trunk/osx/autoconf_builder.sh

#!/bin/sh
# autoconf_builder.sh
# Created by Toshi Nagata on 07/04/18.
#
# Copyright 2007 Toshi Nagata.
#
# Redistribution and use in source and binary forms, with or without modification, are permitted 
# provided that the following conditions are met:
#
#   1. Redistributions of source code must retain the above copyright notice, this list of 
# conditions and the following disclaimer.
#   2. Redistributions in binary form must reproduce the above copyright notice, this list of 
# conditions and the following disclaimer in the documentation and/or other materials provided 
# with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, 
# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
# PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, 
# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED 
# TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
#  Influential environmental variables:
#  ACTION(*): autoconf - run "make -f Makefile.cvs"; configure - run "configure";
#               make - run "make"; install - run "make install";
#               build (or empty string) - autoconf && configure && make (&& install)
#               "install" step is only done if WITH_INSTALL is non-empty
#  BUILD_STYLE(*): The build style. If it ends with "ppc" or "i386", it also specifies the architecture.
#               If it ends with "UB" or "Universal", it creates the Universal Binaries for the products
#               specified by $UB_PRODUCTS (see below).
#               If any of the products are missing, then this script is recursively called for 
#               $BUILD_STYLE's that have "ppc" and "i386" in place of "UB" or "Universal".
#  WITH_INSTALL: When non-empty, "install" action is automatically done in "build" action.
#  CFLAGS, CXXFLAGS: Compiler flags
#  CONFIG_OPTIONS: Options for "configure"
#  BUILD_BASE_DIR: Temporary building and install directory. By default "$PWD/build". The source
#               tree is duplicated (by use of symbolic links) in $BUILD_BASE_DIR/$BUILD_STYLE/<basename>.build,
#               where <basename> is the basename of the toplevel directory of the source tree (which also
#               should be the current directory when this script is invoked). The product is "installed"
#               into $BUILD_BASE_DIR/$BUILD_STYLE/local.
#  SDKROOT: The root directory for SDK
#  UB_PRODUCTS: The products for which Universal Binaries are to be created. The paths should be
#               relative to $BUILD_BASE_DIR/$BUILD_STYLE/local. Eg. bin/some_executable, lib/some_library.a.
#
#  The variables marked with (*) are automatically set by Xcode.

BASE_DIR=$PWD
BASE_NAME=`basename $PWD`

function rel2abs () {
        (cd "$1"; pwd)
}

function abs2rel () {
        /usr/bin/perl -e 'use File::Spec; print File::Spec->abs2rel($ARGV[0], $ARGV[1]), "\n";' "$1" "$2"
}

function link_recursive () {
        local arg base i
        arg="$1"
        base=`basename "$arg"`
        if test -d "$arg"; then
                if expr "$base" = "CVS" "|" `rel2abs "$arg"` = "$BUILD_BASE_DIR" >/dev/null; then
                        echo "Skipping directory $arg"
                else
                        echo "Copying directory $arg"
                        mkdir -p "$base"
                        cd "$base"
                        if ! expr "$arg" : "^/" >/dev/null; then
                                arg="../$arg"
                        fi
                        for i in "$arg"/*; do
                                link_recursive "$i"
                        done
                        cd ..
                fi
        else
                echo "Linking $arg"
                ln -sf $arg
        fi
}

#  Sanity checks
if test "x$BUILD_STYLE" = "x"; then
        BUILD_STYLE="Default"
fi
if test "x$ACTION" = "x"; then
        ACTION="build"
fi
if test "x$BUILD_BASE_DIR" = "x"; then
        BUILD_BASE_DIR=$PWD/build
fi
mkdir -p "$BUILD_BASE_DIR" || exit $?
BUILD_BASE_DIR=`rel2abs "$BUILD_BASE_DIR"`

if test -e "$SDKROOT"; then
        SYSROOT_CFLAGS="-isysroot $SDKROOT"
else
        SYSROOT_CFLAGS=
fi
PATH="/usr/local/bin:$PATH"


