \
1470     debian/Makefile \
1471     Artwork/Makefile \
1472     scripts/Makefile \
1473     osx/Makefile \
1474 schoenebeck 1175 osx/linuxsampler.xcodeproj/Makefile \
1475 schoenebeck 654 Documentation/Makefile \
1476     Documentation/Engines/Makefile \
1477     Documentation/Engines/gig/Makefile \
1478 schoenebeck 697 linuxsampler.pc \
1479     Doxyfile \
1480 persson 2365 ])
1481     AC_OUTPUT
1482 schoenebeck 554
1483 schoenebeck 1212 # resolve all nested variables in '${config_plugin_dir}'
1484     # (merely for providing a human readable summary below)
1485     while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1486     config_plugin_dir=`eval echo ${config_plugin_dir}`
1487     done
1488 schoenebeck 554
1489 schoenebeck 1212
1490 schoenebeck 554 ###########################################################################
1491     # Output All Configuration Options
1492    
1493     echo ""
1494     echo "#####################################################################"
1495     echo "# LinuxSampler Configuration #"
1496     echo "#-------------------------------------------------------------------#"
1497 persson 2365 echo "# Release Version: ${VERSION}"
1498 schoenebeck 1876 echo "# LSCP Version: ${LSCP_RELEASE_MAJOR}.${LSCP_RELEASE_MINOR}"
1499     echo "#-------------------------------------------------------------------"
1500 schoenebeck 617 echo "# Assembly Optimizations: ${config_asm}"
1501 schoenebeck 554 echo "# Development Mode: ${config_dev_mode}"
1502     echo "# Debug Level: ${config_debug_level}"
1503     echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1504     echo "# Preload Samples: ${config_preload_samples}"
1505     echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1506     echo "# Maximum Events: ${config_max_events}"
1507     echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1508     echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1509     echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1510     echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1511     echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1512     echo "# Stream Size: ${config_stream_size}"
1513 schoenebeck 1800 echo "# Default Maximum Disk Streams: ${config_max_streams}"
1514     echo "# Default Maximum Voices: ${config_max_voices}"
1515 schoenebeck 738 echo "# Default Subfragment Size: ${config_subfragment_size}"
1516 schoenebeck 1005 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1517 schoenebeck 563 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1518 schoenebeck 714 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1519     echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1520 schoenebeck 554 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1521 schoenebeck 829 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1522     echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1523     echo "# Default Portamento Time: ${config_portamento_time_default} s"
1524 schoenebeck 554 echo "# Force Filter Usage: ${config_force_filter}"
1525     echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1526     echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1527     echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1528     echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1529     echo "# Override Filter Type: ${config_override_filter_type}"
1530 schoenebeck 563 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1531 iliev 716 echo "# Process Muted Channels: ${config_process_muted_channels}"
1532 schoenebeck 849 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1533 schoenebeck 1762 echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
1534 persson 830 echo "# Interpolate Volume: ${config_interpolate_volume}"
1535 schoenebeck 1364 echo "# Instruments database support: ${config_instruments_db}"
1536     if test "$config_instruments_db" = "yes"; then
1537     echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1538     fi
1539 schoenebeck 1212 echo "# Plugin Path: ${config_plugin_dir}"
1540 schoenebeck 1876 echo "#-------------------------------------------------------------------"
1541     echo "# MIDI Input Drivers:"
1542     echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack_midi}, CoreMIDI: ${config_have_coremidi}, MME: ${config_have_mme}, MidiShare: ${config_have_midishare}"
1543     echo "#-------------------------------------------------------------------"
1544     echo "# Audio Output Drivers:"
1545     echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack}, ARTS: ${config_have_arts}, CoreAudio: ${config_have_coreaudio}, ASIO: ${config_have_asio}"
1546     echo "#-------------------------------------------------------------------"
1547 iliev 2012 echo "# Sampler Engines:"
1548     echo "# GIG: yes, SF2: ${config_have_sf2}, SFZ: yes"
1549     echo "#-------------------------------------------------------------------"
1550 schoenebeck 2124 echo "# Effect plugin systems for internal effects:"
1551     echo "# LADSPA: yes"
1552     echo "#-------------------------------------------------------------------"
1553 schoenebeck 1876 echo "# Building sampler as plugin for following host standards:"
1554     echo "# DSSI: ${config_have_dssi}, LV2: ${config_have_lv2}, VST: ${config_have_vst}, AU: ${config_have_au}"
1555 schoenebeck 554 echo "#-------------------------------------------------------------------#"
1556     echo "# Read './configure --help' or file 'configure.in' for details. #"
1557     echo "#####################################################################"
1558     echo ""
1559     echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1560     echo ""

  ViewVC Help
Powered by ViewVC