/[svn]/linuxsampler/trunk/configure.ac
ViewVC logotype

Contents of /linuxsampler/trunk/configure.ac

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1931 - (show annotations) (download)
Sat Jul 4 14:58:34 2009 UTC (14 years, 8 months ago) by persson
Original Path: linuxsampler/trunk/configure.in
File size: 55002 byte(s)
* when cross-compiling, don't try to create instruments.db
* fix for new mingw-w64 version, which has usleep

1 AC_INIT(configure.in)
2
3 #------------------------------------------------------------------------------------
4 # LinuxSampler's / liblinuxsampler's "official" release version:
5
6 LINUXSAMPLER_RELEASE_MAJOR=0
7 LINUXSAMPLER_RELEASE_MINOR=5
8 LINUXSAMPLER_RELEASE_BUILD=1.12cvs
9
10 #------------------------------------------------------------------------------------
11 # The following is the libtool / shared library version. This doesn't have to
12 # do anything with the release version. It MUST conform to the following rules:
13 #
14 # 1. Start with version information of `0:0:0' for each libtool library.
15 # 2. Update the version information only immediately before a public release of
16 # your software. More frequent updates are unnecessary, and only guarantee
17 # that the current interface number gets larger faster.
18 # 3. If the library source code has changed at all since the last update, then
19 # increment revision (`c:r:a' becomes `c:r+1:a').
20 # 4. If any interfaces have been added, removed, or changed since the last update,
21 # increment current, and set revision to 0.
22 # 5. If any interfaces have been added since the last public release, then increment
23 # age.
24 # 6. If any interfaces have been removed since the last public release, then set age
25 # to 0.
26
27 LIBLINUXSAMPLER_LT_CURRENT=2
28 LIBLINUXSAMPLER_LT_REVISION=0
29 LIBLINUXSAMPLER_LT_AGE=1
30 SHARED_VERSION_INFO="$LIBLINUXSAMPLER_LT_CURRENT:$LIBLINUXSAMPLER_LT_REVISION:$LIBLINUXSAMPLER_LT_AGE"
31
32 #------------------------------------------------------------------------------------
33 # the LSCP specification version this LinuSampler release complies with:
34
35 LSCP_RELEASE_MAJOR=1
36 LSCP_RELEASE_MINOR=4
37
38 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MAJOR, ${LSCP_RELEASE_MAJOR}, [LSCP spec major version this release complies with.])
39 AC_DEFINE_UNQUOTED(LSCP_RELEASE_MINOR, ${LSCP_RELEASE_MINOR}, [LSCP spec minor version this release complies with.])
40
41 AC_PROG_CXX
42 AC_LIBTOOL_WIN32_DLL
43 AM_PROG_LIBTOOL
44
45 AC_SUBST(SHLIB_VERSION_ARG)
46 AC_SUBST(SHARED_VERSION_INFO)
47
48 AC_C_BIGENDIAN
49 AC_CANONICAL_HOST
50
51 PKG_PROG_PKG_CONFIG
52
53 ###########################################################################
54 # General Checks
55
56 AM_CONDITIONAL(CROSS_COMPILING, test $cross_compiling = yes)
57
58 AC_MSG_CHECKING([whether x86 architecture])
59 def_arch_x86=0
60 case $host_cpu in
61 "i386" | "i486" | "i586" | "i686" | "i786" | "x86_64")
62 echo "yes"
63 def_arch_x86=1;;
64 *)
65 echo "no";;
66 esac
67 AC_DEFINE_UNQUOTED(ARCH_X86,$def_arch_x86,[Define to 1 if you build for x86 architecture.])
68
69 # determine the right gcc switch for CPU specific optimizations
70 # (only if the user did not provide one)
71 CXX_CPU_SWITCH=
72 if ! echo "X $CXXFLAGS " | grep -q -- " \(-march=\|-mcpu=\|-mtune=\|-arch=\)" ; then
73 if test "$def_arch_x86" = 1 -a "$host_cpu" != "x86_64"; then
74 CXX_CPU_SWITCH="-march=$host_cpu"
75 elif test "$target_cpu" = "ppc"; then
76 CXX_CPU_SWITCH="-arch=$host_cpu"
77 fi
78 fi
79 AC_SUBST([CXX_CPU_SWITCH])
80
81 # check if we're on MS Windows
82 AC_CHECK_HEADERS(
83 mmsystem.h,
84 have_windows=1,
85 have_windows=0,
86 [#include <windef.h>]
87 )
88 AM_CONDITIONAL(HAVE_WINDOWS, test $have_windows = "1")
89
90 AC_MSG_CHECKING([whether UNIX98 compatible])
91 AC_LANG_SAVE
92 AC_LANG_C
93 AC_TRY_RUN([
94 #ifndef _GNU_SOURCE
95 #define _GNU_SOURCE 1
96 #endif
97 #include <features.h>
98 void main(void) {
99 #if _XOPEN_SOURCE >= 500
100 exit(0); /* UNIX98 compatible */
101 #else
102 exit(-1); /* not UNIX98 compatible */
103 #endif
104 }
105 ],
106 have_unix98="yes",
107 have_unix98="no",
108 have_unix98="no"
109 )
110 AC_LANG_RESTORE
111 AC_MSG_RESULT([$have_unix98])
112 if test "$have_unix98" = "no" -a "have_windows" = "0"; then
113 if test "x$HAVE_UNIX98" = "x"; then
114 echo "LinuxSampler only runs on UNIX98 compatible systems, which is mandatory for"
115 echo "pthread_mutexattr_settype() call in Mutex.cpp. You may want to run
116 echo "./configure with environment variable HAVE_UNIX98=1 in case you think you
117 echo "have a UNIX98 compatible system."
118 exit -1;
119 fi
120 fi
121
122 # check for <features.h>
123 AC_CHECK_HEADERS(features.h)
124
125 # test for POSIX thread library
126 m4_ifdef([m4_include(m4/pthread.m4)],,
127 [sinclude([m4/pthread.m4])])
128 ACX_PTHREAD
129 LIBS="$PTHREAD_LIBS $LIBS"
130 CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
131 CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
132 CC="$PTHREAD_CC"
133
134 # check for a bug in NPTL-enabled glibc
135 # (see Gentoo bug report #194076)
136 AC_ARG_ENABLE(nptl-bug-check,
137 [ --disable-nptl-bug-check
138 Disable check for a bug in certain NPTL-enabled
139 glibc versions that caused crashs.],
140 [config_check_nptl_bug="$enableval"],
141 [config_check_nptl_bug="yes"]
142 )
143 if test "$config_check_nptl_bug" = "yes"; then
144 m4_ifdef([m4_include(m4/nptl_bug.m4)],,
145 [sinclude([m4/nptl_bug.m4])])
146 ACX_NPTL_GLIBC_BUG([
147 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
148 echo "You seem to have a buggy PTHREAD library! LinuxSampler would"
149 echo "probably crash due to this. Please report us the system you are"
150 echo "using and/or file a bug report to the bug tracking system of"
151 echo "your distribution."
152 echo "If you have a NPTL-enabled glibc AND it was compiled for TLS as"
153 echo "well, you can try to circumvent this problem for now by setting"
154 echo "the environment variable LD_ASSUME_KERNEL=\"2.4.1\" , which"
155 echo "should cause this test to pass."
156 echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
157 AC_MSG_ERROR([possibly NPTL glibc bug detected])
158 ])
159 else
160 echo "NPTL glibc bug check disabled"
161 fi
162
163 # FIXME: this is actually a dependency of libgig, not of LS directly, why
164 # isn't it hidden by libgig?