ARCH_CFLAGS=""
ARCH_CONFIG_OPTIONS=""
case "$BUILD_STYLE" in
    *ppc)
        ARCH="ppc"
        ARCH_CFLAGS="-arch ppc"
        ;;
    *i386)
        ARCH="i386"
        ARCH_CFLAGS="-arch i386 -msse -msse2"
        ARCH_CONFIG_OPTIONS="--host=i386-apple-darwin8"
        ;;
        *UB)
        ARCH="UB"
        BUILD_STYLE_BASE=${BUILD_STYLE/UB/}
        ;;
    *Universal)
        ARCH="UB"       
        BUILD_STYLE_BASE=${BUILD_STYLE/Universal/}
        ;;
    *)
        echo "Warning: architecture cannot be recognized from the build style"
        ARCH="unknown"
        ;;
esac

case "$BUILD_STYLE" in
    Development|Default)
        OPT_CFLAGS="-O2 -g"
        ;;
    Deployment*)
        OPT_CFLAGS="-O3"
        ;;
esac

export CFLAGS="$SYSROOT_CFLAGS $ARCH_CFLAGS $OPT_CFLAGS $CFLAGS"
export CXXFLAGS="$SYSROOT_CFLAGS $ARCH_CFLAGS $OPT_CFLAGS $CXXFLAGS"

if test "x$ARCH" = "xUB" -a "x$ACTION" != "xclean"; then
        #  Test the existence of the products
        BUILD_STYLE_PPC=${BUILD_STYLE_BASE}ppc
        BUILD_STYLE_386=${BUILD_STYLE_BASE}i386
        for style in $BUILD_STYLE_PPC $BUILD_STYLE_386; do
                missing=no
                for i in $UB_PRODUCTS; do
                        if ! test -e "$BUILD_BASE_DIR/$style/local/$i"; then
                                missing=yes
                        fi
                done
                if test "$missing" = "yes"; then
                        BUILD_STYLE_SAVE=$BUILD_STYLE
                        export BUILD_STYLE=$style
                        echo "Building with BUILD_STYLE=$style"
                        /bin/sh $0 || exit $?
                        BUILD_STYLE=$BUILD_STYLE_SAVE
                fi
        done
        mkdir -p "$BUILD_BASE_DIR/$BUILD_STYLE/local" || exit $?
        cd "$BUILD_BASE_DIR"
        for i in $UB_PRODUCTS; do
                mkdir -p "$BUILD_STYLE/local/"`dirname $i` || exit $?
                echo "Creating universal binary $BUILD_STYLE/local/$i"
                lipo -create "$BUILD_STYLE_PPC/local/$i" "$BUILD_STYLE_386/local/$i" -output "$BUILD_STYLE/local/$i" || exit $?
        done
        exit $?
fi

#  Move to the working directory
BUILD_DIR="$BUILD_BASE_DIR/$BUILD_STYLE/$BASE_NAME.build"
mkdir -p "$BUILD_DIR"
BUILD_DIR=`rel2abs "$BUILD_DIR"`
CONFIG_OPTIONS="--prefix=$BUILD_BASE_DIR/$BUILD_STYLE/local $CONFIG_OPTIONS"

#  Display all environments
set

cd $BUILD_DIR

#  Clean if specified
if test "x$ACTION" = "xclean"; then
        # if test "x$WITH_INSTALL" != "x" -a -e "Makefile"; then
        #       echo "Doing make uninstall"
        #       make uninstall
        # fi
    echo "Removing files in $BUILD_DIR"
        cd $BASE_DIR
    rm -rf "$BUILD_DIR"
    exit $?
fi

if test "x$ACTION" = "xbuild" -o "x$ACTION" = "xconfigure"; then
        #  Copy the source files if necessary
        if test ! -e Makefile -a ! -e configure -a ! -e Makefile.cvs; then
                echo "Copying the source files to $BUILD_DIR"
                for i in `abs2rel "$BASE_DIR" "$BUILD_DIR"`/*; do
                        link_recursive $i
                done
        fi
        #  Make ./configure if necessary
        if test -e Makefile.cvs -a ! -e configure; then
                echo "Running make -f Makefile.cvs"
                make -f Makefile.cvs || exit $?
        fi
        #  Run ./configure if necessary
        if test -e configure -a ! -e Makefile; then
                CONFIG_ARGS="$CONFIG_OPTIONS $ARCH_CONFIG_OPTIONS $CONFIG_ENVS"
                echo "Running configure $CONFIG_ARGS"
                ./configure $CONFIG_ARGS || exit $?
        fi
fi

if test "x$ACTION" = "xbuild" -o "x$ACTION" = "xmake"; then
        #  make
        echo "Running make"
        make || exit $?
fi