165 AC_CHECK_HEADERS(uuid/uuid.h)
166 AC_SEARCH_LIBS(uuid_generate, uuid)
167
168
169
170 ###########################################################################
171 # Checks for available audio and MIDI systems / drivers
172 # (we throw an error if there's not at least one system for audio output and MIDI input available)
173
174 have_midi_input_driver="false"
175 have_audio_output_driver="false"
176
177 # ALSA
178 AC_ARG_ENABLE(alsa-driver,
179 [ --disable-alsa-driver
180 Disable support for the Advanced Linux Sound
181 Architecture (ALSA).],
182 [config_alsa_driver="$enableval"],
183 [config_alsa_driver="yes"]
184 )
185 have_alsa=0
186 if test "$config_alsa_driver" = "yes"; then
187 AC_CHECK_HEADER(alsa/asoundlib.h,
188 AC_CHECK_LIB(asound, main,
189 have_alsa=1
190 ,
191 have_alsa=0
192 )
193 ,
194 have_alsa=0
195 )
196 if test "$have_alsa" = "1"; then
197 have_midi_input_driver="true"
198 have_audio_output_driver="true";
199 fi
200
201 echo -n "checking Alsa version... "
202 AC_LANG_SAVE
203 AC_LANG_C
204 AC_TRY_RUN([
205 #include <alsa/asoundlib.h>
206 void main(void) {
207 /* ensure backward compatibility */
208 #if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
209 #define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
210 #endif
211 exit(SND_LIB_MAJOR);
212 }
213 ],
214 alsa_major=0,
215 alsa_major=$?,
216 alsa_major=0
217 )
218 AC_TRY_RUN([
219 #include <alsa/asoundlib.h>
220 void main(void) {
221 /* ensure backward compatibility */
222 #if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
223 #define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
224 #endif
225 exit(SND_LIB_MINOR);
226 }
227 ],
228 alsa_minor=0,
229 alsa_minor=$?,
230 alsa_minor=0
231 )
232 AC_TRY_RUN([
233 #include <alsa/asoundlib.h>
234 void main(void) {
235 /* ensure backward compatibility */
236 #if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
237 #define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
238 #endif
239 exit(SND_LIB_SUBMINOR);
240 }
241 ],
242 alsa_subminor=0,
243 alsa_subminor=$?,
244 alsa_subminor=0
245 )
246 AC_LANG_RESTORE
247 echo "$alsa_major.$alsa_minor.$alsa_subminor";
248 AC_DEFINE_UNQUOTED(ALSA_MAJOR,$alsa_major,[Define to the major version number of your Alsa installation.])
249 AC_DEFINE_UNQUOTED(ALSA_MINOR,$alsa_minor,[Define to the minor version number of your Alsa installation.])
250 AC_DEFINE_UNQUOTED(ALSA_SUBMINOR,$alsa_subminor,[Define to the subminor version number of your Alsa installation.])
251 else
252 echo "ALSA support disabled by configure script parameter"
253 fi
254 AM_CONDITIONAL(HAVE_ALSA, test $have_alsa = "1")
255 AC_DEFINE_UNQUOTED(HAVE_ALSA,$have_alsa,[Define to 1 if you have ALSA installed.])
256 config_have_alsa="no"
257 if test $have_alsa = "1"; then
258 config_have_alsa="yes"
259 fi
260
261 # JACK
262 AC_ARG_ENABLE(jack-driver,
263 [ --disable-jack-driver
264 Disable support for the Jack Audio Connection Kit
265 (JACK).],
266 [config_jack_driver="$enableval"],
267 [config_jack_driver="yes"]
268 )
269 have_jack=0
270 if test "$config_jack_driver" = "yes"; then
271 PKG_CHECK_MODULES(JACK, jack, have_jack=1, have_jack=0)
272 if test $have_jack = "1"; then
273 AC_SUBST(JACK_LIBS)
274 AC_SUBST(JACK_CFLAGS)
275 linuxsampler_save_LIBS=$LIBS
276 LIBS="$JACK_LIBS $LIBS"
277 AC_CHECK_FUNCS(jack_client_name_size jack_client_open)
278 LIBS=$linuxsampler_save_LIBS
279 have_audio_output_driver="true";
280 fi
281 else
282 echo "JACK support disabled by configure script parameter"
283 fi
284 AM_CONDITIONAL(HAVE_JACK, test $have_jack = "1")
285 AC_DEFINE_UNQUOTED(HAVE_JACK,$have_jack,[Define to 1 if you have JACK installed.])
286 config_have_jack="no"
287 if test $have_jack = "1"; then
288 config_have_jack="yes"
289 fi
290
291 # JACK MIDI
292 have_jack_midi=0
293 if test $have_jack = "1"; then
294 linuxsampler_save_CFLAGS=$CFLAGS
295 linuxsampler_save_LIBS=$LIBS
296 CFLAGS="$JACK_CFLAGS $CFLAGS"
297 LIBS="$JACK_LIBS $LIBS"
298 AC_CHECK_HEADER(jack/midiport.h, have_jack_midi=1, have_jack_midi=0)
299 if test $have_jack_midi = "1"; then
300 AC_CHECK_FUNCS(jack_midi_get_event_count)
301 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <jack/midiport.h>]], [[
302 jack_midi_clear_buffer(0, 0);
303 ]])], [AC_DEFINE(JACK_MIDI_FUNCS_NEED_NFRAMES, 1,
304 [Define to 1 if you have the old jack midi functions that need an nframes argument.])])
305 have_midi_input_driver="true"
306 fi
307 CFLAGS=$linuxsampler_save_CFLAGS
308 LIBS=$linuxsampler_save_LIBS
309 fi
310 AM_CONDITIONAL(HAVE_JACK_MIDI, test $have_jack_midi = "1")
311 AC_DEFINE_UNQUOTED(HAVE_JACK_MIDI, $have_jack_midi,
312 [Define to 1 if you have JACK with MIDI support installed.])
313 config_have_jack_midi="no"
314 if test $have_jack_midi = "1"; then
315 config_have_jack_midi="yes"
316 fi
317
318 # ARTS
319 AC_ARG_ENABLE(arts-driver,
320 [ --disable-arts-driver
321 Disable support for the Analogue Realtime System
322 (aRts).],
323 [config_arts_driver="$enableval"],
324 [config_arts_driver="yes"]
325 )
326 have_arts=0
327 if test "$config_arts_driver" = "yes"; then
328 m4_ifdef([m4_include(m4/arts.m4)],,
329 [sinclude([m4/arts.m4])])
330 AM_PATH_ARTS(0.9.5, have_arts=1, have_arts=0)
331 if test "$have_arts" = "1"; then
332 have_audio_output_driver="true"
333 fi
334 else
335 echo "ARTS support disabled by configure script parameter"
336 fi
337 AM_CONDITIONAL(HAVE_ARTS, test "$have_arts" = "1")
338 AC_DEFINE_UNQUOTED(HAVE_ARTS,$have_arts,[Define to 1 if you have aRts installed.])
339 config_have_arts="no"
340 if test $have_arts = "1"; then
341 config_have_arts="yes"
342 fi
343
344 # ASIO AUDIO (Win32)
345 AC_ARG_ENABLE(asiosdk-dir,
346 [ --enable-asiosdk-dir
347 Directory where the ASIO SDK is located, this automatically
348 enables the compilation of the ASIO audio output driver.],
349 [config_asiosdk_dir="${enableval}"],
350 [config_asiosdk_dir="."]