#  make install if specified
if test "x$ACTION" = "xinstall" -o "(" "x$ACTION" = "xbuild" -a "x$WITH_INSTALL" != "x" ")"; then
    echo "Running make install"
    make install || exit $?
fi
1	#!/bin/sh
2	# autoconf_builder.sh
3	# Created by Toshi Nagata on 07/04/18.
4	#
5	# Copyright 2007 Toshi Nagata.
6	#
7	# Redistribution and use in source and binary forms, with or without modification, are permitted
8	# provided that the following conditions are met:
9	#
10	# 1. Redistributions of source code must retain the above copyright notice, this list of
11	# conditions and the following disclaimer.
12	# 2. Redistributions in binary form must reproduce the above copyright notice, this list of
13	# conditions and the following disclaimer in the documentation and/or other materials provided
14	# with the distribution.
15	#
16	# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
17	# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
18	# PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
19	# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
20	# TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
21	# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22	# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
23	# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
24	#
25	# Influential environmental variables:
26	# ACTION(*): autoconf - run "make -f Makefile.cvs"; configure - run "configure";
27	# make - run "make"; install - run "make install";
28	# build (or empty string) - autoconf && configure && make (&& install)
29	# "install" step is only done if WITH_INSTALL is non-empty
30	# BUILD_STYLE(*): The build style. If it ends with "ppc" or "i386", it also specifies the architecture.
31	# If it ends with "UB" or "Universal", it creates the Universal Binaries for the products
32	# specified by $UB_PRODUCTS (see below).
33	# If any of the products are missing, then this script is recursively called for
34	# $BUILD_STYLE's that have "ppc" and "i386" in place of "UB" or "Universal".
35	# WITH_INSTALL: When non-empty, "install" action is automatically done in "build" action.
36	# CFLAGS, CXXFLAGS: Compiler flags
37	# CONFIG_OPTIONS: Options for "configure"
38	# BUILD_BASE_DIR: Temporary building and install directory. By default "$PWD/build". The source
39	# tree is duplicated (by use of symbolic links) in $BUILD_BASE_DIR/$BUILD_STYLE/<basename>.build,
40	# where <basename> is the basename of the toplevel directory of the source tree (which also
41	# should be the current directory when this script is invoked). The product is "installed"
42	# into $BUILD_BASE_DIR/$BUILD_STYLE/local.
43	# SDKROOT: The root directory for SDK
44	# UB_PRODUCTS: The products for which Universal Binaries are to be created. The paths should be
45	# relative to $BUILD_BASE_DIR/$BUILD_STYLE/local. Eg. bin/some_executable, lib/some_library.a.
46	#
47	# The variables marked with (*) are automatically set by Xcode.
48
49	BASE_DIR=$PWD
50	BASE_NAME=`basename $PWD`
51
52	function rel2abs () {
53	(cd "$1"; pwd)
54	}
55
56	function abs2rel () {
57	/usr/bin/perl -e 'use File::Spec; print File::Spec->abs2rel($ARGV[0], $ARGV[1]), "\n";' "$1" "$2"
58	}
59
60	function link_recursive () {
61	local arg base i
62	arg="$1"
63	base=`basename "$arg"`
64	if test -d "$arg"; then
65	if expr "$base" = "CVS" "\|" `rel2abs "$arg"` = "$BUILD_BASE_DIR" >/dev/null; then
66	echo "Skipping directory $arg"
67	else
68	echo "Copying directory $arg"
69	mkdir -p "$base"
70	cd "$base"
71	if ! expr "$arg" : "^/" >/dev/null; then
72	arg="../$arg"
73	fi
74	for i in "$arg"/*; do
75	link_recursive "$i"
76	done
77	cd ..
78	fi
79	else
80	echo "Linking $arg"
81	ln -sf $arg
82	fi
83	}
84
85	# Sanity checks
86	if test "x$BUILD_STYLE" = "x"; then
87	BUILD_STYLE="Default"
88	fi
89	if test "x$ACTION" = "x"; then
90	ACTION="build"