351 )
352 AC_SUBST(config_asiosdk_dir)
353
354 AC_ARG_ENABLE(asio-driver,
355 [ --disable-asio-driver
356 Disable support for the Windows ASIO driver.],
357 [config_asio_driver="$enableval"],
358 [config_asio_driver="yes"]
359 )
360 have_asio=0
361 ASIOSDK_BASEDIR=
362 if test "$config_asio_driver" = "yes"; then
363 asiosdk_headerfile=$config_asiosdk_dir/ASIOSDK2/common/asio.h
364 echo -n "checking for ASIO headerfile: $asiosdk_headerfile ...."
365 if test -e $asiosdk_headerfile ; then
366 echo yes
367 have_asio=1
368 ASIOSDK_BASEDIR="$config_asiosdk_dir"
369 else
370 echo no
371 have_asio=0
372 fi
373 if test "$have_asio" = "1"; then
374 have_audio_output_driver="true"
375 fi
376 else
377 echo "Windows ASIO support disabled by configure script parameter"
378 fi
379 AC_SUBST(ASIOSDK_BASEDIR)
380 AM_CONDITIONAL(HAVE_ASIO, test $have_asio = "1")
381 AC_DEFINE_UNQUOTED(HAVE_ASIO,$have_asio,[Define to 1 if you have ASIO installed.])
382 config_have_asio="no"
383 if test $have_asio = "1"; then
384 config_have_asio="yes"
385 fi
386
387 # MidiShare (Linux, OS X, Windows)
388 AC_ARG_ENABLE(midishare-driver,
389 [ --disable-midishare-driver
390 Disable support for the MidiShare system.],
391 [config_midishare_driver="$enableval"],
392 [config_midishare_driver="yes"]
393 )
394 have_midishare=0
395 if test "$config_midishare_driver" = "yes"; then
396 AC_CHECK_HEADER(MidiShare.h,
397 AC_CHECK_LIB(MidiShare, MidiCountEvs,
398 have_midishare=1,
399 have_midishare=0
400 )
401 ,
402 have_midishare=0
403 )
404 if test "$have_midishare" = "1"; then
405 have_midi_input_driver="true"
406 fi
407 else
408 echo "MidiShare support disabled by configure script parameter"
409 fi
410 AM_CONDITIONAL(HAVE_MIDISHARE, test $have_midishare = "1")
411 AC_DEFINE_UNQUOTED(HAVE_MIDISHARE,$have_midishare,[Define to 1 if you have MidiShare installed.])
412 config_have_midishare="no"
413 if test $have_midishare = "1"; then
414 config_have_midishare="yes"
415 fi
416
417 # CoreMIDI (OS X)
418 AC_ARG_ENABLE(coremidi-driver,
419 [ --disable-coremidi-driver
420 Disable support for the Apple CoreMIDI system.],
421 [config_coremidi_driver="$enableval"],
422 [config_coremidi_driver="yes"]
423 )
424 have_coremidi=0
425 if test "$config_coremidi_driver" = "yes"; then
426 AC_CHECK_HEADER(CoreMIDI/CoreMIDI.h,
427 have_coremidi=1,
428 have_coremidi=0
429 )
430 if test "$have_coremidi" = "1"; then
431 have_midi_input_driver="true"
432 fi
433 else
434 echo "CoreMIDI support disabled by configure script parameter"
435 fi
436 AM_CONDITIONAL(HAVE_COREMIDI, test $have_coremidi = "1")
437 AC_DEFINE_UNQUOTED(HAVE_COREMIDI,$have_coremidi,[Define to 1 if you have CoreMIDI installed.])
438 config_have_coremidi="no"
439 if test $have_coremidi = "1"; then
440 config_have_coremidi="yes"
441 fi
442
443 # CoreAudio (OS X)
444 AC_ARG_ENABLE(coreaudio-driver,
445 [ --disable-coreaudio-driver
446 Disable support for the Apple CoreAudio system.],
447 [config_coreaudio_driver="$enableval"],
448 [config_coreaudio_driver="yes"]
449 )
450 have_coreaudio=0
451 if test "$config_coreaudio_driver" = "yes"; then
452 AC_CHECK_HEADER(CoreAudio/CoreAudio.h,
453 have_coreaudio=1,
454 have_coreaudio=0
455 )
456 if test "$have_coreaudio" = "1"; then
457 have_audio_output_driver="true"
458 fi
459 else
460 echo "CoreAudio support disabled by configure script parameter"
461 fi
462 AM_CONDITIONAL(HAVE_COREAUDIO, test $have_coreaudio = "1")
463 AC_DEFINE_UNQUOTED(HAVE_COREAUDIO,$have_coreaudio,[Define to 1 if you have CoreAudio installed.])
464 config_have_coreaudio="no"
465 if test $have_coreaudio = "1"; then
466 config_have_coreaudio="yes"
467 fi
468
469 # MME MIDI (Win32)
470 AC_ARG_ENABLE(mmemidi-driver,
471 [ --disable-mmemidi-driver
472 Disable support for the Windows MME MIDI system.],
473 [config_mmemidi_driver="$enableval"],
474 [config_mmemidi_driver="yes"]
475 )
476 have_mmemidi=0
477 if test "$config_mmemidi_driver" = "yes"; then
478 AC_CHECK_HEADERS(mmsystem.h,
479 have_mmemidi=1,
480 have_mmemidi=0
481 )
482 if test "$have_mmemidi" = "1"; then
483 have_midi_input_driver="true"
484 fi
485 else
486 echo "MME MIDI support disabled by configure script parameter"
487 fi
488 AM_CONDITIONAL(HAVE_MME_MIDI, test $have_mmemidi = "1")
489 AC_DEFINE_UNQUOTED(HAVE_MME_MIDI,$have_mmemidi,[Define to 1 if you have MME MIDI installed.])
490 config_have_mme="no"
491 if test $have_mmemidi = "1"; then
492 config_have_mme="yes"
493 fi
494
495 # DSSI
496 AC_CHECK_HEADERS(dssi.h,
497 config_have_dssi="yes",
498 config_have_dssi="no")
499 AM_CONDITIONAL(HAVE_DSSI, test $config_have_dssi = "yes")
500
501 # LV2
502 PKG_CHECK_MODULES(LV2, lv2core, config_have_lv2="yes", config_have_lv2="no")
503 if test $config_have_lv2 = "no"; then
504 AC_CHECK_HEADER(lv2.h, config_have_lv2="yes", config_have_lv2="no")
505 fi
506 AM_CONDITIONAL(HAVE_LV2, test $config_have_lv2 = "yes")
507
508 # VST
509 AC_ARG_ENABLE(vstsdk-dir,
510 [ --enable-vstsdk-dir
511 Directory where the VST SDK is located.
512 This automatically enables the compilation
513 of the VST plugin.],
514 [VSTSDK_DIR="${enableval}"],
515 [VSTSDK_DIR=]
516 )
517 AC_SUBST(VSTSDK_DIR)
518 AM_CONDITIONAL(HAVE_VST, test "x$VSTSDK_DIR" != "x")
519 config_have_vst="no"
520 if test "x$VSTSDK_DIR" != "x"; then
521 config_have_vst="yes"
522 fi
523
524 # AU
525 AC_CHECK_HEADERS(AudioUnit/AudioUnit.h,
526 config_have_au="yes",
527 config_have_au="no")
528 AM_CONDITIONAL(HAVE_AU, test $config_have_au = "yes")
529 AM_CONDITIONAL(HAVE_AUFLAGS, test "$AUFLAGS" != "")
530
531
532 # have we found at least one MIDI input and one audio output driver ?
533 if test "$have_midi_input_driver" = "false"; then
534 echo "No supported MIDI input system found!"
535 echo "Sorry, LinuxSampler only supports the following MIDI drivers at the moment:"
536 echo "ALSA, JACK, MIDIShare, CoreMIDI, MME."
537 echo "If you think you have one of those available on your system, make sure you"
538 echo "also have the respective development (header) files installed."
539 exit -1;
540 fi
541 if test "$have_audio_output_driver" = "false"; then
542 echo "No supported audio output system found!"
543 echo "Sorry, LinuxSampler only supports ALSA, JACK, ARTS and ASIO as audio output"
544 echo "driver at the moment!"
545 exit -1;
546 fi
547
548
549
550 ###########################################################################
551 # Checks for various DLL libraries
552
553 # Check presence of libgig
554 libgig_version="3.2.1"
555 PKG_CHECK_MODULES(GIG, gig >= $libgig_version, HAVE_GIG=true, HAVE_GIG=false)
556 if test "$HAVE_GIG" = "false"; then
557 echo "Required libgig version not found!"
558 echo "You need to have libgig version ${libgig_version} installed!"
559 exit -1;
560 else
561 echo "yes, found libgig $libgig_version"
562 fi
563 AC_SUBST(GIG_CFLAGS)
564 AC_SUBST(GIG_LIBS)
565
566 # Instruments DB feature (requires SQLite 3.3)
567 AC_ARG_ENABLE(instruments-db,
568 [ --disable-instruments-db
569 Disable compilation of the sampler's instruments
570 database feature. You need to have SQLite 3.3
571 or younger installed for this feature.],
572 [config_instruments_db="$enableval"],
573 [config_instruments_db="yes"]
574 )
575 HAVE_SQLITE3=0;
576 if test "$config_instruments_db" = "yes"; then
577 # Check presence of sqlite3
578 sqlite_version="3.3"
579 PKG_CHECK_MODULES(SQLITE3, sqlite3 >= $sqlite_version, HAVE_SQLITE3=true, HAVE_SQLITE3=false)
580 AC_SUBST(SQLITE3_LIBS)
581 AC_SUBST(SQLITE3_CFLAGS)
582 if test $HAVE_SQLITE3 = false; then
583 HAVE_SQLITE3=0
584 config_instruments_db="no"
585 echo "*** Required sqlite version not found!"
586 echo "*** You need to have sqlite version ${sqlite_version} or higher"
587 echo "*** for instruments database support to be enabled."
588 echo "*** Support for instruments DB will be disabled!"
589 else
590 HAVE_SQLITE3=1
591 fi
592 else
593 echo "Instruments DB feature disabled by configure script parameter"
594 fi
595 AM_CONDITIONAL(HAVE_SQLITE3, test $HAVE_SQLITE3 = 1)
596 AC_DEFINE_UNQUOTED(HAVE_SQLITE3,$HAVE_SQLITE3,[Define to 1 if you want the instruments DB feature and have SQLITE3 installed.])
597
598
599
600 ###########################################################################
601 # Handle Configuration Options
602
603 # TODO: should we use AC_ARG_VAR(variable, description) instead?
604
605 AC_ARG_ENABLE(asm,
606 [ --disable-asm
607 Enable hand-crafted assembly optimizations
608 (default=on). LinuxSampler provides CPU specific
609 assembly optimizations. This is currently limited
610 to just enter a fast (denormal) FPU mode on x86
611 platforms. There are currently no synthesis core
612 assembly optimizations anymore since LS 0.4.0],
613 [config_asm="$enableval"],
614 [config_asm="yes"]
615 )
616 if test "$config_asm" = "yes"; then
617 AC_DEFINE_UNQUOTED(CONFIG_ASM, 1, [Define to 1 if you want to enable asm optimizations.])
618 fi
619
620 AC_ARG_ENABLE(dev-mode,
621 [ --enable-dev-mode
622 Enable development mode (default=off). In that mode
623 we do some extra sanity checks here and there.
624 This helps to spot possible problems, but reduces
625 efficiency a bit],
626 [config_dev_mode="$enableval"],
627 [config_dev_mode="no"]
628 )
629 if test "$config_dev_mode" = "yes"; then
630 AC_DEFINE_UNQUOTED(CONFIG_DEVMODE, 1, [Define to 1 if you want to enable development mode.])
631 fi
632
633 AC_ARG_ENABLE(debug-level,
634 [ --enable-debug-level
635 Specify verbosity of console messages (default=1).
636 The higher the value, the higher will be verbosity.
637 A value of 0 means no console output at all.
638 There's not really an upper limit but the usual
639 level of all messages is currently somewhere less
640 than 10.],
641 [config_debug_level="${enableval}"],
642 [config_debug_level="1"]
643 )
644 AC_DEFINE_UNQUOTED(CONFIG_DEBUG_LEVEL, $config_debug_level, [Define console verbosity.])
645
646 AC_ARG_ENABLE(rt-exceptions,
647 [ --enable-rt-exceptions
648 Enable exceptions in the realtime thread
649 (default=no). If this is enabled, exceptions will
650 be thrown on critical errors in the realtime
651 context as well. Otherwise if disabled
652 segmentation faults will be forced by the
653 application on critical errors.],
654 [config_rt_exceptions="$enableval"],
655 [config_rt_exceptions="no"]
656 )
657 if test "$config_rt_exceptions" = "yes"; then
658 AC_DEFINE_UNQUOTED(CONFIG_RT_EXCEPTIONS, 1, [Define to 1 to allow exceptions in the realtime context.])
659 fi
660
661 AC_ARG_ENABLE(pthread-testcancel,
662 [ --enable-pthread-testcancel
663 Enable pthread_testcancel() calls and avoid asynchronous
664 cancel of pthreads (default=no).],
665 [config_pthread_testcancel="$enableval"],
666 [config_pthread_testcancel="no"]
667 )
668 if test "$config_pthread_testcancel" = "yes"; then
669 AC_DEFINE_UNQUOTED(CONFIG_PTHREAD_TESTCANCEL, 1, [Define to 1 to enable pthread_testcancel() calls.])
670 fi
671
672 AC_ARG_ENABLE(preload-samples,
673 [ --enable-preload-samples
674 Due to seeking and latency issues with hard drives
675 we have to cache a small part of samples' head in
676 RAM (default=32768). The higher this value the
677 more memory will be occupied for each sample, but
678 the safer this will be in regards of possible
679 droputs. A 'good' value depends on the running
680 system and usage dependant factors.],
681 [config_preload_samples="${enableval}"],
682 [config_preload_samples="32768"]
683 )
684 AC_DEFINE_UNQUOTED(CONFIG_PRELOAD_SAMPLES, $config_preload_samples, [Define amount of sample points to be cached in RAM.])
685
686 AC_ARG_ENABLE(max-pitch,
687 [ --enable-max-pitch
688 Specify the maximum allowed pitch value in octaves
689 (default=4). To lower memory usage you might want
690 set a smaller value.],
691 [config_max_pitch="${enableval}"],
692 [config_max_pitch="4"]
693 )
694 AC_DEFINE_UNQUOTED(CONFIG_MAX_PITCH, $config_max_pitch, [Define max. allowed pitch.])
695
696 AC_ARG_ENABLE(max-events,
697 [ --enable-max-events
698 Specify the maximum allowed amount of events to be
699 processed per fragment (default=1024).],
700 [config_max_events="${enableval}"],
701 [config_max_events="1024"]
702 )
703 AC_DEFINE_UNQUOTED(CONFIG_MAX_EVENTS_PER_FRAGMENT, $config_max_events, [Define max. allowed events per fragment.])
704
705 AC_ARG_ENABLE(eg-bottom,
706 [ --enable-eg-bottom
707 Bottom limit of envelope generators
708 (default=0.001). Certain kinds of curve types like
709 exponential curves converge against 0 but never
710 reach 0. So we have to define a certain low value
711 after which we should consider all smaller values
712 to be 'almost zero'. The smaller this value, the
713 longer will voices survive in EG's release stage
714 and thus waste voices. If this value is too high
715 will cause click sounds though.],
716 [config_eg_bottom="${enableval}"],
717 [config_eg_bottom="0.001"]
718 )