91	fi
92	if test "x$BUILD_BASE_DIR" = "x"; then
93	BUILD_BASE_DIR=$PWD/build
94	fi
95	mkdir -p "$BUILD_BASE_DIR" \|\| exit $?
96	BUILD_BASE_DIR=`rel2abs "$BUILD_BASE_DIR"`
97
98	if test -e "$SDKROOT"; then
99	SYSROOT_CFLAGS="-isysroot $SDKROOT"
100	else
101	SYSROOT_CFLAGS=
102	fi
103	PATH="/usr/local/bin:$PATH"
104
105
106	ARCH_CFLAGS=""
107	ARCH_CONFIG_OPTIONS=""
108	case "$BUILD_STYLE" in
109	*ppc)
110	ARCH="ppc"
111	ARCH_CFLAGS="-arch ppc"
112	;;
113	*i386)
114	ARCH="i386"
115	ARCH_CFLAGS="-arch i386 -msse -msse2"
116	ARCH_CONFIG_OPTIONS="--host=i386-apple-darwin8"
117	;;
118	*UB)
119	ARCH="UB"
120	BUILD_STYLE_BASE=${BUILD_STYLE/UB/}
121	;;
122	*Universal)
123	ARCH="UB"
124	BUILD_STYLE_BASE=${BUILD_STYLE/Universal/}
125	;;
126	*)
127	echo "Warning: architecture cannot be recognized from the build style"
128	ARCH="unknown"
129	;;
130	esac
131
132	case "$BUILD_STYLE" in
133	Development\|Default)
134	OPT_CFLAGS="-O2 -g"
135	;;
136	Deployment*)
137	OPT_CFLAGS="-O3"
138	;;
139	esac
140
141	export CFLAGS="$SYSROOT_CFLAGS $ARCH_CFLAGS $OPT_CFLAGS $CFLAGS"
142	export CXXFLAGS="$SYSROOT_CFLAGS $ARCH_CFLAGS $OPT_CFLAGS $CXXFLAGS"
143
144	if test "x$ARCH" = "xUB" -a "x$ACTION" != "xclean"; then
145	# Test the existence of the products
146	BUILD_STYLE_PPC=${BUILD_STYLE_BASE}ppc
147	BUILD_STYLE_386=${BUILD_STYLE_BASE}i386
148	for style in $BUILD_STYLE_PPC $BUILD_STYLE_386; do
149	missing=no
150	for i in $UB_PRODUCTS; do
151	if ! test -e "$BUILD_BASE_DIR/$style/local/$i"; then
152	missing=yes
153	fi
154	done
155	if test "$missing" = "yes"; then
156	BUILD_STYLE_SAVE=$BUILD_STYLE
157	export BUILD_STYLE=$style
158	echo "Building with BUILD_STYLE=$style"
159	/bin/sh $0 \|\| exit $?
160	BUILD_STYLE=$BUILD_STYLE_SAVE
161	fi
162	done
163	mkdir -p "$BUILD_BASE_DIR/$BUILD_STYLE/local" \|\| exit $?
164	cd "$BUILD_BASE_DIR"
165	for i in $UB_PRODUCTS; do
166	mkdir -p "$BUILD_STYLE/local/"`dirname $i` \|\| exit $?
167	echo "Creating universal binary $BUILD_STYLE/local/$i"
168	lipo -create "$BUILD_STYLE_PPC/local/$i" "$BUILD_STYLE_386/local/$i" -output "$BUILD_STYLE/local/$i" \|\| exit $?
169	done
170	exit $?
171	fi
172
173	# Move to the working directory
174	BUILD_DIR="$BUILD_BASE_DIR/$BUILD_STYLE/$BASE_NAME.build"
175	mkdir -p "$BUILD_DIR"
176	BUILD_DIR=`rel2abs "$BUILD_DIR"`
177	CONFIG_OPTIONS="--prefix=$BUILD_BASE_DIR/$BUILD_STYLE/local $CONFIG_OPTIONS"
178
179	# Display all environments
180	set
181
182	cd $BUILD_DIR
183
184	# Clean if specified
185	if test "x$ACTION" = "xclean"; then
186	# if test "x$WITH_INSTALL" != "x" -a -e "Makefile"; then
187	# echo "Doing make uninstall"
188	# make uninstall
189	# fi
190	echo "Removing files in $BUILD_DIR"
191	cd $BASE_DIR
192	rm -rf "$BUILD_DIR"
193	exit $?
194	fi
195
196	if test "x$ACTION" = "xbuild" -o "x$ACTION" = "xconfigure"; then
197	# Copy the source files if necessary
198	if test ! -e Makefile -a ! -e configure -a ! -e Makefile.cvs; then
199	echo "Copying the source files to $BUILD_DIR"
200	for i in `abs2rel "$BASE_DIR" "$BUILD_DIR"`/*; do
201	link_recursive $i
202	done
203	fi
204	# Make ./configure if necessary
205	if test -e Makefile.cvs -a ! -e configure; then
206	echo "Running make -f Makefile.cvs"
207	make -f Makefile.cvs \|\| exit $?
208	fi
209	# Run ./configure if necessary
210	if test -e configure -a ! -e Makefile; then
211	CONFIG_ARGS="$CONFIG_OPTIONS $ARCH_CONFIG_OPTIONS $CONFIG_ENVS"
212	echo "Running configure $CONFIG_ARGS"
213	./configure $CONFIG_ARGS \|\| exit $?
214	fi
215	fi
216
217	if test "x$ACTION" = "xbuild" -o "x$ACTION" = "xmake"; then
218	# make
219	echo "Running make"
220	make \|\| exit $?
221	fi
222
223	# make install if specified
224	if test "x$ACTION" = "xinstall" -o "(" "x$ACTION" = "xbuild" -a "x$WITH_INSTALL" != "x" ")"; then
225	echo "Running make install"
226	make install \|\| exit $?
227	fi