719 AC_DEFINE_UNQUOTED(CONFIG_EG_BOTTOM, $config_eg_bottom, [Define bottom limit of envelopes.])
720
721 AC_ARG_ENABLE(eg-min-release-time,
722 [ --enable-eg-min-release-time
723 Specify the lowest allowed release time in seconds
724 (default=0.0025). This value will also be used to
725 ramp down voices on voice stealing. This value
726 should always be less than the period time of the
727 used audio driver, as in case of voice stealing
728 the killed voice needs to be completely ramped
729 down in the same fragment.],
730 [config_eg_min_release_time="${enableval}"],
731 [config_eg_min_release_time="0.0025"]
732 )
733 AC_DEFINE_UNQUOTED(CONFIG_EG_MIN_RELEASE_TIME, $config_eg_min_release_time, [Define min. release time.])
734
735 AC_ARG_ENABLE(refill-streams,
736 [ --enable-refill-streams
737 Number of streams that should be refilled in each
738 disk thread cycle (default=4).],
739 [config_refill_streams="${enableval}"],
740 [config_refill_streams="4"]
741 )
742 AC_DEFINE_UNQUOTED(CONFIG_REFILL_STREAMS_PER_RUN, $config_refill_streams, [Define amount of streams to be refilled per cycle.])
743
744 AC_ARG_ENABLE(stream-min-refill,
745 [ --enable-stream-min-refill
746 Minimum refill size for disk streams (default=1024).
747 The disk thread will go to sleep for a while if no
748 stream had to be refilled more than this value in
749 a disk thread cycle.],
750 [config_stream_min_refill="${enableval}"],
751 [config_stream_min_refill="1024"]
752 )
753 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MIN_REFILL_SIZE, $config_stream_min_refill, [Define min. stream refill size.])
754
755 AC_ARG_ENABLE(stream-max-refill,
756 [ --enable-stream-max-refill
757 Maximum refill size for disk streams
758 (default=65536). The disk thread will refill
759 each stream only by a size of this value per
760 disk thread cycle.],
761 [config_stream_max_refill="${enableval}"],
762 [config_stream_max_refill="65536"]
763 )
764 AC_DEFINE_UNQUOTED(CONFIG_STREAM_MAX_REFILL_SIZE, $config_stream_max_refill, [Define max. stream refill size.])
765
766 AC_ARG_ENABLE(stream-size,
767 [ --enable-stream-size
768 Size of each stream's ring buffer in sample points
769 (default=262144).],
770 [config_stream_size="${enableval}"],
771 [config_stream_size="262144"]
772 )
773 AC_DEFINE_UNQUOTED(CONFIG_STREAM_BUFFER_SIZE, $config_stream_size, [Define each stream's ring buffer size.])
774
775 AC_ARG_ENABLE(max-streams,
776 [ --enable-max-streams
777 Initial maximum amount of disk streams
778 (default=90). This value can be changed at
779 runtime. It should always be higher than the
780 maximum amount of voices.],
781 [config_max_streams="${enableval}"],
782 [config_max_streams="90"]
783 )
784 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_STREAMS, $config_max_streams, [Define initial max. streams.])
785
786 AC_ARG_ENABLE(max-voices,
787 [ --enable-max-voices
788 Initial maximum amount of voices (default=64).
789 This value can be changed at runtime. It should
790 always be lower than the maximum amount of disk
791 streams.],
792 [config_max_voices="${enableval}"],
793 [config_max_voices="64"]
794 )
795 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_MAX_VOICES, $config_max_voices, [Define initial max. voices.])
796
797 AC_ARG_ENABLE(subfragment-size,
798 [ --enable-subfragment-size
799 Every audio fragment will be splitted into
800 subfragments. Where each subfragment renders
801 audio with constant synthesis parameters. This is
802 done for efficiency reasons. This parameter
803 defines the default size of a subfragment in
804 sample points. A large value means less CPU time
805 whereas a low value means better audio quality
806 (default=32).],
807 [config_subfragment_size="${enableval}"],
808 [config_subfragment_size="32"]
809 )
810 AC_DEFINE_UNQUOTED(CONFIG_DEFAULT_SUBFRAGMENT_SIZE, $config_subfragment_size, [Define default subfragment size (in sample points).])
811
812 AC_ARG_ENABLE(global-attenuation-default,
813 [ --enable-global-attenuation-default
814 To prevent clipping all samples will be lowered
815 in amplitude by this given default factor (can
816 be overridden at runtime).
817 (default=0.35)],
818 [config_global_attenuation_default="${enableval}"],
819 [config_global_attenuation_default="0.35"]
820 )
821 AC_DEFINE_UNQUOTED(CONFIG_GLOBAL_ATTENUATION_DEFAULT, $config_global_attenuation_default, [Define default global volume attenuation (as floating point factor).])
822
823 AC_ARG_ENABLE(voice-steal-algo,
824 [ --enable-voice-steal-algo
825 Voice stealing algorithm to be used. Currently
826 available options:
827 none:
828 Disable voice stealing completely.
829 oldestvoiceonkey (default):
830 Try to kill a voice on the same key first,
831 if no success, proceed with the oldest key.
832 oldestkey:
833 Try to kill a voice from the oldest active
834 key.],
835 [ if test ! "(" "${enableval}" = "none" \
836 -o "${enableval}" = "oldestvoiceonkey" \
837 -o "${enableval}" = "oldestkey" ")" ; then
838 AC_MSG_ERROR([Unknown voice stealing algorithm for parameter --enable-voice-steal-algo])
839 else
840 config_voice_steal_algo="${enableval}"
841 fi
842 ],
843 [config_voice_steal_algo="oldestvoiceonkey"]
844 )
845 AC_DEFINE_UNQUOTED(CONFIG_VOICE_STEAL_ALGO, voice_steal_algo_${config_voice_steal_algo}, [Define voice stealing algorithm to be used.])
846
847 AC_ARG_ENABLE(sysex-buffer-size,
848 [ --enable-sysex-buffer-size
849 System Exclusive Message buffer size in kB
850 (default=2048).],
851 [config_sysex_buffer_size="${enableval}"],
852 [config_sysex_buffer_size="2048"]
853 )
854 AC_DEFINE_UNQUOTED(CONFIG_SYSEX_BUFFER_SIZE, $config_sysex_buffer_size, [Define SysEx buffer size.])
855
856 AC_ARG_ENABLE(force-filter,
857 [ --enable-force-filter
858 If enabled will force filter to be used even if
859 no usage was define in instrument patch files.
860 (default=no).],
861 [config_force_filter="$enableval"],
862 [config_force_filter="no"]
863 )
864 if test "$config_force_filter" = "yes"; then
865 AC_DEFINE_UNQUOTED(CONFIG_FORCE_FILTER, 1, [Define to 1 to force filter usage.])
866 fi
867
868 AC_ARG_ENABLE(filter-cutoff-min,
869 [ --enable-filter-cutoff-min
870 Minimum filter cutoff frequency in Hz
871 (default=100.0).],
872 [config_filter_cutoff_min="${enableval}"],
873 [config_filter_cutoff_min="100.0"]
874 )
875 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MIN, ${config_filter_cutoff_min}f, [Define min. filter cutoff frequency.])
876
877 AC_ARG_ENABLE(filter-cutoff-max,
878 [ --enable-filter-cutoff-max
879 Maximum filter cutoff frequency in Hz
880 (default=10000.0).],
881 [config_filter_cutoff_max="${enableval}"],
882 [config_filter_cutoff_max="10000.0"]
883 )
884 AC_DEFINE_UNQUOTED(CONFIG_FILTER_CUTOFF_MAX, ${config_filter_cutoff_max}f, [Define max. filter cutoff frequency.])
885
886 AC_ARG_ENABLE(override-cutoff-ctrl,
887 [ --enable-override-cutoff-ctrl
888 Override filter cutoff MIDI controller (default=no).
889 Note: you have to define the MIDI controller number
890 here, it's not a boolean parameter type! If this
891 option is used, controller number given by
892 instrument patch will be ignored and instead this
893 supplied value will be used.],
894 [config_override_cutoff_ctrl="${enableval}"],
895 [config_override_cutoff_ctrl="no"]
896 )
897 if test ! "$config_override_cutoff_ctrl" = "no"; then
898 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_CUTOFF_CTRL, $config_override_cutoff_ctrl, [Define to a MIDI controller number to override cutoff control.])
899 fi
900
901 AC_ARG_ENABLE(override-resonance-ctrl,
902 [ --enable-override-resonance-ctrl
903 Override filter resonance MIDI controller
904 (default=no). Note: you have to define the MIDI
905 controller number here, it's not a boolean
906 parameter type! If this option is used, controller
907 number given by instrument patch will be ignored
908 and instead this supplied value will be used.],
909 [config_override_resonance_ctrl="${enableval}"],
910 [config_override_resonance_ctrl="no"]
911 )
912 if test ! "$config_override_resonance_ctrl" = "no"; then
913 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_RESONANCE_CTRL, $config_override_resonance_ctrl, [Define to a MIDI controller number to override resonance control.])
914 fi
915
916 AC_ARG_ENABLE(override-filter-type,
917 [ --enable-override-filter-type
918 Override filter type (default=no). Options:
919 hp: for highpass
920 bp: for bandpass
921 br: for bandreject
922 lp: for lowpass
923 lpt: for lowpass turbo],
924 [ if test "${enableval}" = "hp" ; then
925 config_override_filter_type="::gig::vcf_type_highpass"
926 elif test "${enableval}" = "bp" ; then
927 config_override_filter_type="::gig::vcf_type_bandpass"
928 elif test "${enableval}" = "br" ; then
929 config_override_filter_type="::gig::vcf_type_bandreject"
930 elif test "${enableval}" = "lp" ; then
931 config_override_filter_type="::gig::vcf_type_lowpass"
932 elif test "${enableval}" = "lpt" ; then
933 config_override_filter_type="::gig::vcf_type_lowpassturbo"
934 elif test ! "${enableval}" = "no"; then
935 AC_MSG_ERROR([Unknown filter type for parameter --enable-override-filter-type])
936 fi
937 ],
938 [config_override_filter_type="no"]
939 )
940 if test ! "$config_override_filter_type" = "no"; then
941 AC_DEFINE_UNQUOTED(CONFIG_OVERRIDE_FILTER_TYPE, $config_override_filter_type, [Define to a filter type to always force that filter type.])
942 fi
943
944 AC_ARG_ENABLE(gs-checksum,
945 [ --enable-gs-checksum
946 Enable Roland General Synth SysEx checksum check
947 (default=no). If this is enabled, all GS SysEx
948 messages which do not provide a correct checksum
949 will be ignored. This is disabled by default as
950 not all devices honor GS checksums.],
951 [config_assert_gs_sysex_checksum="$enableval"],
952 [config_assert_gs_sysex_checksum="no"]
953 )
954 if test "config_assert_gs_sysex_checksum" = "yes"; then
955 AC_DEFINE_UNQUOTED(CONFIG_ASSERT_GS_SYSEX_CHECKSUM, 1, [Define to 1 if you want to enable GS SysEx check.])
956 fi
957
958 AC_ARG_ENABLE(portamento-time-min,
959 [ --enable-portamento-time-min
960 Minimum Portamento time in seconds
961 (default=0.1).],
962 [config_portamento_time_min="${enableval}"],
963 [config_portamento_time_min="0.1"]
964 )
965 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MIN, $config_portamento_time_min, [Define min. portamento time.])
966
967 AC_ARG_ENABLE(portamento-time-max,
968 [ --enable-portamento-time-max
969 Maximum Portamento time in seconds
970 (default=32).],
971 [config_portamento_time_max="${enableval}"],
972 [config_portamento_time_max="32"]
973 )
974 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_MAX, $config_portamento_time_max, [Define max. portamento time.])
975
976 AC_ARG_ENABLE(portamento-time-default,
977 [ --enable-portamento-time-default
978 Default Portamento time in seconds
979 (default=1).],
980 [config_portamento_time_default="${enableval}"],
981 [config_portamento_time_default="1"]
982 )
983 AC_DEFINE_UNQUOTED(CONFIG_PORTAMENTO_TIME_DEFAULT, $config_portamento_time_default, [Define default portamento time.])
984
985 AC_ARG_ENABLE(signed-triang-algo,
986 [ --enable-signed-triang-algo
987 Signed triangular wave algorithm to be used (e.g. for LFOs).
988 Currently available options:
989 intmath:
990 Uses integer math without any branch will then be
991 converted to floating point value for each sample point.
992 This int->float conversion might hurt on some systems.
993 intmathabs:
994 Similar to intmath but uses abs() function.
995 Depending on compiler and platrofm this could
996 perform better than integer math as it avoids
997 an extra integer multiply instruction.
998 diharmonic:
999 The triangular wave will be approximated by adding two
1000 sinusoidials. This solution might especially hurt on
1001 systems with weak floating point unit.
1002 benchmark (default):
1003 This is not an algorithm. Use this option if the
1004 appropriate algorithm should be automatically
1005 chosen by the configure script by performing a
1006 benchmark between the algorithms mentioned above.
1007 This will NOT work for cross compilation!],
1008 [ if test ! "(" "${enableval}" = "intmath" \
1009 -o "${enableval}" = "intmathabs" \
1010 -o "${enableval}" = "diharmonic" ")" ; then
1011 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-signed-triang-algo])
1012 else
1013 config_signed_triang_algo="${enableval}"
1014 fi
1015 ],
1016 [config_signed_triang_algo="benchmark"]
1017 )
1018
1019 AC_ARG_ENABLE(unsigned-triang-algo,
1020 [ --enable-unsigned-triang-algo
1021 Unsigned triangular wave algorithm to be used (e.g. for LFOs).
1022 Currently available options:
1023 intmath:
1024 Uses integer math without any branch will then be
1025 converted to floating point value for each sample point.
1026 This int->float conversion might hurt on some systems.
1027 intmathabs:
1028 Similar to intmath but uses abs() function.
1029 Depending on compiler and platrofm this could
1030 perform better than integer math as it avoids
1031 an extra integer multiply instruction.
1032 diharmonic:
1033 The triangular wave will be approximated by adding two
1034 sinusoidials. This solution might especially hurt on
1035 systems with weak floating point unit.
1036 benchmark (default):
1037 This is not an algorithm. Use this option if the
1038 appropriate algorithm should be automatically
1039 chosen by the configure script by performing a
1040 benchmark between the algorithms mentioned above.
1041 This will NOT work for cross compilation!],
1042 [ if test ! "(" "${enableval}" = "intmath" \
1043 -o "${enableval}" = "intmathabs" \
1044 -o "${enableval}" = "diharmonic" ")" ; then
1045 AC_MSG_ERROR([Unknown triangular wave algorithm for parameter --enable-unsigned-triang-algo])
1046 else
1047 config_unsigned_triang_algo="${enableval}"
1048 fi
1049 ],
1050 [config_unsigned_triang_algo="benchmark"]
1051 )
1052
1053 AC_ARG_ENABLE(process-muted-channels,
1054 [ --enable-process-muted-channels
1055 Enable processing of muted channels (default=no).
1056 In that mode all MIDI events in the muted channels
1057 will be processed. This will provide information
1058 about the active voices in the muted channels and
1059 will not discard notes, triggered in mute mode,
1060 when the channel is unmuted. But also will reduce
1061 the efficiency.],
1062 [config_process_muted_channels="$enableval"],
1063 [config_process_muted_channels="no"]
1064 )
1065 if test "$config_process_muted_channels" = "yes"; then
1066 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_MUTED_CHANNELS, 1, [Define to 1 if you want to enable processing of muted channels.])
1067 fi
1068
1069 AC_ARG_ENABLE(process-all-notes-off,
1070 [ --disable-process-all-notes-off
1071 Disable interpretation of All-Notes-Off MIDI
1072 messages (default=on). By default LS will release
1073 all voices whenever it receives an All-Notes-Off
1074 MIDI message. You can disable this behavior, so
1075 that LS simply ignores such messages.],
1076 [config_process_all_notes_off="$enableval"],
1077 [config_process_all_notes_off="yes"]
1078 )
1079 if test "$config_process_all_notes_off" = "yes"; then
1080 AC_DEFINE_UNQUOTED(CONFIG_PROCESS_ALL_NOTES_OFF, 1, [Define to 1 if you want to enable processing of All-Notes-Off MIDI messages.])
1081 fi
1082
1083 AC_ARG_ENABLE(interpolate-volume,
1084 [ --disable-interpolate-volume
1085 Disable interpolation of volume modulation
1086 (default=on). With this enabled, the volume changes
1087 generated by for example the envelope generator
1088 will be smoother, minimizing the risk for audio
1089 clicks. Disable it to reduce CPU usage.],
1090 [config_interpolate_volume="$enableval"],
1091 [config_interpolate_volume="yes"]
1092 )
1093 if test "$config_interpolate_volume" = "yes"; then
1094 AC_DEFINE_UNQUOTED(CONFIG_INTERPOLATE_VOLUME, 1, [Define to 1 if you want to enable interpolation of volume modulation.])
1095 fi
1096
1097 AC_ARG_ENABLE(master-volume-sysex-by-port,
1098 [ --enable-master-volume-sysex-by-port
1099 Whether global volume sysex message should be
1100 applied globally to the whole sampler or only to
1101 the sampler channels connected to the same MIDI
1102 input port on which the sysex message arrived on.
1103 By default global volume sysex messages apply
1104 globally to the whole sampler, since many MIDI
1105 devices behave that way.],
1106 [config_master_volume_sysex_by_port="$enableval"],
1107 [config_master_volume_sysex_by_port="no"]
1108 )
1109 if test "$config_master_volume_sysex_by_port" = "yes"; then
1110 AC_DEFINE_UNQUOTED(CONFIG_MASTER_VOLUME_SYSEX_BY_PORT, 1, [Define to 1 if you want global volume sysex message only be applied to the respective MIDI port.])
1111 fi
1112
1113 AC_ARG_ENABLE(plugin-dir,
1114 [ --enable-plugin-dir
1115 Directory where the sampler shall look for potential plugins,
1116 that is 3rd party shared libraries that should be loaded by
1117 the sampler on startup. By default the sampler will search
1118 for plugins in the subdirectory "plugins" below its own
1119 library directory.
1120 (i.e. /usr/local/lib/linuxsampler/plugins)],
1121 [config_plugin_dir="${enableval}"],
1122 [config_plugin_dir="${libdir}/linuxsampler/plugins"]
1123 )
1124 AC_SUBST(config_plugin_dir)
1125
1126 AC_ARG_ENABLE(default-instruments-db-location,
1127 [ --enable-default-instruments-db-location
1128 Only when instruments DB feature is enabled: file name
1129 which shall be taken as default location of the
1130 instruments DB file. This location can still be
1131 overridden at runtime with a command line switch.
1132 (default: /var/lib/linuxsampler/instruments.db)],
1133 [config_default_instruments_db_file="${enableval}"],
1134 [config_default_instruments_db_file="/var/lib/linuxsampler/instruments.db"]
1135 )
1136 AC_DEFINE_UNQUOTED(
1137 CONFIG_DEFAULT_INSTRUMENTS_DB_LOCATION,
1138 "$config_default_instruments_db_file",
1139 [Only when instruments DB feature is enabled: default location of the DB file.]
1140 )
1141 AC_SUBST(config_default_instruments_db_file)
1142
1143
1144 ###########################################################################
1145 # Automatic Benchmarks (to detect the best algorithms for the system)
1146
1147 AC_LANG_SAVE
1148
1149 if test "$config_signed_triang_algo" = "benchmark"; then
1150 echo -n "benchmarking for the best (signed) triangular oscillator algorithm... "
1151 AC_LANG_CPLUSPLUS
1152 AC_TRY_RUN([
1153 #define SIGNED 1
1154 #define SILENT 1
1155 #include "${srcdir}/benchmarks/triang.cpp"
1156 ],
1157 triang_signed=0,
1158 triang_signed=$?,
1159 triang_signed=0
1160 )
1161 if test "$triang_signed" = "2"; then
1162 config_signed_triang_algo="intmath"
1163 echo "integer math"
1164 elif test "$triang_signed" = "3"; then
1165 config_signed_triang_algo="diharmonic"
1166 echo "di harmonics"
1167 elif test "$triang_signed" = "5"; then
1168 config_signed_triang_algo="intmathabs"
1169 echo "integer math using abs()"
1170 else
1171 echo "Benchmark of signed triangular wave algorithms failed!"
1172 echo "Maybe you are doing cross compilation? In that case you have to select"
1173 echo "an algorithm manually with './configure --enable-signed-triang-algo=...'"
1174 echo "Call './configure --help' for further information or read configure.in."
1175 exit -1;
1176 fi
1177 else
1178 case "$config_signed_triang_algo" in
1179 intmath)
1180 triang_signed=2 ;;
1181 diharmonic)
1182 triang_signed=3 ;;
1183 intmathabs)
1184 triang_signed=5 ;;
1185 esac
1186 fi
1187 AC_DEFINE_UNQUOTED(CONFIG_SIGNED_TRIANG_ALGO, ${triang_signed}, [Define signed triangular wave algorithm to be used.])
1188
1189 if test "$config_unsigned_triang_algo" = "benchmark"; then
1190 echo -n "benchmarking for the best (unsigned) triangular oscillator algorithm... "
1191 AC_LANG_CPLUSPLUS
1192 AC_TRY_RUN([
1193 #define SIGNED 0
1194 #define SILENT 1
1195 #include "${srcdir}/benchmarks/triang.cpp"
1196 ],
1197 triang_unsigned=0,
1198 triang_unsigned=$?,
1199 triang_unsigned=0
1200 )
1201 if test "$triang_unsigned" = "2"; then
1202 config_unsigned_triang_algo="intmath"
1203 echo "integer math"
1204 elif test "$triang_unsigned" = "3"; then
1205 config_unsigned_triang_algo="diharmonic"
1206 echo "di harmonics"
1207 elif test "$triang_unsigned" = "5"; then
1208 config_unsigned_triang_algo="intmathabs"
1209 echo "integer math using abs()"
1210 else
1211 echo "Benchmark of unsigned triangular wave algorithms failed!"
1212 echo "Maybe you are doing cross compilation? In that case you have to select"
1213 echo "an algorithm manually with './configure --enable-unsigned-triang-algo=...'"
1214 echo "Call './configure --help' for further information or read configure.in."
1215 exit -1;
1216 fi
1217 else
1218 case "$config_unsigned_triang_algo" in
1219 intmath)
1220 triang_unsigned=2 ;;
1221 diharmonic)
1222 triang_unsigned=3 ;;
1223 intmathabs)
1224 triang_unsigned=5 ;;
1225 esac
1226 fi
1227 AC_DEFINE_UNQUOTED(CONFIG_UNSIGNED_TRIANG_ALGO, ${triang_unsigned}, [Define unsigned triangular wave algorithm to be used.])
1228
1229 AC_LANG_RESTORE
1230
1231
1232 ###########################################################################
1233 # Create Build Files
1234
1235 AM_CONFIG_HEADER(config.h)
1236 AM_INIT_AUTOMAKE(linuxsampler, "$LINUXSAMPLER_RELEASE_MAJOR.$LINUXSAMPLER_RELEASE_MINOR.$LINUXSAMPLER_RELEASE_BUILD")
1237
1238 AC_LANG_CPLUSPLUS
1239
1240 # autoconf 2.59/libtool 1.5.12 bug? work-around. Without a check like
1241 # this, the dlfcn.h check in am_prog_libtool may fail.
1242 AC_CHECK_HEADER(stdlib.h)
1243
1244 AC_OUTPUT( \
1245 Makefile \
1246 man/Makefile \
1247 man/linuxsampler.1 \
1248 src/Makefile \
1249 src/db/Makefile \
1250 src/network/Makefile \
1251 src/engines/Makefile \
1252 src/engines/gig/Makefile \
1253 src/engines/common/Makefile \
1254 src/effects/Makefile \
1255 src/common/Makefile \
1256 src/testcases/Makefile \
1257 src/drivers/Makefile \
1258 src/drivers/audio/Makefile \
1259 src/drivers/midi/Makefile \
1260 src/plugins/Makefile \
1261 src/hostplugins/Makefile \
1262 src/hostplugins/dssi/Makefile \
1263 src/hostplugins/lv2/Makefile \
1264 src/hostplugins/vst/Makefile \
1265 src/hostplugins/au/Makefile \
1266 linuxsampler.spec \
1267 debian/Makefile \
1268 Artwork/Makefile \
1269 scripts/Makefile \
1270 osx/Makefile \
1271 osx/linuxsampler.xcodeproj/Makefile \
1272 Documentation/Makefile \
1273 Documentation/Engines/Makefile \
1274 Documentation/Engines/gig/Makefile \
1275 linuxsampler.pc \
1276 Doxyfile \
1277 )
1278
1279 # resolve all nested variables in '${config_plugin_dir}'
1280 # (merely for providing a human readable summary below)
1281 while test $config_plugin_dir != `eval echo ${config_plugin_dir}` ; do
1282 config_plugin_dir=`eval echo ${config_plugin_dir}`
1283 done
1284
1285
1286 ###########################################################################
1287 # Output All Configuration Options
1288
1289 echo ""
1290 echo "#####################################################################"
1291 echo "# LinuxSampler Configuration #"
1292 echo "#-------------------------------------------------------------------#"
1293 echo "# Release Version: ${LINUXSAMPLER_RELEASE_MAJOR}.${LINUXSAMPLER_RELEASE_MINOR}.${LINUXSAMPLER_RELEASE_BUILD}"
1294 echo "# LSCP Version: ${LSCP_RELEASE_MAJOR}.${LSCP_RELEASE_MINOR}"
1295 echo "#-------------------------------------------------------------------"
1296 echo "# Assembly Optimizations: ${config_asm}"
1297 echo "# Development Mode: ${config_dev_mode}"
1298 echo "# Debug Level: ${config_debug_level}"
1299 echo "# Use Exceptions in RT Context: ${config_rt_exceptions}"
1300 echo "# Preload Samples: ${config_preload_samples}"
1301 echo "# Maximum Pitch: ${config_max_pitch} (octaves)"
1302 echo "# Maximum Events: ${config_max_events}"
1303 echo "# Envelope Bottom Level: ${config_eg_bottom} (linear)"
1304 echo "# Envelope Minimum Release Time: ${config_eg_min_release_time} s"
1305 echo "# Streams to be refilled per Disk Thread Cycle: ${config_refill_streams}"
1306 echo "# Minimum Stream Refill Size: ${config_stream_min_refill}"
1307 echo "# Maximum Stream Refill Size: ${config_stream_max_refill}"
1308 echo "# Stream Size: ${config_stream_size}"
1309 echo "# Default Maximum Disk Streams: ${config_max_streams}"
1310 echo "# Default Maximum Voices: ${config_max_voices}"
1311 echo "# Default Subfragment Size: ${config_subfragment_size}"
1312 echo "# Default Global Volume Attenuation: ${config_global_attenuation_default}"
1313 echo "# Voice Stealing Algorithm: ${config_voice_steal_algo}"
1314 echo "# Signed Triangular Oscillator Algorithm: ${config_signed_triang_algo}"
1315 echo "# Unsigned Triangular Oscillator Algorithm: ${config_unsigned_triang_algo}"
1316 echo "# SysEx Buffer Size: ${config_sysex_buffer_size} Byte"
1317 echo "# Min. Portamento Time: ${config_portamento_time_min} s"
1318 echo "# Max. Portamento Time: ${config_portamento_time_max} s"
1319 echo "# Default Portamento Time: ${config_portamento_time_default} s"
1320 echo "# Force Filter Usage: ${config_force_filter}"
1321 echo "# Filter Cutoff Minimum: ${config_filter_cutoff_min} Hz"
1322 echo "# Filter Cutoff Maximum: ${config_filter_cutoff_max} Hz"
1323 echo "# Override Filter Cutoff Controller: ${config_override_cutoff_ctrl}"
1324 echo "# Override Filter Resonance Controller: ${config_override_resonance_ctrl}"
1325 echo "# Override Filter Type: ${config_override_filter_type}"
1326 echo "# Assert GS SysEx Checksum: ${config_assert_gs_sysex_checksum}"
1327 echo "# Process Muted Channels: ${config_process_muted_channels}"
1328 echo "# Process All-Notes-Off MIDI message: ${config_process_all_notes_off}"
1329 echo "# Apply global volume SysEx by MIDI port: ${config_master_volume_sysex_by_port}"
1330 echo "# Interpolate Volume: ${config_interpolate_volume}"
1331 echo "# Instruments database support: ${config_instruments_db}"
1332 if test "$config_instruments_db" = "yes"; then
1333 echo "# Instruments DB default location: ${config_default_instruments_db_file}"
1334 fi
1335 echo "# Plugin Path: ${config_plugin_dir}"
1336 echo "#-------------------------------------------------------------------"
1337 echo "# MIDI Input Drivers:"
1338 echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack_midi}, CoreMIDI: ${config_have_coremidi}, MME: ${config_have_mme}, MidiShare: ${config_have_midishare}"
1339 echo "#-------------------------------------------------------------------"
1340 echo "# Audio Output Drivers:"
1341 echo "# ALSA: ${config_have_alsa}, JACK: ${config_have_jack}, ARTS: ${config_have_arts}, CoreAudio: ${config_have_coreaudio}, ASIO: ${config_have_asio}"
1342 echo "#-------------------------------------------------------------------"
1343 echo "# Building sampler as plugin for following host standards:"
1344 echo "# DSSI: ${config_have_dssi}, LV2: ${config_have_lv2}, VST: ${config_have_vst}, AU: ${config_have_au}"
1345 echo "#-------------------------------------------------------------------#"
1346 echo "# Read './configure --help' or file 'configure.in' for details. #"
1347 echo "#####################################################################"
1348 echo ""
1349 echo "Good. Now type 'make' to compile, followed by 'make install' as root."
1350 echo ""

  ViewVC Help
Powered by ViewVC